Documente Academic
Documente Profesional
Documente Cultură
DESCRIPCION
-Check design compression strength of rectangular or square HSS members to AISC LRFD 3rd Ed. See HSS Specification Chapter 7
-Material de acuerdo a la especificacion ASTM A500 Grado B
INPUT PARAMETERS
CONDICIONES DE FRONTERA
-unbraced length factor Kx = = 0.5 [] 0.5 []
-unbraced length factor Ky = = 0.5 [] 0.5 []
MATERIAL
-Yield strength Fy = = 50 [ksi] 3515 [kg/cm2]
-Elastic Modulus E = = 29000 [ksi] 2039432 [kg/cm2]
PROPIEDADES DE LA SECCION
-Member Designation = 196.8503937 [] HSS406.4X406.4X12.7 []
-Gross Area Ag = index(table,row,4) = 28.30 [in^2] 183 [cm^2]
-Radius of Gyration about X RX = index(table,row,34) = 6.31 [in] 16.0 [cm]
-Radius of Gyration about Y RY = index(table,row,38) = 6.31 [in] 16.0 [cm]
-Wall thickness wt = index(table,row,15) = 0.465 [in] 1.18 [cm]
-Base bb = index(table,row,9) = 16.00 [in] 41 [cm]
-Heigth Ht = index(table,row,6) = 16.00 [in] 41 [cm]
-Flange Wall Slenderness bt = index(table,row,24) = 31.4 [] 31 []
-Web Wall Slenderness ht = index(table,row,26) = 31.4 [] 31 []
-Plastic Modulus about x-x Zx = index(table,row,32) = 164.0 [in^3] 2687 [cm^3]
-Elastic Modulus about x-x Sx = index(table,row,33) = 141.0 [in^3] 2311 [cm^3]
-Plastic Modulus about y-y Zy = index(table,row,36) = 164.0 [in^3] 2687 [cm^3]
-Elastic Section Modulus about y-y Sy = index(table,row,37) = 141.0 [in^3] 2311 [cm^3]
CALCULATIONS
AXIAL COMPRESSION
ESBELTEZ
-Esbeltez about x-x SLx = Kx*L/RX = 15.60 [] 15.60 []
-Esbeltez about y-y SLy = Ky*L/RY = 15.60 [] 15.60 []
if(max(SLx, SLy)>200,"NOT
-Check Slenderness OK","OK") = OK [] [] 2.3
COMPRESSION AXIAL
-Limite de Esbeltez Parameter lr1 = 1.40*sqrt(E/Fy) = 33.72 [] 33.72 [] Table 2.2-2
if(SLy>SLx, "Y-Y Buckling","X-X
-Eje de Pandeo Buckling") = X-X Buckling
-Parametro de Esbeltez de la Columna lc = max(SLx,SLy)*(1/pi())*sqrt(Fy/E) = 0.206 [] 0.206 [] (4.2-4)
FLEXURE
-Maximum wall slenderness for compact section lp = 3.76*sqrt(E/Fy) = 90.6 [] 90.6 [] (Table 2.2-1)
-Maximum wall slenderness for non-compact section lr = 5.70*sqrt(E/Fy) = 137.3 [] 137.3 [] (Table 2.2-1)
if(and(bt<lp,ht<lp)=true,"Compact
Section",if(and(bt>lr,ht>lr)=true,"Sle
-Check if compact or non-compact or Slender Section nder","Non-Compact")) = Compact Section
-Bending About x-x
-Lambda lsx = bt = 31.40 [] 31.40 []
FLEXURAL YIELD STRENGTH
-Factored Nominal yielding moment about x-x Mpx = 0.9*Zx*Fy/12 = 615 [kip-ft] 83583.26532 [kg-m] (5.1-4)
FLEXURAL LATERAL TORSIONAL BUCKLING
-Limiting Buckling Moment Mrx = 0.9*Fy*Sx/12 = 528.5 [kip-ft] 71861.2 [kg-m] (5.1-5)
min(1.91*sqrt(E/Fy)*(1-
-Effective width Bex = (0.381/bt)*sqrt(E/Fy)),bb) = 16.00 [in] 40.64 [cm]
((Be*Ht^3)-((Be-2*wt)*(Ht-
-Section modulus based on effective width Sx2 = 2*wt)^3))/(6*Ht) = 92.7 [in^3] 1518.3 [cm^3] (5.1-7)
if(lsx<=lp,Mpx,if(and(lsx>lp,lsx<=l
r)=true,Mpx-(Mpx-Mrx)*(lsx-lp)/(lr-
-Factored Nominal Flexural Strength about x-x Mn1 = lp),0.9*Fy*Sx2/12)) = 615 [kip-ft] 83583.3 [kg-m] (5.1-4,5,6)