Documente Academic
Documente Profesional
Documente Cultură
YAMAHA R15
CONTENT Page
6. Basic Tuning 10
7. Warning 10
1.4 Warrantee
ECM Advance Standalone Yamaha R15 Manual
4
2.1 Specification
Battery : 12-16 Volt
Current consumption : 0.5 ampere
Microprocessor : 32 bit STMCU
Injection resolution : 0.01 mS
Ignition resolution : 0.01 °
Environment Temp. : < 60 °C
Suitable for YAMAHA R15
Water proved
GROUND
RESERVE RESERVE
+5 DUAL MODE
1. ECM Connector V
2. LED Status
- Green Status mode 1
- Red Status mode 2
- LED Blink Interfacing Software
3. Service Port
4. Reserve
5. Data Link Port
ECM Advance Standalone Yamaha R15 Manual
6
1 1 11 11
12 22
23 23 33
Top
3. ECM Installation
4. Data Link driver program and STANDALONE TUNER Tuning program installation
Minimum personal computer Specification as working platform
CPU: Intel Core 2 Duo
RAM: 1 GB [HDD: 500 MB]
OS: Windows XP, Windows 7, Windows 8
3. “FIDI CDM Driver Installation process completed.” Show on the monitor if success.
4
3
5 4
4 2
6. Basic Tuning
6.1 Download file data in www.apitechonline.com
7. Warning
1. Please read this manual carefully
2. Please do not open the inside or modified ECM by your self
3. Please turn of the Ignition key before install the ECM
4. Please place the ECM at the save location
5. Please be sure your battery: 12-15 volt
6. Please noticed the lock in position of the data link cable. When connect to ECM the lock in position of data link
cable must be at the lock in position of ECM. If not data link cable can be damaged.
7. Please close the program tuning before disconnect and pull out the data link cable form USB port of the computer.