Documente Academic
Documente Profesional
Documente Cultură
1
Pulling force Date Time Pulling speed
Pulling
force Limit
Pulling
force , Length indication
Metre counter
2 Operation
After switching on the data logger the main menu screen appears as shown above.
Before starting to record while pulling in the rope, the data logger needs to be programmed.
Print out:
Choose the protocol from the file list which
needs to be printed out. Then tap on the
folder symbol in order to open the selected
file.
, - 3 4 1.
2.
Length
Pulling force
3. Pulling speed
4. Time
2 . '+
Contrast adjustments
Additional settings:
Language selection
Date/time (Password)
System settings (Password)
Attention !
When finishing work, switch off the data logger!
All pulling job protocol files can be stored on a PC for further processing or archiving. Every
PC with a USB port can be used for this purpose. The protocol files on the USB drive are
saved as CSV files, which can be copied onto a PC where they can be stored or deleted.
These CSV files contain all measurement data which can be imported to spreadsheets for
further processing.
1. Open the hatch of the printer by pulling the lever on the hatch carefully up. The hatch
can now be opened easily.
2. Unreel approximately 10 cm off the paper roll and make sure that the remainder stays
tightly together. Now place the paper roll in the opening of the printer, making sure
that the printable side of the paper is on the outside.
Printable side
9: ;<=>? @A? AB@CA =D @A? EFGH@?F CBF?DI<<J KG@A >=L? D=FC? IH@G< J=I A?BF B C<GCMGHN >=IHO
and the hatch is firmly closed. The paper can now be torn off without opening the
hatch.
Attention !
Make sure to keep the printer in dry conditions and avoid contact with water or
exposure to high humidity. Only replace the printer paper in a dry environment.