Documente Academic
Documente Profesional
Documente Cultură
M/s. Henkel Polybit M/s. Henkel Polyseal PS PG, Material Resubmission Required
1 Joint Sealant Sealant MTS-0132 Not yet - 1
,UAE Polybit ,UAE Polyseal PS GG 1) Floor item to be Requirement raised
ITEM CHANGED
Page No.1/73
Material DELICERY
SI.No Name of Material Unit Material Category Source Suplier/Applicator Products Submission Qty MR STATUS LPO STATUS Priority SCHEDULE / Status
Details REQD DATE
Submersible Pump
58 Capacity: 25 cu.m/hr at 8 m MEP Drainage Not yet - 2
head
Submersible Pump
87 Capacity: 25 cu.m/hr at 8 m MEP Drainage Not yet - 2
head
Transfer from GT
Page No.2/73
Material DELICERY
SI.No Name of Material Unit Material Category Source Suplier/Applicator Products Submission Qty MR STATUS LPO STATUS Priority SCHEDULE / Status
Details REQD DATE
Page No.3/73
Incl
The scope covers the full extend of excavation works including rock,
around and dealing with existing services, earthwork support, leveling,
grading, trimming and compacting bottoms of excavation to receive the
succeeding work as per specification.
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
It's cover the use of waterproof membrane for general protection to buried
concrete in accordance with technical specification. The laying, lapping and
sealing of the membrane shall be in accordance with the manufacturer's
instruction.
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
Page No.4/73
SN Info BoQ for 132/11KV Garden City Substation Qty
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
The scope covers all items related to installation of various metal works
required for substation. The non structural metal work items includes hot
dipped galvanised steel with protective coating against corrosion,
decoration, connectors such as bolts, screws, rivets, tangs, etc. and fixed in
position as per the technical specification., complete.
1.07.03.02. . . .0020 Galvanised steel grating sump pit cover, size 900 x 900 x 40mm thick. -
1.07.03.02. . . .10 Galvanised steel grating channel cover, size 400 x 40mm thick 29.00
The scope covers the full extend of excavation works including rock,
around and dealing with existing services, earthwork support, leveling,
grading, trimming and compacting bottoms of excavation to receive the
succeeding work as per specification.
Page No.5/73
SN Info BoQ for 132/11KV Garden City Substation Qty
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
It's cover the use of waterproof membrane for general protection to buried
concrete in accordance with technical specification. The laying, lapping and
sealing of the membrane shall be in accordance with the manufacturer's
instruction.
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
Page No.6/73
SN Info BoQ for 132/11KV Garden City Substation Qty
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
The scope covers all items related to installation of various metal works
required for substation. The non structural metal work items includes hot
dipped galvanised steel with protective coating against corrosion,
decoration, connectors such as bolts, screws, rivets, tangs, etc. and fixed in
position as per the technical specification., complete.
2.10.03.02.01.01.01.0020 Galvanised steel grating sump pit cover, size 900 x 900 x 40mm thick. 3.00
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
Page No.7/73
SN Info BoQ for 132/11KV Garden City Substation Qty
It's cover the use of waterproof membrane for general protection to buried
concrete in accordance with technical specification. The laying, lapping and
sealing of the membrane shall be in accordance with the manufacturer's
instruction.
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
3.05.01.02. . . .10 10mm thick joint sealant to pre cast concrete cover slabs 155.00
The scope covers all items related to installation of various metal works
required for substation. The non structural metal work items includes hot
dipped galvanised steel with protective coating against corrosion,
decoration, connectors such as bolts, screws, rivets, tangs, etc. and fixed in
position as per the technical specification., complete.
Hot dip galvanised chequered plate sump pit cover size 1000 x 1000mm
3.06.01.01.01.01.01.10 3.00
including MS angles, decoration, fixing in position, complete
The scope covers the full extend of excavation works including rock,
around and dealing with existing services, earthwork support, leveling,
grading, trimming and compacting bottoms of excavation to receive the
succeeding work as per specification.
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. comple
It's cover the use of waterproof membrane for general protection to buried
concrete in accordance with technical specification. The laying, lapping and
sealing of the membrane shall be in accordance with the manufacturer's
instruction.
Page No.8/73
SN Info BoQ for 132/11KV Garden City Substation Qty
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
4.05.01.02. . . .10 10mm thick joint sealant to pre cast concrete cover slabs -
The scope covers all items related to installation of various metal works
required for substation. The non structural metal work items includes hot
dipped galvanised steel with protective coating against corrosion,
decoration, connectors such as bolts, screws, rivets, tangs, etc. and fixed in
position as per the technical specification., complete.
Hot dip galvanised chequered plate sump pit cover size 1000 x 1000mm
4.06.01.01.01.01.01.10 3.00
including MS angles, decoration, fixing in position, complete
The scope covers the full extend of excavation works including rock,
around and dealing with existing services, earthwork support, leveling,
grading, trimming and compacting bottoms of excavation to receive the
succeeding work as per specification.
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
It's cover the use of waterproof membrane for general protection to buried
concrete in accordance with technical specification. The laying, lapping and
sealing of the membrane shall be in accordance with the manufacturer's
instruction.
Page No.9/73
SN Info BoQ for 132/11KV Garden City Substation Qty
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
5.05.01.02. . . .10 10mm thick joint sealant to pre cast concrete cover slabs 42.20
The scope covers all items related to installation of various metal works
required for substation. The non structural metal work items includes hot
dipped galvanised steel with protective coating against corrosion,
decoration, connectors such as bolts, screws, rivets, tangs, etc. and fixed in
position as per the technical specification., complete.
Hot dip galvanised chequered plate sump pit cover size 1000 x 1000mm
5.06.01.01.01.01.01.10 1.00
including MS angles, decoration, fixing in position, complete
Demobilisation
As soon as the work is completed and before the issuance of TOC, the
contractor with prior approval of the Siemens and Owner / Enginner shall
remove and clear away of all temporary installation and facilities erected -
6.01.03.01. . . .10 1.00
this also cover the temporary offices and facilities for Siemens and Owner /
Engineer.
The area occupied or affected to be clean and clear of all debris and
pollution.
The scope covers the full extent of excavation works including rock, around
and dealing with existing services, earthwork support, levelling, grading,
trimming and compacting bottoms of excavation to receive the succeeding
work as per specification.
The scope covers the full extend of the interlocking paved road works
required as per technical specification, including, ground preparation,
embankment filling, placing, compaction, preparation, testing, etc. complete
Page No.10/73
SN Info BoQ for 132/11KV Garden City Substation Qty
The scope covers the full extend of the asphalt road works required as per
technical specification, including, ground preparation, embankment filling,
placing by layers, compaction, preparation, testing, etc. complete
The scope covers the full extend of the construction of cable ducts including
earth work, concrete, concrete protection, UPVC pipes, etc. as per the
specification complete.
R.C.C manhole 2000 x 2000mm internal size, depth 2000mm, 250mm thick
6.06.01.02. . . .0020 base and walls,250mm thick precast cover slabs including excavation, -
backfilling, removal of surplus excavated materials, etc, complete.
R.C.C manhole 2200 x 4800mm internal size, depth 2000mm, 250mm thick
6.06.01.02. . . .0030 base and walls, 250mm thick precast cover slabs including excavation, -
backfilling, removal of surplus excavated materials, etc, complete.
R.C.C manhole 1800 x 3200mm internal size, depth 2000mm, 250mm thick
6.06.01.02. . . .0040 base and walls, 250mm thick precast cover slabs including excavation, -
backfilling, removal of surplus excavated materials, etc, complete.
R.C.C manhole 1500 x 1500mm internal size, depth 2000mm, 250mm thick
6.06.01.02. . . .10 base and walls, 250mm thick precast cover slabs including excavation, -
backfilling, removal of surplus excavated materials, etc, complete.
The scope covers the full extend of the construction of oil water collection
tank including earth work, concrete, concrete protection, UPVC pipes, etc.
as per the specification complete.
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. comp
The scope cover the use of waterproof membrane for general protection to
buried concrete in accordance with technical specification. The laying,
lapping and sealing of the membrane shall be in accordance with the
manufacturer's instruction.
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complet
Page No.11/73
SN Info BoQ for 132/11KV Garden City Substation Qty
The scope covers the full extend of the construction of fire pipe trench
including earth work, concrete, concrete protection, etc. as per the
specification complete.
The scope covers the full extend of the construction of oil pipe connections
and manholes, etc. as per the specification complete.
R.C.C manhole 1500 x 1500 mm internal size, depth not exceeding 4000
mm, 300 mm thick base and walls,250 mm thick cover slab with 600 x 600
mm clear opening Medium Duty D.I cover and frame including excavation,
6.09.03.02. . . .10 8.00
backfilling, removal of surplus excavated materials, galvanised step irons
fixed to walls, forming concrete benching, concrete protection, etc,
complete.
Allow for water valve pit size internal dimension of 600 x 600 x 500mm
Concrete structure valve pit complete with excavation, blinding, concrete
6.09.04.03.01. . .0080 1.00
protection, surface finishing, 600 x 600 medium duty DI cover, pipe support
200 x 200 x 100 and 150 x 150mm soak pit
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. comple
Page No.12/73
SN Info BoQ for 132/11KV Garden City Substation Qty
800 x 800mm, heavy duty, GRP Seal and double trangle DI manhole cover,
6.09.04.03.03. . .0180 1.00
complete
The scope covers the full extend of excavation works including rock,
around and dealing with existing services, earthwork support, leveling,
grading, trimming and compacting bottoms of excavation to receive the
succeeding work as per specification.
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Concrete grade for structural concrete = C40 (minimum 40 N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking / stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460 N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
It's cover the use of waterproof membrane for general protection to buried
concrete in accordance with technical specification. The laying, lapping and
sealing of the membrane shall be in accordance with the manufacturer's
instruction.
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complet
Dessing roof covering layers around rainwater outlets including rain water
7.02.04. . . . .0080 2.00
outlet
7.02.04. Roof Covering
The scope covers all items related to installation of various metal works
required for substation. The non structural metal work items includes hot
dipped galvanised steel with protective coating against corrosion,
decoration, connectors such as bolts, screws, rivets, tangs, etc. and fixed in
position as per the technical specification., complete.
7.02.05.03. . . .0020 40mm thick grating cover for 800 x 800mm sump pit 1.00
7.02.05.03. . . .10 Chequered plate - cable pit cover - 1200 x 800 x 8mm thick 1.00
Page No.13/73
SN Info BoQ for 132/11KV Garden City Substation Qty
The scope covers the full extend of excavation works including rock,
around and dealing with existing services, earthwork support, leveling,
grading, trimming and compacting bottoms of excavation to receive the
succeeding work as per specification.
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Concrete grade for structural concrete = C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complete
It's cover the use of waterproof membrane for general protection to buried
concrete in accordance with technical specification. The laying, lapping and
sealing of the membrane shall be in accordance with the manufacturer's
instruction.
The scope covers the full extend of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using ordinary portland cement, concrete grade for structural concrete =
C40 (minimum 40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strengh of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. complet
Dessing roof covering layers around rainwater outlets including rain water
8.02.03. . . . .0080 2.00
outlet
8.02.03. Roof Covering
9.02. Roof Mounted Equipment Covering
9.02.01. Roof Mounted Equipment Covering
9.02.01.01. Roof Mounted Equipment Covering
9.02.01.01.01. Roof Mounted Equipment Covering
9.02.01.01.01.01. Roof Mounted Equipment Covering
9.02.01.01.01.01.00. Roof Mounted Equipment Covering
9.02.01.01.01.01.00. Roof Mounted Equipment Covering
9.02.01.01.01.01. Roof Mounted Equipment Covering
9.02.01.01.01. Roof Mounted Equipment Covering
9.02.01.01. Roof Mounted Equipment Covering
9.02.01. Roof Mounted Equipment Covering
9.02. Roof Mounted Equipment Covering
9.05.01. Roof waterproofing and covering
9.05.01.01. Roof waterproofing and covering
Page No.14/73
SN Info BoQ for 132/11KV Garden City Substation Qty
The scope covers the full extent of the concrete works required as per
technical specification, including, design, supply, any additives, placing,
compaction, preparation, curing, testing, etc. complete
Using sulphate resistant cement, concrete grade for blinding concrete =
C20 (min 20N/mm2)
Fair faced concrete grade for structural concrete = C40 (minimum
40N/mm2)
Formworks class in accordance with technical specification, including any
props, surface preparation unless otherwise stated, embedment,
preparation, striking/stripping, cleaning, chamfer, rebate, groove, throats,
ends opening, etc. complete
Reinforcing steel bars shall be high yield deformed bars a minimum
characteristic yield strength of 460N/mm2 as per BS, or equal including,
supply, fabrication, installation, etc. comple
The scope cover the use of waterproof membrane for general protection to
buried concrete in accordance with technical specification. The laying,
lapping and sealing of the membrane shall be in accordance with the
manufacturer's instruction.
10.01.01.05. . . .0060 800 x 800mm, heavy duty, cast iron manhole cover, complete 2.00
The scope covers the full extend of the construction of oil pipe connections
and manholes, etc. as per the specification complete.
R.C.C manhole 1200 x 1200 mm internal size, depth not exceeding 4000
mm, 250 mm thick base and walls,250 mm thick cover slab with 600 x 600
mm clear opening Medium Duty D.I cover and frame including excavation,
10.01.01.06. . . .0020 1.00
backfilling, removal of surplus excavated materials, galvanised step irons
fixed to walls, forming concrete benching, concrete protection, etc,
complete.
Page No.15/73
Including Boundary Wall
Page No.16/73
Unit Unit Rate Total (AED)
No 200.00 800.00
m 509.35 14,771.15
m3 40.00 1,000.00
Page No.17/73
Unit Unit Rate Total (AED)
Page No.18/73
Unit Unit Rate Total (AED)
No 200.00 2,000.00
No 1,833.66 5,500.98
m2 2,000.00 16,200.00
m 509.35 34,126.45
m3 65.00 669.50
Page No.19/73
Unit Unit Rate Total (AED)
m 8.40 1,302.00
No 1,476.38 4,429.14
m3 65.00 780.00
Page No.20/73
Unit Unit Rate Total (AED)
No 1,181.10 3,543.30
m3 65.00 195.00
Page No.21/73
Unit Unit Rate Total (AED)
m 8.40 354.48
No 1,476.38 1,476.38
Included in Item
Included in Item
item
6.01.01.01. . . . 6.01.01.01. . . .0020
0020
Included in Item
Included in Item
item
6.01.01.01. . . . 6.01.01.01. . . .0020
0020
Page No.22/73
Unit Unit Rate Total (AED)
Page No.23/73
Unit Unit Rate Total (AED)
No 14,520.00 116,160.00
No 295.28 885.84
No 3,250.00 9,750.00
No 6,750.00 20,250.00
No 16,978.35 16,978.35
No 2,560.00 2,560.00
Page No.24/73
Unit Unit Rate Total (AED)
m3 40.00 11,131.81
No 200.00 400.00
No 600.00 600.00
No 836.61 836.61
Page No.25/73
Unit Unit Rate Total (AED)
m3 40.00 6,160.00
No 200.00 400.00
Page No.26/73
Unit Unit Rate Total (AED)
No 2,460.63 4,921.26
No 10,866.14 10,866.14
Page No.27/73
Sl.No Work Group Location BOQ ref BOQ Qty BOQ price
1.06.01.02. . . .10
8.02.02.02. . . .10
3 Block Work All 2.08.01.02.01.01.01.10 367.00 148
1.08.01.01. . . .10
4 Plasterwork All 2.11.01.01.01.01.01.10 5,217.46 44
5 Floor First Floor 2.12.01.01.01.01.01.00 810.00 34.45
BOQ Amount Actual Qty Item Wastage Material Make & Spec
3140 #DIV/0!
Sq.m 484.16695 121 108 97 108 Garden Tower
Garden Tower
Sl.No Location Grid Material Size Units
213.8456
+
207.8209
202.4064
Main building
Area (sq.m) LC SCR (tonne
2sqm fo
Consumption Rate
or 25-3
Total 3140 36
% wastage considered 5%
Basement 740 27.972
Ground Floor 1200 45.36
First Floor 1200 45.36
Units No
L B
Sq.m 1 3.86
Sq.m 1 4.52
Sq.m 1 6.62
Sq.m 1 5.23
Sq.m 1 3.32
Sq.m 1 5.47
Sq.m 1 5.095
Sq.m 1 4.315
Sq.m 1 6.12
Sq.m 1 13.42
Sq.m 1 2.36
Sq.m 1 3.58
Sq.m 1 2.74
Sq.m 1 5.93
Sq.m 1 5.225
Sq.m 1 3.31
Sq.m 1 5.47
Sq.m 1 5.17
Sq.m 1 4.25
Sq.m 1 2.83
Sq.m 1 4.9
Sq.m 1 4.58
Sq.m 1 3.85
Sq.m 1 7.7
Sq.m 1 0.53
Sq.m 1 0.53
Sq.m 1 5.18
Sq.m 1 0.53
Sq.m 1 6.82
Sq.m 1 0.53
Sq.m 1 4.7
Sq.m 1 2.68
Sq.m 1 5.785
Sq.m 1 5.235
Sq.m 1 3.32
Sq.m 1 5.51
Sq.m 1 5.13
Sq.m 1 4.2
Sq.m 1 2.97
Sq.m 1 6.785
Sq.m 1 3.01
Sq.m 1 4.93
Sq.m 1 4
Sq.m 1 2.32
Sq.m 1 90.825
Sq.m 1 8.57
Sq.m 1 4.52
Sq.m 1 3.45
Sq.m 1 5.99
Sq.m 1 5.28
Sq.m 1 6.64
Sq.m 1 5.13
Sq.m 1 3.32
Sq.m 1 5.47
Sq.m 1 5.07
Sq.m 1 4.27
Sq.m 1 3.39
Sq.m 1 3.36
Sq.m 1 4.7
Sq.m 1 5.93
Sq.m 1 5.2
Sq.m 1 3.31
Sq.m 1 5.47
Sq.m 1 5.17
Sq.m 1 4.32
Sq.m 1 2.83
Sq.m 1 1.86
Sq.m 1 1.34
Sq.m 1 104.59
Sq.m 1 4.083
Sq.m 1 4.97
Sq.m 1 5.37
Sq.m 1 3.22
Sq.m 1 2.38
sq.m 1 4.52
sq.m 1 3.85
sq.m 1 7.7
sq.m 1 5.18
sq.m 1 6.82
sq.m 1 7.45
sq.m 1 4.7
sq.m 1 2.68
sq.m 1 5.785
sq.m 1 5.235
sq.m 1 3.32
sq.m 1 5.51
sq.m 1 5.13
sq.m 1 4.2
sq.m 1 2.97
sq.m 1 6.165
sq.m 1 6.03
sq.m 1 4.93
sq.m 1 4
sq.m 1 2.32
sq.m 1 0
Sq.m 1 98.495
Sq.m 1 160.34
Sq.m 1 2.83
Sq.m 1 4.34
Sq.m 1 5.17
Sq.m 1 6.745
Sq.m 1 5.47
Sq.m 1 3.31
Sq.m 1 5.2
Sq.m 1 5.93
Sq.m 1 2.88
Sq.m 1 26.54
Sq.m 1 4.145
Sq.m 1 4.29
Sq.m 1 4.545
Sq.m 1 5.07
Sq.m 1 4.145
Sq.m 1 5.47
Sq.m 1 3.32
Sq.m 1 5.13
Sq.m 1 4.145
Sq.m 1 6.62
Sq.m 1 5.23
Sq.m 1 2.04
Sq.m 1 22.075
Sq.m 1 1
Sq.m 1 7.35
Sq.m 1 7.35
sq.m 1 1.99
sq.m 1 0.4
sq.m 1 0.98
sq.m 1 2.57
sq.m 1 2.57
sq.m 1 2.57
sq.m 1 2.57
sq.m 1 2.57
sq.m 1 2.57
sq.m 1 2.363
sq.m 1 2.363
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.363
sq.m 1 2.363
sq.m 1 2.726
sq.m 1 2.726
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.726
sq.m 1 2.726
sq.m 1 1.708
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 1.708
sq.m 1 2.726
sq.m 1 2.726
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.7
sq.m 1 2.726
sq.m 1 2.726
Sq.m 1 15.842
Sq.m 1 30.986
Sq.m 1 3.176
Sq.m 1 31.2
sq.m 1 150
8.24
2)
50 kg 5% 13361 281 -
200 L 5180 26
70
25900
H/TK
2.93 11.31
2.93 13.24
2.93 19.40
2.93 15.32
2.93 9.73
2.93 16.03
2.93 14.93
2.93 12.64
2.93 17.93
2.93 39.32
2.93 6.91
2.93 10.49
2.93 8.03
3.14 18.62
3.14 16.41
3.14 10.39
3.14 17.18
3.14 16.23
3.14 13.35
3.14 8.89
3.14 15.39
5.77 26.43
5.77 22.21
5.77 44.43
5.77 3.06
5.77 3.06
5.77 29.89
5.77 3.06
5.77 39.35
5.77 3.06
5.77 27.12
5.77 15.46
5.77 33.38
5.77 30.21
5.77 19.16
5.77 31.79
5.77 29.60
5.77 24.23
5.77 17.14
5.77 39.15
5.77 17.37
5.77 28.45
5.77 23.08
5.77 13.39
0.21 19.07
5.17 44.31
5.17 23.37
5.17 17.84
5.17 30.97
5.17 27.30
5.17 34.33
5.17 26.52
5.17 17.16
5.17 28.28
5.17 26.21
5.17 22.08
5.17 17.53
5.17 17.37
5.17 24.30
5.17 30.66
5.17 26.88
5.17 17.11
5.17 28.28
5.17 26.73
5.17 22.33
5.17 14.63
2.27 4.22
2.27 3.04
0.21 21.96
531.4503
10.68 43.61
10.68 53.08
10.68 57.35
10.68 34.39
10.68 25.42
213.8456
5.19 23.46
5.19 19.98
5.19 39.96
5.19 26.88
5.19 35.40
5.19 38.67
5.19 24.39
5.19 13.91
5.19 30.02
5.19 27.17
5.19 17.23
5.19 28.60
5.19 26.62
5.19 21.80
5.19 15.41
5.19 32.00
5.19 31.30
5.19 25.59
5.19 20.76
5.19 12.04
5.19 0.00
0.21 20.68
0.21 33.67
5.19 14.69
5.19 22.52
5.19 26.83
5.19 35.01
5.19 28.39
5.19 17.18
5.19 26.99
5.19 30.78
5.19 14.95
5.19 137.74
5.19 21.51
5.19 22.27
5.19 23.59
5.19 26.31
5.19 21.51
5.19 28.39
5.19 17.23
5.19 26.62
5.19 21.51
5.19 34.36
5.19 27.14
5.19 10.59
5.19 114.57
5.19 5.19
5.19 38.15
5.19 38.15
1397.709
2.65 5.27
2.65 1.06
2.65 2.60
2.65 6.81
2.65 6.81
2.65 6.81
2.65 6.81
2.65 6.81
2.65 6.81
2.65 6.26
2.65 6.26
2.65 7.16
2.65 7.16
2.65 7.16
2.65 6.26
2.65 6.26
2.65 7.22
2.65 7.22
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.22
2.65 7.22
2.65 4.53
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 4.53
2.65 7.22
2.65 7.22
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.16
2.65 7.22
2.65 7.22
2.65 41.98
2.65 82.11
2.65 8.42
3.09 96.41
2.1 315.00
For 2 sq.m For 1 sqm
For 20 mm thick 72 36
For 22.5 mm Thick 81 40.5 3.6 9
For 25 mm Thick 90 45
30mm thick 108 54
LC-BRC 20sq.m for 2mm thickness per 50kg bag
0.625sqm/bag at
20kg 32
40mm thickness
For 50mm 40
1.420+2.210
311.73 6.234628 6234.628
311.73
+
155.8657 207.8209333333
202.4064
SL.No Materials Type of Work Basement
1 Angle bead - GI/SS
2 Baker Rod
3 Bitumin Paint
4 Block Mesh - GI
5 Block Mesh - GI/SS
6 Block work Accessories
7 Blocks
8 Blockwork
9 BRC Mesh
10 Cement
11 Cement Mortor
12 Corner Bead -GI
13 Corner Bead -GI/SS
14 Drainage Pipes
15 Dry wall -(duct area)
16 Edge angle
17 Epoxy paint
18 Epoxy Screed+Paint
19 Floor Sealant
Floor Tile
Floor Tile Grout
20 Geo-textiles
21 GRC Lining
22 GRC pipes
23 Paint - Ceiling
24 Paint- Walls
25 Paint - Walls (Epoxy Based)
26 Plaster accessories
27 Plaster Mesh - GI
28 Plaster Mesh - GI/SS
29 Plastering
30 Raised Floor
31 Render
32 Roof Tiles
33 Rush coat
34 Sand
35 Sealent - Horzantal Mtrs 550
36 Sealent - Vertical Mtrs 690
37 Basker Rod mtrs 690
38 Steel/Aluminium Doors
39 Steel/Aluminium Windows
40 Stopper Bead -GI
41 Stopper Bead -GI/SS
42 Upvc pipe Ducts
43 Upvc pipe Sleeves
44 Wall sealant
45 Wall Ties - GI
46 Wall Ties - GI/SS
47 Waterproofing
48 Waterproofing System
Ground Floor First Floor Roof FPR Secutiy Room Total
550
1820 2550 90 100 5250
1400 850 90 100 3130
SN Info BoQ for 132/11KV Garden City Substation Qty Unit
Epoxy paint.
Prepare and apply epoxy paint with base as per the
2.13.01.01.01.01.01. 577.00 m2
technical specification to fair faced concrete surfaces and
plastered walls.
Epoxy paint
2.13.02.01.01.01.01. Prepare and apply epoxy paint over equipment plinths and 13.00 m2
over upstands as per the specification.
Removable galvanized and epoxy coated fencing mesh to
3.04.01.01.01.01.01.1 215.11 m2
main transformer pan
Prepare and apply minimum 6mm thick epoxy screed with
3.08.01.01. . . .002 254.41 m2
paint to floor screed- plinth Area
Oil / chemical resistance paint.
Prepare and apply three coats of oil/chemical resistant
3.08.01.01. . . .10 epoxy paint to fairfaced concrete floor and walls below 344.89 m2
transformer plinth level as per the specification and
manufactures recommendations.
54.00 18,036.00
54.00 21,546.00
28.00 8,428.00
54.00 2,646.00
54.00 10,854.00
Ea 22,176.00
224.00 250,880.00
54.00 76,032.00
35.00 22,260.00
28.00 15,792.00
54.00 378.00
224.00 36,288.00
54.00 31,158.00
48.00 6,720.00
48.00 142,080.00
54.00 702.00
620.00 133,368.20
224.00 56,987.84
42.00 14,485.38
54.00 148,783.50
620.00 24,800.00
54.00 4,212.00
224.00 19,264.00
42.00 31,668.00
54.00 10,044.00
620.00 37,200.00
224.00 8,512.00
42.00 2,562.00
42.00 4,396.56
54.00 52,653.24
10.00 290.00
54.00 108.00
54.00 7,992.00
54.00 1,080.00
10.00 470.00
10.00 2,655.93
54.00 2,182.48
224.00 16,554.53
32.00 1,219.42
54.00 32,425.45
137.80 636.50
54.00 702.00
1 poly coat
Total
No of coats 2
Consumption per coa 4 Sqm/lit
Total incl Wastage 5%
qty Remarks
16
173
94.5
87
55.35
35
33.75
71
56.565
121
211.365
954.53
477.265
501.1