Documente Academic
Documente Profesional
Documente Cultură
FP
A truly high performance machine
ZAXIS850H
Notes :
1. Never leave the front attachment in a raised position.
Make sure the front attachment is lowered to the ground before leaving the
equipment unattended. (Some of the pictures in this catalog show an
unmanned machine with attachments in an operating position. These were
taken for demonstration purposes only and the actions shown are not
recommended under normal operating conditions.)
2. Caution plates on the machine will vary according to
country.
3. Photos include optional equipment.
2-3
Z A X I S
Work Modes for
Increased Performance
The four work modes have been
enhanced from prior models.
mproved
I
ZAXIS uses General purpose mode
Trench digging mode
advanced technology Attachment mode
Productivity
Precision mode
to reduce costs
while working faster.
&
aster Work
F Completion
5 % increase
in production (in H/P mode)
(compared to EX750-5)
Large Bucket Capacity Boosts Productivity Travel Power You Can Depend on
332 kN (33 900 kgf)
EX800H-5 353 kN (36 000 kgf)
ZAXIS850H
The ZAXIS800 has a bucket capacity that contributes to Travel power 15% up:
Arm:
its productivity. It has been designed to reduce wear.
The rock bucket has lateral-type wear plates that are easy
487 kN (49 700 kgf)
EX750-5
560 kN (57 100 kgf)
to replace.
266 kN (27 100 kgf)
EX750-5
273 kN (27 900 kgf)
ZAXIS800 Backhoe bucket: Rock bucket:
3.3 m
3.4 m3 3.3 m 3
3.4 m3
3
4-5
Z A X I S
Safety
inimum
M
The operator's * The CRES cab meets OPG top guard level (ISO).
The cab is designed with "just in case" protection for
compartment is designed the operator. The rigid cab design reduces the potential
aximum
M Efficiency
CRES Cab
Reinforced sections
Comfort Increased to shown in red
Reduce Operator Fatigue
A reshaped X-beam track
frame, D-type frame and rigid
cab bed work together with the
Lock
silicone-filled rubber cushions
Unlock
to keep noise and vibration.
Lower noise and vibration
contribute to less operator
fatigue.
Lock release
lever
6-7
Z A X I S Z A X I S
Equipment Operation Status Report
Extensive steps
F unctional
&
urable
have been taken
to support basic
performance and
Onboard ICX
IT
nformation
echnology
D overall durability.
Reinforced Side Steps
( Information
Controller )
Support
Providing the data for making
the right decisions.
Lower running
costs
Information Services for Equipment
Operation record
Error record
Alarm record
Frequency distribution
Durable Bucket Joint Rugged Undercarriage for Withstanding Radiator coolant /hydraulic
Tough Jobs temperature etc.
A new design is adopted to and others.
bucket joints. Bucket pins are A reshaped box design with X-beams helps disperse
solid and large, and lubricated stress.
through bosses for more This design boosts the overall rigidity of the entire
durability. The use of bucket undercarriage.
bushing reduces pin wear.
Bucket bushings Boss lubrication to bucket pins
Travel Device Reduce Damage
A compact travel device
reduces the potential for Z A X I S
damage.
EF nvironmentally
riendly
Design
Helping
ensure
a cleaner
tomorrow.
mart
S
Advanced technology Labeled Plastic Parts Facilitate
small maintenance door for easy,
helps reduce quick inspection and maintenance. Efficient Recycling
Notes :
The photo shows a cover opened at the time of the inspection.
Be sure to close a cover at the time of the operation.
8-9
SPECIFICATIONS
Heavy Duty Version H-Series
ZAXIS850H DIMENSIONS
BACKHOE
3.4 m3
rock bucket H-front (Reinforced front) M L
(Lateral-type wear plates) 8.2 m H-boom / 3.6 m H-arm F D, E
The easy-to-replace lateral-type Thicker steel plates and extra reinforcement help provide
wear plates are standard reliability during heavy duty operations.
equipment.
N
G
4.5 mm undercover for
C
upper structure
H
Square bars (5 units) J A
Helps protect both end surfaces I B
of the area under the arm. K
NOTE: This illustration shows ZAXIS800.
8
A
Max.
digging reach
Max.
*B digging depth
12 410 13 990 14 870 15 700 17 440 12 410 12 790 13 830
(40'9") (45'11") (48'9") (51'6") (57'3") (40'9") (42'0") (45'5")
7 240
(23'9")
8 880
(29'2")
9 670
(31'9")
10 550 12 060
(34'7") (39'7")
7 240
(23'9")
7 800
(25'7")
8 860
(29'1")
range of jobs.
D
20 6
Max. 4 340 7 790 8 970 9 200 10 350 4 340 5 640 6 030
15 *C vertical wall (14'3") (25'7") (29'5") (30'2") (34'0") (14'3") (18'6") (19'1")
E
4
10 Max. 11 680 12 530 13 310 13 520 14 490 11 680 11 710 12 000
2 *D cutting height (38'4") (41'1") (43'8") (44'4") (47'7") (38'4") (38'5") (39'4")
5
0 0 Max. 7 820 8 530 9 210 9 770 10 790 7 820 7 860 8 270
ZAXIS850H* ZAXIS800 ZAXIS800 Ground *E dumping height (25'8") (28'0") (30'3") (32'1") (35'5") (25'8") (25'9") (27'2")
8.2m H-Boom/3.6m H-Arm/3.4m3 Rock Bucket 8.25m Boom/3.6m Arm/3.4m3 Bucket 7.1m BE Boom/2.95m BE Arm/4.3m3 Bucket 5 2 Line
Min. 5 520 6 360 6 240 6 240 7 620 5 520 5 380 6 340
10 F swing radius (18'1") (20'1") (20'6") (20'6") (25'0") (18'1") (17'8") (20'1")
C
4
B
ZAXIS850H* ZAXIS800 ZAXIS800 15 Digging force 438 (44 700, 342 (34 900, 341 (34 800, 281 (28 700, 260 (26 500, 438 (44 700, 342 (34 900, 353 (36 000,
7.1m BE Boom/3.6m H-Arm/3.6m3 Rock Bucket 8.25m Boom/4.4m Semi-long Arm/2.8m3 Bucket 4.0m3 Bottom dump type loading shovel bucket 20 6 Bucket kN (kgf, lbf) 98 550) 76 940) 76 940) 63 270) 58 420) 98 550) 76 940) 79 370)
4.0m3 Tilt type loading shovel bucket 25 8
Arm kN (kgf, lbf) 325 (33 200, 273 (27 900, 232 (23 700, 206 (21 000, 190 (19 400, 325 (33 200, 274 (28 000, 300 (30 600,
ZAXIS850H* ZAXIS800 Backhoe Mounted Barge / Clamshell / Breaker
30
10
73 190) 73 190) 61 510) 46 300) 42 700) 73 190) 61 730) 67 460)
7.1m BE Boom/2.95m BE Arm/4.3m3 Rock Bucket 8.25m Boom/5.4m Long Arm/2.2m3 Bucket 35 Notes: * Excluding track shoe lug
40 12 *2 Identical to Quarry specifications (Q.S.)
ZAXIS850H* ZAXIS800 45 14 A
3.6m3 Bottom Dump Type Loading Shovel Bucket 10.0m Long Boom/5.4m Long Arm/1.8m3 Bucket Loading Shovel 50 20 18 16 14 12 10 8 6 4 2 0 Meter
4.0m3 Tilt Type Loading Shovel Bucket
45 40 35 30 25 45 40 35 30 25 20 15 10 5 0 Feet
* Quarry specifications also available. ZAXIS800
10.0m Long Boom/9.5m Super-Long Arm/1.5m3 Bucket NOTE: This illustration shows ZAXIS800.
10 - 11
SPECIFICATIONS
N
at 1 500 min-1 (rpm)
G type. Swing cushion valve built in swing motor absorbs shocks when
Piston Displacement ................................................. 15.681 L (957 in3) stopping swings.
Bore and stroke ................................... 147 mm X 154 mm (5.7" X 6.1") Swing speed ................................................................. 8.2 min-1 (rpm)
C
H
12 - 13
SPECIFICATIONS TRANSPORTATION
ZAXIS800: Equipped with 7.1 m (23'4") BE-boom, 2.95 m (9'8") BE- BACKHOE ATTACHMENTS
A Basic machine (without front attachment, counterweight)
3 3
arm, and 4.3 m (5.62 yd ): SAE, PCSA heaped rock bucket.
Boom and arms of all-welded, box-section design. 7.1 m (23'4") BE- : Loading Shovel
Shoe type Shoe width Operating weight Ground pressure boom, 8.25 m (27'1") boom, 10.0 m (32'1") long boom, 8.2 m (26'11") H- Overall
Shoe width A B Weight
650 mm 75 700 kg 103 kPa boom, 2.95 m (9'8") BE-arm, 3.6 m (11'1"), 3.6 m (11'1") H-arm, 4.4 m width
(26") (166 900 lb) (1.05 kgf/cm2, 14.9 psi) (14'5") arm, 5.4 m (17'9") arm and 9.5 m (31'2") long arms are available. 650 mm 6 600 mm 3 570 mm 3 490 mm 45 700 kg
Double 750 mm 76 400 kg 90 kPa Bucket is all-welded, high-strength steel structure. Side clearance (26") (22'1") (11'8") (11'5") (102 100 lb)
ZAXIS800
grouser (30") (168 400 lb) (0.92 kgf/cm2, 13.1 psi) adjust mechanism provided on the bucket joint bracket. B 750 mm 6 600 mm 3 570 mm 3 580 mm 46 400 kg
(30") (22'1") (11'8") (11'9") (103 600 lb)
900 mm 77 400 kg 76 kPa Booms and Arms are available as follows: 650 mm 6 600 mm 3 690 mm 3 490 mm 46 600 kg
(35") (170 600 lb) (0.78 kgf/cm2, 11.1 psi) ZAXIS850H*
Boom Arm (26") (22'1") (12'1") (11'5") (102 700 lb)
ZAXIS850H: Equipped with 8.2 m (26'11") H-boom, 3.6 m (11'1") H- 7.1 m (23'4") BE-boom 2.95 m (9'8") BE-arm * Identical to Quarry specifications (Q.S.)
arm, and 3.4 m3 (4.45 yd3): SAE, PCSA heaped rock bucket. ZAXIS800 8.25 m (27'1")
3.6 m (11'1"),
4.4 m (14'5") and 5.4 m (17'9")
Shoe type Shoe width Operating weight Ground pressure
10.0 m (32'1") 5.4 m (17'9") and 9.5 m (31'2")
Double 650 mm 75 900 kg 103 kPa
grouser (26") (167 300 lb) (1.05 kgf/cm2, 14.9 psi) 8.2 m (26'11") H-boom 3.6 m (11'1") H-arm
ZAXIS850H 7.1 m (23'4") BE-boom 3.6 m (11'1") H-arm Basic machine
ZAXIS850H: Equipped with 7.1 m (23'4") BE-boom, 3.6 m (11'1") H- 7.1 m (23'4") BE-boom 2.95 m (9'8") BE-arm (without front attachment, side frame, steps on the hydraulic
arm, and 3.6 m3 (4.71 yd3): SAE, PCSA heaped rock bucket. * A variety of front-equipments that meet the quarry specification is provided. oil tank and hand rails on the right-hand frame)
Shoe type Shoe width Operating weight Ground pressure B Overall
A B Weight
Double 650 mm 76 100 kg 104 kPa width
grouser (26") (167 800 lb) (1.06 kgf/cm2, 15.0 psi) LOADING SHOVEL ATTACHMENTS 5 760 mm 2 890 mm 3 200 mm 23 100 kg
ZAXIS800
(18'11") (9'6") (10'6") (50 900 lb)
Boom and arm are of all-welded, box-section design. Efficient, automatic 5 730 mm 2 890 mm 3 200 mm 23 200 kg
ZAXIS850H*
level crowding achieved by one-lever control because the parallel link (18'1") (9'6") (10'6") (51 100 lb)
mechanism keeps the bucket digging angle constant, and level cylinder A * Identical to Quarry specifications (Q.S.)
circuit maintains the bucket height constant. (Auto-Leveling Crowd
Mechanism)
Buckets
Recommendation
Capacity Width ZAXIS800 ZAXIS850H *3
No. BE-front BE-front H-front B
of Weight 8.25 m (27'1") 10.0 m (32'1")
teeth 7.1 m (23'4") boom boom 7.1 m (23'4") 8.2 m (26'11")
Without With BE-boom BE-boom H-boom
SAE, PCSA CECE side side 2.95 m (9'8") 3.6 m (11'1") 4.4 m (14'5") 5.4 m (17'9") 5.4 m (17'9") 9.5 m (31'2") 2.95 m (9'8") 3.6 m (11'1") 3.6 m (11'1")
heaped heaped cutters cutters BE-arm arm arm arm arm arm BE-arm H-arm H-arm
1.5 m3 1 270 mm 1 400 mm 1 130 kg
(1.96 yd3) 1.3 m3 (50") (55") 5 (2 490 lb)
1.8 m3 1 220 mm 1 360 mm 1 870 kg A
(2.35 yd3) 1.6 m3 (48") (54") 5 (4 120 lb)
2.2 m3 1 450 mm 1 590 mm 2 140 kg
(2.88 yd3) 2.0 m3 (57") (63") 5 (4 720 lb)
2.4 m3 1 420 mm 1 560 mm 2 350 kg
(3.14 yd3) 2.2 m3 (56") (61") 5 (5 180 lb)
2.8 m3
2.4 m 3 1 510 mm 1 700 mm
5
2 400 kg Side frame
(3.66 yd3) (60") (67") (5 290 lb)
3.4 m3 1 850 mm 2 040 mm 2 650 kg Overall
3.0 m3 5 Shoe width A B Weight
(4.45 yd3) (73") (80") (5 840 lb) width
4.3 m3 3 2 130 mm 3 580 kg 650 mm 6 350 mm 1 470 mm 820 mm 11 600 kg
(5.62 yd3) 3.8 m - (84") 5 (7 890 lb) B (26") (20'1") (4'1") (2'8") (25 600 lb)
* 3.4 m3
1 1 940 mm 3 460 kg ZAXIS800
(4.45 yd3) 3.0 m3 - (76") 5 (7 630 lb)
750 mm 6 350 mm 1 470 mm 820 mm 11 950 kg
(30") (20'1") (4'1") (2'8") (26 300 lb)
*1 3.6 m3 3.2 m3 -
1 960 mm
5
3 490 kg
(4.71 yd3) (77") (7 690 lb) 650 mm 6 350 mm 1 470 mm 820 mm 11 700 kg
A ZAXIS850H* (26") (20'1") (4'1") (2'8") (25 800 lb)
*1 4.3 m3 3.8 m3 -
2 130 mm
5
4 100 kg
(5.62 yd3) (84") (9 040 lb)
* Identical to Quarry specifications (Q.S.)
*2 1.9 m3 1.7 m3 -
1 490 mm
3
4 100 kg
(2.49 yd3) (59") (9 040 lb)
*2 2.2 m3 2.0 m3 -
1 580 mm
3
4 300 kg
(2.88 yd3) (62") (9 480 lb)
2 600 kg
One-point Ripper 1 (5 730 lb) Counterweight
*1 Rock bucket Suitable for materials with density of 1 800 kg/m3 (3 030 lb/yd3) or less Heavy-duty service Not applicable Can't installed A B Overall height Weight
*2 Ripper bucket B
*3 Identical to Quarry specifications (Q.S.) 3 190 mm (10"6") 715 mm (2'4") 1 440 mm (4'9") 12 500 kg (27 600 lb)
Loading Shovel Bucket (PCSA heaped)
Capacity Max. width No. of teeth Weight Type A
3.6 m3 (4.71 yd3) 2 300 mm (7'7") 6 6 080 kg (13 410 lb) Bottom dump type rock bucket
4.0 m3 (5.23 yd3) 2 460 mm (8'1") 6 5 620 kg (12 390 lb) Bottom dump type general purpose bucket
4.0 m3 (5.23 yd3) 2 360 mm (7'9") 6 4 980 kg (10 980 lb) Tilt dump type rock bucket
4.4 m3 (5.75 yd3) 2 520 mm (8'3") 6 4 630 kg (10 210 lb) Tilt dump type general purpose bucket
14 - 15
TRANSPORTATION
3 200 mm (10'6")
A A B Overall width Weight Bucket capacity Weight Overall width
7.1 m (23'4") 7 500 mm 2 450 mm 1 420 mm 7 200 kg (PCSA heaped)
BE-boom (24'7") (8'0") (4'8") (15 900 lb) 3.6 m3 17 500 kg 2 400 mm
8 500 mm 1 900 mm 1 420 mm 7 090 kg (4.71 yd3) (38 600 lb) (7'1")
8.25 m (27'1") (27'11") (6'3") (4'8") (15 600 lb) 4.0 m3 17 000 kg 2 560 mm
8.2 m (26'11") 8 620 mm 2 440 mm 1 420 mm 7 610 kg (5.23 yd3) (37 500 lb) (8'5")
B
H-boom (28'3") (8'0") (4'8") (16 800 lb)
10 310 mm 2 320 mm 1 420 mm 8 020 kg
10.0 m (32'1") (33'1") (7'7") (4'8") (17 700 lb) 9 800 mm (32'2")
Arm
A B Overall width Weight
2.95 m (9'8") 4 410 mm 1 700 mm 840 mm 4 350 kg
A BE-arm (14'6") (5'7") (2'9") (9 600 lb)
5 065 mm 1 190 mm 840 mm 3 590 kg
3.6 m (11'1") (16'7") (3'11") (2'9") (7 900 lb)
3.6 m (11'1") 5 065 mm 1 190 mm 840 mm 4 010 kg
H-arm (16'7") (3'11") (2'9") (8 800 lb)
3 070 mm (10'1")
B 5 820 mm 1 320 mm 840 mm 3 900 kg
4.4 m (14'5") (19'1") (4'4") (2'9") (8 600 lb) Loading Shovel Front Attachment (Without Bucket)
5.4 m (17'9")
6 820 mm 1 270 mm 840 mm 3 990 kg Weight : 11 450 kg (25 200 lb)
(22'5") (4'2") (2'9") (8 800 lb) Overall width : 1 450 mm (4'9")
Bucket
Capacity
Overall
SAE, PCSA CECE A B Weight
width 7 770 mm (25'6")
heaped heaped
1.5 m3 1 860 mm 1 430 mm 1 400 mm 1 130 kg
1.3 m3
(1.96 yd3) (6'1") (4'8") (55") (2 490 lb)
1.8 m3 2 115 mm 1 735 mm 1 360 mm 1 870 kg
1.6 m3
(2.35 yd3) (6'11") (5'8") (4'6") (4 120 lb)
2.0 m3 2 115 mm 1 735 mm 1 490 mm 2 060 kg
1.8 m3
(2.62 yd3) (6'11") (5'8") (4'11") (4 540 lb)
2.2 m3 2 120 mm 1 740 mm 1 590 mm 2 140 kg
B 2.0 m3
(2.88 yd3) (6'11") (5'9") (63") (4 720 lb) Loading Shovel Bucket
2.4 m3 2 210 mm 1 870 mm 1 560 mm 2 350 kg
2.2 m3 Bucket A B Max. width Weight
(3.14 yd3) (7'3") (6'2") (5'1") (5 180 lb) Type
capacity mm(ft in) mm(ft in) mm(ft in) kg(lb)
2.8 m3 2 210 mm 1 870 mm 1 700 mm 2 400 kg
2.4 m3 3.6 m3 2 280 2 570 2 300 6 080 Bottom dump type
(3.66 yd3) (7'3") (6'2") (5'7") (5 290 lb) B (4.7 yd3) (7'6") (8'5") (7'7") (13 410) rock bucket
3.4 m3 2 210 mm 1 870 mm 2 040 mm 2 650 kg
A 3.0 m3 4.0 m3 2 300 2 570 2 460 5 620 Bottom dump type
(4.45 yd3) (7'3") (6'2") (6'8") (5 840 lb)
(5.23 yd3) (7'7") (8'5") (8'1") (12 390) general purpose bucket
4.3 m3 2 350 mm 1 950 mm 2 130 mm 3 580 kg
3.8 m3 4.0 m3 2 290 2 560 2 360 4 980 Tilt dump type
(5.62 yd3) (7'9") (6'5") (6'12") (7 890 lb)
(5.23 yd3) (7'6") (8'5") (7'9") (10 980) rock bucket
3.4 m3* 2 260 mm 1 930 mm 1 940 mm 3 460 kg
3.0 m3 4.4 m3 2 290 2 560 2 520 4 630 Tilt dump type
(4.45 yd3) (7'5") (6'4") (6'4") (7 630 lb)
(5.75 yd3) (7'6") (8'5") (8'3") (10 210) general purpose bucket
3.6 m3* 2 260 mm 1 930 mm 1 960 mm 3 490 kg
3.2 m3
(4.71 yd3) (7'5") (6'4") (6'5") (7 690 lb) A
4.3 m3* 2 350 mm 1 950 mm 2 130 mm 4 100 kg
3.8 m3
(5.62 yd3) (7'9") (6'5") (6'12") (9 040 lb)
* Rock Bucket. Identical to Quarry specifications (Q.S.)
A
Boom cylinders
B
700 kg (1 540 lb) X 2
A B
2 900 mm (9"6") 530 mm (1'9")
B Left sidewalk
A B Weight
A 2 405 mm 340 mm 20.2 kg
Front (7'11") (1'1") (44.5 lb)
B 2 410 mm 425 mm 20.7 kg
Reverse (7'11") (1'5") (45.5 lb)
A
B
Step
18 kg (40 lb) X 4, 12.7 kg (28 lb) X 4
A
A B C Overall height
C
540 mm (1"9") 215 mm (8.5") 90 mm (3.5") 125 mm (4.9")
16 - 17
LIFTING CAPACITIES
METRIC MEASURE Heavy-lifting system Rating over-side or 360 degrees Rating over-front Unit: 1 000 kg
METRIC MEASURE Heavy-lifting system Rating over-side or 360 degrees Rating over-front Unit: 1 000 kg
18 - 19
STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details.
OPTIONAL EQUIPMENT Optional equipment may vary by country, so please consult your Hitachi dealer for details.
• Hose rupture valves • Travel motion alarm device • H-track guard (dual type)
• Electric fuel refilling pump • Attachment basic piping • Full track guard
• Swing motion alarm device with • Accessories for breaker • Counterweight removal device
lamps • Accessories for breaker & crusher • Right sidewalk
• Auto-grease lubricator • Accessories for 2 speed selector • 7.1 m (23'4") BE-boom
• Electric grease gun with hose-reel • Front glass lower guard • 2.95 m (9'8") BE-arm
• OPG top and front guard fitted • Front glass upper guard • 750 mm (30") double grouser shoes
level (ISO) compliant cab • Headguard integrated cab • 900 mm (35") double grouser shoes
Printed in Japan