Documente Academic
Documente Profesional
Documente Cultură
Hi ,
We are trying to print label using SAP Smartform by using Zebra Device Type YZB200. Here it seems ZPL commands
do not work as driver is not ZPL 2.
Is there any command where I can rotate the entire Label by 90 degrees. I have seen PO command but i guess it
rotates by 180 degree.
Correct Answer
by Prajval Shetty on Jun 23, 2017 7:58 AM
Hi Clint,
Ya I am aware that FWR command can be used but I guess its for LZEB2 device type. Here the subject in the
question is different device type. So I had a confusion.
Neverthless I was able to rotate the label using smartform by designing as per YZB200 device type.
In order to use commands you have to define in Print Controls and use it in command node of smartform.
(0 ratings)
Hi Prajval,
There are no ZPL commands to rotate the entire label 90 degrees. You are right that the ^PO rotates by 180. I'm
checking with our Smartforms expert to see if there as something that can be done there.
https://developer.zebra.com/thread/34409 1/5
3/26/2019 Rotating Entire Label by 90 Degree for YZB200 S... | Zebra Technologies Developer Portal
Clint Hightower Jun 23, 2017 6:38 AM (in response to Robin West)
Re: Rotating Entire Label by 90 Degree for YZB200 SAP Smartforms
I have a GX420d and I need to rotate 90 degrees using the FWR command, but I don't know where to enter the
command. Please help.
Prajval Shetty Jun 23, 2017 7:59 AM (in response to Robin West)
Re: Rotating Entire Label by 90 Degree for YZB200 SAP Smartforms
Thanks Robin.
I was able to solve the rotation issue by designing smartform as per YZB200.
Clint Hightower Jun 23, 2017 8:23 AM (in response to Prajval Shetty)
Re: Rotating Entire Label by 90 Degree for YZB200 SAP Smartforms
Awesome,
I'm glad you were able to solve your issue. I have the same issue because I'm at a much lower level ... I don't
even know what smartform is and I don't know how to input the FWR command to rotate my paypal labels 90
degrees in my GX420d smh .... to you know where to input the FWR command? Thanks
Robin West Jun 23, 2017 8:59 AM (in response to Clint Hightower)
Hi Clint, Are you working with straight ZPL, or working with a print driver? What is your situation?
Clint Hightower Jun 23, 2017 9:30 AM (in response to Robin West)
Re: Rotating Entire Label by 90 Degree for YZB200 SAP Smartforms
HI Robin,
I think I'm just working with a driver. I selected the Zebra LP2844-Z - 4.0"x6.0"
Clint
Robin West Jun 23, 2017 9:37 AM (in response to Clint Hightower)
Hi Clint, You really need to go to Zebra.com and download the ZDesigner driver. The default
Windows one that I believe you are using is not really useful. Once you install that, you should be
able to go into the printing preferences and change to landscape mode (under Options).
https://developer.zebra.com/thread/34409 2/5
3/26/2019 Rotating Entire Label by 90 Degree for YZB200 S... | Zebra Technologies Developer Portal
FYI, FWR is only if you are working with ZPL and will not rotate the entire label, just individual
fields.
Robin
Clint Hightower Jun 23, 2017 9:57 AM (in response to Robin West)
Re: Rotating Entire Label by 90 Degree for YZB200 SAP Smartforms
I have that driver and I've seen the landscape/portrait options but nothing changes when I select
either of them ... ???
Robin West Jun 23, 2017 2:29 PM (in response to Clint Hightower)
Hi Clint, You tried printing with both options? Check also if your driver has any "Custom
Commands" listed, and if the "Use printer settings" on the Advanced setup menu is checked.
Prajval Shetty Jun 27, 2017 9:21 AM (in response to Robin West)
Re: Rotating Entire Label by 90 Degree for YZB200 SAP Smartforms
Hi Robin,
I have been able to print on Desktop Printer ZT410 using smartform using Device Type YZB200.
But now requirement is to use Mobile Printer QLN420. But when i use the same device type YZB200 for mobile
printer all labels whil printing are shifted by half. In short printing starts from middle of the label whereas ZT410
works fine.
https://developer.zebra.com/thread/34409 3/5
3/26/2019 Rotating Entire Label by 90 Degree for YZB200 S... | Zebra Technologies Developer Portal
Is there any specific technique to handle mobile printers while printing using smartform.
Robin West Jun 27, 2017 11:54 AM (in response to Prajval Shetty)
Hi Prajaval, You might need to do a little pre-setup on the printer before using SAP to print. I would
recommend using the Printer Setup Utilities | Zebra application to setup the print settings to your label size.
I'm not sure which settings the Device Type YZB200 is setting, so I can't tell you much about how to fix it from
there. It may be using some of the printer defaults which is why your label is off. If you do the setup with the
Printer Setup program, it will set all the settings you need for your specific labels.
Clint Hightower Jun 23, 2017 6:38 AM (in response to Prajval Shetty)
Re: Rotating Entire Label by 90 Degree for YZB200 SAP Smartforms
The command for rotating the entire label is "FWR" but I don't know how to enter it...
Prajval Shetty Jun 23, 2017 7:58 AM (in response to Clint Hightower)
Correct Answer Re: Rotating Entire Label by 90 Degree for YZB200 SAP Smartforms
Hi Clint,
Ya I am aware that FWR command can be used but I guess its for LZEB2 device type. Here the subject in the
question is different device type. So I had a confusion.
Neverthless I was able to rotate the label using smartform by designing as per YZB200 device type.
In order to use commands you have to define in Print Controls and use it in command node of smartform.
Hi Prajal,
Can you please give some example of how to create individual commands to rotate text on YZB200?
Hi Praj
Could you please help me with the proceedure to rotate the label by 90 Degree using device type YZB100 or
YZB200?
https://developer.zebra.com/thread/34409 4/5
3/26/2019 Rotating Entire Label by 90 Degree for YZB200 S... | Zebra Technologies Developer Portal
Thanks in Advance.
-Uday.
ACTIONS
Re: Label is rotated when using device type YZB200L for SAP Smartforms
Help & Feedback About Us Site Map Terms & Conditions Privacy Policy
© 2019 ZIH Corp and/or its affiliates. All rights reserved. Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in
many jurisdictions worldwide.
All other trademarks are the property of their respective owners.
https://developer.zebra.com/thread/34409 5/5