Documente Academic
Documente Profesional
Documente Cultură
1. Plug in your Dongle then run wathcit then type DONGLEDRIVER to ensure the machine can it.
2. Run HASPHL2007.exe
1
3. Go to Driver tab -> Install Driver
2
5. Go to Dumper Tab, press Refresh button until you see something in HASP/HL Dongles box.
3
7. Once it finished, it will generate bin file.
8. You will find hl630A.bin file in same folder with your HASPHL2007.exe
4
9. Move the bin file to EDGE folder then run edgehasp.exe
5
11. Browse the bin file that you generated before.
12. Browse directory where you want to put it and give it name then press Save button. I prefer put it in same folder
as edge directory.
6
13. Press Solve button and wait until it show message as below. This process should be done in seconds.
7
How to load DNG file using HASP.
8
3. Go back to Emulator tab, you should see a lot of alphanumeric character in License box.
5. If you want to make the license autorun every time you start the machine. Go to Driver tab then select
automatic start and save state.
END OF PAGE