Sunteți pe pagina 1din 2

Institute of Technology, Zakura campus, University of Kashmir.

Assignment 1
Subject: Analog Electronics Semester 4th
Department: Electrical Engineering
Last Date of submission: 11 April 2019 (Before 1:30 pm) Dated:08 April 2019.

Q1. The value of β for a transistor is 100. If the value of emitter current is 10 mA. Then determine the
values of collector and base currents.
Q2. The value of α for a BJT is 0.95. Find the value of β. Also find value of α, if β changes to 100.
Q3. For an NPN transistor the IE =10 mA and β = 100 . Determine IC and IB.
Q4. For the circuit shown determine the operating point. Assume β=100 , RB=530k,Rc=2k,Vcc=6V (Fig 1).
VCC

RB RC
RC

AC

Figure 1 Figure 2
Q5. For the circuit with β=75. Determine IB, IC,VCE. Given Rc=800,Rb=200K, Vcc is 20V. (Figure 1).
Q6. For the circuit with β=100. Determine RB,VC(between collector and ground). Given Rc=0.3K, Vcc is
12V. (Figure 1).
Q7. Determine Region of operation for a BJT with ICmax=7mA,VCEmax=17v and PCmax=40mW assume
appropriate characteristics.
Q8. The common-emitter current gain of the transistor shown in figure (a) is β=75. The voltage VBE in on

state is 0.7V. Calculate IE, RC (a) (b) (c)


Q9. The common-emitter current gain of the transistor shown in figure (b) is β=75. The voltage VBE in on
state is 0.7V. Calculate IC, RC
Q10. For the transistor in the circuit of figure (c) β=100. The voltage VB is

(d) (e)
Q11. .For the transistor in the circuit of figure (d), β=100. Calculate Q point.
Q12. Determine the region of operation for the transistor shown in figure (e).
(f) (g) (h)
Q13. For the circuit shown in figure (f) if the β=60. Calculate VECQ
Q14. For the network of Figure (g)
a. Determine re.
b. Find Zi (with ro =∞Ω).
c. Calculate Zo (with ro =∞Ω).
d. Determine Av (with ro =∞Ω).
Q15. 10. Calculate IB, IC, VCE, VC, VE, VB, VBC (refer figure h)
Q16. In the circuit shown in figure (i), voltage VE= 4V, Calculate β and α for the circuit.
Q17. The circuit shown in figure (j) has a Q-point of (2A, 12V) when β= 60 calculate the value of RC and RB
Q18. For the circuit in fig. figure (k), if β=60, calculate the value of VECQ

(i). (j) (k)

Note:
 Students are free to discuss the problems faced in solving the test sheet during lunch
break/free classes.
 The assignment has to be strictly submitted on time. Any submission after the deadline time
will not be accepted.
 The assignment is to be submitted on plane sheets stapled together without any file cover.
 In case the deadline date is not a working day, then the next working day with same time
stamp would be considered as last date for submission.

S-ar putea să vă placă și