Documente Academic
Documente Profesional
Documente Cultură
User’s Guide
Guía del Usuario
OFA 8L with Learning Owners Manual.fm Page 1 Monday, January 24, 2005 10:04 AM
OWNER’S MANUAL
Table of Contents 1
OFA 8L with Learning Owners Manual.fm Page 2 Monday, January 24, 2005 10:04 AM
2 Introduction
OFA 8L with Learning Owners Manual.fm Page 3 Monday, January 24, 2005 10:04 AM
OWNER’S MANUAL
KEY CHARTS Use the Cursor Keys
The LED (red light), to move the cursor in
which is located the program guide
underneath the and menu screens.
POWER Key, blinks to Use OK to choose
show that the remote options from your
control is working selected device’s
and is sending menu or guide.
signals.
In the RCVR/AMP
Press TV, CBL/SAT, mode, use OK to set
VCR, DVD, CD, PVR, the surround
AUD or AUX once to
select a desired home sound.Use
entertainment device
to control. (or ) to adjust
the volume higher (or
Press POWER once to
turn on or off the
lower).Use
selected device. For
master power control,
see “Programming a (or ) to adjust the
Master Power Macro” balance left (or right).
on page 10.
Use VOL + (or VOL -)
Press MENU once to to raise (or lower) the
display your selected sound volume.
device’s main menu.
Use GUIDE to display Press MUTE once to
your selected device’s turn the sound off or
program guide or on.
setup menu.
Use EXIT to exit from In TV, VCR, DVD or
your selected device’s CBL/SAT modes, use
guide or menu. FAV to scan favorite
channels and/or all
Use INFO to display channels. (See “Using
the current channel Channel Scan” on
and program page 11 and
information. “Programming
Favorite Channel
Scan” on page 12.)
OWNER’S MANUAL
❷ ❷
6 Installing Batteries
OFA 8L with Learning Owners Manual.fm Page 7 Monday, January 24, 2005 10:04 AM
OWNER’S MANUAL
4. Test the remote control by first control of a second device type (e.g., a second
pressing POWER and then any mode VCR; see “Re-assigning Device Keys” on
key (e.g., TV). If the batteries are page 13).
inserted correctly, the LED (red light)
3. Press and hold SET until the LED (red
will blink once.
light) blinks twice, then release SET.
NOTE: When batteries are low, the remote 4. Use the “Manufacturer’s Codes
control will blink 5 times after each key press. (Códigos del Fabricante)” (starting on
The remote will stop operating when the page 42) to locate the type of device
batteries need replacement. The permanent and brand name and then enter the
memory retention ensures that your codes first four-digit code for your device. If
are stored permanently even during battery performed correctly, the LED will
replacement. blink twice.
NOTE: If the LED did not blink twice, repeat
SETTING UP YOUR steps 2 through 4 and enter the same code
COMPONENTS again.
5. Aim the remote control at the device
The One For All 8L Universal Remote
and press POWER once. The device
Control with Learning (URC-8820 B00) is
should turn off. If it does not, repeat
preprogrammed at the factory to operate an
steps 2 through 5, trying each code for
Sony TV, DVD and VCR, a Motorola Cable
your brand until you find one that
Box, a Sony Tivo PVR/DVR, a Pioneer
works. If it still doesn’t work, try
Receiver and CD, and a Sony Receiver (in
“Searching for Your Code” on page 8.
the AUX Mode). To control devices other
than the default brands, perform the NOTE: If the device does not have a POWER
following steps; otherwise skip this section.
key, press the (PLAY) key.
NOTE: For Combo Device control, see the next
6. Repeat steps 1 through 5 for each
section.
device you want to control. For future
1. Turn on a device (e.g., TV, VCR or DVD reference, write down each working
player) and, if applicable, insert media device code in the following boxes:
(e.g., cassette or disc).
TV Code:
NOTE: Please read steps 2 through 4
completely before proceeding. Highlight or
write down the codes and device you wish to
Brand Name:_____________________
program before starting step 2.
VCR Code:
2. On the remote control, press a device
key once (i.e., TV, CBL/SAT, VCR, DVD,
CD, PVR, AUD or AUX).
Brand Name:_____________________
NOTE: Use the AUX key to program control of
an audio device such as an AMP, HTIB CD Code:
(Home theater in a box), or a tuner.
Alternately, use the AUX key to program
OWNER’S MANUAL
at all, try searching for your code. For 1. On the remote control, press TV once.
example, to search for a code for your TV: 2. Press and hold SET until the LED (red
1. Turn on your TV and on the remote light) blinks twice, then release SET.
control, press TV once. 3. Enter 9 9 0. The LED will blink twice.
2. Press and hold SET until the LED (red 4. To view the code for the first digit,
light) blinks twice, then release SET. press 1 once. Wait 3 seconds, count the
3. Enter 9 9 1. The LED will blink twice. LED blinks (e.g., three blinks = 3) and
write down the number in the leftmost
4. Select a test function from the list
box in the TV code boxes on page 7.
below or use the default test function
(POWER) and skip step 4. NOTE: If a code digit is 0, the LED will not
blink.
NOTE: The keys that can be used for the test
function are 0, 1, 2, 3, POWER, VOL +, Play, 5. Repeat step 4 three more times for
Stop and Mute. remaining digits. Use 2 for the second
digit, 3 for the third digit, and 4 for the
5. Press CH+ to begin searching for your
fourth digit. Write down the code
code. Stop the search when the device
digits in the remaining TV code boxes
turns off or performs the function
on page 7.
selected in step 4 (if other than
POWER). 6. To check for codes of other devices,
repeat steps 1 through 5, but substitute
NOTE: In the search mode, the remote control
the appropriate device key for each
will send IR codes from its library to the
device you are checking. Write down
selected device, starting with the most
the device’s code digits in the
popular code first. Every press of CH+ will
appropriate code boxes on page 7.
send a new code. If you go past the code that
performed the Test Function, you can go back
by pressing CH-. USING MACROS
6. To lock in the code, press and release You can program the M1 and M2 keys on
the SET key. The LED blinks twice. your One For All 8L Universal Remote
7. To search for the codes of your other Control with Learning (URC-8820 B00) to
devices, repeat steps 1 through 6, but perform repetitive, time-consuming
substitute the appropriate device key operations for easy, convenient access
for the device you are searching for in through the press of a single key.
step 1. Macro keys are ideal for home theater
operations, setting a favorite channel, guide
CHECKING THE CODES steps, or other multiple functions you would
like to control with one key press. Moreover,
If you have set up the remote control using each macro key can hold up to a total of 20
the Searching For Your Code procedure, you key presses.
may need to find out which four-digit code
NOTE: Programming a new macro over an
is operating your equipment. For example,
existing one will erase the original macro.
to find out which code is operating your TV:
10 Using Macros
OFA 8L with Learning Owners Manual.fm Page 11 Monday, January 24, 2005 10:04 AM
OWNER’S MANUAL
the remote control will be set to control the 1. After programming, point the remote
first powered-on device. control at the receiver and press the
DVD key for at least 2 seconds. This will
NOTE: If one or more devices does not have a
switch the Receiver's input to input 3,
POWER key, the power off/on sequence may
to allow you to view the DVD.
be slightly delayed when the remote control
signals the device(s).This action is normal. NOTE: When you press the device key (e.g.,
DVD) for less than 2 seconds, the remote will
PROGRAMMING A MACRO ON A DEVICE KEY only select the DVD mode but will not change
In its default state, when you press a device the Input on the receiver. This allows you to
key (e.g., TV) on the One For All 8L still change modes while using the remote.
Universal Remote Control with Learning NOTE: After executing the Device Key Macro,
(URC-8820 B00), the remote will switch to the remote will return to the DVD mode, to
that selected device. However, you can also allow the control of the DVD device.
program a Macro onto the Device keys to
allow for additional functionality. For CLEARING A MACRO
example, if your devices are connected to a
1. Press and hold SET until the LED (red
receiver unit, you can program a Device
light) blinks twice, then release SET.
macro to switch the receiver's input to the
selected device. 2. Enter 9 9 5. The LED will blink twice.
To Program the Device Key Macro 3. Select a macro key (e.g., M1, M2,
For example, let's assume that your DVD in POWER or any device key) you want to
connected to Input 3 of your receiver. You clear and press it once.
can program a macro that will switch the 4. Press and hold SET until the LED
receiver's input to input 3 when you press blinks twice, then release SET. The
and hold the DVD key. macro is now deleted but the keys (in
1. Press and hold SET until the LED (red the case of POWER and device keys),
light) blinks twice, then release SET. will retain their original function.
OWNER’S MANUAL
high frequency ones, and other 8. To lock in new feature(s) on the One
unusual formats. For All 8L Universal Remote Control
with Learning (URC-8820 B00), press
• For optimum learning, avoid high
and hold SET until the LED blinks
levels of ambient light such as natural
twice, then release SET.
sunlight or energy-efficient fluorescent
lights. 9. To test a learned feature, press a device
key (e.g., TV) once where the learning
NOTE: Please have your original remote
mode was assigned. Then press the
controls handy before programming learning.
learning key (e.g., +100) where the
Be sure to press each teaching key within 5
learned feature is stored.
seconds of the previous entry. Otherwise, the
One For All 8L Universal Remote Control
with Learning (URC-8820 B00) exits the DELETING FUNCTIONS FROM THE LEARNING
learning mode. KEYS
1. Press and hold SET until the LED (red
PROGRAMMING A LEARNING KEY light) blinks twice, then release SET.
1. Press and hold SET until the LED (red 2. Enter 9 7 6. The LED will blink twice.
light) blinks twice, then release SET. 3. Press the device key once where the
2. Enter 9 7 5. The LED will blink twice. learned feature is stored (e.g., TV).
3. Press a device key once (e.g., TV) to 4. Press the learning key (e.g., +100) to
assign a mode for learning. be deleted twice. The LED will blink
4. Press the desired key once (e.g., +100) twice after the second press.
to store a feature to be learned. The 5. To clear additional functions stored on
LED will turn on and remain on for 5 other learning keys, repeat steps 1
seconds. If the LED does not turn on, through 4 (in this section).
go back to step 1 and start again.
5. Place your original remote control RE-ASSIGNING DEVICE
(e.g., TV remote control) head-to-head KEYS
(about 2" apart) from the One For All
8L Universal Remote Control with You can set the One For All 8L Universal
Learning (URC-8820 B00). Remote Control with Learning (URC-8820
6. On your original remote control, press B00) to control a second TV, VCR, DVD
and hold the key (i.e., feature) to be player, or other device. For example, to
learned until the LED on the One For control a TV, a cable box, and two DVDs,
All 8L Universal Remote Control with you will need to re-assign the unused AUX
Learning (URC-8820 B00) turns off key to operate the second DVD as follows:
and then blinks twice. If the LED does 1. On the remote control, press and hold
not blink twice, repeat steps 3 through SET until the LED (red light) blinks
6. twice, then release SET.
7. To learn functions onto other learning 2. Enter 9 9 2. The LED will blink twice.
keys (e.g., M1 and M2), repeat steps 3
through 6. 3. Press DVD once, then press AUX once.
14 Using Keymover
OFA 8L with Learning Owners Manual.fm Page 15 Monday, January 24, 2005 10:04 AM
OWNER’S MANUAL
2. Press and hold SET until the LED (red 3. Now, when you press VOL +, VOL -, or
light) blinks twice, then release SET. MUTE, the volume of the selected
3. Enter 9 9 4. The LED will blink twice. device (e.g., TV) will be controlled
regardless of the mode you have
4. Press the destination key twice (where selected.
the keymoved key is stored). The LED
will blink twice.
UNLOCKING VOLUME CONTROL FOR A
Restoring All Keymoved Keys in a Single SINGLE DEVICE (INDIVIDUAL VOLUME
Mode
1. Press and hold SET until the LED (red
UNLOCK)
light) blinks twice, then release SET. 1. After performing Global Volume Lock
(see left), press a desired mode key
2. Enter 9 9 4. The LED will blink twice. where you want volume to be unlocked
3. Press the destination mode twice (e.g., AUD) and controlled within its
(where keymoved keys are stored). The own mode.
LED will blink twice. 2. Press and hold SET until the LED (red
light) blinks twice, then release SET.
CHANGING VOLUME LOCK 3. Enter 9 9 3 and then press VOL - once.
The LED will blink four times.
The One For All 8L Universal Remote
Control with Learning (URC-8820 B00) is 4. If desired, repeat steps 1 through 3 (of
set at the factory for independent volume this section) for each device that you
control of each selected device. want volume to be unlocked.
However, you may change the Volume Lock 5. Now, after you select a device that has
setting to Global Volume Lock so that a volume unlocked (e.g., AUD), pressing
device’s volume will be locked to one mode VOL +, VOL -, or MUTE, will control the
(e.g., to control TV volume in all other device’s volume only in its own mode.
modes). After that, if desired, you can
perform Individual Volume Unlock on a UNLOCKING ALL VOLUME CONTROL
selected device to set its volume control for (RESTORING DEFAULT SETTING)
independent operation.
NOTE: Performing these instructions will
restore independent volume control for all
LOCKING VOLUME CONTROL TO ONE MODE programmed devices (e.g., TV volume
(GLOBAL VOLUME LOCK) control in TV mode, VCR volume in VCR
1. Press and hold SET until the LED (red mode, etc.).
light) blinks twice, then release SET.
1. On the remote control, press and hold
2. Enter 9 9 3 and then press any mode SET until the LED (red light) blinks
key once (e.g., TV). The LED will blink twice, then release SET.
twice.
2. Enter 9 9 3 and then press VOL + once.
The LED will blink four times.
OWNER’S MANUAL
Troubleshooting 17
OFA 8L with Learning Owners Manual.fm Page 18 Monday, January 24, 2005 10:04 AM
18 FCC Compliance
OFA 8L with Learning Owners Manual.fm Page 19 Monday, January 24, 2005 10:04 AM
OWNER’S MANUAL
There are no express warranties except as Copyright 2005 by Universal Electronics
listed above. ONE FOR ALL SHALL NOT BE Inc. No part of this publication may be
LIABLE FOR INCIDENTAL OR reproduced, transmitted, transcribed,
CONSEQUENTIAL DAMAGES RESULTING stored in any retrieval system, or translated
FROM THE USE OF THIS PRODUCT OR to any language, in any form or by any
ARISING OUT OF ANY BREACH OF means, electronic, mechanical, magnetic,
WARRANTY. ALL EXPRESS AND IMPLIED optical, manual, or otherwise, without the
WARRANTIES, INCLUDING THE prior written permission of Universal
WARRANTIES OF MERCHANTABILITY Electronics Inc.
AND FITNESS FOR A PARTICULAR
URC-8820 01/05
PURPOSE, ARE LIMITED TO THE
WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages, or limitations on how long an
implied warranty lasts, so the above
exclusions or limitations may not apply to
you. This warranty gives you specific legal
rights and you may also have other rights
which vary from state to state.
To obtain warranty service for a defective
product during the warranty period, please
return the product, preferably in the
original carton, along with your purchase
receipt, to the store of original purchase. A
note detailing the complaint would be
helpful. The store, at its option, will replace
or repair this product if found to be
defective.
One For All: (330) 405-8655
ADDITIONAL INFORMATION
As you update your home entertainment
system, One For All® has a universal remote
control that will fit your needs. Please visit
our Website at WWW.Oneforall.com to see
our full product lineup.
ONE FOR ALL® is the registered trademark
of Universal Electronics Inc. Computime
International Ltd. is the Licensee of the ONE
FOR ALL® brand for USA and Canada.
Additional Information 19