Documente Academic
Documente Profesional
Documente Cultură
•
1. Mounting Types
Each mounting type can be configured with stem lengths (Lo) and materials indicated
in the table below. Floats and float stop collars are of same material specified for
mounting.
Type A
Type B Type C
1" NPT
3" NPT 3",150# Flange
1/2" NPT
1-3/8" HEX (PVC)
1-3/16" HEX
(PP OR PVDF) '\ t
2-5/8" REF
(666 mm)
¡ ¡
2. Float Types
Float Material PVC Polypropylene PVDF I
rI -t
Float Dimensions
~-t (58r)
2.28" ~-t
r
2.28"
(58 m)
_1
2.28"
(58 mm)
L 284 Dia. J
(72 mm)
L 284 Dia. I L2WiaJ
(72 mm) - (72 mm)
Operating Temperature
See Ratings Chart at top 01 lollowing page
and Pressure
Min. Liquid Specific
0.60 0.40 0.75
Gravity
Note: Floats are always supplied in same material as specified for mounting.
LSP-800 Series / p1 012 /3-APR-14 Visit www.GemsSensors.com for most current information.
tGJms"'-----------------------
Sensors & Controls
GROUPI GROUPII GROUP III GROUPIV L2 Yellow Yellow Yellow Yellow WhlYel Yellow WhlYel Wh/BlklYel
SPST SPST SPDT SPDT L3 Blue Blue Blue Blue Wh/Blue Blue Wh/Blu Wh/Blk/Blu
L4 Brown Brown Brown Brown Wh/Brn Brown Wh/Brn Wh/Blk/Brn
L5 Orange Orange Orange Orange Wh/Orn Orange Wh/Orn Wh/Blk/Orn
L6 Gray Gray Gray Gray Wh/Gra Gray Wh/Gra Wh/Blk/Gra
Notes: See "Electrical Data" on page X-5 for more information.
Actuation Levels' - Typical Switch actuation levels are determ ined following the
guidelines below.
A = 2-1/16" (52.4 mm) ± 1/16" minimum distance to
A
centerline of float (ref. mounting).
t B = 2-11/16"(68.3 mm) ±1/16"minimum distanceto
centerline of float (ref. stem end).
L3
__
1 e = 3-1/2" (88.9 mm) minimum distance between
L2 actuation levels.
O = Distance between actuation levels using one float.
L1 LO
(LENGTH Minimum = 1/4" (6.3 mm)
OVERALL)"
Maximum = 3-1/2" (88.9 mm)
Notes:
1. The centerline of the float is used as a standard reference for
actuating the switches.
2. Alllevels are set on descending float travel with overtravel = 1/4"
(6.3mm) ± 1/8" (3.2mm).
Overtravel on Ascending = 1/8" (3.2mm) mino
7/16,,_j -1 3. Tolerance on all actuation levels is ±1/8" (3.2 mm) Ref.
Visit www.GemsSensors.com for most current information. LSP-800 Series I p2of2 I 3-APR-14