Documente Academic
Documente Profesional
Documente Cultură
10 Trunnion Support
To create a Trunnion Support, click on the Trunnion button within the Create group located on the
SUPPORTS tab.
After the user select one of the standard templates, a message on the top centre of the screen will prompt
the user to Identify tube of datum pipe or support.
After selecting the pipe to be supported, the trunnion will be created and the Support Editor form will be
displayed.
Copyright © 2015. 69
AVEVA Solutions Limited and its subsidiaries. www.aveva.com
All rights reserved.
AVEVA Everything3D™ (2.1)
Supports TM-1818
Select Trunnion from the Create group located on the SUPPORTS tab as shown before, select XTT04 from
the displayed gallery.
Indicate the pipe by the graphical selection. The trunnion is created on the previous piping component of the
position selected in the model and the Support Editor form is displayed.
It can be seen that most of the buttons have been greyed out
as they are not appropriate for use on a Trunnion support.
The support can be renamed by entering the new support name in the Name text box, or the user may use
the Auto Naming functionality as previously explained.
On the top of the form, there is a drop down menu containing all available
trunnion bores. If the user selects a different bore the trunnion will be rebuilt
with the new bore.
Members of the support are displayed in some tabs on the top of the form.
XRT01 is the tab for the TRANCI, the ancillary which connects the trunnion
to the pipe, for TT04 this is just a pipe rest which signifies that the trunnion is
welded to the pipe.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
www.aveva.com
All rights reserved.
70
AVEVA Everything3D™ (2.1)
Supports TM-1818
XAC18A is the tab for the base plate. In this case there is
only one member of a base plate. The dimensions of the
plate can be changed through the dimension control
section on this tab. There could be more than one plate on
a trunnion.
It can be seen in the image from the previous step that the trunnion height needs to be extended to be
positioned on top of the slab.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
71
www.aveva.com
All rights reserved.
AVEVA Everything3D™ (2.1)
Supports TM-1818
Typically:
If the user does not want to identify a design element as listed before the
Escape key can be pressed and the length value can be entered in the
dimension control area of the Support Editor form.
The Select Trunnion Material will display all available specifications material for tube. The parent pipe
material is indicated on the selection form as the default material.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
www.aveva.com
All rights reserved.
72
AVEVA Everything3D™ (2.1)
Supports TM-1818
Select a Material and Click the OK button on the Select Trunnion Material form. The selected material will
be used for the trunnion.
The Ancillary Selection form with all available Head Components will be displayed.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
73
www.aveva.com
All rights reserved.
AVEVA Everything3D™ (2.1)
Supports TM-1818
Select XAT029B – Reinforcing Pad for elbow for C.S. pipe and click the OK button.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
www.aveva.com
All rights reserved.
74
AVEVA Everything3D™ (2.1)
Supports TM-1818
Create Base Component Allows you to associate an additional ancillary with the base of the trunnion. For
example Guides, Stops and Slip Units.
The Ancillary Selection form with all available associated ancillaries will be displayed.
The List by Type drop down menu can help to filter the list and bring up the guide types.
Select XGT11 – Guide for Base Support NPS 2-36 and click the OK button.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
75
www.aveva.com
All rights reserved.
AVEVA Everything3D™ (2.1)
Supports TM-1818
It can be seen that a tab for the guide has been added to the
top of the dimension control section of the Support Editor
form.
A prompt message asks to ‘Identify ancillary to rotate’. Select the guide from the 3D view
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
www.aveva.com
All rights reserved.
76
AVEVA Everything3D™ (2.1)
Supports TM-1818
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
77
www.aveva.com
All rights reserved.
AVEVA Everything3D™ (2.1)
Supports TM-1818
Select the Distance button on the Support Editor form as shown and enter a distance of 2000mm and press
<Enter>.
The user may use other available options for positioning the support for example Position Through.
The Support Health Check Utility will be run automatically after clicking on the Apply button in the Support
Editor form.
The Trunnion support may be modified in the same way as other support types described before.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
www.aveva.com
All rights reserved.
78
AVEVA Everything3D™ (2.1)
Supports TM-1818
Exercise 9 – Trunnions
1. Using the above example create trunnions under an elbow and pipe.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
79
www.aveva.com
All rights reserved.