Documente Academic
Documente Profesional
Documente Cultură
DRILL CUTTINGS: Drill cuttings, circulated back to the surface with the drilling mud, are
collected periodically from the shale shaker. By analying the cuttings under a microscope
and then estimating the depth at which they were cut, the geologist is able to maintain a
log of the lithologic column, noting as appropriate, the presence of hydrocarbons.
MUD LOGGING : Mud logging is an optional evaluation service performed at the rig site
using a mobile field laboratory, This service is normally requested for exploratory welles,
offshore locationes, and sites where dangerous drilling conditions may exist.
Mud logging units provide a variety of service, but the two basic ones are: (1) detecting
hydrocarbons in drilling mud and cutting, and (2) monitoring the properties of drilling mud
and cuttings. The first allows us to spot hydrocarbon- bearing zones, even when the
presence of hydrocarbons is small; and the second enables us to monitor blowout
prevention capability and transtion into abnormally pressured zones.
CONVENTIONAL CORING:
pag. 5
(sin un cambio en el bit, rotanting velocidad, o el peso en el bit) es una fuerte evidencia de
que una nueva formación ha sido penetrada.
RECORTES DE PERFORACIÓN: Los cortes de taladrado, que circulan de nuevo a la
superficie con el lodo de perforación, se recogen periódicamente del sacudidor de pizarra.
Al analizar los cortes bajo un microscopio y luego estimar la profundidad a la que fueron
cortados, el geólogo es capaz de mantener un registro de la columna litológica,
observando como sea apropiado, la presencia de hidrocarburos.
Las unidades de registro de barro proporcionan una variedad de servicios, pero los dos
básicos son: (1) detectar hidrocarburos en el barro de perforación y el corte, y (2)
monitorear las propiedades del lodo de perforación y las estacas. La primera nos permite
localizar zonas portadoras de hidrocarburos, incluso cuando la presencia de hidrocarburos
es pequeña; y el segundo nos permite monitorear la capacidad de prevención de
explosión y la transición en zonas anormalmente presionadas.
CORDÓN CONVENCIONAL:
pag. 5
and other information of interest to the reservoir engineer, If it is advisable, the core may
be cut and retained under its original pressure until it is analyzed in the laboratory
(pressure coring)
A number of downhole measurements made at the bit are transmitted to the surface using
mud pulse telemetry, which is a wireless means of communicating data. These include
directional surveying data, formacion radioactivity borehole pressure, borehole
temperature, differential mud resistivity, weight on bit, and torque on bit, Some of these
measurements provide direct information on formation properties.
1.3
Postdrilling Methods
The following reservoir evaluation methods may be undertaken after the well has been
drilled into or through the potentially productive formation:
sidewall coring
formation testing
drillstem testing
Electric wireline logging: There are a number of open and cased hole
logging tools that may be run on an electric wireline to obtain formation data such as
lithology, thickness, porosity, hydrocarbon saturation , net pay thickness, depth, hole size,
etc.
SIDEWALL CORING: Sidewall coring is a method of retreeving small core
pag 6
y otra información de interés para el ingeniero del yacimiento. Si es aconsejable, el núcleo
puede ser cortado y retenido bajo su presión original hasta que sea analizado en el
laboratorio (corte a presión)
(MWD): Los desarrollos recientes en MWD (Grosso et al. 1983) utilizando técnicas
avanzadas de sensor de pozo y telemetría, permiten la adquisición en tiempo real de
datos de pozo durante la perforación.
1.3
Métodos de Postdrilling
Los siguientes métodos de evaluación del yacimiento pueden ser emprendidos después
de perforar el pozo en oa través de la formación potencialmente productiva:
pruebas de formación
pruebas de perforaciones
herramientas de registro que se pueden ejecutar en una línea eléctrica para obtener datos
de formación tales como litología, espesor, porosidad, saturación de hidrocarburos,
espesor neto de pago, profundidad, tamaño del agujero, etc.
CURVADO DE LA LATERAL: El corte de la pared lateral es un método para volver a
pag 6