Documente Academic
Documente Profesional
Documente Cultură
TIC: Isuzu is a member of the Truck Industry Council - Safer Greener Essential.
NPR 45/55 TIPPER - ARK1109 02/19
NPR 45/55-155 Tipper
CLUTCH
• Auto adjusting hydraulic control with vacuum assistance.
Single plate 325 mm diameter.
• Total lining area: 966 cm²
TRANSMISSION
ISUZU MYY-6E
• 6 speed manual. Syncromesh on gears 1-6.
•G ear ratios (: 1)
1st 2nd 3rd 4th 5th 6th Rev
5.979 3.434 2.040 1.379 1.000 0.750 5.701
AXLES STEERING
Front: Isuzu F031 • Power assisted recirculating ball steering.
• Reverse Elliot I-beam. 3,100 kg capacity. • Gear ratio: 20.9:1
Rear: Isuzu R066 • Turns lock to lock: 5.4
• Full floating Banjo type. Four differential pinions. 6,600 kg capacity. • Maximum angle: 43° (inside wheel) / 33° (outside wheel)
• Drive ratio: 3.909:1
WHEELS AND TYRES
SUSPENSION • 16 x 5.5J six stud steel wheels.
Front: • 195/85R16 114/112L Michelin XJE4 Mix Energy Tubeless.
• Single stage alloy steel taper leaf springs. • Maximum tyre rating:
• Double acting hydraulic shock absorbers. Stabiliser bar. Steer axle: 2,360 kg
Rear: Drive axle: 4,480 kg
• Multi leaf main spring, taper leaf helper spring. • 1 frame mounted spare wheel and tyre assembly.
• Double acting hydraulic shock absorber. Stabiliser bar.
CHASSIS FRAME
BRAKES •C old rivetted ladder frame. SAPH440 weldable steel sidemembers. Parallel
• Auto adjusting front and rear disc brakes with dual circuit hydraulic control, side rails and rivetless top flange.
vacuum assistance and electronic brake force distribution (EBD). • Frame dimensions:
• ABS, ASR traction control, IESC stability control. Side rail (mm): 216 x 70 x 6.0
• Hill Assist. Rear frame width (mm): 850
• Front disc diameter: 293 mm TIPPER BODY
• Rear disc diameter: 293 mm
• All steel body with drop sides. Auto release two-way tailgate.
• 190 mm diameter drum park brake mounted on rear of transmission.
• Auto release body lockdown hook.
• Vacuum controlled exhaust brake.
• Shovel rack. LHS and RHS rope rails. Non-slip side steps.
• 20 second raise / 20 second lower time.
• Cubic volume: 2.3 m3
• Deck plate thickness: 3.2 mm
• Side / front / tail plate thickness: 2.3 mm
WEIGHTS (kg)
Ratings* Loading Limit* (at ground) Weight #
Models
GVM GCM Front Rear Front Rear Total
NPR 45/55-155 TIPPER 4,500 / 5,500 8,000 / 9,000 2,360 4,480 1,785 1,460 3,245
* Vehicle ratings and front/rear weight limits are subject to government regulatory requirements and weight distribution analysis. Consult your Isuzu dealer to select the correct vehicle for your specific application.
# Vehicle as supplied and including 10 litres of fuel.
Turning Circle
(kerb to kerb)
9.6 m