Documente Academic
Documente Profesional
Documente Cultură
PROPOSAL PROJECT
SHOES RACK
PREPARED FOR:
PROF. Dr. MOHAMAD YUSRI BIN AMAN
SUBMISSION DATE:
24 MARCH 2019
Table of Content
1.1. INTRODUCTION
Recycling is the process of converting waste materials into new materials and objects. It is an
alternative to "conventional" waste disposal that can save material and help lower greenhouse
gas emissions. Recyclable materials include many kinds of glass, paper, cardboard, metal,
plastic, tires, textiles, and electronics.
For our project, we choose to produce a multifunction shoe rack. This is multifunction shoe
rack will use a recyclable tank to build for compiling and arranging the shoes, boots, slippers
neatly. This is multifunction shoe rack is very useful in environments with limited availability of
space for an additional piece of furniture serving as an umbrella storage area and for decoration in
our house. Our shoe rack is designed in a closed condition that can open when we want to keep or
to use our shoes. The household problem of putting away shoes and always requiring a certain
space is currently solved by this design.
1.2. PROBLEM STATEMENT
Basically, there are a lot of aspects need to be considered when designing the closed ‘Shoe Rack’.
Design of the furniture is essential to ensure that it can easily be adapted for space layout. One
major problem that can be seen in the ready-made design configuration of advanced shoe rack
can’t be changed with the environment. Furthermore, the existing closed shoe rack product does
not use the concept of DIY, usually this product is pre-install and caused difficulties to move or
slipper the product for point to another point. The product introduces simple functional design and
easy installation method by incorporation DIY method. The product is aimed be packed in a flat
packed boxes that could fit in box boots of any for ease of transportation.
Therefore, to overcome this problem, the modular design shoe rack is proposed so that this
shoe rack can be adapted to the various aspects of the furniture layout. Through creativity and
customer needs, they are able to combine the shoe rack in a various conditions based on various
configuration of the shoe rack. (Snedd, 1992)
1.3. METHODOLOGY
1.3.1. Procedure
Fill it up with water like the entire way and the important things is to make sure that initial cuts
are in the water filled portion of tank. Once make a sufficient cut let the waters drain out and make
sure to let it air out before wash it again.
After finish clean up the tank, proceed to design that already have.
Then level each of the tank by using slide of wood to ensuring every level is stacked in order.
Finally, after finish all the method, re-paint the tank to make it more durable. Besides that, it also
adds a beauty to the shoe rack and attracts the buyer's attention.
Before proceed to the method, the important things that should do is protection to our body.
Personal Protective Equipment (PPE) should be worn to protect your hearing, lungs, eyes, hands
and feet from injury.
1.3.2.1. Eye protection. Safety goggles need to be worn to protect eyes from flying particles and
sparks.
1.3.2.2. Ear Protection. Muffs or ear plugs will lessen the risk of hearing damage.
1.3.2.3. Hand Protection. Gloves provide protection from sparks, and small fragments of disk and
waste metal thrown out by the disk.
1.3.2.4. Footwear. Wear steel toe cap shoes or boots with good grips.
Tong drum