Documente Academic
Documente Profesional
Documente Cultură
II-15. ENABLER
UNPACKING
INSTALLATION
RETURNING OF INSTALLED FUNCTION
Main
Menu
Menu
The following procedure is the same for all of GP-1070, GP-1080, GS-1010 and
GS-1020.
Turn the power ON with the main power switch while pressing [0] and [8]
simultaneously.
When the ADJUSTMENT screen appears, key in [3840] and press the [START]
button.
[GP-1070]
Press [INSTALL] on the license management
screen.
Press [INSTALL].
When [OK] is pressed, the e-STUDIO will be rebooted in the normal mode.
[GP-1080]
Press [INSTALL] on the license management
screen.
Press [INSTALL].
[GS-1010]
Press [INSTALL] on the license management
screen.
Press [INSTALL].
[GS-1020]
Press [INSTALL] on the license management
screen.
Press [INSTALL].
■ The following procedure is the same for all of GP-1070, GP-1080, GS-1010 and
GS-1020.
Shut down the e-STUDIO by pressing the [ON/OFF] button until you hear a sound.
The functions installed in the e-STUDIO can be returned to the same enabler which
you used for the installation.
Press [REMOVE].
Press [OK].
Main
Menu
Menu
Next Chapter