Documente Academic
Documente Profesional
Documente Cultură
DEPARTMENT OF MECHATRONICS
ENGINEERING
ENGINEERING
MTE-322
DESIGN MECH ELEMENTS & CAD/CAM
ASSIGNMENT REPORT # 1
(weight simulation solidworks)
ROLL NO: 1
NAME: AHMED KAMRAN
REG NO: 16PWMCT0464
SEMESTER: 6TH
SECTION: A
SUBMITTED TO DR. MUHAMMAD AKMAL
(Assistant Professor, Department of Mechatronics Engineering, UET
Peshawar)
INTRODUCTION:
Simulation modeling solves real-world problems safely and efficiently. It provides an important
method of analysis which is easily verified, communicated, and understood. Across industries
and disciplines, simulation modeling provides valuable solutions by giving clear insights into
complex systems.
Simulation enables experimentation on a valid digital representation of a system. Unlike physical
modeling, such as making a scale copy of a building, simulation modeling is computer based and
uses algorithms and equations. Simulation software provides a dynamic environment for the
analysis of computer models while they are running, including the possibility to view them in 2D
or 3D.
The uses of simulation in business are varied and it is often utilized when conducting
experiments on a real system is impossible or impractical, often because of cost or time.
The ability to analyze the model as it runs sets simulation modeling apart from other methods,
such as those using Excel or linear programming. By being able to inspect processes and interact
with a simulation model in action, both understanding and trust are quickly built.
OBJECTIVES:
To make a very light structure which can withstand 200kg of mass on a point and its own
weight
STRUCTURE TO BE SIMULATED:
SIMULATION # 1
In this simulation structure is considered to be a solid structure.
6. Now the
results of
simulation Fig no.4
are shown in Fig no.5 .
Fig no.5
B. For slider
based:
Fig no.6 Fig no.7
steel withFig no.8
1. Here material is also carbon same mass and
volume but base is not fixed this time.
2. Same applications of gravity and weight.
3. And results are shown in Fig no.9 , 10 and 11.
SIMULATION # 2
In this simulation structure has gauge of 6mm