Documente Academic
Documente Profesional
Documente Cultură
uk
LD26 IP68 is a reflector based linear system, designed to produce a continuous, even
wash with the latest in LED technology. By mounting the LEDs within a linear reflector,
there is no uneven spotting from lenses or loss of output from just using the LED itself.
It comes in two versions, LD26 with a symmetric 82deg reflector and the LD26A with
an asymmetric reflector tilted at 8deg.
LD26 IP68 offers great flexibility to the designer, with a range of options that suit
most applications, details and project budgets. Drive currents of 350mA (LD26-350)
or 500mA (LD26-500) can be specified. Symmetric and asymmetric reflectors are
now available, and are both highly efficient. LED spacing of 50, 75 and 100mm are
available, allowing cost savings with less LEDs and fewer drivers whilst still achieving
the desired effect.
Lengths are custom made to suit, to a maximum of 2 metres. Fixing is by spring clips
which allow adjustment and focusing once it has been installed.
Specification
Applications Underwater, Exterior, Linear, Wall washing
Ø44
*LED watts allows for 85% efficient driver
**Data shown is for 50mm spacing, and allows for an ambient temperature of 35°C
10
(Dimensions in mm)
Data sheet issued: 18th March, 2015 LightGraphix reserve the right to change specifications without notice
Te l e p h o n e 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
10
45
48
(Dimensions in mm)
Photometrics OrderCodes
Order Codesand
andOptions
Options
Photometric files are included in the design pack which can be downloaded Product code LED LED Product Fixing Length
from the LD26/LD26A IP68 product page on the website. colour spacing colour option
LD26(A) - 350 IP68
- 500 IP68
LED spacing
50mm /50
75mm /75
100mm /100
Product colour
Silver anodised (end caps are stainless steel)
Fixing options
Spring clips /SC
Data sheet issued: 18th March, 2015 LightGraphix reserve the right to change specifications without notice