Documente Academic
Documente Profesional
Documente Cultură
INNOVATION
A Research Approach for the Development of a
Framework for Innovation Management in the
Mineral Reseources Industry
Marthinus J. Du Plessis
University of Pretoria, Graduate School of,
Technology Management, South Africa
E-mail: marinus.6108@gmail.com
Marthinus J. Pretorius
University of Pretoria, Graduate School of,
Technology Management, South Africa
E-mail: tinus.pretorius@up.ac.za
Abstract
The Mineral Resources (MR) industry is not perceived to be leaders in innovation management. (MR) organisations
use different approaches towards the management of innovation and there is no evidence that an integrated best
practice for innovation management has yet emerged. A research study is underway to understand the specific
drivers and barriers of the management of innovation and to develop an innovation management model for this
industry. The intention of this model is to support such organisations to improve their innovation management
practices and therefor the innovativeness of these organisations.
The current innovation management practices not only vary between the different (MR) companies, but it also
differs from best practise characteristics as described in literature as well as from practices that are promoted by
leading innovation management consulting groups. Given this discrepancy as well as the heterogeneity between
(MR) companies, research on innovation management practices are complex and it is pivotal that an appropriate
research methodology is applied to provide unbiased, valid and useable results.
The design of a methodology for the innovation management study comprised out of four main steps namely; 1.
Understand the context of the larger study, the impact factors and constraints it poses to the research approach, the
design and the expected outputs; 2. Study literature to understand research design and methodology for complex
studies including the “Research Onion” approach. Reflect on Systematic literature review, Atlas.Ti and Delphi data
collection and analysis methods; 3. Select a set of applicable methods and develop a research approach, design
and methodology as output of this paper that will provide sound research outcomes for the larger study and 4, to
summarise the output in a research methodology diagram and report.
In this paper, a versatile research methodology is introduced for use in research studies where external expert
knowledge is required to produce solutions in a consensus seeking paradigm. The methodology is based on the
Delphi method that is suitable for complex problem cases and when the problem does not lend itself to precise
analytical techniques.
The proposed research methodology is qualitative in nature, applying systematic literature reviews and consensus
seeking Delphi focus group inputs. It compares literature outcomes with expert knowledge, semi-structured
interviews, data triangulation from different interest groups and a multi-round Delphi method application.
This research study paper contributes towards a better understanding of the possible applications of the Delphi
method in conjunction with other methods to apply in the context of complex and diverse research challenges.
The result of this methodology design will be applied in the study to develop an appropriate and useable innovation
management model for the (MR) industry and similar industries.
Keywords: Research Design, Methodology, Techniques, Delphi Method, Qualitative Studies, Research Onion, Atlas.Ti
1. Introduction
IAMOT 2019 | 3
Managing Technology for Inclusive and Sustainable Growth
about the industry is that it is slow to innovate when compared to other industries. Some leaders
within the industry echo this view. (MR) organisations also use different approaches towards the
management of innovation and there is no evidence that an end-to-end, best practice approach towards
innovation management has yet emerged. A research study is underway to understand the specific
drivers and barriers of the management of innovation and to develop an innovation management
model for this industry. The intention of this model will be to support the (MR) industry to improve
their innovation management practices and therefor the innovativeness of these organisations.
The current innovation management practices not only vary between the different (MR) companies,
but it also differs from best practise characteristics as described in literature as well as from practices
that are promoted by leading innovation management consulting groups. Given this discrepancy as
well as the heterogeneity between (MR) companies, research on innovation management practices
are complex and it is pivotal that an appropriate research methodology is applied to provide unbiased,
valid and useable results.
The objective of the larger research study is to identify the key innovation management dimensions,
determine their interrelationships and to propose an integrated management framework to contribute
to the improvement of innovation management in the (MR) industry. This objective is divided into
the following components;
●● To determine under which circumstances an inhouse innovation management structure
or function is required for organisation in general for successful innovation management
●● To identify and understand the key dimensions, the elements thereof and their
interrelationships for successful innovation management within organisations (current
theoretical models).
●● To determine the way innovation is managed in the (MR) industry (related to the current
theoretical models) and to identify the unique attributes and challenges that impact on
the level of innovativeness.
●● To determine the key dimensions of innovation management and their within the (MR)
industry interdependencies (new dimension set).
●● To design an innovation management framework for the MR industry that integrates the
key dimensions of innovation management and its corresponding elements and reflects
the interrelationships thereof.
In order to conduct such a study, an appropriate research methodology needs to be designed, which
is the outcome of the study that is described in this paper.
IAMOT 2019 | 4
A Research Approach for the Development of a Framework for Innovation Management
IAMOT 2019 | 5
Managing Technology for Inclusive and Sustainable Growth
Positivism
Philosophies
Deductive
Approaches
Survey
Experiment
Strategies
Mono Case Realism
Method Study
Choices
Cross Sectional Action
Research
Time Horizon
Data Collection Mixed Grounded
& Methods Theory
Data Analysis
Techniques
and
Procedures
Longitudinal
Multi
Method Ethnography
Pragmatism
Archival Research Inductive
Interpretivism
IAMOT 2019 | 6
A Research Approach for the Development of a Framework for Innovation Management
there in the social world; that is to acknowledge their existence, to reconstruct them, to understand
them, to avoid distorting them, to use them as building-blocks in theorizing”. Interpretivism is
defined as focussing on “meaning in context”, (Goldkuhl, G., cite Myers, 2009). It is necessary for
the researcher to understand the differences between humans in their role as social actors. The focus
of the research is on the people in their social stance rather than on objects.
Comparing Interpretivism with Pragmatism, (Goldkuhl, G., 2012), emphasises that the researcher
must enter the social environment of the research subjects and understand the world from their point
of view. The paper also distinguishes between different variants of interpretivism; conservative,
constructivist, critical and deconstructionist.
Understanding these concepts is important in the context of the methodology design (product from
this paper). The applicable paradigm for the research is mainly interpretivism because the subjective
views of the panel of experts on the relative importance of each of the innovation management
dimensions, are key. However, the design of the final innovation management model needs to be
useful and practical as well. When giving their inputs, the expert panel need to keep it in mind that
action will eventually be taken from the outcome. For this reason, the research paradigm reflects
features of a pragmatic research paradigm. A combination of the two philosophies is possible,
(Goldkuhl, G., 2012), mentioned that the two research paradigms can be combined. This paper takes
the position that interpretivist paradigm is dominant and that a pragmatical approach is supportive
to the methodology.
IAMOT 2019 | 7
Managing Technology for Inclusive and Sustainable Growth
views may change over time (ontology). The philosophy further indicates that the focus is upon the
details within a situation and seeking of the real meaning behind these details (epistemology). There
is also a believe that research is value bound.
3.3. Approaches
(Saunders, M., 2009) refers to two main research approaches, when a theory and hypotheses are
developed, a research strategy is designed to test the hypotheses. This is called the deduction
approach and it tests theory like in scientific research. On the other hand, with the induction
approach, data are collected and analysed to develop theory. Induction is about building theory and
is more applicable in social sciences. Research using an inductive approach is more interested in the
context of events and normally smaller samples are more appropriate as with a deductive approach.
Multiple collection methods of qualitative data are common for an inductive research approach.
Another way to describe the differences between the two approaches is found in (Saunders M., 2009).
When a deductive research approach is followed, existing theory will be used when determining the
research process and the data analysis procedures. However, when an inductive approach is used,
there will be a need to build theory that is grounded in the data as no predetermined theoretical or
descriptive framework exist. (Saunders, M., cite Yin R., K., 2003).
Regarding the selection of a research approach for a Systematic Literature Review (SLR), (Saunders
M., 2009) provides the following guidelines. “The precise purpose of your reading of the literature
will depend on the approach you are intending to use in your research”. Literature reviews can assist
with identification of theories and ideas to be tested using data (deductive approach). Literature
reviews may also be done to explore data and to develop theories from the data, (inductive approach).
Considering an inductive research approach (Saunders, M., 2009) refers to the issue in a way that is
particularly relevant to this study. It is mentioned that some studies do not commence with a defined
theoretical framework. It is exploratory in nature and a conceptual framework is developed from
data analysis during the data collection and analysis process and theory is grounded in the data.
Theory or explanation emerges as a result of the research process. The book, (Saunders, M., 2009),
do emphasise that it can be advantageous to combine these approaches in a research study.
For the proposed research methodology, an inductive research approach will be followed when data
from literature is analysed through Atlas.Ti to build a conceptual model. When this conceptual model
is tested (Delphi) the research approach changes to deductive. For the following Delphi rounds, a
new innovation management model will be built, by means of an inductive approach.
3.4. Strategy
According to (Saunders, M., 2009) research strategy is defined as the “general plan of how the
researcher will go about answering the research question(s)”. The importance of selecting the most
appropriate strategy for the research is to enable the researcher to answer the research questions
and to meet the research objectives. The research strategy choice will also be guided by the amount
of time and resources that are available, the extent of existing knowledge and the philosophical
background of the researcher. Types of strategies are not necessarily mutually exclusive.
Other than the more common research strategies like the experiment, case study, grounded theory
ethnography, action research and surveys, the Delphi technique, for data collection and analysis,
can also be considered as being a research strategy. It also relates to grounded theory in qualitative,
inductive cases. (Skinner, R., 2015).
The Delphi technique, as research strategy, is thoroughly described in the following paragraphs but
the Systematic Literature Review method is discussed first as this process will be used to inform the
input data for the Delphi exercise.
IAMOT 2019 | 8
A Research Approach for the Development of a Framework for Innovation Management
hold across multiple contexts. A third benefit is that of the creation of a deeper understanding of
the causal relationships between factors by requesting the respondents to justify their responses and
reasoning. Fourthly, the paper mentions that a Delphi study can contribute to “Construct Validity”
as the participants initial responses are validated to improve understanding of the meanings of the
concepts, questions and items. This procedure leads to a common language about the subject and
improves the definition of the construct.
Advantages of the Delphi technique listed are; (Yousuf, M., I., 2007)
●● The emergence of a representative opinion from a group of experts.
●● Suitable in cases where precise analytical techniques are not applicable and collective
subjective judgement can benefit the quality and validity of the outcome.
●● Data can be collected from experts with diverse experience and expertise and when the
expert opinions is more likely to address complex problems.
●● Anonymity and confidentiality enhance unbiased, objective feedback.
●● Cost effective as electronic communication is efficient. Costly and timely visits can be
avoided
●● The structured communication process avoids direct confrontation between experts
on strong conflicting views. This reduces group pressure and encourages sharing of
unbiased points of view. (Saunders, M., 2009)
Additional Delphi technique benefits identified by (Skinner, R., 2015):
●● The Delphi method can be used successfully in cases where there is lack of established
or imperfect knowledge or if knowledge did not converge into commonly acceptable
theory.
●● Effectively used to establish the basis for future studies.
●● Relatively easy to use.
Disadvantages of the Delphi technique to be aware of during design
●● (Yousuf, 2007, cite Linstone, H., Turoff, M., 1975), indicated that an over-specification
of the structure of such a study may cause the development of preconceived ideas of the
problem which may limit the contributions from others.
●● A false consensus may develop if participants opt to withdraw from the study if their
disagreements are ignored or not explored by the researcher and participant drop-outs
and slow response rates can hamper the process. (Moodley, R., 2018).
●● Group pressure for consensus may lead to a false consensus.
●● Consensus is based on a selected group of experts and the validity of the outcome is
influenced by the quality of the panel selection. (Moodley, R., 2018 citing Yousuf, 2007)
●● This method tends to eliminate extreme positions as consensus is normally a “middle of
the road” negotiated result.
●● Commitment from participants are crucial for success and the process can be time
consuming
●● There are no standard guidelines for the determination of consensus, sample size nor
sampling techniques
Application Criteria and Reasons for Selection
The Delphi method can be applied in the following circumstances; (Okoli, C., 2004)
IAMOT 2019 | 10
A Research Approach for the Development of a Framework for Innovation Management
●● In the case when a study is complex and knowledgeable people who understand issues
related to different disciplines, points of view and social interpretations.
●● When a group method is preferred and a panel of experts will provide the biggest
contribution especially in cases when physical meetings is impractical
●● When only a relatively small number of experts (in the order of 10 people) meet the
requirements and are practical to solicit their views.
●● In cases where not only opinions of experts are required but ranking is also needed.
A number of properties that if present, the Delphi method could be used successfully:
(Grisham, T., cite Linstone, 2002)
●● If a focus group approach is appropriate but more individuals are required than can
effectively interact on a face-to-face basis or when long duration of process and high
costs make group gatherings infeasible
●● In cases where disagreements among participants are potentially severe of politically
objectionable an anonymous application is preferable
●● The Delphi method can be applied when the heterogeneity of the expert panel needs to
be protected to enhance validity of the outcomes by avoiding domination by personality
strength or by numbers.
Delphi Application Guidelines (how to use)
The paper (Grisham, T., 2009, cite Hasson et al., 2000) proposed the following research guidelines
for designing a Delphi technique approach.
●● Pilot testing in a small group.
●● Initial questionnaire to solicit qualitative comments.
●● Initial feedback being quantitative after statistical analysis of the initial opinions.
●● Subsequent questionnaire when qualitative comments are solicited.
●● Subsequent feedback is quantitative following statistical analysis.
●● Selection process to identify expert panel members. Informing experts to explain what
the purpose of the study is, what will be done with the information and what is required
from them.
●● Data analysis focussing on the discovery of opinions. According to (Grisham 2009,
T., cite Green et al., 1999) two or three rounds are preferred and that an 80 percent
consensus should be sufficient.
●● Data analysis takes place to determine the most important issues and managing the
opinion inputs. Responses are usually analysed with analytical software. (Grisham,
T., 2009, cite Lincola, 1985), identified the criteria for qualitative studies such as the
Delphi technique as; “credibility (truthfulness), fittingness (applicability), audit ability
(consistency), and confirm ability”.
●● Presentation and interpretation. Depending on the nature of the analysis results the
presentation can be graphical, statistical or descriptive.
Panel of Experts; Structure, Selection Criteria and Selection Process
The objective of a Delphi study influences the practical consideration of which experts are most
qualified to serve as panel members. In this context an expert is defined as “any individual with
relevant knowledge and experience of a particular topic” and are people that have achieved a high
status in their professional group. (Cantrill, J., A., 1996) The paper went on to mention that widely
IAMOT 2019 | 11
Managing Technology for Inclusive and Sustainable Growth
used approaches to identify experts to serve on panels, are to make use of selection criteria based
on professional credentials and rank, or to invite relevant disciplinary groups to nominate their own
experts. It is important to select panel members who have an interest in the topic. Selection of people
knowledgeable in the field, and their commitment to multiple rounds of questions on the same topic
are essential. (Grisham, T., (2009).
Regarding panel size (Mullen, P.M., 2003) cite Linstone, 1978), stated that “a suitable minimum
panel size is seven” and that the accuracy deteriorates rapidly with smaller sizes. (Mullen, P., M., cite
(Cavalli-Sforza, 1984), that views the typical Delphi panel size is between 8 to 12 members. Others
are of the opinion that a panel size should be larger, (Mullen, P. M., cite Turoff, 1970) suggests
“anywhere from ten to fifty people” and (Mullen, P., M., cite Wild and Torgersen, 2000) which
suggest panel sizes of 300-500. The group of selected experts tends to be relatively small, between
and 10 to 30 people, preferably from the academic fraternity as well as practitioners. (Baldwin, A.,
A., 2011) states, “with a panel of 15 experts in a given field, it is highly unlikely that another equally
expert panel will produce radically different results”. The answer to what size a Delphi panel should
be is probably best reflected by (Cantrill, J., A., 1996), that reported that published studies used panel
sizes varying from 4 to 3000 and that size should be governed by the purpose of the investigation.
Another approach is to select a smaller group of key experts for participating in the early planning
phases and the increase the number of panel participants for the next phases of the study.
Delphi Method Process, Stages and Procedures
A number of variations on the process of Delphi technique are to be found in literature. A 3
round Delphi process is proposed by (Skulmoski, G.J., 2007), Figure 2: The typical three round
Delphi process.
Experience
Pilot Study
Delphi R2 Delphi R2
Design Survey & Analysis
Delphi R3 Delphi R3
Design Survey & Analysis
Research
Documentation
Verification &
Generalization
IAMOT 2019 | 12
A Research Approach for the Development of a Framework for Innovation Management
no
Identify Consensus or
Identify Espert Conduct
Research Design Survey Number of Target
Panel Survey
Questions Rounds Reached
yes
In this case, the identification of the expert panel is shown but it is done before the survey is
designed. This approach limits the communication to the panel of experts about their role when
invited to participate.
The Delphi process diagram Figure 4: Block Diagram of the Delphi Process, (Barry, M.L., 2009),
proposes that a key focus group is used to identify the factors to be verified as input into the process.
It also proposes a simultaneous process to identify the participants while a pilot questionnaire is
developed.
The paper (Skinner, R., 2015, cite Hallowell, M.R. 2010), proposed the following process steps,
categorised by three stages: the exploratory stage, the distillation stage, and the utilization stage.
During the exploratory stage, potential experts are identified, selected, based on predefined criteria
and expert status is validated and the panel is informed about the study requirements. The distillation
phase is about the development of the questionnaires, the transmittal to the experts, collection,
analysis and feedback to the panel. After sufficient consensus is reached, the results are reported
during the utilisation phase.
The proses from another paper, (Donohoe, H.M., 2009), is also divided into three main phases
namely the preparation, convergence and consensus phases. Importantly, this paper introduces
the concept of Critical Design Decisions (SDD’s) at the expert panel development step and at the
scoping phase step, to introduce comprehensive assessments.
These processes were considered as inputs towards the design of a research methodology process,
which is proposed to be used in the larger research study and discussed later in this paper.
Data Collection and Analysis
The Data collection process centres around the development and administering of questionnaires
and other data collection tools and the data that is collected. Data collection within the Delphi
process starts taking place during initial stages when dimensions, factors, criteria, or elements
of a new concept or framework are identified. An initial, smaller panel of experts can be
applied or the Systematic Literature Review process can provide these dimensions within a
conceptual framework.
IAMOT 2019 | 13
Managing Technology for Inclusive and Sustainable Growth
IAMOT 2019 | 14
A Research Approach for the Development of a Framework for Innovation Management
Data analysis is the “process of determining the most important issues”. (Grisham, T., (2009).
Analysis take place by evaluating feedback on questionnaires. The outcome of analysis is repackaged
in a following set of questionnaires for the next round. Statistical analysis can be performed to
determine the ranking outcome of data gathered.
The book, (Brady, S.R., 2015), mentioned that the thematic analysis method is widely recommended
in literature to be used for the qualitative Delphi method. The research paper, (Moodley, R., 2018),
indicates that “ATLAS.ti can be employed to perform thematic analysis to consolidate the rationale
behind the respondents’ rankings”.
The development of a Delphi questionnaire needs to reflect the same features and standards as
a typical questionnaire. It should be professionally prepared and the task instructions must be
thoroughly tested. The one-page cover letter invites and thanks the person for participating, explains
what inputs will be required and why the individual is selected for participation. It must also
explain how the questionnaire is to be completed and how the results of the Delphi will be used.
Administrative content including due dates need to be concise and clear.
4.2. Approach
For the proposed research methodology, an inductive research approach will be followed when
data from literature is analysed through Atlas.Ti to build a conceptual model. When this conceptual
model is tested (Delphi) the research approach changes to deductive. During the following Delphi
rounds, a new innovation management model will be built, by applying an inductive approach.
IAMOT 2019 | 16
A Research Approach for the Development of a Framework for Innovation Management
5. Conclusion
Literature provided theoretical data on the design of research methodologies. This data was analysed
and applied to design a research methodology for use in another study. This larger study aims to
develop an innovation management model for the (MR) industry. The context of this larger study is
well understood and was considered during the methodology design.
This paper reports on the theory of methodology development for complex studies as found in
literature. This includes the “Research Onion” approach that was used to structure the design. Other
data collection and analysis methods and procedures were also studied and described in this report.
A research methodology was designed as required and is captured in a research methodology
diagram. In summary, the methodology identifies the approach towards the research, philosophy
and paradigm and the strategy, method and time horizon follow. Then the inputs for the Delphi
technique are developed. The Delphi technique is then applied as strategy and collection and analysis
method. By applying this iterative consensus seeking technique, the innovation management model,
including its dimensions and their interrelationships are identified. The consensus outcome is then
put together in a management model for use by the industry.
Work following this study report is to finalise the ethical aspects of the larger study before the
process of applying the methodology as on the diagram can commence.
Proposed further research following this study would be to improve on the methodology and add to
detail once applied. Research is also proposed to test the application for methodology development
applications in similar industries. This research has the potential to benefit development of similar
methodologies as well as the (MR) industry is to benefit from the application of this methodology.
IAMOT 2019 | 17
Managing Technology for Inclusive and Sustainable Growth
References
Amos, T. and Pearse, N., (2008), Pragmatic Research Design: An Illustration of the Use of the Delphi Technique. The
Electronic Journal of Business Research Methods, 6(2), pp. 95–102
Baldwin, A.A., Trinkle, B.S., (2011), The Impact of XBRL: A Delphi Investigation. The International Journal of Digital
Accounting Research 11, pp. 1-24, ISSN: 1577-8517.
Barry, M.L., Steyn, H. and Brent, A.C., (2009), Determining the most important factors for sustainable energy technology
selection in Africa. South African Journal of Industrial Engineering, 20(2), pp. 33-51.
Bradley, L., Stewart, K. (2003), A Delphi study of Internet banking. Marketing Intelligence & Planning, 21(5), pp.272-281.
IAMOT 2019 | 18
A Research Approach for the Development of a Framework for Innovation Management
Brady, S.R., (2015), Utilizing and Adapting the Delphi Method for Use in Qualitative Research. International Journal of
Qualitative Methods, 1–6, Sage, DOI: 10.1177/1609406915621381.
Cantrill, J.A., Sibbald, Buetow, S., (1996), The Delphi and nominal group techniques in health services research. Int J
Pharm Pract 4, pp. 67-74.
De Haes, S. and Van Grembergen, W., (2009), An Exploratory Study into IT Governance Implementations and its
Impact on Business/IT Alignment. Information Systems Management, 26, PP. 123–137.
Delcourt, I.M., Ortimiglia, M.N., Correa, C.H., Danilevicz, A.F., (2015), A Systematic Literature Review on Firm-level
Innovation Management Systems. IAMOT 2015 Conference Proceedings, p. 1701, Cape Town.
Donohoe, H.M. and Needham, R.D., (2009), Moving Best Practice Forward: Delphi Characteristics, Advantages, Potential
Problems, and Solutions. Int. J. Tourism Res., 11, pp. 415–437, Wiley InterScience, [2 December 2008].
Easterby-Smith, M., Thorpe, Jackson, P., R., (2015), Management and Business Research, 5.
Friese, S., Soratto, J., Pires, D., (2018), Carrying out a computer-aided thematic content analysis with ATLAS.ti, MMG
Working Paper 02, ISSN 2192-2357.
Goldkuhl, G., (2012), Pragmatism vs interpretivism in qualitative information systems research. European Journal of
Information Systems, 21, 135–146.
Grisham, T., (2008), The Delphi technique: a method for testing complex and multifaceted topics. International Journal
of Managing Projects in Business, 2(1), 2009, pp. 112-130.
Hallowell, M.R. and Gambatese, J.A., (2010), Qualitative Research: Application of the Delphi Method to CEM Research.
Journal of Construction Engineering and Management, 136, 1(1) ASCE, ISSN 0733-9364/2010/1-99–107.
Leitch, C.M.F.M., Hill, Harrison, R.T., sited (Keat & Urry, 1982), 2009, The Philosophy and Practice of Interpretivist
Research in Entrepreneurship Quality, Validation, and Trust. Organizational Research Methods, 13(1),
67-84, January 2010, SAGE.
Moodley, R., (2018), Factors Influencing the Success of Cross Border Projects in African Countries; a Case Study of Ten
Projects Executed by a South African Based Company, Research Report, University of Pretoria
Mullen, P. M., (2003), Delphi: Myths and reality. Journal of Health Organization and Management, 17, pp. 37-52.
Okoli, C., Molson, J. (2004), The Delphi Method as a Research Tool: An Example, Design Considerations and
Applications. Information & Management, 42(1), pp. Pages 15–29
Orlikowski, W., Baroudi, J.J., (1990), Studying Information Technology in Organisations, Research Approaches and
Assumptions. Academy of Management, STERN IS-90-4, p. 14, Anaheim, CA, August 1988.
Saunders, M., Lewis, P., Thornhill, A., (2009), Research methods for business students fifth edition, Harlow, Pearson.
Skinner, R., Nelson, R.R., Chin, Wynne, W. and Land, L., (2015), The Delphi Method Research Strategy in Studies
of Information Systems. Communications of the Association for Information Systems, 37(2). DOI:
10.17705/1CAIS.03702, [August 2015].
Skulmoski, G.J., Hartman, F.T., Krahn, J., (2007), The Delphi Method for Graduate Research. Journal of Information
Technology Education, 6.
Tosey, P., Visser, M., Saunders, M.N.K., (2011), The origins and conceptualizations of ‘triple-loop’ learning: A
critical review. Management Learning, Vol. 43, pp. 291-307 https://doi.org/10.1177/1350507611426239
[1July, 2012].
Von der Gracht, H.A., (2012), Consensus measurement in Delphi studies: Review and implications for future quality
assurance. Technological Forecasting & Social Change 79 (2012) PP. 1525–1536.
Walliman, N., (2011), Research Methods the Basics. ISBN 0-203-83607-3 Master e-book ISBN, Oxford Taylor &
Francis e-Library.
Walwyn, D., (2018), Research methodology 800 (INI 800), Lecturing proceedings, GSTM, University of Pretoria.
Pretoria.
Yousuf, M.I., (2007), Using Experts’ Opinions Through Delphi Technique. Practical Assessment, Research &
Evaluation, 12(4), ISSN 1531-7714.
IAMOT 2019 | 19
Management of Technological Innovation in
Emerging Economies: A Conceptual Framework
Rendani Mamphiswana
University of Johannesburg, Postgraduate School of Engineering Management,
Faculty of Engineering and the Built Environment, South Africa
E-mail: rendani.mamphiswana@gmail.com
Saurabh Sinha
University of Johannesburg, Office of Deputy Vice-Chancellor: Research,
and Internationalisation, South Africa
E-mail: dvc-r@uj.ac.za
Abstract
The previous industrial revolutions took jobs away, thus the income Gini coefficient widened and impacted
emerging economies, like South Africa, even though the automation occurred in another part of the world. This is a
reflection of the interconnected nature of today’s global economy. The Fourth Industrial Revolution, characterised
by robotics and automation powered by artificial intelligence, is likely to widen both income and wealth Gini
coefficient. The introduction of robotics and automation within current business models produces the same products
faster and cheaper, and possibly with increased features or value-add to increase price–catering for the selected few,
the elite. It is predicted that this techno-economics scenario will lead to exclusive and unsustainable growth. The
Fourth Industrial Revolution cannot be left to its own devices in emerging economies, it must be carefully managed
in an attempt to achieve inclusive and sustainable growth. Left to its own devices, the Fourth Industrial Revolution
is likely to worsen unemployment, poverty and inequality in emerging economies such as South Africa. This paper
explores the development of an alternative scenario, geared towards inclusive and sustainable growth for emerging
economies. The paper proposes a conceptual framework to guide emerging economies in the successful introduction
of low cost–market creating–business models, capable of creating new and/or already existing affordable products
and employment opportunities. The objective of the proposed conceptual framework is to strategically and gradually
manage the impact of the Fourth Industrial Revolution in emerging economies, in order to achieve an inclusive
and sustainable growth. The proposed conceptual framework consist of six variables: technical knowledge; regional
partnerships; understanding of the labour environment; firm capability; temporary employment; and knowledge
transfer. The research followed a case study approach, and in relation to the wider ecosystem, the next phase of the
research will test for correlations and causality among the variables composing the proposed conceptual framework.
This paper contributes towards an improved understanding of central mechanisms for emerging economies to
manage technology and move in the direction of inclusive and sustainable growth.
Keywords: Technological Innovation, Low Cost Business Models, Emerging Economies, Industrial Revolutions,
Inclusive and Sustainable, Growth
1. Introduction
South Africa’s Gini coefficient, based on income, in 2006 and as estimated by Statistics South
Africa-was 0.8, thus making South Africa highly ranked on income inequality (Bosch, et al., 2010).
Taking into account welfare policies-social grants, free housing, free electricity for the poor–into the
equation a modified Gini coefficient of 0.59 is obtained (Bosch, et al., 2010). The Gini coefficient of
0.59 is still one of the highest in the world. Wealth and income distribution in South Africa is among
the most unequal in the world; and access to clean water, energy, education and health care remain
unsatisfactorily low (May, 1998).
In another study based on adjusted census data, South Africa’s Gini coefficient rose from 0.66 to 0.69
for the period of 1996 to 2001 (Simkins, 2004). During this period inequality in South Africa increased
by a significant margin (Simkins, 2004). In an assessment of changes in poverty and inequality in South
Africa, between 1995 and 2000, the outcome was as follows: severe and deep increase in poverty; and a
sharp rise in inequality, especially among Africans (Hoogeveen & Özler, 2005). During this period, the
IAMOT 2019 | 20
Management of Technological Innovation in Emerging Economies: A Conceptual Framework
strategy failed to achieve projected growth and create sufficient jobs to reduce the high unemployment
(Hoogeveen & Özler, 2005). However, growth is not automatically followed by a substantial reduction
in poverty; it must be coupled with strategies that bring about improvement in income and wealth
distribution (Hoogeveen & Özler, 2005; Piketty, 2017).
South Africa experienced, within the mining and agricultural sectors, a decline in demand of low
skilled and unskilled labour, leading to high unemployment (Banerjee, et al., 2006). The entrance
of African women into the labour force significantly increased supply of unskilled and low skilled
labour (Banerjee, et al., 2006). The economy of South Africa has shifted towards services, such as
financial services, leading to a demand of more skilled labour (Banerjee, et al., 2006). Though the
economy is more skilled-based, the unemployment rate for tertiary graduates increased from 6%
to 14% during the period of 1994 to 2014, and 65% of technical and vocational education training
(TVET) college graduates could not find work experience (Statistics South Africa, 2015).
South Africa saw an overall unemployment rate increase, in the period of 1994 to 2014, from 22% to
25% (Statistics South Africa, 2015). This unemployment rate was highest for black Africans at 40%
in 2014 (Statistics South Africa, 2015). In 2011, the global unemployment rate was 8%, while it was
over double and almost triple in North Africa and Sub-Saharan Africa–at 17% and 22% respectively
(Ajaegbu, 2012). In South Africa, the period from 1995 to 2011 was marked with the rise in
youth unemployment from 35% to 50%, and that stood at double the national unemployment rate
(Spaull, 2013). A number of factors influenced the current high unemployment: a mismatch between
the location of available jobs and the currently unemployed; and a mismatch between skills required
by the labour market and skills of the unemployed (Banerjee, et al., 2006).
The introduction of technology, to improve operations, in the mining and agricultural sectors
reduced the demand for unskilled and low skilled labour. Recently, the retail sector is seen to adopt
new technologies that would increase self-services. The Fourth Industrial Revolution, driven by
artificial intelligence and big data, is anticipated to automate more jobs. The airport and banks of the
future would be radically different. The adoption of the Fourth Industrial Revolution (Industry 4.0)
will worsen unemployment, poverty and inequality in emerging economies such as South Africa.
This paper proposes a conceptual framework to guide emerging economies in successful introduction
of low cost–market creating–business models, capable of creating new and/ or already existing
affordable products and employment opportunities. The objective of the proposed conceptual
framework is to strategically and gradually manage the impact of Industry 4.0 in emerging
economies, in order to achieve inclusive and sustainable economic growth.
2. Literature Study
IAMOT 2019 | 21
Managing Technology for Inclusive and Sustainable Growth
volumes; while Japan’s interest rate shifts have a more pronounce influence on Asian economies
(Montiel & Reinhart, 2001). Contagion was observed to be more regional than global–as was the
case with significant reduction in the volume of capital flow in Latin America due to the Mexican
crisis (Montiel & Reinhart, 2001). The realization of rapid economic development by emerging
economies is closely linked to the region and such suggest that policies developed ought to take a
regional outlook as a key variable. For the economic development of South Africa, stronger links
and sustainable partnerships within the Southern African Development Community (SADC) are,
therefore, essential. To state further, the successful economic development of Africa’s regional
economic bloc rests on strong intracontinental links.
India, an emerging economy, is faced with high poverty, and lack of credit access for the
poor is considered a leading cause for the inability of the poor to transition out of poverty
(Narwal & Yadav, 2014). Formal financial institutions consider it risky to provide credit to the poor.
Governments in a number of emerging economies have facilitated the emergence of microfinance
institutions, to reach out to the poor, improve the standard of living for the poor by offering
loans and technical assistance on the development of new businesses (Narwal & Yadav, 2014).
Microfinance institutions are financially sustainable, owing to economies of scale that reduce costs
(Narwal & Yadav, 2014). There are 7000 microfinance institutions worldwide, serving
a clientele of 16 million and loans of up to 2.25 billion US dollars have been issued to clients
(Narwal & Yadav, 2014).
The size and number of offices for 52 microfinance institutions in India are critical indicators for
high performance (Narwal & Yadav, 2014). The large number of microfinance offices ensures that
assistance to the poor is in their location.
IAMOT 2019 | 22
Management of Technological Innovation in Emerging Economies: A Conceptual Framework
When a firm enters the market, it adopts a technology to make products or services for its clientele.
Within the firm, the technology is in early development stages, during these stages efforts for
progress lead to relatively low improvements (Adner & Kapoor, 2016). With better understanding
of the technology, the speed of progress increases until the stage of maturity, beyond which efforts
for technology improvement lead to diminishing returns (Adner & Kapoor, 2016) . At this stage,
the technology is the dominant design within the firm. To remain competitive and relevant to its
paying customers–the clientele–the firm initiates sustaining–incremental-innovations, by adding
more features to achieve higher product and service performance (Christensen, 2016). Sustaining
innovations retain the core of the dominant technology design within the firm and does not offer new
products to the market. Phones upgrade each year–from iPhone 6 to iPhone x or from Samsung galaxy
S6 to S9–are fitting examples of sustaining innovations. Upgrades from sustaining innovations are
sold at higher and higher prices to meet firms’ yearly revenue and profit targets (Christensen, 2016).
An alternative to achieving higher firm performance–profit-is to reduce cost. Profit is revenue
generated minus cost incurred to make products and/or services and reinvestment for business
sustainability. Investments in information technology led to higher productivity and organizational
transformation due to the development of new business processes, work practices, cost reduction
and increase in output (Brynjolfsson & Hitt, 2000). To lower operating costs in the longer period,
automation of routine work tasks is considered. Automation of jobs is anticipated to trigger rising
inequality as a key challenge for the future and would require adequate retraining for traditionally
qualified workers (Arntz, et al., 2016). To keep the socioeconomic system in equilibrium, the rate
of retraining must be higher than the rate of job losses to automation and robotics. The next section
expands on Industry 4.0 and its impact.
IAMOT 2019 | 23
Managing Technology for Inclusive and Sustainable Growth
In a survey of just 2000 technology experts, half anticipate a future where a significant number
of blue and white collar workers will be replaced by robots, leading to increase in inequality
(Smith & Anderson, 2014). The other half anticipate industry 4.0 to follow with previous industrial
revolutions in creating more jobs than it destroys (Smith & Anderson, 2014). Highly skilled
workers are anticipated to adapt into new work environments (Smith & Anderson, 2014). It is also
estimated that job losses in other sectors could be absorbed in other sectors–be it existing or new
(Acemoglu & Restrepo, 2017). The future of work is anticipated to be self-employment and ad hoc
online work opportunities (Millington, 2017).
The Mckinsey & Company report suggests that it is the activities within an occupation that would
be automated in the short term, not the entire job (Chui, et al., 2015). Therefore, jobs will be
redefined, similar to the ATM on the bank teller’s job (Chui, et al., 2015). In the US, as much
as 45% of activities within an occupation can be automated with current technologies and these
activities amount to 2 trillion US dollars of annual wages (Chui, et al., 2015). Advances in artificial
intelligence, in particular machine learning, would lead to a further 13% of activities that could be
automated (Chui, et al., 2015). Introduction of new business processes could allow the workforce
to execute higher value work, such as more face-to-face time with customers by sales teams
(Chui, et al., 2015).
Industry 4.0 is here and the way forward is new economic models that alter the ownership of the
means of production to achieve equitable income and wealth distribution (Marwala & Nkomfe, 2016).
To achieve sustainable and inclusive growth during industry 4.0, emerging economies must create
jobs for the low skilled and unskilled labour force. The pace of reskilling and upskilling might not
be fast enough to enable the entire workforce to access higher end jobs. The reskilling and upskilling
would be positioned as a long term strategy–for higher end jobs. With the trend towards information
communication technology (ICT) intensive jobs, employers in Africa identify inadequately skilled
workforces as a bottleneck to business operation and its success (World Economic Forum, 2017).
Essential skills for industry 4.0 are technological, critical thinking, socioemotional, higher order
cognitive, and interpersonal (World Development Report, 2018).
Industrial revolutions brought about an era where progress in innovation and technology emerged
as central variables for economic growth and performance (Meisenzahl & Mokyr, 2011). In an
attempt to develop an understanding of key variables in responding to industry 4.0; the next section
will review how technological innovation was managed, both at firm and national level, during
previous industrial revolutions and now during the early stages of Industry 4.0. Key variables
to enable emerging economies to successfully manage the introduction of low cost–market
creating-business models as the overarching strategy for industry 4.0 will be extracted.
IAMOT 2019 | 24
Management of Technological Innovation in Emerging Economies: A Conceptual Framework
when coupled with dynamics within Britain brought about industry 1.0 (O’Brien, 2006). Some of the
internal dynamics argued to have favoured Britain are higher wages and extremely low energy prices,
this scenario might have forced British firms to aggressively search for new production technologies
to replace labour (Allen, 2011). Higher wages also served as an encouragement for the British people
to gain further education and training, and this understanding enabled the development of more new
technologies (Allen, 2011). Therefore, early technologies during industry 1.0 were expensive; other
countries could not afford them, and this could have attributed to low productivity rates in Britain
(Antras & Voth, 2003; Allen, 2011).
Success in advancing the economy in pre industrial revolutions era was linked to large populations, on
this basis industry 1.0 should have taken place in China or India (Lin, 1995). However, to advance an
economy through great technological and scientific progress required more than a large population,
relevant education and training are key drivers–for both the development of new technologies and
adaptation of existing, for local settings, technologies (Lin, 1995).
IAMOT 2019 | 25
Managing Technology for Inclusive and Sustainable Growth
unemployment rates are observed as firms struggle to keep operations online (Rifkin, 2012). Thus the
leading firms are struggling to keep up. Sustainable development, leveraging a decentralized approach
in renewable energy systems and 3D printing for advance manufacturing could be the way forward
(Rifkin, 2012; Jovane, et al., 2008). A move towards a decentralization form of production has the
potential to introduce new owners of production–the poor and currently marginalized.
As most technologies are developed outside of emerging economies, available at much lower prices;
emerging economies are in a position to access these technologies for local use, however, a strong
internal research and scientific capacity for adaption, to cater for local settings, is a prerequisite for
successful commercialization (Lin, 1995). The kind of firms suitable for emerging economies are those
with superior capacity to merge and extract value from a number of technologies (Florida, 1991).
3. Proposed Framework
IAMOT 2019 | 26
Management of Technological Innovation in Emerging Economies: A Conceptual Framework
knock a firm with a superior technology (Chesbrough, 2007; Echterfeld, et al., 2015). The wide use of
internet and advances in ICT–i.e. big data-has opened a new world of electronic (e) commerce business
models, creating more options for customers (Timmers, 1998; Teece, 2010; Kiel, 2017). Amazon is
one business leveraging e-commerce as a business model. New and disruptive technologies are threats
to incumbent firms, however, entry firms would only disrupt incumbent firms provided that they make
use of superior business models (Echterfeld, et al., 2015).
To offer sustainable strategic edge, a business model must be almost impossible to copy by
competing firms (Teece, 2010) and should be timeously implemented. The advantage of low
cost–market creating–business models, offering accessible and cheaper products, is that
that the initial margins are too low for larger firms–thus rendering them unattractive
(Christensen, et al., 2016). Also, cheaper and accessible products directed to those unable–the poor-to
purchase mainstream expensive products creates a scenario where firms delivering the products compete
against nothing (Christensen, et al., 2016). This sector of the economy inevitably provides a platform
for the firm to make incremental product improvements without being recognized by larger firms
(Christensen, et al., 2017). The firm starts to offer products to the low end of the market, with product
improvements they begin to access other consumers higher up the market hierarchy. Involving and
integrating customers, during product development, as key partners is central in strengthening the
selected business model (Kiel, et al., 2016).
Low cost business models are transformative, capable of shifting the balance of forces–access to
affordable products and employment opportunities within an economy, and actually begin to expand
the economy by creating new markets (Christensen, et al., 2017; Florén & Agostini, 2015).
In an attempt to reduce current high income and wealth Gini coefficients and for economic
sustainability, South Africa considered small, medium, micro enterprises (SMMEs) as key enablers
(Fatoki, 2014; Mbuyisa & Leonard, 2015). A number of government agencies and ministries
have SMMEs development as a top mandate. SMMEs create the majority of jobs in South Africa,
currently at 55% (Van Scheers, 2011). Despite all the efforts and focus on SMMEs, the failure rate of
entry SMMEs is extremely high–4 in 10 in the first year, 6 in 10 within two years, and 9 in 10 within
10 years (Fatoki, 2014; Van Scheers, 2011). A number of factors are cited for the high failure rate,
ranging from lack of skills in marketing the business, high competition, non-existent distribution
channels and lack of workforce training (Fatoki, 2014; Van Scheers, 2011).
The adoption of ICT is a potential strategy for SMMEs to correctly response to some of the outlined
challenges (Mbuyisa & Leonard, 2015). The success of low cost business models would certainly
rest on correct management of identified challenges faced by SMMEs.
IAMOT 2019 | 27
Managing Technology for Inclusive and Sustainable Growth
Figure 1: Proposed Conceptual Framework for Emerging Economies. The Framework Should be Contextualised within
the wider Ecosystem Including that of Government, Related Policy Environment and Red-tape.
In relation to the wider ecosystem, the next phase of the research will test for correlations and
causality among the variables composing the proposed conceptual framework.
7. Research Methodology
From the literature study on industrial revolutions, a few variables were deduced for successful
management of technological innovations (Perry, 1998). As each industrial revolution and country is
unique in its own way, these variables act as a guide and starting point to identify suitable variables
for emerging economies to successfully manage technological innovations in the era of Industry
4.0. The development of the proposed conceptual framework is a step within the process of theory
building. In theory building, both deduction and induction are used in combination (Perry, 1998).
When correlations and causality among variables are central to research, the research is categorised
as quantitative (Golafshani, 2003; Noor, 2008).
A case study research methodology is suitable for research involving dynamics and complexities
(Perry, 1998; Noor, 2008). When research involves integrated systems during an era of rapid change,
a case study approach is recommended (Noor, 2008). Through a diverse range of data sources, a
case study helps surface reasons for the way things are and guides the development of relationships
among concerned variables (Noor, 2008). Understanding dynamics within an emerging economy is
a multifaceted and complex process. On this basis, a case study research methodology was followed.
The development of the proposed conceptual framework, using case studies, followed an explorative
route (Florén & Agostini, 2015; Noor, 2008). Multiple case studies, in this paper the management
of new technologies during industry 1.0 to 4.0, strengthen reliability, validity and accuracy of the
research output (Noor, 2008).
IAMOT 2019 | 28
Management of Technological Innovation in Emerging Economies: A Conceptual Framework
For the next phase of the research, economies with above average economic growth would form part
of the initial case study pool. Multiple cases, in the next phase of this study the number of selected
countries, would strengthen reliability, validity and accuracy of the research output (Noor, 2008).
Data sources such as published national statistics, budget speeches and recorded interviews will be
used to test for correlations among variables of the proposed conceptual framework. The flexibility
that comes with semi structured interviews increases the richness–diverse angles of gathering data on
a single research-of the collected data (Noor, 2008). Where correlations among variables hold, face to
face and/or online semi structured interviews would be conducted to gather data for causality testing.
The output of the next phase of the research project would, also, outline applicable boundaries and
circumstances for the new and proposed theory. It is these applicable boundaries and circumstances
that would guide policy makers in emerging economies in the development of suitable policy
constructs and intents.
8. Conclusion
In an attempt to guide emerging economies in accurately responding to Industry 4.0 and to achieve
inclusive and sustainable growth, this paper proposes a conceptual framework. The conceptual
framework has six variables-technical knowledge; regional partnerships; understanding of the
labour environment; firm capability; temporary employment and knowledge transfer–that are
considered for successful introduction of low cost–market creating–business models. These new
business models and requisite ecosystem will be geared towards creating affordable products and
employment opportunities. The research followed a case study approach and in relation to the wider
ecosystem, the next phase of the research will test for correlations and causality among the variables
composing the proposed conceptual framework.
References
Acemoglu, D. & Restrepo, P., 2017. Robots and jobs: Evidence from US labor markets, s.l.: s.n.
Adner, R. & Kapoor, R., 2016. Innovation ecosystems and the pace of substitution: Re‐examining technology S‐curves.
Strategic Management Journal, 37(4), pp. 625-648.
Ajaegbu, O.O., 2012. Rising Youth Unemployment and Violent Crime in Nigeria. American Journal of Social Issues &
Humanities, 2(5), pp. 315-321.
Allen, R.C., 2011. Why the industrial revolution was British: commerce, induced invention, and the scientific revolution.
The Economic History Review, 64(2), pp. 357-384.
Antras, P. & Voth, H. J., 2003. Factor prices and productivity growth during the British industrial revolution. Explorations
in Economic history, 40(1), pp. 52-77.
Arntz, M., Gregory, T. & Zierahn, U., 2016. The risk of automation for jobs in OECD countries, Paris: OECD Publishing.
Atkeson, A. & Kehoe, P., 2001. The transition to a new economy after the second industrial revolution, Cambridge:
National Bureau of Economic Research.
Banerjee, A. et al., 2006. Why Has Unemployment Risen in the New South Africa?, Ann Arbor: University of Michigen.
Bosch, A., Rossouw, J., Claassens, T. & du Plessis, B., 2010. A Second look at measuring inequality in South Africa: A
modified Gini coefficient, Durban: University of Kwazulu Natal.
Brynjolfsson, E. & Hitt, L.M., 2000. Beyond computation: Information technology, organizational transformation and
business performance. ournal of Economic perspectives, 14(4), pp. 23-48.
Butler, S., 2018. The Guardian. [Online] Available at: https://www.theguardian.com/technology/2018/oct/18/amazon-
creates-600-technology-jobs-in-manchester
[Accessed 17 November 2018].
Chandler, A.D., 1992. Organizational capabilities and the economic history of the industrial enterprise. Journal of
economic perspectives, 6(3), pp. 79-100.
Chesbrough, H., 2007. Business model innovation: it’s not just about technology anymore. Strategy & leadership, 35(6),
pp. 12-17.
Christensen, C., 2016. The innovator’s dilemma. 3rd ed. Boston: Havard Business School Publishing.
Christensen, C.M., Grossman, J.H. & Hwang, J., 2017. The Innovator’s Prescription. New York: Mc Graw Hill
Education.
IAMOT 2019 | 29
Managing Technology for Inclusive and Sustainable Growth
Christensen, C. M., Hall, T., Dillon, K. & Duncan, D.S., 2016. Competing against luck. 1st ed. New York: HarperCollins
Publishers.
Christensen, C.M., Horn, M.B. & Johnson, 2017. Disrupting Class. 3rd ed. New York: McGraw Hill Education.
Chui, M., Manyika, J. & Miremadi, M., 2015. Four fundamentals of workplace automation. McKinsey Quarterly, 29(3),
pp. 1-9.
Colombo, A.W. et al., 2017. Industrial Cyberphysical Systems: A Backbone of the Fourth Industrial Revolution. IEEE
Industrial Electronics Magazine, 11(1).
Cortimiglia, M.N. et al., 2015. A systematic literature review on firm-level innovation management systems. Cape Town,
International Association for Management of Technology, pp. 1698-1713.
Crafts, N.F., 1977. Industrial Revolution in England and France: some thoughts on the question,“Why was England
first?”. The Economic History Review, 30(3), pp. 429-441.
Drath, R. & Horch, A., 2014. Industrie 4.0: Hit or Hype?. IEEE industrial electronics magazine, pp. 56-58.
Echterfeld, J., Amshoff, B. & Gausemeier, J., 2015. How to use business model patterns for exploiting disruptive
technologies. Cape Town, International Association for Management of Technology, pp. 2294-2313.
Fatoki, O., 2014. The causes of the failure of new small and medium enterprises in South Africa. Mediterranean Journal
of Social Sciences, 5(20), p. 922.
Florén, H. & Agostini, A., 2015. The Business Model Innovation Map: A Framework for Analyzing Business Model
Innovation. Cape Town, In 24th IAMOT Conference.
Florida, R., 1991. The new industrial revolution. Futures, 23(6), pp. 559-576.
Frey, C.B. & Osborne, M., 2013. The future of employment: How susceptible are jobs to computerisation , Oxford:
Oxford Martin Programme.
Golafshani, N., 2003. Understanding reliability and validity in qualitative research. The qualitative report, 8(4),
pp. 597-606.
Greenwood, J. & Jovanovic, B., 1999. The information-technology revolution and the stock market. American Economic
Review, 89(2), pp. 116-122.
Hoogeveen, J.G. & Özler, B., 2005. Not Separate, Not Equal: Poverty and Inequality in Post-Apartheid South Africa,
Washington: William Davidson Institute.
Hoskisson, R.E., Eden, L., Ming Lau, C. & Wright, M., 2000. Strategy in Emerging Economies. Academy of Management,
43(3), pp. 249-267.
Hsieh, C., 2002. What explains the industrial revolution in East Asia? Evidence from the factor markets. American
Economic Review, 92(3), pp. 502-526.
Jensen, M., 1993. The Modern Industrial Revolution, Exit, and the failure of Internal Control Systems. The Journal of
Finance, XLVIII(3), pp. 831-880.
Jovane, F. et al., 2008. The incoming global technological and industrial revolution towards competitive sustainable
manufacturing. Cirp Annals, 57(2), pp. 641-659.
Kiel, D., 2017. What do we know about “Industry 4.0” so far?. Vienna, International Association for Management of
Technology.
Kiel, D., Arnold, C., Collisi, M. & Voigt, K., 2016. The impact of the industrial internet of things on established business
models.. Florida, International association for management of technology.
Korhonen, M., 2018. Africa Check. [Online] Available at: https://africacheck.org/factsheets/factsheet-wealth-south-africa/
[Accessed 3 November 2018].
Lamoreaux, N.R., Levenstein, M. & Sokoloff, K.L., 2004. Financing invention during the second industrial revolution:
Cleveland, Ohio, 1870-1920, Cambridge: National Bureau of Economic Research.
Lin, J. Y., 1995. The Needham puzzle: why the industrial revolution did not originate in China. Economic development
and cultural change, 42(3), pp. 269-292.
Long, H., 2018. The Washington Post. [Online] Available at: https://www.washingtonpost.com/business/economy/
amazons-15-minimum-wage-doesnt-end-debate-over-whether-its-creating-good-jobs/2018/10/05/
b1da23a0-c802-11e8-9b1c-a90f1daae309_story.html?noredirect=on&utm_term=.4b86f70940bb
[Accessed 17 November 2018].
Marwala, L. & Nkomfe, M., 2016. The Fourth Industrial Revolution and the case of equitable income distribution. The
Thinker, Volume 68, pp. 54-56.
May, J., 1998. Poverty and inequality in South Africa, Durban: University of KwaZulu Natal.
Mbuyisa, B. & Leonard, A., 2015. ICT adoption in SMEs for the alleviation of poverty. Cape Town, International
Association for Management of Technology.
IAMOT 2019 | 30
Management of Technological Innovation in Emerging Economies: A Conceptual Framework
Meisenzahl, R.R. & Mokyr, J., 2011. The rate and direction of invention in the British industrial revolution: Incentives
and institutions. In: The rate and direction of inventive activity revisited. s.l.:University of Chicago Press,
pp. 443-479.
Millington, K.A., 2017. How changes in technology and automation will affect the labour market in Africa, London:
Helpdesk Report.
Mokyr, J., 1974. The industrial revolution in the low countries in the first half of the nineteenth century: a comparative
case study. The Journal of Economic History, 34(2), pp. 365-391.
Mokyr, J., 1998. The second industrial revolution, 1870-1914. Storia dell’economia Mondiale, pp. 219-245.
Molina, B., 2017. USA Today. [Online] Available at: https://www.usatoday.com/story/tech/news/2017/01/12/amazon-
says-create-100000-jobs-us-2018/96482672/ [Accessed 17 November 2018].
Montiel, P. & Reinhart, C., 2001. The dynamics of capital movements to emerging economies during the 1990s.
Short-term capital flows and economic crises, pp. 3-28.
Narwal, K.P. & Yadav, M.K., 2014. Impact of characteristics on outreach and profitability of microfinance institution in
India. International Journal of Financial Management, 4(3), pp. 50-57.
Neumeyer, P.A. & Perri, F., 2005. Business cycles in emerging economies: the role of interest rates. Journal of monetary
Economics, 52(2), pp. 345-380.
Noor, K.B.M., 2008. Case study: A strategic research methodology. American journal of applied sciences, 5(11), pp.
1602-1604.
Nuvolari, A., 2004. Collective invention during the British Industrial Revolution: the case of the Cornish pumping
engine, Eindhoven: Eindhoven University of Technology.
O’Connor, S., 2013. Amazon unpacked. Financial Times, Volume 8.
O’Brian, C., 2018. The Irish Times. [Online] Available at: https://www.irishtimes.com/business/technology/amazon-
web-services-to-create-1-000-jobs-in-ireland-1.3534652 [Accessed 17 November 2018].
O’Brien, P., 2006. Provincializing the first industrial revolution, s.l.: s.n.
Perry, C., 1998. Processes of a case study methodology for postgraduate research in marketing. European journal of
marketing, 32(9/10), pp. 785-802.
Piketty, T., 2017. Capital in the Twenty-first Century. 2nd ed. Cambridge: The Belknap Press of Havard University Press.
Rifkin, J., 2012. The third industrial revolution: How the internet, green electricity, and 3-d printing are ushering in a
sustainable era of distributed capitalism. World Financial Review, Volume 1.
Rooney, D., 1997. A contextualising, socio-technical definition of technology: learning from Ancient Greece and
Foucault. Prometheus, 15(3), pp. 399-407.
Schoeman, W., Moore, R., Seedat, Y. & Chen, J.Y., 2017. Artificial Intelligence: Is South Africa ready?, Pretoria:
Gordon Insititute of Business Science (GIBS).
Simkins, C., 2004. What happened to the distribution of income in South Africa between 1995 and 2001?, Johannesburg:
University of Witwatersrand.
Smith, A. & Anderson, J., 2014. AI, Robotics, and the Future of Jobs. Pew Research Center, Volume 6.
Spaull, N., 2013. South Africa’s Education Crisis: The quality of education in South Africa 1994-2011 , Johannesburg:
Centre of Development Studies.
Statistics South Africa, 2015. Employment, unemployment, skills and economic growth, Pretoria: Statistics South Africa.
Sutthiphisal, D., 2006. Learning-by-producing and the geographic links between invention and production: experience
from the second industrial revolution. The Journal of Economic History, 66(4), pp. 992-1025.
Teece, D.J., 2010. Business models, business strategy and innovation. Long range planning, 43(2-3), pp. 172-194.
Timmers, P., 1998. Business models for electronic markets. Electronic markets, 8(2), pp. 3-8.
Van Scheers, L., 2011. SMEs’ marketing skills challenges in South Africa. African Journal of Business Management,
5(13), pp. 5048-5056.
World Development Report, 2018. Technology is changing the world of work: What does that mean for learning?,
Washington: World Bank.
World Economic Forum, 2017. The Future of Jobs and Skills in Africa, Geneva: WEF.
Yuk, P.K., 2018. Financial Times. [Online] Available at: https://www.ft.com/content/e6011e6a-69a5-11e8-8cf3-
0c230fa67aec [Accessed 17 November 2018].
IAMOT 2019 | 31
The Conceptual Structure for Developing Reverse
Innovation with Virtual R & D and IOT—
Case Study in Iranian Company
Asghar Jabalbarezisarbijan
Qeshm Voltage Company, Iran
E-mail: b.barezi@gmail.com
Hossein Khalatbary
Qeshm Voltage Company, Collaborative
R&D & Scientific Committee, Iran
E-mail: khalatbary.h@gmail.com
Mojgan Talebi
Qeshm Voltage Company,
R&D & Scientific Committee, Iran
E-mail: m.talebi@qeshmvoltage.com
Abstract
In today’s world we are facing a lot of challenges in different industries. Owners of companies or their managers
should try to use solutions that is more useful for develop better products and expand their market in our
competitive world. Big companies find new ways such as reverse innovation. For example GE that is a big company
used reverse innovation to expand the market in the field of healthcare equipment. This is the way that we are
working in our company. We are following new technologies in the world and use innovation and creativity to find
new solutions to develop new products and give better services to our customers.
In our latest researches and studies, we focused on reverse innovation that is used in various fields by different
companies around the world. We found there is some challenges and difficulties in the way to use reverse
innovation with its normal procedures. We study about different solutions and finally decide to use virtual R&D and
IoT as two helping hand for the base of reverse innovation. As we tried this solution in our products, so we decide
to publish it as a conceptual structure for developing reverse innovation. In the other words, we can imagine this
concept as an isosceles triangle. The base of the triangle is reverse innovation and its two legs assumed as virtual
R&D and IOT.
Virtual R&D and Internet of things (IOT) have an important role in the age of industry 4.0. We had deep studies
about these topics and also we had publish the results in past IAMOT conferences. We use our researches results
and new solutions in our products such as training equipment and softwares.
According to our findings, using virtual R&D and IoT can be so much helpful for developing reverse innovation.
This idea has a lot of benefits and can reduce the costs and time in the reverse innovation procedures. Because in the
reverse innovation process we need to share informations between two or more countries that at least one of them is
a developing country and other is a developed country. In this paper we will try to describe our concept to share it
with others and also receive its feedback from the bigger environment. Based on our findings our concept can help
to develop products that is so much more useful in the global market. It means both of the developing countries and
developed countries can take advantages of this products.
Keywords: Reverse Innovation, Virtual R&D, IOT, Concept, Industry 4.0, Internet of Things, Developing Countries,
Developed Countries, Iran, Qeshm Voltage
1. INTRODUCTION
From the past, innovation in the companies determined the level of development and power of
competition of them. Changes in environment of companies and customers’ needs is increased the
importance of innovation in corporations in different industries.
IAMOT 2019 | 32
The Conceptual Structure for Developing Reverse Innovation with Virtual R & D
Innovation is related to some concepts such as providing new ideas, rationality, improvement,
update & invention.
From lexical point of view the term of „innovation” is taken from Latin word “innovatio”, that its
meaning is „to renew”, also in the economic discussions it’s about implementing new technologies,
creating new organizations, and institutions (Encyklopedia PWN). According to J.A. Schumpeter
(1934) who is pioneer of innovation in economic sciences, innovation and the creative destruction
activities are common practice, which allows to overcome the obstacles emerging in the cyclical
development of the economy. Creative destruction involves the continuous destruction of old
structures and creation of new ones that are more effective. In Schumpeter’s classical approach,
innovation that will cause development can be divided to these topics:
●● Releasing a new or updated product to the market
●● Using a new production method or new technique for sales operation
●● Entering to a new market
●● Using new sources of raw materials or products
●● Introducing new organization for an industry
The Schumpeter’s approach mainly consider innovation as experiments and wide-range changes in
the market that fundamentally changes the structure of entire markets or sectors.
Over the years, the innovation influence has grown due to changes in the global economy, which
has helped companies through a variety of factors, such as trade liberalization, finding new ways to
send products, deliver services, capital, and share technologies to reach to better performance and
better results. According to the Oslo Manual (2005, p. 46), the popular and most used definition
of innovation is: “an innovation is the implementation of a new or significantly improved product
(good or service), or process, a new marketing method, or a new organizational method in business
practices, workplace organisation or external relations”. According to this definition, other types of
innovation can be achieved, such as: product innovation, process innovation, marketing innovation
and enterprise innovation. In the other words, innovation is the result of human ingenuity, ability to
discover and formulate laws, principles, rules, concepts, solutions and ideas as well as to realize and
popularize them. (Duraj & Papiernik-Wojdera, 2010)
Usually, innovation happen in the enterprises that are placed in developed countries. These
enterprises have good capital and knowledge to establish R&D centres and technology centres to
create new things with innovation. And they can use global market opportunities to enter to the new
markets all over the world, including less developed and developing countries.
2. VIRTUAL R & D
As entrance of technology to market is increases, the challenges and competition in the market become
harder. One essential strategy for preservation and perfection of companies is paying more attention
to R&D and use new technologies such as professional social networks, search engines, websites
and many applications. This huge virtual space services can changing R&D to virtual R&D. Virtual
R&D will be a new way for SMEs that focusing on new product, sciences, technology, new product
development (NDP)and open innovation by utilizing cyber systems as we described before in a full
paper in IAMOT 2015. Here we selected some important parts and suggest to refer to full version.
With advantages of cyberspace, R&D can grow faster and some of the tradition R&D structures
problems will be solved. This is why we introduced cyber systems as tools of new structure of R&D
that means Virtual R&D as represented in this figure.
IAMOT 2019 | 33
Managing Technology for Inclusive and Sustainable Growth
Endo Pharmaceuticals is one company which has already expanded into virtual R&D, implementing
its new capabilities in early and late stages of the drug development process, in an attempt to combine
strong quality and oversight with international expertise. The executive vice president for research
and development at Endo Pharmaceuticals, explained “Their virtual R&D team now includes
in‐house experts in the United States and partners in India with specific capabilities who work together
toward research goals. Endo has biochemists and other scientists working in our U.S. location, but
we use research labs in India and have up to 80 people working there full time under contract, plus
dozens more providing support services in their labs. This model saves us development time as well
as significant capital costs–it would cost almost four times as much to operate an equivalent R&D
program entirely in the US.”
Commenting on the advantages of the company’s current system, he added: “Not only does this
increase our chances of achieving commercialization of new drug treatments, it gives us the option of
shutting down programs that are not able to advance to the next level, and quickly shifting resources
to accelerating the programs that are demonstrating the most promising results.”
IAMOT 2019 | 34
The Conceptual Structure for Developing Reverse Innovation with Virtual R & D
Internet of Things (IOT) is a collection of computer systems, mechanical and digital machines,
objects, humans or animals that have unique identifiers and the ability to transfer data to a network
without human intervention. An object on the Internet of things can be a person with an implantation
of a heart monitoring system, an animal equipped with a biological transmitter on the farm, a vehicle
equipped with sensors and communication systems or any natural or man-made object that can
transfer information over a network with specified address.
The fourth industrial revolution, or Industry 4.0, is a term that includes a set of strategic initiatives
aimed at helping to develop and accept the Internet of things (IOT) in the industry. The main idea in
the fourth industrial revolution is that the Internet of industrial things and technology of calculating
cloud computing are key elements in smart factories and leading the fourth industrial revolution
(after the previous revolutions, the use of steam & mechanization, mass production, and then
digitization and automation in the industry).
IAMOT 2019 | 35
Managing Technology for Inclusive and Sustainable Growth
Today, IOT is very popular in smart homes. Digital home appliances and devices are equipped with
communication capabilities such as IOT. The use of IoT capabilities in power boards used in building
management systems (BMS) helps builders and building managers increase their energy savings and
reliability in existing or under construction buildings. Most electrical equipment makers of smart
buildings, produce electrical panels that help to analyse energy consumption and cost optimization.
For example, by using advanced products from high-tech companies such as Siemens and Schneider,
intelligent electrical panels automatically monitor the energy consumption of different parts and
provide a clear view of how and where energy is used in different parts of the buildings.
In the other section, using the Internet of things is increasing in electrical panels in different
industries. When everything in the electrical systems is interconnected, the availability of the system
and its components becomes more important than ever. In the worst case scenario, if only one piece
of the product line’s production process gets in trouble, the whole system may be damaged and stop
the overall production process. Therefore, power distribution systems in factories and workshops
should be combined with maximum safety and maximum flexibility in industrial automation systems
and the Internet of things systems. IOT capable products can protect the cables, equipment, and
industrial systems against electric shock and damages, and, in the event of problems such as short
circuit and overcurrent, the power is cut off securely. In addition, the new models of this product,
combined with new features, will make it much easier to use other applications such as energy data
registration. Thus, products like this will help to create transparency about energy consumption
and system status, which are among the most important issues in the era of the fourth industrial
revolution, providing some kind of infrastructure for the production process efficiently and securely.
IAMOT 2019 | 36
The Conceptual Structure for Developing Reverse Innovation with Virtual R & D
6. Reverse innovation
Nowadays, Innovation is a key point in the business world and usually it will cause introduce
a new product in developed countries, because their power to spending money for research and
development and give value to the ideas. As we can see, most of the high-tech products introduce
in developed countries, first and then release to the global market including developing countries.
But, in recent years, we are seeing that innovation is not only limited to developed countries.
Currently, the corporations in developing countries are also pay more attention to innovation and
want to introduce their products and services to the world. This is the concept of reverse innovation
that is growing in our age. This concept is invented by Vijay Govindarajan, a world expert on
strategy and innovation in 2009. Reverse Innovation is a strategy for innovation happen in developing
countries and markets and then expand the market of an innovation’s results in developed countries
markets. A lot of companies are doing this process in developing countries like China and India
and then distributing the products globally. In the reverse innovation, process begins by focusing
on requirements in developing countries like India that needs low-cost products. After products are
developed, they will introduce their products to other areas including highly developed countries with
low prices which creates new markets. Some of developing countries have low cost and huge pool
of human and natural resources in beside the fast pace of internationalization in the world economy,
slowing down of rich countries and rising level of income and growth in emerging countries. So, the
reverse innovation process has so many benefits for both developing countries as well as developed
countries and help to produce new products with cheaper prices, rise the employment rate, growing
technology etc.
In the normal situations, the products will release in developed countries and after that the producers
will remove some expensive options and features and release the simpler product to the developing
countries. In this approach, mostly the affluent segments of society can benefit from the products
in the developing countries. But in the reverse innovation, situation is so much better. Because the
product is developed on the base of wider range of requirements in the developing countries and also
after the good results, can be used in developed countries with some upgrades.
Reverse innovation played an important role in global health systems. Because low-income
societies, need more health problems and also they cannot pay so much money for health care
systems and skilled operators. So we can see some health care products from big companies like
GE that developed a new product with help of reverse innovation that can be used in developing
countries and also developed countries. We can find different examples of reverse innovation in
different industries, such as:
●● GE Healthcare produced an ultra-portable electrocardiograph machine for doctors in India
and China and later they are selling this machine in the U.S. and other developed societies.
●● Nokia is testing new business models for classified ads in Kenya and created new
features for US users based on experiences in Ghana.
●● Microsoft is creating new phone app services for “dumb” phones to use non-smartphone
devices for access Web sites such as Twitter and Facebook.
●● Tata Motors is upgrading its “Tata Nano” for western markets with the name of
“Tata Europa”.
●● Procter & Gamble is releasing a honey-based cold remedy in Europe and the United
States markets that first was created for Mexico.
●● Nestlé introduced its low-cost, low-fat dried noodles as a healthy alternative in Australia
and New Zealand that originally created for rural areas in India.
And also recently we saw a Bangladeshi doctor who turned a shampoo bottle into a low-cost lifesaver
to save babies from pneumonia (Aamir Rafiq Peerzada and Pauline Mason Innovators, Bangladesh,
10 October 2017, BBC news).
IAMOT 2019 | 37
Managing Technology for Inclusive and Sustainable Growth
“It was my first night as an intern and three children died before my eyes. I felt so helpless that I cried.”
In 1996, Dr Mohammod Jobayer Chisti was working in the paediatric department of the Sylhet
Medical College Hospital in Bangladesh. That evening he made a promise that he would do
something to stop children dying from pneumonia. Because in his first night as an intern and three
children died before his eyes.
About 920,000 babies and small children die from the disease each year, mostly in South Asia and
Sub-Saharan Africa. After two decades of research, Dr Chisti has now come up with a low-cost
device with the potential to save thousands of babies’ lives.
Pneumonia affects the lungs after infections from bacteria like streptococcus (strep throat) or a virus
such as respiratory syncytial virus (RSV). The lungs become swollen and fill with fluid or pus,
reducing their ability to take in oxygen. In developed countries hospitals use expensive ventilator
machines to help children with pneumonia to breathe. But each machine can cost up to $15,000
(£11,000) and must be operated by specially trained staff which can make them too expensive
for hospitals in developing countries such as Bangladesh. The World Health Organisation’s
recommended low-cost alternative treatment for severe pneumonia - low-flow oxygen - still results
in one in seven children dying.
Figure 4: Dr. Christi and his Bubble CPAP Device in the Hospital
Dr Christi got his inspiration from a machine he saw while working in Melbourne, Australia.
This uses continuous positive airway pressure (CPAP) to prevent the lungs from collapsing, helping
the body to absorb enough oxygen. But it is expensive. When he returned to work at the International
Centre for Diarrhoeal Disease Research, Bangladesh, he started work on a simpler, cheaper bubble
CPAP device. He and a colleague took a discarded plastic shampoo bottle from the intensive care
unit, filled it with water and inserted one end of some plastic supply tubing. “The children inhale
oxygen from a tank and exhale through a tube which is inserted into a bottle of water producing
bubbles in the water,” Dr Chisti explains. The pressure from the bubbles keeps the small air sacs of
the lungs open. “We tested it on four or five patients at random. We saw a significant improvement
within a few hours.” After a two year study, Dr Chisti published the results in The Lancet magazine.
It showed children treated with the bubble CPAP device had much lower death rates compared with
those treated with low-flow oxygen. At a cost of just $1.25 (£1), the device appeared to cut mortality
rates by 75%.
The device also makes much more efficient use of oxygen, slashing the hospital’s annual oxygen bill
from $30,000 (£23,000) to just $6,000 (£4,600).
So far, about 600 children have benefited from the low-cost life saver. Dr Chisti wants every hospital
in developing countries to have the CPAP device available to them. “On that day, we can say that
IAMOT 2019 | 38
The Conceptual Structure for Developing Reverse Innovation with Virtual R & D
pneumonia-related mortality is near zero.” This is an innovation that can be used in developed
countries also, for example in some emergency situations.
The reverse innovation relates to so many new and old concepts of innovation in developing
economies. Globalization is the first stage of the evolution in innovation development, and caused to
multinational corporations have access to global markets. Before, innovative products and services
only was created in main countries of the multinational corporations and send to all markets in all
over the world without any modifications. The second stage the companies that produce innovative
products or innovative services, try to have some modification for the products to can compete more
in different countries markets and cover requirements of local customers.
The big companies that have office in different countries, usually have some R&D activities in
developing countries, because in this way they can use highly qualified educated people with lower
price and decrees the company’s operational costs. This kind of activities helped to have a transition
to the third stage of innovation that is local innovation. So big company can introduce new innovative
based products and services for local markets by using the power of big or multinational company.
In the fourth stage, we have reverse innovation and products and services that is made on base
of the developing countries’ markets, will introduce to developed countries markets. It look like
the direction of innovation process is reversed. Now, developing countries have different role in
innovation process.
Emerging markets will offer many possibilities for technology innovation, which is important from
the point of view of entrepreneurship development, as there is a high demand for good quality
products or services at affordable price (Hang & Garnsey 2011). Differences in the approach to
innovation in the globalization phase (conventional innovation path) and in the reverse innovation
phase (reverse innovation path) are presented in this figure, labled by (Hang & Garnsey 2011).
IAMOT 2019 | 39
Managing Technology for Inclusive and Sustainable Growth
7. Our Concept
In 2015, we published a paper IAMOT conference about cyber systems and virtual R&D. On that
paper we mentioned different benefits of virtual R&D and some other points that we introduced
some of them in the “virtual R&D” topic in this paper. Obtaining innovation needs to have share of
information which happens by utilizing cyber space such as social networks to augment its R&D to
virtual R&D. The crossing point of these two strategies which has the most overlapping causes the
appropriate innovation for the organization.
We are living in the age of industry 4.0 that virtual R&D and Internet of things (IOT) are two important
topics in this age and we described them in past parts of this paper and also in past IAMOT conferences.
In our figure in the next page, we are presenting the relation between reverse innovation with R&D,
virtual R&D and IOT and also with NPD. This relation can work in both direction.
Figure 6: Our Figure for Relation between “Reverse Innovation”, “R&D, virtual R&D and IOT” with “NPD”
As we described before, reverse innovation has a lot of advantages. But also there is some different
points that we can focus on them to improve normal procedure of reverse innovation. In our concept we
can use virtual R&D and IoT as two helping hand for the base of reverse innovation. We can imagine
this concept as an isosceles triangle. The heart of the triangle is reverse innovation that will happen in
developing country and its two legs assumed as virtual R&D and IoT beside the R&D works.
Figure 7: Our Figure for Reverse Innovation on the Heart, that Souronded by R&D, Virtual R&D and IOT
IAMOT 2019 | 40
The Conceptual Structure for Developing Reverse Innovation with Virtual R & D
So, according to our above figure, we can use this structure to improve the reverse innovation model
that presented by Hang & Garnsey in 2011 to reduce the costs and better performances.
According to our findings, we can use virtual R&D and IoT to develop reverse innovation more
easily. Doing in this way have a lot of benefits; for example reduce the costs and time in the reverse
innovation procedures. In the reverse innovation process we need to share informations between
two or more countries that one of them is a developing country and other is a developed country.
With using virtual R&D, we don’t need to hold face to face meetings and trips to another country
and share information, designs and results with different social media and various communication
environments. Also, by using IOT in the procedures and products, we can give very good and fast
feedback from the devices and process them in local or cloud space. For example if we have IOT in a
medical device that is in R&D procedure, all member of the R&D team (or all virtual R&D members)
will receive the results and feedbacks from device behavior in real-time.
So they can solve the problems much faster and easier than usual. On the other hands, it can help to
develop products that is so much more useful in the global market. It means both of the developing
countries and developed countries can take advantages of this products. The figure 9, shows how our
concept works for developing reverse innovation with virtual R&D and IoT.
IAMOT 2019 | 41
Managing Technology for Inclusive and Sustainable Growth
IAMOT 2019 | 42
The Conceptual Structure for Developing Reverse Innovation with Virtual R & D
Figure 10: Intelligent Robotic Systems Equipped with IOT made by Qeshm Voltage Company
So what we have done is using virtual R&D and IOT to do reverse innovation and produce a training
software in northwest city (as a developing area). So, in this way, engineers in both office was
sharing information with social media and virtual R&D and also with IOT capable devices, engineers
can test the results remotely from long distance. The expert electrical engineers in the main office
(Tehran) prepared some documents and scenarios and send them for program development team in
the other city. The programmers in the developing area worked on the software and share results
with electrical R&D guys in the Tehran throw virtual R&D and receive the feedbacks for improve
the software. In some parts, the programming team need to test something on the exact software
and that was possible with the IOT equipped devices that was in the main office in Tehran. With
working in this way the cost producing this software is very cheaper, as we didn’t need different trips
between these two areas for sharing information, holding meetings and test with hardware. The Final
software is a interactive environment. Interactive phrase means that in some parts the user should
perform the wiring, setting, and other works by himself in the simulated environment. In the next
pictures we have some screenshots from the software that is about servo motors.
Figure 11: Sample Page if Wirring Simulation in the Interactive Training Software
IAMOT 2019 | 43
Managing Technology for Inclusive and Sustainable Growth
Figure 12: Sample Page of Setting Parameters in the Interactive Training Software
Since our country is have a lot of engineers that need training before joining to industrial factories,
it is necessary that leading companies in this field try to provide related products and introduce them
more to help to expand this technology in Iran. So, that is why Qeshm Voltage engineering company
started to work on the development of various IOT-capable training and laboratory systems and
collections, which will in turn contribute to the development of this technology in Iran and after that
we can use reverse innovation to introduce our products to the global markets also. For example
we built a training simulation for ourselves with Iranian Cloud system, Raspberry electronic board
and some other industrial equipment for use as a training and testing equipment for students and
technical experts. Also another products include industrial robot with 3 and 5 degrees of freedom
as well as Mechatronics and FMS1 systems as a simulation of a real small factory. We used Iranian
cloud system in these products that provides a complete package to use in educational and research
purposes in the R&D centres, laboratories, industrial centres and universities. By using reverse
innovation with virtual R&D and IOT, we can expand our products in the different parts of Iran and
also in the future we can do reverse innovation with our partners in other countries.
9. CONCLUSION
Reverse innovation is an important topic and it has a lot of socially useful results in different countries.
Also it can increase the speed of information sharing between R&D centres and has good role in the
price of products. With using our concept we can reduce the prices so much and increase the process
speed of the new product development. Our concept will help the communication between R&D and
the innovator. Innovator can share his/ her comments with R&D team.
According to different experiences, it is clear that reverse innovation can be so much helpful for
expanding new products in the word that can solve a lot of problems, like expensive prices or hard
accessibility and etc. In this paper we introduced our new concept to improve some functions in the
reverse innovation process.
Actually presented concept will facilitate the connection between different centres in so many
aspects. It is so useful to develop different products for various sectors such as medical equipment,
food industries, trainings, mobility, electronics, mechanics, computer products and countless
other cases.
We think this concept can be used for a lot of developing countries and also developed countries to
implement reverse innovation in the better way.
1
Flexible manufacturing system
IAMOT 2019 | 44
The Conceptual Structure for Developing Reverse Innovation with Virtual R & D
REFERENCES
Akhavan, A., N., Jebalbarezisarbijan, A., (2008), National innovation system(NIS) in developing countries: The case of
Iran, International conference on Management of Technology.
Akhavan, A., N., Jebalbarezisarbijan, A., (2009), An endogenous growth model for technology transfer through
foreign direct investment from developed to less developed countries, International journal of technology,
knowledge and society. International conference on Management of Technology.
Aschmoneit M., Janevska D., Closing the gap between frugal and reverse innovation–Lessons learned from the case of the
Tata Nano, Linköping University Department of Management and Engineering (IEI), Spring semester 2013
Govindarajan V., A Reverse-Innovation Playbook, Harvard Business Review, APRIL 2012,
Hadengue M., Ben Mahmoud S., Jouini, Charue-Duboc F., The Deployment of Reverse Innovations: Adaptations
Between Developing and Advanced Markets, XXVIIe Conférence Internationale de Management
Stratégique, Montpellier, 6-8 juin 2018
Hadengue M., Marcellis-Warin N., Warin Th., (2017) “Reverse innovation: a systematic literature review”, International
Journal of Emerging Markets, Vol. 12 Issue: 2, pp. 142-182,
Immelt J.R., Govindarajan V. and Trimble Ch., How GE is disrupting Itself, Harvard business review, 2009,
Jabalbarezisarbijan, A., Golhosseini, S., Marangi, F., The conceptual role of cyber systems in virtual R&D, International
Association for Management of Technology (IAMOT Conference) 2015
Jabalbarezisarbijan, A., IOT in Electrical & Control Panel, linkedin.com
Jabalbarezisarbijan, A., Khalatbary, H., Talebi, M., The role of R&D management and collaborative R&D management
in product development and commercialization-Iran case study, IRAMOT & ASIALICS 2017
Jabalbarezisarbijan, A., Khalatbary, H., Talebi, M., Fasihi, F., I IoT development & vision in developing
countries-case study in Iranian companies, International Association for Management of Technology
(IAMOT Conference) 2018
Jebalbarezisarbijan, A., Golhosseini, S., Talebi, M., The role of collaborative R&D in firms, (2016), IAMOT 2016
Jebalbarezisarbijan, A., Khalatbary, H., Expert knowledge workers role in growing collaborative r&d (based on iran case
study), (2017), IAMOT 2017
Jebalbarezisarbijan, A., Nakhchi, M.H., Kamyabi, I., Abdoli. R, (2011) ,Commercialization Process of Innovation in
Industrial Training Sets, case study: SMEs, “Iranian Association of management of technology, IRAMOT 2011
Jebalbarezi Sarbijan, A., Nakhchi, M.H, Mahboubi, S., (2013) The conceptual role of RTD, IAMOT 2013
Khalatbary, H., IOT in Building Management Systems (BMS), linkedin.com
Lohia S., Taneja R., Role of Reverse Innovation in Business: A Case of Few Companies, Global Journal of Management
and Business Studies., Volume 3, Number 10 (2013), pp. 1081-1084
Longley, G., IoT and the digitization of manufacturing, industryweeks.com website article, 2016
Morgan, J., Internet of things, Forbes.com website article, 2017
OSTRASZEWSKA Z., TYLEC A., REVERSE INNOVATION–HOW IT WORKS, International Journal of Business
and Management Vol. III, No. 1/ 2015, page 57
Rouse, M. Internet of things, IoTagenda.com website article, 2017
Schneider Electric, 2017, Smart Panels, digitised electrical switchboards for buildings
Siemens AG Energy Management Whitepaper, 2017, Electrical power distribution in the Internet of Things,
Terrio M., Examining Reverse Innovation and Collaboration: A Case Study in the Context of Uganda, Department of
Management Studies Aalto University School of Business, 2014
Tuğba Karabulut A., (Prof. Dr.), CAN REVERSE INNOVATION ACCELERATE THE GROWTH OF GLOBAL
COMPANIES?, International Journal of Commerce and Finance, Vol. 3, Issue 2, 2017, 48-52, page 48
Zeschky M., Widenmayer B. and Gassmann O., Organising for reverse innovation in Western MNCs: the role of frugal
product innovation capabilities, Int. J. Technology Management, Vol. 64, Nos. 2/3/4, 2014, page 255
http://encyklopedia.pwn.pl/haslo/3914833/innowacje.html
www.bridgeport.edu/academics/graduate/technology-management-ms/
www.crossborder-technologies.com/Inno/
IAMOT 2019 | 45
Problems and Barriers to Innovation in SMEs in
the Manufacturing Industry in Brazil
Abstract
Small and medium-sized enterprises (SMEs) have been the target of economic and academic analysts given their
potential for employment and income generation. Due to their managerial specificities and the problems and barriers
that they face to innovate, these firms need specific Science, Technology & Innovation (ST&I) public policies,
which, in turn, are formulated and evaluated based on the results of National Innovation Surveys, among other
relevant sources. The present research aims to analyze and compare the problems and barriers faced by small and
medium enterprises (SMEs) in the Brazilian manufacturing industry, grouped by distinct levels of technological
intensity (using the classification established by the Organization for Economic Cooperation and Development as
reference). We have drawn the data from the National Innovation Survey 2014 (Pintec 2014), which was associated
with four categories of technological intensity of sectors in which the manufacturing firms have been operated.
The respondent firms belonging to each category (that have implemented innovations or not from 2012 to 2014)
were asked to inform their perceptions on the importance of the problems and barriers that they face to innovate,
in a three-point response scale (high, medium and low importance or not relevant). The research methodology
comprises: (i) literature review on problems and barriers to innovation faced by SMEs; (ii) documentary analysis
covering technological and industry classifications; (iii) definition of research scope and analytical framework,
according to the structure of the primary data source–the National Innovation Survey, published by the Brazilian
Institute of Geography and Statistics (IBGE); and (iv) data gathering and descriptive statistics to compare the
problems and barriers faced by SMEs in the Brazilian manufacturing industry, grouped by distinct levels of sectorial
technological intensity. This work contributes to the advancement of knowledge about problems and barriers to
innovation challenged different groups of SMEs in the manufacturing industry in Brazil, according to different
levels of technological intensity of sectors in which they have been operated. It also contributes to deepening the
debate on the current ST&I mechanisms to enhance absorptive capacity and promote higher innovation performance
of SMEs in Brazil vis-à-vis problems and barriers to innovation perceived by different groups of SMEs in the
Brazilian manufacturing industry.
Keywords: Small and Medium-sized Enterprises, Problems and Barriers to Innovation, Technological Intensity
Classification, Manufacturing Industry, National Innovation Survey, Brazil
1. Introduction
There is a growing recognition of the role played by small and medium-sized enterprises (SMEs)
in promoting economic growth and generating employment and income. however, SMEs face
problems and barriers to implement their innovations, which can be associated with several factors:
(i) economic and financial (excessive economic risks; high costs of innovation; and scarcity of
appropriate sources of funding); (ii) RD&I governance (organizational rigidity; centralization of
innovative activities in another company of the group); (iii) knowledge (lack of qualified personnel,
scarcity of information on market and technological information and scarce opportunities for
cooperation with other companies or institutions); (iv) market (poor consumer response to new
IAMOT 2019 | 46
Problems and Barriers to Innovation in SMEs in the Manufacturing Industry in Brazil
products); and (v) regulation (difficulty of meeting government regulations, legal or voluntary
standards requirements and difficult to access specialized technical/ technological services).
Due to their specificities and the problems and barriers that they face to innovate, these firms need
specific public Science, Technology & Innovation (ST&I) policies, which, in turn, are formulated
and evaluated based on the results of National Innovation Surveys, among other relevant sources.
Two currents of thought in the Management of Technology (MOT) literature address the perception
of companies concerning obstacles and barriers to innovation. The first focuses on how perceptions of
different types of obstacles are affected by business and sectorial characteristics. The second emphasises
the impacts of perceived barriers by companies on their propensity or capacity to innovate. The present
work can be framed in the first stream and aims to analyse and compare the problems and barriers faced
by small and medium enterprises (SMEs) in the Brazilian manufacturing industry, grouped by distinct
levels of sectorial technological intensity (using the OCDE classification as reference).
In Brazil, the various editions of the National Innovation Survey (Pintec), published by the Brazilian
Institute of Geography and Statistics (IBGE) have shown that the innovation rate tends to grow
monotonically with the size of the company. We have drawn the data from the National Innovation
Survey 2014 (Pintec 2014), which was associated to four categories of technological intensity of
sectors in which the manufacturing firms have been operated. The respondent firms belonging to
each category (that have implemented innovations or not from 2012 to 2014) were asked to inform
their perceptions on the importance of the problems and barriers that they face to innovate, in a
three-point response scale (high, medium and low importance or not relevant).
The findings can be summarized as follows: (i) comparative analysis of the problems and barriers
faced by SMEs in the Brazilian manufacturing industry, grouped by distinct levels of technological
intensity; (ii) discussion about the perceived criticality of obstacles on their propensity or capacity to
innovate, according to the level of technological intensity in which they were classified; (iii) critical
features to be considered by Science & Technology (S&T) policymakers and SME’s support agencies.
This work contributes to the advancement of knowledge about innovation capacity and obstacles and
barriers to innovation faced by different groups of SMEs in the manufacturing industry in Brazil,
according to their level of technological intensity. It also contributes to deepening the debate on the
current ST&I institutional mechanisms focusing on innovation capacity and performance of SMEs
in Brazil vis-à-vis obstacles and barriers to innovation perceived by different groups of SMEs in the
Brazilian manufacturing industry.
This article is organized in five sections, including this introduction. The second section presents
the theoretical framework on factors influencing the RD&I cycle, highlighting drivers and barriers
for innovation; characterization of SMEs and discussion on problems and barriers faced by
these firms to innovate; and technological classifications, focusing on the taxonomy of sectorial
technological intensity proposed by the Organization for Economic Cooperation and Development
(OECD) (Hatzichronoglou, 1997; OECD, 2011). Afterward, the third section entails methodological
approach and analyses the Pintec 2014 database focusing on data on the Brazilian manufacturing
sectors, covering the period from 2012 to 2014. The next section presents and discuss the descriptive
statistical results concerning the four groups of innovative and non-innovative firms in the Brazilian
manufacturing that are object of the empirical study. In the last section, we present the conclusions,
implications drawn from the results and suggestions for future research.
2. Theoretical Background
The theoretical background encompasses the following themes: (i) characterization of SMEs and
problems and barriers faced by these firms to innovate; and (ii) technological classifications,
focusing on the taxonomy of sectorial technological intensity proposed by the Organization for
Economic Cooperation and Development (Hatzichronoglou, 1997; OECD, 2011).
IAMOT 2019 | 47
Managing Technology for Inclusive and Sustainable Growth
IAMOT 2019 | 48
Problems and Barriers to Innovation in SMEs in the Manufacturing Industry in Brazil
Xie et al. (2010) explored barriers, cooperation networks and policy requirements in innovation
on the basis of a survey sample of 188 Chinese manufacturing SMEs. This work revealed that the
‘lack of technical experts’ was the most important barrier; the ‘customer’, the most important
cooperation partner; and the ‘preferential tax policy’, the most favorable policy in innovation
for SMEs in China. These findings also revealed that many Chinese SMEs have difficulties in
accomplishing successful innovation. Therefore, policies should be made based on internal and
external restrictions to facilitate innovation of SMEs and in function of the size and the mode of
ownership of those firms.
Zhu et al. (2012) developed a model characterized by a cost-risk-opportunity (CRO) innovation
triangle. They improved a preliminarY CONceptual model by interviewing 82 top managers and
owners at 41 SMEs in China and identified the five key institution-based barriers to innovation
in China, as follows: (i) competition fairness; (ii) access to financing; (iii) laws and regulations;
(iv) tax burden; and (v) support systems. These results enhanced the institution-based view of
entrepreneurship by discussing how institution-based barriers affect innovation in SMEs.
Demirbas et al. (2011) examined the barriers to innovation, as perceived and experienced by
owner-managers of 224 SMEs operating in Turkey. Empirical data were analysed using a logit
regression model to explore barriers to innovation as perceived and experienced by these
owner-managers. The results exposed that a lack of government research and development policy
represents a formal barrier to Turkish SMEs to innovation. The existence of a substantial and
booming underground economy in this country acts as an informal barrier that impacts negatively
upon investment in SMES and increases their cost of innovation. Besides, a lack of appropriate
sources of finance and skill shortages appeared as significant variables to influence the innovation
decisions of SME owner-managers in Turkey.
Tabas et al. (2011) focused on the determination of barriers to innovation potential of SMEs in the
Czech Republic. The primary research has been carried out in a sample of 173 SMEs from several
sectors and 11 statistical characteristics, mainly qualitative and categorical, have been observed.
These characteristics have been selected as possible factors influencing the innovation potential of
the SMEs. Selection of these characteristics was based on the secondary research on studies of the
focused issue. To determine the interaction between these variables and the innovation potential of
SMEs, analyses of variables dependence have been applied, especially the Chi-Square test, Pearson
coefficient of contingence and Chuprov’s coefficient. The results were compared with those coming
out from secondary research.
Feldens et al. (2012) identified the main barriers to product innovation in a small sample of
technology-based SMEs in Brazil. The innovation process and its obstacles were analyzed,
by interviewing entrepreneurs, venture capital investors and managers of business incubators.
The analyses compared two perspectives: (i) from the entrepreneurs; and (ii) from investors.
As main findings, they found: (i) difficulties concerning legal barriers, costs and availability of
capital; (ii) the lack of investors for advanced steps of the development and scarcity of exit modes,
raising the investment cycles compared to international averages; (iii) the investors participation
close to the entrepreneurs in the business management; (iv) the difficulty to find technical and
management qualified professionals to engage in new and uncertain businesses; (v) cultural aversion
to risks, inducing both the entrepreneurs as the investors to be more conservative in the decision
making; and (vi) sense of good perspectives for the future, tied to the capital availability.
Talegeta (2014) examined barriers for technological innovation in 207 SMEs operating in four
selected sub cities of Addis Ababa (Akaki, Bole, Kirkos and Yeka). The data gathered from managers
or owners’ using ordinary scale was analyzed quantitatively. The mean, mode, percentage and
correlation analyses were used to process variables and data analysis. The result of this study indicated
that the major barriers of introducing or expanding technological innovation for the sampled SMEs
are: (i) lack of government policy and regulation; (ii) lack of technological and market information;
(iii) inadequate research and development; (iv) high cost of innovation; (v) organizational culture; (vi)
lack of skilled personnel; and (vii) lack of finance and absence of cooperation.
IAMOT 2019 | 49
Managing Technology for Inclusive and Sustainable Growth
Strobel and Kratzer (2017) proposed a theoretical framework for describing obstacles to innovation
faced by SMEs from Germany and investigate their influence on their innovative performance.
Data were collected in 2013, through face-to-face interviews with executives of 49 technology-based
SMEs from this country. The interviews were planned on the basis of scales for quantitative assessment
of innovativeness, financial/ competitive performance and obstacles to innovation. They found that the
internal obstacles, such as lack of know-how, unclear roles and tasks, capacity overloading, as well
some external negatively influence the innovativeness and competitive performance of SMEs.
IAMOT 2019 | 50
Problems and Barriers to Innovation in SMEs in the Manufacturing Industry in Brazil
ii. Do the problems and barriers differ from one group to another? which problems and
barriers have been perceived as critical by innovative and non-innovative SMEs in
the manufacturing industry?
3. Research Design
3.1. Methodology
The research methodology encompasses: (i) literature review on problems and barriers to innovation
faced by SMEs; (ii) documentary analysis covering technological and industry classifications; (iii)
definition of research scope and analytical framework, according to the structure of the primary
data source–the National Innovation Survey, published by the Brazilian Institute of Geography and
Statistics (IBGE); (iv) data gathering and descriptive statistics to compare the problems and barriers
faced by SMEs in the Brazilian manufacturing industry, grouped by distinct levels of sectorial
technological intensity; and (v) discussion of the main results and implications for Brazilian Science
& Technology (S&T) policies and government agencies to enhance the innovation of small and
medium enterprises (SMEs) in the manufacturing industry.
Several research methods were selected to address the questions posed in the introductory section.
Firstly, a literature review covered the primary sources of peer-reviewed scientific articles, such
as Web of Science; Scopus; and Science Direct. Additionally, Google Scholar was accessed to
complement the search results. The analysis of current state of research on the central research
theme–problems and barriers faced by SMEs–revealed an opportunity to empirically evidence
which problems and barriers have been perceived as critical by these firms in the manufacturing
industry in Brazil that have implemented (or not) innovations from 2012 to 2014. Previous works
based on National Innovation Surveys (from Brazil or other countries) had not explored the
problems and barriers faced by SMEs, grouped by distinct levels of sectorial technological intensity
(using OCDE classification as reference).
Second, documentary analysis concerning the Brazilian Classification of Economic Activities
(CNAE) and the National Innovation Survey (Pintec) 2014 was conducted in order to classify the
economic activities of the respondent SMEs, according to their sectorial technological intensity.
As a result, four groups of respondent firms were defined, namely: (i) high technological intensity;
(ii) medium-high technological intensity; (iii) medium-low technological intensity; and (iv) low
technological intensity.
Third, an empirical study focusing the problems and barriers faced by manufacturing SMEs in Brazil
was carried out based on data from the National Innovation Survey 2014 (Pintec 2014). Descriptive
statistics was used to examine and compare the problems and barriers that have been perceived as
critical by these firms (innovative and non-innovative firms, from the above mentioned groups).
The empirical study used data from National Innovation Survey 2014 (Pintec 2014), focusing
Brazilian SMEs from the manufacturing industry, which involves the firm-level data on the innovation
performance (if they have implemented innovations or not from 2012 to 2014) and on the perceived
importance on problems and barriers to innovate faced by the innovative and non-innovative firms.
The differentiation between innovative and non-innovative firms is relevant in this case, once
their respective perceptions about problems and barriers are also distinct. When innovative firms
identify a specific problem or barrier, they refer to a problem or barrier that retard or unfeasible their
innovative activities. Non-innovative firms mention that have found problems or barriers that have
impeded them to conduct their innovative activities.
So, the Pintec 2014 questionnaire address two questions concerning problems and barriers to
innovation, differentiating innovative and non-innovative firms. Innovative firms are asked to answer
this question: “During the three-year period 2012-2014, has the company encountered problems or
barriers that may have slowed the implementation of certain projects or made them unfeasible?”.
IAMOT 2019 | 51
Managing Technology for Inclusive and Sustainable Growth
For non-innovative firms the question is: “During the period 2012-2014, has the company faced
problems or barriers that have impeded the development of innovative activities?”. The questionnaire
presents twelve factors related to problems and barriers to innovation with three options in terms of
the degree of importance of the problems and barriers (high, medium, low or not relevant).
IAMOT 2019 | 52
Problems and Barriers to Innovation in SMEs in the Manufacturing Industry in Brazil
The sample for analysis was narrowed to innovative and non-innovative SMEs that contains all
relevant information related to the twelve items of the Pintec questionnaire (those focusing on
problems and barriers to innovation). Firstly, firms included in this sample answered they had
barriers to innovation. Secondly, they were asked about the degree of importance of each of the
twelve items (if high; medium; low importance or not relevant).
In order to test the different effects of independent variables on the criticality of problems and
barriers as perceived by the manufacturing SMEs in Brazil, the sample firms have been split into
four mutually exclusive groups. For the categorization of the sample firms based on sectorial
technological intensity, this study followed the taxonomy established by the Organisation for
Economic Co-operation and Development (OECD) for manufacturing industry, as follows: (i) high
technology level (6,366 firms); (ii) medium-high technology level (1,484 firms); (iii) medium-low
technology level (11,151 firms); and (v) low technology level (18,908 firms).
From Table 1, it is possible to observe that the majority of SMEs belong to the low-tech and
medium-low-tech sectors (30,059 firms or 79,29% of the sample). Firms from the high-tech sectors
is the smallest group (7,850 firms or 20.71% of the sample).
This sample also includes innovative and non-innovative manufacturing SMEs of different sizes.
By using the Brazilian classification (Sebrae, 2018), firms with 99 workers or less belong to the
group of small-sized firms. Firms with 100 to 499 workers are classified as medium-sized. Table
2 presents the sample characterization, according to firm size and innovation performance, using
two intervals of number of workers (small and medium-sized firms) and two classes of innovation
performance (innovative and non-innovative firms).
Table 2: Sample Characterization According to Firm Size and Innovation Performance
Firm Size Innovation Performance
Sectorial Technological
Intensity Number of Innovation
Firm size % Number of Firms %
firms performance
Small 5,550 14.64 Innovative 4,081 10.77
High-tech Medium 816 2.15 Non-innovative 2,285 6.03
Subtotal 6,366 16.79 Subtotal 6,366 16.79
Small 1,305 3.44 Innovative 1,139 3.00
Medium-high-tech Medium 179 0.47 Non-innovative 345 0.91
Subtotal 1,484 3.91 Subtotal 1,484 3.91
Small 10,440 27.54 Innovative 6,113 16.13
Medium-low-tech Medium 711 1.88 Non-innovative 5,038 13.29
Subtotal 11,151 29.42 Subtotal 11,151 29.42
Small 17,575 46.36 Innovative 9,184 24.23
Low-tech Medium 1333 3.52 Non-innovative 9,724 25.65
Subtotal 18,908 49.88 Subtotal 18,908 49.88
All sectors Total 37,909 100 Total 37,909 100
Note: Firm size classification, according to Sebrae (2018): small firms: with 99 workers or less; medium firms: with 100 to 499
workers (Sebrae, 2018).
Source: Own elaboration from Pintec 2014 database.
According to Table 2, the small-sized firms represent the majority in each of the groups of sectorial
technological intensity. The medium-sized firms represent the smallest percentage in each group
of sectorial technological intensity. Thus, the sample is composed primarily by small companies
(37,157 firms, compared to 752 medium-sized firms). innovative firms represent 54.12% of the
sample, while non-innovative firms are 45.88%.
IAMOT 2019 | 53
Managing Technology for Inclusive and Sustainable Growth
3.3. Variables
The data from Pintec 2014 were accessed to analyse and compare problems and barriers faced by
SMEs from these four groups. Table 3 summarizes the variables from Pintec 2014 data set that are
relevant for the empirical study.
In this Survey edition (2014), the respondent firms (innovative and non-innovative) were asked
about the presence and the degree of importance of twelve factors related to problems and barriers
to innovation, as follows: (i) excessive economic risks; (ii) high costs of innovation; (iii) scarcity
of appropriate sources of funding; (iv) organizational rigidity; (v) lack of qualified personnel; (vi)
lack of technological information; (vii) lack of market information; (viii) scarce opportunities for
cooperation with other companies or institutions; (ix) difficulty of meeting government regulations,
legal or voluntary standards requirements; (x) poor consumer response to new products; (xi) scarcity of
adequate external technical and technological services; and (xii) centralization of innovative activities
in another company of the group. These factors are the dependent variables of this empirical study.
The control variable is firm size and explanatory variables include innovation performance (if the form
is innovative or not from 2012 to 2014); and industry classification (by CNAE e OECD taxonomy).
Table 3: Summary of Variables
Description Label Type Metric
Dependent Variable
3 – high importance; 2 – medium importance;
Excessive economic risks ECON Ordinal
1 – low importance or not relevant.
3 – high importance; 2 – medium importance;
High costs of innovation COST Ordinal
1 – low importance or not relevant.
3 – high importance; 2 – medium importance;
Scarcity of appropriate sources of funding FUND Ordinal
1 – low importance or not relevant.
3 – high importance; 2 – medium importance;
Organizational rigidity ORGA Ordinal
1 – low importance or not relevant.
3 – high importance; 2 – medium importance;
Lack of qualified personnel PERS Ordinal
1 – low importance or not relevant.
3 – high importance; 2 – medium importance;
Lack of technological information TINF Ordinal
1 – low importance or not relevant.
3 – high importance; 2 – medium importance;
Lack of market information MINF Ordinal
1 – low importance or not relevant.
Scarce opportunities for cooperation with 3 – high importance; 2 – medium importance;
COOP Ordinal
other companies or institutions 1 – low importance or not relevant.
Difficulty of meeting government regulations, 3 – high importance; 2 – medium importance;
CONF Ordinal
legal or voluntary standards requirements 1 – low importance or not relevant.
3 – high importance; 2 – medium importance;
Poor consumer response to new products RESP Ordinal
1 – low importance or not relevant.
Scarcity of adequate external technical and 3 – high importance; 2 – medium importance;
SERV Ordinal
technological services 1 – low importance or not relevant.
Centralization of innovative activities in 3 – high importance; 2 – medium importance;
CENT Ordinal
another company of the group 1 – low importance or not relevant.
Explanatory and control variables
Natural logarithm of the number of employees. Use of
Firm size SIZE Interval
Sebrae classification (Sebrae, 2018).
1-If the firm implemented innovation from 2012 to
Innovation performance INNO Binary 2014; 0-If the firm not implemented innovation from
2012 to 2014.
Two-digit industry classification in CNAE
Industry classification CNAE Categoric
(IBGE, 2007) and Pintec 2014 (IBGE, 2016).
IAMOT 2019 | 54
Problems and Barriers to Innovation in SMEs in the Manufacturing Industry in Brazil
4. Results
Aligned to previous works reviewed in the second section, the twelve items related to problems and
barriers to innovation were grouped into five categories, namely: (i) economic and financial factors;
(ii) RD&I governance; (iii) knowledge factors; (iv) market characteristics; and (v) regulation.
In this section, descriptive statistics results are summarized by comparing sub-samples disaggregated
by sectorial technological intensity and innovation performance (innovative and non-innovative
firms), as follows: (i) high-tech sectors; (6,366 firms); (ii) medium-high-tech sectors (1,484 firms);
(iii) medium-low-tech sectors (11,151 firms); and (v) low-tech sectors (18,908 firms). Accordingly,
Tables 4 to 7 refer to the descriptive statistics results addressed to the research questions posed in
second section, as follows: (i) Tables 4 and 5 show the results concerning innovative SMEs; and (ii)
Tables 6 and 7 refer to the results of non-innovative SMEs.
Table 4: Problems and Barriers Faced by Innovative SMEs Belonging to High-Tech and
Medium-High-Tech Sectors of the Manufacturing Industry in Brazil
IAMOT 2019 | 55
Managing Technology for Inclusive and Sustainable Growth
Table 5: Problems and Barriers faced by Innovative SMEs Belonging to Medium-low and Low-tech
Sectors of the Manufacturing Industry in Brazil
SMEs that have Implemented Innovations from 2012-2014
Medium-low Technological Intensity Low Technological Intensity
Presence of Degree of importance Presence Degree of importance
Problems and Barriers problems of problems and
Low Low
and barriers High Medium or not barriers High Medium or not
[Number of [%] [%] relevant [Number of [%] [%] relevant
firms] [%] firms] [%]
Economic and ECON 6,113 53.8 26.3 19.9 9,184 51.1 30.0 18.9
financial COST 6,113 49.4 37.5 13.1 9,184 50.7 34.9 14.4
FUND 6,113 49.4 22.2 28.4 9,184 45.7 26.1 28.2
Econ. and
Economic and financial 50.9 28.7 20.5 49.2 30.3 20.5
financial
RD&I ORGA 6,113 16.6 22.9 60.5 9,184 21.3 24.3 54.5
governance CENT 392 7.4 7.7 84.9 501 3.4 12.6 84.0
RD&I governance 12.0 15.3 72.7 RD&I governance 12.3 18.4 69.2
Knowledge PERS 6,113 34.5 30.1 35.4 9,184 37.1 31.8 31.0
TINF 6,113 17.0 33.9 49.1 9,184 19.3 33.9 46.8
MINF 6,113 11.6 27.7 60.6 9,184 14.2 29.3 56.6
COOP 6,113 19.1 18.0 62.9 9,184 27.1 20.5 52.4
Knowledge 20.6 27.4 52.0 Knowledge 24.4 28.9 46.7
Market RESP 6,113 16.0 21.9 62,1 9,184 11.8 32.1 56.1
Market 16.0 21.9 62.1 Market 11.8 32.1 56.1
Regulation SERV 6,113 13.8 26.6 59.5 9,184 17.7 26.3 55.9
CONF 6,113 12.7 26.3 61.1 9,184 18.9 23.3 57.8
Regulation 13.3 26.4 60.3 Regulation 18.3 24.8 56.9
Source: Own elaboration from Pintec 2014 database.
From Tables 4 and 5, the results suggest that there is a homogeneity across items and sectors,
especially in two categories of barriers, namely ‘economic and financial’ and ‘RD&I governance’.
Looking at the highest barriers to innovation perceived by innovative SMEs, these are related
to ‘excessive economic risks’ and ‘high costs of innovation’, both classified into the ‘economic
and financial’ category. These results are consistent with those findings reported by Freel (2000)
focusing on SMEs in England; March-Chorda et al. (2002) in Valencia (Spain) and Madrid-Guijarro
et al. (2009) also in Spain.
At the second level of importance, the innovative SMEs considered the items ‘lack of qualified
personnel’, ‘lack of technological information’ and ‘lack of market information’ as critical barriers
to innovation. The economic and financial factors, together with the difficulty in finding qualified
workers, partners and information seem to be the most important obstacles perceived by innovative
SMEs. The items classified into the categories ‘market’ and ‘regulation’ are not considered so
important in comparison with the ‘economic and financial’ and ‘knowledge’ items. Finally, the
lowest barriers to innovation perceived by innovative SMEs are tose related to ‘RD&I governance’,
that can be explained by their strategic and commitment competencies, competitive scope and
organizational capabilities that positively influence the innovation performance of a SME.
Figure 1 corresponds to the results shown in Tables 4 and 5 and compares in a graphic form the
perceptions of the innovative SMEs about the importance of the problems and barriers that they face
to innovate.
IAMOT 2019 | 56
Problems and Barriers to Innovation in SMEs in the Manufacturing Industry in Brazil
Figure 1: Problems and Barriers Faced by Innovative SMEs of the Manufacturing Industry in Brazil
IAMOT 2019 | 57
Managing Technology for Inclusive and Sustainable Growth
Similarly to the empirical evidence concerning problems and obstacles faced by innovative SMEs,
Tables 6 and 7 show the results regarding non-innovative SMEs belonging to high-tech, medium-high-
tech, medium-low-tech and low-tech sectors of the manufacturing industry in Brazil.
From Tables 6 and 7, the results reveal that there is a heterogeneity in most of the items and sectors,
except for items classified into the category ‘economic and financial’. Looking at the highest barriers
to innovation perceived by non-innovative SMEs, these are also related to ‘excessive economic
risks’ and ‘high costs of innovation’, both classified into the ‘economic and financial’ category.
Similar to findings of innovative SMES, These results are consistent with those results reported by
Freel (2000), March-Chorda et al. (2002) and Madrid-Guijarro et al. (2009).
Table 7: Problems and Barriers Faced by Non-innovative SMEs Belonging to Medium-low and Low-tech
Sectors of the Manufacturing Industry in Brazil
SMEs that have not implemented innovations from 2012-2014
Medium-low technological intensity Low technological intensity
IAMOT 2019 | 58
Problems and Barriers to Innovation in SMEs in the Manufacturing Industry in Brazil
Figure 2: Problems and Barriers faced by Non-innovative SMEs of the Manufacturing Industry in Brazil
IAMOT 2019 | 59
Managing Technology for Inclusive and Sustainable Growth
is slightly lower for non-innovative SMEs, which is consistent with previous works on this subject
(see the second section). However, considerable differences can be observed in reference to the
barriers faced by SMEs that have implemented innovations compared to those that have not
implemented. Some of the most important aspects observed in Figure 3 are highlighted as follows.
The most significant differences that can be observed in Figure 3 are related to the items of
‘RD&I governance’ and ‘knowledge’ categories. For the majority of innovative SMEs the items
‘lack of qualified personnel’, ‘lack of technological information’, ‘lack of market information’ and
‘scarce opportunities for cooperation with other companies or institutions’ are considered crucial
for their innovation projects. This result reinforces the hypothesis that for knowledge-based firms it
is necessary to have a highly qualified team, to have information on new technologies and market
and to establish cooperative relations with other companies or institutions for acquiring new ou
complementary knowledge assets.
It is also interesting to note that the barriers concerning ‘RD&I governance’ is the lowest important
barrier for firms that have implement innovations. Also, it was possible to observe that the
‘poor consumer response to new product’ (‘market’ category) is slightly more important for
innovative companies than for non-innovative companies. Perhaps, this is due to the fact that
innovative companies that try to introduce significantly new products in the market strongly depend
on the acceptance of customers to succeed, while for those non-innovate firms the importance of
this barrier decreases.
In essence, this exploratory and descriptive work allows to gather preliminary evidence on barriers
and problems faced by the small and medium manufacturing firms in Brazil, differentiating them
by the technological intensity of sectors in which they operate and by innovation performance
(if innovative or not).
5. Concluding Remarks
Based on empirical evidence from the Pintec 2014 data, the present study has attempted to analyse
and compare the problems and barriers faced by SMEs in the Brazilian manufacturing industry,
grouped by distinct levels of technological intensity (using the classification established by the
Organization for Economic Cooperation and Development as reference).
One main result of the empirical analysis is that a large percentage of innovative firms find barriers to
their innovation projects. In general, both innovative and non-innovative firms claim that the highest
barriers to innovation are those classified into ‘economic and financial’ category, namely ‘excessive
economic risks’, ‘high costs of innovation’ and ‘scarcity of appropriate sources of funding’.
Although the ‘economic and financial’ items were highlighted in the present research as being the
most important for all SMEs (whether innovative or not and operating in high-tech sectors or not),
it should be noted that barriers may be interdependent or reinforce each other. The formulation of
public policies and regulatory frameworks that promote SMEs’ innovative activities should also
consider both the importance of the barriers depending on the number of firms affected and whether
problems to innovate are complementary or substitutive. By way of illustration, the ‘scarcity of
appropriate sources of funding’ and ‘scarce opportunities for cooperation with other companies
or institutions’ are complementary for innovation projects but they can be substitutive for a SME
to become innovative. this analysis is particularly important for designing an innovation policy,
once institutional mechanisms and frameworks should consider the stage in which the SME is
positioned in the innovation funnel. The innovation policy ought to consider if the SME begins to
be an innovative firm or starts to increase their innovative efforts. A ST&I policy to overcome the
barriers and problems covered in Pintec 2014 (and evidenced in this work) may help the Brazilian
manufacturing SMEs to enhance their innovation performance but also to strengthen their absorptive
capacity, once both indicators are significantly related to each other.
IAMOT 2019 | 60
Problems and Barriers to Innovation in SMEs in the Manufacturing Industry in Brazil
This study has achieved its aim and establishes a basis for a more complex future research. As a matter
of fact, it is part of an ongoing M.Sc. research project in the field of Management of Technology
(MOT). The general objective of this research is two-fold. Firstly, it attempts to analyze the differences
and similarities between the perceptions about problems and barriers to innovation faced by Brazilian
SMEs from sectors of the manufacturing industry (classified by their technological intensity).
Secondly, it will investigate the correlations between the problems/ barriers and a set of explanatory
variables, such as government Incentives and public financing; sources of information; cooperative
arrangements for RD&I; and strategic protection methods. This paper is particularly aligned to the first
part of the research.
This general objective can be broken down to seven specific objectives that would together achieve the
overall goal of the research as follows: (i) to discuss the contributions of technological classifications,
theoretical references on the measurement of efforts and results of RD&I to support the analysis of
problems and barriers faced by SMEs belonging to sectors with different levels of technological
intensity (second section of this paper); (ii) to analyze empirical studies on problems and barriers faced
by SMEs, in order to identify gaps to be filled by this research (second section of this paper); (iii) to
classify the economic activities of the respondent firms of Pintec 2014, using the National Classification
of Economic Activities and considering the four levels of sectorial technological intensity proposed
by the OECD (third section of this paper); (iv) to characterize the firms sample, according to four
levels of sectorial technological intensity and to firm size (third section of this paper); (v) to analyze
the differences and similarities between the perceptions about problems and barriers to innovation
faced by Brazilian SMEs from the manufacturing industry in Brazil (fourth section of this paper);
(vi) to develop logit models to show the differences or similarities between the perceptions about
problems and barriers to innovation faced by innovative and non-innovative SMEs and coorelations
between problems/barriers and explanatory variables (object of the future work); and (vii) to perform
the specification tests, analyze and compare the results of logit-type models, with special attention to
interaction effects (object of the future work).
6. Acknowledgments
The authors gratefully acknowledge the support and collaboration of the Brazilian Institute of
Geography and Statistics (IBGE), by providing the data from the National Innovation Survey
(Pintec 2014) concerning problems and barriers faced by SMEs from 2012 to 2014.
7. References
Aidis, R., (2005), Institutional barriers to small- and medium-sized enterprise operations in transition countries. Small
Business Economics, 25, 305–318.
Demirbas, D., Hussain, J.G., Matlay, H., (2011), Owner-managers’ perceptions of barriers to innovation: empirical
evidence from Turkish SMEs. Journal of Small Business and Enterprise Development, 18 (4), 764-780.
Edwards, T., Delbridge, R., Munday, M., (2005), Understanding innovation in small and medium-sized enterprises: A
process manifest. Technovation, 25, 1119–1127.
Feldens, M.A., Maccari, E.A., Garcez, M.P., (2012), Barriers for production innovation in small and medium technology-
based firms in Brazil. Brazilian Business Review, 9 (3), 1–22.
Forsman, H., (2011), Innovation capacity and innovation development in small enterprises: a comparison between the
manufacturing and service sectors. Research Policy, 40, 739-750.
Freel, M.S., (2000), Barriers to product innovation in small manufacturing firms. International Small Business Journal,
18 (2), 60-80.
Hadjimanolis, A., (1999), Barriers to innovation for SMEs in a small less developed country (Cyprus). Technovation,
19, 561-570.
Hashi, I., Krasniqi, B.A., (2011), Entrepreneurship and SME growth: evidence from advanced and laggard transition
economies. International Journal of Entrepreneurial Behaviour & Research, 17 (5), 456-487.
Hatzichronoglou, T., (1997), Revision of the high-technology sector and product classification. In OECD Science,
Technology and Industry Working Papers. Working paper nº 1997/02. OECD Publishing.
IAMOT 2019 | 61
Managing Technology for Inclusive and Sustainable Growth
Instituto Brasileiro de Geografia e Estatística. IBGE, (2007), Classificação Nacional de Atividades Econômicas-CNAE:
versão 2.0. Rio de Janeiro: IBGE.
Instituto Brasileiro de Geografia e Estatística. IBGE, (2016), Pesquisa de Inovação. Pintec 2014. Rio de Janeiro: IBGE.
Madrid-Guijarro, A., Garcia, D., Van Auken, H., (2009), Barriers to innovation among Spanish manufacturing SMEs.
Journal of Small Business Management, 47(4), 465-488.
March-Chorda, I., Ganasekaran, A., Lloria-Aramburo, B., (2002), Product development process in Spanish SMEs: an
empirical research. Technovation, 22, 301-312.
Mbatha, B., (2012), Exploring the potential of electronic commerce tools in South African SME tourism service
providers, Information Development, 29 (1), 10–23.
Organisation for Economic Co-Operation and Development, OECD, (2005), Oslo Manual: guidelines for collecting,
reporting and using data on innovation, 3rd Edition. OECD Publishing, Paris.
Organisation for Economic Co-Operation and Development, OECD, (2011), ISIC Rev. 3 Technology intensity
definition. OECD Directorate for Science, Technology and Industry.
Sebrae, (2018), Micro, small and medium enterprises, 2018, <http://www.sebrae.com.br/>.
Strobel, N., Kratzer, J. (2017), Obstacles to innovation for SMEs: evidence from Germany. International Journal of
Innovation Management, 21 (3), 56-65.
Tabas, J., Beranová, M., Vavřina, J., (2011), Barriers to development of the innovation potential in the small and
medium-sized enterprises. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 59 (7),
447-458.
Talegeta, S., (2014), Innovation and barriers to innovation: small and medium enterprises in Addis Ababa. Journal of
Small Business and Entrepreneurship Development, 2 (1), 83-106.
Xie, X.M., Zeng, S.X., Tam, C.M., (2010), Overcoming barriers to innovation in SMEs in China: a perspective based
cooperation network. Innovation: Management, Policy & Practice, 12 (3), 298-310.
Zhu, Y., Wittmann, X., Peng, M.W., (2012), Institution-based barriers to innovation in SMEs in China. Asia Pacific
Journal of Management, 29 (4), 1131–1142.
IAMOT 2019 | 62
Innovation and Digitalization in SME’s:
A Research Agenda
Hanen Kooli-Chaabane
University of Tunis El Manar, Department of Industrial Engineering, Tunisia
E-mail: hanen.kooli@enit.utm.tn
Mauricio Camargo
Nancy Univercity, ERPI (Equipe de Recherche des processus Innovatifs), France
E-mail: Mauricio.Camargo@univ-lorraine.fr
Vincent Boly
Nancy Univercity, ERPI (Equipe de Recherche des processus Innovatifs), France
E-mail: vincent.boly@ensgsi.univ-lorraine.fr
Abstract
Over the past years, innovation was an important topic not only in the scientific literature but also in all company’s
activities. Indeed, innovation can create long-lasting advantage and produce valuable shifts in competitive position.
However, innovation is not the only concern of a company. In recent years, digitalization brought new forms of
competition to companies and especially to Small and Medium size Enterprises (SMEs). The digital revolution
impacted not only how products and services are designed, manufactured and distributed, but also changed the tools
used to create, collect and treat information. To be competitive, firms are adopting digitalization.
Articulating innovation and digitalization in a coherent development process is becoming imperative for SMEs.
The processes of innovation and digitization are transforming the working processes and routines within
companies. These transformations are reflected at workplaces, methods and processes of collaborations. Moreover,
the strategies of innovation and digitalization are often transverse and involve all the functions of the company.
Thus it could be hypothesized that some decisions, practices and methods are common to innovation and
digitalization processes within SMEs.
The first aim of this paper is to identify and stress the convergence points and analogies between the innovation
process and the digitalization process in SME’s context. In order to reach this target, we examined the available
scientific literature and analyzed the ongoing digitalization process for 9 PMEs working in the energy field.
While many companies are struggling to advance their digitalization process, the second aim of this paper is to
exploit the analogies between the two-studied processes to explore the potential use of the innovation tools and
methods to support the digitalization process.
The result of our work is a list of points of convergence between the innovation process and the digitalization
process in SME’s context. These points have been identified by a mixed approach: literature review and
experimental field feedbacks. Based on this convergence list, a research agenda dealing about the possible
contributions of the use of innovation tools and methods in the digitalization process is proposed.
Keywords: Innovation, Digitalization, Digitation, Analogy, Process, Digital Transformation
1. Introduction
In our everyday lives, Information Technologies (IT) became more common and present in almost
every part of our doings (Kadar et al., 2014). IT artifacts such as computers, software applications
and smartphones are everywhere (Goerzig and Bauernhansl, 2018). At work, in our homes and on
the street, we are witnessing an ongoing radical digital transformation (Stolterman and Fors, 2004).
With the digital transformation our life world became more connected. In this world, digital objects
became the basic materials of the physical reality. In a way, the physical reality became intelligent.
In fact, more and more objects have the power to continuously update themselves and their linked
network (Stolterman and Fors, 2004).
IAMOT 2019 | 63
Managing Technology for Inclusive and Sustainable Growth
To face the digital revolution, the company must digitalize, but this is not the only battle it must be
won. Companies have started another battle a long time ago: The battle of innovation. Indeed, to
resist to competition and the rapid renewal of economic data (products, processes, services, markets,
technologies, knowledge and know-how), innovation is an imperative for the company. It is an
important and vital means at their disposal to cope with changes in their environment. Innovation
allows companies to adapt their processes and internal organization to external developments.
It gives them means to take advantage of social, political, environmental, technological and economic
constraints or opportunities (Assielou, 2008).
Nowadays, SMEs must articulate innovation and digitalization in a coherent development process.
The processes of innovation and digitalization are transforming the working tasks and routine of the
company. These transformations are reflected at workplaces, methods and processes of collaborations.
Moreover, the strategies of innovation and digitalization are often transverse and involve all the
functions of the company. The question is then what are the possible analogies between the two
processes of innovation and digitization? While many companies are facing difficulties to carry
out their digitalization process, it is worth to ask if it is possible to exploit the knowledge, tools and
methods acquired on the innovation process to support the digitization process.
To address these questions, our paper is organized as follows. Section 2 describes the research
objectives and methodology. Section 3 presents the state of the art analysis. Finally, section 4
discusses the key findings and provides future research directions.
IAMOT 2019 | 64
Innovation and Digitalization in SME’s: A Research Agenda
H1: There are multiple convergence points between digital transformation process and the
innovation process.
RQ1: What are the convergence points between the innovation process and the digitization
process in SME’s context?
RQ11: Digitalization process: what, why and how?
RQ12: Innovation process: what, why and how?
RQ13: Innovation and digitalization process in SME: what is the connection?
RQ2: How can the innovation tools and methods serve and facilitate the digitalization
operational processes?
IAMOT 2019 | 65
Managing Technology for Inclusive and Sustainable Growth
All the companies have independent decision-making process and decided to engage a digital
transformation for both business and support processes. Support processes include administrative
management, resources and HR management and other transversal activities. The same Information
and Technology (IT) expert manages the nine-digitalization projects. The IT expert provides data
and information to the present research trough several interviews at each milestone of the different
projects. The aim of digitalization in these projects is:
i. Find new interrelation with the environment (digitalize the relation with
subcontractors, suppliers and customers),
ii. Perform the business processes more efficiently,
iii. Improve the product quality: scope, time and budget,
iv. Improve the working condition for employees.
IAMOT 2019 | 66
Innovation and Digitalization in SME’s: A Research Agenda
or work products. Goerzig and Bauernhansl (2018), based on a literature review, state that at the
moment there is no common definition for the digital transformation. Stolterman and Fors (2004)
argue that the digital transformation can be understood as the changes that the digital technology
causes or influences in all aspects of human life. In this paper, we adopt the definition proposed
by Goerzig and Bauernhansl (2018). The authors define digital transformation as “a fundamental
change process in enterprises initiated by new competitive advantages through the evolution of IT
into an essential part of the value creation”.
IAMOT 2019 | 67
Managing Technology for Inclusive and Sustainable Growth
on the fact that the company is proactive or obliged to adhere to the transformation process. Digital
imposed new challenges that many organizations struggle to handle (Sousa and Rocha, 2019).
Digitalization brought new forms of competition to companies and especially to Small and Medium
size Enterprises (SMEs) (Kadar et al., 2014). Schreckling and Steiger (2017) claim that digitalization
is no longer a choice but an imperative. The authors affirm that for all businesses across all industries
“the motto is digitalize or drown”.
IAMOT 2019 | 68
Innovation and Digitalization in SME’s: A Research Agenda
It is used iteratively to progressively set up the solution and refine the digitalization goals and plans.
The first stage consists of analyzing the probable impact of digitalization for the firm and deciding
the position to be taken in the change according to strategic objectives. The second stage is about
evaluating the existing situation of the firm with respect to the target position and assessing the gap
between the existing situation and the wanted one. The third stage is about setting up the appropriate
approach to fill the gap from the firm’s current state to the target situation and establishing the
required action plan to reach this situation. The fourth stage consists of applying and validating the
action plan and iterating the previous stages if needed.
Müller and Hopf (2017) claim that: “The digital transformation of systems and processes includes
risks and potentials, especially for SMEs”. As the financial constraint is very high for SMEs, the
digital transformation should offer a good cost-benefit ratio, a clear description of how the results
shall be realized and a risk benefit evaluation (Goerzig and Bauernhansl, 2018). Goerzig and
Bauernhansl (2018) emphasize the fact that SMEs are generally incapable of funding research and
development activities. Usually, they are unable to provide external support because of the luck
of funds. In addition, their employees frequently do not have the necessary expertise and time to
challenge the digitalization process.
IAMOT 2019 | 69
Managing Technology for Inclusive and Sustainable Growth
the response for the transition from a mass economy to a responsive economy. Today, innovation
has become a fourth key factor in the competitiveness of companies. Since 2010, innovation has
been seen as ‘the’ solution to major societal challenges and it is expected to boost competitiveness,
maintain employment and protect our social models (Joly, 2017).
Since Schumpeter (1934) many authors have studied innovation in different disciplines
(Garcia and Calantone, 2002). The reason for this interest is the realization that innovation
is a key importance for survival of an organization. Innovation is unavoidable key to
achieve firm’s competitiveness in up-to-date business (Rubera and Kirca, 2012). For some
organizations innovate is an initiative and for others it is mandatory to innovate to subsist
(Cortimiglia and Delcourt, 2015). The need for innovation is imperative in Coopers words, “It’s war:
Innovate or die” (Cooper, 2005).
IAMOT 2019 | 70
Innovation and Digitalization in SME’s: A Research Agenda
3.3. Digitalization and Innovation the two Heroes of the Same Tale
The latest decades, innovation and digitalization have gone hand in hand to the point where it is
difficult to know whether it is the digitalization of our society that drives innovation or the reverse.
The two concepts of innovation and digital are vast (Denervaud et al., 2014). In this section, we
are summarizing the convergence criteria that appear to be relevant through the previous literature
review. The partial results of our ongoing study are presented in Table 2. So far, we have found
sixteen points of convergence between the two phenomena studied. Our IT expert proposed two
of the sixteen criteria: “Need of Quick wins” and “Need of change management”. The rest of the
criteria were found in the literature. Eleven criteria have been validated both in the literature and in
the field and three only by the literature review (see table 2). Innovation and digitalization are both
recognized as a process and therefore as a coherent succession of activities that produce added value
within the company. They are complex, iterative and participative. Technology, people, skills and
culture play an important role in both processes. Innovation and digitalization processes are based
on three main stages: (1) observe and define, (3) imagine and design and (3) prototype and test.
They can impact economy, society, opportunities and challenges for business. They can even
produce disruptive change.
The culture of both processes is based on common elements: A focus on the user experience,
strategic questioning on the need, agility, adaptability and risk. Common elements for the benefit of
a common ambition: invent tomorrow, invent the future. A more in-depth analysis on the nature of
these points of convergence and their completeness is underway.
IAMOT 2019 | 71
Managing Technology for Inclusive and Sustainable Growth
Table 2: Innovation and Digitalization Process Convergence
Criteria/ Invariant Bibliography Reference for Comments
Innovation Digitalization
1 (Boly, 2008), (Garcia (Schreckling and Steiger, 2017), Validated in the field
and Calantone, 2002), and by the literature
(Cooper, 2001), (Kooli- review
Seen as processes
Chaabane, 2011),
(Masson et al., 2006),
(Morel, 1998)
2 (Boly, 2008), (Denervaud et al., 2014), Validated in the field
(Denervaud et al., 2014), (Schreckling and Steiger, 2017), and by the literature
Complex
(Ben Rejeb, 2008), (Goerzig and Bauernhansl, 2018) review
(Cooper, 2001)
3 (Masson et al., 2006), (Schreckling and Steiger, 2017), Validated in the field
Risky (Cooper, 2001), (Ben (Goerzig and Bauernhansl, 2018) and by the literature
Rejeb, 2008) (Müller and Hopf, 2017) review
4 (Garcia and Calantone, (Denervaud et al., 2014), (Parviainen Validated in the field
2002), (Boly, 2008), et al., 2017) and by the literature
Iterative process
(Kooli-Chaabane, 2011), review
(Assielou, 2008)
5 (Boly, 2008), (Kooli- (Schreckling and Steiger, 2017), Validated in the field
Participative Chaabane, 2011) (Henriette et al., 2015) and by the literature
review
6 (Schumpeter, 1934), (Schreckling and Steiger, 2017), Validated in the field
(Assielou, 2008) (Henriette et al., 2015), (Goerzig and and by the literature
Technology foundation
(Schreckling and Steiger, Bauernhansl, 2018), (Stolterman and review
2017), (Boly, 2008) Fors, 2004)
7 (Boly, 2008), (Kooli- (Goerzig and Bauernhansl, 2018), Validated in the field
People, skills and culture
Chaabane, 2011) (Schreckling and Steiger, 2017) and by the literature
are very important
review
8 (Denervaud et al., 2014) (Denervaud et al., 2014), Validated in the field
Focus on user experience
(Schreckling and Steiger, 2017), and by the literature
(Customer Centricity)
(Kirsten et al., 2018) review
9 (Midler, 1998) (Schreckling and Steiger, 2017), Validated by the
Can produce disruptive (Henriette et al., 2015), (Goerzig and literature review
change Bauernhansl, 2018), (Parviainen et
al., 2017), (Müller and Hopf, 2017)
10 (Boly, 2008), (Assielou, (Schreckling and Steiger, 2017), Validated by the
Impacts: Economy,
2008), (Dert, 1997), (Henriette et al., 2015), (Goerzig and literature review
Society, Opportunities
(Midler, 1998), (Joly, Bauernhansl, 2018), (Parviainen et
for businesses,
2017), (Rubera and al., 2017)
Challenges for business
Kirca, 2012)
11 Objects: process and (Boly, 2008), (Ben (Matt et al., 2015), (Schreckling and Validated in the field
work, products and Rejeb, 2008), (Kooli- Steiger, 2017) and by the literature
services, Business models Chaabane, 2011) review
12 Business Models and (Joly, 2017), (Garcia and (Schreckling and Steiger, 2017) Validated by the
offering Calantone, 2002) literature review
13 3 typical stages: (1) (Denervaud et al., 2014) (Denervaud et al., 2014) Validated in the field
observe and define, (3) and by the literature
imagine and design and review
(3) prototype and test.
14 (Denervaud et al., 2014) (Richard and Devinney, 2005), Validated in the field
Need of strategy (Matt et al., 2015), (Schreckling and and by the literature
Steiger, 2017) review
15 Need of change Under study Under study Proposed by the IT
management expert
16 Under study Under study Proposed by the IT
Need of quick wins
expert
IAMOT 2019 | 72
Innovation and Digitalization in SME’s: A Research Agenda
References
Assielou, N., (2008), Évaluation des processus d’innovation. Doctoral dissertation, Lorraine INP.
Ben Rejeb, H., (2008), Phases amont de l’innovation: proposition d’une démarche d’analyse de besoin et d’évaluation
de l’acceptabilité d’un produit. Doctoral dissertation, Lorraine INP.
Boly, V., (eds.) (2008), Ingénierie de l’innovation: Organisation et méthodologies des entreprises innovantes. 2e édition
revue et augmentée. Paris: Hermes Science Publications.
Catlin, T., Scanlan, J. and Willmott, P., (2015), Raising your Digital Quotient| McKinsey [28 November 2018].
Cooper, R.G., (eds.) (2001), Winning at new products: Accelerating the process from idea to launch. 3rd edition.
Cambridge, Mass: Basic Books.
Cooper, R.G., (eds.) (2005), Product leadership: pathways to profitable innovation. 2nd ed. New York: Basic Books.
Cortimiglia, M.N. and Delcourt, C.I.M., (2015), A systematic literature review on firm‐level innovation management
systems. In Pro. 24th Int. Conf. IAMOT. Technology, Innovation and Management for Sustainable Growth,
pp. 16. Cape Town: South Africa.
Denervaud, I., Dupuis, M. and Labrousse, S.C., (2014), Innovation et digital : une convergence inéluctable, L’Expansion
Management Review, 153 (2), 96–106.
Dert, F., (eds.) (1997), L’art d’innover ou la conquête de l’incertain. Paris: Maxima L Mesnil.
Garcia, R. and Calantone, R., (2002), A critical look at technological innovation typology and innovativeness
terminology: a literature review, Journal of Product Innovation Management, 19(2), 110–132.
Goerzig, D. and Bauernhansl, T., (2018), Enterprise architectures for the digital transformation in Small and
Medium-sized Enterprises. Procedia CIRP, 67, 540–545.
Gutmann, R., (2003), Innovation in integrated electronics and related technologies: Experiences with
Industrial-sponsored large-scale multidisciplinary programs and single investigator programs in a research
university. In The International Handbook on Innovation. pp. 548–555. Elsevier.
Henriette, E., Feki, M. and Boughzala, I., (2015), The shape of digital transformation: A systematic literature review. In
Pro. 9th Mediterranean Conference on Information Systems (MCIS), pp. 14. Samos: Greece.
Joly, P.B., (2017), Beyond the competitiveness framework? Models of innovation revisited, Journal of Innovation
Economics, 22(1), 79–96.
Kadar, M., Moise, I.A. and Colomba, C., (2014), Innovation management in the globalized digital society,
Procedia-Social and Behavioral Sciences, 143, 1083–1089.
Kirsten, L.N., Sven, P. and Kristin, V., (2018), Drivers of digital transformation in manufacturing. In Pro. 51st Hawaii
International Conference on System Sciences, pp. 3926-3935. Waikoloa Village: Hawaii.
Kooli-Chaabane, H., (2011), Le transfert de technologie vu comme une dynamique des compétences technologiques:
application à des projets d’innovation basés sur des substitutions technologiques par le brasage métallique.
Doctoral dissertation, Lorraine INP.
IAMOT 2019 | 73
Managing Technology for Inclusive and Sustainable Growth
Masson, P.L., Weil, B., Hatchuel, A., Rivier, P. and Maurer, M., (eds.) (2006), Les processus d’innovation : Conception
innovante et croissance des entreprises. Paris: Hermes Science Publications.
Matt, C., Hess, T. and Benlian, A., (2015), Digital transformation Strategies. Business & Information Systems
Engineering, 57(5), pp. 339–343.
Midler, C., (eds.) (1998), L’auto qui n’existait pas: management des projets et transformation de l’entreprise. Paris:
Dunod.
Morel, L., (1998), Proposition d’une ingénierie intégrée de l’innovation vue comme un processus permanent de création
de valeur. Doctoral dissertation, Lorraine INP.
Müller, E. and Hopf, H., (2017), Competence center for the digital transformation in Small and Medium-Sized
Enterprises. Procedia Manufacturing, 11, pp. 1495–1500.
Parviainen, P., Tihinen, M., Jukka, K. and Teppola, S., (2017), Tackling the digitalization challenge: how to benefit
from digitalization in practice. International Journal of Information Systems and Project Management, 5(1),
pp. 63–77.
Richard, P.J. and Devinney, T.M., (2005), Modular strategies: B2B technology and architectural knowledge. California
Management Review, 47(4), pp. 86–113.
Rubera, G. and Kirca, A.H., (2012), Firm innovativeness and its performance outcomes: A meta analytic review and
theoretical integration. Journal of Marketing, 76(3), pp. 130–147.
Schilling, M.A., (eds.) (2013), Strategic management of technological Innovation. 4th ed. New York: McGraw-Hill
Higher Education.
Schmickl, C. and Kieser, A., (2008), How much do specialists have to learn from each other when they jointly develop
radical product innovations?. Research Policy, 37(3), pp. 473–491.
Schreckling, E. and Steiger, C., (2017), Digitalize or drown. In Shaping the Digital Enterprise: Trends and Use Cases
in Digital Innovation and Transformation, Oswald, G. and Kleinemeier, M. (eds), pp. 3–27. Cham: Springer
International Publishing.
Schumpeter, J.A., (eds.) (1934), The theory of economic development. London: Oxford. Harvard University Press.
Sousa, M.J. and Rocha, Á., (2019), Digital learning: Developing skills for digital transformation of organizations. Future
Generation Computer Systems, 91, pp. 327–334.
Stolterman, E. and Fors, A.C., (2004), Information technology and the good life. In Information Systems Research:
Relevant Theory and Informed Practice, Kaplan, B., Truex, D.P., Wastell, D., Wood-Harper, A.T. and
DeGross, J.I. (eds), pp. 687–692. Boston: Springer US.
IAMOT 2019 | 74
Financing Innovation: Benefit of the Innovation
Vouchers to Foster the Link between SME’s
Needs and University Capabilities
Laure Morel
Université de Lorraine,
ERPI (Equipe de Recherche des Processus Innovatifs),
France
E-mail: laure.morel@univ-lorraine.fr
Mauricio Camargo
Université de Lorraine,
ERPI (Equipe de Recherche des Processus Innovatifs),
France
E-mail: mauricio.camargo@univ-lorraine.fr
Pascal Lhoste
Université de Lorraine,
ERPI (Equipe de Recherche des Processus Innovatifs),
France
E-mail: pascal.lhoste@ensgsi.univ-lorraine.fr
Abstract
SMEs play a capital role in regional economies in terms of employment, and added value generation. At European,
national and local levels, several programs and policies oriented to support and enhance innovation capabilities of
SME’s were developed. Nevertheless, some authors consider that direct impacts on SME’s of these investments
are questionable (Morel et al., 2009; Morel, 1998). This can be due to misaligned strategies between firms and
universities. Within this context, new business models appear to fulfil the gap. In this paper, we are interested
particularly on the concept of « Innovation Vouchers (IV)», which are used widely in Anglo-Saxon countries but
still emerging in France.
Innovation vouchers are small lines of credit provided by governments to small and medium-sized enterprises
(SMEs) to purchase services from public knowledge providers with a view to introducing innovations (new
products, processes or services) in their business operations (OECD, 2010). By analogy, we will present in this
paper an original financing tool, the ATI (French acronym standing for Transfer and Innovation Workshops) that
enables to train students, entrepreneurs, and scientists on a real problem provided by a firm, and, at the same time,
allows finding new ways of financing its projects of innovation.
Based on the experience of the use of innovation voucher scheme for several years on two concrete examples: a
company in the field of ergonomic instruments and, a second on the field of roadside mowing machines, within
the framework of a collaborative partnership with an engineering school. The impacts this program over the time
were underlined, searching to have a better understanding on the ability of such program to create a new dynamic of
development giving benefits to both university and firms.
Furthermore, evidences of these two cases, allows us to infer that the concept of “innovation voucher” cannot be
only reduced to a material aspect (financing) but also be considered with a non-material perspective that is today a
real part in the value creation process.
Keywords: Innovation Voucher, SMEs Innovation, Training Modules, Learning Process, Long Term Impacts
1. Introduction
In a context of change toward a knowledge economy, the relation between research, training,
business and territories is a major challenge. However, under this new economic dynamics, there is a
gap between SMEs needs and Universities/Research Centres’ technological offer. The development
IAMOT 2019 | 75
Managing Technology for Inclusive and Sustainable Growth
of SMEs is directly related to technological development and the integration of technology into
their product lines and industrial process. However, access to technology, particularly through
collaboration with scientific laboratories, is often very difficult for companies such as SMEs.
Indeed, they often have neither the structure nor the skills to foster a close dialogue with a scientific
structure.
In addition, the public innovation players (laboratories of research, etc.), are not systematically
identified by companies as been relevant innovation partners to provide technological services. This
situation is explained in particular by:
●● The low visibility of academics’ skills and of the results of their research work, added to
the focus and cultural differences with companies.
●● The difficulties of some public partners in understanding the activity and the company’s
needs, and to propose adapted answers.
●● The difficulty of public actors to coordinate in an efficient way their offer of technological
services.
●● Complex communication and administrative procedures that make it difficult to access
public partners. Indeed, the identification of public partners’ competencies and ressources
is most often made by personal network and word of mouth, when a need arises.
●● The difficulty for companies to arbitrate between carrying out the activity to respond to
current orders and time spent, to develop and to mobilising public partners to support the
innovation process. Investment in energy and time to collaborate with public partners
is often perceived as been too high to achieve results that remain hypothetical. This is
linked to the uncertain nature of innovation.
●● The low knowledge and experience capitalization of SMEs (DGCIS, 2011)
Within this context, new business models are required, searching for improving the innovation
capabilities of firms thanks to the creation of new links with its ecosystem. In this paper, we’re
interested particularly on the concept of « innovation vouchers », used widely in Anglo-Saxon
countries but still emerging in France.
Innovation Vouchers are small lines of credit provided by governments to small and medium-sized
enterprises (SMEs) to purchase services from public knowledge providers with a view to introducing
innovations (new products, processes or services) in their business operations (Cornet et al 2006).
By analogy, in this paper we intend to show how this concept allows to redefine the Goverment/
enterprise/university relationships by developing new ways of innovation financing. In a period
of budget reduction, a university and a regional autorities should develop new tools to provide
innovation support services to companies, especially SMEs in a win-win relation. In that way, we
will present an original concept named “ATI” (Transfer and Innovation Workshops) that illustrate the
local organization of resources between universities, enterprises and a region in France (Lorraine).
IAMOT 2019 | 76
Financing Innovation: Benefit of the Innovation Vouchers to Foster the Link between SME’s Needs
Commission evaluates direct contribution at the regional scale represents 15.2% of the total. The
European Union representing 12.7% of direct support, is also a key actor, with almost equal weight.
Currently, due to public policies of shortage of resources and the growing demand about innovation
support, there is a emergence of new innovative financing methods such as crowdfunding,
crowlending and innovation vouchers (IV) among others. Since 2010, it can be noted the increasing
use of a new participatory financing method for innovation: the crowdfunding. “The crowdfunding
is defined as the collective effort of individuals (the crowd) who pool financial resources to support
projects initiated by other individuals or organizations (Belleflamme et al., 2014; Mollick, 2014)” in
(Khelladi et al., 2018). Moreover, recently, we have seen the emergence of a new form of participatory
financing, the crowlending. As noted by (De la Pallière and Goulet, 2018), its appearance in 2014”...
ended the banking monopoly on interest-bearing loans. Since then, individuals can participate
directly in the financing of the real economy and receive financial compensation in the form of
interest. Businesses, especially SMEs, thus have access to a new method of financing. In the same
vein, the concept of microlending is also emerging, on a smaller scale.
In parallel, in 2010, the OECD defined the issues and targets of the innovation concept voucher
as following : « Innovation vouchers normally target SMEs in light of the contribution (normally
below EUR 10 000) they provide for the introduction of small-scale innovations at the firm level.
SMEs tend to have limited exposure to public knowledge providers such as universities and research
organisations as they may see such institutions as irrelevant to their business activities or be
unwilling to invest in the search costs necessary to identify relevant providers. On the other hand,
staff in public knowledge providers may see little incentives in working with small firms when the
latter have lower absorptive capacity and guarantee lower returns as compared to large companies
and other public agencies.
The main purpose of an innovation voucher is to build new relationships between SMEs and public
research institutions which will: i) stimulate knowledge transfer directly; ii) act as a catalyst for
the formation of longer-term more in-depth relationships. In a snapshot, innovation vouchers are
intended as pump-priming funding through which initial industry-university relationships can be
established.
The issuing of the voucher has two main impacts, both of which overcome major incentive barriers
to the usual engagement between SMEs and knowledge providers. First, the voucher empowers
the SME to approach knowledge providers with their innovation-related problems, something that
they might not have done in the absence of such an incentive. Secondly, the voucher provides an
incentive for the public knowledge provider to work with SMEs when their trend might either have
been to work with larger firms or to have no industry engagement at all.” (OECD, 2010). In the next
section a particular type of innovation voucher will be exposed: the ATI workshop.
IAMOT 2019 | 77
Managing Technology for Inclusive and Sustainable Growth
●● Initiate a new approach in the company for which there are generally no specific
constraints (regulatory, market or customers,...) and/or spinoffs are not easily measurable
in advance.
●● This is why we were interested by the IV concept that lead in fact to set up and test a
simple system for financing an external expertise for SMEs with innovative projects and
to contribute to a “learning by doing” attitude. Indeed, the goal of the ATI is twofold.
The financing principle is simple: it is a co-financing procedure that is to say, the SME
has to give Half of the budget in order to get the IV by the Regional council will with a
limitation of 20.000 euros per project.
Figure 1: Semester 1 (September to à January): Basics on Management of Innovative Projects and Project Organization
IAMOT 2019 | 78
Financing Innovation: Benefit of the Innovation Vouchers to Foster the Link between SME’s Needs
The objective of the first semester is to give a common background to the project team. Indeed, these
courses will be useful to help them to have both an individual and collective thinking on the project
they have to develop. This first step is crucial because a lot of innovative project failed due to a lack
of cross studies and a bad definition of the problem.
This is the reason why we decided to have the following timing: Friday morning, the basics and
Friday afternoon, application of the courses on the SME project’s main issue.
At the end of this stage, we have a clear and concrete definition of the project, its challenges and the
planning to obtain results.
●● Stage 2: Semester 2 (January to June): Operational implementation of the project
During this period, Friday is now dedicated to the piloting of the project, that is to say that all the
team is working on the concrete development project.
One advantage of this structure is that we can benefit from a resource center which aim is to provide
some “flash courses” if needed by the team or that give the access to an expert’s database.
4. Expected Results
As we have already said, the ATI project is a tool for igniting, accelerating and facilitating innovation
through:
●● A better identification and formalization of an industrial issue of technological
development.
●● A more efficient piloting of the project thanks to the access to competencies and tools
that SMEs don’t basically get.
IAMOT 2019 | 79
Managing Technology for Inclusive and Sustainable Growth
●● Adapted training sessions for the SMEs employees or managers regarding their project.
●● A progressive integration of the SMEs to the local scientific and technology environment
regarding the project needs.
●● A concrete use of all the methods favouring a collaborative work.
6. Main Implications
considered strategic issues. Consequently, one can note that innovation management and strategy
start to be considered and integrated within the firms’ day-to-day routines.
7. Conclusion
As a conclusion, the concept of “innovation voucher” cannot be only reduced to a material aspect
(pure financial) but also be considered with a non-material perspective that is today a real part in the
value creation process.
References
Bary, R., Rees, M., (2006). Is (self-directed) learning the key skill for tomorrow’s engineers? Eur. J. Eng. Educ. 31, 73–81.
Belleflamme, P., Lambert, T., and Schwienbacher, A. Crowdfunding: An Industrial Organization Perspective. Prepare for the
workshop on Digital Business. Models: Understanding Strategies, (2010).
Boly, V., Morel, L., Camargo, M., (2017). Innovation management: twenty-three years of higher education in a French
engineering school. Ragioni Erasmus 1.
Kleine, K., Giones, F., Tegtmeier, S., Camargo, M., (2017). Building technology entrepreneurship capabilities, an engineering
education perspective., in: International Research Conference on Science and Technology Entrepreneurship
Education.
Bary, R (2002). Les voies/voix de l’innovation : de la naissance de l’idée innovante à sa matérialisation, une analyse cognitive des
pratiques et apprentissages des innovateurs , Unpublished doctoral dissertation l’ Institut National Polytechnique
de Lorraine (I.N.P.L.)- France.
Batjargal, B. (2007). Internet entrepreneurship: social capital, human capital, and performance. Research Policy 35 (5), 605–
618.
Camargo, M, L Morel-Guimaraes and V Boly (2009). Ingénierie de l’Innovation : réflexion sur une dynamique de renouvellement
de l’espace des connaissances favorisant l’innovation, chap 11, in « Lois d’évolution des systèmes techniques et
Méthodologies de conception », Edition L’Harmattan, sous presse.
Commission des Communautés Européennes (2008). Communication du 24.12.2008, (europa.eu.int/eur-lex/fr/com/
cnc/2008/).
CNEPI, Commission nationale d’évaluation des politiques d’innovation (2016), Quinze ans de politiques d’innovation en France,
https://www.strategie.gouv.fr/sites/strategie.gouv.fr/files/atoms/files/fs_rapport_cnepi_21012016_0.pdf
Conseil Economique et Social de Lorraine (2004). L’innovation en Lorraine, Rapport du Conseil Economique et Social de
Lorraine, 17.06.04.
Cornet, M., B. Vroomen and M. van der Steeg (2006), “Do Innovation Vouchers Help SMEs to Cross the Bridge towards
Science”? in CBP Discussion Paper No. 58, Netherlands Bureau for Economic Policy Analysis, The Hague. www.cpb.
nl/eng/pub/cpbreeksen/discussie/58/
de la Pallière, N., & Goullet, C. (2018). Motivations and contributions of crowdlending, innovative financing: The financing case
of two franchisors. Innovations, (2), 41-65.
DGCIS, Direction Générale de la Compétitivité des Industries et des Services (2011). Les dispositifs publics de soutien à innovation
dans les entreprises. file:///Users/mauricio/Downloads/DGCIS-Dispositifs-publics-de-soutien-a-l-innovation.pdf
European Innovation Scoreboard (2006), Innovation Index and Trends.
Khelladi, Insaf, Sylvaine Castellano, and Aurore Bertaud. “The determinants of the web user’s trust in the context of
crowdfunding.” Innovations 2 (2018): 117-140.
Morel, L (1998). Proposition d’une Ingénierie Intégrée de l’Innovation vue comme un processus permanent de création de
valeur. Thèse de doctorat de l’ Institut National Polytechnique de Lorraine (I.N.P.L.)- France.
Morel, L and C Guidat (2005). Innovation in engineering education: a French sample of design and continuous updating of an
Engineering School to Industrial Needs, International Journal of Technology Management, Inderscience Publishers,
V32,Nos 1/2,57-72
OECD, (2010). Innovation vouchers (Policy Document). Paris, France.
Schwartz, D and Malach-Pines, A (2007). High technology entrepreneurs versus small business owners in Israel. Journal of
Entrepreneurship
IAMOT 2019 | 81
Smart and Interactive Packaging—On Long Term
Studies and Technological Enablers in Retailing of
Consumer Packaged Goods (CPG)
Torben Tambo
Aarhus University, Department of Business Development and
Technology, Denmark
E-mail: torbento@btech.au.dk
Justina Lydekaityte
Aarhus University, Department of Business Development and
Technology, Denmark
E-mail: justina@btech.au.dk
Abstract
This paper is presenting and analysing the industrial trend of Smart and Interactive Packaging (SIP) that aims at
adding digital elements to consumer packaged goods (CPG) in the form of individual serial numbers, wireless
connectivity, augmented reality, sensors, and internet-enabled functionalities. The purpose of this paper is to
review and understand SIP from a management of technology perspective with respect to innovation drivers
and stakeholders, maturing of technology, types of successful configurations and a projection of technological
design most likely to succeed to a market level of productivity. Key findings are that the area until now has been
technology driven, secondly it seems like brand-driven, to a lesser extent supply chain, retail and consumers
have been driving forces in the area. Originality of this paper attributes to the study of SIP as a technology in its
early stages having passed a number of critical gates on the way to a largely adoption in the industry; the vision
of “everything connected” is technologically demanding and socially challenging and research is fundamental to
responsible priorities of investments and technological enablement. Research implications of this paper relates to, in
the view of technology as driver, how complex and loose networks of technological development can support or fail
to support each other to achieve useful outcomes. Furthermore is interesting to study that complex technologies like
semiconductors, conductive inks, graphene-based printing is first developed in large organisations, then matured
in smaller start-ups, and then again adopted by the largest global players. The social implications of the area are
large and widespread with retailing being one of the largest industries, and CPGs being consumed by the global
consumer.
Keywords: Smart Interactive Packaging, Consumer Packaged Goods, Management of Technology, Technology
Studies, Technology Foresight
1. Introduction
Packaging is fundamental to products and retailing in many sectors, and packaging is thus one of
the brand owner’s most powerful tools to attract and retain consumers (Kim et al., 2017; Cousté
et al., 2012). Smart and interactive packaging (SIP) is the expectation that the packaging of
consumer packaged goods (CPG) (Lamey et al., 2018; Akkas et al., 2017) in certain sectors will
converge and bridge between the digital product development, the digital marketing, the digital
customer engagement and the physical retailing. Smart and interactive packaging (SIP) transforms
traditional passive packaging to internet-enabled devices supporting a range of interactions between
the brand, the product, the retailer and the customer (Ryynänen and Rusko, 2015; Blanco, 2018).
Technological enablers are printed electronics, (semi-) conductive inks, Internet-of-Things (IoT)
particularly networks like NFC, LoRa, Bluetooth LE, new forms of RFID tags, digital paper,
segmented retail digital network architectures, and augmented reality (Lydekaityte and Tambo,
2018; van Kerrebroeck et al., 2017; ten Cate et al., 2014).
With SIP it is possible to create a digital interactivity and personal adaptiveness of the individual
product including storytelling, game inspired features, user support, operational guidance, and
IAMOT 2019 | 82
Smart and Interactive Packaging—On Long Term Studies and Technological Enablers
similar interactive features of the product (Ryynänen and Rusko, 2015). Moreover there might
be established a clearer digital link between product, brand and consumer e.g. in forms of loyalty
programs or consumer guidance (Hunt, 2017; Venkatesan et al., 2015; Akkas et al., 2017; Blanco,
2018). Examples are internet-of-things based lids in bottles of beverages or detergents helping the
consumer but also feeding back to the brand.
This paper is discussing SIP as an emerging technology with characteristics of a high level
of uncertainty and risk in decision making although design opportunities are readily at hand. In
reviewing the technology as emerging, competing technologies, investment capabilities, operational
readiness and maturity must be brought in to question. The research question is: What are the key
characteristics of the development of smart and interactive packaging (SIP) in a management of
technology perspective (MoT) with special emphasis on forecasting of successful configurations for
a larger scale of commercial application?
2. Methodology
The methodology of this paper is ex-ante, qualitative, socially-inspired and placed between
technology studies and design science research (McKay et al., 2012). Design of based on platforms
of requirements, limitations and social and commercial opportunities and restrictions, design science
research is suggestion itself positively to establish necessary reliability when extracting findings
from studies of creation and shaping of technology (Baskerville and Storey, 2017). This paper is
seeking its point of departure in positive outcome of technological development as being based on
diverse and human-driven use of whatever tools at hand (bricolage) and the human ability to invite
and host feasible technology (xenia) (Ciborra, 2002). In the design science tradition, technology is
shaped and configured in environments of key actors interacting with adjacent actors in communities
were users and consumers are necessary participants and key determinants for success (Grobler and
Villiers, 2017). With Iivari (2017) design processes is “allowed” to have a lot of attention on shaping
of artefacts but this can’t take place without addressing the wider system surrounding the artefacts;
ideally a social artefacts must also be defined and placed in the context of the technological artefacts
and the (information) system.
The data collection for this paper has aimed at mostly secondary sources as the experience gathered
from full-scale experiments is limited following the nature of emerging technology studies. Key
sources for the empirical material found has been:
i. Websites of industrial conferences and trade fairs
ii. Industrial magazines, press releases, articles and case presentations
iii. Testing of product samples in our laboratory from Water.IO, Novalia and tagged labels
from selected label manufacturers
Critical to the empirical foundation is the limited information stated by the key actors in the fields
of base technologies (semiconductors, inks, glues, laminates, infrastructure), technology designers
(startups, allround IoT actors) and converters (final packaging manufacturers). Given the amount of
cases and the repeated types of empirical cases from several countries and industries a fundamental
reliability is asserted to the data.
IAMOT 2019 | 83
Managing Technology for Inclusive and Sustainable Growth
IAMOT 2019 | 84
Smart and Interactive Packaging—On Long Term Studies and Technological Enablers
This is somewhat in line with Grunert et al. (2011) emphasizing consumer involvement in product
development in the CPG sector. This is in turn also covering customer experience and design for
customer experience with a combination of “professional customers” such as focus groups and a
broader audience (Grewal et al., 2009). Liu et al. (2018) express this vagueness as the corporate
ability to improvise entailing issues like centralisation, formalisation in decision-making, resource
slack and investment irreversibility. Noh et al. (2018) propose to record and use data in the
assessment of technology and innovation feasibility. Lager (2017) is defining product development
to utilise a platform thinking.
Visnjic et al. (2018) discuss that tangible technology is largely to be co-considered with the
development of services. Services are necessarily connected to a service strategy and brought to
action via a service architecture defining actual services (Wittmann et al., 2014). Being a technology
“owner”, service strategies can sometimes be used for opening up for external stakeholders to provide
services under more or less regulated forms (Venkatesan et al., 2015). Technological innovation is
therefore in most case also a matter service innovation. In the actual case of SIP, retailers might see
themselves as service providers to the brand owner. The combination of products and services is
often referred to as a Product Service System (PSS), Olsson and Larsson (2009) underlines strong
potentials in seeing product innovation and packaging innovation as a whole using the philosophy of
PSS to ensure optimum experience for both retailer and consumer.
IAMOT 2019 | 85
Managing Technology for Inclusive and Sustainable Growth
basic circuitry will consist of a power source, most likely a battery and a photo voltaic (PV) cell,
some sensors e.g. for touching or environmental sensing, some “user interface” being anything from
digital paper resembling a smart phone to sending a signal to a smart phone. Eventually is some
“intelligence” needed in form of a chip with a processor and a radio module with an antenna. All
“passive” and wires components can be printed, and a great effort is put in improving conductive
and resistive inks. Active components are more difficult. In the case these can’t be printed, a range
of miniature microelectronic components are available to affix with conductive glue (Lydekaityte
et al., 2018; Fescioglu-Unver et al., 2015; ten Cate et al., 2014; Kiel et al., 2017).
IAMOT 2019 | 86
Smart and Interactive Packaging—On Long Term Studies and Technological Enablers
Figure 2: Water Bottle, Smart Lid, Instructions and APP From Water.IO
The Norwegian company Thinfilm is offering a range of solutions based on NFC. Showcases have
been the spirits industry were application has been in consumer engagement and experience with
e.g. story telling connected to whisky bottles, connecting tequila bottles to sponsored football games.
In cosmetics, the company showcases in-store consumer engagement, social media sharing, and a
drive to repurchasing. The company offers solutions for monitoring of glasses and containers with
medicine and food supplements that comply with food safety regulations for correct intake.
The Norwegian company Kezzler is designing codes solutions based on more technologies. A
specific area is serialisation meaning individual product item identification for tracking, verification
(anti-counterfeiting), integrity, supply chain data tracing, and potentially consumer engagement at
an individual level. Kezzler is describing how several elements of the value chain is addressed
in the form of e.g. Amcor is packaging producer, Toppan as ink manufacturer, SGS as test and
verification laboratory and WCO as the world customs organisations for fiscal application and
assurance purposes.
Selinko of Belgium is offering a range of NFC-based tags to be added in labels or in the capsule
of fluent products from beverages to soaps for anti-counterfeiting, opening detection, marketing
services and traceability. Focal industries for application are stated as spirits, wines, perfumes,
cosmetics, pharma, apparel, footwear, and consumer electronics.
EVRYTHNG is a UK-US company within Internet-of-Things aimed at a relatively broad range
of applications and solutions. In this context, EVRYTHNG is supplier to Diageo, Coca Cola, AB
InBev, Unilever, Thinfilm, Dom Perignon, GlaxoSmithKline, Mondelez of smart and connected
solutions for SIP. EVRYTHNG is working on a full technology stack with tags for most types of
networks and a range of infrastructure and analytical solutions.
Novalia is a UK-based company making printed electronics promotional and experiental products
combining touch-functionality, sound, rich graphics and Bluetooth-based connectivity. The
printed electronics can be make in any size. Figure 3 shows a A5 size. The electronics module is
“traditional” printed circuit boards glued to the conductive print. Any graphic and visual image
can be added on the surface as the example from Dunkin Donuts. Examples are also posted from
Hershey chocolate, Disney, Budweiser, and Pizza Hut. Novalia has developed is conductive inks
together with Cambridge University’s Graphene Centre expecting graphene as a carrier for metallic,
semiconducting and insulating nanoparticles.
IAMOT 2019 | 87
Managing Technology for Inclusive and Sustainable Growth
The Finnish packaging company of Stora Enso is offering a range of tagging solutions mostly
based on RFID technology embedded into its line of cardboard-based packaging materials. The
technologies are developed in partnership with the US chip designer NXP Semiconductors. The
company is emphasized the four key areas of application
i. Offline retail connectivity with Smart Shelf concept
ii. New product experiences
iii. Leaner supply chain management
iv. Towards a data-driven business model
Application and solution guidelines are branded under the name of ‘TaggedValue’ suggesting
application in four industrial areas being: Converters (of raw cardboard product), medical industries,
retail CPG, industrial products.
In 2011 the Active & Intelligent Packaging Industry Association (AIPIA) was founded in Utrecht. It
now has 1200+ members and partners all along the packaging value chain, such as
i. Packaging raw materials manufacturers like Dupont, 3M, DS Smith
ii. Retailers
iii. Brand agencies
iv. Global brand owners like MillerCoors, Unilever, Starbucks, Diageo, Estee Lauder,
Elizabeth Arden, Ferrero, Gilette, Godiva, Heinz, Johnson & Johnson, Procter & Gamble
v. Technology providers like STMicroelectronics, Esko, Elopak, HP
vi. Universities
AIPIA is posting industry information and held in 2018 the first congress and exhibition in Amsterdam
with around 300 participants. Topically the congress stated the areas of printed electronics, brand
protection, shelf life extension, augmented reality, mobile commerce, supply chain control, smart
labels, condition monitoring, consumer engagement and fighting waste.
Several large, traditional packaging manufacturers have over the last years announced inititatives in
the SIP field. Many announcements have had the form of partnerships with technology entrepreneurs
such as the above mentioned Water.io and Thinfilm. Table 1 presents a range of large packaging
companies, key technologies and partnerships.
IAMOT 2019 | 88
Smart and Interactive Packaging—On Long Term Studies and Technological Enablers
Figure 4: Four-Party Development with Base Technology, Technology Design and Brand Ownership
IAMOT 2019 | 89
Managing Technology for Inclusive and Sustainable Growth
To discuss the challenger position abover, there is below listed a number of uncertainties and
are found central to an antagonistic position. SIP is anticipated as a break-through technology
characterised by a high level of uncertainty. A listing of uncertainties includes:
1. Wireless. Will it be possible to represent trillions of network ID’s whereas most have
relatively short lifespan? Wireless infrastructures are designed for somewhat static and
somewhat limited amount of ID. New infrastructures are need although the Internet-of-
Things trends is partially paving the way.
2. Printed electronics. Sophisticated circuits that formerly only were possible to reproduce
on complex and highly precise fiberglass substrates have to be transformed into
cardboard, low grade polyethylene and paper. There is a high expectation that printed
electronics must be able to produce active components like batteries, PV-cells, similar
energy harvesting methods, displays and radio frequency elements. Some is simple.
Some is only demonstrated in laboratories.
3. Augmented reality. Can augmented reality offer attraction and excitement? AR is
interesting as it require no extra network ID’s and no connectivity as items are recognised
optically, but most solutions are more gimmicks than actual interactivity.
4. Retailers’ reception. Retailers are dependent on lowest possible level of complexity of
operations. SIP must be effortless to retailers to succeed, and existing solutions seems to
impose some level of complexity to retailers.
5. Consumer value. Do SIP offer relevant and valuable customer experience that corresponds
with the effort consumers need to pay to benefit? No larger study currently exists on SIP
specifically, but traditional non-interactive campaigns and customer outreach has often
proven successfully. Uncertainty might relate to the brand owners ability to transfer
traditional approaches into smart and interactive approaches.
6. Information infrastructure. No standards exists for an end-to-end SIP infrastructure.
Existing e-commerce solutions, digital marketing and loyalty systems, and general
internet backbone infrastructures might be offered, but are not optimised to efficient
operations in the SIP context.
7. Establishment of open service systems. As stated above, there is an eco-system on the
artefact level but not on the system level, this is a priori a weakness. EVRYTHNG offers
some infrastructure elements but this is not the same as an inviting open service systems.
Open service systems is a way of creating credibility and assurance of the investments
that stakeholders must add to SIP.
8. Waste. SIP add complexity to waste. Simple organic printed electronics and augmented
reality are solutions, but so far chips (semiconductors) are added to packaging materials
changing this from pure to blended waste by some stated as a garbage nightmare.
Environmental friendliness is an uncertainty.
A development position from here should call for a clearer strategy position, but the range of
uncertainties makes a clear strategy position disputable against a position based on eco-systems,
configurators and networks of innovators in line with Geels (2002), Grewal et al. (2009) and
Grunert et al. (2011). Lager’s (2017) position on establishment of platforms is sensible with an open
definition of platforms. Platforms can be smart technologies as well as the CPG itself.
SIP has since mid-2017 shown a remarkable momentum in the cross-section between technology
providers, packaging industry and brand owners. Consumers have shown “short time” acceptance
in the available larger cases e.g. alcoholic beverages related to events. The uncertainties seems also
have been addressed one-by-one especially by the technology designers in the first line. Packaging
converters seems first to take up major challenges from now on, and they are only on a limited scale
delivering the same span of solutions as the technology designers. An exception is Stora Enso’s
IAMOT 2019 | 90
Smart and Interactive Packaging—On Long Term Studies and Technological Enablers
Tagged Value initiative branded in the same style as e.g. Novalia, and also offering a range of
solutions to ranges of industry segments.
IAMOT 2019 | 91
Managing Technology for Inclusive and Sustainable Growth
is outlined as a natural succession to key elements of technology in modern fields of ubiquitous and
pervasive computing using the Internet-of-Things and RFID constructs as leading generations of
innovation and business modelling. With SIP there is not a ‘life and death’ or ‘burning platforms’
incentive for the innovation, it has just the elements of smarter retailing and smarter consumer
experience. However, given the emerging of cashier-less retailing or even unmanned retailing more
urgency might come sooner than later. In food and pharma SIP might be mandated if it can lead to
higher levels of assurance, consumer protection and other benefits to stakeholders. In parts of B2B
SIP is obvious for automated logistics, product verification and similar. In this study we aim at
distance ourselves from the areas of food, pharma and B2B, but focus on non-food CPG.
In this context, SIP is both relying on a range of emerging base technologies and business assumptions
leading to the about stated uncertainties, but SIP is also to be considered as an enabler for a much
broader eco-system in field of post-purchase. Customer loyalty can be extended more solidly into
the home. Third party services can benefit from the extended consumer outreach, e.g. maintenance
services, security services, value added services, reselling services, discarding services, and general
marketing services. SIP can add to the ‘data as gold’ perspective of giving consumers rewards from
making data available. In the tequila bottle example, data from SIP was used for customer loyalty,
but the reward was also vouchers for entering with a betting company.
By converting existing ‘analog’ and ‘visual’ technologies such as barcodes, QR-codes, scratchcards,
phone-response, coupons and give-aways to digital and networked items, Smart and Interactive
Packaging is a promising and emerging technology. Besides the analog technologies, SIP is based
on micro-networks, digital connectivity, printed electronics, augmented reality, graphene inks and
several enabling base technologies. There is a complex task from brand owners and designers in
configuring the technologies for value creation by the most of the range of stakeholders. With the
above presentations, the way onward is exemplified clearly by companies such as Novalia and
EVRYTHNG.
5. Conclusions
Smart and Interactive Packaging (SIP) represents a tremendous set of opportunities for brand owners
and retailers along with the changes of digital brand creation supported by meaningful technology
for consumers and broader stakeholders. Meeting just a fraction of the envisioned potentials will
transform retailing and consumption. A working eco-system exists now between base technology
developers, converters and technology designers. These join to make the packaging solutions for the
brand owner. Only a few have addressed retail and consumer infrastructures although EVRYTHNG
offers a range of “simple” infrastructures and analytical tools.
This paper has outlined SIP as a driven by a multiplicity of technologies with no clear and obvious
lead driver. SIP is with other words predominantly technology-driven. Applications and brands are
sought after. The technology has for 2017-2018 been characterised by the transfer of technologies
from start-ups and research environments to mainstream packaging industries. Further research aims
at capturing the forthcoming developments in technology, applications, infrastructures and value
creation.
Key characteristics of SIP have been found to be a wealth of technological choices and opportunities–
stated as configurations - with no clear lead technology. A MoT perspective is the SIP has been
highly technology-driven; from now on SIP has to aim at a more social and business dimension
to understand consumers, retailers and broader stakeholder’s desires and idiosyncrasies. A socio-
technical perspective is now what is to be lead driver needing to connect business and technology at
every stage. With the stated partners and customers of especially EVRYTHNG, Novalia, Thinfilm
and AIPIA, there are strong reason to expect that major breakthroughs are to be seen in scale within
the next 2 – 3 years.
IAMOT 2019 | 92
Smart and Interactive Packaging—On Long Term Studies and Technological Enablers
References
Affonso, R. C., Liu, Y., & Zolghadri, M. (2013). A global framework of activities integrating product & supply chain
design. IFAC Proceedings Volumes, 46(24), 505-510.
Akkas, A., Gaur, V., & Simchi-Levi, D. (2017). Drivers of Product Expiration in Consumer Packaged Goods Retailing.
Almquist, E., Senior, J., & Bloch, N. (2016). The elements of value. Harvard Business Review, 94(9), 47-53.
Baskerville, R., Kaul, M., & Storey, V. C. (2017). Establishing Reliability in Design Science Research.
Bergek, A., Jacobsson, S., Carlsson, B., Lindmark, S., & Rickne, A. (2008). Analyzing the functional dynamics of
technological innovation systems: A scheme of analysis. Research policy, 37(3), 407-429.
Bharadwaj, S. (2018). Demand Management and S&OP-Present and Future. The Journal of Business Forecasting, 37(1),
17-19.
Blanco, A. P. (2018). Artificial intelligence and the consumer packaged goods supply chain (Doctoral dissertation,
Massachusetts Institute of Technology).
Brem, A., & Voigt, K. I. (2009). Integration of market pull and technology push in the corporate front end and innovation
management—Insights from the German software industry. Technovation, 29(5), 351-367.
Bronnenberg, B. J. (2015). The provision of convenience and variety by the market. The RAND Journal of
Economics, 46(3), 480-498.
Ciborra, C. (2002). The labyrinths of information: Challenging the wisdom of systems: Challenging the wisdom of
systems. OUP Oxford.
Cousté, N. L., Martos-Partal, M., & Martínez-Ros, E. (2012). The power of a package: product claims drive purchase
decisions. Journal of Advertising Research, 52(3), 364-375.
Geels, F. W. (2002). Technological transitions as evolutionary reconfiguration processes: a multi-level perspective and
a case-study. Research policy, 31(8-9), 1257-1274.
Grunert, K. G., Verbeke, W., Kügler, J. O., Saeed, F., & Scholderer, J. (2011). Use of consumer insight in the new
product development process in the meat sector. Meat Science, 89(3), 251-258.
Fescioglu-Unver, N., Choi, S. H., Sheen, D., & Kumara, S. (2015). RFID in production and service systems: Technology,
applications and issues. Information Systems Frontiers, 17(6), 1369-1380.
Gerlach, R., Pinard, D., Weaver, M., & Alattar, A. (2015). Scanning-time evaluation of Digimarc Barcode. In Media
Watermarking, Security, and Forensics 2015 (Vol. 9409, p. 940907). International Society for Optics and
Photonics.
Grewal, D., Levy, M., & Kumar, V. (2009). Customer experience management in retailing: An organizing
framework. Journal of retailing, 85(1), 1-14.
Grobler, M., & de Villiers, C. (2017). Shaping solutions with a community: the research design using design science
research (DSR) and case study research with an ICT4D project.
Hunt, C. (2017). Understanding the Effects of Brand Label Attributes on Consumer Preference and Purchase Intentions:
An Exploratory Study of Multinational Food Brands (Doctoral dissertation, Concordia University).
Iivari, J. (2017). Information system artefact or information system application: that is the question. Information Systems
Journal, 27(6), 753-774.
Kiel, D., Arnold, C., & Voigt, K. I. (2017). The influence of the Industrial Internet of Things on business models of
established manufacturing companies–A business level perspective. Technovation, 68, 4-19.
Kim, B. J., Singh, V., & Winer, R. S. (2017). The Pareto rule for frequently purchased packaged goods: an empirical
generalization. Marketing Letters, 28(4), 491-507.
Kumar, S., & Ostor, C. (2004). CPG Food and Beverage Market Dynamics and Supporting Supply Chain Systems.
In Supply Chain Forum: An International Journal(Vol. 5, No. 1, pp. 50-63). Taylor & Francis.
Lager, T. (2017). A conceptual framework for platform-based design of non-assembled products. Technovation, 68,
20-34.
Lamey, L., Deleersnyder, B., Steenkamp, J. B. E., & Dekimpe, M. G. (2018). New product success in the consumer
packaged goods industry: A shopper marketing approach. International Journal of Research in Marketing.
Liu, Y., Lv, D., Ying, Y., Arndt, F., & Wei, J. (2018). Improvisation for innovation: The contingent role of resource and
structural factors in explaining innovation capability. Technovation.
Liles, D. (2009). Workflow and asset management for retail marketing and merchandising in the era of hyper-
localization and micro-messaging–An Interview with Doug Liles of Enterprise Solutions. Journal of Digital
Asset Management, 5(2), 83-89.
Lydekaityte, J., & Tambo, T. (2018). Business Perspectives of Smart Interactive Packaging: Digital Transformation of
Brand’s Consumer Engagement. In Proceedings of the 8th International Conference on Internet of Things
(pp. 1-4). Santa Barbara: Association for Computing Machinery.
IAMOT 2019 | 93
Managing Technology for Inclusive and Sustainable Growth
McKay, J., Marshall, P., & Hirschheim, R. (2012). The design construct in information systems design science. Journal
of Information Technology, 27(2), 125-139.
Noh, H., Seo, J. H., Yoo, H. S., & Lee, S. (2018). How to improve a technology evaluation model: A data-driven
approach. Technovation, 72, 1-12.
Olsson, A., & Larsson, A. C. (2009). Value creation in PSS design through product and packaging innovation processes.
In Introduction to product/service-system design (pp. 93-109). Springer, London.
Phaal, R., Farrukh, C. J., & Probert, D. R. (2004). Technology roadmapping—a planning framework for evolution and
revolution. Technological forecasting and social change, 71(1-2), 5-26.
Phaal, R., Farrukh, C. J., & Probert, D. R. (2006). Technology management tools: concept, development and
application. Technovation, 26(3), 336-344.
Primus, D. J. (2017). A configuration and contingency analysis of the development chain. Technovation, 64, 1-15.
Rebollar, R., Gil, I., Lidón, I., Martín, J., Fernández, M. J., & Rivera, S. (2017). How material, visual and verbal cues
on packaging influence consumer expectations and willingness to buy: The case of crisps (potato chips) in
Spain. Food Research International, 99, 239-246.
Rodriguez, T., Haaga, D., & Calhoon, S. (2015, March). Automation and workflow considerations for embedding
Digimarc Barcodes at scale. In Media Watermarking, Security, and Forensics 2015 (Vol. 9409, p. 940905).
International Society for Optics and Photonics.
Rohrbeck, R., & Gemünden, H. G. (2011). Corporate foresight: Its three roles in enhancing the innovation capacity of a
firm. Technological Forecasting and Social Change, 78(2), 231-243.
Rohrbeck, R., Battistella, C., & Huizingh, E. (2015). Corporate foresight: An emerging field with a rich
tradition. Technological Forecasting and Social Change, 101, 1-9.
Ryynänen, T., & Rusko, E. (2015). Professionals’ view of consumers’ packaging interactions–a narrative
analysis. Packaging Technology and Science, 28(4), 341-355.
Serrano Tierz, A., Rebollar Rubio, R., Lidón López, I., & Fernández Sora, A. (2011). experiential levels of CPGs
(Consumer Packaged Goods) using 3D modelling. Proceedings of the IMProVe 2011 International
conference on Innovative Methods in Product Design
Steenis, N. D., van Herpen, E., van der Lans, I. A., Ligthart, T. N., & van Trijp, H. C. (2017). Consumer response to
packaging design: The role of packaging materials and graphics in sustainability perceptions and product
evaluations. Journal of Cleaner Production, 162, 286-298.
ten Cate, A. T., Gaspar, C. H., Virtanen, H. L., Stevens, R. S., Koldeweij, R. B., Olkkonen, J. T., ... & Smolander, M.
H. (2014). Printed electronic switch on flexible substrates using printed microcapsules. Journal of materials
science, 49(17), 5831-5837.
Van Kerrebroeck, H., Brengman, M., & Willems, K. (2017). When brands come to life: experimental research on the
vividness effect of Virtual Reality in transformational marketing communications. Virtual Reality, 21(4),
177-191.
Venkatesan, R., Farris, P., Guissoni, L. A., & Neves, M. F. (2015). Consumer brand marketing through full-and self-
service channels in an emerging economy. Journal of Retailing, 91(4), 644-659.
Visnjic, I., Neely, A., & Jovanovic, M. (2018). The path to outcome delivery: Interplay of service market strategy and
open business models. Technovation, 72, 46-59.
Wittmann, C. M., Nowicki, D. R., Pohlen, T. L., & Randall, W. S. (2014). Service-dominant logic and supply
chain management: are we there yet?. International Journal of Physical Distribution & Logistics
Management, 44(1/2), 113-131.
Zhu, X., Mukhopadhyay, S. K., & Kurata, H. (2012). A review of RFID technology and its managerial applications in
different industries. Journal of Engineering and Technology Management, 29(1), 152-167.
IAMOT 2019 | 94
Open Innovation Learning: from Concepts
to Targeted Competences
Marche Brunelle
University of Lorraine, Nancy, France
E-mail: brunelle.marche@univ-lorraine.fr
Enjolras Manon
University of Lorraine, Nancy, France
E-mail: manon.enjolras@univ-lorraine.fr
Boly Vincent
University of Lorraine, Nancy, France
E-mail: vincent.boly@univ-lorraine.fr
Abstract
Open innovation represents a present major strategy for companies aiming a development dynamic based on
novelty. Open innovation highlights the concept of networking as enterprises position themselves in an inside
and outside double process of knowledge acquisition and diffusion to foster their own new activities development
and possibly those of their partners. This co-innovation approach may involve close known partners (customers,
suppliers, regular interlocutors among others), entities purposely contacted (this includes academic structures
specifically associated to a project, distant companies holding complementary know how and start-ups) and
also occasional or fuzzy contributors (members of social networks, specialist mobilized by internet innovation
intermediaries among others). Open innovation is associated with some theoretical problematic including the
question of the necessary abilities of people in charge of this process. Beyond the technology and business
competencies required within any innovation process, this paper focuses on possible complementary skills linked
with the plurality of structures involved. The aim is to elaborate a competence’s list of reference dedicated to people
piloting open innovation, and, to test this referential through new learning modules.
The first step of the research consists in testing the hypothesis of the existence of specific open innovation
management abilities. Based on a literature review and considering the work of the standard organization) in the
field of innovation management (ISO/TC279), the research focuses on sensing practices that are typical of open
innovation dynamics. These practices are then linked with a set of competences (knowledge and know how) thanks
experts and company members interviews and according to a bibliographic analysis. Hence a competence referential
is proposed for open innovation managers.
In a second step, this referential has been valorized to design a new pedagogical module added to the syllabus of
the Ecole Nationale Supérieure en Génie des Systèmes et de l’Innovation (ENSGSI) a French engineering school
dedicated to innovation and management of technology. The paper gives the results of a two years’ experience
about open innovation learning with students at final engineering level (master degree). The module uses the
pedagogical concept of formative assessment: five evaluation sequences are integrated to the module. Each
associating the students themselves, professors and employees of companies applying open innovation strategies.
This transverse assessment is discussed all along the module by these three groups of people involved in order to
get a continuous feedback.
The outcomes of this evaluation process are detailed and analysed in constructivist terms: do the module gives
students new abilities and are the competencies adapted to the launching phase of an open innovation process?
In conclusion, the hypothesis of specific abilities relating to open innovation is validated. But the generic status
of each of the competencies seems questionable. The wide range of openness situations suggests a necessary
contextualization when identifying the pertinent targeted competencies of open innovation managers.
Keywords: Open Innovation, Partnership, Competencies, Learning
1. Introduction
The way innovation is managed attests of a strong evolution in some companies. New concepts are
achieved: open innovation, open innovation, co-design, cooperation among others. Many companies
IAMOT 2019 | 95
Managing Technology for Inclusive and Sustainable Growth
no longer limit themselves to their own resources to engage in innovation. Open innovation consists
in using external contributors to innovate (Chesbrough et al., 2014). Innovation is then based on
partnerships of different forms in terms of: type of the partners and degree of proximity (Boly et
al., 2016). There are associations between companies and technical centres (public, private) or
partnerships between companies. One example is the collaboration between Renault and Bolloré for
the development of electric cars. In this case, the contributors are close and known to the considered
company (a technical centre, a university, another company). There are other situations where the
company is forging links with more distant and not always initially well-known partners. This type
of relationship is found when the company joins a cluster, transnational programs or any form of
consortium. Trust and mutual knowledge increase as the importance of joint work increases. Let us
mention the particular case of companies like Veolia, opening a website where any company can
propose a request for association by presenting an innovative concept. Finally, in some cases, the
contributor is unknown to the designer, for example in cases where an individual provides knowledge
or technical services without requiring a contractual framework or sometimes remuneration. Hence,
it is possible to conduct acceptability studies by associating with social networks. Finally, innovation
sometimes emerges within communities of individuals who themselves exploit novelty or set up
a total sharing approach. Avast the famous antivirus is a freeware developed by a community of
computer scientists. In addition, material object-oriented communities are developing like FabLab
networks, for example.
Thus, open innovation attests of a wide range of organizational forms federating the partners: from
gentleman agreement, contracts, common company creation like joint venture, patent selling to
informal collaboration. Figure 1 provides a representative framework for these different forms of
collaboration. Descriptive variables include the monetary dimension (Chesbrough and Brunswicker,
2014), the autonomy of partners in strategic decision-making (Jolly, 1995; Okongwu, 2015), the
difficulty in finding the knowledge or complexity of the problem to be solved (Felin and Zenger, 2014).
This first representation gives an overview of the specificities of open innovation management for
professionals. Therefore this research aims to identify these specificities, first in the form of practices
and then in the form of skills to be acquired for future project managers in open mode.
IAMOT 2019 | 96
Open Innovation Learning: from Concepts to Targeted Competences
knowledge with the environment (West, 2014). The question is then raised as to how to implement
this innovation dynamic within companies. Chiaroni et al (2011) suggest that open innovation induces
a progressive change (awareness, implementation of actions and institutionalization) according to
four dimensions: external networks, internal organization of companies, performance evaluation
methods and the implementation of knowledge management systems. Other authors propose that the
company has to take on six challenges in relation to open innovation, noting that these challenges
remain permanent regardless of the company’s experience (Chesbough and Brunswicker, 2014):
●● Managing people against the NIH (Not Invented Here),
●● Protecting key internal knowledge,
●● Identification external sources of innovation,
●● Managing Intellectual Property,
●● Managing the interrelationships between partners,
●● Managing change.
These activities are in line with findings of Benham et al (2018) about the importance of networking,
competence mapping and relational capabilities. Felin and Zenger (2014) highlight three areas where
particular governance needs to be put in place: modes of communication between contributors,
“incentives” to stimulate collaboration and intellectual property. Open innovation is often facilitated
by strong intellectual property rights (IPRs), but it may also function, and even be boosted, when
firms deliberately waive some of their IPRs (Henkel et al., 2014). Santoro et al (2018) establish a
link between the ability to collaborate and the existence of knowledge management systems. They
also emphasize the climate of trust established between partners.
In the managerial field, Bogers et al (2018) indicates that employees’ educational diversity is
positively associated with firm-level openness, attesting of the role of human resources management
in the adoption of open innovation. Finally, limiting the negative impact of “Not invented here” and
“Not Shared here” syndromes is one of the tasks of open innovation managers (Araújo Burcharth
et al., 2014).
Table 1: Main Practices for Managing Open Innovation
Thus, there is no single method for adopting open innovation suggesting that the concept of best
practices adapted to the company’s context may be pertinent. The notion of engineering and/or
open innovation management are proposed aimed at setting up a relevant open innovation process
IAMOT 2019 | 97
Managing Technology for Inclusive and Sustainable Growth
at a given moment. Then, in this paper, the problematic consists in identifying the skills to design,
implement, manage and renew this dynamic of openness. More precisely, the aim is to determine
additional skills required complementary to those generally dedicated to so-called “closed”
innovation. This body of knowledge could then be used to build job profiles for open innovation
managers and consider specialized training modules.
Competency mapping,
Mapping the skills of partners
Models of the future supply chain of the innovative product
IAMOT 2019 | 98
Open Innovation Learning: from Concepts to Targeted Competences
The practices and observable phenomena have been classified into seven categories: partnership, intellectual
property, product co-design, communication, value, knowledge management and internal management.
Experts propose observable elements in the form of:
●● documents such as contracts,
●● equipment, such as collaborative platforms,
●● actions that can be proven such as training,
●● financial flows such as co-investments.
Some of these phenomena are mentioned by all the experts: the establishment of a climate of trust among
others. Some are more specific: awarding corresponds to projects with individual external contributors.
The mastery of foreign languages is related to projects involving partners from different countries.
One of the key points of this approach is the distinction between the collaborative aspects and the
closed innovation management skills. To do this, previous research describing job-skills innovation
frameworks are used (Boly et al., 2014-2017). Common competencies between the two approaches
were excluded from the analysis. Thus, the required competency profile is therefore all the knowledge
relating to the control of observable phenomena.
The aim here is not to obtain an exhaustive list: this research has not yet been finalized. Table 2
obviously needs to be consolidated by a broader literature review, additional contacts with experts
and also observation campaigns.
IAMOT 2019 | 99
Managing Technology for Inclusive and Sustainable Growth
candidates (companies capable of manufacturing and/or selling the innovative product designed)
and validate this choice with experts. More precisely, the aims are:
●● Validate that these skills, considered specific to open innovation, are well observed
among participants and that they are mobilized throughout their project,
●● Observe the evolution of these skills over time: does the training module make it possible
for participants to evolve? Can progression profiles be identified reflecting correlations
between the reference skills?
The test took place at the ENSGSI (Ecole Nationale Supérieure de Génie des Systèmes et de
l’Innovation) in Nancy (France). The module was followed by eleven engineering students at the end
of the cursus. It takes into account the courses already taken by these students. Thus, the following
practices have not been evaluated:
●● Intellectual property: the students have a course module on this point. It was just observed
their ability to consult patent and standards databases,
●● Internal management: these students have a solid background in change management
and have attended numerous project management training workshops,
●● Knowledge management: this domain is a module in itself within ENSGSI.
One the other hand, in line with our special interest, partnership skills category is divided into three
sub categories: partner’s selection (“Partnership”), international partnership (“international “) and
supply chain design (“Supply chain”).
Finally, it should be noted that some of the students used the Fab Living Lab at ENSGSI during the module.
This training module took place over 5 days (Figure 2). Each day was dedicated to a specific theme:
1- Product/service development, 2- Channel design partnerships, 3- Value creation and business
model, 4- International strategy and finally 5- Valuation, presentation of results. Each day began with
a self-assessment of the students regarding the proposed competency framework (“self-assessment”
blocks on the figure). A lecture on the day’s theme was then proposed, followed by a team work time
during which the teaching team was present to help the student’s progress in their projects. Finally,
an evaluation by an external expert was carried out in person or at a distance following an exchange
time with each group of students on the day’s theme (“exchanges with expert” blocks on the figure).
Day 5 ended with the final jury where the students presented all their results to 3 industrial experts
and the teaching team.
Evaluation by experts X
Self-assessment X
Jury X
Table-top examination X
6,00 6,00
5,00 5,00
targeted score
1,00 1,00
0,00 0,00
Conception
Product de Conception
Supply de Stratégie de
Partnership
Proposition
Value de Stratégie
International Communication
Communication
co-design
produit chain
filière partenariats creation
valeur strategy
internationnale
design
In general, Figure 3 shows a positive evolution of all the competencies considered. However, the
progression profiles are more or less linear.
The product design skill shows the most linear progression. The initial assessment of students is one
of the highest (almost 4).On the other hand, it is interesting to note that the pedagogical threshold
has not been reached. Indeed, the teaching team is rather demanding on this dimension, because
students have already acquired experience during their university studies strongly oriented towards
the development of new products/services. It therefore seems consistent that the threshold to be
reached should be high. However, the students were not able to reach it and this can be explained in
particular by a lack of time, and by a focus on other skills.
For similar reasons, the threshold of the die design dimension is not reached, although very close.
However, students started from a much lower initial assessment.
The thresholds defined for the other competencies are all met, including those where students
consider that they were starting from a low level of maturity (value proposition and international
strategy). This is an interesting result that suggests a good match between the content of the module
and the expectations of the teaching team.
Note that between the Day 1 and on day 2, there was a regression on the majority of the competencies
assessed. It seems that the students overestimated themselves slightly when the module was launched,
and finally returned to their position after the first day of work and the first exchanges with an expert.
The communication dimension in particular suffered a sharp drop.
Finally, the progression profile of the international strategy dimension shows a particularity due
to its late evolution. Indeed, student evaluations are relatively stable during the first 4 days, then
a strong increase appears on days 5 and 6. This indicates that the international aspects of open
innovation have been left out at the beginning of the module, which potentially reflects on the part
of students a non-integrative vision of the international in the construction of their project. This
compartmentalization of the international aspect can also be explained by the fact that students
were relatively new to this theme, so the trigger for their progress could be the intervention of an
international expert (in day 4), which would explain their late evolution.
The question of the impact of expert presentations is indeed a variable to be considered in the
students’ progress during the module. Figure 4 shows the student progress profile (self-assessment)
by day and dimension. It is therefore possible to visualize the impact of expert interventions on
student development.
In view of the students’ background and experience, no expert presentation has been scheduled
concerning the product dimension. Despite this, the evolution profile shows a continuous progression
with the highest final evaluation.
The supply chain dimension shows a slightly different profile, with stagnation between day 1 and the
beginning of day 2. Then, following the lecture dedicated to this theme during day 2, the progression
becomes stronger, before stagnating again on Day 6. Thus, the impact of the lecture on progression
seems particularly strong here and allows students to move from a relatively low initial level (level
3) to a final level among the highest (almost 5).
The observation is relatively identical on the partnership dimension. A regression appears in Day
2 but following the presentation of an expert, the evolution starts to increase again until day 6.
However, a very slight decline appears again between days 4 and 5. This transition is marked by
the intervention of an international expert. Thus, it can be assumed that the students’ progress
regarding partnerships has been hampered by their awareness and confrontation with the difficulties
of internationalization. This potentially reinforces the hypothesis that the international has been
considered in a non-integrative way. Its late inclusion seems to have a direct impact on other
dimensions, including partnerships.
The evolution of the international dimension shows, once again, the strong impact of the expert
presentation on the progress of students. The students start from a very low level of maturity, decline
between Day 1 and Day 2, then after a slight progression, the expert gives a strong impetus allowing
the students to exceed maturity level 4.
The Value Creation dimension shows a slightly different profile. A strong increase appears between
day 2 and day 3. However, the expert speech took place on day 3, and seems to have had a moderate
impact. The strongest incentive was therefore given before this lecture. This potentially highlights
a correlation between the “value creation” dimension and the “partnership” dimension, and/or the
supply chain design dimension whose interventions took place on Day 2. The final evaluation of this
dimension is the lowest (close to level 4).
Finally, the Communication dimension shows a high initial evaluation, significantly reduced on
Day 2. This sharp decrease can be explained by an overestimation of the maturity of students at
the beginning of the module, which was then qualified in view of the difficulties encountered, in
particular during the first evaluation by the pairs at the end of the day 1. This first confrontation may
have surprised the students, especially since they had to make a feedback highlighting the substance
of their project, but taking a professional form (pitch). It would seem that after the surprise of this
type of format, the students became familiar with interactions/evaluation. Their evolution return to
the initial level in 3, then stagnates until Day 5 before experiencing a new progression in Day 6,
following the final jury.
Thus, Figure 4 shows a strong influence of expert presentations on the Supply chain, Partnerships
and International dimensions. The value creation dimension seems to be more impacted by supply
chain and/or partnership lectures than by the one dedicated to the business model. Finally, the
communication dimension shows a particular development profile, which is highly dependent
on the evaluations carried out by the experts at the end of each day. The difference between the
initial and final level is relatively small and seems to be mainly due to the influence of the final
jury during Day 5.
In addition, the relevance of judging oneself on these criteria during the implementation of a
project with a participatory dimension appeared consistent to the participants. If the validation of
the developed reference system remains to consolidate, the relevance of the proposal is attested.
It is therefore possible to identify skills specific to open innovation. These must be considered
as complementary to a general education in innovation, and ENSGSI students have 107 ECTS
in the specialty “innovation management” during their three years of study. Some specific skills
relates to the outcomes of the common projects that have to be shared. Thus inter companies
negotiation competence is highlighted. Some others skills relate to the management of the cluster
and the supervision of the activities of the group: partnership and communication. Finally: some
skills are connected with the possible consequences of the clustering on people inside the company.
This research will have to be complemented by further experimentation and the opening to a
professional audience. In addition, to specify the evaluation criteria and to further objectify the
rating, maturity grids will be defined for each of the practices and observable phenomena. Finally, it
should be noted that a comparison with the ISO standard on innovation management will be carried
out, knowing that a first analysis confirms the consistency of Table 2.
The question arises as to how to better define the targets of these competency tables. They should
depend on the organization set up in the companies individually and collectively. Among these
targets should be distinguished contributors, project managers and decision makers among others.
References
Araújo Burcharth A, A. L., Knudsen, M. P., Søndergaard, H. A. (2014). Neither invented nor shared here: The impact
and management of attitudes for the adoption of open innovation practices. Technovation, 34(3), 149-161.
Behnam, S., Cagliano, R., Grijalvo, M. (2018). How should firms reconcile their open innovation capabilities for
incorporating external actors in innovations aimed at sustainable development?. Journal of Cleaner
Production, 170, 950-965.
Bogers, M., Foss, N. J., Lyngsie, J. (2018). The “human side” of open innovation: The role of employee diversity in firm-
level openness. Research Policy, 47(1), 218-231.
Boly, V., Camargo, M., Morel, L. (2016). Innovation Engineering. Lavoisier, Hermes, Paris.
Boly, V., Camargo, M., Morel, L (2017) Innovation management: twenty-three years of higher education in a French
engineering school, in LI Ragioni di erasmus, n°1, edition Roma Tre.
Boly, V.,Morel L., Assielou G., Camargo M., (2014) Evaluating innovative processes in french firms: methodological
proposition for firm innovation capacity evaluation, Research Policy, Volume 43, Issue 3, p 608-622.
Chesbrough, H., Vanhaverbeke, W., West, J. (2014). New frontiers in open innovation. Oup Oxford.
Chesbrough, H., & Brunswicker, S. (2014). A fad or a phenomenon?: The adoption of open innovation practices in large
firms. Research-Technology Management, 57(2), 16-25.
Chiaroni, D., Chiesa, V., Frattini, F. (2011). The Open Innovation Journey: How firms dynamically implement the
emerging innovation management paradigm. Technovation, 31(1), 34-43.
Felin, T., Zenger, T. R. (2014). Closed or open innovation? Problem solving and the governance choice. Research
Policy, 43(5), 914-925.
Henkel, J., Schöberl, S., & Alexy, O. (2014). The emergence of openness: How and why firms adopt selective revealing
in open innovation. Research Policy, 43(5), 879-890.
Jolly, D. (1995). The Field of Intercompany Alliances. Management, 20 (4): 40-47.
Lemoigne JL: «La Théorie du Système Général», PUF, 1983.
Okongwu, U., Brulhart, F., Moncef, B. (2015). Causal linkages between supply chain management practices and
performance: a balanced scorecard strategy map perspective. Journal of Manufacturing Technology
Management, 26(5), 678-702.
Santoro, G., Vrontis, D., Thrassou, A., & Dezi, L. (2018). The internet of things: building a knowledge management
system for open innovation and knowledge management capacity. Technological Forecasting and Social
Change, 136, 347-354.
Serres M, Farouki N. (1997) : «Le dictionnaire des sciences - le trésor», Flammarion, Paris.
West, J., Salter, A., Vanhaverbeke, W., & Chesbrough, H. (2014). Open innovation: The next decade.Elsevier edition Oxford.
Vineeta Khanapuri
Dwarkadas J. Sanghvi College of Engineering,
Vile Parle (W), Mumbai–400056
E-mail: vineetakhanapuri@gmail.com
Abstract
The purpose of this review is to discuss about glaucoma, the evolution of nanotechnology and its potential
diagnostic and therapeutic applications in the field of ophthalmology. Glaucoma refers to a group of eye
conditions that get developed when too much fluid pressure builds up inside of the eye i.e. intraocular pressure.
Increased IOP may lead to damage of the optic nerve and the optic nerve communicates visual information to the
brain. The continuing damage of the optic nerve will eventually lead to loss of vision and if it is left untreated, can
result in total blindness within a span of time.
In several cases, high IOP is secondary to trabecular meshwork dysfunction. The high IOP leads to compaction of
the lamina cribrosa and it causes subsequent damage to retinal ganglion cell axons.
Glaucoma affects 1 in 200 people who are 50 years old or younger and 1 in 10 people who are over the age of 80.
According to the statistics worldwide, Glaucoma is the second leading cause of blindness after cataract. With early
detection and proper medical treatment, it’s possible to slow the progression of Glaucoma.
There are several types of glaucoma. The two main types are open-angle and angle-closure. These are marked
by an increase of intraocular pressure (IOP), or pressure inside the eye. Trabeculectomy is currently considered
the standard filtration procedure for glaucoma. This technique causes numerous and unpredictable postoperative
complications, including hyphema, anterior chamber inflammation, excessive filtration leading to hypotony.
The only documented method to slow or halt the progression of this disease is to decrease the IOP, accurate IOP
measurement is equally crucial for the management, as it is for diagnosis.
The traditional IOP measurement method can be superseded by a Strain Gauge Pressure Sensor. From the
development of IOP sensors with strain gauge sensors to flexible components with integrated sensor and manometer
devices, the sensors have evolved through generations. Currently, In order to measure the IOP, the most common
method used is Applanation Tonometry, which is performed using Goldmann Applanation Tonometer.
This study details the treatment of open angle glaucoma, as of how the advancing technology of bio-markers
advances over the conventional technologies i.e. invasive and non-invasive. The challenges towards the
development and adoption of new technology is outlined and potential solutions for acceptance will be proposed.
Keywords: Glaucoma, Open-angle Method, IOP Sensor, Applanation Tonometry
1. Introduction
Inclination towards glaucoma seems to be inherited from birth but may not show up until later
in life. In most of the cases the disease produces increased pressure within the eye. This elevated
pressure is caused by a backup of fluid in the eye can damage the optic nerve, which transmits
images to your brain. Glaucoma is a group of eye diseases which over time, it causes damage to
the optic nerve. It has been predicted that by the year 2020, OAG will affect more than 50 million
people worldwide[1]. With the progression in damage, glaucoma results towards permanent vision
loss. Without treatment, glaucoma can cause total permanent blindness within a few years. Often,
due to the high pressure in the eye, an eye specialist can help tell the type of glaucoma and the best
treatment for it. The most common types include.
Source: https://www.glaucoma.org/
(CNVs) and polymorphisms, could contribute towards the pathogenesis of OAG. Till this date, more
than 20 genetic loci have been implicated in the development. Linkage analysis has been used for the
identification of two POAG-causing genes, which are, optineurin (OPTN) and myocilin (MYOC).
Usually, more than 70 MYOC mutations have been noticed to contribute to the pathogenesis of
OAG and OPTN mutations have been linked with normal tension glaucoma. In OAG, there are
characteristic optic nerve damage associated with open angles that is the area between the iris and
cornea and elevated eye pressure. This is usually in contrast to other types of glaucoma, which are
often considered with abnormal angles.
The exact cause of primary open-angle glaucoma is still unknown. Certain related genes describing
association with glaucoma. Besides, additional research is underway to study these genetic factors.
Identification of any sort of family history of glaucoma is often seen helpful.
Source: https://www.semanticscholar.org
Several risk factors for open-angle glaucoma are:
1. Age: Glaucoma is more common as we age.
2. Race: Africans have been observed with descent get glaucoma more frequently and at
much younger age than Caucasians.
3. Heredity: It is important to know the family history as some cases of glaucoma maybe
hereditary.
4. Corneal Thickness: An eye specialist usually measures the corneal thickness using
specialized instruments. Moreover, thin corneas are usually associated with a higher risk
for glaucoma, also the stiffness of the cornea matters and less stiff corneas are associated
with high glaucoma risk.
5. Myopia (nearsightedness): Diabetes mellitus and hypertension often are associated
with glaucoma.
6. Elevated Intraocular Pressure (high IOP): Higher the pressure, the risk of developing
glaucoma becomes higher. Average eye pressure ranges from 10-21 mm Hg. Not all
people with a pressure in the 20s will develop glaucoma and conversely, people with eye
pressure at the lower range can rapidly cause progressive glaucoma.
3.1.1. Medications
This kind of treatment is usually done for the patients with mild to moderate glaucoma and to
start the treatment with once-a-day prescribed eye drops. There are many safe, effective options
and most side effects are temporary, such as redness or irritation after using the drops. The most
common drops are categorized under the class as prostaglandins, which are considered to be safe
and effective in lowering the pressure down. Some examples are Travatan Z (Travoprost), Lumigan
(bimatoprost), Xalatan (latanoprost) and Zioptan (tafluprost). Other types of glaucoma medications
may also include alpha agonists and carbonic anhydrase inhibitors. Most people with glaucoma
usually need to take two different eye drops to reach their target pressure. Some patients can take
one drop that combines multiple drugs, such as Combigan (timolol and brimonidine) or Simbrinza
(brinzolamide and brimonidine) and Cosopt (timolol and dorzolamide).
Source: https://www.cehjournal.org/
4. On-Going Research
As all the treatment options discussed have been efficient up to 75-80%. A lot of research is doing on.
Doctors and researchers are working upon building different IOP sensors and review of biomarkers
for the treatment of Glaucoma.
4.3. Biomarkers
In vivo cross-section imaging, during an annual comprehensive eye exam were conducted for
glaucoma and macular degeneration, along with cross-section imaging, it uses Optical Coherence
Tomography, which demonstrates to show deficits that are specific to Alzheimer’s Disease and
Cognitive Impairment. The deficits are usually in the form of nerve fiber layer tissue drop in the
retina and optic nerve. The loss of nerve fiber layer tissue in the retina and optic nerve may be an
early biomarker of AD[6]. One such key component of ECM is in the TM which is proteoglycans,
these are macromolecules that consist of a core protein to which glycosaminoglycan side chains
are covalently attached. This class of molecules has also been implicated in the maintenance of
resistance to aqueous humor outflow, by Barany ever since he demonstrated that the perfusion of the
anterior chamber is with the testicular hyaluronidase which greatly reduced the outflow resistance
in enucleated bovine eyes in the 1950s[7]. In these TM tissues, proteoglycans form gel-like networks
seem to function as a gel-filtration system.
5. Conclusion
There have been various methods for the treatment of glaucoma and particularly open angle
glaucoma as it affects most of the people as they age. With this as understanding we saw how
the current methodologies have been towards the treatment of intraocular pressure. Also the
advancing technology in the field of ophthalmology, such as nano-medicine and bio-markers help
in advancement over the conventional technologies i.e. invasive and non-invasive and bring out
better efficiency and optimal results for the patients helping them lead their life comfortably with
respective vision.
The outcome observed for childhood, infant glaucoma and secondary glaucoma is perceived as
very much dependant on the type of glaucoma present and the associated diseases or conditions.
As we know, congenital glaucoma is present since birth and it yields into poor outcome for the
child than as seen in infant glaucoma, which potentially develops over the first few years of life.
Nowadays, childhood and infant glaucoma often result in poor outcomes than seen in adult glaucoma
as there is higher damage to the visual system, which is still undergoing development.
References
https://www.brightfocus.org/glaucoma/article/glaucoma-facts-figures
Open-angle glaucoma HANS GOLDMANN Berne; Brit. J. Ophthal. (I972) 56.
Risk Factors for Open-angle Glaucoma; M. Cristina Leske, MD, MPH; A.M.S. Connell, MB, ChB, FRCS, FCOphth;
Suh-Yuh Wu, MA; Leslie G. Hyman, Ph.D Andrew P. Schachat, MD;
Argon Laser Therapy for Open-Angle Glaucoma James B. Wise, MD, Stanton L. Witter, MD Jun;107(6):1171-7. 2.
Houde M., Castilloux AM, Tingey D., Assalian A., LeLorier J. Prescription of topical antiglaucoma agents
for patients with contraindications to beta-blockers. Can J Ophthalmol. 2003 Oct;38(6):469-75.
Biomarkers in primary open angle glaucoma Haris Kokotas 1, Christos Kroupis 3, Dimitrios Chiras 4, Maria Grigoriadou
1, Klea Lamnissou 2, Michael B. Petersen 1 and George Kitsos 4
Alzheimer’s Disease and Glaucoma: Imaging the Biomarkers of Neurodegenerative Disease Denise A. Valenti;
SAGE-Hindawi Access to Research International Journal of Alzheimer’s Disease Volume 2010, Article
ID 793931.
https://www.myvmc.com/diseases/glaucoma
Fan B.J., Leung Y.F., Wang N., Lam S.C., Liu Y., Tam O.S. et al. Genetic and environmental risk factors for primary
open-angle glaucoma. Chin Med J (Engl). 2004; 117(5):706-10
Leske M.C. Open-glaucoma–an epidemiologic overview. Ophthalmic Epidemiol. 2007; 14(4):166-72.
Ophthalmology. What you can do to protect your eyes. Harvard Health Letter. 2001; 26 (12):1-3
Lloyd Boustead
Department of Engineering and Technology Management,
University of Pretoria, South Africa
Marthinus W. Pretorius
Department of Engineering and Technology Management,
University of Pretoria, South Africa
E-mail: tinus.pretorius@up.ac.za
Abstract
Traditionally spinal implants are not specific to each patient and the surgeon only has a selection of pre-machined
devices from which to choose the closest fit. Additive manufacturing, however, allows for the production of unique
geometries that far exceed conventional machining. With this in mind, there is a possibility that 3D-printing
can be used in the field of spinal orthopedic surgery to obtain a patient-specific implant device. In an initial
study of the literature it is evident that experimental case studies have been performed with the use of additive
manufacturing in the field of spinal orthopedics. It seems that on an international level the technology is already
making progress. There appear to be some advantageous results and applications of 3D-printing in this field, more
specifically with the use of spinal orthopedic patient-specific implants. However, it is believed that South Africa
lags far behind with respect to the adoption of this new technology. The research question therefore focuses on the
possible adoption of 3D-printing in the South African field of spinal orthopedics. Following a review of the current
literature, a conceptual research model was developed to create a foundation through which the research question
could be answered. The model linked the three major role players, namely the potential patient, the surgeon and the
manufacturer. A sample group was interviewed with the purpose of testing, exploring and contributing toward the
proposed model. The interviews with the three research groups identified in the first place the important decision
parameters for each role player to possibly adopt the new technology but also highlighted potential risks thereof.
Because the study encompasses a technology that is in the inception phase of its life cycle, it was important that
certain aspects on how to further commercialize the technology were highlighted. From the findings a refined model
was created. The model is analysed to present a means by which to adopt this technology in the South African field
of spinal orthopedic surgery.
Keywords: Technology Adoption, 3D-printing, Health Technology, Spinal Orthopaedic, Patient-specific Implant
1. Introduction
Evidence suggests that the relative advantage of the risks and benefits contained in the
introduction of a new innovation into the market is a key element, also in the health industry
(Van der Watt and Pretorius, 2008). The aim of orthopaedic surgery is to improve the lives of
patients who have a specific problem with the anatomy of their bone structure whether it be a
deformity or created by injury. Orthopaedic surgery involves the rectification of bone injury or
deformity. In many cases the orthopaedic surgeon will use a pre manufactured orthopaedic implant
to aid in correcting the deformity or injury of the bone. The field of orthopaedics also involves the
correction or replacement of soft tissue joints between the bones by using an artificial joint. One of
the sub-fields of orthopaedics is spinal orthopaedics. Spinal orthopaedics involves the correction of
spinal deformity and injury typically with the use of joint fusion or arthroplasty. To correct spinal
deformity or injury, many different types of implants are used. Typically the joint is removed and
replaced with a fusion device or artificial joint. These implants are manufactured from biocompatible
materials. Commonly, titanium is used due to its superior mechanical and biocompatible properties
(Saprykin et al., 2016). In South Africa these implants are typically manufactured using machining
methods such as computer numerical control, wire cutters and milling machines. This has proven
to produce implant devices which are sufficient, but these machining methods are limited to certain
geometries. Every individual’s bone structure anatomy is unique. Although the spines of patients
IAMOT 2019 | 114
Additive Manufacturing in the Spinal Orthopedic Industry: An Exploratory Review
have similar characteristics, no one has an identical match. Engineers have designed orthopaedic
implant devices to closely match the anatomy of the spine but are limited to certain sizes and
shapes because of the restrictions of conventional machining methods. By not obtaining a close
or perfect match of implant, post-surgical issues, like subsistence, where pressure of the spine
causes the implant to sink or migrate, can occur. Modern manufacturing technologies can however
create opportunities for manufacturers (and ultimately their customers) to solve specific problems
and improve competitiveness (Pretorius and De Wet, 2000). The recent introduction of additive
manufacturing in the field of spinal orthopaedic surgery creates a great potential to improve the
geometry of the implants. With the use of additive manufacturing, the geometry of the implant can
be greatly manipulated (compared to conventional machining methods), thus offering each patient
an implant specific to their anatomy. This offers the potential of fewer post-operative malfunctions
or complications, leading to improved quality of life for the patient. The aim of this research is to
explore the potential, viability and possible advantages of 3D-printing in the South African field of
spinal orthopaedic surgery.
A central parameter to this model is timing and risk perception of the technology. The manufacturer,
surgeon and patient will have to be ready to use the technology. The manufacturer will have to be
comfortable in manufacturing the product and the surgeon and patient will have to feel comfortable
in using the technology. This will go hand in hand with the perception of risk. It is believed that if
any party perceives the risks to be too great the adoption of the technology will fail. Cost is a second
important parameter. The financial burden will fall on the end-user, the potential patient in this case.
If the end-user is not willing to pay for a product, there is no market. However, if 3D-printing shows
to be a price competitive form of manufacturing and offer similar or superior results, the adoption
will be of interest. The ability of the manufacturer to produce a competitively priced product will
enable the technology to either flourish or dwindle. The third major parameter is how the technology
could aid in terms of providing a better service to the patient. This subjective decision would reflect
the thoughts and feelings of the potential patient, manufacturer and surgeon. One would need to see
competitive or superior results in terms of the functionality, cost and delivery of the product to better
the current status of the potential patient.
The above parameters link to the patient specific needs. The surgeon and potential patient will
have to divulge what their expectations of the product are and the manufacturer and surgeon will
then have to assess whether the development of the technology is capable or mature enough to
fulfil those needs. It must be noted that risk perception of embracing a new technology is very
different to actual financial risk (and a possible ruined career) encountered by those in the medical
profession on a daily basis. When adopting a new technology there is always a risk, coupled with
serious consequences. South African spinal surgeons could suffer law suits against them for loss of
life or loss of quality of life. Because foreign material is being placed into a patient there is a risk
when it comes to the design and materials used. The patient’s body could reject the implant due to
imperfections of the material or design. The manufacturer, surgeon and patient have to place large
amounts of trust in one another. Without trust, there could be severe implications to the adoption and
therefore viability of 3D-printing in the field.
An exploratory study was chosen to investigate the viability and adoption of 3D-printing of spinal
orthopaedic implants in terms of patient needs, cost, facility, product and timing. The choice of
sampling was simple random sampling although certain subjects in the group were difficult to obtain
interviews with. This was particularly with respect to the spinal orthopaedic and neuro-surgeons
who understandably have extremely busy schedules. Manufacturers interviewed were owners of
companies that preferably had done some work in the medical field. Due to the sensitivity of the
research conducted, potential patients were interviewed. Those selected were individuals who may
require spinal surgery in the future, not specifically those who have spinal damage. The aim was
to put an individual into a fictional situation and ask them questions related to a possible scenario.
For the purpose of this research thirteen respondents were interviewed, including five potential
patients, five manufacturers and three surgeons. Data gathering was mainly in terms of interviews,
both face to face and telephonic. The questionnaire was broken into three sections, providing a
dedicated section for each of the role players. The interview followed both a structured and
unstructured form. This format was believed to be the best way to obtain suitable data. Certain
questions were asked from a structured questionnaire and thereafter the research subject was given
the opportunity to openly discuss their thoughts and opinions.
4. Results
As discussed in the methodology section, the questionnaire was divided into three sections: a
section for each the patient, the manufacturer and the surgeon. Trends in answers from each group
were observed and further compiled into an integrated trend. All answers were individually and
collectively related back to the conceptual framework and research questions.
has been involved in the printing of a patient-specific spinal implant device. The manufacturers
seemed to agree that the technology in the spinal field is still in the inception phase on the technology
curve. It is believed by one manufacturer that work being done is being kept confidential, which
further clarifies the “novelty” of the technology. When it comes to facility, its seems that most
of the manufacturers are not entirely prepared and would have to work in collaboration with
those more qualified and certified to handle the printing of a patient-specific implant device.
This, however, does not imply that they do not possess any knowledge, machinery, software and
material. The greatest deterrent seems to be in obtaining the correct certification. It is believed,
from the response, that it is a costly and rigorous process to become an independent company with
all the facilities to print a patient-specific, spinal, orthopaedic implant device. This being said, most
respondents in the research group were interested in sufficiently equipping themselves should the
demand be sufficient.
It is believed that the development of such a product still has quite a way to go as some of the
manufacturers did perceive a danger in some form with regard to the printing of a spinal implant.
Their concerns involved defect mitigation and risk to the company and therefore suggested that
a sufficient amount of research to mitigate risk should been done. Generally it appears that the
manufacturers are still not entirely comfortable with the idea of supplying the product with the
current status quo and that more education on the technology still needs to take place.
4.4.1. Status
From the data, not one of manufacturers or surgeons interviewed had been directly involved with
the manufacture or application of any instrument or device. One of the manufacturers believes that
work being done in the field is probably still being kept confidential. There is definitely traction of
3D-printing technologies in the general field of orthopaedics though.
uncertain as to whether they would undergo the procedure without proper research and trials. It is
believed that the patient will definitely consider the implant if there is a recommendation from their
surgeon. None on the surgeons perceived any significant risk in the technology. However, most
surgeons believe the technology is still in the inception phase and would probably need verification
of the research before undertaking a procedure with a 3D-printed patient-specific implant.
The successful use of additive manufacturing in parallel fields of orthopaedics has probably provided
some form of comfort to subjects in accepting the technology. Several manufacturers perceived risk
in the technology. One manufacturer had concerns about the mitigation of defects in the implant
itself, however, another stated further research would serve to overcome any risks. One of the
manufacturers was concerned about the legal implications such an undertaking would have. On the
whole, it seems that there is some nervousness, but there does not seem to be any significant risk.
The perception is that the nervousness is caused by the novelty of the technology as nearly all the
manufacturers believe the technology to be in the inception phase of its maturity. There are surgeons
and manufacturers undertaking the technology in other fields of orthopaedic surgery. It is believed
that with further research and trials, penetration of the technology in the field of spinal orthopaedics
is approaching.
4.4.6. Adoption
From the results it is observed that the use of 3D-printing could aid in the ability to resize the
intervertebral cage and disc replacement in order to custom-fit the disc space of the patient.
By manufacturing a custom size and shape the implant will have better surface contact and
height to match. This could potentially give better post-operative results and mitigate migration
and subsistence of the implant. Due to the anatomy of the individual, dictated by nature, a
patient-specific implant would generally be of complex geometry which would be expensive or
impossible to machine with conventional equipment. Because the unit cost of a 3D-printed implant
does not change much with respect to quantity, due to very low set up costs, small financially
feasible batches can be printed. This makes it viable to produce customized implants for all patients.
This lowered cost could perhaps relieve the patient of the large co-payment on implants that they
currently endure. The greatest limitation is that of certain emergency procedures. The surgeon would
need a turnaround time of one day or less. The custom implant would only be able to be produced
after the patient has been thoroughly examined by the surgeon and certain scans have been done.
This could limit the custom implant to the urgency of surgery.
Each patient has their very own anatomy in terms of geometry and size. Although the surgeon is
fairly satisfied with the current implant devices, there is an interest in using a 3D-printed implant.
Additive manufacturing will allow the patient to have an implant that has the correct height and
footprint (anatomical shape). This may reduce the risk of substance and migration of the implant.
This can be regarded as a surgeon requirement. For the technology to be fully adopted, it is imperative
that the requirements and needs of the surgeon are fulfilled by the technology. The manufacturer
and surgeon will, in future, have to negotiate over the cost of the implant and production output.
It seems as if manufacturers will be willing to print from a case to case basis. This in turn appears
to be a benefit of the technology. As far as cost is concerned, surgeons are of the opinion that
medical aids are becoming restrictive and the patient will, most likely, have to make some sort of
co-payment. The possibility of the manufacturer being able to print a patient specific spinal implant
at a cheaper unit cost (due to low start-up costs of manufacturing) is real. The potential patient
revealed they would rely heavily on the recommendation of the surgeon. Due to the novelty of the
technology though, the patient may ask for research results which would reveal the superiority of the
implant. Mostly the patients will be willing to use the implant and make a co-payment if evidence
shows there is a longer service life and a quicker recovery time.
A decision to proceed with the use of a 3D-printed patient-specific implant will depend on the
confidence of and perception of risk by the three role players. The patient and surgeon generally
don’t perceive any danger in the technology, provided that the materials used subscribe to the correct
standards. It is the belief of the researcher that the technology has made substantial progress in the
extended medical field and this provides a feeling of comfort and security among the surgeons.
The manufacturer will be the weariest role-player. The manufacturer tends to perceive a risk in
the mitigation of defects in the implant itself and possibly a risk to their business if they do not
have substantial legal cover. This being said, the researcher is confident that the manufacturer will
become more comfortable with the use of the technology in the field of spinal orthopaedics after
further research and investigation. It is important that the technology becomes commercialised.
The manufacturers have stated that they will only invest in the technology to 3D-print implants in
the field of spinal orthopaedic surgery if there is sufficient demand. One must keep in mind that
the manufacturers are all running businesses and will only produce such implants with the goal of
financial return.
6. References
Choy, W.J., Mobbs, R.J., Wilcox, B., Phan, S., Phan, K. & Sutterlin, C.E., (2017), Reconstruction of Thoracic Spine
Using a Personalized 3-D-Printed Vertebral Body in Adolescent with T9 Primary Bone Tumor, World
Neurosurgery, 105, pp 1032.e13-1032.e17.
Cramer, J., Quigley, E., Hutchins, T. & Shah, L. (2017), Educational Material for 3D Visualization of Spine Procedures:
Methods for Creation and Dissemination, Journal of Digital Imaging, 30(3), pp 296-300.
Podshivalov, L., Gomes, C.M., Zocca, A., Guenster, J., Bar-Yoseph, P. & Fischer, A. (2013), Design, Analysis and
Additive Manufacturing of Porous Structures for Biocompatible Micro-Scale Scaffolds, Procedia CIRP,
5(0), pp 247-252.
Pretorius M.W. and De Wet G. (2000), A model for the assessment of new technology for the manufacturing enterprise,
Technovation, Volume 20 Issue 1, pp. 3-10.
Randazzo, M., Pisapia, J., Singh, N. & Thawani, J. (2016), 3-D printing in neurosurgery: A systematic review, Surgical
Neurology International, 7(34), pp. S801-S809.
Saprykin, A.A., Sharkeev, Y.P., Ibragimov, E.A., Babakova, E.V. & Dudikhin, D.V. (2016), Forming a single layer of
a composite powder based on the Ti-Nb system via selective laser melting (SLM), IOP Conference Series:
Materials Science and Engineering.
Serra, T., Capelli, C., Toumpaniari, R., Orriss, I.R., Leong, J.J. H., Dalgarno, K. & Kalaskar, D.M. (2016), Design
and fabrication of 3D-printed anatomically shaped lumbar cage for intervertebral disc (IVD) degeneration
treatment, Biofabrication, 8(3).
Tack, P., Victor, J., Gemmel, P. & Annemans, L. (2016), 3D-printing techniques in a medical setting: A systematic
literature review, BioMedical Engineering Online, 15(1).
Van der Watt A.J. and Pretorius M.W. (2008), Diffusion of technology in the South African private healthcare market,
PICMET 2008 conference, Cape Town.
Abstract
The increase in the complexity and the inspiring environment between the automotive organizations in Egypt forced
the quality experts and management team to propose various tools related to Quality Management Systems but there
is a slight apprehension to the ergonomic concepts in these industries. This study investigates the complications
related to the ergonomics in the assembly line of an automotive company in Egypt. The assembly line is divided
into several stations including trim line, chassis line and a glass handling station. The focus of this study is the
ergonomics of the glass handling station. The front and rear glass in the glass handling station are fixed manually
by the operators to the semi-finished cars. The operators transfer the glass from a glass rack, to a sealant table to
apply the sealant, and then fixate it in its position in the car. There are several problems recognized in this station
concerning the productivity of the company, injuries related to workers in the glass handling station and defects
related to the rear and front glass quality. In this paper we will introduce a technological solution to the safety and
ergonomics of the process. One of the main evaluation methods of ergonomics assessment in automotive industries
is the heuristic evaluation method using checklists. This method is based on the theoretical data collected about
the human abilities and limitations. The ergonomics assessment method used in the automotive industry chosen
assesses both aspects; forces and postures of the process. Force evaluation target is to conduct the total force of
heavy load and handling per day during the process. Posture evaluation is based on categorizing set of postures in
levels from 1- 5 levels. The analysis required interviews with the operators and mangers to collect the data required
for performing the analysis. Several suggestions were made such as installing a glass handling manipulator and
installing a sealant applying robot to shift the station from manual handling to semi-automated handling station and
this will significantly impact both the ergonomics and quality within the station. The implementation of the glass
handling manipulator will affect the ergonomics of the process vastly as the load of the glass will be eliminated and
some postures with high risks will be reduced and/or eliminated. Moreover, the glass rejection rate was reduced by
60% due to the lack of human error. This improvement has a direct correlation with the increase of the productivity
in the assembly line station.
Keywords: Ergonomics, Quality, Automation, Automotive, RULA, REBA
1. Introduction
Ergonomic assessment of work-related musculoskeletal disorders (WMSDs) involves the evaluation
of risk of developing a range of disorders to muscles, nerves and joints. Basically, the upper limb
and low back are the main body parts associated with work-related tasks. The development of
ergonomic risk assessment tools has taken place and is now used by most of the entities to assess the
exposure to known risk factors and to develop programs to prevent/reduce WMSDs (Davis, 2014).
The international standards of muscuskeletal risk assessment procedures are divided into analysis
with a first level method, and analysis with a second level method (ISO 11228/3, 2007). The first
analysis provides an initial risk estimate and is carried out using simplified checklists; such as, Rapid
IAMOT 2019 | 123
Managing Technology for Inclusive and Sustainable Growth
Entire Body Assessment (REBA), and Rapid Upper Limb Assessment (RULA). The green colour
shows low or no risk; the yellow colour shows medium risk; and the red colour shows high risk.
The second analysis is conducted to examine the risk level of the individual factors (frequency of
actions/minute, exertion, etc.) to identify appropriate risk reducing measures. Based on the Bureau
of Labour Statistics, assemblers are considered one of the top ten occupations for MSDs. (US DOL,
2000). The physical factor that was most recognized in the assembly lines was the awkward posture
from working with the hand over the shoulder, neck bowing, back forward, continued bowing,
achieving, hunching down and bowing on the hand surface (Rashdan, 2010).
The usage of Rapid Entire Body Evaluation (REBA) is to study the risk factor of the postures and the
load applied on some body parts. From analysing 152 surveys in car manufacturing organizations, the
MSDs were conducted to be from 1.3% to 49.3% for different body parts. The most common issue
occurs in the neck with percentage of 49.3%, the hand and wrists come second with a percentage of
48%. The upper back takes 33.6% and knee with 15.8%. The ergonomics assessment of a process
does not stop at the posture analysis; however, it also includes the cycle times of the process. The
cycle time can be measured using the “predetermined time systems” (PTS).
The aim of this research is to enhance the productivity in glass handling stations in automotive
industries and decrease the ergonomic risks. This study investigates the problems found in the
assembly line in glass handling stations, where the front and rear glass are fixed in the car. This
process is usually done manually as the operators carry the glass from the glass rack available in
the station, on to the sealant table to apply the material needed, then on to the car to fixate it in its
position. The glass station operators have one of the highest absence rates that have an average of
13 days per year per operator. In addition, the rejection and the scrap rate of the glass increases as
the quality of the glass after the assembly process is highly affected. It is affected due to the manual
handling of the process and the human error. These defects are costly as they are either repaired
which means more time, effort and materials are wasted or the whole glass is scrapped and replaced
by another which also means a waste of material.
2. Methodology
2.2. RULA/REBA
RULA and REBA are two similar methods that can be used for frequent posture analysis and
ranking their risks. RULA is more suitable for analysing specified parts of the body as hand-arm
postures, while REBA can be used to analyse the whole-body postures. To conduct the assessment,
an observation of the whole process is done, and the most frequently done postures are identified.
The observer often uses a camera to capture the posture or to record the entire process to select the
main postures. Using the RULA assessment form that is attached in the appendix, the assessor starts
to conduct his analysis (Hignett; McAttemny, 1998). REBA unlike RULA assessment evaluates
the entire body during a task. However, both methods are similar in evaluation. REBA analysis
considers the same six body regions as RULA, but it adds to those regions the couplings and grips
during the posture period. As the number of the rank increases, the risk score worsens giving bad
posture alert (Hignett & McAtamney, 2000).
2.3. CATIA
Computer Aided Three-Dimensional Interactive Application (CATIA) is a multi-platform software
used for computer-aided design (CAD), computer-aided manufacturing (CAM), computer-aided
engineering (CAE), Product lifecycle management (PLM) and 3D modelling. CATIA is developed
by Dassault Systems. CATIA includes ergonomic analysis, where a manikin is drawn with the
posture of the operator is set during the process. It is analysed using the Human Activity Analysis
module. The result of each posture analysis appears within a dialog box giving the options required
to complete the analysis, such as, the duration of the process and its frequency. CATIA provides
a real-time analysis of the posture as the manikin model selected change; the analysis score will
change automatically (Dassault Systems, 2008).
2.4.1. A B G A B P A
The first three parameters (A B G) represent the basic motion get, the next three (A B P) represents
the motions of put or move the object, and the final parameter (A) apply on the motion return.
Controlled Move sequence model is used when an object is moved through a path that is constrained.
The object cannot be freely moved.
2.4.2. A B G M X I A
This sequence includes the same A B G as the General Move, in addition to other three parameters.
The first three parameters (A B G) are the basic motion of get an object, the next three (M X I)
represents moving the object by a process time and alignment, and the last parameter (A) for the
motion return.
After using the sequence model appropriate to the process analysed, each of these parameters is assigned
a numerical value as its index number that represents the time required to have the process done.
3. Results
To accurately investigate and analyse the process, it is divided into three steps:
1. Carrying the glass from the racks onto the sealant table and the inspection process
The glass is placed in its available racks that are transported from the receiving area to
the station for assembly. The operator takes the glass unit from the rack and places it on
the sealant table and starts the inspection process where he checks for any scratches or
breaks in the glass.
Posture 1 Posture 2 Posture 3
Figure 1: Step 1 (Carrying the glass from the racks onto the sealant table and the inspection process)
Table 1: REBA Analysis Table 2: RULA Analysis
Parameters Posture 1 Posture 2 Posture 3 Parameters Posture 1 Posture 2 Posture 3
Side (R, L) R L R L R L Side (R,L) R L R L R L
Neck 1 1 2 2 1 1 Upper arm 5 5 3 1 5 1
Trunk 1 1 4 4 1 1 Lower arm 3 3 2 2 3 1
Legs 1 1 2 2 2 2 Wrist 3 3 1 2 3 1
Table A 1 1 6 6 2 2 Wrist twist 1 1 1 1 1 2
Table A 7 7 3 2 7 2
Force/load 2 2 0 0 2 2
Muscle use 0 0 1 1 0 0
Score A 3 3 6 6 4 4
Force/load 3 3 0 0 3 3
Upper Arm 5 5 2 1 5 1
W/A Score 10 10 4 3 10 5
Lower Arm 2 2 2 1 2 2 Neck 1 1 3 3 1 1
Wrist 2 2 1 1 1 1 Trunk 1 1 4 4 1 1
Table B 8 8 2 1 7 2 Legs 2 2 2 2 1 1
Coupling 2 2 0 0 1 1 Table B 3 3 7 7 1 1
Score B 10 10 2 1 8 3 Muscle use 0 0 1 1 0 0
Table C 7 7 6 6 8 4 Force/load 3 3 0 0 3 3
Activity 1 1 1 1 0 0 N/T/L
6 6 8 8 4 4
REBA 8 8 7 7 8 4 Score
Risk level H M H M RULA
7 7 6 6 7 5
Score
H: high risk M: Medium risk L Low risk Risk Level H M H M
The second step of the process; is applying the, primer, black belt and the sealant. The selected
postures 1, 2, 3, and 4 illustrate the risky postures in this step than can cause musco skeletal disorders.
Table 3 includes the results of REBA analysis and Table 4 includes the results of the RULA analysis.
Legs 2 2 2 2 2 2 2 2 Wrist 2 2 2 2 3 2 3 3
Force/load 0 0 0 0 0 0 2 2 Table A 4 4 4 2 4 4 5 5
Wrist 2 2 2 1 3 3 3 3 Neck 3 3 3 3 3 3 1 1
Table B 5 5 8 1 7 7 7 7 Trunk 4 4 4 4 3 3 1 1
Coupling 0 0 0 0 0 0 2 2 Legs 1 1 2 2 1 1 2 2
Score B 5 5 8 1 7 7 9 9 Table B 5 5 6 6 6 6 3 3
Activity 1 1 0 0 0 0 0 0 Force/load 0 0 0 0 1 1 3 3
Risk Level M H M H H H
The third step: is carrying the glass and fix it to the car. It includes four dangerous postures as shown
in Figure 3 (Occupational Safety and Health Assiociation,2000). Table 5 includes the results of
REBA analysis and Table 6 includes the results of the RULA analysis for the four postures.
Figure 3: Step 3 (Carrying the glass into the car and fixing it)
Legs 2 2 1 1 4 4 1 1 Wrist 1 3 2 2 3 3 2 2
Force/load Table A 1 4 5 4 5 5 4 4
2 2 2 2 0 0 0 0
score
Muscle use 0 0 0 0 0 0 0 0
Score A 4 4 3 3 5 5 6 6
Force/load 3 3 2 2 0 0 0 0
Upper Arm 3 6 5 5 4 4 1 1
W/A Score 4 7 7 6 5 5 4 4
Lower Arm 1 2 2 2 2 2 2 2
Neck 1 1 1 1 2 2 4 4
Wrist 1 3 3 1 2 2 2 2
Trunk 2 2 2 2 3 3 2 2
Table B 3 9 8 7 6 6 2 2
Legs 2 2 1 1 2 2 1 1
Coupling
1 1 0 0 1 1 0 0
score Table B 3 3 2 2 5 5 5 5
Score B 4 10 8 7 7 7 2 2
Muscle use 0 0 0 0 0 0 0 0
Table C 4 9 7 6 7 7 6 6
Force/load 3 3 2 2 0 0 0 0
Activity
0 0 0 0 0 0 0 0 N/T/L Score 6 6 4 4 5 5 5 5
score
REBA RULA
4 9 7 6 8 8 6 6 6 7 6 6 6 6 5 5
SCORE Score
After conducting all the postures’ results and observing the highest, the medium and the lowest
postures’ risks, CATIA software was used to represent the posture in 3 dimensions and approve
the manual results done by the REBA and RULA tables. However, the postures with the highest
risk were chosen in each part of the process. For the first part of the process, posture 1 was chosen
as it has the highest risk. Posture 1 has the highest risk because the operator is carrying the glass
that weighs an average weight of 12.5 KG for the front glass and 6.5 KG for the rear glass. And the
CATIA model and results are shown in figure 4.
For the second part of the process, posture 2 was chosen to be more illustrated by CATIA as it has the
highest risk of all the postures analysed in this part of the process. Posture 2 is considered a high risk
because the operator is bending down with his upper limb and his neck while applying the sealant due
to the preciseness the operation requires. CATIA model and results are shown in figure 5.
Posture 3 was selected for CATIA illustration as it has the highest risk level of all the postures
analysed in the third part of the process. Posture 3 is considered a high risk because the operator in
this step of the process is stepping up on the car to fixate the glass in its position as shown in figure 6
After analysing all the postures involved in the process, the process was also analysed using MOST
software to take into consideration the sequence of the process and its cycle time. It is done using the
software; however, the actual cycle time was measured using a stopwatch for five cycles per day for
a week and the following chart in figure 7 shows the results.
By using MOST, the theoretical cycle of the entire process is illustrated considering each detail in
the three steps of the process in sequential order. The process steps are divided into the following
processes:
1. Carrying the front glass from the rack to the sealant table
2. Cleaning the glass using a soft cloth
3. Applying the black belt Table 7: Cycle Times
4. Applying the primer Step TMUs Seconds Minutes
Legs 1 1 1 1 1 1 1 1 Wrist 1 1 2 2 1 1 2 2
Force/load Table A 4 2 4 4 3 3 4 4
2 2 0 0 0 0 2 2
score
Muscle use 0 0 0 0 0 0 0 0
Score A 3 3 1 1 6 6 5 5
Force/load 0 0 0 0 0 0 0 0
Upper Arm 4 1 4 4 3 3 3 3 W/A Score 5 5 4 4 3 3 4 4
Lower Arm 2 1 2 2 1 1 1 1 Neck 2 2 3 3 4 4 2 2
Wrist 1 1 1 1 1 1 1 1 Trunk 1 1 2 2 3 3 1 1
Table B 4 1 5 5 3 3 3 3 Legs 1 1 1 1 1 1 1 1
Coupling 0 0 0 0 0 0 0 0 Table B 2 2 3 3 6 6 2 2
Score B 4 1 5 5 3 3 3 3 Muscle use 0 0 0 0 0 0 0 0
Table C 3 2 3 3 4 4 4 4 Force/load 0 0 0 0 0 0 0 0
Activity score 0 0 0 0 0 0 0 0 N/T/L 2 2 3 3 6 6 2 2
REBA 3 2 3 3 4 4 4 4 RULA 3 3 3 3 5 5 3 3
The other solution which is installing a glass handling manipulator is shown in Figure 9. The REBA
and RULA analysis are conducted in tables 10 and 11 shown below
Side (R, L) R L R L R L
Neck 1 1 1 1 1 1
Trunk 1 1 1 1 1 1
Legs 1 1 1 1 1 1
Table A 1 1 1 1 1 1
Force/load 0 0 0 0 0 0
Score A 1 1 1 1 1 1
Upper Arm 2 2 1 1 2 2
Lower Arm 2 2 1 1 2 2
Wrist 1 1 1 1 1 1
Table B 2 2 1 1 1 1
Coupling 0 0 0 0 0 0
Score B 2 2 1 1 1 1
Table C 1 1 1 1 1 1
Activity score 0 0 1 1 0 0
REBA 1 1 1 1 1 1
Risk level L L L
Reviewing these actions taken before the manipulator, assessing the postures and comparing them
with the actions taken and postures assesses after manipulator can be shown in figure 10
5. Conclusion
The implementation of the glass handling manipulator will not only affect the ergonomics of the
process, but it will also affect the quality of the glass affected during the handling in the station. The
main variable in the process is the human error due to the manual handling. Since this variable was
reduced from 100% to almost 80% after using the glass manipulator, hence the rejection rate was
reduced from 0.96% to 0.36%.
REFERENCES
Berlin, C., & Adams, C. (2017). Production Ergonomics: Designing Work Systems to Support Optimal Human
Performance. London: Ubiquity .
Davis, B. (2014). One Standard Fits All. Professional Engineering, 17, pp. 43-45.
Groover, M. P. (2007). Work systems and methods, measurement, and management of work. New Jersey: Peasron
Education Inc. .
Hignett, S., & McAtamney, L. (1998). Rapid Entire Body Assessment (REBA). Applied Ergonomics 31, 201- 205.
Hignett, S., & McAtamney, L. (2000). REBA: A Survey Method for the Investigation of Work-Related Upper Limb
Disorders. Applied Ergonomics.
16949:9000, I. (2009). Quality management systems: Particular requirements for the application of ISO9001:2008 for
automotive production and relevant service part organizations. ISO Website.
Occupational Safety and Health Assiociation. (2000). Ergonomics: The Study of Work. Washington: US Department
of Labor.
OSHAcademy. (2018). Introduction to Ergonomics . Oregon: Geigle Safety Group.
Rashdan, A. I. (2010). Ergonomics Assessment Of Workstation Design In Automotive Industry. ational Conference in
Mechanical Engineering Research and Postgraduate Studies; 2nd NCMER.
Systems, D. (2008). CATIA V5 training; Human Modeling. Dessault Systems.
Tobias Helgemeir
Pontificia Universidad Católica del Perú,
Escuela de Posgrado, Lima, Perú
E-mail: tobias.helgemeir@pucp.edu.pe
Abstract
Artificial Intelligence (AI) used in the software industry has experienced great success during the last years.
Especially emerging and technology affine markets in Asia and Latin America offer great opportunities for new
AI solutions that support the customer. Additionally, to the technological development, there is also a growing
demand in the tourism and hospitality industry. As a result, software companies specialized in the tourism
and hospitality industry have started to adopt artificial intelligence in many different forms in their products.
Especially in the tourism industry, customers require personalized service and are also highly emotional. As a
consequence, the industry lives or dies on excellent service. Furthermore, there is a high pressure on prices, AI and
automatization can help to offer tourism products and services for reasonable costs. However, AI software systems
have become more and more complicated and society’s expectations regarding the capabilities and intelligence
of such systems are also growing. That results in higher costs, higher difficulty levels and higher computational
requirements tourism software companies have to cope with. For these reasons, the main goal of this research is
to find sectors within the tourism industry in which AI software solutions are helpful for the travelers’ experience
and also reasonable in efforts and costs for tourism software technology providers within a defined time horizon
of 5 years. To get an impression of future developments, various foresight methods such as the Delphi method
and a structural analysis were used. This paper elaborates on the practical opportunities and challenges to be faced
by tourism software companies when developing AI software solutions and provides recommendations on how
to deal with these challenges. The analysis shows that major improvements because of AI can be implemented in
online travel agencies (OTAs) which are considered as the most important field for application of AI technology.
Within this sector, chatbots, individual offers, mobile apps and social networks as a data source will improve
travelers experience which leads consequently to an increase in revenues.
Keywords: Forecasting, Tourism, Software Solutions, Artificial Intelligence, Service Automation, Delphi Method
1. Introduction
Artificial Intelligence (AI) has been fascinating people for many years. In 1956, John McCarthy
defined AI as follows: “AI is the science and engineering of making intelligent machines, especially
intelligent computer programs. It is related to the similar task of using computers to understand human
intelligence, but AI does not have to confine itself to methods that are biologically observable” [1].
More than 60 years later, AI has now left the status of a technology in its infancy and has reached a
tipping point in its development: It is able to autonomously produce critical decisions and predictive
insights. Today, we use machine-learning techniques as a part of our everyday lives, whether we
are searching on Google, tagging people in Facebook photos, communicate online with a chatbot
or shop on Amazon. The consulting firm “Roland Berger” also recognized massive improvements
in deep learning methods which have multiplied the possible applications of AI to enhance human
performance. Automatization and personalization deliver opportunities for almost every industry to
enhance their efficiency and rentability [2].
A search in patentinspiration.com, a website which gives an overview about patents applied and
issued proves a strongly growing importance of AI in especially in China (2230 patents) and the US
(1651 patents) (Figure 1) [3]. Google trends, which measures people’s interest in particular areas,
also reports an increasing importance (Figure 2). However, in comparison to patent applications,
Google trends indicates significantly lower interest in AI in the United States (Figure 3) [4].
Source: patentinspiration.com
selectively. However, the paradox is, that customers have an expanding ocean of content which often
do not provide an authentic picture of the destination, which leads to customers who struggle to find
the content that helps them to make the right travel decision. Thus, searching for travel information
online makes planning frustrating and time-consuming. Tourism companies, as well as travelers, are
searching for a fast and cost-effective way of planning their business and vacation travel [7] these
systems have become more and more complicated. Society’s expectation regarding the capabilities
and intelligence of such systems has also grown. We have become a more complicated society
with more complicated problems. As the expectation of intelligent systems rises, we discover many
more applications for artificial intelligence. Additionally, as the difficulty level and computational
requirements of such problems rise, there is a need to distribute the problem solving. Although the
field of multiagent systems (MAS. This leads to a need for individual customization of the tourism
product [6]. Currently, eDreams ODIGEO is applying AI across its brands—eDreams, Opodo,
GO Voyages, Travellink and Liligo to predict the customers’ wishes and deliver tailored results.
According to eDreams, technology is the key to understand their customers, eDreams‘ aim is to
trigger their clients emotionally to grasp what makes a journey reasonable to each individual [8]but
the next step is to develop algorithms to factor-in emotional drivers.”,”URL”:”https://www.tnooz.
com/article/edreams-research-brings-the-ei-of-ai-to-otas/”,”language”:”en-US”,”issued”:{“date-pa
rts”:[[“2018”,9,19]]},”accessed”:{“date-parts”:[[“2018”,10,5]]}}}],”schema”:”https://github.com/
citation-style-language/schema/raw/master/csl-citation.json”} . In terms of service, AI will become
increasingly important for destinations in managing end-to-end customer relationships from trip
consideration to the on-site visit [6]. After the trip, customers often post reviews on Facebook,
Instagram etc. Content created by the user can either be helpful or harmful. Akehurst 2009 found
out that tourism organizations cannot afford to ignore the user-generated content which produces a
negative image of the destination or the tourism provider. However, the sheer amount of content in
form of blogs, reviews, social media and traditions marketing communications makes it impossible
to manually monitor the relevant content of a destination or company. Especially new forms of
content such as virtual reality, videos and the growing number of images require new monitoring
technologies [9]. All in all, AI offers great opportunities for the tourism industry, however, there
are some downsides and difficulties for the industry. AI is only useful when additional benefits are
higher than allover cost (factors cost, personnel, training etc.) and efforts. An also important factor
is the customer and the business culture itself. Trust and willingness to be served by a machine and
liberal businessmen attitudes are essential for new technology to be accepted and not sabotaged to run
successfully [10], [11]”container-title”:”2017 International Conference on Infocom Technologies
and Unmanned Systems (Trends and Future Directions).
This paper elaborates on the practical opportunities and challenges faced by the different sectors
in the tourism industry using AI software in the future until the year 2024. To do so, the following
sections of this paper describe the application of strategic foresight, the Delphi method and the
application in this research. The results section is divided into the most important sectors of the
industry (OTAs, destinations, the aviation and the hotel sector). The last part of this paper gives an
overview of four possible outcome scenarios.
needs and helps in initiating the work on possible future technologies well in advance which will
consequently help in strategic planning [12]. In this context, Rohatgi and Rohatgi, 1979 proved the
usefulness of the Delphi method to identify future technologies [13] (2).
2. Research Design
2.1. Delphi
Delphi is one of the most famous methods in future studies to deal with the ever-growing complexity
in the decision-making process. It is a useful planning aid to high-level decision-makers in public
and private sectors. In particular, the Delphi method is especially suitable for generating future
information for long-term planning in topics where changes in current trends are expected.
The Delphi technique in its simplest form eliminates committee activity among the experts
altogether and replaces it with a carefully designed program of sequential individual interrogations
(usually best conducted by questionnaires) interspersed with information and opinion feedback.
The process can reveal the convergence of opinions and identify conflicting views [15], [16].
To execute a Delphi, Stevenson, 2010 designed a 13 steps plan:
The first steps are to define the aim and the scope of the survey. The third step is a comprehensive
literature review to identify significant driving forces and variable trends. After that, experts have
to be found and selected. This step is followed by a draft survey which is tested with the help of
selected experts. After necessary adjustments, the first round of the survey can be run. In the second
round, the questions should be adapted according to the responses of the first round. Also, new
information from the answers in the round has to be included. During the second round of the survey,
experts who’re answers are falling out of the interquartile zone that was established in the first, are
requested to justify their answers. Stevenson (2010) suggests repeating the second round as often as
necessary. The last steps are carrying out the final analyses and presenting the results.
However, according to Ortega San Marin, 2013, there are also variations possible.
A common variation is a two-round Delphi followed by a task force evaluation for questions
where no convergence could be reached [17]. In our research, we first planned to execute a
two-round Delphi in form of a questionnaire which could be either done in face to face
interviews, by filling in a paper form or online. In traditional areas, the Delphi method was
created for long-term predictions (20–30 years) where experts are usually the only available
source of information [16]”language”:”en”,”author”:[{“family”:”Stevenson”,”given”:”Elizabeth
Victoria”}],”issued”:{“date-parts”:[[“2010”]]},”accessed”:{“date-parts”:[[“2018”,11,12]]}}}],”sch
ema”:”https://github.com/citation-style-language/schema/raw/master/csl-citation.json”} . However,
because of the fast development of AI and IT technologies, the time frame in our study will not
exceed more than five years.
than 5 years (occurrence within the years between 2021 and 2024), the further future after 2024 and
a never expected occurrence (Figure 4).
3.1. OTAs
OTAs will make use of chatbots in online consultancy of their customers. Individual offers which
will be supported with data from social networks and better mobile apps can help to improve
customer experience and consequently increase their revenues. However, OTAs will be dependent
on liberal privacy regulations which have a high influence on the AI development in this sector.
3.2. Destinations
Destinations will benefit from data obtained from social networks to improve the traveler’s experience
and increase their revenues. In addition, travelers wish to use mobile applications during their stay at
their destinations which offer individually designed offerings and virtual guidance during their stay.
Travelers are also willing to share GPS data which can be used to target offerings and information
about sights and points of interest according to the travelers’ current position. However, experts see
strong employee resistance when AI solutions will be executed.
3.3. Aviation
For airlines, we see great opportunities to increase their revenues in the field of individual pricing
in combination with yield optimization and individual marketing. However, the airline industry
is strongly dependent on historical data, therefore, as OTAs, airlines are dependent on liberal
governmental regulations.
4. Scenario Building
A scenario is not a future reality but a way of foreseeing the future, thereby enlightening the present
in terms of all possible and desirable futures. A scenario approach can only be credible and useful
if it meets the five prerequisites: relevance, importance, coherence, plausibility and transparency.
In other words, one must ask the right questions, formulate the right hypotheses clearly and ascertain
the coherence and probability of possible combinations. A scenario is not an end in itself; it only
becomes meaningful when its results and implications are embodied in real action. From this point
of view, it is often advisable to limit the scenarios to about four to six key hypotheses [12].
Due to the evaluation of high uncertainty and high importance, we found out that the development
of mobile apps, the access to customer data, development of natural language processing and the
opportunity for companies to gain revenue are of major importance for the development and the
acceptance of AI in the tourism industry [14]. Afterwards, a structural analysis identified access
to customer data and the opportunity to gain higher revenues as the most influencing factors.
Based on the influencing factors we developed the system structure and designed the axis of Schwartz
according to Ortega and San Martín, 2013 [18] (Figure 5).
5. Conclusion
During our investigation, we applied a Delphi and a structural analysis to identify future developments
in AI software used in the tourism industry. Among the key findings, it should be noted that the
development of an AI solution depends heavily on access to customer data, government restrictions,
the development of mobile applications and the ability to generate additional revenue for tourism
enterprises. However, as the major factor, we identified liberal legislation which sets the basis for
the application of customer data to train algorithms and delivers the raw material to target customers
individually, augments travelers’ experience and leads finally to lower costs, higher revenues
and benefits.
The second aim of the study was to define the sectors which will be most affected by AI. In this
context, we could identify OTAs as the most affected sector. Here, chatbots, individual offers,
mobile apps and social networks as a data source will improve travelers experience. Also, employee
resistance will have a minor influence. In the hotel sector and in tourism destinations, however,
employee resistance will be an important topic management have to deal with.
Finally, we developed different scenarios of the application of AI in tourism software in the future years
until 2024. In that context, it is notable that the presented scenarios are not a forecast of future reality,
rather, this study intends to illustrate possible effects in the future and thus serve as an aid for decision
making. Applying the Delphi research, nine experts with different backgrounds in AI and the tourism
industry participated. During the Delphi, we discovered that there was a strong consensus within the
participating experts even in the first round which made the initially planned second round redundant.
This fact proves that the selection of experts, as well as the questioning, was in itself consistent and
that the results can be seen as valid. However, because of the high influence of legislation, further
research studies could evaluate the influence of different legislation within different regions on the
complexity and the impact on development costs in tourism software development.
References
Rajaraman, V., (2014), JohnMcCarthy—Father of artificial intelligence, Resonance, vol. 19, no. 3, 198–207.
Berger R., (2018), Artificial Intelligence, Roland Berger, 2018. [Online]. Available: https://www.rolandberger.com/de/
Insights/Global-Topics/Artificial-Intelligence/.
PatentInspiration, (2018), Available: https://app.patentinspiration.com/#/report/29D00994A4FC/filter. [23-Nov-2018].
Google Trends, (2018), Google Trends. Available: /trends/explore. [23-Nov-2018].
UNWTO, “World Tourism Barometer,” vol. 16, no. 3, p. 5, 2018.
Ouimet P. and Clark P., (2017), DestinationNEXT PROJECT TEAM:, 57.
Turcu, C. and Turcu, C., (2017), Applying Artificial Intelligence and Internet Techniques in Rural Tourism Domain, 4.
tnooz, (2018), eDreams traveller motivation research brings the EI of AI to OTAs, https://www.tnooz.com/article/
edreams-research-brings-the-ei-of-ai-to-otas/, [05-Oct-2018].
Akehurst, G., (2009), User generated content: the use of blogs for tourism organisations and tourism consumers, Service
Business, vol. 3, no. 1, 51–61.
Bruzza, M. Cabrera, A. and Tupia, M., (2017), Survey of the state of art based on PICOC about the use of artificial
intelligence tools and expert systems to manage and generate tourist packages, in 2017 International
Conference on Infocom Technologies and Unmanned Systems (Trends and Future Directions) (ICTUS),
Dubai, 290–296.
Ivanov, S. and Webster C., (2017), Adoption of Robots, Artificial Intelligence and Service Automation by Travel,
Tourism and Hospitality Companies–A Cost-Benefit Analysis, 9.
Godet, M., (2000), The Art of Scenarios and Strategic Planning: Tools and Pitfalls, Technological Forecasting and
Social Change, vol. 65, no. 1, 3–22.
Rohatgi, K. and Rohatgi, P., (1979), Delphi as a tool for identifying future appropriate technologies in India,
Technological Forecasting and Social Change, vol. 14, no. 1, 65–76.
Ogilvy, J. and Schwartz, P., Plotting your scenarios.
Helmer-Hirschberg, O., (1967), Analysis of the Future: The Delphi Method. Santa Monica: RAND Corporation,
[25-Oct-2018].
Rikkonen, P. and Tapio, P., (2009), Future prospects of alternative agro-based bioenergy use in Finland—Constructing
scenarios with quantitative and qualitative Delphi data, Technological Forecasting and Social Change, vol.
76, no. 7, 978–990.
Stevenson, E.V., (2010), Some initial methodological considerations in the development and design of Delphi surveys,
http://www.st-andrews.ac.uk/media/initial.pdf. [12-Nov-2018].
Ortega, F., San Martín (2013), Prospectiva empresarial: manual de corporate foresight para América Latina, Primera
edición. Lima: Universidad de Lima, Fondo Editorial.
Dalkey, N.C., Brown, B. and Cochran, S., (1969), The Delphi Method, III: Use of Self-Ratings to Improve Group
Estimates. Santa Monica, CA: RAND Corporation.
Hasan Erbay
Istanbul Technical University / Turkey, Bosch TR Company, Turkey
E-mail: Hasan.Erbay@tr.bosch.com
Nihan Yıldırım
Istanbul Technical University / Turkey
E-mail: yildirimni@itu.edu.tr
Abstract
Digital transformation technologies and tools promises higher productivity and effectiveness levels as well as
for transforming their business models into digital. However these technologies bring uncertainties for return on
investment and require high expertise needs, they rise uncertainty for organizations which plans to adopt. SMEs
are required to identify and select the most feasible roadmap for digital transformation for productivity and
effectiveness improvements. Nevertheless, the recent literature covers only some reports and research cases
on industry 4.0 offering an overall assessment together with generic expressions. There are limited studies from
developing country perspectives which focus on the differences between centre and periphery countries in terms of
benefits and usage areas of Industry 4.0 technologies. In this regard, to fulfil the gap in research, our study proposes
a quantitative hybrid decision making model for technology selection that can be utilized in manufacturing and
particularly in automotive industry for Industry 4.0 technologies and tools. A multi-dimensional framework was
developed for combining Industry 4.0 technological tools and their potential benefits that can act as a decision
support model for manufacturing companies. Analytical Hierarchy Process, Quality Function Deployment and
Mixed Integer Programming methods were used to prioritize, relate and optimize the technological tools for their
benefits to manufacturing operations. In this study, Turkish automotive supplier industry is selected as a case
study of Turkish manufacturing industry. Through interviews and survey among experts from automotive and IT
industries, data was collected and adapted to the multi-criteria decision making model. Proposed model is expected
to function as a decision making tool for SMEs of manufacturing environment for technology selection and
choosing the appropriate strategy in their technology transfer activities for digital transformation.
Keywords: Industry 4.0, Digital Transformation, Quality Function Deployment, Analytical Hierarchy Process,
Mixed Integer Programming, Hybrid Decision Making Models
1. Introduction
Digital transformation also known as industry 4.0 is a concept integrating complicated machineries
and equipment by means of connectivity technologies (smart sensors and software) to prognosticate,
plan and manage the operations for a better sustained business and societal effects attributed the
trends towards digitization of the production taking process automation and business systems to a
disrupting level through smart usage of interconnecting machineries, namely; IoT (the internet of
things). Novel technologies bring uncertainty and hesitation for the organizations planning to adopt
themselves for the disruptive and unclear influences of digital transformation.
In the age of digital transformation, practical and theoretical structure of roadmaps and decision
making models that can be used by the industries of developing country context still remains
insufficient or immature. There are limited studies in literature background on the differences between
centre and periphery countries in terms of benefits and usage areas of Industry 4.0 technologies.
To fulfil the gap in research, our study proposes a quantitative hybrid decision making model for
technology selection that can be utilized in manufacturing and particularly in automotive industry
for Industry 4.0 technologies and tools. For this aim, a multi-dimensional framework was developed
for combining Industry 4.0 technological tools and their potential benefits that can act as a decision
support model for manufacturing companies. Analytical Hierarchy Process, Quality Function
Deployment and Mixed Integer Programming methods were used to prioritize, relate and optimize
the technological tools for their benefits to manufacturing operations. Through interviews and
survey among experts from automotive and IT industries, data was collected and adapted to the
multi-criteria decision making model.
2. Literature Background
Quoting from Lukac (2015), Lu (2017) discussed that 1st industrial revolution referred to
mechanical production plants based on water and steam power in late 18th century; then 2nd industrial
revolution occurred by the introduction of mass production that was based on electric energy in the
beginning of the 20th century; and the 3rd industrial revolution was defined by the automation of
manufacturing by information and telecommunication technologies with the virtue of internet and
electronics technology in the 1970. Industry 4.0 or the 4th industrial revolution is still on- going
with the adaptation of cyber physical systems (CPS) production, based on heterogeneous data
and knowledge integration (Lukac, 2015; Lu, 2017). Some basic contributions of Industry 4.0 to
improvement of manufacturing systems were discussed by various scholars in the literature. Major
studies are presented below by different impacts and benefits of Industry 4.0 technologies:
“Work-based learning” (Schuh and Gartzen, 2015): The paper suggests a correlation among
industry 4.0 and necessary competency. As the complexity degree of the product/process arises,
the manpower qualification is needed to be in accordance with the capability requirements to
achieve the targeted levels of transformation. The more products become individualized, the more
qualifications of the employees become challenging. Because industry 4.0 technologies does
not only provides real-time communication, transparency, improvements; but also bring serious
changes on the shop floor level.
“Lean through I4.0” (Sanders, 2016): Authors presents the similarity between the lean manufacturing
Industry 4.0 which makes a production environment smart by means of advanced communication,
information systems and sophisticated technologies. The next generation factories would behave
autonomous with no need of human operators. In this context, “autonomation” means automating
the manual activities. Also, WiFi information and communication systems provide to perform
monitoring the status, location and number of material tracking and traceability via RFID tags.
Manufacturing diverse product types with minimum changeover time has been a challenge in the
manufacturing. Modern manufacturing is transforming into mass customization and cannot bear
long setup times between products in a line.
“Disruptive business models through I4.0” (Aßmann, 2016): In this paper, the digital transformation
is examined with regard to creation new services: continuous quality control, efficient and effective
production, energy management through smart devices gathering data from the operation field,
software visualise the condition and harvest useful information and decision models with customer
benefits. The keywords here covers data analytics, data mining and big data.
“Decision support systems for maintenance through I4.0” (Sipsas et al., 2016): Industry 4.0
system suggests guidance support for blue-collar employees and maintenance team, in an industrial
production scenario, where maintenance needs immediate response.
“Mass individualization / customization by way of smart production” (Zawadzki et al., 2016): They
proposed an overall conception of smart design and smart production control as the key element for
productive operations of a smart factory. Fulfilling individual requirements (mass customization)
of clients is becoming a more important factor in determining the competitiveness of an enterprise.
Industry 4.0 assumes computerized, intelligent manufacturing environment, flexibility and high
efficiency of production, integration of different activities and effective communication between
a client and a producer, as well as between the producer and suppliers. Also Brettel et al. (2014)
reviewed several scientific studies about individual or tailored production, seamless engineering in
a virtual value chain and production networks. They concluded that due to high cost of labor, many
IAMOT 2019 | 144
Technology Selection for Industry 4.0 Digital Transformation: A Decision-Making Model
industries suffered seriously. They relocated of production plants to emerging markets, therefore
closing the productivity and quality gap has become a big challenge.
“Smart maintenance through machine learning” (Isaacs et al. , 2017): This paper suggests a road
map of forming factories smarter by means of machine learning. Connectivity between machines
and systems has enabled data from the operational domain, the Operational Technology (OT),
to become more accessible to the information technology (IT) domain. The continual growth of
machine intelligence and proliferation of sensors generating non-stop data has created a tremendous
body of information. The need for preventative maintenance concept is evolving into a new mind-set
of predictive maintenance by means of sophisticated data analytics fuelled by prosperity of sensor
data and disruptive ways of services. Using this approach, companies can begin to keep their assets
operating more efficiently, more reliably, with longer periods of uptime, without taking their assets
offline, avoiding costly downtime for regularly scheduled maintenance. By increasing uptime, with
the ambitious goal of no unscheduled downtime, companies can keep their assets operational until
the data analytics indicate a specific asset or part of an asset is approaching need for maintenance,
thereby avoiding potential costly unplanned system failure.
“OEE optimization through data analytics” (Garbie, 2016): An empirical method is proposed to
establish OEE optimization in manufacturing IIoT (Industrial Internet of Things) by means of data
analytics to monitor OEE (Overall Equipment Efficiency) and to optimize the processes. One of
the best in manufacturing is the lean Six Sigma key performance indicator of Overall Equipment
Effectiveness (OEE). To make use of analytics, it’s necessary to close the loop and provide a
mechanism to apply the data to process optimization. Total Productive Maintenance (TPM) is
one such tool that can take OEE data and improve the operation of machines and lines. TPM is a
methodology for acting on and resolving issues identified by OEE. Total Productive Maintenance is
used here as an example of ‘what to do with analytics once you have the data and you’ve analyzed
it.’ Without IIoT’s continuous, automated monitoring and feedback, TPM might be used to set limits
on line speed, based on the bottleneck.
“Advanced technologies and effects” (Deloitte, 2015): Advanced manufacturing technologies
were ranked and the opportunities and the challenges of digital transformation for the US case were
assessed. Figure 2.4 represents the key manufacturing technologies and the descriptions (that were
also utilized in our study’s “Industry 4.0 Technologies and Tools” pillar).
Figure 1: A Snapshot of Ten of the Most Promising Advanced Technologies Transforming the
Global Manufacturing Industry (Deloitte, 2015)
“Rise of AI” (Laney and Jain, 2017). In this study, authors searched about 100 Data and Analytics
Predictions Through 2021. Advanced analytics and data science are fast becoming mainstream
solutions and competencies in most organizations. To become and remain competitive, enterprises
must seek to adopt advanced analytics, and adapt their business models, establish specialist data
science teams and rethink their overall strategies to keep pace with the competition. Also, Campolo
and others (2017) investigates and criticizes the rapid development of Artificial intelligence (AI) from
various perspectives. AI is also transforming a wide range of occupations and roles. Across sectors,
automated management and hiring technologies are being introduced, promising to increase worker
productivity and flexibility, but also exposing workers to new forms of monitoring, manipulation
and control. This changes labor processes and power relations.
Considering all above given and other dimensions of benefits and usage areas of Industry 4.0
and related technological tools, Oesterreich and Teuteberg (2016) highlighted the PESTEL
(political, economic, social, technological, environmental and legal) connotation of their
adoptions (Table 1).
Table 1: Benefits of Industry 4.0 in the Context of PESTEL (Oesterreich and Teuteberg, 2016)
On-time, on-budget delivery: Reducing delivery time, keep projects under budget. Economic
Improving the image of the industry: The digital transformation of the whole industry can help to
Social
improve its image.
Improving sustainability: Controlling high carbon dioxide emissions, energy consumption and
Environmental
wastes suggests sustainable conversion processes.
Lu (2017) made a comprehensive review on Industry 4.0 and presented an overview of the content,
scope, and findings of Industry 4.0 by examining the existing literatures in all of the databases within
the Web of Science. Findings of this study revealed that the adaptability, the resource efficiency, and
the integration of supply and demand processes are improved in Industry 4.0, therefore factories,
production, cities, and potential intelligent equipment and objects become smart. On the other hand,
According to a market survey conducted by Bosch Software Innovations (2015), respondent ranked
the following cost objects to be improved my means of I4.0 practices are given in Table 2. The
same study also described the main functionalities to improve the KPI’s as follows ((Bosch SW
Innovations, 2015):
i. Monitoring of deviations
ii. Visualization of production data
iii. Providing relevant information
iv. Identification of the correlations
v. Automatic business processes
vi. Modeling of decision rules
Inventory 30%
7. Methodology
To propose a technology evaluation and selection model that leads to the best combination among
we explored the interactions between the pillars that include (1) benefits and (2) Industry 4.0 tools
and technologies that are applicable in manufacturing industry. In this study, Turkish automotive
supplier industry is utilized as a case study of Turkish manufacturing industry. A Mixed Integer
Programming model is used to collect and select the outputs from AHP (Analytical Hierarchical
Process) and Needs Analysis which utilized QFD (Quality Function Deployment) methods. For
collecting data about pillars, after a content analysis in previous literature, in-depth interviews and
a Delphi survey were conducted with 15 knowledgeable experts from major automotive supplier
companies and technology providers in Turkey and Europe. Research outline including the data
collection and analysis phases is given in Figure 2. (AHP and QFD Phases of this research is derived
from Erbay and Yildirim (2018))
Within a stage based approach, AHP method, QFD and Mixed Integer Programming model methods are
utilized: With AHP method, global weights of the pillar elements via AHP pairwise comparisons were
identified. QFD Matrices enabled to combine local weights of the pillar elements via QFD relevancies.
Finally, MIP model is formulated to obtain the best connections in the network of relations.
Figure 6: AHP & QFD Combined Survey Figure 5: AHP & QFD Combined Survey
Figure 7: Network Illustration of the Pillars’ Elements (Bn: Benefits, Tn: Tools)
A mixed-integer programming (MIP) problem is one where some of the decision variables are
constrained to be integer values (i.e. whole numbers such as -1, 0, 1, 2, etc.) at the optimal solution.
The mixed integer linear programming model seeks both minimum number of decisions and the
maximum amount of importance value (Quezada and Ospina, 2014). The method utilizes AHP and
QFD to identify the relationships’ importance among the strategic objectives, then it selects the best
and important relations to be considered in the strategy map via MIP
Figure 8 shows two sequential steps of the hierarchic model: n and n+1, n=0, 1, 2, 3 and Jn; Jn+1 =
a set of connections (nodes) in levels n and n+1, in sequence. Node i belongs to level n and nodes j
and k belong to level n+1.
Using the QFD, all the nodes of level n+1 are ranked and compared to each node i. Nodes j and
k are pairwise relevance by responding to this question: “What is the relevant importance of the
strategic objective j compared to the strategic objective k to reach the upper level strategic objective
i? The comparability is evaluated employing Saaty’s basic scale (Saaty, 1994) ranging from 1 to
9. The value of 1 refers to expression that the objectives being compared have evenly same weight
or preferability, and the value of 9 refers to the expression that the primary objective has highly
much more importance and preferability than the secondary option. The outputs from the pairwise
comparison are the weight values (0 to 1) of the relationship matrix.
: importance value of node j of level n+1 in relevance to node i of level n (obtained by QFD
relevance value).
So,
(1)
(2)
(3)
Decision variables:
(4)
is the difference between 1 and the accrued local importance of the relations chosen from level
n to level n+1.
Parameters: is the local importance of node j of level n+1 in relation to node I in level n.
Constraints: (5)
is the number of chosen relations in a level. The value of is expected to be as less as possible
due to the decision alternatives are needed to be as low as possible.
=1 (6)
is the difference the difference between 1 and the accrued importance of the chosen connections
of level n. the value of is expected to be as low as possible.
Feasibility conditions
(7)
The first set of feasibility condition defines that each node must be connected to at least one node of
the succeeding level.
; 0 , k, n (8)
Objective function
min Z = (9)
The objective funtion has two targets; minimization of the selected connections among the nodes
and the other one is the maximization of the accrued importance degree of the selected relationships.
These are conflicting objectives which develop an optimum solution impossible. therefore a control
variable θ is added to the objective function to maintain and satisfy both increasing total importance
degree and descreaee the number of the selected arcs.
The variable is divided by the overall possible quantity of relationss between levels .
So, both objectives are on the same base (0 to 1), they can be comparised. Obviously, when θ=0,
therefore the model would choose all of the arcs. On th contrary if θ=1, the model would choose
no arcs in the network, this is not desired, too. Thanks to the variable θ, the lowest number of
significant arcs will be chosen. The variable θ guarentees both minimization of the chosen arcs (in
case the decision variable = 1) and maximization of the overall importances of the selected arcs. To
provide this, θ is multiped with the total number of the selected arcs; (1- θ) is multiped with the total
importance weights in the objective function.
IAMOT 2019 | 152
Technology Selection for Industry 4.0 Digital Transformation: A Decision-Making Model
The MIP model is programmed and solved by GAMS (General Algebraic Modeling System) software
in a way of alphanumeric names for variables, parameters, tables and the equations which makes the
model be flexible and easy for adapting new or updated AHP and QFD weights, control variables.
9. Findings
After all the feedbacks from the respondents, the results for each connection arc (which is the
relevance weight among each pillar’s elements) are calculated as the geometric mean. Because
geometric mean gives more accurate and reliable average results when calculating different
feedbacks in AHP (Tomashevskii, 2015).
The overall scores of the benefits calculated by the QFD matrix are given in Figure 8. The need for
process efficiency is ranked with the highest score followed by quality performance improvement
and reducing inventories respectively. The overall scores of the tools and technologies calculated
by the QFD matrix are given in Figure 9. Data analytics is ranked first with the highest score then
followed by smart sensors and production management software. The overall scores of the challenges
calculated by the QFD matrix.
As the survey suggests both QFD and AHP applications in a combined form, AHP priorization
among the I4.0 pillars as shown in Table 4. AHP results are completely compatible with the QFD
scores for each element with a high level of consistency ratio.
IAMOT 2019 | 153
Managing Technology for Inclusive and Sustainable Growth
Table 4: AHP Weights of the Pillars (Benefits and I4.0 Tools)
Improving Quality Performance 19% Production Management Software (MES, APC, ERP) 12%
Improving Maintenance
11% Data Analytics (AI, ANN, Data Mining) 29%
Performance
Figure 11: Number of Relationships Selected (the Optimum Area in Green Circle Where θ =0.6 and θ =0.7)
𝞱 as the control variable to optimize the trade off between the minimization of the number of the
selected arcs and the maximization of the total amount of the weight of the selected arcs is the
major factor to define the best strategy map. In Figure 11, as the value of 𝞱 moves from 0 1 the
selected arcs in the network are reduced. The optimum value of 𝞱 is 0.6 and 0.7 where the decision
alternatives are its best.
The proposed methodology suggests a flexible and adaptable structure which can be employed for
various cases. As the inputs of MIP is derived from AHP and QFD, the MIP would select respective
connections among the network based on the outputs of AHP and QFD. The overall scores of the
benefits and related technological tools were calculated by the QFD matrix. Benefits were found
as the need for process efficiency, quality performance improvement and reducing inventories
respectively. For technological tools, data analytics is ranked first then followed by smart sensors
and production management software.
10. Conclusion
In this study, the primary aim is to discover the current state of the art and state of practice of
Industry 4.0 technologies in the manufacturing industry and to provide a strategy map concerning
to the potential benefits (WHAT) and tools & technologies (HOW) from different perspectives.
The research is conducted in Turkish automotive supplier industry as a case study of Turkish
manufacturing industry. Based on the comprehensive outcome of the research the following
conclusions can be drawn:
The main benefits and technologies of digital transformation in the manufacturing environment are
identified via expert interviews, rated in a QFD-like survey, ranked by AHP to suggest a technology
selection decision making model for those who target to implement and utilize I4.0 projects in a
manufacturing environment. The use of multiple decision making techniques is not new, but there is
no combined approach to I4.0 in the literature.
The highest expectation of benefits with regard to I4.0 are explored as process efficiency and quality
performance for Turkish automotive supplier industry as a case study of Turkish manufacturing
industry. The highest potential in terms of benefits perspective of I4.0 is in the areas of increasing
process and quality efficiency, reducing inventories. This is compatible with the purposes of the
lean manufacturing philosophy. Especially for the SME’s in Turkey automotive supplier industry
has to improve their productivity to survive under cost reduction pressures from the automobile
manufacturers. According to a market report (Tusiad and BCG, 2016), the highest potential to
be improved via digital technologies are ranked as production efficiency, resource efficiency and
product quality that resembles closely to our findings. According to the Global Manufacturing
Competitiveness Index (2015), decreasing costs and increasing efficiency as well as improving
productivity is vital for Turkish SME’s.
Based on the results from AHP-QFD and MIP in this study, the highest relevance of increasing
process efficiency is to data analytics. Manufacturers suffer from low process efficiency, therefore
investing on data analytics becomes more critical for those who target to remain competitive among
the other rivals. The most critical tools of I4.0 are defined as data analytics and sensor technologies
which is not surprising due to high amount of data in the manufacturing environment via sensors.
Improvement of quality and being able to produce with zero scraps and rework are another challenge
for the manufacturers in the automotive industry that requires uninterrupted supply chain management.
The more machines, products and humans are connected, the more data is generated which is known as
connectivity. Data will fuel the digital transformation and data science is already on the rise.
The essential requirement to overcome the challenges and to create and sustain the development
of independent and high value-adding technologies are the investment on the key manufacturing
technologies, and revolutionary paradigm changes in the national education system. Both government
and private sector should implement short and long term policies to manage the challenges and the
change to protect and sustain the competiveness of the organizations and Turkey’s position in the
manufacturing environment.
The proposed decision making model is expected to represent a solid unique mixed technology
evaluation and selection tool that can be validated and adapted to different contexts by researchers,
as well as to guide practitioners from manufacturing industries of developing countries in identifying
the potential benefits, technologies and barriers of industry 4.0 to allocate resources more effectively.
In this sense, the paper aims to contribute to scientific knowledge on the topics of diffusion and
adoption of new technologies which is a critical issue in developing and periphery countries
11. Acknowledgements
This article is derived from the Hasan Erbay’s MSc Thesis which was completed in Istanbul
Technical University Science and Technology Institute Management Engineering Programme in
2018 Spring.
References
Acatech Study (2017). Industrie 4.0 Maturity Index Managing the Digital Transformation of Companies.
Advantis Consulting Turquie (2017). Rising Digitalization, Industry 4.0, Smart Cities and the Opportunities on the Life
Sciences Market In Turkey, Market Study.
Aßmann, S., Resenhoeft, T. (2016). At Bosch Industry 4.0 is already a reality.
Bosch Software Innovations (2017). Industry 4.0 Product Catalogue, Retrieved September 20, 2017 from https://www.
boschsi.com/media/en/bosch_si/manufacturing/robert_bosch_produktk atalog_industri _4-0_de.pdf
Brettel, M., Friederichsen, N., Keller, M. and Rosenberg, M. (2014), How Virtualization, Decentralization and Network
Building Change the Manufacturing Landscape: An Industry 4.0 Perspective, International Journal of
Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 8:1.
Campolo, A., Sanfilippo, M, Whittaker, M. and Crawford, K. (2017). AI NOW 2017 Report, New York University.
Deloitte Development LLC (2015). Advanced Technologies Initiative Manufacturing & Innovation
Erbay H., Yıldırım N. (2018) Technology Selection for Digital Transformation: A Mixed Decision Making Model of
AHP and QFD. In: Durakbasa N., Gencyilmaz M. (eds) Proceedings of the International Symposium for
Production Research 2018 (28-31 August 2018). ISPR 2018. Springer, Cham, pp.480-493.
Garbie, I. (2016). Sustainability in Manufacturing Enterprises: Concepts, Analyses and Assessments for Industry 4.0,
Springer International Publishing AG Switzerland.
Gilchrist, A. (2016). Industry 4.0: The Industrial Internet of Things, Bangken, Nonthaburi Thailand.
Herron, C., Braiden, P.M. (2006). A methodology for developing sustainable quantifiable productivity improvement in
manufacturing companies, International Journal of Production Economics, 104, 143-153.
Heuser, V., Hess, D. (2016). Guest editorial Industry 4.0–prerequisites and visions, IEEE Transformation Automation
Science Engineering, 13 (2), 411–413.
Isaacs, D., Astorala, A., Diaz, J., Arejita, B., 2017. Making Factories Smarter Through Machine Learning, IIC
(Industrial Internet Consortium) Journal of Innovation, January 2017, https://www.iiconsortium.org/news/
joi-articles/2017-Jan-Making-Factories-Smarter-through-Machine-Learning.pdf
KPMG (2016). Turkey Automotive Executives Survey – 4, Business Models of the Future.
Laney, D. and Jain, A. (2017). 100 Data and Analytics Predictions Through 2021, ID: Gartner Incorporation, G00332376
Lu, Y. (2017). Industry 4.0: A survey on technologies, applications and open research issues, Journal of Industrial
Information Integration, 6, 1–10.
Luka, D. (2015). The fourth ICT-based industrial revolution” Industry 4.0: HMI and the case of CAE/CAD innovation
with EPLAN, 23rd Telecommunications Forum (TELFOR), IEEE, pp. 835–838.
McKinsey & Company (2015). Industry 4.0: How to navigate digitization of the manufacturing sector.
Mongo DB White Paper (2017). Deep Learning and the Artificial Intelligence Revolution.
Oesterreich, T. D. and Teuteberg F (2016). Understanding the implications of digitization and automation in the context
of Industry 4.0: A triangulation approach and elements of a research agenda for the construction industry,
Computers in Industry, 83, 121–139.
Onar, S., Büyüközkan, G., Öztayşi, B. and Kahraman, C. (2016). A new hesitant fuzzy QFD approach: An application
to computer workstation selection, Applied Soft Computing, 1-16.
Pakizehkara, H., Sadrabadib, M. M., Mehrjardic, R. Z. and Eshaghieh, A. E. (2016). The application of integration of
Kano’s model, AHP technique and QFD matrix in prioritizing the bank’s subtractions, Procedia - Social and
Behavioral Sciences, 230, 159 – 166.
Price Water House Coopers LLP (2016). 2016 Global Industry 4.0 Survey, Industry 4.0: Building the digital enterprise.
Quezada, L. and López, H. (2014). A method for designing a strategy map using AHP and linear programming, Int. J.
Production Economics, 158, 244–255.
Roblek ,V., Meško ,M., Krapez,A. (2016). A complex view of Industry 4.0, SAGE Open 6 (2).
Sanders, A., Elangeswaran, C. and Wulfsberg J. (2016). Industry 4.0 Implies Lean Manufacturing: Research Activities
in Industry 4.0 Function as Enablers for Lean Manufacturing, Journal of Industrial Engineering and
Management, 9(3), 811-833.
Schuh, G., Gartzen, T. (2015). Promoting work-based learning through Industry 4.0, Procedia CIRP, 32, 83-87.
Shafiq, S. I., Sanin, C., E., Szczerbicki, C. (2016). Virtual engineering factory: creating experience base for Industry 4.0,
Cybernetics Systems, 47 (1-2), 32–47.
Sipsas, K., Alexopoulos, K., Xanthakis, V. and Chryssolouris, G. (2016). Collaborative maintenance in flow-line
manufacturing environments: An Industry 4.0 approach, Procedia CIRP, 55, 236 – 241
Tomashevskii, I. L. (2015). Geometric Mean Method for Judgement Matrices: Formulas for Errors, Institute of
Mathematics, Information and Space Technologies.
TUSIAD & BCG (2016). Industry 4.0 in Turkey as an Imperative for Global Competitiveness an Emerging Market
Perspective.
Zawadzki, P., Żywicki, K. (2016). Smart Product Design and Production Control for Effective Mass Customization in
the Industry 4.0 Concept, Management and Production Engineering Review, 7:3, pp. 105112. Book
Marcelo T. Okano
CEETEPS, UPGEP, Brazil
E-mail: marcelo.okano@fatec.sp.gov.br
Patricia K. Inoue
CEETEPS, UPGEP, Brazil
E-mail: patricia.inoue@gmail.com
Giovana Oliveira Fadini
CEETEPS, UPGEP, Brazil
E-mail: gifadini@yahoo.com.br
Eliane Simões
CEETEPS, UPGEP, Brazil
E-mail: eliane@iqeduc.com.br
Samira Antunes
CEETEPS, UPGEP, Brazil
E-Mail: Samira_nascimento@Hotmail.com
Abstract
New information and communication technologies (ICT) are providing new scenarios for companies that were
previously not possible, requiring companies to reformulate or create new business models. The big challenge for
managers is to make sure their organizations are ready for this digital transformation.
These new scenarios have awakened in the researchers several types of definitions for this type of services offered
as shared economy, marketplace, digital business platform, ecosystem, etc. The common features of these services
are that the applications are unique, specific and developed for each provider, the provider mediates between a
service provider and a service provider, there is value creation and use of IT.
Some authors consider that business models are not enough to analyse these new scenarios. The purpose of this
research is to evaluate whether business models are capable of evaluating the scenarios of digital transformation.
For the research methodology, we use the attributes of business models as indicators. In the preliminary
bibliographic research, we find one frameworks Kübel and Zarnekow (2014). The first examines the proposed
dimensions of value, architecture, network and finance, and the second examines the attributes on platforms
and marketplaces. The sample was 3 service companies offered as shared economies and using platforms or
marketplaces.
The results showed that business models are able to identify: Value proposition refers to how organizations create
value for both their customers and each party involved in service delivery; Value architecture represents how an
organization’s capabilities and core competencies are configured to create and deliver value to customers. The value
network defines the interorganizational relationship in a business model and focus on the different actors and ways
of collaboration network. As a consequence, the value network of a platform comprises the roles of the platform’s
sponsor, provider, partner and client, allowing participation in open or closed mode, and the value financing
dimension relates to how revenue is generated, and costs are structured in the business model. Furthermore, the
dimension of value creation refers to the architecture of the value of the company and the mechanisms that allow
the creation of the value proposition; the value delivery dimension contains the elements that generate value for
a defined target customer group, and the value capture dimension or profit formula describes how the company
transforms the value delivered to customers into revenue and profit. The contribution is to demonstrate how
business models are able to analyse the scenarios of digital transformation through business models.
Keywords: Digital Transformation, Business Model
1. Introduction
Companies are adapting to new technologies and becoming digitalized, structured in new ways
are called digital organizations of the future. According to CHEW (2015), they are called DOOTF
(digital organizations of the future).
Digital transformation is profoundly changing how value is captured and created, the new companies
with new and innovative business models are born and existing companies must to rethink their
business models to become digital (ITÄLÄ, 2015).
Digital transformation of a business means discussing various types of business transformation by
introducing or adapting value-added services, using new technologies to generate a direct impact
on the delivery of results and the customer experience, making this one of the company’s main
guidelines. Channels and processes will also be transformed and the need to look for new models and
revenue streams based on customer requirements will become necessary and, consequently, it will
be mandatory to change the company’s internal culture to include “digital” at the heart of everything
is done (LLORENTE, 2016).
In more digitally mature companies, the ability to adapt or redesign the business is determined in
large part by a digital strategy clearly supported by leaders who foster a culture capable of changing
and inventing the new. In digital transformation one of the most evident attitudes is the taking of
risks as a cultural norm, causing the most advanced companies to seek new levels of competitive
advantage. Another equally important aspect is the preparation to adapt to the challenges and
functioning of the company thinking about the retention and attraction of new talents as employees
of all ages that seek compatible opportunities to work and develop in companies committed to digital
progress (Kane et al., 2015).
In view of this process evidenced in the academic and business literature, the contributions are: a)
verify in which factors companies should focus on the digital transformation of their business, through
bibliographic review and interviews with expert consultants in this area. b) to demonstrate how
business models are able to analyse the scenarios of digital transformation through business models.
2. Theoretical Framework
Typing means the complete network of all sectors of the economy and society, as well as the
BMWi (2015) ability to collect relevant information and analyse and translate that information into actions.
The changes bring advantages and opportunities, but they create completely new challenges.
“TD is the deliberate and continuous digital evolution of a company, business model,
Mazzone (2014)
process of idea or methodology, both strategically and tactically. “
TD describes the fundamental transformation of the entire business world through the
PwC (2013) establishment of new technologies based on the Internet with a fundamental impact on
society as a whole.
We understand TD as a consistent network of all sectors of the economy and the adjustment
Bouée and Schaible of actors to the new realities of the digital economy. Decisions in networked systems include
(2015) exchange and analysis of data, calculation and evaluation of options, as well as the initiation
of actions and the introduction of consequences.
changes with high-quality business decisions, can be supported by the adoption of business models
appropriate for this new digital business world (Al-Debi, El-Haddadeh, Avison, 2008).
The importance of the business model has also been highlighted in Zott, Amit and Massa (2011)
where the authors state that since 1995, there have been at least 1,177 articles published in peer-
reviewed academic journals, in which the notion of business model is addressed.
Foss & Saebi (2016) also analysed that in two decades, the literature related to the Business Model
has expanded massively. Analysing the Scopus data database, 7391 publications of the topic
“business model” were listed in the period from 1980 to 2015 as we see in Figure 1. The number
of volumes dedicated to the subject “Business Model” grows over the years. In spite of the growth
of the “Business Model Innovation” theme, but also in an increasing number, there are “Open
Innovation” and “Dynamic Capability”.
Figure 1: Number of Documents using the Terms “Business Model”, “Business Model Innovation”,
“Open Innovation” and “Dynamic Capability”
Figure 2: Nasdaq x Documents Published with the Term “Business Model” in the Web of Science
Figure 2 shows the number of documents with Business Model either in the title or as a topic
appearing in the journals indexed in the Web of Science. The author chose the Web of Science
database because it provides reliable coverage and an overview of journal history, articles, and
reference level.
The fact that the term “business model” has propagated along with the rise of NASDAQ stock may
show that the (innovative) business model was initially just a word of the moment. The terminology
of the business model concealed the lack of strategy and the bad revenue models of companies with
fast-growing stock prices, but with low or even non-existent profits.
For Thornton and Marche (2003), the widespread use of business model terminology seems to be
intrinsically linked to technology-based firms. Business models seemed to be the answer to explain
how innovative ventures dealing with technology or any other form of unclear but potentially
profitable concepts, foreign to the logic of traditional industries, were translated into business terms.
In fact, Internet companies could not be valued based on their past performance, since there was no
precedent. As a result, investors speculated on the compelling future promise based on innovative
business models.
Therefore, the term “business model” survived the dot-com bubble and, as we can see in Figure 4,
the number of “business model” articles in its title remained relatively stable between 2004 and 2007
in 25-42 articles per year. After this period, there is a new growth with 45, 68 and 83 articles, in
2008, 2009 and 2010, respectively. A more detailed look at the situation in 2004-2007 may indicate
that these documents were characterized by a shift of focus from the Internet business model to the
analysis of business models in “general business”. in virtually all sectors, the term of the business
model quickly spread to the analysis of companies in a wide range of industries. The business
model terminology has spread to various communities such as marketing, management, banking
and ICT and has been used within a variety of contexts such as business plan, business strategy,
value creation, globalization and organization design. In addition, the growth of the business model
literature in recent years can also be attributed to documents on business models outside the sphere
of business. The term has also been used as a buzzword to analyse basically any type of human
endeavour with a wide range of interpretations (GHAZIANI & VENTRESCA, 2005).
Still on the concept of the business model, Veit et al. (2014) define as a missing link between
business strategy, processes and information technology.
Osterwalder and Pigneur (2010) describe the business model as something that clarifies the logic
of creating, delivering and capturing value in an organization’s vision, translated through nine core
components segregated into four main areas, business, customers, infrastructure, and financial:
●● Clients segment: defines the different groups of people or organizations that a company
seeks to reach and serve;
●● Value proposition: aggregation or set of benefits that a company offers its clients;
●● Channels: the means and means by which the company communicates and reaches its
Customer Segments to deliver a Value Proposal;
●● Relationship with customers: it establishes the types of relations to be had with its
Segments of Clients;
●● Revenue sources: represents the compensation generated by the Customer Segment for
the delivery of the value;
●● Key resources: resources needed to make the Business Model work;
●● Key activities: describes the most important actions that a company must take to make
the business model work;
●● Main partnerships: network of main suppliers and partners;
●● Cost structure: related to all costs involved in the operation.
IAMOT 2019 | 162
Digital Transformation: News ICTs and usiness Model
In more complex and sometimes unique digital businesses, the business model needs to be explicit
and provide a new layer of information and knowledge essential to support digital business managers
become a necessity (Al-Debi, El-Haddadeh, Avison, 2008).
According to Brousseau and Penard (2007), with the evolution of digital business, it becomes
easier to identify the commonalities between the business models that exploded with the growth
of the Internet and those that existed before. The new models combine new and innovative ways
of organizing the relationship between demand and demand with a pricing strategy that takes into
account network externalities, information specificity and the ability to differentiate and discriminate
through digital technologies.
These new business models contradict the prediction of a massive disintermediation caused by the
strong development of digital technologies and the Internet, due to the fact that the intermediaries in
this context, combine demand and supply plans, then carry out transactions that remain costly within
the process. They also perform the combination of various digital products to take advantage of their
interoperation - as is the case when content is processed by software running a technical interface - is
certainly much easier than it was in the past, thanks to standardized interfaces. However, resource
and time expenditures are still required to ensure effective interoperability between digital products
to generate a service that adds value to customers. Another reason is related to the availability of
goods and services both “on” and “off-line”, making it still a challenge, ensuring the user’s access to
the information or the specific knowledge they need. Those who can provide the information should
receive appropriate incentives as well as potential users should have access to that information.
The platform is described as a business that enables an interaction between suppliers and external
buyers, creating value for both sides. It provides an environment that provides an infrastructure that
encourages interactions, facilitating the exchange of goods, services, or “social currencies.”
Many of the Internet success stories - E-Bay, Amazon, Google, Yahoo, Autobytel - have developed
business models based on the concept of platforms, assembling components, then grouping them
into packages that match complex and specific consumer needs.
3. Methodology
To support and better understand the subject, a bibliographical research was elaborated on the main
themes involved that are digital transformation and business models, which compose the Phase of the
theoretical framework (foundation). For this stage, national and international scientific knowledge
bases such as Web of Science, Elsevier, IEEE, among others, as well as books and other information
sites were considered.
In relation to the instruments and protocols used, that is, the form and the mechanisms used to
construct and collect the empirical data, it is used as sources of information, interviews with
specialists of companies that act strongly in projects of digital transformation in clients of various
sizes and segments. The interviews were conducted with open questions, with semi-structured script.
For Yin (2001), a case study is “an empirical investigation that investigates a contemporary
phenomenon within its real-life context, and when the boundaries between phenomenon and context
are not clearly defined.”
The case study is a research strategy that focuses on understanding the dynamics present within
individual configurations, and may still involve a single, or multiple, case (EISENHARDT, 1989). For
this case study, two digital transformation consulting companies will be considered as objects of study.
Qualitative and quantitative evidence will be used for this study. According to Eisenhardt (1989)
case studies can be used to provide a description; test a theory; or generate a new theory.
For field research, the sources of external and internal evidence (YIN, 2001) will be considered.
The sources of external evidence researched will be: documentary analysis, which will include
literature review and consulting documents. The sources of internal evidence: interviews using a
questionnaire with open questions together with consulting professionals, in addition to performing
direct observation techniques at the site
The data analysis procedure will be based on the intra and inter case analysis established by Miles and
Huberman (1994). This analysis aims to describe, understand, explain and cross-refer the conceptual
contents, processes and results of a given phenomenon in a multiple-case context and thus develop a
more detailed understanding of all the cases in the sample (Miles & Huberman , 1994).
The intra-case analysis, a description of each case in isolation, will provide an in-depth analysis
of the data collected in each case, highlighting specific characteristics of each one. According
to Eisenhardt (1989) it is fundamental to know the unique patterns of each case, before seeking
generalization through the cases, this will allow the researcher the deep understanding necessary to
carry out an analysis with cross-referencing of the cases.
The method to verify if it is possible to use the business model with the digital transformation was to perform
a theoretical analysis of the Uber company with the business model of Kuebel & Zarnekow (2014)
in its operations but sought to acquire other complementary companies that would bring a more
consultative vision to understand, not only the technological issue, but the business as a whole,
supported by these technologies, thus allowing to attend the cycle all for digital transformation.
Serves companies seeking a renewal or disruption, in some cases traditional companies that seek to
reinvent themselves.
The interview was held in October 2018, using the Skype tool with digital file recording and later
transcribed using Atlas software.
One of the main points raised by the interviewee was the question of understanding the business
vision with the centrality of the user, redesigning the process in search of innovation. It also considers
that there is a great lack of alignment with the concept of what is digital transformation and many
customers still understand that only investment in technology is enough for a digital transformation
of the business. Emphasis was placed on the importance of revisiting processes and aligning strategy
and technologies.
In the interview the question of the processes appears in evidence and it helps in the understanding
of where the company wants to arrive and how and what to do to align the strategy for effectiveness
in the digital transformation of the business.
In addition, there have been cases in which customers invest in leading-edge technologies and are
actually involved in the process of digital transformation, but the use of technology in isolation
does not transform the business. It is mandatory to align with the other areas so that the data is
transformed into information that leads to the expected result strategically.
The issue of culture change is also a priority and preparing teams is critical.
When the company’s culture changes, digital transformation takes the company to another reality and
it is mandatory to revisit the business model and update it to this new reality. This is a big challenge
for traditional companies because for a large company today, a failure can cause millions of losses,
but if the business model does not adapt to the agility demanded by the market, competing with the
start-ups that arise presenting new solutions that taking advantage of their agility can transform the
market they enter, that is, they can test their business models quickly and cheaply, changing and
adjusting according to the market response, traditional companies can be swallowed and expelled
from their current markets.
Case 1 Case 2
The value proposition is in the understanding of what the Customers still do not understand the value
client wants, concepts and objectives, but the company’s proposition, it is still very vague for them.
Value offer
own culture does not allow, difficult to understand the The very understanding that the customer
value proposition should participate in the process.
Value creation It is in the processes that will be remodeled In the view of companies is the use of
There is a lack of culture, to be inserted in a larger It’s time to train the leaders, to implant the
Culture
context. digital culture.
how UberBLACK came about, the company’s first product Uber Technologies Inc. was officially
founded in June 2010 in the city of San Francisco and today it is in more than 600 cities in 65
countries. Uber has rapidly expanded its presence around the world to bring people together and
revolutionize the way cities move.
Analyze with the Kuebel & Zarnekow business model (2014).
●● When receiving a call from a user, the application screen flashes and a tone sound. Only
after accepting the trip will the application show who the user is, and the location.
●● As soon as the user enters the car, the partner driver starts the journey through the
application.
●● Upon reaching the destination indicated, the partner driver ends the trip in the application.
The app then shows the price of the trip and the user’s evaluation screen, using a 1 to
5-star rating.
5. Conclusion
The objectives of this project were reached in the first case study we present the expert opinions
on the digital transformation. It can be concluded that the factors pointed out by the interviewees
converge to what the literature cites: there is a need to review the business models of companies
comprehensively, the introduction of new technologies must be accompanied by restructuring of
production processes, people management and changes, introduction of agile methods and ways of
communicating internally and externally.
In the second case study on Uber we can prove that the use of the business model to analyse
digital / computational platforms contributes to the service being accessible and available to a
greater number of users, as well as enabling certain controls and processes that do not would be
possible manually. Defining what each of these is becomes laborious because it involves a series
of processes and services from various areas and some are innovative and not clearly described
or conceptualized.
These services of digital business platforms, business platforms or shared economy, have a great
adhesion due to the ease of use and the quality of the services offered, identified in the texts the clear
presence of the concept of offered value, that induces the concept of value creation.
IAMOT 2019 | 168
Digital Transformation: News ICTs and usiness Model
6. Acknowledgements
This work is funded by FAPESP (Foundation for Research Support of the State of São Paulo),
through the project “New technological ecosystems in productive systems: A Review and Research
Agenda for digital business platforms”
References
Al-Debi, M. M., El-Haddadeh, R., & Avison, D. (2008). Defining the business model in the new world of digital
business. AMCIS 2008 Proceedings, 300.
AL-DEBEI, Mutaz M.; AVISON, David. (2010). Developing a unified framework of the business model concept.
European Journal of Information Systems, v. 19, n. 3, p. 359-376.
BROUSSEAU, Eric; PÉNARD, Thierry. (2007). The economics of digital business models: A framework for analyzing
the economics of platforms. Review of network Economics, v. 6, n. 2.
BURTON, Betsy et al. (2018). Digital Business Gives Rise to the New Economics of Connections. McKinsey &
Company Article. Disponível em: <http://www.gartner.com/imagesrv/research/algorithm-economy/pdf/
algorithm-economy-292457.pdf>. Acesso em: 27 de maio 2018.
CHEW, Eng K. Digital Organizations of the Future. in Transition, p. 13, 2015.
CISCO. (2018) Available in: https://discover.cisco.com/en/us/digital-business/whitepaper/transformation/introduction-
626F-200PY.html Access in dec 01 2018
DASILVA, Carlos M.; TRKMAN, Peter. (2014). Business model: What it is and what it is not. Long range planning,
v. 47, n. 6, p. 379-389.
DOWNES, L.; NUNES, P. (2013). Blockbuster becomes a casualty of big bang disruption. Harvard Business Review, v. 7.
EISENHARDT, K.T. (1989). Building theories from case study research. Stanford University.
FOSS, Nicolai J.; SAEBI, Tina. (2017). Fifteen years of research on business model innovation: How far have we come,
and where should we go? Journal of Management, v. 43, n. 1, p. 200-227.
GHAZIANI, Amin; VENTRESCA, Marc J. (2005). Keywords and cultural change: Frame analysis of business model
public talk, 1975–2000. In: Sociological Forum. Kluwer Academic Publishers-Plenum Publishers, p. 523-559
ITÄLÄ, Timo. (2015). Digital Business and Platforms. in Transition, p. 50.
KANE, Gerald C. et al. (2015). Strategy, not technology, drives digital transformation. MIT Sloan Management Review
and Deloitte University Press, v. 14, p. 1-25.
KUEBEL, Hannes; ZARNEKOW, Rüdiger. (2014). Evaluating platform business models in the telecommunications
industry via framework-based case studies of cloud and smart home service platforms.
LLORENTE, José A. A transformação Digital. Revista Uno, v. 24, 2016. Disponível em: https://www.revista-uno.com.
br/numero-24/a-transformacao-digital/. Acesso em: 20 ago. 2018.
Miles, M. B., & Huberman, A. M. (1994). Qualitative Data Analysis: An Expanded Sourcebook. Thousand Oaks, CA:
Sage Publications.
OSTERWALDER, Alexander; PIGNEUR, Yves. (2010). Business model canvas. Self published. Last.
PRESS, Gil. Top 10 Tech Predictions For 2017 From IDC. Forbes, 2016. Disponível em: <https://www.forbes.com/sites/
gilpress/2016/11/01/top-10-tech-predictions-for-2017-from-idc/#1bf2833d4aad>. Acesso em: 25 ago. 2018.
PwC (2013). Digitale Transformation – der gro€ßte Wandel seit der Industriellen Revolution. Frankfurt:
PricewaterhouseCoopers.
Schallmo, D., Williams, C. A., & Boardman, L. (2017). Digital Transformation Of Business Models—Best Practice,
Enablers, And Roadmap. International Journal of Innovation Management, 21(08), 1740014.
SCHWERTNER, K. (2017). Digital transformation of business. Trakia Journal of Sciences, v. 15, n. 1, p. 388-393.
SWANTON, Bill; LEHONG, Hung. (2017). A Digital Business Technology Platform Is Fundamental to Scaling Digital
Business. Gartner, Inc.
THORNTON, Jennifer; MARCHE, Sunny. (2003). Sorting through the dot bomb rubble: how did the high-profile
e-tailers fail? International Journal of Information Management, v. 23, n. 2, p. 121-138.
Veit, D., Clemons, E., Benlian, A., Buxmann, P., Hess, T., Kundisch, D., ... & Spann, M. (2014). Business models.
Business & Information Systems Engineering, 6(1), 45-53.
Westerman, G, C Calméjane, D Bonnet, P Ferraris and A McAfee (2011). Digital transformation: A roadmap for billion-
dollar organizations. MIT Center for Digital Business and Capgemini Consulting, 1–68.
YIN, R.K. (2001). Estudo de caso: planejamento e métodos. Porto Alegre: Bookman.
ZOTT, Christoph; AMIT, Raphael; MASSA, Lorenzo. (2011). The business model: recent developments and future
research. Journal of management, v. 37, n. 4, p. 1019-1042.
Abstract
Blockchain technology has emerged as a disruptive trend that can influence business,
government and society in the next years. By validating the exact time an action is taken
(births, deaths, property transfers) without the need for an intermediary (a person or institution
that validates the information), the technology has the potential to provide profound modifications
in the public service, setting itself up as a matrix for countless possibilities in digital governance.
For many theorists, it solves old questions of trust, allowing the reliability on the outputs of a
system without any intermediary or mediating entity. Academic research in blockchain is still
sparse though. Emerging markets have been singled out as fertile ground for the implementation
of blockchain-based solutions, as technology can provide the solution to various political and
social issues. The world community expects from these markets several experiments that have the
potential to guide the way the blockchain is used. Given that, this paper proposes an exploratory
study built from the perspective of institutional logics whose research question is: how are the
institutional logics present in the Brazilian public sector responding to the incorporation of
blockchain technology? In order to analyze how this recent technology with a high potential for
transforming logic and routines is being absorbed by the Brazilian public sector, a qualitative
approach was used to understand initial perceptions and to learn about the motivations and
mechanisms of government initiatives that employ blockchain technology. For this purpose,
a documentary analysis was performed and public servants from different institutions of the
federal executive branch were interviewed. Our research has shown that the blockchain technology
has entered the Brazilian public service scenario through an already institutionalized structure.
This structure consists of a hybrid logic of different approaches to public administration, with
strong bureaucratic aspects and a clear intention to become more managerial and democratic,
without normally abandoning aspects of the former. We also observed from data analysis that
the current projects are related to four main approaches: financial market, identification, data
exchange and transparency. Despite the disruptive character of the blockchain technology,
however, it may not be sufficient as a guarantee of its institutionalization in government.
The technology, in our view, has not yet reached a level of implementation that allows us to define
whether it will generate a new logic, imparting its disruptive character in public administration,
or incorporate itself into the dominant logic. At the moment, we believe that by giving space to
all the potential of the blockchain, we may see the creation of a hybrid logic, however, this will
require a greater popularization of the technology in the public service and regulation that allows
its development.
Keywords: Blockchain, Institutional Logics, Brazilian Government, Public Administration
1. Introduction
Blockchain emerged as a disruptive technology of our time and rapidly its transformative possibilities
of use in various sectors of society brought to the technology status proportional to the advent of the
internet itself.
The technology allows going beyond the monetary operations through which it became initially
known and may generate impacts in finance, accounting, management and legislation, for example
(Zhao, Fan & Yan, 2016). Blockchain is suggested as a viable matrix for many possibilities in
digital government, being pointed out as a solution to old issues concerning transparency, security,
fighting corruption, identifying people and registration in several areas. In a deeper degree and
because of its decentralizing character, it is possible to identify in the blockchain characteristics of a
“hyper-political” tool, capable of managing social interactions, dismissing a central authority
(Atzori, 2015).
There are high expectations about emerging markets applications of blockchain, about their
experimental projects and initiatives (Potter, 2017). In nations where the structure is extremely poor
or nonexistent, it is believed that there is a fertile ground for the application of more advanced
solutions-a strategy called leapfrogging. In places that already have efficient systems and
consolidated structures, however, technology adoption may face a lack of incentive, occurring in a
more timid way (Gupta & Knight, 2017).
At the same time as the world observes the development of the blockchain, we have in the Brazilian
public sector a typical scenario of emerging countries, with high institutional complexity in which
one must deal with old practices inherited from its patrimonial formation, with consolidated
bureaucratic logic and with pressure to move on a more managerial and transparent way, promoting
citizen participation and responding to it. How do governments with these hybrid characteristics
assimilate the transformative potential of technology? According to Olnes et al. (2017),
for blockchain applications in the governmental sphere, institutional aspects play an important role
that must be taken into account.
From the concept of institutional logic as “the socially constructed, historical pattern of material
practices, assumptions, values, beliefs and rules by which individuals produce and reproduce
their material subsistence, organize time and space and provide meaning to their social reality”
(Thornton and Ocasio, 1999, p. 804), from the studies on the dynamics of these logics and looking
for evidence in the recent initiatives of Brazilian public institutions based on blockchain, we address
the core question: how are the institutional logics present in the Brazilian public sector responding
to the incorporation of blockchain technology?
This paper is structured as follows: the next two sections establish the theoretical context from the
literature review on institutional logics and the bases and applications of blockchain technology.
The research context is then introduced, followed by an explanation of the methods of data collection
and analysis. Finally, the results are presented, describing how the institutionalization of blockchain
technology in the Brazilian public service is taking place. We then discuss the contributions to the
theory, suggest a research agenda and conclude.
2. Institutional Logics
Institutions, in the view of old institutionalism, could be defined as sets of rules and stable
roles and corresponding sets of meanings and interpretations. The development of institutional
theory from the 1970s onwards makes this approach more dynamic, adopting a focus on the
process of institutionalization, but at the same time maintaining an emphasis on rules and roles
(Czarniawska, 2008). This new approach emerged mainly from the research of Meyer and Rowan
(1977), Zucker (1977) and later DiMaggio and Powell (1983) (Thornton & Ocasio, 2008).
The concept of institutional logic arises precisely from the neo-institutional research. After using
the term for the first time in 1985, Friedland and Alford (1991) will later develop it. Arguing that
neo-institutional theory does not adequately explain the success and failure of institutionalization,
the authors propose a new approach which considers boundaries, instruments and power structures
to vary institutionally. Friedland and Alford (1991) see institutional transformations as a material
and symbolic subject.
In their seminal essay on institutional logic, Friedland and Alford (1991) emphasize that the major
institutional orders of Western society have a central logic that constitutes their organizational
principles. These institutional orders are the capital market, the bureaucratic state, the family,
democracy and religion. Their logic is based on a set of material practices and symbolic constructions.
According to the authors, individuals can manipulate or reinterpret symbols and practices. In this
context, institutional transformations will occur from the creation of new social relations and new
symbolic orders. Table 1 describes the central logics of the major institutional orders of Friedland
and Alford:
Table 1: Central Logics of Institutional Orders
Capital Market Accumulation and Commodification of Human Activity.
State Rationalization and regulation of human activity by legal and bureaucratic hierarchies.
Family Community and motivation of human activity by unconditional loyalty to its members and their
reproductive needs.
Democracy Participation and extension of popular control of human activity.
Religion/ Science Truth, whether mundane or transcendental and the symbolic construction of reality within which all
human activity takes place.
Western society will change over time, alternating with their importance and combining themselves
in different forms.
Thornton and Ocasio (2008) emphasize the importance of institutional entrepreneurs in the promotion
of changes in institutional logics. This character will consciously pursue his interests and engage in
creative and transformative activities through the manipulation of cultural symbols and practices.
Ometto and Lemos (2010) point out, however, the problem of collective action that must be overcome
by the institutional entrepreneur, since this can go against his individual interests. The authors cite as
elements of the entrepreneur’s role performativity and analytical, social and political skills.
Research on institutional logics will, therefore, vary in describing processes of change in institutions.
Thornton and Ocasio (1999) and Reay and Hinings (2005) research propose a dominant logic that
overlaps an old logic. Despite the existent tendency to propose this dynamic, in their research, Dunn
and Jones (2010) defend the coexistence of multiple logics in the organizational field in scenarios that
operate with several institutional spheres. Dunn and Jones (2010) also cite the research of D’Aunno,
Sutton and Price (1991), in which the possibility of competing logics present in the same context
is observed, which can make agreement and consensus impossible. In these cases, organizations
respond to external pressures by adopting some practices, according to their limitations, but visible
enough to guarantee a minimum level of legitimacy in the organizational field (D’Aunno, Sutton and
Price, 1991). Finally, the combination of conflicting logics results in the creation of hybrid logics, as
described by Thornton, Jones and Kury (2005) on their research. Table 2 systematizes the observed
dynamics of institutional logics in processes of change:
Table 2: Dynamics of Institutional Logics
Dominant logic that overlaps an Historical shift in the dominant institutional order in the ·Thornton and Ocasio
old logic higher education publishing industry Government-led (1999) ·Reay and
health reform initiative in Alberta, Canada Hinings (2005)
Coexistence of multiple logics in Coexistence of plural logics in the medical education Dunn and Jones (2010)
the organizational field sector
Competing logics present in the Conflicting institutional environment concerning drug D’Aunno, Sutton and
same context abuse treatment units Price (1991)
Combination of conflicting Changes in the accounting, architecture and higher- Thornton, Jones and
logics resulting in the creation of education publishing industries focusing on different Kury (2005)
hybrid logics changing mechanisms
Source: Author
Institutional logic is also used in several studies on the public sector, sphere permeated by multiple
inter-organizational relations, several actors and sets of rules. Meyer and Hammerschmid (2006),
for example, observe the transformation of the Austrian public administration from a bureaucratic
character to a managerial character from the analysis of the dynamics of institutional logics.
Vickers, Lyon, Sepulveda and McMullin (2017) analyze the path of innovation in the public sector
and its formation from multiple organizational logics.
Innovation in government is placed by Osborne and Brown (2013) as an emerging research topic,
given the recent transformation of public institutions from stable, hierarchical and bureaucratic
in changing environments that translate more plural states. According to the authors, there are
several factors that led to this change: the growth of the managerial approach in the public sector,
political changes, population aging and new expectations on the part of the citizens. We add to these
factors the entrance of a disruptive technology in the global scenario, in order to understand its
institutionalization in an emerging country with a complex institutional environment.
As will be seen below, blockchain technology has many possibilities for use in the public sector,
ranging from increasing transparency to making possible deeper transformations, such as automatic
transactions that no longer require intermediary government entities, redesigning processes and
IAMOT 2019 | 173
Managing Technology for Inclusive and Sustainable Growth
achieving decentralized logics of interaction with government (Atzori, 2015). Figure 1 is intended to
outline the scenario on which this research is based.
Source: Author
The outside part of the image represents the different institutional orders identified by Friedland and
Alford (1991). They are associated with distinct institutional logics, possessing their own meaning
systems and serve as a reference for organizational behavior. Teixeira and Roglio (2015) explain that
organizational practices and structures represent tangible manifestations of logic that, when combined
and configured in a recurrent way over time, provide feedback to the societal domain. The blockchain
technology lies precisely in the organizational boundary, being interpreted and manipulated within
the scope of institutional logics, in order to incorporate itself into the organizational practice of
Brazilian public sector. Its entry takes place via an already institutionalized structure. The objective
of this research is to explore how blockchain technology may affect the dominant logic and how
these logics are responding to the introduction of a new technology in its environment, whether the
tendency is that there will be conflicts and tensions, a merger, if multiple logics will cohabit in the
same scenario or if a new hybrid logic will be created.
Blockchain means literally “a chain of blocks”, “each containing a unique set of transactions that
each contain a cryptographic fingerprint called a ‘hash” (Berryhill, Bourgery & Hanson, 2018, p.15).
Each block will contain information about some or all of the most recent transactions not previously
entered in prior blocks. Thus, a block works as a real-time ledger. Within each block, the records of
previous transactions are permanently stored. Every time a block is completed, it gives way to the
next block. These blocks are joined in a linked chain (Fanning & Centers, 2016, p. 55).
Traditional information systems require centralized servers, usually held by an authority, for
data storage. In this type of system, a client-server relationship is established (Ray, 2017). The
blockchain contrasts with this system insofar as its main characteristics are distribution and sharing.
Distribution means that all copies of a document are created equal and are updated identically
simultaneously; sharing means that there is perfect and complete information across all system actors
(Berryhill, Bourgery & Hanson, 2018). Figure 2 compares the types of networks, ending in the
“distributed” network, a diagram used to explain blockchain-based systems.
and penalties are imposed digitally. A smart contract will be identified by an address and its code
resides in the blockchain. Its correct execution requires agreement, that is, validation by all parts
of the network. If a new transaction is accepted and sent to the address of this smart contract, all
participants in the mining network must agree to the next status of the contract through a consensus
protocol (Luu et al., 2016).
By validating the exact time an action is taken (births, deaths, property transfers) without the need
for an intermediary (a person or institution that validates the information), the technology also has
the potential to provide profound modifications in the public service, setting itself up as a matrix for
countless possibilities in digital governance. Today, everyday transactions are those in which people
interact with the government to prove their identity or that a car or property has been transferred.
They have to bring their documents in person and request a stamp from the appropriate agency
(Potter, 2016). Not only would blockchain technology make this step unnecessary, but it would
also provide greater security, interoperability and transparency. More than that, the blockchain has
been quoted to act as a supporting factor against corruption, given its high degree of transparency
and inability to manipulate the data. Olnes et al. (2017) point out that the blockchain can be used
for any transaction or exchange of information that involves the government. According to the
authors, the fundamental characteristics of this technology enable the implementation in a wide
range of processes: registration, inventory and information exchange. It works both in tangible
(physical properties) and intangible assets (votes, patents, ideas, reputation, intent, health,
information, etc.) (p.357).
There are still many questions, however, regarding the adherence of government to the use of this
technology. Analyzing its benefits and balancing existing solutions and structures is a challenge.
Deploying new blockchain-based solutions may require changes to other usage technologies and
their adoption should be aligned with governance issues. According to Olnes et al. (2017, p.360),
research on government blockchain initiatives will have to concern “the evolutionary character of
the technology with its institutional and social embedding.”
Atzori (2015) describes the transforming potential of the blockchain in the creation of a
hyper-connected society that performs transactions in a decentralized way and its implications for
politics, demanding new ways of thinking about governance and citizen participation. A new stage
of blockchain-based governance would require, according to the author, the disempowerment of
the state and the transformation of the hierarchical direction from vertical to horizontal. Discarding
the utopian aspect of this proposal, countries with dominant public administration logic and
established practices may find it difficult to use blockchain to promote a new institutional logic
whose characteristics lie in decentralization and less control. However, we suggest that countries
with institutional scenarios still in the process of training, the blockchain can gain more space,
consolidating a new logic that is able to take advantage of all the disruptive potential of technology.
In Brazil, the federal government included blockchain technology in its agenda in 2016. Initiatives
to use blockchain technology in Brazilian government are extremely recent and, in order to analyze
how this technology is being employed in the Brazilian scenario, this research seeks to capture their
motivations, perspectives and expected results for society.
government initiatives that employ blockchain technology. This approach focuses on the qualities of
entities, processes and meanings that can not be measured in terms of quantity, intensity and frequency
(Denzin & Lincoln, 2005, p.10). For this purpose, a documentary analysis was performed and public
servants from different institutions of the federal executive branch were interviewed.
The documentary analysis was based on data obtained from articles, news and websites about public
institutions and their actions related to blockchain technology. Documentary research provided
support for the formulation of in-depth interviews script and it was also through this information
that contacts were obtained for the initial interviews. The script of the interviews in this research was
formulated both from the theoretical basis and the objectives, as well as aspects previously found
in the documentary analysis. The in-depth interviews went beyond the contextualization given by
the previous phase, capturing nuances and perceptions that allowed to fill gaps and to understand in
greater detail the phenomenon researched.
Professionals from public institutions linked to government projects based on blockchain and to
research centers on this technology were interviewed. The interviews were conducted by telephone
or video conference and lasted an average of forty minutes with representatives of the Department
of Information and Communication Technology (Setic), linked to the Ministry of Planning, the
National Bank for Economic and Social Development (BNDES), the Central Bank of Brazil and the
Blockchain Research Institute-Brazil.
Detailed analysis of all the documents and interview data was conducted using ATLAS.ti software.
The first phase consisted of the development of codes by thematic area identified in the documents
and interviewees’ blockchain-based projects used to facilitate the analysis of the material.
These thematic areas formed the “parent-nodes” of the research. The nodes used for this paper are:
“financial market”, “identification”, “data exchange” and “transparency”.
In the second phase, these data were examined and codified according to the logic of public
administration, whose constitutive elements came from the framework established by Denhardt
and Denhardt (2000) on the approaches of Bureaucratic Administration, New Public Management
(NPM) and New Public Service (NPS)-summarized in Table 3 and the literature on institutional
logic previously discussed.
Table 3: Cnstituent Elements of Public Administration Approaches
Bureaucratic NPM NPS
Theoretical and Political theory Economic theory. Democratic theory
epistemological
foundations
Conception of the public Politically defined and Represents the aggregation of Result of a dialogue about
interest expressed in law. individual interests. shared values.
To whom are public
Clients and constituents Costumers Citizens
servants responsive?
Market-driven—the Multifaceted—public servants
Hierarchical—administrators
accumulation of self-interests must attend to law, community
Approach to are responsible for
will result in outcomes desired values, political norms,
accountability democratically elected
by broad groups of citizens professional standards and
political leaders.
(or customers). citizen interests.
Assumed organizational Bureaucratic organizations Decentralized public Collaborative structures with
structure marked by a top-down organizations with primary leadership shared internally
authority within agencies control remaining within the and externally.
and control or regulation of agency.
clients.
Source: Adapted from Denhardt and Denhardt (2000)
In the third phase of the research, the material was analyzed again and, from the passages found
and codified, it was sought to analyze the entry of new technology in an environment of an already
institutionalized structure.
In order to answer the research question, we first examined the main thematic areas in which
government initiatives and projects based on blockchain technology are concentrated. Second, we
examine the entry of this technology in the Brazilian public administration scenario in search of
manifestations and dynamics of the different institutional logics that compose it.
The blockchain technology entered the agenda in the Brazilian public sector in 2016. The first
contact of the analyzed institutions with the technology usually began from the personal knowledge
of public servants that brought it embedded in projects for the analysis of their superiors.
Data analysis shows that the current projects are related to four main approaches:
Source: Author
5.2. Identification
Blockchain offers multiple possibilities of use for applications that require identity confirmation
to operate. According to Berryhill, Bourgery and Hanson (2018, p.24), one relevant characteristic
of the blockchain technology to public service is its possibility to “confirm eligibility for benefits,
thus mitigating fraud risk and automating processes that may have previously involved significant
overhead from multiple authorities”.
Table 5: An Initiative in the Identification Area
Initiative Description Excerpt of documents/interview
Verification A successful pilot project in conjunction with “I believe that among the possibilities of application of
of documents Microsoft and another company specialized in the blockchain in government, the identification is the
and identities blockchain. The application was run by uPort, one that will first come into practice”. Staff, Setic.
the Ethereum platform identity system.
Source: Author
Pier-Information The platform will be used to exchange “The blockchain came as an idea of creating a
Integration data related to the authorization processes decentralized network with a database maintained in a
Platform of of a financial institution, which includes collaborative way, allowing an efficient exchange of
Regulatory the exchange of information on punitive information, if possible even automatic. (...) This project
Entities processes, actions of administrators and was prioritized by our management, we spent some time
corporate control of entities regulated by developing and today it is already being installed in the
the Central Bank. participating entities”. Staff, Central Bank
Fingerprint The first proof of concept of “The customer would mark which bank would have
the Blockchain Working Group access to your data. I can also have a biometrics record
(FEBRABAN), created a register with from my client. This will facilitate the opening of a digital
fictitious information. The result has account, will facilitate the use of biometrics for other
proven the ability of banks to operate members of our system.” NBC Bomesp
collaboratively, with the guarantee of the
immutability of shared data, preservation
of privacy and traceability of information.
Source: Author
5.4. Transparency
Respondents whose projects were focused on the perspective of transparency recognize that this is
an emerging issue especially because of societal pressure. Blockchain may act democratizing access
to data. Another feature of the technology that is in the process of achieving greater transparency is
the visibility of the entire transaction history to which all nodes have access (Olnes et. al., 2017). In
the same way, blockchain technology is seen by the interviewees as an efficient manner to promote
mechanisms to track resources.
Table 7: An Initiative in the Transparency Area
BNDESToken BNDESToken is defined as a mechanism “This initiative has been approved reflects very well
to track public funding route in projects the concerns of the institution. The project being voted
counting on BNDES financing, providing on by superintendents shows that transparency is a
society with information on how they are concern”. Staff, BNDES.
promoting the country’s development.
(Arantes et al., 2018)
Ancine-National The goal of this initiative is to develop “The use of technology will allow us to map in real
Cinema Agency an application to improve flexibility time the trajectory of the resources and will generate the
and efficiency in projects that fund the intelligence to know where the processes bottlenecks
audiovisual industry throughout its chain. are and how we can improve and speed up the
development of the audiovisual industry”. Staff, Ancine
(Ancine, 2018)
Source: Author
model focused on managerialism and which, following a trend from more developed countries, adds
some elements of a more democratic administration.
The analysis of the data shows how these three coexisting logics are manifested and combined
in the moment of the inclusion of blockchain technology in the Brazilian government agenda via
institutionalized structure. As the hybrid scenario of the public administration as a whole, the
initiatives demonstrate characteristics of the three approaches cited in this paper.
Interviewees affirmed the benefits of blockchain technology in fluidity, service improvements and
process facilitation. Besides, the decentralization, an inherent characteristic of the technology, lends a
New Public Management character to projects, in a tendency to eliminate the centralizing character of
the government. According to the interviewees, blockchain technology can also assist in governance
between institutions. Another tendency of governments to adopt a managerial focus in their blockchain
projects comes from the knowledge and experience held by industry and consequent strategies of
collaboration and partnership with the private sector (Berryhill, Bourgery & Hanson, 2018).
At the same time, the respondents underscored the blockchain’s potential to promote greater levels
of government transparency. This more open public service posture demonstrates characteristics
linked to the New Public Service approach.
The entry of blockchain-based projects usually occurred from one or more public servants from the
analyzed institutions. The development of these projects within the institutions, however, enters
through formal ways and goes through hierarchical instances, so that bureaucratic logic remains
present in the process of innovation management. The institutional entrepreneur, who manipulates
cultural relations, symbols and practices (Thornton & Ocasio, 2008), thus making it possible to
change institutional logic, has not been identified. This may be a relevant aspect in understanding the
rhythm with which technology has been institutionalized in the analyzed scenario.
The approaches with which technology is entering the Brazilian public service, perhaps by its
recency, end up giving us more evidence about its assimilation than in fact about the interaction
of institutional logics. The blockchain, in our view, has not yet reached a level of implementation
that allows us to define whether it will generate a new logic, imparting its disruptive character in
public administration, or incorporate itself into the dominant logic. The assimilation of a technology
“is not regarded as a form of hybridity, but rather as a gradual evolution of the dominant logic”
(Polzer, Meyer, Höllerer & Seiwald, 2016, p.6).
The interviewees emphasized the time it will take for the government to begin to verify changes
in the logic of public administration processes. Today the technology would allow the flow of
processes with the reduction of the bureaucratic logic. However, the dominance of bureaucratic
logic is strongly perceived by the interviewees, so it is believed that, at least in the short term,
the authorities will continue to restrict direct communication between the nodes of the blockchain
network, preserving its centralizing approach and even adding one more bureaucratic layer by
including more processes in the chain.
In summary, it has been observed through documentary analysis and interviews that the main
objectives of blockchain-based projects in the short term are aimed at bringing significant
improvements, but still within the scope of the coexistent logics in the public service. This leads us
to believe that, at least in the short term, we will not observe a dynamic of conflicts between logics.
The fact that all the analyzed projects are in the initial phase and that blockchain technology itself
is extremely recent can both be determining factors for the impossibility of seeing blockchain enter
this scenario as a dominant logic. However, the data examined reveal the absence of competition
with other logics as well, evidencing that the entry of the technology occurred via an already
institutionalized structure and was thus maintained. We believe that by giving space to all the
disruptive potential of the blockchain, we may see the creation of a hybrid logic, however, this will
require a greater popularization of the technology in the public service and regulation that allows its
development.
5.6. Regulation
Although it was not the primary focus of the interviews, the regulation of blockchain technology in
Brazil was the subject of discussion with all the interviewees. According to Ducas and Wilner (2017),
this stage presents a significant political challenge that requires a balance between oversight and
innovation. In addition, according to the authors, “potentially disruptive technologies—blockchain
included—necessitate a careful regulatory approach in order to safeguard existing financial systems
and meet security prerequisites” (p. 540).
There are varied discussions on the subject in the Brazilian legal sphere. There is concern among
experts about the regulation of the technology applied to the Brazilian context and if the country can
fully experience its innovative power or whether the technology will coexist with existing solutions.
There is a certain concern that parliamentarians lead initiatives guided by prejudice and lack of
information and that offices and niches protected by monopolies and licenses act strongly to defend
their models of protection.
According to the interviewees, this concern is greater when it comes to applications to the financial
market. It is believed that projects whose approach maintains the focus on identification and
transparency should enter into the flow of governance processes with greater fluidity. In any case,
given previous experiences related to the regulation of new processes and technologies, expectations
are high for the government to place the blockchain on its agenda more quickly.
In this regard, the Federal Revenue issued in November an ordinance that deals with the availability
of federal public administration data through the mechanism of data sharing through the blockchain
network. This is one of the first steps of the country towards regulation.
We find in the future regulation of technology an important factor that can modify the current
combination of logics in the public service. The disruptive character of the blockchain will not alone
guarantee its adoption to its full potential. The establishment of new rules and the modification of
current norms in favor of a more transparent, agile and reliable technology may be able to do so.
6. Conclusion
Our study provided a snapshot of the initial stages of the integration of blockchain technology into
the Brazilian government scenario. Innovations and improvements are demanded by society, by
policymakers and public administrators. This technology has the potential to promote insightful
changes in bureaucratic, managerial and democratic logic. This exploratory study aimed to
increase knowledge about the phenomenon, describing its characteristics and establishing the
basis for future research.
Our research has shown that the blockchain technology has entered the Brazilian public service
scenario through an already institutionalized structure. This structure consists of a hybrid logic of
different approaches to public administration, with strong bureaucratic aspects and a clear intention
to become more managerial and democratic, without normally abandoning aspects of the former.
Our research was able to identify institutions open to innovation projects, albeit in bureaucratic paths
and obeying hierarchies. Most of these projects seek improvements in the managerial sphere. The
importance given to improving the transparency of institutions shows also signs of a concern with
the dialogue with citizens. All these projects, however, are still subject to the dominant logic of the
public service and it has not been possible to observe changes in the sense of the flexibilization of a
centralizing logic of processes.
There are expectations regarding the regulation of technology in the country and, from our study, it
is possible to identify in regulation an important factor that can transform the dynamics of the current
institutional logics.
This research presents some limitations that lead us to identify promising opportunities for future
studies. Our analysis is based on evidence of cases chosen from the documentary analysis and can
be biased toward cases of greater success, not representing those projects that either are in extremely
early stages or have not been successful. This research also takes place in the Brazilian electoral year
and in the pre-regulation period and for the following years, we may observe changes in staff and
governing bodies of the institutions and new directions for all projects analyzed here. Other research
opportunities are also in the private sector and universities. There are also several opportunities for
further investigation through international comparative research.
References
Alvesson, M. & Spicer, A. (2018). Neo-Institutional Theory and Organization Studies: A Mid-Life Crisis? Organization
Studies. https://doi.org/10.1177/0170840618772610
Agência Nacional do Cinema. (2018). ANCINE e BNDES iniciam parceria para criação e uso de tecnologia blockchain
no FSA. Retrieved in July 18th, 2018, from https://www.ancine.gov.br/pt-br/sala-imprensa/noticias/ancine-
e-bndes-iniciam-parceria-para-cria-o-e-uso-de-tecnologia-blockchain-no
Arantes Jr., G.M., Almeida Jr., J.N.D., Onodera, M.T., Moreno, S.M.B.M., Almeida, V.R.S. (2018). “BNDESToken:
A Proposal to track BNDES’ Funding Route”. IEEE Confs on Internet of Things, Green Computing
and Communications, Cyber, Physical and Social Computing, Smart Data, Blockchain, Computer and
Information Technology, Congress on Cybermatics. Halifax, Canada.
Atzori, M. (2015). Blockchain technology and decentralized governance: Is the state still necessary? Retrieved from
https://papers.ssrn.com/sol3/papers.cfm?abstract_id=2709713.
Baran, P. (1964). On Distributed Communications: Introduction to Distributed Communications Networks. United
States Air Force Project Rand. Retrieved from https://www.rand.org/content/dam/rand/pubs/research_
memoranda/2006/RM3420.pdf
Berryhill, J., T. Bourgery & A. Hanson (2018). Blockchains Unchained: Blockchain Technology and its Use in the
Public Sector. In OECD Working Papers on Public Governance. No. 28, OECD Publishing, Paris. Retrieved
from http://dx.doi.org/10.1787/3c32c429-en.
Czarniawska, B. (2008). How to misuse institutions and get away with it: Some reflections on institutional theory(ies).
In R.C. Greenwood, C. Oliver, K. Sahlin & R. Suddaby (Eds.), The Sage handbook of organizational
institutionalism (pp. 769–782). London: SAGE Publications.
D’Aunno, T., Sutton, R. & Price, R. (1991). Isomorphism and External Support in Conflicting Institutional Environments:
A Study of Drug Abuse Treatment Units. The Academy of Management Journal, 34(3), 636-661. Retrieved
from http://www.jstor.org/stable/256409
Denhardt, R.B., Denhardt, J.V. (2000). The New Public Service: Serving Rather than Steering. Public Administration
Review, 60(6), p. 549-559.
Denzin, N.K.; Lincoln, Y.S. (2005). Introduction: The Discipline and Practice of Qualitative Research. In: Denzin, N.
K.; Lincoln, Y.S. The handbook of qualitative research. Tousand Oaks, SA: Sage. pp. 1-32.
Ducas, E. & Wilner, A. (2017). The security and financial implications of blockchain technologies: Regulating emerging
technologies in Canada. International Journal, 72(4), 538–562. https://doi.org/10.1177/0020702017741909
Dunn, M. & Jones, C. (2010). Institutional Logics and Institutional Pluralism: The Contestation of Care and Science
Logics in Medical Education, 1967–2005. Administrative Science Quarterly,55(1), 114-149. Retrieved from
http://www.jstor.org/stable/27856090
Fanning, K., Centers, D.P. (2016). Blockchain and Its Coming Impact on Financial Services. Journal of Corporate
Accounting & Finance. Retrieved from http://onlinelibrary.wiley.com/doi/10.1002/jcaf.22179/full.
Friedland, Roger and Alford, R. Robert. 1991. ‘Bringing society back in: Symbols, practices and institutional
contradictions,’ in The New Institutionalism in Organizational Analysis, ed. Walter W. Powell and Paul J.
DiMaggio, pp. 232–263. Chicago, IL: University of Chicago Press.
Gupta, V., Knight, R. (2017). How Blockchain Could Help Emerging Markets Leap Ahead. Harvard Business Review.
Retrieved from https://hbr.org/2017/05/how-blockchain-could-help-emerging-markets-leap-ahead
Luu, L., Chu, D.H., Olickel, H., Saxena, P. & Hobor, A. (2016). Making smart contracts smarter. Proceedings of the
2016 ACM SIGSAC conference on computer and communications security (pp. 254–269). ACM. Retrieved
from http://dl.acm.org/citation.cfm?id=2978309.
Meyer, R.E. & Hammerschmid, G. (2006). Changing Institutional Logics and Executive Identities: A Managerial
Challenge to Public Administration in Austria. American Behavioral Scientist, 49(7), 1000–1014. https://
doi.org/10.1177/0002764205285182
Nakamoto, Satoshi. (2008). Bitcoin: A peer‐to‐peer electronic cash system. White Paper.
NBC Bomesp. (2018, Jun 20). Entrevista com Gustavo Fosse, CIO do Banco do Brasil, no Blockchain Festival. Retrieved
from: https://www.youtube.com/watch?v=KpqcH08owCE
Vikas S. Shah
Ernst & Young US LLP., Financial Service
Organization Technology, United States
E-mail: vikas.shah@ey.com
Abstract
The risk is impacted by a range of physical conditions, changing dynamics of the businesses and their compliances,
volatility of the specific marketplace or industry segment, technological advancements and socio-economic
processes. Although the multitude of changes along the risk chain can occur and impact business operations, there
is a lack of knowledge concerning how and to what extent changes in influencing factors propagate through the
chain and finally affect the economic factors of an enterprise. Besides, complexities are in multiplication due to
globalization and inter-dependencies as well as intra-dependencies of business operations. The current approaches
have identified static risk mapping without considering the real-time characteristics of incremental risks in the
association of their dependencies. Accuracy remains at higher precedence due to growth or increasing dependencies
on socio-economic processes. Automation in risk chain needs a tremendous amount of efforts, time and domain
expertise. In this paper, we present a Blockchain driven framework for incremental risk chain management and
linking. The Blockchain enables to imply the dynamics of incremental risks. It characterizes real-time mapping
management and linking of dependencies between the incremental risk factors irrespective of the specific industry
segment, however, contextualising them based on the specific standard, compliance and regulation of business
operations. It also provisions granular level of visibility, transparency and accurate contingency in the blocks.
Orchestration and nesting of incremental risk chain are possible with the Blockchain driven orientation. The paper
illustrates the case study of incremental risks associated with the food chain industry in Smart City. The imperative
evolving evaluation criteria are identified to govern the incremental risks across a specific industry segment.
Keywords: Blockchain (BC), Business Operation, Dynamic Risk Model (DRM), Incremental Risk (IR), Risk Chain
1. Introduction
Recent advancements in disruptive technologies affecting an enterprise anywhere in the business
function can have a direct effect on a corporation’s ability to continue operations, either go-to-market
or provide critical services or products to consumers (Gejke et al., 2018). Real-time enterprises often
overlook the incremental risks (IRs) due to globalized characteristics of business operations. It is
intensifying in the last decade. IRs may result from unexpected variations in capacity constraints
on other dependent services, quality problems over upcoming competitive products, or even natural
disasters depending on the geolocation (Giannakis et al., 2018). A potential failure of business
operation causes ambiguity for all partnering enterprises.
The vulnerability of business operations of any enterprise increases with increasing uncertainty
and it increases even further if organisations have become dependent on other services, products,
marketplace and commerce. The greater uncertainties in business operations, an increasing level of
globalization in a supply-chain network and time to market due to competitive advantages led to
increased exposure to risk. It is evident that enterprises have flourished and failed at a scale and pace
never seen before due to the binding nature of the risk factors.
For example, the global sea level rise, as well as increasingly attractive real estate marketplace,
are impacting United States coastal housing market (Teicher et al., 2018). The real estate firms are
engaging in various strategies for flood risk management and considers resilience as a competitive
advantage resulting in uneven risk and uneven development. The firms may gain short-term
incentives. However, it provokes neoliberal urban governance threatening to undermine the potential
for more transformative regional adaptation. This trend of urban adaptation is damaging and it a
prominent case of IR at the coastal cities of the United States.
Another scenario is the U.S. equities market price process. Its primarily driven by the information
set and actions of large institutional investors instead of the individual retail investor. The analysis
presented in (Ghysels et al., 2018) illustrates the construction of the Herfindahl-Hirschman Index
(HHI) of institutional investor concentration as a measure of granularity. Constructing a low HHI
minus high HHI portfolio produces an annualized return of 5.6%. A conditional asset pricing model
involving various investor demands driven by time-varying beliefs over asset characteristics explains
the cross-section of HHI portfolios. The volatilities and critically are impacting the risk measures at
the portfolio and the firm level.
The risk management is becoming more multifaceted with the increased focus on geopolitical risks,
regulatory changes and new participants entering the markets, including Fintech and non-regulated
entities (Gejke et al., 2018). Consumers are also changing their behaviour with the evolving market
environment and launch of new products and services. In parallel, the technology scene and IT
capabilities have advanced significantly, providing opportunities to create tools that can enhance
the way risk is measured and managed. In this new and highly dynamic environment, how can
enterprise best manage and link IRs? The traditional approaches to risk management have not
considered the involvement of disruptive technologies and market segments. Many risk factors in
the presence of technology advancements are complex, uncertain, or even ambiguous. The potential
benefits and IR are interconnecting in most scenarios. It raises the need for risk governance that
essentially accelerates iteratively tuned risk-related decisions and maximises trust in an enterprise’s
risk management processes, structures and decisions.
The blockchain is a decentralized transaction mechanism and information management technology
(Tsai et al., 2018). It can eliminate the role of third-party with regards to transactions and their
implications across the business operations. Blockchain smart contracts and corresponding
blocks are capable of tracing transactions and computing the impact in the context of previous
transactions associated with products, services and entities trading these products and services
(Thomas et al., 2018). It eliminates the external influence of the third-party as well as alterations
based on the biases. These properties of Blockchain can be advantageous to compute and relate
IR across the enterprise and business operations with real transparency in the contextualised
transaction history.
This research makes three significant contributions to identify challenges associated with the
IR management and linking in the presence of disruptive technologies and the volatilities of
market segments. The iRCM2L framework introduced utilizing blockchain for IR management.
It provides an approach to establishing the DRM to interlink different IRs in the global environment.
Eventually, the framework explored in the context of real issues and contests of a smart city food
chain. It discusses the impact of effective IR management and its advantages. It essentially illustrates
the formulation of the risk chain management strategy for any real-time enterprise irrespective to
the specific industry.
This research makes three significant contributions to identify challenges associated with the IR
management and linking in the presence of disruptive technologies and the volatilities of market
segments. The iRCM2L framework introduced utilizing blockchain for IR management. It provides
an approach to establishing the DRM to interlink different IRs in the global environment. Eventually,
the framework explored in the context of real issues and contests of a smart city food chain. It
discusses the impact of effective IR management and its advantages. It essentially illustrates the
formulation of the risk chain management strategy for any real-time enterprise irrespective to the
specific industry.
It interns impact the margin for the producer and the associated risk chain defined, that is, SCFC_Daily_
PnL to compute the daily profit and loss for the producer. The grocery outlets have the discriminated
IRs as well. They share the ledger and pricing IR with the multiple producers. However, the DRM for
grocery outlets is different. It constitutes a different risk chain for grocery outlets. The DMon monitors
the producer margin DRM based on the SCFC_Daily_PnL and factors impacting the DRM through
other DRMs specified in DLk. However, RCA manages the relationship between the pricing and the
transporting business operation through the producer margin for food producers.
The recycling methodologies for food chain are advancing and corresponding environmental
regulations are evolving. In the food chain, the food loss is computed based on the nonrecyclable
food items. The risk chain associated with the food loss IR, SCFC_Daily_Waste, shares the DRMs
links of the SCFC_Daily_PnL due to capabilities of the blockchain offering distributed ledger
technologies. The computation for risk management between the multiple risk chains is through the
DPro. For example, the gain from the recyclable food is introduced during the computation of the
producer margin. Food loss management along the SCFC is critical.
The minimization of food loss is the ultimate goal for any city. However, if the waste is generated
then tracking is critical for reasons related to the circular economy and industrial symbiosis.
It may also be critical from the perspective of recyclable food, waste disposal and potential liabilities
associated with disposal. For food waste minimization purposes, smart contracts can be used to
ensure minimized wastage across the smart city ecosystem. Performance criteria for a producer
for waste reduction metrics can be included in BRME as an IR_Rule and tracked using DMon.
Accumulatively, IR_Threshold and IR_Rule dictate the specific level. The food loss minimisation
angle may be to adjust these IR_Rules as part of a continuous improvement process for SCFC.
The impact of risk chain developed for smart city food chain network is significant due to awareness
among people and communities, regulatory requirements and policies and environmental impact
across the smart city ecosystem. Based on the Environment Protection Agency (EPA)’s 2015 report,
solid waste landfills are the third largest source of human-related methane emission. It accounts
for 15.4% of emission in the United States. Many states have bans on landfill disposal of organic
materials like wasted food. Typically, food waste policies are in association with environmental
risks and regulations. The yard trimming waste in landfill is an apparent issue and over 20 states
currently have a policy in place to avoid it (Keller et al., 2016).
The primary source of food waste is by the producer and retailers due to lack of storage and
transportation, precision in the supply-demand ratio within the city and consumers not able to plan
their meal properly (Evans et al., 2018). The smart city administrator can define the IR threshold
linking the food wastes for each of the roles within the DRM. The smart city administrator provisions
and manages transaction-oriented food chain leveraging the blocks to compute the IR threshold.
The policies can be more attuned to the realistic amount of food waste within the smart city ecosystem
employing IR thresholds through RCA. The actual occurrence of the IR in real-time can determine
the action whether the food waste needs to be composed or utilized for biofuels. Composing is
the fifth tier defined in the EPA’s food recovery hierarchy indicating that the biofuel takes the
higher precedence. DMon can monitor and automate the decision hierarchy specified by EPA.
Food Cowboy (Evans et al., 2018) is an example mobile application to monitor the food wastage and
recycle options; however, it is not entirely advanced to address the EPA’s hierarchy and challenges.
6. Conclusion
Blockchain enabled risk chains and their applications are extensive. Significant additional
possibilities exist to address growing issues of IR management and their interdependencies in the
presence of globalization. It has not only the political and economic impact, but also impacted by
the advancements in sociology, innovation and disruptive technologies. The potential advantages
associated with iRCM2L framework provide strong motivation to identify numerous implications
across multiple industry segments. Based on the empirical case study of smarty city food chain,
References
Abram, Anna. (2018). FDA Update on Supply Chain Risks and Opportunities. U.S. Food and Drug Administration.
Parenteral Drug Association and Food and Drug Administration. Joint Regulatory Conference,
Washington, DC.
Adebola Adeseun, M., Anosike, A., Garza-Reyes, J.A. & Al-Talib, M. (2018, June). Supply chain risk perception:
understanding the gap between theory and practice. In Proceedings of the 16th IFAC Symposium on
Information Control Problems in Manufacturing (INCOM). International Federation of Automatic Control.
Auer, M. (2018). Historical Value-at-Risk. In Hands-On Value-at-Risk and Expected Shortfall (pp. 21-26). Springer, Cham.
Baryannis, G., Validi, S., Dani, S. & Antoniou, G. (2018). Supply chain risk management and artificial intelligence: state
of the art and future research directions. International Journal of Production Research, 1-24.
Biswas, K. & Muthukkumarasamy, V. (2016, December). Securing smart cities using blockchain technology. In High
Performance Computing and Communications; 2016 IEEE 18th International Conference (pp. 1392-1393).
Chin, M.V., Liu, Y. & Moffitt, K. (2018). Voluntary Disclosure Through the Ranking of Risk Factors in the 10-K.
http://dx.doi.org/10.2139/ssrn.3142990
Diabat, A., Govindan, K. & Panicker, V.V. (2012). Supply chain risk management and its mitigation in a food
industry. International Journal of Production Research, 50(11), 3039-3050.
Du, W.D., Pan, S.L., Leidner, D.E. & Ying, W. (2018). Affordances, experimentation and actualization of FinTech: A
blockchain implementation study. The Journal of Strategic Information Systems.
Evans, A.I. & Nagele, R.M. (2018). A Lot to Digest: Advancing Food Waste Policy in the United States. Natural
Resources Journal, 58(1), 177-214.
Freedman, Anne. (2013). Fixing the Food Chain: Global supply chains necessitate more stringent food-safety rules from
the FDA. Risk & Insurance September 15th 2013 Issue.
Gava, O., Galli, F., Bartolini, F. & Brunori, G. (2018). Linking Sustainability with Geographical Proximity in Food
Supply Chains. An Indicator Selection Framework. Agriculture, 8(9), 130.
Gejke, C. (2018). A new season in the risk landscape: Connecting the advancement in technology with changes in
customer behaviour to enhance the way risk is measured and managed. Journal of Risk Management in
Financial Institutions, 11(2), 148-155.
Ghysels, E., Liu, H. & Raymond, S. (2018). Granularity and (Downside) Risk in Equity Markets. http://dx.doi.
org/10.2139/ssrn.3156654
Giannakis, M. & Papadopoulos, T. (2016). Supply chain sustainability: A risk management approach. International
Journal of Production Economics, 171, 455-470.
Hilmola, O.P. (2018). Sustaining High Performer: Supply Chain Risk Management. In Supply Chain Cases (pp. 71-77).
Palgrave Pivot, Cham.
Hölbl, M., Kompara, M., Kamišalić, A. & Nemec Zlatolas, L. (2018). A Systematic Review of the Use of Blockchain in
Healthcare. Symmetry, 10(10), 470.
Janardhana, A. & Chaturvedi, R.K. (2018). Risk Management in Supply Chain Through Natural Capital Accounting
Framework (NCAF).
Keller, Maura. (2016, November). Food Waste Disposal Impact Landfill Space. American Recycler News.
Kouhizadeh, M. & Sarkis, J. (2018). Blockchain Practices, Potentials and Perspectives in Greening Supply Chains.
Sustainability, 10(10), 3652.
Labazova, O., Dehling, T. & Sunyaev, A. From Hype to Reality: A Taxonomy of Blockchain Applications. In 52th
Hawaii International Conference on System Sciences (Vol. 2019).
Li, S. & Zhan, X. (2018). Product market threats and stock crash risk. Management Science. https://doi.org/10.1287/
mnsc.2017.3016
Manuj, I. & Mentzer, J.T. (2008). Global supply chain risk management. Journal of business logistics, 29(1), 133-155.
Mendling, J., Weber, I., Aalst, W.V.D., Brocke, J.V., Cabanillas, C., Daniel, F., et al. (2018). Blockchains for business
process management-challenges and opportunities. ACM Transactions on Management Information Systems
(TMIS), 9(1), 4.
Park, Kristen. (2010). 15 Case Studies on Local Food Supply Chains. Food Industry Management Program,
Cornell University.
Scheibe, K. P. & Blackhurst, J. (2018). Supply chain disruption propagation: a systemic risk and normal accident theory
perspective. International Journal of Production Research, 56(1-2), 43-59.
Scott, T., Post, A.L., Quick, J. & Rafiqi, S. (2018). Evaluating Feasibility of Blockchain Application for DSCSA
Compliance. SMU Data Science Review, 1(2), 4.
Sheedy, E. & Griffin, B. (2018). Risk governance, structures, culture and behavior: A view from the inside. Corporate
Governance: An International Review, 26(1), 4-22.
Siegrist, M., Hübner, P. & Hartmann, C. (2018). Risk Prioritization in the Food Domain Using Deliberative and Survey
Methods: Differences between Experts and Laypeople. Risk Analysis, 38(3), 504-524.
Sun, J., Yan, J. & Zhang, K.Z. (2016). Blockchain-based sharing services: What blockchain technology can contribute
to smart cities. Financial Innovation, 2(1), 26.
Teicher, H.M. (2018). Practices and pitfalls of competitive resilience: Urban adaptation as real estate firms turn climate
risk to competitive advantage. Urban Climate, 25, 9-21.
Tsai, W.T., Deng, E., Ding, X. & Li, J. (2018, July). Application of Blockchain to Trade Clearing. In 2018 IEEE International
Conference on Software Quality, Reliability and Security Companion (QRS-C) (pp. 154-163). IEEE.
Thomas, M. (2018). Blockchain technology: addressing the risk of digital assets exchange (Doctoral dissertation,
Stellenbosch: Stellenbosch University).
van Asselt, E.D., Noordam, M.Y., Pikkemaat, M.G. & Dorgelo, F.O. (2018). Risk-based monitoring of chemical
substances in food: prioritization by decision trees. Food Control.
Marie-Christin Schmidt
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: marie-christin.schmidt@fau.de
Oscar Pakos
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: oscar.pakos@fau.de
Julius Andreae
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: julius.andreae@fau.de
Daniel Kiel
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: daniel.kiel@fau.de
Kai-Ingo Voigt
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: kai-ingo.voigt@fau.de
Abstract
The blockchain technology has become well known in the finance sector, for instance as the basis for the
cryptocurrency Bitcoin. To go beyond its mere use as cryptocurrency, academia and practice expect large potentials
by its application in further, particularly industrial, sectors. One reason is that, being a decentralized and transparent
electronic register managed remotely by subscribers on a distributed network, blockchain creates trust in online
transactions due to its reliability and safety. These are indispensable functionalities for business process digitization.
Despite blockchain’s expected far-reaching economic potential, and its relevance for academia and corporate
practice alike, possible industrial application fields are still relatively unknown. Hence, our research question is:
Which are the potentials of the blockchain technology in an industrial context? Our study’s main goal is to analyze
this technology’s industrial applications and elaborate on its future potentials.
To address the research question at hand, we employ a systematic literature review. By doing so we identify,
evaluate, synthesize, and summarize all relevant scientific publications, which allows us to detect the current state
of research concerning industrial applications and potentials of the blockchain technology. To ensure that the
results are reliable and comprehensible, our literature review is based on previously established, unambiguous, and
repeatable steps: During its course, we search the databases ScienceDirect, Ebsco, Google Scholar, and ABI/Inform
for scientific publications from 2008 until today. These databases are well established in management research and
constitute a source of high-quality information. Applying several criteria, such as quality, rigor, and scope, we select
59 relevant papers, which we examine, synthesize, and eventually discuss in detail.
By displaying the current state of research on blockchain’s industrial application fields, we develop six dominant
research categories: Motivations for using a blockchain, opportunities for IIoT applications, obstacles to
implementation, approaches to implementing a blockchain, impact of blockchain technology on the business model,
and examples of blockchain applications. We elaborate further on two case examples to illustrate how industrial
companies implement blockchain effectively. By doing so, we provide a broad overview on blockchain’s industrial
applications and give detailed insights into the potentials this technology comprises within this context.
Our study provides both researchers and practitioners with a comprehensive understanding of blockchain’s
implications for industrial value creation. With this, we enable managers to draw targeted conclusions on the value
of applying the technology and to take adequate decisions regarding its effective management. As our literature
review is among the first to synthesize recent research findings on the industrial potentials of blockchain, we
contribute to the academic debate. By identifying further research fields and in particular by providing future
research implications, we lay the fundament for further studies.
Keywords: Blockchain, Distributed Ledger, Industrial Technologies, Industrial Management, Systematic Literature
Review, Industrial Internet of Things
1. Introduction
The blockchain is an electronic register managed remotely by subscribers on a distributed network.
In the financial industry, the technology has already become well known publically as the basis of
the cryptocurrency Bitcoin and has proven its potential to significantly change and even disrupt a
business sector.
Accordingly, various academic publications are already available. In addition to numerous highly rated
articles (Cusumano, 2014; van Alstyne, 2014), there are some basic publications (Giese, 2017; Kerscher,
2013; Miller, 2015) dealing with various questions concerning blockchain in the financial world.
Whereas Bitcoin is gradually reaching its limits due to technical limitations, the blockchain is
increasingly regarded as the real innovation (Rosenberger, 2018; Schütte et al., 2017). Authors
consent that blockchain technology comprises vast potentials in processes that transfer values or
rights, require data or process integrity, allow the bypassing of intermediaries, or in any situation
in which a decentralized network is reasonable (Prinz et al., 2018). Moreover, this technology will
also be important in the public sector, creative industries, and legal, industrial as well as many other
sectors (Voshmgir, 2016).
In the industrial context, the search for such a reliable and secure technology is highly relevant,
because the current central management of databases and processes bears too many risks regarding
performance bottlenecks, error-security or the authenticity of data (Prinz et al., 2018). Especially,
considering the ongoing digitalization and digital interconnection, as reinforced by the Internet of
Things (IoT) and Industry 4.0 (Kagermann, 2014), applying digital solutions like the blockchain in
industrial settings, paves the way to create competitive advantages.
In recent years, several actors entered the field of research developing a large number of
possible industrial application areas. However, currently only a few real-life and functioning
examples of the young technology exist. Reasons for this are the complexity of the technology
required for implementation, as well as open legal, research, and economic questions that need
to be answered due to blockchain’s disruptive potential (Schütte et al., 2017; Walport, 2016).
Consequently, the scope of the blockchain technology is hard to estimate. Corresponding to
different authors’ opinion, the blockchain technology may become a key technology, like the
invention of the internet (Tapscott & Tapscott, 2016), or it may fail completely (Hackius &
Petersen, 2017; Mattila, 2016).
To account for the research gap linking blockchain with industrial settings, the following research
question will be addressed:
Which are the potentials of the blockchain technology in an industrial context?
The aim of this paper is to develop a better understanding of the potentials of blockchain technology
in an industrial context. Furthermore, it aims at disclosing additional areas of research and expanding
the scientific discussion on the various applications of blockchain technology. For this purpose, a
systematic literature review is chosen as method, since it is suitable for the identification, synthesis,
and discussion of the current state of research.
The paper is structured as follows: First, the necessary theoretical fundaments will be presented.
Subsequently, the procedure for the systematic literature review, divided into the individual steps,
is explained. The ensuing part summarizes the content of the identified literature, followed by a
discussion of the results, including an analysis of the development of publications. Based on this,
recommended actions for management and further research are given.
2. Theoretical Background
2.1. Blockchain
For the first time, the term blockchain has appeared in connection with the cryptocurrency Bitcoin
(Nakamoto, 2018). In the financial sector, blockchain technology was used to securely transfer
financial transactions. Since then, the technology could be applied in various business sectors in
which data is generated. The technology is intended to create confidence and security in dealing
with data (Efanov & Roschin, 2017; Li et al., 2017; Swan, 2015; Zhao et al., 2016), and is especially
valuable in the industrial context due to current problems with centralized data management like
performance bottlenecks, error-rates or missing data authenticity (Prinz et al., 2018).
Per definition, the blockchain is a distributed database structure managed by the members of a
network. Often, Distributed Ledger Technology (DLT), comprising a more general definition, is
used as a synonym for blockchain technology. While DLT only stands for the fact that data records
are stored decentralized and are available for several subscribers, the blockchain technology is
characterized by a specific technical design (Isaja & Soldatos, 2018). Likewise, blockchain technology
is often mistakenly used as synonym for the cryptocurrency Bitcoin (Mattila, 2016). Walport (2016)
defines blockchain as a technical concept that groups individual records into blocks and ensures
the integrity of the data through sequential concatenation and cryptographic techniques. Condos et
al. (2016) describe blockchain as a data structure without an associated management system. Swan
(2015), in contrast, defines the blockchain as the public ledger of the cryptocurrency bitcoin in
which all transactions are stored. In general terms, there is an understanding in all definitions that the
blockchain is a distributed system and its most important features are the common consensus finding
mechanism and the application of encryption methods (Schlatt et al., 2016).
The blockchain is characterized by certain properties that ensure its data securing features (Christidis
& Devetsikiotis, 2016). First, a blockchain is decentralized, as the network is managed by the
members rather than a central authority. This means that all members remotely possess a local copy
of the data. The use of consensus mechanisms ensures that only contents verified by the participants,
so-called “miners”, are stored in the blockchain. The subsequent concatenation of the blocks via the
respective hash values ensures that data cannot be changed, manipulated, or deleted. The use of a
public key enables unambiguous identification of all subscribers and their transactions, even if they
are anonymous. Thus, all data in a blockchain is stored securely and comprehensibly (Gatteschi et
al., 2018; Hackius & Petersen, 2017; Lin & Liao, 2017; Zheng et al., 2017).
The blockchain technology also bears high relevance for Smart Contracts, legal agreements transferred
solely and autonomously through the IoT. Through blockchain technology’s security features, Smart
Contracts can achieve their full potential when applied in a blockchain. The immutability of the data
results in trustworthy transactions, which eliminates the need for intermediaries when executing
transactions (Meitinger, 2017).
in living spaces (Smart Home), or directly in production (Smart Production) (Bandyopadhyay &
Sen, 2011). The use of IoT in an industrial context is referred to as Industry 4.0 (Wortmann &
Flüchter, 2015).
3. Methodology
In order to answer the research question concerning blockchain’s influence on industrial settings, a
systematic literature review based on Tranfield et al. (2003) was chosen. By means of this method,
the theoretical foundations for subsequent research can be laid, the current state of research can be
recorded, and new research questions can be answered based on existing publications and knowledge
(Okoli & Schabram, 2010). It is not expedient to purely summarize existing literature. Rather, it
should also be discussed and critically reflected (Hart, 1998). Webster and Watson (2002) emphasize
that a good analysis reveals current evidence and explores areas where further research is needed.
It is important that the entire relevant literature for the topic is reproduced (Webster & Watson,
2002). Fink (2005) defines systematic literature analysis as a systematic, unambiguous, complete
and repeatable method for identifying, evaluating, and merging all completed and published papers
by researchers, scientists, and professionals.
Predefined, clear, and repeatable methods make the results of a literature review transparent and
comprehensible (Hart, 1998). The methodological approach of this work is based on the literature
reviews of Arnold (2017), Kiel (2017), Soni and Kodali (2011), and Winter and Knemeyer (2013).
Based on their example, we subdivided the analysis into six steps, i.e., time frame of publications,
selection of databases, publication types, relevant articles, categorization of articles, and evaluation
of the categories. These steps are explained in more detail in the following three sections
A search string has been defined in order to retrieve the relevant literature from the databases. To do
so, we have elaborated, optimized, and selected several keywords derived from existing literature
and refined the results by discussing them within the research team.
The selected search terms are combined by using the logic operators “AND” and “OR”, which
is shown in Figure 1. The search string connects the terms Blockchain, Distributed Ledger, and
Hyperledger, a blockchain project of the Linux Foundation (Hyperledger, 2018) with relevant
industrial terms. Also, we repeated the investigation in German. In total, 111 publications meeting
our criteria have been identified.
Figure 2 gives an overview of the article selection process undertaken in order to ensure a systematic,
transparent, and replicable literature review. First, duplicates and not sufficiently scientific articles
have been removed (1). Second, the abstracts, introductions, and conclusions have been examined (2).
Third, the full texts have been cross-read (3). Fourth, the papers have been read in their entirety (4).
In each step, articles unrelated to management, industry, and blockchain technology have been
excluded. In order to also collect literature not contained in the databases employed, all references and
sources have been scanned for relevant publications (snowball method/cross-referencing). Finally, 59
articles have been identified serving as the final literature sample for the systematic review.
Finally, the articles are compared, evaluated, and discussed to investigate the current state of
research. Based on this, our aim is to answer the research question, derive academic and practical
recommendations for action, and reveal further research areas. Table 1 provides an overview of the
categorization of all relevant publications in the six research categories.
Table 1: Overview of the Reviewed Literature Sample
Categories
Kshetri (2017) X X
Kshetri (2018) X
Li et al. (2017) X
Li et al. (2018a) X X X
Li et al. (2018b) X X
Li et al. (2018c) X X
Lin and Liao (2017) X
Lin et al. (2018) X X X
Madhwal and Panfilov (2017) X X X
Marfia and Degli Esposti (2017) X
Mattila (2016) X
Mattila and Seppälä (2015) X
Mattila et al. (2016) X
Maull et al. (2017) X
Mondragon et al. (2018) X
Nowiński and Kozma (2017) X
Ostern (2017) X
Pinheiro et al. (2018) X X
Posadas (2018) X
Preuveneers et al. (2017) X X
Reyna et al. (2018) X X X X
Sikorski et al. (2017) X
Sklaroff (2017) X
Teslya and Ryabchikov (2017) X
Voshmgir (2017) X
Walport (2016) X
Weber et al. (2016) X
Witt and Richter (2018) X
Continuation Categories
Overall results 19 20 19 15 7 9
Yli-Huumo et al. (2016) X
4. Results
& Panfilov, 2017). For example, independant Decentralized Autonomous Organizations (DAO) use
Smart Contracts to install rules in a blockchain (Gatteschi et al., 2018; Voshmgir, 2017).
amount of transactions per second. Due to security standards, current blockchains are maximized to
seven transactions per second while other similar networks such as VISA manage 2000 transactions
per second (Albano et al., 2018). Since large amounts of data and regular updates are to be expected
in industrial processes, the use of a blockchain in the current state of the art should be evaluated in
terms of latency and ease of use (Fernández-Caramés & Fraga-Lamas, 2018; Kumar & Mallick;
Reyna et al., 2018). Solutions would be to optimize space utilization by overwriting existing
transaction data or storing only relevant data in a node (Fernández-Caramés & Fraga-Lamas, 2018;
Zheng et al., 2017).
with NFC (Near Field Communication) technology to detect counterfeit products. It is suitable for
large amounts of data through a newly developed consensus mechanism. Finally, Debabrata and
Albert (2018) developed a framework for the implementation of an organization’s supply chain
based on a blockchain.
5. Discussion
Figure 3: Course of Publications Over The Recent Years, Source: Own Illustration
Figure 3 shows the history of the publications. Although the search period for the literature review
begins in 2008, the earliest title relevant to this work was published in 2015. However, although
a unique triggering event cannot be identified during that period of time, a significant increase in
publications is observable. Supposedly, the interest in using blockchain technology for industrial
purposes has been aroused by the increasing success of cryptocurrencies and their public attention
in the last years.
Lastly, it is shown that the technology is versatility applicable. However, many technical challenges
in the implementation of a blockchain exist. As long as these challenges cannot be met, the
technology is of limited use.
6. Conclusion
6.2. Limitations
Although, the chosen methodology is suitable for the objectives of this study, there are limitations
that need to be addressed.
IAMOT 2019 | 209
Managing Technology for Inclusive and Sustainable Growth
First, it is noteworthy that the search string was defined in advance and not developed inductively.
By adapting the search terms based on newly gained insights during the research process, it would
have been possible to identify further literature. Nevertheless, we faced this effect by applying
cross-referencing.
Besides, the literature review revealed that the topic has a strong interdisciplinary background,
whereas our study primarily focusses on the business environment and economic-related databases.
Although cross-referencing approaches might mediate this issue, supplementary aspects and
viewpoints from other disciplines likely relevant for a holistic approach to blockchain in different
industrial settings, are not covered in the scope of this paper.
References
Abadi, F. A., Ellul, J. & Azzopardi, G. (2018). The Blockchain of Things, Beyond Bitcoin: A Systematic Review. In
Proc. International Conference on Blockchain, IEEE, Halifax, Canada. 30.07-03.08.2018.
Abeyratne, S. & Monfared, R. (2016). Blockchain Ready Manufacturing Supply Chain Using Distributed Ledger.
International Journal of Research in Engineering and Technology, 9(5), 1-10.
Albano, M., Sharma, P., Campos, J. & Jantunen, E. (2018). Blockchain Technology Helps Maintenance to Stop
Climate Change. In Proc. Maintenance, Performance, Measurement and Management Conference, CISTER,
Coimbra, Portugal. 21.-23.06.2018.
Alzahran, N. & Bulusu, N. (2018). Block-Supply Chain: A New Anti-Counterfeiting Supply Chain Using NFC and
Blockchain. In Proc. 1st Workshop on Cryptocurrencies and Blockchains for Distributed Systems, ACM,
Munich. 15.06.2018.
Andrews, C., Broby, D., Paul, G. & Whitfield, I. (2017). Utilising financial blockchain technologies in advanced
manufacturing. Glasgow, Scotland: University of Strathclyde.
Angrish, A., Craver, B., Hasan, M. & Starly, B. (2018). A Case Study for Blockchain in Manufacturing: “FabRec”:
A Prototype for Peer-to-Peer Network of Manufacturing Nodes. In Proc. 46th SME North American
Manufacturing Research Conference, SME, Texas, USA. 18.-22.06.2018.
Arnold, C. (2017). The Industrial Internet of Things from a Management Perspective: A Systematic Review of Current
Literature. In Proc. Emerging Trends in Marketing and Management Conference, Bucharest University of
Economic Studies, Bucharest, Romania. 28.-30.09.2017.
Atzori, M. (2016). Blockchain-based Architectures for the Internet of Things: A Survey.
Bacina, M. (2018). When Two Worlds Collide: Smart Contracts and the Australian Legal System. Journal of Internet
Law, 21(8).
Bahga, A. & Madisetti, V. K. (2016). Blockchain Platform for Industrial Internet of Things. Journal of Software
Engineering and Applications, 10(9), 533-546.
Bandyopadhyay, D. & Sen, J. (2011). Internet of Things: Applications and Challenges in Technology and Standardization.
Wireless Personal Communications, 58(1), 49-69.
Bauer, W. & Horváth, P. (2014). Industrie 4.0 - Volkswirtschaftliches Potential für Deutschland. Berlin: Bundesverband
Informationswirtschaft, Telekommunikation und neue Medien e.V.; Fraunhofer-Institut für Arbeitswirtschaft
und Organisation.
Bauernhansl, T. (2014). Die Vierte Industrielle Revolution - Der Weg in ein wertschaffendes Produktionsparadigma.
In T. Bauernhansel, M. ten Hompel & B. Vogel-Heuser (Ed.), Industrie 4.0 in Produktion, Industrie 4.0 in
Produktion, Automatisierung und Logistik. Anwendung, Technologien, Migration (pp. 5-34), Wiesbaden:
Springer.
Bocek, T., Rodrigues, B., Strasser, T. & Stiller, B. (2017). Blockchains Everywhere - A Use-case of Blockchains in the
Pharma Supply-Chain. In Proc. IFIP/IEEE Symposium on Integrated Network and Service Management,
IEEE, Lisbon, Portugal. 08.-12.05.2017.
Catalini, C. & Gans, J. S. (2018). Some Simple Economics of the Blockchain (NBER Working Paper Nr. 22952).
Christidis, K. & Devetsikiotis, M. (2016). Blockchains and Smart Contracts for the Internet of Things. IEEE Access,
4, 2292-2303.
Condos, J., Sorell, W. & Donegan, S. (2016). Blockchain Technology: Opportunities and Risks. Vermont, USA: Office
of the Secretary of State, Department of Financial Regulation Office of the Attorney General.
Cusumano, M. (2014). The Bitcoin ecosystem. Communications of the ACM, 57(10), 22-24.
Davidson, S., De Filippi, P. & Potts, J. (2016). Economics of Blockchain. In Proc. Public Choice Conference, Public
Choice Society, Fort Lauderdale, USA. 10.-12.03.2016.
Debabrata, G. & Albert, T. (2018). A Framework for Implementing Blockchain to Improve Supply Chain Performance
(SCALE Working Paper Series). Shah Alam, Malaysia: MIT Global Scale Network.
Efanov, D. & Roschin, P. (2017). The All-Pervasiveness of the Blockchain Technology. In Proc. 8th Annual International
Conference on Biologically Inspired Cognitive Architectures, BICA Society, Moskau, Russland. 01.-
06.08.2017.
Fernández-Caramés, T. M. & Fraga-Lamas, P. (2018). A Review on the Use of Blockchain for the Internet of Things.
IEEE Access, 6, 32979-33001.
Ferrag, M. A., Derdour, M., Mukherjee, M., Derhab, A., Maglaras, L. & Janicke, H. (2018). Blockchain Technologies
for the Internet of Things: Research Issues and Challenges.
Fink, A. (2005). Conducting Research Literature Reviews. From the Internet to Paper (2.ed.). Thousand Oaks, USA:
SAGE Publications.
Gatteschi, V., Lamberti, F., Demartini, C., Pranteda, C. & Santamaría, V. (2018). Blockchain and Smart Contracts for
Insurance: Is the Technology Mature Enough? Future Internet, 10(2).
German Federal Ministry of Education and Research. (2017). Industrie 4.0, Bundesministerium für Bildung und
Forschung. Retrieved 18.09.2018 from https://www.bmbf.de/de/zukunftsprojekt-industrie-4-0-848.html
Giese, P. (2017). Die Bitcoin-Bibel: das Buch zur digitalen Währung. Kleve: BTC-ECHO.
Hackius, N. & Petersen, M. (2017). Blockchain in Logistics and Supply Chain: Trick or Treat? In Proc. Hamburg
International Conference of Logistics, Technische Universität Hamburg-Harburg, Hamburg. 12.-14.10.2017.
Hart, C. (1998). Doing a Literature Review. Releasing the Social Science Research Imagination. Thousand Oaks, USA:
SAGE Publications.
Hermann, M., Pentek, T. & Otto, B. (2015). Design Principles for Industrie 4.0 Scenarios: A Literature Review.
Dortmund: Technische Universität Dortmund, Fakultät Maschinenbau, Audi Stiftungslehrstuhl Supply Net
Order Management.
Holland, M., Nigischer, C. & Stjepandić, J. (2017). Copyright Protection in Additive Manufacturing with Blockchain
Approach. In Proc. 24th ISPE Inc. International Conference on Transdisciplinary Engineering, IOS Press,
Singapore. 10.-14.07.2017.
Hyperledger. (2018). About Hyperledger, Hyperledger. Retrieved 27.09.2018 from https://www.hyperledger.org/about
Isaja, M. & Soldatos, J. (2018). Distributed ledger technology for decentralization of manufacturing processes. In Proc.
Industrial Cyber-Physical Systems, IEEE, St. Petersburg, Russia. 15.-18.05.2018.
Jackson, A., Lloyd, A., Macinante, J. & Hüwener, M. (2018). Networked Carbon Markets: Permissionless Innovation
with Distributed Ledgers?
Kagermann, H. (2014). Chancen von Industrie 4.0 nutzen. In T. Bauernhansel, M. ten Hompel & B. Vogel-Heuser
(Ed.), Industrie 4.0 in Produktion, Industrie 4.0 in Produktion, Automatisierung und Logistik. Anwendung,
Technologien, Migration (pp. 603-614), Wiesbaden: Springer.
Kerscher, D. (2013). Bitcoin: Funktionsweise, Risiken und Chancen der digitalen Währung. Dingolfing: Kemacon.
Khan, M. A. & Salah, K. (2018). IoT security: Review, blockchain solutions, and open challenges. Future Generation
Computer Systems, 82, 395-411.
Khaqqi, K. N., Sikorski, J. J., Hadinoto, K. & Kraft, M. (2018). Incorporating seller/buyer reputation-based system in
blockchain-enabled emission trading application. Applied Energy, 209, 8-19.
Kiel, D. (2017). What do we know about “Industry 4.0” so far? In Proc. 26th International Association for Management
of Technology Conference, Vienna, Austria. 14.-18.05.2017.
Korpela, K., Hallikas, J. & Dahlberg, T. (2017). Digital Supply Chain Transformation toward Blockchain Integration.
In Proc. 50th Hawaii International Conference on System Sciences, Shidler College of Business, Waikoloa,
USA. 04.-07.01.2017.
Kouicem, D. E., Bouabdallah, A. & Lakhlef, H. (2018). Internet of things security: A top-down survey. Computer
Networks, 141, 199-221.
Kshetri, N. (2017). Blockchain’s roles in strengthening cybersecurity and protecting privacy. Telecommunications
Policy, 41, 1027-1038.
Kshetri, N. (2018). 1 Blockchain’s roles in meeting key supply chain management objectives. International Journal of
Information Management, 39, 80-89.
Kumar, N. M. & Mallick, P. K. (2018). Blockchain technology for security issues and challenges in IoT. Procedia
Computer Science, 132, 1815-1823.
Lee, E. A. (2008). Cyber Physical Systems: Design Challenges. In Proc. 11th IEEE Symposium on Object Oriented
Real-Time Distributed Computing, IEEE, Orlando, USA. 05.-07.05.2008.
Lee, G. M., Crespi, N., Choi, J. K. & Boussard, M. (2013). Internet of Things. In E. Bertin, N. Crespi & T. Magedanz
(Ed.), Evolution of Telecommunication Services. The Convergence of Telecom and Internet: Technologies
and Ecosystems (pp. 257-281), Berlin: Springer.
Li, X., Jiang, P., Chen, T., Luo, X. & Wen, Q. (2017). A survey on the security of blockchain systems. Future Generation
Computer Systems,
Li, Z., Barenji, A. V. & Huang, G. Q. (2018a). Toward a blockchain cloud manufacturing system as a peer to peer
distributed network platform. Robotics and Computer-Integrated Manufacturing, 54, 133-144.
Li, Z., Liu, L., Barenji, A. V. & Wang, W. (2018b). Cloud-based Manufacturing Blockchain: Secure Knowledge Sharing
for Injection Mould Redesign. Procedia CIRP, 72, 961-966.
Li, Z., Wang, W. M., Liu, G., Liu, L., He, J. & Huang, G. Q. (2018c). Toward open manufacturing. Industrial
Management & Data Systems, 118(1), 303-320.
Lin, C., He, D., Huang, X., Choo, K.-K. R. & Vasilakos, A. V. (2018). BSeIn: A blockchain-based secure mutual
authentication with fine-grained access control system for industry 4.0. Journal of Network and Computer
Applications, 116, 42-52.
Lin, L.-C. & Liao, T.-C. (2017). A Survey of Blockchain Security Issues and Challenges. International Journal of
Network Security, 19(5), 653-659.
Madhwal, Y. & Panfilov, P. (2017). Blockchain And Supply Chain Management: Aircrafts’ Parts’ Business Case. In
Proc. 28th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM
International Vienna, Zadar, Croatia. 08.–11.11.2017.
Marfia, G. & Degli Esposti, P. (2017). Blockchain and Sensor-Based Reputation Enforcement for the Support of the
Reshoring of Business Activities. In A. Vecchi (Ed.), Reshoring of Manufacturing. Drivers, Opportunities,
and Challenges (pp. 125-139), Berlin: Springer.
Mattila, J. (2016). The Blockchain Phenomenon. The Disruptive Potential of Distributed Consensus Architectures
(ETLA Working Papers Nr. 38). Research Institute of the Finnish Economy.
Mattila, J. & Seppälä, T. (2015). Blockchains as a Path to a Network of Systems. An Emerging New Trend of the Digital
Platforms in Industry and Society (ETLA Reports Nr. 45). Research Institute of the Finnish Economy.
Mattila, J., Seppälä, T. & Holmström, J. (2016). Product-centric Information Management: A Case Study of a Shared
Platform with Blockchain Technology. In Proc. Industry Studies Association Conference, Minneapolis,
USA. 24.-26.05.2016.
Maull, R., Godsiff, P., Mulligan, C., Brown, A. & Kewell, B. (2017). Distributed Ledger Technology: Applications and
implications. Strategic Change, 26, 481-489.
Meitinger, T. H. (2017). Smart Contracts. Informatik-Spektrum, 40(4), 371-375.
Miller, M. (2015). The Ultimate Guide to Bitcoin. Indianapolis, USA: Que.
Mondragon, A. E. C., Mondragon, C. E. C. & Coronado, E. S. (2018). Exploring the applicability of blockchain
technology to enhance manufacturing supply chains in the composite materials industry. In Proc. International
Conference on Applied System Invention, IEEE, Chiba, Japan. 13.-17.04.2018.
Nakamoto, S. (2008). Bitcoin: A Peer-to-Peer Electronic Cash System.
Nowiński, W. & Kozma, M. (2017). How Can Blockchain Technology Disrupt the Existing Business Models?
Entrepreneurial Business and Economics Review, 5(3), 173-188.
Obermaier, R. (2016). Industrie 4.0 als unternehmerische Gestaltungsaufgabe: Strategische und operative Handlungsfelder
für Industriebetriebe. In R. Obermaier (Ed.), Industrie 4.0 als unternehmerische Gestaltungsaufgabe.
Betriebswirtschaftliche, technische und rechtliche Herausforderungen (pp. 3-34), Wiesbaden: Springer.
Okoli, C. & Schabram, K. (2010). A Guide to Conducting a Systematic Literature Review of Information Systems
Research.
Ostern, N. (2017). Typology of Distributed Ledger Based Business Models. In Proc. 25th European Conference on
Information Systems, Guimaraes, Portugal. 05.-10.06.2017.
Pinheiro, P., Marcedo, M., Barbosa, R., Santos, R. & Novais, P. (2018). Multi-agent Systems Approach to Industry 4.0:
Enabling Collaboration Considering a Blockchain for Knowledge Representation. In Proc. 16th International
Conference on Practical Applications of Agents and Multi-Agent Systems, Toledo, Spanien. 20.-22.06.2018.
Plattform Industrie 4.0. (2015). Industrie 4.0: Whitepaper FuE-Themen. Berlin.
Posadas, D. (2018). The Internet of Things: The GDPR and the Blockchain May Be Incompatible. Journal of Internet
Law, 21(11), 20-29.
Preuveneers, D., Joosen, W. & Ilie-Zudor, E. (2017). Trustworthy data-driven networked production for customer-
centric plants. Industrial Management & Data Systems, 117(10), 2305-2324.
Prinz, W., Rose, T., Osterland, T. & Putschli, C. (2018) Blockchain. Verlässliche Transaktionen. In R. Neugebauer
(Ed.), Digitalisierung. Schlüsseltechnologien für Wirtschaft & Gesellschaft (pp. 311-319), Berlin: Springer.
Reyna, A., Martín, C., Chen, J., Soler, E. & Díaz, M. (2018). On blockchain and its integration with IoT. Challenges and
opportunities. Future Generation Computer Systems, 88, 173-190.
Rosenberger, P. (2018). Bitcoin und Blockchain. Vom Scheitern einer Ideologie und dem Erfolg einer revolutionären
Technik. Berlin: Springer.
Roth, A. (2016). Industrie 4.0 - Hype oder Revolution? In A. Roth (Ed.), Einführung und Umsetzung von Industrie 4.0.
Grundlagen, Vorgehensmodell und Use Cases aus der Praxis (pp. 3-14), Berlin: Springer.
Roth, A. & Siepmann, D. (2016). Industrie 4.0 - Ausblick. In A. Roth (Ed.), Einführung und Umsetzung von Industrie
4.0. Grundlagen, Vorgehensmodell und Use Cases aus der Praxis (pp. 249-259), Berlin: Springer.
Schlatt, V., Schweizer, A., Urbach, N. & Fridgen, G. (2016). Blockchain: Grundlagen, Anwendungen und Potenziale.
Projektgruppe Wirtschaftsinformatik Fraunhofer Instituts für Angewandte Informationstechnik.
Schütte, J., Fridgen, G., Prinz, W., Rose, T., Urbach, N., Hoeren, T. et al. (2017). Blockchain und Smart Contracts -
Technologien, Forschungsfragen und Anwendungen. Fraunhofer.
Sikorski, J. J., Haughton, J. & Kraft, M. (2017). Blockchain technology in the chemical industry: Machine-to-machine
electricity market. Applied Energy, 195, 234-246.
Sklaroff, J. M. (2017). Smart Contracts and the cost of inflexibility. University of Pennsylvania Law Review, 166,
263-303.
Soni, G. & Kodali, R. (2011). A critical analysis of supply chain management content in empirical research. Business
Process Management Journal, 17, 238-266.
Swan, M. (2015). Blockchain. Blueprint for a New Economy. Sebastopol, USA: O’Reilly.
Tan, L. & Wang, N. (2010). Future Internet: The Internet of Things. In Proc. 3rd International Conference on Advanced
Computer Theory and Engineering, IEEE, Chengdu, China. 20.-22.08.2010.
Tapscott, D. & Tapscott, A. (2016). Die Blockchain Revolution. Wie die Technologie hinter Bitcoin nicht nur das
Finanzsystem, sondern die ganze Welt verändert. Kulmbach: Plassen.
Teslya, N. & Ryabchikov, I. (2017). Blockchain-based platform architecture for industrial IoT. In Proc. 21st Conference
of Open Innovations Association, IEEE, Helsinki, Finnland. 06.-10.11.2017.
Teslya, N. & Ryabchikov, I. (2018). Blockchain Platforms Overview for Industrial IoT Purposes. In Proc. 22nd
Conference of Open Innovations Association FRUCT, Jyvaskyla, Finland. 15.-18.05.2018.
Tranfield, D., Denyer, D. & Smart, P. (2003). Towards a methodology for developing evidence informed management
knowledge by means of systematic review. British Journal of Management, 14, 207–222.
Van Alstyne, M. (2014). Why Bitcoin has value. Communications of the ACM, 57(5), 30-32.
Voshmgir, S. (2016). Blockchains, Smart Contracts und das Dezentrale Web. Berlin: Technologiestiftung Berlin.
Voshmgir, S. (2017). Disrupting governance with blockchains and smart contracts. Strategic Change, 26, 499–509.
Walport, M. (2016). Distributed Ledger Technology: beyond block chain. London, UK: Goverment Office for Science.
Weber, I., Xu, X., Rivert, R., Governatorit, G., Ponomarev, A. & Mendling, J. (2016). Untrusted Business Process
Monitoring and Execution Using Blockchain. In Proc. International Conference on Business Process
Management, Rio de Janeiro, Brazil. 18.-22.09.2016.
Webster, J. & Watson, R. T. (2002). Analyzing the Past to Prepare for the Future: Writing a Literature Review. MIS
Quarterly, 26(2), 13-23.
Winter, M. & Knemeyer, A.M. (2013). Exploring the integration of sustainability and supply chain management:
current state and opportunities for future inquiry. International Journal of Physical Distribution & Logistics
Management, 43, 18-38.
Witt, J. & Richter, S. (2018). Ein problemzentrierter Blick auf Blockchain-Anwendungsfälle. In Proc. Multikonferenz
Wirtschaftsinformatik, Leuphana Universität Lüneburg, Lüneburg. 06.-09.03.2018.
Wortmann, F. & Flüchter, K. (2015). Internet of Things. Technology and Value Added. Business & Information Systems
Engineering, 57(3), 221-224.
Yli-Huumo, J., Ko, D., Choi, S., Park, S. & Smolander, K. (2016). Where Is Current Research on Blockchain
Technology? - A Systematic Review. PLoS ONE, 11(10).
Zhang, F., Liu, M. L. & Shen, W. (2017). Operation modes of smart factory for high-end equipment manufacturing in
the Internet and Big Data era. In Proc. IEEE International Conference on Systems, Man, and Cybernetics,
IEEE, Banff, Kanada. 05.-08.10.2017.
Zhao, L. J., Fan, S. & Yan, J. (2016). Overview of business innovations and research opportunities in blockchain and
introduction to the special issue. Financial Innovation, 28(2).
Zheng, Z., Xie, S., Dai, H., Chen, X. & Wang, H. (2017). An Overview of Blockchain Technology: Architecture,
Consensus, and Future Trends. In Proc. 6th International Congress on Big Data, IEEE, Honolulu, USA.
25.-30.06.2017.
Zheng, Z., Xie, S., Dai, H., Chen, X. & Wang, H. (2018). Blockchain Challenges and Opportunities: A Survey.
International Journal of Web and Grid Services, 14(4), 352-375.
Sóstenes Postigo
Faculty of Medical Sciences of Santa Casa de Misericórdia
de São Paulo / São Paulo, Brazil
E-mail: sostenes.p@uol.com.br
Abstract
The process of scientific and technological innovation in medications brings to the fore the debate on other
fundamental issues concerning Brazilian independence in research and technology: drug patents, economic growth
and public health. In the context of the Brazilian health system, pharmaceutical patents are a topic of heated
debate. One side promotes the discourse advocating a strengthening of the pharmaceutical industry, extolling the
importance of patents for therapeutic innovation and for enhanced well-being associated with the resultant lower
morbidity and mortality rates of the population. The other side voices concerns over the effects of imposing
barriers to access for more effective treatments and their consequences for public health. The objective of this
study is to present a temporal analysis on the effects of Brazilian public policies for the pharmaceutical sector on
the process of innovation and economic growth, the importance of intellectual property and compulsory licensing
as safeguards in public health. The methodology entails an integrative review, using an approach allowing the
inclusion of experimental and non-experimental studies, to provide a broader understanding of the phenomenon
analyzed. The review also draws data from the theoretical and empirical literature, besides encompassing a broad
range of topics: definition of concepts, review of theories and evidence, and analysis of methodological problems
of the topic studied, namely, innovation, technological development and intellectual property in the pharmaceutical
sector and implications for public health. A total of 22 articles were selected from leading business journals,
congress annals, collected editions, and reports by research institutions, published between 2008 and 2017. The
pharmaceutical industry constitutes a central segment and key driver of its involvement in local and global markets.
The sector has numerous multinational companies which take decisions at a local level and are highly dynamic
both in terms of localization of their companies and levels of national specialization. Amid the innovations and
new processes developed worldwide, Brazil has promoted government actions to promote national production.
The synergic and propitious raft of national policies for health, the industry, technology and foreign trade, among
others – poses a challenge and opportunity in reducing Brazilian vulnerability and strengthening the system of
innovation in healthcare. Intellectual property rights are fundamental strategic assets. However, compulsory
licensing and the development of effective juridical and administrative structures are also important. Further in-
depth studies are warranted employing tools that can overcome present limitations and better elucidate elements
affecting public policies in research and development, economic growth, market prices of patented drugs in Brazil,
as well as public expenditure on patented drugs and on public health. The present study contributes by identifying
some of these elements influencing and impacting the dynamic of innovation in the pharmaceutical industry and
promoting relevant debate by addressing issues involving Brazilian public policies and pharmaceutical patents,
and in discussing ways to support the policy of universal access to healthcare and of industrial and technological
development in Brazil.
Keywords: Healthcare Policies, Brazilian National Health Service (Sus), Pharmaceutical Industry
1. Introduction
All The pharmaceutical industry developed along with the progress of medicine and the advancement
of medical, chemical, biological and pharmacological research from the 19th century.
This industry is characterized by its high dynamism and its capacity to be one of the most globalized
industries in the world, growing at rates higher than those experienced by the world economy and
showing a growing importance in intra-firm international trade, due to the existence of a strategy of
international distribution of productive activities by multinationals. These characteristics stimulate
the entry of new bidders into the global pharmaceutical market, but there is a lot of resistance as
this industry is associated with the need for high R & D and marketing expenditures, as well as in
the patent protection system, the control of supply of active principles and the reputation of leading
laboratory brands. It is characterized by a structurally concentrated and oligopolistic market, with a
relatively small number of large multinational companies and a large number of small and medium-
sized firms acting in a complementary way to large laboratories. (Bertola, 2006).
According to data from IMS Health (2007), the world pharmaceutical market grew by 7% in 2006, at
constant exchange rates, which represented approximately US $ 643 billion. This growth is based on
maintaining the growth of population longevity, strong economies and the emergence of innovative
products. In 2009, the market grew 7%, which represented US $ 837 billion, compared to a growth
rate of 4.8% in 2008 (IMS HEALTH, 2010).
Some studies (BERTOLAI, 2006; TICKELL, 2004) show that the pharmaceutical industry in the world
presents high growth rates and technological innovation, well above the industry average as a whole,
and is structured as highly concentrated in large multinational laboratories in developed countries, and
that the stages of drug production and especially of R & D are concentrated in developed countries,
while developing countries operate in the stages of production of pharmaceutical specialties in the
conduct of clinical trials, especially in phases 3 and 4, and marketing and marketing of these drugs.
In the scope of the pharmaceutical industry four technological stages are present: stage I -
research and development of new drugs; stage II - production of new drugs; stage III - clinical
research and production of pharmaceutical specialties (medicines); stage IV - marketing and
commercialization of pharmaceutical specialties. These stages define the degree of mastery of
the productive process that has been achieved by the states that have been most industrialized.
In states with less development potential, stages I and II are practically zero (FOTA, 1993;
QUEIROZ; GONZÁLEZ, 2001).
In Brazil, the pharmaceutical industry began to be structured in the 1930s, although at the time local
production was small and dependent on imports of inputs. It originated in family establishments,
through the manipulation of natural substances of vegetable, animal or mineral origin. Afterwards, it
is characterized by the development of biological products to combat epidemic outbreaks in regions
of the country, which motivated the creation by the government of laboratories qualified for research
and production of vaccines and serums, such as Instituto Butantã (1889) and Oswaldo Institute Cross
(1902). And the third period began after World War II, generating a technological gap between the
Brazilian industry and that of the more developed states, which started investing more in research
and development of new products (Fleota, 1993);
In the 1950s, there was a jump in the share of foreign-origin companies in domestic production,
reaching 35 percent in 1940 and 73 percent in 1960. On the other hand, once multinational
corporations internalized production, there was a certain reduction of imports of drugs at a residual
level, while the drugs required for domestic production continued to be imported in increasing
quantities. (PALMEIRA FILHO, PAN, 2003)
The process of scientific and technological innovation in medicines brings to the fore the debate
on other fundamental issues regarding Brazilian autonomy in research and technology: the need to
stimulate innovation and investment in pharmaceutical R & D, protection and compulsory licensing
in the area of public
health.
The objective of this study is to present the temporal analysis on the effects of Brazilian public
policies for the pharmaceutical sector on the process of innovation and economic growth, the
importance of intellectual property and compulsory licensing as safeguards in public health.
The methodology entails an integrative review, using an approach allowing the inclusion of
experimental and non-experimental studies, to provide a broader understanding of the phenomenon
analyzed. The review also draws data from the theoretical and empirical literature, besides
encompassing a broad range of topics: definition of concepts, review of theories and evidence,
and analysis of methodological problems of the topic studied, namely, innovation, technological
development and intellectual property in the pharmaceutical sector and implications for public
health. A total of 22 articles were selected from leading business journals, congress annals, collected
editions, and reports by research institutions, published between 2008 and 2017.
or similar) - mere copy of the compound, unless it adds some value, eg the introduction of a new
excipient to improve the absorption of the drug by the organism.
The innovation considered most important in the pharmaceutical sector occurs in product
development, for which there is a permanent search for increased effectiveness, safety of use and
reduction of side effects. This process comes about by changing the characteristics of the drug,
to make it more effective and to cause less adverse or collateral effects; and by changes in the
composition of the other components of the formulation to potentiate the action of the drug, such as
altering the rate of its release in the body (PALMEIRA FILHO; PAN, 2003).
The ability to perform the discovery of a new molecule with therapeutic potential (active principle)
is the most advanced technological competence. Industrial production technologies, both
pharmaceuticals and pharmaceutical specialties, as well as marketing and marketing are not difficult
to master in terms of the degree of technological complexity.
As already explained, the technological stages are basically four: a) Stage I - Research and
Development (R & D); b) Stage II - Production of Phytochemicals; c) Stage III - Production of
Pharmaceutical Specialties; and Stage IV - Marketing and Commercialization of Pharmaceutical
Specialties (FRENKEL, 1978; QUEIROZ; GONZÁLEZ, 2001).
In Stage I, there are developed countries, where there is capacity to perform all stages, from
basic research, ie chemical research for isolation and development of new molecules, until the
commercialization of medicines. The countries in Stage II are those that have reasonable industrial
capacity for fine chemicals, producing their inputs. Stage III is carried out in countries that have a
reasonable ability to formulate medicines and master production activities, even when they import
practically all the raw materials they need. Stage IV does not require any productive capacity and can
occur even in small countries, without local pharmaceutical production, where even the final drugs
are imported, leaving only the marketing activities to the companies.
The countries that dominate the first two stages are those who are at the forefront of chemical
and pharmacological research and have achieved maturity in both academic research and the
state regulatory apparatus, as is the case in the USA, the United Kingdom and Germany. The
incorporation of each of these stages implies the transposition of significant barriers, both economic
and institutional, requiring the support of medium and long-term government and business policies
(FRENKEL, 2002).
In relation to Brazil, Queiroz et al. (2002) highlight a number of factors, including a national drug-
manufacturing industry with low technological capacity, a drug-manufacturing industry dominated
by foreign companies that do not conduct research in the country, a medical equipment sector in
which Brazilian companies produce products with low added value, while those with external capital
dominate the more complex production, but with high import content. A relevant public health
concern is the logic of investments and their low relation to the needs of the population, especially
those poorer and rural, still subject to the incidence of diseases in less developed countries.
The actions of the government focus on a system of innovation in health that does not show the same
dynamism observed in countries with more advanced industrial and socioeconomic development,
both due to the nature dependent on the national industry and their behavior, but not less important,
also of the oscillations in the general panorama of the industrial and technological policy of the
country and its dependent insertion in the scenario of the world economy (FIALHO, 2001).
According to Gadelha, Quental and Fialho (2003), innovation takes place in a perspective that
considers the dynamics, both of the economy of the institutions and of public policy, starting from
some evidences: a) the health area constitutes one of the economic spaces of greater dynamism in
the accumulation of capital and innovation; b) the systemic character involves the generation of
innovations of products and processes, as well as organizational innovations in the health area;
c) health remains one of the areas of greater state intervention, both in the service sector and in
scientific and technological activities.
Some authors (Albuquerque and Cassiolato, 2000; Gadelha, Quental and Fialho, 2003; Albuquerque,
Souza and Baessa, 2004) have contributed to delimit the national health innovation system as an
economic, political and institutional construction for which converges interests derived from both
business strategies in the different health industries and in science and technology institutions and
from the pressure of civil society for the provision of health services that meet the requirements of
access, full actions and equity. Within this system, it is incumbent upon the State to act as mediator
between the supply and demand of goods and services, facing the challenge of combining issues
related to health promotion and industrial and technological development in the area.
From the point of view of public instruments, the State has a broad and growing role in health,
constituting an important field for the establishment of industrial development strategies, linked to
the use of state purchasing power, National Bank for Social Development, to the performance of the
network of public producers, to the use of legal mechanisms related to the regulatory framework,
such as compulsory licenses to serve the public interest.
Criação
dos
fundos Pro-
setoriais
f
PITCE
Lei da
Criação inovaçã
da
Anvisa
I Conferên-
cia
Modelo de Predominância Lei das Forum
Lei dos Nacional de
substituição de de políticas Patentes de Ciência
Genéricos
importação horizontais competi Tecnologia
vidade e Invoação
Figure 1: Evolution in Time of the Industrial Policy Instruments for the Pharmaceutical Sector
Source: Adapted from Barbosa, Mendes and Sennes, 2007; Kamimura and Cornetta (2015).
Transformations of the pharmaceutical industry in Brazil Continuing the world scenario, the Brazilian
pharmaceutical sector, from the beginning of the 20th century until the 1930s, was more focused
on the production of vaccines. According to Pinheiro (1999, p. 167), “until the 1930s the country
presented only a more pronounced industrial development regarding the fight against epidemic
outbreaks.” In the 1940s and 1950s, the period of validity of the National-Developmental State, the
transnational pharmaceutical industries began to come to Brazil. This period favored the entry of
foreign capital into the country, making the economy and industry vulnerable to these companies.
In the 1960s and 1970s, it is worth highlighting the emergence of new proposals regarding the issue
of drug supply by the Brazilian public sector. Among them, the creation plan of a state-owned
company Farmoquímica Brasileira SA (Farmobrás SA), which was not implemented, the foundation
of the CEME and the continuation of the process of creating official laboratories, dating from the
beginning of the century (BERMUDEZ, 1995). In the 1980s, the Federal Constitution was enacted,
which advocated health as the right of everyone and the duty of the State, and the institution of the
Unified Health System (SUS). In this context of universal and equal access to health and medicines,
the Brazilian pharmaceutical sector was still characterized by the continued dependence on the
transnational pharmaceutical industries, concentrated and oligopolized, where these industries were
not interested in investments in R & D, but in marketing. In the 1990s, the Brazilian pharmaceutical
industry, following the molds of the world pharmaceutical industry, was characterized by a high
degree of concentration, vertical integration and the processes of acquisitions and mergers, with
consequent changes in its patterns of oligopolistic competition. However, it is worth noting during
this period that the pharmaceutical industry in Brazil opted for
Until 1970, Brazil admitted patents for processes, not for products. During the 1990s, a horizontalist
approach to industrial policy in the country was based on the linear reduction of tariffs and the
absence of policies for specific sectors in a context of strong exchange appreciation in 1994 and
1998. One example of this industrial policy option was the extinction of Annex C of CACEX10 in
1993, which included raw materials, inputs and additives used in the local manufacture of medicines
(BARBOSA, MENDES and SENNES, 2007).
In this context, foreign-owned companies operating in the domestic market started to present high
trade deficits. The import / export ratio of pharmochemicals jumped from 3.8 to 7.3 between 1990
and 1999 (Capanema and Palmeira, 2004), promoting a process of reduction of the productive chain
of the sector and transforming the country into a marginal producer and exporter, pharmaceuticals in
low-value-added segments and stages.
The Industrial Property Law, passed in 1996 after a long period of debate between those in favor and
those against it, came into force in 1997. The horizontalist view of industrial policy lost momentum
when the 1999, directly focused on the pharmaceutical chain, and with important impacts on the
sectoral market structure. It is also worth mentioning the creation of ANVISA in the same year.
In 2003, the Ministry of Development, Industry and Foreign Trade (MDIC), together with other
ministries, started the Forum on Competitiveness of the Pharmaceutical Production Chain, with
the objective of increasing the production of medicines and drugs, and also, with facilitate the
population’s access to medicines distributed by the Ministry of Health. In 2004, it launched the
Technological Industrial and Foreign Trade Policy (PITCE). In that same year, BNDES started
Profarma as an instrument to support the implementation of PITCE.
The MCT launched in 2007 the PACTI - Action Plan on Science, Technology and Innovation for
National Development
If, on the one hand, at the international level, emphasis is placed on the strengthening of industrial
property rights and the establishment of appropriate measures against perpetrators of rape, on the
other hand, abusive conduct on the part of rightholders motivates the development and application
of safeguards.
The advent of the Trips agreement on intellectual property and international agreements,
to which Brazil is a signatory, and its incorporation into the legal system of countries, has
increased the discussion on access to medicines. Other factors, such as the accelerated
diffusion of AIDS and the re-emergence of diseases such as tuberculosis, have contributed
to the deepening of debates on access to medicines in developing countries and industrial
property relations (MONIZ, et al., 2005).
Patent breach is the popular term for the compulsory license instrument, misused, since the patent
still exists. Compulsory licenses are measures supported by legal channels (international treaties and
national laws) in force in national territory. They are safeguards intended to promote public interests,
taking into account property rights. Prevent abuses that may result from the exercise of the exclusive
right conferred by the patent.
The effect of Law No. 9,279 in the pharmaceutical area was a general increase in the filing of
patent applications at the National Institute of Intellectual Property (INPI), mainly by non-residents.
Residents’ participation in the filing of patent applications is very low, evidencing a framework of
technological fragility (OLIVEIRA, et al., 2004).
In 2001 and 2005, the threat of compulsory licensing of antiretroviral drugs by the Ministry of
Health produced price cuts. The application of the compulsory license instrument took place in May
2007 after the issuance of ordinance no. 886, of April 25, 2007, that declares of public interest, for
five years and foreseen to renew for an equal period.
The measure taken in May 2007 - although applauded from the point of view of the immediate
concern to reduce the market power of the company and increase the coverage of the anti-AIDS
program - will have to consider the difficulty in translating into internalisation of production or in
significant advance of the capacity of innovation of the public laboratories, and especially refer to
the need of celerity in the technological advance of the sector.
In the evolutionary process of the national system of innovation in health, in 2011 the social
participation in number of participants was increased, from five to thirteen and in representation
through CONITEC (National Commission for the Incorporation of Technologies).
The National S & T Code - changes and adds provisions in the Federal Constitution to update the
treatment of Science, Technology and Innovation activities.
access to effective and safe technologies, in conditions of equity” (BRAZIL, 2010, p.15). In 2011,
it expanded its participation in CONITEC, which replaced CITEC, through various social actors,
which influence, given their respective representativeness, in the decisions and impacts for public
health and the industrial and technological development of health and the country.
In relation to public policies, in Brazil, the challenges are present, in the attribution of the State to
act as intermediary in conflicts of interest (private companies and government) and in combining
issues related to health promotion and the industrial and technological development of the country .
Another trend of the Brazilian pharmaceutical industry is the investment, still incipient, in the
phytotherapeutic and biotechnological medicines, through the financial support of the BNDES.
There is also the fact that, in Brazil, the state is the largest buyer of the private segment of the
pharmaceutical sector, despite the increase in R & D and drug production by official Brazilian
laboratories. Regarding the challenges facing the global and Brazilian pharmaceutical sector, it
should be emphasized that competitiveness must not be eliminated by the formation of large cartels,
and that regulatory apparatuses must adapt to the new world and national contexts. In addition,
the possibility of increased conflicts between regulatory bodies and regulated entities represents
a large scale. It is worth highlighting the challenges related to drug costs and their strong impacts
on health systems, especially those of a more inclusive nature. In Brazil, an additional challenge is
to promote the convergence of the ducts of the Unified Health System (SUS), Anvisa and CADE.
Thus, to reconcile the conduct of these different institutions is a requirement for the policy of access
to medicines to be effective in Brazilian society, making in fact an attribute of Brazilian citizenship.
References
ALBUQUERQUE, E .; CASSIOLATO E. The Specificities of the Health Sector Innovation System: a review of the
literature as an introduction to a discussion about the Brazilian case. Belo Horizonte: Fesbe, 2000.
ALBUQUERQUE, E.; SOUZA, S.; BAESSA, A. Research and innovation in health: a discussion from the literature on
the economics of technology. Ciência & Saúde Coletiva, 9 (2): 277-294, 2004.
BARBOSA, A .; MENDES, A. & SENNES, R. Evaluation of industrial and technological policy and foreign trade for
the pharmaceutical sector. Studies Febrafarma, 13. São Paulo: Brazilian Federation of the Pharmaceutical
Industry, 2007.
CAPANEMA, L .; PALMEIRA FILHO, P.L. “The Pharmaceutical Chain and the Industrial Policy: A Proposal for the
Insertion of BNDES”. BNDES Sectoral, 19. Rio de Janeiro: BNDES, Mar. 2004.
CHINEN, A. Know How and industrial property. São Paulo: Oliveira Mendes and Del Rey, 1997, p. 33.
FRENKEL, J. Technology and competition in the Brazilian pharmaceutical industry. Rio de Janeiro: Finep / CEP /
Gepetec, 1978.
FRENKEL, J. Study of the competitiveness of integrated chains in Brazil: impacts of free trade zones (Chain:
Pharmaceutical). Campinas: IE / NEIT / Unicamp / MCT / Finep, 2002. (Final Technical Note).
FROTA, M. S. P. B. B. Patent Protection of Pharmaceutical Products: the Brazilian case. Brasília, FUNAG-IPRI, 1993, p. 69.
GADELHA, C. A. Biotechnology in Health: a study of the technological change in the pharmaceutical industry and
perspectives of its development in Brazil. Master’s Dissertation, Campinas: Institute of Economics, State
University of Campinas, 1990.
GADELHA, C.A.G. The industrial health complex and the need for a dynamic focus on health economics. Ciência &
Saúde Coletiva, 8 (2): 521-535, 2003.
GADELHA, C.A.G .; QUENTAL, C. & FIALHO, B.C. HEALTH AND INNOVATION: A SYSTEMATIC
APPROACH OF THE HEALTH INDUSTRIES. Cadernos de Saúde Pública, 19 (1): 47-59, 2003.
IMS HEALTH. IMS Health Investor Briefing. Mímeo, april, 2011. Available at http://ir.imshealth.com/phoenix.
zhtml?c=67124&p=irol-irhome. Accessed in April 2011.
KAMIMURA, Q. P .; CORNETTA, V.K. Intellectual Property: Challenges to Public Health. Laes Haes Journal, 2015.
PALMEIRA FILHO, P.L .; PAN, S.S.K. Pharmaceutical chain in Brazil: preliminary evaluation and perspectives.
BNDES Sector. Rio de Janeiro: n. 18, p. 3-22, set. 2003.
PALMEIRA FILHO, P. L .; PAN, S. S. K. Pharmaceutical chain in Brazil: preliminary evaluation and perspectives.
BNDES Setorial, Rio de Janeiro, n. 18, p. 3-22, set. 2003.
QUEIROZ, S. R. R .; BONACELLI, M.B. M .; MELLO, D. L .; JÔLO, F. S. The CNPq and the Health Innovation
System in Brazil: An Analysis from the Research Groups of the Health Sector. XXII Symposium on the
Management of Technological Innovation. Salvador, 2002.
QUEIROZ, S. R. R .; GONZÁLES, A. J. V. Recent changes in the productive structure of the pharmaceutical industry.
In: NEGRI, B .; DI GIOVANI, G. (Org.). Brazil: health x-ray. Campinas: Institute of Economics / State
University of Campinas (IE / Unicamp), 2001, p. 123-156.
SANTORO, F. M. Innovation and evolutionary path in the pharmaceutical industry: the cases of Argentina and Spain.
Cadernos de Gestão Tecnológica, n. 48. São Paulo: CYTED-PGT / USP, 2000.
Amr M.A.
Nile University, Management of Technology School, Egypt
E-mail: mamr@nu.edu.eg
Eljazzar M.M.
Cairo University, School of Communication, Egypt
E-mail: mmjazzar@ieee.org
Kassem S.S.
Nile University, School of Industrial and
Service Engineering and Management, Egypt
E-mail: skassem@nu.edu.eg
Ezzat M.
Nile University, School of Industrial and
Service Engineering and Management, Egypt
E-mail: mezzat@nu.edu.eg
Abstract
Technology is a significant component in our everyday life. Many definitions exist for technology, one of which
is “all the knowledge, products, processes, tools, methods and systems employed in the creation of goods or in
providing services”. Due to the impact of technological innovations on organizations, competitiveness levels are
raised noticeably. Hence, reliable means of information exchange and assets tractability are needed, leading to new
challenges facing organizations. This paper introduces different scenarios for solving these challenges utilizing the
technology of Blockchain. In this work, Blockchain is utilized to address data transparency and resource sharing
issues within supply chains. An interdisciplinary approach is adopted in this work, where Blockchain technology,
Information technology (IT) and supply chain process technologies are merged to introduce the developed scenarios.
The interaction of these technologies results in enhancing supply chain processes in the areas of: information,
demand forecasting and resources.
Keywords: Supply Chain, Blockchain, Data Transparency, Resource Sharing, Technology
1. Introduction
Since the rise of the 20th century, the dependency of businesses on supply chains has increased.
Supply chains have become a vital business process that can encourage the competitiveness of a
business in the market. It has been recently emphasized that the success of a company is based
on the interaction between the flow of information, materials, workers, and equipment. Logistics
have been playing a major role in achieving an effective value proposition to the customers as
defined by Kshetri (2018). The author clearly mentioned that retail business logistics are essential
for creating business value as he defined the logistics as “The integrated management of purchasing,
transportation and storage on functional basis”.
Supply chain management was used for decades to deliver goods. Later, the supply chain management
concept changed from focusing just on logistics to become mandatory to track and manage other
flows with in the supply chain. Such flows include, flow of money and flow of information. There
are billions of products being manufactured every day through complex systems of supply chains
that extend to all parts of the world. Several questions regarding these products arise. For example,
what was the origin of these products, where they were manufactured, when, how, and how they were
utilized throughout their entire life cycle. Even before reaching the end customer, these products
move through a wide network of retailers, distributors, transporters, warehouses, and suppliers. All
these stages and functions play a role in every process in the supply chain (i.e. design, production,
delivery, sales, etc...).
Most of these processes need quick actions. Unfortunately, little information is available during the
supply chain life cycle. This is considered among the major challenges in the supply chain domain.
Blockchain – a kind of distributed ledger technology—has been described as the next industry
revolution. Blockchain is a data structure format that makes it possible to create a stack of existence
with a specific time stamp for each digital asset. This could be helpful to sign each transaction in
a distributed digital ledger Lummus, R. R (2001). Due to the above challenges, the main purpose
of this paper is to introduce the merge between Blockchain and supply chain. The rest of the paper
is organized as follows: In section 2, previous work considering adopting Blockchain in the supply
chain domain is presented. In Section 3, investigates different applications of Blockchain. In section
4, a short description of implementation is given. Finally, Section 5 provides conclusion of the paper.
2. Literature Review
Advances in technology and complex production systems result in increasing supply chains’
complexity. In addition, supply chains are getting more extended and global. This results in
increasing the complexity of systems traceability in supply chains. Folinas et. al. (2006) mentioned
that an efficient traceability system should be able to track and trace digital units. Tjandra and Tan
(2002) added that for a traceability system to be efficient it should be able to track and trace digital
entities in a way that facilitates real time monitoring starting at early production stages and ending
at the end the consumer.
Internet of things has been recognized as a tool for systems traceability in supply chains. For
example, Mattoli (2009) develop a Flexible Tag Data-logger (FTD) based on RFID. FTD is attached
to wine bottles upstream in the supply chain to collect and store data as the bottles move along the
supply chain. Data collected are environmental measures, such as light, humidity, and temperature.
Bottles are traced until they reach supermarkets where they are sold to the end customer. Stored
data may be retrieved using smart phones with integrated infrared ports. The entire process aims at
evaluating wine bottles’ safety as they move across different supply chain stages.
According to Mattoli, V (2009), the digital supply chain may be described by the ability to exchange
information among supply chain stages to enhance communication between stakeholders in the
chain. Such information includes: financial, production, design, research, and/or competition.
As every piece of information stored affects the forecasting in supply chain, several models are
developed to collect these features (gathered information), then optimize the forecasting. This in
turn, reflects the accuracy of forecasting models to supply chain demand.
With the wide spread use of Internet of Things, the flow, sharing, and processing of information
cannot be limited to business processes, it is rather extended to include a large amount of data from
low resourced users, e.g. devices, sensors and, social media applications, etc. Moreover, it is essential
to detect casual events when forecasting, for example, weekends, public holidays, sudden events
which are reflected in the decision-making and actions Eljazzar and Hemayed (2016). Integrated
supply chain information models are an essential feature at the current time. Information integration
and service automation are recognized as important business drivers.
All the previous work is based on the using data centralized systems. Data centralized systems
have been the main conceivable approach to achieve information transparency along supply chains.
Recently, with the raise of Blockchain, a new approach has captured the attention of researchers in
different domains in public services, Internet of Things (IoT), smart cities, reputation systems and
security services, Elgazzar and Hemayed (2016), Azaria and Ekblaw (2016).
Supply chain is not far away from Blockchain. Zyskind and Nathan (2015) discussed the benefits of
merging Blockchain technology and manufacturing supply chain. They listed the main characteristics
of a proper Blockchain software architecture. They mainly included promoting trust through
transparency and traceability in the supply chain network. In addition to the transparency within
different transactions of information, products, and/or financial entities, Blockchain is capable of
providing an innovative network with a mechanism that supports decentralization and transactions’
transparency. This mechanism could be applied in different industries and businesses. The authors
describe, through an example, how Blockchain might be utilized in a global supply chain network.
McConaghy et. Al. (2016) introduced the BigchainDB. BigchainDB acts as a distributed database
(DB) utilizing Blockchain features. Therefore, BigchainDB acquires the characteristics of distributed
databases, namely, linear scaling in throughput and capacity optimized querying. Moreover, the
main Blockchain feature is decentralization, immutability for creation & movement of digital assets.
According to the discussion above, it can be concluded that Internet of Things has been utilized for
supply chain traceability. Nevertheless, most of the work done considers centralized systems that
suffer from several drawbacks. These drawbacks could be overcome using Blockchain technology.
Therefore, the contribution of (Nir Kshetri, 2018) discussed the roles of Blockchain in meeting the
objectives of the supply chain management through exploring different case studies and initiatives.
In the next section, the benefits of merging Blockchain with supply chain are presented. These
benefits include: services’ cost-effectiveness and value-creating activities that are expected to
be advantageous to many actors in the system. Examples of these actors include: firms and their
suppliers, employees and customers. The benefits of Blockchain technology in supply chains could
be seen across two domains, namely, data transparency and resource sharing.
3. Data Transperancy
The main advantage and impact of the Blockchain is the trust of transactions and the ability to
share assets. Every transaction is trusted and secured due to the presence of ledgers. A ledger
is a consensus of replicated, shared, and synchronized digital data geographically spread across
multiple sites, countries, or institutions. There is no central administrator or centralized data storage.
Accordingly, Blockchain users are given the ability to share assets without concerns regarding their
protection. In this section, a short a review for two scenarios on how information flows through the
supply chain could be empowered using Blockchain.
registered in the Blockchain network with a time stamp. Such accurate information is expected to
increase demand forecast accuracy and hence increase the sales and operation planning accuracy.
In 2016, Walmart was testing a service to monitor pork in China. The service was transporting pork
products from Chinese farms to Chinese stores. The trials were complete in February 2017. Walmart
reported that the finished version of the service could be ready no later than a few years. Blockchain
played the major role in digital tracking of pork products. The tracking required a few minutes, while
using the older versions required many days to complete the tracking process. Details related to the
farm, production facility, batch number, temperature during storage and shipping can be viewed on
blockchain as a distributed ledger. These details helped in forecasting and hence enhanced the sales
and operation planning.
4. Resource Sharing
One of the main advantages of Blockchain technology is data transparency. This feature could help
the decision maker to know which digital assets in the supply chain are fully utilized. This assists in
planning for better utilization through sharing resources.
At the end, each one of these scenarios can be enhanced to achieve a better value if we merge it with
other technologies that would result as a disruptive solution to many supply chains.
5. Conclusion
Supply chain processes could be easily transformed to meet the Blockchain architecture.
Blockchain helps in providing valid and effective measurement of outcomes and performance
of major supply chain functions and processes. This is possible through data transparency and
efficient information flow. Blockchain is an emerging field, and the merge between Blockchain and
supply chain is promising. This is because Blockchain has been recognized as promising software
architecture in several domains other than supply chain. This paper proposed 3 scenarios to merge
Blockchain and supply chain in order to avoid some of the challenges faced by supply chains. The
scenarios are based on Data Transparency and Resource sharing. The paper concludes that the
proposed scenarios of merging Blockchain and supply chain technologies will enhance supply
chains performance.
References
Azaria, A., Ekblaw, A., Vieira, T., & Lippman, A. (2016, August). Medrec: Using blockchain for medical data access
and permission management. In Open and Big Data (OBD), International Conference on (pp. 25-30). IEEE.
Elgazzar, M. M., & Hemayed, E. E. (2016, December). Electrical load forecasting using Hijri causal events. In Power
Systems Conference (MEPCON), 2016 Eighteenth International Middle East (pp. 902-906). IEEE.
Eljazzar, M. M., & Hemayed, E. E. (2016, December). Feature selection and optimization of artificial neural network
for short term load forecasting. In Power Systems Conference (MEPCON), 2016 Eighteenth International
Middle East (pp. 827-831). IEEE.
Folinas, D., Manikas, I., & Manos, B. (2006). Traceability data management for food chains. British Food Journal,
108(8), 622-633.
Karafiloski, E., Mishev, A., (2017), Blockchain Solutions for Big Data Challenges, pp. 764 IEEE: Eurocon: OHRID,
R. Macedonia
Kshetri, N. (2018). 1 Blockchain’s roles in meeting key supply chain management objectives. International Journal of
Information Management, 39, 80-89.
Lummus, R. R., Krumwiede, D. W., & Vokurka, R. J. (2001). The relationship of logistics to supply chain management:
developing a common industry definition. Industrial Management & Data Systems, 101(8), 426-432.
Mattoli, V., Mazzolai, B., Mondini, A., Zampolli, S., & Dario, P. (2009). Flexible tag datalogger for food logistics.
Procedia Chemistry, 1(1), 1215-1218.
McConaghy, T., Marques, R., Müller, A., De Jonghe, D., McConaghy, T., McMullen, G.,... & Granzotto, A. (2016).
BigchainDB: a scalable blockchain database. white paper, BigChainDB.
Tjandra, R. A., & Tan, K. H. (2002). Strengthening of Reinforced Concrete Continuous Beams with External Tendons.
In Proceedings, Sixth International Conference on Structural Failure, Durability and Retrofitting, Singapore
(pp. 397-404).
Zyskind, G., & Nathan, O. (2015, May). Decentralizing privacy: Using blockchain to protect personal data. In Security
and Privacy Workshops (SPW), 2015 IEEE (pp. 180-184). IEEE.
1. Introduction
From a business perspective, technology and knowledge are fundamental assets for the growth and
sustainability of the organization, being these pillars on which market competitiveness, profitability
and differentiation are based.
At this point, the concept of technology transfer is seen as a mechanism increasingly used by
companies and industries that direct their actions towards the acquisition and generation of new
knowledge to increase their growth and improve their capabilities on the way to innovation. For this
purpose, they develop projects through which they disseminate, share and appropriate knowledge
and technologies from companies or universities for industrial application (Lewis, 2011; Conti and
Briceño, 2015; Chais, Ganzer and Munhoz, 2017), thus seeking to generate a positive impact on
IAMOT 2019 | 231
Managing Technology for Inclusive and Sustainable Growth
their technological capabilities, the training of their personnel and improvement in their production
processes and products offered to the market.
Understanding this dynamic of interdependence between world markets, through which there is a
flow of technology and know-how from where technological development is generated to where
it is required and applied, this article makes an approach to the conceptualization of technology
transfer, the application of the term at the business level, and a tour of the different models that
have approached the evaluation of the impact of these processes in the organizations that use them,
in order to determine their effectiveness. As a contribution, a methodological proposal for impact
evaluation is presented through a model that considers the disaggregation of dimensions and their
measurement through an indicator bank, applied to a case study in the Corporación de Ciencia y
Tecnología para el Desarrollo de la Industria Naval, Marítima y Fluvial - Cotecmar, innovative
organization that has stood out in the Colombian naval industry as a Technological Development
Center that, through the intensive use of knowledge and its University - Industry - Government
Model, represents an important business bet with high social, economic and technological impact in
the country (Tascon, Quintero, Saravia and Sejnaui, 2012).
Authors such as Martínez, Vargas and Salgado (2018), point out that the best way to shield relations
between organizations in this area is through a Technology Transfer Contract, which, being conceived
as a legal act with business content, is structured as a new figure that can be successfully coupled
to the dynamics of the markets and the knowledge society, so that they can access technological
capabilities that other organizations have.
The process of technology transfer can be represented in the following phases:
At each stage, there is a need and an action generated among the actors, in order to make the transfer
process efficient and obtain the benefits expected by each party. In this way, the process begins
with the identification of an opportunity or technology need in the organization. At this point
they identify the different technology providers that play the role of offerors and are in charge
of transferring their capabilities to the receiving company. The next step is negotiation, in which
the scope of the process, the type of technology to be transferred, the objectives to be achieved,
the rights and intellectual property of the technology transferred or developed in the process, the
resources to be used, among others must be established. After this phase the collaboration between
the parties is executed according to the established scope, and finally the technology is implanted in
the organization from where the need was generated. For Gonzales (2011) these are the stages that
constitute the ToT process itself, however after the implementation of technology in the company,
a later phase is required to analyze the effectiveness with which the process has been carried out
(positive or negative results), the quality of the contributions, the appropriation and integration of
technology in the company and in general the benefits generated.
Since its creation, the corporation has played a key role in the sector, being a national reference for
the development of design, construction and ship repair projects as well as distribution of science
and technology services, and has based its activity on a management system aimed at continuous and
permanent innovation as one of its main corporate values, so that it can be conceived as a process
and not as an accidental event.
Based on innovation, the corporation carries out research, technological development, engineering,
design and technology transfer projects, through which it seeks constant appropriation, generation
and exploitation of knowledge to increase its capabilities and market share. The technology transfer
projects implemented at Cotecmar are associated with three fundamental approaches. The first refers
to the processes in which the transfer is made from outside the Corporation and it is Cotecmar
who appropriates the knowledge and incorporate it into its production process: Outside - Inside.
Secondly, are the processes in which the transfer is internal, so both knowledge and technology flow
between the different management areas of the organization: Inside - Inside. The third approach
refers to the knowledge and technological developments that are generated within Cotecmar and
it is transferred abroad as a contribution to increasing national and sector competitiveness: Inside -
Outside, (Dominguez, 2012).
As a result of the management of this system, the Corporation has executed significant projects that
have contributed to increase the capacity and technological level. Given the nature of the company
and the type of technology transferred, which is the naval, maritime and river sector, some of these
projects have impacted not only the company but also the productive transformation in Colombia,
especially in the shipyard sector, and have contributed to achieving the technological independence
of the country, against the vessel design, construction and repair requirements of the National Navy
of Colombia who, up to few years ago, imported most of its naval fleet. Likewise, Cotecmar’s
technological growth has allowed it to compete in the market and offer its innovations to national
and international clients.
Some of the transfer projects are shown in Figure 2:
These projects have been executed as Cooperation Agreements, Technology Transfer Contracts,
On the Job Training (OJT), Technology Licensing, OFFSETS (Industrial and Social Cooperation
Agreements), Spin Offs Creations, among others.
The corporation’s experience in this type of process has allowed it to go through a technological change
from being a Technology Receiver a few years ago, to Codeveloper and offeror of Technology, through
the adoption of best practices of leading companies worldwide and develop projects in cooperation
with them. The new capabilities acquired in ToT processes have served as a basis for the development
of countless projects, because the transfer of knowledge added to the experience of the personnel, has
driven the improvement of strengths that have led the company to be recognized as a benchmark for
innovation in the shipbuilding sector at the national and Latin American levels.
Analyzes technology transfer activities, with special emphasis on those of commercial importance. That
Market
is to say, those in which the market can give some expressly quantifiable signals. This model emphasizes
Impact Model
microeconomic analysis of the enterprise and/or productive sector.
It is a model that registers the socio-economic and environmental repercussions of the projects and services
Economic
related to this activity. It works with large aggregates, mainly in macroeconomic analysis. Some of the
Impact Model
parameters that need to be quantified are the contribution to sustainable socio-economic development.
Another approach was made by Bozeman (2000), which establishes, through effectiveness criteria,
the ToT evaluation. To these criteria the author formulate questions that allow the evaluation to be
carried out under a theoretical foundation.
Table 2: Technology Transfer Effectiveness Criteria
Effectiveness
Base Question Theoretical Foundation
Criterion
Direct impact
Was the technology transferred? Classical theory of the organization
on the processes
Impact on the Did the technology transferred impact the sales of Microeconomic theory of the
market the Company? company
Economic Did the technology transfer lead to regional
Regional science and public finance
development economic development?
Did the technological agent or the recipient
Political politically benefit from participating in the Theory of political exchange
technology transfer?
What was the impact of technology transfer on the Economic policies, cost – benefit
Opportunity cost
alternative use of resources? analysis
Scientific and Did technology transfer generate new capabilities to
Theory of social capital
technical capital develop and use research?
This author highlights that unlike the previous ones, more dimensions are included to evaluate, such as the
impact on business processes, the political impact and the opportunity cost related to the resources used.
The evaluation made by the Italian National Committee for Research Evaluation (CIVR) between 2001
and 2003, was to develop an indicator for the measurement of research and transfer activities of universities
and research centers in Italy. Based on this indicator, researchers from the University of Calabria (2015),
developed a measurement model for the universities of the province in which the effectiveness of the
activities is considered, in terms of the results obtained, considering variables such as patenting, income
from the sale and licensing of the patent, Spin-Offs, the number of university associations and their
estimated value, in order to finally weight these elements according to their relevance. The results are
compared with the innovative growth from companies directly and indirectly associated with universities
because of their close geographical location, which leads to the conclusion that ToT’s activities play a
significant role in the probability of innovation of Italian manufacturing companies.
Where PATu refers to the number of patents registered by the University, PATactu is the number
of active university patents in the evaluated period. REVu is the revenue from the sale of patents
and licenses, SPINu indicates the number of active spin-offs and PARTu is the number of active
associations (worth more than 500,000 Euros). This measurement is compared with the probability
of introducing at least one innovation in the company, whose measurement model is empirical for
the study.
Another type of evaluation using indicators was provided by Autio and Luamanen (1995), those are
shown in Table 2:
Table 3: Indicators for Measuring Technology Transfer Activities
Category Indicator
Capacity inputs
Input Indicators Technology inputs
Monetary and physical resources
Research results and technology
Output indicators Commercial outputs
Monetary and resource results
New development links
Process indicators Capacity Transfer and Capacity Utilization
New development units
Indicators, as well as evaluation models, are based on theoretical assumptions that determine: what
is meant by evaluation, what is intended to be achieved or what needs are intended to be covered,
how to proceed to cover needs, in such a way that when responding to them the evaluator makes a
choice in his theoretical, pragmatic and methodological position (Colás and Rebollo, 1993), which
is of vital importance in an evaluation process.
Given the heterogeneity of the methods and models used to measure the impact of technology
transfer processes, for this article we propose the design of a joint model that through the
disaggregation of dimensions based on the Logical Framework Methodology, evaluates the
performance of a technology transfer process and its impact on the organization, considering
a large number of variables that determine and classify a project as technology transfer. It
is proposed for it a structure that starts from categories, which group the characteristics in
common of a group of factors that are the relevant points of interest to analyze in the ToT and
at the same time, they are composed by the specific criteria under which the variables will be
measured. These last ones will be quantifiable by means of the use of a bank of indicators able
to define operationally the results to reach.
Figure 4: Process for the Application of the Impact Assessment Model in ToT
The model is developed during the PROCESS stage; however, the initial activity proposed establishes
the minimum requirements for the categorization of a technology transfer project, in order to provide
filters, given the heterogeneity of projects and the different characteristics that surround them,
thus delimiting the possibility of their inclusion in the exercise, projects that, although based on
knowledge, learning and even the increase in capacities, are not really technology transfer projects.
In addition, the list of requirements guarantees the minimum information that must be available
to measure the impact. In order to support these requirements, a bibliographical and contribution
of authors research was rendered which included Castellanos, Zuleta, Medina and Negrin, Gibson
and Mahdjoub, Stock and Tatikonda, the guidelines of the Transfer Institute’s knowledge and
technology transfer manual, and a diagnosis of the state of ToT projects in the company of the case
study, COTECMAR.
Table 4: Minimum Requirements for a ToT Project
Minimum Requirements To Consider A Technology Transfer Project Complies Does Not Comply
Minimum Requirements To Consider A Technology Transfer Project Complies Does Not Comply
Industry or sector benefits are identified and generated from the project
Number of
Level of Compliance requirements met /
Total requirements
After analyzing the fulfillment of the requirements, the four approaches proposed by Stufflebeam (in
Vara, 2007) to carry out an evaluation process are proposed:
4.1. Context
The project is situated according to the characteristics that initially gave rise to the transfer. The
capacities that the company has that will be affected in the processes are identified; the incorporation
of the knowledge and practices to be transferred depends greatly on these capacities. It also establishes
the existing technological need and the supplier that can satisfy it. This results in the declaration of
the goal and objectives that the company has, to develop a project that drives the acquisition of
knowledge that will improve their processes, increase their sales or drive a new product or service
to market.
4.2. Inputs
In this phase, the process consider the resources that have been used for the transfer, in order to
keep in mind the investment and capacity used for the success of the project and to be able to
evaluate its evolution and result in the final phase. It considers the human, financial, technological,
and other resources used. The own data of the process affected in the transfer, for example, level of
productivity, man-hours employed, quantity of products obtained per unit of time, among others,
besides the report generated by the participants in the transfer, in which the knowledge acquired
during the activity is evidenced.
4.3. Process
The process, in this case, refers to the application of the evaluation model, that is to say the phase
in which the resources used are related, in the context of the project, making use of the tools that
have been designed to carry out the evaluation. In this case, the process is carried out through the
operationalization of the variables, which can be of: Result (those that demonstrate the effectiveness
in the performance of the ToT) and of Impact (those that demonstrate the effects of having carried
out the ToT, in comparison with not having done so). After the variables have been declared, the
evaluation is made with the synthesis of variables in matrices and a bank of indicators.
4.4. Product
This consider the outputs of the process. In the case of outcome variables, the output is the
establishment of the gap between the objectives initially planned for the transfer, the effect on the
processes and the objectives achieved. In the case of impact variables, the product is to identify the
state of the company before and after the ToT process. Finally, the impact is analyzed in order to
adopt a positive or negative position according to the effect that the project has brought, based on the
chosen variables; this analysis should serve as a basis for making decisions, regarding the realization
of similar projects, and the lessons learned from it.
The dimensions that make up the model are presented below:
In order to evaluate the impact of technology transfer projects, the Logical Framework Methodology
serves as a basis to illustrate in a simple way how disaggregation provides a greater number of
phases to be considered when analyzing a project, in order to arrive at an orderly and structured
measurement of the aspects to be evaluated.
In this sense, the model is approached from two perspectives, according to the performance of
the transfer and according to the impact caused. From these two approaches, the components to
be validated in each of them are disaggregated to arrive at measurable considerations that allow
evidencing a result. The existing complementarity between the evaluation of the transfer performance
and the impact caused is highlighted, since from the data obtained in the performance the changes
and gaps that can be measured to determine the impact are seen.
5. Performance Evaluation
The performance of the transfer is measured through result variables, these are the ones in charge
of declaring the level of fulfillment of the objectives, the number of activities associated to the
transferred knowledge, the absorption of the same in the company and, in general, evidence the
efficiency of the process. These variables are evaluated through a performance evaluation matrix
(PEM) that contemplates Categories, Factors and Criteria.
CATEGORY 1: Social appropriation of knowledge:
It refers to the knowledge-individual interaction, which has been generated from the transfer. This
category measures the level at which the stated goals have been met and how the knowledge received
has been absorbed by the largest number of people in an organization.
FACTOR 1.1: Achievement of goals
CRITERION 1.1.1: Level of achievement of objectives
Relationship between what was planned and what was executed.
CRITERION 1.1.2: Transfer Effectiveness
List of the topics or technologies received in the ToT with respect to those planned or stipulated in
the contract.
CRITERION 1.1.3: Identification of transfer defaults
Aspects for improvement, lessons learned from the process.
FACTOR 1.2: Actors
CRITERION 1.2.1: Use of human resources
Associates the retention in the company of the personnel that participated in the ToT.
CRITERION 1.2.2: People training
Analyzes the trainings or teachings that the personnel dictated to the rest of the employees based on
what they learned.
FACTOR 1.3: Knowledge
CRITERION 1.3.1: Absorption of knowledge
Analyzes if the knowledge or technology received was evaluated and approved satisfactorily.
CRITERION 1.3.2: Socialization of knowledge
Dissemination of the process and knowledge by stakeholders in the company. (Stakeholders are all
areas directly or indirectly influenced by the ToT).
CATEGORY 2: Technical aspects
This category focuses on the operational level results of the technology or knowledge transferred,
measuring the level of functionality that the project has had in aspects such as the introduction of
improvements in processes, level of knowledge management for its transformation and adaptation,
impacted production processes, etc.
FACTOR 2.1: Technological Appropriation
CRITERION 2.1.1: Access to technology
Analyzes the extent to which the technologies or knowledge transferred were implemented in the
company.
CRITERION 2.1.2: Technological domain
Relates the capacity to appropriate the technology in such a way that changes in the company’s
processes are generated from it.
CRITERION 2.1.3: Quality of training
Evaluates the level of conformity in the receiver with what is transferred.
FACTOR 2.2: Productive Capabilities
CRITERION 2.2.1: Development of new processes
Number of new processes in the productive structure of the company after the ToT.
CRITERION 2.2.2: Improvement of products quality
IAMOT 2019 | 242
Conceptualization of Technology Transfer and its Impact Evaluation: Case Cotecmar
Associates the use of the ToT with the customer’s perception of improvements in the company’s products.
CRITERION 2.2.3: Optimization of production times
Relates the change in the times in which the production of goods and services is carried out, after
introducing improvements by the process of transference, within the company.
CATEGORY 3: Science, Technology and Innovation
This category measures the results of the project at the level of scientific production. It focuses on
performance through obtaining new scientific or technological knowledge and networks created
from the project.
FACTOR 3.1: Scientific Dissemination
CRITERION 3.1.1: Knowledge Generation
Identification of the scientific production that occurred in relation to the transfer. Measures the
number of articles, papers, theses, prototypes, etc.
CRITERION 3.1.2: Creation of Entrepreneurship
Analyzes if new companies or intra-enterprises were created from the ToT; understanding the latter
as new proposals to generate added value or new business models.
CRITERION 3.1.3: Creation of Alliances
Relates the new cooperation networks with universities, companies or research institutes that may
have emerged after the ToT process.
FACTOR 3.2: Intellectual property
CRITERION 3.2.1: Intangible assets generated
Creation of intangible assets for the company after the transfer. New designs, patents, trademarks,
software, know how, customer lists, etc. are considered.
CATEGORY 4: Economic Aspects
The focus of this category is to measure, in economic issues, the changes that may occur in some
variables, given the implementation of the project.
FACTOR 4.1: Economic
CRITERION 4.1.1: Decrease in production costs
Analyzes the efficiency in the productive processes at cost level.
CRITERION 4.1.2: New production.
Identifies the new products or services that have been created in the company from the knowledge
acquired in the transfer.
CRITERION 4.1.3: Value chain development
Identifies whether the transfer has had an impact on the company’s value chain, for example by
demonstrating variation in the acquisition of materials or services from abroad, as opposed to
domestic purchasing or domestic production in the company.
6. Impact Evaluation
Impact is evaluated by a number of variables that consider the evolution of the organization or of the
affected processes after the execution of transfer, it means the effects, whether positive or negative, that
the project brought. In this case the variables are measured through the impact evaluation matrix (IEM).
CATEGORY 1: Technical Impact
This category is measured based on variables that indicate change in technological and production
levels. In other words, it compares the operational performance after the project.
IAMOT 2019 | 243
Managing Technology for Inclusive and Sustainable Growth
Identifies those advantages that the company has developed over the competition, which are
attributed to the transfer process in which it participated.
CRITERION 4.2.2: New customers.
Evaluates whether new customers have been acquired by the new processes or products launched
after participation in the ToT.
In order to choose the pilot project to which the evaluation will be applied, the model
consider the projects executed in Cotecmar and stablish a minimum of characteristics that
they must comply with; according to the level of compliance, the Coastal Patrol Vessel
CPV - STX project is chosen, which is representative for the company in its transfer and
capacity increase activities.
Outcome Variables
Categories Factors Criteria Indicator Measurement Performance
# Of objectives
Level of 1/1=100% Execute
achieved /
achievement of ToT project with High
# of objectives
objectives STX
proposed
# of ToT activities
3/3= 100%
Transfer received / # of
Development of 3 High
Achivement of Effectiveness planned ToT
OJT programs
Goals activities
1) Change of
Themes
Identification
2) Copyright issues
of faults in the # of lessons learned Medium
3) Few people
transfer
from different
areas.
Staff active in
Social the company
appropriation of Use of human participating in
8/12=67% High
knowledge resources the ToT / staff
participating in the
Actors
ToT
# of training
programs (courses)
People training 1/3=33% Low
from transfer /# of
transfers received
# Of evaluations
Absorption of approved / No evaluations
N/A
knowledge # Of evaluations conducted
carried out
# of socialization
Knowledge
activities,
Socialization of dissemination and
1 Forum Low
knowledge documentation
of knowledge
transferred
# of tools or
technologies
(machinery and
Access to No Technology
equipment) N/A
technology Transfer
implemented / #
of technologies
Technological transferred
Appropriation # of improvements
Technological implemented to
1/3= 33% Low
domain the processes / # of
transfers received
Technical
Qualification of the
Aspect Quality of
quality of the training 90% High
training
received
# of new processes
Development of
introduced after the 1 Low
new processes
ToT
Difference in number
Productive Improvement of Prototype: 1st CPV
of complaints N/A
Capacities products quality vessel
received pre and post
Construction times
Optimization of 8 months /12
compared to the High
production times months =67
technological emitter
# STI products
Knowledge obtained according
11 High
Generation to the Colciencias
classification
# of spin offs
Creation of created or intra-
0 Low
Scientific Entrepreneurship entrepreneurship
Science, Dissemination modalities
Technology Attendance at
and Innovation # of new scientific 1 congress and
(STI) Creation of cooperation networks 2 workshops,
High
Alliances in which you of which no
participate participation was
expected.
# of intangible assets
Intellectual Intangible assets generated after the 13 design concepts
High
Property generated ToT / from a CPV 46
# of expected assets
Decrease in decrease in Prototype: 1st
N/A
production costs production cost Vessel
Satisfactory
construction as
Relationship new
planned of 1 vessel
Economic New Production products or services High
Economic (CPV ARC Punta
Aspect from the ToT
Espada) from
design
31.089.140.427
Value chain Variation in imports -56.731.078.027 =
Medium
development (2017-2013) - 25.641.937.600
(45%)
Table 6: IEM - Impact Evaluation Matrix CPV Project - STX
Impact Variables
Impact Variables
4. Conclusions
The operationalization of the variables was done through the collection of project data, through the
reports generated from the transfer, interviews with the participants, management reports and Expost
evaluation matrix.
In order to bring the results of the evaluation model to quantifiable data, the performance ranges
were established: Low with a score of 1, Medium with a score of 3 and High with a score of 5.
Likewise, a positive impact with a value of 5, a neutral impact would take the value of 3 and a
negative impact the value of 1.
Thus, for the performance evaluation matrix the total of variables rated is:
Table 7: Results
Low 5 5
Medium 2 6
High 9 45
TOTAL 56
In other words, of the total results with the best performance that could have been achieved (16
variables with a high score = 80), the project reached a total of 56, therefore it met at least 70% of
the optimum score, which is considered an important effect in favor, shown by variables such as
full compliance with the objectives of the transfer, the development of training plans, the use of
active human resources in the company, optimization of production costs associated with the ship
design and construction processes, scientific products obtained and the intangibles generated by the
acquired knowledge.
The remaining 30% that did not achieve optimum performance has been identified according to the
number of socializations or trainings within the company after the transfer, which did not allow the
knowledge to be disseminated in the interested areas and to be able to show substantial changes in
the organization’s procedures. In this way, the knowledge remained in the participants, who although
managed to adopt better practices, did not consolidate changes at the level of internal processes.
For the impact assessment matrix, the following variables were scored:
Table 8: Results
In other words, out of a total of 10 variables with a score of 5 =50, an impact of 46 points was
achieved, i.e. 92% of the target. This percentage is clearly represented in variables such as the
Technological Level of the corporation which increased in the years of study by 27.5%, a more than
double increase in the capitalization of the intangible assets generated, a positive result in the return
on investment and the income received from the production of a vessel from the process, thanks to
the capacity acquired in the transfer.
It is worth highlighting an important indicator shown by the model, relates the cost-benefit of the
manufacture of an intangible compared to the manufacture of a tangible asset after the ToT. In this
case the economic benefit acquired by Cotecmar by manufacturing an (intangible) design of the
vessel and selling it to the Korean company STX, was 153% in relation to its manufacturing cost,
whereas selling the vessel that was manufactured (tangible) in the company resulted in a profit of
12%. This demonstrates the importance and positive effects of investing in knowledge, and the
profitability that can be produced in a company by basing its business model on the exploitation and
commercialization of intangibles, whose return usually lasts over time based on an initial investment.
Finally, the exercise allowed the qualification of different factors considered as critical in a ToT
process, and which, when measured, showed positive results that support the importance that this
project had for the corporation, especially at the technological level due to the acquired capacities,
economic level due to the return on investment and scientific level due to the intellectual production
experienced in it. And although there were variables whose performance was low, when unifying
the results, on average the impact of the project was positive for the company and this has been
demonstrated in the advances in design and construction of ships that increase the competitiveness
of the shipyard.
References
Abdala, E. (2004). Manual for impact evaluation in training programs for young people. CINTERFOR. Uruguay.
Abramson, N. et al. (1997). Technology transfer systems in the United States and Germany. Fraunhofer Institute for
Systems and Innovation Research. Germany.
Spanish Association for Standardization and Certification. (2006). UNE 166000, R&D&I management: terminology and
definition of R&D&I activities. Spain.
Autio, E., y Laamanen, T. (1995). Measurement and evaluation of technology transfer: review of technology transfer
mechanisms and indicators. Int. J. Technology Management, Vol. 10 (7/8).
Inter-American Development Bank. (2011). Short-term Impact Assessment of SENACYT on the Innovation of
Panamanian Companies.
Bello, R. (2009). Course/Workshop Impact Evaluation. Economic Commission for Latin America and the Caribbean,
CEPAL. Chile.
Bozeman, B. (2000). Technology transfer and public policy: a review of research and theory. School of Public Policy.
Georgia Tech, United States.
Cardamone P.; Pupo V. y Ricotta F. (2015). University Technology Transfer and Manufacturing Innovation: The Case
of Italy. Review of Policy Research. Vol. 32. DOI: 10.1111/ropr.12125
Castellanos, O. (2007). Technological Management: From a traditional approach to intelligence. National University of
Colombia. Colombia.
Chais, C.; Ganzer, P. y Munhoz, P. (2017). Technology transfer between universities and companies: two cases of
Brazilian universities. Administration and Innovation Journal. http://dx.doi.org/10.1016/j.rai.2017.07.003.
Colás, B. M. y Rebollo, C. M. (1993). Program evaluation: A practical guide. Spain: Kronos Editorial.
Conti, G. P., y Briceño, F. A (2015). Technology transfer. Aspects of forward to control the assets of technology
companies in oil sector. Prospect, Vol. 13 (2).
COTEC (2003). New technology transfer mechanisms. Weaknesses and opportunities of the Spanish system of
technology transfer, Spain.
Dominguez, K. (2012). Development of a technology transfer model for technology-based companies. Case study:
Science and Technology Corporation for the Development of the Naval, Maritime and Fluvial Industries -
Cotecmar. (Master Thesis) Technological University of Bolívar, Master’s Degree in Innovation Management.
Echarri, A. y Pendás, A. (1999). The transfer of technology. Practical and legal application, Confemetal Foundation,
Spain.
Franks, L. M y O’Brien, T. C. (1981). Evaluation framework for federal technology transfer initiatives. Journal of
Technology Transfer Vol 6(1).
Gibson, D. y Mahdjoubi, D. (2010). Different aspects of technology transfer. Galician Journal of Economics, Vol 19.
Gonzales, J. (2011). Manual of technology and knowledge transfer. The Transfer Institute. Spain.
Hidalgo, A.; León, G. y Pavón, J. (2002). The management of innovation and technology in organizations. Spain: Ed.
Pirámide
Ingallinella, A. M., Picco, A., Sabesinsk, M., Seselovsky, R. E, y Zossi, A. (1999). Evaluation of extension activities
and technology transfer in universities. National Commission for University Evaluation and Accreditation
CONEAU. Argentina.
Colombian Institute of Technical Standards and Certification ICONTEC, (2008). NTC 5800: Management of research,
development and innovation (R&D&i). Terminology and definitions of R&D&i activities. Colombia.
Lewis, J. (2011). Technology Transfer in the Wind Power Industry: Experiences from China, India and South Korea.
International Journal of Technology and Globalisation. Vol. 5 (3).
Martínez, B., Vargas, I. y Salgado, E. (2018). The technology transfer contract: characterization and strategic importance.
Brazilian Journal e of Direito Vol. 14 (2).
Martinez, J. M. (1986). The technological domain: key to the development, concepts and technical, social and political
implications. Espacios. Vol. 7 (1).
Muñoz, A. (2007) Quantitative and qualitative methods in the evaluation of impacts on social investment projects.
(Doctoral thesis). Recovered from http://www.eumed.net/tesis/2007/ams/
ONU (1984). Basic guidelines for the design and use of monitoring and evaluation systems for rural development
projects and programs in developing countries. Working Group on Rural Development of the CAC. Italy.
Ortegón, E.; Pacheco, J. F. y Prieto, A. (2005). Methodology of the logical framework for the planning, monitoring and
evaluation of projects and programs. Economic Commission for Latin America and the Caribbean CAPAL
- United Nations.
Penrose, E. (1995). The theory of the growth of the firm. England: Oxford University Press. ISBN: 9780198289777.
Quintero, J.; Ortega, M.; Sejnaui, A. y Castilla, I. (2011). Implementation of Technological Transfer Mechanisms as
a Consolidation Strategy for the shipbuilding Industry in Colombia. Case Study: Offshore Patrol Vessel
Project - OPV. Science and Technology Corporation for the Development of the Naval, Maritime and Fluvial
Industries, COTECMAR. Colombia.
Rios, H. y Marroquín, J. (2012). Technological innovation as a mechanism to improve economic growth. Accounting
and Administration Vol. 58 (3).
Saravia, J., Ovallos, D. y Quintero, J. D. (2016). Impact of Competitive Intelligence in Knowledge-Based Organizations.
A Proposed Methodology for Measuring. International Journal of Control Theory and Applications. Vol. 9
(44).
Stock, G. y Tatikonda, M. (2000). A typology of project-level technology transfer processes. Journal of Operations
Management Vol. 18.
Tascón, O., Quintero J. D., Saravia, J. y Sejnaui, A. (2012). The Management of Innovation in Cotecmar and its impact
on the technological development of the Colombian naval industry. Armed Forces Vol. LXXXV (224).
Turriago, H. (2002). Technological Innovation Management. Spain: Alpha Omega.
Vara, A. (2007). The impact evaluation of social programs. Theoretical and methodological foundations and application
to the Peruvian case. Editorial Fund of the University Of San Martín De Porres. Peru.
Zuleta, J. C.; Medina, A. y Negrin, E. (2015). The integration of knowledge in the university technological transference:
model and procedures. Industrial Engineer No 3.
Sanjay Bhardwaj
International Advanced Research Centre for Powder Metallurgy
and New Metallurgy (ARCI), Hyderabad, India
E-mail: sanjay@arci.res.in
S. Subbarao
CSIR - National Metallurgical Laboratory Madras Centre,
Chennai, India
E-mail: sripadas@gmail.com
Gadhe Padmanabham
International Advanced Research Centre for Powder Metallurgy
and New Metallurgy (ARCI), Hyderabad, India
E-mail: gp@arci.res.in
Karuna Jain
National Institute of Industrial Engineering (NITIE),
Mumbai, India
E-mail: nitie.director@gmail.com
Abstract
Conversion of research results to transferable and commercialisable technologies is desirable by all stakeholders.
This translational process, however, is fraught with several challenges. Authors have conducted a thorough survey
to identify the relevant literature on the models addressing the process leading to technology commercialisation.
It was observed that existing models don’t address the idiosyncrasies associated with the process leading to
commercialisation of materials technologies, application and market development strategy for a research lab
developing technologies for eventual transfer to industry, as well as ecosystem of a developing nation like India.
A Conceptual Theoretical Model (CTM) shall be developed based on the analysis of existing literature. This model
shall be used to probe the findings of a case in which Column flotation technology - a materials technology - was
transferred to industry by CSIR- National Metallurgical
Laboratory, a government funded research organization. Unique insights from the case study shall be used to
identify the needed modification in the CTM. Contributions of this paper shall pave the way for proposing a model
that is appropriate for a research and technology organization undertaking materials technology development for
technology transfer in the Indian ecosystem.
Findings and analysis of this paper shall be relevant to formulate technology transfer and partnership strategy.
Keywords: Technology Transfer, Technology Commercialisation, Materials Technology, Application Development,
Technological Partnerships
1. Introduction
Technology plays a crucial role in increasing the competitiveness of most contemporary organisations
provided the entire value chain, starting from the conception of an idea to the commercialisation of
the “new” technology-based process or product, is managed effectively and efficiently. Intellectual
Property Value Chain (IPVC) entails activities of generating an idea; development, demonstration
Ideation, development, prototype Model does not discuss (i) about the manner in which
Rothweld and Zegweld
production, manufacturing, output from a phase is assessed, and (ii) the strategy
(1985)
commercialisation, market to be adopted for mobilising resources for next phase
Table 3: Miscellaneous
None of the above models considers unique features associated with development, demonstration,
transfer and commercialisation of the advanced materials technologies; Indian ecosystem relevant
to science & technology-based businesses; IP management and feedback mechanism. CTM derived
from above analysis comprises six sub-processes (i.e. idea generation, idea screening, pre-incubation,
incubation, pre-demonstration, and demonstration).
2. Research Methodology
Single-case design (Yin, 1984) is used to test the applicability of sub-processes of the CTM, in a
situation in which an RTO is involved in development, demonstration and transfer of an AMT in
the Indian context. Sub-processes identified in the CTM have been used to probe a real-life case
involving an Indian RTO, for instance: Column Floatation (CF) technology in this paper. To gather
data, detailed interview was conducted by the first author of this paper with the scientists from
Council of Scientific and Industrial Research - National Metallurgical Laboratory (CSIR - NML)
involved in the CF technology development and transfer. Since scientists associated with the CF
technology are also co-authors of this paper, they have incorporated additional information that
could not be collected through interviews. Although two of the authors of this paper have been
associated with the CF technology development and transfer, caution is adopted to be a neutral
observer while gathering evidence about sub-processes leading to technology commercialization.
Points of difference /other interesting insights, while comparing sub-processes of the CTM with the
sub-processes of the real-life case, shall be highlighted and these findings shall be used to attain an
improved understanding of the AMTs’ commercialisation process. Learning gained by the analysis
should guide in taking thoughtful decisions by stakeholders at different stages leading to technology
commercialisation. And these insights may be gainfully utilized by the organisations contemplating
to introduce similar technologies in the marketplace.
After successful prototyping / pilot scale demonstration followed by commercial scale launch of the
CF technology, CSIR-NML signed a Memorandum of Understanding in the year 2008 with McNally
Bharat Engineering Co. Ltd. (Now, rechristened as McNally Sayaji Engineering Limited), a leading
mineral processing equipment manufacturer and marketing organization to provide engineering
support and to market CSIR-NML’s CF technology. Such partnerships facilitate utilization of
diverse expertise available within multiple organizations (Bhardwaj et.al, 2015a). In the initial
stage of commercialisation effort, 3 organizations had procured laboratory scale, pilot scale and
commercial scale flotation columns. Commercial column of 2500 mm diameter was supplied by the
technology receiver.
Training was provided to the technology receiver’s staff on conducting the feasibility study
by demonstrating the usage of flotation columns, and for designing, fabrication, erection and
commissioning of flotation columns (Mcnally,2009). Strategic alliances aimed at utilizing
complementary strengths of different organizations have also been discussed by Timothy
and Dibrell (2001). Access, rather than acquisition, to the capability of partners enhances
the competitive strength of the partner accessing the capability of the other partner (Moweri
et al., 1996).
An interesting aspect of CF technology is that the dimensions (here, height and diameter of the
flotation column to be supplied to the users) were not fixed in all cases and they were to be
established for each case based on process data generated from laboratory scale investigations /
pilot scale studies. Newer applications of initial system or its variants were continuously being
developed to tap new customer segments and to provide better solutions to existing customer
segments (Bhardwaj et.al, 2016). For example, following columns have been supplied to variety
of users in the recent past:
●● laboratory scale flotation column by McNally Sayaji Engineering Limited:
●● Indian Institute of Technology (IIT), Hyderabad
●● Demonstration of technology at plant site using 74 mm lab scale flotation column by
CSIR-NML:
●● For two private sector companies for reduction of silica in marble fines, and for reduction
of silica in slimes of limestone washing plant by conventional and column flotation
●● Demonstration of technology at plant site using 500 mm pilot scale flotation column by
CSIR-NML:
●● For two private sector companies in upgrading the quality of sillimanite to >95% with
>75% recovery and for fine coal flotation
●● Supply of commercial scale flotation column by McNally Sayaji Engineering Limited:
●● supply and installation of industrial scale flotation column at four user companies
(two of 2500 mm diameter, one of 1500 mm diameter and one of 1000 mm diameter)
The development and commercialisation of CF technology for beneficiation of low-grade mineral
deposits received the CSIR Technology Award 2014 for most significant CSIR technology of the
five-year plan period.
(1) Ideation (1987) (2) Idea Screening (1987) (3) Lab Development (1988)
-Possible advantages of column Ministry of Mines (Government Laboratory scale studies lead to
flotation compared to other of India) decision to support the development of 3 types of
alternatives for separation of CSIR-NML for exploratory cells: conventional column,
minerals studies on fine particle electro-column and
processing combination
-Proposal formulated by CSIR-
NML after review of available
literature
(6) Field tests continues (1996- (5) Support for Upscaling (1996) (4) Prototyping (1992 - 1996)
2005)
- Demonstration of 6 pilot scale (500 CSIR-NML provided resources - After testing of 4 prototypes till
mm diameter) columns completed for preparing pilot scale (500 1996, CSIR-NML started fabricating
till the year 2005. Demonstration mm diameter) flotation columns pilot scale columns.
continued even after the year 2005 with automatic controls
either to boost the confidence of - Though prototype columns were
industry in some cases or in other still supplied after 1996 also for
cases, users found pilot scale sensitizing new markets and for
specific users needing columns for R
columns sufficient for their needs
and D studies or for teaching etc.
(7) Technology Transfer (2006 - (8) Support to tech receiver for (9) Continued technological
08) initial production (2008-12) support (2012-ongoing)
-3 commercial scale (more than -3 columns (1 prototype scale, 1 CSIR-NML’s R and D on column
1200 mm diameter) designed, pilot scale and 1 commercial floatation was ongoing to
fabricated and supplied by CSIR- scale) were supplied to end- further improve the
NML to end-users users till the time of data technological aspects
collection.
-Agreement signed with TRC in
2008 for commercialisation -Training to TRC’s staff
4. Conclusion
Unique aspect of CF technology commercialization process has been the parallel occurrence
of lab scale development, upscaling, field tests and commercialisation. While laboratory scale
flotation columns (74 mm diameter with a feed rate of 15-20 Kg/hr) were used for research
investigations and to sensitize prospective end-users about technical merits of the column, pilot
level facility (500 mm diameter with a feed rate of 0.75 -1.50 tonne/hr) was used for on-site
demonstration to boost confidence of the possible end users and for generating parameters to
prepare commercial scale columns. Therefore, laboratory and pilot level columns were used
along with the commercial scale columns (1000 – 2500 mm diameter with a feed rate of 5 to 10
tonnes/hr) to generate newer markets.
Technology receiver was identified mainly due to its understanding/familiarity with the target
markets of flotation columns due to its pre-existing business interactions with the similar customers.
Moreover, it was possible for the technology receiver to leverage its existing sales and distribution
infrastructure to explore the possible markets of flotation columns. Therefore, support requirements
from technology providers is relatively less in such situations.
References
Andrew, J. P. and Sirkin, H. L., (2006), Payback: reaping the rewards of innovation. Boston, USA : Harvard Business
School Publishing.
Bhardwaj, S., Jain, K. and Joshi, S.V., (2013), Technology commercialization by micro,
small and medium enterprises (MSMEs) in indian context: challenges and
governmental support systems. Indian Journal of Economics and Business,12 (1), 57-71.
Bhardwaj, S., Padmanabham, G., Jain, K., Johnson, R. and Rao, V.V.S., (2016), Towards developing a roadmap for
commercialising R & D for the advanced materials sector in the Indian context. In Proc. 3rd Int. Conf. on
Management of Intellectual Property Rights and Strategy (MIPS) 2016, IP for Development: The Emerging
Paradigm, pp.165-179. New Delhi: Excel India Publishers.
Bhardwaj, S., Padmanabham,G., Jain, K. and Joshi, S.V., (2015a), Innovation paradigms: contractual models for research
and technology organisations. International Journal of Technology Transfer and Commercialization, 13
(3/4),133–153.
Bhardwaj, S., Padmanabham, G., Jain, K., Momaya, K.S. and Joshi, S.V., (2015b), Strategic alliances for advanced
materials’ intellectual property value chain: research and technology organisation’s perspective. International
Journal of Intellectual Property Management, 8 (3/4), pp.207–226.
Boehm, B. W., (1988), A Spiral model of software development and enhancement. IEEE Computer, 21 (5), 61-72.
Chung, Q. B., Luo, W. and Wagner, W. P., (2006), Strategic alliances of small firms in knowledge industries. Business
Process Management Journal, 12 (2), 206-233.
Cooper, R. G., (2008) ‘What is the stage-gate® process?’, www.stage-gate.com/knowledge.
php, [29 November 2008].
Cooper, R. G., (2007), Managing technology development projects. IEEE Engineering Management Review, 35(1),
67-76.
De Saram, J. A. J. T., (2001), Technology Transfer in Sri Lanka: Successes and Failures in Research Organizations. Asia
Pacific Tech Monitor, 18 (4), pp.33-38.
Excell Partners, Inc., (2007), Company Start-up Stages [online] http://www.excellny.com/uploads///File/Start-Up%20
Stages-091506S.pdf [25 May 2012].
Goldsmith, H. R., (1999), Developing a Technology Business [online]. http://asbtdc.org/DocumentMaster.
aspx?doc=1032 [4 May 2012].
Goyal, J. and Menke M., (2006) Commercializing New Technology Profitably and Quickly, http://www.oracle.com/us/
industries/high-tech/022564.pdf [10 June 2012].
http://nmlindia.org/download/tech/CFT [17 October 2012].
http://www.nmlindia.org/technology/columnflotationtechnology.pdf [14 November 2018]
Jolly, V. K., (1997), Commercializing New Technologies. Boston, USA: Harvard Business School Press.
Kathleen, R. A., (2002), Bringing New Technology to Market. New Delhi, India: Prentice Hall of India Private Limited.
Kotelnikov, V., (2002), R&D Commercialization. http://it4b.icsti.su/1000ventures_e/presentations/tech_
commercialization.html [10 June 2012].
McCoy, A. P., Thabet, W. and Badinelli, R., (2008), Towards establishing a domain specific
commercialization model for innovation in residential construction, Construction Innovation: Information, Process,
Management, 8 (2),137 – 155.
Meyer, R. H., (2012), A Review and analysis of a selection of India’s innovation, entrepreneurship, knowledge
management and technology policy literature. Journal of Intellectual Property Rights,17(5),390 – 399.
Mitchell, W., and Singh, K., (1996), Survival of businesses using collaborative relationships to commercialize complex
goods. Strategic Management Journal, 17(3),169-195.
Narayanan, V. K., (2001), Managing Technology and Innovation for Competitive Advantage. London, UK: Pearson
Education, Inc.
Moweri, D.C., Oxley, J.E. and Silverman, B.S., (1996), Strategic alliances and inter-firm knowledge transfer, Strategic
Management Journal, 17(10),77-91.
Poulymenakou, A. and Prasopoulou, E., (2004), Adopting a lifecycle perspective to explain the transition from
technological innovation to alliance management, Management Decision, 42(9), 1115 – 1130.
Richard, A. S., Sten-Olof, H. and Pellas, L. H., (1995), Accelerating the commercialization of
technology: Commercialization through co-operation, Industrial Management & Data Systems, 95(1), 18 – 26.
Narayanan, V. K., (2001), Managing Technology and Innovation for Competitive Advantage. London, UK: Pearson
Education, Inc.
Rothwell, R. and Zegweld, W., (1985), Reindustrialization and Technology. London: Longman Group Limited.
Sastri, S.R.S., (1998), Column Flotation: Theory and Practice, pp. 44-63, Available Online at http://eprints.nmlindia.
org/4354/1/44-63.pdf [16 September 2012].
Schoenmakers, W. & Duysters, G., (2006), Learning in strategic technology alliances, Technology Analysis & Strategic
Management, 18 (2),245–264.
Shaista, E. K., Tomasz, M. and Bernstein, B., (2006), From invention to innovation: toward developing an integrated
innovation model for biotech firms, Journal of Product Innovation Management, 23(6), 528-540.
Sun, H., Chow, A. and Lo, C., (2008), Rapid commercialization of acquired innovation – a collaborative model based
on case studies in Chinese companies, International Journal of Innovation and Technology Management,
5(3), 363-379.
Timothy, L. P. and Dibrell, C. C., (2001), A process model of global strategic alliance formation, Business Process
Management Journal, 7(4), 349-364.
Warner, J., (2008), Innoventure create the future, http://www.swampfox.ws/node/25983 [10 June 2012].
Yin, R. K., (1984), Case Study Research: Design and Methods. London, Sage Publications.
Abstract
In this millennium, thanks to globalization and the development of information and communication technologies
(ICT), it has become evident that knowledge is the new source of creation of value and wealth (Drucker, 1999),
and emerges as a new factor of competitiveness intellectual capital (Brooking, 1997-a) (Lenart-Gansiniec, 2016)
(Alama, 2010). These intangible assets, which represent the intellectual capital, need to be identified, measured and
evaluated to manage them, using appropriate tools (Bueno, Rodríguez & Salvador, 2003). Because the development
of new information technologies determines a large part of our future (Harari, 2018), ICTs emerge as a support tool
to measure intellectual capital.
The objective of this work is to measure intellectual capital through four factors: human capital (Farias, 2011),
structural capital (Edvinsson & y Malone, 1999), relational capital (Capello & Faggian, 2005) and social capital
(Coleman, 1988) (Durston, 2000) (Baro, 2012). The study has focused on the career of Telecommunications
Engineering at the Pontifical Catholic University of Peru (PUCP), and its main contribution is to become a reference
guide for managing intellectual capital in other university careers (Fazlagic, 2005) (Bueno, 2004).
The methodology used in the research, part of a fieldwork based on interviews, applied to professors and
academic authorities of the career of Telecommunications Engineering of the Pontifical Catholic University
of Peru (PUCP), in which the levels were defined (competitive advantage, differentiating level, stable level
and critical level). The four pillars of intellectual capital were weighted and each one of the items was valued
through a survey. The sample consisted of fifteen teachers who presented research in the period 2012-2017.
The information collected was processed through an application software CI-FII (Pastrana, 2015), to measure
intellectual capital.
The results indicate that the measurement of intellectual capital in the career of Telecommunications Engineering
of the PUCP, reached a percentage valuation of 78.65%, placing it in a competitive advantage position, the Human
Capital contributes 22.60%, the Relational Capital 20.30%, Structural Capital 19.55% and Social Capital 16.20%.
The use of CI-FII software allowed the measurement of intellectual capital, becoming the technological support
necessary to manage intellectual capital in the career of Telecommunications Engineering. In this way, the
application software becomes a management tool for decision making.
Finally, the evaluation of intellectual capital was an important contribution to the career of Telecommunications
Engineering since each of the factors that generate value and inducers of success have been identified and measured,
the results of which will allow us to propose strategies to achieve competitive positioning in a globalized world like
the current one.
Keywords: Intellectual Capital, Human Capital, Structural Capital, Relational Capital, Social Capital
1. Introduction
Nowadays there are more quality requirements in the academic formation in universities and
knowledge emerges as a competitivity factor, for what it acquires relevance in its identification,
usage and management of tangible assets, which represent the Intellectual Capital in university’s
educational institutes, because they generate value, offer a sustainable strategic advantage and are
the key for future success.
Intellectual Capital conceptualization has been exposed by different authors. Edvinsson and Malone
(1999), the two pioneers in this matter, explain Intellectual Capital from this metaphor:
A useful way to see a company (or as will be seen, any organization) is to imagine it as a tree. The
trunk, branches and leaves, that is, the observer’s visible part, are the market’s knowledge of the
company and what accounting process expresses. The fruit represents the investors’ benefits and the
products clients consume. The hidden value of a company is at the roots, and to flourish and bear
fruit it must be nourished by strong and healthy roots.
It is the measure of the hidden value, of the intangibles from an organization who allows them to
develop, thus the identification, measurement and management of the intellectual capital is important
for decision making and the competitive positioning of the organization.
Stewart (1998), ¨The intellectual capital is constituted by gray matter: knowledge, information,
intellectual property, experience that can be used to create richness¨.
In this research, for the correct measurement of the Intellectual capital in the Telecommunications
Engineering Career of the Pontifical Catholic University of Peru (PUCP), it has been considered
as a theoretical reference the model CI-FII (Pastrana, 2015), based on the intellect model, which
structural base is formed by factors, elements and indicators, allowing the achievement of the
research’s presented objective.
Structurally the CI-FII model is conformed by four pillars: Human Capital, Structural Capital,
Rational Capital and Social Capital.
The Human Capital is conformed by factors which generate value and induce to the career
success: teachers’ competence, professional trajectory, technological scientific production, social
responsibility, innovation and technological transfer. Each of these factors has dimensions
helping on a better precision on the model. On the other hand, Structural Capital has the following
factors: strategies, organizational culture, processes, alignment, technological infrastructure and
applications and innovation. Relational Capital has as factors: users, image, strategic alliances and
service quality. Finally, Social Capital has three factors: dimensions, mechanisms and results. The
latter shows the value generated by networks formation and their corresponding indicators based
on trust, loyalty, sincerity, commitment, transparency, solidarity, responsibility, honesty and ethics
which were used in the research work (Pastrana, 2015, p.119).
The objective was to measure Intellectual Capital in Telecommunications Engineering Career of the
Pontifical Catholic University of Peru (PUCP). A survey was used as data collection technique and a
structured questionnaire as measuring instrument applied to fifteen (15) professors and two (02) career
authorities. Each variable was weighed: Human Capital (30%), Relational Capital (25%), Structural
Capital (25%) and Social Capital (20%). The ranges and intervals were defined: critical state (<=
50%), stable (<= 60%), differentiator (<= 75%) and competitive advantage (>= 75%). Each item was
assessed taking into account strengths and limitations. Measurement of Intellectual Capital was made
using CI-FII Intellectual Capital Measurement Software, reaching a percentage valuation of 79.62%.
This result positions Telecommunications Engineering Career-PUCP in a competitive advantage.
Human Capital was the greatest contributor to Intellectual Capital with 23.05%, followed by Relational
Capital 20.63%, Structural Capital 19.59%, and finally Social Capital 16.35%. The Intellectual capital
management, using Balanced Scorecard, is a proposal incorporated in the CI-FII software.
IAMOT 2019 | 261
Managing Technology for Inclusive and Sustainable Growth
2. Literature Review
The Intellectual Capital represents the intangible assets based in the knowledge, the organization’s
hidden value which generates value and induce to success and its management allows and generates
competitive advantages for the organization.
Sánchez et al. (as quoted in Yong, Rodriguez & Ruso, 2017) indicates that the Intellectual capital
is the combination of intangible assets and valuable capacities that allow the organization to
transform financial assets, materials and humans in a system capable of creating value for all
the agents linked to it.
The Intellectual capital has been introduced by (Sveiby, 1997) and (Stewart, 1998), Brookling
(1996), Roos et al (1997), Edvinsson and Malone (1999), Sullivan (2000), Bueno et al. (2003),
Kaplan and Norton (2004), Schleicher (2006), Salomon (2007), among others, and the tools of
measurement (Bontis, Dragonetti, Jacobsen, & Ross, 1999), Broking (1996), Edvinson and Sullivan
(1996), Ross et al. (1997), Sveiby (1997), Stewart (1998), Bueno (2003).
Ramirez and Manzaneque (2013), indicate that the information’s presentation about Intellectual
capital is relevant in universities considering that the principal activity of this institutions is to
generate knowledge, either through the scientific-technique research and professorate, in which
the most valuable intangible resources are their professors, administration staff and services and
students, along with their organizational processes and relationship networks, without leaving aside
their own university government.
The Intellectual capital represents an innovation factor of social impact in universities, being the
Human capital, Structural capital, Rational capital and Social capital the components that best fit to
the universities. Their identification and measurement generate competitivity (Yong, Rodríguez, &
Ruso, 2017).
Financial Perspective
Customer Perspective
Balanced Scorecard Kaplan & Norton (1992)
Internal Process Perspective
Learning and Developing Perspective
Market Assets
Intellectual Property Assets
The Technology Broker Brooking (1996)
Individual Focused Assets
Infrastructure Assets
Human Capital
Navigator of Skandia Structural Capital Edvinsson & Malone (1997)
Relational Capital
Human Capital
Intangible Assets Monitor Structural Capital Sveiby (1997)
Relational Capital
Human Capital
Direction by competencies Structural Capital Bueno (1998)
Relational Capital
Human Capital
Intelect Structural Capital Euroforum (1998)
Relational Capital
4. Findings
The applied methodology starts with variables’ definition, operationalization and identification, which
determined survey as data collection technique and structured questionnaire as measuring instrument.
This data collection technique has allowed gathering written information from a sample of persons.
Each professor and authority of Telecommunications Engineering Career of the Pontifical Catholic
University of Peru (PUCP) answered the questionnaire in a self-administered manner.
The weigh of each independent variable, according to its importance, was defined by authorities and
professors of the Telecommunications Engineering Career – PUCP:
IAMOT 2019 | 263
Managing Technology for Inclusive and Sustainable Growth
Table 2: Weighted Variables
They established two hierarchical levels, comprised by authorities and teachers, whose weight was
the same, according to their decision. The defined ranges and intervals to establish criteria from the
professional career’s point of view were the following:
Table 3: Ranges and Defined Intervals
<=50 Critical
<= 60 Stable
<=75 Differentiator
Factors that generate value and induce success, based on the Intellectual Capital pillars of the
Telecommunications Engineering Career-PUCP, were valued through a survey. The following
weighing took into account the strengths and limitations:
Table 4: Survey rating
A survey was applied to fifteen professors and two authorities of the Telecommunications
Engineering-PUCP professional career.
The CI-FII Intellectual Capital Measurement model (Pastrana, 2015) has four pillars: Human
Capital, consisting of the following factors that generate value and induce success: professor
competences, professional trajectory, technological scientific production, social projection
and university extension, innovation and technology transfer; each of these factors has
dimensions that help better define the model. Structural Capital has the following factors:
strategies, organizational culture, processes, alignment, technological infrastructure,
applications and innovation. Relational Capital has factors such as users, image, strategic
alliances and service quality. Social Capital has three factors: dimensions, mechanisms and
results. This research used all the factors.
Update
Recognition
Competencies Motivation
Satisfaction
Training
Professional Trajectory Professional level
HUMAN CAPITAL
Teaching experience
Teaching staff development.
Scientific Technological Scientific and technological production
Production Conferences
Researchs
Scientific recognition
Scientific meetings participation
CAPITAL
Strategic objectives
Monitoring
Estrategies Management tools
Support for the generation and transfer of
STRUCTURAL CAPITAL
knowledge
Organizational Culture Internalization
Suitable environment
Teacher predisposition
Processes Processes
Alignment Alignment
Technological Technologies
Infrastructure and Management Systems
INTELLECTUAL
Users profile
Users role
Users Users support
RELATIONAL CAPITAL
User success
Image Value perception
Providers Cooperation mechanisms
Communication mechanisms
Figure 5: Intellectual Capital Measurement Equation Model CI-FII, Source: Pastrana (2015)
In Structural Capital, the Technological Infrastructure and Applications factor obtained the highest
value with 89.38%. The greater strengths were its technological infrastructure as support for value
generation (basic infrastructure, laboratories, databasis, access to libraries, others), their computer
systems, programs effectiveness and applications, which support the Career’s activities. The minor
strength was the use of technology to safeguard, provide security and management of standards and
contingency plans. Organizational Culture factor had a value of 84.17%. Greater strengths were
Professors’ internalization of the organizational culture (values, regulations, commitment, etc.) to
execute strategies that add value to the Career, also the Professors’ predisposition to carry out jobs
inherent to the Career and to consider their environment as the most appropriate. Innovation factor
constitutes a minor Strength, valued with 78.33%; it evidences an Institution that promotes, creates
and generates patents. Alignment factor has 76.67%; according to Professors and authorities, the
career’s strategic objectives are aligned with the Institution’s strategy. These strategies, aligned with
their human resources and information technology programs, align the technological infrastructure
and its applications with processes that generate value. Strategy factor was valued with 70.63%.
A greater strength is the knowledge of the Career’s strategic objectives and the monitoring and
measurement of strategic objectives fulfillment. A major limitation is the use of management tools
focused on strategies implementation and support for knowledge generation and transfer. Finally,
Process Factor valued in 70% represents a minor limitation and its contribution to Structural Capital
is the smallest. It refers to work methods establishment processes and innovation promotion, its
information system, which allows decisions be made for continuous improvement and in general to
processes identification that generate value to the Institution.
5. Conclusions
1. Intellectual Capital of the Telecommunications Engineering Career – PUCP was
measured, the percentage value of 78,65% was obtained, placing it in a competitive
advantage position, the Human Capital contribute 22,60%, the Relational Capital
20,30%, Structural Capital 19,55% and Social Capital 16,20%.
2. The elaborated software, based on the pillars of the Intellectual Capital as technological
support to measure and manage the Intellectual Capital of the Telecommunications
Engineering Career – PUCP, allows to monitor the value generating factors and success
inductors, it can also be included as a part of the process of academic quality because
it points out one of the university objectives wich is to generate knowledge and it can
be aligned with the accreditation subject and the existing innovation programms in the
Superior Education institutions. In the same way, the utility of this tool will generate
impact, measured by its efffectiveness in the achievement of goals.
3. In the Telecommunications Engineering Career, the factors that make up the Human
Capital, Structural Capital, Relational Capital and Social Capital are important intangibles
wich represent the Intellectual Capital in this knowledge age, whose measurement will
generate sustainability and impact, given that the careers are continually working in the
improvement of processes, wich leads to a quality of the educative service they offer,
accrediting them as excellent and positioning them in a competitive advantage.
4. Recommendation
The use of the proposed study is recommended so that it can be extrapolated to other institutions; in
that way, the knowledge can be managed starting from the Intellectual Capital measurement, as it
allows to position the organizations in a competitive advantage.
5. Acknowledgements
To all professors and authorities of Telecommunications Engineering Career of the Pontifical
Catholic University of Perú, for their collaboration in answering the Intellectual Capital survey.
References
Alama, E. (2010). Capital Intelectual y Ventaja Competitiva. Lima, Perú: San Marcos.
Baro, M. (2012). Jerarquización de stakeholders para la construcción del capital social de las organizaciones.
Mediaciones Sociales, 135-161.
Baruch, L. (2001). Intangibles - Management, Measurement, and REporting. Washington D.C.: The Brookings
Institution.
Bontis, N., Dragonetti, N., Jacobsen, K., & Ross, G. (1999). The knowledge Toolbox: A Review of Tools Available to
Measure and Manage Intangible Reources. European Management Journal, 391-402.
Brooking, A. (1996). Intellectual Capital. Core Asset for the Third Millenium Enterprice. Recuperado el 23 de
noviembre de 2010, de London: International Thompso Business Press.
Brooking, K. (1997-a). The management of intellectual capital. Long Range Planning, 364-365.
Bueno, E. (2004). Gestión del Conocimiento en Universidades y Organismos públicos de Investigación. Madrid:
Dirección General de Investigación, Consejería de Educación de la Comunidad de Madrid.
Bueno, E., Rodriguez, O., & Salvador, M. (2003). La importancia del Capital Social en la Sociedad del Conocimiento:
Una propuesta de un modelo integrador de Capital Intelectual. . Ponencia presentada en el I Congreso
INternacional y Virtual de Intangibles. Obtenido de www.iade.org/files/rediris1.pdf
Capello, R., & Faggian, A. (2005). Collective learning an relational capital in local innovation processes.
Coleman, J. (1988). Social Capital in the Creation of Human Capital. The American Journal of Sociology, 94, 95 - 120.
Drucker, P. (1999). La Sociedad Postcapitalista. Buenos Aires, Argentina: Sudamericana.
Durston, J. (2000). ¿Qué es el capital social comunitario? Santiago de Chile: CEPAL.
Edvinsson, L. & Malone, M. (1999). El capital intelectual: cómo identificar y calcular el valor inexplorado de los
recursos intangibles de su empresa. Bogotá: Grupo Editorial Norma S.A.
Edvinsson, L., & Sullivan, P. (1996). Developing a model for managing Intellectual Capital. European Management
Journal, 356-364.
Edvinsson, L., & y Malone, M. S. (1999). El capital intelectual. Barcelona: Gestión 2000.
Farias, A. (2011). Dirección del Capital Humano. Méxcico D.F.: Trillas.
Fazlagic, A. (2005). Measuring the capital intellectual of a university. Trends in the Management of Human Resources
in Higher Education.
González, J. (2009). El Capital Intelectual y sus Indicadores en el Sector Industrial. Colombia: TEACS.
Harari, Y. (2018). 21 lecciones para el siglo 21. Debate.
Kaplan, R., & Norton, D. (2004). Mapas Estratégicos. Convirtiendo los Intangibles en Resultados Tangibles. España:
Vigor.
Lenart-Gansiniec, R. (2016). Relational Capital and Open Innovation- In Search of Interdepencies. Acta Universitatis
Agricultarae et Silviculturae Mendelianae Brunensis, 64(6), 2007-2013.
Pastrana, N. (2015). Modelo de Medición del Capital Intelectual para Carreras Acreditadas de Ingeniería Industrial
(Tesis Doctoral). Lima, Perú: Universidad Nacional Mayor de San Marcos.
Rodríguez, P., & Román, C. (2005). El capital social como factor de competitividad y desarrollo empresarial. Ekonomiaz,
214-231.
Roman, N. (2005). Capital intelectual generador de éxito en las empresas. Visión Gerencial, 67-79.
Roos, J., Roos, G., Dragonetti, C., & Edvinsson, I. (1997). Intellectual Capital: Navigatong in the New Business
Landscape. London: McMillan Business.
Salomón, A. (2007). Educación y recimiento en Méxio y América Latina. Comercio Exterior, 741-755.
Schleicher, A. (2006). The economics of knowledge: Why the education is key for Europe’s success. Lisboa: The Lisbon
Council Policy Brief.
Stewart, T. (1998). La nueva riqueza de las organizaciones: el capital intelectual. Ediciones Granica: Barcelona.
Sullivan, P. (2000). Value-Driven Intellectual Capital: How to Convert Intangible Corporate Assets into Market Value.
New York: Wiley.
Sunkel, G. (2003). La pobreza en la ciudad: capital social y políticas públicas. En R. Atria, Capital social y reducción
de la pobreza en América Latina y el Caribe: en busca de un nuevo paradigma. Sanntiago: Comisión
Económica para América Latina y el Caribe (CEPAL).
Sveiby, K. (1997). Capital Intelectual la nueva riqueza de las organizaciones, como medir y gestionar los activos
intangibles para crear valor. Barcelona: Gestión 2000.
Yong, L., Rodríguez, J., & Ruso, F. (09 de Agosto de 2017). Espacio abierto. Cuaderno Venezolano de Sociología.
Obtenido de EBSCO: Retrieved from http://ezproxybib.pucp.edu.pe:2048/login?url=http://search.ebscohost.
com/login.aspx?direct=true&db=a9h&AN=129014371&lang=es&site=ehost-live
Paul Kwangwari
Department of Engineering and Technology Management,
Graduate School of Technology Management, University of
Pretoria, Pretoria, South Africa
E-mail: kwangwarip@gmail.com
Anthon P. Botha
Department of Engineering and Technology Management,
Graduate School of Technology Management, University
of Pretoria, Pretoria, South Africa
TechnoScene (Pty) Ltd, The Willows, Pretoria, South Africa
E-mail: anthon@technoscene.co.za
Abstract
This paper presents a case study of experiences of operations personnel in a South African petrochemical company
during the acquisition of technologies from external suppliers on the success of technology and knowledge transfer.
South African and, broadly, African companies are reliant on technology suppliers in developed countries. Increasingly
research on technology and knowledge transfer is focused on the experiences of Asian and Latin American companies,
with less focus on African and more specifically South African companies. In South Africa, technology transfer
projects often leave maintenance personnel with inadequate capabilities to maintain the technologies.
A detailed literature survey was done on technology and knowledge transfer constructs, mechanisms and factors
that affect transfer, measures of success in transfer and models of transfer. Qualitative research was conducted that
sought to uncover insights on and experiences in technology and knowledge transfer within a particular case. An
electronic web-based survey was used to collect data. A conceptual model was drawn up based on an understanding
of the topic in the literature and gaps identified through the literature review. The conceptual model included
technology and knowledge needs, technology and knowledge transfer processes, outcomes of the respective
transfer projects; technology complexity, internal factors influencing the recipients and external factors shaping the
transferor behaviour.
Through insights gained in this research, initial understanding of reasons for poor technology and knowledge
transfer is related to different approaches at different levels in the systems hierarchy. The more integrated a system
is (subsystem and system level), the more likely that the transfer will be successful. Technology managers should
take note of this aspect and exercise great care when technology and knowledge transfer takes place at component
level. This may be due to the fact that the system or subsystem as a whole is guaranteed by the supplier or local
maintenance services are in place reducing the technical burden on internal maintenance and technical support
services. Indicators and factors were identified that lead to the success of technology and knowledge transfer.
Recognising the level of complexity, ensuring a good communication protocol between transferor and transferee
and closing the gap between technology and knowledge transfer should be on the priority agenda of a technology
manager when advanced technologies are transferred into the enterprise.
This paper is adding to the body of knowledge on technology transfer in management of technology. It links
successful transfer to source of technology, maturity of technology, the level of complexity of the technology
transferred, follow-through support by the transferor, the scale of technology transfer and the influence of
systems levels. Knowledge transfer that supports the technology transfer is discussed in terms of the dimensions
of knowledge transfer, engineering discipline that is involved, skills, communication, attitudes and other factors.
Learning from this work, technology managers will be able to tightly specify technology and knowledge transfer
standards for optimising success.
Keywords: Technology Transfer, Knowledge Transfer, Systems Complexity, Success Factors
1. Introduction
The South African petrochemical industry was established many decades ago, and in the case of
chemical manufactures, more than 100 years ago (Simon and Sohal, 1995; Majozi and Veldhuizen,
2015). The petroleum industry contributes significantly to the South African economy recording
a combined turnover of R300 billion in 2015 (SAPIA, 2015; Majozi and Veldhuizen, 2015).
As Erdilek (1984) points out, the competitiveness of companies is derived from internally or
externally acquired technologies in an environment of rapid and disruptive change. Petrochemical
companies in South Africa, and other developing countries are dependent on technology transfer
from developed nations for their technological capabilities (Erdilek, 1984). While the subjects of
technology transfer and knowledge transfer (hereafter TT and KT) are receiving significant focus
from both academic and industry practitioners, focus has largely been on certain aspects of TT
and KT in developed countries as well as the experiences of Asian and Latin American countries.
TT and KT research focused on TT and KT outcomes in Africa and South Africa in particular is
limited. More specifically, an analysis of TT and KT outcomes in the petrochemical industry is
necessary, given the reliance of the industry on foreign technologies. Anecdotal experiences in
the industry in terms of maintenance and plant performance beg the question: how well are South
African petrochemical companies able to absorb technologies and knowledge transferred from
external suppliers? This paper seeks to contribute to an understanding of TT and KT outcomes by
analysing the experiences of one of South Africa’s large petrochemical companies from which a
brief overview of anecdotal evidence is discussed.
A number of large projects have been implemented in this company with varying outcomes
in terms of project objectives and maintenance capabilities. Two examples from one of the
company’s business units will be discussed. A catalytic cracker plant was built and commissioned
in 2006 as a multidisciplinary project with multiple work streams involving the use of proprietary
technologies. The experiences of operations personnel post the implementation of this project,
more specifically with certain parts of electrical technologies installed in this plant (namely the
medium voltage variable frequency drives (VFDs)) highlight the challenges facing operations and
maintenance personnel post the acquisition of such complex technologies. Variable frequency
drives are used to drive large compressor machines with a combined output power of 40 MW
representing some of the largest machines in the country. This proprietary, complex VFD with
integrated programmable logic controller (PLC) systems was designed by an overseas manufacturer
utilising proprietary systems for which there are strict conditions for warranty purposes. Whilst
the petrochemical company has a team of electrical engineers and technicians providing technical
support for the electrical infrastructure, support for this VFD system was problematic. The local
representative of the technology supplier does not have the technical expertise to support this
system and the system designers are based in the United States of America. Training provided
to technicians on this system was inadequate due to the integrated nature of the system. Costly
downtime of the system occurred taking on average 24-36 hours to resolve the failures. This
system provides a good example of technology acquisition projects that exhibit less than the
desired outcomes and highlights the need for a focused study to derive lessons learnt that can lead
to more effective TT and KT in the future.
Another example that reflects a different challenge related to TT and KT is a modular water
treatment plant that was constructed in 2014. The modular design and construction of the plant
represented beneficial advancements in the design and construction of water treatment plants. While
a local company supplied the plant, major technologies forming part of this plant were sourced
overseas. This plant was constructed on a build, own, operate and maintain agreement after which
a decision was made to procure the plant. An assessment of the installed technologies and available
documentation was conducted and it was clear that much of the documentation required for effective
operation and maintenance of the plant was not available. In effect, the acquisition and transfer of
this plant changed from a simple to a complex exercise. While the challenges in this example are
different from the first, this project demonstrates the need to examine TT and KT outcomes within
the petrochemical company. This project will provide insights to improve TT and KT outcomes in
the specific petrochemical company examined, and it is believed that the learning applies to the
South African industry in general.
2. Literature Survey
The subject of TT is an emerging discipline (Reisman, 2005) with increased research focus since the
latter part of the 20th century (Reddy and Zhao, 1990). In their review of research work in the field
of international TT, Reddy and Zhao (1990) pointed out that research findings and knowledge in
this field remain fragmented along different specialisation disciplines. This characterisation seems
to be the prevailing status quo, as highlighted yet again by Reisman (2005) in his cross disciplinary
taxonomy of the field of TT. Reisman (2005) points out that this status quo is a result of the fact
that researchers of TT emanate from various disciplines, such as management studies, engineering,
economics, anthropology and the social sciences. As such, while significant contributions have been
made to the body of knowledge and the practice of TT, such contributions have been made within
narrow disciplinary confines. This literature survey will begin with a discussion of TT and KT
constructs and how they are related followed by a discussion of TT, transfer mechanisms and factors
that influence TT outcomes, measures of successful TT and KT as well as TT models.
together tangible and intangible aspects of technology embodied in the trio: product, process and
management of the enterprise. This perspective of technology almost self-evidently leads to the
consensus that technology transfer needs to integrate not only the physical technical assets, but
also the knowledge required to utilise the assets. A brief overview of research focus on knowledge
is relevant for a more complete view of technology and TT, before turning more specifically to the
subject of TT.
Gopalakrishnan and Santoro (2004) provided a more thorough overview and discussion of the
distinction between the constructs of knowledge and technology as well as knowledge and technology
transfer. As they point out, the relationship between knowledge and technology is both complex and
variously interpreted (Gopalakrishnan and Santoro, 2004). Some researchers think of technology
transfer and knowledge transfer as interchangeable terms due to the view that the creation of new
knowledge is always linked with the absorption and understanding of some new technology while
for others technology is a form of knowledge. Other researchers holding this conflated view of
technology and knowledge point out that the personal interaction across organisations involved in
the transfer of technology eventually leads to new knowledge (Gopalakrishnan and Santoro, 2004).
They, however, argue that technology and knowledge are two different constructs that constitute
different activities. Technology is a much narrower construct than knowledge which refers to ‘tools,
methodologies, processes and products” while knowledge is a broader term that includes learning
and is reflected in activities such as the organisation’s strategy, culture and work processes. As such
technology is know-how while knowledge is more know-why (Gopalakrishnan and Santoro, 2004).
Knowledge involves “cognitive structures that represent reality” and “takes on conceptual meaning
by application”.
clear that there is no singular understanding of the term ‘technology transfer’ and disciplinary biases
are apparent.
Spin-off is often interpreted as TT in which the technology originates from government, university
or private R&D centres (Rogers et al., 2001). Licensing concerns the granting of rights by an
authorised person or organisation to another person or organisation, in which the recipient party
is authorised to utilise or sell a certain product, design or innovated process (Rogers et al., 2001;
Lee and Win, 2004; Lema and Lema, 2013) . Publications, Rogers et al. (2001) note, can also be a
means of TT, although, due to the fact that they are written primarily for the scientific community,
it is not easy for industry audiences to assimilate these innovations. While Rogers et al. (2001) list
meetings as person-to-person interactions in which TT may take place, this seems to be a less formal
TT mechanism. Cooperative agreements are legal frameworks in which two organisations agree to
share intellectual property rights and even personnel, and cooperate in the development of certain
technologies (Lee and Win, 2004). Cooperative agreements are similar to joint ventures in which
two organisations undertake a combined business venture in which there is shared ownership of
intellectual property rights and even personnel, in the development of certain technologies ( Lee
and Win, 2004 and Lema and Lema, 2013). For Lema and Lema (2013), trade as a TT mechanism
refers to the importation of technologies produced outside the country and may involve arm’s length
purchases or turnkey projects or service contracts. Foreign direct investment on the other hand is
the establishment of a wholly owned subsidiary company in a host country by a company from
another country (Lema and Lema, 2013). Local technology for Lema and Lema (2013), refers to
the innovation and production of technologies by a local technology company and this may involve
linkages with local university research centres.
In view of the success and failures of TT, some attention has been given to understanding factors that
affect TT. Lai and Tsai (2009) provide a helpful summary of some important factors that affect TT,
namely, market scale, product life cycle, government, size of the organisation, culture, experience,
age, R&D, attitude, education, authority, communication, complexity, codification and diffusion.
2.1.5. TT Models
Numerous quantitative and qualitative models for TT are presented in the literature (Khabiri et al.,
2012; Mohamed et al., 2012; Mohaghar et al., 2012; Waroonkun and Stewart, 2008). As Khabiri
et al., (2012) point out, these models have different objectives and have tended to be developed
for certain specific TT contexts, for example TT between developed and developing countries
(Bommer et al., 1991; De Castro and Schulze, 1995); TT from university and research organisations
to industry recipients (Warren et al., 2008); and intra-organisational TT (Malik, 2002). Qualitative
models aim to describe the activities involved in managing TT processes as well as to outline the
factors that lead to successful TT. Quantitative models on the other hand seek to quantify important
TT parameters and maximise the compatibility between the transferor and transferee. Examples of
quantitative models are: one that was designed and applied to the acquisition of aircraft engines (Liu
1993); and a quantitative decision model that makes use of technology transfer linkages as the key
criterion (Lulu et al.,1996).
Junior et al. (2014) provide an overview of TT models that have been developed and used since the
1950s. Firstly, the appropriability model developed in the 1950s stated that formal TT mechanisms
were not necessary and that TT was effected simply through direct communication between the
potential technology user and the research organisation (Gibson and Smilor, 1991; Junior et al.,
2014). Secondly, the dissemination model developed between 1960 and 1970 focused on the flow
of technological innovations from expert developers to users and presumed that once a link is
established between the innovation developers and the users, TT takes place naturally. Of course,
as Gibson and Smilor (1991) point out, this is hardly the case. Thirdly, the knowledge utilisation
model developed in 1987 (Gibson and Smilor, 1991; Junior et al., 2014) took into account the
interactive communication between the technology transferor and transferee as well as the barriers
against and facilitators of effective TT. As Gibson and Smilor (1991) point out, the weakness of
this model lay in its linearity which greatly minimised complex TT processes to a set of linear
TT activities. Fourthly, Rebentisch and Ferretti, (1995) and Junior et al., (2014) proposed a TT
model consisting of transfer scope, transfer method, knowledge architecture and organisational
adaptive ability. The model seeks to take into account the impact of technology type on the effort
required for effective TT and the transferee’s competencies and how they impact the TT process.
Fifthly is the Malik (2002) broadcast model, a two way iterative intra-firm TT model (Waroonkun
and Stewart, 2008; Junior et al., 2014). Sixthly, Guan et al. (2006) proposed an innovation model
that includes the phases of: acquisition, assimilation and technology improvement (Junior et al.,
2014). Seventhly, Junior et al. (2014) also discuss the Ettlie and Elsenbach (2007) stage gate
model for product development. Sardana et al. (2010) proposed a more detailed stage-gate model
for TT projects. As Sardana et al. (2010) point out, this model was intended for large and complex
projects and later generalised most TT projects.
It is clear that numerous TT models have been proposed for various TT contexts and in some cases,
there is a convergence with traditional stage gate models. This might be expected, since TT in
industrial contexts is mostly executed in terms of projects.
5. Results
A total of 72 responses were obtained, out of 288 participants to whom the survey was sent out, which
equates to a response rate of 25%. Forty nine complete survey results were utilised in the analysis
to minimise distortions due to incomplete responses. The analysis of the results provided answers to
the research questions posed. Respondents provided feedback on technology and knowledge transfer
through various large and complex projects implemented within the company in the last 10 years.
5.1.5. Scale of TT
In 51% of responses, TT took place at plant level, while in 23 %, TT was at systems level. Less than
15% of TT was at assembly, component or material level reflecting limited TT capability at lower levels.
The indication is that TT was progressively poorer from system to component level which showed
deteriorating TT capabilities at lower levels. Perceptions of TT success across different disciplines
are shown in Table 1. (Two colours in a cell mean equal weight).
Electrical
Mechanical
Control & Instruments
The electrical and process disciplines had the weakest TT outcomes compared to the other disciplines
while the mechanical discipline had the most positive TT outcomes and exhibited the opposite
trajectory of better TT outcomes at lower levels.
Feedback on the perceptions of TT indicates that there are significant constraints that limit the success
of TT in the company, an area that requires greater focus from academia and industry practitioners in
order to enhance TT outcomes in the South African context.
Overall, more respondents viewed KT as moderately successful across most dimensions than
those that rated KT as successful indicating significant constraints on the success of KT during
TT projects. Feedback indicated greater KT in terms of know-what, know-when, and know-how
compared to know-why and know-who.
Perceptions on the success of KT by different disciplines are shown in Table 2. (Two colours in a
cell mean equal weight).
Table 2: KT Success over KT Dimensions as Perceived by Different Disciplines
Discipline KT Dimensions
Know What Know When Know How Know Why Know Who
Electrical
Mechanical
Control & instruments
Process & production
Poor
Moderately successful
Successful
Only process and production personnel perceived KT as successful across all KT dimensions. In
all the other disciplines, KT was seen as moderately successful in most of the KT dimensions. Poor
ratings of KT in terms of know-when for electrical and know-who for mechanical highlight the most
deficient areas.
7. References
Bommer, M. R. W., Janaro, R. E. & C., L. D., (1991), A Manufacturing Strategy Model for International Technology
Transfer. Technological Forecasting And Social Change, 39, 377-390.
De Castro, J. & Schulze, W. S., (1995), The Transfer of Technology to Less Developed Countries: A Model From
The Perspective Of The Technology Recipient. The Journal of High Technology Management Research,
6, 113-126.
Erdilek, A., (1984), International Technology Transfer in the Middle East and North Africa. Management Decision,
22, 45-49.
Ettlie, J. E. & Elsenbach, J. M., (2007), Modified Stage-GatesRegimes in New Product Development. Journal Of
Product Innovation Management, 24, 20–33.
Gibson, D. V. & Smilor, R. W., (1991), Key variables in technology transfer: A field-study based empirical analysis.
Journal of Engineering and Technology Management, 8, 287-312.
Gopalakrishnan, S. & Santoro, M. D., (2004), Distinguishing Between Knowledge Transfer and Technology Transfer
Activities: The Role of Key Organizational Factors. IEEE Transactions On Engineering Management, 51, 57-69.
Guan, J. C., Mok, C. K., Yam, R. C. M., Chin, K. S. & Pun, K. F., (2006), Technology transfer and innovation
performance: Evidence from Chinese firms. Technological Forecasting and Social Change, 73, 666-678.
Junior, M. V., Lucato, W. C. & Vanalle, R. M., (2014), Effective management of international technology transfer
projects: Insights from the Brazilian textile industry. Journal of Manufacturing Technology Management,
25, 69-99.
Khabiri, N., Rast, S. & Senin, A. A., (2012), Identifying Main Influential Elements in Technology Transfer Process: A
Conceptual Model. Procedia - Social and Behavioral Sciences, 40, 417-423.
Lai, W.- H. & Tsai, C.-T., (2009), Fuzzy rule-based analysis of firm’s technology transfer in Taiwan’s machinery
industry. Expert Systems with Applications, 36, 12012–12022.
Lee, A. H. I., Wang, W.- M. & Lin, T.-Y., (2010), An evaluation framework for technology transfer of new equipment
in high technology industry. Technological Forecasting and Social Change, 77, 135-150.
Lee, J. & Win, H. N., (2004), Technology transfer between university research centers and industry in Singapore.
Technovation, 24, 433-442.
Lema, A. & Lema, R., (2013), Technology transfer in the clean development mechanism: Insights from wind power.
Global Environmental Change, 23, 301–313.
Lin, B.-W. & Berg, D., (2001), Effects of cultural difference on technology transfer projects: an empirical study of
Taiwanese manufacturing companies. International Journal of Information Management, 19, 287-293.
Liu, W. G., (1993), A Quantitative Technology Transfer Model and Its Application to Aircraft Engines. Technological
Forecasting and Social Change, 44, 179-186.
Lulu, M., Seyoum, G. & Swift, F. W., (1996), A Decision Model For Technology Transfer. 19th International Conference
on Computers and Industrial Engineering,. 37 -40.
Majozi, T. & Veldhuizen, P., (2015), The chemicals industry in South Africa. CEP. AIChE.
Malik, K., (2002), Aiding the technology manager: a conceptual model for intra-firm technology transfer. Technovation,
22, 427–436.
Mohaghar, A., Monawarian, A. & Raassed, H., (2012), Evaluation of technology transfer strategy of petrochemical
process. Journal of Technology Transfer, 37, 563–576.
Mohamed, A. S., Sapuan, S. M., Megat Ahmad, M. M. H., Hamouda, A. M. S. & Hang Tuah Bin Baharudin, B.
T., (2012), Modeling the technology transfer process in the petroleum industry: Evidence from Libya.
Mathematical and Computer Modelling, 55, 451-470.
Osabutey, E. L. C., Williams, K. & Debrah, Y. A., (2014), The potential for technology and knowledge transfers
between foreign and local firms: A study of the construction industry in Ghana. Journal of World Business,
49, 560-571.
Póvoa, L. M. C. & Rapini, M. S., (2010), Technology transfer from universities and public research institutes to firms
in Brazil: what is transferred and how the transfer is carried out. Science and Public Policy, 37, 147-159.
Rebentisch, E. S. & Ferretti, M., (1995), A knowledge asset-based view of technology transfer in international joint
ventures. Journal of Engineering and Technology Management, 12, 1-25.
Reddy, M. N. & Zhao, L., (1990), International technology transfer: A review. Research Policy, 19, 285-307.
Reisman, A., (1989), Technology Transfer: A Taxonomic View. Technology Transfer, 14, 31-36.
Reisman, A., (2005), Transfer of technologies:a cross-disciplinary taxonomy. The International Journal of Management
Science, 33, 189-202.
Rogers, E. M., Takegami, S. & Yin, J., (200), Lessons learned about technology transfer. technovation, 21, 253-261.
SAPIA, (2015), 2015 Annual Report. South African Petroleum Industry Association.
Sardana, G. D., Jagoda, K., Maheshwari, B. & Lonseth, R., (2010), Key issues in managing technology transfer projects:
Experiences from a Canadian SME. Management Decision, 48, 366-382.
Simon, C. D. & Sohal, A. S., (1995), The changing strategic vision of South African manufacturing: The case study of
the chemical industry. Industrial Management & Data Systems, 95, 14-20.
Stock, G. N. & Tatikonda, M. V., (2000), A typology of project-level technology transfer processes. Journal of
Operations Management, 18, 719–737.
Sunaoshi, Y., Kotabe, M. & Murray, J. Y., (2005), How technology transfer really occurs on the factory floor: a case of
a major Japanese automotive die manufacturer in the United States. Journal of World Business, 40, 57-70.
Sung, T. K., (2009), Technology transfer in the IT industry: A Korean perspective. Technological Forecasting and
Social Change, 76, 700-708.
Waroonkun, T. & Stewart, R. A., (2008), Modeling the international technology transfer process in construction projects:
evidence from Thailand. Journal of Technology Transfer, 33, 667–687.
Warren, A., Hanke, R. & Trotzer, D., (2008), Models for university technology transfer: resolving conflicts between
mission and methods and the dependency on geographic location. Cambridge Journal of Regions, Economy
and Society, 1, 219–232.
Welman, C., Kruger, S. & Mitchell, B., (2005), Research Methodology, Cape Town, South Africa, Oxford University
Press.
Priyadarshini Singh
Indian Institute of Technology, Kharagpur, India
E-mail: priyadarshinisingh92@iitkgp.ac.in
Atul Singhal
Indian Institute of Technology, Kharagpur, India
E-mail:atulkrsinghal654@iitkgp.ac.in
Gouri Gargate
Indian Institute of Technology, Kharagpur, India
E-mail: gouri@rgsopil.iitkgp.ac.in
Abstarct
Academicians around the world put their sweat and blood in the paradigm they believe in. Little do they know the
economic potential it holds. The whole process of creation and building that naïve invention into a full-fledged market
product requires a constant effort and the basic step involved is identification of such market driven Intellectual
Property (IP). IP is very precious in today’s economy and its existence becomes crucial if the creator of such IP is
unaware of the commercial potential it cajoles. The IP creator might not have an expertise to understand the economic
intricacies which an IP possess. To understand these economic intricacies and to value IP, experts have suggested
various IP valuation methods. However, for any IP valuation to follow, the first step is IP evaluation. Moreover,
this lag in understanding usually widen because an IP involves expertise from law, management and technology to
handle it well. In this paper, authors have tried to pull all the relevant data with reference to IP management (IPM),
of one of the academic units of Institute of National Importance (INIs) and tried to structure the same in an IPM audit
model. This structured data is further analyzed to develop an IP evaluation framework which is a first step towards
IP valuation. This IP evaluation framework may help IP valuators to manage cumbersome processes of IP valuation
efficiently and to assign the value to an IP under consideration. Thus, the system will help IP creators to self-evaluate
their IP. The authors have adopted exploratory, case study research methodology. The focus of the research is limited
to 8 types of IP which can be generated by academic institution. The study demonstrates exploration of IPM audit
model to reduce complexity involved in IP evaluation.
Keywords: Intellectual Property, IP Evaluation, IP Valuation, IPM Audit Model, Academicians
1. Introduction
As the Intellectual Property (IP) generation capacity of an organization increase, the management of
those IP becomes inevitable task. IP generation is a part of IP management. IP Audit being the first
step towards IP Management, it becomes essential to know the pre-requisite of the same. IP audit
is an efficient and the most effective way by which any organization can develop its IP portfolio or
increase the revenue generated by the IP owned.1 The review of the IP held and their performance to
mitigate risks if any, and device effective technique for a better performance of IP, remedy the issues
and manage the IP system is the most important objective of an IP audit. On the basis of effective
IP audit the IP policy and IP strategy of the organization are designed which aims at assessment and
revision of IP owned, licensed-in, licensed-out, acquired or rented. The review serves as an insight
for an organization to see the better performing IPs and to identify and understand the weaknesses
and strengths it holds. Through IP audit an organization gathers a huge data of the existing technology
and the strategies which would transform them into future technologies through implementation of
various evaluative processes.2 It contains data regarding the IP owned by the organization, the IP
under conflict, Infringed IPs if any, the actions taken to achieve an organizations objective, etc.
The leverage point is an organization’s IP audit can be done in various ways. The standard general
classification of IP audit being the broad IP audit and a narrow IP audit. Further it is categorized as
general-purpose IP audit; event driven IP audit and limited purpose focused IP audit.3 IP audit does
not only serve as the balance sheet for the organization but also is a self-assessing document for the
organization and increases the awareness. It involves the evaluation of the IPs and highlights the
strength and weakens of an organization, helps in minimizing the issues involving third party relating
to ownership, infringement and also helps in better planning and positioning those technologies.4
IP audit involves collection of data, preparation of audit plan, conducting an audit, review of the
existing IP strategy, scrutinizing of the IP and examining IP contracts and agreements and also the
review of information flow in an organization.
The aim of IP audit is governed by the objective it is being implemented. IP Audit helps in effective
realization of the value of the IP assets. Important aspects like significance of IP, the management
level issues with reference to IP mapping of existing IPs and formalization of IP strategy/ policy are
the essence of the IP audit also it governs the linking of IP strategy with business strategy which is
crucial to any entity in today’s marketplace.
After IP audit, follows the evaluation of the information collected in relation to IPs. The evaluation
of the data is important step as its analysis gives direction to IP policy and strategy which helps in
recommending the best practices. The IP evaluation process engages in IP generation, increasing
efficiency, reduction of cost associated with IP and productivity of IP portfolio.5 IP evaluation helps
in determining the monetary value of the IP portfolios. The process of evaluation helps in decisions
making where business planning is involved. Once the organization reaches the IP evaluation
stage, issues like joint ventures, licensing, acquisitions, mergers, investments, loans against IP etc.
are examined in micro detail. These securitization of IP assets has been widely practiced and has
become indispensable part of the financial transaction of an organization. During the investment
decisions the financial quality and quantity of IP asset is considered. Through IP evaluation a
well-structured IP portfolio and IP strategy are integrated to produce revenue and attract investors
which would in turn help in development of organization’s IP asset further. The IP assets are listed
and evaluated to ensure the ownership of IPs and asses their value in relation to the organizations
policy. IP evaluation of assets particularly IP is crucial for various purposes such as funding of any
venture, mergers and acquisitions, licensing.
Indian academic organizations like institutes of national importance (INI) being the pioneer in
inventions and innovation involving technologies are reservoirs of IP. However, lack of IP awareness
does not allow them to extract value. Evaluation of IP for academic institution becomes elementary
as the investment in the form of legal fees for the whole life cycle of the IP and its maintenance is
the primary investment. The investment used for turning an invention into a functioning technology
involving various innovation can be handled efficiently when an IP portfolio is thoroughly evaluated.
Once the portfolio is developed it can be put out into the market for licensing or other revenue
generating activities. A few academic institutes usually recoup the investments as soon and as
efficiently to pump in the funds for next R&D which would generate another IP. Since, the institutes
have this cyclic pattern hence the evaluation of IP becomes the next important step after IP audit.
The use of IP evaluation in any research institute is to facilitate6 the following actions:
a. Decision making: is very crucial during development and exploitation stage of any IP.
A correct IP evaluation can change the fate of the IPs of academic institute and can
strategically place them above different entities involved in IP generation market.
b. Adding value to IP assets: the invention has certain value at its R&D stage.
The investment made in R&D can be recouped by a well-planned and well-structured
IP evaluation.
c. Communication: well-founded decision is the masonry of the IP owned by the academic
institutes. The decision involving the IP should be formulated and communicated as
necessary and required among its stakeholders like teachers, research staff, students and
the third party if any. IP evaluation facilitates and gives the necessary direction to the same.
d. Indicator/ monitoring: the allocation of funds during any R&D project is critical in future
output. Whether the concern invention has been allocated adequate amount of funds and
the return generated by the inventions are adequate can be answered through IP evaluation.
Academic institutions like Indian Institute of Technology have become hub for invention and research
which impact the society at large. These academic institutes have served us with great inventions
and annually generate a huge amount of IP. Indian Institute of Technology, Kharagpur aims to serve
the national interest and provide broad-based education. It helps students in development of their
professional skills and acquire the best in research and further their interests. It aims to imbibe a
spirit of entrepreneurship and innovation in its students and to undertake sponsored research and
provide consultancy services in industrial, educational and socially relevant areas.
Established in 1951, Indian Institute of Technology (IIT) Kharagpur started the institute’s functioning
with 224 fresher’s, 42 teachers and 10 departments. The institute has grown now with about 40
academic units, 11500 students and 700+ faculty members. With time IIT Kharagpur has expanded
its research domains from core engineering to life sciences, management, IP law, psychology etc.
with an introduction of various interdisciplinary studies.
Also, opportunity of cross-cutting research across disciplines in science, technology, medicine,
law and the humanities, advance manufacturing, transportation technologies, healthcare & medical
technology, innovative infrastructure, digital convergence, geoscience for future of earth, climate
change, bioscience, data science also exists in IIT Kharagpur.
IIT Kharagpur has made a mark and rated as top three research institutions in India, by the Department
of Science and Technology (Department of Biotechnology) and National Institutional Ranking
Framework (NIRF). About 2000 research papers are published each year by researchers. The institute
files about 50-100 patents in a year. IIT Kharagpur has been awarded the top academic institute for
patents, 2016 by Indian intellectual property office and Confederation of Indian Industries (CII).
About 300 R&D sponsored projects are undertaken every year, valued at Rs 150-200 Crore.
2. Literature Review
Intellectual Property (IP) is formalization of ideas into a workable manner. Evaluation of ideas into
an applicable and professional product and/or process generates further technologies and devices.
IP serves as the key element for any organization which builds the value and future technologies.
It has major role in institute restructuring and accordingly IP strategies, vision, goals and managing
tools are evolved and evaluated on a continuous basis. The evaluation of IP is a continuous process
and cannot be fixed in a block structure. It must be conducted on a cyclic basis. Activities involving
managing, protecting and risk analysis of IP are interwoven to evaluation process.
The evaluation process is so essential to IP that we may not find separate mention of them, but
they are practiced and employed daily. The knowledge driven Institutes embrace the lifecycle of IP
from its idea generation stage till technology maturation and consider the core challenges involved
in the process. Evaluation process provides solution to the challenges and alerts them accordingly.
The management of IP becomes very smooth and efficient with evaluation process being integrated
in the functioning system of the institutes.
IP evaluation is not just limited to estimation of IP portfolio7. It facilitates the IP issue discussion,
spreading awareness, IP alignment and related activities across the institutes. The limited approach to
IP portfolio value is not a good evaluation process. Evaluation process facilitates the strategy, policy
and IP related activities with the objectives and working of the institute’s R&D unit. Evaluation is an
elaborated and inclusive process. It entails management and control of invention and innovation in
the institute; the interaction and functioning of units like finance, accounts, management and policy;
evaluation of research methods and challenges involved; case studies and field research relationship
Income-based approaches regards the future benefit which IP can generate. Hence, the
benefits are the IP value. Assertion of economic benefits attributed to the IP are essential.
Factors like time, life and risks which an IP entail, dictates this valuation method. There are certain
principles like relief-from-royalty method (royalty savings method), premium profits method,
(incremental income method), excess earnings method which are seen in Income-based approach.
In addition to this, there are a few non-monetary methods which serve as a guide for value of IP asset
by way of observation and scoring different factors relating to IP. These factors are also referred as
value indicators which influence the value of IP either in incremental way or in a negative direction.
Background of IP, legal factor, technological development and market utility with management
capacities are inclusive elements in these factors.
Thus, the IP life cycle does not only entail the idea or innovation but a whole complex but
intricate procedure which governs the processes related to technology to bring it in the market for
commercialization. The processes like IP audit and due diligence, evaluation, and IP valuation are
essence of the IP commercialized and the revenue generated is dictated by application of these
procedures. It is expected that the institutes should implement these processes with utmost care and
should keep a recurring review of such processes. By doing so the institute always make sure that the
processes are updated and implemented timely to reap maximum value of the IP.
3. Research Methodology
The methodology adopted for this study is qualitative and exploratory in nature. The data has been
collected through the institute websites, the departmental records and the annual report published by
the institute. Interviews with the concern authorities were conducted. Exploratory research design
has been used and the qualitative enquiry mode is employed. Conjoint analysis is employed for
calculating the IPR Credence mentioned in Table 1. The whole process is shown by a flow chart
representing the line of work employed during data collection stage (Figure 1). The IP evaluation
process includes listing down of all the IPs and segregating them and then strategically putting data
in the IP audit model which is further analyzed.
which were undertaken in respective years against IPRs generated. In year 2014-15, 53 research
projects were completed and in year 2015-16 and 2016-17, 52 research projects were completed
respectively. Also, the patent generated by the academic unit in year 2014-15 is 7 and for year 2015-16
is 2. Copyright generation in the form of articles published in journals, conference papers was done.
Patent 03
Copyright 01
Industrial Design 02
Trademark 1.5
Layout Design of IC 02
Geographical Indication 1.5
Plant variety and Farmer’s right 03
Trade secret 00
The IPR score of each year is calculated by the above mentioned IPR credence. The data was collected
regarding each academic year and was accordingly segregated and put in the IPR credence. In academic
year 2016-2017, the copyright output is 70 and in academic year 2015-2016 the copyright output was
same as 70, patent output was 2 and the technology transferred was 1. Similarly, in academic year
2014-2015 the copyright output was 55, the patent output was 7 and the technology transferred was 1.
Therefore, the IPR score for academic year 2016-2017 is 70 + (3x0) = 70; for 2015-2016 the score is
70 + (3x2) = 76 and for 2014-2015 the IPR score is 55+ (3x7) = 76. The annual score for every year
is shown in the Table 2 below.
The data collected of electrical engineering department generates a consistent IPR score for three
consecutive years (2014-2015, 2015-2016 and 2016-2017). An effective IP evaluation system is the
essence of a strong IP based institution. Where the evaluation system is wide and inclusive the IPs
can be well structured and scrutinized accordingly. The IP evaluation system has some elements
which further the evaluation process in a well formulated fashion as shown in Figure 9. Elements
like IP policy and relevant institute policy evaluation element helps the IP creator to keep a check on
dos and don’ts while doing business. Legal documents like contracts and other agreements should
be diligently drafted and vetted, statutory provisions should be thoroughly read and understood
which can be put into effective use. Also, innovation and inventions should be critically approved to
carry them forward as a product. IP assessment system from time to time helps to keep application
of things at best. Inventory evaluation is also a very crucial part and revenue evaluation including
maintenance cost and commercialization fees are one of the important elements of the IP evaluation
process. Licensing decisions and evaluation of enforcement procedure evaluation help in efficient
The elements of IP evaluation system are strong factors governing the future processes and markets.
The proposed IP evaluation system is applied to the data regarding total number of patents.
By application of this proposed system the author has tried to seek the best possible commercialization
partner based on domain specification. Table 3 below shows the analysis relating to 9 patents
in the three consecutive academic years 2014-2015, 2015-2016 and 2016-2017 respectively.
According to the analysis drawn as per the elements of IP evaluation system the author has tried to
propose a tentative commercialization partner.
Publication Date
SRIC Website)
Current Status
Work Domain
Mentioned on
Patent Name
Patent Type
Application
Industries
Tentative
Inventor
Date (As
Number
A System and
Method for Power
Avinash
Maximizing 27th, Generation Requested
Kumar Sinha; Process General
Power Nov 26/08/2016 1251/Kol/2014 (Non- for
Binoy Kumar patent Electric
Generation 2014 Renewable Examination
Karmakar
from Solar PV Energy Sector)
Array
Low Voltage Electrowetting-
Karabi
Electrowetting On-Dielectric
Biswas;
On Dielectric (Ewod)
Susanta
(Ewod) 17th, Microfluidic Application
Banerjee; Process
Actuation Apr 26/08/2016 466/Kol/2014 Device Awaiting Apple
Shiraz Sohail; patent
Using 2014 (Droplet Examination
Ershad Ali
Nanocom- Manupilation
Mistri; Afzal
posite Thin By Ewod
Khan
Film Technolog)
Real-Time
Indrajit Motion
Chakrabarti; Estimation in
System for Ajoy Kumar Video Signals.
Real-Time Roy; Rohan 30th, Facilitates Application Amazon
Process
Motion Mukherjee; Apr 01/12/2017 484/Kol/2015 Facilitating the Awaiting Recogn-
patent
Estimation in Baishik 2015 Video Coding Examination ition
Video Signals Biswas; Process. (Real
Pranab Kumar Time Video
Dutta Processing
Sector)
Avinash
Smart Socket Kumar Sinha;
11th, Home Energy Requested
and Smart Binoy Kumar Process
Mar 10/11/2017 269/Kol/2015 Management for Honda
Home Energy Karmakar; patent
2015 (Power Sector) Examination
Manager Puja Kumari;
Subir Sen
Ayush
Pandey,
Subhamoy
Mahajan,
Automated
Dhananjay
Bikes Utilizes
I-Bike: Yadav, Adarsh
Process Range Sensors
Autonomous Kosta, Aniket
and 28th for Obstacle
Two- Wheeler Bhushan, Application
Prod- July, 02/02/2018 201631025904 Detection and Wiggle
with Dual Vikas Pandey, Published
uct 2016 Processing
Mode of Shubh
patent Computers
Locomotion Agrawal,
(Transpor-
Aashay Bhise,
tation Sector)
Hrishyank
Shetty & Prof.
Debashish
Chakravarty
Chandan
Chakraborty;
Brushless invention
Yalla
Induction 22nd, relates to
Tirumala Rao; Product Application
Excited 2016 25/05/2018 201631039892 brushless Siemens
Sabyasachi patent published
Synchronous Nov synchronous
Sen Gupta;
Generator generators
Saptarshi
Basak
Publication Date
SRIC Website)
Current Status
Work Domain
Mentioned on
Patent Name
Patent Type
Application
Industries
Tentative
Inventor
Date (As
Number
Sumit Kumar
Hybrid
Chattopa- 26th,
Asymmetrical Not
dhyay; - 2017 - 201731046611 - -
Multilevel published
Chandan Dec
Inverter
Chakraborty
Synchronous
Machines Chandan
With Chakraborty; 22nd,
Not
Embedded Saptarshi - Sep - 20173103372 - -
published
Brushless Basak; Yalla 2017
Synchronous Tirumala Rao
Exciter
A Cnt-Epoxy
a CNT-epoxy
Nanoparticle
nanoparticle
Based Dina Anna
Process th based
Fractional John; Prof. 9 Application
and fractional
Capacitor And Susanta Dec, 15/06/2018 2 01631042210 awaiting Siemens
Product capacitor
A Method Banerjee; Dr. 2016 examination
Patent and a method
For Karabi Biswas
for fabricating
Fabricating
the same
The Same
5. Discussion
The proposed IP evaluation system helped to understand the intricacies about IP especially patent.
Further application of the framework to other types of IP like copyright to extract a value from it
can be explored. The application of framework helped to identify possible representative industry
partner with whom collaboration can be considered in a near future to strengthen the particular
domain. At this stage, the proposed IP evaluation system may be helpful to understand possibility
of any type of technology transfer or collaboration. Further refinement in the framework can be
achieved by applying the framework to various academic units and then to a few micro, small,
medium enterprises (MSMEs). Availability of IP data limits the study however, practical experience
of a researcher and expert opinion play major role to overcome the limitation.
6. Conclusion
Academic institutes serving as knowledge base for the world have a crucial role. It can be established
that a strong IP evaluation system would help to generate and maintain a better IP driven economy.
A structured framework would govern the institutes working in an effective manner considering
all the possible factors. Implementation of the IP evaluation framework diligently and its revision
on a periodic basis for the IPs generated in an institute would probably give better results and help
in decision making with reference to the IPs as well as innovation and potential inventions. The IP
evaluation framework proposed is inclusive and can be explored by relevant stakeholders to get the
benefit from their intellectual capital as well as IPs already in their portfolio.
References
Liu, T.W. & Chin, K.S. (2010). Development of audit system for intellectual property management excellence. Expert
Systems with Applications, 37(6), 4504-4518.
Rastogi, T. (2010). IP Audit: Way to a Healthy Organization.
Weiss, K.D. & Spink, M.N. (2017, June). Intellectual Asset Management-key areas to consider prior to product launch.
In Technology & Engineering Management Conference (TEMSCON), 2017 IEEE (pp. 160-165). IEEE.
Gargate, G. & Jain, K. (2013). A framework to comprehend the position of intellectual property rights in complex
organisational capital. International Journal of Intellectual Property Management, 6(3), 201-216.
Wilson, A.E. & Decarlo, J.J. (2003). The intellectual property (IP) audit: an effective IP asset management tool. Journal
of biomolecular screening, 8(1), 96-99.
Kaldos, P. (2011). IP valuation at research institutes: An essential tool for technology transfer. Hungarian Intellectual
Property Office.
7Søberg, P.V. (2009). Evaluation of IP Portfolios. In 5th Workshop on Visualising, Measuring and Managing Intangibles
and Intellectual Capital, 8-9 October, Dresden, Germany. (pp. 1-11).
Jain, K. & Sharma, V. (2006). Intellectual property management system: An organizational perspective.
Hormiga, E., Batista‐Canino, R.M. & Sánchez‐Medina, A. (2011). The impact of relational capital on the success of new
business start‐ups. Journal of Small Business Management, 49(4), 617-638.
Gouri, G. & Jain, K. (2012, July). Intellectual property audit for efficient intellectual property management of an
organisation. In Technology Management for Emerging Technologies (PICMET), 2012 Proceedings of
PICMET’12: (pp. 894-906). IEEE.
1. Introduction
The appropriability regime comprises of a combination of strategies to protect knowledge and
the return of investments made on R&D and other innovative activities. Formal and informal
mechanisms can provide protection against imitative activities of competing enterprises (OECD
(2005, p. 114). Secrecy, lead-time to market, and complexity of design are examples of informal
appropriation mechanisms. Accordingly, this work aims to analyze and compare the adoption of
informal appropriation mechanisms by innovative firms in the Brazilian manufacturing industry.
For this analysis the firms were grouped by distinct levels of sectoral technological intensity/
appropriability regime and firm size. The research methodology comprises: (i) literature review on
appropriability regime theory; innovative capacity and innovation performance; (ii) documentary
analysis covering current policies designed for strengthening innovative capabilities in manufacturing
sectors in Brazil; (iii) delimitation of research problem, the analytical framework, and the primary
data source – the National Innovation Survey (Pintec), published by the Brazilian Statistical
Office (IBGE); (iv) data gathering and statistical analysis; and (v) discussion of main results and
implications for policymakers, R&D managers and entrepreneurs.
The findings can be summarized as follows: (i) comparative analysis of the informal appropriation
mechanisms adopted by innovative firms in the manufacturing industry in Brazil, classified by their
size and OECD technological intensity level; (ii) discussion of main results according to size of
innovative firms and the technological intensity/strength of appropriability regime of the sectors in
which they operate; (iii) relevant features to be considered by policymakers, R&D managers and
entrepreneurs.
This article is organized in five sections, including this introduction. The second section presents
the theoretical framework encompassing the appropriability regime theory; external environmental
conditions and innovation performance; and technological classifications, with special emphasis
on the taxonomy of sectoral technological intensity proposed by the Organization for Economic
Cooperation and Development (2011). Afterward, the third section entails methodological approach
and analyses the Pintec 2014 database for Brazilian manufacturing sectors, covering the period from
2012 to 2014. The next section presents and discuss the descriptive statistical results concerning the
four groups of innovative firms in the Brazilian manufacturing that are object of the empirical study.
In the last section, we present the conclusions, implications drawn from the results and suggestions
for future research.
2. Theoretical Background
The theoretical background covers the following topics: (i) appropriability regime theory; (ii) and
(iii) technological classifications, highlighting the classification of sectoral technological intensity
proposed by the Organization for Economic Cooperation and Development (Hatzichronoglou, 1997;
OECD, 2011).
the manufacturing sector. He concluded that lead time is generally considered as the most effective
means of appropriability for process innovations. In turn, superior sales and service efforts are
considered as the most effective means for product innovations, followed by lead time. Patents
are generally considered to be the least effective means of appropriability for both product and
process innovations. Patents as a means of appropriability in the Swiss context are only effective
in a few industries, such as chemicals, including drugs, and in some cases in the machinery and
electrotechnics sectors.
Pisano (2006) re-examined the central concept of appropriability from the perspective of further
developments in the market and academic contexts. The strategies adopted by firms that have
successfully earned from their innovative activities, according to Pisano broadened the understanding
of the impact of intellectual property protection on the rate and direction of innovation.
Hurmelinna-Laukkanen and Puumalainen (2007) categorized the appropriability regime by
combining and complementing previous research. Empirical information from Finnish industry
could be evidenced from data collected among 299 companies to determine the roles, availability,
strength, and efficiency of appropriability mechanisms. Although limited to Finnish industrial
context, the authors suggested a conceptual elucidation of the appropriability regime, and offer
empirical evidence to clarify the understanding of the appropriation of returns on innovation.
Hurmelinna-Laukkanen et al. (2008) examined appropriating from radical and incremental
innovations. Assuming that many significant differences exist between the two innovation categories,
they provide empirical evidence by analyzing survey data collected among 299 Finnish firms. As
a result, they could demonstrate the effects of business dynamism and research and development
(R&D) intensity on radical and incremental innovation. They also reinforced the role of the
appropriability regime in increasing the potential to profit from radical and incremental innovations.
Hurmelinna-Laukkanen (2009) developed an empirical study based on data from five different-
sized ICT firms situated in the San Francisco Bay Area (USA), by interviewing representatives of
these firms in 2004. The author concluded that the availability and strength of various mechanisms
differ according to the products and processes of different firms. She also highlighted that the firm’s
business model and strategic goals substantially influence the formation of its appropriability regime.
These findings show that studies of appropriability regimes and individual mechanisms should not
be restricted to the perceived importance of the means of protecting knowledge.
Hall et al. (2012) addressed a fundamental question on the appropriability subject as following: “for
what reasons would a firm with a given innovation that can be protected by formal mechanisms
choose not to rely on such methods to protect an innovation?” The authors reviewed the literature,
encompassing both theoretical and empirical works, to determine which of the theoretical arguments
are supported by the empirical information. As pointed out by Hall et al. (2012, p. 4), the existing
evidence shows that there are enormous differences in the use of IP at the firm-level—differences
that are beyond expected differences in the applicability of IP (especially patents) to firms’
innovations”. They concluded that “the most robust finding is heterogeneity in the use of patents
across industries. Patents play an important role in the pharmaceutical and chemical industry, and
sometimes in the medical instrument industry and parts of the machinery sector. Most firms consider
patents a relatively ineffective means to protecting their inventions. Instead, they favor a range of
different informal protection mechanisms, above all lead time. But companies also regard secrecy as
more effective than patents” (Hall et al. (2012, p. 44).
Olander et al. (2014) used a quantitative sample of 209 Finnish firms to examine how different
formal and informal appropriability mechanisms can be associated to value capture and creation, and
whether these relationships are affected by the strategic goal to reduce imitation of competitors or to
improve safe knowledge sharing to partners. This empirical study contributed to the advance of this
knowledge field by concentrating on focused appropriability mechanisms. The authors corroborated
the findings by Teece (1986) and Hall et al. (2012), confirming that not only a range of mechanisms
can actually be utilized (cf., e.g., Teece, 1986), but that formal and informal mechanisms may have
different kinds of effects on value creation and value capture, especially depending on their strategic
uses (cf. Hall et al., 2012, p.44).
Smit (2014) employed the concept of appropriability regime established by Hurmelinna-Laukkanen
and Puumalainen (2007) to analyze the appropriability strategy of a GPS producer. The study used
secondary data as a source to investigate the appropriation mechanisms and the usefulness of the
appropriability regime framework to explain past events and to foresee and predict future cases of
appropriability strategies.
The work of Spithovena and Teirlincka (2015) is an empirical study that analyzed the determinants
of R&D outsourcing by integrating the influence of internal capabilities, network resources, and
appropriation mechanisms. According to the authors, appropriation encompasses formal and
informal protection mechanisms. Data from the 3rd and 4th European Community Innovation Survey
for Belgium revealed that internal R&D intensity has a strong positive association with R&D
outsourcing intensity. Concerning appropriation mechanisms, they found a positive association with
formal and informal protection mechanisms, but this last mostly through the complexity of design
rather than industrial secrecy.
If the intellectual technical assets of a firm were to be visualized as an iceberg, the visible part refers
to patents and other formal mechanisms. Secrecy, lead-time to market, complexity of design, and
other informal protection methods are the submerged part. Some researchers have argued that from
a social perspective it is better for inventions to be patented, however, the disclosure of patents
also enables competition by imitators once the patent lapses. Such competition may be much more
difficult if the knowledge is kept secret and never disclosed (EUIPO, 2017).
As reviewed in this section, firms use a range of different protection mechanisms— from patents
to lead-time advantage over competitors — by which they appropriate returns on invention and
innovation (Lippman and Rumelt, 1982; Teece, 1986; 2006; Harabi, 1995; Pisano, 2006; Hurmelinna-
Laukkanen and Puumalainen, 2007; Hurmelinna-Laukkanen et al., 2008; Olander et al., 2014; Hall et
al., 2012). Available empirical evidence suggests that firms rely on strategic (informal) mechanisms
much more than on formal ones (patents, trademarks, designs, copyright, and others) and that most
firms do not use any intellectual protection mechanisms (cf. Hall et al., 2012, p. 4).
will adopt the latest version of the OECD classification (OECD, 2011) and the definitions of the 3rd
edition of Oslo Manual, given that the Pintec 2014 questionnaire was based on this edition (OECD,
2005).
3. RESEARCH DESIGN
3.1. Methodology
The research methodology comprises: (i) literature review on appropriability regime theory;
innovative capacity and innovation performance; (ii) documentary analysis concerning the Brazilian
Classification of Economic Activities (CNAE) and the National Innovation Survey (Pintec) 2012-
2014, both published by IBGE; (iii) content analysis to classify the economic activities of the
respondent firms, according to sectoral technological intensity, appropriability regime of the sectors
in which they operate and number of employees; (iv) delimitation of research problem and analytical
framework to request formal access to statistical tabulations of primary data from Pintec 2012-2014;
(v) discussion of main results and implications for policymakers, RD&I managers and entrepreneurs.
Firstly, a literature review covered the main sources of peer-reviewed scientific articles, such as
Web of Science; Scopus; and Science Direct. Additionally, Google Scholar was accessed to
complement the search results. The analysis of current state of research on the central research
theme – appropriation mechanisms in innovative firms – revealed an opportunity to empirically
evidence which informal appropriation mechanisms have been adopted by innovative firms in
the manufacturing industry in Brazil, according to their size (number of employees); the sectoral
technological intensity; and the appropriability regime of the sectors in which they operate. Previous
works based on national innovation surveys (from Brazil or other countries) had not explored this
topic.
Second, documentary analysis concerning the Brazilian Classification of Economic Activities
(CNAE) and the National Innovation Survey 2014 (Pintec 2014) was conducted to classify the
economic activities of the respondent companies, according to the sectoral technological intensity
and the appropriability regime of the sectors in which they operate. As a result, four groups of
respondent firms were defined, namely: (i) high technological intensity and strong appropriability
regime; (ii) high technological intensity and weak appropriability regime; (iii) low technological
intensity and strong appropriability regime; (iv) low technological intensity and weak appropriability
regime.
Third, an empirical study focusing the adoption of informal appropriability mechanisms by
innovative manufacturing firms in Brazil was developed based on data from the National Innovation
Survey 2014 (Pintec 2014). Descriptive statistics was used to examine and compare the adoption of
informal appropriability mechanisms by innovative manufacturing firms in Brazil. The respondent
firms that have implemented innovations from 2012 to 2014 were asked to inform which informal
protection mechanisms they have adopted for protecting product and process innovations (or both),
using a binary response scale.
Taking into account the two criteria – sectoral technological intensity and the strength of
appropriability regime – four groups of the sample firms were obtained. The designated level of
sectoral technology intensity and appropriability regime is showed in Table 1.
Table 1: Manufacturing Industry Classification according to Sectoral Technology
Intensity and Appropriability Regime Strength
Sectoral
Appropriability Appropriability
technology Sector
regime strength score
intensity
Manufacture of pharmaceuticals and medicinal chemicals 0.811321
Stronga
Manufacture of air and spacecraft and related machinery 0.894273
Metallurgy 0.361734
Table 2: Sample Characterization according to Sectoral Technology Intensity and Appropriability Regime Strength
Appropriability
Sectoral technology intensity Firm size Number of firms %
regime % SMEs
Note: Firm size classification, according to Sebrae (2018): small firms: with 99 workers or less;
medium firms: with 100 to 499 workers; large firms: with over 500 workers (Sebrae, 2018).
Dependent variable
Complexity of design COMP Binary 1 if the firm utilized this mechanism during 2012-2014; 0 otherwise.
Industrial secrecy SECR Binary 1 if the firm utilized this mechanism during 2012-2014; 0 otherwise.
Lead-time advantage TIME Binary 1 if the firm utilized this mechanism during 2012-2014; 0 otherwise.
Other informal mechanisms OTHER Binary 1 if the firm utilized this mechanism during 2012-2014; 0 otherwise.
4. Results
This section summarizes descriptive statistics results by comparing sub-samples disaggregated
by sectoral characteristics, as follows: (i) HT/SR group (firms from high-tech sectors with strong
appropriabilty regime); (ii) HT/WR group (firms from high-tech sectors with weak appropriabilty
regime; (iii) LT/SR (firms from low-tech sectors with strong appropriability regime); and (iv) LT/
WR group (firms from low-tech sectors with weak appropriability regime).
Tables 5 and 8 refer to the descriptive statistics results addressed to the research questions formulated
in the second section of this work.
Table 5: Strategic (Informal) Appropriation Mechanisms used by Innovative Firms from High and Medium-high
Technology Manufacturing Sectors with Strong Appropriability Regime in Brazil
Firms that have implemented innovations from 2012-2014
Strategic (informal) appropriation mechanisms used by innovative firms
Firm size
Total Complexity of Lead-time Other informal
Industrial secrecy mechanisms
design advantage
Total 2,962 621 979 548 139
Small 2,033 331 501 287 70
Medium 704 211 351 189 44
Large 225 79 127 72 26
Source: Own elaboration from Pintec 2014 database.
Table 6: Strategic (Informal) Appropriation Mechanisms used by Innovative Firms from High and Medium-high
Technology Manufacturing Sectors with Weak Appropriability Regime in Brazil
Figure 1: Innovative Manufacturing Firms using Informal Mechanisms for Protecting their Innovations Grouped by
Sectoral Technological Intensity/ Appropriability Regime Strength
Note: HT/SR Group (firms from high-tech sectors with strong appropriabilty regime); HT/WR
Group (firms from high-tech sectors with weak appropriabilty regime); LT/SR Group (firms from
low-tech sectors with strong appropriability regime); and (iv) LT/WR Group (firms from low-tech
sectors with weak appropriability regime).
Source: Own elaboration from Pintec 2014 database.
The histograms in Figure 1 express the percentage of firms within each group (HT/SR; HT/WR; LT/
SR; and LT/WR) using one of these mechanisms (complexity of design; industrial secrecy; lead time
to market; and other informal mechanisms). They are addressed to answer the following research
questions: “how sectoral technological intensity and strength of the sectoral appropriability regime
influence the use of informal appropriation mechanisms by innovative manufacturing firms in Brazil
for protecting their innovations? Do the informal appropriation mechanisms differ from one group
to another?”
The graphs from Figure 1 visually show that the most adopted mechanism by all groups of
innovative manufacturing firms is ‘industrial secrecy’, followed by ‘complexity of design’ and
‘lead-time advantage over competitors’. The use of ‘industrial secrecy’ higher than the use of other
informal mechanisms can be explained by several factors: (i) broad range of protectable subject
matter, including inventions that may not qualify for patent protection; (ii) no formal registration
is required; (iii) applies to innovation in the early stages of innovation funnel; (iv) disclosure of
invention not required; (v) may be used in combination with other protection mechanisms to protect
complex innovations; and (vi) unlimited term of protection (cf. EUIPO, 2017).
The histograms in Figure 2 reveal the percentage of innovative manufacturing firms from high-
tech sectors using one of these mechanisms (complexity of design; industrial secrecy; lead time to
market; and other informal mechanisms) for protecting their innovations.
Note: HT/SR group (firms from high-tech sectors with strong appropriabilty regime); and HT/WR
group (firms from high-tech sectors with weak appropriabilty regime).
Note: LT/SR Group (firms from low-tech sectors with strong appropriability regime); and (iv) LT/
WR Group (firms from low-tech sectors with weak appropriability regime).
Source: Own elaboration from Pintec 2014 database.
Now analysing the results related to the two low-tech groups, one can conclude that the strength of
the appropriability regime influence the use of informal mechanisms of protection by innovative
manufacturing firms, and the differences observed between the two groups are quite significant, as
opposed to HT groups (Figure 2).
Here, the mechanism ‘industrial secrecy’ is also the most used, whether by small, medium or large
companies, followed by ‘complexity of design’ in the case of LT/SR group, and ‘lead-time advantage
over competitors’ in the case of LT/WR group. These results are also in line with previous empirical
works reviewed in the second section.
Both Figure 2 and 3 were addressed to answer the following research questions: “In the same group
of sectoral technological intensity (high- or low-tech), how does the strength of the appropriability
regime influence the use of informal mechanisms of protection by innovative manufacturing firms?
which informal mechanisms have been adopted by firms of different sizes (small, medium and large)
in these cases?”
5. Concluding Remarks
Based on empirical evidence from the Pintec 2014 data, the present study has attempted to analyse
how firm size, sectoral technological intensity (using OCDE classification as reference), and strength
of the sectoral appropriability regime influence the use of informal appropriation mechanisms by
innovative firms for protecting their efforts to innovation.
One main result of the empirical analysis is that, regardless of the group in which the innovative
manufacturing firms were classified, the informal appropriation mechanism most adopted is
‘industrial secrecy’, followed by ‘complexity of design’ and ‘lead- advantage over competitors’.
In line with the existing literature, as reviewed in the second section, one main result of the empirical
analysis is that the most adopted mechanism by all groups of innovative manufacturing firms in
Brazil during the period 2012-2014 is ‘industrial secrecy’, followed by ‘complexity of design’ and
‘lead-time advantage over competitors’.
In the HT/SR group the percentage of firms that adopt informal mechanisms in each size class
(small, medium or large) is higher than the observed in the HT/WR group. Another important result
concerning both HT groups is that ‘industrial secrecy’ is the most used, whether by small, medium
or large companies, followed by ‘complexity of design’ and ‘lead-time advantage over competitors’.
From the results related to the two LT groups, one can conclude that the strength of the appropriability
regime influence the use of informal mechanisms of protection by innovative manufacturing firms,
and the differences observed between the two groups are quite significant, contrary to that observed
in the HT groups. The mechanism ‘industrial secrecy’ is also the most used by LT firms, whether by
small, medium or large companies, followed by ‘complexity of design’ in the case of LT/SR group,
and ‘lead-time advantage over competitors’ in the case of LT/WR group.
The understanding of how firm size, technological intensity, and strength of sectoral appropriability
regime influence the adoption of informal appropriation mechanisms by Brazilian manufacturing
firms is chiefly relevant, not only for policy makers but also for managers and academicians engaged
in the field of management of technology and innovation.
This study has achieved its aim and establishes a basis for a more complex future research. However,
as any other, has its limitations. One important limitation is that the Pintec 2014 questionnaire does
not include questions related to the use of formal mechanisms of appropriation (patents, copyrights,
trademarks, and others methods), so the calculation of the strength of the sectoral appropriability
regime here in this work was based only on data on the use of informal mechanisms by innovative
manufacturing sectors. Although the research questions focus the use of informal mechanisms,
it would have been interesting to compare the use of informal and formal mechanisms, as in the
previous work reviewed in the second section.
6. Acknowledgments
The authors gratefully acknowledge the support and collaboration of the Brazilian Institute of
Geography and Statistics (IBGE), by providing the data from the National Innovation Survey (Pintec
2014) concerning sectoral technological intensity and informal appropriation mechanisms adopted
by innovative manufacturing firms from 2012 to 2014.
References
Abdala, A., Torres-Freireb, C.E., and Callil, V., (2013), Rethinking sectoral typologies: a classification of activity
according to KNOWLEDGE AND TECHNOLOGICAL intensity. RAI Revista de Administração e
Inovação, 13, 232-241.
Bönte, W., Keilbach, B., (2005), Concubinage or marriage? Informal and formal cooperations for innovation.
International Journal of industrial Organization, 23 (3), 279–302.
European Union Intellectual Property Office (EUIPO), (2017), Protecting innovation through trade secrets and patents:
determinants for European Union firms. Alicante (Spain): EUIPO.
Hall, B.H., Helmers, C., Rogers, M., and Sena, V., (2012). The choice between formal and informal intellectual property:
a literature review. NBER Working Paper Series, WP 17983.
Harabi, N., (1995), Appropriability of technical innovations: an empirical analysis. Research Policy, 24, 981-992.
Hatzichronoglou, T. (1997), Revision of the high-technology sector and product classification. OECD Science,
Technology and Industry Working Papers. Working paper nº 1997/02.
Hurmelinna, P.; Kylaheiko, K.; and Jauhiainen, T., (2007), The Janus face of the appropriability regime in the protection
of innovations: theoretical re-appraisal and empirical analysis. Technovation, 27, 133–144.
Hurmelinna-Laukkanen, P., (2009), The availability, strength and efficiency of appropriability mechanisms-protecting
investments in knowledge creation, International Journal of Innovation Management, 45, 282–290.
Hurmelinna-Laukkanen, P., Puumalainen, K., (2007), Nature and dynamics of appropriability: strategies for appropriating
returns on innovation. R&D Management, 37(2), 95-112.
Hurmelinna-Laukkanen, P., Sainio, L. M., and Jauhiainen, T., (2008), Appropriability regime for radical and incremental
innovations. R&D Management, 38(3), 278-289.
Instituto Brasileiro de Geografia e Estatística. IBGE, (2007), Classificação Nacional de Atividades Econômicas - CNAE:
versão 2.0. Rio de Janeiro: IBGE.
Instituto Brasileiro de Geografia e Estatística. IBGE, (2016), Pesquisa de Inovação. Pintec 2014. Rio de Janeiro: IBGE.
Lhuillery, S., Pfister, E., (2009), R&D cooperation and failures in innovation projects: empirical evidence from French
CIS data. Research Policy, 38 (1), 45–57.
Lippman, S.A., Rumelt, R.P., (1982), Uncertain imitability: an analysis of interfirm differences in efficiency under
competition. The Bell Journal of Economics, 13 (2), 418-438.
Olander, H., Hurmelinna-Laukkanen, P., and Vanhala, M., (2014), Mission: possible but sensitive — knowledge
protection mechanisms serving different purposes, International Journal of Innovation Management, 18 (6),
1-24.
Organisation for Economic Co-Operation and Development. OECD, (2005), Oslo Manual: guidelines for collecting and
interpreting innovation data, 3rd Edition. OECD Publishing, Paris, 2005.
Organisation for Economic Co-Operation and Development. OECD, (2011), ISIC Rev. 3 Technology intensity
definition. OECD Directorate for Science, Technology and Industry.
Pisano, G., (2006), Profiting from innovation and the intellectual property revolution. Research Policy 35, 1122–1130.
Sebrae. Micro, small, and medium enterprises, 2018, <http://www.sebrae.com.br/>.
Seo, H., Chung, Y., and Yoon, H., (2017), R&D cooperation and unintended innovation performance: role of
appropriability regimes and sectoral characteristics. Technovation, 66–67, 28–42.
Smit, T., (2014), The appropriability regime as a tool to measure knowledge protection. In 3rd International Business
Administration Bachelor Thesis Conference, July 3, 2014, University of Twente, Faculty of Management
and Governance, Enschede, The Netherlands.
Spithovena, A., Teirlincka, P., (2015), Internal capabilities, network resources and appropriation mechanisms as
determinants of R&D outsourcing. Research Policy, 44, 711–725.
Teece, D. J., (2006), Reflections on ‘Profiting from Innovation’. Research Policy, 35, 1131–1146.
Teece, D.J., (1986), Profiting from technological innovation. Research Policy, 15 (6), 285–305.
Veugelers, R., Cassiman, B., (2005), R&D cooperation between firms and universities. Some empirical evidence from
Belgian manufacturing. International Journal of industrial Organization, 23 (5), 355–379.
Winter, S. G., (2006), The logic of appropriability: from Schumpeter to Arrow to Teece, LEM Working Paper Series,
No. 2006/21, Scuola Superiore Sant’Anna, Laboratory of Economics and Management (LEM), Pisa.
Thyagaraju P.H.
Uranium Extraction Division, Bhabha Atomic Research Centre
E-mail: thyaguph@barc.gov.in
Kirankumar S. Momaya
Shailesh J. Mehta School of Management, IIT Bombay
Email: momaya@iitb.ac.in
Abstract
Dr. Homi Jehangir Bhabha, during late 1940s, seeded BARC with a vision of establishing self-sufficiency in nuclear
technology in India. The vision was indeed very ambitious considering the fact that in those days India did not
quite possess the necessary levels of scientific or industrial inputs. Albeit, true to the founder’s vision, BARC
rose to become an outstanding research centre with substantial transfer of nuclear technologies to several units
under Department of Atomic Energy (DAE) for implementing nuclear technologies in sizeable scale. Down the
line, there were several instances of flow of spin-off technologies into industry. Further, BARC had enhanced the
organizational processes such as setting up of ‘Technology Transfer & Coordination Division’ in order to accentuate
the flow of technologies. While BARC has a very satisfactory record of technology development in the areas of
reactors and radioisotope applications, there seems to be a long way ahead to reach the competitiveness of spin-off
technologies of nuclear organizations of advanced countries. This paper is an attempt to appraise this aspect.
Literature is quite limited in this area; still we identified some reports and other artefacts. A conference paper of
R.B. Grover has been a good starter. BARC’s website and annual reports of Department of Atomic Energy gave
voluminous account of technology-transfer activities. The report “Cross-Flow of Technology” by the XII Plan
Working Group of Government of India gave some inputs on analysis on flow of technologies from Indian research
organizations to industry.
We made some quick benchmarking in respect of spin-off technologies of other research organizations. We adopt
a ‘single case study’ to identify key problem in the context of BARC. As an illustrative example, a market survey
report mentions India as a fast-emerging market for Mass Spectrometers being eyed by the global suppliers. While
BARC’s internal customers use as many as 46 numbers of BARC-made mass spectrometers, these seem yet to make
a mark in the commercial domain. This provides a scope for study in this paper.
Root-cause-analysis is attempted on possible reasons for the current position of flow of spin-off technologies.
Technology denial seems to be the major cause from the external environment. Another external cause is related to
competence of the industry in reciprocally receiving the high-end technologies. Internal causes seem to be related to
entrepreneurial ecosystem, collaborative networking, product positioning, etc.
An important proposition by this paper is that, while the techno-managerial processes of BARC seem adequately
suited for the mandated nuclear technologies, altogether different processes may be needed when it comes to
commercialization of spin-off technologies. This idea stems from the fact that the knowledge areas such as
Technology Management, Entrepreneurial Management have emerged relatively recently and are yet to percolate
into hard core research groups in general. All this analysis is attempted here in order to prove useful for enhancing
the flow of BARC’s spin-off technologies into industry.
Keywords: Spin-off Technologies, Technology Transfer, Competitiveness, Nuclear Spin-offs, Techno-managerial
Intervention, Collaborative Strategies
1. Introduction
“Science of today is the technology of tomorrow”
—Edward Teller
This quotation (Edward Teller Quotes) is quite relevant for the spin-off technologies from the
science-research centres. In the current era of technological economy, it is desirable that the
IAMOT 2019 | 317
Managing Technology for Inclusive and Sustainable Growth
2. Literature Review
Some historical reports were seen in order to grasp the techno-managerial steps (though not exactly
denoted in these terms) taken by Bhabha and his colleagues in acquiring, absorbing and nurturing
the technological skills in establishing the nuclear research centre. The reports reveal interesting
facts that BARC (then called as Atomic Energy Establishment Trombay-AEET) was able to
indigenously extract & refine uranium and further fabricate, the nuclear fuel for the first time, for
use in the research-reactor called CIRUS (Canada India Reactor United States). All this work was
begun and accomplished during the same time while the reactor was under construction from 1956
to 1960. Interestingly, Indian fuel had much better metallurgical properties than Canadian fuel.
The reports also talk about the transfer of BARC’s research output for larger scale facilities of
nuclear technologies such as nuclear fuel complex, heavy water plants, nuclear power plants and
so on. Most of the reports of BARC are for internal circulation. Hence these have not been listed
among the references of this paper. The book Atomic Energy in India, 50 Years (Sundaram, 1998)
is a publication that gave a picture of technological growth of the department, particularly in the
early years.
While India has been an early mover in the nuclear technologies among Asian countries, in
comparison with US, Canada and UK, India has been a technology-follower. The websites and some
reports on public domain, of nuclear departments of US and Canada gave some idea about their
techno-managerial processes.
Commercialization drive of Federal research centres of the US were found to have intensified during
and after 1980. The Bayh-Dole Act of 1980 and other legislations of USA (Marina Lamm, 2010)
gave an idea about the changes in norms that intensified technology transitions in the recent decades.
Both USA and Canada stated in their official literature that the prominent objective of their nuclear
establishments is to raise commercial competitiveness of their countries. Literature of nuclear
establishments of France and Germany too echoed similar objectives.
Annual Reports for last several years of Department of Atomic Energy of India were available on
public domain. These gave elaborate details about technology transfer activities, patents, research
collaborations and other useful information. (Report, 2017) gave some statistics in respect of R&D
expenditure in government research centres and in private sector.
Knowledge and technologies created in institutions can flow to industry through multiple pathways
such as collaborative projects, formal technology transfers, technological consultancy, etc. Momaya,
Bhat and Lalwani (2017) developed a conceptual framework and demonstrated its utility by applying
it to context of IITs-the institutes that are trying to enhance the flow of technologies for industrial
competitiveness. They identified the critical role of leadership and innovation to enhance strategic
flexibility of the flow. This and other research papers lent some ideas that could be relevant to BARC
too in enhancement of flow of spin-off technologies.
5. Problem Statement
Out of around 130 spin-offs listed in BARC’s website, around 48 technologies were transferred to
136 entities. The corresponding scores for USA (Report, 2015) are multitude for justifiable reasons.
While BARC has a very satisfactory record of technology development for internal consumption in
the mandated nuclear area (Grover, 2001), there is much scope ahead to reach the level of commercial
competitiveness of spin-off technologies that exists in advanced countries such as USA and Canada.
6. Method of Study
We adapted elements of systematic method of ‘problem structuring’ (e.g. Momaya, Hayashi, Tokuda,
2006; Momaya et al., 2017) to diagnose issues. We start with an appraisal of techno-managerial
journey of BARC. We sent across a questionnaire to some technology transferees, requesting for
information such as their local R&D facility and their market penetration. This had fetched some
lukewarm response. Then, we made a quick benchmarking and we characterized the key problem by
performing root cause analysis. At the end, we recommend certain interventional recommendations
for pilot study.
8. Emerging Findings
Source: Author compiled from data on public domain, such as DAE Annual Report 2014-15 and
US DOE Technology Transfer Report 2015
The transferees were approached with a questionnaire, to query on their business performance in
respect of mass spectrometers. Only one firm, i.e., M/s Autosys had responded positively that they
were building their first system for a customer.
Another case of medical product was with M/s Panacea Medicals, who responded that they were
making moderate business with BARC technology. They further mentioned that a public policy to
secure customers for them would have helped.
The general finding revealed the following points:
●● Biological technologies such as biogas plants & water purifiers and some agricultural
technologies such as mutated seed varieties had made a reasonable dent in the public
●● Instrumentation and industrial technologies seem yet to make a dent in spite of strengths
mentioned in points of 7.1 above.
9. Analysis
Source: Report, “R&D Statistics at a Glance, 2017-18, Dept. of Science & Technology, Govt. of India”, page 7
Some important reasons revealed by root-cause analysis are given in the Figure 2.
11. Conclusion
This study aimed at making an appraisal of the technological processes of DAE in general and BARC
in particular, in order to specifically understand the processes that go into spin-off technologies of
BARC. It emerges that the organization has reasonably effective processes in place for research,
development and deployment of mandated nuclear technologies; however, there is a scope to nurture
the processes for effective commercialization of spin-off technologies. This idea got strengthened
on taking a look at US’ accentuation of commercialization of government R&D in the wake of
legislations such as Bayh-Dole Act of 1980 and subsequent measures taken. A root-cause analysis
diagram has been constructed particularly highlighting internal causes. A review of relatively newly
emerging managerial discipline ‘Technology Management’ encompassing necessary processes at
BARC to generate options is a recommendation evolved by this paper.
12. Acknowledgements
Thyagaraju would like to thank Prof. R.B. Grover, his PhD guide for intimate mentorship and he
would like to thank Prof. Karuna Jain, his PhD co-guide for support and encouragement. He would
like to thank Shri M.L. Sahu, Head, UED/BARC and Dr. Madangopal Krishnan, Associate Director,
Materials Group, BARC for supporting his work. He would like to thank Dr. Srikumar Banerjee,
Chairman of his Doctoral Committee for overall guidance and encouragement.
13. References
Dyson Freeman J. (2007), Edward Teller 1908-2003, A biographical memoir, National Academy of Sciences, accessed
fromhttp://www.nasonline.org/publications/biographical-memoirs/memoir-pdfs/teller-edward.pdf
Edward Teller Quotes. Brainy Quote.com, Brainy Media Inc, 2018. https://www.brainyquote.com/quotes/edward_
teller_102595, accessed November 29, 2018.
Grover, R.B. [2001], “Technology Management by the Department of Atomic Energy”, Proceedings of National
Seminar on Technology Management, Conducted by Indian Academy of Engineering at National Chemical
Laboratory, Pune, during October 12th -13th, 2001.
Grover, R.B. (2003], Alliances for R&D, Proceedings of International Conference on Management of R&D conducted
by Dept. of Management Studies, IIT Delhi, Pages 305-309
HWB, website of Heavy Water Board, http://www.hwb.gov.in/htmldocs/general/about.asp
Karuna Jain and Rajiv S. Narvekar [2003], Metrics for Measuring Industrial R&D Effectiveness in India, ibid, Pages
447-452]
Livemint (2016), News report: “Nuclear Fuel Complex sets new production record” downloaded from: https://www.
livemint.com/Industry/fUL3BM0JFb7KnQnVdzXbQK/Nuclear-Fuel-Complex-sets-new-production-
record-in-201516.html
Marina Lamm [2010], Patent Attorney, Report “Technology Transfer: United States Policy and Laws” downloaded on 07th
September, 2018 from: https://www.unece.org/fileadmin/DAM/ceci/ppt_presentations/2010/eed/lamm.pdf
Mashelkar R.A. (2001), Five Technology Management Mantras for Indian Industry, Proceedings of National Seminar
on Technology Management, 12th–13th October, 2001, pages 1-2.
Momaya K., Hayashi T. & Tokuda A. (2006), Competitiveness of Japan, International Affairs, 4, 71-93.
Momaya K.S., Yonekura S., Sape T., Tominaga M. (2009), Cooperative Strategies between India and Japan: Glimpse
of opportunities with Focus on ICT Industry, Published in the book Jain K. and Patil R. (Eds.), Decision
Sciences in Global Enterprise Management, MacMillan, New Delhi, pp. 680-693.
Momaya K.S., Bhat S. & Lalwani L. (2017), Institutional growth and industrial competitiveness: Exploring the role
of strategic flexibility taking the case of select institutes in India. Global Journal of Flexible Systems
Management, 18(2), 111-122.
Report (2015), Technology Transfer and Related Technology Partnering Activities at the National Laboratories and
Other Facilities Fiscal Years 2009-2013, downloaded from public domain
Report (2017), Research and Development Statistics at a Glance, Department of Science and Technology, Government
of India, downloaded from public domain.
SINE (2018), Presentation at the Wadhwani Research Centre for Bioengineering Industry Day, Society for Innovation
and Entrepreneurship (SINE), Indian Institute of Technology Bombay.
Sundaram C.V., Krishnan L.V., Iyengar T.S., (1998), Atomic Energy in India-50 years, Mumbai: Department of
Atomic Energy
Thyagaraju P.H., (2017), A study on Technological Up-Gradation of Mass-Spectrometers for achieving Commercial
Viability, as a Case Study with Bhabha Atomic Research Centre, Unpublished Masters Dissertation, Indira
Gandhi National Open University IGNOU, School of Management.
Seungku Ahn
Korea Institute of Science & Technology Evaluation and Planning (KISTEP),
Institute of Innovation Strategy Research, South Korea
E-mail: ask@kistep.re.kr
Juil Kim
Korea Institute of Science & Technology Evaluation and Planning (KISTEP),
Center of R&D Budget Policy, South Korea
E-mail: juil@kistep.re.kr
Abstract
This study analyzed how managerial characteristics affected the performance of technology-based start-ups in
Korea. This study conducted a multiple regression on 248 start-ups that were established on a technology basis.
According to the study, gender, education and career of entrepreneur did not affect the firm performance. The
entrepreneurship does not affect financial performance, but innovativeness and progressiveness have positive effects
on non-financial performance among the sub-factors of entrepreneurship. However, risk-taking has a limited impact
on product competitiveness and non-financial performance of early growth period, and it has a low correlation with
firm performance. These findings suggest the need to foster specialized education for senior CEO, and promote the
entrepreneurship culture of risk-taking.
Keywords: Technology-Based Start-Ups, Entrepreneurship, Managerial Characteristics, Firm Performance
1. Introduction
The importance of technology-based start-ups is emphasized as an alternative to overcome the
problem that the growth formula of industrial society does not work properly. Already, the main
players in the past industrial society have been replaced by technology-based start-ups. Already
in the photographic industry, smartphones and Instagram have replaced Kodak, Airbnb for hotel
and lodging industry, and LinkedIn for manpower market more aggressively than traditional
conglomerates.
The national effort to promote start-ups and to create growth engines is a worldwide phenomenon.
In Korea, technology-based venture businesses such as venture companies have been on the rise
since the 2010s. In 2009, the number of venture companies rose from about 19,000 to more than
34,000 in 2017(Korea Venture Business Association, 2017). At the time of start-up, the average
number of representatives was 1.1, with 93.8% for single start-ups and 6.2% for co-start-ups. These
figures show that entrepreneurs are the most important factors that determine the success of start-
ups. It is because all ideas start from the entrepreneur, the business plan becomes concrete, and
ultimately it takes final responsibility for the entrepreneurial activity. Recognizing the importance
of entrepreneurship earlier, Schumpeter (1934) emphasized the role of entrepreneurs as the subject
of creative destruction.
Since new start-ups have few employees and organizational decision-making systems are not
established, entrepreneurial decision-making has a large impact on the entire company. In this
respect, various characteristics such as entrepreneurial competence, entrepreneurship, and leadership
have a great influence on firm performance. According to a survey by the government, the added
value and employment effect of technological start-ups were superior to those of subsistence start-
ups and small business start-ups. According to the Small and Medium Business Administration
(2015), the average number of technological start-ups in Korea is 4.6, which is higher than that
of 2.0 in retail and 2.7 in lodging and restaurant business. In addition, the average sales amounted
to 800 million won, which is higher than the 560 million won for the food and retail business and
190 million won for the lodging and restaurant business. Based on these evaluations, researches on
ways to maximize the performance of technological start-up companies are being actively carried
out. In particular, entrepreneurship, which provides a driving force for innovative and challenging
technologies, is a very important variable in technology start-up companies, and technological
competence, background knowledge and experience possessed by entrepreneurs can be directly
linked to company’s technology and management performance.
In order to activate technology-based start-ups, many technology-based entrepreneurs must end up
with personal and social conditions that they can start with entrepreneurship. In this sense, it is
necessary to analyze what factors lead the entrepreneur to have a willingness to start a technology and
lead to implementation. Therefore, this study aims to suggest the policy implications of government
support for entrepreneurs by analyzing what characteristics of technology entrepreneurs influence
financial and non-financial performance of technology-based start-ups.
age of managers, but did not verify the impact on performance. In the case of Song and Park (2013),
the results of the venture firms are not significant according to the gender of the representative, but
the age has a positive effect. Yun et al. (2018) confirmed that the gender and age of executives did
not significantly affect business performance. The gender and age of entrepreneurs are the most
basic demographic characteristics, and analysis is needed to find out the possibility of establishing a
differentiated support direction for each type of enterprise.
Second, the prior technical experience means the technical experience and knowledge of the
entrepreneur. Major indicators such as academic background (Shin, 2011; Song and Park, 2013;
Yun et al., 2018), major (Park, 2010), industry experience (Shin, 2011; Kwun and Jeong, 2012;
Yun et al., 2018; McGee and Dowling, 1994; Marino and de Noble, 1997), technical competence
and experience (Yang, 2011; Kim, 2015; McGee and Dowling, 1994; Kazanjian and Rao, 1999)
were analyzed. Among them, the academic achievement of managers is the most closely related to
knowledge level of technology and management. It can be regarded as an important performance
factor for technology-based start-ups who are highly dependent on entrepreneurs’ knowledge (Song
and Park, 2013; Roure and Keeley, 1990). In addition, it is important to identify how the entrepreneur
of a technology-based start-ups has a career prior to start-up, given that the technical career and
training of an entrepreneur have a significant impact on the organization’s problem recognition and
resolution.
Third, entrepreneurship has been analyzed by various researchers after Miller (1983) has
systematized, and generally positive effects on firm performance have been confirmed (Stuart and
Abetti, 1987; Covin and Slavin, 1989; Lee et al., 2001). Entrepreneurship consists of innovativeness,
risk-taking, and progressiveness. The influence of individual components is somewhat different
depending on researchers. Kim (2016) showed that the progressiveness had a positive effect on the
emotional commitment of the members. Park (2010) and Song (2010) analyzed that innovativeness
had positive effects on product competitiveness, financial performance, and technology development
performance. Park et al. (2017) analyzed that manager’s desire for achievement and risk-taking had
a positive effect on managerial performance. However, there is also an analysis that risk-taking may
be negative for financial performance (Song, 2010), and it is suggested that the effect on financial
performance is not significant (Shin, 2010). Based on the above discussion, the following hypotheses
were set about the effect of managerial characteristics on firm performance.
H1:The demographic characteristics of entrepreneurs will affect firm performance.
H2:The technological background of entrepreneurs will affect firm performance.
H3:The entrepreneurship of entrepreneurs will affect firm performance.
As the process of solving the problems faced by the organization (Greiner, 1972), it has been tried
to find out the different required competencies for each stage of the company and to systematically
develop them in relation to the organization life cycle theory (Kazanjian, 1988; Kazanjian and
Drazin, 1990; Yu, 2017). From this point of view, the following hypotheses have been set up in view
of the fact that the influence of managerial characteristics on firm performance depends on the stage
of firm growth.
H4: There will be differences in the effect of entrepreneurs’ demographic characteristics on
firm performance in the stages of growth.
H5: There will be a difference in the effect of entrepreneurial technical background on firm
performance in the stage of growth.
H6: There will be a difference in the effect of entrepreneurship on firm performance in the
stage of growth.
Factors influencing the firm performance by industry may also appear differently. The Small and
Medium Business Administration and the Business Development Agency categorize enterprises
with a business performance of 7 years or less that corresponds to the manufacturing and knowledge
3. Research Method
3.1. Data
This study conducted surveys of technology-based start-ups and obtained data for empirical analysis.
The surveyed companies were limited to companies within 7 years belonging to the manufacturing
and knowledge service industries that are compatible with the technology start-ups defined by the
Small and Medium Business Administration. The detailed list was extracted from the corporate
yearbook produced by the Korea Contents Media (Korea Contents Media, 2016). A total of 441,528
companies in the database were extracted from 71 industries, and a total of 9,134 firms were selected
as surveyed companies. From September 26, 2016 to October 26, 2016, we conducted a survey using
the Internet, mobile, e-mail, etc. to collect a total of 251 responses, which was 2.7%. A total of 248
responses were used for the analysis.
3.2. Variables
▪ decrease in claims
Kaplan and Norton (1992),
customer ▪ increase in re-purchase rate
Khirallah (2000),
performance ▪ increase of regular and new customers
Park (2014)
▪ increased customer satisfaction
goal
goal achievement of firm Kim(2015)
achievement
Park (2010,
Shin(2011),
gender male: 1 / female: 0
Song et al.(2013),
Yun et al.(2018)
Park (2010,
Shin(2011),
CEO age age of entrepreneur Song et al.(2013),
Park et al.(2017),
Yun et al.(2018)
Shin(2011),
education of graduate and above graduates: 1 / under college Song et al.(2013),
entrepreneur graduates: 0 Park et al.(2017),
Yun et al.(2018)
managerial
career of Kim(2015),
characteristics professors, research institutes: 1 / Other: 0
entrepreneur Yun et al.(2018)
4. Empirical Results
▪ employment stability
non-financial organizational Performance ▪ turnover rate 0.86
▪ employee satisfaction 0.92
performance
▪ decrease in claims
▪ increase in re-purchase rate
customer performance 0.95
▪ increase of regular and new customers
▪ Increased customer satisfaction
Division ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪
influencing product competitiveness. This implies that entrepreneurs must take an aggressive
attitude to take risks based on innovative thinking and actions. In addition, this entrepreneur’s effort
leads to accumulation of intellectual property and technical competitiveness, which means that
product competitiveness is formed in the market. Third, the positive factors affecting organizational
performance are entrepreneurs’ innovativeness and progressiveness. Fourth, variables that have
a significant effect on customer performance are age, innovativeness, and progressiveness of
entrepreneurs. Among them, the age of entrepreneurs showed the only negative effect. These
results indicate that the higher the age of entrepreneurs, the more likely it is that they will not
meet their needs. This means that tailored training on market and customer trends is needed for
senior entrepreneurs. Fifth, variables that have a significant effect on goal achievement are age,
innovativeness and progressiveness of entrepreneur. The age of entrepreneurs was identified as a
negative factor in achieving entrepreneurial goals.
In general, entrepreneurial factors in non-financial performance are shown to have a positive effect.
On the other hand, the age of entrepreneurs had a negative impact on customer performance and
goal achievement.
Table 5: Factors Affecting Firm Performance by Entrepreneurs’ Characteristics
Non-financial Performance
Model-1
Variables
Model-2
Model-3 Model-4 Model-5 Model-6
5. Conclusion
This study analyzed the effects of managerial characteristics of technology-based start-up firms on
firm performance such as annual average sales, product competitiveness, organizational performance,
customer performance, and goal achievement. In addition, we examined whether different effects
occur depending on the stage of growth and industry. The results of this analysis suggested the
following policy implications for each factor.
First, among the demographic characteristics of entrepreneurs, gender did not affect firm
performance. However, as the age of the entrepreneur increases, the tendency of the firms to decrease
the performance of the firms has appeared, especially in the establishment period. This phenomenon
suggests the need for a specialized education system for senior entrepreneurs in the start-up process.
Second, the technical background of the entrepreneur did not affect the performance of the start-up
firms. Growth stage and industry did not have a distinct effect on firm performance. This suggests that
it is necessary to seek policy support from other aspects than policy support based on entrepreneurs’
academic background and experience.
Third, entrepreneurship of entrepreneurs does not affect financial performance, but innovativeness
and progressiveness have positive effects on non-financial performance among the sub-factors of
entrepreneurship. Risk-taking has a limited impact on product competitiveness and non-financial
performance of early growth period, and it has a low correlation with firm performance. This implies
that there is a need to more consistently promote policy directions such as the diversification of
recovery methods and the provision of rehabilitation opportunities for sincerity failures in connection
with the government’s proliferation of entrepreneurship and revitalization of rehabilitation. In
addition, it suggests that there is a need to strengthen efforts to improve regulations so that there is
no entrepreneur who cannot start business because of fear of failure.
Fourth, a differentiated support system for entrepreneurs should be established for each stage of
growth. Entrepreneurial progressiveness had a positive effect on the financial and non-financial
performance of the firms during the period of the establishment and the high growth period.
Entrepreneurial innovativeness has a positive effect on the financial and non-financial performance of
firms in the early growth period, and the risk-taking positively affects the non-financial performance
of the early growth firms. It is important to support the linkage at each stage of growth, but it is
difficult to simply go to the next step. In order for the linkage support to be effective, it is necessary
to provide a detailed support system for what kind of support the company has in the previous stage
and which characteristics the company has.
Fifth, by comparing the factors affecting firm performance by industry, it is shown that the risk-
taking of entrepreneurs in manufacturing affects the firm performance (sales) negatively. This
implies that the risk of entrepreneurs who prefer investment plans with high profitability may be
detrimental to the sales growth of the manufacturing industry, which is why it is necessary for the
entrepreneur to make detailed investment decisions.
6. Acknowledgements
This paper is based on the results of “A Study on the Factors Affecting the Performance of the
Technology-based Start-ups (KISTEP Research Report 2017-009)”, some of the contents were
quoted, revised, or supplemented. The contents of this paper are opinions of the authors and do not
relate to the official views of the Korea Institute of Science and Technology Evaluation and Planning
(KISTEP).
References
Butchart, R. L., (1987), A New UK Definition of the High Technology Industries, Economics Trends, 400, 82-88.
Cooper, A. C. (1971), The Founding of Technologically-based Firms, Milwaukee: The Center for Venture Management.
Covin, J. G., and Slevin, D. P., (1989), Strategic Management of Small Firms in Hostile and Benign Environments,
Strategic Management Journal, 10(1), 75-87.
Doutriaux, J., (1992), Emerging High-tech Firms: How Durable are Their Comparative Start-up Advantages, Journal of
Business Venturing, 7(4), 303-322
Greiner, L. E., (1972), Evolution and Revolution as Organization Grow, Harvard Business Review, 50(4), 37-46.
Helms, M. M., Dibrell, C., and Wright, P., (1997), Competitive Strategies and Business Performance: Evidence from the
Adhesives and Sealants Industry, Management Decision, 35(9), 689-703.
Jones-Evans, D., (1995), A Typology of Technology-Based Entrepreneurs: A Model Based on Previous Occupational
Background, International Journal of Entrepreneurial Behavior and Research, 1(1), 1-26.
Kaplan, R. S., and Norton, D. P., (1996), The Balanced Scorecard: Translating Strategy into Action, Boston: Harvard
Business School Press.
Kazanjian, R. K., (1988), Relation of Dominant Problems to Stages of Growth in Technology Based New Firms,
Academy of Management Journal, 31(2), 257-279.
Kazanjian, R. K., and Drazin, R., (1990), A Stage-contingent Model of Design and Growth for Technology Based New
ventures, Journal of Business Venturing, 5(3), 137-150.
Kazanjian, R. K., and Rao, H., (1999), Research Note: The Creation of Capabilities in New Ventures- A Longitudinal
Study, Organizational Study, 20(1), 125-142.
Khirallah, K., (2000), Customer Relation Management: How to Measure Success?, Bank Accounting & Finance, 13(4), 21-28.
Kim, Chun-Keun (2015), Analysis of Factors Influencing the Early Performance of Technology-Based Start-ups, Korea
Polytechnic University Doctoral thesis.
Kim, Hyun Su, (2016), Empirical analysis of the factors for leaping the Valley of Death and the Darwinian Sea: focusing
technology based start-up, Hanyang University Master’s Thesis.
Kohli, A. K., and Jaworski, B. J., (1990), Market Orientation: The Construct, Research, Propositions, and Managerial
Implications, Journal of Marketing, 54(2), 1-18.
Korea Content Media, (2016), Korea SMTp 2017, Seoul.
Korea Business Incubation Association, (2015), Technology-based start-up guide, Daejeon.
Korea Venture Business Association, (2017), Venture Business Status, Seoul.
Kwun, Mi Young and Jeong, Hae Joo, (2012), The Effect of Entrepreneurs’ Characteristic, Technological Capabilities
and Network on Firm Performance of Technology-based Start-ups, Asia-Pacific Journal of Business
Venturing and Entrepreneurship, 7(1), 7-18.
Lee, C., Lee, K., and Pennings, J. M., (2001), Internal Capabilities, External Networks, and Performance: A Study on
Tech. Based Ventures, Strategic Management Journal, 22(6-7), 615-640.
Low, M. B., and MacMillan, I. C., (1988), Entrepreneurship: Past Research and Future Challenges, Journal of
Management, 14(2), 139-161.
Marino, K. E., and de Noble, A. F., (1997), Growth and Early Returns in Technology-based Manufacturing Ventures,
The Journal of High Technology Management Research, 8(2), 225-242.
Maula, M., (2001), Corporate Venture Capital and the Value-Added for Technology-Based New Firm, Doctoral
dissertation, Institute of Strategy and International Business, Helsinki University of Technology, Espoo.
McGee, J. E., and Dowling, M. J., (1994), Using R&D Cooperative Arrangements to Leverage Managerial Experience:
A Study of Technology-intensive New Ventures, Journal of Business Venturing, 9(1), 33-48.
Park, Kil-Hoo and Cho, Jun-Hee(2017), The Effect of Small Medium Sized Firm’s Entrepreneurship on Management
Performance, Journal of the Korean Entrepreneurship Society, 12(1), 16-34.
Park, Soon-gyu, (2014), The Effects of the perceived usefulness of government SME R&D support Policy on the
Technology Innovation System, Kyungil University Doctoral‘ thesis.
Park, Sung Ju, (2010), A study on determinants of the performance of technology venture, Chung-Ang University
Master’s Thesis.
Phillips, P. A. (1996), Strategic Planning and Business Performance in the Quoted UK Hotel Sector: Results of an
Exploratory Study, International Journal of Hospitality Management, 15(4), 347-362.
Robinson, R. B. Jr., and Pearce, J. A., (1986), Product Life-Cycle Considerations and the Nature of Strategic Activities
in Entrepreneurial Firms, Journal of Business Venturing, 1(2), 207-224.
Romanelli, E., (1989), Environments and Strategies of Organization Start-up: Effects on Early Survival, Administrative
Science Quarterly, 34(3), 369-387.
Roure, J. B., and Keeley, R. H., (1990), Predictors of Success in New Technology Based Ventures, Journal of Business
Venturing, 5(4), 201-220.
Roure, J. B., and Maidique, M. A., (1986), Linking Pre-funding Factors and High Tech Ventures Success: An Exploratory
Study, Journal of Business Venturing, 1(3), 295-306.
Sandberg, W. R., and Hofer, C. W., (1987), Improving New Venture Performance: The Role of Strategy, Industry
Structure, and the Entrepreneur, Journal of Business Venturing, 2(1), 5-28.
Schumpeter, J. A., (1934), Capitalism, Socialism, and Democracy, New York: Harper & Row.
Shin, Yongil, (2011), Effects of Technology Based Entrepreneur’s Characteristics on Business Performance, Hanbat
National University Master’s Thesis.
Small and Medium Business Administration, (2015), Survey of the status of start-up companies (press release).
Small and Medium Business Administration, Business Development Agency, (2016), Survey on the Establishment of
Establishment in 2015.
Song, Chiseung and Park, Jaepil , (2013), An Analysis on the Effectiveness of Venture Firms supporting policies in
Korea, Korean Corporation Management Association, 20(5), 215-240.
Song, Jung hyun (2010), A Study on Influential Effects of Learning Motivation and Volition to Entrepreneurship and
Company Performances according to technolgy based Entrepreneur. Chung-Ang University Master’s Thesis.
Steams, T. M., Carter, N. M., Reynolds, P. D., and Williams, M. L., (1995), New Firm Survival: Industry, Strategy, and
Location, Journal of Business Venturing, 10(1), 23-42.
Stuart, R., and Abetti, P. A., (1987), Start-up Ventures: Towards the Prediction of Initial Success, Journal of Business
Venturing, 2(3), 215-230.
Timmons, J., Smollen, L., and Dingee, A., Jr., (1985), New Venture Creation, Homewood, IL: Richard D. Irwin.
Yang, Soo Hee, (2011), The Effects of Entrepreneur’s Competence and Technology Commercialization Capabilities on
Business Performance of Technology based Start-ups, Hanbat National University Master’s Thesis.
Yu, Rae-Hyun (2016), A Study on the Effect of SME CEO’s Competencies on Corporate Performance : Focusing on the
Differential Effects in Growth Stages, Kyonggi University Doctoral Thesis.
Yun, Hyoung-Bo, Kim, Jin-Soo and Lee, IL-Han, (2018), The Effects of Enterprise Characteristics in Technology-based
Startups on Business Performance, Journal of the Korean Entrepreneurship Society, 13(1), 1-27.
Zahra, S. A., (1996), Technology Strategy and New Venture Performance: A Study of Corporate-sponsored and
Independent Biotechnology Ventures, Journal of Business Venture, 11(4), 289-321.
Ni̇han Yildirim
Istanbul Technical University/ Management,
Engineering Department, Turkey
E-mail: yildirimni@itu.edu.tr
Deni̇z Tunçalp
Istanbul Technical University/ Management Engineering,
Department & ITU Teknokent, Turkey
E-mail: tuncalp@itu.edu.tr
Abstract
The digital economy requires strong interaction among its constituents and a co-creation climate so that the
expected socio-economic values are acquired. Within this general framework, there is a need for understanding
the dimensions of digital transformation which can affect or even disrupt, or be driven by from technological
entrepreneurship ecosystems. In the digital transformation era, especially university-based innovation and
entrepreneurship ecosystems are expected to play an essential role in building linkages between researchers,
technology start-ups, idea/ prototype developers and industrial enterprises.
In this context, our study aims to explore the possible roles of science and technology universities for the adaptation
and development of Industry 4.0 technologies for manufacturing industry through their participation in innovation
ecosystems. We also analysed the linkages between these roles and the challenges of adapting Industry 4.0
technologies. After a content analysis in previous literature, in-depth interviews were conducted with 15 experts
from (4 Managers from UIEEs, ten industrial experts working on digital transformation in the manufacturing
industry, two management consultants and three academicians). AHP (Analytical Hierarchical Process) multicriteria
decision-making method and needs analysis by quality function deployment techniques are utilized to combine
pillars of digital transformation pillars (that include (1) challenges and (2) Industry 4.0 tools and technologies
that are applicable to manufacturing industry) with the key roles of Science and Technology Universities which
contributes to technological innovation and entrepreneurship ecosystems. Additionally, with experts we discussed
the potential challenges of Universities for effectively performing their roles in innovation ecosystems for adapting
Industry 4.0 technologies and digital transformation. Finally we proposed a technology policy design framework
that can provide appropriate policy options on embedding university-based innovation and entrepreneurship
ecosystems (UIEE) in digital transformation roadmap for the manufacturing industry in Turkey as a case study for
developing countries to promote sustainable innovation in critical industries.
Keywords: Industry 4.0, Digital Transformation, University-based Entrepreneurship Ecosystems, Triple Helix,
University-industry Collaboration, Digital Convergence, Innovation Networks
1. Introduction
In era of digital disruption that is fuelled by digitalization or by succession of advances in different
domains of the digital infrastructure (Autio, 2017), digital economy is forcing all existing value
chains and ecosystems to converge their processes, structures, business models and cultures for
taking advantage of the technological change in competitiveness and apply effective technology
transfer activities for this. Here, digitalisation can be referred to as “the sociotechnical process
of applying digitising techniques to broader social and institutional contexts that render digital
technologies infrastructural”1 (Tilson, Lyytinen & Sørensen, 2010). A valuable research topic is
exploring the dimensions of digital transformation which can affect or even disrupt, or be driven by
from technological entrepreneurship ecosystems. University-based innovation and entrepreneurship
ecosystems can contribute in building linkages between researchers, technology start-ups,
idea/ prototype developers and industry.
In this study we explore the roles of science and technology universities for transformation
of manufacturing industry by utilizing Industry 4.0 technologies. For this aim, we analysed the
linkages between these roles and the challenges of adapting Industry 4.0 technologies. After a
content analysis in previous literature, data was collected from in-depth interviews with 15 experts
from industry, universities and innovation ecosystem institutions. To rank and compare the Industry
4.0 technologies in terms of their challenges, the possible roles of universities in their adaptation,
AHP (Analytical Hierarchical Process) multicriteria decision-making method and needs analysis
by quality function deployment techniques are applied. Also potential challenges of Universities
are discussed in for their roles in innovation ecosystems for adapting Industry 4.0 technologies
and digital transformation. Finally some concerns about the challenges of universities in effectively
participating in innovation ecosystems are outlined for the policy design framework in digital
transformation roadmap for the manufacturing industry in Turkey as a case study for developing
countries to promote sustainable innovation in critical industries.
2. Literature
When designing policies and enabling systems in technological transformation of developing
countries, some basic constructs should be discussed. These constructs can be listed as the
“content and definitions of the technologies to be adopted”, “the economic and technological
conditions of the adopter countries”, “challenges in the adoption of the technologies in the regional
settings”, “existing options for overcoming the challenges including the triple/ quadruple helix
innovation systems”. Within this mindset, following sections present the literature and theoretical
background on these topics.
2.1.3. Simulation
Currently, 3D simulation of products, materials and production processes is being utilized at the
design stage, but future simulations will become even more widespread in factory operations.
Thanks to these virtual models, which are prepared using real-time data, the virtual reality of the
physical world will be created together with machines, products and people. Operators will test
machine parameters for the following product in the production line in the virtual world before
actually setting the machine parameters and thus, the machine setup time will be shorten and quality
will be increased.
2.1.7. Cloud
Companies are already using cloud-based software for some institutional and analytical applications.
However, in the near future, more data regarding products will need to be shared between the
companies. At the same time, due to the increased performance of cloud technologies, the reaction
time will be reduced to just several milliseconds. As a result of this, the data and functions of the
machines involved in the cloud platforms will increase and more services based on the data will be
provided to the production systems.
as a leading expression of progress and prosperity in many national policy programs and business
strategies (Zuboff, 2015, Dregger et al., 2016).
McKinsey (2015) also presented “digital drivers’ compass” which categorized the technologies by
their impact on “Time to market, Service/ aftersales, Resource/ process, Asset/ utilization, Labor,
Interventories and Quality” dimensions. Deloitte (2015) ranked the advanced manufacturing
technologies and addresses the opportunities and the challenges of digital transformation for the
US case in their study as shown in Figure 1. representing key manufacturing technologies and
the descriptions.
Figure 1: 10 Most Promising Advanced Technologies Transforming the Manufacturing Industry (Deloitte, 2015)
The technologies that act as Tools of Industry 4.0 were categorized by Erbay and Yildirim (2018) as
pillars of analysis in technology selection (Table 1).
Table 1: Industry 4.0 Technologies as Pillars of Technology Selection Analysis (Erbay and Yildirim, 2018).
Tools Description
RFID Radio Frequency Identification: Real time inventory, production level, transparent value chain
Smart Sensor Devices converting physical inputs such as movement, pressure, flow rate, color, light, humidity,
(Data Collection) magnetism, noise into digital outputs.
Robotization Machines using for repetitive, precise and dangerous tasks, collaborates with human.
Production
Computerized systems used in manufacturing, to track and document the transformation of raw
Management
materials to finished goods. Monitoring all production data real time, getting the instant and last minute
Software (MES,
data from machinery, labor and the other entities from the manufacturing environment.
APC, ERP)
Process of examining data sets to extract meaningful information using specialized mathematical
Data Analytics
models.
3D Printing The creation of a 3D printed object is achieved using additive processes without using special fixtures.
VR, AR, Remote Use of computer technology to create a simulated environment, integration of digital information with
Control the user’s environment in real time.
Method converting images and videos into digital outputs using algorithms (pattern recognition
Image Processing
quality control)
Also Semolic (2018) listed some traditional problems that act as challenges to Industry 4.0
technologies adoption like “Lack of adequate technology literacy”, “Lack of holistic and
multidisciplinary approaches to the strategic transformation and change”, “Lack of understanding
on needed and involved professional disciplines (limited communication and understanding
between different professional communities; different terminologies and different subcultures”,
“Lack of collaboration culture between the value chain’s internal and external stakeholders” “Poor
transformational leadership, management, coordination and governance”. These challenges are also
aligned with the findings of Oesterreich and Teuteberg (2016).
Adapted from Oesterreich and Teuteberg (2016), Deloitte (2015) and Mc Kinsey (2016), these
challenges were discussed by Erbay and Yildirim (2018) for automotive supplier industry in Turkey
(Table 3):
Table 3.: List of Industry 4.0 Challenges and Corresponding Descriptions
Challenges Description
Data Security Concerns Abuses by unauthorized accesses on confidential data, know-how. Cyber attacks
Lack of Budget Financing issues of high cost equipment investments, training and consultancy
Lack of Top Mng. Involve Lack of top management support
Lack of expert know-how Lack of expertise persons in terms of I4.0 technologies
Poor Cost-Benefit (ROI) Ratio Unclear and poor ROI calculations
Lack of world-wide approved standards for interoperability and end-to-end seamless
Unclear Standards
communication
Government Support & Promotion Lack of tax and custom exemptions, funding pilot projects
Resistance to Change Organizational challenges in adopting changes (worry to lose their jobs)
High dependency risks on the I4.0
Concerns on high dependency I4.0 providers and losing control over the system
tech. Providers
In this study, by collecting data by Delphi Survey and in-depth interviews with experts and by
using Analytical Hierarchy Process and Quality Function Deployment methods, authors of this study
concluded that the highest challenge is the lack of expert know-how. Overall scores of Challenges of
Industry 4.0 adoption with respect to the technologies are presented in Figure 2. Findings reveal that
Lack of Expert and Know-how, Lack of Budget, Unclear standards and resistance to change stand
as the major challenges.
Figure 2: Overall Scores of the Challenges with Respect to the Tools on QFD Matrix (Erbay and Yıldırım, 2018)
●● While the vast majority of companies indicate a high level of information and interest in
Digital Transformation in the industry, the percentage of companies that think that their
company is ready for transformation is relatively low.
●● According to the results of the research, companies in Turkey are still at the level of pilot
projects in terms of digital transformation
●● It is seen that the competencies of companies in Strategy and Roadmap and Governance
are low.
●● It is observed that the competence levels of the companies do not differ according to the
sectors. On the other hand, large companies (companies with annual revenues of more
than 250 million Turkish lira) have higher digital transformation competence levels
(50/100) than smaller companies (33/100)
●● Companies state that the biggest challenges against digital transformation are the high
investment costs and the uncertainty of return on investment
●● Unlike the developed countries, companies in Turkey are still in pre-investment and
planning period in terms of the obstacles encountered in the digital transformation
journey
●● Technology companies indicate that there is no domestic suppliers, while technology
suppliers indicate that demand is a major problem for companies, indicating that
technology is a disconnect between supply and demand Companies should set the digital
transformation strategy before the investment decisions. Spending limited resources on
investments without strategy contains the risk of wasting resources. For this reason, it is
critical for Turkey to move in accordance with an inclusive road map consisting of three
steps in order to be permanent in this race:
As can clearly be seen from these findings, Turkey and similar developing countries are in need of
building collaborative ecosystems of innovation and technology transfer to overcome the challenges
that are especially related to high investment needs, know-how/expertise gaps and lack of technology
value chains.
constraints and conflicts between actors of innovation. Debackere et al. (2014) defined innovation
eco-system as a” “complex set of relationships among the actors or entities whose functional goal is to
enable technology development and innovation” which includes higher education institutions, public
research organisations, firms, finance sector, public funding agencies, policy-makers and citizens
as its elements. As widely discussed and referred in literature, in 1980’s, as a response to national
innovation systems concept, triple Helix innovation systems that include collaboration and cooperation
of university-industry and government were introduced to sustain notions of entrepreneurship and
innovation to bridge the gaps between actors (Etzkowitz, 1995). In the recent debate, an extension of
the Triple Helix model into a Quadruple Helix model—including civil society besides the industry,
state and academy—has been proposed to overcome the problem of marginalisation in innovation
policies (Carayannis and Campbell, 2009; 2010; Lindberg et al., 2012).
While triple helix innovation model focuses on university-industry-government collaboration
and interaction for promoting innovative technological advancement and entrepreneurship
(Etzkowitz and Leydesdorff, 1995), in the Quadruple Helix model includes NGO’s and civil
society as the fourth actor in the ecosystems (Carayannis and Campbell, 2009). Etzkowitz et al.
(2000) stated that universities act as the engine of social, cultural and economic development
through their knowledge generation and technology transfer activities and by integrating their
process of knowledge creation with its application in industry. In the era of digital transformation,
there is a need for new approaches to transfer of knowledge and technology from universities
to business and industry and to develop a new generation of entrepreneurial innovation leaders
(Bedford et al., 2018). On the other hand, Pertuze et al. (2010) argued that, university-industry
collaborations may produce outcomes like technical/ working papers, process proposals, software
products etc, how ever they generally fail to contribute to productivity or competitiveness of companies.
To catch up with the developed contexts of technology, in developing countries, improving the
absorbtive capacity of local companies became the prior and critical clause in economic growth
policies. Here absorptive capacity can be defined as the ability of a firm to recognise the value of new,
external information, assimilate it and apply it to commercial ends, being critical to its innovative
capabilities (Cohen and Levinthal, 1990). Hence, current agenda of innovation ecosystems prioritize
their supporting activities to enhance absorptive capacity of companies for for digital transformation
and utilization of Industry 4.0 tools today.
Modern Industry 4.0 organisations in regions and countries are searching for new mechanisms
to create favourable business conditions by providing adequate supporting services
(Steyn and Semolic, 2017). Many universities have fostered symbiotic relationships with the
companies in their area and often with the businesses working in the sectors where their academics
specialise. Universities benefit from the use of companies’ cutting-edge facilities to test the practical
applications of their research in real-world situations and the companies benefit by obtaining
up-to-date knowledge from the leading academics in their field (Wilkins, 2018). For example,
in ITU Telecom World forum (2018), one of the main conclusions had been “working across
boundaries, sectors and industries and building multi-stakeholder partnerships as it it the key to
deploying digital infrastructure”. S&T universities can act as key institutions within their innovation
ecosystems by integrating their knowledge creation with application in different industrial fields
(Bedford Et al, 2018). Because of the nature of digital affordances, the modern ‘Digital Economy’ is
very much an interaction economy, where economic and societal value is ‘co-created’ in interactions
among its constituents. This is different from the ‘Manufacturing Economy’ paradigm, where value
is ‘produced’ in a linear and vertical manufacturing process. Although manufacturing continues to be
relevant, the current digital disruption increasingly emphasises a service-dominant logic of horizontal
value co-creation in ecosystem interactions. (Autio, 2017). As Arnold and Voigt (2017) concluded,
most of the manufacturing companies conduct joint development activities with universities and
similar institutions in their efforts to digital transformation and the author recommended manufacturers
should increasingly cooperate with external research institutions, e.g., universities to benefit from a
larger knowledge base, which enables them to quickly and establish targeted and required know-how.
The university is conceptualized as an economic actor and entrepreneurial activities not only of
individual faculty, but of the organization as a whole are encouraged (Krücken et al. (2007).
Salminen et al. (2017) also underlined that universities has an important role in supporting enterprises
by applied research and creation of research and learning environments for continuous piloting of new
technologies and preparation of new business models on Industry 4.0. in regional development context.
When we explore the roles of and impact of leading European S&T universities in innovation
ecosystems, it can be seen that besides being a provider of skilled human capital and knowledge
base, most of the universities act as a leader in technology transfer and incubator of technological
entrepreneurship. As adapted from Bedford et al. (2018) some highlights from EU are shown
in Table 4. Among these universities, there are initiatives towards building sub-ecosystems that
focus on digitization and Industry 4.0 with in broad innovation ecosystems. Also numbers of
collaborations between digital transformation technology providers and universities take place
in particular technologies like the joint project between SKF, Chalmers University and Ericsson
(Bearing.news.com, 2016) and collaboration between Valuechain SW Co and University of
Liverpool on smart factories (University of Liverpool, 2017).
Table 4: European S & T Universities’ Impacts and Roles in Innovation Ecosystems
Krücken et al. (2007) also concluded that discourses about academia and industry ties exhibit both
transnational and national features. However it is important to note that the authors explored the
differences in German and US university-industry innovation networks and they revealed that
the pace of adoption and the specific content of these ties differ strongly by country and culture
(Krücken et al., 2007).
2.5. Methodology
In this study, by using needs analysis and quality function deployment techniques, we matched
pillars of digital transformation pillars (that include Industry 4.0 tools and technologies (1) and their
adoption challenges (2) that are applicable to manufacturing industry) with the two dimensions
(Strengths, Constraints) of university-based innovation and technological entrepreneurship
ecosystems.
For Challenges that are expected to be faced for adaptation of Industry 4.0 Tools in Turkish
Manufacturing Industry, we again adapted a combined list that is derived from the digital
transformation Oesterreich and Teuteberg (2016) and Erbay and Yıldırım (2018). As can be seen
from the table, most of the challenges are overlapping (due to the fact that Erbay and Yildirim
(2018) adapted most of these topics from Oesterreich and Teuteberg (2016)). However as our major
research question is about the possible contributions of university based innovation systems on
Industry 4.0 adoption, “Enhancement of existing communication networks” challenge is added from
the original source to the evaluation in our analysis.
Turkish manufacturing industy setting. Lack of expert know-how and Unclear Standards are other
critical challenges.
Table 7: Challenges of I4.0 Transformation by Technologies and Tools-Needs Analysis Framework
(Adapted from Erbay and Yıldırım (2018))
Challenges of I 4.0 transformation
N umeration of rating (0 to 4) 18,4% 17,7% 17,0% 16,3% 16,3% 14,3% 31%
4: 9
3: 5
27 26 25 24 24 21 147
2: 3
1: 1
Lack of Budget 4 4 4 3 3 3 21 14,3%
Lack of existing communication networks 3 3 3 3 4 3 19 12,9%
Lack of expert know-how 3 2 3 4 3 2 17 11,6%
Unclear Standards 4 2 2 3 3 2 16 10,9%
Resistance to Change 3 3 3 2 3 2 16 10,9%
Poor Cost-Benefit (ROI) Ratio 3 4 3 2 2 2 16 10,9%
High dependency risks on the I4.0 tech. Providers 2 4 2 3 2 2 15 10,2%
Lack of Top Mng. Involve 3 2 3 2 2 2 14 9,5%
Government Support & Promotion 2 2 2 2 2 3 13 8,8%
Simulation Advanced
Autonomous robots
Process Control
Remote Control
Additive
Additive Manufacturing and Autonomous Robotics and AR technologies occur as the mostly
challenged tools of Industry 4.0 in Turkish manufacturing industry setting. Bu when we focus on
the technology/challenge combinations, following challenges were found to be the most important.
●● Lack of Budget in all of Additive Manufacturing, Robotics and Augmented reality
●● Unclear Standards in Additive Manufacturing/3D printing
●● High dependency on technology providers in Robotics
●● Poor ROI in Robotics
●● Lack of Experts and knowhow in Data Analytics and
●● Lack of existing communication networks in IIoT
Due to these findings, policies and action plans are needed to support industry in these challenges.
However, building communication networks of innovation and technological transformation still
may contribute to the solutions that have wide impact in adapting all I4.0 technologies.
Quality Function Deployment (QFD) for matching the Missions of University based Innovation
Networks with the Needs Analysis Results
University based Innovation Networks are among the candidate solutions to overcome the challenges
of I4.0 adoption in manufacturing industries in developing country settings (REF) To validate
their mission allignments with the needs that are presented in previous section as derived from the
findings in Table 6, we constructed a Quality Function Deployment Matrix by matching the Industry
4.0 technologies and related challenges with the “five key messages on the role of S&T universities
in innovation systems” that are adapted from the “Role of Universities of Science and Technology
in Innovation Ecosystems: Towards Mission 3.1” report of Bedford et al., 2018 which was adapted
from European Commission’s and Pascal Lamy’s Report on (2017).
Table 8 presents the dimensions and their sub-topics on the “Role of Universities in Innovation
Systems” that are derived from Bedford et al. (2018).
Table 8: Role of Universities in Innovation Systems
Dimensions - Roles of
Universities sub-topics
a provision of appropriately skilled human capital via teaching (first mission),
Mission-oriented
b advancement of scientific and technical knowledge via academic research (second mission)
1 and innovation
transfer of knowledge and technology from academia to industry and society via technology
leaders c
transfer (third mission).
a collaborating with the actors of their ecosystem
Innovation system b collaborating with the actors of their ecosystem
2
integrators c sponsoring innovation
d sharing resources, knowledge, competences and Research & Industrial Infrastructures
a research commercialisation, entrepreneurship education to students
b academic engagement,
Engines of c support to start-up creation and growth,
3
innovation d funding support,
e entrepreneurship education to students
f creation of entrepreneurial climate within the university
Definition of mindse : attributes need to be strengthened when striving to stimulate
a
Source of innovativeness and entrepreneurship
entrepreneurship b Extra-curricular activities , Incubators
4
and innovation c Centre for entrepreneurship
skills d Incentives for students
e Involvement of stakeholders
a Universities network with other universities and companies
b to exploit opportunities coming from research
Pillars of global
5 c Integrate different knowledge sources
open innovation
d Provide access to a vast range of contacts
e Open the door to international value chains and international impact.
The ratings for the pairwise comparisons of the technologies and the related roles of the universities
in these technologies are collected both from the interview respondents and from the secondary
information /data sources about the 4 Technical Universities (Gebze Technical University, İstanbul
Technical University, Izmir High Technology University and Middle East Technical University)
that are competent in science and engineering disciplines. These universities were selected among
the 10 Research Universities that were identified and selected by Higher Education Council of
Turkey in 2017 for being leaders in science and technologies in Turkey.
Table 9: Turkish S&T Universities’ Impacts and Roles in Innovation Ecosystems
University Impact and role in Innovation EcoSystem
Large scale technology development zone; Fully-integrated incubation centre of early-stage
Istanbul Technical
entrepreneurs who bring science, technology and design together; Center for entrepreneurship and
University (ITU)
innovation, curriculum on entrepreneurship
Pioneers in the incorporation of ODTÜ’s research capacity and know-how with the entrepreneurs’
Middle East Technical innovative qualifications, supports the development of Turkey’s technological infrastructure. have
University (ODTU) a successful technopark; incubation centre, entrepreneurial curriculum and continuously working
towards the development and extension of this model.
Industry Collaboration program, work in collaboration to contribute to the solutions of industry’s
Gebze Technical
problems; conduct value-added R&D projects, ranks 1st in Entrepreneurship index among
University
universities without technoparks
Leading largest technopark in the region, collaboration between the university and the business
Izmir High
firms functioning in the region, ongoing support to research and helping to solve the problems of
Technology Institute
universities and industrial establishments
Leading research university, Incubation center and TTO, Entrepreneurship Research Center for
Koc University*
Industry 4.0
Entrepreneurial reA1:B17search university; Industry 4.0 Excellence Center with Durable Goods
Ozyegin University*
Manufacturers Association, Entrepreneurship Center and Labs for Digital Transformation
Adapting the EU university analysis in Table 3, For S&T technologies in Turkey, these impacts and
roles in innovation ecosystems are derived from universities’ information resources in following
Table 9. In this table, there are two additional universities (indicated with*) which are privately
owned by the foundations of large congromolate holdings in Turkey and have significant activities
in supporting digital transformation ecosystems:
The ratings about the technologies and challenges are evaluated by respondents from the perspective
of Science and Technology Universities. In Turkey, Middle East Technical University and Istanbul
Technical University act as best practitioners of taking role in technological innovation and
entrepreneurship systems by their existing performance in their academic and scientific outputs,
Technology Development Zones, Incubation and Acceleration Centres and their curricula which
support science, technology and innovation competencies of their students. Other selected S&T
universities and private universities in table 8 are very newly established universities. So the
respondents were asked to consider the performances of these 2 universities when answering
the scoring and relevancy questions. The secondary information/ data sources that are utilized in
evaluations are as follows:
●● Patent Databases of Universities, nr of patent applications and granted patents on the
listed Industry 4.0 technologies from academics and partners
●● Statistics about the Alumni of Mechanical, Electronics, Mechatronics, Computer,
Software, İndustrial and Management Engineering–Employed Graduates in companies
and projects that are related to Industry 4.0 technologies
●● Statistics about the Incubated and Accelerated Projects and Entrepreneurs in the
Incubation and Acceleration Centres–Nr of projects and researchers/ entrepreneurs on
Industry 4.0 technologies
●● Statistics about the University-Industry Collaboration Protocols–Collaborations about
Industry 4.0 adoption and transfer of technologies
●● Statistics about the contracted partners–Enterprises, Public Institutions and NGOs
However, it must be noted that limited data is available in the above given statistics. (In further
research, a database which integrates all existing data sources would better be deployed, additionally
a database for collecting such information should be built and integrated with related external
databases of TurkStat (TUİK), Higher Education Council, Universities’ Organizational Units
(Student Affairs, Technology Development Zone Management Companies, Technology Transfer
Offices, Incubation and Acceleration Centres, Entrepreneurship Centres, Industry Collaboration
Offices etc.) Hence expert opinions had been the major source of data for evaluations.
The ratings for the pairwise comparisons of the technologies and the related roles of the universities
in these technologies are collected both from the interview respondents and from the secondary
information/ data sources about the 4 Technical Universities (Gebze Technical University, İstanbul
Technical University, Izmir High Technology University and Middle East Technical University)
that are competent in science and engineering disciplines. These universities were selected among
the 10 Research Universities that were identified and selected by Higher Education Council of
Turkey in 2017 for being leaders in science and technologies in Turkey.
The ratings for the pairwise comparisons (technologies and the related roles of the universities) that
are collected from interview respondents of the in these technologies are given in Table 9.
As can be seen from the table,
●● “Support to start-up creation and growth” and “sponsoring innovation” stands as the
prior roles of the universities in Industry 4.0 technologies and tools support
●● Collaborating with the actor of the ecosystem”, “Advancement of scientific and
technical knowledge via academic research (second mission)” together with “Exploiting
opportunities coming from research”, “Extra-curricular activities, Incubators” and
“Universities network with other universities and companies” remain as the significant
roles of universities.
Simulation Advanced
Autonomous robots
Augmented reality
Process Control
Remote Control
Collection)
Additive
Extra -curri cul a r a cti vi ti es , Incuba tors 3 4 3 2 2 1 15 4,8% Source of entrepreneurship and innovation skills
Uni vers i ti es network wi th other uni vers i ti es a nd compa ni es 3 3 3 4 2 2 17 5,5% Pillars of global open innovation
Expl oi ti ng opportuni ti es comi ng from res ea rch 3 3 3 3 2 1 15 4,8% Pillars of global open innovation
Col l a bora ti ng wi th the fi rms 3 2 2 4 2 2 15 4,8% Innovation system integrators
Invol vement of s ta kehol ders 2 2 2 2 2 2 12 3,9% Source of entrepreneurship and innovation skills
Provi de a cces s to a va s t ra nge of conta cts 2 2 3 2 2 1 12 3,9% Pillars of global open innovation
Provi s i on of a ppropri a tel y s ki l l ed huma n ca pi ta l vi a tea chi ng
2 1 1 3 2 2 11 3,5% Mission-oriented and innovation leaders
(fi rs t mi s s i on),
Sha ri ng res ources , knowl edge, competences a nd Res ea rch &
2 1 1 2 2 2 10 3,2% Innovation system integrators
Indus tri a l Infra s tructures
Tra ns fer of knowl edge a nd technol ogy from a ca demi a to i ndus try
2 1 1 1 2 2 9 2,9% Mission-oriented and innovation leaders
a nd s oci ety vi a technol ogy tra ns fer (thi rd mi s s i on).
Res ea rch commerci a l i s a ti on 2 1 2 1 2 1 9 2,9% Engines of innovation
Aca demi c enga gement 1 1 1 2 1 2 8 2,6% Engines of innovation
Open the door to i nterna ti ona l va l ue cha i ns a nd i nterna ti ona l
1 1 1 2 1 2 8 2,6% Pillars of global open innovation
i mpa ct.
Fundi ng s upport 1 2 1 1 1 1 7 2,3% Engines of innovation
58 58 53 55 46 41 311 100%
19% 19% 17% 18% 15% 13% 100%
Table 11: Roles of S&T Technologies and their Relations with Challenges of Adoption of Industry 4.0 tools
Dimensions -Key Roles of
Sub Topics of Dimensions -Key Roles of Universities (adapted Challenges of Industry 4.0
Universities (adapted from
from Bedford et al., 2018) Technologies Adoption
Bedford et al., 2018)
High dependency risks on the
Engines of innovation Support to start-up creation and growth
I4.0 tech. Providers
Lack of existing communication
Innovation system integrators Sponsoring innovation networks, Lack of Top Mng.
Involve
Lack of existing communication
Innovation system integrators Collaborating with the actors of their ecosystem
networks
Mission-oriented and Advancement of scientific and technical knowledge via
Lack of expert know-how
innovation leaders academic research (second mission)
High dependency risks on the
Source of entrepreneurship
Extra-curricular activities , Incubators I4.0 tech. Providers, Lack of
and innovation skills
Top Mng. Involve
Pillars of global open Lack of existing communication
Universities network with other universities and companies
innovation networks
Pillars of global open
Exploiting opportunities coming from research Lack of expert know-how
innovation
Lack of existing communication
Innovation system integrators Collaborating with the firms
networks
Source of entrepreneurship Lack of existing communication
Involvement of stakeholders
and innovation skills networks
Pillars of global open Lack of existing communication
Provide access to a vast range of contacts
innovation networks
Mission-oriented and Provision of appropriately skilled human capital via teaching
Lack of expert know-how
innovation leaders (first mission),
Sharing resources, knowledge, competences and Research &
Innovation system integrators Lack of Budget
Industrial Infrastructures
ecosystems and by policy makers from academia, regional and national government institutions.
To prevent negative impacts of unbalanced governance and lack of agility of universities,
organizational structures in ecosystems should be regulated by specific administrative regulations
and directives. Funding problems can be solved by the supporting funds from Govermental Bodies
like Science and Technology Councils and European Union funds. Also competition between
consultancy and solution providers and universities should be prevented by introducing processes
and platforms that can enable coopetition (cooperative competition) between these stakeholders.
Nepotism stands as the major concern that require high governance standards in ecosystems of
innovation. For all these challenges, ecosystem designers will be in need of advanced consultancy
services and international collaboration from leaders and best practitioners in innovation ecosystems.
Our study is expected to contribute to the research community by opening a research agenda
for exploring the interrelations between pillars of digital transformation and university-based
innovation ecosystems. We aim to start a discussion for leveraging current entrepreneurship
ecosystems during disruptions in techno-economic environments. The expected outcome is to
contribute to body of knowledge in the management of digital transformation technologies from
a developing country perspective.
References
Arnold, C., Voigt, K., (2017), Ecosystem Effects of the Industrial Internet of Things on Manufacturing Companies.
ACTA INFOLOGICA, 1(2), 99-108.
Autio, E. and Thomas, L.D.W., (2016), Ecosystem value co-creation. In I.C.B. School (Ed.), Working papers, 28, London.
Autio, E., (2017), Digitalisation, Ecosystems, Entrepreneurship and Policy- Perspectives into topical issues in society
and ways to support political decision making, Policy Brief 20/2017, UK.
Bearing.news.com (2016), SKF, Chalmers University and Ericsson will help to lay the practical foundations for
‘Industry 4.0’, while proving the importance of industry-academic collaboration” http://www.bearing-news.
com/cademic-y-industry-4-0-development/ [15 August 2018].
Bedford, T., Kinnaird, Y., Migueis, R., Paolucci, E., Wijlands, B., Vos, A., (2018), Role of Universities of Science
and Technology in Innovation Ecosystems: Towards Mission 3.1, White Paper prepared by Ceasers,
Leuven, Belgium.
Carayannis, E.G. and Campbell, D.F.J., (2009), ‘Mode 3’ and ‘Quadruple Helix’: toward a 21st century fractal innovation
ecosystem. International Journal of Technology Management, 46(3/4), 201–234.
Carayannis E.G., Campbell D.F.J., (2010), Triple Helix, Quadruple Helix and Quintuple Helix and how do knowledge,
innovation and the environment relate to each other? A proposed framework for a transdisciplinary analysis
of sustainable development and social ecology. International Journal of Social Ecology and Sustainable
Development, 1 (1), 41–69.
Chung Lin, K., Shyu, J.Z. and Ding, K., (2017), A Cross-Strait Comparison of Innovation Policy under Industry 4.0 and
Sustainability Development Transition. Sustainability, 2017(9), 786-196.
Cohen, W.M. and D.A. Levinthal (1990), Absorptive capacity: a new perspective of learning and innovation.
Administrative Science Quarterly, 35, 128-152.
Deloitte Development LLC and Council on Competitiveness (2015). Advanced Technologies Initiative Manufacturing
& Innovation, Washington DC: Deloitte Touche Tohmatsu Limited.
Etzkowitz, H., (2008), The Triple Helix: University-Industry-Government Innovation in Action. London: Routledge.
Etzkowitz, H. and Leydesdorff, L. (1995), The Triple Helix--University-Industry- Government Relations: A Laboratory
for Knowledge-Based Economic Development. EASST Review, 14, 14-19.
European Commission and Lamy, P., (2017), LAB–FAB–APP Investing in the European future we want: Report of
the independent High Level Group on maximising the impact of EU Research & Innovation Programmes.
January, 2017, Brussels: European Commission.
Herron, C., Braiden, P.M., (2006), A methodology for developing sustainable quantifiable productivity improvement in
manufacturing companies, International Journal of Production Economics, 104, 143-153.
ITU Telecom World Forum, 2018. Digital innovation ecosystems: the key to Industry 4.0, ITU Telecom World
Conference, 10-13 September, 2018, Durban https://telecomworld.itu.int/2018-daily-highlights-day-3/
digital-innovation-ecosystems-the-key-to-industry-4-0/ (Retrieved at November 2018)
Krücken, G., Meier, F. and Müller, A. (2007), Information, cooperation and the blurring of boundaries–technology
transfer in German and American discourses, Higher Education Journal, 53(6), 675–696.
Lindberg, M., Lindgren M. and Packendorff, J., (2012), Quadruple Helix as a Way to Bridge the Gender Gap in
Entrepreneurship: The Case of an Innovation System, Project in the Baltic Sea Region. Journal of Knowledge
Economics, 2014 (5), 94–113.
Lu, Y. (2017). Industry 4.0: A survey on technologies, applications and open research issues, Journal of Industrial
Information Integration, 6, 1–10.
McKinsey and Company, (2015), Industry 4.0: How to navigate digitization of the manufacturing sector. International:
McKinsey & Company.
Oesterreich, T.D. and Teuteberg F., (2016), Understanding the implications of digitization and automation in the context
of Industry 4.0: A triangulation approach and elements of a research agenda for the construction industry,
Computers in Industry, 83, 121–139.
Ogbor J.O., (2000), Mythicising and reification in entrepreneurial discourse: ideology-critique of entrepreneurial
studies. Journal of Management Studies, 37(5), 605–635.
Perren L., Jennings P.L., (2005), Government discourses on entrepreneurship: issues of legitimization, subjugation and
power. Entrepreneurship Theory and Practice, 29(2), 173–184.
Pertuze, J.A., Calder, E.S., Greitzer, E.M., Lucas, W.A., (2010), Best Practices for University-Industry Collaboration,
MIT Sloan Management Review, 51(4), 82-90.
Ruohomaa, H., Mäntyneva M. and Salminen V., (2017), Renewing a University to Support Smart Manufacturing
Within a Region. In Digital Transformation in Smart Manufacturing, Chapter 8, A Petrillo (ed.). pp.
133-145. IntechOpen: Italy.
Saaty, T., (2008), Decision making with the analytic hierarchy process, International Journal of Services Sciences, 1
(1), 83-98.
Semolic, B. and Steyn, P., (2018), Industry 4.0 Collaborative Research, Innovation and Development (RID) Projects.
PM World Journal, VII (VIII), 1-27.
Salminen V., Ruohomaa H., Koivisto T., (2017), Integrated Service and Product Innovation on Life Cycle Business
Co-evolution. In Advances in Human Factors, Business Management, Training and Education. Advances
in Intelligent Systems and Computing, J Kantola, T Barath, S Nazir, T Andre (eds), vol 498, pp. 301-313,
Springer: Cham.
Sorensen B. M., (2008), Behold, I am making all things new: the entrepreneur as savior in the age of creativity.
Scandinavian Journal of Management, 24(2), 85–93.
TUSIAD & BCG (Boston Consulting Group), (2016), Industry 4.0 in Turkey as an Imperative for Global Competitiveness:
An Emerging Market Perspective, Report nr: TÜSİAD-T/2016-03/576, N Numanoğlu, ME Eynehan, G
Morkoç-Nikelay, E Aksoy (ed.), Istanbul : TÜSİAD.
Türkmen S.Y. (2018) Industry 4.0 and Turkey: A Financial Perspective. In Strategic Design and Innovative Thinking
in Business Operations, Contributions to Management Science, H Dincer, Ü Hacioglu, S Yüksel (eds), pp.
273-291. Springer: Cham.
University of Liverpool, 2017. “Valuechain, a software company that improves business productivity through
digitalisation, are collaborating with the University’s Virtual Engineering Centre, to launch the DNA4.0
Smart Factory, at the Manufacturer Live, in Liverpool this November.” https://www.liverpool.ac.uk/science-
and-engineering/news/articles/collaboration-create-immersive-industry-4-0-experience [15 August 2018].
Wilkins, J., (2018), Working Together in Industry 4.0: How Industry 4.0 is increasing industry collaboration, Automation
Magazine,
https://www.automation.com/automation-news/article/working-together-in-industry-40-how-industry-40-is-increasing-
industry-collaboration [22 November 2018]
Ruchi Sharma
Associate Professor, School of Humanities and Social Sciences,
Indian Institute of Technology Indore, Simrol,
Khandwa Road, Indore M.P. India–453552
E-mail: ruchi@iiti.ac.in
M.D. Danish
Research Associate, School of Humanities and Social Sciences,
Indian Institute of Technology Indore
E-mail: mddanish@iiti.ac.in
Abstract
Patent documents are an important source of knowledge spillovers which can be traced by using patent citations
data. In the current study, we have employed patent citations data for the patents granted to Indian assignee
during year 1990-2001. The study finds that knowledge spillovers are geographically localised and there exist
different patterns of knowledge spillovers between the foreign and domestic firms. The estimated result suggests
that domestic firms are gaining significant knowledge inflows from subsidiary and their parent’s organisation.
Finally, the study claims that firms belongs to same industry class frequently cites patents of its own industry.
Keywords: Patent Citations, Knowledge Spillovers, Geographically Localised, Foreign Firms
1. Introduction
Knowledge spillovers of R&D conducted in a country spread over her trading partners through
international trade and enhance their total factor productivity (Coe, Helpman and Hoffmaister 1997).
Foreign direct investment (FDI) plays an important role in transferring as well as diffusing knowledge
to the host country. Thus, governments around the world continue to spend huge resources to attract
multinational firms (MNCs), at least partly in the hope of gaining knowledge. However, literature
on how foreign direct investment (FDI) contributes to knowledge diffusion still remains fragmented
and inconclusive. Existing literature emphasizes both uni-directional and bi-directional knowledge
flows from foreign MNCs to host country’s domestic firms and vice versa. However, Krugman
(1991, p.53) pointed out that “knowledge flows...are invisible; they leave no paper trail by which
they can be measured and tracked.” This challenge was taken up most prominently by Jaffe et al.
(1993), who argued that knowledge spillovers may well leave a paper trail in the citations to prior
work recorded in a patent. They were pioneers of utilizing the patent citations data as a proxy for
knowledge flows. Following their work, many studies were undertaken that use patent citations as a
proxy of knowledge flows2. Evidently, these studies focus on developed countries except a few that
analyse knowledge spillovers using citation data for China (Yu and Wu 2014).
In Indian context, we undertake the present study to analyse knowledge spillovers from foreign
firms. The present study utilizes patent data from 1990-2001 and focus on the citations made to
foreign firms’ patents by domestic firms utilizing matching approach. We find that foreign firms’
subsidiaries are a major source of transfer as well technology diffusion in Indian context.
1
This paper is part of a project funded by ICSSR under its Research Programme Scheme. We acknowledge with thanks the
financial support of ICSSR for undertaking this study.
2
See for instance, Duguet and Garvie 2007; Singh 2007; Thomson 2005; Audretsch and Feldman 2009; Tijssen 1999; Yu and Wu
2014; Lukach and Plasmans 2002; Alazzawi 2011; Thomson and Fox-kean 2005.
2. Literature Review
MNCs are an important instrument that facilitates global diffusion of knowledge by setting up its
subsidiaries in foreign market. In recent times, several country level studies have been conducted to
gauge technological spillovers from FDI. See, Aitken and Harrison (1999) for Venezuela; Liu and
Wang (2003) for China; Mathiyazhagan (2005) for India; Marin, Sasidharan and Costa (2006) for
Argentina and India; Ng (2006) for East Asian Economies. The empirical evidence on spillovers
from FDI is mixed. Saggi (2002), Maskus (2004), Görg and Greenaway (2004) and Keller (2004)
provide literature surveys on theoretical and empirical issues involved in technological spillovers
from different modes of technology transfers. As covering the extant literature on spillovers from
FDI is outside the scope of this paper, we focus on studies based on patent citations data for capturing
these spillovers.
The use of patent citation data for spillovers analysis is relatively novel though studies have used
patent count as a measure of innovation. As an economic indicator, patent data provide a unique
source of information on industrial innovation (Griliches 1990; Archibugi and Pianta 1996).
It is noteworthy that technology diffuses through foreign patents by dissemination of information
contained in patent applications. Patent citations are the references made to earlier patents in
the document related to new patent. Patent citations data reflect on the spread of knowledge and
has become an alternate empirical approach to study spillovers (Jaffe and Trajtenberg 2002).
According to Jaffe and Trajtenberg (2002, pg. 138), “patents are a proxy for “bits of knowledge”
and patent citations are a proxy for a given bit of knowledge being useful in the development of a
descendant bit.” Patent citations leave behind a trail of the manner in which new innovation builds
upon existing knowledge. Studies by Jaffe and Trajtenberg (2002) and Duguet and MacGarvie
(2002) that compare citation data with inventor surveys show that the correlation between patent
citations and actual knowledge flow though not perfect but indeed is high.
Studies have employed patent citations to measure pure knowledge spillovers. For instance, Jaffe,
Trajtenberg and Henderson (1993), in their seminal work, use citations at the United States Patent
Office (USPTO) to analyse the geographical dimension of spillovers. Further, Jaffe and Trajtenberg
(1999), explore the patterns of citations and find evidence of a diffusion process through geographic,
institutional and technological spaces. Branstetter (2000) evaluates knowledge spillovers between
Japan and the United States by using the similar framework and citation data. Maurseth and
Verspagen (1999) use citations by European patents to study the patterns of knowledge flows between
European regions. Lukach and Plasmans (2002) have analysed the patent citation behaviour of the
Belgian private firms using patent citation data. The study sketched down that the industries with
complex technologies are more open towards inter-industry knowledge flows as against the uniform
technological setup which are found to be more oriented towards the intra-industry knowledge flows.
MacGarvie (2003) explore the technology transfer to French firms through international trade.
Globerman et al. (2000) used data on citations from Swedish patents to study the effect of inward
and outward FDI on Swedish firms’ access to technology. They find that trade and outward FDI are
important channels of knowledge diffusion to Sweden, while inward FDI is not important for both
multinationals and small and medium enterprises. Bascavusoglu (2004) studies patent citation and
its impact on productivity. This analysis is based on 13 developing countries for R&D conducted
in U.S., Japan and 11 European countries for 1982-98. The study provided evidence on the impact
of technology transfers in embodied form (measured by bilateral trade) and disembodied form
(measured by patent citation) on total factor productivity growth. Singh (2004) use citation data
of patents taken by 4400 MNCs and domestic organizations in the US, Japan, Germany, France,
UK and Canada and find that there are significant bi-directional knowledge flows between MNCs
and their host countries, but that MNCs gain more than they contribute. The pattern varies across
countries and sectors, depending on the knowledge-intensity of FDI.
Alazzawi (2011) examines the impact of MNCs over knowledge flows between domestic and foreign
firms. The objective of the study is to determine the role of FDI in knowledge’s diffusion between
“centers of knowledge production” located in different countries. The study has also considered
technological leader as well as follower from different countries. This study has employed data set of
more than 1.8 million patents and 8.7 million citations from 30 different nations over a period of 20
years. The study finds that foreign subsidiary allows domestic firm to collect more knowledge than
what the parent company can receive through other means of communication. Furthermore, overall
knowledge flow increases with FDI and firms involved in same area of research get benefited from
each other’s research.
Evidently most of the studies discussed so far are based in developed countries. Yu and Wu (2014)
have examined the US patent data and analysed how different firms in China gain from knowledge
spillovers. Firm-level patent citations data has been collected from US patent office for 1980 to
2009. The key finding of the study is that MNCs from US, Taiwan and Chinese privately owned
firms performs betters than Chinese State owned enterprises in term of the number of patents and
patent citations.
In view of limited research that focuses on developing countries, in this paper, we focus on India and
knowledge spillovers from foreign companies to domestic firms using patent citation data. India as an
emerging economy is mainly focus of MNCs for its extant market. However, the evidence on gains to
the domestic economy by providing access to its market is rather mixed. We contribute to the existing
literature by exploring patent citation as a channel of knowledge spillovers to domestic firms.
3. Data
Indian Patent office (IPO) maintains the patent data record in India. We are looking for patents
and its citations registered with IPO but unfortunately the citations record is not available at IPO.
A very few patents filed in IPO has citations records of examiners. So, we are using an indirect
way to address the problem. The database used for collection of patents data is PatSeer. We have
verified the authenticity of PatSeer database by comparing it with World Intellectual Property Rights
Organization (WIPO). The details are given in Annexure 1. We have collected data on patents which
are filed by Indian Assignee3 in the foreign patents offices mainly in US, Europe, Japan. The details
of data processing steps are given below.
First, we have collected grant data using Patent assignee as Indian and patents filed in foreign patent
office. We have collected patents granted data for firms only excluding individuals and institutes
due to the focus of study. Further, we exclude patents having zero citation and self-citation. Then we
categorize the remaining patents between foreign and domestic assignee (based on their ownership
group as categorised in Prowess CMIE database). Further, we collected backward citations made
by these patents. In order to ascertain whether the cited patent is used in India we have further
narrowed downed to the backward citations which have family patent in India (FC). Later, we have
constructed the control of FC patents having same technology class and application year. We find
that during 1990-2001 in total 8549 patents were filed from India and 3309 were granted. The details
of these patents are given in Table 1.
Table 1: Classification of patents granted during 1990-2001
Application Patents Granted
year
Firms Government University Individual Hospital Other Total
1990-2001 1647 1213 25 222 02 234 3,309
Share (%) 50 37 0.7 06 0.06 06 100
Among these 3309, patents which have at least one backward citations are only 442, remaining 1205
have zero citation. These 442 patents have made a total of 4982 citations. Out of these 4982 patent
citations only 55 have family patent in India. Following literature, the present study employs case
control matching approach to verify the knowledge spillovers effects. To identify controls, we have
used IPC classification up to finer level (group level) to avoid the over estimation.
3
Location Assignee is defined as the residence of assignee at the time of filing application.
Variables 1 2
Logit Probit
Same Country 1.052** 0.640**
(0.444) (0.263)
mdd -1.712*** -1.009***
(0.511) (0.311)
dd -0.754 -0.451
(0.712) (0.426)
dfi 1.616* 1.032**
(0.935) (0.526)
ffi -0.725 -0.515*
(0.513) (0.312)
Industry Class 1.496** 0.876**
(0.748) (0.432)
Industry sub class 3.439*** 1.838***
(1.226) (0.596)
Primary technology Sub class -3.792*** -2.068***
(1.109) (0.504)
Main group -0.264 -0.152
(0.481) (0.283)
Sub group 0.680 0.414
(0.444) (0.266)
Constant -0.282 -0.151
(0.640) (0.377)
Observations 226 226
Note: The dependent variables are 1, if the citation exists, 0 otherwise. A simple logit and probit regression model is used to
estimate the probability of citing a patent. *** Significant at 1%, ** significant at 5% and * significant at 10%.
Columns 1 and 2 give the estimated results from logit and probit model respectively. Both the
models suggest that variables including same country, mdd, dfi, ffi, Section, Class and Subclass are
significant at different levels.
Patent citations occur frequently within the same country. The estimated result suggests that
Indian domestic firms significantly cite the foreign Indian firms (foreign firms working in India).
The positive coefficient of the variable same country indicates that there exists a positive relationship
between the inventors having same geographic location and the probability of occurring citations
between them. It state that inventors likely to cite a patent whose inventor also resides in same
location which confirm the “localization effect”. The negative coefficient of variable mdd suggests
that there exists a negative relationship between probabilities of occurring a citation between Indian
domestic firms to foreign firms (firm not working in India) which refers that Indian domestic firm
is more likely to cite a patents of firms working in India, rather than foreign firms which are not
working in India. This also claims that geographical proximity matters in knowledge spillovers.
Hence, it can be stated that firms likely to learn more if the firms locate in same geographical location
rather than different location. Similarly, the coefficient of dd is also negative, which suggests that
the probability of citing a domestic patents by domestic firm is negative and insignificant, which
further states that the domestic firms are less likely to cite Indian domestic firms. This negative
relationship states that domestic firms are not technologically advanced whereas the foreign firm
has better technology that diffuses through patent taken in domestic market. The variable dfi clearly
state that the probability of citing a patent by Indian domestic country to foreign Indian is positive
and significant which shows knowledge spillovers from those foreign firms that are working in
India. Finally, the coefficient of variable ffi is negative and insignificant highlighting the relative less
chances of bi-directional flows in case of Indian economy.
The coefficients of technological Industry main class and Industry sub class how a positive relation
between the probability of citing a patent from same Industry class and sub-class. It implies that
patents belong to same broad technological classification is likely to cite frequently the patents
which have the same broad technological classification. However, the group level coefficient
is negative which suggests that the probability of citing a patent which has similar group is not
positively related to group level technological classification. It indicates that there is a chance of
technological overlap at subgroup level as citations occur frequently between the patents sharing
similar broad technological category.
6. Conclusion
On the basis of above discussion, we can conclude that geographic localization exists as inventors
more likely to cite patents from their own location. This is also clear from the above discussion
that the there exists a significant knowledge spillovers from foreign Indian firms to Indian firms.
Foreign firms working in India are contributing significantly through knowledge spillovers providing
a golden opportunity for Indian domestic firms to absorb the new technologies to catch up.
In this paper, we have focused on data from 1990-2001, a time-period when India manufacturing
sector has gone through immense changes following liberalization policies by the government.
Further, the changes in domestic patent policy to comply with international commitments also
influence the patenting behaviour of firms. We will take this work further by considering data from
2001-2016 that will provide us opportunity to also analyse impact of various policy changes.
7. Aknowledgements
This paper is part of a project funded by ICSSR under its Research Programme Scheme.
We acknowledge with thanks the financial support of ICSSR for undertaking this study. We also like
to thanks our project team members, Shruti Aggarwal, Avi Vani, Shweta Sudele and Shaik Baji for
their efforts and cooperation throughout the research.
8. Appendix A
Table A1: Comparison of Patent data between PatSeer and WIPO from 1990-2016
Sources Application Year Granted Year PBC ASNC Total Patent Application Granted
Filed Number Patents
References
Almeida, P. (1999), ‘Knowledge Sourcing by Foreign Multinationals: Patent Citation Analysis in the U.S. Semiconductor
Industry’, in J. Cantwell (ed.), Foreign direct investment and technological change, Cheltenham: Edward
Elgar, pp. 421-31
Aitken, Brian J. and Harrison, Ann E (1999), “Do Domestic Firms Benefit from Direct Foreign Investment? Evidence
from Venezuela.” American Economic Review, 89(3), pp. 605-18.
Audretsch, D.B., Feldman, M.P. (2004), “Knowledge spillovers and the geography of innovation”. In: Henderson, J.V.,
Thisse, J.-F. (Eds.), Handbook of Regional and Urban Economics, vol. 4. Elsevier, Amsterdam, pp. 2713-2739.
AlAzzawi, S. (2011), “Multinational corporations and knowledge flows: evidence from patent citations”, Economic
Development and Cultural Change, 59(3), pp. 649-80.
Bertrand, O. (2009), ‘Effects of foreign acquisitions on R&D activity: Evidence from firm-level data for France’,
Research Policy 38(6), pp. 1021-31.
Branstetter, L. (2000), “Is Foreign Direct Investment a Channel of Knowledge Spillovers? Evidence from Japan’s FDI
in the United States.” NBER Working Paper, No. W8015
Branstetter, L. (2006) “Is Foreign Direct Investment a Channel of Knowledge Spillovers: Evidence from Japan’s FDI in
the United States.” Journal of International Economics, 68: pp. 325-344
Caves, R.E. (1974), “Multinational Firms, Competition and Productivity in Host Country Markets”, Economica,
41(162): pp. 176-193.
Duguet, E., M. MacGarvie. (2005), “How well do patent citations measure knowledge spillovers? Evidence from French
innovative surveys” Economic of Innovation and New technology” New Tech. 14(5)
EPO Worldwide Patent Statistical Database, April 2008
Fischer, Manfred M., Thomas Scherngell and Eva Jansenberger (2009), “Geographic Localisation of Knowledge
Spillovers: Evidence from High-Tech Patent Citations in Europe,” Annals of Regional Science, 43,
pp. 839–858
Grossman, G.M. and E. Helpman (1991), “Trade, Innovation and Growth.” American Economic Review 80 (2):
pp. 86-91.
Hall, B., Jaffe, A. and Trajtenberg, M. (2001) The NBER Patent Citations Data File: Lessons, Insights and Methodological
Tools. NBER Working Paper, No. W8489
Hall, B., Jaffe, A. and Trajtenberg, M. (2001) The NBER Patent Citations Data File: Lessons, Insights and Methodological
Tools. NBER Working Paper, No. W8489
Grossman, G.M. and E. Helpman (1991),“Trade, Innovation and Growth.” American Economic Review 80 (2): 86-91.
Jaffe, A., Trajtenberg, M. and Henderson, R. (1993), “Geographic Localization of Knowledge Spillovers as Evidenced
by Patent Citations” The Quarterly Journal of Economics, 108(3), 577–598
R. Lukach, J. Plasmans, (2002), “Measuring Knowledge Spillovers Using Patent Citations: Evidence from the Belgian
Firm’s Data.” CESifo Working Paper No. 754 Singh, J. 2004. “Multinational Firms and Knowledge
Diffusion: Evidence Using Patent Citation Data,” working paper (2004)
Singh, J. (2007), “Asymmetry of Knowledge Spillovers between MNCs and Host Country Firms.” Journal of
International Business Studies, 38 (4), pp. 764-786.
Tijssen, J.W.R., (2001), “Global and domestic utilization of industrial relevant science: patent citation analysis of
science–technology interactions and knowledge flows.” Research Policy 30(1), pp. 35-54.
Thompson, P., M. Fox-Kean (2005), “Patent citations and the geography of knowledge spillovers: A reassessment.”
American Economic Review
Yu, F. and Wu, Y.(2014), “Patent citations and knowledge spillovers: An analysis of Chinese patents registered in the
USA.” Asian Journal of Technology Innovation, 22(1), pp. 86–99.
Michael Bansmann
Fraunhofer-Institut für Entwurfstechnik Mechatronik IEM
Zukunftsmeile 1, 33102 Paderborn
E-mail: michael.bansmann@iem.fraunhofer.de
Marc Foullois
Fraunhofer-Institut für Entwurfstechnik Mechatronik IEM
Zukunftsmeile 1, 33102 Paderborn
E-mail: marc.foullois@iem.fraunhofer.de
Daniel Röltgen
Fraunhofer-Institut für Entwurfstechnik Mechatronik IEM
Zukunftsmeile 1, 33102 Paderborn
E-mail: daniel.roeltgen@iem.fraunhofer.de
Lars Wöste
Fraunhofer-Institut für Entwurfstechnik Mechatronik IEM
Zukunftsmeile 1, 33102 Paderborn
E-mail: lars.woeste@iem.fraunhofer.de
Roman Dumitrescu
Fraunhofer-Institut für Entwurfstechnik Mechatronik IEM
Zukunftsmeile 1, 33102 Paderborn
E-mail: roman.dumitrescu@iem.fraunhofer.de
Abstract
Introduction and Purpose: Digital technologies have great potential to fundamentally change the way we do
business and work. This is expressed by the term digitized work. The introduction of digital technologies into
working environments can increasingly be observed in practice: The use of data glasses in production, concepts
such as Big Data for the design of powerful PLM systems or intelligent algorithms for decision support are
prominent examples. In this context, we speak of technology-induced scenarios of digitized work. Companies in
the manufacturing industry are increasingly recognizing the associated potential benefits. Due to the multitude, the
heterogeneity and the countless possible combinations of digital technologies, there is an unmanageable variety
of applications within the working environments. Because of this variety, companies are struggling with the
implementation of such scenarios. It is unclear how applications of technology-induced scenarios of digitized work
can be structured and made “tangible”. Without appropriate structuring and classification, a sustainable introduction
of applications of technology-induced scenarios of digitized work and the exploitation of the associated potential
benefits is hardly possible. Therefore, we present a reference architecture and classification of technology induced
scenarios of digitized work.
Methodology: The reference architecture and the classification was derived based on a three-step method. In a
first step, characteristics of technology-induced scenarios of digitized work (e.g. work activity) with corresponding
characteristics (e.g. cognitive) and their interdependencies were identified. In a second step, over 100 examples
of scenarios of digitized work from research and practice were analyzed and classified according to the reference
architecture. Thirdly, this investigation enabled the identification of classes of technology-induced scenarios of
digitized work. This was based on a distribution analysis carried out by a statistics tool.
Findings: The results of applying the described method are a reference architecture and a classification of
technology-induced scenarios of digitized work. The reference architecture consists of five core elements with each
two to four characteristics and their interdependencies. In addition, eight classes of technology induced scenarios of
digitized work were identified based on the empirical study. The classes describe the field of digitized work. Further
results are 100 application-oriented scenarios of digitized work described in detail. In this paper, we present a brief
profile of selected examples.
IAMOT 2019 | 369
Managing Technology for Inclusive and Sustainable Growth
Contributions: The presented reference architecture and the classification of scenarios of digitized work offers
two major potential benefits. On the one hand, the findings are the prerequisite for a comprehensive understanding
of digital change in the working environments. The findings make it possible to structure the topic area of
technology-induced scenarios of digitized work. On the other hand, it offers an orientation guide to companies
in the manufacturing industry and support them to identify their needs for digitization technologies. This reduces
reservations and it is the first step on the way to digitized working environments. Companies must exploit the
associated potentials in order to be able to contribute to the economic growth in a sustainable way. In summary, the
paper contributes to the conference theme of management of technology.
Keywords: Digitized Working Environments, Technology-Induced Scenarios of Digitized Work, Reference
Architecture; Classification
1. Introduction
efficient order processing from the order acceptance to production and logistics. A third prominent
example is predictive maintenance. Such an application enables the prediction of necessary
maintenance based on data analysis procedures on the basis of intelligent condition monitoring of
plants (Selcuk et al., 2016).
The technically possible is pointed out and its effect on the creation of value chains are sketched.
The focus is mainly on production and logistics as well as on engineering. Yet, further areas of the
company are not considered. In particular, neither people nor the organization are considered. An
exception forms the scenario human-technology interaction, which is however not comprehensive
enough and does not do justice to the topic field work 4.0 in its breadth (Bundesministerium Für
Wirtschaft Und Energie, 2016).
The VDMA Industry 4.0 Guideline provides small and medium-sized enterprises with guidance
on the introduction of Industry 4.0 solutions. The toolbox developed for this purpose structures
industry 4.0 solution modules in a total of 12 application levels, each with five development
stages. These focus on the technical aspect, but not on the human and organizational aspects.
Nevertheless, individual elements address the areas of human (human-machine communication)
and organization (company-wide networking with production). Overall, the derivation of the
application levels and their technological basis remain vague (Verband Deutscher Maschinen-
und Anlagenbau, 2015).
The reference architecture model Industry 4.0 presents three basic criteria for the classification of
situations within Industry 4.0. Essential aspects such as life cycle and value chains as well as various
perspectives on the topic are taken into account. However, the applicability and its benefits in
industrial practice remain unclear. In addition, people and organisation are hardly taken into account
in the reference model (Verein Deutscher Ingenieure e.V., 2015).
The modelling approach for a workplace-related description model of the “Working World Industry
4.0” offers a pragmatic and practically applicable approach for the assessment of changes in the
working world due to industry 4.0 application cases. However, the focus is only on the production
environment. In addition, no interpretation aids or recommendations for action are given on the basis
of the evaluated changes. Furthermore, the underlying industry 4.0 application cases are not defined
or structured (Bauer et al., 2018).
The process-oriented potential analysis of industry 4.0 technologies according to Dombrowski
et al. (2018) enables the selection of industry 4.0 technologies on the basis of their benefits
for business processes. The Ishikawa diagram is used to identify the causes of problems.
In addition, criteria for determining the implementation effort are provided. However, the
approach addresses the human and organizational aspects only marginally. Industry 4.0
technologies are also not discussed in detail, so that a structured pre-selection of suitable
technologies is not supported.
It becomes clear that the current state of the art is not sufficient. To support companies in
the structuring of the subject area, the structuring of TSW must enable companies to classify
all scenarios in general. Therefore, the aspired classes of work 4.0 must be general valid for
companies in the manufacturing industry. The specific characteristics of such companies
should be taken into account. During structuring, the potential benefits of TSW are in particular
focus. Moreover, all levels of working environments should be considered (work process, the
company organisation and the embedding of the company in its value creation network). These
perspectives differ fundamentally. It is therefore necessary to consider them independently of
each other.
Five elements form the basis of the reference architecture. These were identified during the analysis
of the similarities of over 100 examples of TSW from research and practice. The examples are
based on the results of the industrial group work 4.0 and the project “IviPep - Work 4.0 in product
development” which is funded by the German Federal Ministry of Education and Research. In
addition, further examples could be found from the activities of the excellence cluster it’s OWL.
Digital Technologies
Communi-
Connectivity Data analysis Virtualization
cation
Actor
Human-
System
System
Work Assignment
Challenge
Situation
The relationships between the elements complete the reference architecture. These are shown
in Figure 1. The work assignment forms the core of the reference architecture. It is executed
by an actor and therefore the assignment has requirements on him. The work assignement
takes place in a situation within the working environement, i.e. the conditions of the working
environement determine the work assignment. Furthermore, the situation has requirements
on the digital technologies used. A further central element of the reference structure is the
challenge underlying the scenario (e.g. inefficient and incorrect assembly activities), which
results from the work task and the situation. The digital technologies address the challenges,
IAMOT 2019 | 373
Managing Technology for Inclusive and Sustainable Growth
at the same time requirements for the digital technologies result from the challenge. Moreover,
the digital technologies support the actor in the execution of his work assignment. This imposes
demands on the actor. The elements are each characterized by two to four characteristics. This
is shown in Figure 2.
The elements and their characteristics are described in more detail below.
2.2. Actor
This element describes the acting object within the TSW. This can be either a cooperation between
human and system (in the sense of digital technologies) or just a system. Such a system usually
consists of several digital technologies (Razzaq et al., 2017).
2.4. Challenge
A mandatory prerequisite for TSW is that a digital technology is used within the working environment
to address a challenge. Therefore it is another central element. The challenges addressed can be
located within the d magic triangle with the dimensions time, costs and quality.
2.5. Situation
The situation describes the level of the working environment in which the TSW can be located. The
characteristics are therefore activity, process, and structure. This refers to the three levels of working
enviroments: 1) work process, 2) the company organisation and 3) the embedding of the company in
its value creation network (Trist, 1981), (Nerdinger et al., 2015).
simulated and processes are analyzed (Röltgen, 2018), (Bansmann, 2018). In particular, project staff
are invited to contribute their implicit knowledge to the planning process. The work assignment can
thus be classified as a cognitive non-routine. Since the focus is on the entire planning process, the
situation within the work environment is assigned to the process level. Before the actual production,
workplaces or structures can easily be reconstructed as cardboard mock-ups. The challenge,
however, lies with the components used to simulate the assembly process. Real prototypes of
these components, which must be available physically for cardboard engineering, are not available
until much later. In addition, up-to-date prototypes are often not available because the design
status changes continuously during development. The challenge under consideration can therefore
primarily be classified as time.
This challenge is now addressed by augmented teality, resulting in a technology-induced scenarios
of digitized work. The cardboard mock-up of the assembly systems and devices is extended by
virtual models, the cardboard mock-up becomes a Mixed Mock-Up. By fading in current 3D design
data into the field of vision of the operators using AR, the design status of the components is always
available and the digital technology used is thus classified as virtualisation. Accordingly, the actor is
classified as a human-system. This scenario combines the advantages of the haptics of the physical
cardboard construction with the flexibility of the digital mock-up. This significantly shortens the
set-up and testing phase (Figure 3).
Digital Technologies
Communi-
Connectivity Data analysis Virtualization
cation
Actor
Human-
System
System
Work assignment
Challenge
Situation
Figure 3: Classification of the Mixed Mock-Up [Sbb+18] [Bh18] Using the Reference Architecture
With the implementation of a graph database, information such as employees, project, product,
components, substances and suppliers can be conveniently linked. This representation in knowledge
networks and access via a proper interface results in a service system for conformity management.
Through queries, the system can evaluate and display critical substances with all associated
information. The digital technology can thus be classified as data analysis. The employee is supported
by the system during the processing of conformity inquiries, which reduces the effort considerably.
The actuator is thus classified as a human-system (Figure 4).
Digital Technologies
Communi- Data
Connectivity Virtualization
cation analysis
Actor
Human-
System
System
Work assignment
Challenge
Situation
Figure 4: Classification of the Service System for Conformity Management Using the Reference Architecture
In a first step, the nominal data set as shown in Figure 5 were dichotomized into binary data. In a
second step, a hierarchical cluster analysis was performed (including the generation of a similarity
matrix). Thereby, as a similarity measure the Jaccard coefficient was chosen, as a cluster method the
average linkage was used. Based on this, classes can be determined using the assignment overview
or the dendrogram. In a third step, a multidimensional scaling was performed. The similarity matrix
from the cluster analysis provides the basis. As a result, the identified classes are visualized as shown
in Figure 6. The following classes could be identified
Class 1 – Digital Supporter: The Digital Supporter class refers to such work 4.0 application scenarios
that support a human actor in performing manual work tasks. The support of non-routine tasks,
however, is also part of this class. The task to be supported and the result to be achieved must be
clearly defined. Technologies from the field of communication or virtualization are used. The support
is provided by haptic feedback, visual support or the involvement of remote experts. A typical field of
application is the production environment. In this class, the element digital technologies is strong in
communication and medium in virtualization. The element actor is pronounced with human system,
the work task is manual routine. As typical examples can be mentioned the application scenarios
of worker guidance in assembly, remote expert for maintenance support, quality control through
gesture recognition or information provision via language assistants. These scenarios usually have a
comparatively high degree of technical maturity.
Class 2 – Digital Man of Action: The Digital Man of Action class describes work 4.0 application
scenarios in which a technical system performs manual work tasks. Explicitly stressful, challenging
or repetitive physical tasks can be performed autonomously. Such systems are particularly suitable for
use in production or logistics. Digital technologies in the field of communication and virtualization
are being used within this class. The actor is a technical system. The manual routine is particularly
addressed within the work task. With this type of work task, automation is much more economical,
so that costs are adressed within the field of challenges. Typical examples are humanoid robots,
drone-based inventory or light-controlled driverless transport systems.
Agile Value
Systems
Intelligent Digital
Processes Processes
Digital Man
of Action Smart
Decider
Agile
Ressource
M anagement
Legend
technology induced scenarios
of digitized work (TSW)
Class of TSW
Digital Smart
Supporter Aide distinguishing characteristics
Class 3 – Smart Aide: This class refers to intelligent assistance systems. These support people in
performing cognitive tasks. Both routine and non-routine tasks are supported, in which, for example,
additional needs-based information is made available via language assistants. Areas of application
are creative and knowledge-based areas such as product development. Digital technologies include
data analysis, communication and virtualisation. The actor is a human system, the work task can
be both the cognitive routine as well as cognitive non-routine. Quality is addressed as a challenge.
Typical examples are “hybrid service bots” to support the processing of service requests, generative
design to support designers or a remote expert to support consulting services.
Class 4 – Smart Decider: The fourth class describes intelligent systems based on machine learning
processes. This gives them reasoning and cognitive abilities. They can judge situations autonomously
and make decisions without human interaction. Thus, the systems can perform cognitive non-
routine tasks. The ability of such systems and the quality of the decisions they make depends on the
underlying algorithms and training data available to them. As a digital technology, data analysis is
pronounced, the actor is a system. Cognitive non-routine tasks are performed, usually to improve
their quality. Typical examples are predictive analytics for automated decision making or AI-based
expert systems for replicating expert knowledge or AI-based monkey testing for software validation.
Class 5 – Digital Processes: While the first four classes refer to the level of the work situation, the
upcoming classes are classified at the level of business processes. This class describes systems that
map simple processes and workflows completely digitally. This avoids media discontinuities. The
main work activities along such processes are manual routine tasks. These are eliminated by the use
of work 4.0 application scenarios of this class. A typical example is the digitalization of business
trip applications based on electronic signatures. Manual routine tasks such as scanning paper-based
signatures are then obsolete. A typical field of application for digital processes is administration.
In this class of digital technologies, the networking is pronounced, the actor is the system. It uses
manual routine tasks to save costs. The situation is the process. Typical examples are a digital order
flow or the digital documentation of a production progress.
Class 6 – Intelligent Processes: The sixth class also refers to work 4.0 application scenarios within the
level of business processes. In contrast to the Digital Processes class, processes based on cognitive
tasks are digitized in this class. Intelligent processes create added value through intelligent data
collection, processing and usage. Two different directions can be distinguished. On the one hand, the
systems that relieve people of cognitive routine tasks in the form of intelligent workflows. Examples
include intelligent representative control (e.g. by e-mail forwarding) or a digital driver’s logbook to
support business trip accounting. Secondly, systems can be distinguished that take over processes
from cognitive non-routine tasks. This can be done completely autonomously or in cooperation with
humans. Examples for autonomous execution are AI for the simulation of empirical knowledge or
the model-based provision of information for multi-project management. Examples of cooperation
between humans and systems are model-based development to support traceability or semi-automated
offer generation in the B2B area. The cooperations are characterized by the fact that information is
captured, processed and visualized along a process. The user can make decisions based on this. In
this class the data analysis is pronounced with the digital technologies. In the element actor both
the human being and a cooperation between human being and system are adressed. The underlying
work activities are cognitive routine as well as cognitive non-routine. The challenge of quality is
addressed. Within the element situation the characteristic process is addressed.
Class 7 – Agile Ressource Management: This class is assigned to the level value-added system and
enterprise environment. It describes such work 4.0 application scenarios that make internal processes
and organizational structures more flexible. A special focus is on the management of internal
resources. A typical example is the self-organized capacity flexibility based on a doodle-system.
Employees can organize their availability independently. Another example is crowdsourcing. For
example, knowledge-based tasks are assigned to HR platforms (e.g. Mturk). This enables companies
to benefit from innovative impulses from external sources. Scenarios of this class are based on
networking. The underlying work activities are usually cognitive routine and non-routine tasks (e.g.
coordination and procurement of human resources). Scenarios of this class address the challenge of
quality within the situation structure.
Class 8 – Agile Value Systems: The eighth class is similar to Agile Resource Management and is
classified at the level of value creation system and corporate environment. The aim of scenarios
of these classes is to make supplier and customer relationships more flexible. An example is the
integration of feedback based on field data into product development. This can support, for example,
adaptation development. In this class, the elements are defined in the same way as in the seventh
class. In contrast to this, the focus here is on embedding the company in its value-added network. In
contrast, the Agile Resource Management class focuses the internal structures.
Potential matrix
Potential j (column)?"
0: i is not similar to j
1: i is similar to j
location and person-related
knowledge
Potentials
Potentials Nr. 7 11 21 22 24 26 1 2 4 5 8 12 13 3 6 10 17 9 25 69 73 55 77 95 70 83
Simplified access to expert knowledge 7 1 1 0 0 0 0 0 1 1 0 1 0 1 1 0 0 0 0 1 1 1 1 1 0 1
Earlier/ cheaper testing of assembly systems 11 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 0 Increasing the
Integration of the knowledge of external experts 21 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 1 0 0 organization's ability
Better customer understanding 22 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0
More flexible work and personnel deployment 24 1 0 1 0 0 0 1 0 0 1 0 0 0 1 0 0 0 0 0 0 0 1 1 0 0
to innovate
Reduction of energy costs 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Improved ergonomics 1 0 0 0 0 1 0 1 1 1 1 1 0 1 1 0 1 0 0 1 0 1 0 0 0 0
The benefit promise was defined for each of the 100 TSW examined. For the Mixed Mock-Up
scenario, for example, the identified benefit potential is “Earlier and more favorable testing of
assembly systems”. The 100 benefit potentials identified in this way were then entered into the
matrix shown in figure 7 and evaluated for similarity in a pairwise comparison. The corresponding
question was “Is the potential i (row) similar to po tential j (column)? In case of similarity, a 1 is
entered in the corresponding cell, otherwise a 0. So for example, the potential “Simplified accedd
to expert knowledge” is similar to the potential “Integration of knowledge of external experts”. The
corresponding cell entry is therefor a “1”. Using a binary design structure matrix, the relationships
between the respective potential benefits were analyzed using the software tool LOOMEO. The
benefit potentials are sorted according to similarity, so that groups with as many “1” as possible are
formed within the matrix. Such a group is called a potential field.
The section of 25 potential benefits shown in Figure 7 illustrates that seven potential fields could be
identified within these potential benefits. When examining the potential fields, it becomes clear that
they can be assigned to the following three generic benefit categories:
assignments is made possible. At the level of business processes and organizational structures, for
example, the potential field of “more efficient use of resources” is classified.
Figure 8: Classification Scheme of the Added Value of Technology Induced Scenarios of Digitized Work
The following three categories form the basis of the classification of the added value of work 4.0:
4.6. Area
The third category is formed by the area. This refers to the distinction between the shopfloor and
office divisions. While the term shopfloor refers to the production environment, the term office
refers to the areas of the company that focus on knowledge-based activities. This distinction is made
because the TSW classes 1-4 have shown the distinction between motoric and cognitive tasks.
The three axes span the cube shown in Figure 8. The eight identified TSW classes can be located in
this cube as follows:
IAMOT 2019 | 380
Reference Architecture and Classification of Technology Induced Scenarios of Digitized Work
Digital Supporter: Such application scenarios support the execution of manual work activities.
Accordingly, the class is to be assigned to the work activity level in the working environment. Since
this class concentrates on manual activities, the class belongs to the shopfloor area. Since the class
supports the execution by haptic feedback, visual support or by involving remote experts, the aim is
usually to increase the efficiency of the supported work activities. Accordingly, the class is assigned
to the Efficiency Enhancement group for the potential benefits. Among other things, the potential
field of „more efficient motoric work activities“ applies to this class.
Digital Man of Action: This class contributes primarily within the level of work situation in terms of
increasing efficiency. Manual work tasks are performed autonomously by systems. Due to the high
degree of automation, related activities can also be carried out, so that benefits can also be created
within the level of business processes. Since manual tasks are the focus of this class, it is assigned to
the shopfloor. The potential field of „more efficient use of resources“ is underpinned by this class.
Smart Aide: Application scenarios of this class support cognitive tasks by providing information
as needed. Thus, both cognitive routine and non-routine tasks can be supported. This increases
efficiency and innovation within the work situation, as the persons involved can concentrate on
value-adding activities and thus increase their creativity. The class is assigned to the officefloor
because cognitive tasks are focused. A typical potential field of this class is the „better availability
of cross-location and person-related knowledge“.
Smart Decider: The class includes application scenarios that perform both cognitive routine and
non-routine tasks autonomously. Corresponding scenarios allow decisions to be made and creative
tasks to be solved. This allows an increase in efficiency and innovation within the work activity level
in the officefloor area. In addition, the level of business processes is addressed, since related work
activities can be performed autonomously by application scenarios of this class. A corresponding
potential field of this class is the „more efficient execution of cognitive work activities“.
IAMOT 2019 | 381
Managing Technology for Inclusive and Sustainable Growth
Digital Processes: Application scenarios that are assigned to this class enable the digital
representation of simple processes. This results in an increase in the efficiency of business processes.
This applies both to the shopfloor and the officefloor. However, the officefloor is more in the focus
of this class, since the typical application area of this class is administration. As an example, the
potential field „more efficient use of resources“ can be assigned to this class.
Intelligent Processes: This class refers to application scenarios that create benefits from the
intelligent collection, processing and use of data. This leads to an increase in efficiency and
innovation within the process level. Shopfloor and officefloor are addressed equally. A typical
potential field which is addressed by this class is the „increase of the innovation capability of
the organization“.
Agile Resource Management: Application scenarios of this class offer innovations for the
management of internal resources. The focus is on making internal processes and structures more
flexible. In the classification scheme, this class is assigned to the level of the value creation, since the
focus is particularly on networking internal resources with the corporate environment. Within this
level, the class promises an increase in the ability to innovate and a flexibilization of structures. This
applies to both the shopfloor and the officefloor. A corresponding potential field is the „reduction of
reaction times“.
IAMOT 2019 | 382
Reference Architecture and Classification of Technology Induced Scenarios of Digitized Work
Agile Value Systems: This class focuses on application scenarios that enable the flexibilization of
supplier and customer relationships. The associated potential benefits relate to the flexibilisation of
structures both within the company (level of business processes and organisational structures) and
within the level of the value creation system. Both the shopfloor and the officefloor are addressed
equally. The potential field „leaner processes and structures by increasing transparency along the
value chain (product data)“ is addressed by this class.
6. Acknowledgements
The results were developed within the project „IviPep - Work 4.0 in product development“. The
joint project is funded by the German Federal Ministry of Education and Research (BMBF) and the
European Social Fund (ESF) as part of the „Future of Work“ programme.
References
Autor, D.H.; Levy, F.; Murnane, R.J. (2003) The Skill Content of Recent Technological Change: An Empirical
Exploration. The Quarterly Journal of Economics, Volume 118, S. 1279-1333
Bansmann, M.; Fechtelpeter, C.; Anacker, H.; Dumitrescu, R. (2018) Transfering technology-induced scenarios of
digitized work. In: Proceedings of the 29th ISPIM Innovation Conference, Stockholm
Bansmann, M.; Harting, K. (2018) Arbeitsplatz-Planung mit Augmented Reality: Vom Papp-Prototypen zum Mixed
Mock-Up. In: Elektrotechnik
Brynjolfsson, E.; McAfee, A. (2014) The Second Machine Age: Work, Progress, and Prosperity in a Time of Brilliant
Technologies, WW Norton & Co
Bauer, W.; Schlund, S.; Strölin, T. (2018) Modellierungsansatz für ein arbeitsplatznahes Beschreibungsmodell der
„Arbeitswelt Industrie 4.0“. In: Wischmann S., Hartmann E. (Hrsg.): Zukunft der Arbeit – Eine praxisnahe
Betrachtung. Springer Vieweg, Berlin, Heidelberg
Bundesministerium für Arbeit und Soziales (BMAS) (Hrsg.) (2016) Grünbuch Arbeit 4.0. Berlin
Bundesministerium für Wirtschaft und Energie (BMWi) (Hrsg.) (2016) Fortschreibung der Anwendungsszenarien der
Plattform Industrie 4.0, Ergebnispapier der Arbeitsgruppe Forschung und Innovation der Plattform Industrie
4.0, PRpetuum Gmbh, München
Dombrowski, U.; Krenkel, P.; Falkner, A.; Placzek, F.; Hoffmann, T. (2018) Prozessorientierte Potenzialanalyse von
Industrie 4.0-Technologien. In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Vol. 113, No. 3, 107-111
Geisberger, E.; Broy, M. (Hrsg.) (2012) agendaCPS – Integrierte Forschungs-agenda Cyber-Physical Systems. acatech
– Deutsche Akademie der Technikwissenschaften, München
Kagermann, H.; Wahlster, W.; Helbig, J. (2013) Deutschland als Produktionsstandort sichern. Umsetzungsempfehlungen
für das Zukunftsprojekt Industrie 4.0, Abschlussbericht des Arbeitskreises Industrie 4.0
Lipsmeier, A.; Bansmann M.; Daniel, R.; Kuerpick, C. (2018) Framework für the identification and demand-orientated
classification of digital technologies. In: Proceedings of IEEE International Conference on Technology
Management, Operations and Decisions Conference, Marrakech
Milosevic, M., Lukic, D., Antic, A. et al. (2016) A distributed collaborative system for internet-based process planning.
Journal of Manufacturing Systems, Vol. 42, 210-223
Nerdinger, F.-W.; Blickle, G.; Schaper, N. (2015): Arbeits- und Organisationspsychologie. Springer Verlag, Berlin
Neugebauer, R. (Hrsg.) (2018) Digitalisierung. Schlüsseltechnologien für Wirtschaft und Gesellschaft, Springer, Berlin
Roland Berger Strategy Consultants GmbH; Bundesverband der deutschen Industrie (Hrsg.): Die digitale Transformation
der Industrie. Unter: https://bdi.eu/media/user_upload/Digitale_Transformation.pdf
Röltgen, D.; Bansmann, M.; Nickchen, D.; Wortmann, F.; Dumitrescu, R. (2018) Datenbrillen als Arbeitshilfe in der
Industrie 4.0 – Bewertung von Anwendungsszenarien von Augmented Reality auf Basis einer Technologie-
Roadmap. In: Gausemeier, J. (Hrsg.): 14. Symposium für Vorausschau und Technologieplanung. 8.-9.
November 2018, HNI-Verlagsschriftenreihe, Band 374, Paderborn
Razzaq, M.A.; Memon, K.H.; Qureshi, M.A.; Ullah, S. (2017) A Survey on User Interfaces for Interaction with Human
and Machines. In: International Journal of Advanced Computer Science and Application, Volume 8 (7), S.
462-467
Schlagowski, H. (2015) Technische Dokumentation im Maschinen-und Anlagenbau: Anforderungen. Beuth Verlag
Selcuk, S. (2016) Predictive maintenance, its implementation and latest trends. Journal of Engineering Manufacture.
231(9), 1670-1679
The National Academies Of Sciences, Engineering, Medicine (Hrsg.) (2017) Information Technology and the U.S.
Workforce. Where Are We and Where Do We Go from Here?, The National Academies Press
Trist, E. (1981) The evolution of socio-technical systems – a conceptual framework and an action research program // A
conceptual framwork and an action research program. Ontorio Ministry of Labour, Ontario, 2
Verein Deutscher Ingenieure e.V. (VDI); Zentralverband Elektrotechnik und Elektronikindustrie e.V. (ZWEI) (Hrsg.)
(2015) Referenzmodell Industrie 4.0 (RAMI4.0), Statusreport
Verband Deutscher Maschinen- und Anlagenbau (VDMA) (Hrsg.) (2015) Leitfaden Industrie 4.0. Orientierungshilfe zur
Einführung in den Mittelstand. VDMA Verlag, Frankfurt am Main
Wu, Z., Sekar, R., Hsieh, S.-J. (2014) Study of factors impacting remote diagnosis performance on a PLC based
automated system. Journal of Manufacturing Systems. 33(4), 589-603
John Agwa-Ejon
University of Johannesburg, Department of Quality and
Operations Management, Johannesburg, South Africa
E-mail: jagwa-ejon@uj.ac.za
Antoine Floribert Mulaba-Bafubiandi
Department of Engineering Metallurgy, University of Johannesburg,
Doornfontein Campus, P. O. Box 17011, Doornfontein 2028, Johannesburg,
South Africa
E-mail: amulaba@uj.ac.za
Jan-Harm Pretorius
School of Engineering Management, University of
Johannesburg, Bunting Road Campus,
E-mail: jhcpretorius@uj.ac.za
Abstract
The paper reports on the an extensive study conducted on artisanal mining of sandstone in QwaQwa. The purpose
of which was to develop a comprehensive method of assessing emerging technology in the mining of sandstone in
QwaQwa. The techniques being evaluated if successful would improve the mining of sandstone at a lesser risk to
the miners and increase the productivity of sandstone as well as the processing capacity of the sandstone thereby
resulting into a reduced pricing of the sandstone as a product. The technology at the forefront of the research was
the solar energy microwave activated equipment which would be used to heat the sandstone rock to very high
temperatures resulting to the blocks of stone scrambling due to differential expansion rates and internal stresses. The
methodology used in the research was the Multi-Criteria Decision Making (MCDM) tool based on five perspectives
used in the comparison of two mining techniques. The MCDM technique relies on the judgement by experts in
the mining paternity to give credible decisions. These experts are usually individuals with a wealth of knowledge
acquired through experience over the years in employment. The experts normally consider both qualitative and
quantitative measurements in arriving at a credible judgement quantification value. The data obtained from these
experts were synthesised to provide an overall numerical score which in this study favoured the solar energy
microwave activated magnetron mining technology. The intellectual merit of this paper is the development of a
comprehensive model for the evaluation of emerging technology in the mining paternity to enable better decisions
to be taken regarding mining techniques and commercialisation. The targeted audience for this paper are the
academicians, Government officials, Policy makers, Mining Practitioners and the QwaQwa community where
sandstone was being mined.
Keywords: Artisanal mining, Sandstone, MCDM, Microwave Energy, Solar Energy and Community
1. Introduction
The artisanal mining of sandstone has been in existence for centuries as a means of job creation
for unconventional miners. The traditional method of mining using chisel and hummer puts these
miners at enormous risks. Research and Technology has enabled the introduction of new emerging
technologies which would improve productivity, reduce cost and conserve energy considerably.
This paper attempts to tackle this problem by posing the following two questions.
●● What are the viewpoints of practitioners and experts regarding the use of solar-energy-
activated microwave technologies to mine sandstone based on social, technological,
economic, environmental, and political (STEEP) perspectives?
●● What best-known concepts and applications will enable the development of a scientific
judgement on the best technology concerning the mining of sandstone in QwaQwa?
The objective of this paper therefore is to study the opportunity to use solar energy in activating
microwave energy used in the mining of sandstone. The intended outcome is to assess the potential
of developing a new mining tool to be used by artisans – at lesser risk to themselves and at lesser
cost. The means under investigation has its own hazards that need to be managed. The methodology
used to address the research problem effectively is the formulation of a hierarchical decision model
that will help to assess the various expert viewpoints.
The model shall provide guidance in the selection and improvement of mining technologies. This
would be for the benefit of government decision-makers, the QwaQwa community, and the small-
scale mining industry worldwide.
2. Literature Review
Multi-criteria decision-making (MCDM) is a tool which is used to make decisions to attain the
optimum solution from multiple alternatives and conflicting criteria. MCDM is widely used to make
decisions for common problems of everyday life (e.g. purchase of television set or car) to complex
problems of large businesses (e.g. self-assessment of organizations services using large number of
criteria and sub-criteria). MCDM model can be applied in all major fields (e.g. energy, environment,
tourism, operations research, manufacturing, project management, etc.), and thus has a wide range
of applications (Toloie-Eshlaghy and Homayonfar, 2011; Mardani et al., 2015a).
rather than electricity generation. The authors used multi-attribute value theory (MAVT) and found
that hybrids with solar and wind has advantage over generators and grid electricity alone. Whilst
wind hybrid is more suitable in coastal region and geothermal hybrid needs high initial investment
costs, solar hybrid showed the most potential.
Agwa-Ejon et al. (2015) discussed about the availability of efficient and productive technologies for
artisanal mining. The authors investigated the technical feasibility and social acceptability of solar
powered microwave assisted artisanal sandstone mining in QwaQwa, Free State, South Africa. They
mentioned that the microwave energy triggered through solar power has a potential to break the
rock. Despite the fact that solar triggered microwave mining will assist the miners, the introduction
of any new technology must be dealt with utmost care.
Georgiou and Skarlatos (2016) combined MCDM, remote sensing technique and geographic
information system (GIS) to determine the best location for solar park in Cyprus. The authors applied
pairwise comparison method within the analytic hierarchy process (AHP) for the site evaluation
using multiple criteria (technical, environmental, social and economic). The suitability of the land
within the study region for solar park ranged from 3% (with most strict application of the framework
minimizing potential investment risk) to 83% (using different weighting schemes for criteria).
Several studies have used MCDM techniques to select renewable energy system that is appropriate
for the specific purpose and location (Wimmler et al, 2015; Chatterjee and Kar, 2016; Kumar
et al., 2017; Azam et al., 2018). Taha and Daim (2013) and Mardani et al. (2015c) conducted a
comprehensive review of the literatures which applied different MCDM techniques (such as AHP
and F-AHP, ANP and VIKOR, TOPSIS and F-TOPSIS, PROMETHEE, and Integrated methods) in
renewable energy issues
4. Research Methodology
The research methodology used in this study is the Multi-Criteria Decision Making (MCDM)
technique combined with surveys and interviews at the preliminary stages of the study. Figure 1
below shows the three stages used in the information gathering and execution of the research.
The expert pairwise comparison questionnaires designed to suit each perspective were served to
thirty-five experts in each category of the perspective namely Social; Economical; Environmental;
and Political (STEEP) perspectives. In the end only sixty questionnaires were analysable after a
thorough and intense scrutiny of the comparison consistency. The results obtained for these twelve
questionnaires per perspective was analysed using both excel and SPSS software. The excel software
model had been specifically developed to suit the analysis as a replacement to the commercial
MCDM software which was not affordable by the researcher.
In the formulation of the hierarchical model for the evaluation of the sandstone mining technology
various levels of the criteria were selected by the experts themselves as shown in figure 2 below.
These criteria would then form the basis for making credible choices by the experts. The collective
judgment by these experts is based on both the qualitative and quantitative inputs from these experts.
The common major steps used in the formulation of MCDM are as follows:
●● The building of the hierarchical decision model.
●● The selection of the experts.
●● The collection of data and the establishment of their validation.
●● The analysis of the results using excel software specifically designed for the pairwise
judgement analysis
Emission of
Solar Energy Total Cost of
Greenhouse Gases
Microwave- Mining One Tonne Governmen
Job during Production
Activated Mining of Sandstone t Backing
Negative Ecological
Operational Footprint Warranty/
Safety and Sophistication Maintenance
Use of Available
Protection Human Ergonomics
Recyclability at Local
Disposal Cost
End-of-Life Sourcing
Training and
Health Operations Waste Chemicals Cost of
Effects - at End-of-Life Transportation
Use Hazardous Waste Gases at of Sandstone Conformanc
Equipment End-of-Life Rocks for e to Existing
Water Political,
Maintenance Return on Legal, and
Health Required Consumptions
Investment Managemen
Effects - during Operations
t Constructs
Lifespan of Solar Consumption of
Risk Assessment by Artisanal
Panel or Other Materials
of Capital Miners
Microwave during Operations
Solar Manual Solar Manual Solar Manual Solar Manual Solar Manual
Triggered Chisel and Triggered Chisel and Triggered Chisel and Triggered Chisel and Triggered Chisel and
Microwav Hammer Microwav Hammer Microwav Hammer Microwav Hammer Microwav Hammer
e Mining Mining e Mining Mining e Mining Mining e Mining Mining e Mining Mining
The development of the hierarchy process is done through four distinct stages as stated below
beginning with the highest which is normally the goal under investigation.
●● In this study the mission or ultimate goal of the study is to undertake a comprehensive
evaluation of the emerging technology for the mining of sandstone in QwaQwa.
●● The STEEP perspectives, which follows the top most mission, are the important enablers
of the mission to be achieved. Therefore, the mission is weighed against each of the
perspectives (social, technological, economic; environmental, and political).
●● The criteria and factors for each perspective are a sub-division of each perspective to a
lower level to be use by the expert decision-makers in their pairwise comparisons. For
example, the social perspective can be divided into job creation; health and safety that
may be further split into public safety and work safety.
IAMOT 2019 | 388
Application of MCDM in Evaluating Emerginging Technology for Artisanal Mining
●● The HDM represents the overall relationship in the framework. The judgement
quantification instrument based on the pairwise comparison is then used to gather
information from the experts – for the synthesis and ranking of the two alternatives.
The selection of experts was accomplished using the stratified sampling complemented by the
snowball sampling which was handy within the academic circles. All the respondents were willing
to participate in the study. Structured questionnaires were administered to the experts for data
acquisition and gathering in the form of a pairwise comparison tool.
The pairwise comparison is a preference choice made by the experts mandated by the researcher
to show preference for one of two items. The magnitude of their liking of one item better than
the other is indicated on a relative scale, as shown in Figure 4 below. In the latter, the pencil
is liked more than the rubber; hence, a mark is made as shown in the figure. The relative scale
to measure how much one likes one item in comparison to the other has descriptive wordings
attached to the number scale – ranging from 1 to 9 on either side. The example of a pencil
and a rubber shows a preference of seven (7) on the left hand side – towards the pencil. Since
the choice is on the left, the number seven is entered in the matrix structure. The opposite
preference of the rubber over the pencil is given by the reciprocal of the first choice, 1/7. The
preference of the same item is always of an equal value; hence, the comparison of one rubber
to another is given the value of one.
9 8 7 6 5 4 3 2 1 2 3 4 5 6 7 8 9
Pencil Rubber
In order to establish the ranking of the perspective, criteria and sub-criteria a matrix structure is
constructed to assist in the derivation of the priority eigen vectors. The results obtained from the
experts were captured in a matrix an example of three items is shown in table 1 below.
The matrix structure is normalised arithmetically by dividing each element in a column by the sum
of all the elements in that specific column. When the results in each column is added it should total
to one (01). The normalised principal eigen vectors can be obtained by averaging across each row
as shown below.
Table 2: Normalised Matrix of the Three Items
Pencil Rubber Ruler
Pencil 5/21 7/31 5/13
Rubber 15/21 21/31 7/13
Ruler 1/21 3/31 1/13
SUM 1 1 1
Table 3. Normalised Principal Eigen Vector (W) for the Three Items
Pencil Rubber Ruler
Pencil 5/21 7/31 5/13 0.2828
Rubber 15/21 21/31 7/13 = 0.6434
Ruler 1/21 3/31 1/13 0.0738
The analysis has shown that rubber is most preferred than pencil and ruler, these figures when
converted to percentages should add up to 100%. To test for the consistency of each expert, the
principal eigen value should be determined and used to evaluate the consistency ratio. The principal
eigen value is obtained by multiplying the sum of each column by the corresponding elements in the
eigen vector and summing them. In the above example, this value is given by:
λmax = (21/5*0.2828) + (31/21*0.6434) + (13*0.0738) = 3.0967 (1)
To measure if the experts’ opinions are consistent, we check if the comparison is transitive. This can
only be achieved if the experts maintain a logical flow in their judgement.
A comparison matrix is consistent if ai*aj = ak (Catala-Lopez, 2014). This conclusion was also reached
by Saaty (1980) who later developed the consistency measure called the degree of consistency –
based on the formula given below:
CI = (λmax- n) / (n-1) (2)
In the above-example, λmax was 3.0967 for the three comparisons where the value of n = 3. CI would
therefore be given by: (3.0967 – 3) /2 = 0.0484. Saaty (1980) also developed a universal consistency
index called the random index. The samples used in the derivation of this index comprised of up to
500 matrices. The standard index for a maximum of ten comparisons is shown in Table 4 below.
Table 4: Standard Random Consistence Index (Ri)
n 1 2 3 4 5 6 7 8 9 10
RI 0 0 0.58 0.9 1.12 1.24 1.32 1.41 1.45 1.49
The RI is then compared to the CI by means of a ratio. If the value of this ratio is smaller than 10%,
the comparison and expert opinion are accepted. However, if the ratio were greater than 10%, the
expert would have to be consulted and adjustments made on the judgement values.
IAMOT 2019 | 390
Application of MCDM in Evaluating Emerginging Technology for Artisanal Mining
CR = CI/RI (3)
In the above example involving the three items, the CR value is given as 0.0484/0.58 = 0.083, which
is 8.3%. a figure acceptable, since 8.3% ≤ 10%.
The values of the consistency index (CI) and the consistency ratio (CR) varied considerably from
the results given by these experts. After the initial screening – and where economically viable –
the inconsistent questionnaires were sent back to the experts, requesting their second judgement
– with the hope of reducing the inconsistency to an acceptable level. Eventually, only twelve (12)
questionnaires per perspective were analysed. The final weighted average of all sixty (60) (5 x 5)
matrices was calculated using the arithmetic mean. The mean of all the priority vectors, consistency
indexes, and consistency ratios was also calculated using the arithmetic mean.
In level two, each of the criteria is compared to its associated perspective. An example relating to the
environmental criteria matrix is shown in Table 6 below. It must be noted that the matrix structure
varied according to the number of criteria associated with a particular perspective. The arithmetic
mean of these criteria matrixes is again also calculated to find the average judgement value for the
twelve expert participants.
Table 6: Pairwise Comparison Matrix for Criteria Developed by an Environmental Expert
With Respect to the Environmental Perspective
Priority
Criteria EGG NEF UAL RE WC WG WCO CMP
Vector
EGG 0.14 0.08 0.21 0.13 0.20 0.14 0.10 0.12 0.1392
NEF 0.14 0.08 0.11 0.13 0.02 0.27 0.20 0.04 0.1242
UAL 0.07 0.08 0.11 0.13 0.10 0.07 0.20 0.12 0.1088
WCO 0.14 0.04 0.05 0.13 0.10 0.14 0.10 0.12 0.1020
CMP 0.14 0.25 0.11 0.13 0.10 0.07 0.10 0.12 0.1261
The final level is level 3 where the alternatives are compared against each of the criteria. Because
of the large outcry for land preservation, the researcher incorporated land preservation in the two
mining alternatives to assess the impact of the emerging technology. In total, twenty-eight (28) (3
x 3) matrices were developed for each of the twelve participants. Again, the average of all twelve
nominated participants was calculated using the arithmetic mean. The impact of the criteria on the two
alternatives and the incorporation of the predominant view of landscape preservation was weighted by
combing the two matrices. The final (3 x 5) matrix is then derived from these two matrices.
The alternatives are then ranked by preference, based on the expert choices provided by the sixty
participants, by combining the weighted average of the criteria and the final average priority vector
of the five perspectives.
Table 6: Aggregate Overall Matrix Including All Levels of the Framework
Overall Idealized
Social Technological Economical Environmental Political Rank
Priority Priority
Solar 0,0733 0,1062 0,0892 0,0949 0,0556 0,4193 1,0000 1
Manual 0,0678 0,0393 0,0686 0,0591 0,0480 0,2829 0,6747 3
Land
0,0603 0,0295 0,0511 0,1019 0,0591 0,3020 0,7203 2
Preservation
The overall consistency ratio is also calculated using the formula below that represents the weighted
average of all the matrices involving all the criteria and the five perspectives.
CRT = ∑wi CIi / ∑wi RIi = 0,0517 (<10%, is therefore acceptable).
Figure 6: The Overall Final Weights eith Respect to the Goal, After Accommodating the
Views of Land Preservation Supporters
The overall ranking of the alternatives whilst accommodation the land conservation views revealed
an average weighted value of 0.42 as shown in Figure 6 above. The result shows more support for
the solar-energy-microwave-activated emerging technology. A weight of 0.28 was derived from the
experts as supporting the traditional mining methods. Another way of interpreting these weights is
that solar-energy-activated microwave mining is (0.42/ 0.28) fifteen times more preferred than the
traditional tools. The difference in the choices exercised by the experts is not significant. This is
probably because of the high initial investment cost of implementing such an emerging technology.
For instance, all the miners would need to be technically trained and assisted, to be able to adapt to
the new technology.
6. Conclusion
In this paper an integrated-analytical-hierarchy decision model was developed to evaluate the solar-
energy-activated microwave sandstone gun – using the STEEP perspectives. Experts from specific
fields of expertise gave their judgment quantification values. These latter were used to rank the
available alternatives, namely, mining with traditional tools such as chisel and hammer, and mining
using the solar-energy-activated microwave. The ranking of these alternatives revealed good support
for the solar-energy-activated microwave mining equipment – with a score of up to 42% - – followed
by land preservation at 38%. The land debate became a prominent area of deep engagement that had
to be considered in the evaluation. Traditional mining tools had a score of 20%. The resultant model
is expected to provide guidance in the selection and improvement of emerging mining technology.
The model will also benefit decision-makers in government, the QwaQwa community, and the
small-scale mining industry worldwide. It is hoped that, if this new technology were adopted, it
would change the way miners in QwaQwa operate. The increased productivity of sandstone would
result in the better pricing of sandstone and its by-products in Southern Africa. In addition, more
efficient and cost-effective operations in the artisanal mining of sandstone would be developed. If
unsuccessful, the model will nevertheless be useful in showing what does not work effectively and
will open the possibility for others to make viable improvements.
7. Acknowledgements
The authors would like to give gratitude to the University of Johannesburg, the mining community
in QwaQwa and the NRF for funding the Operational costs during the research.
References
Agwa-Ejon, J. F., Mulaba-Bafubiandi, A. F., and Pretorius, J. H., (2015), Technological feasibility and cultural
acceptability study of solar power systems for microwave assisted sandstone artisanal mining. In Proc.
Picmet ’15: Management of Technology Age, 2095-2102. Portland, OR: USA.
Ahmad, A., (2015), Socio-economic and health status of sandstone miners: A case study of Sorya village, Karauli,
Rajasthan. Int J Res in Medical Sci, 3 (5), 1159-1164.
Alicia, H. D., Monica, M. G. M., and Jorge, J. A. M., (2011), Application of muliti-criteria decision
methods (MCDM) for the development of functional food products in Venezuela. Procedia Food
Science 1, 1560-1567.
Amirshenava, S., and Osanloo, M., (2018), Mine closure risk management: An integration of 3D risk model and MCDM
techniques. J Cleaner Prod, 184, 389-401.
Azam, M. H., Abushammala, M. F. M., and Qazi, W. A., (2018), Evaluation of the significant renewable energy
resources in Sultanate of Oman using Analytical Hierarchy Process. International J of Renewable Energy
Research, 8 (3), 1528-1534.
Beheshtinia, M. A., and Ahangareian, M., (2018), A new hybrid decision making method for selecting roller concrete
road pavement technology transfer method. International J. of Transportation Engg, 5 (3), 229-242.
Brzozowski, M. and Birfer, I., (2017), Applications of MCDM methods in the ERP system selection process in
enterprises. Handel Wewnętrzny, 3 (368), 40-52.
Catalá-López, F., Hutton, B. and Moher, D. 2014. The transitive property across randomized controlled trials: if B is
better than A, and C is better than B, will C be better than A? Revista espanola de cardiologia, 67(08),
pp.597-602.
Chatterjee, K., and Kar, S., (2016), a multi-criteria decision making for renewable energy selection using z-numbers in
uncertain environment. Technological and Economic Development of Economy, 24 (2), 739-764.
Choudhuri, P. K., (2014), Application of multi-criteria decision making (MCDM) technique for gradation of jute fibres.
J of the Institution of Engineers (India): Series E, 95 (2), 63-68.
Georgiou, A., and Skarlatos, D., (2016), Optimal site selection for sitting a solar park using multi-criteria decision
analysis and geographical information systems. Geosci. Instrum. Method Data Syst., 5, 321-332.
Ilangkumaran, M., Sasirekha, V., Anojkumar, L., Sakthivel, G., Boopathi Raja, M., Ruban Sundara Raj, T., Siddhartha,
C. N. S., Nizamuddin, P., and Praveen Kumar, S., (2013), Optimization of wastewater treatment technology
selection using hybrid MCDM. Management of Environmental Quality: An Int J, 24 (5), 619-641.
Janjic, A., Savi, S., Velimirovic, L., and Nikolic, V., (2015), Renewable energy integration in smart grids-multicriteria
assessment using the fuzzy analytical hierarchy process. Turkish J of Elec Engg and Computer Sc., 23,
1896-1912.
Jato-Espino, D., Castillo-Lopez, E., Rodriguez-Hernandez, J., and Canteras-Jordana, J. C., (2014), A review of
application of multi-criteria decision making methods in construction. Automation in Construction, 45, pp.
151-162.Kaya, I., Colak, M., and F. Terzi. (2017). Use of MCDM techniques for energy policy and decision-
making problems: A review. Int J Energy Res., 42, 2344-2372.
Kumar, A., Sah, B., Singh, A. R., Deng, Y., He, X., Kumar, P., and Bansal, R. C., (2017), A review of multi criteria
decision making (MCDM) towards sustainable renewable energy development. Renewable and Sustainable
Energy Reviews, 69, 596-609.
Ledwaba, P. F., (2017), The status of artisanal and small-scale mining sector in South Africa: Tracking progress. J S.
Afr. Inst. Min. Metall., 117 (1), 33-40.
Lisboa, I. C., Vieira, J., Mouta, S., Machado, S., Ribeiro, N, Silva, E., Ribeiro, R. A., and Pereira, A. F., (2016),
An MCDM approach to the selection of novel technologies for innovative in-vehicle information systems.
International J. of Decision Support System Technology, 8 (1), 43-55.
Mardani, A., Jusoh, A., Nor, K. M. D., Khalifah, Z., Zakwan, N., and Valipour, A., (2015a), Multiple criteria decision-
making techniques and their applications – a review of the literature from 2000 to 2014. Economic Research-
Ekonomska Istraživanja, 28 (1), 516-571.
Mardani, A., Jusoh, A., Zavadskas, E. K., Khalifah Z., and Nor, K. M. D., (2015b), Application of multiple-criteria
decision-making techniques and approaches to evaluating of service quality: a systematic review of the
literature. J Business Econ and Mgt, 16 (5), 1034-1068.
Mardani, A., Jusoh, A., Zavadskas, E. K., Cavallaro, F., and Khalifah, Z., (2015c), Sustainable and renewable energy: An
overview of the application of multiple criteria decision making techniques and approaches. Sustainability,
7, 13947-13984.
Mardani, A., Zavadskas, E. K., Khalifah, Z., Jusoh, A. and Nor, K. M. D., (2016), Multiple criteria decision-making
techniques in transportation systems: a systematic review of the state of the art literature. Transport, 31 (3),
359-385.
Pineda, P. J. G., Liou, J. J. H., Hsu, C-C., and Chaung, Y-C., (2018), An integrated MCDM model for improving airline
operational and financial performance. J Air Transport Mgt., 68, 103-117.
Rahimdel, M. J., and Bagherpour, R., (2018), Haulage system selection for open pit mines using fuzzy MCDM and the
view on energy saving. Neural Comput and Applic, 29, 187-199.
Rostamzadeh, R., Ismail, K., and Noubar, H. B. K., (2014), An application of a hybrid MCDM method for the evaluation
of entrepreneurial intensity among the SMEs: A case study. The Scientific World Journal, 2014, pp. 1-16.
Stojanović, M. (2013) Multi-Criteria Decision-Making for Selection of Renewable Energy Systems. Safety
Engineering, 3, 115-120.
Saaty T.L. 1980. The analytical hierarchy process. New York, U.S.A: McGraw-Hill press.
Seccatore, J., (2015), Efficiency as a road to sustainability in small scale mining. Materials Science Forum, 805, 395-402.
Sheikh, N.J., 2013. Assessment of solar photovoltaic technologies using multiple perspectives and hierarchical decision
modeling.
Shen, L., Muduli, K., and Barve, A., (2015), Developing a sustainable development framework in the context of mining
industries: AHP approach. Resources Policy, 46, 15-26.
Taha, R. A., and Daim, T., (2013), Multi-criteria applications in renewable energy analysis, a literature review. Research
and Technology Management in the Electricity Industry, Green Energy and Technology, Daim et al. (eds),
Springer, London.
Toloie-Eshlaghy, A., and Homayonfar, M., (2011), MCDM methodologies and applications: A literature review from
1999 to 2009. Res J Int Studies, 21, 86-137.
Votteler, R.G., and Brent, A. C., (2016), A literature review on the potential of renewable electricity sources for mining
operations in South Africa. J Energy South. Afr., 27 (2), 1-21.
Votteler, R. G., and Brent, A. C., (2017a), A mining perspective on the potential of renewable electricity sources for
operations in South Africa: Part I – The research approach and internal evaluation process. J S. Afr. Inst.
Min. Metall., 117 (3), 285-297.
Votteler, R. G., and Brent, A. C., (2017b), A mining perspective on the potential of renewable electricity sources for
operations in South Africa: Part II – A multi-criteria decision assessment. J S. Afr. Inst. Min. Metall., 117
(3), 299-312.
Wimmler, C., Hejazi, G., Fernandes, E. O., Moreira, C., and Connors, S., (2015), Multi-criteria decision support methods
for renewable energy systems on islands. J of Clean Energy Technologies, 3 (3), 185-195.
Yazdani-Chamzini, A., Yakchali, S. H., and Zavadskas, E. K., (2012), Using an integrated MCDM model for mining
method selection in presence of uncertainty. Econ Res., 25 (4), 869-904.
Zavadskas, E. K., and Turskis, Z., (2011), Multiple criteria decision making (MCDM) methods in economics: An
overview. Technological and Economic Development of Economy, 17 (2), 397-427.
Ali Daghaieghi
University of Tehran, Alborz Campus, Iran
E-mail: daghaieghi@ut.ac.ir
Naser Bagheri Moghadam
National Research Institute for Science policy, Iran
E-mail: bagheri@nrisp.ac.ir
Ahmad Jafarnezhad Chaghoshi
University of Tehran, Department of Industrial Management,Iran
E-mail: jafarnjd@ut.ac.ir
Reza Kabiri
National Iranian Drilling Company, Iran
E-mail: rkabiri@gmail.com
Abstract
Complex product systems (CoPS) are known as backbone of modern economy in both developed and developing
societies because of their specific characteristics comparing to mass-production goods. As a developing economy,
a growing body of attempts have been made in Iran to achieve manufacturing technology of complex product
systems in the last decades. This paper provides a review on previous achievements and current research interests
for manufacturing measurement systems identifying characteristics of oil and gas wells by National Iranian
Drilling Company. Furthermore, it aims to investigate the research potentials, technological capabilities and firm
level catch-up strategy to overcome barriers of manufacturing complex product through case study. The evidence
shows the importance of multidisciplinary integration and product verification, government’s policies and intensive
investment, close interaction with clients, networking and collaboration between R&D centres and product
developers, firm organization and capacities contribute to resolve the challenges of manufacturing measurement
systems for oil and gas wells in Iran.
Keywords: Catch-up Strategy, Complex Product and System, CoPS, Measurement Systems, Oil and Gas Wells, Iran
1. Introduction
During the last decades, considerable attempts have been made by several latecomer countries
to catch-up with new technologies. Scholars’ studies demonstrate that several factors including
geographical situation, national resources, governmental strategies, time dependent items, and
product characteristics have played important roles in latecomers’ technological catch up and
therefore diverse approaches to technological catch up have been introduced. Miller and Hobday,
classified products into complex product systems (CoPS) and mass-produced consuming goods
(Miller et al., 1995; Hobday, 1998).From Hobday’s point of view complex product and systems
(CoPS) are high value, low-volume, technology and engineering-intensive products, systems,
networks and constructs supplied by a unit of production, purchased by one or more users, usually
under one or more formal contracts within a recognizable single project. They are business to
business capital goods which form the backbone of modern economy and society.
Although latecomers have made remarkable achievements in recent years, they are still lagging
behind the technological leaders in the capabilities of providing CoPS, an effective response is needed
to close the gap. The challenges facing latecomer countries, all of whom previously specialized
in mass-produced goods, seem quite daunting due to the differences in the associated innovation
systems of CoPS and mass-produced goods. (Park, 2012) (Hobday, 2000), (Ren and Yeo 2006).
In addition to inherent obstacles facing developing countries in producing complex product systems,
international sanctions have made technological catch up more challenging in Iran. Meanwhile,
Iranian firms have continuously followed catching up with CoPS mostly focused on energy sector.
The examples of previous studies included wind turbines electricity generation systems (Bagheri
Moghadam et al, 2011), heavy duty gas turbines (Majidpour, 2012), hydro power generation
(Kiamehr et al, 2013), thermal electricity generation systems (Kiamehr et al, 2015), thermal
power plant (Shahrzad et al, 2017), gas turbine (Safdari Ranjbar et al, 2017), ship manufacturing
(Tahmasebi et al, 2017).
Despite the attractiveness of the market’s huge demands, the diversification of similar projects
to the state-sponsored system of governmental firms, the international sanctions has had an
adverse effect on the international cooperation and considered as an obstacle to international
processes to attract knowledge. In the past decade, the National Iranian Drilling Company has
made call for an international tender to supply equipment for measuring Down hole and Surface
Equipment and localizing knowledge of their construction. The outcome of the bidding process
resulted in the definition of a consortium consisting of the private domestic and European-owned
companies. Upon the commencement of sanctions in 2010, foreign parties left the consortium
and the contracts were cancelled. The National Iranian Drilling Company considered this
action to be a window of opportunity and, in order to meet the necessary requirements, created
the conditions for creating knowledge within the firm through an organizational review, and
by defining small projects have deepened it. After building capacity in the firm, it has been
attempting to create the capacity and empowerment of the scientific centres and private sector
of the country. In recent years, considerable success has been achieved in the production of
these equipment in accordance with the conditions of the country’s oil and gas reservoirs in the
offshore and onshore oil and gas fields.
The present study seeks to analyse the role of the various factors in technological catch-up
by reviewing the records of the activities and achievements of the National Iranian Drilling
Company. The purpose of this article is to use a qualitative approach and research strategy to
study the case of a deep study of the National Drilling Company’s experience and the process
of acquiring and creating the technological capabilities necessary for the construction and
upgrading of measuring equipment by the company and, while studying the effective factors
identify the challenge on this experience.
The distinctive features of this research are with previous research in Iran, in particular
with regard to the industry in the field of electricity, the great variety of knowledge used
in manufacturing of equipment, the unusual working conditions of equipment, and the
impossibility of official cooperation in transferring knowledge and technology from foreign
companies and also the company has been able to build and upgrade its equipment based on
its internal capabilities.
The paper begins with a description of CoPS and the development of an industrial classification
system for CoPS-based industries. By integrating and classification effective factors on CoPS,
major item in these projects were gathered through interviews. Overall, the analysis shows that most
introduced factors in latecomer’s best practices, have limited effect on catch up in Iran because of
sanctions. The paper is organized into five sections. In the next section a quick review has been
made on technological CoPS definitions and background in developing countries especially in Iran
and continues to show effecting factors on previous projects. Next section describes the research
methodology and analysed result are provided in next section named findings. The survey reached
to conclusion in the last section with a summary and points to future research underway using the
method developed in this paper.
2. Literature Review
utilization of basic capabilities to transition to spontaneous and inclusive partnership, global networking,
standardizing activities and policies and focusing on endogenous research and development; Working
with global companies and groups; Attention to the key role of large domestic enterprises in becoming
a world-class leading company in the field of complex products and systems (Park, 2012).
Chang and Huang studying the successful experience in the development and commercialization of
South Korea’s telecommunications systems from various actors’ integration, project management
and planning, management capabilities, evolution of institutions and technology, and collaboration
between large firms and research centres and internal development as effective factors (Choung et al.,
2007) .In the process of studying the locomotive industry in China, Su and Liu, have identified three
key dynamic capabilities in the development of complex products: customer-centric understanding
of capability, technology acquisition capability and organizational learning (Su et al., 2012). Rang
and colleagues studied the technological leadership and capabilities of leading Chinese enterprises
in the field of medical equipment. Their findings suggest that interdisciplinary integration, investing
in compilation, collaboration, networking, and supporting institutions to overcome the challenge
facing the development and development of complex products, have paid great importance for the
study of governmental electronic systems (Zhang et al., 2013).
Lee and Yoon studied the military aircraft industry in South Korea, China, and Brazil, concluding
that government actions and initiatives, firms’ strategies for technology acquisition (purchase,
construction or cooperation), and the degree to which foreign partners were active in creating the
technological and organizational capabilities in this industry (Lee et al., 2015). Hobday has found
similar paths in the growth of the electronics industry in four Southeast Asian countries. His findings
show that later firms began with simple tasks such as assembling, then they began to improve the
process and then learn the technology of the product through reverse engineering, and eventually
they were able to research and develop the product and process, namely, the ability to innovate in
the product and process ( Hobday, 1996) .
Chudnovsky suggested that the technology accumulation pattern in companies involves the production
of complex capital goods, starting with the maintenance and operation of imported systems, which gives
companies the knowledge and ability needed to produce capital goods. After a while, the companies
that are studying can do repair work on the equipment and partly work on product design (Chudnovsky,
1985) .Hwang considered South Korean experience in the airplane manufacturing industry to consider
the development of Korean technology’s technological capability, including gradual and continuous
movement in the product pyramid system. Korean companies began to assemble aircraft and build
some simple parts, gradually entered into the design and construction of some systems and manufacture
of the tools needed for production, and eventually tried to enter the aircraft design, test and develop the
production process. But their success was limited to small aircraft and could not achieve a decent sales
volume (Hwang, 2000) .Davies refers to the role of repairs and services in increasing the profitability
of suppliers, and shows how feedback from the operation of complex capital goods can be used to
improve exploitation and production (Davies, 2004).
increasing use of renewable energy, especially wind energy, and these rules need to be reviewed
(Bagheri Moghaddam et al., 2011) .
In the field of gas turbines, Majidpour investigated the study of heavy gas turbines in three developing
countries, namely Iran, India and China, and concluded that state involvement in supporting and
intervening in this industry was important in all three countries. In the area of development
and
development of the industry in all three countries, macroeconomic policies of the countries have
played a major role. In another study, which the researcher has done in the field of gas turbines as a
domain of complex products and systems in Iran, It points out that although LGT’s alignment is not
an impossible phenomenon, there are many obstacles in developing countries. LGTs are advanced
industrial products that have grown over the course of fifty years. Some of these technologies
are rooted in jet aircraft engines, whose industry owners are reluctant to transfer knowledge to
developing countries. Therefore, the issue of technological coherence in complex products and
systems, including LGT, has many challenges. He also found that with regard to the technological
and market regime in the LGT industry, the concepts of jump in South Korean complications
could not be developed into the LGT industry. It is also almost impossible for a later state without
historical experience in LGT’s core capabilities, such as system integration. Also, the latter countries
cannot cross this route without heavy investment in previous technologies, because LGT continues
to innovate on subsystems and productivity after installing it. So, in his view, it is more appropriate
to continue the route for the related products and industries, and a later country can pass this route
to the leading country in shorter time. In this way, government-sponsored, government support
and collaboration with universities create infrastructure-based infrastructures for paving the way
(Majidpour, 2012; 2016a).
Kayamehr studied on hydropower and hydropower systems in Iran concluded that in the field of
hydroelectricity, the integration system in developing countries in the industry has been promoted
in the relatively short time of project management skills to innovation capabilities. It is backed by
complex engineering know-how and ultimately led to success in domestic and foreign markets.
Also in the field of thermal energy of Kiamehr, the importance of marketing capabilities and some
of the strategies, such as the acquisition of production capabilities and the creation of design and
engineering capabilities for the development of markets and exports, as well as the transition to the
market leadership stage in the thermal power generation industry, was demonstrated. He pointed
to four stages of transition to market leadership: Overcoming barriers to entry into the industry;
producing production capabilities; Creating design and engineering skills for market development
and exports; and transitioning to market leadership. In addition, Kiamehr studied the accumulation
of technological capabilities in suppliers of complex capital goods in the field of electric power
generation systems. His findings suggest that, instead of starting with the initial stages of the product
life cycle, technological capabilities in this case have been achieved through a non-linear motion
within the design and installation of complex capital goods in these projects. In other words, the
process started from the middle phase, engineering and identifying complex products in the form of
projects, and then the final stage, the operation of complex products, and finally returned to the first
stage, the design of complex products (Kiamehr et al., 2013; 2015).
In the field of airline industry, Naghizadeh and his colleagues Studied the plan of the aircraft
(150-IR) to study the network structure and interaction mechanisms in the innovation network,
as well as the capabilities needed for the network integrator, in general, 12 challenges as well
as 17 mechanisms and tools for integrating into the design phase of the 150-IR aircraft. They
concluded that, firstly, the challenges facing developing countries in integrating a diversified
innovation network differ from developed and developing countries; secondly, the very dynamics
of projects of complex products and systems makes the integration structures and machinery
during the development different from others. Thirdly, the complexity and interconnectedness of
these projects makes the challenge of one of the components quickly spread to other components
of the network (Naghizadeh et al., 2016).
In the field of marine industries, Tahmasebi and his colleagues have reviewed the development of
technological capabilities in one of the industrial organizations in the Iranian maritime industry. In
spite of the fact that most of the models offered in the field of developing technological capabilities
for companies in developing countries as well as new companies emphasize on international
cooperation with leading countries, according to them, but given the sanctions imposed on Iran,
especially in the field of industry Sophisticated dual use, the possibility of widespread international
cooperation in this area is not feasible or very limited. Given these conditions, in order to achieve
different levels of technological capabilities, inevitably, reverse engineering should be used. In
spite of the difficulty in supplying complex products and reverse engineering, complex efforts
have been made in this area, but efforts have been made in this direction, but first of all, it is
necessary to create the necessary infrastructure and invest in necessary capacity for additional
measures are to be provided. In the next step, reverse engineering will create products with a
modest level of technology, including the use of specialist mutatis mutandis experts. Ultimately,
the development of research and development units and the efforts to design and innovate with
reverse engineering of more complex products will streamline the upgrade path. The path to growth
of this industry is a gradual and logical path and the capabilities are gradually accumulating and
developing (Tahmasebi et al., 2017).
3. Influencing Factors
By reviewing and previous practices in literature of technological catch-up in CoPS, relevant factors
influencing by latecomer countries and firms are summarized. The results are categorised and
presented in Table 1. These factors were the base of dissections during interviews.
Table 1: Influencing Factors on Technological Catch up
Suitable technology acquisition: make, buy or collaborate Lee and Yoon, 2015
Foreign partners’ role and government initiatives Lee and Yoon, 2015
Close and organic network between users, suppliers, academic Igel and Wei,
institutes, government and regulators, investors and other companies 2002; Park and Ji, 2015
Choung
Interaction between large-scale companies and local R&D centres
and Hwang, 2007
Market and Establishment of a large demand base Park and Ji, 2015
Demand
Size and orientation of markets Majidpour, 2016a
Human resources development capability and integration capability Igel and Wei, 2002
Bid preparation and project management capacity in CoPS production Davies and Brady (2000)
4. Methodology
A case study is one of the many qualitative and quantitative methods that can be adopted to collect
data for research. Such methods represent part of what is referred to as the research strategy that
details the design and data collection approaches to be used in the research. This study employed the
case study method based on Yin (2014) definition and conducted in-depth analysis of firm level’s
technology accumulation process and catch up activities in Iranian oil & gas industry and targeted
well measurement and real-time data monitoring systems. According to Yin (2014) evidence of
case studies come from six sources: documents, archival records, interviews, direct observation,
participant observation and physical artifacts.
The results are based on qualitative data gathered during a 12-month period of fieldwork in Ahwaz,
including participant observation onshore and offshore field tests and 30 interviews with experts in
R&D, engineering, operation, and maintenance departments of National Iranian Drilling Company
(NIDC) as well as 15 interviews with key players in product research and deployment sectors. In spite
of providing more interview chances, the answers were saturated and no new idea were introduced.
Most interviews were conducted in Tehran and Ahvaz, but some were held in operational bases in
south west of Iran. Information was also collected through participation and observation at brain
storming meetings.
The interviews were semi-structured, containing a sequence of themes to be covered, as well as
suggested questions’. Therefore each interview began with proper general questions related to the
project and continued with focusing on participants’ perspectives on physics of measurement and
output challenges such as quality, reliability, precision. For instance in interview with talents in
R&D institute, we focused on prototyping capabilities, while in interview with NIDC and National
Iranian Oil Company (NIOC) managers we focused on government policies, market factors and the
role research institutes and developers. Interviews ended with free discussion session to gather all
probable factors affecting the projects from both technical and managerial aspects. Interview lasted
50 minutes on average, ranging from 30 to 100 minutes which shows most interviewers participated
effectively. Interview candidates were identified through stakeholders, industry association lists,
organization chart of each sector, and most importantly through the snowball method. Meanwhile,
several documents including long-term strategies, organizational charts, projects reports and
achievements were reviewed. As per interviewer request, their name and position are not published
in this paper.
Once the data collection process for the case studies is commenced, Yin (2014) suggests that the
early analysis of the data is a critical step in the overall interpretation of the case studies According
to Yin (2014) Data analysis in case studies consists of examining, categorizing, tabulating, testing or
otherwise recombining both quantitative and qualitative evidence to address the initial propositions
of a study. This research has been analysed base on theoretical propositions approach. In table one,
previous practices and research background have been summarized and then have been used to
analyse collected data. After categorizing gather data, five major items were generated. In some
cases, a summery covered several categories and to avoid multiple usage of one reference it only
was assigned to one category.
According to Miles and Huberman (1994) then information were extracted from interviews
documents and observations and drown out evidences of challenges. Data checking process were
continued through brain storming and review meetings and other communication methods like
webinars. This type of research methodology including data collecting and analysing methods
had been employed in several previous research related to CoPS in latecomer firms and countries
including Park (2012), Park and Kim (2014), and Park and Ji (2015) .
amounts of currency, unstable foreign cooperation including shutting down the projects for different
reasons such as sanctions or irrationally increase the cost of services, caused crisis in oil production.
Technologies available in the oil and gas industry have always been part of high tech industries.
Drilling industry, due to tough environmental conditions and exposure to unpredictable events
during drilling, is one of the industries that have taken the highest advantage of technology in
relation to time management, financial resource management, safety standards observance and
keeping oil production ceiling. Identification of the parameters of the earth layers and oil and gas
reservoirs in the depths of more than 3,000 meters from the ground is done by logging services in
very poor conditions and at high temperature and pressure and in the presence of corrosive gases
based on a diverse range of technological equipment and by observing the highest standards.
For the detection of hydrocarbon layers between layers of the earth, the outputs resulting from
logging need to be very accurate and sensitive. Failure to use appropriate technology to obtain this
information can waste the huge costs of initial exploration and drilling and deprive the country
of access to new resources. The importance and value of logging services are also tangible in the
comparison of revenue ratio of home services for wellhead technical services. Among the 15 main
services, logging services alone, have allocated more than 25% of technical service revenues
to themselves bases on cost analyses at NIDC. The average cost of drilling a well is about 150
million Euros in Iran and it can be said through the experience that about 10% of the costs are
allocated to logging services.
A look at the history and life of more than one hundred years of exploration and production of oil in
Iran emphasizes the fact that an acceptable level of localization and technology acquisition in this
industry has not been achieved yet. Diversity of technical knowledge and high level of reliability
expected from products, in the one hand, and the lack of infrastructures and validation references,
on the other hand, have had a significant impact on the dullness of technology acquisition process.
In the evaluation and selection of technology acquisition method, it should be tried to meet all the
goals of the organization in relation to the use of technology, and technology-related risks must also
be taken into account. According to the above-mentioned limitations, technology assessment in this
industry is largely based on personal experience. This matter has created a major challenge for the
decision makers who have to make appropriate decisions for the survival of the organization and
development of competitive advantages and also have to make reasonable decisions in relation to
choosing an appropriate technology acquisition method and its localization.
There have been a few number of companies in western countries that have developed this technology
over the last 50 years and mostly they preferred to provide operational services instead of equipment
sales. A closer look at the historical development of measurement tools reveals that their evolutionary
path has been greatly influenced by the technological development in science especially electronic
and computer science in addition to expanding oil exploration in different geographical places with
wide variety of reserve behaviour.
Among countries that entered the measurement tools industry in the last decade, China was the first
latecomer country to promote the industry under the national initiative. China had been actively
conducting research and development on its own by founding the national institutes. In addition to
main duties of each institute, they accepted related projects as well. For instance main researches
of sonic tools have been conducted in national institute of shipbuilding and ocean engineering.
Meanwhile, some privet companies started technological catch up by imitating and reverse
engineering. Some others, negotiated with well-known western companies to move assembly line to
China. On the other hand, in addition to conducted research in local universities, records of conducted
researches by Chinese talents in well logging laboratory of university of Houston shows that china
is reaching a considerable capacity in this industry and will move to technological innovation from
catch up. Chinese brand are widely used in Iran.
Measurement equipment are classified based on operational methods and are often recognized as
wireline logging, logging while drilling, and surface logging. In general three main service providers,
Schlumberger, Halliburton, and GE are the market leaders both in advanced technologies and market
sharing. Due to a high number of production wells as well as a considerable amount of drilling rigs,
Iran is valuable market in oil well logging services. This demand had been supplied by governmental
sector (NIDC) via purchasing equipment from foreign leader companies as well as few well-known
fringe service providers before 2010. In 2010, due to strict and wide sanctions against Iran, previous
players limited their activities and some local privet companies entered to cooperation with foreign
newcomers in order to supply appeared gap in Iran’s domestic needs to logging services.
By emerging this market demand, NIDC decided to expand his activates to build and acquire
necessary knowledge and technologies of manufacturing these tools. One year close cooperation
between NIDC and universities led to a deep feasibility study and provision of RFP. Through
different tenders three high ranked universities were selected and specific industrial poles were
established. The main goal of the contracts were acquiring knowledge and technologies of
measurement equipment of surface logging, wireline logging, and logging while drilling through a
sustainable organization to achieve mature equipment. Through this projects, Iran cached up with
the knowledge and technologies required to manufacture tools to provide above mentioned services
and still working on more improvements.
Table 2: Catch up in Various Sub-systems
Sub Systems Type of Project Field Tests
Surface Logging DAS Software & Hardware, On-line Data Transmission 100%
Production Logging DAS Software & Hardware 100%
Cement Bond Tool Hardware 100%
In table 2 sub-systems are divided into surface and down-hole part of Data Acquisition Systems
(DAS), Cement Bond Tool and Navigation Tool ate two specific down-hole sub systems which
can be connected to Production or Open Hole Logging platforms. Some general achievements in
measurement equipment project include: improving reliability by applying new scientific subjects,
ease of operation, down-time reduction, localizing spare parts and technical supports, establishing
research centres and localization knowledge, ability to manufacturing new versions in future,
establishment test facilities and other infrastructures, provision of job opportunities for talents,
definition of new business in country, reducing time and cost of equipment, developing system
integration and supply chain management knowledge.
6. Findings
sectors as product developer by governmental supports. By creating a network between R&D poles,
product developers and end user a committee consist of stockholders monitored the progress and
coordinated the tasks through holding monthly meetings. Both NIOC and R&D poles invested in
test facilities and laboratories for product validation and also evaluation of components which were
supplied trough supply chains.
procedure. Also manufacturing was done under supervision of 3rd party inspection team. Following
actions were taken for output quality assurance:
For fluid determination tools, a test facility was designed in R&D centre. It consisted of a long tube
with following factors: visible inside, 5 different diameters along the tube, ability to heat up the fluid
up to 125 C, ability to mix oil, water, and gas to make multi-phase fluid in linear and turbulence
conditions.
For formation determination tools some holes including predefined formation blocks were made. In
each sample blocks main factors including material, porosity, density, and saturation ratio were issued.
Periodic tests were taken from the blocks to insure the characteristics are unchanged. Although these
blocks were helpful but couldn’t simulate down-hole high pressure and high temperature conditions.
To overcome these challenges, one abandoned well was assigned to the project.
New tools were run to the well and results were compared to previous results which were taken by
mature tools. In the next stage client agreed to run new products in low risk wells and also asked for
running mature tools to compare the results. Expenses of this method was two times for NIDC but
it was the only way to check and compare the results with well-known brands and mature tools and
reaching to client satisfaction.
7. Conclusions
This paper has examined the case of technological catching up of CoPS in Oil and Gas Industry
of Iran through measurement equipment project to identify project challenges on this successful
process. In This study, NIDC as a service provider or end user,has established a new work flow
from scratch to supply its technological needs in situation that due to vast and strict sanctions,
any type of formal technology transfer and collaboration were impossible. On the other hand,
limitation on local infrastructures and manufacturing facilities were a major concern at the
beginning of projects.
Although government role is significantly different from one country to another, it plays significant
roles in development and use of CoPS especially in latecomer comparing to developed countries.
NIDC as a subsidiary of NIOC and oil ministry can be conceded as a part of government. The
rule of NIDC management at the beginning was initiating and managerial leverage to receiving
support from NIOC and Oil ministry. It started by accumulating all demands to new assets and spare
parts and continued by signing contract with R&D centre, contribution in leading, coordinating
and monitoring progress of project through steering committee. Conducting a deep feasibility
study and previse success satisfied NIOC to invest in all aspects of projects including R&D costs,
infrastructures and setting regulations and standards.
Some scholars suggested that governments involve both directly in CoPS innovation and
development through the provision of governmental subsidies and indirectly through a number of
regulatory measures. In this practice, the role of government is limited to support R&D centres.
On the other, as long as universities and R&D centres are governmental, government compensates
part of these organization costs by these projects without provision of new subsidiaries. Regarding
manufacturing, this process is outsourced to private companies and a committee consisted of R&D
centre, end user and standard team monitor its activity. For evaluate of privet companies have been
selected trough tender procedure and capacity assessment of manufacturing readiness level (MRL),
Capability Readiness Levels (CRL), and technology readiness levels (TRL). For next step and after
completion of first generation of equipment, rule and work flow between NIOC, NIDC, R&D centre
and manufacturer should be reconstructed.
Interactive learning and multi-player networks, interactions and collaboration among key actors at
the begging was a big challenge. As the CoPS producer did not have all the skills, resources and
capabilities to handle all of the required sub-systems and technologies were essential. After few
months, team member (including combination of stakeholders) reached to better understanding of
technical concerns and reach to common literature. After few months of interactive learning, some
team member were laid off and teams limited only to key players. Although managing these teams
at the begging was challenging but by resizing the teams and reaching to common understanding it
was managed in proper way.
Existence of large and remarkable domestic market governmental support to limit import of similar
goods which are manufacturing locally increased the demand for measurement tools in Iran. Due
to the country’s need to measurement tools, accumulating real demand to tools and spare parts led
to create a unique opportunity for investing on research and development, manufacturing facilities,
and infrastructures. At this phase, manufacturing is busy to satisfy local market needs and as long as
the life cycle of products are big enough (more than 5 years), manufacturing will find opportunity
for entering into global competitive markets. Key items for capturing markets of measurement
tools are performance and data precision. Newly developed tools should start their competition
with well-known brands from the first day. So this is an absolute condition of survive or death.
Therefore experts claimed that client satisfaction is vital in operation market and consequently, if
tools fails according to client’s standards, manufacturing market will be lost. According to the client
satisfaction is more challenging than market.
Because of importance of oil production in Iran, any progress and advancement in this sector are
under influence of national and sectoral policies including national science and technology availability.
International relationships and sanctions played a double roles on this process. In first sight, sanctions
IAMOT 2019 | 411
Managing Technology for Inclusive and Sustainable Growth
limited international collaborations between local universities, R&D centres with leaders. It had direct
impact on design approaches of systems and supply chain. It also imposed extra costs and time on
NIOC to build needed knowledge and technologies. In contrast, it was the initiator of the projects and
main reason to bring justifications to top management. As long as deploying measurement tools as a
strategic and vital project are concerned, sections can be considered as an opportunity window.
References
Acha, V., Davies, A., Hobday, M., and Salter, A., (2004), Exploring the capital goods economy: complex product
systems in the UK, Industrial and Corporate Change, 13 (3), 505–529.
Bagheri Moghaddam, N., Mousavi, S. M., Nasiri, M., Moallemi, E., Yosefdehi, H., (2011), Wind energy status of
Iran: evaluating Iran’s technological capability in manufacturing wind turbines, Renewable and Sustainable
Energy Reviews, 15 (8), 4200-4211.
Baraldi, E. (2009), User-related complexity dimensions of complex products and systems (CoPS): A Case of
implementing an ERP system, International Journal of Innovation Management, 13 (1), 19–45.
Choung, J. Y., and Hwang, H. R., (2007), Developing the complex system in Korea: the case study of TDX and CDMA
telecom system, International Journal of Technological Learning, Innovation and Development,1(2), 204-
225.
Chudnovsky, D., (1985), The Entry into the Design and Production of Complex Capital Goods: The Experiences
of Brazil, India, and South Korea, In M. Fransman, ed., Capital Goods in Economic Develop, London,
Macmillan.
Davies, A., and Brady, T., (1998), Policies for a complex product system, Futures, 30 (4), 293–304.
Davies, A., and Brady, T., (2000), Organisational capabilities and learning in complex product systems: towards
repeatable solutions, Research Policy 29 (7–8), 931–953.
Davies, A., (2004), Moving base into high-value integrated solution: a value stream approach, Industrial and Corporate
Change, 13(5), pp.727-756.
Davies, A., and Hobday, M., (2005), The Business of Projects (Managing Innovation in Complex Product Systems),
New York, Cambridge University Press.
Davies, A., Brady, T., Prencipe, A., and Hobday, M., (2011), Innovation in complex products and systems: implications
for project based organizing, Advances in Strategic Management, 28, 3–26.
Du, B., Sh Guo, X., Huang, Y. Li, and Guo, J., (2015), A pareto supplier selection algorithm for minimum the life cycle
cost of complex product system, Expert Systems with Applications 42 (9), 4253–4264.
Gunawan, Igel. B., and Ramanathan, K., (2002), Innovation networks in a complex product system project: the case of
the ISDN project in Indonesia, International Journal of Technology Management, 24(5/6), 583-599.
Hardstone, G. A. P., (2004), Capabilities, structures and strategies re-examined: incumbent firms and the emergence
of complex product systems (CoPS) in mature industries, Technology Analysis & Strategic Management,
16 (2), 173–196.
Hobday, M., 1996, Complex systems vs mass production industries: a new research agenda. Working paper prepared
for CENTRIM/SPRU/OU Project on complex product systems, EPSRC, Technology Management Initiative
GR/K/31756
Hobday, M., (1998), Product complexity, innovation and industrial organization, Research Policy, 26(6), 689–710.
Hobday, M., and Rush, H., (1999), Technology management in complex product systems (CoPS) – ten questions
answered, International Journal of Technology Management, 17 (6), 618–638.
Hobday, M., (2000), The project-based organization: an ideal form for managing complex products and systems?,
Research Policy, 29 (7–8), 871–893.
Hwang, C.Y., (2000), The aircraft industry in a late comer economy: The case of sought Korea, SPRU-Science and
Technology policy Research Unit, Brighton, University of Sussex, PhD, 317.
Igel, B., and Wei, Z., (2002), A framework to analyse the competence to innovate complex product systems in the
stored program control switchboard industry, International Journal of Entrepreneurship and Innovation
Management, 2(6), 537-556.
Kiamehr, M., Hobday, M., Kermanshah, A., (2013), Latecomer systems integration capability in complex capital goods:
the case of Iran’s electricity generation systems, Industrial and Corporate change, http://doi:10.1093/icc/
dtt036.
Kiamehr, M., Hobday, M., and Kermanshah, A., (2014), Latecomer systems integration capability in complex capital
goods: the case of Iran’s electricity generation systems, Industrial and Corporate Change, 23 (3), 689–716.
Kiamehr, M., Hobday, M., and Hamedi, M., (2015), Latecomer firm strategies in complex product systems (CoPS): the
case of Iran’s thermal electricity generation systems, Research Policy, 44(6), 1240–1251.
Lall, S., (1992), The Technological capacities and industrialization, World Development, 20(2) pp.165-186.
Lee, J. J., and Yoon, H., (2015), A comparative study of technological learning and organizational capability development
in complex products systems: distinctive paths of three latecomers in military aircraft industry, Research
Policy 44(7), 1296–1313.
Majidpour, M., (2012), Heavy duty gas turbines in Iran, India and China: do national energy policies drive the industries?,
Energy Policy, 41, 723-732.
Majidpour, M., (2013), Promoting industrial competitiveness in complex product systems: Iran Industrial Policy Case
Study, Economic Development, Industrial and Financial Policy.
Majidpour, M., (2016a), Technological catch-up in complex product system, Journal of Engineering and Technology
Management, http://dx.doi.org/10.1016/j.jengtecman.2016.07.003.
Majidpour, M. (2016b), International technology transfer and the dynamics of complementarity: a new approach,
Technological Forecasting and Social Change. http://dx.doi.org/10.1016/j.techfore.2016.03.004.
Miller, R., Hobday, M., Lerouxdemers, Th., and Olleros, X., (1995), Innovation in complex systems industries: the case
of flight simulation, Industrial and Corporate Change, 4(2), 363-400.
Miles, M. B., and Huberman, A. M., (1994), Qualitative Data Analysis. 2nd edn. Sage, Thousand Oaks.
Ngai, E. W. T., Jin, Ch., and Liang, T.,(2008), A qualitative study of inter-organizational knowledge management in
complex products and systems development, R&D Management, 38(4), 421-440.
Naghizadeh, M., Manteghi, M., Ranga, M., and Naghizadeh, R., (2016), Managing interaction in complex product
systems: the experience of IR-150 aircraft design program, Technological Forecasting and Social Change,
http://dx.doi.org/10.1016/j.techfore.2016.06.002.
Park, T. Y., (2012), How a latecomer succeeded in a complex product system industry: three case studies in the Korean
telecommunication systems,Industrial and Corporate Change, 22(2), 363–396.
Park, T. Y., (2013), How a latecomer succeeded in a complex product system industry: three case studies in the Korean
telecommunication systems, Industrial and Corporate Change, 22 (2), 363–396.
Park, T. Y., and Kim, J. Y., (2014), The capabilities required for being successful in complex product systems: case
study of Korean e-government, Asian Journal of Technology Innovation, 22 (2), 268–285.
Park, T. P., and Ji, I., (2015), From mass production to complex production: case of the Korean telecom equipment
sector, Asia-Pacific Journal of Accounting & Economics, 22 (1), 78–102.
Prencipe, A., (2000), Breadth and depth of technological capabilities in CoPS: the case of the aircraft engine control
system, Research Policy, 29 (7–8), 895–911.
Safdari Ranjbar, M., Rahmanseresht, H., Manteghi, M., Ghazinoori, S. S., (2017), Key drivers affecting technological
catch-up in complex product systems: Iran’s gas turbine industry, 26th International Association for
Management of Technology Conference (IAMOT2017), Vienna, Austria. https://www.researchgate.net/
publication/317831543
Tahmasebi, S., Fartookzadeh, H.R., Booshehri, A.R., Tabatabaiean,S.K., Ghadir Khalajani, J., (2017), The stages of
formation and development of technological capacities: A marine industry organization, Journal of Science
& Technology Policy, 8(4), 19-33.
Teixeira, F., Guerra, O., Ghirardi, A., (2006), Barriers to the implementation of learning networks in complex production
systems: a case study on offshore oil rigs, Latin American Business Review. Vol. 7, No. 2, pp. 71-92.
Ren, Y. T., and Yeo, K. T., (2006), Research challenges on complex product systems (CoPS) innovation, Journal of the
Chinese Institute of Industrial Engineers, 23 (6), 519–529.
Shahrzad, S. R., Hamedi, M., Mohammadi, M., (2017), Two level catch-up in Iran thermal power plant manufacturing
industry, Journal of Science & Technology Policy, 9(1), 69-83.
Su, J., and Liu, J., (2012), Effective dynamic capabilities in complex product systems: experiences of local Chinese firm,
Journal of Knowledge-Based Innovation in China, 4 (3), 174–188.
Yin, R. K., (2014), Case Study Research: Design and Methods, 5thEdition, Sage Publication.
Zhang, L., Lam, W., Hu, H., (2013), Complex product and system, catch-up, and sectoral system of innovation: a
case study of leading medical device companies in China, Int. J. Technological Learning, Innovation and
Development, Vol. 6, No. 3.
Hashem Moazzez
University of Tehran, Tehran, Iran
E-mail: h.moazzez@ut.ac.ir
Abstract
In recent years, many studies have been conducted on technological collaboration, however, the process of
evolution and the sustainable technological collaboration forming has been considered in a small number of
studies. Firms face two major challenges in evolving and creating technological collaboration. First; identifying
the right partners to establish a technological collaboration; and second, learning how to work with them. About
this, comprehensive identification and analysis of the barriers and challenges in the process of evolution and the
forming of technological collaboration has great importance. These challenges, which relate to different aspects of
management, are due to the differences of partners in their strategy, culture, goals, values, customer, market and etc.
And have different priorities for them. In this study, in order to comprehensive and integrated identify and analyze
of barriers and challenges of the forming and management of technological collaboration, 5 different technological
collaboration in the field of electronics and hardware was studied. These technological collaborations are formed for
various purposes such as new product development, technology development, innovation, technology transfer, and
among different partners including large corporation, SME, contractor, startup, business accelerator, venture capital
fund and technology exchange broker. The collaborations studied were structured differently, but a common feature
of all these collaborations was the presence of at least one large corporation and one SME in each of them. Finally,
by reviewing this technological collaboration, 34 challenges in 8 categories were identified a comprehensive model
for analyzing the emergence of challenges in technological collaboration was presented. In the following, in order to
rank the significance of the identified barriers and challenges, different from large firms and SMEs, a questionnaire
was designed and distributed among all technology-based firms on the field of electronics and hardware in Iran.
The results of this section indicate that for large corporations, “Being time-consuming the proof of technological
claim” by the SMEs and for SMEs “Lack of intellectual property mechanism” are the most important challenges.
Also, for both groups, the “geographical distance between firms and consumer industries” was identified as the least
important challenge.
Keywords: Technological Collaboration, Partnership, Challenge, Barrier, Electronics and Hardware, Grand
Theory
1. Introduction
The management of technology in today turbulent environment is less and less a matter of single
firm. The key technical knowledge and assets needed for the development and production of
product and processes are often dispersed among a number of firms. Even when all the assets are
embodied in one company, managers prefer to undertake technological activities together with
other companies, in order to share risks and costs. When companies are exchanging technology, the
traditional relationships based on economic exchange are often overtaken in favor of co-operative
relationships with other firms that are characterized by a relative long-term, strategic orientation that
called technological collaborations (Cagliano et al., 2000).Nevertheless, firms are faced with two
major challenges in building a collaboration. First; identifying the right partner for collaboration, and
learning how to work with them. One can divide the process of creating a technological collaboration
from separate firms into three main parts: (Birkinshaw et al., 2007)
●● Finding: find the right partner for collaboration
●● Forming: negotiation, and forming of collaboration requirements
●● Performing: implementation of collaboration and operationalization of agreed details
studying different types of technological collaboration, studying the method and model of selection
of the most appropriate type of technological collaboration, studying the process and framework
of technological collaboration forming, studying the goals and impact of the presence of firms in
technological collaboration and studying the various factors affecting in a technological collaboration,
are topics that have been addressed in previous research on technological collaboration (Hoffmann
and Schlosser, 2001).In this regard, identifying and analyzing the challenges facing technological
collaboration, with the goal of solving them and collaboration stability is important, which has been
studied in less research. On the other hand, these little studies on the challenges and barriers of
technological collaboration forming are about a bunch of these challenges. (Such as (Akdoğan and
Cingšz, 2012; Darabi and Clark, 2012; Mohr and Spekman, 2016; Muegge, 2013) that behavioral
challenges or (Evans and Wolf, 2005; Nan and Kumar, 2013) that structural challenges and (Ansari
et al., 2013; Muscio, 2007) that has investigated the technological challenges.) So, there is a lack of
researches that examine all these challenges simultaneously and has been thoroughly analyzed. In this
context, there is lack of research that examines all these barriers and challenges simultaneously and
has been thoroughly analyzed. Especially what is important in this regard is the study of the process
of the emergence and appearance of these barriers and challenges, examining their relationship with
each other, providing a comprehensive model for them, and ultimately examining their importance
for different actors. Therefore, there is a significant gap in the previous researches, which in this
research is being investigated. Therefore, the research questions include:
1. What are the barriers and challenges in forming of technological collaboration?
2. What is the process of the emergence and appearance of these barriers and challenges?
3. What is the significance of each of these barriers and challenges for different partners of
a technological collaboration?
The overall framework of this study is that initially, because of the inability to study all the sector of
technology, the sector of electronics and hardware was chosen for study. Subsequently, for a deep
study of this sector of technology in Iran, a number of technological collaboration were selected
by using purposive sampling. In this regard, attention was paid to the selection of cases that could
properly describe the aspects of the phenomenon under study. The study of these technological
collaborations began qualitatively and through semi-structured deep interviews and continued to
reach the theoretical saturation in barriers and challenges of technological collaboration forming.
After each interview, its analysis was carried out in accordance with Grounded theory. Because after
examining the barriers and challenges that identified in previous studies, it has been found that in
many researches, the studying of these barriers and challenges is not the main question of research
and the focus of researchers, and many of the barriers and challenges of technological collaboration
forming have not been introduced in them. There are also very few of these researches in the sector
of electronics and hardware. Finally, 5 technological collaborations were studied and 34 barriers
and challenges were identified in process of technological collaboration forming and a final model
was presented for the process of their emergence and appearance. In the following, in order to
assess the identified barriers and challenges in a larger society, a questionnaire was designed and
distributed among all technology-based firms of electronic and hardware sector in Iran, and ranked
the importance of these barriers and challenges for various partner of technological collaboration
(with the exception of small and big firms).
2. Literature Review
.
Figure 1: Framework of Technological Collaboration Forming (Mueller and Herstatt, 2000)
What is important here is the barriers that prevent firms from entering into this process, as well as
the challenges faced by firms during this process. Therefore, we will continue to review the barriers
and challenges presented in previous studies.
the presence of a leader among the members (Sarker et al., 2009), and without acceptable vision and
goals to all members. Lack of these is other major challenges in the technological collaboration.
(Darabi and Clark, 2012; Lindman and Rajala, 2012; Shamsuzzoha et al., 2013) In addition to
the vision and goals, the lack of shared values also challenges the members of a technological
collaboration. (Shamsuzzoha et al., 2013)
Institutional challenges and challenges related to the internal organization of the members are other
challenges. In the technological collaboration, partners have roles and responsibilities, and the lack
of a clear definition of these roles and responsibilities is one of the identified structural challenges.
(Evans and Wolf, 2005; Shamsuzzoha et al., 2013) In addition, the lack of a formal and coherent
team structure of some partners of the technological collaboration (especially small and medium
enterprises) (Nan and Kumar, 2013) is another structural challenge of technological collaboration.
Although the creation of a network among small and large firms is one of the most common types
of technological collaboration, in some cases, the imbalance between the sizes of the members
financially, become a barrier to collaboration creation. (Kshetri and Schiopu, 2007)
Finally, since many technological collaboration are designed for innovation and using the
technological capabilities of other members (Birkinshaw et al., 2007; Schøtt and Jensen, 2016),
technological challenges such as low absorbing capacity (Muscio, 2007; Scaringella and Burtschell,
2017), lack of R & D in the members (Ansari et al., 2013; Muscio, 2007; Shane and Venkataraman,
2000), and the lack of familiarity of manager’s companies (especially small and medium-sized
enterprises) with technological collaborations (COY et al., 2007; Shamsuzzoha et al., 2013) have
also been introduced as another challenge in collaboration forming.
3. RESEARCH DESIGN
the interviewees were asked to express their views on these two issues freely. First, details of the
collaboration (including how to find partners, points of interest in the initial negotiations, business
plan, shared resources, agreements and initial objectives, and finally the results). Second, the various
barriers and challenges of technological collaboration. Finally, the audio file of these interviews
turned into text and analyzed.
ctive
Indu
obje
Title technological collaboration details
stry
collaboration structure
This technological collaboration done to design and manufacture a 6-
channel electrocardiograph (used to record ECG), between two rival
New product development
companies (A and B) and two contractors. The design and development of
Medical Equipment
Common A
various parts of this new product, according to the technical and
design and
managerial capabilities of each partner, is divided between them. The
productio M N
1 achievements of this collaboration are as follows:
n of the
1. Convert potential competitor to a business partner
electrocar B 2. Reduce costs by dividing the costs of design, production and
diogram
commercialization of the product between the two firms A and B.
3. Reduce time to market and reduce product risk by dividing tasks based
on the key capabilities of firms A and B
In this technological collaboration, firm C, as a start-up in accelerator D,
Was formed around an innovative module for rapid diagnosis of heart
design and D attack and entered to technological collaboration with firm B after
Medical Equipment
manufactu
successfully testing and initializing a sample of its product. This strategic
re of a
innovation
knowledge knowledge of automation system and process control from firm H to firm
transferrin I. The automation system of the firm H was used in the oil and gas industry
g to build H
and firm I used it in power station. Achievements of this decision include:
the
4 1. Firm I access to the required technology quickly and had more stable
automatio I
n system
entry into the competitive market.
and 2. Significant income of firm H from the industry that did not enter it.
process 3. The development of the internal capabilities of the company H during
control the collaboration with the company I.
In this technological collaboration, the challenge of unique counting of
Solving of technological challenge
Designing people traffic in the firm L (active in the tourism industry) was transformed
and into RFP by firm J, as technology exchange broker, and after publishing it
building a and collecting and checking received proposals, eventually, proposal of
system for K firm K was selected and entered into an executive phase. The
counting L achievements of this collaborative effort include:
Tourism
5 the 1. Reduce the cost and time of access to the product for the firm L.
number of 2. Examining all possible technological solutions through RFP and
human J collecting various proposals due to the presence of technology exchange
traffic of broker J.
the public 3. Facilitating the forming of technological collaboration with the presence
centres of technology exchange broker J, despite the activity of firm L is in a
diverse industry.
Broker Venture capital Fund Accelerator Contractor Small firm Big firm
According to the main approach of the study, which is a multiple case study by using Grounded
theory, the extracted codes from each interview form the basic paradigms of each case. Then, with
the aggregation of the data and the pattern obtained from each case, the integrated model is formed,
and the analysis of the subsequent cases continued. This comparison also revises coding or changes
to the primary pattern, and this process continues as long as other new interviews and coding do not
change the model created. The executive procedure and the sequence of interviews as well as the
mechanism for achieving theoretical saturation shown in the table2.
Accordingly, in order to study the first case, two interviews were conducted and analyzed and coded.
All interviews were recorded and some suspicious claims were verified by talking to other people
or archival documents, and finally, 15 concepts that express barriers and challenges of technological
collaboration forming, were identified. In the following of research, by studying the second case and
conducting three interviews with the managers of the firms present in this technological collaboration,
all the information was analyzed like the first case. Studying this case led to the identification of 5
new barriers and challenges, based on the primary model was completed and some of the coding
in the first case were redone. Studying the third case was conducted with three interviews and their
analysis and completion of the model continued with the identification of 14 new concepts. In the
fourth case, three interviews were conducted with firms participating in the collaboration, but none
of these interviews resulted in the addition of a new concept (barriers and challenges of technological
collaboration forming), which this meant achieving theoretical saturation. But in order to ensure
this, the fifth technological collaboration was followed up by conducting three other interviews, but
the study of this case did not lead to the identification of the new concept, and thus the qualitative
section, with performing 14 interviews and analyzing them and achieving the 34 final concepts
(barriers and challenges of technological collaboration forming), which are in Table 3, stopped and
the final model was extracted in Figure 2.
It should be noted that all interviews lasted from 40 to 90 minutes and recorded in audio and after
converting audio file to text, the coding steps done. The coding steps used in this study include open
coding, axial coding and selective coding. In open coding, the raw data obtained from the interviews
was classified according to the same issues. The output of this coding was a summarization of
massive information of interviews in the form of 257 codes. After reviewing these codes, they
were categorized in the form of concepts. Each concept contains codes that have the same content.
In the following, with the aim of establishing a relationship between concepts, axial coding was
done and concepts dividing into 8 categories. Finally, in order to select the main category, sorting
it with other categories and validation, the selective coding was done. In this coding, the main
category as a phenomenon, define and other categories were related to this principle and axial
category(Boyatzis, 1998; Strauss and Corbin, 1998). The MAXQDA12 software was used here to
ease code identification, analysis and management of data.
firm
cases ber of interviews
age firm of codes cepts concepts
staff
Managing
A 34 11 interview 1 16 12 0
Director
case 1
R&D
interview 2 30 3 8
B 290 20 Manager
interview 3 Manager 14 3 6
Managing
case 2 C 10 2 interview 4 7 2 4
Director
D 33 3 interview 5 Manager 3 0 3
case studies and qualitative interviews
Managing
E 26 14 interview 6 27 4 15
Director
case 3 Managing
F 8 28 interview 7 43 10 18
Director
G 4000 46 interview 8 Manager 13 0 9
R&D
interview 9 17 0 12
Manager
H 80 14
interview R&D
case 4 22 0 14
10 Manager
interview R&D
I 525 14 20 0 12
11 Manager
interview
J 320 40 Manager 15 0 9
12
interview Managing
case 5 K 10 6 19 0 15
13 Director
interview
L 25 3 Manager 11 0 7
14
num- aver- total required number of
% of col- volume of
Quantitative ques-
100 -
Big firms 170 61 100 61 52 54
795
Small firms 3 - 100 18 354 60 212 136 140
the experts in technology management and experts in the sector of electronic and hardware and the
content of the questionnaire was revised according to their point of view.
Finally, in order to analyze the collected data from questionnaires, studying the relationship between
the identified barriers and challenges and ranking them, Friedman test was used. The results were
presented by separating of small and big firms in the table3. Also in the APPENDIX information
from the SPSS software is provided to implement the Friedman test.
4. DATA ANALYSIS
4.1. Identified Barriers and Challenges
Table3 expresses the barriers and challenges of technological collaboration forming. As stated, these
identified barriers and challenges include 8 main categories, each of which represents an aspect of
the management of technological collaboration. These 8 categories include 3 barriers and 5 challenge
categories. Barriers prevent firms from entering technological collaboration and appear in the early
stages of the process of technological collaboration forming (defining of objective and finding
the partner), and challenges appear at the time of implementation and operation of technological
collaboration (the forming of collaboration and its implementation).
Three categories of barriers (including geographical barriers, cultural barriers and organizational
barriers) in a way express the differences between the partners of the technological collaboration
in different organizational characteristics. The geographical barriers are due to the geographical
distance between the partners of the collaboration and among them with the consumer industries.
Cultural barriers point to the differences in the various cultural aspects of the various actors. This
difference is different in the culture of the firms, the lack of common internal values and the various
interests of firms in their business. Organizational barriers arising from differences in programs
and visions and internal strategies of the partners. In addition, the organizational hierarchy of each
partner can also prevent forming of technological collaboration, which is also considered to be
organizational barriers.
Five categories of challenges in the final model include various managerial aspects. Challenges
that emerged after the forming of technological collaboration, in the direction of the realization of
planned objectives, were called operational challenges. These challenges refer to the challenges that
involved in achieving the planned objectives and fulfill the obligations of the various partners of
technological collaboration. Behavioral challenges and human challenges are two other categories of
challenges identified. Behavioral challenges refer to the challenges in the organizational behavior of
the partners of technological collaboration or the individual behavior of their managers and happen
due to the inattention to the interests of other partners of the collaboration or the lack of trust among
the partners. But human challenges refer to problems in the interactions of human resources that
are active in collaborative partners, including challenges in the internal interaction of the members
of each partner or problems in the interactions of the members of the various firms in collaboration
with each other. The technological challenges that had the highest number of initial codes in open
coding, have a wide range, but all identified challenges in this category are related to technology
(that collaboration has done around development, commercialization or exchange it). Some of these
technological challenges are limited to small firms, and some of them are found in big firms. Due
to the fact that the main purpose of every technological collaboration in this study is a technological
goal, it seems that the high number of initial codes of this category is due to this reason. Ultimately,
legal challenges are infrastructural and emerging from legal and governance institutions, and affect
any kind of technological collaboration due to their infrastructure nature.
4.2. Ranking of Barriers and Challenges
In the table3, the results of the quantitative section of research and Friedman test are also presented
separately in small and big firms. Based on the identified barriers and challenges from the
perspective of big firms, “Being time-consuming the proof of technological claim by small firms,”
“High risk of success in technological collaboration with small firms” and “Lack of familiarity with
technological collaboration” are the most important challenges, that all three of these challenges
are from the technological challenges. In terms of these firms, two geographical barriers, namely,
“Geographical distance between partners”, and “Geographical distance between partners and the
consumer industries” are the least important challenges. From the perspective of small firms, the
most important challenges include “Lack of intellectual property mechanism in Iran”, “Threat of
disclosing the competitive advantage and technology in technological collaboration” and “Lack
of familiarity with technological collaboration”. The first challenge is a legal challenge and the
next two challenges are technological challenges. Also from the perspective of these firms, the
challenge of “Lack of familiarity with the technological requirements of design and production” and
“Geographical distance between partners and the consumer industries” has been introduced as two
the least important challenges.
What can be expressed Based on the ranking, is that seems for big firms quick and cost-effective
achieving to objectives of technological collaboration is desirable, and barriers and challenges that
are obstacle to realizing this, have a higher position in the ranking. Because of challenges such as
“Being time-consuming the proof of technological claim by small firms”, “High risk of success in
technological collaboration with small firms”, “Lack of attention to the cost of activities by small
firms”, “Lack of specific team and organizational structure to achieve goals in small firms” and
“Inability to implement technology in industrial scale”, which postpones quick and cost-effective
achieving to objectives of technological collaboration, are ranked higher than other barriers and
challenges from the perspective of big firms. Also, for small firms, the barriers and challenges that
somehow point to the possibility of abusing of technology and their technical knowledge by big
firms, as well as failure to fulfil collaboration obligations of big firms, are higher than other barriers
and challenges. Because the challenges of “Lack of intellectual property mechanism in Iran”, “Threat
of disclosing the competitive advantage and technology in technological collaboration”, “Failure
to run obligations on time by big firms”, “Lack of professional reference to solve conflicts and
disagreements”, “Lack of trust in relationships” and ultimately “One-sided vision to collaboration’s
outcome (less attention to partner’s interests)” all of which refers to these two concerns, are ranked
higher for small firms.
Table 3: Identified Barriers and Challenges and Ranking
Importance rank among small firms Importance rank among big firms (by using Friedman test) Categories
Code (by using
Concepts (barriers and challenges) by using Grounded
The content of each category in
Grounded theory theory)
SPSS
geographical barriers are due to the 11 33 Ch01 Geographical distance between partners
geographic
geographical distance between the Geographical distance between partners and
34 34 Ch02 al barriers
partners of the collaboration. consumer industries
Cultural barriers point to the differences Differences in internal culture of partners
23 19 Ch03
in the various cultural aspects of the
various actors. This difference is different cultural
25 23 Ch04 Lack of shared values within the partners barriers
in the culture of the firms, the lack of
common internal values and the various
20 24 Ch05 Different interests of partners
interests of firms in their business.
Disproportionate size of partners in terms of
Organizational barriers arising from 30 29 Ch06 income
differences in programs and visions and
Lack of transparent objectives and acceptable
internal strategies of the partners. In 22 10 Ch07 visions for defining collaboration organizatio
addition, the organizational hierarchy of
Lack of program and strategy for collaboration in nal barriers
each partner can also prevent forming of 15 9 Ch08
firms
technological collaboration, which is also
Forcing to collaboration from senior executives
considered to be organizational barriers. 8 28 Ch09
side
Challenges that emerged after the 4 20 Ch10 Failure to run obligations on time
forming of technological collaboration, in Ch11 Lack of attention to the cost of activities
29 5
the direction of the realization of planned
32 31 Ch12 Impossibility of clear definition of responsibilities
objectives, were called operational operational
challenges. These challenges refer to the 10 4 Ch13 Lack of successful experience of collaboration challenges
challenges that involved in achieving the High risk of success in technological
26 2 Ch14 collaboration
planned objectives and fulfill the
obligations of the various partners of Lack of leadership and comprehensive
18 14 Ch15
technological collaboration. management of collaboration
Behavioral challenges refer to the Self-esteem and unrealistic perception of
31 16 Ch16 abilities
challenges in partners organizational
behavior or the individual behavior of One-sided vision to collaboration's outcome (less behavioral
7 15 Ch17 attention to partner's interests)
their managers and happen due to the challenges
inattention to the interests of other 6 13 Ch18 Lack of trust in relationships
partners or the lack of trust among them. 28 8 Ch19 Abuse of the capabilities of partners
human challenges refer to problems in Challenge of new people's entrance (resistance
24 32 Ch20
the interactions of human resources that of human resource with collaboration)
are active in partners, including 16 22 Ch21 Human resource changes(especially key people) human
challenges in the internal interaction of Lack of specific team and organizational challenges
members of each partner or problems in 19 6 Ch22 structure to achieve goals
the interactions of members of various 12 27 Ch23 Time to make internal decisions
firms in collaboration with each other.
33 21 Ch24 Lack of familiarity with design and production
Inability to implement technology in industrial
27 7 Ch25 scale
all identified challenges in technological 9 30 Ch26 Low technology absorption capacity in partner
challenge are related to technology (that Being time-consuming the proof of technological
collaboration has done around 17 1 Ch27 claim technologic
development, commercialization or al
21 25 Ch28 Facing people that have different technology challenges
exchange it). Some of these technological
Lack of familiarity with technological
challenges are limited to small firms, and 3 3 Ch29 collaboration
some of them are found in large firms.
2 26 Ch30 Threat of disclosing the competitive advantage
Lack of recognition about the capabilities of each
14 18 Ch31
other
legal challenges are infrastructural, legal Lack of policy-makers and government's
13 12 Ch32 familiarity with collaboration
and emerging from legal and governance
institutions, and affect any kind of legal
1 17 Ch33 Lack of intellectual property mechanism
technological collaboration due to their challenges
Lack of professional reference to solve conflicts
infrastructure nature. 5 11 Ch34 and disagreements
Here, the technological challenges were identified as axial categories and are at the heart of the
model. Other challenges somehow play an important role in relation to these axial challenges and
ultimately cause them to emerge. Based on this model, the geographical, organizational and cultural
barriers that occur more in the finding of partners and forming of technological collaboration, are
productive and provide the basis for creating operational challenges, and operational challenges lead
to technological challenges. In this way, while human and behavioral challenges appearance, the
emergence of technological challenges from operational challenges increase, and ultimately, legal
challenges will have an impact on the formation of operational and technological challenges due to
their infrastructure role. The operational, technological, human, behavioral, and legal challenges
occur more in the performing and implementation of technological collaboration.
Here it is necessary to explain that the geographical, organizational and cultural barriers arising from
the differences between the partners of technological collaboration and have the role of the agent and
basis for operational challenges. These differences may include differences in geographical region,
internal culture, internal values, strategy, business visions, missions, goals of different partners of
the technological collaboration. Each of this three categories can lead to two general conclusions.
First, the lack of formation of technological collaboration and the challenge of lack of successful
experience of technological collaboration in the members, and second the failure to achieve planned
objectives for the forming of technological collaboration and failure to fulfil obligations of partners.
These two results emerge as operational challenges. By emergence of operational challenges, the
initial objectives of technological collaboration forming (which are technological objectives and
REFERENCES
Akdoğan, A.A., Cingšz, A., 2012. An Empirical Study on Determining the Attitudes of Small and Medium Sized
Businesses (SMEs) Related to Coopetition. Procedia - Soc. Behav. Sci. 58, 252–258. https://doi.
org/10.1016/j.sbspro.2012.09.999
Ansari, M.F., Kharb, R.K., Luthra, S., Shimmi, S.L., Chatterji, S., 2013. Analysis of barriers to implement solar power
installations in India using interpretive structural modeling technique. Renew. Sustain. Energy Rev. 27,
163–174. https://doi.org/10.1016/j.rser.2013.07.002
Birkinshaw, J., Bessant, J., Delbridge, R., 2007. Finding, Forming, and Performing: Creating Networks for Discontinuous
Innovation. Calif. Manage. Rev. 49, 67–84. https://doi.org/10.2307/41166395
Boyatzis, R.E., 1998. Transforming qualitative information: Thematic analysis and code development. sage.
Cagliano, R., Chiesa, V., Manzini, R., 2000. Differences and similarities in managing technological collaborations in
research , development and manufacturing : a case study.
Chen, K., 2017. Do research institutes benefit from their network positions in research collaboration networks
with industries or / and universities ? Technovation 1–20. https://doi.org/https://doi.org/10.1016/j.
technovation.2017.10.005
COY, S.P., SHIPLEY, M.F., OMER, K., KHAN, R.N.A., 2007. FACTORS CONTRIBUTORY TO SUCCESS: A
STUDY OF PAKISTAN’S SMALL BUSINESS OWNERS. J. Dev. Entrep. 12, 181–198. https://doi.
org/10.1142/S1084946707000617
Darabi, F., Clark, M., 2012. Developing business school/SMEs collaboration: the role of trust. Int. J. Entrep. Behav. Res.
18, 477–493. https://doi.org/10.1108/13552551211239500
Evans, P., Wolf, B., 2005. Collaboration Rules. Harv. Bus. Rev.
Fiaz, M., Naiding, Y., 2012. Exploring the Barriers to R&D Collaborations: A Challenge for Industry and Faculty for
Sustainable U-I Collaboration Growth. Int. J. U- E-Service, Sci. Technol. 5, 1–15.
Glaser, B. and Strauss, A., 1967. The Discovery of Grounded Theory Strategies for Qualitative Research.
Hanna, V., Walsh, K., 2008. Interfirm Cooperation among Small Manufacturing Firms. Int. Small Bus. J. 26, 299–321.
https://doi.org/doi.org/10.1177/0266242608088740
Hemetsberger, A., Reinhardt, C., 2009. Collective Development in Open-Source Communities: An Activity
Theoretical Perspective on Successful Online Collaboration. Organ. Stud. 30, 987–1008. https://doi.
org/10.1177/0170840609339241
Hoffmann, W., Schlosser, R., 2001. Success factors of strategic alliances in small and medium-sized enterprises: An
empirical survey. Long Range Plann. 34, 357–381.
Karlsson, J., Booth, S., Odenrick, P., 2007. Academics’ Strategies and Obstacles in Achieving Collaboration between
Universities and SMEs. Tert. Educ. Manag. 13, 187–201. https://doi.org/10.1080/13583880701502141
Kshetri, N., Schiopu, A., 2007. Government Policy, Continental Collaboration and the Diffusion of Open Source Software
in China, Japan, and South Korea. J. Asia-Pacific Bus. 8, 61–77. https://doi.org/10.1300/J098v08n01_06
Lindman, J., Rajala, R., 2012. How Open Source Has Changed the Software Industry : Perspectives from Open Source
Entrepreneurs. Technol. Innov. Manag. Rev. 5–11.
Mohr, J., Spekman, R., 2016. Characteristics of Partnership Success : Partnership Attributes , Communication Behavior
, and Conflict Resolution Techniques Author ( s ): Jakki Mohr and Robert Spekman Published by : Wiley
Stable URL : http://www.jstor.org/stable/2486868 Accessed : 13-0. Strateg. Manag. J. 15, 135–152.
Muegge, S., 2013. Platforms , Communities , and Business Ecosystems : Lessons Learned about Technology
Entrepreneurship in an Interconnected World Platforms , Communities , and Business Ecosystems. Technol.
Innov. Manag. Rev. 5–15.
Mueller, C., Herstatt, C., 2000. Interfirm cooperation: a brief overview of current theoretical findings and issues for
future research. Int. J. Hum. Resour. Dev. Manag. 1, 48–67.
Muscio, A., 2007. THE IMPACT OF ABSORPTIVE CAPACITY ON SMEs’ COLLABORATION. Econ. Innov. New
Technol. 16, 653–668. https://doi.org/10.1080/10438590600983994
Nan, N., Kumar, S., 2013. Joint effect of team structure and software architecture in open source software development.
IEEE Trans. Eng. Manag. 60, 592–603. https://doi.org/10.1109/TEM.2012.2232930
Ramesh, A., Banwet, D.K., Shankar, R., 2010. Modeling the barriers of supply chain collaboration. J. Model. Manag. 5,
176–193. https://doi.org/10.1108/17465661011061014
Richbell, S.M., 2006. Owner-managers and Business Planning in the Small Firm. Int. Small Bus. J. 24, 496–514. https://
doi.org/10.1177/0266242606067275
Sarker, S., Sarker, S., Schneider, C., 2009. Seeing Remote Team Members as Leaders: A Study of US-Scandinavian
Teams. IEEE Trans. Prof. Commun. 52, 75–94. https://doi.org/10.1109/TPC.2008.2007871
Scaringella, L., Burtschell, F., 2017. The challenges of radical innovation in Iran: Knowledge transfer and absorptive
capacity highlights — Evidence from a joint venture in the construction sector. Technol. Forecast. Soc.
Change 122, 151–169. https://doi.org/10.1016/j.techfore.2015.09.013
Schøtt, T., Jensen, K.W., 2016. Firms’ innovation benefiting from networking and institutional support: A global analysis
of national and firm effects. Res. Policy 45, 1233–1246. https://doi.org/10.1016/j.respol.2016.03.006
Shamsuzzoha, A., Kankaanpaa, T., Carneiro, L.M., Almeida, R., Chiodi, A., Fornasiero, R., 2013. Dynamic and
collaborative business networks in the fashion industry. Int. J. Comput. Integr. Manuf. 26, 125–139. https://
doi.org/10.1080/0951192X.2012.681916
Shane, S., Venkataraman, S., 2000. The Promise of Enterpreneurship as a Field of Research. Acad. Manag. Rev. 25, 217.
https://doi.org/10.2307/259271
Skerrett, I., 2011. Best Practices in Multi-Vendor Open Source Communities. Open Source Bus. Resour. 11–15.
Smith, D., Alshaikh, A., Bojan, R., Kak, A., Kohe, J.M., 2014. Overcoming Barriers to Collaboration in an Open Source
Ecosystem. Technol. Innov. Manag. Rev. 4, 18–27.
Strauss, A., Corbin, J., 1998. Basics of qualitative research: Procedures and techniques for developing grounded theory,
ed: Thousand Oaks, CA: Sage.
Vangen, S., Huxham, C., 2003. Nurturing Collaborative Relations. J. Appl. Behav. Sci. 39, 5–31. https://doi.
org/10.1177/0021886303039001001
Yih-Tong Sun, P., Scott, J.L., 2005. An investigation of barriers to knowledge transfer. J. Knowl. Manag. 9, 75–90.
https://doi.org/10.1108/13673270510590236
APPENDIX
Ranks of small Ranks of big Test Statistics of small firms Test Statistics of big firms
Mean Rank Mean Rank N 140 N 54
Ch01 20.90 Ch01 9.06 Chi-Square 1278.804 Chi-Square 552.522
Ch02 9.08 Ch02 8.36 df 33 df 33
Ch03 14.05 Ch03 16.60 Asymp. Sig. .000 Asymp. Sig. .000
Ch04 13.52 Ch04 15.19 a. Friedman Test a. Friedman Test
Ch05 15.69 Ch05 14.06
Pushkar S. Narsikar
NITIE, Mumbai
E-mail: pushkar.narsikar.2020@nitie.ac.in
Vivekanand B. Khanapuri
Faculty, Engg Tech & Project Mgt, NITIE, Mumbai
E-mail: vbkhanapuri@nitie.ac.in
Shivesh Doharey
NITIE, Mumbai
E-mail: shivesh.doharey.2020@nitie.ac.in
Abstract
Disruptive technologies shift the established systems and processes and have the potential to increase productivity,
create wealth and economic well-being. These technologies create market segments which are small initially and
have not been targeted by the existing companies. Startups are leveraging these types of innovations and are giving
tough fight to the traditional organizations. These organizations need to project themselves as the technology
leaders, else there is a constant threat for them to be thrown out of the market by new disruptors. This paper
investigates technology used by a startup which has the potential to disrupt existing business models.
This paper adopts a case-based approach which is a startup along with specific comparison with those
organizations which are still relying on traditional methods. For comparison purpose, Paytm is taken as the subject
which is leveraging on digital technologies to break the conventional practices followed by brick and mortar
banking system.
Analysis is done on how Paytm has grown in an accelerated manner by taking advantage of penetration of financial
services in India. Favourable ecosystems in the form of government support and markets available in countries like
India has definitely fuelled the growth of Paytm. Research also analyses the funding opportunities which have been
tapped by Paytm from giant foreign investors like Alibaba group, SoftBank and Berkshire Hathaway.
These disruptors do not rely only on opportunity discovery, but also on opportunity creation. They work on
combining discovery and creation to tap wide range of possibilities. For example, Paytm has become a synonym
for online money transactions. It is also found that these entrepreneurial innovators make optimum use of available
resources for their start-ups to create multiple segments of customers. Paytm is also trying to venture into the field
of investment banking and fund management for profitability and sustainability of its business.
In conclusion, startups with disruptive technologies can create business models which will contribute towards the
overall economic development.
Keywords: Disruptive Technology, Startups, Banking system
1. Introduction
The present period is going into a different space of payments by usage of e-wallets loaded up with
promotional coupons and discounts. Eliminating the paper from business places and also promoting
the cashless transactions are some of the important objectives of the Digital India programme
launched by the Department of Electronics and Information Technology. Digitization comes with
many advantages such as the transparency in money exchanges, minimization of parallel economy
and enhancement in ease of doing business. Field of digital payments has recently seen many
changes. Many e-wallets and payment gateways have started to make their own mark. Government
has also started many Unified Payments Interfaces and BHIM application for smooth change to
cashless economy. The activities undertaken by the administration and RBI have brought about
more digital penetration of financial services and cashless transactions.
Major player which emerged taking advantage of the changing banking ecosystem was the PayTM.
It is headquartered in National Capital Region and is headed by Mr. Vijay Shekhar Sharma.
Company has transformed itself from being just a mobile recharge website to becoming a leading
e-commerce platform. The PayTM wallet now has more than 200 million authenticated user base.
The company now allows its users to book movie, flight, train and bus tickets, payment for the utility
bills, insurance premiums, interests and engages in many other financial services. Major investors in
Paytm include Alibaba group, Softbank, SAIF partner and Sapphire venture.
2. Literature Survey
As per Das et al. (2015), online business is in the rapid phase of development in Indian markets.
Use of internet is expanding stage by stage in our country. Web users are developing so quickly that
soon Indians will top the list. Right now, India is positioned second after the USA. The nation has
managed to achieve a growth rate of 9142.5% from 2000 to 2016 in the number of internet service
users. But there is a great potential of improvement for the online market to grow in the future in
India as still just 36.5% of the total population uses internet to some extent. Trade at the global
level is rapidly growing and remote speculators are finding the importance of putting resources
into e-commerce segment. This is the reason why investors like Alibaba group and SoftBank have
invested a lot in PayTM.
As per Chanana et al. (2012), after the internet got commercialised, there has developed another
mechanism of trade famously known as e-commerce. The companies involved in e-commerce have
different business models such as B2B, B2C, B2G, C2C, B2G, C2C (B=Business, C=Consumer,
G=Government) and mobile commerce. PayTM has its presence in each category. CAGR of around
60% has been estimated for Indian e-commerce sector by the leading advisory and research firm,
Forrester. This shows that PayTM has targeted the correct set of customers at the perfect time.
PayTM’s plan of action for business expansion is much synchronized with the present monetary
circumstances in India and they are developing themselves without any help from the external forces.
Ghuman et al. (2016) has done a case study for finding out usage of wallets like Freecharge and
PayTM. Case study investigates the details of past performance and present condition of PayTM.
One97 communication, under which the PayTM operates, had initiated the mobile recharge platform
and now it has successfully managed to be a leading e-commerce company in India. Diversification
in terms of product portfolio has helped it to be used by general consumers. Consumers from both
rural and urban parts of the country use the platform for various purposes. Therefore, PayTM has
grabbed the spot in the leading seven electronic commerce organizations in India having valuation
of more than one billion dollar.
3. Evolution of PayTM
IT sector has gained grounds at a very fast rate and will definitely continue to grow with the same
pace. The use of cashless business transactions has been favoured by the government to have
transparency and eliminate corruption. Digital India program has been initiated by the Indian
government for enhancing the digital penetration. Government has been trying to provide favourable
ecosystem for the startups like PayTM to grow. PayTM was started as a mobile and DTH recharge
platform. Later on, it started adding different products like ticket booking, money transfer, online
shopping facility etc on its platform. From the start itself, PayTM was growing at a good rate.
Boost to the development of PayTM was given by the government’s move of demonetization. PayTM
took opportunity of the situation and promoted itself very aggressively for attracting customers to do
cashless transactions on its platform.
PayTM has been continuously launching new products to have a good customer retention rate and
it has successfully managed to retain major fraction of customers. Consumers now do numerous
e-exchanges each day and this has turned into a typical component for nearly everybody in the
nation. PayTM is one of the pioneers in this area in India. Small vendors such as vegetable sellers
are also accepting transactions done using PayTM’s platform. PayTM has focussed on giving easy
to use new technological solutions to the involved customer base of merchants, businesses and
individual consumers. Recently PayTM has started the operations of its newly launched payments
bank and is trying to tap more opportunities in the financial ecosystem. It is also creating its own
space in the field of wealth management and insurance sector. This diversification into various fields
has paved way for PayTM to have rewarding future.
4. Revenue Model
One97 communication is the parent company of PayTM and has a lot of sources for generating
the revenue with e-commerce as the most important one. PayTM has launched several platforms
like online travel agency bookings, e-wallets, online money transfer, ticket bookings and utility bill
payments for revenue generation. A basic commission framework is used by PayTM to generate
revenue from its diversified product portfolio. The marketplace provided by PayTM is utilized by
sellers to make their products available to the right consumer. Consumers compare and choose
products from different alternatives present on the online marketplace, then they look for the
availability of coupons, product specific discounts and cashbacks before placing the final order.
Shipment of the ordered product starts after the order is confirmed by the seller. The seller is eligible
to get the agreed price of that product. Sellers have to pay PayTM the commission for using its
platform for displaying their products. PayTM may also demand delivery fees which accommodate
convenience and product listing costs if applicable.
As earlier stated, company has payment gateways for making payments towards utility bills,
insurance premiums, mobile top-ups etc. PayTM charges commission on every transaction that
takes place on its payment gateways. People have started giving preference to the usage of PayTM
over the conventional methods of money transactions. They are attracted more by the promotional
discounts, cashbacks and coupons which the company offers time to time on various platforms.
PayTM has tied up with Uber and IRCTC and hence the money stored in its e-wallet can be directly
used for paying money towards the taxi fare or booking train ticket. Day by day the average amount
of money kept by a user in the wallet is increasing resulting in more interest generation for PayTM.
It has recently launched payments banks with various services provided to the account holders which
earn interest on deposits and charges on services.
Started as a digital payments startup, PayTM over the past two years has forayed into various
segments integrating multiple platforms in the process. Supported by two major global aggregates
SoftBank and Alibaba, PayTM Life Insurance Corporation Ltd and PayTM General Insurance
Corporation Ltd have been incorporated by PayTM. As per IBEF, Insurance penetration in India
is as low as 4%. Government has recently proposed National Health Protection Scheme and also
various government backed policies are raising awareness at an increased pace. PayTM, as it did
with mobile based digital payments solution, is currently prepared to tap the opportunities in this
sector as well. The Indian government recently increased the Foreign Direct Investment limit in the
Insurance sector from 26% to 49% under the automatic route which would additionally help draw
in investments in this segment. PayTM has recently started PayTM Money Ltd to cover the wealth
management sector and is planning to add more investment offerings going forward.
7. Challenges Ahead
PayTM is known to the masses because of its cashless transaction gateway. Seeing its success in
the Indian market, many big players are trying to venture into this segment. The biggest threat to
PayTM is from Whatsapp. It has the largest customer base in India and is currently running a pilot
of cashless transactions through its application. Many other players like Google, Mobikwik, State
Bank, ICICI etc have started their own mobile wallets and are grabbing market share of PayTM at
a fast rate.
Also there is a competition to mobile wallets from credit and debit cards. There is a limit to the
transaction amount on mobile wallets which is much lesser than that in the case of credit or debit
cards. So, this is creating a strong roadblock for growth of mobile wallet adoption.
PayTM has started the payments bank to provide enhanced banking experience to its customers.
But the limitations imposed by the RBI on the working of these banks are becoming a hurdle in their
acceptance by public. There is a limit on amount that can be deposited in these banks and they can’t
engage themselves into any kind of lending business. So, the government policies will play a big
role in the payments bank space.
8. Conclusion
Disrupting the business model with the new technology is difficult and sustaining in the same
business is even more difficult. Life cycle of a product or service in the technology space is very
small. This makes it difficult for any startup to do sustained business for longer duration. So it is
necessary to bring new innovations to remain in front of competitors. Giving the end user a different
experience altogether is very important. PayTM along with other players like Flipkart, Ola, Zomato
has been successfully bringing in new dimensions to its business for sustainability. PayTM has
certainly changed the way of consumer transactions by providing alternative to carrying cash. It
is trying to expand its business in the segments such as wealth management, insurance and retail
banking. The traditional banking facilities are being disrupted by PayTM with the use of digital
technologies. It has certainly utilised the increasing digital penetration. Government policies have
helped to some extent in its growth. But there are many challenges ahead in the form of competition
from big players, restrictions by RBI, security threats in the cyberspace.
References
Das, K. and Ara, A., 2015. Growth of E-Commerce in India. Growth, available at: http://ijcem. in/wp-content/
uploads/2015/08/Growth_of_E_Commerce_ in_India. pdf (accessed 9 December 2015).
Chanana, N. and Goele, S., 2012. Future of E-commerce in India. International Journal of computing and business research.
Ghuman, K. and Srivastava, C.S., Recharging: The Right Way, a case study on Freecharge and PayTM, IOSR Journal
of Business and Management.
Rathore, H.S., 2016. Adoption of digital wallet by consumers. BVIMSR’s journal of management research, 8(1), p.69.
Aparna, R.R., Ostwal, T. and Sreekumar, N., 2015. Overview of Digital wallets in India. International Journal of
Advanced Research in Computer Science, 6(8).
Mandaliya, M.P., 2014. Mobile Commerce: The New Era of Shopping. International Journal of Innovations in
Engineering and Technology (IJIET), 4(4).
Shamsher Singh, Study of Consumer Perception Of Digital Payment Mode, Journal of Internet Banking and Commerce,
December 2017, vol. 22, no. 3
Pushpa, S. and Shettar, R., The Changing Trends in Payments: An Overview, International Journal of Business and
Management Invention.
Patil, P.A., 2017. Has Demonetization Really Helped in Growth of PayTM?, International Journal of Advance Research,
Ideas and Innovations in Technology, 3(6), pp.356-358.
Dixit, P., Prakash, A. and Tiwari, T., Heuristic Analysis of “Growth of PayTM”.
Sanjay Gupta (2018, July 16), The Complex Architecture behind PayTM’s simplicity, Mint, www.livemint.com
www.rbi.org.in
www.paytm.com
Sung-Goo Han
Korea Institute of S&T Evaluation and Planning (KISTEP), Republic of Korea
E-mail: hsg@kistep.re.kr
Abstract
The World Economic Forum (WEF) has pointed the dual use dilemma of biotechnology innovations through a
Global Risks Report and discussed the risk reduction and opportunity capture of biotechnology in relation to the
Fourth Industrial Revolution (4IR).
Recent emerging biotechnologies, such as synthetic biology, gene editing and nano-biotechnology, as well
as open source software and hardware, are concerned about the ease and sophistication of life manipulation and
generation at low cost. These explosive synthetic biology and gene editing developments are also concerned with
the possibility of dual use with biological weapons, which may be intentional or unintentional.
The technological innovation of gene synthesis is rapidly advancing the synthetic biology that can dramatically
reduce the costs and increase the accuracy and enable genome synthesis. Synthetic biology can revolutionize the
function of living organisms by engineering and synthesizing genes as parts with one unit. The entire genome
of the microbial organism was synthesized from small pieces, reaching the level at which other microorganisms
were transferred and operated. Synthetic biology can be used to produce microorganisms that produce biofuels,
medicines, or organic substances. On the other hand, the possibility of creating new pathogens with various risk
characteristics as well as gain of function is increased for dual use.
The research objective is to suggest the policy directions for risk management of emerging biotechnologies,
including synthetic biology and gene editing and so on. The approach taken in this paper combined with qualitative
and quantitative analysis methods, such as bibliographic analysis, peer reviews and in-depth interviews.
We analyzed the policy formation, policy implementation and policy coordination for risk management on emerging
biotechnologies and suggested science and technology-based policy directions to increase resilience to risk
management in these areas.
We hope this paper has been helpful to understand and overcome the risks of emerging biotechnologies.
Keywords: Biotechnology Innovation, Dual use, Synthetic Biology, Biosecurity, Science and Technology Policy
1. Introduction
Recent convergence and innovation in biotechnology field is accelerating the rise of the bioeconomy
era in which biotechnology achieves human well-beings and economic growth at the same time.
In the bioeconomy era, biotechnology is not only the creator of new industries, but also the enabler of
new economic changes, such as aging, infectious diseases, safe food and social problems. Therefore,
some argue that biotechnology field should be expanded from the research and industry sector to the
overall economy.
In addition, synthetic biology, which is able to synthesize genes in genetic synthesis, is rapidly
developing due to the dramatic decrease in costs and increased accuracy through gene synthesis.
Synthetic biology sees the gene as a single unit and engineering synthesis, combined to control the
function of life in innovative ways, synthesizing the entire genome of a microorganism from a small
piece to move it to another microbial. Synthetic biology has a variety of uses, such as producing
biofuels, medicines and organic materials.
The world has recently experienced many human-related biosecurity risk factors and shared
knowledge in the process of realizing the bioeconomy through biotechnology innovation.
Examples include international cooperation to prevent the spread of Ebola (2014), the Obama
administration’s establishment of national strategies for antibiotics-resistant bacteria (2014), the
MERS outbreak (2015), the Global Health Security Agenda (GHSA) high-level meeting (2015) and
food security.
These global risks are multi-layered and complex issues, emerging security issues of a new concept
that cannot be understood by the perspective and concept of traditional security. Emerging security
in the context of a complex system refers to a phenomenon in which micro-interactions within the
system increase quantitatively and change qualitatively which is a serious threat to national security
at the macro level.
Meanwhile, emerging security threats have an intensive nature of scientific, technology, knowledge
and information, which is why they are increasingly related to science and technology. The threat
in the field is not generated solely by human actors, but by the nature of the variables themselves
and in solving emerging security issues, the variables are more than just tools used by human actors.
Thus, in order to identify the causes of emerging security threats and prepare solutions, securing the
technology capabilities necessary to break the rising link that micro-safety becomes macro-security
(e.g. innovation and human resources development) is emerging as an important issue.
In this paper, we are going to suggest technology-based policy directions in order to identify the
causes of the threat on emerging biotechnologies and to respond to policy issues of biosecurity.
1.1.1. Parts
Define the DNA fragments as bio-parts, such as promoters (DNA transcription starting points),
genes (fields containing protein information) and terminator (DNA end points), which are functional
basic units of biological systems and artificial life.
1.1.2. Unit
Genetic circuit or artificial biosynthesis path designed to perform functions designed through a
combination of biological parts is defined as a biomechanical device.
1.1.3. System
Predictable artificial biosystems or living organisms produced by combinations and introduction of
various biological devices.
The key to synthetic biology is how to design, build, connect and control the necessary biomechanical
components. In order to design and manufacture bio parts, devices and systems, it is essential to link
various technologies such as genetic analysis, system biology, genetic synthesis and genetic editing
techniques that enable their implementation.
1.2.1. Bio-CAD
In order to create new organisms or biological devices using synthetic biology, it is necessary to build
an optimized metabolic circuit through standardised biological components and their appropriate
combination.
1.2.2. Biofoundary
Biofounder allows thousands of different kinds of genes and biomaterials to be tested in a variety
of climate environments to quickly build the most complete biological system, opening up the
possibility of unimaginable organic composition
1.2.7. Biocontamination
There are still many issues to apply artificial life, redesigned by synthetic biology, to the diagnostic
and therapeutic fields. If artificial life spreads out, it could disrupt the ecosystem or become a deadly
disease through unexpected evolution. The development of technologies for biosafety and biological
containment is also considered important because there is a possibility that artificial life forms could
be used as biological weapons.
1.3. Methodology
This research was conducted in five main sections. First, we began with a review of the extant literature
on biosecurity, focusing on earlier work regarding the implications of technological change on
biosecurity. Second, we selected interview subjects in relevant fields, interest in problems involving
the nexus between biotechnology and biosecurity. Third, we checked our initial conclusions with
our original interview subjects and then consulted a wide variety of expert sources knowledgeable
about biotechnology and/ or biosecurity. Finally, we solicited feedback on preliminary versions of
our analysis and conclusions through presentations at conferences.
In addition, we visited overseas policy research institutes for benchmarking foreign cases, such
as Belfer Center for Science and International Affairs of Harvard Kennedy School, Center for
International Studies (CIS), MIT and International Genetically Engineered Machine (iGEM)
Foundation and conducted expert interviews.
2. Main Findings
In addition to the innovation of biotechnology fields, including synthetic biology, the chance to
create new pathogens with different risk characteristics as well as gain of function is increased and
another risk is cost reduction and convenience-induced de-skilling. The ability to synthesize DNA or
order DNA online at a relatively low price and the ability to equip relevant experimental equipment
makes it possible for amateurs and citizens to manufacture biological weapons (loana pusca, 2016)
and H5N1 avian virus to be reproduced by amateurs.
The concern is that these explosive developments in synthetic biology also amplify the potential for
dual use as biological weapons that may be intentional or unintentional.
Threat delivery paths, threats raised by actors and responders (security providers) and relevant
governance are classified into the following types. First, the natural occurrence of large-scale
infectious diseases that potentially disrupt the normal functioning of society is a matter of biosecurity.
Second, bioterror refers to biological attacks by non-state actors and has been recognized as a
biosecurity issue since the early 1990s. Third, biological weapons are the oldest biosecurity issue
with biological weapons, where national actors use pathogenic microorganisms for military attacks.
Potential gain-of-function
Export controls
3. Conclusion
This paper considered the cases that have taken place in related organizations and facilities
and in-depth analysis of the current status of biotechnology development and utilization of
synthetic biology.
The goal is to make biosecurity-related experience, documents and data more widely available to
scientific experts, policymakers and technical communities to help keep biotechnology, particularly
synthetic biology. The main targets of biosecurity are living, biological systems, genes or materials
derived from humans, animals and plants and there are many similarities in the view of science and
technology. In addition, there are many common factors in the detailed policy areas of biosecurity,
including the presence of pathogens as the first cause of security issues.
Traditionally, the three policy areas of biosecurity are infectious diseases, bioterrorism and biological
weapons. Synthetic technology operates cross-sectionally in these three areas and we would like to
propose a biosecurity policy directions for the development of synthetic biology.
First, since Korea is highly dependent on foreign countries and is open to some extent exposed to
biosecurity threats such as synthetic biology, it is necessary to implement biosecurity policies on a level
equal to foreign diplomacy and security policy. Security threats posed by anthrax attacks and epidemics
of infectious diseases in the 21st century no longer leave biosecurity issues as low politics issues.
The issues of biosecurity should be included in bilateral and regional diplomacy and should be involved
in global discussions. Therefore, in recognizing and responding to security issues such as synthetic
biology, infectious diseases, bioterrorism and biological weapons as security threats, individual state
efforts alone are not enough and response and cooperation are essential at the global level.
Second, in order to identify the causes of threats in biosecurity such as synthetic biology and to
come up with solutions, it is necessary to secure technological capabilities, i.e. to innovate and foster
human resources. Threats in biosecurity are generated not only by human actors but also by the
variables themselves and scientific variables are more than just tools used by human actors to solve
problems. Therefore, strengthening the role of science and technology should be a priority in order
to accurately understand the threats posed by various issues of biosecurity, such as synthetic biology.
Third, it is necessary to understand the characteristics of biosecurity, such as synthetic biology and to
seek new security governance to suit them. The establishment of governance regarding biosecurity
requires strengthening mutual functions such as the Presidential Advisory Council on Science
and Technology, the special committee under the Biotechnology Support Act and the Council for
Comprehensive Biotechnology Policy. Some of the issues will need to be discussed with the National
Bioethics Committee.
Fourth, there is a need to carry out a regular biosecurity policy study, with continuous innovation
in synthetic biology represented by de-skilling and the role of game changer. While the focus has
been on biotechnology innovation and development, it is time to form and operate a joint forum
with technologists and biosecurity policy experts, such as the case of MIT and Harvard University,
in which the field of synthetic biology is accumulated by world-class technological achievements.
Fifth, there is a need to expand the biological industry base to strengthen biodefense capabilities.
This will be a key factor in the development and stockpiling of vaccines and treatments and
enhancement of diagnostic capabilities, so the domestic production and stockpiling of vaccines
and treatments for biological agents that can be used as biological weapons should be increased.
This should increase the strategic deterrent capability of the actors who can cause biological warfare.
In addition to the common policy directions for the above synthetic biology, the policy directions for
the relevant detailed policy domains are as follows:
In case of bioterrorism, first, the related laws are enacted or improved accordingly, second,
the Ministry of National Defense or the Ministry of Health and Welfare need to integrate
counter-terrorism services to maximize response capabilities and third, it is necessary to improve
response methods such as procedures and tips for responding to bioterrorism.
For biological weapons, first of all, the relevant laws need to be supplemented in order to effectively
respond to a bio-crisis in the Ministry of National Defense. Second, it is necessary to establish a
biodefense-centered organization within the ministry, establish and announce key implementation
agendas and measures for bio defense, establish a biological defense procurement system, establish
and operate a national R&D roadmap. Third, it is necessary to expand the capabilities of the Armed
Forces Medical Command and the Armed Force CBR Defense Command to effectively respond
to bio crisis situations and to reestablish the cooperative system with the outside of the Ministry of
National Defense.
References
Carlson, Robert H., (2010), Biology is Technology: the Promise, Peril and New Business of Engineering Life. Harvard
University Press.
Filder, David. P. and Gostin, L.O., (2008), Biosecurity in the Global Age: Biological Weapons, Public Health and the
Rule of Law. Stanford University Press.
iRUNWAY, (2018), CRISPR: Global Patent Landscape.
Katona, Peter and Sullivan, John P. and Intriligator, Michael D., (2010), Global Biosecurity: Threats and Responses. Routledge.
Kim, Hyun-Kyung and Philipp, E. and Chung H., (2017), North Korea’s Biological Weapons Program: The Known and
Unknown. Belfer Center for Science and International Affairs, Harvard Kennedy School.
National Academy of Sciences, (2010), Understanding Biosecurity: Protecting Against the Misuse of Science in Today’s
World. NAS.
National Research Council, (2004), Biotechnology Research in an Age of Terrorism. National Academies Press.
National Science and Technology Council, (2016), A 21st Century Science, Technology and Innovation Strategy for
America’s National Security. NSTC.
NIAID, (2007), NIAID Strategic Plan for Biodefense Research 2007 Update. NIAID.
OECD, (2009), The Bioeconomy to 2030: designing a policy agenda. OECD.
Puscas, Ioana, (2016), Synthetic Biology and ‘Amateur Science’: Dual-Use and Challenges of Regulation. Geneva
Centre for Security Policy.
Tucker, Jonathan B., (2012), Innovation, Dual Use and Security: Managing the Risks of Emerging Biological and
Chemical Technologies. MIT Press.
WHO, (2007), World health report 2007: A safer future, global public health security in the 21st Century. WHO.
World Economic Forum, (2015), Global Risks Report 2015. WEF.
World Economic Forum, (2016), Global Risks Report 2016. WEF.
World Economic Forum, (2017), Global Risks Report 2017. WEF.
World Economic Forum, (2018), Global Risks Report 2018. WEF.
Bugl, et al. (2009), DNA Synthesis and Biological Security. Nature Biotechnology, 25(6).
Han, Sung-Goo et al. (2018), Development of Synthetic Biology and Directions of Biosecurity Policy. KISTEP Issue
Paper, 2018-39.
Han, Sung-Goo et al. (2018), Biotechnology Innovation, Dual Use and Biosecurity. Korea Association for Public
Studies Conference.
Han, Sung-Goo et al. (2018), Global Risks, Biotechnology and the Future of Biosecurity. IAMOT 2018
Proceedings.
Han, Sung-Goo et al. (2016), Rise of Biosecurity and the Directions of Science and Technology Policy: Focusing on
Health Security and Food Security. KISTEP Issue Paper, 2016-15.
Katherine, F.S., et al. (2014), Global rise in human infectious disease outbreaks. Journal of the Royal Society Interface,
11:20140950.
Kim, Sangbae, (2016), Emerging Security and Meta-governance: Theoretical Understanding of the New Security
Paradigm. Journal of Political Science Studies, 50(1), 75-104.
Min, Byoung Won, (2007), Extending the Concept of Security in the Post-Cold War Era and the Network Paradigm.
Journal of National Defense Studies, 50(1), 23-55.
Ng, Nora Y. and Ruger, Jennifer P., (2011), Global Health Governance at a Crossroads. Global Health Governance, 3(2).
Reeves, R.G., et al. (2018), Agricultural Research or a New Bioweapon System?. Science, 362(6410), 35-37.
Smith KF et al. (2014), Global rise in Human Infectious Disease Outbreaks. J.R. Soc. Interface, 11:20140950.
Belfer Center for Science and International Affairs of Harvard Kennedy School, https://www.belfercenter.org/project/
managing-microbe.
Shivesh Doharey
NITIE Mumbai, India
E-mail: shivesh.doharey.2020@nitie.ac.in
Vivekanand B. Khanapuri
Faculty, Engg. Tech & Project Mgt NITIE Mumbai, India
E-mail: vbkhanapuri@nitie.ac.in
Pushkar S. Narsikar
NITIE Mumbai, India
E-mail: pushkar.narsikar.2020@nitie.ac.in
Abstract
Technological developments in the field of healthcare management has changed dramatically across the different
stages of patient healthcare right from diagnostics, clinical, operative and post-operative stages.
Globally, technology in healthcare has transformed rapidly with the introduction of technologies like magnetic
resonance imaging scanners, radiotherapy, Blood flow restriction training, Teletherapy, Precision meds for cancer
treatment, applications of AI in health sciences, Internet of Medical Things (IoMT) etc. It is also seen that hospitals
are adopting the new medical technologies and government initiatives to standardize Electronic Medical Records
(EMR) is facilitating faster adoption.
These new initiatives along with the new medical devices will help the hospitals to align with the 21st century
customers who believe in the fast delivery of services. However, the customers are exploring new technologies
specially wearables and smart sensors used for suggesting preventative strategies for the customers. However, in
India, the adoption of these healthcare technologies is still in the nascent stage. The objective of this paper is to
find the level of adoption of new healthcare technology like clinical wearables and sensors especially among the
Heath concours youth in developing countries. Clinical wearables are biosensors for monitoring blood pressure,
heart rhythm, respiratory rate, blood oxygen saturation, temperature, eye pressure, glucose level, brain waves,
sleep metrics, etc. These can be used for monitoring in patients and for remotely monitoring patients after they are
discharged from hospitals or under home care.
As most of the wearables are available through e-commerce. Market research of purchase level, product availability
customer on e-commerce platforms and analysis is used to find the level of adoption of such technology.
Also, the researchers propose to conduct interviews with existing users of clinical wearables and sensors and
identify the key issues with the adoption of technology and understand the impact on customer satisfaction.
Keywords: Clinical Wearables, Purchase Level, Customer Satisfaction
1. Introduction
Innovation is the most ideal approach to accomplish the vision of an associated medicinal services
environment. Medicinal gadgets in doctor’s facilities/ centers, portable consideration applications,
wearables and sensors are for the most part unique types of innovation that are changing
this environment. These empower parental figures to play out their jobs more effectively via
mechanizing the signing on component, robotizing constant updates of patient vitals and giving bits
of knowledge into early identification of infections. Advancements help to gather, store and offer
basic patient information. By adding an examination layer to this, parental figures can give a vastly
improved investigation of the condition and suggestions to the patient. Man-made intelligence can
help parental figures in the early recognition of infections dependent on specific triggers in vitals.
Indeed, even outside the healing facilities, wearables and savvy sensors can help track persistent
history or any danger to a person, which might be advantageous, particularly to the individuals who
are at a higher hazard, for example, those with diabetes or a past filled with heart assaults. From
basic wellness and pulse screens to shrewd glasses and keen attire, there are a few alternatives for
people to look out for their very own wellbeing parameters to have a solid existence as well as get
master supposition by just imparting these parameters to their guardians.
2. Literature Review
According to article by Jai Prakash Narain in Indian J Community Med on Public Health Challenges
in India: Seizing the Opportunities, the major challenges in healthcare are:
i. The communicable diseases are relied upon to keep on residual a noteworthy
general medical issue in the future representing a risk to global wellbeing security.
ii. Diseases such AIDS, TB, malaria, the communicable disease outbreak will put a
challenge to public health due to which it requires high level of readiness in terms
of detection at earliest stage and fast response.
iii. Nowadays 60% of deaths are caused by the non-communicable diseases. Among all
NCDs, about 80% of all deaths caused due to four diseases namely cancer, diabetes,
heart disease and chronic pulmonary diseases and absence of physical exercises,
hurtful utilization of liquor, specific tobacco use, unfortunate eating regimen are
four regular hazard factors leads to NCDs.
The epidemic progress in these diseases is depend on new hazard factors, for instance, unregulated
urbanization, globalization, changing lifestyle, ecological contamination due to pollution and easy
propagation through media. In addition, wellbeing administrations is not equally accessible to poor
and rural people as easily accessible to rich and urban people. [1]
According to the article published in ICS Irish Computer Society, technologies that will change
healthcare sector are:
2.3. Wearables
One cannot think about health care without Wearable technology in years to come. Be that as it may,
observing wellness is just the start. For example, Michael J. Fox collaborated with Intel to utilize
wearables to discover certain characteristics of Parkinson’s disease.
3. Data Collection
According to the forecast by Gartner, 310 million wearable devices were to be sold worldwide in
2017, an increase of 17% from 2016,. Bluetooth headset sales generate the largest number of units
sold, growing from 150 million in 2017 to a forecast of 206 million by 2021. When it comes to sales,
smart watches lead the way. Sales of wearable devices generated a revenue of $31 billion in 2017,
with smart watches accounting for $9 billion.
Here is MediaPost’s shows the numbers of wearable devices projected to be sold in four years for
different wearable devices. [6]
Source: www.forbes.com
To understand the adoption of wearable, product availability, problems with wearables, following
questionnaire was prepared and surveyed with 21 people of age group 20 to 30 years
i. Do you use any wearables?
ii. Why would you like to purchase wearable?
a. To track general fitness
b. To track specific ailments like heart disease, blood pressure, etc
c. Because you are sport enthusiast
d. Because it is trendy and has aesthetic appeal
e. Because it has many features other than those health concerns
f. Because wearables are used by celebrities and role models
g. Other
iii. Where would you like to purchase it?
iv. What is the product availability?
v. What are the problems with wearables?
vi. How cost of wearables seems to you?
vii. Would you like to suggest your friends to use it?
Given below are the findings from the Survey through google forms
Figure 6: Is it
8. Analysis
Secondary research shows that demand of wearables is likely to increase by up to 411 million and
market share of 32 billion dollar globally in the coming two years. [figure 1]
It is observed that 38.1% people in the survey are using wearables [figure 2], which shows that
wearables are becoming popular in the market. Most of the people are using to track the general
fitness, to track specific ailments and it is trendy and has aesthetic appeal [figure 3]. 95% people
purchased it on e-commerce platform [figure 4], this shows that it is not easily available on retail
outlets, but customers can easily purchase it online, it also shows that wearables are not reachable
to the people of tier 3 cities where the penetration of e-commerce is less. More than 85% people
reported wearables to be either expensive or costly [figure 5]. Product availability is 90% on
e-commerce platform this shows that market is responsive in providing wearables [figure 6,]. 85%
people suggested their friends for using wearables this shows that product will likely to have huge
demand in the future. [figure 7]
Although wearables are appreciable in the market there are few problems which mostly related to
technology error. It may be because it is a new product and need some research and development.
9. Conclusion
Research shows that wearables have appreciable adoption among health-conscious youth.
Adoption is likely to increase in the coming future which shows its market has potential to create
higher revenues for the wearable manufacturer. Increase in the adoption of wearables is a sign that
India will likely to have healthy youth in the coming future.
References
Jai Prakash Narain, (2016), Public Health Challenges in India: Seizing the Opportunities. Indian J Community Med.
2016 Apr-Jun; 41(2): 85–88.
Irish computer Society, Top 10 technologies which will change the healthcare sector from https://www.ics.ie/news/
view/1158
PC Lai, (2017), The literature review of technology adoption models and theories for the novelty technology, Help
University, Malaysia. JISTEM-Journal of Information Systems and Technology Management Vol. 14, No.
1, Jan/Apl, 2017 pp. 21-38
Hyung Sik Chang and Seul Chan Lee* and Yong Gu Ji, (2016), Wearable device adoption model with TAM and TTF.
Int. J. Mobile Communications, Vol. 14, No. 5, 2016
Elena S. Izmailova, John A. Wagner and Eric D. Perakslis, (2018), Wearable Devices in Clinical Trials: Hype and
Hypothesis. Clinical Pharmacology & Therapeutics published by Wiley Periodicals, Inc. on behalf of
American Society for Clinical Pharmacology and Therapeutics, Vol. 104, No. 1
Michael Sydes, (2018), Wearables are Improving Clinical Trial Research in More Ways than One. Blog, Public
Responsibility in medicine and research
Manoj Jha
Prism Johnson limited
E-mail: manoj.jha@prismjohnson.in
Abstract
Safety is heart of manufacturing. It is possible to drive Manufacturing excellence keeping safety as an engine.
The study conducted revealed that zero harm culture towards man and machine can improve safety and productivity
together to a great extent. A system was developed and applied around man and machine to reduce risk of life and
risk of slow run. The safety index was linked with Overall equipment effectiveness. In this study a large number
of risks were identified for safe operation and maintenance for correction. The results revealed not only a specific
trend but the solution as well for the given condition. The defects which were getting corrected for the first time
and recurring type were found to be most unsafe in maintenance. The first time defects were mostly attributed to
inspection whereas the recurring one was the result of inability to fix the defect in first attempt. These failures
were reducing the Machine Utilization Index and also impacting morale. Similarly, the operational defects were
causing slow run and resulting in lower production rate index. Together the lower production rate index and
machine utilization index was reducing the overall equipment effectiveness. The detail examination of the recurring
unsafe act was subjected to Pareto and why why analysis which led to a solution to prepare additional standard
maintenance procedure for recurring defects. Similarly, the slow runs of the machine were corrected by additional
operating procedure. These procedures increased the machine output and machine run factor. Further a data
base was created to understand the impact of productivity on safety for about three years. It was established that
whenever the Production Rate Index and Machine Utilization Index exceeds a benchmark of 95 % and 92 %, the
risk of harm moves towards zero.
Zero harm
Slow run
Recurring defect
Overall equipment effectiveness
1. Introduction
This paper aims to apply the best practices of safety and to find synergy between safety and
productivity aiming at zero harm concept.
2. Methodology
Human life is precious and so in any industry the incidents are to be reduced by all means to zero
harm level. This can be predesigned and structured. To begin with defect needs to be rectified with
tailor made solution. A safety committee consisting of workmen and staff under guidance of Safety
professional chart out a programme to find out defects and erase them in a systematic way. Hazard
identification and risk assessment (HIRA), Improvement in mean time between failure, slow run
improves the overall equipment effectiveness (OEE). These measure support safety performance as
the operational productivity of man and machine improves.
3. Findings
The practices those improved the safety performances are described as under:
i. Safety Committee: Safety committee (1) is an excellent apex team which takes
decision on all aspects of safety and coordinates execution and monitoring of
results. This is effective as the participants are both workmen & top management
from each function. It is a platform where the workmen directly participate and
organise action with regards to safety.
ii. Hazard Identification and Risk Assessment (HIRA): HIRA (2) is very essential
tool to identify the hazard & take the control measures as per risk priority.
We identified about 13000 hazards & rectified them which helped us to reap
towards zero incidents.
iii. INDEX Development Plan: To have mass acceptance of the employee a platform
called INDEX was created. The INDEX meant Inspection, Notification, Delivery
and Excellence. This platform delivered a list of critical jobs through Inspection.
Notifications were generated on all the actionable. Solutions were delivered through
job planning to take corrective action.
Table 1: Summary of Hazards and Risks Attended in last 3 years
Apr- Sep 2018
2015-18 Total Completion (%)
Complete Pending
Line -I 185 36 10 96%
Safety Committee 502
Line -II 229 31 11 96%
Line -I 5445 1167 569 92%
HIRA 13057
Line -II 4722 846 326 94%
INDEX and Golden triangle* - 75 47 122 61%
Total 10581 2155 963 13681 93%
*INDEX – A new initiative comprising of Inspection, Notification, Delivery and Excellence and Golden triangle was about
three R comprising of Reason, Resource and Result:
Compliance to legal aspect is important and serves as a guideline for incident prevention
(3). Control measures to minimize the high risk hazard are essential to run the process smoothly.
Incident investigation& analysis plays a vital role in avoiding the repetitive incidents and it also
helps in identifying the root cause to remove the hazard from workplace. Root cause was arrived
and corrective measures taken to prevent repetitive incident. Believing in this theory we moved
towards Fatality prevention. Even a simple process can lead to fatality when the work instruction is
not known or not understood by the workmen, or without recommended PPE or unwanted behaviour
apart from work place hazards. Fatality is the highest risk, so the typical areas were identified for the
present case. The area identified like confined space, working at height, hot work area and fire prone
area. Control measures and emergency preparedness were brought into action through mock drill.
Tailor made training need (4) was arrived and training imparted. The details are provided in Table 2.
Table 2: Year Wise Table of Number of Employees Trained as per FPE’s
Year No. of Workmen Trained No. of Training
2015-16 2305 70
2016-17 2237 73
2017-18 1656 56
Apr-Sep 2018 1188 42
Further to strengthen the systems developed for mass involvement two more initiative launched.
One of them was safety awareness drive and another was popularising Golden rule of safety. These
rules were framed on the basis of past history of incident.
Safety Awareness Drive: Safety awareness (5) drive is essential in creating safety awareness
among the employees. We organized various safety awareness drives periodically which helped
using maintaining safe ambiance in the plant like National Safety Day celebration, State Safety Day
celebration, Road Safety Week celebration, monthly safety gate meeting, Fire Week celebration, No
Tobacco Day celebration, World Environment Day celebration etc.
Golden Rules for accident prevention: Efforts to discipline is surely important to follow safety rules,
it is often productive to focus on what actually hinders employees from making safe decisions.
For e.g. some of the Golden Rules for accident prevention was found result oriented, they are:
●● Leaders influence the culture of a zero harm environment.
●● Safety starts with the employee. Never walk past unsafe acts or conditions.
Never remove, bypass or modify a safety device without authorization.
●● Operate - if you are trained, assessed and obtained a safety permit and undertaken an
inspection before starting the work.
●● Drive to conditions and comply with project rules when on site. Use journey plans and
comply on road.
●● Isolate, lock out or tag out equipment being worked on. Never remove an employee’s
Underground Tag from the Tag Board or Personal Danger Tag from a piece of equipment.
●● Working with electrical devices is a restricted work activity. Take special work permit.
●● Working at heights space is a restricted work zone and activity. Take special work permit.
●● Never enter a delineated hazardous area without authorization. Restricted work zones
are confined spaces, any area involving welding or hot work activity, working with
explosives (blast zones, magazines) and incident investigation zones. Take special
work permit.
●● Similarly lifting work, working on/near water or mud, fire prone area work (Hot work),
is a restricted work zone and activity. Take special work permit.
●● Regularly assess ground and high wall conditions for movement, cracking, rock falls or
signs of instability.
●● Identify hazards and manage risks till the solution is not implemented. Ensure controls
are appropriate and robust.
●● There cannot be universal solution but this can be improvised by non-compromising
decision making abilities at high risk area.
With activities summarised in Table 1 and 2 the incident trend reduced and the details are given in
Graph 1, Graph 2, Graph 3 and Graph 4.
Graph 3: Year wise LTIFR*** (Lost Time Injury Frequency Rate) Trend
***LTIFR = (No. of reportable lost time injury × 1000000)/Man hour worked in period
Graph 4: Year wise LTISR**** (Lost Time Injury Severity Rate) Trend-
****LTISR =(No. of reportable Man Days Lost × 1000000)/Man hour worked in period
After completion of the identified jobs positive results were seen. Before 2015-16 about 13000
hazards were present & unattended, so the number of incidents was high but after completion of
93% of jobs the frequency & number is very low and reduced gradually which is shown in above
trend. To improve further it was observed that equipment and machine failures were reducing the
machine utilization Index and also impacting moral. Similarly, the operational defects were causing
slow run and resulting in lower production rate Index. Together the lower production rate index and
machine utilization index was reducing the overall equipment effectiveness. The detail examination
of the recurring unsafe act was subjected to Pareto and why-why analysis led to a solution to prepare
additional standard maintenance procedure for recurring defects. Similarly, the slow runs of the
machine were corrected by additional operating procedure were. These procedures increased the
machine output and machine run factor. Further a data base was created to understand the impact of
productivity on safety for about three years. It was established that whenever the Production Rate
Index and Machine Utilization Index exceeds a benchmark of 95 % and 92 % the risk of harm moves
towards zero. The details are provided in Graph 5, Graph 6, Graph 7 and Graph 8.
Production
Production
Production
Production
Apr–Sep
Apr–Sep
Incident
Incident
Incident
Incident
Incident
2014-15
2014-15
2015-16
2015-16
2016-17
2016-17
2017-18
2017-18
Month
No. of
No. of
No. of
No. of
No. of
2018
2018
1 387232 2 355762 2 378750 2 438082 0 448435 0
2 381655 0 312904 1 317449 1 263719 1 422901 0
3 360014 1 273769 3 394931 0 327953 1 382065 0
4 340046 0 414711 0 318018 1 400497 1 444730 0
5 248891 2 325276 1 273755 0 235320 1 335506 1
6 287936 4 139804 0 271278 0 147778 1 279271 0
7 329684 1 404798 0 418998 0 289346 3
8 365811 1 215488 0 305497 1 419034 0
9 169512 3 353471 0 181201 0 249552 2
10 375736 4 282598 3 363650 0 447178 0
11 360093 3 274911 2 285688 0 349461 2
12 307964 3 383587 1 463017 1 444098 1
Graph 9: Zero Incident Frequency Achieved in Highest, Second Highest and third Highest Productive Months
Jan-18 447178
From Table 4 it was inferred that when the process runs continuously without interruption the
likely hood of zero harm is assured to a great extent. This indicates that the probability of incident
occurring at highest productivity is close to zero. Zero incident has been achieved 8 months out of
12 highest productive months. A system targeting Overall equipment effectiveness and backed up
by best safety practices can create a synergy to deliver zero harm.
4. Contribution
The measures to improve machine availability and improve continuous operation can result into
improved safety performance. A synergy of operation, maintenance and safety initiatives create a
value for organisation and so excellence is achieved in business performance.
References
Potdar, B.R. and Patwardan, Girish, The Factories Act 1948 with The Madhya Pradesh/ Chhattisgarh Factories Rules
1962, Section 41G, pp. 37, Indore, India
Mistri, K.U., Fundamentals of Industrial Safety & Health, Hazard Identification and Risk Assessment, pp. 19.1-19.78,
Gujarat, India.
Mistri, K.U., Fundamentals of Industrial Safety & Health, Accident Causation and Prevention, pp. 4.1-4.24,
Gujarat, India
Mistri, K.U., Fundamentals of Industrial Safety & Health, Safety Management, Safety Education & Training, pp. 6.48,
Gujarat, India
Mistri, K.U., Fundamentals of Industrial Safety & Health, Safety Psychology, pp. 3.3-3.22, Gujarat, India
Nikhilesh Kasare
National Institute of Industrial Engineering, Mumbai
E-mail: nikhilesh.kasare.2017@nitie.ac.in
Vilas Kharat
National Institute of Industrial Engineering, Mumbai
E-mail: vilas1221@gmail.com
Abstract
Strategic capacity planning is top management decision and its tough task. This paper talks about Strategic Capacity
Planning for the entire plant/ company for next two years and devising a Excel template for the same to get optimal
solution using Excel function-solver which would help top management to take strategic decision of utilizing plant’s
capacity to its maximum extent and how much work load to do in-house, outsource, overtime and postpone to next
work cycle to best meet demanded work load. After achieving Strategic Capacity Planning for next two years on
monthly basis, now, next work is to allocate this work load capacity to different projects of the company according
to the priority of the projects under multiple criteria decision making using analytical hierarchy process (AHP).
AHP is used to rank the projects, in order to prioritize them for time and resource allocation. Analysis has been
carried out by using Chase (demand matching) strategy and Hybrid (xixed) strategy.
Keywords: Project Portfolio Management (PPM), Multi-Project Environment (MPE), Strategic Capacity Planning, AHP
1. Introduction
Projects are unique, there is an own best way managing projects portfolio (PP) and this phenomenon
is called contingency theory (Woodward, 1958). Managing multiple and different projects within an
organization in the same time is called as projects portfolio management (PPM), which, is based on
modern portfolio theory (MPT) (Markowitz, 1952). MPT has been influential as a significant tool
of identifying and assessing the project risks that can happen during the course of action in any
project-oriented organization. The project portfolio management has gained significance in recent
times, it is an emerging aspect of business strategy that focuses on how projects are selected,
prioritized, integrated and managed in multi-project environment which is prevalent in current
organizations (Young and Conboy, 2013). Literature shows more on gaining better understanding
of the strategic PPM decision processes involved in project selection, prioritization, balancing and
their alignment with organizations strategy (Archer and Ghasemzadeh, 1999; Greiner and Fowler,
2003, Cooper et al., 1999; Lager, 2002; Jolly, 2003; Roussel et al., 1991; and PMI, 2013). However,
with the greater complexity, uncertainty, information flow, reliability of information, information
technology (IT) infrastructure and information reach globally also important for portfolio management
(Artto and Dietrich, 2004; Barczak and Sultan, 2006; Salem and Mohanty, 2008; Browning, 2010;
Froese, 2010; Lam et al., 2010 and Vaccaro et al., 2010; Martinsuo et al., 2014). When organizations
start coordinating with different projects within the organization can deliver better results than doing
them individually, which would not possible to get better results (Cleland, 1999).
A big company or manufacturing plant has to handle so many projects at a time. Managing these
projects broadly means to allocate plants capacity or resources to these projects to get it done
within the deadlines and budget. A project manager or head of project management office has a
responsibility to optimally manage plant capacity and allocate it wisely to the project portfolio (PP)
in order to minimize the overall cost of operation. In this study, the research has been carried out
on, how to optimize the plant’s capacity (in terms of man-hours) for the next two years, so, we have
used two strategies of strategic capacity planning, one is Chase Strategy and another one is Mixed
(Hybrid) Strategy which is amalgamation of level strategy, outsourcing and postponement of work.
Under Chase strategy capacity of the plant is matched with the demanded work load by all projects
in the particular period. So, there is no need to prioritize the projects to allocate plants capacity as
ultimately capacity requirement of all projects are fulfilled in the particular period only when demand
is matched with the capacity. While in Mixed (hybrid) strategy, capacity of the plant is kept constant
over the period and there exist two situations, if demand exceeds capacity, then, excess demand is
catered through outsourcing, overtime, postponing some work load to next consecutive period and
if, capacity exceeds demand, then, capacity remained unutilized or can be reduced to certain extent
by pulling some work load of the period where demand exceeds capacity. After achieving optimal
strategic capacity plan next step is to allocate this capacity to project portfolio of the company.
But, these all to be done by keeping in mind that, no project should get delayed or if the situation
where delay cannot be avoided then delay penalty (loss) should be minimum. So, before allocating
plants capacity to projects, project manager must prioritize projects based on multiple criteria. Some
general and important criteria are as follows;
●● Penalty cost on the project
●● Profit margins
●● Project Buffer consumed till current date
●● Project Due date (Total Months Left)
●● Project completed till current date
In this paper, we have used the multi criteria decision making tool Analytical Hierarchy Process
(AHP) to prioritize projects based on above criteria. After prioritizing the projects, one can take
a decision to allocate plant’s capacity to high priority projects and postpone work of low priority
projects to subsequent periods and allocate the same to the project portfolio by prioritizing the
projects based on multiple criteria decision making.
Aforementioned problem is real situation faced in many organizations, where, multiple projects
are going-on and resources and capacity of the plant are limited to cater demand requirement of the
projects. So, top management has to decide capacity of the plant and allocate same to project portfolio
by prioritizing the projects based on multiple criteria decision making. Many a times, decisions are
taken by general discussion and based on experience of project manager, production manager and
other top management officials. But this is not right practice to take decision based on experience and
general discussion. This paper highlights a proper process to take such top management decisions
by gathering useful data, formulating real life problem in a mathematical model, solving it using
Excel-Solver to get optimal solution under given set of constraints and prioritize projects using AHP
to allocate capacity.
2. Literature Review
PPM has gained an important role in as making the strategy in multi-project environment as suggested
by many authors (Carvalho; Laurindo, 2003; Roussel et al., 1991; Cooper et al., 1999, 2001).
In order to achieve competitive advantage, the PPM output process should be able to meet the
company strategic requirements and also achieve its goals (Carvalho et al., 2003). The scholarly
work by several authors also stressed the importance of achieving steadiness in portfolios in different
ways, such as balancing between product innovation and process innovation; balance between
incremental and revolutionary projects; balancing between long term and short term; and balancing
between risk and reward (Adner; Levinthal, 2001; Roussel et al., 1991; Cooper et al., 1997, 1998,
1999, 2001; Tritle et al., 2000). Huanga et al. (2013) have practically implemented the theory of
constraints critical chain project management method and achieved good results over traditional
approach. Alneyadi and Asbin (2014) have used artificial intelligence approach in Information
Technology (IT) PPM in time and cost management and found impressive results over the
traditional approaches.
In any organization, which, manages large number of projects, in other words we can say the
multi-project environment the number of operations are carried out simultaneous projects, is more
often complex and challenging to manage (Hobday, 2000; Engwall & Jerbrant, 2003; Elonen
& Artto, 2003; Sydow, Lindkvist & DeFillipi, 2004; Söderlund & Tell, 2009; Arvidsson, 2009;
Jerbrant, 2013; Jerbrant & Gustavsson, 2013), in such an environment where complex city is
involved in PPM, where, there is a more focus on time and activity planning in order to facilitate the
coordination of scarce resources with limit on time. On the other side, the multi-project environment
theory stresses on improving efficiency and rationality in the structuring of the project portfolio’s
performance by means of practical methods, techniques & tools for effective resource allocation and
project prioritising (De Maio, Verganti & Corso, 1994; Van der Merwe, 1997; Cooper, Edgett &
Kleinschmidt, 2002; Danilovic & Sandkull, 2005; Moore, 2010). Some scholars have concluded that
the interdependencies which arise between different projects, as well as within the project and their
environment remain suggestively difficult (Cooper et al., 2002; Engwall & Jerbrant, 2003; Engwall,
2003; Blichfeldt & Eskerod, 2008).
Several researchers, in case of multi-project management have stressed on resource allocation,
control and prioritisation between projects (Gunnarson, Linde & Loid, 2000; McDonough & Spital,
2003; Crawford, Pollack & England, 2006; Dawidson, 2006; Jerbrant, 2009). The main area of PPM
research has followed a rational approach and in developing methods, tools and techiniques which
have focused on project structure and controlling mechanisms (Cooper et al., 2002; McDonough &
Spital, 2003; De Reyck, Grushka-Cockayne, Lockett, Caldemi, Moura & Sloper, 2005; Dawidson,
2006; Turner, 2009; Moore, 2010; Teller, Under, Kock & Gemünden, 2012). The PPM managers
are more often flooded by issues relating to project prioritisation and the distribution of resources to
low-priority cum smooth-running projects and more resources to high-priority cum projects in crisis
(Blichfeldt & Eskerod, 2008). However, most of the time the project manager faces difficulties in
getting more resources and there is no question of dreaming about surplus, hence, in multi project
environment managers primarily relay on methods, tools and techniques in project selection,
prioritization and resource allocation in most effective way possible (Hendriks, Voeten & Kroep,
1999; Cooper et al., 2002; Pennypacker & Dye, 2002; Turner, 2009; Moore, 2010). The mounting
acceptance of PPM theory and practice with the rationality of methods, tools and techniques for
structuring work and directing responsibility has encouraged the movement of formalization for the
multi-project enviroment (Thiry & Deguire, 2007).
PPM has got a significant role in project management research, product development management
research and in companies’ strategies in the past decade. In spite of the guidelines, instructions and
success strategies, companies still struggling in how projects should be selected to the portfolio,
how resources should be allocated across projects, how to align the entire portfolio with strategy
and how to assess the success of the portfolio across projects (Martinsuo, 2012). In order to aid
the project managers to make decisions properly in allocation allocate resources, project portfolio
management researchers (Elahi & Najafizadeh, 2012; Murray, Alpaugh, Burgher, Flachbart, &
Elrod, 2010; Rafiee, Kianfar & Farhadkhani, 2013; Bhattacharyya, Kumar & Kar, 2011; Rebiasz,
2013 and others) have developed different resource allocation models. However, several researchers
(Liberatore & Titus, 1983; Schmidt & Freeland, 1992; Eilat, Golany & Shtub, 2006; Solak, Clarke,
Johnson & Barnes, 2010; Lawson, Longhurst & Ivey, 2006; Meredith & Mantel, 2008; Verbano
& Nosella, 2010; Ghasemzadeh, & Archer, 2000) have concluded that the use of quantitative and
computer-aided project selection and resource allocation methods are not sufficient enough, rather
limited, due to their complexity, also, there is no consensus on which method to be used under which
circumstances will yield effective results. Artificial neural network methods were used in bringing
the relationships in R&D projects (Yu-Shan Chen, Ke-Chiun Chang and Ching-Hsun Chang, 2012),
which, has further strengthened the ANN in determining various factors which contributes the
success of R&D projects (Chen, Chang, & Chang, 2012).
There are many antecedents to measure the project portfolio success which eventually lead to
organizations success (Kester, Hultink, & Griffin, 2014; Martinsuo, 2013; Meifort, 2015), the
organizations ability to innovate is termed as the major antecedent (Eisenhardt & Martin, 2000;
Wheelwright & Clark, 1992). In-depth research has been carried out on new product development
(NPD) in the last decade (Evanschitzky, Eisend, Calantone, & Jiang, 2012; Kock, Gemünden,
Salomo, & Schultz, 2011; Salomo, Weise, & Gemünden, 2007; Sicotte, Drouin, & Delerue, 2014).
In the NPD research, successful product launches and business success were driven by front-end
activities (Cooper, 1988; Martinsuo & Poskela, 2011; Pinto & Slevin, 1989; Poskela & Martinsuo,
2009; Reid & de Brentani, 2012; Verworn, 2009; Williams & Samset, 2010). Fernandez Carazo
et al. (2008) have studied on the project prioritization based on the results obtained during the
evaluation process, or by means of other methodologies like multi-attribute utility analysis, the
analytical hierarchical process (AHP) proposed by Saaty (1980).
The methods, tools and techniques used in PPM, are often based on the ability to handle prerequisites
that may happen in day-to-day operations, in selection, prioritization and resource allocation of the
projects, most of the project intense organizations are having objective of meeting time deadlines,
uncertainties and day-to-day organization practices (Eskerod, 1996; Ward & Chapman, 2003).
In the other hand, in the context of PPM, the notion of flexibility is very important (Petit & Hobbs, 2010),
with the output, the coordinative and communicative managerial activities have become significantly
important (Dainty, Moore & Murray, 2006; Winch, 2010), this is in turn brings the importance of
uncertainty management with respect to PM and PPM prerequisites (Petit & Hobbs, 2010; Petit, 2012).
Three or four basic strategies can be used in developing a production plan;
2.3. Subcontracting
Means producing at the level of minimum demand and meeting any additional demand through
subcontracting. Costs associated with excess capacity are avoided and because production is leveled,
there are no costs associated with changing production levels. The main disadvantage is that the cost
of purchasing may be greater than if the item were made in the plant.
For calculating the total expenses on various heads, the current rates, which are followed at the
organization has been considered, number of shits are taken as two per day, number of hours per shift
is eight and total number of labours per shift is eighty. The following table shows various expenses
and their rates.
Table 2: Current Labour Force, Work and Wages Structure
Various Expenses In Rs.
Labour wages per labour per day 600
Total number of labours currently working in the plant 160
Subcontract labour wages per labour per day 400
Total working hours per day 16
Labour wages per labour per hour 75
Subcontract labour wages per labour per hour 50
Hiring and training cost of 1 labour 2000
Layoff(firing) cost of 1 labour 2500
Straight-line cost (Labour cost) of 1 labour per hour 75
Overtime cost of 1 labour per hour 140
Subcontract labour cost of 1 labour per hour 50
Factory premises, consumables, Power, electricity, etc. per hour basis (Overheads-1) 300
Staff manager charges per hour basis (Overheads-2) 300
As per Chase Strategy of Strategic Capacity Management, from the above data, the calculations have
been carried out. The following table shows per labour hours, costs, total labour cost and labour
required and availability matrix.
A: Monthly work load per labour, B: Total labours required (Gross work load per work done a labour), C: No. of workers in
that plant, D: New workers hired, E: Workers fired, F: New workers hiring cost, G: Workers firing cost
As per the chase strategy, the total cost for two years is Rs. 42.72 Crores and cost saving after two
years is Rs. 11.76 Crores. The savings will go down in case, new projects are added to the portfolio.
Permanent labour required for one-year plan is 136 (minimum of one year’s total labour required)
and for two year’s plan 51 (minimum of two year’s total labour required). Additional monthly work
load cab be done by hiring contract labour and if lesser monthly load can be catered by firing the
contract labours.
This strategy is useful in the situation where demand is more stable but most of demand is highly
fluctuating. Chase strategy is occasionally followed in actual practices, because, every time to hire
new workers, train them and fire workers which are not required, is not a good practice to follow
and, it creates bad work culture. Hence, strategic capacity planning strategy is generally followed in
the actual practice.
Mixed (hybrid) strategy is a total combination of level strategy, overtime, outsourcing and
postponement of work to next period. To optimize the monthly workload distribution the following
options are followed;
●● Perform in-house
●● Outsource (Sub-contract)
●● Get done by Overtime
●● Postpone to next subsequent months
For the two consecutive years, the cost minimization is carried out under the following constraints;
●● Overhead cost to be considered 100%, if, work is done in-house and 50%, if, it is done
through sub-contracting.
●● Subcontracting work has only one shift with eight hours span.
●● Overtime working consumes ‘overhead’ cost.
●● Max work load that can be postponed in a month is 10% of gross load of that month.
●● Max work load that can be overtime in a month is 6% of gross load of that month.
●● Work load postponement is done considering availability of work load of next two months.
●● Minimum work can be postponed is either minimum of load requirement of next two
months or excess load of the current month or max work that can be postponed
Now, after following above constraints, the data table1 has been analysed using Excel-Solver, by
keeping the objective function of minimization of total cost.
Table 4a: Work Hours Under Various Category for the Period 2016-17
Mar Apr May June July Aug Sep Oct Nov Dec Jan Feb
A 0.00 0.00 0 0 0 0 503 6546 6239 8402 7292 6862
B 0.00 0.00 0 0 0 0 0 0 0 0 0 0
C 1152 1957 2611 0 0 0 3624 3750 4130 3900 3810 4050
D 34850 35355 36008 32574 28350 28500 36240 41124 45050 43130 42000 44310
E 33698 33397 33397 32574 28350 28500 32616 37374 40920 39230 38190 40260
F 33698 33397 33397 34682 32113 33397 32113 30828 34682 30828 30898 33397
G 0 0 0 0 0 0 503 6546 6238 8402 7292 6863
H 33698 33397 33397 32574 28350 28500 32113 30828 34682 30828 30898 33397
I 3485 3420 3405 2996 2835 2850 3624 3750 4130 3900 3810 4050
J 0 1957 2611 0 0 0 0 0 0 0 0 0
K 2091 2052.18 2043.06 1797.78 1701 1710 2174.4 2250 2478 2340 2286 2430
Table 4b: Work Hours Under Various Category for the Period 2017-18
Mar Apr May June July Aug Sep Oct Nov Dec Jan Feb
A 5957 0 0 0 0 0 0 0 0 0 0 0
B 0 0 0 0 0 0 0 0 0 0 0 0
C 3780 98.3 0 0 0 0 0 0 0 0 0 0
D 41850 34780 20098 14000 16000 15000 11500 13500 13500 13500 12500 10700
E 38070 34682 20098 14000 16000 15000 11500 13500 13500 13500 12500 10700
F 32113 34682 33397 33397 32113 33397 32113 30828 34682 32113 30828 33397
G 5957 0 0 0 0 0 0 0 0 0 0 0
H 32113 34682 20098 14000 16000 15000 11500 13500 13500 13500 12500 10700
I 3780 3100 2000 1400 1600 1500 1150 1350 1350 1350 1250 1070
J 3780 98 0 0 0 0 0 0 0 0 0 0
K 2268 1860 1200 840 960 900 690 810 810 810 750 642
A: Total Outsourced work hrs, B: Total Overtime work hrs, C: Postponed work hrs, D: Total opening load for this month, E: Total
demand (load) to cater in this month including past postponement, F: Total plant capacity, G: Total work to outsource & Overtime,
H: Total work to do in-house, I: max work hrs can be postpone, J: Min work hrs to postpone, K: Max work can be overtime.
As per optimal solution given by Solver in MS Excel under real-life constraints, as we come to know
how much work load capacity to manage in house, Outsource, Overtime and with Postpone. As per
the hybrid (mix) strategy, the total minimum cost for two years is Rs. 54.48 Crores. Starting three
month’s work load postponement to fourth month (July-16) incurs more labour utilization from
86.4% to 94%. Work load postponement from the months Oct-16 to Apr-17 resulted in increasing of
labour utilization of the month may-17 from 89.4 to 100%.
But for solving any problem in AHP, either we must convert all criteria to either minimization or
maximization. We prefer to convert all to maximization (taking reciprocal of minimization criteria
values and keeping maximization criteria values same).
After solving by AHP, we get AHP weighted factor for each criterion by using Saaty (2008)
pair-wise comparison scale.
Table 10: AHP Weighted Factor for Each Criterion
Criteria AHP weightage factor
Penalty 0.505
Profit margins 0.274
Project Buffer consumed 0.114
Total Months left 0.061
Project Completion 0.046
Total 1
So now multiplying fractional values of each project with AHP weightage factor, we get final
normalized AHP factors for each project as follows and hence based on which projects can be
prioritized for the mentioned 5 criteria.
Table 11: Normalized AHP Factor for Each Project
Project Final Normalized AHP Factor Project Priorities (Ranking)
Project 1 0.060062951 2
Project 2 0.02260996 16
Project 3 0.015090829 22
Project 4 0.031493122 13
Project 5 0.037583221 11
Project 6 0.017629533 26
Project 7 0.016686991 28
Project 8 0.010349262 29
Project 9 0.017666425 27
Project 10 0.040890641 7
Project 11 0.02731648 17
Project 12 0.024022014 23
Project 13 0.04292112 6
Project 14 0.023035907 21
Project 15 0.024929465 15
Project 16 0.034398598 8
Project 17 0.023959289 24
Project 18 0.035525121 14
Project 19 0.031967769 18
Project 20 0.042440382 12
Project 21 0.081538484 1
Project 22 0.025796294 20
Project 23 0.017650729 19
Project 24 0.039181537 9
Project 25 0.009898638 30
Project 26 0.06136632 4
Project 27 0.047435738 5
Project 28 0.01201625 31
Project 29 0.063864795 3
Project 30 0.020285996 25
Project 31 0.04038614 10
So now after setting project priorities, the projects which have lesser AHP rating than others are
less important based on above 5 criteria and work load requirement of the same can be kept on
postponing to match work load capacity as per mixed (hybrid) strategy of capacity planning, till the
projects enter into the last phase and won’t get delayed.
5. References
Adesina, Oluseyi Temitope., Ikhu Omoregbe and Oyewole Olabode Michael (2015), An Assessment of Project Portfolio
Management Techniques on Product and Service Innovation: Evidence from Nigerian Selected Industries,
IOSR Journal of Economics and Finance, Vol. 6, No. 4, pp. 8-20.
Adner, R.; Levinthal, D. Demand (2001), Heterogeneity and Technology Evolution: Implications for product and
Process Innovation. Management Science, Vol. 47, No. 5, pp. 611-628.
Alneyadi, Ali Sulaiman and Asbin Bin Ali (2014), Artificial Intelligence Approach for Project Portfolio Management,
International Journal of Enhanced Research in Science Technology & Engineering, Vol. 3, No. 3, pp. 458-469.
Archer, N.P. and Ghasemzadeh, F. (1999), An Integrated Framework for Project Portfolio Selection, International
Journal of Project Management, Vol. 17, No. 4, pp. 207-216.
Artto, K.A., Dietrich, P.H. (2004), Strategic business management through multiple projects, the Wiley Guide to Project,
Program & Portfolio Management, pp. 1-33.
Arvidsson, N. (2009), Exploring tensions in projectified matrix organisations, Scandinavian Journal of Management,
Vol. 25, pp. 97-107.
Atrill, P. (2000), Financial Management for Non-specialists, Second Edition, Prentice Hall, England.
Bailey, B., Couet, B., Lamb. F., Rose, P. and Simpson, G., in press, Taking a Calculated Risk, Oilfield Review.
Barczak, G., Sultan, F. (2006)., Use it or lose it, Mark. Manag., Vol. 5, No. 2, pp. 30–34.
Blichefldt, B. and Eskerod, P. (2008), Project portfolio management –There’s more to it than what management enacts,
International Journal of Project Management, Vol. 26, pp. 357-365.
Bhattacharyya, R., Kumar, P. & Kar, S. (2011), Fuzzy R&D portfolio selection of interdependent projects, Computers
and Mathematics with Applications, Vol. 62, pp. 3857–3870.
Borsch, K. and Mossin, J. (1968), Risk and Uncertainty, proceedings of a conference held by the International Economic
Association, Macmillan, New York.
Bowman, C. and Ambrosini, V. (1997), Using Single Respondents in Strategy Research, British Journal of Management,
Vol. 8, pp, 119-131.
Browning, T.R. (2010), On the alignment of the purposes and views of process models in project management, J. Oper.
Manag., Vol. 28, pp. 316–332.
Carvalho, M.M. and Laurindo, F.J.B. (2003), Linking strategy with a network of performance indicators: a Brazilian
Research Centre case study, International Journal of Business Performance Management, Vol. 5, No. 4, pp.
285-301.
Carvalho, M.M. and Laurindo, F.J.B. and Pessoa, M.S.P. (2003), Information Technology Project management to
achieve efficiency in Brazilian Companies. In: KAMEL, S. (Org.). Managing Globally with Information
Technology.Hershey, pp. 260-271.
Chen, Y.S., Chang, K.C. and Chang, C.H. (2012), Non-linear influence on R&D project performance, Technological
Forecasting & Social Change, Vol. 79, pp. 1537– 1547.
Cleland, D.I. (1999), The Strategic context of projects in Project Management: Strategic Design and Implementation,
Third Edition. New York: McGraw-Hill, pp. 91-117.
Cooper, G.R., Edgett, S. and Kleinschmidt, J.E. (2002), Optimizing the stage-gate process: What bestpractice companies
do, part I. Research Technology Management, Vol. 45, No. 5, pp. 21-27.
Cooper, G.R., Edgett, S. and Kleinschmidt, J.E. (2001), Portfolio Management for New Product Development, R & D
Management, Vol. 31, No. 4, pp. 361-380.
Crawford, L., Pollack, J. and England, D. (2006), Uncovering the trends in project management: Journal emphases over
the last 10 years, International Journal of Project Management, Vol. 24, 175-184.
Dainty, A., Moore, D. and Murry, M. (2006), Communication in Construction: Theory and Practice, London, Taylor & Francis.
Danilovic, M. and Sandkull, B. (2005), The use of dependence structure matrix and domain mapping matrix in managing
uncertainty in multiple project situations, International Journal of Innovation Management, Vol. 23, pp.193-203.
Dawidson, O. (2006), Project portfolio management-An organising perspective, PhD thesis, Chalmers University of
Technology, Gothenburg.
Demaio, A., Verganti, R. and Corso, M. (1994), A multi-project management framework for new product development,
European Journal of Operational Research, Vol. 78, No. 2, pp. 178-191.
Eilat, H., Golany, B. & Shtub, A. (2006), Constructing and evaluating balanced portfolios of R&D projects with interactions:
A DEA based methodology, European Journal of Operational Research, Vol. 172, pp. 1018–1039.
Eisenhardt, K. M. and Martin, J.A. (2000), Dynamic capabilities: What are they? Strategic Management Journal, Vol.
21, No. 10-11, pp. 1105–1121.
Elahi, M. & Najafizadeh, N.S. (2012), Project selection and prioritization in Iranian Aluminium Company (IRALCO),
Africal Journal of Business Management, Vol. 6, No. 22, pp. 6560–6574.
Elonen, S. and Artto, A.K. (2003), Problems in managing internal development projects in multi-project environments,
International Journal of Project Management, Vol. 21, pp. 395-402.
Engwall, M. and Jerbrant, A. (2003), The resource allocation syndrome, International Journal of Project Management,
Vol. 21, pp. 403-409.
Engwall, M. (2003), No project is an island: Linking projects to history and context, Research Policy, Vol. 32, pp.
789-808.
Eskerod, P. (1996), Meaning and action in a multi-project environment: Understanding a multi-project environment by
means of metaphors and basic assumptions, International Journal of Project Management, Vol. 14, No. 2,
pp. 61-65.
Evanschitzky, H., Eisend, M., Calantone , R.J. and Jiang, Y. ( 2012), Success factors of product innovation: An updated
metaanalysis, Journal of Product Innovation Management, Vol. 29, No. 1, pp. 21–32.
Froese, T.M. (2010), The impact of emerging information technology on project management for construction, Autom.
Constr., Vol. 19, pp. 531–538.
Ghasemzadeh, F. and Archer, N. (2000), Project portfolio selection through decision support, Decision Support System,
Vol. 29, pp. 79–88.
Greiner, M.A. and Fowler, J.W. (2003), A hybrid approach using the analytic hierarchy process and integer programming
to screen weapon systems projects, IEEE Trans. Eng. Manag., Vol. 50, No. 2, pp. 192-203.
Gunnarsson, S., Linde, A. and Loid, D. (2000), Is s standardization applicable to project managers of multi-project
companies? In: Paradoxes of project collaboration in the global economy: Interdependence, complexity and
ambiguity. IRNOP IV, Sydney: University of Technology: 136-146.
Hendriks, M.H.A., Voeten, B. and Kroep, L. (1999), Human resource allocation in a multi-project R&D environment,
International Journal of Project Management, Vol. 17, No. 3, pp. 181-188.
Hobday, M. (2000), The project-based organisation: An ideal form for managing complex products and systems?
Research Policy, Vol. 29, pp. 871-893.
Huanga, Chia-Ling., Rong-Kwei LI, Yi-Chan Chung, Yao-Wen HSU and Chih-Hung TSAI (2013), Study of Using
Critical Chain Project Management Method for Multi-Project Management Improvement, International
Journal of Academic Research in Economics and Management Sciences, Vol. 2, No. 3, pp. 55-67.
Jerbranta A. (2013), Organising project-based companies: Management, control and execution of project based industrial
operations, International Journal of Managing Projects in Business, Vol. 6, No. 2, pp. 365-378.
Jerbrant, A. and Karrbom Gustavsson, T. (2013), Managing project portfolios: Balancing flexibility and structure by
improvising, International Journal of Managing Projects in Business, Vol. 6, No. 1152-172.
Jolly, D., (2003), The issue of weightings in technology portfolio management, Technovation, Vol. 23, pp. 383–391.
Kester, L., Hultink , E.J. & Griffin, A. ( 2014 ), An empirical investigation of the antecedents and outcomes of NPD
portfolio success: NPD portfolio success, Journal of Product Innovation Management, Vol. 31, No. 6, pp.
1199–1213.
Kock, A., Gemünden, H.G., Salomo, S. and Schultz , C. (2011), The mixed blessings of technological innovativeness
for the commercial success of new products, Journal of Product Innovation Management, Vol. 28, No. 1,
pp. 28–43.
Lager, T., 2002), A structural analysis of process development in process industry: a new classification system for
strategic project selection and portfolio balancing, R&D Manag., Vol. 32, pp. 87–95.
Liberatore, M.J. and Titus, G.J. (1983), The Practice of Management Science in R&D Project Management, Management
Science, Vol. 29, No. 8, pp. 962-974.
Lawson, C.P., Longhurst, P.J. and Ivey, P.C. (2006), The application of a new research and development project
selection model in SMEs, Technovation, Vol. 26, No. 2, pp. 242-250.
Markowitz, H.M. (1952), Portfolio Selection, The Journal of Finance, Vol. 7, No. 1, pp. 77-91.
Martinsuo, M. (2012), Project portfolio management in practice and in context, International Journal of Project
Management, Vol. 31, 794–803.
Martinsuo, M. and Poskela, J. ( 2011), Use of evaluation criteria and innovation performance in the front end of
innovation, Journal of Product Innovation Management, Vol. 28, No. 6, pp. 896–914.
Martinsuo, M., Korhonen, T. and Laine, T. (2014), Identifying, framing and managing uncertainties in project portfolios,
Int. J. Proj. Manag., Vol. 32, No. 5, pp. 732–746.
Meredith, J.R. and Mantel, Jr. S.J. (2008), Project Management: A Managerial Approach, 7th edition. John Wiley &
Son, Inc., EUA.
Mcdonough, E.F. and Spital, C.F. (2003), Managing project portfolios, Research Technology Management, Vol. 46,
No. 7, pp. 40-46.
Meifort, A. (2015), Innovation portfolio management: A synthesis and research agenda, Creativity and Innovation
Management, Vol. 25, No. 2, pp. 251-269.
Moore, S. (2010, Strategic portfolio management: Enabling a productive organization, Hoboken: Wiley.
Murray, S., Alpaugh, A., Burgher, K., Flachbart, B. and Elrod, C.C. (2010), Development of a Systematic Approach to
Project Selection for Rural Economic Development, Journal of Rural and Community Development, Vol.
5, No. 3, pp. 1–18.
Pennypacker, S.J. and Dye, D.L. (2002), Project portfolio management and managing multiple projects: Two sides of the
same coin? In, Pennypacker & Dye (eds.), Managing multiple projects, New York, Dekker.
Pwtit, Y. and Hobbs, B. (2010), Project portfolios in dynamic environments: Sources of uncertainty and sensing
mechanisms, Project Management Journal, Vol. 41, No. 4, pp. 46-58.
Petit, Y. (2012), Project portfolios in dynamic environments: organising for uncertainty, International Journal of Project
Management, Vol. 30, pp. 539-553.
Pinto , J.K. and Slevin, D.P. (1989), Critical success factors, in R&D projects, Research Technology Management, Vol.
32, No. 1, pp. 31–36.
PMI, Project Management Institute, 2013a. The Standard for Portfolio Management/Project Management Institute. third
ed Project Management Institute, Four Campus Boulevard, Newtown Square.
Poskela, J. and Martinsuo , M. (2009), Management control and strategic renewal in the front end of innovation, Journal
of Product Innovation Management, Vol. 26, No. 6, pp. 671 – 684 .
Rafiee, M., Kianfar, F. and Farhadkhani M. (2013), A multistage stochastic programming approach in project selection
and scheduling. Springer–Verlag London.
Rebiasz, B. (2013), Selection of efficient portfolios–probabilistic and fuzzy approach, comparative study, Journal
Computers and Industrial Engineering, Vol. 64, No. 4, pp. 1019–1032.
Reid, S.E. and de Brentani, U. (2004), The fuzzy front end of new product development for discontinuous innovations:
A theoretical model, Journal of Product Innovation Management, Vol. 21, No. 3, pp. 170 – 184 .
Roussel, P., Saad, K.N. and Erickson, T.J. (1991), Third Generation R&D Managing the Link to Corporate Strateg,
Harvard Business School Press, Cambridge, MA.
Roussel, P., Saad, K.N. and Erickson, T.J. (1991), Third Generation R&D Managing the Link to Corporate Strategy.
Cambridge: Harvard Business School Press.
Saaty, T.L. (1980), The analytic hierarchy process: planning, priority, setting resource allocation, McGraw-Hill, New York.
Salem, O. and Mohanty, S. (2008), Project management practices and information technology research, J. Constr. Eng.
Manag., pp. 501–508.
Salomo, S., Weise , J. and Gemünden, H.G. ( 2007), NPD planning activities and innovation performance: The
mediating role of process management and the moderating effect of product innovativeness, Journal of
Product Innovation Management, Vol. 24, No. 4, pp. 285–302.
Schmidt, R.L and Freeland, J.R. (1992), Recent Progress in Modeling R&D Project-Selection Process, IEEE Transactions
on Engineering Management, Vol. 39, No. 2, pp. 189–201.
Sicotte, H., Drouin, N. and Delerue, H. (2014), Innovation portfolio management as a subset of dynamic capabilities:
Measurement and impact on innovative performance, Project Management Journal, Vol. 45, No. 6, pp. 58–72.
Soderlund, J. (2004), On the broadening scope of the research on projects: A review and a model for analysis,
International Journal of Project Management, Vol. 22, pp. 655-667.
Solak, S., Clarke, J.P.B., Johnson, E.L. and Barnes, E.R. (2010), Optimization of R&D project portfolios under
endogenous uncertainty, European Journal of Operational Research, Vol. 207, pp. 420–433.
Sydow, J., Lindkvist, L. and Defillipi, R. (2004), Project-based organizations, embeddedness and repositories of
knowledge, Organisation Studies, Vol. 25, No. 9, pp. 1475-1489.
Telier, J., Under, B.N., Kock, A. and Gemunden, H.G. (2012), Formalization of project portfolio management:
The moderating role of project portfolio complexity, International Journal of Project Management, Vol. 30,
No. 5, pp. 596-607.
Thiry, M. and Deguire, M. (2007), Recent development in project-based organizations, International Journal of Project
Management, Vol. 25, pp. 649–658.
Tritle, G.L., Scriven, F.V. and Fusfel, A.R. (2000), Resolving uncertainty in R and D portfolios, Research Technology
Management, Vol. 43, No. 6, pp. 47-55.
Turner, J.R. (2009), The handbook of project-based management (3rd ed.), New York, McGraw-Hill.
Vaccaro, A., Parente, R. and Veloso, F.M., (2010), Knowledge management tools, inter-organizational relationships,
innovation and firm performance, Technol. Forecast. Soc. Chang., No. 77, pp. 1076–1089.
Verbano, C. and Nosella, A. (2010), Addressing R&D investment decisions: a cross analysis of R&D project selection
methods, European Journal Innovation Management, Vol. 13, No. 13, pp. 355–380.
Verworn , B. ( 2009 ), A structural equation model of the impact of the “fuzzy front end” on the success of new product
development, Research Policy, Vol. 38, No. 10, pp. 1571–1581 .
Ward, S. and Champman, C. (2003), Transforming project risk management into project uncertainty management,
International Journal of Project Management, Vol. 21, pp. 97-105.
Wheelwright, S. and Clark, K. (1992), Revolutionizing product development, New York, NY: Free Press.
Wheel Wright, S.C. and Clark, K.B. (1992), Revolutionizing New Product Development, New York: The Free Press.
Wideman, Max, (2005), Project portfolio management: a Practical guide to selecting projects, managing portfolios and
maximizing benefits, John Wiley and Sons, Inc, San Francisco.
Williams, T. and Samset, K. (2010), Issues in front-end decision making on projects, Project Management Journal, Vol.
41, No. 2, pp. 38–49.
Winch, G.M. (2010), Managing construction projects, Wiley-Blackwell.
Woodward, J. (1958), Management and Technology, London, UK.
Young, M. and Conboy, K. (2013), Contemporary project portfolio management: reflections on the development of
an Australian Competency Standard for Project Portfolio Management, Int. J. Proj. Manag., Vol. 31, pp.
1089–1100.
Preeti Sharma
Analytics & IT, Institute of Management Technology,
Hyderabad, India
E-mail: preetisharma@imthyderabad.edu.in
Purnima Sangle
Decision Sciences & Information Systems, National
Institute of Industrial Engineering, Mumbai, India
E-mail: purnima@nitie.edu
Abstract
Technological disruptions have been changing the organizational landscape of managing the customer
relationships. Organizations continuously struggle for the effective implementation of technological innovations
and synchronization of customer data thereafter over multiple channels. Cloud CRM offers multifold benefits in
such scenarios. This paper aims to study the challenges organizations face in the implementation of Cloud CRM
verses the value derived from such initiatives. Given the scars literature supporting the decision making process
of such initiatives the motives tend to differ from the pre adoption stage and after the initial implementation is
completed the organizations find it difficult to overcome the changing motivational levels of implementation teams
without demonstration of additional value created by such initiative. It becomes imperative to explicitly identify and
demonstrate the value created for the continuous usage of such implementations. The study also attempts to identity
the different values created at different levels of the organization.
Keywords: Cloud CRM, Technological Disruption, Relationship Management, Organizational Initiatives, Value
Creation, Indian Study
1. Introduction
In the information systems, customer relationship management (CRM) is the overall process of
building and maintaining profitable customer relationships by delivering superior customer value
and satisfaction with the goal of improving the business relationships with customers. Also, it is
the strongest and the most efficient approach to maintaining and creating the relationships with
customers. (Soltani and Navimipour, 2016). In this context the latest surge of cloud-based CRM
applications (e.g. Sales cloud by Salesforce, Microsoft Dynamics CRM, Sage CRM, etc.) can now
be delivered through the Internet which can be accessed by agents, supervisors, and executives in
real time (Lal and Bharadwaj, 2015). Further the Cloud-based CRM systems can be implemented
as SaaS which will help organizations in minimizing their investments in IT infrastructure. These
cloud-based systems not only help organizations to get off the ground rapidly but are best suited for
sales persons as they are generally on the move and can access these solutions from any location
and on any device, be it a laptop or a smart phone (Lal and Bharadwaj, 2015). The ultimate aim is to
provide useful cloud based CRM systems that are not only easy to manage but also enhance business
value (Wardley & Mahowald, 2011).
The main difference between traditional CRM and cloud CRM can be seen the way the software
service is delivered and the way customer data is handled and utilized. Cloud CRM also allows
through various platforms customers to actively participate in partnership with their vendors.
Moreover it can influence and contribute to the improvement and adaptation of the product according
to their wishes and requirements. In this regard the pioneer customers of such systems also generate
value by means of their product/service improvement feedback.
The above settings make cloud CRM a perfect solution for medical practitioners who provide their
services to remotely situated areas where commuting to the practitioner takes a lot of time, the
IAMOT 2019 | 475
Managing Technology for Inclusive and Sustainable Growth
patients are not much educated and also there are other factors like week socioeconomic conditions
of the patients. Nevertheless the problems of successful adoption of cloud CRM are still poorly
explored primarily in such medical practice field. Vendors often do not know modern techniques
and metrics for assessing implementation of cloud CRM. Besides the customers who have another
level of customers (as in current study the medical Practitioners and their patients) are also not
much responsive and don’t leverage the benefits. This study aims to study the challenges vendor
face in the implementation of Cloud CRM verses the value derived from such initiatives by medical
practitioners. It also attempts to identify and demonstrate the value created for the continuous usage
of such implementations. The study also attempts to identity the different values created at different
levels i.e. vendor, practitioner and patients.
2. Objective
The objectives of the study are spread across three different levels (refer figure 1 & 2) and can be
enumerated as follows:
●● To find out what challenges are faced by the vendors when pitching for the Cloud based
CRM service to medical practitioner?
●● To find out what inhibits medical practitioner from using the Cloud based CRM service?
●● To find out what inhibits Patients from using the Cloud based CRM service?
●● To find out how the value is derived by the vendor providing the Cloud based CRM
service?
●● To find out what value is derived by the medical practitioner who is using the Cloud
based CRM service?
●● To find out what value is derived by the patients who are using the Cloud based CRM service?
the current study the definition of Cloud Computing considered is “It is an information technology
service model where computing services (both hardware and software) are delivered on-demand to
customers over a network in a self-service fashion, independent of device and location. The resources
required to provide the requisite quality-of-service levels are shared, dynamically scalable, rapidly
provisioned, virtualized and released with minimal service provider interaction. Users pay for the
service as an operating expense without incurring any significant initial capital expenditure, with
the cloud services employing a metering system that divides the computing resource in appropriate
blocks” (Marston et al. 2011). At last we define cloud CRM as cloud based CRM services where
the software as well as the customer data is kept on the software provider’s servers on a data-center,
which is accessible using an internet browser or an app on desktop/tablet/mobile.
There are many issues related to CRM and cloud based CRM enumerated earlier in the studies (Dillon
et al. 2010; Rong, et al. 2013). One of the major problems faced with CRM is the large investment
to build and maintain a customer database which requires computer hardware, database software,
analytical programs, communication links, and skilled personnel (Minwir Al-Shammari, 2009).
Also, there is the difficulty of getting everyone in the organization to be customer oriented and to get
everyone to actually use the customer information that is available (Chowhan and Saxena 2011).
Moreover Cloud computing introduces significant concerns about privacy, security, data integrity,
intellectual property management, audit trails, and other issues (Singh et al., 2016). Furthermore,
because of the control that consumers of cloud services cede to providers, successful initiatives rely
on a high degree of trust between medical practitioner and the vendor, including confidence in the
provider’s long-term viability.
4. Literature Review
Even though the concept of CRM is new for the private healthcare sector in developing country like
India but the hospitals are trying hard to gain knowledge about CRM and to promote CRM towards
service orientation (Vaish et al., 2016). A study by Habidin et al. (2015) stated that Healthcare
providers interact with patients through multiple of ways. CRM is viewed as one of the organization
strategy to manage the relationship between healthcare providers and patient. Further it also showed
through the empirical analysis that organization can improve their organizational performance to a
better quality using service quality improvements.
Furthermore Laurenza et al. (2018) state that as innovation plays a key role in the sustainability of
healthcare systems, which can be considered a huge challenge, managers should understand whether
new digital technology-based approaches in healthcare can provide the long-term economic benefits
they expect. Moreover this article also shows the need for a greater patient orientation toward
healthcare service development, supporting the idea that patients do not need to be seen in a passive
position but rather that they are the targets of care and are able to give feedback and change service
providers. Poku et al. (2017) in another study assert that healthcare organizations must emphasize
on building relationships with their patients just as companies in non-healthcare industries have done
with the concept of customer relationship management (CRM). They emphasized that though some
providers have already made strides in this area, yet overall it has been underemphasized or ignored
by most healthcare systems to date (Poku et al., 2017). The authors also suggested that the healthcare
providers should work to develop their dedicated patient relationship management (PRM) systems,
tools, and processes by emulating companies in other industries who have been able to leverage
CRM to engage their customers in innovative ways while acknowledging the differences between
healthcare and other industries.
5. Proposed Framework
The proposed study draws line of action from Stabell and Fjeldstad (1998) study based on Porter’s
Value chain model (Porter, 1985) and value concept discussed by Kumar and Reinartz (2016).
Stabell and Fjeldstad (1998) divided the analysis of entire value chain model into value chain, value
shop, and value network and suggested that application of original model as a whole may not capture
the entire gamut of values for the organization due to variation in the nature of services being offered
and the type of vendors and customers involved. They also presented that implementing the original
value chain model witnessed serious problems and was found less suitable in a numbers of service
industries. As the technological components are found to be heavily interlaced with all kinds of
activities organization perform, it would be better to model the value separately at value chain, value
shop, and value network. They mentioned that healthcare, schools / universities, and consulting
firms are examples of value shop as these rely on an intensive technology and the value is created by
mobilizing resources and activities to resolve a particular customer problem.
Furthermore, while discussing the concept of customer value, Kumar and Reinartz (2016) state that
despite the fact the value creation happens fairly regularly, this process is beneficial only if it is long-
lasting, which is possible only when the customer perceived value (i.e., value to customers) and firm
value (i.e., value from customers) are aligned. Moreover, creating and communicating perceived
value to customers is better served when firms align perceived value with the resources they spend
on customers, to ensure that the right amount of resources go toward managing perceived value.
Besides, the alignment process is constantly shaped by what we know about value and the knowledge
we still seek. When these two value sources are aligned, it leads to the creation of enduring customer
value, as opposed to just value.
The current study based on the concept of value shop presented by Stabell and Fjeldstad (1998) would
attempt to identify the set of values that are created at the vendor as well as medical practitioner’s
level for adoption of cloud CRM. Further it would examine the resources and activities used by the
vendor to resolve medical practitioners’ challenges in adoption of cloud CRM hence mitigating
vendor’s own challenges. Moreover the challenges faced by the patients and medical practitioners as
well will be studied from Kumar and Reinartz (2016) point of view to identify the values which can
be created at these levels from adoption of cloud CRM.
6. Proposed Methodology
As the study involves different types of informants (vendor who is the provider, medical practitioner
who is a user as well as a provider for patients and patient who is also a user of the system/information
coming through system) it requires different methods to find out the answers to examine the issues.
For data collection interview method is found to be suitable guided by semi-structured interview
technique. Also for further information collection of documents, promotional material etc. is also
proposed. Further the observation method is suggested for collecting information from patients. For
achieving the research objectives methods of induction and deduction both are suggested.
7. Expected Outcomes
In the current study we attempt to look at three different dimensions for compiling the values derived
from cloud CRM adoption. These three dimensions/levels are considered to be the vendor, the medical
practitioner and the patient. As we understand that the vendor has to convince the medical practitioners
for usage of the cloud CRM system, the value proposed by the vendor for usage and the value perceived
by the practitioner may be different and therefore the objectives of cloud CRM usage may differ at
these two levels. Furthermore the patients may also have their own set evaluation depending upon
their understanding, requirement and push from the practitioner. The study of the later would help in
enlisting the places where value can be added for and from adoption of cloud CRM.
8. Conclusion
Values have been considered as principles that people adhere to and use to evaluate situations
accordingly (Pedron et al., 2016). Keeney (1992) stated in his book “Values are what we care about.
As such, values should be the driving force for our decision making”(page. 3). According the value
theory given by Keeney (1992) it is only possible for decision makers to make good decisions if their
values are expressed by objectives. Thus, it is particularly essential to build up a set of objectives that
will support a decision process.
IAMOT 2019 | 478
Deriving Value for and from Adoption of Cloud CRM
This study proposes to identify a set values perceived at the three levels stated above. Furthermore
with the help of these values the study will also attempt to enumerate various objectives at different
levels and will see whether the objective remain same as projected by the vendor or vary based on
the user.
References
Awasthi, P., and Sangle, P. S. (2012). Adoption of CRM technology in multichannel environment: a review (2006-
2010). Business Process Management Journal, 18(3), 445-471.
Awasthi, P., Dubey, N., and Sangle, P. S. (2014). Contemporary challenges in CRM technology adoption: a multichannel
view. International Journal of Electronic Customer Relationship Management, 8(1-3), 51-71.
Brown, S. A., “CRM: A Strategic Imperative in the World of E-business”, John Willey and Sons Inc., USA, 2000.
Chen, I. J., and Popovich, K. (2003). Understanding customer relationship management (CRM) People, process and
technology. Business process management journal, 9(5), 672-688.
Chowhan, S., and Saxena, R. (2011). Customer relationship management from the business strategy perspective with the
application of cloud computing. the Proceedings of DYNAA, 2(1), 28-38.
Dillon, T., Wu, C., and Chang, E. (2010, April). Cloud computing: issues and challenges. In Advanced Information
Networking and Applications (AINA), 2010 24th IEEE International Conference on (pp. 27-33). Ieee.
Habidin, N. F., Ali, N., Khaidir, N. A., Shazali, N. A., & Jusoh, O. (2015). Relationship between customer relationship
management, service qualityimprovement and organizational performance in malaysian healthcare
industry. International Journal of Innovation and Scientific Research, 14(2), 291-302.
González-Benito, Ó., Venturini, W. T., and González-Benito, J. (2017). CRM technology: implementation project
and consulting services as determinants of success. International Journal of Information Technology and
Decision Making, 16(02), 421-441.
Iriana, R., and Buttle, F. (2007). Strategic, operational, and analytical customer relationship management: attributes and
measures. Journal of Relationship Marketing, 5(4), 23-42.
Keeney, R. (1992), Value-Focused Thinking: A Path to Creative Decision-making, Harvard University Press,
Cambridge, MA.
Kumar, V., and Reinartz, W. (2016). Creating enduring customer value. Journal of Marketing, 80(6), 36-68.
Lal, P., & Bharadwaj, S. S. (2015). Assessing The Performance Of Cloud-Based Customer Relationship Management
Systems. Skyline Business Journal, 11(1).
Laurenza, E., Quintano, M., Schiavone, F., & Vrontis, D. (2018). The effect of digital technologies adoption in healthcare
industry: a case based analysis. Business Process Management Journal, 24(5), 1124-1144.
Marston, S., Li, Z., Bandyopadhyay, S., Zhang, J., and Ghalsasi, A. (2011). Cloud computing—The business
perspective. Decision support systems, 51(1), 176-189.
Minwir Al-Shammari (2009) Customer Knowledge Management: People, Processes, and Technology:
People Information Science Reference.
Park, C. H., and Kim, Y. G. (2003). A framework of dynamic CRM: linking marketing with information strategy. Business
Process Management Journal, 9(5), 652-671.
Pedron, C. D., Picoto, W. N., Dhillon, G., and Caldeira, M. (2016). Value-focused objectives for CRM system
adoption. Industrial Management and Data Systems, 116(3), 526-545.
Pedron, C. D., Picoto, W. N., Dhillon, G., and Caldeira, M. (2016). Value-focused objectives for CRM system
adoption. Industrial Management and Data Systems, 116(3), 526-545. doi:http://dx.doi.org/10.1108/IMDS-
01-2015-0018.
Poku, M. K., Behkami, N. A., & Bates, D. W. (2017). Patient Relationship Management: What the US Healthcare
System Can Learn from Other Industries. Journal of general internal medicine, 32(1), 101-104.
Porter, M., Competitive Advantage: Creating and Sustaining Superior Performance. Free Press, New York, 1985.
Roberts, M. L., Liu, R. R., and Hazard, K. (2005). Strategy, technology and organisational alignment: Key components
of CRM success. Journal of Database Marketing and Customer Strategy Management, 12(4), 315-326.
Rong, C., Nguyen, S. T., and Jaatun, M. G. (2013). Beyond lightning: A survey on security challenges in cloud
computing. Computers and Electrical Engineering, 39(1), 47-54.
Singh, S., Jeong, Y. S., and Park, J. H. (2016). A survey on cloud computing security: Issues, threats, and solutions. Journal
of Network and Computer Applications, 75, 200-222.
So, S. (2007). An Empirical Analysis on the operational Efficiency of CRM call centers in Korea. International Journal
of Computer Science and Network Security, 7(12), 171-178.
Soltani, Z., and Navimipour, N. J. (2016). Customer relationship management mechanisms: A systematic review of the
state of the art literature and recommendations for future research. Computers in Human Behavior, 61, 667-688.
Stabell C.B. and Fjeldstad, Ø. D., “Configuring Value for Competitive Advantage: On Chains, Shops, and
Networks”,Strategic Management Journal, Vol. 19, 413–437 John Wiley & Sons, Ltd, 1998
Storbacka K., “Řízení vztahů se zákazníky”, Praha: Grada Publishing, 2002.
Vaish, A., Vaish, A., Vaishya, R., & Bhawal, S. (2016). Customer relationship management (CRM) towards service
orientation in hospitals: A review. Apollo Medicine, 13(4), 224-228.
Wardley, M. and Mahowald, R. P. 2011. Next – Generation CRM: Driving Productivity with End - to - End Cloud Services
Amplifying the Power of Productivity with Microsoft Dynamics CRM and Microsoft Cloud Services, IDC,
retrieved from: http://az26122.vo.msecnd.net/docs/NextGenCRM_DrivingProductivity(229357).pdf.
Nita Sukdeo
Faculty of Engineering and the Built Environment
University of Johannesburg
Gauteng, South Africa
2006
E-mail: nsukdeo@uj.ac.za
Andre Vermeulen
Faculty of Engineering and the Built Environment
University of Johannesburg
Gauteng, South Africa
2006
E-mail: avermeulen@uj.ac.za
Abstract
With the aim to augment the number of customers in the retail sector, organisations attempt to assess customer
satisfaction and loyalty level achieved in their sector. Retail service quality (RSQ) is a fundamental factor in
determining the success of service organisations. The study aims at investigating in-store shoppers’ as well as
online shoppers’ level of satisfaction. This paper’s purpose is to correlate the quality of retail service to customer
satisfaction as well as loyalty in the framework of the retail industry in Johannesburg. The literature review
enabled the identification of key elements of loyalty of customer, the quality of service and the satisfaction
of customer. Literature has shown that the quality of service is significantly correlated with customer loyalty
customer satisfaction. With the end goal of this investigation in mind, in-store shoppers were carefully chosen,
as these customers prefer to frequent the stores due an enriched shopping experience. A structured mall intercept
questionnaire was administered to 500 in-store retail shoppers in selected shopping malls, in the greater
Johannesburg area. Simple random sampling was conducted in order to obtain a conducive sample size. A response
rate of 476 out of 500, which equates to 95%, was obtained. Online shoppers also form part of the basis of the
study, since organisations are progressing toward a digital era, shoppers can purchase item within the comfort of
their homes and take advantage of products beings delivered to their door. In this regard, an online questionnaire
was administered to 200 online retail shoppers. A response rate of 187 out of 200, which equates to 93%, was
obtained. A proposed research framework and research hypotheses were developed through the information derived
from existing researches and literature reviews, and thereafter the relevant hypotheses were tested through multiple
regression analysis. Cronbach’s Alpha Coefficient and exploratory factor analysis were employed to verify the
reliability and validity of the measuring instrument, respectively. The results of the study empirically indicated
a strong positive link between customer loyalty and service quality including the quality of service and customer
satisfaction with regard to in-store and online shoppers. This indicated that clients are happy with the quality of
service supplied by retailer stores, leading to the loyalty of customer and repeat purchases, eventually.
Keywords: Retail Service Quality (RSQ), Customer Loyalty, Customer Satisfaction, Retail Industry
1. Introduction
Due to the current business environment becoming increasingly competitive, customers tend to
become excessively demanding (Wong and Sohal, 2003). Loyalty of customers are a critical factor
for service organisations. An effective and efficient technique to guarantee that the purchases by
customers are repeated, is to supply a service that meets or exceeds the customer’s expectations
(Miller et al., 2000). The fundamental factor of success in a demanding competitive environment, is
determined by the delivery of quality services, which will grow customer satisfaction and retention
level (Spreng and Mackoy, 1996). The subject related to the satisfaction as well as the quality of
service is critical for research initiatives, as organisations attempt to enhance the quality of service,
they provide to enhance the satisfaction of their customers (Gilbert and Veloutsou, 2006). In order
for organisations to accelerate the number of their customers, enhance their loyalty, and increased
competition advantage, they endeavour to evaluate and assess customer satisfaction levels as well as
repurchase behaviour for positive business results (Gilaninia, Taleghani and Talemi, 2013).
Figure 1 represents the composition of retail sales trends from 2011 to 2017 (Statistics SA, 2017).
The past six years indicates an increase in sales in the General dealers’ sector, however, there is a
decline in sales in the textile and clothing sector. Hence, this study’s purpose was to concentrate on
the clothing sector.
2. Literature Review
2.1. Quality of Service vs. Retail Service Quality (RSQ)
As stated by Parasuraman, Zeitaml and Berry (1988) the quality of service is understood as the
holistic evaluation of an organisations service offering. This evaluation is conducted by comparing
customers’ perceptions against customers’ expectations. Through this evaluation, service
organisations can significantly enhance their competitiveness through greater market share and
higher level of customer satisfaction (Cronin and Taylor, 1992). In a study by Parasuraman et al.
(1988) it is recommended that the five dimensions of the quality of service: assurance, reliability,
tangibles, responsiveness, and empathy, are utilised to estimate the gap that exists between the
expectations as well as perceptions of service quality. It is well documented that to study the quality
of service in various sectors, researchers widely made use of the SERVQUAL scale. Oliver (1981)
postulates that retail customers react well the experience associated to purchases made in-store in
a similar way as they respond to the decisions related to their consumption of product. However,
Carman (1990) indicates that the SERVQUAL model was too basic in computing the quality of
service provided by retailers and should be adjusted based on the distincts services provided.
In order to evaluate the retail sector service quality, Dabholkar, Thorpe and Rentz (1996) established
a better all-inclusive scale called the Retail Service Quality (RSQ) scale. Preceding 1996, no
validated scale to compute RSQ ever existed (Dabholkar et al., 1996; Siu and Chow, 2003). The
following five RQS dimensions make up the scale:
i. Aspects that are Physical (PA): The layout as well as appearance of the store.
ii. Reliability (RE): Being able to keep promises and to do things right the first time.
iii. Interaction that is Personal in Nature (PI): Courteous employees, ready to help and
inspiring within customers the trust and the confidence.
iv. To be Able to Solve Problems (PS): Trained staff who are able to solve possible issues,
such as complaints laid by customers, items being returned and/or being exchanged.
v. Policy (P): Business working hours, different options available for payment, and
available space to park cars.
The dimensions of RSQ then serves as predecessors to the complete evaluation of RSQ, which in
turn effects the strength of their customer relationship. Consequently, enhanced retail service quality
is crucial to the formation of strong customer relationships. Therefore the following hypotheses were
developed:
H1: The five RSQ dimensions and customer loyalty are strongly correlated.
H2: The five RSQ dimensions and customer satisfaction are strongly correlated.
2.4. The relationship between Customer Satisfaction (CS) and Customer Loyalty (CL)
With regard to several studies conducted in order to explore the liaison of customer satisfaction
and customer loyalty, the following dimensions of service quality and customers satisfaction are
considered significant precursors for organisations to retain valuable, loyal customers. Therefore the
following hypothesis was developed:
H3: Customer loyalty and customer satisfaction are strongly correlated.
google forms had been distributed. Simple random sampling was adopted to generate a large sample
size of online shoppers.
Table 2 represents the factor loading and reliability coefficients for the online questionnaires. With
regard to reliability, each construct has an alpha coefficient of above 0.70, therefore indicating that
the online measuring instrument is acceptable and reliable. With regard to the validity of the study,
the factor loading is above 0.70, therefore indicating that the study and measuring instrument is
valid.
Table 2: Factor Loading and Reliability Analysis of Online Customers’ Questionnaire
R R2
Adjusted R2 Std. Error of Estimate
0.872 representing the R value as indicated in the above Table 3, provides a validation that the
dependent relationship is fairly strong, and it explicates 87.2% of the variable that is dependent in
nature i.e. customer loyalty.
Table 4 shows the results of the regression analysis. It pointed at the connection between the
predictors (five RSQ dimensions) and the variable that is dependent in nature, in this case being
customer loyalty (CL). Making use of the results denoted in the above Table 4, the predictable
regression model is highlighted in the following regression equivalence:
y(CL) = 0.853 + 0.678(x1) + 0.665(x2) + 0.674(x3) + 0.617(x4) + 0.612(x5)
where CL = Customer loyalty
xi = relates to each element
i
= 1, 2, 3, 4, 5
x1 = physical aspects
x2 = reliability
x3 = personal interaction
x4 = problem solving
x5 = policy
The coefficient of determination (R2) indicates the extent to which the model related to multiple
regression fits the set of data. A coefficient with value that is near zero indicates a weaker fit while a
coefficient with value that is near one indicates a good fit. The value of 0.612, in Table 3, representing
R2, shows that 61.2% of the difference in CL can be elucidated by the five predictor variables
singled out in the equation related to the regression analysis. 0.678 is the larger beta (β) coefficient,
which corresponds to physical aspects, meaning that one distinct standard deviation augmentation
in physical aspects succeeded by 0.678 standard deviation augmentation in CL. It is obvious that
physical aspects (t = 1.901) as well as problem solving (t = 1.737) both have a considerable bearing
on the loyalty of customers. Consequently, grounded on the multiple regression analysis referred to
above, the first premise (H1), is maintained.
H2 : The five RSQ dimensions and customer satisfaction are strongly correlated.
Table 5: Hypothesis Model 2
c.
Predictors: Policy, Problem solving, Personal interaction, Reliability, Physical aspects
d.
Dependent variable: Satisfaction of customer
0.817 representing the R value as indicated in the above Table 5, provides a validation that the
dependent relationship is fairly strong, and it explicates 81.7% of the variable that is dependent in
nature i.e. customer satisfaction.
Table 6 above shows the results of the regression analysis. It pointed at the connection between the
predictors (five RSQ dimensions) and the variable that is dependent in nature, in this case being
customer satisfaction (CS). Making use of the results denoted in the above Table 6, the predictable
regression model is highlighted in the following regression equivalence:
y(CL) = 0.770 + 0.282(x1) + 0.261(x2) + 0.260(x3) + 0.415(x4) + 0.118(x5)
where CS = Customer satisfaction
xi = relates to each element
i
= 1, 2, 3, 4, 5
x1 = physical aspects
x2 = reliability
x3 = personal interaction
x4 = problem solving
x5 = policy
The coefficient of determination (R2) indicates the extent to which the model related to multiple
regression fits the set of data. A coefficient with value that is near zero indicates a poorer fit
while a coefficient with value that is near one indicates a good fit. The value of 0.614, in Table 3,
representing R2, shows that 61.4% of the difference in CS can be elucidated by the five predictor
variables singled out in the equation related to the regression analysis. 0.415 is the larger beta (β)
coefficient, which corresponds to problem solving, meaning that one distinct standard deviation
augmentation in problem solving succeeded by 0.415 standard deviation augmentation in CS. It
is obvious that problem solving (t = 3.877) as well as physical aspects (t = 1.830) both have a
considerable bearing on the satisfaction of customers. Consequently, grounded on the multiple
regression analysis referred to above, the first premise (H2), is maintained.
H3: Customer loyalty and customer satisfaction are strongly correlated.
Table 7: Hypothesis Model 3
R R 2
Adjusted R2 Std. Error of Estimate
0.798 representing the R value as indicated in the above Table 7, provides a validation that the
dependent relationship is fairly strong, and it explicates 79.8% of the variable that is dependent in
nature i.e. satisfaction customer.
g.
Predictors: Access, Search, Evaluation, Transaction, Possession
h.
Dependent variable: Customer satisfaction
0.822 representing the R value as indicated in the above Table 9, provides a validation that the
dependent relationship is fairly strong, and it explicates 82.2% of the variable that is dependent in
nature i.e. satisfaction customer.
Table 10: Dependent Variable Coefficient (Customer Satisfaction)
Standardized
Unstandardized Coefficients
Coefficients
t Sig.
B Std. Error Beta
Table 10 above shows the results of the regression analysis. It pointed at the connection between
the predictors (online shopping dimensions) and the variable that is dependent in nature, in this
case being customer satisfaction (CS). Making use of the results denoted in the above Table 1, the
predictable regression model is highlighted in the following regression equivalence:
i
= 1, 2, 3, 4, 5
x1 = access
x2 = search
x3 = evaluation
x4 = transaction
x5 = possession
The coefficient of determination (R2) indicates the extent to which the model related to multiple
regression fits the set of data. A coefficient with value that is near zero indicates a poorer fit
while a coefficient with value that is near one indicates a good fit. The value of 0.631, in Table 3,
representing R2, shows that 63.1% of the difference in CS can be elucidated by the five predictor
variables singled out in the equation related to the regression analysis. 0.514 is the larger beta (β)
coefficient, which corresponds to transaction convenience (independent variable), meaning that one
distinct standard deviation augmentation in transaction convenience succeeded by 0.514 standard
deviation augmentation in CS. It is obvious that transaction convenience (t = 1.858) as well as
access convenience (t = 1.834) both have a considerable bearing on the satisfaction of customers.
Consequently, grounded on the multiple regression analysis referred to above, the first premise (H4),
is maintained.
In summary, it is evident from the in-store questionnaire analysis that customers strongly correlate
physical aspects and problem solving as predictor variables of the loyalty of customer and satisfaction
of customer. With regard to the online questionnaire, the analysis indicates that customers strongly
correlate transaction convenience and convenience of access as predictor variables of customer
satisfaction.
Under 30 152 32
30 - 40 101 21
Over 40 222 47
476
The results shown in Table 11, indicates that a high percentage of 47% belonging to the age group
of over 40 years, prefer the in-store experience associated with retail shopping. This means that
the older generation in this age group do not prefer online shopping. The results also shop that the
younger generation in the age group under 30 at 32%, also prefer doing in-store purchase as most of
them were unemployed and did not have the advantage of having a credit card for online purchases.
The results is graphically represented in Figure 4.
The findings in Table 12, indicates that there is a large percentage of in-store shoppers whom enjoy
the benefits of the in-store retail experience. The results show that in-store customers preferred
hands on problem solving techniques as well as proper store policies being implemented.
Table 12: In-Store Customer Responses
Item/Construct % Responses Overall % of Constructs
Factor 1 – Physical aspects
Visually appealing physical facilities 88
88.3
Customers easily find what they need because of the layout of the store 87
Availability of merchandise 90
Factor 2 – Reliability (Promise)
Providing a service at the time it is required 82 83.5
Promise to do something at the required time 85
Factor 3 – Personal interaction
Knowledge of the employees 89
Consistently courteous to customer 92 89.5
Perform the service right the first time 90
Individual attention 87
Factor 4 – Problem solving
Handling customer complaints directly and immediately 94
93
Ability to solve problems efficiently 92
Factor 5 - Policy
Quality of merchandise 97
Error free sales transactions and records 96 95.75
Willingly handle returns and exchanges 92
Convenient operating hours 98
Table 13 indicates a high percentage of 49% in the age group of under 30, as this generation is
technologically savvy and prefer online purchases. The lower percentage of 22% in the age group
over 40, indicated that they are not as technologically advanced and do not do online shopping. The
results is graphically represented in Figure 5.
The results in Table 14 indicates that shoppers enjoy the online shopping experience at their own
convenience and comfort of their own home without the hustle and bustle of in-store shopping. The
experience resulted in easy access to websites and user friendly search options as well as digital
transactions at the touch of a button.
Table 14: Online Customer Responses
Flexibility of time 90
93.6
Accessibility of websites 95
Website design 97
95.6
Search engine capacity 98
Download speed 92
Product information 90
91.7
Standardized or branded products 94
Pricing information 91
Confirmative reply 89
On time delivery 85
88
Product undamaged upon delivery 89
4. Conclusions
It was found that great emphasis has been put on the retail shopping experience. The general consensus
is that shoppers who are satisfied with their shopping experience will spread their experience through
word of mouth, thus enhancing the image of the organisation. The shopping experience is a feeling
associated with superior service and customer satisfaction. The findings of the study indicates that
some shoppers prefer the in-store experience with regard to ambiance and overall interaction in the
store, however, some shoppers preferred the online experience as they did not have to deal with the
traffic of shoppers in the store and long queues. It was found that there is a significant relationship
of between in-store shoppers and customer satisfaction as well as a significant relationship between
online shoppers and customer satisfaction.
References
Berry, L.L., Seiders, K. and Grewal, D. (2002), “Understanding service convenience”, Journal of Marketing, Vol. 66(3),
pp. 1-17.
Bush, A.J and Hair, J.F (1985) “An Assessment of the Mall Intercept as a Data Collection Method”, Journal of Marketing
Research, Vol. 22(2), pp. 158-167
Carman, J.M. (1990), “Consumer perceptions of service quality: an assessment of the SERVQUAL dimensions”,
Journal of Retailing, Vol. 66, Spring, pp. 55-68.
Colwell, S.R., Aung, M., Kanetkar, V. and Holden, A.L. (2008), “Toward a measure of service convenience: multiple-
item scale development and empirical test”, Journal of Services Marketing, Vol. 22(2), pp. 160-169.
Cronbach, L.J. (1951), “Coefficient alpha and the internal structure of tests”, Psychometrika, Vol. 16 No. 3, pp. 297-334.
Cronin, J.J. Jr and Taylor, S.A. (1992), “Measuring service quality: a re-examination and extension”, Journal of
Marketing, Vol. 56(3), pp. 55-68.
Dabholkar, P.A., Thorpe, D.I. and Rentz, J.O. (1996), “A measure of service quality for retail stories: scale development
and validation”, Journal of the Academy of Marketing Research, Vol. 24 No. 1, pp. 3-16.
Gauteng Province (2012) “The retail industry in the rise in South Africa”, Gauteng Provincial Treasury Quarterly
Bulletin
Gilbert, G.R and Veloutsou, C. “A cross‐industry comparison of customer satisfaction,” Journal of Services Marketing,
20(5), pp.298-308, 2006.
Gilaninia, S. Taleghani, M and Talemi, M. R. K (2013) “The impact of service quality on customer satisfaction,” Journal
of Research and Development, 1(4), pp 1-7, 2013.
Griffin, M., Babin, B. and Modianos, D. (2000), “Shopping values of Russian consumers: the impact of habituation in a
developing economy”, Journal of Retailing, Vol. 76(1), p. 33.
Heskett, J.L., Jones, T.O., Loveman, G.W., Sasser, W.E. and Schlesinger, L (1994) “Putting the service profit chain to
work”, Harvard Business Review, March –April 1994, pp.105-111
Keng, C.-J., Huang, T.-L., Zheng, L.-J. and Hsu, M.K. (2007), “Modeling service encounters and customer experiential
value in retailing: an empirical investigation of shopping mall customers in Taiwan”, International Journal
of Service Industry Management, Vol. 18(4), pp. 349-67.
Kotler. P and Armstrong. G (1996) Principles of marketing. 7th edition. New York: Prentice Hall
Stahl. M.S (1999) Perspectives in Total Quality. Milwaukee: Blackwell Publishers
Lehohla, P.J (2017) “Retail Trade Industry”, Statistics South Africa Bulletin, pp.56
Ling (Alice) Jiang, Zhilin Yang, Minjoon Jun, (2013) “Measuring consumer perceptions of online shopping
convenience”, Journal of Service Management, Vol. 24(2), pp.191-214,
Malhotra. N.K (1999) Marketing Research on Applied Orientation. New York: Prentice Hall
Maree, K (2007) First steps in Research. 1st edition. South Africa: Van Schaik Publishers
Miller, J.L, Craighead, C.W and Karwan, K.R (2000) “Service recovery: a framework and empirical investigation”,
Journal of Operations Management, Vol 18(4), pp.387-400
Oliver, R.L. (1981), “Measurement and evaluation of satisfaction processes in retail settings”, Journal of Retailing, Vol.
57 No. 3, pp. 25-48.
Parasuraman, A., Zeithaml, V. and Berry, L. (1988) “SERVQUAL: a multiple-item scale for measuring consumer
perceptions for service quality”, Journal of Retailing, Vol. 64(1), pp.12–40.
Ranganathan, C. and Ganapathy, S. (2002), “Key dimensions of business-to-consumer web site”, Information and
Management, Vol. 39(6), pp. 457-65.
Rust, R.T and Zahorik, A.J (1993) “Customer satisfaction, customer retention and market share”, Journal of Retailing,
Vol 69(2), pp. 193-215
Seiders, K., Berry, L.L. and Gresham, L. (2000), “Attention retailers: how convenient is your convenience strategy?”
Sloan Management Review, Vol. 49(3), pp. 79-90.
Siu, N.Y.M. and Chow, D.K.H. (2003), “Service quality in grocery retailing: the study of a Japanese supermarket in
Hong Kong”, Journal of International Consumer Marketing, Vol. 16(1), pp. 71-85.
Spreng, R.A and Mackoy, R.D (1996) “An empirical examination of a model of perceived service quality and
satisfaction,” Journal of Retailing, 72(2), pp 201-214, 1996.
Tiku, S and Pecht, M (2010) “Validation of reliability capability evaluation model using quantitative assessment
process” International Journal of Quality and Reliability Management 27(8) : 938-952
Wang, Y.J., Doss, S.K., Guo, C. and Li, W. (2010), “An investigation of Chinese consumers’ out-shopping motives from
a culture perspective: implications for retail and distribution”, International Journal of Retail & Distribution
Management, Vol. 38(6), pp. 423-42.
Wolfinbargerhe, M. and Gilly Mary, C. (2003), “E-tail Q: Dimensionalising, measuring and predicting e-tail quality”,
Journal of Retailing, Vol. 79(3), pp. 183-98.
Wong, A and Sohal, A. (2003) “Service quality and customer loyalty perspectives on two levels of retail relationships”,
Journal of Services Marketing, Vol. 17 Issue: 5, pp.495-513
Yang, Z. and Peterson, R.T. (2004), “Customer perceived value, satisfaction, and loyalty: the role of switching costs”,
Psychology & Marketing, Vol. 21(10), pp. 799-822.
Yang, Z., Cai, S., Zhou, Z. and Zhou, N. (2005), “Development and validation of an instrument to measure user perceived
service quality of information presenting web portals”, Information & Management, Vol. 42(4), pp. 575-589.
Sagar S Jalui
Svkm’s Nmims University’s Mukesh Patel School of
Technology Management and Engineering,
Mechanical Engineering, India
E-mail: jaluisagar@gmail.com
Suraaj Gardi
Svkm’s Nmims University’s Mukesh Patel School of
Technology Management and Engineering,
Mechanical Engineering, India
E-mail: gardisuraaj@gmail.com
Dhanashree Chityala
Svkm’s Nmims University’s Mukesh Patel School of
Technology Management and Engineering,
Mechanical Engineering, India
E-mail: dhanashreechityala.nmims@gmail.com
Jinu Kurian
Svkm’s Nmims University’s Mukesh Patel School of
Technology Management and Engineering, Operations Management, India
E-mail: Jinu.kurian@nmims.edu
Abstract
Processes for green supply chain management (GSCM) combine environmental processes with
automated processes. It involves two key deliverables–the elimination of carbon footprint and the
effective disposal of the product by eco-friendly methods from its inception to its end of life. The
overall picture currently shows that regulatory authorities have increased the number of regulations
without offering additional benefits, the cost of technology acquisition to optimize processes is
exceptionally high and the enforcement level is very low due to easy handling. While managers
report increased efficiency after implementation, economic and financial benefits remain the focus.
Some hurdles that delay the implementation of GSCM processes include lack of knowledge and
expertise, resistance to technological advances, lack of government support, customer awareness,
cost implications and uncertain events. Includes lack of knowledge and expertise, resistance to
technological advances, lack of government support, customer awareness, cost implications and
uncertain events that delay the implementation of GSCM processes. Companies are certain to
achieve long-term benefits through the use of new and advanced technologies such as IoT, AI, Big
Data, additive manufacturing and cloud computing to overcome these obstacles. In this paper, we
introduce a model that makes it easier to implement GSCM processes by considering key variables
for companies that want to optimize their processes. Identification of factors influencing GSCM.
These variables have been operationalized taking into account the management of technology.
These variables were implemented taking into account how technology management will help us
to improve these factors. To prepare a model to help predict the implementation of the GSCM,
a questionnaire was prepared to affect the current scenario in general. The model was developed
following a survey consisting of responses from key elements of the supply chain management
hierarchy. Most important variables included technology, policies and the average length of the
supply chain as well as some interaction effects. Using this model, GSCM processes can be easily
implemented on a scale of 1-5, 1–very difficult and 5–very easy. This research was conducted at an
intermediate level and can pave the way for future researchers to develop a better model that can
help predict the implementation of green processes in their supply chain in individual details. Such
models can be helpful in allocating resources efficiently to the manufacturing industry to optimize
its processes. This will help to achieve minimum regulatory requirements and achieve competitive
advantages for industries in developing countries such as India in order to survive in industry and
contribute to the growth of the country.
Keywords: Green supply chain management; Digitalisation; IOT; AI; Additive Manufacturing; Big data; Cloud
Computing
1. INTRODUCTION
The current state and trend in environmental degradation require a change in the production and
supply chain philosophy. The way manufacturing systems operate must fundamentally change.
Sustainability must be moved forward. This must be achieved by significant reductions in the use
of resources and waste generation and by withdrawing product use and disposal once. The first step
in this process is to extend the existing one-way supply chain structure to a closed loop, including
supply chain operations to recover, collect and reuse end-of-life products and packaging in recycling
and/or remanufacturing forms (Beamon, 1999).
In this globalized era, most industries cannot simply survive by optimizing corporate strategy-
based internal structures and infrastructures. The most successful manufacturers seem to be closely
linked to external suppliers and customers in unique supply chains (Zailani & Rajagopal, 2005).
With the development of Industry 4.0 technologies such as Big Data Analysis, Internet of Things,
Artificial Intelligence and Additive Manufacturing, the integration of companies into their supply
chain management processes is imperative. To achieve their implementation and supply chains in
an efficient and effective manner, the management of these technologies becomes a critical aspect
of any business.
Over the next five to ten years, supply chains will change dramatically. The current supply
chains represent a progression of careful, marginalized steps, including promotion, assembly,
appropriation. The change is disrupted by digitization; by the elimination of dividers and the creation
of a coordinated biological community that is completely straightforward for each component.
This biological community depends on a number of important computer advances— including
coordination phases, robots, testing and even additive manufacturing. People who move quickly to
digitize their production network will gain efficiency, develop new action plans and revenue streams
and have a competitive advantage (“Digitizing the Supply Chain”, 2018).
2. RESEARCH OBJECTIVES
1. To find out factors influencing GSCM processes
2. To find a relationship between factors affecting implementation of GSCM
3. To assess correlation amongst the variables influencing GSCM
4. To check for multicollinearity in identified variables
5. To develop a predictive model to calculate ease of implementation of GSCM
3. LITERATURE REVIEW
Carbon Footprint is a very important green topic recently. It is the total set of greenhouse gas
emissions from individuals, organizations, events or products directly and indirectly. Future research
can take this type of environmental subject into account to make the study more practical. Another
important issue is how to assign orders after ranking all suppliers. In recent years, data mining
techniques have also been used in the selection of suppliers. It could be promising to integrate them
into the model of selection (Kuo et. al, 2010).
4. Present Scenario
La Londe and Masters (1994) claim that “The supply chain is a set of firms that pass materials
forward”.
Sustainability and environmental issues are among the most pressing concerns for modern humanity,
governments and environmental business organisations, especially for emerging economies, to
promote organizational sustainability (Hsu et al., 2013; Fabbe Costes et al., 2014; Tseng et al., 2015).
In recent time, Dubey et al. (2015) and Zhu et al. (2012) suggest that regulatory bodies have forced
industries to improve the adoption of GSCM practices. The 21st-century organizations operate under
the strict assessment of government and NGO stakeholders or their accountability to environmental
and social concerns. Kirchoff et al. (2016) emphasize that managers are motivated by the potential
benefits associated with GSCM, including improved reputation, increased efficiency, efficiency,
differentiation and revenue growth, but the economic benefits potential is key to managing green
practices and adequate resource allocation. The different operational and organizational challenges
involved in the adoption of GSCM make it a promising field in both academia and industry (Zhu et
al., 2013).
Indian organizations reported reducing costs, increasing profitability and productivity through
improved management of the supply chain (Seuring and Muller, 2008; Ravi and Shankar, 2005).
Indian organizations have redirected their business practices by focusing on how to manage the
process, technology and competitive advantage of their suppliers (Srivastava, 2007). The SCM
process involves the extraction and exploitation of natural resources; the waste and pollutants emitted
by the supply chain were harmful and responsible for global warming and acid rain, which poses a
serious environmental risk (Hartmann and Moeller, 2014; Seuring and Muller, 2008). Green supply
chain policies are therefore desirable to reduce these environmental risks and to make companies
sustainable through the greening of their supply chain (Jayaram & Avittathur 2015; Mitra and Datta,
2014).
Although the legal framework to promote environmental protection in India is at the same level
as any other country in the world, the degree of enforcement is very low, which means that
industry gives very little priority to the environment. Although India has a regulatory framework
to ensure environmental protection, it is far behind satisfactory standards, mainly due to lack of
implementation, ease of manipulation, corruption, lack of adaptability and short-term measures.
This justifies the urgent need for the adoption of GSCM in Indian companies. The various factors
that affect GSCM are Technology & Innovation, Economics, Markets & Competition, Policy &
Regulation, Procurement & Sourcing, and Supply chain strategies & Re-engineering (MacCarthy et
al., 2016). On the basis of these factors, we will propose a model to predict how easy GSCM is to be
implemented by studying and analyzing its effects individually and together.
advanced and timely decision-making (Koetsier, 2014). The growing data volume from service and
production supply chain management (SM-SCM) is a challenge that requires tools to make full
use of data (Huang, Zhong and Tsui, 2015). The digitization of after-sales, especially spare parts
sales, is both a strategic opportunity (Wise et al., 1999) and a threat (Markillie & Baumgartner,
2012) to many original equipment manufacturers, as the focus of competition shifts from price and
quality to value delivery to customers (Vargo and Lusch, 2014). Additive manufacturing aims to
achieve this as technology improves, enhancing current technology parameters (Khajavi, Partanen
and Holmström, 2014). Additive Manufacturing could eventually lead to complete elimination of
transportation within the supply chain as designs could be shared and printed in the printing setup.
The following potential advantages of using AM machines for the distributed production of spare
parts can be summarized as follows: lower overall operation costs, lower downtime, higher potential
for customer satisfaction, lower capacity utilization, higher flexibility, higher robustness to supply
chain disruptions, reduced need for inventory management and logistics information systems, and
potential for sustainability improvements as AM machines become smaller and more energy efficient
(Khajavi, Partanen and Holmström, 2014). From the green supply chain perspective of the internet
of things, the actualization of the IoT into the complex system for green inventory management will
link the real world with the digital world seamlessly. Modelling the complex systems in the green
supply chain can be hard in a computational utilization and inventory management of relationships
exists (Chen, 2015). Potential supply chain management enhancements prevail in integration, green
collaboration and sustainability by the adoption of digitalization (Subramanian, Abdulrahman and
Zhou, 2014). A study conducted in India’s petroleum industry (Kurian et al., 2018) found that
the green supply chain improves agility, mitigates risks, promotes innovation and often leads to
innovative processes and continuous improvements. It further states that in the petroleum sector,
all product transfers in bulk must be replaced by pipeline transfers because they reduce carbon
emissions as no vehicles are involved in the receipt process. The study also emphasizes that the
greening of the supply chain provides an organization with operational and financial benefits along
with environmental sustainability. Moreover, the integration of sustainability into SCM is a key
issue for ensuring corporate competitiveness in face of dynamic ecological and social environments.
Circular economy is a contraction of cyclically closed loop liquidity economy and resource circular
economy, aims at high-efficiency resource utilization and recycling, reduction, reuse, recycling as the
principle characterized by cyclically closed loop cycle and energy echelon utilization, the economic
model that works according to the natural ecosystem circulation The circular economy is a resource-
saving economy, an ecological economy and a technologically advanced economy. Use the ideas
of circular economy and sustainable development to build a green supply chain model and carefully
design each link in the closed loop of the green supply chain, only in this way can the comprehensive
system optimization, including society, ecology and economy, advance the sustainable development
of global resources, the environment and society be achieved (Yang, 2011)
5. THEORETICAL FRAMEWORK
6. HYPOTHESIS
i. H0 = There is no relationship between factors identified and ease of implementation
of GSCM processes.
ii. H1 = There is a relationship between factors identified and ease of implementation
of GSCM processes.
iii. H0 = There is no relationship between technology & innovation and ease of
implementation of GSCM processes.
iv. H1 = There is a relationship between technology & innovation and ease of
implementation of GSCM processes.
v. H0 = There is no relationship between markets & competitors and ease of
implementation of GSCM processes.
vi. H1 = There is a relationship between markets & competitors and ease of
implementation of GSCM processes.
vii. H0 = There is no relationship between procurement & sourcing and ease of
implementation of GSCM processes.
viii. H1 = There is a relationship between procurement & sourcing and ease of
implementation of GSCM processes.
ix. H0 = There is no relationship between policy & regulations and ease of
implementation of GSCM processes.
x. H1 = There is a relationship between policy & regulations and ease of implementation
of GSCM processes.
xi. H0 = There is no presence of an interaction variable(s).
xii. H1 = There is a presence of interaction variable(s).
7. METHODOLOGY
7.2. Demographics
The questionnaire was forwarded to multiple individuals in the manufacturing supply chain, having
industrial experience of more than 5 years. Responses were collected in a period of 7 days which
generated 69 responses. The respondents comprised of Manufacturers (38.2%), Suppliers (29.1%),
Distributors (16.4%), Retailers (14.5%), and Employees (1.8%). The respondents were from the
region of Maharashtra, Gujarat, Delhi, Karnataka and a few from South Korea, Germany, London
and California. The lengths of their supply chains extended from 50 – 2000+ Kms.
0 – 50 Km 25
50 – 100 Km 75
2000+ Km 2500
0–2 1
2–4 3
4–6 5
6+ 7
The unusable (blank) responses were removed which allowed for 65 responses to be carried forward
for statistical analysis.
The data collected had to be checked for reliability first. The responses collected using the Likert
Scale were imported into SPSS Software for reliability testing. The Cronbach Alpha method of
checking the reliability of the Likert Scale obtained was 0.864 for the 65 usable responses.
Figure 2: The Cronbach Alpha Value for the Responses using SPSS Software
As the Cronbach Alpha value was greater than 0.5 – 0.6 we could say that the scale is reliable and
proceed with Statistical Analysis. Statistical Analysis was done using Microsoft Excel 2016. The
tools used were Regression and Correlation.
Figure 4: Correlation Matrix Explaining the Presence of High Correlation Amongst Independent Variables
In the above Matrix, the cells in red represent weak correlation (0 – 20%), the cells in blue represent
medium to strong correlation (20 – 50%), and the cells in green represent very strong correlation
(50 – 99%). The correlation of the independent variables with the dependent variable can be seen in
the first column with a yellow highlighted cell. It was observed that many variables such as “Ease
Tech Proc”, “Talk GSCM”, “DD/SS Change Level”, “Cost Impl v/s Benefits”, and “No. of Firms”
showed a very strong correlation with one another as compared to the dependent variable. The other
variables also showed a strong correlation with one another. Hence it can be seen that there is a high
level of multicollinearity present in the model.
Figure 5: Summary Output for Regression Analysis showing interaction Variables of all Possible Combinations
Figure 6: Regression output with 47 Observations Showing Improved R Square and Standard Error
Figure 7: Regression Output Showing the final Regression Model Considering the Interaction Effect
6. Interpretation
According to this model, the regression equation obtained was:
Where,
y = Ease of implementation of GSCM Processes (1 – 5)
x1 = Ease of Procuring Technology (1 – 5)
x2 = Ease of implementing Government Policies (1 – 5)
x3 = Distance of Procurement
x1x2 = Interaction of x1 & x2– Interaction 1
x1x3 = Interaction of x1 & x3– Interaction 2
9. CONCLUSION
Using the Literature Review, the necessary variables were identified (Jalui et. al., 2018). Using
this, an appropriate Questionnaire was developed which generated responses that gave quantified
variables. After coding the variables appropriately, a Cronbach’s Alpha value of 0.864 was obtained
which verified the reliability of the scales used to obtain the data. On doing Regression Analysis in
2 ways it was found that there was a presence of Multicollinearity present when all variables were
considered and an Interaction effect between 3 significant variables when the identified relationship
was related. The H0 for “Number of Firms” was accepted as it proved to be statistically insignificant
and removed from the Regression Model. This was as per our interpretation of MacCarthy et al.,
2016, which was consistent for all other factors except “Markets & Competitors”. It was found that
Ease of Implementation was related to the “Ease of Procuring Technology”, “Ease of implementing
Government Policies”, “Distance of Procurement”, Interaction of the first 2 and the other 2. It was
found that a major factor that governed Ease of Implementing GSCM was Procuring the technology.
This suggests that due to the increasing digitalization, the implementation of Green processes in the
supply chain is becoming more feasible and as the technology becomes more available to individuals
more easily, it will cause a radical change in supply chains providing both environmental and
economic benefits (Yang et al., 2010; Oliveira et al., 2013). Using this model, any component of a
supply chain can input the related parameters and obtain a value between 1 – 5 suggesting the level
of difficulty of implementing GSCM processes. This value can then be extrapolated into monetary
terms to make strategic decisions to maximize operational efficiency and optimal use of resources as
per Seuring and Muller, 2008; Ravi and Shankar, 2005; Srivastava, 2007. Using the interaction terms
one can consider the combined effect of the parameters and make investment decisions accordingly.
This model just provides a macro level idea of the Ease for components of Supply Chain looking
for implementing Green Supply Chain Processes in their facilities to get a broad level picture of
the first step while considering a change that will yield long term benefits. Effective management
of technologies will eventually aid in easing the process of implementation of green supply chain
management processes and help businesses gain a massive competitive advantage.
10. ACKNOWLEDGEMENT
This report is an accumulation of many people’s endeavour. We would like to express our sincere
gratitude to everyone who contributed to preparing and making this study successful. We take this
opportunity to acknowledge the indispensable assistance we received in the due course from our
Mentor Dr. Jinu Kurian, Professor, NMIMS whose expertise, understanding, generous guidance
and support made it possible for us to work on the project. We are highly indebted and thoroughly
grateful to Ms. Vanashree Mundewadi, Professor, NMIMS for her support and aspiring guidance,
during the project work. Finally, we would also like to extend our gratitude to all the respondents
who have worked in the manufacturing sector or supply chain related to manufacturing and for
giving us insights into their working methods, which was invaluable to increase our understanding
about supply chain.
REFERENCES
[IEEE 2011 International Conference on Business Management and Electronic Information (BMEI) - Guangzhou,
China (2011.05.13-2011.05.15)] 2011 International Conference on Business Management and Electronic
Information - Research on the construction and management of green supply chain based on the circular
economy
Alghamdi, S., & Bach, C. (2014). Technological Factors to Improve Performance of Marketing Strategy.
Amit, R. and Zott, C. (2001) “Value creation in e-business”, Strategic Management Journal, 22 (6-7), p493–520.
Barnatt, C. (2010). A Brief Guide to Cloud Computing. Robinson, London.
Beamon, B. (1999). Designing the green supply chain. Logistics Information Management, 12(4), 332-342. http://dx.doi.
org/10.1108/09576059910284159
Bhattacharjee, K. (2015). Green Supply Chain Management - Challenges and Opportunities. Asian Journal of
Technology & Management Research [ISSN: 2249 – 0892], 05(01).
Blanning, R., & Bui, T. (2000). Decision Support Systems and Internet Commerce. In: Handbook of Electronic Commerce,
Shaw, M., Blanning, R., Strader, T., &Whinston, A. (eds.). NY, USA: Springer-Verlag. pp.53-75.
Brady, M., Fellenz, M., & Brookes, R. (2008). Researching the role of information and communications technology
(ICT) in contemporary marketing practices. Journal Of Business & Industrial Marketing, 23(2), 108-114.
http://dx.doi.org/10.1108/08858620810850227
Chen, R. (2015). Intelligent IoT-Enabled System in Green Supply Chain using Integrated FCM Method. International
Journal of Business Analytics, 2(3), pp.47-66.
Chien, C., & Chen, L. (2008). Data mining to improve personnel selection and enhance human capital: A case study in
high-technology industry. Expert Systems With Applications, 34(1), 280-290. http://dx.doi.org/10.1016/j.
eswa.2006.09.003
Choi, T. (2018). A System of Systems Approach for Global Supply Chain Management in the Big Data Era. IEEE
Engineering Management Review, 46(1), 91-97. doi:10.1109/emr.2018.2810069
Clemons, E.K., and Hitt, L. Financial services: Transparency, differential pricing, and disintermediation. In R. Litan
and A. Rivlin (eds.) Currie, W. (2000). The global information society. Chichester: Wiley.Washington, DC:
Brookings Institution Press, 2001, pp. 87–128.
Council on Environmental Quality (1996), The 25th Anniversary Report of the Council on Environmental Quality,
Available: http://ceq.eh.doe.gov/reports.htm
Currie, W. (2000). The global information society. Chichester: Wiley.
Danese, P., 2006. Collaboration forms, information and communication technologies, and coordination mechanisms in
CPFR. International Journal of Production Research 44 (16), 3207–3226.
Digitizing the Supply Chain. (2018). Harvard Business Review. Retrieved 27 January 2018, from https://hbr.org/
webinar/2017/10/digitizing-the-supply-chain
Dubey, R., Gunasekaran, A. and Ali, S. (2015), “Exploring the relationship between leadership, operational practices,
institutional pressures and environmental performance: A framework for green supply chain”, International
Journal of Production Economics, Vol. 160, pp. 120–132.
El-Ansary, A. (2006). Marketing strategy: taxonomy and frameworks. European Business Review, 18(4), 266-293.
http://dx.doi.org/10.1108/09555340610677499
Fabbe-Costes, N., Roussat, C., Taylor, M., and Taylor, A. (2014), “Sustainable supply chains: A framework for
environmental scanning practices”, International Journal of Operations and Production Management, 34
(5), pp. 664-694.
Hagberg, J., Sundstrom, M., &Egels-Zandén, N. (2016). The digitalization of retailing: an exploratory framework.
International Journal Of Retail & Distribution Management, 44(7), 694-712. http://dx.doi.org/10.1108/
ijrdm-09-2015-0140
Hazen, B., Skipper, J., Ezell, J. and Boone, C. (2016). Big data and predictive analytics for supply chain sustainability:
A theory-driven research agenda. Computers & Industrial Engineering, 101, pp.592-598.
Holweg, M., Disney, S., Holmstrom, J., Smaros, J., 2005. Supply chain collaboration: making sense of the strategy
continuum. European Management Journal 23 (3), 170–181.
Howcroft, B., & Durkin, M. (2000). Reflections on bank-customer interactions in the new millennium. Journal of
Financial Services Marketing, 5(1), 9–20.
Hsu, C., Tan, K.C., Zailani, S.H.M., and Jayaraman, V. (2013), “Supply chain drivers that foster the development of
green initiatives in an emerging economy”, International Journal of Operations & Production Management,
Vol. 33 No. 6 pp. 656 – 688.
Huang, G., Zhong, R. and Tsui, K. (2015). Special issue on ‘Big data for service and manufacturing supply chain
management’. International Journal of Production Economics, 165, pp.172-173.
Jalui S., Chityala D., Gardi S., Acharya A., Kurian J. (2018) “Developing Strategies to Implement Green Supply Chain
Management Processes by Adopting Digitalization: A Critical Review of Literature.”, 6th Innovation Summit
& International Research Conference.
Jayaram, J. and Ayittathur, B. (2015), “Green supply chains: A perspective from an emerging economy”, International
Journal of Production Economics, Vol. 164, pp. 234-224.
Kanakamedala, K., Ramsdell, G., &Shrivastavan, V. (2003). Getting Supply Chain Software Right. McKinsey.
Khajavi, S., Partanen, J. and Holmström, J. (2014). Additive manufacturing in the spare parts supply chain. Computers
in Industry, 65(1), pp.50-63.
Kirchoff, J.F., Tate, W.L., Mollenkopf, D.A. (2016), “The impact of strategic organizational orientations on green
supply chain management and firm performance”, International Journal of Physical Distribution & Logistics
Management, Vol. 46 Iss 3 pp. 269 – 292.
Koetsier, J. (2014). Hadoop founder says future of big data looks like, well, Hadoop : VB Insight http://venturebeat.
com/2014/04/10/hadoop-founder-says-future-ofbig-data-looks-like-well-hadoop/
Kuo, R., Wang, Y., & Tien, F. (2010). Integration of artificial neural network and MADA methods for green supplier
selection. Journal of Cleaner Production,18(12), 1161-1170. doi:10.1016/j.jclepro.2010.03.020
Kurian, J., Unnikrishnan, S. and Sawant, B. (2018), A Study on Green Supply Chain Management Practices in the Indian
Petroleum Industries”, Int. J. Services and Operations Management, Vol. 31, No. 2, pp. 260-276.
La Londe, B., & Masters, J. (1994). Emerging Logistics Strategies: Blueprints for the Next Century. International
Journal of Physical Distribution and Logistics Management, 24 (7), 35-47
Lam, R., & Burton, S. (2005). Bank selection and share of wallet among SMEs: Apparent differences between Hong
Kong and Australia. Journal of Financial Services Marketing, 9(3), 204–213.
Lambert, D., Cooper, M., &Pagh, J. (1998). Supply Chain Management: Implementation Issues and Research
Opportunities. The International Journal Of Logistics Management, 9(2), 1-20. http://dx.doi.
org/10.1108/09574099810805807
Lau, E. [Speech on 30 September 1997]. Government policy on smart card applications and Internet Banking. Hong
Kong Monetary Authority.
Lee, H.L., So, K.C., Tang, C.S., 2000. The value of information sharing in a two-level supply chain. Management
Science 46 (5), 626–643.
Lin, R., Chen, R., & Nguyen, T. (2011). Green supply chain management performance in automobile manufacturing
industry under uncertainty. Procedia - Social and behavioral Sciences, 25, 233-245. http://dx.doi.
org/10.1016/j.sbspro.2011.10.544
MacCarthy, B., Blome, C., Olhager, J., Srai, J. and Zhao, X. (2016). Supply chain evolution – theory, concepts and
science. International Journal of Operations & Production Management, 36(12), pp.1696-1718.
McDonald, H., & Adam, S. (2003). A comparison of online and postal data collection methods in marketing research.
Marketing Intelligence & Planning, 21(2), 85-95. http://dx.doi.org/10.1108/02634500310465399
Mitra, S. and Datta, P. (2014), “Adoption of green supply chain management practices and their impact on performance:
an exploratory study of Indian manufacturing firms”, International Journal of Production and Operations
Management, Vol. 52 No. 7, pp. 2085-2107.
Mukhopadhyay, T. (1998). How to Win with Electronic Data Interchange in Information Technology and Industrial
Competitiveness. In: How IT Shapes Competition, Kemerer, C. (ed.). Boston, USA: Kluwer Academic
Publishers. pp. 91-106.
Nyman, H. J., &Sarlin, P. (2014). From Bits to Atoms: 3D Printing in the Context of Supply Chain Strategies. 2014 47th
Hawaii International Conference on System Sciences. doi:10.1109/hicss.2014.518
Oliveira, R.R. et al, 2013. SWTRACK: an intelligent model for cargo tracking based on off-the-shelf mobile devices.
Expert Syst. Appl. 40, 2023–2031.
P. Markillie, A third industrial revolution, The Economist, 2012, Available at: http://www.economist.com/
node/21552901 (accessed 10.01.18).
R. Wise, P. Baumgartner, Go downstream, Harvard Business Review 77 (5) (1999) 133–141.
S.L. Vargo, R.F. Lusch, Evolving to a new dominant logic for marketing, Journal of Marketing (2004) 1–17.
Selldin, E., Olhager, J., 2007. Linking products with supply chains: testing Fisher’s model. Supply Chain Management:
An International Journal 12 (1), 42–51.
Seuring, S., and Muller, M. (2008), “From a literature review to a conceptual framework for sustainable supply chain
management”, Journal of Cleaner Production, Vol. 16 No. 15, pp. 1699-1710.
Sherer, S. (2005). From supply-chain management to value network advocacy: implications for e-supply chains. Supply
Chain Management: An International Journal, 10(2), 77-83. http://dx.doi.org/10.1108/13598540510589151
Sheu, J., & Talley, W. (2011). Green Supply Chain Management: Trends, Challenges, and Solutions. Transportation
Research Part E: Logistics And Transportation Review, 47(6), 791-792. http://dx.doi.org/10.1016/j.
tre.2011.05.014
Sianaki, O. A., Yousefi, A., Tabesh, A. R., & Mahdavi, M. (2018). Internet of Everything and Machine Learning
Applications: Issues and Challenges. 2018 32nd International Conference on Advanced Information
Networking and Applications Workshops (WAINA). doi:10.1109/waina.2018.00171
Srivastava, S. (2007). Green supply-chain management: A state-of-the-art literature review. International Journal Of
Management Reviews, 9(1), 53-80. http://dx.doi.org/10.1111/j.1468-2370.2007.00202.x
Subramanian, N., Abdulrahman, M. and Zhou, X. (2014). Integration of logistics and cloud computing service providers:
Cost and green benefits in the Chinese context. Transportation Research Part E: Logistics and Transportation
Review, 70, pp.86-98.
Tseng, M.L., Lim, K.M., Wong, W.P. (2015), “Sustainable supply chain management: a closed-loop network approach”,
Industrial Management and Data System, Vol. 115 No. 3, pp. 436–461
Yang, C.-S., Lu, C.-S., Haider, J.J., Marlow, P.B., 2013. The effect of green supply chain management on green
performance and firm competitiveness in the context of container shipping in Taiwan. Transp. Res. Part E
55, 55–73.
Yiu, C., Grant, K., & Edgar, D. (2007). Factors affecting the adoption of Internet Banking in Hong Kong—implications
for the banking sector. International Journal Of Information Management, 27(5), 336-351. http://dx.doi.
org/10.1016/j.ijinfomgt.2007.03.002
Zailani, S., & Rajagopal, P. (2005). Supply chain integration and performance: US versus East Asian companies. Supply
Chain Management: An International Journal, 10(5), 379-393. doi:10.1108/13598540510624205
Zhu, Q., Sarkis, J., Lai, K.H. (2013), “Institutional-based antecedents and performance outcomes of internal and external
green supply chain management practices”, Journal of Purchasing & Supply Management. Vol. 19 No. 2
pp. 106–11
Zhu, Q., Tian, Y. and Sarkis, J. (2012), “Diffusion of selected green supply chain management practices: an assessment
of Chinese enterprises”, Production Planning & Control: The Management of Operations, Vol. 23 No. 10,
pp. 837-850
Vilas Kharat
National Institute of Industrial Engineering, Mumbai
E-mail: vilas1221@gmail.com
B. Koteswara Rao Naik
National Institute of Industrial Engineering, Mumbai
E-mail: dr.bkrnaik@gmail.com
Abstract
Project Portfolio Management (PPM) has a proven record of success in organizations. There is a
growing set of literature focussing on the success criteria of PPM. These set of standards affect
the PPM success and has an overall outcome on the business success in organizations. From the
strategic perspective, project selection plays a substantial role. In the world of a dynamic market
with colossal competition, taking up the wrong project will not only end up using resources but in
the long run, it can be critical. Indian Auto Component Industry (IACI), due to varying demands
and global competition, face the daunting task of survival in such a situation. The research paper
is written on the empirical study and focusses on the effect of project selection in the portfolio on
business success in IACI.
Keywords: Project Portfolio Management, Project Selection, Indian Auto Component Industry, Business Success
1. Introduction
In this highly competitive world with rapidly changing demand for the products, sustainability is a big
question now for any organization. Those whose are following standard practices and adapt themselves
to the changing internal and external factors, do not strive hard for success. PPM has evolved as one
such way of managing multiple portfolios, programs and projects efficiently. PPM is one of the most
thought-provoking problems in contemporary business (Cooper et al., 1997, 2001, 2006). Firstly, it
deals with future measures in an organization and the data gathered for the decisions is uncertain.
Secondly, investments in project portfolio are at different phases of completion, so it is challenging
to do the comparative analysis of the investments that are estimated. Thirdly, the organizational
environment is very dynamic because of which the status of the portfolio keeps on changing and
new data or information is made available. Finally, resources constraints are majorly impacting the
projects wherein insufficient funding for another project may take away the allotted resources for some
other projects. In the world of globalization, new business practices are motivating organizations to
reassess their competition level strategy. An organization’s success mostly depends on its capability
to grow globally. Shorter product life cycle and increasing complexity in business are forcing
the organization to work upon the strategy at the company level and aligning all the projects to it
(Petro & Gardiner, 2015). Moreover, firms have started inclining to assess their technologies from a
portfolio’s viewpoint in which the projects are assessed together relatively. Project portfolio techniques
help strategic decision makers to evaluate whether a collection of projects is acceptable from the
perspective of corporate development in long term and profitability. IACI caters to the need of the
Indian automobile industry. The companies are nowadays facing tremendous problems due to rapid
change in demands. Singh et al. (2007), carried out a survey of 75 Indian auto component manufacturers
to mention challenges faced by the automobile sector. Looking at the tremendous growth potential and
big market in India, many multinational auto companies have already established their businesses
or are planning to do so. In such a situation, there is a fierce competition to survive in the market,
not only to domestic companies but those who also collaborated with the multinational companies.
Moreover, the auto component manufacturers feel the pressure of producing high-quality component
at a lower cost, products with shorter lead time and customizing the products as per the requirement of
Original Equipment Manufacturers (Singh et al., 2007; Jain et al., 2008; Scavarda et al., 2009). The
companies need to implement new industry practices so that it will take care of the challenging tasks and
also a restructuring of the IACI is required (D’Costa, 2004). Owing to such challenges, it has become
essential for the IACI to increase its performance and competitiveness by considering more continuous
improvement approaches and impactful business practices to take advantage of the increasing business
opportunities. Moreover, to survive in the global cut-throat competitive automotive industry, developing
and emerging economies must adopt and upgrade to world-class manufacturing practices and standards
(Barnes and Morris, 2008). The companies using standard methods are expected to sustain in this
competitive world with a right margin over others. In the Indian context, there are insufficient studies
related to PPM and is mostly in the IT industry. Manufacturing industry does have their issues and
challenges and with dynamic changes in the market, this situation further gets worsened. Right from
government policies to strategy Implementation, the companies do have lost their way, resulting in
many shutdowns. PPM has a proven record in managing multiple portfolios or projects in a very
efficient manner. Cooper et al. (1997, 2001, 2006) states that PPM helps an organization to focus on
return on investment, apt balance of the portfolio and strategic alignment of the project portfolio keeping
business objectives in mind. Firms should align a portfolio of projects with their strategic business
objectives, uniting performances of its components to maximize the shareholders’ worth whereas
balancing resources and mitigating risks. The primary purpose or goal of the PPM is to identify, grade,
prioritize, select and final approval of projects or programs. Ambiguity and instability are increasing
and the decisions taken by managers on project portfolio with minimum or no information resulting in
a burden on resources and least outcome (Costantino, Di & Nonino, 2015).
2. Literature Review
Cooper et al. (2007) state that in organizations, portfolio management is implemented to select a
portfolio to achieve the following goals;
●● To exploit and maximize project portfolio value.
●● To pursue the right balance of the projects, to accomplish a stable and balanced portfolio.
●● To create a strong association with the strategy.
PPM is considered to be the model for effective resource allocation, for the selection of those projects
with the first potential that goes out to be tomorrow’s new product winners. The flawless execution
and implementation of the Project portfolio methodology are finally linked to sound innovation
management practices. The time taken during the development of new or improved strategies, when
the previous ones discarded, is said to be the most dangerous time for a company. The deviations or
changes that are going to take place in the global market have no dominance; to endure in present
day’s demanding market-place desires unusual variations in the firm’s services, products, company
functions that conceptualize, produce, progress, then market something of value to the clientele.
Projects, similar to the structure in plan and the application of a sound strategy, provide the ways to
carry the possible changes in the processes and products (Cleland, 1999: p. 91).
Many companies have project portfolio selection and associated action of managing selected projects
throughout their lifetime as the significant aspects. Similar to project management methods, which
are so commonly practiced in many industries for the activities such as research and development
(R & D) of the new products, implementing the new systems, also processes in manufacturing
and information operations and finally contracting engineering and the construction projects
(Cooper, R, 1995). But there are regularly more projects available for the selection than that is
undertaken within physical and financial constraints of the firm, so is done in making up the suitable
IAMOT 2019 | 516
The Effect of Project Portfolio Selection on Business Success: An Empirical Study in the Indian Auto
project portfolio. The Project portfolio concept, shown in figure 1 which explains project portfolio
as a collection of programs and projects and other work that are organized to facilitate the effective
management of work and to encounter and meet strategic objectives of the business (Rajegopal, 2007).
Cooper et al. (2001) wanted to learn about the levels of support of the senior management to portfolio
management, the most usual methods implemented along with their popularity and what differs the
best firms from the worst. Cooper et al. (2007) have also investigated why some firms are successful
at the product innovation and identify portfolio management and the resource allocation as among
the four primary performance drivers. These drivers depict a diamond, which at its center placed a
business’s new product performance.
Firms that wish to be competitive, by selection of the appropriate projects, must consequently use
techniques and the procedures for a portfolio selection which supported on the most critical project
measures, but these methods will not utilize if they could not be understood readily by the managerial
decision makers. Even though there is no dearth of techniques for a project assessment or evaluation
in the selection of projects, there is a comprehensive lack of a framework for establishing methods.
Some significant conclusions are taken after the analysis of the project and the program management
in relation with PPM. The projects within a program share the common objective and the projects in
portfolio share the same set of the resources (Blomquist& Müller, 2006). Gardiner (2005) to suggests
that in case of a conflict (e.g., in the selection of projects within the limited budget, or resources like
workforce, or technology, etc.) it is the dominant role of a program manager to prioritize the projects
which ensure the best complete results for a company.
In a company, PPM is on a top level compared to project management. The final goal of PPM is the
accomplishment of strategic objectives by the projects included in the portfolio. Companies have a
different attitude towards the implementation of PPM, So PPM processes differ from one company
to another.
Table 1: Effects of Non-implementation of PPM Practices in Organizations
No PPM Short-term effect Long-term effect
No strategic fit project selection standards. There is a Nonalignment of projects with The resources misused on
the firm’s strategy. improper projects.
There is a reluctance to cancel projects; Too Resources thinly spread; Too many projects More time to market;
Many projects in line. Quality declines. Increase
in failure rates.
Difficulty in go/kill choices. There is a great number of trivial projects; Less number of high
Important projects starving to get funds. performing projects.
Projects selected on emotion, Absence of Badly chosen plans. High chances of project
difficult project selection techniques; politics. failures.
Table 1 gave the effects of not implementing proper PPM practices within an organization. There is
a blurred understanding of what PPM is. Some business units claim that PPM is in full stride; others
show attention in the discipline, yielding that they do not know sufficient about it; others mention
PPM as just another method of project management with a new tag to what has been practiced for
many years, specifically project management.
Figure 2: Project Portfolio Selection Problems (Adapted from Elbok et al., 2017)
Strategic planning process further leads to multiple objectives and goals to be achieved in different
time horizons. The project selection methods are mainly dominated by statistical methods and
mathematical modeling (Elbok et al., 2017). Archer and Ghasemzadeh (1999) considered a
single objective function to solve multiple objectives and noted that linear programming, AHP
and weighted scoring are possible methods for project value determination. It seems that, though
the PPM frameworks and their well-intended portfolio evaluation and investment optimizations
during portfolio selection and planning, PPM models, are critiqued (Henriksen and Traynor, 1999),
attention managers give to portfolio activities is inadequate (Elonen and Artto, 2003) and working
with multiple projects overloads the employees (Zika-Viktorsson et al., 2006). Many companies
have project portfolio selection and associated action of managing selected projects throughout their
lifetime as the significant aspects (Cooper, 1993). But there are regularly more projects available
IAMOT 2019 | 518
The Effect of Project Portfolio Selection on Business Success: An Empirical Study in the Indian Auto
for the selection than that can be undertaken within physical and financial constraints of the firm,
so the choice must be made in making up the suitable project portfolio. PPM considers the whole
portfolio of the projects a company is working on, to make decisions regarding which projects
to be given importance and which projects are to be added to or taken out from the portfolio
(Reyck et al., 2005). There is a good number of relatively different methods that can be utilized
to estimate, assess and choose project portfolios. Scores of these techniques not extensively used
because they are too multifaceted and require much input data, they offer an inadequate treatment
of risk and uncertainty, they fail to identify interrelationships and the interrelated criteria, they
may be too complicated to understand and also use, or they could not employ in the form of an
organized process (Santos, B.L, 1989). There is no scarcity of techniques for project evaluation
in portfolio selection but still, there is a lack of a framework for establishing methods rationally in
the simple process. Presently, many firms have four most significant problems such as too many
running projects, almost double at times what a company should have; too many wrong projects
selected that will not add value to the company; projects are not related to the strategic goals of
a company (Rasiha Delilbasic, 2012). Portfolio management practices found that they support
managerial decisions towards product development and accelerate improvements in processes.
The only point where the project is located to be inconclusive was the ranking criteria for the
projects. It shows that it becomes objectively feasible to theoretically rank projects using incomplete
constraints without seeing what the outcome is (Paulo Augusto et al.2013). It further raises a question
about the seriousness of project selection in the portfolio in IACI and leads to a hypothesis:
H0: There is no positive effect of project selection on business success in IACI.
HA: There is a positive effect of project selection on business success in IACI.
Fig 3: Success Dimensions Versus Term. Adapted from Shenhar et al. (2001)
(source www.ibef.com)
The four main auto clusters in India are;
●● MPNA (Mumbai-Pune-Nashik-Aurangabad)–West zone
●● DGF (Delhi–Gurgaon–Faridabad)–North zone
●● KJ (Kolkata–Jamshedpur)–East zone
●● CBH (Chennai–Bangalore–Hosur)–South Zone
3. Research Questions
PPM techniques are the tools and policies used in successful organizations for allocating resources
among project portfolios that lead to the overall development and achievement of the firm
(Cooper et al., 2001, Levine, 2005). This research paper talks about the significance of project
selection in the portfolio in IACI and its influence on the business success of a firm. Furthermore,
relating the successful products with project selection in PPM is not possible. The products that are
launched not more than three years old in the market are considered for the research. This study
targets to investigate the following research query.
Does Project selection in the portfolio, impacts on the business success of an organization in IACI?
4. Research Methodology
This research paper explores the relationship between project selection in PPM and business success
in the purview of IACI. The first stage deals with exploratory research with a chosen method as a
literature review. Exploration directed towards reviewing all relevant information about PPM from
a strategic and operational perspective. Moreover, it also included collecting information about the
IACI. The constructs, that are used in the conceptual model also carried for the development of a
research instrument. The first stage completed by preparing the sampling method for collecting the
data. Stage II dealt with data collection in three steps–pre-test, pilot study and main study (survey).
The pre-test and pilot study was carried out before the main study to confirm optimal research
measures. The results produced from these two activities were used to improve measurement items
used in the questionnaire. The main study included the circulation of survey questionnaires to
the respondents. The research protocol was the same as that used in the pilot study. The required
number of samples derived from the requirement for executing structural equation modeling and
was based on the type of sampling method used. In Stage III, the data collected were analyzed using
statistical techniques.
The total number of responses was 387, but due to some incomplete responses the final number of
responses are 356 and are taken forward for data analysis.
5. Data Analysis
The data for the research is collected and then analyzed to find out the demographic details of
the respondents. For carrying out the study, SPSS 23.0 used. The respondents in the study were
senior managers, Deputy General Managers, plant managers, line managers and those managers
with experience varying from 1–20 yrs. The study helps us in understanding the background of the
respondent and indirectly gives an idea of the relevance of the research carried out.
Table 3 shows that from 356 valid responses collected,41.9 percent were from Tier I, 35.4 percent
from Tier II and 22.8 percent from Tier III are there. The total responses collected indicates that there
are more than 3/4th respondents belong to Tier I and Tier II companies.
Frequency Percent
< 5 YRS 58 16.3
5 -10 YRS 229 64.3
11–15 YRS 59 16.6
>15 YRS 10 2.8
TOTAL 356 100
The above table shows that the maximum respondents are in the range of 5-10 yrs. Work experience.
The percent of respondents having work experience less than five years is 16.3, in between 5-10
yrs. is 64.3, in between 11–15 years is 16.6 and more than 15 years is 2.8. The respondents are from
the top level, middle level and entry level management. Some of the organizations have people
with more than ten years of experience in the top level of management. Respondents with 5-10 yrs.
of experience play an essential role in the middle management where they form a bridge between
strategy and implementation from PPM perspective.
The above table shows that 43.3 percent of respondents are in the range of 50–100 Cr, 30.3 in
101– 500 Cr, 26.4 in 501–1000 Cr annual turnover of the companies. According to the literature
(Cooper, 2001), well-established companies, do have a positive approach towards PPM. Moreover,
research carried out in the organizations in the USA, points out that the large organization does have
standard practices followed on a regular basis.
The above table shows that 44.4 percent belong to MPNA (Mumbai-Pune-Nasik-Aurangabad), 16.6
from DGF (Delhi–Gurgaon–Faridabad), 10.1 from KJ (Kolkata–Jamshedpur) and 28.9 from CBH
(Chennai–Bangalore–Hosur).
Most of the auto component manufacturing units are situated in these clusters (Fig. 4.4).
Frequency Percent
Design & Engineering 55 15.5
Finance 38 10.7
Production 146 41.0
Supply Chain 35 9.9
Quality Assurance/ Quality Control 18 5.0
Sales & Marketing 46 12.9
Others 18 5.0
Total 356 100.0
The above table shows, the majority of the respondents are from the production Department, i.e.,
41 percent. These respondents are from various levels of the management which contributed to
the research.
From table 8, it is clear that majority of the respondents do agree that project selection is a crucial
aspect in PPM and choice of right projects will undoubtedly increase the probability of business
success. Concerning with the objective of the research is to analyze the influence of project
selection on the business success of the organization in IACI, regression analysis was carried out.
The hypotheses derived from the model were tested. The following table shows the result of the
hypothesis testing:
Table 9: Hypothesis Test Results
Null Hypotheses Spearman Coeff. P Value Significance
Project portfolio selection does not positively affect the Business success
0.774 0.028 Rejected
of an organization in IACI.
Above results show that project selection does have a positive impact on the business success of an
organization of IACI. Due to the dynamic nature of the businesses and to sustain in the cutthroat
competition, there are high chances that the organizations may pull in the projects without actually
worrying about the resources at the strategic level. Moreover, the organizations having less turnover
might go for the projects which may account for financial benefits rather than balancing the given
portfolio of projects. The practice of PPM in its real-life context is slightly messier and less rational
than the decision-process cantered frameworks (Martinsuo, 2013).
7. Conclusion
To build an optimal project portfolio in a competitive business environment is a significant concern
for every organization. The method of generating a good portfolio mix of components with excellent
potential, with many constraints, is complicated and knowledge consuming. This complexity is
mainly because of the numerous dimensions in decision making. The decision maker has to deal
with multiple criteria, multiple objectives, uncertainty and risk, interdependencies between different
components and balancing effectively with varied goals of the organization. Mostly the decision
is regularly made by top managers with dissimilar perspectives that need alignment of the projects
across the portfolio building stages. Considering the increased competition in the market, there is
a much broader scope of possible strategic directions that need the active participation of top-level
management, which helps in navigating for both long and short-term strategy. It suggests that a
commitment, both regarding actions and time, is desired. This also indicates that the management
involved in operational aspects has to be supported with a proper project methodology on individual
project level and also on a portfolio of projects. Project selection is indeed an essential phase
in PPM. The results show that there is a good understanding of project selection is there in the
organizations of IACI. But this can be only one side of the coin. A strategy should be accompanied
with an in-depth plan of implementation of it. Without the effective implementation of the strategy,
the probability of business success is reduced.
References
Aaltonen, P., (2010). Co-selection in R&D Project Portfolio Management: Theory and Evidence. Helsinki University of
Technology, Department of Industrial Engineering and Management, Doctoral Dissertation Series 2010/6,
Espoo, Finland.
ACMA–Annual Report (2014-15)
ACMA-Indian Auto components industry – Growing Capabilities and Strength (June 2011)
Arnold, M.J and K.E. Reynolds. (2003). Hedonic Shopping Motivations. Journal of Retailing. Vol. 79. p.77-95 Badan
Pusat Statistik. 2011 Kabupaten Buleleng Dalam Angka.
Almeida, M. and Soares, A. (2014). Knowledge-sharing in project-based organizations. International Journal of
Information Management, Vol. 34., No.6, pp.770-779. Approaches’, SAGE Publications, 2003.
André S. & Augusto Cauchick Miguel, Paulo. (2008). Failure mode and effects analysis (FMEA) in the context of risk
management in new product development. International Journal of Quality & Reliability Management. 25.
899-912. 10.1108/02656710810908061.
Archer, N.P. and Ghasemzadeh, F. (1999). An integrated framework for project portfolio selection. International Journal
of Project Management 17(4): 207-216
Artto K.A. and Elonen S. (2003). Problems in managing internal development projects in multi-project environments.
International Journal of Project Management 21 (6): 395–402.
Artto, K. & Dietrich, P. (2004) Strategic Business Management Through Multiple Projects. In Morris, P.W.G. & Pinto,
J.K. (eds.). The Wiley Guide to Managing Projects, Hoboken, NJ: Wiley.
Augusto, P., Miguel, C., Augusto, P. & Miguel, C. (2014). Manufacturing firm portfolio management and new product
development implementation A case study in a manufacturing firm.
Bakker, Karel & Boonstra, Albert & Wortmann, Hans. (2011). Risk Management Affecting IS/IT Project Success
Through Communicative Action. Project Management Journal. 42. 75-90. 10.1002/pmj.20242.
Barnes, J. and Morris, M. (2008). Staying alive in the global automotive industry: what can develop economies learn
from South Africa about linking into global automotive value chains. The European Journal of Development
Research, Vol. 20 No. 1, pp. 31-55.
Beringer, C., Jonas, D. & Kock, A. (2013). The behavior of internal stakeholders in PPM and its impact on success.
International Journal of Project Management, 31(6), 830–846.
Biedenbach, T., Müller, R., (2012) Capabilities and their impact on project and project portfolio performance. Absorptive,
innovative and adaptive. International Journal of Project Management 30 (5), 621–635.
Blichfeldt, Bodil & Eskerod, Pernille. (2008). PPM–There’s More To It Than What Management Enacts. International
Journal of Project Management. 26. 357-365.
Blomquist, T. and Müller, R. (2006). Middle Managers in Program and PPM: Practices, Roles and Responsibilities, PMI
Publications, USA.
Boonstra, A. (2013). How do top managers support strategic information system projects and why do they sometimes
withhold this support. International Journal of Project Management, 31(4), 498–512.
Bowen, P.A., Cattell, K., Jay, I. and Edwards, P. (2011). Value management in the South African manufacturing
industry: exploratory findings. Management Decision, Vol. 49 No. 1, pp. 6-28.
Bulmer, M. (ed.) (2004). Sage Benchmarks in Social Research Methods: Questionnaires, Sage Publications, London,
U.K Business Research 69 (2016) 3447–3458.
Burns, N. & Grove, S.K. (2003). Understanding nursing research. 3rd ed. Philadelphia: Saunders Company.
Byrne, B.M. (2010). Structural Equation Modelling with AMOS. Second edition. Taylor & Francis Group.
Canbaz, Franck Marle. (2016). Construction of project portfolio considering efficiency, strategic effectiveness, balance
and project interdependencies. International Journal of Project Organisation and Management.
Catherine P. Killen, Robert A. Hunt, Elko J. Kleinschmidt, (2008). PPM for product innovation. International Journal of
Quality & Reliability Management, Vol. 25 Iss: 1, pp. 24-38
Cauchick Miguel, PA (2008). Portfolio management and new product development implementation: A case study in a
manufacturing firm. International Journal of Quality & Reliability Management, 25 (1), 10-23.
Cleland, D.I. (1999). ‘The Strategic context of projects. In Project Management: Strategic Design and Implementation.
Third Edition. New York: McGraw-Hill, pp. 91-117.
Collis, Jill & Hussey, Roger. (2014). Business research: A practical guide for undergraduate and postgraduate students.
Churchill, G.A. Jr (1979). A paradigm for developing better measures of marketing constructs. Journal of Marketing
Research, Vol. 16 No. 1, pp. 64-73.
Cooper, J.R. (1998). A multidimensional approach to the adoption of innovation. Management Decision 36(8): 493-502.
Cooper, R.G., S.J. Edgett and E.J. Kleinschmidt (2001). Portfolio management for new product development: results of
an industry practices study. R&D Management Journal 31(4): 361-380.
Cooper, R.G. & Kleinschmidt, E.J. (1995). Benchmarking firms- new product performance and practices. Engineering
Management Review 23(3): 112-120.
Cooper, R.G., S.J. Edgett and E.J. Kleinschimidt. (1997). Portfolio management in new product development: lessons
from the leaders–Parts I & II. Research Technology Management, 40(5): 16-28 and 40(6) 43-52.
Cooper, R.G., S.J. Edgett and E.J. Kleinschimidt. (1999). New product portfolio management: practices and performance.
Journal of Product Innovation Management16(4):333-351.
Cooper, R.G., S.J. Edgett and E.J. Kleinschimidt. (2000). New problems, new solutions: making portfolio management
more effective Research Technology Management 45(6): 43 49.
Costello, A.B. & Osborne, J.W. (2005). Best practices in exploratory factor analysis: Four recommendations for getting
the most from your analysis. Practical Assessment, Research & Evaluation, 10, 1-9.
Creswell (2003). Research Design: Qualitative, Quantitative and Mixed Methods.
Dawes, John. (2012). Do Data Characteristics Change According to the Number of Scale Points Used? An Experiment
Using 5 Point, 7 Point and 10 Point Scales. International Journal of Market Research.
D’Costa, A.P. (2004). Flexible practices for mass production goals: economic governance in the Indian automobile
industry. Industrial and Corporate Change, Vol. 13 No. 2, pp. 335-367.
Dietrich, Perttu & Lehtonen, Päivi. (2005). Successful Management of Strategic Intentions through Multiple
Projects—Reflections from an Empirical Study. International Journal of Project Management. 23. 386-391.
Dye, L.D. and Pennypacker, J.S. (Eds.) (1999) PPM: Selecting and prioritizing projects for competitive advantage,
Havertown, P.A., Centre for Business Practices.
Don A. Dilman (2000). Mail and Internet surveys: The tailored design method.
Dumrak et al. (2017). Investigating Association of Benefits and Barriers in PPM to Project Success. Procedia
Engineering. 182. 274-281. 10.1016/j.proeng. 2017.03.191.
Eisenhardt and Martin (2000). Dynamic capabilities: what are they—Strategic Management Journal,1105-1121.
Elbok et al. (2017). Towards an effective project portfolio selection process. International Conference on Industrial
Engineering and Operations Management Rabat, Morocco.
Englund, R.L. and Graham, R.J. (1999). From experience: linking projects to strategy. Journal of Product Innovation
Management, 16(1): 52-64.
Engwall, Mats & Jerbrant, Anna. (2003). The Resource Allocation Syndrome: The Prime Challenge of Multi-Project
Management. International Journal of Project Management. 21. 403-409. 10.1016/S0263-7863(02)00113-8.
Filippov, S., Mooi, H., Aalders, F. & Van der Weg, R. (2010). Managing Innovation Project Portfolio: The Case of Philips
Research. Proceedings of the 7th International Conference on Innovation and Management. Pp. 819-830.
Fink, A. (1995). How to measure survey reliability and validity (Vol. 7). Thousand Oaks, CA: Sage Publications.
Fransesco Constantino et al. (2015). Project selection in project portfolio management: An artificial neural network
model based on critical success factors. International Journal of Project Management.
Gallagher, D., Ting, L. & Palmer, A. (2008). A journey into the unknown: Taking the fear out of structural equation
modeling with AMOS for the first-time user. The Marketing Review, vol. 8, no. 3, pp. 255–75.
Gardiner, P. and Gallo, M. (2007). Triggers for a flexible approach to project management within UK financial services.
International Journal of Project Management 25(5): 446–456.
Garg, R., Rahman, Z. and Qureshi, M. (2014), “Measuring customer experience in banks: scale development and
validation,” Journal of Modelling in Management, Vol. 9 No. 1, pp. 7-7.
Gerald I. Kendall, PMP & Steven C. Rollins (2003). Advanced PPM and the PMO: Multiplying ROI at Warp Speed.
International Institute of Learning, Inc.
Gerbing, D. and Anderson J. (1988). Structural equation modeling in practice: A review and recommended a two-step
approach—psychological Bulletin, 103(3), 411-423.
Griffin, A. (1997), PDMA Research New Product Development Practices: Updating Trends and Benchmarking Best
Practices. Journal of Product Innovation Management, v. 14, pp. 429-458.
Hair, J.F., Black, W.C., Babin, B.J. & Anderson, R.E. (2010). Multivariate Data Analysis. Seventh Edition. Prentice
Hall, Upper Saddle River, New Jersey.
Hambrick, D.C. &Mason, P.A. (1984). Upper echelons: The organization as a reflection of its top managers. Academy
of Management Review, 9(2), 193–206.
Haritha Saranga (2009). The Indian auto component industry-Estimation of operational efficiency and its determinants
using DEA. European Journal of Operational Research. 196. 707-718. 10.1016/j.ejor.2008.03.045.
Healy, Marilyn & Perry, Chad. (2000). Comprehensive Criteria to Judge Validity and Reliability of Qualitative Research
within the Realism Paradigm. Qualitative Market Research: An International Journal. 3. 118-126.
Heising, Wilderich. (2012). The Integration of Ideation and Project Portfolio Management–A Key Factor for Sustainable
Success. International Journal of Project Management.
Hendriks et al. (1999).Human resource allocation in a multi-project R & D Environment, resource capacity allocation
and project portfolio planning in practice. International Journal of Project Management.
Hermano, Natalia Martín-Cruz. (2016). The role of top management involvement in firms performing projects: A
dynamic capability approach. Journal of Business research.3447-3458
Hernandez et al. (2011). A Portfolio Inspired Metric for Project Selection in Construction Management. International
Journal of the organization, technology and management in construction. 264-268.
Henriksen, Anne & Jensen Traynor, Ann. (1999). A practical R&D project-selection scoring tool. Engineering
Management. IEEE Transactions on. 46. 158-170. 10.1109/17.759144.
Hinton, M., Francis, G. and Holloway, J. (2000). Best practice benchmarking in the UK. Benchmarking: An International
Journal, Vol. 7 No. 1, pp. 52-61.
Hu, L., Bentler, P.M. (1999). Cutoff Criteria for Fit Indexes in Covariance Structure Analysis: Conventional Criteria
Versus New Alternatives. SEM vol. 6(1), pp. 1-55.
Huq, F., Abbo, M.H. and Huq, Z. (2008). Perceptions about benchmarking best practices among French managers: an
exploratory survey. Benchmarking: An International Journal, Vol. 15 No. 4, pp. 382-401.
Jain, R., Rathore, A.P.S. and Yadav, O.P. (2008). The propagation of benchmarking concepts in the Indian manufacturing
industry. Benchmarking: An International Journal, Vol. 15 No. 1, pp. 101-117.
Javier Pajares, Adolfo López (2014). New Methodological Approaches to PPM: The Role of Interactions within Projects
and Portfolios. Procedia-Social and Behavioral Sciences, Vol. 119.
Jonas, D. (2010). Empowering project portfolio managers: How management involvement impacts PPM performance.
International Journal of Project Management, 28(8), 818–831.
Jöreskog, K. and Sörbom, D. (1993). LISREL 8: Structural Equation Modeling with the SIMPLIS Command Language.
Chicago, IL: Scientific Software International Inc.
Kester, L., Griffin, A., Hultink, E.J., Lauche, K., (2011). Exploring portfolio decision-making processes. Journal of
Product Innovation Management 28 (5), 641–661.
Kendall, G.I. and Rollins, S.C. (2003). Advanced PPM and the PMO: Multiplying ROI at warp speed. Boca Raton, FL,
J. Ross Publishing.
Khurana, A. & Rosenthal, S.R., (1998). Towards holistic “front ends” in new product development. Journal of Product
Innovation Management, 15(1), 57-74.
Kline, P. (1979). Psychometrics and psychology. London: Academic Press.
Kline, R.B. (2005). Principles and Practice of Structural Equation Modeling (2nd ed.). New York: Guilford.
Kleinschmidt, E.J. (2006). Establishing an NPD best practices framework. Journal of Product Innovation Management,
23 (2), 117-127.
Krishnan and Ulrich (2001). Product Development Decisions: A Review of the Literature. Management Science
INFORMS Vol. 47, No. 1, January 2001 pp. 1–21
Kumar, Ravi: Diagnostic Study Report of Auto Components Cluster Chennai (2010), http://www.msmefoundation.org/
DSR_temp/Diagnostic%20Study%20Report%20of%20Autocomponents%20Cluster%20Chennai.pdf
Kumar, S. and Chandra, C. (2001). Enhancing the effectiveness of benchmarking in manufacturing organizations.
Industrial Management & Data System, Vol. 101 No. 2, pp. 80-89.
Kwak, Y.H., Stoddard, J. (2004).Project risk management: lessons learned from the software development environment.
Technovation 24 (11), 915–920.
Leintz, B.P. and Rea, K.P. (1995). Project Management for the 21st Century, Academic Press, London.
Levine, H.A. (2005). PPM: A Practical Guide to Selecting Projects, Managing Portfolios and Maximizing Benefits.
Pfeiffer Wiley, U.K. Management, 31(6), 830–846.
Lindner, Frank & Wald andreas (2011). Success factors of knowledge management in temporary organizations.
International Journal of Project Management. 29. 877-888.
Lavie, D. (2006) Capability reconfiguration: An analysis of incumbent responses to technological change. Academy of
Management Review, 31 (1), 153-174.
Loch, C. (2000). Tailoring product development to strategy: Case of a European technology manufacturer. European
Management Journal, 18 (3), 246-258.
Mahnke, Torben Pedersen, Markus Venzin, (2009), Does knowledge sharing pay? A multinational subsidiary perspective
on knowledge outflows, in Joseph L.C. Cheng, Elizabeth Maitland, Stephen Nicholas (ed.) Managing,
Subsidiary Dynamics: Headquarters Role, Capability Development and China Strategy (Advances in
International Management, Volume 22) Emerald Group Publishing Limited, pp.123–149
Makleff, G. (2005), The Seven Habits of Highly Effective IT Portfolio Management Implementations, In Levine, H.A.
PPM: A Practical Guide to Selecting Projects, Managing Portfolios and Maximizing Benefits [M]. Hoboken,
NJ: John Wiley & Sons.
Malhotra, Naresh. (2006). Questionnaire design and scale development. The handbook of marketing research: Uses,
misuses and future advances.
Martinsuo, M. and Lehtonen, P. (2007). Role of single-project management in achieving portfolio management
efficiency. International Journal of Project Management, 25 (1), 56-65.
Martinsuo. M. (2013). PPM in practice and in context. International Journal of Project Management, 31.
Marsh, Lüdtke, Muthén, Asparouhov, Morin, A.J.S. & Trautwein, U. (2009). A New Look at the Big-Five Factor
Structure through Exploratory Structural Equation Modeling. Oxford University, UK.
Mastrogiacomo, S. et al. (2014). Talk Before It’s Too Late: Reconsidering the Role of Conversation. Journal of
Management Information Systems, Vol. 31, No.1, pp. 47-78
Melo, M., Almeida, Z., Silva, A., Brandao, A. and Moraes F. (2013). The Culture of Sharing Knowledge. Journal of
Economics, Business and Management, Vol. 1, No. 2, pp.156-160.
Meskendahl, Sascha. (2010). The Influence of Business Strategy on PPM and its Success–A Conceptual Framework.
International Journal of Project Management. 28. 807-817.
Mikkola, J.H. (2001). Portfolio management of R&D projects: implications for innovation management. Technovation
21(2): 423-435. New York, Wiley.
Moustafaev, J. (2010) Delivering Exceptional Project Results: A Practical Guide to Project Selection, Scoping,
Estimation and Management. Fort Lauderdale: J. Ross Publishing, pp. 209-224.
Muller, R and Blomquist, T (2006). Governance of program and portfolio management: Middle managers’ practices in
successful organizations. PMI Research Conference, Montreal, July 16-19.
Nobeoka, Kentaro et al. (1997). Multi-project Strategy and Sales Growth: The Benefits of Rapid Design Transfer in New
Product Development. Strategic Management Journal. 18. 169-186.
Olsson, Rolf. (2007 ). In Search of Opportunity Management: Is the Risk Management Process Enough. International
Journal of Project Management-Int J Proj Manag. 25. 745-752,.
Patanakul, P. (2015). Key attributes of effectiveness in managing project portfolio”, International Journal of Project
Management, Vol. 33, No.5, pp.1084–97
Patanakul, P., Milosevic, D., (2009). The effectiveness in managing a group of multiple projects: factors of influence and
measurement criteria. International Journal of Project Management 27 (3), 216–233.
Paulo Augusto Cauchick Miguel and Andre Segismundo, (2006). An analysis of portfolio management in new product
development: a case study in a truck company.
Peterson, R.S., Smith, D.B., Martorana, P.V. & Owens, P.D. (2003). The impact of chief executive officer personality on
top management team dynamics: One mechanism by which leadership affects organizational performance.
Journal of Applied Psychology, 88(5), 795.
Petit, Y., 2012. Project portfolios in dynamic environments: organizing for uncertainty. International Journal of Project
Management 30 (5), 539–553.
Petro, Yacoub & Gardiner, Paul. (2015). An investigation of the influence of organizational design on project portfolio
success, effectiveness and business efficiency for project-based organizations. International Journal of
Project Management. 33.
Polit, D., Hungler, B. & Beck, C. (2001). Essentials of nursing research. 5th ed. Philadelphia: Lippincott Williams & Wilkins.
Project Management Institute, Inc (2006), The standard for Portfolio Management, ISBN 13: 978-1-930699-90-8, ISBN
10: 1-930699-90-5.
PMI (2008b): A Guide to the Project Management Body Knowledge (PMBOK Guide). (4th Edition). Project Management
Institute, PA.
Rajegopal (2007). PPM: Leading the Corporate Vision. Macmillan Publishing.
Rasiha Delilbasic, (2012). PPM: A Case Study at Transportation Industry, KTH, Sweden.
Reyck et al. (2005). The impact of PPM on Information technology Projects. International Journal of Project Management.
Rodríguez, N.G., Pérez, M.J.S. & Gutiérrez, J.A.T. (2008). Can a good organizational climate compensate for lack of
top management commitment to new product development? Journal of Business Research, 61(2), 118–131.
Rozita Petrinska-Labudovikj (2014). PPM in theory and practice by MEST Journal.
Ringuest, Jeffrey & B. Graves, Samuel & H. Case, Randolph. (1999). Formulating R&D Portfolios that Account for
Risk. Research-Technology Management. 42. 40-43.
Saad, M. and Patel, B. (2006). An investigation of supply chain performance measurement in the Indian automotive
sector. Benchmarking: An International Journal, Vol. 13 Nos 1/2, pp. 36-53.
Sanchez, H., Robert, B., Bourgault, M., Pellerin, R., 2009. Risk management applied to projects, programs and
portfolios—International Journal of Managing Projects in Business 2 (1), 14–35.
Santos. B.L. (1989). Selecting Information system projects: Problems, solutions and challenges. IEEE, System Sciences
Conference, Hawaii.
Scavarda, L.F., Schaffer, J., Scavarda, A.J., Reia, A.C. and Schleich, H. (2009). Product variety: an auto industry
analysis and a benchmarking study. Benchmarking: An International Journal, Vol. 16 No. 3, pp. 387-400.
Shenhar, A.J., Dvir, D., Levy, O., Maltz, A.C., (2001). Project success: a multidimensional strategic concept. Long
Range Planning 34 (6), 699–725.
Singh, R.K., Garg, S.K. and Deshmukh, G.S. (2007). Strategy development for competitiveness: a study on Indian
auto component sector. International Journal of Productivity and Performance Management, Vol. 56 No. 4,
pp. 285-304.
Srivannaboon, Sabin & Z. Milosevic, Dragan (,2006) . A two-way influence between strategy and project management.
International Journal of Project Management 24. 493-505.
St-Pierre, J. and Raymond, L. (2004). Short-term effects of benchmarking on the manufacturing practices and
performance of SMEs. International Journal of Productivity and Performance Management, Vol. 53 No. 8,
pp. 681-699.
Supachart Iamratanakul, (2013). Project Management in Asian Car Companies. Intl. conference on technological
Innovations and Industrial Management.
Symmons, Craig (2009). The ROI of PPM Tools. Forrester Research. Available at: [http://www.planview.com/docs/
Planview-ROI-ProjectPortfolio-Management-Tools.pdf]
Tabachnick B, Fidell. L (2007). Using multivariate statistics,5th edition, Pearson.
Tashakkori, A. & Teddlie, C. (2003). Handbook of Mixed Methods in Social & Behavioural Research. Thousand
Oaks: Sage.
Tatikonda and Rosenthal, (2000). Successful execution of product development projects: Balancing firmness and
flexibility in the innovation process. Journal of Operations Management, 401-425.
Teller, J., Unger, B., Kock, A., Gemünden, H.G. (2012). Formalization of project portfolio management: the moderating
role of project portfolio complexity. International Journal of Project Management 30 (5), 596–607.
Teller, Juliane & Kock, Alexander. (2013). An Empirical Investigation on How Portfolio Risk Management Influences
Project Portfolio Success. International Journal of Project Management. 31. 817-829.
Ulusoy, G. and Ikiz, I. (2001).Benchmarking best manufacturing practices – a study into four sectors of Turkish industry.
International Journal of Operations & Production Management, Vol. 21 No. 7, pp. 1020-1043.
Unger, B.N., Kock, A., Gemünden, H.G. & Jonas, D. (2012). Enforcing strategic fit of project portfolios by
project termination: An empirical study on senior management involvement. International Journal of
Project Management.
Unger, et al. (2012) .The three roles of a PPM office: Their impact on portfolio management execution and success.
International Journal of Project Management.
Velury Vijay Bhasker (2013). Indian Auto Component Industry: A Decade of Growth and Way Forward. Research
Journal of Management Sciences Vol. 2 (3), 19-27, March.
Wheelwright, S.C. and Clark, K.B. (1992). Creating project plans to focus on product development. Harvard Business
Review 70(2): 70-82.
Yang, H. L., Wu, T.C.T (2008).Knowledge Sharing in an Organization. Technological Forecasting & Social Change,
Vol. 75 No 8, pp 1128-1156.
Yelin, K.C. (2005). Linking Strategy and PPM. In Levine, H. A. PPM: A practical guide to selecting projects, managing
portfolios and maximizing benefit. Pp. 137-145. USA: Pfeiffer Wiley.
Young, R. & Jordan, E. (2008). Top management support: Mantra or necessity. International Journal of Project
Management, 26(7), 713–725.
Young, R. & Poon, S. (2013). Top management support—Almost always necessary and sometimes sufficient for
success: Findings from a fuzzy set analysis. International Journal of Project Management, 31(7), 943–957.
Zika-Viktorsson, Annika & Sundström, Per & Engwall, Mats. (2006). Project overload: An exploratory study of work
and management in multi-project settings. International Journal of Project Management. 24. 385-394.
Huiyun Sang
shandong jiaotong university
E-mail: 672843102@qq.com
Yan Bai
Shandong Jiaotong university
E-mail: 85661417@qq.com
Yuchen Zhang
Shandong Jiaotong university
E-mail: 85661417@qq.com
Lixue Fan
Shandong Jiaotong university
E-mail: 731688344@qq.com
Bo Wang
COSCO Shipping Tanker (Dalian) co. Ltd
E-mail: Wangbo31346@126.com
Abstract
Evaluation and selection of hazardous industrial waste transport partner is a key issue for hazardous waste
generators, as hazardous and toxic industrial wastes may cause heavy damage to human and the environment if
mishandled. However, selection of the most suitable partner from a group of candidates remains a challenging task,
especially when the scheme selection issue based on the evaluation information with imprecise, uncertainty and
incompleteness. In order to solve these scheme selection issues, with a view to the effect of short-board attributes in
the decision making, a novel dynamic-weight Superiority and Inferiority Ranking under Uncertainty(DWUSIR) is
developed in this paper, based on the concept of degrees of belief and the dynamic-weight theory.
Firstly, The linguistics terms with degrees of belief is introduced to deal with the subjective expert knowledge,
the uncertain judgment of decision makers and vague, incomplete, or imprecise input data. In addition, the
conversion rules are drew up for converting the linguistics terms into triangular fuzzy number for easy calculation.
Next, Referring to the dynamic weight theory, the dynamic weight model is constructed based on a set of state
weight vector functions which is built on incentive-penalty mechanism. The variable weights are determined by
preset weights and state values of the attributes, so that the weight can reflect the influence of the short-board
attributes during the decision process. Then, in the light of combining the above theory with the SIR method, a new
dynamic-weight Superiority and Inferiority Ranking under Uncertainty (DWUSIR) for evaluation and selection
of hazardous industrial waste transport partner is put forward. Finally, A numerical example is used to verify the
validity and the feasibility of the DWUSIR.
The results of case study show that the new method can support multiple-criteria hazardous industrial waste transport
partner selection processes when both qualitative and quantitative information with or without uncertainties have to
be taken into account. The outcomes generated by the method include the ranking of the candidates and indications
of their strengths and weaknesses in the format of performance distributions over different assessment grades
presented by linguistics terms and/or a certain number. Such information is vital in helping decision makers to make
an informed selection and be aware of any risk implication associated with the selection.
The proposed method can be easily extended to deal with other multiple-criteria decision-making problems related
to Sanitation and Waste Management issues and Safety and Risk Management issues, such as assessment of risk in
hazardous materials transportation, dangerous goods transportation, supply chain partner selection and so on.
Keywords: Hazardous Industrial Waste Transport Partner, Multiple-attribute Decision Making, Uncertainty,
1. Introduction
As a result of various activities such as industry, agriculture and transportation, the quantity of waste
and pollutants is increasing day by day. Kabir et al. (2015) and Gumus et al. (2009) claims that
“In modern societies almost everything (materials, devices, objects, etc.) sooner or later becomes
waste”, among which some with one or more of the given attributes like ignitability, corrosiveness,
reactivity or toxicity will be characterised as hazardous wastes, which may present immediate or
long-term risks to humans, animals, plants, and/ or the environment when poorly handled during
transport, treatment, storage and/ or other links. So, the management of hazardous wastes has
become one of major international concern, particularly for developing countries.
In order to effectively avoid damage caused by hazardous wastes, it is necessary not only to introduce
advanced disposal technologies, but also to establish scientific and rational hazardous waste
management systems, including the choice of transport treatment and disposal facilities, allocation
of hazardous waste and waste residues from generators to treatment and disposal sites, as well as
selection of transport routes(Kabir et al., 2015). It provides sufficient raw materials for harmless
disposal and utilization of resources, thus effectively reducing the negative effects of hazardous
wastes on society, environment, economy and so on.
Hazardous wastes are high-risk during the process of movement, and it will cause heavy damage
if there’re accidents, even though the probability is small. That’s why the public pays much more
attention on the transportation accidents of hazardous wastes than the ordinary ones. So it is very
necessary to choose the best transport partner to ensure transport safety. A subsequent problem arises
as to which one would be the most proper alternative with all relevant factors taken into account.
If only a few candidates are for selection on the basis of very limited attributes, an experienced
manager may not be difficult to pick out a suitable one with confidence. However, hazardous waste
transport partner selection involves several objectives, such as cost, safety, time window and so on.
In other words, hazardous waste transport partner selection is a typical multiple-criteria decision
problem. It is not a easy problem for hazardous waste generators, especially when the scheme
selection problem based on evaluation information which is imprecise, uncertain and incomplete.
For multi-attribute decision making problems, there is barely optimal scheme, but generally the best
compromise scheme is selected according to certain rules. So how to choose the best compromise
scheme is another important question faced by decision makers. Many scholars have devoted
themselves to the research of the theory and method of multi-attribute decision during the past
years, and put forward many practical and effective methods, which are the crystallization of many
scholars intensive study, and each has its own characteristics and advantages.
The Superiority and Inferiority Ranking Method (mentioned as SIR for short in the following text)
has been widely used in solving multi-attribute decision making problems since it was proposed.
And in order to expand the scope of its application, many scholars put forward many improved
methods. For example, SIR method proposed by (Marzouk, Shinnawy et al., 2013) is utilized for
evaluation of most suitable offer for procurement of equipment installed inside a facility, whereas,
analytical hierarchy process (AHP) is used to calculate the weights of factors that influence
procurement decision. (Wang et al., 2004) proposed the a new superiority and inferiority ranking
method multiple criteria decision-making problem with incomplete information on weights used for
the multiple criteria decision making that the numerical values of alternatives of some criteria are
subject to imprecision , uncertainty and indetermination and the information on weights of criteria is
incomplete.(Chai et al., 2012)proposed a new Intuitionistic Fuzzy SIR (IF-SIR for short) approach
and focuses on its application to supplier selection which is introduced to solve the decision problem
with DM (expert/ manager/ etc.) in the form of decision group involving multiple participants and
all decision information provided in the form of linguistic terms.
In view of the above practical situation and inspired by the related research results in the field of
multiple attributes decision-making, this paper proposes a new dynamic weight SIR method under
uncertain conditions to solve evaluation and selection of hazardous industrial waste transport partner
problems based on evaluation information with fuzziness, uncertainty and/or incompleteness.
In this paper, the concept of confidence degree (Xie, Xu et al., 2008) is introduced to express the
incompleteness of evaluation information or the uncertainty and vague of expert evaluation based
on linguistic evaluation value with confidence degree structure; and based on the dynamic weight
theory (Yao and Maa , 2012, Sun, Liu et al., 2013), the dynamic weight model is constructed by
the state variable weight function. The variable weights are determined by present weights and state
values of the attributes. And then a new dynamic-weight Superiority and Inferiority Ranking under
Uncertainty (DWUSIR) for evaluation and selection of hazardous industrial waste transport partner
is put forward.
The remainder of article is organized as follows: the problem to be tackled is first defined briefly in
the second section. The proposed methodology has been presented in the third section, and in the
fifth section an illustrative example is given to demonstrate their capability. The conclusions is given
in the last section.
2. Problem Description
Because of both quantitative factors and qualitative factors are involved, it is a complex problem to
find out the best hazardous industrial waste transport partner. The most suitable hazardous industrial
waste transport partner, from the transportation firm’s viewpoint, the best solution would be the one
with the least cost, while for the government, the best solution would be the one with the least risk.
In addition to this ultimate desire, there are also many other important requirements. For example,
the transport time may be considered to measure the exposure period.
The reason that quantitative mathematical models for the hazardous industrial waste transport
partner selection problem are widely employed already is because the economy of transportation is
normally the ultimate goal of generators (Xie, 2008, Sang, 2016). However, the outcomes produced
by the approaches are not always completely satisfactory. The best transport partner for hazardous
industrial waste, which is chosen by mathematical models usually based only on the quantitative
attributes, is sometimes rejected by waste generators because of other qualitative attributes.
During the decision-making process, various attributes should to be evaluated and balanced, which
is a multifaceted activity that requires the effective use of all available information.. The purpose of
this paper is to select the best option of hazardous industrial waste transport partner which is both
satisfied by the waste generators and the government.
3. Methodology
The characteristics of selection problem of hazardous industrial waste transport partner are listed
above. In order to solve these scheme selection issues, based on the concept of belief degree and the
theory of dynamic weight, a new dynamic-weight Superiority and Inferiority Ranking (DWUSIR) is
proposed in this paper. This section describes the research methodology adopted to establish a model
of selecting an appropriate hazardous industrial waste transport firm. This model provides criteria
for waste generators to select hazardous industrial waste transport firms.
∑ j =1 w j 1=
n
= ( w j 1) (1)
Let cj (·) be the real-valued function (j=1,2,…,n) and cj(ai) be the value of alternative ai with respect
to criterion cj (i=1,2,…,m). The decision matrix D, which is showed by Eq.(2), is formed by these
criteria values :
c1 (a1 ) c j (a1 ) cn (a1 )
D = c1 (ai ) c j (ai ) cn (ai ) (2)
c (a ) c j (am ) cn (am )
1 m
An appropriate generalized criterion function ϕ (⋅) should be introduced to express the intensity of
the preference of ai over ak on criteria cj, in order to take into account value differences and more
general types of criteria:
and
m m
I j (ai )
=
=
j
k 1=
k i
k 1
∑=
P (a , a ) ∑ ϕ (c (a ) − c (a ))
j i j k
(5)
And then, based on the superiority index Sj(ai) and the inferiority index Ij(ai) we can get the superiority
matrix (S- matrix) and the inferiority matrix (I- matrix) respectively, which is listed as follows:
The S- matrix:
S1 (a1 ) S j (a1 ) S n (a1 )
S = S1 (ai ) S j (ai ) S n (ai ) or S = ( S j (ai ) )m×n (6)
S (a ) S j (am ) S n (am )
1 m
I (a ) I j (am ) I n (am )
1 m
Based on the superiority matrix and the inferiority matrix , the Superiority flow ϕ > (⋅) and the
Inferiority flow ϕ (⋅) can be calculated correspondingly , which represent the global intensity of
<
The S-flow ϕ (ai ) and the I-flow ϕ (ai ) measures how ai is globally superior and inferior to all
> <
the others. It is easy to see that the higher the S-flow ϕ > (ai ) and the lower the I-flow ϕ < (ai ) , the
better ai is. On the basis of the descending order of ϕ (ai ) , the complete ranking (S-ranking, R> ) of
>
Similarly, The I-ranking R< is obtained based on the ascending order of ϕ < (ai ) of the alternatives
as follows:
(11)
if ϕ (ai ) < ϕ (a j ) then ai P< a j ; and if ϕ (ai ) = ϕ (a j ) then ai I < a j
> > < <
In general, the above two complete rankings are different. The two complete ranking structures
(S-ranking and I-ranking) can be combined into a partial ranking structure based on the following
intersection principle. For each pair of alternatives ai and aj, we define:
a. The preference relation P by
ai Pa j iff ( ai P> a j and ai P< a j ) or ( ai P> a j and ai I < a j ) or ( ai P< a j and ai I > a j )
b. The indifference relation I by
ai Ia j iff ai I > a j and ai I < a j
c. The incomparability relation R by
ai Ra j iff ( ai P> a j and ai P< a j ) or ( ai P< a j and ai P> a j )
T = rij (12)
m×n
where rij is the criteria value of the ith alternative ai with respect to the jth criterion. The form of the
evaluation value of attributes can be expressed as follows:
rij
rij = (oij , bij , cij ) (13)
{( βij , f , h f )}
where, rij represents the evaluation information of attributes which is expressed as real numbers;
(oij , bij , cij ) represents the evaluation information of attributes which is expressed as triangular
fuzzy numbers; h f ( f = 1, 2, , N ) is the determinate rules of linguistics terms, whose value range is
shown in Table 1. β ij , f denotes the degree of belief. ( βij , f , h f ) represents the evaluation information
of attributes is expressed as the linguistics terms with degrees of belief, and represents an attribute
ej at an alternative ai is assessed to grade hf with a belief degree of β ij , f . Belief degrees are a type of
subjective probability, and they must be satisfy the following relationships (Xie, Xu et al., 2008):
0 ≤ βij , f ≤ 1 and 0 ≤ ∑f βij , f ≤ 1 (14)
when ∑β
f
ij , f < 1 , it means there is the belief degree unassigned to any specific grade, representing
Worst h1 (0.0,0.1,0.3)
Poor h2 (0.1,0.3,0.5)
Average h3 (0.3,0.5,0.7)
Good h4 (0.5,0.7,0.9)
Excellent h5 (0.7,0.9,1.0)
where, rijF is the transformed value, whose structure is same to H . H is the linguistic evaluation
grades of the ith alternative ai with respect to the jth criterion cj.
The excellent and the worst linguistics evaluation terms is assigned to the unassigned belief
respectively, and the excellent and the worst evaluation extreme value is obtained as (16) and (17):
− 5 5
r =
ijF ∑ h f ⊗ β ij , f + (1 − ∑ βij , f ) ⊗ h1
= f 1= f 1
tij 5 5
ej ∈ B (16)
r ijF
*
= ∑ h f ⊗ βij , f + (1 − ∑ βij , f ) ⊗ hN
=
f 1= f 1
− 5 5
= ∑ h f ⊗ βij , f + (1 − ∑ βij , f ) ⊗ hN
r ijF
= f 1= f 1
tij 5 5
ej ∈C (17)
r ijF
*
= ∑ h f ⊗ βij , f + (1 − ∑ βij , f ) ⊗ h1
=
f 1= f 1
The linguistic terms have been translated into triangular fuzzy numbers based on (15)-(17).
The linear normalization function is used to standardize the quantitative evaluation data measured
by the exact number:
r ij − rj−
tij = (18)
rj* − rj−
*
where rj = max
j
r ij { }
Then we obtain the normalized decision matrix as follows:
R = tij (19)
m×n
each attribute as the positive and negative ideal scheme. It is obvious that if the number of candidates
increases or decreases, it is likely to cause the change of the optimal and the worst evaluation value.
Therefore, the positive and negative ideal scheme determined in method (1) is no longer applicable. In
this paper, positive and negative ideal schemes are defined by method (2), showing as (20) and (21):
=t *j (0,
= 0, 0), t −j (1,1,1) ej ∈C
, iff
for the real number
t *j 1,=
= t −j 0 ej ∈ B
, iff
t *j 0,=
= t −j 1 ej ∈C
, iff
Calculating the difference between the options and the positive ideal solution as (22)
n
d − (ai , a* ) = ∑ d (tij , t *j ) (22)
j
and the difference between the options and the negative ideal solution as (23)
n
d * (ai , a − ) = ∑ d (tij , t −j ) (23)
j
where,
for the triangular Fuzzy number
1
d (tij , t *j ) = (tij − t *j ) = (oij − 1) 2 + (bij − 1) 2 + (cij − 1) 2
3
1
d ((tij , t −j )) = (tij − t −j ) = (oij − 0) 2 + (bij − 0) 2 + (cij − 0) 2
3
for the real number
d ((tij , t −j )) =(tij − t −j ) =
1 − tij
I=
ij P=
ij ϕ[d − (ai , a* )] (25)
Among the six common general criteria given in (Xu, 2001), Gaussian criterion has been widely
selected by users for practical applications. Therefore, we choose Gaussian criterion to reflect the
preference structure and the intensity of preference of decision makers, shown as (26):
2
ϕ (t ) = 1 − exp(−t ) (26)
2σ 2
Now, the superiority matrix and the inferiority matrix (seen Eq.(27) and Eq.(28) )can be achieved by
the superiority indexes and the inferiority indexes:
The S- matrix:
S11 S1n
S (27)
=S [ S=
ij ]m×n ij
S m1 S mn
I m1 I mn
λij ( =
I) wj ⋅ eI ij ⋅ x
(29)
where, x ∈ [0,1] is the variable weight coefficient. The smaller x, the smaller the fluctuation
amplitude of λij ( I ) is and vice versa.
The corresponding variable weight formula is denoted as follows:
IAMOT 2019 | 539
Managing Technology for Inclusive and Sustainable Growth
λij ( I ) (30)
wIij =
∑ λij ( I )
Likewise, the state variable weight function of the superiority matrix is defined as follows:
γ <=
(ai ) ∑Ij
ij ⋅wIij (34)
According to the descending order of the γ > (ai ) and the ascending order of γ < (ai ) , we obtain a
complete ranking of the alternatives respectively. And finally, the two complete ranking structures
are then combined into a partial ranking structure based on the net flow. The net flow is defined as
the following equation:
γ (ai ) γ > (ai ) − γ < (ai )
= (35)
Figure 1: Hierarchy of Assessment Criteria of the Industrial Waste Transport Partners and their Weights
where, w is the weight of the bottom index, and w* is the weight of index in two layers.
Step2: Based on Eq. 8 ~ Eq. 27, the superiority matrix and the inferiority matrix of each
candidate are obtained, as shown in the Eq. 32 and Eq. 33:
0 0 0 1 0.71 0.93 1 0.31 0 0 1
0.6 0.54 0.85 0.23 0 0.07 0.18 1 0.79 0.91 0.2
S= (37)
1 1 1 0 0.87 0 0 0.46 0.8 0.62 0
0.62 0.68 0.86 0.49 0.83 0.95 0.09 0.32 0.58 0.71 0.24
Step3: Based on Eq.28- Eq.33, the dynamic weights based on punishment-reward mechanism
are obtained respectively;
First of all, according to the Eq. 29, we obtain the inferiority index state function of each bottom
index (Let x=0. 5) and then the state variable weight function of the inferiority matrix of each
candidate is calculated as shown in Eq. 39:
0.247 0.150 0.162 0.152 0.150 0.150 0.150 0.247 0.247 0.204 0.247
0.153 0.205 0.247 0.234 0.2 0.186 0.193 0.154 0.150 0.150 0.158
λij ( I ) = (39)
0.150 0.247 0.157 0.245 0.247 0.247 0.231 0.170 0.171 0.188 0.156
0.153 0.177 0.157 0.151 0.219 0.181 0.218 0.168 0.150 0.198 0.169
Based on the state variable weight function of the inferiority matrix of each candidate, using Eq. 40,
the variable weight of each index will be the following:
0.072 0.072 0.072 0.043 0.044 0.043 0.072 0.043 0.072 0.059 0.072
0.045 0.045 0.064 0.060 0.068 0.054 0.049 0.062 0.044 0.044 0.046
w Iij = (40)
0.04 0.04 0.066 0.066 0.065 0.066 0.045 0.066 0.046 0.050 0.042
0.05 0.04 0.049 0.058 0.050 0.059 0.055 0.068 0.049 0.065 0.055
In the same way, according to (35)-(40), the superiority index state variable weight function and
variable weight of each index can be obtained.
Step4: Based on (37)-(39), the superior flow and inferior flow of each scheme are obtained
respectively. The partial ranking based on the superior flow and the inferior flow can
be obtained by sorting the superior and inferior flows respectively, which is shown in
Figure 2.
After the above four steps, the best scheme can be identified. In order to obtain the complete
ranking of all the alternatives, the net flow can be calculated based on formula (39), and be sorted in
descending order. The results are as follows:
Firm 2→Firm 4 →Firm 1 →Firm 3
According to the above ranking, Firm alternative 2 is ranked as the best among all the candidates and
Firm alternative 2 will be figured as the industrial waste transport partner, which is followed by the
Firm alternative 4, and then by Firm alternative 1 and Firm alternative 3 cordially.
Compared with the existing methods, the DWUSIR method proposed in this paper inherits all the
characteristics of the classical SIR method, and it takes into account the influence of the short board
index on the decision process in the actual decision-making scene. According to this principle, the
decision rules are introduced to form the decision scheme selection problem under the dynamic
weight. In practice, it provides an opportunity to perfect the multi-attribute comprehensive evaluation
problem in the actual decision-making scene by compatible with more kinds of evaluation values.
The results of case study show that the new method can support multiple-criteria hazardous industrial
waste transport partner selection processes when both qualitative and quantitative information with
or without uncertainties have to be taken into account. The outcomes generated by the method
include the ranking of the candidates and indications of their strengths and weaknesses in the format
of performance distributions over different assessment grades presented by linguistics terms and/ or
a certain number.
5. Conclusions
The dynamic weight SIR method proposed in this paper provides a new idea for solving the mixed
multi-attribute decision making problem with fuzzy, uncertain and incomplete information, and pays
more attention to the selection of equilibrium scheme. To some extent, it makes up for the limitation
of the classical SIR method, and widens its application. An example shows that the method is
simple, effective and reliable. In the next stage, we will deeply analyze the conversion of various
forms of evaluation data in order to further broaden the scope of application of the SIR method.
The method is flexible and can be applied to (mixed) multiple attribute decision making problems in
other disciplines, at the same time, this method is easy to be implemented in various decision support
systems to improve the efficiency of decision-making.
6. Acknowledgements
The authors are very grateful to the anonymous reviewers for their careful, insightful, and constructive
comments that led to an improved version of this paper. This work is partially supported by Ph.D
research startup foundation of Shandong Jiaotong University.
REFERENCES
Chai, J.Y. and Liu, N.K., (eds.) (2012), A new rule-based SIR approach to supplier selection under intuitionist fuzzy
Environment. International Journal of Uncertainty, Fuzziness and Knowledge based systems. 20 (3),
pp. 451-471.
Kabir, G. and Sunmi, R.S., (2015), Hazardous waste transportation firm selection using fuzzy analytic hierarchy and
PROMETHEE methods. International Jounal Shipping and Transport Logistics, 7(2), pp.115-136.
Kabir, G., (2015), Selection of hazardous industrial waste transportation firm using extended VIKOR method under
fuzzy environment. International Journal of Data Analysis Techniques and Strategies , 7(7), 40-58.
Marzouk, M. and Shinnawy, N., (eds.) (2013), Measuring sensitivity of procurement decisions using superiority and
inferiority ranking. International Journal of Information Technology &Decision Making, 12(3), 395-423.
Sun, X. and Liu,Y., (eds.) (2013), Feaure selection using dynamic weights for classification. Knowledge-Based Systems,
37(1), 541-549.
Wang, J.Q., (2004), Superiority and inferiority ranking method for multiple certria decision making with incomplete
information on weights. Systems Engineering and Electronics, 26 (9), 1205-1208.
Xie, X., L. and Xu D., L., (eds.) (2008), Ship selection using a multiple-criteria synthesis approach, Journal of Marine
Science and Technology, 13(1), 50-62.
Xu, X., Z., (2001), The SIR method: a superiority and inferiority ranking method for multiple criteria decision making.
European journal of operational research,131, 587-602.
Ma, Z, J. and Zhang, N., (eds.) (2014), A novle SIR method for multiple attributes group decision making problem under
hesitant fuzzy environment. Journal of intelligent and fuzzy systems, 26 (5), 2119-2130.
Yao, R. and Maa, G., (2012), Tendering evaluation method of hydraulic projects based on variableweight. Procedia
Engineering, 31, 868-873.
Sun, X. and Liu, Y., (eds.) (2013), Feaure selection using dynamic weights for classification. Knowledge-based systems,
37, 541-549.
Sang, H., Y., (2016), Study on The Application Demonstration and Deployment of Self-propelled Semi-submersibe
Maintenance Platform, Published doctoral dissertation, Dalian Maritime University, School of
Transportation Management.
M. Karthick
Safety Research Institute, Atomic Energy Regulatory,
Board, Kalpakkam, India–603102
E-mail: mkarthik@igcar.gov.in
T. Paul Robert
Department of Industrial Engineering, Anna University,
Chennai, India–600025
E-mail: prpaul@annauniv.edu
C. Senthil Kumar
Department of Industrial Engineering, Anna University,
Chennai, India–600025
E-mail: cskumar@igcar.gov.in
Abstract
The evolution and analysis of computational models of cognition in Human Reliability Analysis (HRA) is typically
ad-hoc. Human reliability is a complex subject which cannot be addressed straightforward reliability models like
those for components and systems. The study of how cognition affects the operator’s performance in complex
systems such as nuclear power plants (NPP) is a challenging task for engineers, psychologists and human factor
experts. The natural complexity and variability of ordinary human behavior creates a necessity for significant
methodological model in cognitive research. Modeling the behavior of operators in NPPs in transient condition
implies primarily the simulation of primitive cognitive process performed by the operators. Human Cognitive
Reliability (HCR) is one such cognitive model in HRA, which was developed for quantification of crew success
probability as a function of normalized time, in which three kinds of human cognitive behaviors viz. Skill-based,
Rule-Based and Knowledge-based were modeled. In this paper, the issues identified in the HCR model are
discussed in the perspective of the consideration of human cognitive errors managing complex plants. The objective
is to determine the optimal critical cognitive coefficients which would minimize the human error probability.
To deal with the objective function, a modified genetic algorithm is proposed in this paper. Orthogonal Array is
applied to calibrate the initial parameters of the HCR model into provides reliable solution. The parameters of the
algorithm are discussed in detail and the proposed heuristic is found to be very effective in yielding optimal or
near-optimal solution when compared to other popular heuristics.
Keywords: Modified Genetic Algorithm, Optimization, Human Cognitive Reliability Model, Cognitive Error, Human
Reliability Analysis
1. Introduction
Since the main control room in the Nuclear Power Stations (NPP) has now shifted from analog to
digital control system, the existing Human Reliability Model (HRA) should be upgraded. The Human
Cognitive Reliability (HCR) model is one of the well-known cognitive HRA models, in which the
parameters and cognitive coefficients for Skill-based, rule-based and knowledge based actions are
derived from the conventional control room (Zhang et al., 2007; Sun et al., 2011; Licao et al., 2011).
The optimal cognitive coefficient is to be determined in the HCR model to minimize the human
error during operations. Generally, two major ways have been used to modify the human cognitive
coefficient. The first way is by using the simulators studies and the second way is by using the
optimization algorithms. Though the cognitive coefficients can be modified easily in the first way,
the simulators have limited flexibility to manipulate plant parameters and operational situations and
it consumes huge cost and time (Wu and Yoshikawa, 1997; Sun et al., 2011). Using the second way
is to choose the optimal cognitive coefficient levels; the level can be determined easily, and the cost,
time, etc. will be decreased as well, since the cognitive coefficients in HCR model has already been
established. The parameters derived for that model are already been validated and accepted by the
HRA community (Sharma, 2008; Licao et al., 2011). Hence, the second approach is used in this
study to determine the optimal cognitive coefficient to enhance human performance. Such problems
of minimizing human error probability through optimal cognitive coefficient choices are called the
‘‘Human Cognitive Coefficient Optimization (HCCO) problem’’. The higher demand for more
reliable and safe operation requires further study of the reliability optimization. Thus, more accurate
and efficient methods are needed in finding the optimal coefficient; otherwise, the safe operation by
an operator during the emergency situation cannot be achieved.
In order to cope with modifying HCR cognitive coefficient arising in HRA in Probabilistic Safety
Assessment (PSA) studies, important contributions have been made since 1990. Wu and Yosikawa
(1997) assessed the operator cognitive behaviors using simulator experiments and estimate the
non-response probability of operator using HCR method. Zhang et al. (2007) derived new co-efficient
Ai, Bi, Ci for Skill based, rule based and knowledge based action through the simulator experiments
in Quinson NPP. The parameters were computed by utilizing Weibull distribution and lognormal
distribution. Results revealed that the derived new data has not much significant difference with
IAEA and ORE dataset. Sun et al. (2011) analyzed the risk of inadequate flight separation based
on HCR model and also the consequences of such incidents depend on the abilities and mental
state of the pilots and air-traffic controllers. Licao et al. (2011) applied Weibull distribution to
modify the original HCR co-efficient A, B and C, for SB, KB and, RB actions through simulator
experiments in Chinese NPPs. However, most attributes have been derived from the simulators.
Simulators are more difficult to use because they have more complex systems and will have a great
deal of cost. To solve this difficulty, Heuristic algorithms (HA) are a good solution. Though the
HA was not used in HRA, was successfully applied in PSA studies in NPPs. For example, Lapa
et al. (2000) developed an efficient genetic algorithm based on Weibull distribution to find an
optimum scheduling to the preventive maintenance of a nuclear safety system to minimizing the
failure probabilities. Volkanovski and Cizelj (2014) developed a method for maintenance scheduling
optimization of safety system components of the nuclear power plant. The optimal solution was
obtained with genetic algorithm.
The major focus of recent work in the reliability studies in PSA is on the development of heuristic/
meta-heuristic algorithms to address the reliability issues in the safety utility. Genetic algorithm, the
most widely used heuristic algorithms, has attracted more recent attention in nuclear field including
the reliability problems. It has many advantages over other heuristic algorithms viz. it search parallel
from a population of points, uses probabilistic selection rules, can find fit solutions in a very less
time, support.
Multi-objective optimization, work well on mixed discrete/ continuous problem etc
(Yusup et al., 2012; Kar, 2016). Nowadays, new algorithms are evolving through modifying the
conventional algorithms, in which intrinsic parameter are modified, so as to design most efficient
algorithm. For example, the Genetic algorithm can be modified by reshaping or altering the intrinsic
parameters such as crossover, mutation, and chromosome selection operations. For example, the
crossover operator is a key factor in selecting individuals from population to create offspring. Various
modifications have been made on crossover to produce offspring in conventional GA viz. optimized
crossover operator (Nazif et al., 2010), one cut point crossover (Zhang and Gen, 2005), NOX
crossover operator (Zhong-yue et al., 2010).
In this paper, we propose a Modified Genetic Algorithm (MGA) of HCCO model for HCR.
The study is aim to achieve an optimal solution for HCCO of HCR with the following accompanying
target: To minimize the human error through optimizing the cognitive coefficient.
The rest of the paper is arranged as follows. In section 2, HCCO is formulated and the problem
is briefly explained. In section 3, the proposed approach is described. In section 4, computational
results are discussed. Finally conclusions are summarized in section 5.
where,t is time for diagnosis/ action to be performed, Tmis median time for the action/ diagnosis and
t/Tm is the response time allowed for a reacting to a certain event. Ai, Bi and Ci are the coefficients
which correspond to skill-based behavior (SB), rule-based behavior (RB) and knowledge-based
(KB) behavior respectively. The coefficient for various human behaviors is shown in Table 1.
Table 1: Coefficient for Cognitive Process Type
Type of human Ai Bi Ci
Behaviour
SB 0.407 0.700 1.200
RB 0.601 0.600 0.900
KB 0.791 0.500 0.800
Cognitive Coefficient optimization in HCR Model in HRA studies is useful to assess true human
error probability and to minimize the human error (Pan et al., 2016). Typically, the three behaviors
are studied exclusively, that is, the operators are presumed to possess either SB or KB or RB
behaviour. Cognitive coefficient optimization problems are categorized into seven typical problems
according to the type’s cognitive behaviors: SB, RB, and KB, combination of SB-RB, RB-KB,
SB-KB and integration of S-R-K Based.
The operators follow one of these strategies of using their innate or acquired skill to resolve a
problem or they use the knowledge they had learnt over time to respond to an incident or they follow
the procedures and rules laid down at the advent of an untoward incident. However, an operator can
possess all three characteristics and could utilize the same simultaneously, thus, in this study; all
three possible behavior traits are taken into account. The formulation of the three-parameter Weibull
distribution model in general forms as follows:
Minimize Z = exp(- s
)+exp(- )+ exp(-
k r
) (2)
where Z is non- response probability of the operator, Ais, Bis and Cis are coefficients for Skill-based
behavior, Aik, Bik and Cik are coefficients for rule-based behavior and Air, Bir and Cir are coefficients
for knowledge-based behavior.
Chromosome Ai s
Bis Cis Aik, Bik Cik Air Bir Cir Fitness value
1 0.271 0.233 0.8 0.2 0.601 0.9 0.333 1.055 1.601 4.96062E-05
2 0.271 0.233 0.8 0.6 0.801 1.8 0.166 0.527 0.8 5.03883E-05
3 0.814 0.233 2.4 0.4 0.4 1.8 0.5 1.055 1.067 0.000116095
4 0.814 1.4 1.6 0.2 0.2 1.2 0.333 0.791 0.8 0.000516017
5 0.814 0.933 1.2 0.4 0.2 1.8 0.333 0.264 1.601 0.001015325
6 0.136 1.4 2.4 1.2 1.202 1.8 1 1.582 1.601 0.001132166
7 0.136 0.933 1.6 0.8 0.801 1.2 0.666 1.055 1.067 0.00193146
8 0.543 1.4 1.2 0.2 0.801 0.6 0.666 0.527 1.601 0.002066754
9 0.136 1.4 2.4 0.6 0.801 0.9 0.333 0.264 1.067 0.003148117
10 0.543 0.467 2.4 0.6 0.2 1.2 0.166 1.055 0.533 0.004467142
3.2.3. Crossover
In the proposed MGA, the order of selection and crossover operations are swapped. The crossover
of every chromosome with every other chromosome is carried out to explore all the possibilities.
The crossover probability is not defined since every chromosome is crossed over with the remaining
chromosomes.
3.2.4. Mutation
To produce good genes that were lost by chance through poor selection of mates, mutation
probability has been assumed as 0.01. In selection process, the chromosomes are selected using
Roulette Wheel Selection.
Z Objective Function
C Chromosome
Z* Best Fitness Value Obtained
C* Best Chromosome
L Length of Chromosome
R Random Number Following Normal Distribution
M Mean
S Standard Deviation
r Random Number Following Uniform Distribution
t_gen Total Number of Generations
mutprob Mutation Probability (0.01)
Input pop_size, g, pa, temp, L
For ig=0, generate pop_size, initial population:
●● For bit 1 to L, generate R = N[ML,SL]
●● Compute Z
●● Determine Z* and store corresponding C*
Perform crossover for all chromosomes:
●● Make duplicates of initial population, two duplicates for first chromosome, i (P and Q)
and one duplicate for the second chromosome j (V)
●● Generate r = U[1,9], to determine crossover point
●● for i=1 : (pop_size-1) and j= 2: pop_size (i and j are the two chromosomes selected for
crossover)
●● Perform crossover by P(1, r : end) = V(1, r : end) and V(1, r : end) = Q(1, r : end)
●● One-to-one crossover yields many possibilities. Eliminate recurring values of objective
function to reduce redundancy. [~,idu]=unique (OBJECT (:, 10)), OBJECTIVE=OBJECT
(idu,:)
●● If the number of unique values obtained after crossover operation > pop_size,
PP = OBJECTIVE (randperm(length(OBJECTIVE), pop_size))
●● Else, PP=OBJECT(randperm(length(OBJECT),pop_size))
●● Compute Z for all C in PP
Selection of chromosome using Roulette Wheel Selection:
●● for i = 1:pop_size, compute F = 1+ 1. Also compute Fn = F/ƩF for all the
●● Next step, compute the Fa = cusum (Fn). Generate random number r =U[0,1].
●● Set flag =0. For i=1:pop_size,
●● if r < Fa, that chromosome a is added to the mating pool MP(i,1:9) = PP(a,1:9) and the
value of the flag is updated as flag =1. Loop is terminated and flag is reset.
●● Else, loop is terminated, i= i++. This step is repeated till i=pop_size.
●● The final mating pool proceeding to mutation is updated, MP (1:20, 1:9).
Mutation operation:
●● Generate a random number r = U[0,1]
●● Check if r < mutprob. If yes, then proceed with mutation
●● Generate r = U [1, pop_size] to determine the chromosome to mutate
●● Determine the gene to mutate within the chromosome, generate r = U[1,L]
●● C(r,rg) = R, where R = N[M,S], rgth gene of the rth chromosome is randomly mutated
●● Else, r>0.01, proceed.
Next g:
●● If g > t_gen, terminate search and report Z* and C*
●● Else, g<=t_gen, repeat until stopping criterion is reached and update Z* and corresponding
C*
From the results, it can be concluded that our approach outperforms in terms of better solution on
HCCO with a less computational time. The graph for both MGA and GA is shown in Figure 2.
The figure 2 the clearly shows that the best result is obtained at 14th generation. No improvement
is observed after the 14th generation. Though the conventional algorithm quickly converges than
proposed MGA, it yields fitness value less than that of the proposed approach.
4. Conclusion
A modified genetic algorithm has been proposed to optimize the cognitive coefficient for the Human
Cognitive Reliability (HCR) model. The existing HCR provides independent cognitive coefficient of
each of Skill based, rule based and knowledge based behavior independently. In this study, all three
human behaviors in the HCR are considered simultaneously to overcome the lack of understanding
regarding which behaviour is accessed in the case of an emergency, and the optimal value is obtained
through the proposed algorithm. The parameters of the proposed algorithm were tuned using the
Orthogonal Array. The proposed MGA improves the local search ability of the original GA approach
to solve the HCCO problem. In order to verify the optimization performance of the proposed
approach, it has been compared against with Conventional GA. Results revealed that the proposed
approach outperforms than GA. This research is one of the pioneer works that improve the existing
HCR model in HRA with considering all the three behavior altogether, for which a mathematical
model was derived and a modified heuristic algorithm was developed to solve it. For future work
extensions, the followings are recommended.
1. Presenting the HCCO model in an uncertain environment that is closer to reality.
For instance, coefficient for combined actions SB-KB, KB-RB and SB-RB can
be developed.
2. Some other meta-heuristics such as the Simulated Annealing, Ant Colony Optimization and
Particle Swarm Optimization (BAs) can also be employed to find approximate solutions.
3. Simulators can be used to verify the obtained coefficients and to establish more accurate
cognitive coefficient.
References
Andrija Volkanovski and Leon Cizelj, 2014. Nuclear Power Plant Maintenance Optimization with Heuristic Algorithm,”
Science and Technology of Nuclear Installations, vol. 2014, Article ID 458016, p.13.
Arpan Kumar Kar. Bio inspired computing–A review of algorithms and scope of applications. Expert Systems with
Applications, 2016, 59: 20-32.
Celso M.F. Lapa, Cláudio M.N.A. Pereira, Antônio Carlos de A. Mol, 2000. Maximization of nuclear system availability
through maintenance scheduling optimization using a genetic algorithm, Nuclear Engineering and Design.
196(2), 219-231.
D. Kancev, B. Gjorgiev and M. Žepin, 2011. “Trade-off between unavailability and uncertainty in nuclear industry:
An application of multi-objective genetic algorithm approach,” Proceedings of the 2011 3rd International
Youth Conference on Energetics (IYCE), Leiria, 1-9.
H. Nazif, L.S. Lee. Optimized crossover genetic algorithm for vehicle routing problem with time windows. American
Journal of Applied Science. 7 (1) (2010) p. 95.
H. Zhang and M. Gen, “Multistage-based genetic algorithm for flexible job-shop scheduling problem,” Complexity
International. 11(223–232), 2005.
Hannaman, G.W., Spurgin, A.J. & Lukic, Y. A model for assessing human cognitive reliability in PRA studies. United
States: IEEE Service Center. 1985.
K. Antony Arokia Durai Raj, Chandrasekharan Rajendran. A genetic algorithm for solving the fixed-charge transportation
model: Two-stage problem, Computers & Operations Research, 2012, 39 (9): 2016-2032.
Karthick, M., Senthil kumar, C. & Paul Robert, T. BAYES-HEP: Bayesian belief networks for estimation of human error
probability. Life Cycle Reliability and Safety Engineering, 2017, 6(3): 187-197.
Li Zhang, Xuhong He, Li-Cao Dai, Xiang-Rui Huang. The simulator experimental study on the operator reliability of
Qinshan nuclear power plant. Reliability Engineering & System Safety, 2007, 92 (2), 252-259.
Licao Dai, Zhang Li, Pengcheng Li. HRA in China: Model and data, Safety Science, 2011, 49
Mahendra Prasad, A.J. Gaikwad. Human error probability estimation by coupling simulator data and deterministic
analysis. Progress in Nuclear Energy, 2015, 81: 22-29.
Mohamed Elhoseny, Alaa Tharwat, Aboul Ella Hassanien,2018.Bezier Curve Based Path Planning in a Dynamic Field
using Modified Genetic Algorithm. Journal of Computational Science, 25,339-350.
N. Sowmiya, B. Valarmathi, N. Srinivasa Gupta, P. Essaki Muthu, C. Rajendran. A Novel Genetic Algorithm for Solving
Machine Part Cell Formation Problem considering alternative Process Plans, Materials Today: Proceedings,
2018, 5(5), Part 2: 13574-13584.
Norfadzlan Yusup, Azlan Mohd Zain, Siti Zaiton Mohd Hashim. Evolutionary techniques in optimizing machining
parameters: Review and recent applications (2007–2011. Expert Systems with Applications, 2012, 39 (10):
9909-9927.
S. Zhong-yue, G. Zhong-liang, W. Qin. An improved adaptive genetic algorithm for vehicle routing problem. Logistics
Systems and Intelligent Management, 2010 International Conference on 1, 116–120. IEEE, January (2010).
Sharma S.K., 2008. Human reliability analysis: A compendium of methods, data and event studies for nuclear power
plants (TEC. DOC. NO.AERB/NPP/TD/O-2). Atomic Energy Regulatory Board, Mumbai.
Sun, Ruishan; Chen, Yunfei; Liu, Xinyi; Peng, Tianchi; and Liu, Lu “A Method of Analysis Integrating HCR and ETA
Modeling for Determining Risks Associated with Inadequate Flight Separation Events,” Journal of Aviation
Technology and Engineering, 2011, 1(1), Article 5.
V. Jothiprakash and Ganesan Shanthi. Genetic Algorithms for Multireservoir System Optimization. ISH Journal of
Hydraulic Engineering, 2006, 12:3: 72-82.
Venkatesh Arasanipalai Raghavan, Sang Won Yoon, Krishnaswami Srihari, 2018. A modified Genetic Algorithm
approach to minimize total weighted tardiness with stochastic rework and reprocessing times. Computers &
Industrial Engineering, 123, 42-53.
Wei Wu and H. Yoshikawa, “A pilot study on human cognitive reliability (HCR) by human model simulation,”
Proceedings Intelligent Information Systems. IIS’97, Grand Bahama Island, Bahamas, 1997: 95-99.
X. Pan, Y. Lin, C.He. A Review of Cognitive Models in Human Reliability Analysis. Quality and Reliability Engineering
International, 2016.
G. Kanagaraj, S.G. Ponnambalam, N. Jawahar. 2013.”A hybrid cuckoo search and genetic algorithm for reliability–
redundancy allocation problems”, Computers & Industrial Engineering, 66 (4), 1115-1124.
Moieni, P. 1994. “Advances in human reliability analysis methodology. Part I: frameworks, models and data”, Reliability
Engineering and System Safety, 44(1), 27-55.
Kazuo Hatakeyama
Enterprise Consulting Office/ Salvador, Bahia, Brazil
E-mail khatakeyama875@gmail.com
Abstract
The Regulatory Standard NR-17 sets out parameters that allow the adjustment of the working conditions to the
psychophysiological, safety and efficient performance. So that, the employer to meet the requirements of the
Regulatory Standard necessary to deploy a production system that is based on the anthropometric study of the
workers. The Machine-Man-Task System (MMTS) approach allows the voice of the worker to be included in the
design of the production system. The aim of this work is, by using the MMTS approach, assess the tasks of postal
workers in their jobs and propose suggestions to eliminate or minimize the risks of accidents, injuries and illnesses.
The diagnosis made showed that levels of illuminance, effective temperature, relative humidity, ventilation and
fire extinguishers coverage met the requirements of the regulatory standards. The noise level and workers’ comfort
according to their anthropometric measurements of both the table of Operational Performance Management System
(OPMS) and the compact monitor on Label Maker Table (LMT) did not answer the requirements of the standard.
The design of a new table of OPMS carried out and tested as well as the design and adjustment of the positioning of
the LMT compact monitor. A new layout model was run to reduce ambulation and validated by the workers as well
as labor gymnastics introduced. The results obtained contribute to show the applicability of the MMTS approach in
addition to NR 17.
Keywords: Machine-Man-Task System, Postal Workers, Anthropometric Measures, Voice of Workers,
Ergonomic Validation
1. Introduction
The Regulatory Standard NR-17-Ergonomics set by Ordinance 3214/78 of the Ministry of
Labor and Employment sets out parameters that allow the adjustment of the working conditions
to the psychophysiological, safety and efficient performance. So that, the employer to meet the
requirements of the Regulatory Standard necessary to deploy a production system that is based on
the anthropometric study of the workers. The Machine-Man-Task System (MMTS) approach allows
the voice of the worker to be included in the design of the production system, also includes the steps
of implementation and validation. This approach has been in use approximately for three decades;
however, there are very few documented studies on this issue.
1.1. Purpose
The aim of this work is, by using the MMTS approach, assess the tasks of postal workers in their
jobs and propose suggestions to eliminate or minimize the risks of accidents, injuries and illnesses
of these professionals.
2. Methodology
The methodology utilized the systemic approach of the MMTS based on the theoretical reference
of the studies carried out by Anamaria de Moraes and Claudia Mont’Alvao that defend the stages
and the phases of the ergonomics intervention: appreciation, diagnosis, design, validation and tests.
3. Literature Review
Source: Authors
3.4. Prediction
After the analysis done in the target system and localized the queries on ergonomic problems, the
technique SUT prioritized and classified. The predictions, that portrays the cause of the problems
described herein:
Unsystematic observations pointed out the existence of six types of interfacial problems that can
generate discomfort and pains at the end of the working day:
1. The first, related with the flexion and the rotation of the column to reach the package in
the bottom of the container, the elevation and disposition at the height of the labeling
table, LOEC. Believe that such facts occur due the lack of the supporting stand in
the anthropometric height to perform the task. Suggest the application of the NIOSH
(National Institute for Occupational Safety and Health, of the USA) method of lifting
and vertical displacement of loads for maximum load flooring to lift the job, in the
sagittal plane.
Kroemer and Grandjean (2005) stated that in the too low places of work, backs overloaded by
the excess of bending of the trunk could lead to the appearance of back pains. To avoid such
embarrassment is indispensable that the height of the work surface be in accordance with the
anthropometric measures of operators, both for the tasks performed standing, as seated.
The criteria to establish the limits of load are of biomechanics, physiologic and psychophysical
character. Regarding biomechanics character, handling a heavy load or do it incorrectly, appears
some mechanical momentums in the vertebral column–concretely in the region of the segments-L5/
S1–that cause considerable stress in the lumbar region (Masculo, 2011).
When the job involves handling and transportation of load, force requirement, inclination and
rotation of the trunk, for example, as large as the inclination of the body forward and more weight
sustained by the hands, more will be the intra-disc pressure as the effort is transferred to the vertebral
column. Imperious the adoption of comfortable posture with forces directed towards the vertical
axis, in the cases of lifting and transportation of load (Jouvencel, 1994; Iida, 2005).
2. The second problem interfacial points the flexion-extension, of the cervical spine and
head in the reading of information in the monitor and digit of the data to printing the
label. Suggest the search in the market of computer shop the furniture that contemplates
and generate physical comfort.
3. The third interfacial problem refers the squat to label the package that is near to the floor
of the light collapsible container (LCC). Check the possibility to search in the market
adjustable lifting apparatus. Suggest the training and lecture of awareness of risks of
postural accidents.
4. The fourth interfacial problem points out the flexion of the column to utilize computer
terminal. The desk of the operational performance management system, OPMS, utilized
for the job with the computer to register the exit of the orders to the clients, is short
and make the flexion of the trunk to perform the task. To expedite the exit of orders to
attend the delivery on time, they do not sit. Check the possibility of execution the table
to attend the percentile of 95% of the shortest woman and 95% of tallest man could be
the ideal solution.
Observation: One adjustable table is not the solution, as the requirement of schedule of the delivery
of the orders does not allow the table with individual adjustment.
5. The fifth interfacial problem refers to elevate the arms above the shoulders to reach the
bar to push the chart with the package of orders. Besides, the elevation of arms above the
shoulders apply the muscle strength to push the cart full of orders.
It is believed that labor gymnastics with the guidance of heating, stretching and strength of the
muscles utilized prevents lesions. Suggest checking the possibility to weld the bar similar in height
of action zone ergonomically analyzed.
6. The sixth interfacial problem refers the elevate the arms above of the shoulders to reach
the upper row of the recess, 1.60 m to 1.70 m from the floor level. In observation, the
time of permanence in the position in this task is up until 10 minutes by the morning and
the afternoon, once of a recess of letters and SEDEX. Believe that the labor gymnastics
could strengthen the musculature and prevents possible lesions.
The internal ambulation of the postman since the labeling tables carrying the orders to the district
tables, to the recess, to table of the SEDEX, SEDEX 10, as well as, internal circulation seeking out
the pouches in the wired basket, organizing and transporting the carts to the exit and delivery of
orders it’s about a big ambulation. Check the possibility of new layout making to stay more close
to the tables of the districts and the displacements with loads become smaller. Present disposition
favors some districts whereas others displace longer distances.
In a vision of Grandjean (1998), in the dynamic work the muscles alternatively they contract and
relax by pumping new flow of blood that invigorates the muscles, helping in the alternation of the
pressure and the relaxation. Thus, the dynamic work can maintain by more time than the static work.
IAMOT 2019 | 557
Managing Technology for Inclusive and Sustainable Growth
To Iida (2005), the occupational biomechanics analyses the body postures and the application
of forces in the achievement of works. Inappropriate places of work generate muscle tensions or
fatigue. Simple measures of orientation to work and/ or alterations in the place of work to solve or
soften the problems. In some cases requires accurate solutions.
The frame of the ergonomic opinion shows the summary of the problems found in the CEE Santo
Cristo, well as, its class, the requirements, embarrassments, human costs due to dysfunctions of the
system, preliminary suggestions for improvements and restrictions of the system.
Considering the problems and evaluation through the table SUT, have some suggestions for
improvements, upon the results of the survey.
4. Field Survey
The fieldwork carried out in the Orders Addressing Center Santo Cristo of the Brazilian Post Company
in Rio de Janeiro, Brazil. The approach used has four phases: ergonomic diagnosis, ergonomic
assessment, ergonomic design and ergonomic validation. The study conducted between August
2013 and December 2014, by a multidisciplinary team composed of the occupational physician, the
occupational safety engineer, the designer and the teacher of physical education, has involved the
participation of 40 postal workers. The diagnosis made showed that levels of illuminance, effective
temperature, relative humidity, ventilation and fire extinguishers coverage met the requirements of
the regulatory standards.
Next stage was to understand the flow of activities in the specific sector of the express mail (SEDEX).
This sector structured to flow the tasks as shown in Figure 2.
Source: Authors
All the following tasks as sort out the packages by district, separation of pouches by district, organize
the pouches by order of delivery, prepare the vehicle for delivery, delivery the packages to customers
and collect the empty pouches, follow similar flow procedures as shown in Figure 2.
5. Findings
The noise level and workers’ comfort according to their anthropometric measurements of both the
table of OPMS and the compact monitor on LMT did not answer the requirements of the standard.
In addition, it was found that ambulation of workers was excessive. The design of a new OPMS table
carried out and tested as well as the design and adjustment of the positioning of the LMT compact
monitor. A new layout model was run to reduce ambulation and validated by the workers as well as
labor gymnastics.
to weights up to the limit. In these working conditions, that perform this type of task do
not have problems.
The equation was recalculated eliminating the angle of symmetry of lifting obtained WLR = 18.01 kg
and for the weight more than 18.01 kg to 30.0 kg the LI will have values more than 1 to 1.66 exposing
the risk of low back pain and lesion of the ligament muscle system. As the wired container of the
pouches is a set of four containers joined together and the time of execution of the task is 15 to 20
min. by the morning and by the afternoon, suggest the work in the double for more heavy packages.
The problems pointed out are the medium to ease solution, such as to fix the defective floor, organize
the use of elevators in the rush hours of the postmen, implant the labor gymnastics that had practiced
in the past, being requested the comeback for its validation. Management of distribution and control
of coils of labels to the responsibility of supervisors, keeping centralized the purchasing process to
obtain a good deal, are solutions that can adopt immediately or within 3 to 6 months.
Solutions of problems that involve the general administration of the enterprise and other entities, as
Federal Police for burglars and robberies of goods, department of transit and prefecture to reorganize
exclusive corridors for bus transportation, ambulances, already existing in the city. Also needs to
include the post office transports and the delimitation of special vacancies to park the post office cars
during the day, require awareness, determination and the involvement of management, political will,
the responsible internal team involved to obtain solutions.
Regarding internal ambulation of users, suggest the new layout with central positioning of LMT,
validation approved by the clerks, but the solution of at high cost.
7. Conclusion
Consider the practical character the result of the validation, once the OPMS table designed, proposed
and built by the team waived successfully. Obtained the approval and validation by the operating
clerks participating in the research. The proposal to set the monitor ergonomically correct to work
standing in the LMT, designing adjustable stand, locating in the front to attend 97.5% of the users,
approved by the availability of the apparatus in the local market.
The adjustable stand placed in the test for the validation with the effective participation of clerks about
the position and the fixing in the corresponding height to the field of vision and action intersection
as designed. For the test, used the existing monitor of daily use, this becomes the project accessible
to implement, once the federal administration of the country is in the stage of scarce investments.
Meanwhile, the purchase of screen touch suggested could be inviable such relevant study.
Regarding interfacial problems involving the lifting loads and specific application of the method
NIOSH, studies performed in the diagnosis and solutions. For clerks provider of orders for the
LMT, the weight limit recommended, WLR = 9.55 kg and lifting the index, LI = 1.05. These values
indicate that the minimum the risk of lesion in the column ligament muscle system for the weights
up to the limits. In such conditions of work, clerks working with these tasks will not have problems.
The problems pointed out are the medium and easy solution as to mend the defective floor, organize
the use of elevators in the pick hours for clerks to work with more freedom, to implant the labor
gymnastics that had practiced once and requested the comeback and validated.
The management of distribution and control of the coils of labels pass to the responsibility of the
supervisors, keeping centralized the purchase to get better discounts, are solutions that can adopt
immediately or in the time span of 3 to 6 months.
Solutions of problems that involve the general administration of the enterprise also other bodies
such as Federal Police regarding assaults and burglars of loads. The department of transit and the
prefecture to reorganize exclusive corridors for buses, ambulances already existing in the city, also
including the mail transports and the limitation of special vacancies to park the mail vehicles during
the day. Requires concern, the determination to involve the top administration, political will and
responsible internal team to get solutions.
Regarding internal ambulation new layout with the central location of the compact monitor of LMT,
validated and approved by clerks, but the solution at expenses of a high cost.
8. Acknowledgments
Thanks to the Brazilian Enterprise of Post Office and Telegraphs for opening the door to contribute
to complete the present research work.
References
ABNT (Brazilian Association Of Technical Norms). (1985). Norm 5382/1985: Verification of lighting of interiors. Rio
de Janeiro. (in Portuguese)
_____. (1992). Norm 5413/1992: Lighting of indoors. Rio de Janeiro. (in Portuguese)
_____. (1991) Norm 5461/1991: Lighting (terminology). Rio de Janeiro. (in Portuguese)
_____. NBR 10152. Levels of noise for acoustic comfort. Retrieved from
<http://www.trabalhosfeitos.com/ensaios/Abnt-Nbr-10152-N%C3%ADveis/32749267.html>. Access on Oct. 10, Nov.
17, Dec. 11, 2014. (in Portuguese)
_____. (2013) NBR ISO/CIE 8995-1: Lighting of workplaces–part 1: Interior. Retrieved from <http://www.abntcatalogo.
com.br/norma.aspx?ID=196479>. Access on Nov. 17, 2014; in Dec. 11, 2014. (in Portuguese)
Brasil. (2002) Handbook of application Regulatory Norm nº. 17. Brasilia: Ministry of the Work and Employment,
Secretary of Inspection of the Job. 2nd edition. (in Portuguese)
Corlett, N., Wilson, J. and Manecca, I. (1986). The ergonomics of working postures. London: Taylor & Francis.
Corllet, E.N. and Manecca, I. (2014). The effects and measurement of working postures. Applied Ergonomics, v.11, n.
1, pp.6-12.
Couto, H.A. (2007) Ergonomics applied to work: the basic content and practical guide. Belo Horizonte: ERGO Editora.
(in Portuguese)
Couto, H.A. (1995) Ergonomics applied to work: Technical handbook of the human machine. v.1 and v.2. Belo
Horizonte: ERGO Editora. (in Portuguese)
Cybis, W. (2010). Ergonomics and Usability. Knowledge, Methods and Applications. 2nd.ed. Sao Paulo: Novatec
Editora. (in Portuguese)
Dul, J. and Weerdmeester, B. (2004).Practical Ergonomics. 2nd. ed. Sao Paulo: Edgard Blücher. (in Portuguese)
The Brazilian Enterprise of Post Office and Telegraph (EBCT). Enterprise Report 2008. Retrieved from <http://www.
correios.com.br/sobreCorreios/empresa/publicacoes/relatoriosEmpresariais/default.cf m>. Access on Nov.
26, 2013. (in Portuguese)
Giga S.I., Hoel H. and Cooper C.L. (2003). Violence and stress at work in the postal sector. Geneva: International Labor
Organization.
Gomes Fo, J. (2003) Ergonomics of the object: the technical system of ergonomics reading. Sao Paulo: Escrituras
Editora. (in Portuguese)
Gomes, V.B. (1999). Back pain in workers in the municipality of Rio de Janeiro: the prevalence, factors associated and
occupational risks. Rio de Janeiro. Doctoral Thesis – Institute of Social Medicine, The University of the State
of the Rio de Janeiro –UERJ. (in Portuguese)
Granjean, E. (1998). Handbook of ergonomics: the adaptation of work to man. Porto Alegre: Artes Medicas.
(in Portuguese)
Iida, I. (2005). Ergonomics, Design and Production. Sao Paulo: Edgar Blücher. (in Portuguese)
INMETRO. (2003). Base unity of the international system for lighting. Retrieved from <http//:www.inmetro.org>.
Access on Apr. 21, 2014. (in Portuguese)
Jorge, M. do. C.T. (2003). The Posture of work in stand up: the study with shop workers. Florianopolis. Master’s
Dissertation. UFSC. Retrieved from <http://www.tede.ufsc.br/Teses/PEPS3751.PDF>. Access on Apr. 12,
2014. (in Portuguese)
Lidwell, W., Holden, K. and Butler, Jl. (2010). Universal principles of the design. Porto Alegre: Bookman.
McKenzie, R. (1998). Treat yourself your column. New Zealand: Spinal Publications Ltda.
Medeiros, I.M. (2001). The study, the learning d the dissemination of ergonomics concepts as the means of creation of
the ergonomics culture within the ECT, aiming to reduce the absenteeism and the incidence of occupational
diseases. Master’s Dissertation. Porto Alegre: UFRS. (in Portuguese)
Mingrone A.C. (1985). Lighting: importance and methodology of application in the architecture. Master’s Dissertation.
Faculty of Architecture and Urbanism, USP, Sao Paulo. (in Portuguese)
Mont’alvao, C. and Damazio, V. (orgs.). (2008). Design, ergonomics and emotion. Rio de Janeiro: Manual X: FAPERJ.
(in Portuguese)
Moraes, A.M. de and Mont’alvao, C. (2009). Ergonomics Concepts and Applications. Rio de Janeiro: 2AB, (4th edition,
expanded). (in Portuguese)
Morais, R. (2010). Foundations of the design of a product. Porto Alegre: Bookman. (in Portuguese)
Quaresma, M.M.R. (2001). Application of Anthropometric data in design projects: how to design correctly ergonomics
products. Master’s Dissertation–Design, Pontifical Catholic University of the Rio de Janeiro–PUC-Rio.
(in Portuguese)
Quaresma, M.M.R. (2010). Evaluation of usability of information systems available in automobiles: ergonomics
study in navigation systems GPS. Doctoral Thesis – Design, Pontifical Catholic University of the Rio de
Janeiro–PUC-Rio. (in Portuguese)
Serrano, R.C. (1996). New equipment of anthropometric measurement. Sao Paulo: Editora Rev, FUNDACENTRO.
(in Portuguese)
WinOWAS. (1996). A computerized system for the analysis of work postures. The Tampere University of Technology.
Occupational Safety Engineering. Retrieved from <http://turva.ma.tut.fi/owas/index.html>.
Abstract
Industrial Furnaces are used for Melting, Reheating, Galvanizing, Heat Treatment and many other applications in
Industry for ferrous & non-ferrous metals and their alloys on a large scale. The design use to change with invent
of digital technology, Computer integration with machinery and software development. From literature survey as
well as actual survey and practical observation of furnaces in operation, it has been found that there is scope for
developments over thumb rules applied by academics for designing and energy conservation in manufacturing of
industrial furnaces by the industry.
This study & research work focuses mainly for Reverberatory aluminium melting furnace used for manufacture of
wire rods. These wire rods are reduced to wires in conductor plant that are used for overhead power transmission
on a large scale all over the world. Hence study & development is required in the subject as a part of continuous
development. The focus is on to design as per customer requirement. A reverberatory furnace is a metallurgical or
process furnace that isolates the material being processed from contact with the fuel, but not from contact with the
combustion gases. The term reverberation is used here in a generic sense of rebounding or reflecting. The burners
are fired from side wall with location towards the top roof side. An angle is given to the flame so that flame travels
the front side wall & reflected downwards towards the charge. The mode of heat transfer is radiations through the
walls as well as Convection transfer.
Energy conservation is an important task while operating reverberatory furnace. The efficiency of the furnace is
considered 30% for design calculations globally for metal & its alloys treatment. This indicates that almost 70% of
the heat is going to waste. Hence the study is mainly focused on recovering these heat losses to improve efficiency
and cost reduction. By introducing equipment like steam turbine to generate electricity in the exhaust flue path
& Damper / motorized control in the chimney, Developed material for refractory lining, Automated combustion
system to achieve perfect ( 100% ) combustion of fuel. A solar cell is the new concept to recover heat losses and
study is going on to recover heat losses. Following check list is recommended to save heat losses.
1. Better heat transfer by radiation exposure and convection circulation.
2. Closure to stoichiometric air/fuel ratio control.
3. Better furnace pressure control to minimise leaks and non-uniformities.
4. Preheating furnace loads by using waste heat.
5. Preheating air or fuel or both if fuel has low heat value.
6. Waste heat boilers
7. Better location of zone temperature control sensors.
8. Rezoning furnaces into more small zones like independent burner control system.
9. Oxy-fuel firing.
10. Regenerative Burners
11. Automation - Safety to the personnel & quality of the product are the key factors demanding automation,
development in the existing system of any product manufacturing.
1. Introduction
Heat Treatment is the controlled heating and cooling process of a Material to achieve desired
shape & certain mechanical properties, such as hardness, strength, flexibility & the reduction
of residual stresses. Industry deals with the Heat Treatment of Metals & eventually shaping
them into finished goods with improved properties. Many heat-treating processes require the
precise control of temperature over the heating cycle. Heat-treating is extensively used in metal
production & other industry like glass, ceramics. Typically the energy used for process heating
accounts for 2% to 15% of the total production cost. Thermal efficiencies can range from 90%
for condensing boilers to under 10% for small, batch operated high temperature furnace like
heat treatment furnaces.
Many of existing Industrial furnaces are operated through manual operations, which incur huge
energy loss as well as cost. Hence to improve upon the same, it is necessary to have automation to
save the energy & running cost.
In order to save energy efficiency & optimize the loading capacity, it’s need for numerical modelling
capability to accurately simulate the heat treatment process. There are many solutions for modelling
the heat transfer & material properties for a single work piece but none of them have a furnace model
for simulating the thermal profile of the entire load. A comprehensive furnace model is crucial to
accurately simulate the temperature of the load. To obtain temperature uniformity inside the furnace
is a major task, which also necessitates the research work to be carried out. The flame should be
in free space inside the combustion chamber & hence optimum design of combustion chamber is
required. Refractory material development is an area for research.
The study & research work will be divided into two parts.
i. Study of Literature, Journal papers, Text book, Magazines & others publications through
seminars.
ii. Practical observations of furnaces on site while in operation & taking a timely feedback
from the person who is actually operating the furnace.
2. Literature Review
Widely accepted & trusted brand in India as well as globally. Findings - Literature / Bulletins of these
organizations provide details of their product. These are helpful for selection of their equipment,
installation & maintenance. This also provides dimensions of the product to understand the size
constraint before installation. No of series of products are given in one bulletin & designer can select
with regard to their requirement.
c. IS 15562 :2005 – IS guidelines
●● Title: Guidelines for Design & construction of fuel fired bogie hearth furnace.
●● Findings: To promote transparency & accountability, Parliament of India set out
right to information in an accurate manner to the public. The publication of bureau of
Indian Standard is of particular interest to those engaged in the pursuit of education &
knowledge in which safety standard is made available.
●● NABL Guidelines to compile their requirement for calibration
●● Author: National Accreditation Board for Testing & Calibration laboratories
●● Findings: An autonomous body under the aegis of Department of science &
Technology, Government of India. This accreditation assist the Indian Industry to
enhance the quality & reliability of Indian goods & Exports, thereby catalyses the
growth of Indian economy. WTO has identified accreditation as the first essential step
towards removing technical barriers. They have set standardization of Tolerances for
calibration of temperature inside the furnace for necessary validation, which ensures
0% rejection of the job.
d. Wesman Group Handbook / Literature
This company is more than 60 years Old & now the most trusted brand in India as well
as globally. Hence the technology provided by them is proven. Their books & literature
helps designer to design the furnace, Service providers to find solution when the furnace
is in operation & upgrading the performance of the Furnace by combustion experts. The
bulletins provided by them helps the designer to select the right equipment from the
series for particular application. All handbooks / bulletin are studied to understand the
combustion systems.
2.4. Thesis
a. Submitted to Worcester Polytechnic institute.
●● Title: Furnace Modelling
●● Author: Radhakrishnan P.
●● Findings: The objective of this work is to develop a furnace model to accurately simulate
the thermal profile of load. No. of visits are done in different manufacturing locations to
identify the specific problem in the current model.
Continuous -Reheating Twenty First Century Wire Rods Ltd. Silvassa– DNH, UT 02
Total Visits 30
Continuous -Reheating Twenty First Century Wire Rods Ltd. Manual Auto
DESIGN Industrial furnace is an Insulated enclosure for heat transfer designed & manufactured for
increase in temperature of the charged material for industrial applications such as Melting of ferrous
& non-ferrous metals. Furnace consists of a fabricated MS steel structure with suitable angles,
channels at its outside with MS steel sheet as outer shell casing called cold face of the furnace. At
innermost layer of furnace refractory bricks called hot face with high alumina content are used to
form a structure.
4.2. Thermal
A general heat [energy] balance equation for a furnace may be stated as follows;
Heat Input to system = Heat utilized + Heat losses from the system.
4.3. Mechanical
For designing the furnace outer casing, roof & other load bearing areas, metal well, slag tap
knowledge of mechanical & structural engineering are essential.
ii. Blower Capacity - Flow = Burner Capacity ( LPH ) x 400 x 1.699 / 60 = 100 x 400
x 1.699 / 60 = 1132 x 1.2 ( FOS ) = 1359, ii Pressure = 44” of WG. ( Atomisation
+ pipe loss )
Hence Blower selected of 15HP from std. company Literature for above pressure & Volume
requirement.
iii. KW rating of Pumping Unit = LPH x Specific heat of Fuel x Raise in Temp. x FOS
KW = 100 x 0.0018 x 142 x 1.5/4.54 = 8.44 KW
iv. Air Pipe Line ( Main Header ) Control Valve – for std. Chart available, for blower
volume of 1359 cubic meter per hour, the main header pipe line of 8” selected.
Branch pipe lines are as per burner std. Port size.
v. Auto Temperature control system with the help of Air-Oil ratio regulator of ¾” size
in the Oil line & Modulating Motor of Honeywell make with air control valve of
Burner Port size is provided optionally.
vi. Automatic firing with the help of Pilot & UV flame detector is Provided as
optionally.
d.0.1. c Chimney
In this chimney diameter & Height of the chimney to be designed.
D = Л x √ LPH = 3.14 x √ 50 = 23.28” = 560 MM ( Thumb rule )
b. Height of chimney – Minimum Height of chimney is to be maintained as 15M or 03M more than
height of the tallest building within 100M circumference.
Figure shows a composite wall consisting of two different material through which heat is being
transferred by conduction. Let X1, X2 = Thickness of first and second material. K1, K2 = Thermal
conductivity of first & second material. T1, T2, T3 = Temperature at hot, junction point and cold
face of the furnace. A = Surface area of the wall. Then under steady conditions, rate of heat flow is Q
= T1 – T3 / ( Ʃ X /KA ) Cold face is normally maintained at 45˚C. Hot face is temperature required
inside the furnace. By using this equation and selecting suitable thermal conductivity material, Wall
thickness can be designed for minimising heat losses.
b. Preheating Air
By using recuperative burner or installing recuperator in the exhaust flue path, combustion air is
preheated & in turn fuel saving.
Table 3: Fuel Saving by Preheated Combustion Air Vs. Flue Gas Temperature
6. Conclusion
Complete combustion and Heat losses in Industrial furnace is an important area for research and
development. 1 kg. of carbon requires 8/3 kgs. of oxygen for complete combustion & produces 11/3
kgs. of carbon dioxide gas must for energy saving. Viscosity, Atomisation of fuel, Air/fuel ratio,
Insulation for furnace wall, Design of combustion chamber / Wall / chimney of furnace are important
factors for energy conservation, best quality product, fuel saving & in turn major cost reduction for
any industrial furnace. Efficiency of any industrial furnace is considered to be about 30% globally
for design calculations which implies that almost 70% efficiency is not being used. Hence research
focus is required on enhancing the furnace efficiency in industrial furnaces in particular. Best quality
product requires uniform heating of the charge. While making survey & practical observation of
Furnaces, The practical and proven examples of fuel saving & best quality product are listed below
as per feedback received.
1. Sterlite Power transmission Ltd., Silvassa (DNH,UT) - By preheating the cold loads
via installing a Tower furnace for aluminium melting, fuel saving about 10% achieved.
2. Apar Industries Ltd. silvassa (DNH,UT) – By Installing regenerative burner system to
preheat combustion air fuel saving about 15% is achieved.
3. ICEM Engineering Pvt. Ltd., Wada ( Maharashtra ) – Incorporating an automation
system over manual system fuel saving about 25% is practically achieved with the help
of team work. Uniform heating is calibrated by NABL. ( National Accreditation Board
for Testing Laboratories ). Necessary changes adopted and uniform heating of the job
achieved by repeated experiment during trial of the furnace and almost 0% job rejection
is achieved.
7. Acknowledgements
We wish to express our sincere thanks to all those Authors of the reference books, journal papers,
thesis, Industrial magazines, bulletins and newsletter used for study and preparation of this research
article. Also special thanks to all industry people who have shared their experience and information
during our visit to their plant for study.
Study of different books, journal papers, literatures has helped us to understand basics of furnace &
combustion system in industries theoretically while actual visit & practical observation helped us in
practical way making combination of theory as well as practical approach.
Finally last but not the least, Thanks to all our family members who considered us with their patience
while preparing this Research article.
Errors will be thankfully acknowledged and rectified.
Looking forward for suggestions and feedback as a part of continuous development.
Best Regards.
IAMOT 2019 | 573
Managing Technology for Inclusive and Sustainable Growth
References
Book
Industrial Furnaces by W. Trinks, M. H. Mawhinney. Vol. II, 6th edition, Wiley & Sons Inc., USA.
Manufacturing Processes by Serope kalpakjian, Steven Schmid. Fifth Edition.
North American Combustion Handbook by Brown, Reed. North American Manufacturing Co., USA.
Principle of Metal Casting by Richard Heine, Carl Loper
Research Methodology by C. R. Kothari, Gaurav Garg. New Age International Publishers., India
Journal Article
Data furnace, heating up with cloud computing by Jie Liu, Christan Belady. University of Virginia, VA22904
Design of 50 Kg. CI crucible furnace by using local materials by Asibeluo, Ogwar. International Journal of Research in
Engineering & Technology, ISSN 2319-1163.
Estimation of billet temperature during reheating furnace operation by Yu Jin Jang, Sang Woo Kim, Korea.
Increasing efficiency of cupola furnace of a small size foundry, IOSR Journal of Engineering, Vol 2, sep.2014.
International Journal of control, automation & systems, Vol. 5, no. 1, pp 43-50. Feb. 2007.
Performance analysis of Recuperator, IOSR Journal of Mechanical & Civil Engineering, Vol 2, Dec.2014.Boey, K.M.,
(1998), Social network and the subjective well-being of the elderly in Hong Kong.
Literature & Bulletin
Agnee Engineering
Combustion Tool Kit, Industrial Heating, The international journal of thermal technology, Feb. 2008.
Honeywell Group
IS 15562 ( 2205 ) – Guidelines for design & construction of fuel fired bogie hearth furnace.
NABL guidelines for calibration.
Wesman Group.
Thesis
Furnace Modelling by Radhakrishnan P., submitted to Worcester Polytechnic Institute for his partial fulfilment of
Doctor of Philosophy in June 2008.
Ziyaur Rahman
ACEM, DRDO, India
E-mail: ziyaur.amu@gmail.com
Ashutosh Sharma
ACEM, DRDO, India
E-mail: ashu1711@gmail.com
S. Das
ACEM, DRDO, India
E-mail: sushanta76@gmail.com
Abstract
Aluminium is virtually the universal secondary fuel for composite propellants. It constitutes upto 20% aluminium
by weight. Composite propellant consists of a small spherical aluminium particles of size of approximately 15
microns. This powder aluminium is first sieved to check for foreign inclusion before mixing in composite propellant.
Powder aluminium undergoes explosive reactions in the presence of numerous chemical substances thereby making
it hazardous operation. It also sensitive explosive mixture with oxidants. Aluminium dust is moderately flammable,
explosive by heat, flame, or chemical reactions with powerful oxidiser. Threshold limit (TLV) of aluminium is
10 mg/m3. Inhaling finely divided particles may cause pulmonary fibrosis. Long term exposure to dusts may cause
dyspnea cough and weakness. Skin and eyes contact with powder fibres can result in scratches and minor irritations.
Sieving of aluminium is a process requirement to sieve out the foreign material. This paper discusses about remotely
operated technology which successfully sieves aluminium powder in a dust free environment. This system is creditable
in safety point of view, low manpower demand along with efficient monitoring and controlling of all process in a single
window. This paper deals with equipment design and selection of various sub-assemblies for process optimization,
safety with minimum human interference and improved productivity
Keywords: Aluminium Powder, Design, Safety, Hazard Operation
1. Introduction
Composite Solid Propellant has become the main stay of Strategic as well as tactical missiles in
general. Composite propellant consists of a polymeric binder in which solid particles of oxidiser
and fuel along with other additives are added and mixed. A curator is added at the end to carry
out polymerization reaction and solidify the slurry to achieve required mechanical properties.
Aluminium powder, which consists of about 20 % by weight of composite propellant, is used as a
fuel almost universally owing to its convenient properties [2]. It increases the specific impulse and
Energy content of Composite Propellant. Aluminium powder of 6 microns to 20 microns are used
in composite propellant. Aluminium powder which is sourced from third party vendor is obtained
in bags of 50 kg. Before addition in composite propellant, the aluminium bags are opened and
sievedmanually for removal of any foreign particles and impurities. This is a tedious and time
consuming as well labour intensive process. Also during sieving huge amount of dust is generated.
Inhaling and exposure to dust is detrimental to one’s health as it results in several health problems
such as pulmonary fibrosis, dyspnea, cough, weakness, skin and eye problem. Further, the dust in
the environment is makes a sensitive explosive mixture which is dangerous with regard to safety
of operators. Hence there is a need to design and develop equipment which eliminates this manual
process of sieving
2. Requirement
The traditional method of sieving generates huge amount of dust. Threshold Limit (TLV) for dust
is 10mg/m3.
Considering this, there is a need to design and develop a special purpose Aluminium Powder sieving
unit to eliminate manual sieving operation and which incorporates automated dust free sieving and
weighment of aluminium powder.
The method adopted to design the Aluminium Powder sieving unit is strategic planning which shows
how a plant designs can evolve systematically taking account the processing objective, external
constraints and processing interactions.
The unit shall comprise of the following
a. Bag dump station with dust extraction and collection unit
b. Feeding system
c. Sieving system
d. Weighing System
e. Aluminum Powder collection system Collection
The unit is designed to serve the two basic purposes.
1. Manual unloading of metal powder from 50 kg gunny bags to a bag dumping station
2. Accurate weighment and batching of the powder into a bin for subsequent processing.
3.2. Design
The equipment is designed as per standard engineering practice. As the process comes under Hazard
Division 1.3 (HD 1.3) category, utmost care is taken of safety aspect. All control valves and motors
are remotely operated through PLC and SCADA. All electric components to be used be FLP type
(Flame Proof).
short distance (usually upto 40 m horizontally and 30 m vertically). The advantage of screw conveyor
lies in the simple design, easy maintenance, and easily enclosed to be dust or gas tight. It consists
of a screw arranged on a shaft supported on bearing, a trough with a cylindrical bottom arranged
coaxially with the screw and a drive (electric motors and reducer gear) to rotate the shaft with
screw. The material to be conveyed is fed into the trough and as the screw rotates, the material gets
propelled along the shaft in the same way as a nut would move on a threaded rod if it is prevented
from rotating together with rod. Rotation of material together with the screw is prevented by its own
weight as well as the friction on the trough wall [3].
Calculations for Screw Conveyor.
3.2.2. Assumptions
i. Ds=0.25,
ii. Capacity C=500Kg/hr = 8.33 Kg/min
iii. No of Peaks=10
iv. HBF=Hanger Bearing Factor=0.9
v. DF=Diameter Factor=106 (From Literature)
vi. E=Drive Efficiency=0.88… (From Literature)
vii. W=Bulk Density
viii. MF=Material Factor = 1.8 (From Bulk Density Materials Table)
ix. N=Conveyor Speed (RPM)
Formula for Capacity C=Π/4 [Ds2-Dp2]/*P*K*ƪ…Eqn (1)
i. Ds=Diameter of Screw [m].
ii. Dp=Diameter/ Pitch [m].
iii. P=Length of Pitch [m].
iv. K=Loading Factor
v. ρ=Density kg/m3.
vi. DF=Diameter Factor.
vii. CFH=Conveyor Capacity (Ft3/hr)
viii. Substituting in eqn 1
ix. Ds=0.078, Dp=0.0195 m
Formula for Pitch is=No of Peaks*Length of Pitch+Thickness
Pitch Length =L==10*7.8+25=103 cm=1.03 m.
Calculations for Total Horse Power Required for the Screw.
Total Horse Power = Friction Horse Power + Material Horse Power/…Eqn (2)
Where, Friction Horse Power= DF*HBF*L*N/106……Eqn(3)
Material Horse Power=CFM*W*MF*L/106. ……Eqn (4)
Calculations for Speed of Conveyor:
Capacity at 1 RPM at 30% loading=0.4 kg/min
4. Results
The equipment design and development has resulted in drastic reduction of dust generation in the
environment. The Short Term Exposure to Aluminium dust has been almost eliminated.
Also with introduction of Aluminium powder sieving unit the requirement of manpower has also
reduced. Traditional sieving required 6–8 Manpower (6 Operators and 1 Supervisor) depending upon
load and requirement. However, Aluminum powder unit requires only 2 Operator and 1 Supervisor
(for operation of PLC and SCADA)
8
6
4
Manpower
2
0
Before After
Figure 5: Reduction in Dust Exposure by Introduction of Aluminium Powder Sieving unit
5. Conclusion
Introduction of Aluminium Powder processing unit in processing of solid rocket propellant has not
only reduced the manpower requirement but also improved safety and health of personnel involved
as human involvement in sieving has been eliminated which reduces exposure to Aluminium dust
during sieving. The equipment utilizes sophisticated remotely operated technology through PLC
and SCADA for sieving and weighment of Aluminium powder which improves quality and human
error during weighing.
6. Acknowledgement
We would like to acknowledge kind guidance and support of Shri Srinivasan Seshadri Sc G, General
Manager ACEM, without whom this paper would not have been possible.
References
Narayanan C.M. and Bhattacharyya B.C. 3rd (eds)(2009), Mechanical Operations for Chemical Engineers, New Delhi,
Khanna Publishers
Sutton George P. and Biblarz Oscar 7th (eds) (2001), Rocket Propulsion Elements
Perry H. Robert, Green Don W., 8th (eds) (2001), Perry’s Chemical Engineers Handbook, New York McGraw Hills
Budynas Richard G., Nisbett J. Keith, 9th (eds), Shigley’s Mechanical Engineering Design, New York McGraw Hills
Design Data: Data book of Engineers by PSG college
Aluminium powder Safety Data Sheet, Revision nr: 4, issue date: 09.03.2015
Davenas Alain, Solid Rocket Propulsion Technology, New York, Pergamon Press
Huaqiong Liu
University of Pretoria, Department of Engineering and
Technology Management, South Africa
E-mail: Lhq5983442@163.com
Leon Pretorius
University of Pretoria, Department of Engineering and
Technology Management, South Africa
E-mail: leon.pretorius@up.ac.za
Dongdong Jiang
University of Pretoria, Department of Engineering and
Technology Management, South Africa
E-mail: dongdongjiang1212@163.com
Abstract
Since convenience stores are accessible everywhere around cities in China, it is common to see them as logistics
terminals in daily life, which play an important role in logistics industry. However, problems exist with the
logistics distribution of convenience stores in China: low efficiency, high cost, backward logistics infrastructure,
and low-level informatization. All these problems lead to low economic benefits for convenience stores as logistics
terminals. Through research and analysis on chain convenience stores, this paper aims to address ways to reduce
logistics cost of the convenience stores and to achieve logistics integration. It also provides based on the findings of
this paper some suggestions for the development of convenience stores in China.
Keywords: Logistics Integration, Chain Convenience Stores, Logistics
This paper focuses on the comprehensive systems thinking about the logistics integration and
countermeasure analysis of the construction of convenience stores and then proposes a scheme
of chain convenience stores and logistics system integration. This is then in essence exploratory
research based on the abovementioned concepts complemented by an appropriate literature review
as well as a case study. The logistics integration designs presented in the next sections of this paper
is also partly based on the concept known as Design Science Research (Scribante, Pretorius et al.,
2018) (Wieringa, 2010).
SF Heike is taken as a case study example in this research. SF Express is one of leading logistics
companies in China. As the leader in logistics industry, SF Express continues to carry out technological
innovation. In 2014, SF Express established ‘SF Heike’, in order to start a new business model of
“Express Delivery Station + Community Convenience Stores + Offline Experience Stores”, which
breaks the traditional pattern of convenience stores: these stores not only provide customers with
daily consumer goods, but also act as express delivery stations. When a customer is shopping at
these convenience stores, he can send and pick up by the way his express items in the convenience
stores, which provide an O2O experience platform (LY. Zeng, 2010). However, after being put
into operation for some time, some deficiencies of SF Heike have been exposed. For example,
although these are physical convenience stores, customers can experience the goods only by pictures
in the stores due to their special business mode but purchase the goods by placing an order online.
Influenced by the traditional consumption mode, customers are more willing to buy goods directly
in the stores. Though ‘SF Heike’ provides customers with home delivery services, this business
model violates the basic principle of convenience stores: convenience. Although SF Express hopes
to achieve multi-business-model cooperation through offline physical stores, the results are not
satisfactory. For the reason that SF Express can provide excellent delivery services, customers prefer
to choose convenient home delivery service rather than pick up goods by themselves in the physical
stores. Therefore, how to enrich the functions of its offline stores, attract more consumers, and make
consumers choose to go to a physical store have become problems to be solved.
The construction and design of convenience stores logistics integration system may promote the
optimization and integration of terminal distribution. By choosing suitable cooperative partners,
making reasonable logistics development plans, and integrating convenience stores with other types
of businesses, the distribution capacity may be made good use of, the logistics costs reduced, and
a more effective distribution network and an integrated logistics system take shape. Furthermore,
according to the countermeasure analysis of the construction of convenience stores logistics
integration system, a more reasonable cooperation mode is adopted to take advantage of logistics
integration, thereby improving the transportation efficiency of the last mile delivery, enriching
customer experience and improving customer satisfaction. Such an analysis is presented in the next
section as part of the integrated system design.
From the perspective of chain convenience stores, the products sold by them are mainly daily
necessities with strong timeliness, frequent replacement of goods; so large customer flow is what the
convenience stores hope for. By cooperating with the express delivery enterprises, the convenience
stores also act as express delivery stations. When customers send and pick up express items on the
way to and from work, they can browse the goods in the convenience stores by the way, so that their
consuming desire may be stimulated and sales volume may increase.
In addition, with the development of the supply chain, cold-chain logistics services need to be introduced
in community terminals. The chain convenience stores are capable of undertaking cold-chain logistics,
for the convenience stores are always equipped with refrigeration installations which can play the role of
transit and storage in the cold-chain logistics.
4. Conclusion
As one of the retail businesses, the chain convenience stores play an important role in economic
development. The development of the logistics industry and associated integrated technology is
undoubtedly closely related to the retail industry. In fact, the quality of logistics and distribution
services is directly related to the development of chain convenience stores. Improving the quality
of logistics as well as reducing costs has become one of the key points in the development of
chain convenience stores. So far, due to the restrictions in terms of economic system, information
technology, and infrastructure, the quality of logistics and distribution services has not been improved.
Through the cooperation between multiple enterprises, the optimization of distribution routes, and
the exercise of transport capacity, this research aims to improve logistics services and technology,
to reduce the logistics costs of chain convenience stores, to enrich the customer experience, and to
explore more profit sources from different aspects.
In the process of integrated planning, the chain convenience stores should flexibly choose the
logistics distribution mode according to the business model of the cooperative enterprise and their
own needs. After operating to a certain scale, they can consider establishing their own logistics
system and establishing specialized logistics departments to improve transportation efficiency. It is
also possible for them to purchase goods with higher value and timeliness and distribute them by their
own logistics system independently. But some goods with lower value or lower timeliness should be
outsourced to third-party logistics enterprises, which may reduce transportation costs and guarantee
the quality of the goods. Through cooperation with third-party logistics enterprises, the convenience
stores can learn from their professional management modes, find the drawbacks and shortcomings
of their own self-operated logistics, and then continuously improve their business models to reduce
logistics costs from the source, improve distribution efficiency, and reduce inventory and the amount
of capital occupied, thereby reducing the overall operating costs, increasing the competitiveness of
enterprises, and finally achieving logistics integration.
References
XY.Huang, YX.Zhang.(2009). “Research on Optimization Strategy of Logistics Management in China’s Chain
Convenience Stores.” Chinese and Foreign Entrepreneurs (6X), 124-124.
XH.Sun, FZ.Chen.(2006). “Thoughts on the convenience store logistics distribution system.”Food and Oil (6), 17-18.
BB.Zheng.(2017).”Comparative Analysis of Regional Competitiveness of China’s Convenience Stores.” Journal of
Putian University(6), 54-59.
N.Li.(2016). “Talking about the Problems and Countermeasures of Logistics Distribution of Chain Convenience Stores.”
Market Modernization(17), 31-34.
Abdul Hamid, A. B., M. S. Ab Talib and A. C. Thoo (2015). “Critical success factors of supply chain management:
A literature survey and Pareto analysis.” EuroMed Journal of Business 10(2), 234-263.
Enrique Alba, Bernabé Dorronsoro.(2006).”Computing nine new best-so-far solutions for Capacitated VRP with a
cellular Genetic Algorithm.” Information Processing Letters98(6), 225-230.
Pisinger, D., & Ropke, S. (2007). “A general heuristic for vehicle routing problems.” Computers & Operations
Research, 34(8), 2403-2435.
Salman, A., Ahmad, I., & Al-Madani, S. (2002). “Particle swarm optimization for task assignment
problem. “Microprocessors and Microsystems, 26(8), 363-371.
Scribante, N., L. Pretorius and S. J. Benade (2018). “Applying a Design Science Research methodology to the design
of a research instrument.” 14th INCOSE SA Conference 2018. Pretoria, South Africa, INCOSE SA, pp 14.
Wieringa, R. (2010). “Design science methodology: principles and practice.” Proceedings of the 32nd ACM/IEEE
International Conference on Software Engineering - Volume 2. Cape Town, South Africa, ACM, 493-494.
J.Li.(2011).”Research on the profit model of chain convenience stores.”Shandong University.
GZ.Li.(2005). “Research on Logistics Process Optimization and Implementation Method in Logistics Integration.”
Wuhan University of Technology.
CH.Zheng.(2010). “The implementation of SME logistics integration and its performance evaluation.” Shan Dong
University.
LY.Zeng.(2008). “Research on Logistics Integration Development Planning of Changsha, Zhuzhou and Xiangtan City
Group.” Changsha University of Science and Technology.
Pavitra Dhamija
University of Johannesburg, Faculty of Engineering and
The Built Environment, South Africa
E-mail: dhamijaresearch@gmail.com
Arnesh Telukdarie
University of Johannesburg, Faculty of Engineering and
The Built Environment, South Africa
E-mail: arnesht@uj.ac.za
Abstract
The term Industry 4.0 or the Fourth Industrial revolution originated in 2011 at the Hannover Fair, Germany. This
concept has received enormous attention and importance among practitioners, academics, and government officials
across the world. The attributable reason for the existence of this concept is technological advancements via
information and communication technologies, internet of things, and cyber physical systems. The purpose of this
study is to explore the association between Industry 4.0 architecture and outbound logistics operations in petroleum
companies. Petroleum logistics, as a resource, in South Africa is complex in nature requiring intense infrastructure.
The review of extant literature is conducted to understand the link between Industry 4.0 and business logistics
process optimization. The study concludes with key take away for managers and future research directions. This
study revolves around the concept of Industry 4.0 architecture and outbound logistics operations with reference
to petroleum companies. The method of systematic literature review has been adopted to analyse the existing
body of global research. The research also highlights the opportunities for future research. The key objective is
to assess the importance of industry 4.0 architecture and its impact on outbound logistics operations. The results
unveil the different aspects relate to the link between Industry 4.0 and business logistics process optimization.
This study proposes the definition of the entire business process, together with the industry 4.0 assumption of total
digitalisation. It has also served various implications for managers and industry at large. The findings confirm the
strategic involvement of Industry 4.0 in the petroleum industry of South Africa. All of this and the related aspects
have been discussed in the forthcoming sections of the paper.
Keywords: Outbound Logistics, Industry 4.0 Architecture, Petroleum Logistics, Optimization, Automation, Smart
Logistics
1. Introduction
Growing global competition has created possible opportunities for the logistics organization
to develop and enhance the scope for logistics. The enablement of personalised distribution and
warehousing has also delivered great benefits to the suppliers and manufacturers. The theme of the
current paper revolves around the aspect of outbound logistics in petroleum companies.
The most important sources of non-vegetable petroleum products are crude-oil wells in production
areas and natural gas fields and coal mines. Leonard (1982) shared three basic types of petroleum
pipeline transport systems (1) Gathering pipeline systems (2) Crude-oil trunk pipeline systems, and
(3) Refined-products pipeline systems. The different logistics management activities involved in
the flow of goods and information between place of origin and place of consumption (Ballou, 2004;
Bowersox et al., 2007) include demand forecasting, facility site selection, procurement, materials-
handling, packaging, warehouse management, inventory management, order processing, logistics
communications, transport, and reverse logistics.
The revenue generated from petroleum industry act as a major source of contribution towards
the interest of the economy as a large. Similarly, the situation in South Africa in not different. To
receive maximum income, it is highly important for the organization to provide customised logistics
operations to the end users at reasonable prices, which is in turn possible, only by adopting the
latest technology in terms of digitization. To understand the relation between the latest technology
(Industry 4.0) and outbound logistics operations with respect to petroleum companies, it is highly
essential to explore the current stage of this association, the present research that has been already
conducted in this specific area. It has been rightly said that the current research related to particular
area explains its penetration into the system. In a similar vein, the consulted literature confirms that
this area is unexplored and has a lot of scope for future researchers. This study has explored the
potential of the selected topic with the systematic literature review.
2. Review of Literature
The broad range of petroleum industry products and further its deliverables have actually raised
both challenges and opportunities for the petroleum organizations. Requirement of petroleum
organizations and its products are needed by each and every country placed in the category of
developed or under-developed or emerging (Moller, 2008). The outbound logistics challenges
faced by the petroleum companies to make the products available to the end user is creating a lot
of hurdle in the development of this industry. The supply chain management of each and every
organization has to be strong for the timely availability of the products to its end user (Grant et al.,
2006). Petroleum as a product cannot be used again or it cannot be recycled for the second time. Due
to this reason it becomes more necessary to save this source of energy. The paper has put some light
on the existing state of research and ensures that very less work has been carried out in this subject.
Hence, in the best of the economic development of the country, it is important to investigate the
existing extent of conducted research which can play an important role and contribute towards the
betterment of national interest.
3. Research Methodology
This section provides a series of steps to be followed for a systematic literature review and further
analysis. The need of this study has arisen because of the involvement of information systems in
logistics process adopted by the companies who want to create a niche segment for themselves.
The contribution of digitization (Industry 4.0) towards logistics has introduced a term logistics
4.0, which conveys the transformation of major manual logistics oriented activities into digitized
logistics format. It will serve as basis of future studies in this area (Kagermann, 2015). The major
reason for advantages to relate digitization with logistics is to meet out the goal of reliability in
operations. The other benefits but not limited to include better planning, transparency, better air
quality and sustainability, effective architectural designs, reduced risk, and personalised products for
customers (Hofmann and Rüsch, 2017). Moreover, it provides more flexibility to respond to demand
of the market and customers. The digitization of logistics also extends better management practices
by minimising complexities in the activities.
cover outbound logistics, outbound logistics operations, logistics optimization, petroleum logistics,
smart logistics, and petroleum logistics automation.
2018 4
2017 5
2016 1
5. Affiliation-Wise Publications
The affiliation statistics shared below explains the contribution by different universities (see Table 5
and Figure 6). The University of Zilina and Tallinn University of Technology topped the list.
Table 5: Descriptive Statistics: Affiliation-Wise: Industry 4.0 Architecture and Outbound Logistics
University of Zilina 2
Wismar University 1
Shenzhen University 1
University Auckland 1
University of Michigan-Dearborn 1
Table 6: Descriptive Statistics: Keyword-Wise: Industry 4.0 Architecture and Outbound Logistics
University Citations
Industry 4.0 6
Supply Chains 5
Sustainability 4
Adoption of Innovations 4
Air Quality 4
Analytical Methods 3
Antennas 3
Architectural Design 2
7. Conclusion
This paper ensures a lot of scope to explore Industry 4.0 architecture combined with outbound
logistics especially in petroleum organizations. No doubt, it is one of the burning areas in research,
but yet to be effectively captured by the researchers’ and academicians. The shared concept shall
be captured in phases by applying a step-wise process. This paper provides a systematic analysis,
followed by developing a logistics model that will predict the involvement of digitization in the
process of logistics and its practical application.
References
Leonard, V. K. (1982). Petroleum pipelines. In Homburger, W.S. (ed.). Transportation and traffic engineering handbook
(2nd edition). Institute of Transportation Engineers, Englewood Cliffs: Prentice Hall, pp. 101-13.
Ballou, R. H. (2004). Business logistics/supply chain management (5th edition). Upper Saddle River: Pearson Prentice
Hall.
Bowersox, D. J., Closs, D. J. & Cooper, M. B. (2007). Supply chain logistics management (2nd edition). New York:
McGraw-Hill.
Grant, D. B., Lambert, D. M., Stock, J. R. & Ellram, L. M. (2006). The fundamentals of logistics management (European
edition). Berkshire: McGraw-Hill.
Hofmann, E., & Rüsch, M. (2017). Industry 4.0 and the current status as well as future prospects on logistics. Computers
in Industry, 89, 23-34.
Kagermann, H. (2015). Change through digitization—Value creation in the age of Industry 4.0. In Management of
permanent change (pp. 23-45). Springer Gabler, Wiesbaden.
Moller, C. (2008). Chief executive: Transnet pipelines. Private communication on 7 October 2008.
Reza Naghizadeh
National Research Institute
for Science Policy (NRISP), Iran
E-mail: naghizadeh@nrisp.ac.ir
Mahdi Hajari
University of Tehran /
Faculty of Management, Iran.
E-mail: mhajari.67@ut.ac.ir
Sajedeh Basavand
Allameh Tabataba’i University, Iran
E-mail: sajedeh.basavand@gmail.com
Abstract
This paper identify and prioritize the affecting factors on satisfaction of NTBF’s in collaborating with national
financial funds from perspective of policy makers and executives in Iran. The research methodology is
quantitative method based on explanatory factor analysis. First, the preliminary affecting factors such as quality,
adaptability and diversity of service proportionate to NTBFs need, proper employee interaction, suitable
communication platform, flexibility in monitoring, demand classification in terms of importance and
required speed were identified based on literature review and interviews with experts. Thereafter, based
on explanatory factor analysis method, the preliminary factors are classified in 6 aspects. The results presents the
affecting factors and priorities for increasing satisfaction of NTBF’s in collaborating with national financial funds.
The integrated system and transparency category is the most important category.
Keywords: NTBF, Collaboration with Financial Funds, Financial Funds
1. Introduction
Developing the knowledge based economy concept and accepting the principle that, today, the
production and use of knowledge are the main source of wealth creation and economic growth have
encouraged the policy makers in different countries to develop policies, strategies and frameworks
in order to achieve knowledge base economy.
NTBFs are one of the most important factors in knowledge based economy and therefore,
strengthening this firms is one of the most important policies and strategies in transition to
knowledge based economy. Appropriate financing for NTBFs, based on their development stage
and their requirements, is one of the most important challenges in establishing and continuing the
activities of NTBFs (Ghazinoori, Bamdad Soofi, & Radaei, 2017). Therefore, funding NTBFs in a
way that provides appropriate financial resources, in a right time and in an appropriate situation for
this firms, is crucial. In addition, because of the differences in NTBFs activities compared to other
firms, solving their financial issues need institutions that synchronize the financial resources based
on the special nature of NTBFs (Aboojafari, Elahi , & Paigham, 2013). These institutions must
choose the best financing mechanism for NTBFs based on their needs and their life-cycle. Therefore
in some countries like Iran, in order to provide special financing for NTBFs, national financial
institutions were established.
Then the NTBFs collaborations with national financial funds and their satisfaction in this
collaborations become important. This satisfaction and the affecting factors on that, can be studied
from two perspective. One is from NTBFs perspective and another is from executives of national
financial funds as well as related policymakers. This research is designed with the aim of identifying
the affecting factors on satisfaction of NTBF’s in collaborating with national financial funds from
perspective of policy makers and executives in Iran.
By the Iranian knowledge based firms and commercialization of innovation and invention support
law, in this research NTBFs means “a private or cooperative firm or institution which is established
in order to synergizing science and wealth, the development of knowledge based economy, the
achievement of scientific and economic objective (including the expansion and application of
invention and innovation) and commercialization of R&D results (including the design and
production of goods and services) in the field of high technology and high value added technology
especially in the production of related software” (knowledge based firms and commercialization of
innovation and invention support law, 2010).
The article is organized as follow. Section 2 gives a brief overview of the existing literature about
NTBFs financing. The details of the methodology are discussed in section 3. In section 4 we present
the result. Conclusions are discussed in section 5.
2. Literature Review
Financing means providing capital for businesses, consumers and investors in order to achieve
their goals. In fact, investment, profitability, reduce risk and meet the economic and social need are
financing goals (Azizi & Malayjerdi, 2017).
NTBFs transform new ideas to new products and services and present them to the market, because
of this firms have an important role as an engine of knowledge based economy. On the other
hand, this firms, as the main source of innovation, have challenges in financing and acquire their
required financial resources (Alizadeh, Sirkesian, & Ghazinoori, 2009). Appropriate financing can
be mentioned as an important issue for the survival and growth of this firms (Ghazinoori, Bamdad
Soofi, & Radaei, 2017).
NTBFs have different characteristics in terms of risks and efficiency, in the different stage of their
life cycle. Therefore, the financing of these firms is different in each stage of their life cycle. The
appropriate financing method for each stage is shown in figure 1.
Figure 1: The Appropriate Financing Method for Each Stage of NTBFs Life Cycle (Lasrado & Lugmayr, 2013)
In addition, traditional financial institutions such as banks are not interested in financing NTBFs
because of the innovative nature, the short life cycle of technology, the need for new markets, the
non-linear and complex work processes and uncertain future of NTBFs. Therefore in some countries,
like Iran, government establish national financial funds in order to provide financial assistance,
facilities and investments for these firms (Gol Alizadeh, Tabatabaeiyan, & Zaeferanian, 2009).
The researches in this area studied the extent and the factors affecting the satisfaction of different
firms in collaborating with financial institutions. In fact, studying the affecting factors on satisfaction
of NTBF’s in collaborating with national financial funds from perspective of policy makers and
executives is neglected.
Table 1, which is summarized the literature review, show the affecting factors on NTBFs satisfaction
in collaborating with financial funds.
Table 1: Show the Affecting Factors on NTBFs Satisfaction in Collaborating with Financial Funds
3. Research Methodology
The research methodology is quantitative method based on explanatory factor analysis. This research
is designed in three steps. First, based on literature review and library studies, the affecting factors on
satisfaction of NTBF’s in collaborating with national financial funds from perspective of policy makers
and executives in Iran are identified. Next, 7 interviews were done to confirm the identified factors
from perspective of policy makers and executives in Iran. The interviews are semi- structured and
gradually, based on the responses and coding the responses 10 factors were added to identified factors.
In the last step, in order to classify and prioritize the identified affecting factors, a questionnaire
with seven-point scale and 18 questions were designed. 37 questionnaires were received from funds
managers and experts and also analyzed based on explanatory factor analysis. After designing the
questionnaire, Content Validity Method was used to test the questionnaire validity and
Cronbach’s Alpha was used to estimate the reliability of the questionnaire. Alpha coefficient was
calculated for each of the variables separately all of which were greater than 0.7 (0.799).
Therefore, the questionnaire was considered reliable.
Also, to determine the suitability of gathering data for using the explanatory factor analysis, Kaiser-
Meyer-Olkin test is used. The KMO value is 0.534 for gathered data and sig value is 0. Because
the KMO is between 50 to 69 percent and sig value is less than 5 percent, the gathered data in the
third step of this research have the required correlation for using explanatory factor analysis and are
appropriate for this analysis.
The target population of the research includes all the national financial funds experts and managers
as well as financial funds experts and policy makers in Iran.
4. Results
The preliminary affecting factors on NTBFs satisfaction in collaborating with funds are shown in
table 1. In order to valid these factors from perspective of policy makers and executives in Iran 7
interviews were done. After coding and analysing the responses the affecting factors on satisfaction
of NTBF’s in collaborating with national financial funds from perspective of policy makers and
executives in Iran are increased to 18. Table 2 show these factors.
Table 2: the Affecting Factors on Satisfaction of NTBF’s in Collaborating with National Financial Funds from
Perspective of Policy Makers and Executives in Iran
1 Rational Expectations from National financial funds Interview with Experts VAR00001
17 Management advice That Will Lead To Project Success Literature Review VAR00017
After identification of the affecting factors on satisfaction of NTBF’s in collaborating with national
financial funds from perspective of policy makers and executives in Iran, the identified factors were
categorized and prioritized with explanatory factor analysis. For that, 37 received questionnaire were
analyzed. Table 3 shows the rotated matrix of identified factors.
Table 3: The Rotated Matrix of Identified Factors
Component
1 2 3 4 5 6
Based on table 3, the 18 affecting factors were categorized in 6 categories: 1. Integrated system
and transparency, 2. Entrance interactions, 3. Mental Structure, 4. Management of Expectations,
5. Compatibility of Facilities(services and financial supports) and 6. Proper employee interaction.
Then the weight of each category is calculated and based on that, the priority of each category is
determined. Table 6 shows this results.
5. Conclusion
The 18 affecting factors on satisfaction of NTBF’s in collaborating with national financial funds
from perspective of policy makers and executives in Iran were identified in this research.
Then, the identified factors were categorized in 6 categories and their priority to policy makers
and executives were determined. These categories based on their priority are: 1. Integrated system
and transparency, 2. Entrance interactions, 3. Mental Structure, 4. Management of Expectations, 5.
Compatibility of Facilities and 6. Proper employee interaction.
Identifying the affecting factors on satisfaction of NTBF’s in collaborating with funds which provide
special financing for NTBFs is neglected in the literatures. In this research, researchers were focused
on this concept and identified the factors from perspective of policy makers and executives in Iran.
Because the results are extracted from perspective of policy makers and executives, the policy
makers and researchers in Iran and other countries especially developing countries can use the
findings of the research to develop and modify the laws, policies and strategies related to national
financial funds in order to presents better special financing to NTBFs and consequently acquiring or
developing knowledge base economy in their country.
The affecting factors on satisfaction of NTBF’s in collaborating with national financial funds can be
different from perspective of NTBFs. So identifying these factors from perspective of NTBFs and
comparing the differences and similarities can be suggested topics for the next researches.
REFERENCES
Aboojafari, R., Elahi , S., & Paigham, A. (2013). A Conceptual Framework for Holonic Inter-System Analysis: A
Theoretical Study on the Relationship between inancial and Innovation System. Innovation Management,
2(3), 99-124.
Ahmadi, P., & Pourashraf, Y. (2007). Customer’s Path to Satisfaction at Commercial Banks. Management Research in
Iran, 11(3), 29-58.
Alizadeh, P., Sirkesian, A., & Ghazinoori, S. (2009). Government and Technology Entrepreneurship: An Introduction to
Support Policies from NTBFs. Tehran: Industrial Research & Training Center of Iran.
Azizi, M., & Malayjerdi, M. (2017). Social Entrepreneurship Financing Methods. Financial Research Journal, 19(1),
119-138.
Bazaei, G., & Rezaeian, N. (2014). Investigating and ranking the factors affecting the satisfaction of city bank customers
from providing services and its relationship with brand loyalty (Case study: Shahr Bank Branch in Tehran).
Business Management, 7(27), 27-46.
Ghazinoori, S., Bamdad Soofi, J., & Radaei, N. (2017). A Framework for Selecting Financing Instruments Based on
Knowledge-Based Firms Clustering. Journal of Science & Technology Policy, 9(2), 13-30.
Gol Alizadeh, M., Tabatabaeiyan, H., & Zaeferanian, R. (2009). Provide a systemic solution for establishing institutions
to financing the new established knowledge base firms in Iran. Pardis Technology Park(17), 46-52.
(2010). knowledge based firms and commercialization of innovation and invention support law.
Lasrado, L., & Lugmayr, A. (2013). Crowdfunding in Finland: A New Alternative Disruptive Funding Instrument for
Businesses. Proceedings of the 17th International Academic MindTrek Conference, (pp. 194-201).
Maswadeh, S. (2015). An evaluation of SMEs satisfaction toward Jordanian Islamic banks service quality. Procedia
economics and finance, 23, 86-94.
Mokhtari, G. (2009). New methods of customer orientation and scientific marketing in Iranian banking. Banking
knowledge, 29-30, 46-48.
Ravanband, F. (2005). Investigating the main factors creating and increasing trust among key customers of the banking
system (Case Study: Key Customers of the Bank of Entrepreneurship). Tehran: Alzahra University (M.A
Thesis).
Sabir, R., Ghafoor, O., Akhtar, N., Hafeez, I., & Rehman, A. (2014). Factors affecting customer satisfaction in banking
sector of Pakistan. International Review of Management and Business Research, 3(2), 1014-1025.
Skordoulis, M., & Pekka-Economou, V. (2015). Analysis of the Factors Affecting Customers’ Satisfaction from the
Greek Banks. Proceedings of eRA-10 International Scientific Conference: Economy I Session, (pp. 32-40).
Cheng Yin
Northwestern Polytechnical University, Office,
of International Cooperation, China
E-mail: chengyin@nwpu.edu.cn
Abstract
Along with the development of higher education in China, the country has become an increasingly popular study
destination for overseas students at both under-graduate and post-graduate levels. While the market for international
education in China has thus started to prosper, it has also drawn the attention of government and society with a
particular focus on the quality of education provided. This article will put forward strategies to conduct a
student-centered evaluation system for the quality of international students’ education and thus aims to enhance the
attractiveness of Chinese universities in today’s global education market.
Keywords: Higher Education, International Students, Education Quality, Quality Assessment
1. Introduction
As more and more international students come to China to pursue higher education, Chinese
universities have begun to pay much greater attention to the quality of education these students
require. Therefore, it is vital to consider ways of improving evaluation systems both to enrich the
underlying theory and to extend related fields of research. This will help us to establish a more
comprehensive evaluation system that will enable us to improve the quality of education provided
to international students.
To evaluate the education quality of international students scientifically and precisely will offer a
useful source of reference for the government’s official management and decision-making. It will
help the government to update educational concepts, conduct educational reform and improve the
guarantee mechanisms of education quality. It will also encourage Chinese universities to upgrade
their management capacity and promote the development of international students’ education quality.
Furthermore, the evaluation system will improve the global reputation of Chinese universities and
attract more high quality international students to study in China.
7. Conclusion
In a student-centered evaluation system, the international students can choose the evaluation
indexes according to their own demands from the education service. As the direct customers of the
education service it is the international students who can best decide its quality and value. Such an
evaluation system based on the principles of student-centered education is an effective response to
the commercialization of the global education market.
Reference
Kerlin, Christine A.,(2000), Measuring Student Satisfaction with the Service Processes of Selected Student Educational
Support Services at Everett Community College [D]. Oregon State University, 46.
Liu, C.Y., Wang, Y. and Liu, X.Q., (2018), Research on the Education Quality Assurance System of Undergraduate
International Students[J]. Finance Theory and Teaching, (02), 110-112+118.
Lv, Y.Z., (2018), New Strategies to Assure the Education Quality of International Students [J]. Journal of World
Education, 31(02), 23-28.
Shen, X. and Hu X., (2017), Strategies to Assure the Education Quality of International Students Under the “Belt and
Road” Initiative [J]. Journal of World Education, 30(22), 18-22.
Zeng, W., G. and Yang, J.F., (2017), The Evolution of Constructing the Education Quality Assurance System for
International Students in China. [J]. Jiangsu Higher Education, (11), 44-47.
Ashutosh Jha
Indian Institute of Management Calcutta
E-mail: ashutoshj14@iimcal.ac.in
Prakrit Silal
Indian Institute of Management Calcutta
E-mail: prakrits16@iimcal.ac.in
Debashis Saha
Indian Institute of Management Calcutta
E-mail: ds@iimcal.ac.in
Abstract
A seamless high-speed wireless network connectivity is the most fundamental requirement of the rapidly emerging
hyper-connected society. Such network connectivity must be able to exchange high volume data traffic at low
latencies actively. The currently existing mobile network generations, namely second (2G), third (3G) and fourth
(4G) generations, are inadequate to meet such requirements of data volume and speed. However, the fifth generation
(5G) of mobile networks - to be available commercially after the year 2020 - are hailed as the solution to these
rising demand for service quality levels. The early prototypes of 5G exhibit: highly improved user experience due
to enhanced efficiencies in spectrum utilization, higher throughput per unit cost, and lower energy consumption.
The regulatory bodies in various parts of the world, including the USA, China, Europe, and India are understandably
aligning the road-maps and priorities for a coordinated 5G deployment in their respective countries.
The slowly evolving business case for 5G, however, still needs to be made on a country by country basis. We draw
attention to one such aspect which is missing emphasis in the extant academic research related to the business case
for 5G in India. Specifically, the extant research in the Indian scenario lacks in the techno-financial feasibility
assessments for different deployment use-cases, i.e., metropolitan, urban, suburban and rural. The available
literature also does not incorporate rigorous demand forecasting of the market potential (in terms of the number
of subscribers as well as the transient data volume demand) for 5G under each use-case. In the absence of these
feasibility analyses, the Mobile Network Operators’ (MNOs) uncertainty regarding the returns from infrastructure
deployment and service provisioning remains high.
This study, therefore, provides a use-case scenario-based assessment of techno-financial feasibility for 5G
deployment in India. We take into account growth curve-based demand forecasting of 5G services from the
MNOs perspective. The analysis incorporates 5G characteristics of network densification, use of newer spectrum
bands belonging to the millimeter-wave (mmWave) frequency and the cellular coverage and capacity constraints
in a heterogeneous network (HetNet) framework. We evaluate the demand of 5G during 2020-2030, the expected
levels of network infrastructure to ensure cellular coverage and cellular capacity, and the capital (CAPEX) and
the operational (OPEX) expenditures incurred in such deployments. The modeling approach followed in the paper
uses a combination of ordinary- and non-linear least-squares (OLS and NLS, respectively) regression – used for
the growth curve-based forecasting. Based on our analysis, we posit that standalone deployment of 5G services can
ensure seamless delivery of mobile broadband services in the wake of higher data demand of the consumers, while
also being financially feasible, however, the legacy networks and the financial locking-in of the incumbent MNOs
due to the presence of such legacy networks, would be the real challenge for all the stakeholder to overcome in the
coming years.
Keywords: Cellular Networks, Demand Forecasting, HetNets, Massive MIMO, Sensitivity Analysis, 5G
1. Introduction
A hyper-connected society is rapidly emerging, owing to the vast growth in the wired and
wireless network connectivity that is capable of exchanging high volume data at staggering speeds
(Xiang et al., 2017). The global data traffic is likely to witness a 20000 fold increase between years
2020-2030 due to the rise in the number of interconnected devices and the emergence of newer
services therefrom. This unprecedented growth in data traffic and radio network infrastructure
IAMOT 2019 | 610
Techno-managerial Considerations for 5G Deployment in India
calls for the fifth generation (5G) of mobile communication systems (Gupta and Jha, 2015).
5G promises greatly improved user experience at much lower costs due to its enhanced
efficiencies in spectrum utilization, higher throughput per unit cost, and lower energy consumption
(Xiang et al., 2017; GSMA Intelligence, 2014). The improvements in 5G are a result of new air interfaces
and multiple access schemes operating in high-frequency spectrum bands, such as millimeter wave
(mmWave ~ 30-300 GHz) (Nikolikj et al., 2014), which allows for higher bandwidth availability
(up to 1 GHz) and increased data rates. Massive MIMO is one such new air interface that can
leverage the high spectral efficiency of mmWave, when used in a heterogeneous network (HetNet)
configuration (Figure 1), to deliver enhanced cellular throughput (Xiang et al., 2017; Gupta &
Jha, 2015). The 5G HetNets are capable of combining several cellular layouts, such as macrocells,
microcells, and small cells (picocells, femtocells, and Wi-Fi), that can cater to the requirements
of both lower-frequency wide-area-coverage networks and higher-frequency ultra-dense networks
(GSMA Intelligence, 2014). This is achieved by the intelligent integration of Long-Term
Evolution (LTE) technologies (viz., LTE and LTE-Advanced (LTE-A)) operating in
macrocellular configurations with ultra-dense cellular networks comprising micro and small-cells
(GSMA Intelligence, 2014). The HetNets can also free up large amounts of radio spectrum
bandwidth via local offloading techniques, use of unlicensed spectrum bands (Wi-Fi and femtocells),
and close internetworking of communication end-points, leading to greater spectrum utilization
(Gupta & Jha, 2015; GSMA Intelligence, 2014; Nikolikj et al., 2014).
It is, therefore, not surprising that several countries are aligning roadmaps and priorities for
coordinated 5G deployment in the near future. In the United States, the Federal Communications
Commission’s (FCC) Spectrum Frontiers Order has already laid the groundwork for 5G
deployment by 2020. Similar initiatives pertaining to the early deployment of 5G networks have
also been started by regulatory agencies in China, Japan, South-Korea and Sweden, to name a few.
In Europe, the European Commission has recently released its “5G Action Plan”, which targets early
network introduction by 2018 and commercial large-scale introduction by the end of 2020, for all
member states (EPRS, 2017). One of the key aspects of the envisaged 5G rollouts is the selection
of the radio spectrum bands. The leading countries are selecting bands within the frequency range
26.5 – 29.5 GHz (commonly known as 28 GHz band) apart from other portions of the radio spectrum
(EPRS, 2017). These mmWave frequency bands have a massive amount of spectrum bandwidth
availability which could be used for both cellular and backhaul services, making them a favorite
choice for 5G deployments (Xiang et al., 2017; Sulyman et al., 2014). In Europe, the use of lower
frequency bands, such as 700 MHz, has also been mentioned for 5G deployments. The lower
frequency 700 MHz band is found to be suitable for Internet-of-Things (IoT) and automotive
applications (EPRS, 2017).
The slowly evolving business case for 5G, however, still needs to be made on a country by country
basis. We draw attention to one such aspect that lacks emphasis in the extant academic research related
to the business case for 5G in India. Specifically, the extant research in the Indian scenario lacks in
the techno-financial feasibility assessments for different deployment use-cases, i.e., metropolitan,
urban, suburban and rural. The available literature also does not incorporate rigorous demand
forecasting of the market potential (in terms of the number of subscribers as well as the transient data
volume demand) for 5G under each use-case. In the absence of these feasibility analyses, the Mobile
Network Operators’ (MNOs) uncertainty regarding the returns from infrastructure deployment and
service provisioning remains high.
This study, therefore, provides a use-case scenario-based assessment of techno-financial feasibility
for 5G deployment in the Metros Telecom Circles1 of India, which comprises the cities of Delhi,
Mumbai and Kolkata. We take into account growth curve-based demand forecasting of 5G services
during years 2020-2030, from the MNOs perspective. The analysis incorporates 5G characteristics
of network densification, use of newer spectrum bands belonging to the millimeter-wave (mmWave)
frequency and the cellular coverage and capacity constraints in a heterogeneous network (HetNet)
framework. We evaluate the capital (CAPEX) and operational (OPEX) expenditures that would
be incurred in 5G network infrastructure once the commercialization of 5G services begins to take
place. We follow a modeling approach which combines ordinary- and non-linear least-squares
(OLS and NLS, respectively) regression analysis for the growth curve-based demand forecasting of
5G services. While the case chosen in the study is that of the country of India, the methodology is
generic enough to be applied for any other country as well.
The remainder of this paper is structured as follows. Section 2 provides an overview of the related
literature and therefrom draws upon our research objectives. In Section 3, we explain our research
methodology, providing details on various components of our techno-economic model along with
their theoretical background. In Section 4, we provide the dataset used, the input values of the
decision variables, and the subsequent results. Finally, Section 5 concludes on our findings and
identifies the implications for praxis.
2. Literature Review
In this section, we provide a brief overview of the background and the previous research works that
have studied the techno-economics behind provisioning of 5G wireless networks under different
deployment scenarios. We also introduce, in addition, the related literature coherent with various
modeling approaches undertaken in this study. We then summarize the research gaps and propose
our extensions.
(LTE and LTE-A), assuming varying scenarios for data volume demand. The study does take into
account the size of the spectrum bandwidth, albeit the bands belonging to 4G LTE and LTE-A
technologies only (Nikolikj & Janevski, 2014).
Another study by Yunas, Niemela, Valkama, & Isotalo (2014) analyzes the technical and cost
parameters in utilizing the three cellular layouts, namely macrocells, microcells and femtocells
for network densification. Considering four main deployment strategies, namely, macrocells only,
microcells only, femtocells only, and macro-femto HetNet combinations, the study evaluates
the cellular coverage, interference characteristics, area spectral efficiency, and energy and cost
efficiency (Yunas, Niemela, Valkama, & Isotalo, 2014). Few more studies have evaluated
the cost implications arising out of the integration of two enabling paradigms viz., Software
Defined Networking (SDN) and Network Function Virtualization (NFV), in 5G deployment
(Bouras et al., 2016). Specifically, the work by Bouras (2016) compares the cost aspects
(CAPEX, OPEX and TCO) for such virtualized 5G networks vis-à-vis traditional 5G network.
In another study, Bouras (2016) evaluates the cost aspects (CAPEX, OPEX and TCO) of 5G
deployment scenarios involving two network architectures, namely Ultra-dense technology
(femtocells) and Distributed Antenna Systems (DAS) (Bouras et al., 2016; Bouras, Kollia, &
Papazois, 2016b; Bouras, Kollia, & Papazois, 2016a). The above-mentioned works have highlighted
the advantages in catering to the challenges of limited connectivity in indoor environments, due to
these two network architectures.
Some studies have highlighted the benefits of using small cell technology for ensuring connectivity
in indoor environments owing to its enhanced cell coverage and network capacity (Bouras,
Kokkinos, & Papazois, 2014). These studies have explored the cost aspects (CAPEX, OPEX and
TCO) of small cells deployment from the point of view of the telecom operators while listing the
subscriber incentives for choosing small cells over other access types such as WiFi. The results of the
techno-economic analysis for small cells have also been compared against a macrocellular
deployment scenario in order to highlight its advantages (Bouras et al., 2014). In another recent
work, Smail & Weijia (2017) analyze the demand aspects of a newly proposed pricing model of 5G
mobile services for the telecom operators in China. The work formulates the likely migration scenario
of subscribers from the 4G mobile services to 5G mobile services and evaluates the sensitivities of
data volume demand with respect to the price of the 5G mobile services (Smail & Weijia, 2017).
In another extensive work related to the techno-economics of 5G networks, Oughton et al.
(2018) have conducted “a scenario-based assessment of 5G infrastructure strategies in relation
to mobile traffic growth” for the country of United Kingdom (Oughton et al., 2018). Similarly,
Jha and Saha (2017) in their work pertaining to the 5G infrastructure deployment in Texas, US,
“evaluate the profitability potential for realistic 5G deployment scenarios over 28 GHz frequency”
(Jha and Saha, 2018).
3. Research Methodology
In this section, we explain the research framework followed in our study. Additionally, the model
formulation steps for our techno-economic evaluation exercise is highlighted in the relevant sections
IAMOT 2019 | 613
Managing Technology for Inclusive and Sustainable Growth
pertaining to demand modeling, coverage and capacity modeling, and finally, cost modeling.
Figure 2 summarizes the scenario considered in the evaluation carried out as part of this study.
As mentioned earlier, we choose the three major cities of India, namely Delhi, Mumbai and Kolkata,
for initial 5G deployment. Previous studies have posited the temporal growth in 5G deployment to
move from urban to rural areas (Oughton et al., 2018). This study also assumes that 5G would be
initially deployed in the urban metropolis of India and slowly diffuse to other regions based on the
learning effects.
For a comparative evaluation, we consider the following network types in our analysis: (i)
Macrocellular layout–a high power cell site mounted on ground-based masts, rooftops, etc., and
having cellular coverage of up to 35 km, (ii) Microcellular layout–a low power base station having
cellular coverage of up to 2 km, (iii) Picocellular layout–a low power small cellular base station
having cellular coverage of 200 meters or less and typically used in residential premises, shopping
malls, train stations etc., and (iv) Femtocellular layout–another low power small cellular base station
having cellular coverage of up to 10 meters, and typically designed to be used in smaller premises,
such as homes and small size offices. These deployment types are combined in various ways to
form several 5G specific scenarios, such as Indoor Hotspots, Dense Urban and Urban Macro to
name a few, as per the guidelines of 3rd Generation Partnership Project (3GPP) (Xiang et al., 2017),
(“5G PPP Architecture Working Group View on 5G Architecture View on 5G Architecture,” n.d.).
Largely, we combine the above-mentioned layouts into two network deployment types, namely
Macrocellular–which includes the microcellular layout, and the Picocellular layout–which combines
Pico- and Femtocellular layouts.
Considering that 5G services will be data-intensive, with cellular data per population per time period
being the primary metric for service usage, we utilize the data demand forecast (in Gigabyte (GB)
per subscriber per year) for India, during the period 2020-2030, in our analysis. Subsequently, to
evaluate the aggregate data demand over the duration of the study, we also forecast the likely market
adoption – in terms of subscriber volume per year – of 5G services in the chosen cities. The data
demand per population per time period and the annual subscriber forecast is used for evaluating the
aggregate data volume demand in each city. We utilize the micro-level demographic dataset, which
comprises the population density and the habitable land area details, for each of these chosen cities
in our analysis (Indiastat, n.d.).
In the absence of prior 5G market adoption data, we approximate the initial adoption trend
of 5G to be similar to 4G services across the chosen cities. While this may be a simplistic
suggestion, to say the least, it is justified considering the similarity in the 4G and 5G family of
mobile broadband service innovations along with the fact that the realization of the full potential
of 5G will happen in an incremental manner involving intermediate generations, such as 4.5G
(LTE-Advanced). Approximating the future market adoption trend of a newly launched innovation
with the prior generation of the innovation is also a recommended practice in the literature
(Rogers, 2010). Additionally, since 5G will cater to a variety of use cases (especially pertaining
to large-scale industrial applications, such as Industrial Internet-of-Things (IIOT)) this study does
not intend to incorporate them all, and further studies would need to undertake the analysis of each
specific use case instance. We only focus on the techno-economic implications of mobility-centric
usage of 5G services. We also must note that the MNOs in India are already gearing up for 5G
through rapid phasing out of legacy networks (2G and 3G) along with the overhaul of their radio
network infrastructures to keep them 5G-ready. For the 5G-ready network infrastructure migrating
from 4G to 5G may only be a matter of a firmware update.
(1)
where f(t) is the likelihood of purchase at time t, F(t) is the fraction of the ultimate potential of
the market that has adopted by time t, p is the coefficient of innovation, and q is the coefficient of
imitation. The solution to the above equation is given as:
(2)
where M is the ultimate market potential. The ultimate market potential is an estimate of the
maximum adoption that is expected of the innovation during its lifetime. The Bass model assumes
a finite market size due to which the adoption curve reaches saturation once the peak sales have
occurred and starts declining afterwards. The parameters mentioned in the above equations are
initially estimated using the discrete form of Bass model using OLS regression over the historical
data of Broadband adoption. These estimated parameter values are then supplied as initial inputs in
the NLS estimation procedure using the above equations. The discrete form of Bass model equation
utilized in the study is given as:
(3)
where N(ti) is the cumulative number of adoptions till time period i, and b1,b2 and b3 are the
coefficients of the discrete Bass model. Knowing the parameters b1,b2 and b3, we can calculate M, p
and q using the relations mentioned below:
(4)
We use equations (1)-(4) for explaining the diffusion of 4G services in India. Towards this, we use
the monthly adoption data of 4G Vo-LTE services for the chosen regions provided by the Wireless
Subscribers report of Telecom Regulatory Authority of India (TRAI, 2017). We remind the readers
that, the VoLTE services were launched countrywide, starting September 2016, by the new entrant
“4G-only” operator, Reliance Jio Infocomm. We prefer the dataset of 4G VoLTE adoption, when
compared to the mobile services dataset made available by TRAI, considering that the mobile
services dataset only measures aggregate subscription taking together all mobile service generations
(2G, 3G and 4G). This is also justified by the apprehensions of intense inter-MNO competition at
the time of the launch of 5G services (Khan, 2018), which may lead to reduced service prices of 5G
for the consumers.
The monthly data of 4G VoLTE market adoption corresponds to the duration September
2016–August 2018. We first estimate the Bass model parameters using the ordinary least-squares
(OLS) approach as mentioned above. This is followed by the non-linear least-squares (NLS)
approach, whereby we derive the parameter values to be used for forecasting. The forecast duration
is kept between years 2020-2030, considering that 5G services will be commercially available only
after 2020.
We also use the forecast of mobile data demand per subscriber, during years 2020-2030, provided
by Business Monitor International (BMI) database, in order to derive the aggregate data demand,
which takes into account the annual subscriber forecast from the Bass model. We should note that
the mobile data demand estimates are at the pan-India level and not specific to any city. However,
the city-specific 5G subscriber forecast, to an extent, takes care of the likely inter-city deviations in
the aggregate data demand during 2020-2030.
We combine the annual 5G subscriber forecast (Ncity,year) and the individual data demand forecast
(Dyear) to derive the aggregate annual data demand in each city (TBcity,year), as follows.
(5)
achievable cellular coverage area per deployment type. Assuming a circular cell with radius , for
the chosen deployment type (i, where i=macrocellular, microcellular, picocellular, femtocellular)
and frequency band (f), the coverage area Ci,f for each deployment type and frequency-band is
expressed as:
(6)
We then determine the required number of cellular deployments (base transceiver stations (BTS)),
for each deployment type and frequency band combination, by taking into account the data for the
habitable area for the chosen cities. The number of BTSs required for cellular coverage under each
scenario can be evaluated as:
(7)
While the BTS requirements for ensuring cellular-coverage are static for a given city and deployment
type combination (due to the fixed land area and cellular radius under a frequency band), the
cellular-capacity is subject to the service usage pattern (data demand, busy-hour period, peak uplink
and downlink rate, spectrum bandwidth deployed, number of subscribers per BTS, etc.) specific to
the location of deployment. Therefore, the BTS requirements are temporal and dependent on such
service-usage patterns. Additionally, there may be differences in the BTS requirements for ensuring
cellular-coverage and cellular-capacity (since, cellular coverage is dependent on the geographical
area and frequency band, whereas cellular-capacity is frequency-agnostic and only depends on the
factors related to service usage patterns, as mentioned earlier).
We determine the BTS requirements for ensuring cellular-capacity (BTSCAPcity,year), by taking into
account the annual aggregate subscriber data demand in each city (TBcity,year) and the data delivery
capability of a single BTS pertaining to each deployment type (BTSi,year). This is expressed as:
(8)
As explained earlier, the effective number of BTSs under each deployment scenario, required for
meeting both cellular-coverage and cellular-capacity requirements, are evaluated by taking the
maximum of equation (7) and equation (8).
(9)
where CAPEXi is the required capital expenditure per BTS for i-th deployment scenario, BTSCi and
INSTi are the annual costs incurred in BTS equipment procurement and installation, respectively,
and BHLi is backhaul cost. We do not consider the spectrum investments due to unavailability of
spectrum costs data for India. Similarly, the OPEX per unit BTS per year, for each deployment
scenario is evaluated as:
(11)
where OPEXi,annual is the required operational expenditure per BTS for i-th deployment scenario,
OAMi,annual is the annual OA&M costs per BTS for i-th deployment scenario and MAi,annual is the
aggregate annual marketing and advertising expenses incurred by the operator. Finally, the annual
TCO for the operator is calculated as:
(12)
We must note that the TCO in equation (12) only represents the infrastructure costs (both fixed
and recurring), and do not incorporate the costs incurred in acquiring the radio spectrum for 5G.
The CAPEX and TCO also assume a Greenfield deployment scenario, since the data pertaining to the
Brownfield scenario, i.e., the city-wise aggregate investments under legacy network infrastructures
are unavailable. However, such scenarios can be incorporated by adjusting the additional CAPEX
required in infrastructure upgrade from legacy networks to 5G network.
In this section, we mention the modeling assumptions pertaining to each variable and highlight
the results for each scenario considered. Table 1 below summarizes the assumptions pertaining to
the deployment scenarios considered in the analysis. We use the macrocellular and picocellular
network layout to correspond to 4G LTE-Advanced and 5G deployments, respectively. The 5G
network will also deploy radio access network based on Massive MIMO configuration functioning
on the millimeter Wave (mmWave) spectrum. We consider a minimum data rate of 50 Mbps for all
deployment scenarios.
Table 1: 5G Deployment Scenarios Assumptions
Table 3 summarizes the results of the Bass model estimation when applied to the data of 4G-VoLTE
subscription as mentioned earlier. The coefficient of innovation (p) evaluates to be much higher
than the coefficient of imitation – emphasizing the importance of the innovators over early and
late majority adopters. The results, however, are in contrast to the Bass model parameter values
estimates for other innovations, where the coefficient of imitation (q) is almost always higher than
the coefficient of innovation (p). We ascribe this behavior to the dataset used for the Bass model
analysis, which is the adoption data of 4G VoLTE in India, currently in the early growth phase where
the innovators have a major role to play. We assume the values of M for each city (Table 3) due to
the underestimation of M values in the Bass model from the given data – based on OLS and NLS
regression analysis. Figure 3 illustrates the adoption trend of 5G services – as approximated from the
4G VoLTE forecast – during years 2020-2030.
Figure 3: Bass Model-based 5G Adoption Forecast in India (High Demand scenario only)
In Figure 4, we have only presented the forecast for high demand scenario, pertaining to the city of
Delhi, for brevity’s sake. We can infer that the 5G market adoption trend shows promising uptake
till the year 2026, post which there is a decreasing rate of adoption. The adoption will likely saturate
by the year 2027 similar to the decadal diffusion pattern of early generations of mobile services
(2G, 3G and 4G). We use the forecast for the mobile data demand of individual subscribers to
evaluate the expected aggregate data demand from the 5G networks (BMI Research, 2017). Figure 4
highlights such mobile data demand forecast. The aggregate data demand forecast during 2020-2030
is not presented due to space constraints.
Table 3: Bass Model Estimation Results
M (assumed)
City p q M (estimated)
Low Medium High
Delhi 0.336194 0.00001 9409938 12489319 24978638 39965821
Kolkata 0.207618 0.00001 4734966 6603806 13207613 21132181
Mumbai 0.188156 0.00001 7236469 8748090 17496181 27993889
Figure 4: Mobile Data Demand Forecast per Subscriber (Source: BMI Database)
We use equations (6)-(9), to evaluate the coverage and capacity variables for the considered 5G
and 4GF LTE-A demand scenarios. The evaluated variables are summarized in Table 4. The input
assumptions pertaining to the variables in the model formulations, along with the sources, have also
been summarized in Table 4.
Table 4: Cellular Coverage Calculations
Variable\ Layout Macrocellular Picocellular Source
Frequency 700 MHz 30 GHz -
Cellular radius (km) 1.250 0.150 (Jha and Saha, 2017; Jha and Saha, 2018)
Cellular Coverage (sq. km) 7.812 0.112 -
Spectral Efficiency (bit/s/Hz/BTS) 3.8 52
(Jha and Saha, 2017; Jha and Saha, 2018)
Data Rate 76 Mbps 26 Gbps
Busy Hour 70% 70% -
Data capacity per BTS (TB/year) 295.5 101088.0 -
Delhi 190 13250 -
Coverage
Mumbai 77 5388 -
Requirements of BTSs
Kolkata 24 1652 -
We can infer from Table 4 that, the number of BTSs required for ensuring cellular coverage pertaining
to the picocellular layout is very high when compared to those required under the macrocellular
layout. Specifically, in the macrocellular deployment scenario, the number of BTSs required to
provide full cellular coverage to the cities of Delhi, Mumbai and Kolkata, evaluate to 190, 24 and
77; however, in the macrocellular layout, the same figures evaluate to 13250, 5388 and 1652 for
Delhi, Mumbai, and Kolkata, respectively. This is ascribed to the higher cellular radius achievable
under macrocellular BTSs functioning over lower frequency bands. Based on the cellular capacity
calculations, we highlight in Figure 5 and Figure 6, the effective number of BTSs required under
different demand scenarios. As can be inferred, 700 MHz-based macrocellular deployments will
enable a paradigm where the MNOs can do away with minimum network infrastructure deployment,
saving them crucial time which would otherwise be spent in the maintenance of their already existing
complicated networks. However, in use cases where the demand for mobile data is very high, a
combination of macro- and picocellular deployment would be more useful in providing seamless
service usage experience.
We can infer from Figure 4 and Figure 5, the temporal demand for the amount of radio network
infrastructure required during 2020-2030 under each deployment scenario considered. Comparing
the BTS demand for ensuring cellular capacity with that required for ensuring cellular coverage
(Table 4), we find that (i) the demand for infrastructure (BTSs) for ensuring cellular capacity is way
above that of cellular coverage for 700 MHz-based deployment, and (ii) much fewer infrastructure
(BTSs) is required for ensuring cellular capacity as compared to cellular coverage, for 30 GHz-
based deployment. This points to the unsustainable strategy of utilizing 30 GHz-based picocellular
infrastructure in a standalone manner, especially for cellular coverage purposes.
Figure 7 summarizes the CAPEX (during the project duration years 2020-2030) incurred by the
MNOs under both 4G LTE-Advanced and Massive MIMO-based 5G network deployment scenarios.
We can infer from Figure 6 that, the macrocellular layout based deployment are almost always
higher than picocellular deployments for all the cities. The highest amount of CAPEX – of the order
of 100 billion USDs for macrocellular and 250 million USD – is required in the city of Delhi. We
must note here that, these figures correspond to a very high quality of mobile broadband services
(referred to as the Enhanced Broadband services) having hyper-fast downlink data rate of the order
of 50 Mbps – 25 Gbps. Since such data rates would be a giant leap from the currently existing data
rate pertaining to the 4G LTE services, suitable business cases will have to be made therefore, for a
financially feasible investments in such 5G networks.
4. Conclusions
This paper conducts a thorough techno-economic assessment for possible 5G HetNet deployment
scenarios for the three Metros Telecom Circles of India, namely Delhi, Mumbai, and Kolkata, taking
into account the advanced air interface technologies of Massive MIMO operating at the mmWave
frequency of 30 GHz. The study utilizes a Bass model of diffusion-based demand forecast of 5G
subscription in India, for the 10-year horizon (2020-2030), for evaluating the aggregate network
infrastructure requirements for 5G and LTE-Advanced networks. These figures subsequently lead
to the evaluation of CAPEX, OPEX and TCO figures for each of these network technologies.
Assuming the diffusion of the mobility-centric 5G services to follow a similar approach to that of
the recently launched 4G Vo-LTE services in India, the study estimates the maximum subscription
to rise to 24 million, 15 million and 12 million subscribers, for the cities of Delhi, Mumbai and
Kolkata, respectively. The saturation of 5G services will likely begin by the year 2027 onwards.
The study also estimates the aggregate data volume demand in these cities to rise from 17 GB per
subscriber in the year 2020, to a staggering 1690 GB per subscriber in the year 2030. We find that,
for enabling full cellular coverage, much fewer network infrastructure would be required for the
case of 4G LTE-Advanced infrastructure using 700 MHz frequency as compared to the 5G Massive
MIMO over mmWave-based networks. However, the same is reverse when it comes to ensuring the
cellular capacity, which incorporates the impending demand for mobile data in the coming years.
Although in both the cases, the deployment of 5G infrastructure evaluates to a lower CAPEX, OPEX
and TCO. Therefore, we posit that standalone deployment of 5G services can ensure seamless mobile
broadband services in the wake of higher data demand of the consumers while also being financially
feasible, the legacy networks and the financial locking-in of the MNOs due to the presence of
such networks, would be a challenge the stakeholders would have to deal with in times to come.
The emphasis in future research works may, therefore, shift to achieving the optimal combination of
the “thick” high capacity radio network infrastructure deployments (for example, Massive MIMO
and mmWave frequencies- based 5G networks) with the “thin” high cellular coverage macrocellular
deployments (for example, lower frequencies-based 4G LTE-Advance networks), in order to both
reduce the costs as well as cater to the rising consumer demand.
References
Bouras, C., Kokkinos, V., Kollia, A. & Papazois, A. (2016). Techno-economic analysis of ultra-dense and DAS
deployments in mobile 5G. Proceedings of the International Symposium on Wireless Communication
Systems, 2016–April, 241–245. https://doi.org/10.1109/ISWCS.2015.7454337
Bouras, C., Kokkinos, V. & Papazois, A. (2014). Financing and Pricing Small Cells in Next-Generation Mobile
Networks. In Mellouk A., Fowler S., Hoceini S. & Daachi B. (Eds.), Mellouk A., Fowler S., Hoceini S.,
Daachi B. (eds) Wired/Wireless Internet Communications. WWIC 2014. Lecture Notes in Computer Science,
vol. 8458. (pp. 41–54). Springer, Cham. https://doi.org/10.1007/978-3-319-13174-0_4
Bouras, C., Kollia, A. & Papazois, A. (2016a). Dense Deployments and DAS in 5G: A Techno-Economic Comparison.
Wireless Personal Communications, 1–21. https://doi.org/10.1007/s11277-016-3711-0
Bouras, C., Kollia, A. & Papazois, A. (2016b). Sensitivity Analysis of Small Cells and DAS Techno-economic
Models in Mobile 5G. In IEEE Wireless Communications and Networking Conference (WCNC 2016)
(pp. 2742–2747). IEEE. https://doi.org/10.1109/WCNC.2016.7565168
Bouras, C., Ntarzanos, P. & Papazois, A. (2016). Cost Modeling for SDN / NFV Based Mobile 5G Networks. In 2016
8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops
(ICUMT) Cost (pp. 56–61). IEEE. https://doi.org/10.1109/ICUMT.2016.7765232
Division, U.N.P. (2016). The World Bank-Annual Population Growth Data.
EPRS. (2017). Opportunities and challenges of 5G in the EU. Retrieved from http://www.stoa.europarl.europa.eu/stoa/
cms/home/workshops/5G
Ericsson. (2016). Ericsson Mobility Report. https://doi.org/10.3103/S0005105510050031
FierceWireless. (2015). France sets €2.5B reserve price for 700 MHz auction | FierceWireless. Retrieved May 15, 2017,
from http://www.fiercewireless.com/europe/france-sets-eu2-5b-reserve-price-for-700-mhz-auction
Frank, L.D. (2004). An analysis of the effect of the economic situation on modeling and forecasting the diffusion of
wireless communications in Finland. Technological Forecasting and Social Change, 71(4), 391–403. https://
doi.org/10.1016/S0040-1625(02)00392-X
Gamboa, L.F. & Otero, J. (2009). An estimation of the pattern of diffusion of mobile phones: The case of Colombia.
Telecommunications Policy, 33(10–11), 611–620. https://doi.org/10.1016/j.telpol.2009.08.004
Gibbs, C. (2016). Verizon confirms XO spectrum in 28 GHz and 39 GHz bands will be used in 5G tests | FierceWireless.
Fierce Wireless. Retrieved from http://www.fiercewireless.com/wireless/verizon-confirms-xo-spectrum-28-
ghz-and-39-ghz-bands-will-be-used-5g-tests
GSMA Intelligence. (2014). Understanding 5G: Perspectives on future technological advancements in mobile. Retrieved
from https://www.gsmaintelligence.com/research/?file=141208-5g.pdf&download
Gupta, A. & Jha, R.K. (2015). A Survey of 5G Network: Architecture and Emerging Technologies. IEEE Access, 3,
1206–1232. https://doi.org/10.1109/ACCESS.2015.2461602
Hwang, J., Cho, Y. & Long, N.V. (2009). Investigation of factors affecting the diffusion of mobile telephone services:
An empirical analysis for Vietnam. Telecommunications Policy, 33(9), 534–543. https://doi.org/10.1016/j.
telpol.2009.06.003
Jha, A., Saha, D., 2018. Techno-Economic Analysis of 5G Deployment Scenarios involving Massive MIMO HetNets
over mmWave : A Case Study on the US State of Texas. 51st Hawaii Int. Conf. Syst. Sci. - HICSS 5839–
5848. https://doi.org/http://hdl.handle.net/10125/50621
Jha, A. & Saha, D. (2017). Why is 700 MHz band a Good Proposition for Provisioning pan-India 4G LTE Services ? In
9th International Conference on Communication Systems & Networks (pp. 1–8). Bangalore: IEEE.
Koski, H. & Kretschmer, T. (2005). Entry, standards and competition: Firm strategies and the diffusion of mobile
telephony. Review of Industrial Organization, 26(1), 89–113. https://doi.org/10.1007/s11151-004-4085-0
Lee, M. & Cho, Y. (2007). The diffusion of mobile telecommunications services in Korea. Applied Economics Letters,
14(7), 477–481. https://doi.org/10.1080/13504850500461431
Massini, S. (2004). The diffusion of mobile telephony in Italy and the UK: An empirical investigation. Economics of
Innovation & New Technology, 13(3), 251–277. https://doi.org/10.1080/10438590410001628396
Meade, N. & Islam, T. (1998). Technological Forecasting—Model Selection, Model Stability, and Combining Models.
Management Science, 44(8), 1115–1130. https://doi.org/10.1287/mnsc.44.8.1115
Nikolikj, V. & Janevski, T. (2014). Cost Modeling of Advanced Heterogeneous Wireless Networks under Excessive User
Demand. In Mellouk A., Fowler S., Hoceini S., Daachi B. (eds) Wired/Wireless Internet Communications.
WWIC 2014. Lecture Notes in Computer Science, vol 8458. (pp. 68–81). Springer, Cham. https://doi.
org/10.1007/978-3-319-13174-0_6
Nikolikj, V., Janevski, T. & Member, S. (2014). Profitability and Comparative Cost-Capacity Analysis of 5G Millimeter-
Wave Systems. In 22nd Telecommunications forum TELFOR 2014 (Vol. 7, pp. 256–259). IEEE.
Jürgen Poesche
Aalto University, Department of Industrial Engineering and Management
Maarintie 8, 02150 Espoo, Finland
E-mail: jurgen.poesche@aalto.fi
Ilkka Kauranen
Aalto University, Department of Industrial Engineering and Management
Maarintie 8, 02150 Espoo, Finland
E-mail: ilkka.kauranen@aalto.fi
Abstract
Sustainability is founded on the implicit assumption that the interaction of economic, environmental and social
considerations results in constructive solutions for human and Nature alike. To what degree does this implicit
assumption hold true? To ruminate on this issue the Trans Mountain Pipeline expansion project is used as a
case example. The detractors and proponents of the project effectively impute each other of pursuing a strategy of
destruction. Challenges are not only posed by the different worldviews espoused by various stakeholders, but also by
different interpretations and prioritizations of economic, environmental and social factors. For Rawlsian processes,
among them those used by the National Energy Board, designed to find reasonable compromises between stakeholders
the diverging worldviews represent a fatal blow. The purpose of this paper is to study the dynamics of the divergence
and radicalization of stakeholders in the Trans Mountain Pipeline expansion project permitting process, and to
formulate solutions. This paper relies on the case study approach. The paper is based on publicly available Federal
Court of Appeal, National Energy Board and other sources related to the Trans Mountain Pipeline expansion project
permitting process. This paper finds that divergence among the settler colonists epitomized by the radicalization of
the groups promoting the Trans Mountain Pipeline expansion project and the strengthening of the environmental
movement in association with decoloniality among First Nations make Rawlsian processes like the one used by the
National Energy Board unfeasible. This paper contributes to the understanding of the limits of Rawlsian processes
particularly in the context of coloniality and irreconcilable worldviews, and solutions are formulated.
Keywords: Coloniality; Radicalization; Rawlsian Processes; Sustainability
1. Introduction
The ground zero for the Canadian bitumen and oil extraction is in Alberta and Saskatchewan. The
bitumen and oil extraction sectors are of great interest to sustainability-related scholarship, because
these sectors are associated with economic, environmental and social conflicts along their value
chains. Because an assessment of the entire value chains would be prohibitively long, this paper
deals with the pipeline segment of the value chains. One reason for demands of construction of
diluted bitumen and oil pipelines has been that the crude oil price differential has increased between
Canada and the USA to the detriment of Canadian extractors. The price difference between the
West Texas Intermediate (WTI) and Western Canada Select (WCS) has resulted in calls for the
construction of diluted bitumen and oil pipelines (Tarnoczi, 2013). Increasing diluted bitumen and
oil pipeline capacity to allow for increased exports has been proposed, for instance, the expansion
of the Trans Mountain Pipeline to shipping ports in British Columbia and Keystone XL to the USA.
Moreover, limited diluted bitumen and oil pipeline capacity from Alberta and Saskatchewan to
Atlantic and Central Canada has been considered a hindrance to the aim of improving the country’s
energy security by means of replacing imported oil with domestic diluted bitumen and oil (Hughes,
2010).
Railways offer an alternative to pipelines. An advantage of railways over pipelines is that contrary to
the latter the former is not solely dedicated to one transportation need, in this case the transportation
of diluted bitumen and oil. Railway transportation is therefore conducive to product-based economic
diversification. Furthermore, the use of rail transportation is conducive to a flexible choice of markets
(Kaminski, 2014). A drawback is that the locomotives used by the main Canadian railway operators,
CNR and CPR, result in higher greenhouse gas, nitrous oxides and particulate emissions in diluted
bitumen and oil transportation than transportation by pipelines (Tarnoczi, 2013).
Sustainability-related assessment of the Alberta and Saskatchewan diluted bitumen and oil sectors
is rendered complicated because of the fragmentation of the permitting process. This creates an
incentive for segmented research. Instead of focusing on the entire extraction, upgrading and
transportation chain, some research has solely concentrated on the greenhouse gas emissions in
the transportation segment, as exemplified by Tarnoczi (2013). Bitumen extraction and upgrading
has been deemed inviable in the case of globally implemented greenhouse emission reduction
programs (Chan et al., 2012). Opposition against extraction may be hardened by the existing legal
issue in the Occident that those who destroy Nature in extraction and the subsequent value chain
do not pay for the damage (Salassa Boix, 2016). The fragmentation offers fuel for conflict, because
lowering transportation cost may be construed to provide an incentive for additional bitumen and oil
extraction. An analysis undertaken in Galay (2018) has come to the conclusion that a lowering of
transportation costs as the result of pipeline construction would increase capital investment in new
bitumen extraction capacity. The construction of diluted bitumen and oil pipelines has thence wider
implications for the different stakeholders. The purpose of this paper is to study the dynamics of
the divergence and radicalization of stakeholders in the Trans Mountain Pipeline expansion project
permitting process, and to formulate solutions.
2. Methodology
This paper relies on the case study approach. The paper is based on publicly available Federal
Court of Appeal, National Energy Board and other sources related to the Trans Mountain Pipeline
expansion project permitting process.
The oversimplification in the framing and the lack of debate can also be observed in the environmental
realm. The debate has been predicated on the assumption that the chemical and physical properties
of diluted bitumen are the same as those of (crude) oil. If this assumption does not hold, then the
framing and lack of debate has deluded a non-problem in the environmental realm.
Firms commencing corporate social responsibility and sustainability reporting can be seen as an
attempt to frame the debate. The bitumen and oil sectors have striven to gain legitimacy with the
adoption of the corporate social responsibility and sustainability concepts (Escobar and Vredenburg,
2011; Du and Vieira, 2012; Roeck and Delobbe, 2012; Comyns, 2016). It is doubtful that corporate
social responsibility and sustainability can be successful, if a firm is not perceived credible. Some
research casts doubts on the success chances: The extraction sector has lost its credibility vis-à-
vis human rights according to, for instance, Chandler (1998), Burgos Gonzáles (2006), Castillo
Meneses (2012), and Avellaneda Cusaría (2014). Human rights are a key component of corporate
responsibility and sustainability, of course.
4. Rule of Law
The Federal Court of Appeal (2018) has found: “The Government of Canada was required to engage
in a considered, meaningful two-way dialogue. However, for the most part, Canada’s representatives
limited their mandate to listening to and recording the concerns of the Indigenous applicants and
then transmitting those concerns to the decision-makers. On the whole, the record does not disclose
responsive, considered and meaningful dialogue coming back from Canada in response to the
concerns expressed by the Indigenous applicants. The law requires Canada to do more than receive
and record concerns and complaints.”
In Canada, key to jurisprudence by the Supreme Court of Canada regarding Indigenous rights is
Section 35 of the Constitution Act (1982). The claim underpinning Section 35 that Canada has
sovereignty over Indigenous peoples has been rejected in the Indigenous law literature, e.g., Bennett
(2005). Moreover, there has been a debate on Canadian courts’ need to and challenges in respecting
Indigenous laws, e.g., Ariss and Cutfeet (2011), Harland (2018), and Tousaw (2018). It may be
that Indigenous law and Occidental law are fundamentally incompatible (Christie, 2003; Ma’lingan,
2010). Canada is by no means an outlier increasingly respecting the rights of Indigenous American
nations. Indigenous rights have received increasing recognition in jurisprudence in the Americas
(Ríos Zamudio, 2011; Colmenares Olíver, 2015; Frizzo Bragato and Bigolin Neto, 2017; Fuenzalida
Bascuñán, 2017; Meza Salcedo, 2017; Pulzatto Peruzzo, 2017; Negrín Muñoz, 2018).
For this paper, the Federal Court of Appeal’s call for a “responsive, considered and meaningful
dialogue” is of interest. The specific case before the Federal Court of Appeal related to a project
of low-level technology and potentially high-level environmental damage. From the standpoint
of innovation, the legal principle cited by the Federal Court of Appeal raises the issue of a need
for firms to engage in innovation congruent with Indigenous American cultures and laws in the
coming years. Such a cultural-ethical diversification of the foundations of innovation is particularly
interesting, if a “responsive, considered and meaningful dialogue” is required for technologically
and scientifically ambitious projects.
Epistemologically, a cultural-ethical diversification is supported by Smith’s and High’s (2017)
argument that technology is a branch of philosophy instead of science. One outcome of a cultural-
ethical diversification could be technological innovation that would be better congruent with
sustainability.
5. Sustainability
Sustainability is founded on the implicit assumption that the interaction of economic, environmental
and social considerations results in constructive solutions for human and Nature alike. Safeguarding
that sustainability is respected in capital investment projects is left to government and ultimately
to the courts. Both administrative and legal proceedings contain participatory elements. Social
mobilization has been seen as valuable in the development and implementation of climate change
programs (Westerhoff et al., 2018), but this is contingent on meaningful participation. The legal
importance attributed to a “responsive, considered and meaningful dialogue” by the Federal Court
of Appeal underlines the quality of participation in administrative proceedings. Challenges are not
only posed by the different worldviews espoused by various stakeholders, but also by different
interpretations and prioritizations of economic, environmental and social factors (Gailus, Westman,
2013; Finch et al., 2015; Davidson et al., 2018; Dusyk et al., 2018). For Rawlsian processes (Rawls,
2001; Luetge et al., 2016), among them those used by the National Energy Board, designed to find
reasonable compromises between stakeholders the diverging worldviews represent a fatal blow.
Different worldviews can enter the process via two paths. First, different parties may have
fundamentally different weightings of economic, environmental and social considerations. A
securitization – described in Wilson (2019) as “the process by which a political group frames an issue
as an existential threat to political order” – of energy is not conducive to a meaningful participation.
Second, there may exist cultural and legal differences between the colonial state and Indigenous
American nations. The extraction sector is often perceived as colonialism (Reed, 2002). The result
may be that a credible “responsive, considered and meaningful dialogue” participatory process has
reached its limits. This points to the dark side of Rawlsian processes: An institutionalization of
cultural and epistemic racism. Cultural and epistemic racism has been addressed in, for instance,
Quijano (2006), and Mejías Sandia and Suárez Manrique (2017). By insisting on a “responsive,
considered and meaningful dialogue”, the Federal Court of Appeal recognizes the danger of
institutionalized racism in Rawlsian processes.
The Federal Court of Appeal focusses on the social dimension of sustainability. Because the
economic and environmental dimensions have dominated in the literature, the focus on the social
dimension recalibrates the respective weight of the economic, environmental and social dimensions
in innovation in the context of sustainability. It may also result in a recalibration in the weighting
between different natural resources, for instance, from bitumen and oil to geothermal energy.
The natural gas-related and oil-related knowledge could be used to take advantage of Alberta’s
geothermal heat resources (Leitch et al., 2019).
A recalibration of the societal power structures may cause resentment among those who have
benefitted from the status quo. Discouragement for fighting for unjust societal power structures
comes from a somewhat surprising corner: Referring to Niccolò Machiavelli, Cosans and Reina
(2018) have argued that goodwill is a more solid foundation than power.
The Federal Court of Appeal called for a “responsive, considered and meaningful dialogue” with the
affected First Nations. Because a “responsive, considered and meaningful dialogue” is beneficial for
innovation and sustainability, the courts should consider broadening this requirement to encompass
society at large. Jurisprudence plays a constructive role in encouraging innovation and discouraging
destruction.
References
Ariss, R. and Cutfeet, J. (2011). Kitchenuhmaykoosib Inninuwug First Nation: Mining, Consultation, Reconciliation and
Law. Indigenous Law Journal, Vol. 10, No. 1, pp. 1-38.
Avellaneda Cusaría, A. (2014). Petróleo sin gente, una estrategia que es necesario modificar dentro de un estado social
de derecho. Revista de Ingeniería, No. 40, pp. 57-62.
Bennett, M. (2005). “Indigeneity” as Self-Determination. Indigenous Law Journal, Vol. 4, No. 1, pp. 71-115.
Burgos Gonzáles, A. (2006). Petróleo e indígenas en Colombia: Una mirada desde la seguridad humana. Desafíos, Vol.
15, pp. 389-418.
Castillo Meneses, Y. (2012). El rol de la empresa transnacional extractiva de petróleo en la consulta previa con las
comunidades indígenas: La experiencia en Colombia. Revista de Derecho, No. 37, pp. 1-35.
Chan, G., Reilly, J., Paltsev, S. and Chen, Y. H. H. (2012). The Canadian Oil Sands Industry under Carbon Constraints.
Energy Policy, Vol. 50, pp. 540-550.
Chandler, G. (1998). Oil Companies and Human Rights. Business Ethics: A European Review, Vol. 7, No. 2, pp. 69-72.
Christie, G. (2003). Law, Theory and Aboriginal Peoples. Indigenous Law Journal, Vol. 2, No. 1, pp. 67-115.
Colmenares Olíver, R. (2015). Derecho de los pueblos indígenas en el Sistema Interamericano. Cuestiones Jurídicas,
Vol. 9, No. 2, pp. 29-59.
Comyns, B. (2016). Determinants of GHG Reporting: An Analysis of Global Oil and Gas Companies. Journal of
Business Ethics, Vol. 136, No. 2, pp. 349-369.
Cosans, C. and Reina, C. (2018). The Leadership Ethics of Machiavelli’s Prince. Business Ethics Quarterly, Vol. 28,
No. 3, pp. 275-300.
Davidson, D. J., Edou, E. A. and Robinson, B. (2018). Chipping Away at Democracy: Legislative Slippage in Alberta’s
Energy Development Zone. Energy Research & Social Science, Vol. 46, pp. 303-310.
Du, S. and Vieira, E. (2012). Striving for Legitimacy through Corporate Social Responsibility: Insights from Oil
Companies. Journal of Business Ethics, Vol. 110, No. 4, pp. 413-427.
Dusyk, N., Axsen, J. And Dullemond, K. (2018). Who Cares About Climate Change? The Mass Media and SocioPolitical
Acceptance of Canada’s Oil Sands and Northern Gateway Pipeline. Energy Research & Social Science, Vol.
37, pp. 12-21.
Escobar, L. and Vredenburg, H. (2011). Multinational Oil Companies and the Adoption of Sustainable Development:
A Resource-Based and Institutional Theory Interpretation of Adoption Heterogeneity. Journal of Business
Ethics, Vol. 98, No. 1, pp. 39-65.
Federal Court of Appeal (2018). TsleilWaututh Nation et al. v. Attorney General of Canada et al., 2018 FCA 153.
Federal Court of Appeal, Ottawa, Ontario, Canada.
Finch, D., Deephouse, D. and Varella, P. (2015). Examining an Individual’s Legitimacy Judgment Using the Value
Attitude System. Journal of Business Ethics, Vol. 127, No. 2, pp. 265-281.
Frizzo Bragato, F. and Bigolin Neto, P. (2017). Conflitos territoriais indígenas no Brasil: Entre risco e prevenção.
Revista Direito e Práxis, Vol. 8, No. 1, pp. 156-195.
Fuenzalida Bascuñán, Sergio (2017). La función administrative discrecional y la consulta indígena. Revista de Derecho
- Universidad Católica del Norte, Vol. 24, No. 2, pp. 181-210.
Gailus, J. (2012). An Act of Deception. Alternatives Journal, Vol. 38, No. 5, pp. 12-17.
Galay, G. (2018). The Impact of Spatial Price Differences on Oil Sands Investments. Energy Economics, Vol. 69, pp.
170-184.
Harland, F. (2018). Taking the “Aboriginal Perspective” Seriously: The (Mis)use of Indigenous Law in Tsilhqot’in
Nation v British Columbia. Indigenous Law Journal, Vol. 16/17, No. 1, pp. 21-50.
Hughes, L. (2010). Eastern Canadian Crude Oil Supply and Its Implications for Regional Energy Security. Energy
Policy, Vol. 38, No. 6, June 2010, pp. 2692-2699.
Kaminski, V. (2014). The Microstructure of the North American Oil Market. Energy Economics, Vol. 46, pp. S1-S10.
Kolk, A. and Curran, L. (2017). Contesting a Place in the Sun: On Ideologies in Foreign Markets and Liabilities of
Origin. Journal of Business Ethics, Vol. 142, No. 4, pp. 697-717.
Leitch, A., Haley, B. and Hastings-Simon, S. (2019). Can the Oil and Gas Sector Enable Geothermal Technologies?
Socio-technical Opportunities and Complementarity Failures in Alberta, Canada. Energy Policy, Vol. 125,
pp. 384395.
Luetge, C., Armbrüster, T. and Müller, J. (2016). Order Ethics: Bridging the Gap between Contractarianism and Business
Ethics. Journal of Business Ethics, Vol. 136, No. 4, pp. 687-697.
Ma’lingan, W. (2010). Aki, Anishnaabek, kaye tahsh Crown. Indigenous Law Journal, Vol. 9, No. 1, pp. 107-166.
Mejías Sandia, C. and Suárez Manrique, P. (2017). Configurando nuevos movimientos sociales Latinoamericanos en
el espacio del resquebrajamiento epistémico-colonial neoliberal. Revista Reflexiones, Vol. 96, No. 1, pp.
97-108.
Meza Salcedo, G. (2017). Ética de la investigación desde el pensamiento indígena: derechos colectivos y el principio de
la comunalidad. Revista de Bioética y Derecho, No. 41, pp. 141-159.
Murphy, Raymond (2015). The Media Construction of Climate Change Quiescence: Veiling the Visibility of a Super
Emitter. Canadian Journal of Sociology, Vol. 40, No. 3, pp. 331-354.
Negrín Muñoz, E. (2018). Violación del derecho a la consulta indígena: siembra de soya transgénica en comunidades
mayas del estado de Campeche, México. RICSH Revista Iberoamericana de las Ciencias Sociales y
Humanísticas, Vol. 7, No. 13, pp. 51-71.
Pulzatto Peruzzo, P. (2017). Direito à consulta prévia aos povos indígenas no Brasil. Revista Direito e Práxis, Vol. 8,
No. 4, pp. 1-33.
Quijano, A. (2006). El «movimiento indígena» y las cuestiones pendientes en América Latina. Argumentos, Vol. 19,
No. 50, pp. 51-77.
Rawls, J. (2001). Justice as Fairness. Belknap, Cambridge, Massachusetts, USA.
Reed, D. (2002). Resource Extraction Industries in Developing Countries. Journal of Business Ethics, Vol. 39, No. 3,
pp. 199-226.
Ríos Zamudio, J. (2011). Justicia indígena maya en el sureste de México. Revista de Derecho, No. 35, pp. 180-219.
Roeck, K. and Delobbe, N. (2012). Do Environmental CSR Initiatives Serve Organizations’ Legitimacy in the Oil
Industry? Exploring Employees’ Reactions through Organizational Identification Theory. Journal of
Business Ethics, Vol. 110, No. 4, pp. 397-412.
Salassa Boix, R. (2016). Fiscalidad y petróleo: un análisis tributarioambiental a partir de gravámenes concretos. Revista
de Derecho, No. 45, pp. 262-293.
Smith, J., High, M. (2017). Exploring the Anthropology of Energy: Ethnography, Energy and Ethics. Energy Research
& Social Science, Vol. 30, pp. 1-6.
Tarnoczi, Tyler (2013). Life Cycle Energy and Greenhouse Gas Emissions from Transportation of Canadian Oil Sands
to Future Markets. Energy Policy, Vol. 62, pp. 107-117.
Tousaw, J. (2018). Meeting Halfway: Reassessing “Cognizable to the Canadian Legal and Constitutional Structure”.
Indigenous Law Journal, Vol. 16/17, No. 1, pp. 85-129.
Westerhoff, L., Sheppard, S., Iype, D., Cote, S. and Salter, J (2018). Social Mobilization on Climate Change and Energy:
An Evaluation of Research Projects in British Columbia, Canada. Energy Research & Social Science, Vol.
46, pp. 368-380.
Westman, C. (2013). Cautionary Tales: Making and Breaking Community in the Oil Sands Region. Canadian Journal of
Sociology, Vol. 38, No. 2, pp. 211-231.
Wilson, J. (2019). A Securitisation Approach to International Energy Politics. Energy Research & Social Science, Vol.
49, pp. 114-125.
Daniel Röltgen
Fraunhofer Institute for Mechatronic Systems Design,
Product Engineering, Germany
E-mail: roeltgen@iem.fraunhofer.de
Fabio Wortmann
Fraunhofer Institute for Mechatronic Systems Design,
Product Engineering, Germany
E-mail: wortmann@iem.fraunhofer.de
Eva-Maria Grote
Fraunhofer Institute for Mechatronic Systems Design,
Product Engineering, Germany
E-mail: eva-maria.grote@iem.fraunhofer.de
Roman Dumitrescu
Fraunhofer Institute for Mechatronic Systems Design,
Product Engineering, Germany
E-mail: dumitrescu@iem.fraunhofer.de
Abstract
Almost all sectors of the manufacturing industry are affected by a shift in which the traditional product portfolio
is being replaced by highly integrated product service systems. This shift – also referred to as “servitization
in manufacturing” – is accelerated by innovation potentials that arise from the progress of digitally enabled
technologies. A technology with a considerable potential for the digital refinement of the product service business
is Augmented Reality (AR). It enables real-world environments to be enriched with additional virtual content. For
example, repair instructions can be visualized as a 3D animation superimposed on a physical machine, enabling
service technicians to carry out complex tasks more time and cost efficiently.
However, the integration of AR into the product service portfolio requires adjustments to the business model:
(1) Companies have to identify promising use cases for AR that create value for the customer, thereby defining
the value proposition of the business model. (2) The identified use cases need to be translated into products and
services, integrated into the existing product service portfolio. (3) Promising business models have to be designed,
taking into account the technology-specific challenges posed by AR (e.g. ensuring user acceptance, finding revenue
models to cover the investment costs for AR devices). Despite the large variety of potential AR applications,
business models successfully exploiting AR are still the exception, indicating that the development of sustainable
business models is a significant challenge. With this in mind, in this paper, we present an approach for designing
business models for AR.
The approach consists of a procedure model providing step-by-step instructions on how to develop business models
for AR and additional tools (e.g. catalogue with AR use cases, business model cards), that help to tackle the
technology-specific challenges caused by AR. It combines a methodical procedure with technology-specific solution
knowledge, allowing companies to utilize the benefits of AR for their product service business. The approach is
described using an industrial use case from the joint research project “AcRoSS – Instruments for the Implementation
of AR-based Product Service Systems” in which the use of AR is analysed for supporting repair processes in the
machine and plant engineering industry.
Keywords: Business Model; Augmented Reality; Product Service System; Servitization
1. Introduction
The product portfolio of manufacturing companies is undergoing a change: the traditional business
focused on the manufacture and sale of products is being replaced by hybrid system solutions, so-
called product service systems (PSS), which combine product and service components (Aurich et
al., 2007), (Tukker and Tischner, 2006). This paradigm shift is also referred to as Servitization in
Manufacturing (Herterich et al., 2015) and reflects the economic transformation to a service society
at the corporate level. The reasons for this change are manifold. Due to the increasing quality of
competing products, differentiation from competition can only rarely be achieved by product quality
alone (Li et al., 2016). Further strategic motivations for the product service business are higher profit
contributions and customer loyalty (Schuh et al., 2016). Thus, the transition from product-oriented
to service-oriented thinking is becoming increasingly important for companies. The term service
dominant logic, which has been intensively discussed in marketing theory in recent years, expresses
this new mindset (Vargo and Lusch, 2004), (Vargo and Lusch, 2006).
Figure 1: Example for the use of AR for supporting the repair process of a plant
The enormous potential of AR is also reflected in current market forecasts for AR. For the year
2022, a market volume of US$ 90 billion is expected, which corresponds to an increase by a factor
of nearly 500 compared to US$ 181 million in 2011 (Digi-Capital, 2018a). Based on the figures,
the enterprise sector will account for an increasing share of the revenues, with the use of AR in the
product service business being the most important driver as a recent survey by PTC implies (Porter
and Heppelmann, 2017). By enhancing products with additional AR-based services, companies can
generate additional customer benefits, increase the quality and efficiency of manual tasks and thus,
differentiate themselves from competition (Porcelli et al., 2013).
covers four partial models: offer, customer, infrastructure as well as finances, which represent the
main areas of a business (Osterwalder and Pigneur, 2010). Each partial model in turn comprises
several business model elements that describe specific aspects of the business activity (e.g. customer
segment, value proposition as well as products and services as part of the partial model offering).
Despite the numerous advantages that AR offers, the number of companies that have successfully
integrated AR into their business model is limited so far, indicating that the development of
sustainable business models for AR is a significant challenge for companies (van Kleef et al., 2010).
As shown in Figure 2, the main challenges can be divided into three groups.
Technology-specific challenges of AR
Defining the value proposition: As the definition of Osterwalder and Pigneur shows, value is the
pivotal point in a business model. For AR, this means identifying use cases that create value for the
customer and translating them into new products and services. Missing experiences and empirical
values as well as a lack of transparency about the benefits of AR makes it difficult for companies to
weigh the impact of AR for the existing product service business. The significance of this challenge
is illustrated by a survey conducted by DigiCapital (2018a, 2018b), according to which critical use
cases as well as new products and services are seen by respondents as the most important prerequisite
for a scalable business model.
Interdependencies with the product service system: The integration of AR functionalities usually
requires modifications to existing products and services. For example, it might be necessary to
add new components to the product (e.g. visual marker for tracking) or change service processes
(e.g. customers doing self-service). It is especially important to consider the technology-specific
requirements of AR, which can be divided into technological constraints (e.g. limited capabilities
of mobile AR devices) and environmental dependencies (e.g. appropriate light conditions for
the AR device to calculate its position and orientation) (Craig, 2013). While on the one hand the
characteristics of the product service system result in requirements on the business model (e.g. new
key resources that are required), on the other hand the available business options might end up in
limitations for the product service design (e.g. lacking competencies, cost restrictions). For this
reason, business model design must be closely interlinked with the product service system design
(Barquet et al., 2011), (Köster, 2014).
Technology-specific challenges of AR: Companies trying to implement AR into their business model
are faced with technology-specific challenges that have to be considered at an early stage (Kipper
and Rampolla, 2013). For example, since the use of AR is not yet established in the industrial sector,
the majority of customers do not have dedicated AR devices (e.g. smart glasses) which are however
necessary to enable AR visualizations. Considering the significant acquisition costs for AR devices
(handhelds: 500-1,000 €; smart glasses: 1,500-3,000 €), companies must find ways to compensate
for the high initial investments in the business model (e.g. by providing AR devices for a monthly
usage fee). Other challenges besides this example include ensuring user acceptance, providing the
necessary AR content and dealing with the technological dynamics in the market for AR (Craig,
2013), (Schmalstieg and Höllerer, 2016).
The challenges outlined above illustrate the need for methodological support in designing business
models for AR. With this in mind, the following section analyses the state of the art.
To ensure a better understanding, the approach is illustrated and has been successfully validated by
applying to an industrial case study from the current joint research project “AcRoSS – Instruments for
the Implementation of AR-based Product Service Systems”, which is funded by the German Federal
Ministry for Economic Affairs and Energy. Within the project, AR is analysed for improving the
product-service business of a small-sized German mechanical engineering company that provides
solutions for the printing process of newspapers and magazines.
Marketing
Inbound Outbound
Operations & Service
… Logistics Logistics
Sales …
Figure 4: AR use cases assigned to the value chain, based on Porter (1985), Röltgen et al. (2017)
In order to create transparency about the potential benefits, each use case is described in a use case
profile. Figure 5 shows an example of a profile for the use case “AR-enhanced repair instructions”.
The profiles contain a brief summary of the use case, examples of best practices and a detailed
description of the benefits from both the customer’s and provider’s point of view. Based on an
analysis of the identified application scenarios, 12 generic potential benefits resulting from the use of
AR were identified, which in turn are divided into three categories: time, quality and communication.
In the category time, benefits are summarized that result in time savings because of AR use (e.g.
faster response time, elimination of activities). The category quality covers benefits, which cause an
increase in quality (e.g. improved error prevention, error detection). The category communication
includes benefits that have a positive effect on communication and the exchange of information (e.g.
avoiding misunderstandings, visualising potential hazards). For each use case, an evaluation of the
potential benefits for customer and supplier is given on a scale from 0 (no benefit) to 3 (high benefit).
In the following, the AR profiles are used to support the development of the value proposition.
Brief description:
The repair process for a technical plant can be supported by AR-enhanced
instructions. This can be done, for example, on the basis of known error codes.
The customer is shown step-by-step instructions and can therefore carry out
repair procedures himself (self-service).
Evaluation
Potential benefits (from the customer‘s and provider‘s perspective)
Customer Provider not low medium high
0 1 2 3
Faster response time
Elimination of activities
Avoidance of misunderstandings
Communi-
The first step is an analysis of customer needs. This involves examining the extent to which the
existing product service portfolio meets the needs of customers within a specific business segment.
Starting point is a product-market matrix according to Gausemeier and Plass (2014), in which the
relevant market segments are assigned to the company’s products and services. Within the matrix,
(main) business areas are to be identified. Depending on the strategic objectives, a business area is
to be selected in which the needs of the customers are to be analyzed more closely. In the validation
example, the main business area “newspaper printing” was selected in order to strengthen the
company’s position as a technology leader with additional AR-based services and thereby gain
competitive advantages.
For the analysis of customer needs within the selected business segment, a Value Proposition Canvas
according to Osterwalder et al. (2014) is used. As shown in Figure 6, the Value Proposition Canvas
consists of two sides, the value map (left side) and the customer profile (right side). Within the
customer profile, the jobs of the customer are analyzed, as well as pains and gains that are related
to the jobs, in order to clarify customer understanding. The value map, on the other hand, specifies
characteristics of the value proposition, by analyzing the contribution of products and services
the company offers to relieve customer’s pains (pain reliever) and create gains (gain creators). By
comparing the customer profile with the value map, unsatisfied customer needs can be discovered,
i.e. pains and gains that have not or only insufficiently been addressed by the products and services
currently offered by the company. The unsatisfied customer needs reflect the company’s need for
action and should be aimed at when identifying AR use cases.
Figure 6: Analysis of customer needs within a business segment with a Value Proposition Canvas
The identification of AR use cases is based on a comparison of the previously determined unsatisfied
customer needs with the 12 generic potential benefits from the AR use case profiles. As shown in
Figure 7, the comparison can be done by using a matrix. By comparing in pairs, it is evaluated to
what extent a potential benefit (row) is suited to satisfy a customer need (column). The evaluation is
done on a scale from 0 (= potential benefit does not satisfy customer need) to 3 (= potential benefit
satisfies customer need completely). By using an example from the case study, the potential benefit
“faster response time” is well suited to cover the customer need “plant must not fail for longer time“,
whereas the potential benefit “improved communicability of potential hazards” does not affect this
customer need.
In the matrix, line sums can be calculated that indicate how suitable a potential benefit is to meet
the overall unsatisfied customer needs, thus representing its importance. Since each AR use case
profile contains a characteristic specification of the potential benefits, suitable AR use cases can
now be identified based on the results from the matrix. For this purpose, a weighted-point evaluation
(benefit analysis) of the AR use cases is carried out, as shown in Figure 8. The weights are based
on the line sums, whereas the scores, which are multiplied by the weights, are taken from the AR
use case profiles. By summing up the weighted points, a score is determined for each use case that
reflects the specific customer benefit. In addition, the provider benefit and the implementation effort
for each use case are evaluated. For the provider benefit, the evaluation is carried out analogously
to the procedure described above, with the benefit profiles from the provider’s point of view being
used. The calculation of the implementation effort for each use case is based on a list of criteria
described in more detail by Röltgen et al. (2017). For more clarity, it is advisable to transfer the
results to a portfolio, with the customer benefit on the ordinate, the implementation effort on the
abscissa and the provider benefit depcited by the sphere size.
Figure 8: Assessment of the AR use Cases Regarding Benefits and Implementation Effort
In general, we recommend the selection of use cases that are characterized by a high customer
and provider benefit as well as a low implementation effort. However, experience from projects
shows that use cases with at least two evaluation dimensions that are medium to high should also be
considered more closely. This applies in particular to use cases, which have a high customer benefit,
as for those the customer’s willingness to pay may outweigh the implementation effort. With an AR
use case selected, the value proposition is largely determined based on the specific benefit profile
of the selected use case. However, it is advisable to further specify the benefits from the use case
profile in terms of the particular case at hand (e.g. specifying what the faster response time refers to).
The results for the case study are illustrated in Figure 8, showing that providing an AR-enhanced
repair service for so-called Computer-to-Plate (CtP) systems seems promising, which are used in
the printing process of newspapers and magazines. Especially with daily newspapers, the printing
process takes place late in the evening in a very short time frame, in order to be able to integrate
as much information as possible into the next issue. This reduces the time available for action if
problems occur during the printing process (e.g. machine errors). By offering an AR-enhanced
repair service, the provider of CtP systems could enable the customer to carry out repair procedures
by themselves, resulting in benefits for both the customer and supplier. From the point of view of
the customer, machines are repaired more quickly, decreasing unprofitable downtimes, whereas the
provider benefits from cost savings due to an increasing availability of service technicians.
technique for Engineering of complex Systems) (Gausemeier et al., 2018). As shown in Figure 9,
it contains eight partial models that are closely related to each other, thus enabling transparency
with respect to interdependencies. Since in most cases AR functionalities will be added to either an
existing product (e.g. machine) or a product service system (e.g. machine with conventional repair
service), the following procedure is based on the assumption that a system model of the existing
product service system is available. Therefore, particular emphasis is placed on the analysis of
adaption needs that result from integrating AR functionalities to the existing products and services.
For methodological support, additional guiding questions are attached to the partial models to help
consider technology-specific requirements of AR.
Functions
Products & Services Resources Key Partnerships
Synthesis
Figure 9: Model-based description of the product service system in the Business Model Canvas
In the following, the partial models are briefly described in a reasonable sequence according to
which they should be implemented, for further information see (Röltgen et al., 2018). The sequence
can be divided into two phases, analysis and synthesis.
7.1. Analysis
The integration of AR functionalities usually results in changes in the user’s interaction with the
physical product. For this reason, it is recommended to start with the partial model application
scenarios, in which characteristic situations of the system and its desired behaviour are specified.
Usually, application scenarios cover the entire life cycle, e.g. from installation at the customer’s site
to actual operation, repair and disposal. According to the selected AR use case, modifications to the
application scenarios need to be implemented. In the case study, for example, the application scenario
“repairing the CtP machine” needed to be changed, since the repair process is now conducted by the
customer.
In the partial model environment, the system environment and its effects on the system are analyzed.
The system is considered as a “black box”. Elements from the environment that are related to the
system are identified and the interactions described as either information, energy or material flows.
Considering the strong interdependencies between AR and environmental influences (e.g. light
conditions, temperature, ambient sounds), the analysis of the environment is of crucial importance.
Based on the existing environment model of the product, new environmental elements and their
influences are added that need to be considered due to the integration of AR. In the case study,
the analysis of the environment revealed, for example, that the light conditions when repairing
the machine (usually dimmed yellow light to prevent exposure of the printing plates) have to be
improved.
In the partial model requirements, based on the application scenarios and the environment model,
requirements are derived. They are collected in a list of requirements that includes the original
requirements of the existing product service system as well as those that result from adaptation needs.
A distinction is made between product-related requirements (e.g. transferring error codes from the
machine to the AR device), service-related requirements (e.g. ensuring that the customer can contact
a service technician if the repair process has not been successful), and AR-related requirements (e.g.
interaction via voice user interface).
Based on the list of requirements, functions of the product service system are derived, distinguishing
between product- and service-related functions. The term function refers to the relationship between
input and output parameters in order to fulfil a specific task. Functions are usually described as a
combination of noun and verb (e.g. transfer error codes) and are hierarchically ordered in a function
structure. For analysing changes that occur due to the integration of AR, the function structure of
the existing product service system is used. New functions that are relevant for the usage of AR are
added and marked accordingly.
7.2. Synthesis
The functional structure is the main link between the analysis and synthesis phase. With the help
of additional tools such as the morphological matrix by Zwicky (1949), solutions for fulfilling
the functions are identified (e.g. Bluetooth module for transferring error codes from the machine
to the AR device). According to principles of systems thinking, solutions can be considered as
system elements, being a discrete part of a system, which can be implemented to fulfil specified
requirements (Arnold, 2002). In the partial model active structure, the system architecture of the
physical product is defined by combining the system elements and specifying their relations amongst
each other (material, energy and information flows, and logical relations). In the context of this
paper, we use the active structure to analyse and incorporate adjustments that need to be made to
the physical product due to the integration of AR. These are usually based on new product-related
functions that have been added to the function structure. For example, in the case study an optical
marker as well as an artificial light source had to be added to the CtP machine to support the tracking
of the AR device.
The active structure provides only a static view on the system. In the partial model behaviour, the
behaviour of the system is specified in terms of states, state transitions and events that initiate state
transitions. In the context of integrating AR functionalities, the behaviour model is used to describe
the interactions between the product and the AR device. In the case study, for example, the machines
transfers information on the error code to the AR device, which in turn automatically suggests
suitable repair instructions to the user.
Analogous to the procedure for transferring product-related functions to system elements, in the
partial model process the service-relevant functions are translated into process steps of the service.
For decribing the process model, we use a Service Blueprint (Shostack, 1984), which differentiates
between activities done by the customer and the service provider and whether the activities are
visible or invisible from a customer’s point of view. As shown in Figure 10, it further allows to
illustrate AR-relevant activities directly related to the use of an AR device (e.g. switch on AR device,
follow AR instructions). In case an existing service is to be enhanced by AR, it is recommended
to use the existing process model as a starting point and adjust it. Otherwise, the process has to be
defined from scratch. The process model for the case study is shown in Figure 10 and was derived
from an existing process model for a conventional repair service.
Switch machine
Customer activities
Confirm
to operating
message
mode
Customer
Repair
successful?
activities
AR Switch on AR- Follow AR Confirm
Report an error
system instructions successful repair
Visible
Line of Interaction
activities
service
technician
Competence profile
Kompetenzprofil
Line of Visibility
Competence Scale Competence Scale
low 1 2 3 4 high low 1 2 3 4 high
Backstage-
Backstage
aktivitäten
activities
Analyzing data
Record repair Set up service
(time, repetition
case case
Fine motor skills Adaptability and continuous learning
of steps)
Closely related to the process model is the partial model resources that assigns relevant resources
to the activities of the process model. Besides tangible resources such as equipment, also intangible
resources (e.g. skills, knowledge) should be taken into account. With this in mind, we use profiles
to specify the tools and personnel that are required and attach them to the activities in the process
model, as depicted in Figure 10. In the context of AR, adjustments will often affect both tools (e.g.
AR devices that are required) as well as personnel (e.g. new stakeholders that are involved). Since
AR-based services often require new skills (e.g. using the AR device), it is important to compare
the existing and required competencies in a chart, as part of the personnel profile, and analyse the
resulting shift that is needed (see Figure 10). In the case study, selected skills of the McKinsey
Global Institute workforce skill model (Bughin et al., 2018) were used to analyse the competencies.
Since with the AR-enhanced repair service customers should be enabled to carry out repair processes
by themselves, new skills in terms of handling the AR device (basic digital skills) as well as fine
motor skills are required.
With the eight partial models adjusted to the needs of AR, the product service system is holistically
specified. As the results from the case study show, the partial models also provide valuable
information for detailing the Business Model Canvas (e.g. required skills from the personnel profile
as input for the business model element “key resources”) which we will focus on in the next section.
Uncertainty concerning
Limited availability Effort for providing Uncertainty in Economic provision the customer's
of model data AR content choosing partner of AR devices willingness to pay
Uncertainty concerning user acceptance: AR applications result in many changes for the user due to
the limited prevalence so far. Especially smart glasses are a novel device category, the use of which
must be learned (e.g. gesture recognition of Microsoft HoloLens). In particular, the user guidance
and presentation in AR are new to many users, which is why operation must be intuitive. Some
application scenarios also require the user to be willing to take on new tasks, in the case study, for
example, repairing CtP machines. For this reason, it is important to think about ways on how to
ensure user acceptance.
Dependency on the customer’s operational environment: If AR is offered as part of a product
service system, the operational environment of the AR application is usually outside of the
provider’s company (e.g. at the customer’s site). In many cases, the operational environment differs
from customer to customer and can only be influenced to a limited extent. On the other hand, the
environmental influences have a significant effect on the proper functioning of the AR application
(e.g. lighting conditions for tracking, Internet connection).
Compliance to legal regulations: The use of AR raises new legal issues, for example concerning
information security, employee safety and liability. However, not all questions have yet been
clarified by jurisdiction. In order to avoid lawsuits, conformity with existing national and
international regulations have to be ensured (e.g. general data protection regulation, principle of data
minimisation). In the case study, in particular, questions regarding liability must be clarified in case
the customer causes damage to the machine during repair.
Uncertainty in selecting AR technologies: The market for AR technologies (e.g. AR devices,
platforms) is highly dynamic: Due to technical progress, there is a risk that these technologies will
quickly become outdated (e.g. performance, ergonomics) or are no longer supported (e.g. Tango from
Google). In order to deliver a striking customer experience and to remain successful in competition,
it is crucial to keep pace with technological development. This results in uncertainties regarding the
choice of AR technologies and the time of investment.
Lacking competencies: By offering AR-based services, new competencies are needed. Among
others, these include the development, testing and maintenance of the AR application; conception,
development and administration of the required IT infrastructure; operation and use of the AR
application; commercialization of the AR-based service through marketing and sales; after-sales
support for the customer (e.g. hotline). It has to be decided whether competencies should be built
up or outsourced.
Limited availability of model data: AR use cases usually require 3D models specially prepared
for visualization by AR (e.g. in formats such as .fbx, .obj, .stp). However, if the vertical range of
manufacture is low, 3D models are often held by the supplier and are not or not in the latest version
accessible.
Effort for providing AR content: A central component of an AR application is the content (e.g. 3D
models, instructions), which must be kept up-to-date and consistent with the specific configuration
of the product at the customer’s site (e.g. machine). The effort for creating content and the frequency
for necessary updates can be very high, depending on the AR use case (e.g. repair instructions) and
company-specific factors (e.g. complexity of repairs, number of product variants).
Uncertainty in choosing partners: The market for AR applications offered by software providers is
highly dynamic and fragmented. Hardly any solutions have established themselves as standards,
instead there is often a co-existence of numerous, almost equivalent offers for a certain use case (e.g.
AR-enabled remote assistance). In addition, many start-ups are entering the market whose continued
existence is uncertain (e.g. lack of support due to bankruptcy or acquisition). In addition, software
providers try to bind companies to their products (vendor lock-in). For companies, the selection of
partners is therefore associated with a high degree of uncertainty.
Economic provision of AR devices: For the use of an AR application, AR devices are required.
Since the use of AR is not yet widespread in the industrial sector, the majority of customers do
not own dedicated AR devices (especially smart glasses). The purchase proves to be very cost-
intensive (handhelds: 500-1,000 €; smart glasses: 1,500-3,000 €), since the scaling is generally poor,
considering an AR display device is mandatory for using an AR application.
Uncertainty concerning the customer’s willingness to pay: AR-enhanced services are often based
on an existing service for which the customer is paying a price (e.g. conventional repair service).
For AR-based services to be profitable, higher costs resulting from AR must be covered by higher
revenues or cost savings. Due to the novelty and a lack of experience with AR, there may be
reservations from the customer to pay a higher price than for the existing service, especially since
the added value of AR is currently difficult to quantify in monetary terms.
As shown in Figure 12, each technology-specific challenge is described in a profile, a so-called
business model card. It contains a brief description of the challenge as well as a related key question
to which an answer needs to be found in the course of business model development in order to solve
the challenge. Furthermore, the business model card includes exemplary solutions that might be
suited to address the challenge. For example, to reduce the high initial investments for AR devices,
customers can be given the opportunity to use their own devices. In the case study, this solution
concept, also referred to as “bring your own device”, was implemented in the business model, using
tablets for the AR applications that are already attached to the CtP machines as a human-machine
interface.
Figure 12: Business Model Cards to Support the Design of Business Models for AR
The business model cards serve as a tool for detailing the Business Model Canvas. As shown in
Figure 12, the business model element to which the business model card refers to is noted in the upper
right corner. Experiences from the research project AcRoSS show that the business model cards are
a suitable tool for supporting business model workshops. From our experience, it is recommended to
first create an initial draft for the Business Model Canvas in an interdisciplinary team, utilizing the
creative energies of the team members, and then refine it with the help of the business model cards.
In this way, risks of the initial business model draft are reduced and often new ideas emerge resulting
in additional business model variants.
2 Variant 1: Develop
1
everything yourself
3 Variant 2: Buy the
2
software, do the content
Variant 3: Outsource
3
everything
Figure 13: Portfolio showing the result of the business model assessment
10. Conclusion
Augmented reality will fundamentally change the way people interact with virtual information.
These changes will not only affect everyday life, but also the industrial value creation. The
potential benefits associated with the use of AR, such as increased efficiency and cost savings,
open up innovation impulses for the product service business and thus enable companies to achieve
competitive advantages. In the paper at hand, we introduced an approach that supports companies
in (i) analysing the potentials of AR for their own product service portfolio, (ii) translating these
potentials into products and services and (iii) developing a sustainable business model. The value
added compared to existing approaches of the state of the art is based on the consistent consideration
of the technology-specific characteristics of AR. Thus, this paper bridges the gap between research
in the context of AR, which is mainly focused on technical issues so far, and research on the strategic
planning of product service systems, which is often technology-agnostic. In our view, there is a
need for further research, particularly with regard to the implementation planning of the business
model. In order to minimize the risks associated with AR, an agile approach could prove promising,
involving the customer at an early stage and implementing the business model gradually.
11. Acknowledgements
Part of this research and development work was carried out in the research project “Instrumentarium
zur Implementierung von Augmented-Reality-basierten Produkt-Service-Systemen” (AcRoSS)
[Instruments for the implementation of Augmented Reality based product service systems]. The
project has been funded by the German Federal Ministry for Economic Affairs and Energy. The
authors would like to thank the project committee for their advice.
12. REFERENCES
Arnold, S., (2002), ISO 15288 Systems engineering – System life cycle processes. International Standards Organisation.
Aurich, J. C., Schweitzer, E. and Fuchs, C., (2007), Life Cycle Management of Industrial Product-Service Systems.
In Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses, Takata, S., Umeda, Y.
(Eds.). London: Springer-Verlag. doi: 10.1007/978-1-84628-935-4_30.
Azuma, R., (1997), A Survey of Augmented Reality. Teleoperators and Virtual Environments, 4/1997, 355-385. doi:
10.1162/pres.1997.6.4.355.
Barquet, A. P. B., Oliveira, M. G., Cunha, V. P. and Rozenfeld, H., (2011), Business Model Elements for Product-Service
System. In Proc. 3rd CIRP International Conference on Industrial Product Service Systems. Braunschweig:
Deutschland. doi: 10.1007/978-3-642-19689-8_58.
Bernardos, A. and Casar, J., (2011), Analyzing Business Models for Mobile Augmented Reality. In Proc. 15th
International Conference on Intelligence in Next Generation Networks. Berlin: Deutschland. doi: 10.1109/
ICIN.2011.6081111.
Bughin, J., Hazan, E., Lund, S., Dahlström, P., Wiesinger, A. and Subramaniam, A., (2018), Skill shift - automation and
the future of the workforce. New York: McKinsey.
Craig, A., (2013), Understanding Augmented Reality. Waltham: Elsevier.
Digi-Capital, (2018a), Ubiquitous $90 billion AR to dominate focused 15 billion VR by 2022. USA: Digi-Capital.
Digi-Capital, (2018b), AR/VR Europe Report, Q4, USA: Digi-Capital.
Dini, G. and Mura, D., (2015), Application of Augmented Reality Techniques in Through-life Engineering Services.
Amsterdam: Elsevier.
Fink, C., (2018), Charlie Fink’s Metaverse – An AR Enabled Guide to VR & AR. Washington: Cool Blue Media.
Gausemeier, J. and Plass, C., (2014), Zukunftsorientierte Unternehmensgestaltung – Strategien, Geschäftsprozesse und
IT-Systeme für die Produktion von morgen. München: Carl Hanser Verlag. doi: 10.3139/9783446438422.
Gausemeier, J., Wieseke, J., Echterhoff, B., Isenberg, L., Koldewey, C., Mittag, T. and Schneider, S., (2017), Mit Industrie
4.0 zum Unternehmenserfolg – Integrative Planung von Geschäftsmodellen und Wertschöpfungssystemen.
Paderborn: Heinz Nixdorf Institut.
Gausemeier, J., Dumitrescu, R., Echterfeld, J., Pfänder, T., Steffen, D. and Thielemann, F., (2018), Innovationen für
die Märkte von morgen: Strategische Planung von Produkten, Dienstleistungen und Geschäftsmodellen.
München: Carl Hanser Verlag.
Hayes, G., (2009), 16 Top Augmented Reality Business Models. Personalize media.
Herterich, M., Uebernickel, F. and Brenner, W., (2015), The Impact of Cyber-physical Systems in Industrial Services in
Manufacturing. In Proc. 7th Industrial Product-Service Systems Conf., St. Etienne: France. doi: 10.1016/j.
procir.2015.02.110.
Kipper, G. and Rampolla, J., (2013), Augmented Reality: An Emerging Technologies Guide to AR. Amsterdam:
Syngress.
Kiryakove, G., Angelova, N. and Yordanova, L., (2018), The Potential of Augmented Reality to Transform Education
into Smart Education. TEM Journal, Volume 7, Issue 3, 556-565.
Koch, G., (ed.) (2017), Digitalisierung – Theorien und Konzepte für die empirische Kulturforschung. Köln: Herbert
von Halem.
Köster, O., (2014), Systematik zur Entwicklung von Geschäftsmodellen in der Produktentstehung. Disseration,
Universität Paderborn, Fakultät Maschinenbau.
Li, M. M., Peters, C. and Leimeister, J. M., (2016), Digitale Service-Systeme. In Digitale Transformation im Unternehmen
gestalten, Gassmann, O., Sutter, P., (Ed.). München: Carl Hanser Verlag. doi: 10.3139/9783446451148.003.
Maimone, A., Lanman, D., Rathinavel, K., Keller, K., Luebke, D. and Fuchs, H., (2014), Pinlight displays – Wide field
of view augmented reality eyeglasses using defocused point light sources. Vancouver: ACM SIGGRAPH
Emerging Technologies.
Milgram, P., Takemura, H., Utsumi, A. and Kishino, F., (1994), Augmented Reality – A class of displays on the reality-
virtuality continuum. In Proc. SPIE Telemanipulator and Telepresence Technologies, Vol. 2351.
Nee, A. Y. C., Ong, S. K., Chryssolouris, G. and Mourtzis, D., (2012), Augmented reality applications in design and
manufacturing. CIRP Annals – Manufacturing Technology 2012. doi: 10.1016/j.cirp.2012.05.010.
O’Mahony, S., (2015), A Proposed Model for the Approach to Augmented Reality Deployment in Marketing
Communications. Procedia – Social and Behavioral Sciences 175.
Ong, S. K., Yuan, M. and Nee, A. Y. C., (2008), Augmented reality applications in manufacturing: a survey. International
Journal of Production Research, Vol. 46, Issue 10, 2707-2742. doi: 10.1080/00207540601064773.
Osterwalder, A. and Pigneur, Y., (2010), Business Model Generation. New Jersey: Wiley.
Osterwalder, A., Pigneur, Y., Bernarda, G., Smith, A., (2014), Value Proposition Design. New Jersey: Wiley.
Porcelli, I., Rapaccini, M., Espindola, D. B. and Pereira, C. E., (2013), Innovating Product-Service Systems through
Augmented Reality – A selection model. In The philosopher’s stone for sustainability, Shimomura, Y.,
Kimita, K. (Ed.), Berlin: Springer. doi: 10.1007/978-3-642-32847-3.
Porter, M., (1985), Competitive Advantage: Creating and Sustaining Superior Performance. New York: Free Press.
Porter, M. and Heppelmann, J., (2014), How Smart, Connected Products Are Transforming Competition. Harvard
Business Review, November, 64-88.
Porter, M. and Heppelmann, J., (2017), Why Every Organization Needs an Augmented Reality Strategy. Harvard
Business Review, November/December, 47-48.
Ran, Y. and Wang, Z., (2011), Virtual and Augmented Reality Applications in Industrial Design. In Proc. 3rd
International Conference on Machine Learning and Computing. Singapore: Singapore.
Röltgen, D., Anacker, H. and Dumitrescu, R., (2016), Einsatz- und Nutzenpotentiale von Augmented Reality im Kontext
von Industrie 4.0. In Proc. VDE Kongress Internet of Things, Mannheim: Deutschland.
Röltgen, D., Wortmann, F., Anacker, H. and Dumitrescu, R., (2017), Identification of Potentials for Augmented Reality
based Product Service Systems. In Proc. Symposium für Technologie und Vorausschau, Berlin: Deutschland.
Röltgen, D., Wortmann, F., Anacker, H. and Dumitrescu, R., (2018), Specification technique for augmented reality
based product service systems. In Proc. International Design Conference, Dubrovnik: Croatia. doi: 10.21278/
idc.2018.0221.
Rüßmann, M., Lorenz, M., Gerbert, P., Waldner, M. and Justus, J., (2015), Industry 4.0 – The Future of Productivity and
Growth in Manufacturing Industries. Boston Consulting Group: Boston.
Schmalstieg, D. and Höllerer, T., (2016), Augmented Reality: Principles and Practice. London: Pearson Education.
Schuh, G., Gudergan, G. and Kampker, A., (eds.) (2016), Management industrieller Dienstleistungen – Handbuch
Produktion und Management. Wiesbaden: Springer Vieweg.
Shostack, L., (1984), Designing Services That Deliver. Harvard Business Review, Vol. 62, No. 1, 133-139.
Tukker, A. and Tischner, U., (2006), Product-services as a research field – Past, present and future. Reflections from a
decade of research. Journal of Cleaner Production, 17/2006, 1552-1556. doi: 10.1016/j.jclepro.2006.01.022.
van Kleef, N., Noltes, J. and van der Spoel, S., (2010), Success factors for Augmented Reality Business Models.
University of Twente: Netherlands.
Vargo, S. and Lusch, R., (2004), Evolving to a New Dominant Logic for Marketing. Journal of Marketing, Vol. 68, 1.
doi: 10.1509/jmkg.68.1.1.24036.
Vargo, S. and Lusch, R., (2006), Service-dominant logic – reactions, reflections and refinements. SAGE journals,
Marketing Theory, Vol. 6, 281-285. doi: 10.1177/1470593106066781.
Zhou, F., Duh, H. and Billinghurst, M., (2008), Trends in augmented reality, interaction and display – A review of ten
years of ISMAR. In Proc. 7th IEEE/ACM International Symposium on Mixed and Augmented Reality, 2.
doi: 10.1109/ISMAR.2008.4637362
Zwicky, F., (1949), Morphologische Astronomie. In Physikalische Blätter, Vol. 5 No. 1, 4-10. doi: 10.1002/
phbl.19490050102.
Fabio Wortmann
Fraunhofer-Institute for Mechatronic Systems Design IEM,
Germany
E-mail: Fabio.wortmann@iem.fraunhofer.de
Robert Joppen
Fraunhofer-Institute for Mechatronic Systems Design IEM,
Germany
E-mail: Robert.joppen@iem.fraunhofer.de
Marvin Drewel
University of Paderborn, Advanced Systems Engineering
E-mail: marvin.drewel@hni.upb.de
Arno Kühn
Fraunhofer-Institute for Mechatronic Systems Design IE,
Germany
E-mail: arno.kuehn@iem.fraunhofer.de
Roman Dumitrescu
University of Paderborn, Advanced Systems Engineering
E-mail: roman.dumitrescu@iem.fraunhofer.de
Abstract
No other area shows such a potential for disruption as digital platforms. B2C platforms, like Amazon and Uber,
have radically changed the market situations within their industry. Until today, this change has mainly taken
place in the B2C sector. Still, first platforms are already established in the B2B sector. Examples are Adamos in
manufacturing and 365FarmNet in agriculture. With the entrance into the platform economy, companies are
confronted with huge challenges. One question is whether a platform can be established in a certain industry due to
its specific characteristics. Further questions are how a promising overall platform concept looks like, what relevant
platform services are and who the essential actors on the platform are. In literature, there are different approaches
for describing the benefits of a platform and designing a basic platform setup. Examples are the Platform Design
Toolkit and Platform Value Canvas, which can be used for describing a platforms value proposition. Another
example is the Platform Shell Model to describe the stakeholders of a platform. Still, those methods do not help
companies to create a basis for decision-making for a platform strategy.
In this paper we present a method for developing and evaluating concepts of a digital platform. Based on our
project experience, we derived a thorough procedure complemented with adequate methods to do so. The starting
point is the question of how a company should act regarding platforms in a certain industry. The goal is to develop
platform concepts and to provide an initial evaluation. All relevant actors of an industry and their pains and gains
should be considered. The platform concepts are based on the assumption that a platform can be described by its
services and actors. The services should also be bundled into clusters with regard to their synergies in order to
obtain consistent concepts. The validation shows that different platform concepts are promising depending on the
ecosystem. The most attractive services crystallize individually for each branch. Summing up, this paper describes a
thorough approach for developing and evaluating concepts of a digital platform. The results are a starting point for
the development of a detailed concept and a platform strategy.
Keywords: Digital Platform, Digitization, Platform Economy
1. Introduction
The disruption potential of digital platforms has been shown in the B2C and C2C areas. Platforms
dominate our daily lives (e.g. Booking.com, Amazon) and have an enormous growth and scaling
potential. Digital platforms, which were founded 10 years ago (e.g. Airbnb), are today often much
more valuable than companies in the same industry that have existed for 100 years (e.g. Hilton Hotels)
(Machatschke, 2016). The increasing interconnection of industries and the massively generated data
opens up new potentials for digital platforms in the B2B sector (Engels et al., 2017). Beyond the
classical trading or agency functions, smart services such as predictive maintenance can now be
offered via platforms. By aggregating the production data of a company, many other potentials are
also imaginable. For example, real-time data regarding machine utilization can be used to offer free
machine capacities on a marketplace.
A digital platform is characterized by its offered services and its roles. The services are necessary to
generate value for the actors. The roles must be filled by different actors to make the ecosystem work.
But the definition of platform services and the selection of actors for each role brings a variety of
challenges. Figure 1 shows the challenges different actors face when entering the platform economy.
Roles Actors
Component
Manufacturer
Consumer
Make use of services via digital
platforms (e.g. condition
monitoring) ? ?
Can be bound to platforms by
hardware (e.g. machines) ? Automation
Producer
?
Offer services via an existing
digital platform (e.g. condition Digital Platform
Mechanical and
monitoring)
Platform Core
? ? Plant Engineers
The consumer makes use of the platform services and has to perceive value through using the
platform. By chosing one platform to use, the consumer also binds himself to the data standards
an interfaces pretended by the platform. Thus the consumer can get dependent from the platform.
The producer offers the services on the platform for consumers to use. On the one hand, producers
have the opportunity to get access to a variety of consumers due to the platform. On the other
hand, the transparency forces producers to offer fair conditions to consumers, because they are
compareable to others. The operator offers the platform to consumers and producers and has to
manage the network. The main challenge is to establish the platform and to create incentives for all
necessary actors.
The different actors in B2B have different sights to the platform topic. For component suppliers,
other services are interesting than for producing companies. Component suppliers are for exemple
more attracted by service regarding the offering of components and consulting. Producing companies
for example need service for optimizing their machines and plants and the procurement process.
Platform operators have the challenge to create a value for a maximum number of actors and to
connect them via the platform. This is the only way to address a sufficiently large target group and
to positively affect the success of the platform.
IAMOT 2019 | 649
Managing Technology for Inclusive and Sustainable Growth
In the forthcoming platform economy, companies now have to make difficult decisions. Which
platform are they able to use? The amount of possible platforms is huge and non-transparent.
Which Interfaces do they have to serve and how does the company change by realizing a platform
strategy? The decision for a platform may involve technical lock-in. Is the development of an own
platform the best strategy?
In this Paper we present a methodology for developing and evaluating concepts for a digital platform.
Through the developed platform concepts and the first evaluation by experts, companies should
receive a first point of reference for a strategic direction and the further planning and implementation
of a platform strategy. The focused main question in this paper is: Will the development of an own
platform be promising? The following sub-questions are associated with this:
●● Which are the relevant actors of an ecosystem and what are their pains and gains?
●● Which platform services address pains and gains and are they desired by potential actors?
●● What are possible platform concepts and are they promising?
The paper is structured as follows. In the next chapter, the problem for companies in context of digital
platforms is pictured. The term digital platform is explained and opportunities and challenges are
described. The chapter closes with the need for action for a basis of decison. The following chapter
presents the state of research. It lists approaches in three categories that already address parts of the
problem. Finally it is shown, that existiting approaches do not serve as a basis for decision at all.
The need for the methodology developed is derived. The next chapter describes the developed
methodology. Therefore a procedure model is presented. The methodology is then explained in detail
based on the phases of the procedure model. In the final chapter a short conclusion and outlook is given.
2.2. Digital Platforms as a Successful Business Strategy for the Consumer Sector
In B2C, platforms have proven to be a successful business strategy. This has changed the mechanisms
of entire industries. So far, these changes have mainly taken place in the B2C sector (Libert et al., 2016).
The cause of the fundamental change and the basis for the success of digital platforms is the network
effect (van Alstyne et al., 2016), (Baums et al., 2015), (Eisenmann et al., 2006). (Plugmann, 2018),
(Parker et al., 2012).
Through the network effect, a platform gets more attractive for a group of actors, when another
group is growing. In the end, the majority of actors uses platforms. The value creation based on
pipelines dominated industries in the past. This now changes fundamentally to the use of platforms.
This is shown by the example of Airbnb. Seekers for housings are more attracted by the platform,
if there is a multitude of providers. Providers are interested in offering housings on a platform
with lots of potential customers. Nowadays, the majority of bookers uses platforms and wont book
housings directly from the provider.
There is a reason that B2C platforms can achieve those network effects. In contrast to the B2B
sector, entry barriers for actors are very low and target groups of such platforms are usually
huge. Therefore, B2C platforms are characterised by enormous growth and scaling potentials
as soon as the critical mass is reached (Van Alstyne et al., 2016), (Plugmann, 2018). Critical
mass is the point at which the platform grows independently and the start-up phase is overcome
(Schüler, 2017). According to a VDMA study, the seven largest B2C platforms now have higher
market capitalisation than the entire Euro Stoxx 50 (Rauen et al., 2018).
Platforms are very popular in the B2C area, as they create value in many different ways. Platforms
reduce transaction costs through their function as intermediaries. On the one hand, it is the result
of the simplified interaction via a platform. On the other hand, it results from the use of specific
platform services. These allow the mediation between supply and demand, the provision of data or
the handling of contract or payment processes. The standardization of these processes, the reduced
coordination effort and the coordinated ecosystem reduce transaction costs (Rauen et al., 2018).
Furthermore the resource requirements are moderate. (Plugmann, 2018), (Van Alstyne et al., 2016).
In addition to decreasing transaction costs, platforms offer customers very specific benefits. This
benefit is generated by the fact that many transactions would not be possible without the platform.
The network and the transparency allow users to find offers they would not see without a platform.
The main value creator in B2C is the offered network and the transparency (Engelhardt et al., 2017).
The success of most B2C platforms can be traced back to this.
01101001
Actors Data
01101001
01101001
Legend: Challenge
The main difference between classic B2B platforms and platforms in the age of industry 4.0 is
the increasing aggregation and processing of data through the platform. So it is not so much the
pure intermediary role that will characterize future platforms. The aim will be to create added value
through the processing of data. This results in a multitude of new potentials for services, which
can be offered via digital platforms. As already mentioned, unlocking these potentials confronts
companies with various challenges.
Aggregating production data on one platform is a technical challenge. In many companies, machines
and plants of different ages and manufacturers are used. The resulting heterogeneity of interfaces
makes it difficult to aggregate data on a single platform. On the one hand, there must be connection
options for heterogeneous industrial machines and systems using standardized and open interfaces.
On the other hand, the analysis of operational data must be possible. Aggregated production data
can be very heterogeneous. Industrial machines and plants are digitized context-specifically.
Furthermore, communication protocols must be provided and modularized expandability of the
platform should be ensured (Dremel and Herterich, 2016). Even if the technical connection and data
processing is possible, companies must first be convinced to store their data on the platform.
Reservations regarding security and privacy and the imminent loss of data sovereignty can frighten
companies from joining the platform (Wlodarczyk et al., 2009). If this hurdle is also overcome, the
variety of data must be processed and evaluated in order to generate useful smart services. This also
raises the question which smart services provide the customer sufficient benefits, so that he joins
the platform. Last but not least, it is also important to create incentives for producers to use the
platform and accept the threat of losing the direct customer access.
The multitude of possible platform szenarios and the challenges connected with the planning and
realizing of a platform complicates the decision of entering the platform economy. To face those
challenges, every company needs an individual platform strategy. The development of such
strategy is in no way trivial. Every company has its own needs and skills that has to be mentioned.
Also every branch is different. Different branches offer different potentials for digital platforms.
It is necessary to understand the mindset and to identify the needs of the actors within a branch.
Every company needs an adequate decision basis for a strategic direction.
In this paper we focus the first mentioned option. We serve a basis to decide wheather developing
an own platform is promising or not. To do so, several aspects has to be taken in calculation.
It is necessary to analyze the branch to identify potentials for digital platforms. To do so, key actors
in the branch must be identified and their value-adding activities analyzed. In addition, it is useful
to scan for existing platforms in the branch. This shows if the needs of actors are already addressed
by platforms. Even if potentials exists, the success of a platform is by no means assured. Different
potentials result in different conceivable platform concepts. In addition to a number of platform
services, these also include the necessary actors. It is important that the necessary actors accept the
platform concept and are willing to join. In order to obtain an initial direction for the planning of a
platform strategy, it is therefore necessary to create an appropriate basis for decision. The aim of this
paper is therefore the development and evaluation of platform concepts, which serve as a decision
basis for the planning of a platform strategy.
Reillier and B. Reillier (Parker et al., 2016), (L.C. Reillier and B. Reillier, 2017). These works
can be used to evaluate the chances of success of a digital platform in terms of monetarization
and canvassing for participants. Approaches to find and evaluate already existing platforms can
be used to assess the chances to differentiate a concept for a new platform as well as to rate a
new concept within the process. An exemplary method is proved by Drewel and Gausemeier
(Drewel and Gausemeier, 2018). Additionally these works can be used to increase the chances
of success of a digital platform as they can help to gather participants or to earn money with an
already developed platform.
The mentioned and further approaches from the state of the art were examined for a possible
utilization for developing and evaluating concepts of a digital platform and they were incorporated
into the developed method, which will be presented in the following chapter.
Figure 3: Procedure Model for Developing and Evaluating Concepts of a Digital Platform
In phase 1, the analysis of the ecosystem will reveal relevant actors and identify unsatisfied needs
of those actors. For this purpose, value-adding activities of the actors will be analyzed and pains
and gains of the actors will be identified by using a Value Proposition Canvas. In addition, existing
platforms within the industry will be analyzed. It is important to assess wheather they already address
some needs of the actors. Based on the unsatisfied needs, satisfying platform services are identified
in the second phase. For this purpose, a comparison is made with a catalogue of platform services.
Additionally, depending on unsatisfied needs, ideas for new services are collected. In the third
phase, the services and actors from phases 1 and 2 are evaluated in an interview series with regard
to their importance for a platform. The evaluated services are then subjected to a synergy analysis so
that consistent service clusters can be represented in an MDS. In the last phase promising platform
concepts are developed. For this purpose, service clusters are selected that have been assessed
as “important” in total. The selected service clusters are then bundled into meaningful platform
IAMOT 2019 | 654
Developing and Evaluating Concepts for a Digital Platform
concepts. Necessary actors that serve the services have to be identified. The platform concepts are
finally documented in a profile and evaluated by experts. In the following, the method will be shown
using the example of the ecosystem “switch gear manufacturing”.
small
Simple mech. Complex mech. 1. Mechanical engineers incl. control cabinet building
medium
usually takes over the specification of the control cabinet and uses for the work control cabinets which were required
Electric and electronic components various engineering software. for this purpose, are manufactured as
requested. This also includes the
standards of specific industries.
Tools
Engineering Software
Complementary Software
Figure 4: Value Chain in the Ecosystem “Switch Gear Manufacturing” and Actors
Based on a customer order, a machine is developed by the mechanical engineering. The corresponding
ECAD data is forwarded to the switch gear manufacturer together with an order for a switch cabinet.
The switch cabinet can be built directly by a machine and plant manufacturer with its own switch
gear manufacturing or outsourced to an external switch gear manufacturer. Based on the order, the
switch gear manufacturer procures necessary components and tools from the component suppliers.
A distinction is made between mechanical components, electrical or electronic components and
tools. Engineering and complementary software are also used along this value chain.
The individual actors are then specified in more detail. For this purpose, a profile is created, which
contains essential information for the further procedure. Figure 5 shows an exemplary profile of
the actor “Machine and plant manufacturer including switch gear manufacturing”. In addition to a
description of the actor, value-adding activities are identified. These are used as input for the Value
Proposition Canvas.
1. Mechanical engineers incl. control cabinet building
The identified pains and gains associated with the value-adding activities are also recorded in
the profile. These will later be used to select satisfying platform services. In addition, the value
proposition of the actor in the value chain is documented. A list of exemplary companies that fulfill
this role completes the profile.
Once the existing ecosystem has been analyzed, existing platforms within the industry are also
researched and examined to see whether they already address pains and gains. Figure 6 shows an
exemplary platform profile. The platform profile contains a description and key information about
the platform. Furthermore, the platform is characterized by generic platform features from literature.
The platform focus indicates whether the platform is more mercantilistic-oriented or
technological-oriented. The openness shows how strong the regulations are for the access of actors.
Neutrality indicates the influence of the platform operator on the platform. The asset ownership
indicates how much of the necessary resources are provided by the operator (E.g. DriveNow has a
high asset ownership. BMW provides the cars that are used for the platform). The service portfolio
indicates whether the type of goods transferred is digital or physical. The customer segment
specifies whether the platform is more regionally or globally oriented.
In addition, exemplary actors of the platform are listed and special features of the platform are
documented. The identified platforms are compared with the needs of the actors. On the basis of the
unaddressed pains and gains, the potentials for a new digital platform can be derived.
Short description
CADUNITY is a virtual marketplace for the exchange of standardized ECAD article master data. Field-proven, high-quality
ECAD data of various technical components can be sold or purchased. They can be used in any ECAD software and are
therefore directly available for the engineering process for a fee. (The providers receive money according to the use of their
data.)
Existing and
adressed services
Needs of actors
In the first step, existing platforms such as ePlan Dataportal, ADAMOS or Airbnb were examined
for platform services. In addition, ideas for further platform services were collected on the basis of
the unsatisfied needs of the actors within the ecosystem. This resulted in a longlist of 112 services.
The list was reduced to 65 services by a pre-evaluation, in which double entries were eliminated and
similar services were combined. A shortlist with a total of 48 platform services was derived from a
subsequent comparison with the needs of the actors. These services will be used to develop platform
concepts in the last phase.
The services were recorded in service profiles (Figure 8). Each service was provided with a
short description and a pictogram. In addition, the value proposition of a service is noted in key
points. After the services in phase 3 have been evaluated by experts from the departments cabinet
manufacturer, machine builder, component supplier and software provider, the relevance of the
services is supplemented from the point of view of the respective expert group. The catalogue of
platform services serves as the basis for the expert surveys in the next phase.
Software provider
Synergiematrix
Synergy matrix
Aspekt: Nutzen
Which service in row i has
Suchmaschinenoptimierung
Engine Optimization
synergies with services in
Webshop
Produktkonfiguratoren
Kollaborationsbereich
column j?
Skala
22Community-Functions
CAE-Funktionalitäten
Community-Funktion
Area
Functionalities
Vergleichsfunktion
1: Keine Synergien
Scale
Function
Webshop
Service
Gebrauchtmarkt
2:
1: In
NoAusnahmenfällen
synergies
Support
OnlineSupport
Bezahlservice
Simulationen
10Collaboration
Umfassender
11Configurator
Shop
3:
2: Kann Potentiale
In special casesbergen
Dashboard
12Simulation
55Dashboard
3: Synergien
4: May contain synergies
wahrscheinlich
66Compare
33Payment
44Search
11Holistic
77Resale
4: Zwingende
Synergies Kombination
likely
88Online
5:
99CAE
5: Forced combination
10
11
12
A comprehensive web shop
11Holistic
Umfassender Webshop
Webshop 5 3 5 4 3 5 3 3 3 2 5 1 has to include a payment
22Community-Functions
Community-Funktionen 3 5 1 1 2 1 3 3 1 4 1 1 service.
33Payment
Bezahlservice
Service 5 1 5 5 2 5 5 1 2 1 2 3
44Search
Suchmaschinenoptimierung
Engine Optimization 4 1 5 5 4 2 3 2 2 1 2 1
55Dashboard
Dashboard 3 2 2 4 5 3 3 3 2 1 4 2
66Compare
Vergleichsfunktion
Function 5 1 5 2 3 5 5 1 3 1 3 2
77Resale
Gebrauchtmarkt
Shop 3 3 5 3 3 5 5 1 1 1 1 1 A general, freely accessible
88Online
OnlineSupport
Support 3 3 1 2 3 1 1 5 3 3 3 3 online support does not
99CAE
CAE-Funktionalitäten
Functionalities 3 1 2 2 2 3 1 3 5 4 3 3 require a payment service.
10Collaboration
10 Kollaborationsbereich
Area 2 4 1 1 1 1 1 3 4 5 1 3
11Configurator
11 Produktkonfiguratoren 5 1 2 2 4 3 1 3 3 1 5 3
12 Simulationen 1 1 3 1 2 2 1 3 3 3 3 5
The assessment of synergies is based on a five-step scale. The scale is graduated as followed:
No synergies, in special cases, may contain synergies, synergies likely and forced combination.
After the filled triangular matrix has been mirrored at the diagonal, it represents an invertet distance
matrix. The distrance matrix serves as input for a multi dimensional scaling (MDS). Figure 10 shows
the result of the multidimensional scaling. Service combinations that were highly rated will be closer
together in the MDS than combinations that were low rated. The inverted value of a cell is therefore
used to calculate the MDS (e.g. 5 is turned to 1/5). The aim of MDS is to identify service clusters
with high synergy.
Six service clusters were then identified within the MDS. The clusters comprise services in the areas
of Webshop, Analysis, Digital Qualification, Specific Consulting, Human Resources and Service.
The next step is to form meaningful platform concepts from the clusters.
30 Webshop
7 11
35
14 1 15
16
Analysis 22
21
25
20 Digital 8 4
27 5
19 Qualification
26 2
12 34 32
17 9 3 31
18 33
37 29 13
6 Human
Resources
28 23
36 10
41
48 42
Specific
24 44 39 40
Consulting 46 45
47 43
38 Service
Legend
Important Service Rather important Service Rather unimportant Service Cluster
In addition to the platform services and actors, the profile contains a brief description of the platform
concept. Furthermore, findings from the expert survey related to the platform concept are documented.
In addition, the profile contains opportunities and risks associated with the implementation of this
concept. In a final step, the identified platform concepts are evaluated by an internal expert survey
with regard to their attractiveness for the company and the attractiveness for the industry. The results
are presented in a portfolio (Figure 12).
5
? +
Realize
5
4
2
Attractiveness
Monitor
3 1 Trading Platform
1 3 Capacity fare
1 - 5 Education platform
1 Reachability 5
The experts rated the attractiveness for the industry and for the organization for each platform
concept on a scale from 1 (very bad) to 5 (very good). The portfolio is the basis for deriving
recommendations for a strategic direction. Companies must now decide which platform concept
is most popular for potential actors and at the same time offers a sufficiently high value for the
company itself. In addition, the risks that have been identified by the expert survey must be taken
into calculation. For the development of a platform strategy, the selection of a promising platform
concept serves as a starting point.
6. References
Baums, A., Schlösser, M. and Scott, B., (2015), Industrie 4.0: Wie digitale Plattformen unsere Wirtschaft verändern-und
wie die Politik gestalten kann. In Kompendium Digitale Standortpolitik, Baums, A., Schlössler, M., Scott,
B., (eds.), Vol. 2, Berlin: APCO Worldwide.
Bushan, N., Rai, K., (2004), Strategic decision making: Applying the analytic hierarchy process. New York: Springer.
Choudary, S.P., (2015), Platform Scale: How an emerging business model helps startups build large empires with
minimum investment. Platform Thinking Labs.
Dremel, C. and Herterich, M., (2016), Digitale Cloud-Plattformen als Enabler zur analytischen Nutzung von
operativen Produktdaten im Maschinen-und Anlagenbau. In HMD Praxis der Wirtschaftsinformatik,
pp. 646-661. Springer.
Drewel, M. and Gausemeier, J., (2018), Digital B2B-Platforms and how to find the right one. In Proceedings of the 13th
European Conference on Innovation and Entrepreneurship, Portugal: Aveiro.
Engelhardt, S., Wangler, L. and Wischmann, S., (2017), Eigenschaften und Erfolgsfaktoren digitaler Plattformen.
Berlin: AUTONOMIK für Industrie 4.0.
Engels, G., Plass, C. and Ramming, F.J., (2017), IT-Plattformen für die Smart Service Welt: Verständnis und
Handlungsfelder. acatech DISKUSSION.
Evans D.S., (2012), Governing bad behavior by users of multi-sided platforms. Berkeley Technology Law Journal,
27(2).
Evans, D.S. and Schmalensee, R., (2016), Matchmakers: The New Economics of Multisided Platforms. Boston: Havard
Business Review Press.
Flörecke K.D., (2017), Volkswagen “ONE” gestartet: VW-Konzern und Zulieferer auf gemeinsamer digitaler Plattform.
Hagiu, A. and Altman, E.J., (2017), Eignet sich ihr Produkt für eine Plattformstrategie? Harvard Business Manager,
81-88.
Libert, B., Beck, M. and Wind, J., (2016), The Network Imperative. Boston: Harvard Business Review Press.
Machatschke, M., (2016), Wie gut ist Airbnb wirklich? Manager Magazin.
Manner, J., Nienaber, D., and Schermann, M. and Krcmar, H., (2013), Six Principles for Governing Mobile Platforms.
Munich: Technische Universität München.
Mittag, M., Rabe, M., Gradert, T., Kuehn, A., Dumitrescu, R., (2018), Building blocks for planning and implementation
of smart services based on existing products, CIRP IPS², May 29-31, Linköping, 2018
Moazed, A. and Johnson, N.L., (2016), Modern Monopolies: What It Takes to Dominate the 21st Century Economic.
New York: St. Martin`s Press.
Parker, G. and Van Alstyne, M., (2012), A digital postal platform: Definitions and a Roadmap. In MIT Center for Digital
Business, Working Paper.
Parker, G.G., Van Alstyne, M.W. and Choudary, S.P., (2016), Plattform Revolution: How Networked Markets are
Transforming the Economy - and How to Make Them Work for You. New York: W.W. Norton & Company.
Parsons, C., Leutiger, P., Lang, A. and Born, D., (2016), Fair Play in der digitalen Welt: Wie Europa für Plattformen den
richtigen Rahmen setzt. Munich: Roland Berger.
Peters, M.L. and Zelewski, S., (2007), TOPSIS als Technik zur Effizienzanalyse. WiSt–Wirtschaftswissenschaftliches
Studium, Zeitschrift für Studium und Forschung, 9-15.
Plugmann, P., (ed.) (2018), Innovationsumgebungen gestalten. Impulse für Start-ups und etablierte Unternehmen im
globalen Wettbewerb. Wiesbaden: Springer.
Rabe, M., Asmar, L., Kühn, A., Dumitrescu, R., (2018), Planning of Smart Services based on a Reference Architecture.
International Design Conference 2018, May 21-24, Dubrovnik, 2018
Rauen, H., Glatz, R., Schnittler, V., Peters, K., Schorak, M.H., Zollenkop, M., Lüers, M. and Becker, L., (2018),
Plattformökonomie im Maschinenbau: Herausforderungen–Chancen–Handlungsoptionen. Munich: Roland
Berger.
Reillier, L.C. and Reillier, B., (2017), Platform strategy: How to Unlock the Power of Communities and Networks to
grow your Business. London: Routledge.
Reuver, M., Sorensen, C. and Basole, R.C., (2017), The digital platform. A research agenda. Journal of Information
Technology, 33(2), 124-135.
Scholten, R., (2016), New business model canvas for digital platforms. LinkedIn [4 August 2018]. https://www.linkedin.
com/pulse/new-business-model-canvas-two-sided-digital-platforms-scholten
Schüler, F., (2017), Skalierung und Steuerung digitaler Plattformen. In Sitzung des AK Integrationsmanagement,
Schmalenbach-Gesellschaft für Betriebswirtschaft e.V., Köln.
Tiwana, A., Konsynski, B. and Bush, A.A., (2010), Research commentary-Platform evolution: Coevolution of platform
architecture, governance, and environmental dynamics. Information Systems Research, 21(4), 675-687.
Van Alstyne, M. W., Parker, G.G., Choudary, S.P., (2016), Plattform statt Pipeline. Harvard Business Manager, 23-31.
Van Alstyne, M., Parker, G. and Choudary, S., (2016), Pipelines, platforms, and the new rules of strategy. Harv Bus
Rev, 94(4), 54–60.
Walter, M. and Matthias, L., (2017), Platform Innovation Kit; User Guide. Dresden: Platform & Blockchain Innovation
Lab.
Wlodarczyk, T.W., Rong, C. and Thorsen, K.A.H., (2009), Industrial cloud: Toward inter-enterprise integration. In:
Cloud Computing, MG Jaatun, G Zhao, C Rong (eds.), pp. 460-471. Heidelberg: Springer.
Zangenmeister, C., (1970), Nutzwertanalyse in der Systemtechnik: Eine Methodik zur multidimensionalen Bewertung
und Auswahl von Projektalternativen. München: Wittermann.
Sonal Daulatkar
National Institute of Industrial Engineering (NITIE), Decision,
Sciences and Information Systems, India
E-mail: research.sonal@gmail.com
Purnima S. Sangle
National Institute of Industrial Engineering (NITIE), Decision,
Sciences and Information Systems, India
E-mail: purnima@nitie.ac.in
Shirish Sangle
National Institute of Industrial Engineering (NITIE), Industrial Safety,
and Environmental Management, India
E-mail: shirishsangle@nitie.ac.in
Abstract
Technology Management has been long acknowledged as a tool for Global competitiveness. At the firm level,
organizational factors have been focused on by researchers among those likely to have an influence on how
technology may be managed. This work posits that the key to attaining maximal business value lies in maximizing
Shareholder Value for achieving Sustainable Value. The maximization of Business Value, as proposed here,
depends on the perfect co-alignment of four main organizational factors–Strategy, Structure, Process and Culture.
Any technology resource may then be co-aligned with them for successful technology management.
The foundation of the ‘Strategic Business Value Cube’ has been laid in this work. It builds on the two dimensions
-i. Organizational Strategy and ii. Organizational Structure and Process mechanism, as originally proposed by Miles
and Snow (1978) as Strategic Archetypes, but further entwines the implied and matching Organizational Culture
types by Miles and Snow, using Cameron and Quinn’s (2011) Culture Vale Framework as the third dimension.
It thus derives four ideal Organizational Archetypes along the diagonal cells across the four lattices of the
proposed Strategic Cube and the corresponding maximal business value. The other cells represent other plausible
configurations of Organizational characteristics that an organization may possess. The measure of Business
Value used here, Shareholder Value, is the corporate pay-off in the Hart and Milstein’s (2003) Sustainable Value
framework which suggests Sustainability strategies for organizations. The work tests first and second-order
statistical models for each of the four hypotheses for a pilot sample of 198 organizations.
The work proves that co-variation model is a better measure of fit between Strategic Archetypes and Culture than
structural equation model or main effects model. Since none of the hypotheses may be rejected, the work lays the
foundation of the foundation of the existence of the concept of the Strategic Business Value Cube. The Strategic
Business Value scale has been developed. The study suggests that future work could co-align the Organizational
Archetypes, conceptualized in this study, with technology resources to enhance management of technology.
Keywords: Strategic Business Value Cube, Organizational factors, Co-alignment, Co-variation, Organizational
Archetypes, Shareholder Value, Strategic Archetypes
The Miles and Snow (1978) framework has continued to be the most widely used categorization for
strategy, which specifies strategy, structure and process characteristics quite clearly in the form of
SA (Strategic Archetypes). This study has developed this thread further with the help of Hart and
Quinn’s (1993) Executive Leadership which maps the leadership roles onto the Cameron and Quinn’s
(2011) CVF (Competing Values Framework) and to culture types for each Strategic Archetype
(SA). This results into the development of four OAs (Organizational Archetypes)–Defender,
Analyzer, Product/ Service Innovator and Market Prospector, each of which is based on Hart and
Milstein’s (2003) Shareholder Value framework to create differing types of intangible BV (Business
Value)–a. cost and risk reduction, b. reputation and legitimacy, c. innovation and repositioning and
d. growth path and trajectory, respectively. This is visualized as the Strategic Management Cube
with three dimensions–Business strategy, structure and process mechanism to derive the SBVC
(Strategic Business Value Cube). The four alternate hypotheses that have been tested for fit as
co-variation as suggested by Venkatraman (1989) by using first and second-order statistical models.
The derived Organizational Archetypes may be co-aligned with Technology resources for
maximizing Business Value using Technology Management.
2. Literature Review
Although the corporate world uses the term ‘Strategy Cube’ to describe their services or the business
itself, research literature has very few analogies in the cube form, wherein the main ones include
the Kopelman and associates’ (Kopelman and Prottas, 2012) Cube One framework which posits
that three distinct sets of practices drive organizational performance: enterprise, customer and
employee-directed and Rubik’s Cube of Organization Structure suggests that managers work with
current structure which is aligned with strategy and structure around purpose rather than personalities
(Ashkenas, 2011).
as a market itself” and that as assessed in Cameron and Quinn (2011), OCAI is a results-oriented
workplace and seems to correspond to an Analyzer SA. The Clan culture is typified as “a friendly
place to work where people share a lot of themselves” (Cameron and Quinn, 2011). It seems that
the Clan culture reflects the culture of a Prospector SA with a Product/Service transformation and
innovation orientation. A chief objective of Adhocracy culture is “to foster adaptability, flexibility
and creativity where uncertainty, ambiguity and information overload are typical” and “an important
challenge for these types of organizations is to produce innovative products and services and to
adapt quickly to new opportunities” (Cameron and Quinn, 2011). Hence, the adhocracy culture, as
assessed in the OCAI, is characterized by a dynamic, entrepreneurial and creative workplace. This
culture type seems to be prevalent in Prospector type of an organization with an orientation towards
market-innovation.
Borrowing from the evolved axes of the Sustainable Value framework, it is suggested that:
i. Defender SA should ideally co-align with Hierarchical culture to create BV1
(Cost and Risk Reduction) and such an OA (Organizational Archetypes) name be
retained as Defender.
ii. Analyzer SA should ideally co-align with Market culture to create BV2 (Reputation
and Legitimacy) and such an OA name be the same as Analyzer.
iii. Prospector SA which co-aligns with Clan culture should result in the creation
of BV3 (Innovation and Repositioning) and such an OA be named as
Product/ Service-Innovator (Prospector1) wherein the strategy is to develop
innovative products/services to reposition the business.
iv. Prospector SA which co-aligns with Adhocracy culture should result in the
creation of BV4 (Growth Path and Trajectory) and such an OA be named as
Market-Innovator/ Prospector (Prospector2) wherein the strategy is to reach innovative
products/ services into new markets and envision the strategies for the future.
4.2.1. Propositions
P1: Organizational Archetype D–Defender (Defender SA co-aligned with Hierarchical
Culture) will achieve BV1 of Cost and Risk reduction.
P2: Organizational Archetype C–Analyzer (Analyzer SA co-aligned with Market Culture)
will achieve BV2 of Reputation and Legitimacy.
P3: Organizational Archetype B–Prospector 1 (Prospector SA co-aligned with Clan
Culture) will achieve BV3 of Innovation and re-positioning.
P4: Organizational Archetype A–Prospector 2 (Prospector SA co-aligned with Adhocracy
Culture) will achieve BV4 of Growth path and Trajectory.
The ideal path of progression followed by an organization to attain maximal BV should flow along the
OAs. It may be noted that in all lattices, the low BV1 is definitely achievable and corresponds to that
achievable by OA Defender although the corresponding lattice may have some of the organizational
characteristics different from this archetype, the next level being BV2, the third being BV3 and
the fourth being BV4. It is proposed that only the four ideal OA–Defender, Analyzer, Prospector1
and Prospector2 achieve the highest level of Business Value possible with the ideal co-alignment
of matching Strategy, Structure, Process and Culture and is hence strategic in nature. The other
combinations will achieve BV limited by the lowest organizational factor in the combination.
5. Research Methodology
The scale development procedure as suggested by Arnold and Reynolds (2003) is divided into three
following phases–item generation and selection, pilot testing and scale validation.
Kaiser-Meyer-Olkin (KMO) test as suggested by Tabachnick and Linda (2012) and significant
Bartlett’s test of spherecity with all diagonal elements (= 1) and non-diagonal being non-zero, have
been adhered to. For SA, all the communalities (>0.466), the KMO (0.923), Bartlett’s is significant
and variance explained (44.47%) respectively. On carrying out EFA, two items of the three from
the Analyzers grouped themselves under Defender attribute, which is acceptable since as brought
out by Conant et al. (1990), Analyzers may sometimes behave as Defenders or Prospectors.
Thus, the obtained factor structure does corroborate with Miles and Snow typology’s theory and
hence the factor structure is acceptable. For the OCAI scale, the three factor solution accounted
for 63.496% variance in the items that were analyzed, KMO value (0.889) and Bartlett’s Test of
Sphericity has also been found to be significant, while the communalities were medium (0.5-0.723).
The Clan and Adhocracy culture types’ items grouped together into component 1, while component
2 clearly had all the Market culture type’s items and component 3 had Hierarchical culture types.
For the SBV scale, KMO test fetched (0.914) with significant Bartlett’s test of sphericity,
Communalities (0.461-0.716) and the total variance explained was found to be (63.45%).
A two-factor solution grouped BV1 and BV2 together for the BV scale, thus reflecting the lower
quadrants of Shareholder Value framework together representing ‘today’ and the BV3 and BV4 and
of the upper quadrants together representing ‘tomorrow’.
The Convergent Validity for the scales above has been evident from the high factor loadings within
each component and so is the Discriminant validity from an absence of cross-loadings or those with
values (<0.3).
A CFA of the measurement models for the pilot sample of 198 organizations has been carried out.
There were no Convergent Validity issues for any of the four constructs’ sub-constructs as CR>
AVE and AVE > 0.5. As far as Discriminant validity is concerned, the BV scale showed no issues
as MSV < AVE and ASV < AVE. However, it was not the case for SA and Culture and hence we
went ahead to check for covariance between the two so that co-alignment is confirmed as suggested
in the SBVC.
SA
Problem and Solution Organizational Culture Description Remark Leadership process Strategic BV
Culture type Snow’s
Description Role mechanism
typology)
Hart and
Source: Miles and Snow Miles and Snow Current
Cameron and Quinn (2011) Derived Quinn, Hart and Milstein (2003)
(1978) (1978) Study
(1993)
“How to maintain Hierarchy “A very formalized and structured It is thus a Mechanistic Defender: Cost and Risk-efficiency (D)
strict control of the place to work. Procedures govern perfect culture – “include a Strategy- Remark: Coincides with the
organization to ensure what people do. The leaders for a Defender top-management maintaining a Defender’s goals : “How to “seal
efficiency” pride themselves on being good as it provides group heavily secure niche off’ a portion of the total market
Solved “through coordinators and organizers, who the cultural dominated by in relatively to create a stable set of products
a combination of are efficiency minded. Maintaining a solution to the production and stable market and customers. How to produce
structural and process smooth-running organization is most Defender’s cost-control segments and distribute goods or services
mechanisms that can be critical. Formal rules and policies administrative specialists, little as efficiently as possible.”
generally de-scribed as hold the organization together. The problem. or no scanning of
‘mechanistic’”. long-term concern is on stability the environment
and performance with efficient, for new areas
smooth operations. Success is defined of opportunity,
in terms of dependable delivery, intensive
smooth scheduling and low cost. planning oriented
Analyzer
The management of employees is toward cost and
Defender
concerned with secure employment other efficiency
and predictability.” issues, functional
structures
characterized
by extensive
division of labor,
centralized
control,
communications
through formal
hierarchical
channels and so
on.”
SA
Problem and Solution Organizational Culture Description Remark Leadership process Strategic BV
Culture type Snow’s
Description Role mechanism
typology)
Hart and
Source: Miles and Snow Miles and Snow Current
Cameron and Quinn (2011) Derived Quinn, Hart and Milstein (2003)
(1978) (1978) Study
(1993)
Analyzer
penetration. Competitive pricing and not methods,
market leadership are important. The product or
organizational style is hard-driving project structures
competitiveness.” characterized by
Managing Technology for Inclusive and Sustainable Growth
a low degree of
formalization,
decentralized
control, lateral as
well as vertical
communications
and so on.”
OA(using
Administrative Executive Structure-
Organizational Miles and
SA
Problem and Solution Organizational Culture Description Remark Leadership process Strategic BV
Culture type Snow’s
Description Role mechanism
typology)
Hart and
Source: Miles and Snow Miles and Snow Current
Cameron and Quinn (2011) Derived Quinn, Hart and Milstein (2003)
(1978) (1978) Study
(1993)
“Prospector’s “A very friendly place to work where It is thus a Motivator Organic- Product/ Innovation and Re-positioning
administrative problem people share a lot of themselves. It is perfect culture “include a Service (B)
flows from its changing like an extended family. The leaders for a Product/ top-management Innovator: Remark: This coincides with the
domain and flexible or head of the organization, are Service group dominated The strategy Innovator’s goal : i. “How to
technologies: how to considered to be mentors and, maybe Innovator as by marketing is “to find locate and exploit new product/
facilitate rather than even, parent figures. The organization it provides and research and and exploit service opportunities.
control organizational is held together by loyalty or tradition. the cultural development new product”/ ii. How to avoid long-term
operations.” Commitment is high. The organization solution to the experts, service commitments to a single
The deployment Clan emphasizes the long-term benefit of Innovator’s planning that opportunities. technological process”.
and coordination of human resource development and administrative is broad rather
“resources among attaches great importance to cohesion problem. than intensive
numerous decentralized and morale. Success is defined in and oriented
units and projects rather terms of sensitivity to customers and toward results
than to plan and control concern for people. The organization not methods,
the operations of the places a premium on teamwork, product or
entire organization participation and consensus.” project structures
centrally. To accomplish characterized by
overall facilitation a low degree of
and coordination, the “A dynamic, entrepreneurial and It is thus a The Vision formalization, Market Growth path and Trajectory (A)
Prospector
Prospector’s structure- creative place to work. People stick perfect culture Setter (Rule decentralized Prospector: Remark: This coincides with
process mechanisms their necks out and take risks. The for a Market breakers) control, lateral as The strategy the Market Prospector’s goal : i.
must be ‘organic’ “. leaders are considered to be innovators Prospector well as vertical is to find How to locate and exploit new
and risk takers. The glue that holds the as it provides communications and exploit market opportunities.
organization together is commitment the cultural and so on.” new market ii. “How to avoid long-term
to experimentation and innovation. solution to its opportunities. commitments to a single
The emphasis is on being on the administrative technological process”.
Adhocracy leading edge. The organization’s problem.
long-term emphasis is on growth and
acquiring new resources. Success
means gaining unique and new
products or services. Being a product
or service leader is important. The
organization encourages individual
initiative and freedom.”
For co-
Model
Organizational Archetype
Culture
Result
Culture)
BV
SA
α1 (for
α2 (for
α3 (for
BVx)
SA)
T (Criterion 2)
(Criterion 1)
RSBVx2
Crietrion3
Preferred
spec.
constraining the small negative error variance to very small positive variance (0.001)
References
Andrews, R., Boyne, G.A., Law, J. and Walker, R.M. (2009), Strategy formulation, strategy content and performance:
An empirical analysis. Public Management Review, 11 (1), 1-22.
Arnold, M.J. & Reynolds, K.E. (2003), Hedonic shopping motivations. Journal of retailing, 79(2), 77-95.
Ashkenas, R. (2011), Solving the Rubik’s Cube of organizational structure. Harvard Business Review.
Cameron, K.S. & Quinn, R.E. (2011), Diagnosing and changing organizational culture: Based on the competing values
framework. John Wiley & Sons.
Churchill Jr, G.A. (1979), A paradigm for developing better measures of marketing constructs. Journal of Marketing
Research, 64-73.
Conant, J.S., Mokwa, M.P. and Varadarajan, P.R. (1990), Strategic types, distinctive marketing competencies and
organizational performance: a multiple measures‐based study. Strategic Management Journal, 11 (5), 365-383.
Costello, A.B. & Osborne, J.W. (2005), Best practices in exploratory factor analysis: Four recommendations for getting
the most from your analysis. Practical assessment, research & evaluation, 10(7), 1-9.
Dao, V., Langella, I. and Carbo, J. (2011), From green to sustainability: Information Technology and an integrated
sustainability framework. The Journal of Strategic Information Systems, 20 (1), 63-79.
Doty, D.H. and Glick, W.H. (1994), Typologies as a unique form of theory building: Toward improved understanding
and modeling. Academy of Management Review, 19 (2), 230-251.
Finstad, K. (2010), Response interpolation and scale sensitivity: Evidence against 5-point scales. Journal of Usability
Studies, 5 (3), 104-110.
Hair, J.F., Black, W.C., Babin, B.J., Anderson, R.E. & Tatham, R.L. (2006), Multivariate data analysis (Vol. 6).
Hambrick, D.C. (2003), On the staying power of defenders, analyzers and prospectors. The Academy of Management
Executive, 17 (4), 115-118.
Hart, S.L. & Milstein, M.B. (2003), Creating sustainable value. Academy of Management Perspectives, 17(2), 56-67.
Hart, S.L. & Quinn, R.E. (1993), Roles executives play: CEOs, behavioral complexity and firm performance. Human
relations, 46(5), 543-574.
Janićijević, N. (2013), The mutual impact of organizational culture and structure. Economic annals, 58(198), 35-60.
Kopleman, R.E. and Prottas, D.J. (2012), Rational and Validity Evidence for the Cube One Framework. Journal of
Managerial Issues, 27-46.
Miles, R.E., Snow, C.C., Meyer, A.D. & Coleman Jr, H.J. (1978), Organizational strategy, structure and process. Academy
of management review, 3(3), 546-562.
Nunnally, J.C.B. (1994), Psychometric Theory, McGraw-Hill, New York, NY.
Quinn, R.E. and Rohrbaugh, J. (1983), A spatial model of effectiveness criteria: Towards a competing values approach
to organizational analysis. Management Science, 29 (3), 363-377.
Tabachnick, B.G. and Linda, S.F. (2012). Using Multivariate Statistics. Pearson Education Limited.
Venkatraman, N. (1989), The concept of fit in strategy research: Toward verbal and statistical correspondence. Academy
of Management Review, 14 (3), 423-444.
Xu, S., Cavusgil, S.T. and White, J.C. (2006), The impact of strategic fit among strategy, structure and processes on
multinational corporation performance: A multimethod assessment. Journal of International Marketing, 14
(2), 1-31.
Geovanny Perdomo-Charry
School of Business, CEIPA University, Calle 77 Sur No. 40–165,
Medellin, Antioquia, Colombia
E-mail: geovanny.perdomo@ceipa.edu.co
Nelson Lozada Barahona
Faculty of Administrative Sciences, Universidad de Antioquia,
Calle 67 No. 53 – 108, Medellín, Antioquia, Colombia,
E-mail: nelson.lozada@udea.edu.co
Abstract
Colombia is a country that has achieved important growth in innovation in its services and industrial sector.
However, both research and empirical evidence about its development is very limited. Innovation based on
firms’ capacity of transformation and exploitation is one of the main keys to acquisition and exploitation of
open innovation. This empirical study analyses the relationship between absorptive capabilities and acquisition
and exploitation open innovation capabilities in a sample of 123 organizations situated in the city of Medellin,
Colombia. The findings show that firms developing absorptive capabilities may have better probabilities to improve
their open innovation acquisition and exploitation. This study suggests that companies where managers motivate
their employees to use external information and external knowledge in the innovation process may have a better
chance of improving their innovation performance.
Keywords: Absorptive Capabilities, Open Innovation Acquisition, Open Innovation Exploitation, SEM, Colombia
1. Introduction
In the field of organizational analysis, absorptive capabilities (AC) and open innovation (OI) are
already accepted as relevant concepts. In the first, the importance lies in the possibility of generating
new knowledge that is pertinent for the present and future of organizations from a real and potential
perspective. This development has been possible because studies that deal with this capacity, besides
being two-dimensional, is multidimensional (Arbussa and Coenders, 2007; Grimpe and Sofka, 2009;
Lane et al., 2006; Malhotra et al., 2015; Nieto and Quevedo, 2005; Zahra and George, 2002).
OI, on the other hand, is summarized by Cepeda and Arias as “the intentional use of internal
and external knowledge flow to accelerate internal innovation (Chesbrough et al., 2008;
Chesbrough, 2012; Popa et al., 2017). OI includes two capabilities: exploitation and acquisition
(Huizingh, 2011). Exploitation refers to the intentional flow of knowledge to take advantage of
internal developments or innovations outside the company. This includes co-exploitation with
external partners through mechanisms such as venturing and outward licensing of intellectual
property. On the other hand, acquisition has relation with the innovation activities necessary
to obtain knowledge from external sources and co-create it with external partners. This aims at
improving the company’s current technological capabilities using mechanisms such as customer
involvement, external networking, external participation, outsourcing R&D and inward licensing
of intellectual property (Van de Vrande et al., 2009)” (2018, p. 6).
Furthermore, in the literature of the first decade of the XXI century it is observed that AC and OI
are associated to different levels of the organization and its environment; even for Perdomo-Charry,
et al., “the construct of AC is made up of four first-order variables: (1) acquisition, (2) assimilation,
(3) transformation, and (4) exploitation (Camisón and Forés, 2010; Kostopulos et al., 2011; Flatten
et al., 2011a, Flatten et al., 2011b; Engelen et al., 2014; and Enkel and Heil, 2014)” (2017a, p. 9).
Meanwhile, for Van de Vrandea, De Jongb, Vanhaverbekec and Rochemontd, “OI is a broad concept
encompassing different dimensions. Following the definition mentioned earlier, most studies
distinguish between purposive outflows and inflows of knowledge to accelerate internal innovation
processes and to better benefit from innovative efforts, respectively (e.g. Chesbrough et al., 2006;
Chesbrough and Crowther, 2006). Purposive outflows of knowledge, or technology exploitation,
implies innovation activities to leverage existing technological capabilities outside the boundaries
of the organization. Purposive inflows, which we will refer to as technology exploration, relates to
innovation activities to capture and benefit from external sources of knowledge to enhance current
technological developments. In a fully open setting, firms combine both technology exploitation and
technology exploration in order to create maximum value from their technological capabilities or
other competencies (Chesbrough and Crowther, 2006; Lichtenthaler, 2008)” (2009, p 424).
The researches adopt the more novel academic work focus of Cepeda and Arias-Pérez “that centre
the relevant of collaborative work and of the use of external resources that are implicit in the open
innovation capabilities (OIC). For another, this AC implies external embeddedness, which is usually
approached mainly from the network theory in the international business literature; however, this
study offers a more interesting study focus in which externally oriented organizational abilities such
as open innovation is more important for external embeddedness than are the size and quality of the
external network” (2018, p. 1). The previous claims are supported by the limited empirical evidence
resulting from this relationship. For this reason, the aim of this study is to analyse the effect of AC
on acquisition and exploitation of OIC in a significant sample of organizations in Medellín.
general scales related to organizational learning (Zacharia et al., 2011; Whitehead et al., 2016).
However, they do not directly capture a firm’s capability to implement and apply knowledge
(Lane et al., 2006; Roberts et al., 2012), nor do they reflect the richness of the construct
(Volberda et al., 2010).
Perdomo-Charry, et al. raises that “According to Zahra and George (2002), AC are conceived as
the ability of an organization to generate processes, routines and business dynamics that facilitate
generation of value based on knowledge acquired in the external environment of the company. This is
done through acquisition, assimilation, transformation and exploitation. These are multidimensional
variables which facilitate an approach to the four dimensions from different viewpoints (Table 1)”
(2017b, p. 10).
Table 1: Definitions of the Dimensions of Absorptive Capabilities (AC)
Dimension Definition
Acquisition capacity It refers to the possibility of obtaining knowledge from sources external to the company.
It is associated with the possibility that the new external knowledge is understood and learned by
Assimilation capacity
the members of the company.
Transformation It is given by combining the two previous capabilities to create new knowledge that is useful for
capacity generating value in the company.
It refers to the development of routines that allow the generation of new processes, products
Exploitation capacity and systems that strengthen current capabilities, or which allow for the development of new
capabilities in the company.
Source: Perdomo-Charry (2017b, p. 10), based on Zahra and George (2002), Jansen (2005) and Volberda et al. (2010).
For Perdomo-Charry, et al. “These authors have featured AC as a dynamic ability related to the
creation and use of knowledge, in which both processes are oriented to increasing the capacity
of a firm to maintain and create comparative advantages; all of this by means of the development
of other organizational capabilities or arrays of organizational routines and processes such as
marketing, distribution and production, through which firms acquire, assimilate, transform and
exploit knowledge” (2017b, p. 13).
Perdomo-Charry, et al. Submits that “The work of Zahra and George (2002) has allowed several
authors (Jansen et al., 2005; Volberda, Foss and Lyles, 2010; Zhang et al., 2015) to advance and
deepen their studies on how organizational management affects the realized and potential absorptive
capacity” (2017b, p, 13). On the other hand, it has made possible for other authors to work on
both capacities separately, potential absorptive capacity (Fosfuri and Tribó, 2008) and realized
absorptive capacity (Flatten, et al., 2011a and 2011b), on the effect of potential absorptive capacity
on the opening to new changes or organizational knowledge (Liao, Welsch and Stoica, 2003) and
on innovation performance (Fosfuri and Tribó, 2008; Flatten, et al., 2011a), compatibility and
innovation (Sanez et al., 2014).
Studies also report that AC positively moderate the relationships between manufacturing
flexibility and firm performance (Patel et al., 2012), between E-purchasing tools and category
performance (Kauppi et al., 2013) and between supplier involvement and agile product innovation
(Tavani et al., 2014). Other works report that the effect of AC is moderated by environmental
conditions such as complexity (Setia et al., 2013), uncertainty (Sanez et al., 2014) and appropriability
regime (Ritala and Hurmelinna-Laukkanen, 2013). However, there is a lack of empirical studies on
how AC interact with OIC.
a new technology completely on their own. Technological challenges and financial constraints push
independent organisations or even competitors, to collaborate. With progression in technology, more
interdisciplinary subjects have emerged. Therefore, a different innovation environment started to
form, which Chesbrough (2003) later called -open innovation-” (2018, p. 77).
Previous authors also point out that “Christensen (2006) argued that, although external
knowledge can become more accessible, companies should not abandon their core technologies.
Knowledge and knowhow regarding organisations’ core competitiveness, as well as in-depth R&D,
should be maintained within the companies. But most of the research focuses on the technological
outcomes from openness and financial performance, as an indicator of value capture from open
innovation. Chesbrough’s study discovered that external forces can enhance the efficiency of
projects, and shorten working time, which can make a difference for short-term projects in particular.
Yet, an over-dependence on external R&D may have a crowding-out effect on long-term innovation
programmes” (Si Zhang, et al., 2018, p. 77).
Chesbrough defined open innovation (OI) as an organization that “uses external ideas as well as
internal ideas, and internal and external paths to market” (2003, p. 34). Lichtenthaler also referred
to the OI approach as “systematically relying on a firm’s dynamic capabilities of internally and
externally carrying out the major technology management tasks, technology acquisition and
technology exploitation, along the innovation process.” (2008, p. 148). The adoption of OI strategies
lies on a continuum. At one end are those companies with entirely closed innovation, whereas at the
other end are those companies with fully open approaches to innovations.
This study identifies the two core OI processes (Chesbrough’s, 2003, p. 17): first, External
Technology Acquisition (ETA, also termed inbound open innovation or acquisition open innovation);
and second, External Technology Exploitation (ETE, also termed outbound open innovation or
exploitation open innovation), for creating economic value (Chesbrough, et al., 2006; Chesbrough
and Crowther, 2006; Chesbrough and Garman, 2009; Dodgson, et al., 2006; Enkel, et al., 2009;
Lichtenthaler, 2008, 2009b; Spithoven, et al., 2010).
For Hung and Chou “ETA assesses the degree to which a company accesses available external
technologies to complement the ones it already possesses. This process allows firms to acquire
technological knowledge from suppliers, customers, and external knowledge sources to enrich
their knowledge base (Grant and Baden-Fuller, 2004). ETE refers to a firm’s purposive pursuit of
commercialization or outward transfer of its technological knowledge to outside firms to obtain
monetary or non-monetary benefits (Lichtenthaler, 2009b)” (2013, p. 369).
Previous research has divided OI into ‘outside-in’ and ‘inside-out’ processes (Enkel et al., 2009).
This paper focuses on the two processes and investigates its associations with AC. Organisations,
especially those in developing countries such as Colombia, perform more inbound than outbound
OI. The inbound strategy may take the form of technology purchases, inter-companies R&D
collaborations, technological spinoffs, and user-driven innovation (Huston and Sakkab, 2006;
Waites and Dies, 2006; Kim et al., 2008; Piller, 2011). Here, we specifically focus on the effect
of AC on OIC. It is well recognized that AC play an important role in open innovation, but what
contributes to success and whether a company can profit from purchased technology still need to be
identified (Gassmann et al., 2010).
In accordance with Naqshbandi and Tabche “As OI deals with the inflows and outflows of knowledge
that involve knowledge exploration and exploitation (Xia and Roper, 2016), it requires human capital
that is capable of selecting, acquiring, transforming and utilizing knowledge for innovative purposes
(Tirabeni, et al., 2015). Hence, open innovation requires leaders who can effectively manage human
capital (Lee and Cole, 2003; Lerner and Tirole, 2001).
West and Bogers (2017) contend that the open innovation activity of an organization is interpreted,
decided and implemented by its employees. In this context, empowering leadership fosters creativity
and flexibility among followers, resulting in “very high innovation” through followers’ development
and self-confidence (Sims et al., 2009). Empowerment is one of the crucial factors for achieving
innovative outcomes (Sok and O’Cass, 2015)” (2018, p. 156).
Absorptive Capabilities and Acquisition and Exploitation of Open Innovation
Zhang, Zhao and Lyles pose that “Researchers find that AC positively influence knowledge transfer
(Lawson and Potter, 2012; Whitehead et al., 2016), innovation (Cepeda-Carrion et al., 2012; Ritala
and Hurmelinna-Laukkanen, 2013), manufacturing capabilities (Tu et al., 2006; Zhang et al., 2015)
and business performance (Francalanci and Morabito, 2008; Nagati and Rebolledo, 2012).
In addition, empirical evidence exists that AC mediate the relationships between information
systems and business performance (Francalanci and Morabito, 2008; Liu et al., 2013; Setia and
Patel, 2013; Iyengar et al., 2015) and between organisational compatibility and innovation
(Saenz et al., 2014).” (2018, p. 5).
They also emphasize that “Researchers also report that AC positively moderate the relationships
between manufacturing flexibility and firm performance (Patel et al., 2012), between E-purchasing
tools and category performance (Kauppi et al., 2013) and between supplier involvement and agile
product innovation (Tavani et al., 2014); and the effect of AC is moderated by environmental
conditions such as complexity (Setia et al., 2013), uncertainty (Saenz et al., 2014) and appropriability
regime (Ritala and Hurmelinna-Laukkanen, 2013)” (Zhang et al., 2018, p. 6). However, there is a
lack of empirical studies on how AC affect OIC.
For AC to influence OIC, specifically on the creation of value using the four dimensions of AC, it
is necessary to make OI acquisition and exploitation capabilities converge to fulfill this purpose.
In the case of contexts with too much turbulence, the internal ability to align AC with the changing
market requirements demands from the company to have developed the capability to co-create and
co-exploit new technological information uses with external partners (Hung and Chou, 2013).
With them, the company can reach economies of scale and technological complementarities and
in this way react agilely when the competition launches new products to update service portfolios
(Overby et al., 2006; Schweitzer et al., 2011; Chesbrough, 2012; Popa et al., 2017). Furthermore,
both OI capabilities play an important role in the relationship between AC because the internal
ability to foresee new technological information that could affect the company’s business must be
complemented with the capability to do so with external partners. These partners understand the
future of technological information and this complements the company’s internal vision and its own
capability to absorb new technological information.
At the early stage of openness, companies are capable to handle external knowledge to
commercialize it for profit; however, with more technology purchased, organisations are faced
with a more complicated knowledge integration and transformation process, which could
largely increase the cost of openness, and at the same time, reduce the benefit of open innovation
(Koput, 1997; Laursen and Salter, 2006). From a perspective of trade-off between the benefits and cost
of open innovation, it could become generally accepted that the degree of open innovation should have
a marginal value, beyond which open innovation has a negative impact on the company’s profitability.
For Zhang et al. “In addition to the purchasing expenditure, other non-monetary costs are often
incurred in the process of searching, evaluating and filtering proper external technology, assimilating
and integrating the purchased technology, and transforming and commercialising external technology
to the markets (West and Bogers, 2014; Salge et al., 2013)” (2018, p. 78). As a result, knowledge
access exceeds the benefits of OIC and the profit of the companies are gradually reduced. Therefore,
we expect that:
H1: Absorptive capabilities positively influence the Open innovation capability of acquisition.
Knowledge is a strategic resource and the capabilities in knowledge absorption and development
have persisting effects on innovation (Hult et al., 2006, Lane et al., 2006). Trust among employees
enhances OIC by facilitating cooperation and collaboration among internal -marketing, production
and R&D departments-and external areas (Swink and Song, 2007). Information systems provide
a platform and tools that facilitate employees and stakeholders to process information and make
decisions related to new product development quickly (Liu et al., 2013).
It is the new knowledge and new applications of existing knowledge developed through
cross-functional collaboration and by using information systems that lead to product innovation
(Nonaka, 1994; Nahapiet and Ghoshal, 1998). Hence, this study argues that AC, which enable a
manufacturer to acquire and implement knowledge, mediate the effects of trust and information
systems on product innovation. Application helps employees implement new knowledge and
suggestions obtained from both external and internal stakeholders to develop open innovation
(Zhang et al., 2015). Thus, the AC components jointly enable a manufacturer to take advantage
of existing knowledge and develop new knowledge, enhancing open innovation. Therefore, the
following hypothesis is proposed.
H2: Absorptive capabilities positively influence the Open innovation capability of exploitation.
Definitely, OIC require the support of the AC dimensions to be able to affect IO, especially in
contexts with high turbulence, because the capability to react agilely demands resources that are
beyond organizational limits. In the case of OIC, taking advantage of external partners’ knowledge
and competencies facilitates the interpretation of the information that services capture. This will
allow companies to respond agilely to context changes; more specifically, it will allow companies to
adjust prices and update and customize the product and service portfolio among other possibilities.
Therefore, this study proposes the following hypotheses (see Figure 1):
3. Methodology
Equations by the consistent least squares method (PLSc) were used with the aim of examining
the reliability and validity of the measurement model (Dijkstra and Henseler, 2015). The Dijkstra-
Henseler (pA) construct reliability indicator was applied, verifying that it was above 0.7. Additionally,
the Cronbach’s Alpha (CA) and the Dillon-Goldstein’s (pC) index, which is related to the composite
reliability, were verified, confirming that they were above 0.7. For the case of the variance extracted
index (VEI), it was corroborated that it was greater than 0.5.
Fornell-Larcker
Construct
1 2 3
1. AC 0.97
2. OI - acquisition 0.81 0.98
3. OI - exploitation 0.74 0.91 0.92
VEI on the diagonal; squared correlations below the diagonal.
4. Results
The structural equations results show that AC have a positive and significant influence on the OI
acquisition capability (β = 0.81, t-values = 3.39), which leads to accepting H1 in the study. Besides,
it is observed that AC also have a positive and significant influence on the OI exploitation capability
(β = 0.75, t-values = 3.29), which leads us to accept H2. Additionally, it is observed that the control
variables do not have significant influence.
Table 6: Structural Equations Results
The results also provide a holistic picture on the complex relationships between an AC construct and
OIC processes. The two items of the OI exploitation capability construct that reported high loadings
were: You have a dedicated unit (i.e., promoters, gatekeepers) to transfer and commercialization
of current knowledge (e.g., spin-off, selling, or cross-licensing patents); We seldom co-exploit
technology with external organizations (Spithoven, et al., 2010).
Third, this study finds that AC affect OIC on product innovation, providing insights into how
to fully capitalize the relationships among the organizations and stakeholders for new product
development (Swink and Song, 2007, Roberts et al., 2012). The results show that both OI
acquisition and exploitation capabilities improve new product development indirectly through AC,
which enhances current understandings of how OIC and AC interact to affect product innovation
(Hotho et al., 2012, Saenz et al., 2014, Marabelli and Newell, 2014). This study also reveals that
a relationship exists among AC, OIC and product innovation, suggesting that a firm should jointly
design its organizational systems and knowledge management processes to support new product
development (Lane et al., 2006, Mazzola et al., 2015b).
While this study makes significant theoretical and practical contributions, it has limitations that open
up avenues for future research. First, we conduct this study in Colombia. The relationships among
AC and OIC might be influenced by the Colombian business, cultural and institutional environments.
Future research could examine the research model in other countries to generalize the findings.
Second, this study tests the research model using cross-sectional data. Researchers argue that OIC
may influence AC (Cohen and Levinthal, 1990; Zahra and George, 2002; Xia and Roper, 2016;
Zhang et al., 2018) and an organizational environment promoting innovation may improve trust
among employees (Adler and Kwon, 2002) and stakeholders (Zhang et al., 2018). Future research
could extend the study by using a longitudinal design to investigate the evolution and dynamics
among AC and OIC. Third, this study may have the problem of endogeneity because some
uncontrolled confounders may affect both independent and dependent variables of the model, which
is a limitation.
Fourth, researchers argue that relational embeddedness in an innovation network positively influences
AC (Mazzola et al., 2015b). Fifth, this study focuses on both acquisition and exploitation of open
innovation. Researchers argue that OIC are associated with exploitative and exploratory learning
respectively (Hargadon and Sutton, 1997; Katila and Ahuja, 2002) and a firm’s AC may employ
different levels of exploitation and exploration (Lane et al., 2006). Future studies could investigate
how different types of AC influence product innovation and organization’s performance. Sixth, this
study does not consider internal R&D investments, which is a limitation (Cohen and Levinthal, 1990).
Future studies could examine the impacts of internal R&D investments on acquisition, assimilation,
transformation and exploitation processes.
6. Acknowledgements
This article is the product of the research project: “Effect of co-creation of value and co-innovation
on innovative performance in SMEs of Medellín-Antioquia”, which was financed by the
CODI-Committee for the Development of the Research-from the University of Antioquia and the
CEIPA University, during the years 2017-2018.
References
Adler, P.S. and Kwon, S. (2002), Social capital: Prospects for a new concept. Academy of Management Review, 27(1), 17-40.
Arbussa, A. and Coenders, G. (2007), Innovation activities, use of appropriation instruments and absorptive capacity:
Evidence from Spanish firms. Research Policy, 36(10), 1545-1558.
Bligh, M.C., (2017), The role of trust in leader-follower relationships. In: Marques, S., J.F.D. (Ed.), Leadership
Today-Practices for Personal and Professional Performance. Springer Texts in Business and Economics.
http://dx.doi.org/10.1007/978-3-319- 31036-7_2.
Burke, C.S., Stagl, K. C., K., C., Goodwin, G.F., Salas, E. and Halpin, S.M. (2006), What type of leadership behaviors
are functional in teams? A meta-analysis. The Leadership Quarterly, 17 (3), 288–307.
Camisón, C. and Forés, B. (2010), Knowledge absorptive capacity: New insights for its conceptualization and
measurement. Journal of Business Research, 63(7), 707–715.
Castellacci, F. (2011), Closing the technology gap? Review of Development Economics, 15(1), 180-197.
Cepeda, J. and Arias-Pérez, J. (2018), Information technology capabilities and organizational agility: The mediating
effects of open innovation capabilities, Multinational Business Review, https:// doi.org/10.1108/MBR-11-
2017-0088.
Cepeda-Carrion, G., Cegarra-Navarro, J.G. and Jimenez-Jimenez, D. (2012), The effect of absorptive capacity on
innovativeness: Context and information systems capability as catalysts, British Journal of Management,
23(1), 110- 129.
Cepeda, J. and Arias-Pérez, J. (2018). Information technology capabilities and organizational agility: The mediating
effects of open innovation capabilities., Multinational Business Review, https:// doi.org/10.1108/MBR-11-
2017-0088.
Chesbrough, H.W. (2003), Open Innovation: The New Imperative for Creating and Profiting from Technology. Harvard
Business School Press, Cambridge.
Chesbrough, H., Vanhaverbeke, W., and West, J. (2006), Open Innovation: Researching a New Paradigm. Oxford
University Press, Oxford.
Chesbrough, H. and Crowther, A.K. (2006), Beyond high tech: early adopters of open innovation in other industries,
R&D Management 36(3), 229–236.
Chesbrough, H. and Garman, A.R. (2009). How open innovation can help you cope in lean times, Harvard Business
Review, 87(12), 68–76.
Chesbrough, H. (2012), Open innovation: where we’ve been and where we’re going, Research Technology Management,
55(4), 20-27.
Christensen, J.F. (2006), Wither core competency for the large corporation in an open innovation world. Open
Innovation: Researching a New Paradigm. pp. 36 Oxford.
Cohen, J. (1988), Statistical power analysis for behavioral sciences, Hillsdale, NJ, USA: Erlbaum.
Cohen, W.M. and Levinthal, D.A., (1990), Absorptive capacity: a new perspective on learning and innovation.
Administrative Science Quarterly, 35, 128–152.
Dodgson, M., Gann, D. and Salter, A. (2006), The role of technology in the shift towards open innovation: the case of
Proctor and Gamble, R&D Management, 36 (3), 333–346.
Dijkstra, T. and Henseler, J. (2015), Consistent partial least squares path modelling, MIS quarterly, 39(2), 297-316.
Engelen, A., Kube, H., Schmidt, S. and Flatten, T.C. (2014). Entrepreneurial orientation in turbulent environments: The
moderating role of absorptive capacity, Research Policy, 43(8), 1353–1369.
Enkel, E., Gassmann, O. and Chesbrough, H. (2009), Open R&D and open innovation: exploring the phenomenon, R&D
Management, 39(4), 311–316.
Enkel, E. and Heil, S. (2014), Technovation Preparing for distant collaboration: Antecedents to potential absorptive
capacity in cross-industry innovation, Technovation, 34(4), 242–260.
Eurostat (2009), ‘High-technology’ and ‘knowledge based services’ aggregations based on NACE Rev. 2. Recuperado de:
https://okonomibarometer.nho.no/getfile.php/Filer/Diverse%20statistikk%20i%20excel/htec_esms_an3.pdf
Felipe, C.M., Roldán, J.L. and Leal-Rodríguez, A.L. (2016), An explanatory and predictive model for organizational
agility, Journal of Business Research, 69(10), 4624-4631.
Flatten, T.C., Engelen, A., Zahra, S.A., and Brettel, M. (2011a), A measure of absorptive capacity: Scale development
and validation, European Management Journal, 29(2), 98–116.
Flatten, T.C., Greve, G.I. and Brettel, M. (2011b), Absorptive Capacity and Firm Performance in SMEs: The Mediating
Influence of Strategic Alliances, European Management Review, 8(3), 137–152.
Fornell, C. and Larcker, D. (1981), Evaluating structural equation models with unobservable variables and measurement
error, Journal of marketing research, 18(1), 39-50.
Fosfuri, A. and Tribo, J. (2008), Exploring the antecedents of potential absorptive capacity and its impact on innovation
performance, Omega, 36(2), 173–187.
Francalanci, C. and Morabito, V. (2008), IS integration and business performance: The mediation effect of organizational
absorptive capacity in SMEs, Journal of Information Technology, 23(4), 297-312.
Gassmann, O., Enkel, E. and Chesbrough, H.W. (2010), The future of open innovation, R&D Manage, 40 (3), 213–221.
Grant, R.M. and Baden-Fuller, C. (2004), A knowledge accessing theory of strategic alliances, Journal of Management
Studies, 41 (1), 61–84.
Grimpe, C. and Sofka, W. (2009), Search patterns and absorptive capacity: Low-and high-technology sectors in
European countries, Research Policy, 38(3), 495–506.
Hargadon, A. and Sutton, R.I. (2000), Building an innovation factory, Harvard Business Review, 78(3), 157-166.
Hotho, J.J., Becker-Ritterspach, F. and Saka-Helmhout, A. (2012), Enriching absorptive capacity through social
interaction, British Journal of Management, 23(3), 383-401.
Hoskisson, R., Eden, L., Lau, C. and Wright, M. (2000), Strategy in emerging economies, Academy of Management
Journal, 43(3), 249-267.
Hult, G.T.M., Ketchen, J.D.J., Cavusgil, S.T. and Calantone, R.J. (2006), Knowledge as a strategic resource in supply
chains, Journal of Operations Management, 24(5), 458-475.
Hung, K.P. and Chou, C. (2013), The impact of open innovation on firm performance: the moderating effects of internal
R&D and environmental turbulence, Technovation, 33(10), 368-380.
Huston, L. and Sakkab, N. (2006), Connect and develop: inside procter & gamble’s new model for innovation. Harvard
Business Review, 84(3), 58–66.
Jansen, J.J.P., Van Den Bosch, F.A.J. and Volberda, H.W. (2005), Managing potential and realized absorptive capacity:
How do organizational antecedents matter?, Academy of Management Journal, 48(6), 999–1015.
Katila, R. and Ahuja, G. (2002), Something old, something new: A longitudinal study of search behavior and new
product development, Academy of Management Journal, 45(6), 1153-1194.
Khazanchi, S., Lewis, M.W. and Boyer, K.K. (2007), Innovation-supportive culture: the impact of organizational values
on process innovation, Journal Operational Management, 25(4), 871–884.
Kauppi, K., Brandon-Jones, A., Ronchi, S. and van Raaij, E.M. (2013), Tools without skills: Exploring the moderating
effect of absorptive capacity on the relationship between E-purchasing tools and category performance,
International Journal of Operations & Production Management, 33(7), 828-857.
Kim, S.K., Ahn, D.H., Song, J.G., Lee, J.W., Bae, Y.H. and Jun, J.Y. (2008), Building Open Innovation System: Theory,
Practice and Policy Implication. STEPI, Seoul.
King, W.R. and Flor, P. (2008), The development of global IT infrastructure, Omega, 36(3), 486-504.
Koput, K.W. (1997), A chaotic model of innovative search: some answers, many questions. Organization Science, 8(5),
528–542.
Kostopoulos, K., Papalexandris, A., Papachroni, M., and Ioannou, G. (2011), Absorptive capacity, innovation, and
financial performance, Journal of Business Research, 64(12), 1335–1343.
Lane, P.J., Koka, B.R., Pathak, S., Lane, P.I. and Thak, S.P. (2006), The reification of absorptive capacity: a critical
review and rejuvenation of the construct, The Academy of Management Review, 31(4), 833–863.
Laursen, K. and Salter, A. (2006), Open for innovation: the role of openness in explaining innovation performance
among UK manufacturing firms, Strategic Management Journal, 27(2), 131–150.
Lawson, B., and Potter, A. (2012), Determinants of knoweldge transfer in inter-firm new product development projects,
International Journal of Operations & Production Management, 32(10), 1228-1247.
Lee, G.K. and Cole, R.E. (2003), From a firm-based to a community-based model of knowledge creation: the case of the
Linux kernel development, Organization Science, 14(6), 633–649.
Lerner, J. and Tirole, J. (2001) The open source movement: key research questions, Europe Economic Review, 45(4),
819–826.
Liao, J., Welsch, H. and Stoica, M. (2003), Organizational absorptive capacity and responsiveness: an empirical
investigation of growth‐oriented SMEs, Entrepreneurship Theory and Practice, 28(1), 63-85.
Liu, H., Ke, W., Wei, K.K., and Hua, Z. (2013), The impact of IT capabilities on firm performance: The mediating roles
of absorptive capacity and supply chain agility, Decision Support Systems, 54(3), 1452-1462.
Lichtenthaler, U. (2008), Open innovation in practice: an analysis of strategic approach to technology transactions, IEEE
Transactions on Engineering Management, 55(1), 148–157.
Lichtenthaler, U. (2009b), Outbound open innovation and its effect on firm performance: examining environmental
influences, R&D Management, 39(4), 317–330.
Marabelli, M. and Newell, S. (2014), Knowing, power and materiality: A critical review and reconceptulizatoin of
absorptive capacity, International Journal of Management Reviews, 16(4), 479-499.
Malhotra, A., Gosain, S. and Sawy, O.A. El. (2015), Absorptive Capacity Configurations for Partner Gearing Supply
Chains, Enabled Market Knowledge, 29(1), 145–187.
Mazzola, E., Bruccoleri, M. and Perrone, G. (2015b), Supply chain of innovation and new product development, Journal
of Purchasing & Supply Management, 21, 273-284.
Mowery, D.C., Oxley, J.E. and Silverman, B.S. (1996), Strategic alliances and interfirm knowledge transfer, Strategic
Management Journal, 17 (Winter special issue), 77–91.
Nahapiet, J. and Ghoshal, S. (1998), Social capital, intellectual capital, and the organizational advantage, Academy of
Management Review, 23(2), 242-266.
Nagati, H. and Rebolledo, C. (2012), The role of relative absorptive capacity in improving suppliers’ operational
performance, International Journal of Operations & Production Management, 32(5), 611-630.
Nieto, M. and Quevedo, P. (2005), Absorptive capacity, technological opportunity, knowledge spillovers, and innovative
effort, Technovation, 25(10), 1141–1157.
Nonaka, I. (1994), A dynamic theory of organizational knowledge creation, Organization Science, 5(1), 14-37.
Overby, E.A., Bharadwaj, A. and Sambamurthy, V. (2006), Enterprise agility and the enabling role of information
technology, European Journal of Information Systems, 15(2), 120-131.
Patel, P. C., Terjesen, S. and Li, D. (2012), Enhancing effects of manufacturing flexibility through operational absorptive
capacity and operational ambidexterity, Journal of Operations Management, 30(3), 201-220.
Perdomo-Charry, G., Lozada, N. and Zuñiga-Collazos, A. (2017a). The Effect of Exploitation Capacities on
Organizational Performance: An Empirical Analysis. Mediterranean Journal Social Sciences, Vol. 6, No. 8,
November, 2017, Pp. 9-16, DOI: 10.1515/mjss-2017-0037, Italy.
Perdomo-Charry, G., Lozada, N. and Zuñiga-Collazos, A. (2017b). Absorptive Capacity (AC): knowledge generation
and its evolution from variable to construct. Revista Espacios, Vol. 38, No. 36, Páginas 10-29, diciembre,
2017, ISSN: 0798-1015, Venezuela.
Piller, F. (2011), Open innovation with customers: co-creation at threadless. In: Sloane, P. (Ed.), A Guide to Open
Innovation and Crowdsourcing, Kogan Page, London.
Popa, S., Soto-Acosta, P. and Martinez-Conesa, I. (2017), Antecedents, moderators, and outcomes of innovation climate
and open innovation: an empirical study in SMEs”, Technological Forecasting and Social Change, 118,
134-142.
Ritala, P. and Hurmelinna-Laukkanen, P. (2013), Incremental and radical innovation in coopetition—the role of
absorptive capacity and appropriability, Journal of Product Innovation Management, 30(1), 154-169.
Roberts, N., Galluch, P. S., Dinger, M. and Grover, V. (2012), Absorptive capacity and information systems research:
Revew, synthesis, and directions for future research, MIS Quarterly, 36(2), 625-648.
Sanez, M.J., Revilla, E., and Knoppen, D. (2014), Absorptive capacity in buyer-supplier relationships: Empirical
evidence of its mediating role, Journal of Supply Chain Management, 50(2), 18-40.
Schweitzer, F.M., Gassmann, O. and Gaubinger, K. (2011), Open innovation and its effectiveness to embrace turbulent
environments, International Journal of Innovation Management, 15(6), 1191-1207.
Setia, P. and Patel, P. C. (2013), How information systems help create OM capabilities: Consequents and antecedents of
operational absorptive capacity, Journal of Operations Management, 31(6), 409-431.
Sims, H.P., Faraj, S. and Yun, S. (2009), When should a leader be directive or ways produce value? Competition,
uncertainty, and domestic vs foreign firms empowering? How to develop your own situational theory of
leadership, Business Horizons, 52(2), 149–158.
Spithoven, A., Clarysse, B., and Knockaert, M. (2010), Building absorptive capacity to organise inbound open innovation
in traditional industries, Technovation, 30(2), 130–141.
Sok, P. and O’Cass, A. (2015). Examining the new product innovation–performance relationship: optimizing the role of
individual-level creativity and attention-to-detail, Industrial Marketing Management, 47, 156–165.
Swink, M. and Song, M. (2007), Effects of marketing-manufacturing integration on new product development time and
competitive advantage, Journal of Operations Management, 25(1), 203-217.
Tavani, S.N., Sharifi, H. and Ismail, H.S. (2014), A study of contingency relationships between supplier involvement,
absorptive capacity and agile product innovation, International Journal of Operations & Production
Management, 34(1), 65-92.
Tirabeni, L., Pisano, P. and Soderquist, K.E. (2015), In: Transitioning Towards Employee-Driven Innovation:
Lessons From Pioneers in the ICT Sector, Paper presented at the European Conference on Innovation and
Entrepreneurship.
Tu, Q., Vonderembse, M.A., Ragu-Nathan, T.S. and Sharkey, T.W. (2006), Absorptive capacity: Enhancing the
assimilation of time-based manufacturing practices, Journal of Operations Management, 24(5), 692-710.
Van de Vrande, V., De Jong, J.P., Vanhaverbeke, W. and De Rochemont, M. (2009), Open innovation in SMEs: trends,
motives and management challenges, Technovation, 29(6-7), 423-437.
Volberda, H.W., Foss, N.J. and Lyles, M.A. (2010), Absorbing the concept of absorptive capacity: How to realize its
potential in the organization field, Organization Science, 21(4), 931-951.
Waites, R. and Dies, G. (2006), Corporate research and venture capital can learn from each other, Research Technology
Management, 49(2), 20–24.
West, J. and Bogers, M. (2017), Open innovation: current status and research opportunities, Innovation Organization
Management, 19(1), 43–50.
Whitehead, K.K., Zacharia, Z.G., and Prater, E.L. (2016), Absorptive capacity versus distributive capability: The
asymmetry of knowledge transfer, International Journal of Operations & Production Management, 36(10),
1308-1332.
Xia, T. and Roper, S. (2016), Unpacking open innovation: absorptive capacity, exploratory and exploitative openness,
and the growth of entrepreneurial bio-pharmaceutical firms, Journal Small Business Management, 54(3),
931–952.
Zacharia, Z.G., Nix, N.W. and Lusch, R.F. (2011), Capabilities that enhance outcomes of an episodic supply chain
collaboration, Journal of Operations Management, 29(6), 591-603.
Zahra, S.A. and George, G. (2002), Absorptive capacity: A review, reconceptualization and extension, Academy of
management review, 27(2), 185-203.
Zhang, M., Zhao, X., Lyles, M. and Guo, H. (2015), Absorptive capacity and mass customization capability, International
Journal of Operations & Production Management, 35(9), 1275-1294.
Zhang, M., Zhao, X. and Lyles, M. (2018), Effects of absorptive capacity, trust and information systems on product
innovation, International Journal of Operations & Production Management, 38(2), 493–512.
Zhang, S., Yangb, D., Qiuc, S. Baoc, X. and Li, Z. (2018), Open innovation and firm performance: Evidence from
the Chinese mechanical manufacturing industry, Journal of Engineering and Technology Management, 48,
76–86.
Hadi Nilforoushan
Shahid Beheshti university, Research center for fundamental,
research in science and technology, Iran
E-mail: h_nilforoushan@sbu.ac.ir
Soma Rahmani
Mazandaran university, Faculty of economics,
and administrative sciences, Iran
E-mail: srahmani@umz.ac.ir
Abstracts
Introduction and Purpose: In order to respond to environmental changes, especially technological ones, different
organizations need to use technology intelligence systems. The purpose of these systems is to help decision makers
to make the right technology decisions by collecting, analysing, distributing and using relevant information.
This paper reports a study of designing some sort of standard technology intelligence system in National Iranian Gas
Company in order to enable superior managers and decision makers all over the country to scan their environment
and use the information related to their decisions.
Methodology: Qualitative approach was used and information was collected through semi-structured interviews
with gas company experts and managers. Each respondent was asked to present his/her important decisions. These
decisions were analysed according to the information needs and then technology intelligence system was designed
in a way that can transform information needs to the products required to decision processes.
Findings: This paper suggests a standard system for technology intelligence. This system, like other systems, is
divided into inputs, processes and outputs. Inputs are decision-maker’s technology related information needs,
which are defined precisely in the proposed model. Outputs are also standardized in the three forms of scanning,
monitoring and scouting reports and ultimately the processes, which outputs based on them are provided, have been
introduced.
Contributions: This study can help companies in different sectors to have a standard approach in doing technology
intelligence processes.
Keywords: Technology Intelligence System, Standardization, Technology Scanning, Technology Monitoring,
Technology Scouting, Technology Related Decisions
1. Introduction
policy-makers and decision-makers need to have relevant technological information in order to make
proper decisions. Today, managers and organizations are faced many environmental challenges,
including the speed of environmental changes, the different data from various sources of information,
ambiguous data and increased competition. If companies can’t deal with technological development
trends in their industries, they will face very serious problems. Firms will gradually lose their market
positions (Chesbrough, 2003) when they can’t predict the impact of new technologies and not be able
to innovate. Under such conditions, technology intelligence can be a good solution to these challenges.
Top of FormThrough technology intelligence, decision makers and researchers can identify
different methods, processes and tools to respond environmental changes, the development of
technologies and trends that affect the company’s future competitive position (Ethel, Choo, 1994).
However, how organizations use this technology intelligence to find the right answers is the most
important challenge for organizations. Implementing technology intelligence requires organized
efforts. Different authors have examined the technology intelligence from different perspectives
and introduced various methods and tools for implementing. In the past, many studies focused only
on empirical studies (Utterback and Brown, 1972), as well as reviewing processes of technology
intelligence (Ashton, 1991, Ashton and Stacy, 1995). Whereas, in recent years, with increasing
the importance of implementing TI, more researchers have been interested in studying the
industrial needs for understanding of how this system works. For example, Lichtenthaler
(2003, 2004a, 2004b, 2007) explored the process of doing technology intelligence in multinational
organizations. Besides, Savioz has provided a systematic model for collecting, analyzing and
disseminating information in a technological environment to introduce new opportunities. He and
his colleagues in another paper, has investigated the technology intelligence system in SMEs and
medium-sized companies. (Savioz et al., 2001, Savioz and Blum, 2002). Then, researchers have
changed their studies and interests towards relationships between managers and decision makers
with intelligent of technology (Savioz and Tschirky, 2004, Karshenas et al., 2016). A study by
Mortara and others in 2009 was also devoted to analyze how systems were designed to connect
decision makers to each other and how they use relevant information. Despite many researches on
the subject of technology intelligence, technology intelligence processes, technology intelligence
design and implementation, there are few studies on designing a standard system based on system
inputs (information needs) transform to outputs (Intelligent production) in order to apply by decision
makers. Ethel and Choo (1994) categorized Mintzberg (1973) decision roles to explore how decision
makers use scanned information in the environment. The study determines what information
is needed for what decisions? Which part or parts of the environment should be scanned? And
from what resources this information can be obtained? However, this research also is incomplete,
because the type of outputs and intelligent products that decision makers will need have not been
identified, therefore, it can’t be known as a standard system. The present study seeks to fill this gap.
The main objective of this paper is to examine the technology intelligence as an open system and
its relationship with decision-making systems in the organization. In fact, designing of the standard
system of technology intelligence that meets technological decisions of the organization is the main
objective of the research that researchers are pursuing. The National Gas Company of Iran, which
operates in the dynamic environment of the gas industry and need to identify changes as soon as
possible to respond quickly, is considered as a case in this study.
2. Theoretical Background
The authors of the second school look at the intelligence of technology as a system. Lopez (2002)
considers technology intelligence as a system related to knowledge and technological trends,
identifies key actors and competitor’s actions. Licktenthaler defined technology intelligence a
group of activities related to the collection and analysis of information of technological trends,
which supports the organization’s technological decisions. Lang and Mueller (1997) argued that
the intelligence process involves identifying information needs, selecting sources, collecting data
and analyzing information. This is why he chose a system approach for technology intelligence.
In another study, Escorse and Rodrigues (1998) also agreed with him and considered intelligence
as an analytical work over time. Moreover, according to systematic approach, Davis (1999)
states that working with technology intelligence as a system involves collaborating to do especial
tasks. Castellanos and Torres (2010) suggested a model of technology intelligence that redefines
technology management. It is a dynamic and flexible system that is an integrated tool for technology
management (technology prediction, foresight and roadmap) that is used independently. Since the
1970s, between these perspectives, a systemic approach has been used. Different authors have
become more interested in systematic observation and systematic monitoring of technological trends
(UtterbAck and Brown, 1972, Cooper and Schendel, 1976, Licktenthaler, 2003, 2004b, 2004a, 2007,
Karshenas et al., 2016). This is why the approach of formal technology intelligence system has been
used in this paper.
Not only are these components successive phases, but they are complementary and complement
each other through a complex process of continuous feedback flows.
The technology intelligence system in its organization is a subsystem for other organizational
system, such as the production system, support system (3). In the present article, based on the logic
of the system (input, output and process), to design technology intelligence system has paid special
attention to the principles of the system and its components. In Figure 1, the main components of the
technology intelligence system are shown briefly.
As shown in the figure above, the organization needs some related inputs in order to design a system
of technology intelligence. Identifying key stakeholders and decision makers in the organization
is essential to obtain these information needs. As well as identification needs, sources should be
considered in order to capture the identified information needs. Collected data from sources alone
can’t provide useful information to decision makers; this information should be analyzed and
presented in the form of intelligent products (standard seminar reports, etc.). In the instrumental
approach of technology intelligence, only information about the future of technology was gathered
and no analysis was made on this information. However, in the system approach, not only information
is analyzed and made available to decision makers, but also feedback is received from decision
makers about the nature of the analyzed data and the extent to which data and intelligent products
are relevant to their needs. Each step in the systematic process of technology intelligence returns to
its previous stage.
Most studies on the technology intelligence system only describe the inputs, outputs and processes
of intelligent technology systems. Technology intelligence is a vital issue for organizations,
however because of existing numerous publications on how to manage the process of technology
intelligence and effective factors, this is no consensus on this concept both theoretically and
practically. Therefore, using credible and reliable standard that can both promote the consensus
and improve understanding of technology intelligence in practice deeply, is necessary.
The standard is a common and inclusive framework which provides the basis for deep understanding
and the creation of uniformity. However, it is possible also that the concept of standardization
may be generally understood negatively, because people think standard means using a same
method and a framework in different situations. In the present study, the goal is not to provide
the same framework for different situations. The purpose is to familiarize with how to standardize
the technology intelligence system in different organizations. The standard intelligent technology
system can help integration and coordination of intelligent technology activities more. The purpose
of the design of the standardized intelligent system is the stabilization, definition and normalization
of inputs (demands) based on the type of technological decisions of the organization, linking inputs
to outputs, definition of standard outputs and definition of standard and appropriate processes for
providing reports related to the outputs.
3. Methodology of Research
In this study, qualitative research approach and content analysis method have been used. content
analysis method is the process of subjective interpretation of text content through the systematic
categorization process, coding, identifying themes and patterns (Hsieh and Shanon, 2005).
The purpose of this study is to design a standard technology intelligence system. The study was
conducted at the National Iranian Gas Company. In order to identify the important technological
decisions of the National Iranian Gas Company and identify the data needs to meet these needs, some
interviewees have been done with some of the experts of Iran Gas Company. The most important
interview questions are given in the following table.
Table 1: Research Questions
The method of selecting samples is a purposeful sampling. This involves identifying and selecting
individuals or groups of individuals that are especially knowledgeable about or experienced with a
phenomenon of interest. Interviews continued as long as to get theoretical saturation (Krsul, Planck,
2011). The list of interviewees is presented in the table 2.
Table 2: List of Interviewees
Interviewee Code Organizations Date
A1 Research and Technology Management of Gas Company 2017/11/11
A2 Research and Technology Management of Gas Company 2017/11/28
A3 Research and Technology Management of Gas Company 2018/01/10
A4 Engineering and Development Company 2018/02/05
A5 Engineering and Development Company 2018/02/05
A6 Engineering and Development Company 2018/02/12
Interviews were coded and important points were made about the types of technological decisions,
the type of data needed for decision making and the stakeholders and decision makers of the National
Iranian Gas Company.
better and faster and learns more about their failure and success. It enables managers to make
decisions by systematical monitoring and greater awareness. The most important features
of strategic decisions are Unstructured, Creative and non-repetitive, uncertainty, ambiguity,
complexity and chaos environment, Based on hard data (statistics and figures) and soft data
(ideas, intuition and management judgment), a forward-looking and relatively long-term horizon,
Under resource constraints and competitive pressure, Related to the external environment,
Effective on the overall organization, Key role for long-term success and Based on hybrid thinking.
These kind of decisions have three steps in strategic decisions 1) Identifying opportunities and threats
2) Development of options and solutions 3) selecting proper options and solutions and finalization.
The fundamental strategic decisions include changing sales and service strategies, deciding to enter
new markets, changing products and services, changing technology and research and development
strategies and so on (Rezaeian and Lashkar, 2010). Other important decisions in the Iranian gas
companies, that the experts have pointed out, are decisions to develop a technology strategy that
mainly addresses two fundamental questions: 1) Does the organization need to change technology
and adopt a new technology? 2) What if the acquisition of a new technology is needed, what is the
most appropriate acquisition method and what decisions should be made in this regard?
For example, for investing in new technology the important information that will be needed are both
to know what the market is and how technology is developed (West, 2001). The following table
shows what resources are more relevant and needed for the making the decisions. Darker colors
show more and clear colors show less importance. The white color indicates the ineffectiveness
and irrelevance of the sources in accessing relevant information needs to make identified decisions.
On one hand, in order to obtain strategic decision-making at the enterprise level, such as the
acquisition of data in order to identify the weak signals, the continuous scanning approach should be
used to obtain information and scanning reports as an intelligent product of the analysis of this type
of data. Scanning is a continuous activity that examines the external environment and the extent to
which science and technology are developed in a variety of areas that may be needed in the future.
Scanning without focusing on specific domains, continuously collecting information that can cover
unspecified needs. Scanning reports require more secondary resources because of its broad and
comprehensive approach. It is not necessarily possible to use the patent analysis to analyze its data.
The most important methods of scanning analysis are Delphi method analysis. scanning reports can
be applied for technology foresight, strategic planning and strategic decisions.
On the other hand, in order to make decisions of technology acquisition, it is also necessary to
collect relevant data. In this section, the most important ways of obtaining data are monitoring
and scouting and intelligent products that can be helpful here are monitoring and scouting reports.
Monitoring routinely organizes the topics of science and technology and aims to follow trends
and developments. Technology scouting seeks to collect and review information about specific
technologies, consultants and experts that respond to user needs. Both monitoring and scouting
reports look at trends more detailed. At these two levels, primary resources are more important
sources than the level of scanning.
The following table provides a clear explanation of the type of decisions based on literature and
interviews with gas company experts and based on each decisions, related needs have been defined.
Then, it has been determined that what kind of intelligence reports are needed to obtain these
defined needs to make the specified decisions. It should be noted that the first and second columns
of Table 1-2 (technological decision-making positions and defined needs) can be completed more,
considering other needs that Gas company may define in the future.
Table 4: Standard Intelligent Technology System
Decision Information
Information Sources Intelligence Products
Types Needs
Scouting Monitoring
Primary Resources (Interviews, Observations , …)
Company’s websites
Scanning Reports
Reports Reports
Patent analysis
Publication analysis
Market analysis
Patent analysis
Publication analysis
Market analysis
Publication analysis
Market analysis
Delphi analysis
Benchmarking
Scenario analysis
Strategic dentifying
decision at weak signals
agent level
Identifying
opportunities
and threats
of new
technologies
Decision Information
Information Sources Intelligence Products
Types Needs
Strategic Identifying
decision at need to change
technology technology
level
Determining
the best way
of technology
acquisition
Technology Identification
purchase of consulting
decision companies
Identification
of main
competitors
Techno-
economic
analysis of
technological
choices
Forecasting
technological
trends
Market
analysis of
technological
choices
Technology Identification
development of main
decision competitors
Identification
of consulting
companies
Analysing the
technical and
economical
attractiveness
of
technological
options
Determining
the position
of identified
technological
options in the
life cycle
Decision Information
Information Sources Intelligence Products
Types Needs
Technological Identification
cooperation of main
decision competitors
Identification
of selected
technological
trends
Techno-
economic
analysis of
technological
options
Analysis of the
competition
position of
company
Identification
of suppliers
and
manufacturers
of identified
technological
options
4. Conclusion
Chang emphasizes that researchers and decision-makers need accurate definition of technology
intelligence to make appropriate decisions. Technology intelligence can create opportunities for the
company, therefore its implementation should be an organized effort. Norling (2000) recommends
the use of sophisticated tools for analyzing relevant information and providing intelligent products
and sending them to empowered and experienced people in the organization to make decisions.
Lichtenthaler (2003) provides intelligent methods and different structures of intelligence. He argued
that technology intelligence is a capacity that identifies technological advances over time. He also
insists that the most important technology intelligence function is to develop knowledge about
the opportunities and threats of technologies. In this regard, Savioz (2004) recalls the technology
intelligence as a systematic model for collecting, analyzing and distributing information to find
new opportunities. In 2006, Ker et al. Examined technology intelligence in three levels framework,
system and process. At the level of framework, it seeks to connect decision makers (clients) and
intermediaries to map the information needs and knowledge gaps of decision makers and also extract
relevant information from different sources. The system level explores how to link inputs and outputs
of technology intelligence and the process level involves activities technology intelligent across
the organization. Accordingly, the present study seeks to provide a systematic and standardized
framework for intelligent technology in the National Gas Company of Iran. In this study based on
interviews key decision makers, key information needs, relevant information sources and intelligent
product have been determined. Then according to systematic perspective these components were
linked to each other in a standard way to help the company respond the environmental changes and
make appropriate decisions quickly. The study tries to bridge the gap in researches and explains how
you advance the previously cited literature by designing a standard technology intelligence system.
5. Acknowledgements
The authors would like to express their acknowledgements to the following people and institutions,
whom with their kind collaboration, made this work possible:
To the National Gas company of Iran and subsidiaries, which supported authors to adjust appointments
to interview with the experts of Gas company and provided supervision for the implementation of a
technology intelligence system.
6. References
Ashton, W.B., (1991), A structured approach for monitoring science and technology developments. Journal of
Technology Management, 6(1/2), 91-111.
Ashton, W.B., (1995), Technical Intelligence in business: understanding technology threats and opportunities.
International Journal of Technology Management, 10 (1) 79-104.
Castellanos, O.F., (2010), Technology intelligence: Methods and capabilities for generation of knowledge and decision
making. Technology Management for Global Economic Growth (PICMET), 2010 Proceedings of PICMET’.
Phuket, Thailand.
Chang, H.G., (2008), Innovative technology management system with bibliometrics in the context of technology
intelligence, trends in intelligent systems and computer engineering .
Chesbrough, H.W., (2003), The Era of Open innovation. MIT sloan management review, 44 (3).
Cooper, A.S. (n.d.). Strategic responses to technological threats. Business Horizons, 61-69.
Davis, W. (1999), Simulation: Technologies in the new millennium. In Proceedings of the 31st conference on Winter
simulation: Simulation---a bridge to the future, 1, 141-147
Ethel, A. a., (1994), How senior managers acquire and use informaion in environmental scanning. Information processing
and management, 30 (5), 607-618.
Hsieh, H.-F. a., (2005), Three approaches to qualitative content analysis. Qualitative health research 15(9), 1277-1288.
Karshenas, A.A., (2016), The Development of Technology Intelligence in the National Innovation Ecosystem: The Case
of Fuel Cell Technology. International Business Management, 10.11 , 2317-2328.
Kostoff, R.N., (2003), Science and Technology Text Mining: Electrochemical Power. OFFICE OF NAVAL RESEARCH
ARLINGTON VA,.
Kostoff, R.N. (2005), Science and technology text mining: wireless LANS, OFFICE OF NAVAL RESEARCH
ARLINGTON VA.
Krsul, J. &. (2011), Combined research methods, translation by Kiamanesh, A., & Saraei, J. Tehran: Aijj Publishing ,
1st edition. {In Persian}.
Lang, H.-C. a. (1997), Technology intelligence identifying and evaluating new technologies. PICMET’97: Portland
International Conference on Management and Technology. IEEE. Portland, USA.
Lichtenthaler, E., (2003), Third generation management of technology intelligence processes. Journal of R@D
management, 33 (4), 361-375.
Lichtenthal, E., (2004), Technological change and the technology intelligence process: A case study. Journal of
Engineering and Technology Management, 21 (4), 331-348.
Lichtenthaler, E., (. (2005), The choice of technology intelligence methods in multinationals: Towards the contingency
approach. International gournal of Technology mnagement, 32 (3/4), 388-407.
Lichtenthaler, E., (2007), Managing technology intelligence processes in situations of radical technological change.
Technological Forecasting and Social Change, 74 (8), 1109-1136.
López Yáñez, J., (2002), Hacia una nueva teoría de los sistemas organizativos, Organización y gestión de centros
educativos, Madrid: Praxis .
Miller, J., (1965), Living systems: basic concepts, Behavioral Science 10, 193-237.
Mortara, L.K., (2009), A toolbox of elements to build technology intelligence systems. International Journal of
Technology Management, 47(4), 322-345.
N., K.R., (1993), Database tomography for technical intelligence. Comperirive Inrelligence Review, 4 (1).
Norling, P.M., (2000), Putting competitive technology intelligence to work. Research-Technology Management 43(5),
23-28.
Rezaeian, A.L., (2010), Competitive intelligence and decision making strategy. international Journal of Managmant
Perspective.
Savioz, P.H., (2001), Implementing a Technology Intelligence System: Key Issues. Portland International Conference
on Management of Engineering and Technology (PICMET). Portland (US).
Savioz, P. &. (2002), Strategic Forecast Tool For SMEs: How the Opportunity Landscape Interacts with Business
Strategy to Anticipate Technological Trends. Journal of Technovation, 22 (2), 91-100.
Savioz, P. &. (2004), Technology Intelligence System: Benefits and Roles of Top Management. Bringing technology
and innovation into the boardroom, Strategy, Innovation and Competences for business value. New York,
Palgrave Macmillan.
Savioz, P., (2006), Technology Intelligence systems: Practices and models for large, medium-sized and start-up
companies. Int. J. Technology Intelligence and Planning, 2 (4), 360-379.
West, C., (2001), Competitive Intelligence. 1st published. PALGRAVE.
Abdeslam Hassani
Université de Sherbrooke, École de gestion, Canada
E-mail: a.hassani@usherbrooke.ca
Elaine Mosconi
Université de Sherbrooke, École de gestion, Canada
E-mail: elaine.mosconi@usherbrooke.ca
Abstract
Introduction and Purpose: Despite the importance of the Small and Medium-sized Enterprises (SMEs) in
Canada’s economic growth, competitiveness in a dynamic and complex environment is becoming more and more
difficult to ensure for SMEs. In order to survive and achieve business performance, there is a need for SMEs to
innovate. Innovation is based largely on investing in research and development (R&D). However, most SMEs do
not have sufficient resources to invest in R&D. Therefore, to innovate, SMEs can use information from a variety of
external sources using competitive intelligence (CI). CI enables companies to improve innovation process. However,
it requires a Prospector owner-manager. This paper presents how Prospector owner-manager has a positive influence
on the CI in his company. In addition, the information gathered from immediate environment made up of customers,
competitors, suppliers and technologies has a positive influence on an innovation performance.
Methodology: The paper is based on a case study of a SME located in Quebec’s Eastern Townships in Canada. A
triangulation perspective based on semi-structured interviews with managers, document analysis and non-participant
observation, was used for data collection. Managers interviews and data collected were analyzed to understand how
competitive intelligence contribute to the innovation performance of their business.
Findings: The innovation performance of SMEs seems to be associated with the activity of competitive intelligence.
The results indicate that the innovation performance of SMEs is associated with intelligent information from
customers, competitors, suppliers and technologies. In addition, prospector owner-manager positively influences
competitive intelligence
Contributions: The study suggests the need to move towards the external environment of the company to
collect and analyze information to feed the innovation process. The results also imply the need, for SMEs,
to focus on its immediate environment of customers, competitors, suppliers and technologies to improve its
innovation performance.
Keywords: Innovation Performance, Competitive Intelligence, Prospector Owner-manager, SME, Canada
1. Introduction
Small and medium-sized enterprises (SMEs) are considered the primary source in creating job
and economic wealth (Julien 1995; Olawale and Garwe 2010) employing more than 95 % of
the world’s working population (Pellissier and Nenzhelele 2013). In Canada, SMEs account for
99.7% of total firms in terms of working population and contribute about 54% of Canada’s GDP
(Statistics Canada, 2016).
Despite the importance of the SMEs in economic growth, significant obstacles impede their
sustainability, leading in most cases to failure. One way to overcome this challenge and survive
innovation is necessary (Becheikh et al., 2006; Rujirawanich et al., 2011). To innovate, companies
must invest more in research and development (R & D) (Baldwin and Hanel, 2003), which is a
determinant of innovation (Raymond and St-Pierre, 2007). However, most of SMEs do not have
sufficient resources to invest in R & D (Moilanen et al., 2014). Moreover, they are not qualified to
benefit from government assistance programs for R & D (Institut de la Statistique Quebec, 2002).
For this reason, they are forced, more than ever, to exploit external information
(Amara and Landry, 2005; Davila et al., 2009) by adopting environment analysis activities such as
competitive intelligence (CI) (Guimaraes et al., 2016).
CI allows companies to gather information from customers, suppliers, competitors and technologies
and thus build a strong foundation for the innovation process (Pacitto and Tordjman 1999; Tidd,
et al., 2005). However, the literature shows that the effectiveness of CI in SME context, depends,
among other things, of the profile of the owner-manager of the company. The SME prospector
owner-manager is a determining factor in acquiring and interpreting external information
(Baldwin and Gellatly, 2003).
Although CI is useful for businesses, very few studies have devoted concentrated on SMEs
(Savioz et al. Tschirky, 2004), particularly in the Canadian context (Bergeron, 2000). More
specifically, regarding the relationship between CI and SME innovation performance, a systematic
literature review (Hassani and Mosconi, 2017) could identify only two research studies: Laforet
(2008) and Tanev (2004). Considering how strategic CI can be for SMEs, this exploratory study
investigates the contribution of CI to the innovation performance. More specifically, the research
question is: What would be the contributions of prospector owner-manager to the CI in gathering
intelligent information from customers, competitors, suppliers and technologies to the SMEs
innovation performance?
In the following, we will first present the literature and introduce the proposed conceptual framework.
In section 3 we explain the research methodology. In sections 4 and 5 we present results and discuss
findings related to this case study. Finally, conclusion, limits and future research are presented.
2. Literature Review
Competitive intelligence, also known as business intelligence, is both a process and a product
(Vedder et al., 1999). In this paper, CI can be defined as a product which refers to intelligent
information about competitors’ activities from public and private sources and its scope is the present
and future behavior of competitors, suppliers, customers, technologies, acquisitions, markets,
products and services and the general business environment (Vedder et al., 1999).
The main objective of CI is to provide an alert system for external turbulence that may have
an impact on the company’s strategy and performance (Ngamkroeckjoti and Speece, 2008).
The three main sources of these environmental turbulence are market, technologies and competitive
intensity (Jaworski and Kohli 1993; Ngamkroeckjoti and Speece 2008). In the context of SMEs,
empirical studies highlight that SMEs prefer to monitor sources of their immediate environment
(Johnson and Kuehn, 1987; Ramangalahy, 2001). This environment is made up of customers,
competitors, suppliers (Dill, 1958; Smith et al., 2010) and technologies (Duncan, 1972).
CI is essential for business because it not only provides a solid foundation for the innovation
process (Pacitto and Tordjman, 1999; Tidd et al., 2005), but also its absence considered as a barrier
(St-Pierre and Trépanier, 2013) or even a determining factor of the failure of innovation
(Wycoff, 2003; Baldwin et al., 2000).
CI as an activity for the collection, interpretation and dissemination of external information requires a
prospector owner-manager support. This prospector owner-manager is characterized by proactivity,
innovation and risk-taking (Chandler and Jansen, 1992). Thomas et al. (1993) argue that proactive
managers are more knowledgeable about environmental dynamics and able to create a fit between
external environmental analysis and internal factors’ organization.
2.3.2. Customers
According to Kohli and Jaworski (1990), the companies need to have an intelligence information
from customers. This intelligence increases the level of innovation (Bayarçelik et al., 2014) and
positively affects the development activity of new products (Bayarçelik et al., 2014; Voss, 2012). More
specifically, intelligence on customers has a positive effect on the radical innovation performance
(Nguyen et al., 2015; Frambach et al., 2016) incremental innovation (Laforet, 2008, Nguyen et al.,
2015) in particular, in the early stages of its life cycle (Laforet, 2008). From these arguments, we can
propose the next proposition:
P2: Intelligent information from customers seems to have a positive link with the innovation
performance of the SME.
2.3.3. Competitors
Prior research advises companies to monitor competitors in order to develop greater ability to
accelerate product innovation activities (Lee and Wong, 2012; Laforet, 2008) and to innovate in areas
where competitors are not strong (Story et al., 2015). Competitive intelligence from competitors can
affect the different types of innovation in companies. It contributes to radical service innovation
(Cheng and Krumwiede, 2012). In the same vein, Frambach et al. (2016) note that intelligent
information from competitors stimulates the exploitation of skills and leads to the development of
radical innovation. Thus, we can propose:
P3: Intelligent information from competitors seems to have a positive link with innovation
performance of the SME.
2.3.4. Supplier
Suppliers often establish strategic partnerships with customers and competitors to implement
technologies, process or new product. To gathering information from suppliers, the company can
therefore conduct primary research (Slater et al., 2012). According to Carbonell and Rodríguez
Escudero (2010), intelligent information from suppliers allows the product development team to
understand the market dynamism and act faster, which can contribute to new products performance.
Zhang and Chen (2014) argue that intelligent information from suppliers has a positive influence on
innovation performance.
Drawing upon these arguments, we can propose the next proposition
P4: Intelligence information from suppliers seems to have a positive link with innovation
performance of the SME.
2.3.5. Technologies
Several research results highlight the importance of technologies as a rich information source which
contribute to the emergence of innovative ideas. Information from technologies allows organizations
to be more competitive (Duncan 1972; Souitaris 2001; Vedder et al., 1999).
The literature highlights multiple tools and technologies platforms that can help companies
gathering information about their external environment. The internet, especially social media, can
be considered as sources of information most often mentioned in the literature. Teo and Chow
(2001) argue that the internet helps companies to gather quality market information and make
more informed decisions. In the same vein, Afuah (2003) emphasizes that the internet improves the
integration of innovation activities through the exchange of ideas with external actors, especially
with customers. Social media, on the other hand, is seen as both a source and a tool for gathering
information about competitors’ offer and the customers’ needs (Itani et al., 2017). Laforet (2008)
notes that the company, especially the SME which is more interested in technologies, can achieve
a high degree of novelty of its product and consequently to perform in innovation. From these
arguments, we can propose the next proposition:
P5: Intelligent information from technologies seems to have a positive link with innovation
performance of the SME.
Figure 1: The Prospector Owner-manager Influence to IC and the Contribution to Innovation Performance
3. Methodology
The purpose of this study is to understand how CI affects the innovation performance of SME.
This exploratory aim of work justifies the use of a qualitative methodology. A case study research
approach was used in this paper, as it provides better internal validity through close observation
of the phenomenon of interest in the natural context (Eisenhardt, 1989; Yin, 2003). As the topic
of effects on CI on the innovation performance of SMEs is relatively unexplored, the case study
approach has been found appropriate. In this paper, our case study is a SME located in Quebec’s
Eastern Townships in Canada. It develops products and services for companies operating in the
manufacturing sector. In the next sections, this SME will be named “Company A”.
4. Results
The purpose of this study is to understand how CI affects the innovation performance of the SME.
This section presents the activities of innovation and CI within Company A. Then, it highlights
the main data collected on the CEO prospector and components of the immediate environment of
Company A.
5. Discussion
To present our data results in Company A, we adopted a narrative perspective. This allows us
to discuss in more detail the implications of our results for CI and its contribution to innovation
performance of Company A.
In general, the results show that despite the lack of resources, SMEs can practice, at least in part,
competitive intelligence (Fleisher and Blenkhorn, 2001). However, this activity is incomplete,
unsystematic and informal, which makes it inefficient (Bergeron 2000; Dishman and Calof, 2008).
P1: The prospector CEO has a positive impact on competitive intelligence activity in SMEs.
The CEO (MD) conducts thought and imagination exercises in the presence of several managers
and middle managers to bring out innovative ideas. According to McAdam and McClelland (2002),
the expertise and imagination of CEOs are components of creative problem solving. The strategic
planning activities held periodically by the CEO (MD), aim to anticipate changes in the external
environment of Company A. In this sense, the literature reveals that the CEO with a proactive
personality is able to understand the market trends and therefore anticipate planned changes
(Becherer and Maurer, 1999). Drawing upon these arguments, we presume that there is a positive
relationship between the prospector CEO and CI.
P2: Intelligent information from customers seems to have positive links with the innovation
performance of the SME.
According to several managers in Company A, employees are directly connected to customers’ factories,
allowing them to understand the needs and preferences of these customers (Kohli and Jaworski, 1990).
Considering the needs and preferences of customers leads to new ideas, products and services
(Narver et al., 2004). The transformation and exploitation of customer insights into innovation relies
heavily on the skills of the individuals at Company A. In fact, coordination and communication with
customers contributes to the creation of new knowledge and to increase absorptive capacity, which
in turn leads to innovation (Gatignon and Xuereb, 1997). From these arguments, we presume that
there is a positive link between intelligent information from customers and innovation performance of
Company A.
P3: Intelligent information from competitors seems to have positive links with the innovation
performance of SMEs.
The results show that Company A is more interested in understanding customer needs and
preferences by practicing less of CI from competitors. This orientation can be explained by Groom
and David (2001) for whom “ Small organizations with high revenues are more satisfied with current
intelligence than small organizations with low revenues”. In addition, literature in the field suggests
that excessive customer orientation hampers the monitoring of changes in the external environment
(Koberg et al., 1996).
Company A would have taken full advantage of its innovation activities if its employees were
collecting strategic information about competitors. As highlighted by the CEO (MD), the low
intensity of CI from competitors within his company is a barrier for innovation and growth of
the company. In the same vein, the lack of the CI from competitors led to the losses of several
opportunities of innovation and growth, adds the CEO (MD).
According to Theodosiou et al. (2012), CI from Competitors aims to learn about their objectives,
strategies, activities, offers, resources, capabilities and competitive advantages. However, within
Company A, managers find it difficult to collect strategic information about competitor. Thus,
we presume that there is a positive link between intelligent information from competitors and the
innovation performance of Company A.
P4: Intelligent information from suppliers seems to have positive links with the innovation
performance of the SME.
As the OECD report (2005) points out, companies in all countries prefer to collaborate with
customers and suppliers rather than with competitors and private R & D centers to protect their
internal development model. Indeed, the results of our study show that the management of Company
A is more open to collaborate with suppliers, which allows them to collect information on customers
and on competitors.
Collaboration with suppliers allows employees of Company A to collect, interpret and then suggest
innovative ideas. This collaboration has enabled Company A to identify opportunities for developing
new technological solutions and to become a leader in its field. This is also the position of Song and
Thieme (2009) for whom “the participation of suppliers in competitive intelligence activities has an
impact on the success of innovations”.
The literature shows that close relationships with suppliers serve to stimulate the exploitation
of individual absorptive capacities and thus enhance organizational absorptive capacity, which
contributes to the success of innovation (Cohen and Levinthal, 1990). From these arguments, we
presume that there is a positive link between the intelligent information from suppliers and the
innovation performance of Company A.
P5: Intelligent information from technologies seems to have positive links with the innovation
performance of the SME.
As mentionned by the CEO (MD), his company’s focus on technologies has led to the identification
of needs, which have been transformed into innovative projects. According to MD, these projects
contributed to a 15% increase in business volume. In the same vein, the literature reveals that a
CI from technologies allows firm to create new technical solutions and develop new products
(Gatignon and Xuereb, 1997).
Using technologies, including supplier websites, social media, blogs and forums and Google Alerts
within Company A enabled its managers to monitoring changes related to new technologies trends.
Technological vigilance has led Company A to take the shift of the 4.0 industry and then to become
leader in Quebec province.
Many studies have pointed out that technologies are considered as information source which
contribute to business competitiveness (Souitaris, 2001; Vedder et al., 1999). To exploit these
information sources, the company must have individuals with prior knowledge in the field. For
Company A, more than 90 engineers have technical training and diversified experiences in several
technological fields. These skills enable to transform technological information into innovative
projects. Thus, we presume that there is a positive link between intelligent information from
technologies and innovation performance of Company A.
As a limit of this study, the results obtained are not generalizable because of the research approach
chosen as well as the heterogeneity existing between SMEs (Julien, 2005; Tidd et al., 2005).
Given that there is no unique way to innovate (Tidd et al., 2005) and that CI practices are
heterogeneous (Julien et al., 1995), our future research plans to test the conceptual model using
a quantitative method through a survey that will be conducted among a large sample of SMEs
across Canada.
7. Acknowledgements
This work has been supported by the MITACS Accelerate Program in Canada. The authors thank
our industrial partner for their support of this research. Abdeslam Hassani wants to acknowledge
that his portion of this article was prepared within the framework of his doctoral program and the
framework of traineeship in Company A .
References
Afuah, A. (2003). Redefining firm boundaries in the face of the Internet: Are firms really shrinking? Academy of
Management Review, 28(1), 34–53.
Alegre, J., Lapiedra, R. & Chiva, R. (2006). A measurement scale for product innovation performance. European
Journal of Innovation Management, 9(4), 333-346.
Amara, N. & Landry, R. (2005). Sources of information as determinants of novelty of innovation in manufacturing
firms: evidence from the 1999 statistics Canada innovation survey. Technovation, 25(3), 245-259.
Baldwin, K. (1994) Innovation: The key to success in small firms.
Baldwin, J.R., Bian, L., Dupuy, R. & Gellatly, G. (2000). Taux d’échec des nouvelles entreprises canadiennes: nouvelles
perspectives sur les entrées et les sorties.
Baldwin, J.R. et Gellatly, G. (2003). Innovation strategies and performance in small firms. Edward Elgar Publishing.
Baldwin, J.R. et Hanel, P. (2003). Innovation and Knowledge Creation in an Open Economy: Canadian Industry and
International Implications, Cambridge, U.K. Cambridge University Press.
Bayarçelik, E.B., Taşel, F. & Apak, S. (2014). A research on determining innovation factors for SMEs. Procedia-Social
and Behavioral Sciences, 150, 202-211.
Becheikh, N., Landry, R. & Amara, N. (2006). Les facteurs stratégiques affectant l’innovation technologique dans les
PME manufacturières. Canadian Journal of Administrative Sciences/Revue Canadienne des Sciences de
l’Administration, 23(4), 275-300.
Becherer, R.C. et Maurer, J.G. (1999). The proactive personality disposition and entrepreneurial behavior among small
company presidents. Journal of small business management, 37(1), 28.
Belley, A. & Ramangalahy, C. (1994). Relation entre le profil de comportement des propriétaires-dirigeants et le stade
d’évolution de leur entreprise. Revue internationale PME: Économie et gestion de la petite et moyenne
entreprise, 7(1), 9-34.
Bergeron, P. (2000). Regional business intelligence: the view from Canada. Journal of Information Science, 26(3),
153-160.
Brody, R., (2008). Issues in defining competitive intelligence: An exploration. Journal of Competitive Intelligence and
Management 4(3), 3–16.
Carbonell, P. & Rodríguez Escudero, A. I. (2010). The effect of market orientation on innovation speed and new product
performance. Journal of Business & Industrial Marketing, 25(7), 501-513.
Chandler, G.N. & Jansen, E. (1992). The founder’s self-assessed competence and venture performance. Journal of
Business venturing, 7(3), 223-236.
Cheng, C.C. & Krumwiede, D. (2012). The role of service innovation in the market orientation—new service performance
linkage. Technovation, 32(7), 487-497.
Davila, A., Foster, G. & Li, M. (2009). Reasons for management control systems adoption: Insights from product
development systems choice by early-stage entrepreneurial companies. Accounting, Organizations and
Society, 34(3), 322-347.
Dill, W.R. (1958). Environment as an influence on managerial autonomy. Administrative science quarterly, 409-443.
Dishman, P.L. & Calof, J.L. (2008). Competitive intelligence: a multiphasic precedent to marketing strategy. European
Journal of Marketing, 42(7/8), 766-785.
d’Oslo, M. (2005). La mesure des activités scientifiques et technologiques-Principes directeurs proposés pour le recueil
et l’interprétation des données sur l’innovation technologique. OCDE, Ed. a.
Duncan, R.B. (1972). Characteristics of organizational environments and perceived environmental uncertainty.
Administrative science quarterly, 313-327.
Eisenhardt, K.M. (1989). Building theories from case study research. Academy of management review, 14(4), 532-550.
Elbashir, M.Z., Collier, P.A. et Sutton, S.G. (2011). The role of organizational absorptive capacity in strategic use
of business intelligence to support integrated management control systems. The Accounting Review, 86(1),
155-184.
Fleisher, C.S. & Blenkhorn, D.L. (Eds.). (2001). Managing frontiers in competitive intelligence. Greenwood
Publishing Group.
Frambach, R. T., Fiss, P. C., & Ingenbleek, P.T. (2016). How important is customer orientation for firm performance? A
fuzzy set analysis of orientations, strategies and environments. Journal of Business Research, 69(4), 1428-
1436.
Gatignon, H. & Xuereb, J.M. (1997). Strategic orientation of the firm and new product performance. Journal of
marketing research, 77-90.
Geraudel, M. (2008). Réseau personnel du dirigeant de PME et accès aux ressources: le rôle modérateur de la
personnalité (Doctoral dissertation, éditeur non identifié).
Groom, J.R. & David, F.R. (2001). Competitive intelligence activity among small firms. SAM Advanced Management
Journal, 66(1), 12.
Guimaraes, T., Thielman, B., Guimaraes, V.C. & Cornick, M. (2016). Absorptive capacity as moderator for company
innovation success. International Journal of the Academic Business World, 10(2), 1-18.
Hassani, A. and Mosconi, E., (2017). La relation entre l’intelligence compétitive et la performance de l’innovation:
une revue systématique de littérature. In Proc. Administrative Sciences Association of Canada (ASAC)
Conference, 29 mai à 1er Juin 2017. Montréal: ASAC.
Itani, O. S., Agnihotri, R., & Dingus, R. (2017). Social media use in B2b sales and its impact on competitive intelligence
collection and adaptive selling: Examining the role of learning orientation as an enabler. Industrial Marketing
Management, 66, 64-79.
Jaworski, B.J. & Kohli, A.K. (1993). Market orientation: antecedents and consequences. The Journal of marketing,
53-70.
Johnson, J.L. et R. Kuehn (1987). The small business owner-manager search for external information, Journal of Small
Business Management, vol. 25. n.3, pp. 52-60.
Julien, P.A. (2005). Les PME: Bilan et perspectives, 3ème édition (Presses Inter Universitaires).
Julien, P.A. (1995). Globalisation de l’économie et PME. Journal of Small Business & Entrepreneurship, 12(3), 58-72.
Koberg, C.S., Uhlenbruck, N. & Sarason, Y. (1996). Facilitators of organizational innovation: The role of life-cycle
stage. Journal of business venturing, 11(2), 133-149.
Kohli, A.K. & Jaworski, B.J. (1990). Market orientation: the construct, research propositions and managerial
implications. The Journal of Marketing, 1-18.
Laforet, S. (2008). Size, strategic and market orientation affects on innovation. Journal of business Research, 61(7),
753-764.
Lee, K.B. & Wong, V. (2012). Organizational coordination, development proficiency and on-time completion of
development and international rollout: A contingency analysis of external environments. Journal of Business
Research, 65(3), 389-401.
McAdam, R. & McClelland, J. (2002). Sources of new product ideas and creativity practices in the UK textile industry.
Technovation, 22(2), 113-121.
Miles, R.E. et Snow, C.C. (1978). Organizational Strategy, Structure and Process. New York : McGraw-Hill.
Miles M.B. et Huberman A.M. (2005), Analyse des données qualitatives, De Boeck Université, 2e édition, 2e tirage,
Bruxelles.
Moilanen, M., Østbye, S. & Woll, K. (2014). Non-R&D SMEs: external knowledge, absorptive capacity and product
innovation. Small Business Economics, 43(2), 447-462.
Najafi-Tavani, S., Sharifi, H. & Najafi-Tavani, Z. (2016). Market orientation, marketing capability and new product
performance: The moderating role of absorptive capacity. Journal of Business Research, 69(11), 5059-5064.
Ngamkroeckjoti, C. & Speece, M. (2008). Technology turbulence and environmental scanning in Thai food new product
development. Asia Pacific Journal of Marketing and Logistics, 20(4), 413-432.
Nguyen, B., Yu, X., Melewar, T.C. & Chen, J. (2015). Brand innovation and social media: Knowledge acquisition from
social media, market orientation and the moderating role of social media strategic capability. Industrial
Marketing Management, 51, 11-25.
Olawale, F. et Garwe, D. (2010). Obstacles to the growth of new SMEs in South Africa: A principal component analysis
approach. African Journal of Business Management, 4(5):729–738.
Pacitto, J.C. & Tordjman, F. (1999). L’innovation technologique dans la très petite entreprise industrielle française:
ce que disent les statistiques. Revue internationale PME: Économie et gestion de la petite et moyenne
entreprise, 12(3), 59-90.
Pellissier, R. & Nenzhelele, T.E. (2013). The impact of work experience of small and medium-sized enterprises owners
or managers on their competitive intelligence awareness and practices: original research. South African
journal of information management, 15(1), 1-6.
Ramangalahy, C.F.E. (2001). Capacité d’absorption de l’information, compétitivité et performance des PME
exportatrices: une étude empirique. École des hautes études commerciales.
Ramangalahy, C., Julien, P.A., Raymond, L. & Jacob, R. (1997). La veille technologique: une étude empirique des
pratiques des PME manufacturières. Revue Systèmes d’information et management, 2(2).
Raymond, L. & St-Pierre, J. (2007). La R et D en tant que déterminant de l’innovation dans les PME: Essai de clarification
empirique. Retour aux communications, 5e Congrès International de l’Académie de l’Entreprenariat.
Rujirawanich, P., Addison, R. & Smallman, C. (2011). The effects of cultural factors on innovation in a Thai SME.
Management Research Review, 34(12), 1264-1279.
Savioz, P., Luggen, M. & Tschirky, H. (2004). Technology intelligence. Structuring it into the new-technology-based
firm (NTBF)., Tech Monitor, Heft, Jul-Aug, 41-46.
Serrano-Bedia, A.M., López-Fernández, M.C. & Garcia-Piqueres, G. (2016). Analysis of the relationship between
sources of knowledge and innovation performance in family firms. Innovation, 18(4), 489-512.
Slater, Stanley F., Eric M. Olson et Hans Eibe Sørensen. (2012). Creating and Exploiting Market Knowledge Assets.
Journal of Business Strategy 33, no 4: 1827.
Smith, J.R., Wright, S. & Pickton, D. (2010). Competitive intelligence programmes for SMEs in France: Evidence of
changing attitudes. Journal of Strategic Marketing, 18(7), 523-536.
Song, M. et Thieme, J. (2009). « The role of suppliers in market intelligence gathering for radical and incremental
innovation ». Journal of Product Innovation Management 26, no 1 (2009): 43–57.
Song, J., Wei, Y.S. et Wang, R. (2015). Market orientation and innovation performance: The moderating roles of firm
ownership structures. International Journal of Research in Marketing, 32(3), 319-331.
Souitaris, V. (2001). External communication determinants of innovation in the context of a newly industrialised
country: a comparison of objective and perceptual results from Greece. Technovation, 21(1), 25-34.
Story, V.M., Boso, N. & Cadogan, J.W. (2015). The form of relationship between firm‐level product innovativeness and
new product performance in developed and emerging markets. Journal of Product Innovation Management,
32(1), 45-64.
St-Pierre, J. & Mathieu, C. (2003). Financement par capital de risque: Évolution des connaissances des dix dernières
années et avenues de recherche. Programme de recherche sur le financement des PME.
St-Pierre, S.T. & Trépanier, M. (2013). Analyse des pratiques d’innovation dans les PME: facteurs endogènes, facteurs
exogènes et perspective systémique.
Tanev, S. (2004). Competitive intelligence information and innovation performance of IRAP funded companies
(Doctoral dissertation, Carleton University Ottawa, Canada).
Teo, T.S.H. et Chow, W.Y. (2001). Assessing the impact of using the Internet for competitive intelligence. Information
and Management, 39 (1), 67–83.
Theodosiou, M., Kehagias, J. et Katsikea, E. (2012). Strategic orientations, marketing capabilities and firm performance:
An empirical investigation in the context of frontline managers in service organizations. Industrial Marketing
Management, 41(7), 1058-1070.
Thomas, J.B., Clark, S.M. & Gioia, D.A. (1993). Strategic sensemaking and organizational performance: Linkages
among scanning, interpretation, action and outcomes. Academy of Management journal, 36(2), 239-270.
Tidd, J., Bessant, J. & Pavitt, K. (2005). Managing innovation integrating technological, market and organizational
change. John Wiley and Sons Ltd.
Yin, R.K. (2017). Case study research and applications: Design and methods. Sage publications.
Zhang, J. & Chen, L. (2014). The review of SMEs open innovation performance. American Journal of Industrial and
Business Management, 4(12), 716.
Vedder, R.G., Vanecek, M.T., Guynes, C.S. & Cappel, J.J. (1999). CEO and CIO perspectives on competitive
intelligence. Communications of the ACM, 42(8), 108-116
Voss, M. (2012). Impact of customer integration on project portfolio management and its success: Developing a
conceptual framework. International Journal of Project Management, 30(5), 567-581.
Wycoff, J. (2003). The « Big 10 » Innovation Killers: How to keep your innovation system alive and well. The Journal
for Quality and Participation, 26(2), 17-22.
Sangle Shirish
National Institute of Industrial Engineering, Mumbai
E-mail: shirishsangle@nitie.ac.in
Abstract
Introduction to the concept of Base Of Pyramid or Bottom Of Pyramid (BOP) by C.K. Prahalad in 1998 led to
a paradigm shift in how Multi National Enterprises (MNEs) work towards elevating poverty. The notion of
philanthropic contribution for poverty elevation of BOP was replaced with the idea that BOP represents a unique
market with challenges that are distinctly different from other segments of the economic pyramid. The BOP market
consists of multiple cultures, ethnicity, literacy, capabilities and needs and thus can be segmented multiple ways.
While this segmentation provides an opportunity to explore new markets with a purchase power parity of about $ 5
trillion, BOP has its own set of constraints as well. These constraints provide MNEs with extraordinary situations
which test the innovative capability of firms to meet the needs of BOP while profiting the firm itself. BOP provides
an untapped market potential and are hotbeds of commercial and technological experimentation. The purpose of this
paper is to answer the question of “what happened to BOP driven innovations since the inception of the concept of
BOP two decades ago?” To answer this question, the authors have conducted a retrospective study of articles on
BOP innovations over a period of twenty years from 1998-2018.The retrospective review of articles was done in
two stages. First, two databases, Web of Science and Google Scholar were referred to create a collection of articles
on BOP innovation from the period of 1998-2018. Only journal articles and conference proceedings were selected
for the review. Once the bibliographic records of BOP innovation papers were done, in the second stage, Analysis
of the selected articles was done. Initial analysis was done by Web of Science and then further analysis of the
articles was done by Vantage Point software. The review indicates that BOP innovations have evolved dramatically
over time. The number and type of BOP innovations have seen a rapid development in the last few years.
The article lists some of these innovations through cases and examples. Despite these developments, the review of
academic literature indicates a complex picture of the needs of BOP and how MNEs should work towards meeting
these demands. The study focuses on three aspects of BOP innovation evolution. First theme is the theoretical
evolution of the concept of BOP innovation. Second theme is the evolution in research methods for studying BOP
innovations. Finally, the third theme is evolution in the research type for BOP innovations. This article presents a
longitudinal study by analysing literature on BOP innovation from a period of 1998 to 2018. This study shows the
evolution in BOP literature since the introduction of the concept. This article contributes by presenting the trends
in BOP innovations. Based on the current trends, this article suggests projects future possibilities with regards to
BOP innovations.
Keywords: Base of Pyramid, Innovation, Poverty, Development, Market Driven Innovation, MNEs
1. Introduction
The idea that a capitalistic economy can solve the problems posed by poverty led to adoption of
profit maximization business models by Multi National Enterprises MNEs. The thought that market
forces and private ownerships of production leading to a prosperous society failed to make an impact
on the poverty situations all over the globe. The increasing population, decreasing quality of life
and environment pose a threat not only to governments but demands solutions from all aspects of
society. So, instead of visualizing the Bottom of Pyramid/ Base of Pyramid (BOP) as a liability,
the change in how MNEs can simultaneously involve and elevate the quality of life for BOP was
introduced through the works of C.K. Prahalad in 1998. While the business management initially
saw scant potential of engaging with the poor, there has been a paradigm shift in seeing BOP as an
opportunity rather than a threat.
The BOP market consists of multiple cultures, ethnicity, literacy, capabilities and needs and
thus can be segmented multiple ways. This segmentation provides an opportunity to explore
new markets with a purchase power parity of about $ 5 trillion. Since the attributes of BOP is
distinctly different from that of other sections of the society, the requirement are also quite different.
For example, in a developed country, say like UK or US, the mode of personal transport is a car.
While, for a country like India or Brazil, a car is a luxury and a symbol of being economically sound.
The mode of personal transport for such countries is a two wheeler. But a shift was observed when
Tata introduced a low-cost car, Nano to such a market. The identification of a market opportunity
and innovating for the said market has led to creation of a niche for such products, for which the
market didn’t exist before. The spending capability of BOP urges MNEs to innovate with and for
BOP markets with a vision to incorporate their needs and demands.
BOP has its own set of constraints as well. The reluctance to invest in BOP markets is easy to
understand. MNEs doubt the spending capability and barriers to commerce such as corruption,
illiteracy, inadequate infrastructure, currency fluctuations etc. (Prahalad and Hammond, 2002).
Along with the above challenges, there is also the challenge to uncover new sources of innovation
(Prahalad and Hammond, 2002) and diffusion of innovation (Rogers and Shoemakers, 1971).
These constraints provide MNEs with extraordinary situations which test the innovative capability
of firms to meet the needs of BOP while profiting the firm itself. BOP provides an untapped market
potential and are hotbeds of commercial and technological experimentation.
Although the concept of BOP arose almost 20 years ago, the question posed here is, how much of it
has actually been realised? The concept arose as an answer to how business can contribute towards
elevation of poverty (Kolk et al., 2014). Since then there has been a lot of debate over the concept
and its adoption by MNEs. Of the BOP research, the BOP driven innovation forms a very small,
but significant segment. BOP driven innovation brings into limelight the institutionalization of BOP
concept and how it has been adopted by MNEs.
The purpose of this paper is to answer the question of “what happened to BOP driven innovations
since the inception of the concept of BOP two decades ago?” To answer this question, the authors
have conducted a retrospective study of articles on BOP innovations over a period of twenty years
from 1998-2018.
Following the introduction, the paper is divided into four sections. First, the authors describe the
methodology used to identify relevant BOP articles. The following section describes the characteristics
of BOP driven innovation that emerged from the review including number of publications over the
years, countries from where publications are done, broad themes under which research has been
done followed by the thematic evolution of BOP driven innovation. The subsequent section provides
the discussion of the review followed by conclusions.
2. Methodology
For the systematic review, the first step was identification of articles which was done through
inclusion/ exclusion criteria. This involves selecting a particular set through identification of
boundaries for the review.
The first set of potential articles was selected by performing a keyword search in Web of Science,
Ebscohost and Google Scholar. These databases are major online databases of published articles in
business related disciplines. The initial keyword search was performed with two variants of the names
given to BOP, “Bottom of Pyramid” (e.g. C.K. Prahalad, 1998; Prahalad and Hart, 2002; Karnani, 2007)
and “Base of Pyramid” (e.g. Hart and Christensen, 2002; Simanis et al., 2008). Along with keywords,
the publication year range was given from 1998-2018. This database search led to identification of a
total of 141 papers, book chapters and conference proceedings.
For the next stage of the procedure, the identified papers were further scrutinized through a keyword
search of a combination of words such as, “BOP + innovation”, BOP driven innovation”, “Innovation
for BOP”, “Bottom of Pyramid + Innovation”, “Base of Pyramid + innovation”, “innovating for
poor” and “poverty + innovation”. This keyword combination led to exclusion of articles which were
not relevant for the systematic review. The number of articles reduced to 87.
Further inclusion and exclusion criteria of selecting relevant articles included selecting only research
articles and excluding book chapters and conference proceedings. This further reduced the number of
articles to 62. Following this, only those articles were selected which belonged to highly cited journals.
The selected 62 journals were reviewed for bibliographic records such as title, author, journal, year
of publication, author’s keyword, country of publication, research type and abstract.
In the final stage of selection procedure, the authors studied all 62 papers identified after the
completion of keyword search and further discarded an additional of 25 papers because the actual
content of the articles were not directly related to BOP driven innovation. This reading led to a final
set of 37 papers which were selected for review.
3. Results
The maximum number of articles is related to business and business models focused on innovating
for BOP followed by management. The relevance of BOP innovation is quite high in the business
context; hence the amount of research is also high in these two categories. Most articles are related
to development of concepts to venture into BOP markets with innovations exclusively targeting
consumers of BOP. Apart from business and management, the canvas of BOP driven innovation is
shared by industrial engineering, business ethics, computer science information etc. the common
denominator in all these categories is that all of them reflect the application and potential of
BOP innovations.
From the review, it is clear that USA has the highest number of publication followed by England,
India, Denmark, Germany etc. while it is expected that developed countries have the necessary
capabilities including financial capability to take business risks by venturing into BOP innovations,
it is definitely promising to see developing countries such as India and Brazil to have a share in
BOP innovation research. Since BOP is relevant in developing countries, it is imperative that such
countries take a keen interest in developing products and processes aimed for the citizens of their
own. Also, the problems of cultural difference and language barriers can be avoided when a country
innovates for its own people. This provides the firms of that country with a competitive advantage
over firms belonging to other countries who want to enter the market.
Harvard Business Review has the highest share of research articles followed by Journal of
Information Technology, Journal of Business Ethics etc.
Although the inception of the concept was in 1998, the extrapolation of the concept towards
innovating for the BOP wasn’t reported until 2002. The works of Prahalad and Hammond (2002)
illustrated the buying potential of the so called poor and indicated why MNEs should be investing
in these markets rather than following the markets they are already in. Such a thought process
was illustrated with a number of examples which marked the beginning of the application of BOP
concept for innovation. This article gave a clear picture of the misconceptions regarding BOP and
the reluctance of MNEs to invest due to “assumed” constraints.
Following the publication by Prahalad and Hammond, the next few years didn’t see any major
improvements in the BOP driven innovation canvas. The conversion from an idea to a reality
took almost six years and the works of Vikram Akula (2008) further reinstated the hypothesis that
business can profit by investing in BOP. He provided three principles through which a firm can
succeed in BOP driven innovation sphere. First, Adopt a profit-oriented approach in order to access
commercial capital; boost capacity by standardizing products, training and other processes; and use
the latest technology to reduce costs and limit errors.
Post 2008, there was a steady increase in the number of research publications on BOP driven
innovations and the themes of such research improved from an ideation towards a more practical
oriented approach. Over the years, there was social inclusion into business processes which involved
taking BOP demands into account while innovating (Vishwanathan et al., 2009) followed by
inclusion of corporate citizenship with an aim to improve the quality of life of BOP (Hahn, 2009).
In 2011, the paper by Karamchandani (2011) urged MNEs to rethink their business models in order
to orient them towards BOP. This paper in particular raised the relevant question of whether the firm
is competent enough to venture into BOP innovations or not. This article can serve as a checklist
which tells the firm about the challenges of BOP and the potential benefits of venturing into BOP
markets. Rangan et al. (2011) further added to this by segmenting the BOP by categorising the risks
and uncertainties involved in value creation in the BOP segment.
The year 2012 saw the maximum number of research publications on BOP driven innovations with
the landmark publication by Prahalad (2012) titled “BOP as a source of breakthrough innovations”.
This paper identified the bottom of the pyramid (BOP) markets as a new source of radical innovation.
By focusing managerial attention on creating awareness, access, affordability and availability
(4As), managers can create an exciting environment for innovation. Prahalad also cautioned against
constraints of such BOP driven innovation but concluded by saying that if identified properly, even
the constraints will work in favour of the firm. From BOP market driven innovation, the research
was directed towards community empowerment and social capital development and new product
development with focus on BOP.
From the year 2013 to 2018, there was a steady development in the themes of BOP driven innovation.
Over the years, BOP has been regarded as a source of intellectual property along with idea providers
for radical product, process and behavioural innovations. The literature of BOP driven innovation
has improved drastically over the years. Although the incubation period for BOP driven innovation
took almost ten years from the introduction of the concept, the steady increase of the application of
it has been fast growing and looks promising for the future.
Reference
Agarwal, N., Grottke, M., Mishra, S. & Brem, A. (2017). A systematic literature review of constraint-based innovations:
state of the art and future perspectives. IEEE Transactions on Engineering Management, 64(1), 3-15.
Agnihotri, A. (2013). Doing good and doing business at the bottom of the pyramid. Business Horizons, 56(5), 591-599.
Akula, V. (2008). Business basics at the base of the pyramid. Harvard Business Review, 86(6), 53.
Ansari, S., Munir, K. & Gregg, T. (2012). Impact at the ‘bottom of the pyramid’: The role of social capital in capability
development and community empowerment. Journal of Management Studies, 49(4), 813-842.
Antúnez-de-Mayolo, C. (2012). The role of innovation at the bottom of the pyramid in Latin America: eight case
studies. Procedia-Social and Behavioral Sciences, 40, 134-140.
Arora, S. & Romijn, H. (2012). The empty rhetoric of poverty reduction at the base of the pyramid. Organization, 19(4),
481-505.
Ausrød, V.L., Sinha, V. & Widding, Ø. (2017). Business model design at the base of the pyramid. Journal of Cleaner
Production, 162, 982-996.
Calton, J.M., Werhane, P.H., Hartman, L.P. & Bevan, D. (2013). Building partnerships to create social and economic
value at the base of the global development pyramid. Journal of Business Ethics, 117(4), 721-733.
Chatterjee, S. (2016). Articulating globalization: Exploring the bottom of the pyramid (BOP) terrain. Organization
Studies, 37(5), 635-653.
Foster, C. & Heeks, R. (2013). Innovation and scaling of ICT for the bottom-of-the-pyramid. Journal of Information
Technology, 28(4), 296-315.
Hahn, R. (2009). The ethical rational of business for the poor–integrating the concepts bottom of the pyramid, sustainable
development and corporate citizenship. Journal of business ethics, 84(3), 313-324.
Hahn, R. & Gold, S. (2014). Resources and governance in “base of the pyramid”-partnerships: Assessing collaborations
between businesses and non-business actors. Journal of Business Research, 67(7), 1321-1333.
Hart, S., Sharma, S. & Halme, M. (2016). Poverty, business strategy and sustainable development.
Kaplinsky, R. (2011). Schumacher meets Schumpeter: Appropriate technology below the radar. Research Policy, 40(2),
193-203.
Karamchandani, A., Kubzansky, M. & Lalwani, N. (2011). Is the bottom of the pyramid really for you. Harvard Business
Review, 89(3), 107-111.
Kolk, A., Rivera-Santos, M. & Rufín, C. (2014). Reviewing a decade of research on the “base/bottom of the
pyramid”(BOP) concept. Business & Society, 53(3), 338-377.
Ladd, T. (2017). Business models at the bottom of the pyramid: leveraging context in undeveloped markets.
The International Journal of Entrepreneurship and Innovation, 18(1), 57-64.
Mason, K., Chakrabarti, R. & Singh, R. (2013). What are bottom of the pyramid markets and why do they
matter?. Marketing Theory, 13(3), 401-404.
Nakata, C., & Weidner, K. (2012). Enhancing new product adoption at the base of the pyramid: a contextualized
model. Journal of Product Innovation Management, 29(1), 21-32.
Nogami, V.K.D.C., Vieira, F.G.D. & Veloso, A.R. (2018). Concept of innovation in low-income market. Revista
Brasileira de Gestão de Negócios, 20(1), 127-149.
Oliveira, G.M. & Carvalho Machado, A.G. (2016). Innovation in services for the bottom of the pyramid in the retail
sector. REVISTA CIENCIAS ADMINISTRATIVAS, 22(2), 423-450.
Olsen, M. & Boxenbaum, E. (2009). Bottom-of-the-pyramid: Organizational barriers to implementation. California
Management Review, 51(4), 100-125.
Pansera, M. & Martinez, F. (2017). Innovation for development and poverty reduction: an integrative literature
review. Journal of Management Development, 36(1), 2-13.
Pansera, M. & Owen, R. (2015). Framing resource-constrained innovation at the ‘bottom of the pyramid’: Insights from
an ethnographic case study in rural Bangladesh. Technological Forecasting and Social Change, 92, 300-311.
Prahalad, C.K. (2012). Bottom of the Pyramid as a Source of Breakthrough Innovations. Journal of Product Innovation
Management, 29(1), 6-12.
Prahalad, C.K. & Hammond, A. (2002). Serving the world’s poor, profitably. Harvard business review, 80(9), 48-59.
Rangan, V.K., Chu, M. & Petkoski, D. (2011). Segmenting the base of the pyramid.
Rogers, E.M. & Shoemaker, F.F. (1971). Communication of Innovations; A Cross-Cultural Approach.
Sadasivan, E., Das, M. & Bhattacharya, S. (2017, January). Design for Communities: An Entrepreneurial Approach to
Solve the Problems of Society and Environment Fuelled by Product Design. In International Conference on
Research into Design (pp. 127-137). Springer, Singapore.
Shivarajan, S. & Srinivasan, A. (2013). The poor as suppliers of intellectual property: A social network approach to
sustainable poverty alleviation. Business Ethics Quarterly, 23(3), 381-406.
Simanis, E. (2012). Reality check at the bottom of the pyramid.
Simanis, E. & Duke, D. (2014). Profits at the bottom of the pyramid. Harvard Business Review, 92(10), 86-93.
Singh, R., Bakshi, M. & Mishra, P. (2015). Corporate social responsibility: Linking bottom of the pyramid to market
development?. Journal of Business Ethics, 131(2), 361-373.
Tarafdar, M., Singh, R. & Anekal, P. (2013). Impact of ICT-enabled product and process innovations at the Bottom of
the Pyramid: a market separations perspective. Journal of Information Technology, 28(4), 279-295.
Varadarajan, R. (2009). Fortune at the bottom of the innovation pyramid: The strategic logic of incremental innovations.
Business Horizons, 52(1), 21-29.
Varman, R., Skålén, P. & Belk, R. W. (2012). Conflicts at the bottom of the pyramid: Profitability, poverty alleviation
and neoliberal governmentality. Journal of Public Policy & Marketing, 31(1), 19-35.
Viswanathan, M., Seth, A., Gau, R. & Chaturvedi, A. (2009). Ingraining product-relevant social good into business
processes in subsistence marketplaces: The sustainable market orientation. Journal of Macromarketing, 29(4),
406-425.
Arkhipova Marina
National Research University Higher School of Economics
E-mail: archipova@yandex.ru
Khodzhaeva Anastasiia
National Research University Higher School of Economics
Email: khodznastya@yandex.ru
Abstract
Digital inequality is an important social problem of the present and if it does not have a significant sociological,
socio-philosophical and legal consideration, then it can lead to significant negative consequences. With the advent
of new information and communication technologies (ICT), the problem of digital inequality is becoming more
urgent in the modern world, therefore it is necessary to conduct current analyzes to identify current problems,
since they can change along with the dynamics of ICT development. There are many studies of digital inequality
in the world, but there are few such statistical researches for Russia. In this paper we analyze the problem of digital
inequality in Russia taking into account the specific characteristics of the country.
Within the framework of the study, using econometric tools, the main groups of factors influencing the inequality
in access to information and communication technologies in Russia were identified and Russia’s place in the world
rating of accessibility and use of ICT was determined. A special index was calculated for the Russian regions,
reflecting the level of their digitization. In addition, the main clusters of Russian regions were determined according
to the level of ICT development, a conditional map of access to technologies was developed.
In the study the impact of the age structure of the population and economic factors on digital inequality were
identified. It was also found that the policy of the state to address the digital divide in recent years has been quite
successful. With the help of the calculated index of digitisation of the population of Russia, groups of regions that
differ in the level of ICT development were identified and the differences in the average values of clusters were
high. However, there is a tendency to narrow the gap and in order to prevent its increase, first, it is necessary at
least to adhere to the current policy to increase the digitisation of the population, as well as to pay attention to
the increase in the level of information literacy of the population, which is also the main obstacle to development.
However, we must not forget the complex geography, which greatly hinders the bridging of the digital divide
between regions.
This paper includes practical utility. First, it shows what the government should pay attention to in order to
minimize the problem of local digital inequality. Then, the developed research methodology can also be applied to a
country with similar specifics to analyze the level of digital inequality.
Keywords: Digital Inequality, Modeling, Groups of Regions, Level of ICT, Digital Divide
1. Introduction
Nowadays, advanced technologies and innovations play a significant role in economic development,
which generates a digital economy. With the development of the digital economy, the problem of
the digital divide is increasingly felt. The digital divide means an inequality in the opportunities for
physical, technical and social access to new media, especially the Internet. As a term of scientific
knowledge, it appears in the 1990s, describing information inequality through economic, political
and socio-cultural restrictions on access to the Internet. Digital inequality is a problem not only for
individuals, but also for whole countries and regions. It should be noted that not only the availability
of technological resources, updated information, but also the difference in these technologies and
the ability to use them plays an important role in the formation of the information society and the
solution of the issue of digital inequality. Digital divide leads to the fact that the information poor
are excluded from the modern information economy, which further increases the gap between the
rich and the poor at different levels. According to many researchers, the main thing in eliminating
the digital divide is not so much in providing access to information and communication technologies
as in the ability to derive social benefits from their use.
1
This work was supported by a grant of Russian Foundation for Basic Research №18-010-00564 Modern Tendencies and Social
and Economic Consequences of Digital Technologies Development in Russia
2. Literature review
Digital inequality can be viewed from the point of view of different approaches. The first approach
is global; there are big differences between developed and developing countries in terms of access
to a number of ICT services and technologies, such as Internet access or the use of mobile phones.
The second approach is local, at the level of households in a particular country. Accordingly, various
factors of influence are distinguished on different approaches.
The initial use of the term “Digital divide” as physical access to the Internet assumes a binary
approach, but often ignores the multi-layered approach. Multilevel models are based on technical and
social access to the Internet. “First-Level Digital Divide” and “Second-Level Digital Divide” were
identified in this approach (DiMaggio, Hargitai, 2001). In the case of second-level digital divide,
factors such as age, formal education and experience of working on the Internet have the greatest
impact on the problem. Moreover, there is a positive effect of formal education on digital inequality.
In addition to physical access and use, multilevel models also include the level of acceptance: the
ability to correctly evaluate and select information.
According to Dijk (2005), both personal and positional factors play a significant role in the uneven
distribution of access to digital resources. In this case, personal factors include age, gender, ethnicity
or health; position factors include formal education, profession and place of residence.
The impact on the use of ICT income and education, which can be indicative of socioeconomic
status, has also been proved in the work of Hsieh, Rai and Keil (2011). These variables were used
for further analysis. The authors conducted a survey on the use of the Internet within a single
municipality and conducted 784 surveys, the results of which were used in further analysis.
Two groups were identified with the help of cluster analysis: the socially-economically advantaged
and the socially-economically disadvantaged. To extract these clusters, Ward’s hierarchical method
was used. However, most of the observations fell into a socially-economically advantaged group.
Nevertheless, at the same time, demographic factors together with the results of non-parametric tests
showed a large gap between the groups obtained. Households that fell into a socio-economically
disadvantaged group were characterized by low incomes and education, comprised of older
individuals and resident women.
However, differences in the use of the Internet can be due not only to socio-economic status, cost
factors and accessibility. Guillen and Suárez (2005) tested the hypothesis that political, regulatory
and social aspects can affect the digital divide. In addition to the variables that are already familiar
in all studies and that reflect the socio-economic status, variables reflecting the country’s policy
in the field of communications (the type of privatization of telephone companies, competition in
the telephone services market) were added to the sample. These variables were introduced into
the model as dummy variables. In addition, the model included variables reflecting the level of
democracy in the country, which was measured on a ten-point scale. The main analysis was carried
out using linear regression from panel data, regression model by the least-squares method and model
with dummy variables.
As for Russian authors, Volchenko (2016) made the contribution to the study of digital inequality.
Based on the survey data on the use of the Internet in Russia, a multinomial binary logistic regression
was built. The finding obtained in the course of the study confirm the results of the studies of foreign
authors. The greatest influence on the use of the Internet in Russia was provided by such factors as
age and education of respondents, as well as their income and place of residence.
It is also possible to note the growth in access not only to the ordinary Internet in the country, but to
broadband access (figure 1). Improving access in Russian reality is a clear indicator of the quality
of the population digitization policy, since with such a geography it is not an easy task to access
broadband networks in all hard-to-reach locations. It is also worth noting the high growth in access
to broadband networks in recent years.
the network, while at the same time developing their skills and information literacy. Over the past
two years, the number of users who received government services in electronic form has increased
almost one and a half times and reached 51.3% (most users in the age group from 15 to 44 years).
The older population, even with the discounts and privileges provided, prefers to use the old ways
of obtaining these services.
A person’s place of residence also has a huge impact on the digital divide in Russia. There is a
division into urban and rural populations. The agricultural industry is the main activity for a number
of regions. In such regions, the level of informatization of the population is lower. This directly
affects the interregional digital divide as a whole.
Thus, the current trends show the success of the state in providing access to ICT, but at the same time
there is a lack of skills among the population, as well as a lack of desire to use the provided ICT,
especially in rural areas and in older age groups.
Using the Kaiser criterion and analyzing the graph of the scree criterion, the number of components
was determined. For a more accurate analysis, we also analyzed the variance and the total contribution
of the component data. As a result of the analysis, three main components were identified.
With the help of the matrix of factor loadings, previously rotated by the Varimax method, the source
characteristics associated with the components obtained were determined. The first component
displays access to ICT (Internet, computer, telephone), the second component displays the level of
use of the Internet, the third component displays the level of use of the broadband network and the
level of access to it.
Figure 2: Graph of the Accumulated Contribution of the Principal Components to the total Variance
Component 1 2 3
K 95,88 79,96 93,22
Thus, for further research, a unique index of digitisation in Russia was calculated. This index displays
the country’s characteristics in the ICT access level and their use and can be used for further analysis
as the main variable. The calculations also showed that the gap in access and use of wired networks
is wider than the gap in access to basic information and communication technologies. The calculated
index also indicates the heterogeneity of digital development that needs to be analyzed. A positive
factor is that there is an annual decrease in digital inequality in the absolute values of the index.
The results of the calculated aggregate variable and regression model showed heterogeneity of
digital development in Russia. Since the regions of Russia differ significantly in the level of access
and use of information and communication technologies, the purpose of the cluster analysis is to
identify homogeneous groups in terms of digitisation.
To determine regional differences, a multidimensional classification of regions was carried out using
the Ward method of cluster analysis. The cluster analysis was performed for variables reflecting
access to ICT, use of ICT and access and use of broadband Internet (figure 3). Ward’s method
showed the possibility of dividing the sample into three clusters, which reflect regional differences
in the level of digitisation. It is worth noting that the samples are heterogeneous. There is a negative
trend for regions with agricultural focus, as they were mainly in the group of lagging regions.
Developed regions are primarily characterized by high per capita incomes and consumer spending,
as well as a high proportion of the urban population. Some regions of the developed group are in
close proximity with developed European countries that can also affect the development of ICT.
The largest regions are in a group of developing regions, despite the fact that their geographical
conditions and infrastructure are not ideal for the dissemination and development of some ICTs,
especially the Internet.
In order to determine how significant the differences in the clusters are, the equality of the mean
values in them was checked. The hypothesis about the equality of the average values in the cluster
was rejected for all variables entered. There are significant differences between the clusters in the
level of accessibility and use of information and communication technologies and the government
should continue to work on reducing the digital divide, not only on the world stage, but also at the
local level.
6. Conclusion
The state policy in Russia regarding the provision of access to ICT in recent years has been working
quite successfully. Analysis of the features and factors affecting inter-regional differences was
conducted with the help of the calculated index of digitisation of the population of Russia. Groups of
regions differing in the level of ICT development were identified, but differences in average values
of clusters turned out to be low. There is a significant interregional digital divide between in Russia
and in order to prevent its increase, firstly, it is necessary to at least follow to the current policy of
increasing the digitisation of the population and also pay attention to the increase in information
literacy of the population.
The main inhibition of development is also the level of information literacy. Complex and extensive
geography also greatly hinders the bridging of the digital divide between the regions, but since
development does not stand still, these differences can be remedied.
Russia belongs to the group of countries with developing information and communication technologies
in the international arena. However, in this group it takes not the last place. This means that together
with the ambitious tasks of the government to increase the level of digitisation in the country, in
the near future Russia has a chance to be in the group of countries with developed information and
communication technologies, as well as reduce digital inequality at the interregional level.
References
Büchi, M., Just, N., Latzer, M., (2016), Modeling the second-level digital divide: A five country study of social
differencesin Internet use, New Media & Society, 18 (11), 2703-2722.
Dijk, J.A., (2005), The Deepening Divide: Inequality in the Information Society, Thousand Oaks. CA: SAGE
Publications, Inc.
DiMaggio, P., Hargittai, E., (2001), From the «digital divide» to «digital inequality»: Studying Internet use as penetration
increases. Princeton: Center for Arts and Cultural Policy Studies, Princeton University, WP No 15.
Guillen, M.F., Suárez, S.L., (2005), “Explaining the Global Digital Divide: Economic, Political and Sociological Drivers
of Cross-National Internet Use”, Social Forces, Vol. 84, No. 2, 681-708.
Hsieh, J.J.P.A., Rai A. and Keil M., (2011) Addressing Digital Inequality for the Socioeconomically Disadvantaged
Through Government Initiatives: Forms of Capital That Affect ICT Utilization, Information Systems
Research, Vol. 22, No. 2, 233-253.
Volchenko, O.V., (2016), Dynamics of Digital Inequality in Russia, Monitoring of Public Opinion: Economic and Social
Changes, 5, 163-182.
Eyad Buhulaiga
University of Johannesburg, Faculty of Engineering and
The Built Environment, South Africa
E-mail: eyad.buhulaiga@gmail.com
Arnesh Telukdarie
University of Johannesburg, Faculty of Engineering and
The Built Environment, South Africa
E-mail: arnesht@uj.ac.za
Adeeb Albukhari
University of Queensland, Faculty of Engineering, Architecture and
Information Technology, Australia
E-mail: a.albukhari@uq.net.au
Abstract
Achieving operational excellence and producing the perfect product (right quality, right quantity, right time for
right customer) is a common objective of all major manufacturers. This is done via introducing corporate programs,
disrupting technologies, projects and initiatives that introduce changes to the way a business is conducted.
The changes can be with respect to business process improvement, change in the roles and responsibilities, and
re-organization . This impacts the employees of the organization who implement the change and requires to be
managed properly to improve the adaptability and increase the effectiveness of the change. The change becomes
significantly challenging in multinational organizations which are located across the globe. Multinationals
needs to consider, not only the changes imposed by the new tools, but also the changes involved with dealing
with organizational and international cultures. In this paper, the key success factors of multinational business
optimization change management are discussed in detail. The paper focuses on the impact of the human factor
on the success of user performance improvement and adoption rate based on a successful change management
program. The paper also provides the results of a qualitative research study that emphases the effective of change
management. The paper highlights the three level of change management (system initiative, organization and most
importantly individuals). Despite the fact that senior management direction is a key success factor, the research
results indicates that middle management plays a major role. Significantly impacting the success of the change.
Depending on the size, speed and number of simultaneous changes, the change management program needs to be
carefully designed to increase the level of adoption. The fair practices involved from the very beginning is another
factor that gives the user the feeling of ownership. The paper helps organization in deploying complex systems
while addressing cultural, social and human Issues. It provides a guideline that helps organization transferring
technology while highlighting the importance of management role and partnership in deploying disruptive
technology.
Keywords: Change Management, Multinational Businesses, Manufacturing Industry, Business Transformation,
Transforming Change
1. Introduction
Achieving operational excellence and producing the perfect product (right quality, right quantity,
right time for right customer) is a common objective of all major manufacturers. The disruptive
technologies introduced by the fourth industrial revolution (IR4.0) has left manufacturers with
no other choice but to adapt and introduce corporate programs, disrupting technologies, projects
and initiatives that introduce changes in the way of conducting business, to remain competitive
(Rowlands et al., 2015). The change resulted from adopting IR4.0 impacts not only the workers’ jobs
but includes business process improvement, change of roles and responsibilities and reorganization
to change the organization structure and functions. This impacts the employees of the organization
implementing the change which requires proper management to improve the adaptability, reduce
the stress level and increase the effectiveness of the change. The change becomes more challenging
when it comes to multinational organizations that spread across the globe that needs to consider not
only the changes imposed by the new tools but also the changes involved in dealing with different
organizational and international cultures (Rowlands et al., 2015). In this paper, the key success
factors of multinational business optimization change management are discussed in detail.
2. Review of Literature
Most of the current jobs, skill-sets and education systems are not tailored to suit IR4.0. The move
from rigid and static business process and systems into dynamic and adaptive systems requires a
transformational paradigm shift in the way of thinking, training and skills. The World Economic
Forum (2016) estimated that 30% of the skills needed for jobs in 2020 are not receiving the required
attention. The focus of the future workers will be on the complex problem solving, cognitive abilities,
system, information and communication technology skills. These skills are required to manage
different components of complex Cyber-Physical Systems (CPS) including managing systems,
databases, coding of robotics and Artificial Intelligence (AI) algorithms, and developing advanced
applications (Hiatt, 2006). Digital transformation, integration and automation of work processes
opens new innovative environment that allows workers, regardless of experience and skill-set level,
to think outside the box and operate outside the normal working activities (Scholz, 2015). This
mandates the workers to adopt continues multidisciplinary and multicultural learning, combining
hard-skills of specific job know-how with soft-skills associated with the use of the new digital
tools and technologies (e.g. complex problem solving, collaboration, coordination, communication,
critical thinking, service orientation, creativity, decentralization, autonomy, etc.). This is a joint
effort that needs to be done by both workers to stay fit for the job and manufactures deploying IR
4.0 technologies. These skills are usually referred to as STEM (Science, Technology, Engineering
and Mathematics) (Guynamant , 2015). In order to be IR4.0-ready and as part of talent preparation
and development, both manufactures, and workers must adopt a new dynamic training paradigm that
allows for rapid learning and development. This moves workers from being just doers of tasks into
being digital workers and innovators. Despite the current unemployment rates worldwide, recent
CEO survey revealed that market lacks knowledgeable and IR4.0-ready workforce. This forces
manufacturers to develop special programs for change management and digital talent development
with a focus on the current and future required skill-sets (Hansell , 2018).
80% of companies’ knowledge are in its personnel heads or in a format that are not accessible, which
cause the employees to spend tremendous amount of time (up to 50% of time) in allocating data. It
also increases the vulnerability and risk of losing manufacturers knowledge and wisdom due to the
loss of the minds holding this knowledge. Bases on this, manufacturers need to mitigate the risk of
knowledge loss by (Guynamant, 2015):
a. Identify important and crucial knowledge elements and resources
b. Identify the process owners and experts of the aforementioned knowledge elements and
resources to evaluate the risk of loss and rate of retention
c. Quantify the risk and identify the potential of knowledge loss due to retirement,
resignation, etc.
d. Develop change management plans to:
●● Document the manufacturer’s knowledge and crowd’s wisdom from the global
offices
●● Bridge the knowledge/expertise gap via detailed learning and development plans
for process owners’ successors
●● Increase the level of automation to reduce the reliance on human
e. Measure the effectiveness of knowledge transfer and documentation
2.4. The Role of Middle Managers in Change Management and Business Transformation
Despite the fact that senior management direction is a key success factor in implementing IR4.0,
CPS and digital transformation, previous research results indicates that middle management plays
a major role, significantly impacting the success of the change. Depending on the size, speed and
number of simultaneous changes, the change management program needs to be carefully designed to
increase the level of adoption. The fair practices (i.e. involving people impacted by the change) and
engagement from the very beginning is another factor that gives the user the feeling of ownership.
Middle managers need to pay special attention to the experts and address expectations to ensure that
knowledge and expertise are retained (Lunts, 2012).
The following describes the key success factors that need to be followed by middle managers with
the support of senior management to improve the acceptance of a multinational business optimization
change management program. It focuses on the impact of the human factor on the success of user
performance improvement and adoption rate based on a successful change management program
and highlights the three level of change management (system initiative, organization and most
importantly individuals).
3. Research Methodology
c. Emergence that consists of the forces influencing the change (top-down or bottom-up
directions), level of adaptability, means of change communication and control.
d. Adaptation that focuses on measuring the level of tension caused by the change and the
ability of organization to adapt with the newly introduced business process and tools
Previous research recommends using the Engineering Change Management (ECM) process that helps
manufacturers to cover the end-to-end manufacturing lifecycle. It helps in achieving operational
excellence and producing the perfect product with an input from all stakeholders within the value
chain. This is done by integrating the manufacturing and plant floor information along with the
control and ERP systems to help manufacturers in (Wu et al., 2014):
a. Increasing efficiency by providing real-time access of data to all stakeholders while
ensuring the whole enterprise is using a consistent data (single-version of truth).
b. Improving profitability by producing the products with the right specification to avoid
off-specs product quality while maintaining the least production cost.
c. Improve Human Resources effectiveness by ensuring the use of common standard
processes and terminology across the enterprise, despite the different geographical
location or business lines.
ECM recommends using a systematic approach to implement the change that covers all manufacturing
phases as follows (Wu et al., 2014):
In addition, senior management members have to consider the strategic talent management and
human capital management best practices that include (Guynamant, 2015):
●● Allocating time and resources dedicated to the change management activities
●● Developing middle managers to:
oo Have the ability to hire, train, encourage and retain personnel that make the
maximum use of the CPS implementation
oo Understand what motivate the manufacturers experts (e.g. challenging tasks,
understanding the link between this task and overall strategic objective and
appreciation) to be able to increase the level of productivity
oo Avoid the user of power to eliminate the threat of disqualification which
negatively impact the performance, create tension and demotivation
oo Avoid focusing on some experts and underutilizing others which creates stressful
situation for some employees and apathy on the remaining underutilized ones
c. Manage the pace of change: the changes imposed specially the revolutionary ones can be
overwhelming to the involved parties. This can be challenging in teams that are separated
by geographical boundaries and are not co-located in the same location where there is a
possibility of having some disengaged organization. This mandate:
●● Paying special attention to the continues involvement of all concerned parties
●● Having a massive and periodic communication plans
●● Providing incentives to the most impactful change advocates with appreciation for
peer support and effective networking
b. Next waves have to be designed in a gradual format to minimize the impact of change
and increase the level of adaptability.
To visualize the above phases, the above diagram illustrates the overlap between these phases
Change Deployment Phase: This phase is the heart of the change management program. It focuses
on deploying the change management interventions that were planned during the Change Foundation
phase. It ensures that the organization and the stakeholders are committed toward the change.
Change Sustainability Phase: The objective of this phase is to ensure that the change management
program is running effectively and efficiently. It also ensures that the change is always aligned
with the business transformation objective. In this phase, it is essential to assess the organizational
awareness and maturity level in the context of business transformation. Based on the results of
the assessment, the change management sustainability plan is developed with concentration on the
planned interventions in the Change Deployment phase. To maximize the positive outcomes of
the change management program, the phase considers running change deployment in parallel or in
sequence.
Business transformation is a long journey. It is not expected to harvest its desired benefits from
the day one. During the Change Sustainability phase, significant outcomes is realized by effective
business transformation program. This results in the positive outcome of the performance of the
organization carrying the business transformation. With an effective change management program,
the positive outcome is maximized, immediately after recovering from the performance dip.
However, the absence of a good change management program, the outcome after the performance
dip is unpredictable. Such absence of an effective change management program might result in a
costly and disappointing result.
5. Conclusion
The successfulness of the change management program is not achieved by completing the checklist
of the change strategy. It must measure the success at the individual level by measuring the
human dimension of the change. It is important to realize that “organizations don’t change, people
within organizations change”. Importantly, managing the people side of change eventually yields
disappointing results.
References
Alas, R. (2015). Resistance to institutional and organizational change: an individual perspective. In Change Management
and the Human Factor (pp. 153-165). Springer, Cham.
Andersen, T. (2015). Organizational development in an international context: A story of planned change and attempt to
induce high involvement. In Change Management and the Human Factor (pp. 179-189). Springer, Cham.
Antonellis Jr, P. J. (2016). Change Management: Recommendations for Prechange Success. Fire Engineering, 369(8), 49
Butt, F. S., Nawab, S., & Zahid, M. (2018). Organizational Factors and Individual Effectiveness: Moderating Role of
Change Management. Pakistan Journal of Psychological Research, 33(1).
Guynamant, B. (2015). The Role of Management Development in Change Management: The Example of Financial
Markets. In Change Management and the Human Factor (pp. 59-76). Springer, Cham.
Hansell, V. (2018). Identifying the prevalence of influential factors on middle managers’ abilities to lead organizational
change within the context of community nursing and therapy services. International Journal of Healthcare
Management, 11(3), 225-232.
Hiatt, J. M. (2006). ADKAR: A model for change in business, government and our community. Loveland, CO: Prosci
Learning Center.
Kotter, J., Dr. (n.d.). Kotter’s 8-Step Change Model. Retrieved November 11, 2018, from http://www.strategies-for-
managing-change.com/support-files/kotterchangemodel.pdf
Lipiński, R., & Jamro, K. (2017, December). Information Flow Model: a Versatile and Effective Change Management
Model. In ECMLG2017 13th European Conference on Management, Leadership and Governance: ECMLG
2017 (p. 253). Academic Conferences and publishing limited.
Lunts, P. (2012). Change management in integrated care: what helps and hinders middle managers–a case study. Journal
of Integrated Care, 20(4), 246-256.
Mcintosh, J., Alonso, A., Maclure, K., Stewart, D., Kempen, T., Mair, A., Wiese, B. (2018). A case study of polypharmacy
management in nine European countries: Implications for change management and implementation. Plos
One,13(4). doi:10.1371/journal.pone.0195232
Rowlands, K. E., & Rees, C. J. (2015). Organizational Change and Workplace Stress in Teaching and Learning Settings:
Case Study Evidence from a Public Sector University in the UK. In Change management and the human
factor (pp. 167-178). Springer, Cham.
Scholz, T. M. (2015). The human role within organizational change: A complex system perspective. In Change
Management and the Human Factor (pp. 19-31). Springer, Cham.
Wu, W. H., Fang, L. C., Wang, W. Y., Yu, M. C., & Kao, H. Y. (2014). An advanced CMII-based engineering change
management framework: the integration of PLM and ERP perspectives. International Journal of Production
Research, 52(20), 6092-6109.
George Maluleke
University of Pretoria, Department of Engineering and
Technology Management, South Africa
E-mail: george.maluleke@angloamerican.com
Leon Pretorius
University of Pretoria, Department of Engineering and
Technology Management, South Africa
E-mail: leon.pretorius@up.ac.za
Abstract
Introduction and Purpose: The South African economy has continued to struggle in the past decade with slow
growth in Gross Domestic Product (GDP) and the inability of the economy to create jobs. The cost of business has
been raised as one of the obstacles to investment in the economy whereas on the other hand, workers continue to
complain about low wages through various platforms. In their demand for higher wages, workers often raise the
cost of living, accommodation and transport to get to work amongst the key contributors. The cost of logistics has
increased substantially as a percentage of GDP in the past two decades, led mainly by the cost of transport logistics
and technology. The cost of transport is common to the break-even equations for both employment and business
dynamics for low income bracket employees and small business enterprise respectively.
The purpose of the research paper was to establish the impact of non-investment in rail freight logistics and
passenger infrastructure technology in the break-even cost equation for, 1: small businesses and 2: working people
living in the South African metro areas. We assume, based on a linear principle of superposition that the efficiency
of such transport mode will either erode or create sufficient capital to enable entrepreneurship and individual
development. We also analyze the impact of changes in the mode of freight movement between the metros/ business
centers and the key ports of shipping of goods via the ocean to bring to attention the impact of rail capacity on
logistics cost efficiency.
The research into this paper followed a simulation approach which is a method recognized as an alternative to
empirical analysis of data. A system dynamic model was developed using data collated from various statistical
reports published in South Africa and abroad. The model analyses the dynamic impact of cost on potential
development of individual employees and small business using a principle of superposition.
The paper concludes that: lack of investment and poor management of current rail transport system has a negative
impact on the smaller enterprises and lower end employees and by implication negatively impacts the ability of
the economy to generate the necessary employment growth. The findings of this research can be used by policy
makers to determine the priority of investment in infrastructure and related technology to assist the economic
and employment growth. We acknowledge that there may be other factors that affect the ability of South African
economy such as skills, technology and other macro-economic factors that are not directly addressed in this paper.
The study is conducted in part as a contribution to a raging debate in South Africa about the minimum wage as well
as the inability of the economy to create employment.
Keywords: System Dynamics; Entrepreneurship Capital; Cost Differential; Potential Economic Growth;
Superposition
through Richards bay and lately Port Elizabeth. Equally the trade ports of Durban, Cape Town and
Port Elizabeth are linked to the inland manufacturing and trade centres in Johannesburg and Pretoria.
The rail network equally serves the passenger rail services between the major cities of Cape Town,
Durban, Johannesburg and Port Elizabeth. Transnet Freight Rail (TFR) and Passenger Rail Agency
of South Africa (PRASA) are the dominant rail service providers for goods and passenger transport
respectively.
The paper aims to analyse the rail freight and passenger trends between major metros and equally
so the passenger trains service trends within the metros themselves. In analysing the impact of train
service impact, we compare the cost of commuting to work for an average worker using both road
and rail services within the metros selected. The cost of living in the metros for working individuals
is impacted by the cost of transport to and from work. In this paper we argue that the mode of
transport determines the cost of getting to and from work and by extension movement within the
metro. Equally we also argue that the transport of freight and passenger has double impact on the
ability of individual to work and create jobs for others. We contrast this view with the assumption
as part of the problem statement that a saving in this cost element would create sufficient capital for
further development of companies and human capital alike.
as depicted in Figure 2. This distribution has more bias towards a network of road infrastructure
which is already constrained and shows continuing trend.
In their report Transnet Freight Rail (TFR, 2017) highlighted that, despite having rail infrastructure
spanning 30 000km across South Africa, more rail fit goods were still being transported by road.
A study by Price Waterhouse Coopers (PwC, 2017: 72) found that, the impact of decades of
underinvestment in rail transport technology for both freight and passengers has resulted in 89% of
freight depending on road transport.
Figure 3: Passenger Trips by Metrorail and Mainline over a Five-Year Period (Source: PRASA,2016:22)
The trend in South African public transport industry is in direct contrasts with global trends highlighted
in the report by the International Association of Public Transport (UITP,2017: 7) conducted in 39
countries including a combination of developing countries such as China, Brazil and Turkey and
developed country such as Germany, US and UK. According to the report (UITP,2017:7), public
transport usage has seen a steady increase between the year 2000 and 2015. According to the report
(UITP,2017), the increase was also propelled by a rather more aggressive move into public transport
by large economies such as China, Brazil and Turkey between 2005 and 2015.
The South African decline in the usage of rail as a mode of public transport started in the late 1990s
as depicted in the DBSA report (DBSA, 2007) which depicts the split between rail, bus and taxi
transport usage in Figure 4. The report highlights an overall increase in usage of Mini-bus Taxis
between 1996 and 2003 across all provinces of South Africa. Mini-bus taxis have passenger capacity
ranging between 12 and 15 persons compared to bus capacities ranging 50-65 persons on Buses.
Figure 4: Preferred Mode of Transport for Working Household Trips Per Province (DBSA, 2007:35)
Even though it is beyond the scope of this paper, we note that the increase in usage of mini-bus taxis
as a mode of transport has a direct impact on the maintenance requirements on the road network
due to the increase number of vehicles required. Ittmann and King (2010) also found that the cost of
logistics in general can increase by up to 10% due to bad road conditions. To highlight the impact of
a shift towards the usage of mini-bus taxis we look at the at human development dynamics and the
prevailing environment in SA Metro areas.
consumption relies on functioning transport infrastructure. Negota (2001) further assets that the
improvement of or implementation of new infrastructure is crucial in the improvement of cost of
living for workers and employers alike. A view from Europe shows that, the extent to which an area
of the metro is affordable and attractive is determined by the distance between the residential area
and the places of work and leisure. In their study based on real estate in the Netherlands, Debrezion
et al. (2011:16) found that there is a significant impact on prices of real estate due to accessibility of
train stations with high service level quality.
In the work of Maluleke and Pretorius (2016), a causality was drawn between infrastructure capacity
development and skills development where they argued that as the mineral resource development
value chain transits into more beneficiation and downstream activities, the number of people
employed at skilled level increases. The research methodology used to address the problem context
posed in the section is presented in the following discussion.
3. Research Methodology
To analyse the dynamics of the various elements playing in an investment on rail logistics technology
and its impact on the economy, a system dynamics approach is taken. This approach recognises three
critical elements of a system that were described by Senge (1994) and Sterman (1989) before him
as those that reinforce, balance or limit the behaviour and feedback elements of a system due to
the environment. In describing the three elements of system dynamics Sterman (1989) contends
that human beings are likely to make errors in analysing system dynamics and in doing so, similar
to Repenning (2003) recognises human limitations in as a far as dealing with complexity. The
interaction of the three elements are best described in simulation and used as method of theory
building as described by Davis, Eisenhardt and Bingham (2007:480). Davis, Eisenhardt and
Bingham (2007:480) contend that simulation can be used as an alternative to empirical research to
enable theory building.
Figure 5: Factors Contributing to the Cost of Work for Commuters using Public Transport
The number of connections a commuter needs to get to their place of work and back contributes
to the time they spend travelling. Bogetic and Fedderke (2006:13) find that South African workers
take at least 35 minutes for a single work trip and underperforms its counterparts in the middle and
upper class by more than 6 minutes. Bogetic and Fedderke (2006:13) further highlight that South
Africa, with only 21% paved roads versus 57% and 50% for their counterparts middle and upper-
class countries and Europe respectively compares very poorly. According to the same benchmark
(Bogetic and Fedderke,2006:16), South Africa’s rail density is 16% versus 31% and 33% by middle
and upper-class counterparts and Europe. The comparison done by Bogetic and Fedderke (2006)
highlights the availability of rail and paved roads as a potential constraint to achieving transport
technology efficiencies in South Africa.
Alternatively, the cost of secondary and often rental accommodation to mitigate impact of time and
distance to work is also considered as a contributor to the cost of work. Often, an option to rent
accommodation away from primary home requires that parental assistance is sought for children
while the parents are away for work. Where parents choose to stay at home but travel longer distance
and times to get to work, other forms of secondary parenting such as after-care for children are still
required. For the bottom quintile commuters, part of the journey to work may involve walking. Venter
and Behrens (2005:626) find that 30% of bottom quintile earners in Johannesburg walked to work.
Venter and Behrens, (2005:626) also finds that 50% of the bottom quintile group of Johannesburg
residents had affordability problems. Elements of these literature discussions are included in the
following system dynamics model.
<Disposable
Income>
Freight Unit Cost
Economic
<Entrepreneuriship Growth Individual
Capital> Potential <Freight Unit Commuter Trips
Benchmark
Cost> Passanger Cost
Rail Unit Cost
<Passenger
Unit Cost>
Discretionary Essential Freight <Passenger Unit Road Unit Cost
Trips Cost>
<Valuation <Valuation
Period> Period>
<Road Trips> Passenger Unit
Cost
Valuation Period
Passenger Portential
Cost Margins Freight Transport
SA Journey Service Contribution Rail Capacity
Cost Differential Efficiency Disposable Income Freight
<Valuation
<Rail Trips> <Valuation
Period>
Period> Rail Capacity
Total Comuter Passagener
Business <Rail Freight>
<Essential
Road Freight Freight>
Figure 6: Model Indicating the Impact of Transport Cost on Growth Potential of the Economy
Like what Barlas (1996:185) described as casually-descriptive model, the model is created to
simulate the relationship between “Disposable Income, entrepreneurship capital”, discretionary
trips” as reinforcing variables and balancing variable that include: “freight unit cost, passenger unit
cost” to explain the internal structure. This approach which was described by Repenning (2003), is
used to create an empowered social system out of the non-linearity of the economic system for small
enterprises and ordinary people using the transportation system.
The model uses the “Benchmark Freight Cost “and “Benchmark Passenger Cost” to determine the
“SA Journey Cost differential” and “SA freight Cost Differential” respectively. This difference
becomes crucial in highlighting the extent of the potential wastage for both individual commuters
and freight transporting businesses over time. The annual values accumulate in the stocks denoted as
“Passenger Cost Margins and Freight Cost Margins” respectively. From the potential contribution
denoted by the variable “Disposable Income”, an “Entrepreneurship Capital” value is determined
which is fed back into the “Economic Growth Potential “variable.
The model simulates the cost of transportation using an aggregate of rail and road transport for both
passenger unit cost and freight handling cost. We did this in the model to demonstrate the impact of
the non-investment in rail technology infrastructure since the limitation on rail capacity causes shift
towards road transport as a direct substitution.
Selected Variables
4B
3B 2 2 2 2
2 2 2 2 2 2
2
Ton
2B 2
2 2
2
1B
1 1 1
0 1 1 1 1 1 1 1 1 1 1 1 1
1 2 3 4 5 6 7 8 9 10
Time (Year)
Rail Freight : Current 1 1 1 Road Freight : Current 2 2 2
Selected Variables
200 Rand/Ton
0 Rand 2 2 2 2
2 2 2 2 2
2 2
2 3
2
150 Rand/Ton 3 3 3
3 3 3
-100 B Rand 3 3 3
1 1 1 1 1 1 1 1 1 1 1 31 1
100 Rand/Ton
-200 B Rand
1 2 3 4 5 6 7 8 9 10
Time (Year)
Benchmark Freight Unit Cost : Current 1 1 1 1 1 1 Rand/Ton
Freight Unit Cost : Current 2 2 2 2 2 2 2 2 2 Rand/Ton
SA Freight Cost Differential : Current 3 3 3 3 3 3 3 Rand
On the right-hand side of Figure 7, the graph highlights the impact of the difference in aggregate cost
of moving South African freight compared to international benchmark. This highlights that there is
a negative impact which translates to annual loss of ~R100bn. The significance of the difference in
cost translates into potential capital that could be retained by owners of freight moving businesses.
Whilst it may be argued that the higher cost associated with larger component of the freight being
handled by road, translates to higher revenue for the fright handling business, according to the
logistics survey released by CSIR (2014:80), ~40% of the road transport cost was fuel. This cost
represented ~R110bn in 2014 having risen from R40bn from the previous five years according to the
report (CSIR,2014:80). The significance of the impact of fuel is that historically fuel has risen from
$17/barrel to $147/barrel in 2008 according to Havenga et al. (2010:716). Havenga et al. (2014:6),
further laments the sensitivity of the current logistics to oil prices and concludes that a modal shift
towards rail transportation would yield better efficiencies. Since South Africa imports oil for its
fuel, it can be assumed that a significant cash component of the fuel cost is flighted out of the local
economy every year without necessarily benefiting the local economy.
compared to international average at R10/trip. According to the Statssa statistical release P7162
(Statssa, 2017) the journey cost by road is R30 compared to a rail journey cost of R7.4. The aggregate
Passenger Unit Cost is therefore ~R20 per trip. Figure 8 depicts the difference between the South
African Passenger Unit Cost and Benchmark Unit Cost on the left hand-side graph and highlights the
impact this split has on the aggregate cost of commuter journeys by south Africans when compared
to international benchmarks.
Selected Variables
40
4 4 4 4 4 4 4 4 4 4 4
30
Rand/Trip
20 2 2 2 2
2 2 2 2 2
2 2
10 1 1 1 1 1 1 1 1 1 1 1 1
3 3 3 3 3 3 3 3 3 3 3
0
1 2 3 4 5 6 7 8 9 10
Time (Year)
Benchmark Passanger Cost : Current 1 1 1 1 1 1 1
Passenger Unit Cost : Current 2 2 2 2 2 2 2 2
Rail Unit Cost : Current 3 3 3 3 3 3 3 3
Road Unit Cost : Current 4 4 4 4 4 4 4 4
Selected Variables
30 Rand/Trip
3 3 3
0 Rand
3
3
3
2 2 3 2 2
2 2 3 2 2 2
2 2 2 2
15 Rand/Trip
3
-30 B Rand
3
1 1 1 1 1 1 1 1 1 1 1 1 1
3
0 Rand/Trip 3
-60 B Rand
1 2 3 4 5 6 7 8 9 10
Time (Year)
Benchmark Passanger Cost : Current 1 1 1 1 1 1 1 Rand/Trip
Passenger Unit Cost : Current 2 2 2 2 2 2 2 2 Rand/Trip
SA Journey Cost Differential : Current 3 3 3 3 3 3 3 Rand
Figure 8: Comparing the Difference in SA Cost of Passenger Journey Against International Benchmark
The graph on the right hand-side in Figure 8 highlights that the impact of the South African journey
cost in terms of potential revenue lost per year is ~ R60bn in year 10 of the simulation. The difference
is also indicative of the potential entrepreneurial capital lost to the metro areas due to excessive
transportation cost, the bulk of which is linked to the cost of fuel and driver wages.
Selected Variables
12 3 1 23 1 2 2 2 2 2 2 2
100 3 1
31 1
2 2 2 2 2
3 1 1 1 1
3 1 1
3 1 1
-1.25 T 3
3
Rand*Year
3
-2.5 T 3
-3.75 T 3
3
-5 T
1 2 3 4 5 6 7 8 9 10
Time (Year)
Freight Cost Margins : Current 1 1 1 1 1 1 1 1 1 1
Passenger Cost Margins : Current 2 2 2 2 2 2 2 2 2 2
Portential Transport Contribution : Current 3 3 3 3 3 3 3
Selected Variables
7 B Trip
300 B Rand
4
700 M Ton 2
4
3
1
3.5 B Trip 2
150 B Rand 2 4
1
3
350 M Ton 2 41 3
2 1 3
0 Trip 4
2
4 1 3
0 Rand 2
2
1 3
0 Ton 2 2 3 4
34 1
1 341 341
1 2 3 4 5 6 7 8 9 10
Time (Year)
Discretionary Trips : Current 1 1 1 1 1 1 1 Trip
Total Comuter Business : Current 2 2 2 2 2 2 Trip
Economic Growth Potential : Current 3 3 3 3 3 3 Rand
Essential Freight : Current 4 4 4 4 4 4 4 Ton
Figure 9: The Impact of Passenger and Freight Inefficiency to the Economy over 10 Years
The two graphs in Figure 9 highilight the extent to which additional cash could be retained in the
local economy in a competitive scenario for the cost of freight and commuter services relative to
international prices. The graph on the left hand side of Figure 9 shows that up to R800bn could be
potentially saved from freight handling at current payloads. The graph equally shows that almost R4
trillion is lost to the economy due to transport inefficiencies over a 10 year period.
On the right hand side of Figure 9, the graph shows that by asuming that the additional saving
would enable more people to work and travel because they have additional money in their pockect
than they do now, this would translate into additional or discretinary trips, further increasing the
transport business and impact on the overall economy. This view is also reinforced by Chen et al.
(2010:100)’s argument that early success in venture capital is reinforced when new entrepreneurs
seek funding from the same region based on previously success in investment.
Selected Variables
30 Rand/Trip 3
-8000 Rand 3 3
3 3 3
3 3 3 3 3
3
2 2 2 2
2 2 2
2 2 2 2 2
15 Rand/Trip
-14,000 Rand
1 1 1 1 1 1 1 1 1 1 1 1 1
0 Rand/Trip
-20,000 Rand
1 2 3 4 5 6 7 8 9 10
Time (Year)
Benchmark Passanger Cost : Current 1 1 1 1 1 1 1 Rand/Trip
Passenger Unit Cost : Current 2 2 2 2 2 2 2 2 Rand/Trip
Entrepreneuriship Capital : Current 3 3 3 3 3 3 3 3 Rand
Figure 10: Impact of Journey Cost Difference on Individual Commuter Annually
The graph in Figure 10 shows that on an annual basis, a single commuter traveling to work using
a mix of trains, taxis and buses in South African loses ~R10 000 per annum. This is a significant
amount for many South Africans who earn below R72 000 per annum. This is the closest to individual
impact that the lack of investment in rail infrastructure and the occupation of the public transport
space by taxis and buses can be highlighted.
6. Conclusion
The results of the simulation conducted for this paper highlight that South Africa, compared to other
economies in the world seems to have an inefficient technology usage in the commuter transport
system in aggregate terms. The analysis of the cost flow points to a significant additional annual cost
of travelling for an increasing commuter population. The limited availability of the rail technology-
based transport has gradually increased the shift towards road transport technology and this is
attributed to the lack of investment in rail network over some decades. The analysis in Figures 7
and 8 points to the excessive bias towards road transportation technology use and the latter’s high
cost per journey as the key driver of the cost inefficiencies. Internationally, the study conducted by
the International Association of Public Transport (UITP, 2017:1) highlighted that global usage of
public transport has either increased or remained steady between the year 2000 and 2015. The study
(UITP,2017:2) further highlights the correlation between urban population size and the number of
journeys per capita and we find similar patterns in South Africa. The International Association of
Public Transport (UITP,2018) conclude that, with the ever-growing urban population and challenges
of carbon emission, a modal shift to rail-based transport technology is required as the mode of the
future.
When analysing the extend of potential capital lost due to excessive cost of transportation, we conclude
that an opportunity is lost for a creation of entrepreneurial capital needed for entrepreneurship in
the metro areas where many South Africans live. To support our conclusion, we also relied on
several research outcomes that support modal shift towards rail transport technology and its impact
on entrepreneurship capital and employment growth. Acs (2006:100) finds that global trends in
developed economies have shifted to economic activities dominated by small entrepreneurs. The
emphasis is on some form of entrepreneurship and there is no bias towards is either opportunity
entrepreneurship as described in Glaeser et al. (2015) or social entrepreneurship described in Peredo
and McLean (2006). The objectives of both forms of entrepreneurship serves the purpose of creating
value to human life and jobs. Glaeser et al. (2015:26) adds that that there is a causal link between
growth in entrepreneurship and urban employment. The study on impact of rail transport access in
the Netherlands (Ghebreegziabiher et al., 2016:16) concluded that accessibility to a quality railway
station for commuters has a significant effect on real estate prices. Ittmann and King (2010) also
conclude that an intermodal solution that incorporate rail is necessary for metro areas. Ittmann and
King (2010) further asset that small enterprises are critical in creating employment and that this
sector needs a freight handling solution that is efficient and affordable.
This paper however considers that successful entrepreneurship is not automatically created
by availability of entrepreneurial capital and agree with Teece (2007:1347) who concluded that
the development and success of enterprises over time is dependent upon the enterprise ability to
sense changes, seize the opportunity and reconfigure itself to adapt to changing environment and
opportunities. We caution as Olawale and Garwe (2010:730) and in the case of Germany Block and
Wagner (2010) did that opportunity or social entrepreneurship described by Peredo and McLean
(2006) and not necessity entrepreneurship would create an economic growth in the metro areas.
References
Acs, Z., (2006), How is entrepreneurship good for economic growth? Innovations, 1(1), 97-107.
Audretsch, D.B., (2007), Entrepreneurship capital and economic growth. Oxford Review of Economic Policy, 23(1),
63-78.
Barlas, Y., (1996), Formal aspects of model validity and validation in system dynamics. System dynamics review, 12(3),
183-210.
Bogetic, Z., & Fedderke, J. W., (2006), International benchmarking of infrastructure performance in the Southern
African customs union countries. The World Bank.
Block, J., and Wagner, M., (2010), Necessity and opportunity entrepreneurs in Germany: Characteristics and earnings
differentials.
Chen, H., Gompers, P., Kovner, A., and Lerner, J., (2010), Buy local? The geography of venture capital. Journal of
Urban Economics, 67(1), 90-102.
Council for Scientific and Industrial Research (CSIR)., (2014), 10th State of Logistics Survey for South Africa 2013,
Value creation towards global competitiveness and sustainability, www.csir.co.za/sol/ [25 August 2018]
Davis, J.P., Eisenhardt, K.M., and Bingham, C.B., (2007), Developing theory through simulation methods. Academy of
Management Review. 32(2). pp. 480 - 499.
Debrezion, G., Pels, E., and Rietveld, P., (2011), The impact of rail transport on real estate prices: an empirical analysis
of the Dutch housing market. Urban Studies, 48(5), 997-1015.
DoT., (2017), Transport statistics bulletin 2014.Department of Transport, 109. www.transport.org [18 September 2018].
Esfahani, H.S., and Ramı́rez, M.T., (2003), Institutions, infrastructure, and economic growth. Journal of development
Economics, 70(2), 443-477.
Glaeser, E.L., Kerr, S.P., and Kerr, W.R., (2015), Entrepreneurship and urban growth: An empirical assessment with
historical mines. Review of Economics and Statistics, 97(2), 498-520.
Havenga, J., (2010), Logistics costs in South Africa–The case for macroeconomic measurement. South African Journal
of Economics, 78(4), 460-476.
Havenga, J. H., Simpson, Z. P., De Bod, A., & Viljoen, N. M., (2014), South Africa’s rising logistics costs: an uncertain
future. Journal of Transport and Supply Chain Management, 8(1), 1-7.
Ittmann, H. W., & King, D., (2010), State of Logistics–an overview of logistics in South Africa.
Jörn, B., and Sandner, P., (2009), “Necessity and opportunity entrepreneurs and their duration in self-employment:
evidence from German micro data.” Journal of Industry, Competition and Trade,9(2), 117-137.
Mair, J., and Marti, I., (2006), Social entrepreneurship research: A source of explanation, prediction, and delight. Journal
of world business, 41(1),36-44.
Maluleke, G.T., and Pretorius, L., (2016), Modelling the impact of mining on socio-economic infrastructure
development-a system dynamics approach. South African Journal of Industrial Engineering, 27(4), 66-76.
Negota, G. M., (2001), The impact of transport investment on infrastructure and economic development: the debate.
SATC 2001.
Olawale, F., & Garwe, D., (2010), Obstacles to the growth of new SMEs in South Africa: A principal component
analysis approach. African journal of Business management, 4(5), 729-738.
Peredo, A.M., and McLean, M., (2006), Social entrepreneurship: A critical review of the concept. Journal of world
business, 41(1), pp.56-65.
Prassa., (2015), Prassa Annual Report 2015/16, www.prasa.com/Annual/Report
Price Waterhouse Coopers (PwC), (2017), Africa Gearing Up, Future prospects in Africa for the
transportation & logistics industry. www.pwc.co.za/en/assets/ [22 August 2018]
Repenning, N.P., (2003), Selling system dynamics to (other) social scientists. System Dynamics Review, 19(4), 303 –
327.
Silverdore, (2018), Urban Public Transport in the 21st Century, UITP My Library, my.uitp.org/my library, 109. [10
November 2018].
Statssa., (2017), land Transport, Statistical release P7162, www.statssa.org, [10 August 2018].
Sterman, J.D., (1989), Modelling managerial behaviour: misperceptions of feedback in dynamic decision-making
experiment. Management science. Sloan school of management, Massachusetts Institute of Technology.
Massachusetts.
Sterman, J.D., (2010.), Does formal system dynamics training improve people’s understanding of accumulation? System
Dynamics Review, 26(4), pp.316-334.
UITP., (2017), Urban Public Transport in the 21st Century, UITP My Library, my.uitp.org/mylibrary, 109. [10 August
2018].
Vensim, (2018). www.vensim.com. [22 October 2018]
Venter, C., & Behrens, R., (2005), Transport expenditure: Is the 10% policy benchmark appropriate? In Proceedings of
the 24th Southern African Transport Conference (SATC 2005) (Vol. 11, p. 13).
Yoko Ishino
Yamaguchi University, Graduate School of Innovation
& Technology Management, Japan
E-mail: Ishino.y@yamaguchi-u.ac.jp
Hideyuki Aoki
Yamaguchi University, Graduate School of Innovation
& Technology Management, Japan
E-mail: hemy.aoki@384.jp
Ken Kaminishi
Yamaguchi University, Graduate School of Innovation
& Technology Management, Japan
E-mail: kaminisi@yamaguchi-u.ac.jp
Abstract
Japan’s e-commerce market is one of the largest and fastest growing in the world. There, it is said that elderly
people less use the Internet than younger people, when viewing the utilization rate by age groups. However,
the current Internet utilization rate of the elderly increased considerably compared with ten years ago. We
investigated the e-commerce behavior of the elderly in Japan, since aging has been a major issue in developed
countries including Japan in recent years. In this paper, we report the insight gained about trends of business-to-
consumer (B2C) e-commerce market for the elderly. In order to find characteristics of the B2C e-commerce sites
which the elderly visited more frequently than other age groups, we analyzed the web log data including one-year
behavioural records of over 200,000 panels in their 20’s to 60’s or older. After that, we identified the product
category that the elderly seemed to be notably interested in compared to other ages. Eventually, we revealed that
the elderly frequently visit several B2C e-commerce sites which sell so-called health foods. After examining
typical e-commerce websites of such health foods from the MOT perspective, we discovered that both the product
innovation and the process innovation would exist in developing health food products. Our contributions are that we
clarified what kinds of health food products should be targeted for elderly people in the B2C e-commerce. Aging
is a serious issue not limited to Japan, but a common issue in developed countries all over the world. Although
seniors consistently have lower rates of technology adoption than the general public, this group is more digitally
connected than ever. Investigating the e-commerce behavior of the elderly would be helpful to take the lead in an
aging society. Additionally, health food has attracted increasing attention for more than two decades and the health
food market share has continued to increase. Therefore, our findings should be very beneficial for people in not only
Japan but also other countries.
Keywords: Elderly People, B2C E-commerce, Health Food, Web Log Analysis, Innovation
1. Introduction
Japan’s e-commerce market is one of the largest and fastest growing in the world. The Ministry
of Economy, Trade and Industry reported that Japan’s business-to-consumer (B2C) e-commerce
market in 2017 was US$ 148.2 billion, with 9.1% annual growth. This occurred in the context
of a high 83.5% household penetration rate of the Internet. Japan is an Internet-driven society
where consumers “use diverse Internet retail shops and Internet auction sites, creating a variety
of purchasing channels available to them” (Takahashi et al., 2009). Japanese consumers can use
a variety of different retail channels (e.g., brick-and-mortar shops, mail orders, TV shopping, and
the Internet). Many consumers share their word-of-mouth reviews of the e-commerce experiences
through the platform websites.
In most countries including Japan, it has been said that senior people lag behind the younger
generations in the use of information technology (IT). This phenomenon has been called the “grey
divide” by various researchers (McMurtrey et al., 2008). However, the current Internet utilization
rate of the elderly increased considerably compared with 10 years ago in Japan. According to the
statistics of the Japanese Ministry of Internal Affairs and Communications, the use of online shopping
by elderly households has increased 2.9 times over the 10 years. The elderly’s EC site utilization rate
is now comparable to that of other age groups, although this is true in the case of personal computer
(PC), but not that of smartphone. This study focuses on the behavior of e-commerce by PCs of
elderly people in Japan, not smartphones.
Discovering consumers’ e-commerce behavior and the reasons that guide their buying process is
a very complex task (Kohavi, 2001). The user activities can be recorded in the web server logs
as a sequence of websites visited (Kohavi, 2001; Kosala et al., 2000). The very valuable users’
behavior is hidden in these logs, which must be discovered and analyzed (Facca et al., 2005). To
date, many studies have been reported using web server logs: for improving the website contents and
structure (Carmona et al., 2012), for personalizing contents (Song et al., 2006; Arbelaitz et al., 2013;
Gerrikagoitia et al., 2015), for recommending products (Cho et al., 2004; Kim et al., 2008), or for
understanding the interest of users in specific products (Su et al., 2015). Web server logs are often
called one of “big data.” So-called “big data” is not only characterised by extremely large volume,
but also by significance in its variety, velocity, veracity, variability and value (Gandomi et al., 2015;
Jin et al., 2015; Katal et al., 2013). Although web server logs we used were not unstructured data,
the original amount of them was more than hundreds of terabytes.
In this paper, we investigated the e-commerce behavior of the elderly in Japan, using web server logs.
Concretely, we analyzed the web log data in which the following fact had been recorded in order to
find characteristics of the B2C e-commerce sites which the elderly more frequently visited than other
age groups. The logs are the data where over 200,000 panels’ actions were recorded on a monthly basis
regarding many B2C e-commerce sites. Based on the data, we identified the product category that the
elderly seemed to be notably interested in, compared with other ages. By examining typical websites,
we finally obtained the insight about trends of B2C e-commerce market for the elderly. Aging has been
a major issue in many countries including Japan in recent years. Investigating the e-commerce behavior
of the elderly would be helpful to take the lead in an aging society.
2. Web Mining
“Web data mining” or “web mining” is an application of data mining techniques to discover
and extract information from web documents and services, such as the texts on the web page,
hyperlinks, and the web server logs. Web mining is widely used by companies or organizations
to find useful business information about consumers. Web mining is commonly categorized into
three types, namely, web content mining, web structure mining, and web usage mining (Kaur et al., 2017).
i. Web content mining (Kumar et al., 2017): This is used to investigate the information
gathered via web crawlers. The purpose is to explore the proper and relevant
information from the contents in the web documents, which consist of unstructured
documents (e.g. text, images, audio and video), semi-structured documents (e.g.
HTML documents), and structured documents (e.g. tables and lists).
ii. Web structure mining (Kumar et al., 2017): The purpose of this category is
to discover the model of link structure of web pages. This category focuses on
the document structure using data of hyperlinks which contain intra-document
hyperlinks and inter-document hyperlinks.
iii. Web usage mining (Ladekar et al., 2014): This is also called web log mining. The
purpose of this category is to study users’ web navigation behavior, that is, to discover
interesting usage patterns from the log records which are able to contain web server
logs, program logs, client profiles, bookmarks, mouse clicks and so forth.
This research is included in the category of web usage mining. Web usage mining is studied in many
fields such as marketing, accident-prevention program, web design, etc. The web usages, clearly,
represent one of the most important sources describing the user behavior and preferences. Web
usage mining takes advantage of server log files of computers. Server log file is a text file which
automatically created when a user requests a page from the web site, and which the web server
writes information in when a user requests a resource from the particular site. When a user sends a
query to the server, the requested database is retrieved and the user session data including the URL,
client’s IP address, access date and time, and so forth are recorded in the server log. Pre-processing
and mining the data in the log file is needed to obtain the insight about users’ behavior (Shrivastava
et al., 2012). Although log data resides at different places in computer system (Suneetha et al.,
2009), this research uses the web server log, which is stored in the web server.
4. Research Scheme
In this research, we mainly conduct web server log analysis and secondarily perform qualitative
analysis of websites favored by seniors. The methods and data used in this research are mentioned
below in sequence.
When ranking all the sites in descending order of the number of sessions acquired and then breaking
down the sessions of each site by age-group, out of the top 30 sites there were only four sites in
which the sessions of the age-group over the age of 60 account for more than 40% of all sessions.
Three sites out of these four were health food sales sites.
Then as shown in Figure 2, we examined the transition of the monthly session ratio of the age-
group over the age of 60 at the main health food sales sites, “Suntory Wellness,” “Nissui: Umi no
Genki,” “Kyowa Hakko Bio,” and “Euglena Online.” Figure 2 indicates that the session ratio of the
age-group over the age of 60 exceeds 40% at most major health food sales sites, while in the case of
“Amazon.co.jp” it stays around 22%. This means that the health food might be a category to which
the elderly are strongly attracted.
Figure 3 shows the actual number of monthly sessions derived from all panels at each site. According
to Figure 3, there are fluctuations in the number of sessions per month depending on the site.
However, it was found that there is not the particular seasonality.
Figure 4 indicates the monthly trend of the new user ratio at each website. From Figure 4, it was
found that the new user ratio is low on the sites ranging from the first place “Amazon.co.jp” to
the third place “Yahoo! Shopping,” while these sites keep many repeaters. On the other hand, the
fourth place “Suntory wellness” and the fifth place “Yodobashi.com” are about the same degree
(around 15%). Nevertheless, it turned out that there was a great difference in the average staying
time between these two sites, which is shown in Figure 5. The average staying time of “Suntory
Wellness” and “Yodobashi.com” was 60 seconds and 309 seconds, respectively. “Yodobashi.com”
is not a health food sales site but a home electronics sales site.
The average staying time at other health food sales sites, which is shown in Figure 5, is within
about 150 seconds. This time is very short in comparison with other sites on which other kinds of
products are mainly sold. Therefore, it is considered that health foods might be products that lead to
nomination buying. In other words, major health food sales sites are the place where elderly people
visit more frequently than the young and buy what they had decided to purchase in advance.
The product on which the maker, Suntory Wellness Ltd., has been putting the most emphasis
is “Sesamin EX.” Its product concept is as follows. “Sesamin EX” is a supplement made for
the body of people in their 40’s or over in which the power to maintain youthfulness is usually
decreasing. “Sesamin EX” contains four ingredients: sesamin, which is contained in a sesame seed
in a concentration of only less than 1%, Oryza Plus for adjusting physical condition, and natural
vitamin E and tocotrienol that are useful for beauty against aging. The synergy power of these four
substances leads you to youthful everyday life.
Sesamin is a kind of lignan (a plant-derived chemical substance) contained in sesame. It is said
that sesamin can be expected to have the following effects: lowering cholesterol, lowering blood
pressure, ameliorating lipid metabolism, promoting alcohol metabolism, regulating autonomic
nerve, improving fatigue feeling, etc.
Researchers in Suntory had studied for more than 30 years to elucidate the functions of
sesamin, and finally developed a technology to efficiently extract sesamin which is a rare
health ingredient contained in a concentration of only less than 1% in sesame seeds, so that
the technology was patented.
Suntory successfully achieved both product innovation and process innovation, which built a barrier
to entry against other companies. Based on these successes Suntory Wellness became a leading
company in the field of healthy foods. This success story might provide people, especially the
elderly, with a sense of trust in the company and products, and Suntory Wellness has kept higher
reputation and sales among health food sales firms.
7. Discussion
Health foods have attracted attention for over 20 years, so that the market of health foods has been
consistently expanding. However, there are few global studies on the statistical relationships between
the health food market and the economic or social situations. This is because it is difficult to compare
various countries’ markets at once, as the definitions and regulations about health food differ among
those countries. However, using statistical data of Asian countries, our previous research clarified
that the per-capita health food expenditure is able to be estimated with considerable accuracy by
using only the per-capita GDP and the rate of people aged 65 or older (Aoki et al., 2017). This is well
consistent with the results of this research that the elderly visit e-commerce sites of healthy foods
more frequently than the young.
On the other hand, not all health food sales sites can increase sales as the aging progresses. In order to
become an excellent online store that gathers much more users among many health food sales sites, an
organization should succeed in innovation of a product that meets the needs of users and concurrently
succeed in process innovation for reducing production costs. Success in both innovations leads the
organization to a position as an innovator in a market and also a popular B2C e-commerce shop.
8. Conclusion
By analyzing huge web log data including one-year behavioural records of over 200,000 panels,
we identified that the product category that the elderly are evidently interested in compared to other
ages is the health food. The analysis of average staying time at e-commerce sites revealed that the
elderly might buy health foods that they had decided to purchase in advance. Then, when examining
typical e-commerce websites of health foods, we discovered that both the product innovation and
the process innovation would be needed in developing health food products attractive for consumers.
Aging is a serious issue not limited to Japan, but a common issue in many countries all over the
world. The elderly have become more digitally connected than ever, with not smartphones but PCs.
Investigating the e-commerce behavior of the elderly would be helpful to take the lead in an aging
society. Additionally, health food has attracted increasing attention for more than two decades and
the health food market share has continued to increase. Therefore, our findings should be very
beneficial for people in not only Japan but also other countries.
IAMOT 2019 | 763
Managing Technology for Inclusive and Sustainable Growth
However, with web log data alone, we cannot accurately understand people’s consciousness and
the reason behind people’s behavior. Therefore, in the future, we plan to integrate analysis of a
questionnaire survey and analysis of the web log data. In addition, regarding the structure and
elements of B2C e-commerce site of health foods, we also plan to advance qualitative analysis on
cases other than Suntory Wellness.
9. Acknowledgements
This work was partly supported by JSPS KAKENHI Grant Number JP18K18654.
References
Aoki, H., and Ishino, Y., (2017), Essence of Growing Health Food Markets in Asian Countries, Journal on Innovation
and Sustainability, 8(3), 108-117.
Arbelaitz, O., Gurrutxaga, I., Lojo, A., Muguerza, J., Pérez, J. M., and Perona, I., (2013), Web usage and content mining
to extract knowledge for modelling the users of the bidasoa turismo website and to adapt it, Expert Systems
with Applications, 40(18), 7478-7491.
Carmona, C. J., Ramírez-Gallego, S., Torres, F., Bernal, E., del Jesus, M. J., and García, S., (2012), Web usage mining
to improve the design of an e-commerce website: OrOliveSur.com, Expert Systems with Applications: An
International Journal, 39(12), 11243-11249.
Cho, Y. H., and Kim, J. K., (2004), Application of Web usage mining and product taxonomy to collaborative
recommendations in e-commerce, Expert Systems with Applications: An International Journal, 26(2), 233-246.
Facca, F. M. and Lanzi, P. L., (2005), Mining interesting knowledge from Weblogs: A survey, Data & Knowledge
Engineering, 53(3), 225-241.
Gandomi, A., and Haider, M., (2015), Beyond the hype: big data concepts, methods, and analytics, International Journal
of Information Management, 35 (2), 137-144.
Gerrikagoitia, J. K., Castander, I., Rebön, F., and Alzua-Sorzabal, A., (2015), New trends of intelligent e-marketing
based on Web mining for e-shops, Procedia - Social and Behavioral Sciences, 175, 75-83.
Jin, X., Wah, B., Cheng, X., and Wang, Y., (2015), Significance and challenges of big data research, Big Data Research,
2 (2), 59-64.
Katal, A., Wazid, M., and Goudar, R.H., (2013), Big data: issues, challenges, tools and good practices, 2013 Sixth
International Conference on Contemporary Computing (IC3), 404-409.
Kaur, A., Maini, R., and Ahuja, A. S., (2017) Analysis of Web Usage Mining techniques to predict the user behavior from
Web Server Log Files, International Journal of Advanced Research in Computer Science, 8(5), 1127-1131.
Kim, K. J., Ahn, H., (2008), A recommender system using GA K-means clustering in an online shopping market, Expert
Systems with Applications: An International Journal, 34(2), 1200-1209.
Kohavi, R., (2001), Mining e-commerce data: The good the bad and the ugly, Proceedings of the Seventh ACM SIGKDD
International Conference on Knowledge Discovery and Data Mining, 8-13.
Kosala, R., and Blockeel, H., (2000), Web mining research: A survey, ACM SIGKDD Explorations Newsletter,
2(1), 1-15.
Kumar, A., Ahirwar, V., and Singh, R. K., (2017), A Study on Prediction of User Behavior Based on Web Server Log
Files in Web Usage Mining, International Journal of Engineering and Computer Science, 6(2), 20233-20236.
Ladekar, A., Raikar, D., and Pawar, P., (2014), Web Log Based Analysis of User’s Browsing Behavior, International
Journal of Advanced Research in Computer Engineering & Technology (IJARCET), 3(11), 3895-3899.
McMurtrey, M.E., McGaughey, R.E., and Downey, J.R., (2008), Seniors and Information Technology: Are We Shrinking
The Digital Divide?, Journal of International Technology and Information Management, 17(2), 121-136.
Shrivastava, A., and Shukla, N., (2012), Extracting Knowledge from User Access Logs, International Journal of
Scientific and Research Publications, 2(4).
Song, Q., and Shepperd, M., (2006), Mining Web browsing patterns for e-commerce, Computers in Industry, 57(7),
622-630.
Su, Q., and Chen, L., (2015), A method for discovering clusters of e-commerce interest patterns using click-stream data,
Electronic Commerce Research and Applications, 14(1), 1-13.
Suneetha, K. R., and Krishnamoorthi, R., (2009), Identifying User Behavior by Analyzing Web Server Access Log File,
International Journal of Computer Science and Network Security (IJCSNS), 9(4).
Takahashi, I., and Fluch, H., (2009), Retailing in Japan: Overview and key trends, European Retail Research, 23 (2),
145-162.
Abstract
Introduction and Purpose: Technological Catch up is a concept that plays a strategic role in economic growth of
countries, especially developing countries which focus on it to achieve higher economic positions. Governments
in these countries try to facilitate catching up trajectory through effective interventions. On the other hand,
regarding the more important role of one or several sectors in each country rather than other sectors, it is necessary
that strategic sectors be prioritized by policy makers. Iran, also as a developing country, is not an exception to
this rule. One of the sectors which has been having an important role in Iran’s economic development, and can be
considered as the engine of Iran’s economy, is its oil industry which has experienced many ups and downs since
its establishment. Therefore, the aim of this research is investigating catching up process in Iran’s oil industry and
government’s role in this process. For doing this, catching up process in this industry has been investigated based
on two prominent patterns of this field (i.e. Lee & Lim (2001) and Kim (1997)), and it has been scrutinized that
catching up process in the mentioned sector, corresponds most with which one of the stages of technological catch
up patterns studied in this paper.
Methodology: To do this research, first by using library method and surveying different existing resources such as
papers, books and related reports, technological progress in Iran’s oil industry and also government’s interventions
in this process has been investigated. For doing this, two catch up patterns (patters introduced by Lee & Lim (2001)
and Kim (1997)) were chosen. In the next step, open interviews with 5 experts of this field has been used as the data
gathering tool. This sample were chosen based on purposive method. By calculating the average number of expert’s
opinions about correspondence between current stage of catching up process in Iran’s oil sector and different stages
of chosen patterns, Iran’s oil sector’s catching up stage was determined. Accordingly, this is an applied research
with a qualitative method as the research strategy.
Findings: Findings of this research revealed that catching up process in Iran’s oil industry’s upstream corresponds
with first stage of Lee & Lim’s catch up pattern and also first stage of Kim’s pattern. On the other hand, catching up
process in the mentioned sector’ downstream, in some fields and technologies corresponds with first stage of Lee &
Lim’s pattern and for other fields and technologies is in transition from first stage to second stage, and based on Kim’s
patter, in some technologies is similar to the first stage, and in other technologies corresponds with the second one.
Contributions: Among the researches done so far, we couldn’t find any one investigating technological catch up
in Iran’s oil industry based on existing patterns, and therefore, considering two dominant patterns of technological
catch up for analyzing catching up process in this sector is one of the contributions of this research.
Keywords: Technological Catch up, Iran, Oil industry, government’s role
1. Introduction
The attempt to achieve further economic growth has always been one of the main concerns of the
countries. However, the sustainable and quick development is a modern phenomenon, emerging
after the industrial revolution in 18th century. Prior to that, there was a small gap between countries.
However, the industrial revolution accelerated growth in some western countries, whereas other
countries were left lagging behind. As a result, a huge divergence was created among income levels
of both developing and developed countries, as well as among developing countries with dynamic
growth and developing countries with low and medium income level (Chandra, Lin & Wang, 2012).
Nevertheless, all these countries have continued in their efforts towards development and growth.
For this purpose, advanced economies focus their efforts on R&D activities; whereas this is not the
IAMOT 2019 | 765
Managing Technology for Inclusive and Sustainable Growth
case with developing economies (Awate, Ajith, & Ajwani-Ramchandi, 2017). In order to reduce
their gap with developed economies, countries try to succeed in technological catch up with pioneers
through technology transfer (J.J. Lee & Yoon, 2005).
Governments, on the other hand, stimulate economic growth by accelerating development in
some specific industries having priority. These industries are referred to as key industries or
strategic industries (Yang, 1993). In fact, complex processes of technology development and
product commercialization are not viable without formulating appropriate government policies
(Pietuszkiewicz, 1999). The oil industry in Iran also is considered a significant industry and, since
its emergence, i.e., early twentieth century, it has remarkably formed the development trajectory
of Iran (Kareshenas & Malik, 2011). This sector, Along with gas sector, is considered as one of
the vital sectors for Iranian economic growth (Stevens, 2015); it is also an important sector in the
world and is considered as a major source of energy in world markets. This reveals the significance
of development in this industry. As a country with rich oil reserves, Iran also is among the major
oil suppliers in the world (Mirimoghadam & Ghazinoory, 2017). Thus, it is necessary to reinforce
the potentials for gas and oil related technology absorption and development in Iran (Hoshdar &
Fassihi, 2017).
Despite of its importance, however, it seems that little technological learning has happened in this
sector (Mirimoghadam & Ghazinoory, 2017), where there is gap between Iranian oil industry and
those of developed countries, as illustrated by their income gap. This research also was conducted
with the aim of investigating technological catch up in Iran’s oil industry, as well as to study the role
of government in this context. Thus, having elaborated the research method in section 2, we introduce
the concept of catch up in section 3, and after referring to some of its well-known patterns, two of
them receive more detailed exploration. In section 4, a history of Iran’s oil industry is introduced and
the developments occurred during its lifetime are investigated. In section 5, findings of the research
are discussed and finally in section 6, the readers are provided with conclusions.
2. Research Methodology
Research method is defined as a set of dynamic techniques for research performance. Researches are
divided into two categories in terms of the nature of study subject: Basic research and experimental
or applied research. Also, in terms of nature of information, they are divided into two categories:
qualitative and quantitative (Pandey & Pandey, 2015). This research is an applied one done with a
qualitative method.
Data gathering process was performed in two phases. First, by using library method and surveying
different existing resources such as papers, books, organizational reports and national documents,
the catch up literature was reviewed and two models of this field were studied. The history of oil
industry and the role of government in line with development of this sector were also studied in
different periods, aiming to identify, as much as possible, the technological developments as occurred
in Iranian oil industry and also governmental actions influencing it during the industry’s lifetime.
After this phase, using the interview method, experts’ opinions in this field were collected regarding
the technological catch up and developments in Iranian oil industry and the relevant government’s
role. They were also asked to give their opinions on correspondence between developments in this
industry and t existing steps in catching up patterns as considered in this research. To this end,
open interviews with 5 experts of this field were used as the data gathering tool. This sample was
chosen based on convenient sampling method, of which 1 expert was related to oil industry and 4
of them were considered as active members in both fields of policymaking and oil-related activities.
The results from this interview were counted based on the number of existing opinions about
correspondence between the catch up phase in Iranian oil industry and that of existing steps in given
patterns and then accordingly the catch up stage in which this sector is located was determined. In
the meantime, based on the information gained from interviews, the governmental actions affecting
this industry were also identified.
they did. The second pattern means that latecomers traverse almost the same route passed by
forerunners, but they skip some of the stages, and thus save time in this way. Finally, according to
the path-creation pattern, latecomer firms discover and follow their own technological development
path. This is usually the case when latecomers create their own path after they have been following
the path of forerunner for some time. The second and third patterns are referred to as two modes of
leapfrogging. Of course, these patterns can also happen in a combined way. These three patterns are
visible in Figure 1.
The research done by Lee & Lim (2001) is one of the first studies to show that latecomers’ catch-up
does not necessarily take place through traversing the path passed by advanced countries; rather,
they may achieve it without passing some stages, and in fact, by skipping them, or even by creating
their own path, which is different from the forerunners’’ trajectory, and thus succeed in catching up
with advanced countries (K. Lee et al., 2014).
Figure 1: Three Technological Catch-up Patterns Provided by Lee & Lim (2001)
Soleyman. A year after this (the discovery of oil), the concessions syndicate became the Anglo-
Iranian oil company (Dokhani, 2008).
This company can be mentioned as the main actor of this era in the oil industry (Tavakol &
Mehdizadeh, 2007), but with the nationalization of Iran’s oil industry in 1950, the company has
replaced itself with the National Iranian Oil Company. This happened when more than 90 percent
of the world’s oil production, refining and distribution activities, and 85 percent of the free world
tanker fleet capacity were at the disposal of eight international oil companies. These conditions made
it difficult to carry out oil operations, including exploitation and sale, independently and it took
about three years, from 1951 to 1954, to resolve the dispute with the Anglo-Iranian oil company.
With the coup d’état of 1953 and the collapse of the Mossadeq government, and as a result of
the new government, Iran’s oil policies also changed, and a new foreign consortium took over the
administration of this industry (Amirghodsi et al., 2015).
and Abadan, purchase of 5% shares of 700 gasoline sales locations of the US Shell Oil Company,
and an agreement to create a refinery with a capacity of 500 thousand barrels per day in the Persian
Gulf (Amirghodsi et al., 2015); (Tavakol & Mehdizadeh, 2007).
One of the major problems of this period was the dominance of commercial approach, which led attentions
to be focused on oil trade, not on its development and entrepreneurship. Therefore despite the fact that
several projects were carried out, development in the field of technological capabilities did not take place
and only the exploitation of oil reservoirs was put on the agenda of the authorities (Amirghodsi et al., 2015).
i. Has the Iranian oil industry traversed the catching-up process during its life cycle?
ii. Catching up trend in Iran’s oil industry corresponds more with which stages of
patterns introduced by Lee & Lim (2001) and Kim (1997)?
iii. What government policies and practices have influenced Iran’s oil industry and its
development process?
Attempts were made to select experts for the interview who were familiar with processes of the oil
industry and managerial and policy-making activities in this field. Table 1 contains information about
these experts. Table 2 also shows the summary of the information obtained through the interview.
Table 1: Information about the Experts Selected for the Interview
Experts Opinions
Catch-up and Development in Iran’s Oil Industry and Comparison With Catch-up Patterns
Government’s Actions
Lee & Lim (2001) Kim (1997)
Expert 1 In general, it should be said that oil industry in Iran has failed to In this regard, it According to the
catch up with advanced oil industries, but has experienced some should be said that we explanations, the
(field of developments in some sectors. To make it clear whether there are still at the path- Iranian oil industry
oil and has been a lot of developments or not, the level of analysis has following stage at the is at the copying and
policy- to be determined. If we consider Iran’s oil industry in terms of upstream of oil, and at imitation stage at the
making) two sectors, including upstream and downstream sectors, then this stage we still have upstream of oil, but
we can say that these developments in the downstream sector problems. We have at the downstream,
and about the E&P, EPC and OSC companies have taken place not yet succeeded to the situation is
well. We have made progresses in manufacturing components create the four basic somewhat different.
and equipment. But technological development at the upstream capabilities expressing Domestic companies
of oil is defined in the form of four capabilities, including project development at in the E&P, EPC,
management, financing, asset portfolios and risk management. In the upstream of oil and OSC sectors
the field of domestic human resource training, not much attention well, so we are at have succeeded in
has been paid to training them in these dimensions. Of course, the path-following developing some
various managers have greatly emphasized on training human stage, and we are technologies, so
resources and shown it in the context of the human resources faced with problems in general, it can
departments within organizations and firms. But for development, in this following. be said that at the
there is a need to develop the four capabilities in manpower. downstream, we are in
But there is a better the creative imitation
Over the years, the government has taken steps to develop this situation at the phase regrading some
industry, but these actions have not led to tangible results. The downstream of oil. A of the technologies
government’s approach has always been based on oil sales and large number of our and still in the
monetization of this industry. Since this industry has always domestic component- imitation and copying
been considered as the country’s revenue-generating industry manufacturing phase for some
and, on the other hand, it also meets the needs to provide companies have other technologies.
nationwide gas, it has never had the opportunity to work on developed some
improving its capabilities and catching up with forerunners. capabilities, but these
Meanwhile, despite the development of policy documents for developments have
technology transfer from the foreign party by the government, not been enough to
required long-term policies and plans for improvement of reach the path creating
this industry have not been organized in practice during these stage. In most sectors,
years, and most plans become less effective or ineffective we are at the path-
due to the change of governments. Of course, some policies following stage, and
have been developed, including policies to support domestic at the stage skipping
producers, which has been faced with operational constraints. in some sectors.
Expert 2 Iran’s oil industry is far from the leading and world class According to this According to the
industries, and therefore is at the stage of trying to reduce its pattern, it can be said Kim’s pattern, it can
(field of gap with them but has not yet succeeded in catching up. In that in general and be said that in the
oil and recent years, many companies have been established in the altogether we are at upstream we are at the
policy- fields of exploration, excavation, production of components and the path-following duplicative imitation
making) equipment, and the provision of services, which have achieved stage at the upstream stage and, in the case
some developments in some of the technologies, but in many and downstream. of some downstream
cases of technologies, we are still dependent on the foreign party. technologies, we have
entered the creative
It cannot be said that we have achieved catch-up, and that imitation phase (but
the government has not taken any appropriate action in this not to the extent that
regard. Supporting domestic producers and grounding for their according to the Lee
development have not been well done and the progress has not and Lim’s model it
been in a way to strengthen domestic companies to meet the can be considered
needs of oil technologies enough. The change of government as equivalent to
in the multi-year intervals that in Iran is in a way that changes stage skipping);
the structures completely has hindered the development of this and in the case of
industry. But besides these, the progresses made cannot be other technologies,
denied, which are often in the field of hard technologies and the it is more consistent
production of some components. The ability to perform repairing with the first stage,
and maintenance activities has been created partly and in the imitation and copying.
case of some technologies inside, but there is still dependency
on the foreign party regarding some other technologies.
Expert 3 Component-manufacturing companies have had some advances Overall, in the case The dominant mode
in some components and technologies, but the knowledge of of most technologies, seems to be the
(field of upstream technologies is exclusively available to advanced and we are in the path- imitation and copying
oil) especial companies and has not been transported to Iran. Iran following stage stage, although
has taken steps in the field of hardware, and some companies and, in the case of attempts have been
such as Fateh Sanat Kimia, MAPNA and some other companies some others, we made for creative
in different areas are working on hardware and manufacturing are approaching the imitation concerning
equipment and components. In the field of chemicals, we have stage of innovation or few technologies.
also acquired some technologies from China. Investments have stage-skipping.
also been made in the field of the establishment of knowledge-
based companies active in this field and several domestic
producers have upgraded their capabilities so that they can
now build and repair some equipment. But in spite of all these
improvements, there has not been much success in total, and we
can say that there has not been much learning or progress in areas
such as high-tech technologies, systems and instrumentation.
Expert 4 Oil industry should be considered in terms of two sectors According to this
of upstream and downstream. In the downstream sector, pattern, it can be said
(field of some technological developments have taken place, which, that in a large number
oil and of course, are not in the category of technological catch-up, of technologies in the
policy- but can somehow be considered as progressing and moving downstream part, we
making) forward. This has many reasons. One of the reasons is that are in the duplicative
idea-to-product cycle for upstream oil technologies is about 16 imitation phase, but
years, and since the government in Iran changes every 4 years, we are also in the
and in the longest circumstance, it changes every 8 years, and creative imitation
after these changes, numerous consequent changes take place phase for some of
in most layers and sectors, so there is not enough time to fit them. In addition, for
certain policies and achieve a desirable outcome, and most of a more limited number
policies are abandoned in halfway. We are not at an advanced of technologies, we
level in terms of manpower and financial capability. There are are now somewhere
some good advances in the component-manufacturing sector, between stages 2 and
but there are problems in the basic design sector. We do not 3 and are trying to
have the ability of domestic design. There is no standard in the achieve innovation
field of upstream technologies, and no attempt has been made through research
to compile standards. Another reason for the problems of the and development
Iranian oil industry is the lack of international interactions. activities. We are in
Language, political, social and environmental problems have the copying stage
also made it worse. Project management is one of the most at the upstream.
important issues at the upstream level of oil. Unfortunately,
despite the efforts made, there is still a great gap between us
and industry leaders at the international level in this regard.
In the field of government policies and measures for technological
development in the oil industry, we can mention the law
prohibiting the purchase of foreign goods with similar domestic
production. However, this law is not actually implemented
in practice, and in other words, the purchase of foreign goods
which have domestic similar ones is carried still out in some
ways. There are also paragraphs related to technology transfer
in the field of oil contracts, but the details of this transfer are
unclear. There are a number of manufacturers and a number of
research centres in the country, and government has made good
investments in the field of this industry’s researches, but there are
no technology developers. In addition, government, by exerting
the policy of applying scholarships to employ top students of the
10 top universities in the country, has caused elites of engineering
and technical disciplines to be placed in managerial positions.
Expert 5 Iran’s oil industry is a very complicated industry. This industry At the upstream of oil, At the upstream of
has its own culture, which has dominated the entire industry. it can be said that the oil, it can be said that
(field of Given the multiplicity of sectors and technologies involved current trend is more the developments
oil and in this industry, one cannot give a general answer to its catch- consistent with the are somewhere
policy- up. For example, in the field of gas turbines, this industry has path-following stage, between the stages of
making) succeeded to catch up well and have successful experiences. although actions done duplicative imitation
in some areas and and creative imitation.
The government of Iran, in other words, sovereignty did not technologies have led At the downstream
accept the risk of using new technologies in the oil industry to reaching the stage- sector of oil, some
(whereas, e.g., it accepted the risk in the electric power industry skipping phase. This innovations have been
and led to the development of MAPNA), and this caused trend also exists at achieved in some
the difficulty for catch-up of this industry. Of course, at the the downstream, but areas, so in those
downstream of oil, there is less technological risk. Most of the the difference is that cases we can say that
technologies at the downstream are transferred using licensing, at the downstream, we are in the creative
and domestic companies can perform reverse engineering of them. the developments are duplication phase, and
The government has tried to focus on technology transfer with the closer to the stage- even trying to reach
policy of developing more complete contracts, but the details and skipping phase than the innovation stage
steps needed for complete transfer have not been properly considered at the upstream. (of course, about some
operationally. It has also tried to help research and development limited technologies),
of this sector by establishing research centres. But generally, but in the case of
successive changes of governments and their entire subcategories some other areas and
will lead to ineffectiveness of long-term plans in the industry. technologies, we are
at the duplicative
imitation stage.
According to the results (Table 1), four experts in their responses suggested Iran’s oil industry to
be considered at two upstream and downstream levels, and they believed to answer the question of
occurrence or non-occurrence of catch-up in Iran’s oil industry or to determine its amount, these
two levels should be separated. Experts’ opinions indicate that all of them agree that according to
the technological catch-up pattern of Lee & Lim, Iran’s oil industry at the upstream level is at the
first stage. Of course, expert 2 expressed his opinion in general and regardless of its level, and in
general has recognized the development stage of this sector at upstream and downstream to be in
the first phase of the Lee & Lim’s pattern, and in some areas transiting from stage 1 to stage 2, i.e.
stage-skipping. Concerning the downstream of oil industry, expert 1 believed that advancements in
some areas and technologies are consistent with the stage-skipping phase of Lee & Lim’s pattern,
and the path-following stage is true about other areas and technologies. Expert 2 has identified the
developments and improvements made in the downstream sector to be equivalent to the path-following
stage, whereas the other three experts believed that the development of this sector has been as such that
in some technologies and fields in which more advancements have gained, the downstream sector is
located somewhere between the first and second stages of the Lee & Lim’s catch-up pattern, and in the
case of other technologies it is located at the first stage, i.e. path following stage.
Experts’ opinions about comparison of developments in Iran’s oil industry with Kim’s pattern,
are dividable on downstream and upstream levels. Opinions of three experts are similar to each
other indicating consistency of upstream sector developments with the first stage of Kim’s pattern,
i.e. duplicative imitation. Opinion of expert 2 is that regardless of different levels, developments
of this industry has been in a way that in some areas, it is located at the second stage of Kim’s
pattern, i.e. creative imitation and at the first stage about other technologies. One of the experts,
means Expert 5, has identified the advancements at this level of analysis (upstream level) to
be somewhere between the first and second stages. Regarding the downstream sector, all of the
experts believed that about some technologies, the advancements are consistent with the second
stage of Kim’s pattern (creative imitation) and about some other technologies they are consistent
with its first stage (duplicative imitation). Also, two of them identified developments of this
sector to be somewhere between the second and third stages (as mentioned before, third stage
is innovation). Table 3 shows the results of comparison between development stage of Iran’s oil
industry with the aforementioned catch-up patterns schematically. Tables 4 and 5 show the results
in this regard based on frequency of the answers.
Table 3: Results Obtained through Interview about Catch-up in Iranian Oil Industry
Upstream
1
Downstream
Upstream
2
Downstream
3 Total
Upstream
4
Downstream
Upstream
5
Downstream
Given that the experts interviewed were 5, therefore, the criterion to confirm the consistency of
developments in Iran’s oil industry with each stage of the mentioned pattern is the presence of
consensus among at least 3 of them. This is also true about the results listed in Table 5.
According to results shown in Table 4, it can be said that the result of experts’ opinions is that Iranian
oil industry in the upstream area is at the first stage of technological catch-up pattern of Lee & Lim
(2001), i.e. path-following stage. The developments in Iran’s oil industry in the downstream sector
have been in a way that for some technologies it is at the first stage, i.e. path-following stage; and
about some other technologies, it is in transition from first stage to second stage, i.e. stage-skipping.
Table 5: Frequency and Result of the Answers about Catch-up in Iran’s
Oil Industry Based on Kim’s Catch-up Pattern (1997)
Table 5 shows that if the basis of evaluation is on Kim’s technological catch-up pattern (1997), then
Iran’s oil industry in the upstream sector is at the first stage of this pattern, i.e., duplicative imitation
stage and in the downstream sector about some technologies is at the first stage and about some
technologies at the creative imitation stage.
Besides that, the experts have mentioned some governmental policies and roles affecting this
industry which are inserted in table 6.
Table 6: Effective Governmental Measures on Iranian Oil Industry
Policy of monetization from the oil sector and inattention to its technological development (-)
Lack of long-term plans for the development of this industry (-)
Low effectiveness or ineffectiveness of plans and policies over time due to successive
Expert 1
changes of governments (-)
The policy of supporting domestic producers (which, of course, has been carried out limitedly
in practice) (+)
The findings indicate that the Iran’s oil industry generally has technological gap with forerunners
and has thus not succeeded in catching up with them, but at the same time, in the downstream sector,
it has achieved more technological developments than in the upstream sector, and is on the catching
up stage and reducing its technological gap with forerunners. Efforts have been made in this regard,
and about some technologies (although limitedly) it is approaching advanced oil companies. But at
the upstream of oil, Iran is still in the position of a follower.
The government of Iran also contributes to these conditions. Some government policies and measures
have had a positive effect on the development of the industry, and on the contrary, some others have
prevented developments in this industry. Some policies and measures that have a positive effect
on development and catching up of the oil industry include efforts to establish research institutes
and investment in the field of research to contribute to research and development activities in the
oil industry, approval of laws, including the law prohibiting the purchase of foreign goods having
similar domestic production, in order to support domestic producers, and efforts to develop contracts
supporting technology transfer, which could be seen in the formulation of technology attachment for
contracts with a higher rate than the amount determined by the government.
But, on the other hand, not considering precise steps to completely transfer technology into the
country has caused government’s policy and approach for technology transfer to have incomplete
results in practice. Government’s monetarizing view on the oil industry over various periods have
been hampering profound development of this industry. Changing this view and investing in a number
of other industries in which national capabilities exist can be fruitful in removing this disadvantage.
The successive change of governments and subsequent restructures in the related organizations
cause long-term plans in this industry to either not be implemented, or if they are implemented,
they will be abandoned in halfway. Limitation of international interactions as a result of sanctions
imposed by the United States and some other countries is another factor that has been an obstacle
to further developments and catching up of Iran’s oil industry. Also, lack of policies for compiling
technological standards related to this industry and fostering technology developers has made the
efforts to develop some technologies ineffective in practice. In addition, one of the important points
in the oil industry is paying attention to capability development in project management’s field,
especially in the upstream sector. Despite the fact that many efforts have been made to develop
skilled manpower in the country, government has not developed effective policies to upgrade this
capability. Government’s efforts to address these barriers can facilitate and accelerate process of
catching up in Iran’s oil industry.
4. Conclusion
In this research, it was attempted to investigate the process of technological catching up in Iran’s
oil industry as one of the key industries in this country’s economy. For this purpose, after reviewing
the history of this industry during different eras, by interviewing the experts, the consistency of the
developments in the industry with the various stages of the two patterns in this area, namely Lee
& Lim (2001) and Kim (1997), was evaluated. The results of the research indicated that Iran’s oil
industry at the upstream, according to Lee & Lim’s pattern, is at the path-following stage and at
the duplicative imitation stage according to Kim’s. The downstream development was also such
that according to Lee & Lim’s model about some technologies it is at the path-following stage and
about other technologies it is transiting from this stage to the second stage, i.e. stage skipping. Also,
according to the Kim’s pattern, in some of technologies, it is at the duplicative imitation stage, and
about other ones, it is at the creative imitation stage. It was also attempted to mention government
policies affecting the industry as much as possible.
Inevitably, this research has been confronted with limitations. One of them was that Iran’s oil
industry was studied in general and in the form of two upstream and downstream levels, and studies
on more detailed and micro levels, including firms and many active companies locating in this sector
were not conducted. In addition, due to lack of access to some of the more detailed information,
including texts of the contracts and some of oil documents, the study was confined to the general
information obtained from the experts’ opinions. On the other hand, because of existing limitations,
among various types of existing catch-up patterns, two of the most important ones were considered
in this study and evaluation of other patterns and models was neglected. As the fourth limitation,
excluding indicators for measurement of catch-up in the industry, according to Lee & Lim (2001)
and Kim (1997), should be mentioned. Including such indicators in future researches can increase t
richness of the results. In addition, consideration of other catch-up models and patterns can also be
taken into account in future researches. Also, attempts to access oil texts and documents and using
them for broader analyses on the catch-up and development of capabilities in this industry is one
of the options ahead for future researches. In addition, breaking down the level of analysis into the
more detailed levels forming Iran’s oil industry and even evaluating companies active in this area
individually can be considered for deepening explorations of this industry further.
References
Amirghodsi, Sirous, Maleki, Ali, Bonyadi Naeeni, Ali (2015). Study of the technological development process in
Iran’s oil industry and its comparison with Norway, the 5th International Conference and the 9th National
Conference on Technology Management, in persian.
Tavakol, Mehdizadeh (2007). Study of technology development and oil industry in Iran, 1908-1978: A View from
technology sociology perspective, Social Sciences Letter, No. 31, pp. 21-56, in persian.
Dokhani, Vahid (2008). History of Upstream Activities of the Iran’s Oil Industry in the Last Century (1908-2008),
Exploration and Production; Specialized Technical Journal of National Oil Company of Iran, No. 50, pp.
6-8, in persian.
Nowruzi, Mohammad (2015). The challenge of echnology transfer in upstream oil contracts with an emphasis on Iran’s
buyback contracts, Quarterly of Energy Policy-Making and Energy Planning Research, First Year, No. 1,
pp. 185-220, in persian.
Abbaszadeh, P., Maleki, A., Alipour, M., & Maman, Y. K. (2013). Iran’s oil development scenarios by 2025. Energy
policy, 56, 612-622.
Abramovitz, M. (1986). Catching up, forging ahead, and falling behind. The Journal of Economic History, 46(2), 385-406.
Ahmadvand, E., Salami, S. R., Soofi, J. B., & Tabatabaeian, S. H. (2018). Catch-up process in nanotechnology start-ups:
The case of an Iranian electrospinning firm. Technology in Society.
Awate, S., Ajith, V., & Ajwani-Ramchandani, R. (2017). Catch-up as a Survival Strategy in the Solar Power Industry.
Journal of International Management.
Barder, O. M. (2006). A policymakers’ guide to Dutch disease.
Chandra, V., Lin, J. Y., & Wang, Y. (2012). Leading dragons phenomenon: New opportunities for catch-up in low-
income countries: The World Bank.
Chekouri, S. M., Chibi, A., & Benbouziane, M. (2017). Algeria and the natural resource curse: oil abundance and
economic growth. Middle East Development Journal, 9(2), 233-255.
Fagerberg, J., & Godinho, M. M. (2004). Innovation and catching-up.
Giachetti, C., & Marchi, G. (2017). Successive changes in leadership in the worldwide mobile phone industry: The role
of windows of opportunity and firms’ competitive action. Research policy, 46(2), 352-364.
Hoshdar, F., & Fassihi, S. F. (2017). Technology Development in Iranian Petroleum Industry: Approaches, Achievements,
and Challenges The Development of Science and Technology in Iran (pp. 87-110): Springer.
Kim, J.-Y., Park, T.-Y., & Lee, K. (2013). Catch-up by indigenous firms in the software industry and the role of
the government in China: A sectoral system of innovation (SSI) perspective. Eurasian Business Review,
3(1), 100-120.
Kim, L. (2001). The dynamics of technological learning in industrialisation. International Social Science Journal,
53(168), 297-308.
Larsen, E. R. (2006). Escaping the resource curse and the Dutch disease? When and why Norway caught up with and
forged ahead of its neighbors. American Journal of Economics and Sociology, 65(3), 605-640.
Lee, J. J., & Yoon, H. (2015). A comparative study of technological learning and organizational capability development
in complex products systems: Distinctive paths of three latecomers in military aircraft industry. Research
policy, 44(7), 1296-1313.
Lee, K., Park, T. Y., & Krishnan, R. T. (2014). Catching‐up or leapfrogging in the Indian IT service sector: Windows
of opportunity, Path‐creating, and moving up the value chain. Development Policy Review, 32(4), 495-518.
Malerba, F., & Nelson, R. (2011). Learning and catching up in different sectoral systems: evidence from six industries.
Industrial and Corporate Change, 20(6), 1645-1675.
Mazzoleni, R., & Nelson, R. R. (2007). Public research institutions and economic catch-up. Research policy, 36(10),
1512-1528.
Mirimoghadam, M., & Ghazinoory, S. (2017). An institutional analysis of technological learning in Iran’s oil and gas
industry: Case study of south pars gas field development. Technological Forecasting and Social Change.
Pietruszkiewicz, J. (1999). What are the Appropriate Roles for Government in Technology Deployment? : NREL.
Shin, J.-S. (2017). Dynamic catch-up strategy, capability expansion and changing windows of opportunity in the
memory industry. Research policy, 46(2), 404-416.
Stevens, P. (2015). Prospects for Iran’s Oil and Gas Sector: Chatham House for the Royal Institute of International Affairs.
Yang, Y.-H. (1993). Government policy and strategic industries: the case of Taiwan Trade and Protectionism, NBER-
EASE Volume 2 (pp. 387-411): University of Chicago Press.
Yap, X.-S., & Truffer, B. (2018). Shaping selection environments for industrial catch-up and sustainability transitions:
A systemic perspective on endogenizing windows of opportunity. Research policy.
Kazuo Hatakeyama
Enterprise Consulting Office/ Salvador, Bahia, Brazil,
E-mail: khatakeyama875@gmail.com
Abstract
Charcoal will remain important in the lives of billions of people around the world, as well as in the efforts towards
finding energy sources that are capable of meeting energy demands while having the lowest environmental impact,
greater economic returns and better appreciation of work. The national production process of charcoal still remains
performed in the handcraft manner and spread among thousands producers in the masonry kilns of small capacity
and basic technology without recovering the carbonization gases. The production of this type of kilns represents
more than 70% of the charcoal production process in Brazil. The reference on producer of small scale relates to
the use of kilns of small production capacity. These types of kilns presents low gravimetric yield obtaining
approximately ¼ of conversion of woods in charcoal. The question is towards new approach to produce charcoal
using alternative methods with incorporation of advanced technology. This research proposes an environmental
and economic model of charcoal production and, to achieve that, it has mapped the productive processes of three
technological production routes, employing reforestation wood, in three different production units located in three
distinct Brazilian states in the southern region. Analyses of environmental and economic value conducted in the
process of charcoal production in cylindrical kilns with direct release of the combustion gases generated during
carbonization to the atmosphere (Process 1); in the process with combustion of the gases in furnaces (Process 2);
and in the process with condensation of the gases (Process 3). In the analysis of environmental value, employing
the Life Cycle Assessment (LCA) methodology, found that Process 1 was highly impactful in 94% of the impact
categories assessed. In comparison with Process 1, regarding damages to human health, Process 2 presented
significant impact reductions in the categories of human toxicity (42 pp), and photochemical oxidant formation
(61 pp). Regarding damages to the ecosystem reductions found in the categories of terrestrial ecotoxicity (67 pp),
drinking water ecotoxicity (47 pp), and marine ecotoxicity (53 pp). Concerning damages to resources, Process 2
contributed with a reduction in metal depletion (10 pp) and fossil depletion (10 pp). Process 3 presented impact
reductions in all of the categories in comparison with Process 1 and, in the category of formation of particulate
matter presented itself as the best process among the three with a reduction of (14 pp) in relation to Process 1 and
a significant reduction (45 pp) in comparison with Process 2. The analysis of economic value highlights that the
economic viability of charcoal production in low technology and low investment processes has been increasingly
more dependent on the reduction of operational costs and, therefore, on the efficiency of the operation. The
suggestions of the model bring contributions to the operational efficiency and environmental performance.
Keywords: Charcoal Production; Wood Carbonization; Sustainable Process; Life Cycle Assessment
1. Introduction
Charcoal will remain important in the lives of billions of people around the world, as well as in the
efforts towards finding energy sources that are capable of meeting energy demands while having
the lowest environmental impact, greater economic returns and better appreciation of work. The
national production process of charcoal still remains performed in the handcraft manner and spread
among thousands producers in the masonry kilns of small capacity and basic technology without
recovering the carbonization gases. The production of this type of kilns represents more than 70% of
the charcoal production process in Brazil. The reference on producer of small scale relates to the use
of kilns of small production capacity. These types of kilns presents low gravimetric yield obtaining
Pereira et al. (2017), in the literature review, regarding to the state of the art of the technologies used
to burn gases of carbonization, mention studies that prove the reduction in the emissions of carbon
monoxide (CO), and methane (CH4), as manner of mitigation of the GEE and improvement of the
work conditions in the production unities.
Another technology route able to reduce the amount of emissions of carbon monoxide is by the
condensation of the gases of the pyrolysis. Considering the gravimetric yield in charcoal (GYC) of
33%, this condensable portion is the pyroligneous liquor that represents 42% of the balance of mass
of the process composed by 35.5% of pyroligneous acid and 6.5% of insoluble tar (Gomes; Oliveira,
1980), depending on final temperature.
Authors as Chiamenti et al., (2016) in recent studies regarding the use of the pyroligneous acid, also
known as pyroligneous extract, reveals antibacterial action in coliforms. Schnitzer et al., (2015) the
influence in the developments of plants as the orchids. Sander et al. (2014) the use as electrolyte in
the anodization of titanium. Almeida (2012) as the preservative agent of cosmetics and sanitizing,
and Silva et al., (2012) as substitute of the chromium in anti-corrosive treatments in aluminum
alloys.
Regarding economic aspect, the handcraft model, low cost and simple construction has been the
main reason of its prevalence, even the low productivity. The dissemination of the industrial models
with more advanced technologies run into high investment required and in the lack of technological
consolidation that have unfeasible its implantation even for bigger producers.
The way to check the production of charcoal being conducted in the sustainable manner, in the
environmental evaluation of its impact over the climate change (FAO, 2017), as seen in the study by
Santos et al., (2017). On economic analysis of feasibility of the activity and on social the evaluation
of the work environment.
The data of technological processes utilized as scenery were data ecoinvent. For the consumption of
clay utilized in the muddling and enclosure of the ovens utilized the dataset: “Clay {GLO}| market
for | AllocDef, U”. To the wood, the dataset utilized: “Roundwood {GLO}| harvest, secondary forest
| AllocDef, U”. The data of the productive processes obtained by means of experiments.
The charcoal considered as the main flow, and all impact allocated to it. The allocation is necessary
in the process of carbonization, because besides of charcoal also are produced the fines. Normally,
the large pieces are commercially valued and the fines are disregarded (Kammen and Lew, 2005).
The fines have potential for use as energetic input as stated by Pereira et al., (2017) and Rousset et
al., (2011) contribute the reduction of the emissions of GEE (FAO, 2017). However, this research
analyzed the worst of the scenarios (all impact allocated in charcoal), that particularly harms the
Process 3, since the allocation does not divided with the pyroligneous liquor.
The method of evaluation of impact of the lifecycle, performed analysis about which method
contemplated the categories of impact: climate changes, particulate material, depletion of the ozone
layer, photochemical oxidation, acidification, eutrophication and water consumption. Besides these,
were included: fossil energy, abiotic resource and the land used, in view of that usually evaluated
when compare sources fossil energy with renewable energy, although this study have not realized
this comparison. Identified that the ReCiPe Endpoint contemplated all these categories of impact.
Was considered the version (H/A) V.1.12 and the calculations performed with the aid of the software
SimaPro 8.2.3.0.
For the inventory of the lifecycle (ILC) utilized the data of the technologies and processes utilized,
as well as the region and the period of execution of the experiments. None of all data of emissions
obtained in laboratory, having been necessary to perform calculations. Thus, the chemical
composition of different substances estimated according the percentiles presented in the Table 1.
Table 1: Carbonization products: per ton of wood as a dry weight %, Source:
Adapted from Alves, 2003; Ferreira, 2000; Gomes and Oliveira, 1980
(Methanol) (2.00)
Total 100.00
Table 1 identify products of the carbonization, separated in parts, being 33% of charcoal (solid),
42% of condensable part (liquid) and 25% of non-condensable part (gaseous).
However, other compositions can found in other authors, depending of the wood utilized and of
variables of the reactions, such as: rate of heating, temperature, time of residence of gases and the
type of atmosphere of the kiln (oxidant, reductive or neutral), according Alves (2003). The phenolic
compounds of the tars identified and calculated according Alves (2003). The data found considered
as Process Line of Base for the calculation of the emissions of the three Processes evaluated.
For the validation of data was elaborated the balance of mass and energy. The elaboration of the
balances relied on the technical data of the three Processes and with the data from the studies of
Alves (2003), Gomes and Oliveira (1980), Ferreira (2000), and Soares et al., (2014).
Taking as the base line the studies of Gomes and Oliveira (1980) and Ferreira (2000), developed
the balances of mass and energy of the Processes 1, 2 and 3. For effect of calculation of the masses
utilized, for each Process, ratio between the total gas of each Process mapped and the total of gas of
the Process of base, denominated relation gas-gas.
This way, were obtained the three multiplicative factors that made possible the transference of data
of the line base to the data of the field experiments in the Processes 1, 2 and 3, by the Equation 1.
Total mass of gas of the process mapped (kg)
Total mass of gas total of the process base (kg)
(1)
where:
Total mass of gas of the process mapped = Mass of the wood in dried base (WooddB) – (Mass of the
Charcoalproduced + Mass of the Hoopsgenerated + Mass of the Finesgenerated)
Total mass of gas of the process base = Mass of the condensable gases (CG) + Mass of the non-
condensable gases (NCG).
Equation 1 portrays the assumption that the carbon content in the wood goes by to the charcoal or to
the gases and, therefore, does not pops up in CF present in the gases. Therefore, in the relation to the
Equation 1, the volume of gases is directly proportional to the mass of batch charged and inversely
proportional to the CF and RGCV.
Additionally to the Process Line of Base (see Table 2), the masses of NO2 and SO2 estimated as
realized in Soares et al., (2014). The percentiles were 0.03% to N and, 0.27% for S, generating 1.0
kg of NO2 and 5.4 kg of SO2 for the Process Line of Base. The values referring of nitrogen dioxide
(NO2) and sulfur dioxide (SO2) they obtained considering the transformation these oxides due of
the difference between the sulfur and the nitrogen present in the wood with six years old and in the
charcoal obtained. The values of N (0.205%) and S (0.325%) for the wood and N (0.170%) and S
(0.030%) for the charcoal, obtained by Soares et al., (2014), were calculated by the average of its
values in woods of five to seven years old.
In the Process 2, with the burn of gases, the balance of mass had alterations. Assumed that all gases
reduced in proportion of the reduction of the CH4 (66.5%), any less for the CO (70%) and for H2
(100%).
Regarding to the emissions of particulate material (PM), one those most shocking to the human
health (respiratory tract), the estimation calculated taking as base the concept of Lora (2002) that
consider any substance in atmosphere, in the liquid or solid form, except fresh water, with dimensions
superiors to molecules and of origin primary or secondary. The particulates of secondary origin
that formed by the chemical reactions (gaseous phase) in the atmosphere generating condensable
compounds. Were evaluated the particles classified as fines, with diameter dp < 2.5 µ. Among
previous studies appointed, the validation of data specified only by Ekeh, Fangmeier and Müller
(2014).
The criteria for the analysis of the quality of the data utilized in this research based in the Matrix
Pedigree of Weidema and Wesnaes (1996) shown in the Table 2.
Table 2: Analysis of the Quality of the Data via Matrix Pedigree, Source:
Based in Weidema and Wesnaes (1996)
Information obtained
Information
Criteria
desired
Process 1 Process 2 Process 3
If considered the
condensation of
gases, data with
If considered the representative
combustion of the gases, known and
the data represent some localized. If
The data represent
Completeness 100% of the cases locals. If considered without considered
70% of the sector
combustion of the gases, the without
data represent around 70% condensation of
of the sector. gases, the data
represent around
70% of the
sector.
Thermocouples type K
to measure temperatures;
copper tubes to collect gases
in the duct of conduction
and in the chimney; Cylindrical tubes
Weighing machine gas board 9030 Wuhan and reader of
Collect of data
to weigh of wood CUBIC Optoeletronics Co. temperature in
and method to
Consistency and products. Ltd, filters of precision - the interior of
calculation of the
System without FIT1 e FIT2; gas board the kiln; tubes of
emissions
instrumentation. 3100 Wuhan CUBIC PVC for cooling
Optoeletronics Co. Ltd. for gases.
collecting procedures and
reading of the percentile
composition volume base
of gases.
4. Field Survey
The productive flow mapped for technical visits to unities of charcoal production (UCP) located in
the states of Parana, Minas Gerais and Rio Grande do Sul. Minas Gerais being the largest Brazilian
producer and consumer of charcoal, also housing institutions and academics researches of reference,
notably in the development of research in combustion of gases of the carbonization of the wood.
Parana by the significant number of small producers of charcoal for domestic consumption. Rio
Grande do Sul for housing the biggest community of producers that practice the carbonization of
wood with condensation of gases. The technical visits in field performed during the period covered
between years 2013 and 2017.
The mapping of the productive flow without the use of gases (Process 1) performed in the UCP in
the region of the Campos Gerais in the State of Parana. The property had 200 ha, in which, 169 ha
occupied with planted forest of eucalyptus of the species Dunnii Maiden (70%) and Saligna (30%).
The charcoal delivered for packing to sale in retail market for domestic use.
Technical visits to the laboratory of panels and energy of the wood of the Federal University of
Vicosa – LAPEM/UFV, in the State of Minas Gerais, during October and November 2015, made
possible the attendance and collection of the data for mapping the productive flow with burn of gases
in (Process 2). The experiments carried out by the researchers of the Institution, in prototype of the
system kiln-furnace. Results of the carbonization shared the study of Donato (2017).
To map the productive flow with condensation of gases (Process 3), two visits occurred in the months
of December 2015 and May 2016. Visited three UCPs located, each one, in small properties of rural
agricultures that grow grains, fruits and vegetables; rise poultry and pigs in consortium system with
big enterprises and produce charcoal with collection of the pyroligneous liquor, for consumption
or sale. The installations of the UCP allow that the owner decide to produce the charcoal with
condensation of gases or not.
The proprieties are located in the region of the Cai Valley, in the State of Rio Grande do Sul. The
production and collection system of the pyroligneous liquor made in the Brochier’s System. This
denomination, according Gomes and Encarnacao (2012) is the allusion to the main producer city
of charcoal of the region, whose production is destined to the packing market for the domestic
consumption. The carbonizations performed in March 2017.
5. RESULTS
Fines - - - 20 60 30 - - -
Liquor - - - - - 110 - - -
Condensable gases
Tars
In the Table 3, the values of output to atmosphere in the Process 1 refer all gaseous or solid materials
in suspension from the carbonization of the wood. The values of output to the atmosphere of the
Process 2 refer those that did not burn during the combustion in the furnace and in the Process 3
those that did not condensed. The values obtained, after processed in the software, generated results
of the ELC of charcoal by process evaluated, using as unity of analysis 1 kg of charcoal.
The first confirmation is that the Process 1 was the most shocking in 16 off 17 categories analyzed.
Decided, therefore, take the Process 1 as the base process for the effect of comparisons with the
Processes 2 and 3. Analyzing the contributions of the Process 2, in comparison to the Process 1,
noticed the reduction of impact in all categories (except particulate material).
Regarding the categories of impact related to the damage to human health, categories 1 to 6, the
Process 2 presented significant reductions of shock in the categories human toxicity (42 pp),
formation of photochemical oxidant (61 pp), besides the reduction in the categories of depletion
of ozone and ionizing radiation (10 pp) and, climate changes (11 pp). In the case of the particulate
material in the Process 2 became in this category the equivalent to 100% of impact.
Analyzing the contributions of the Process 2 regarding the categories of impact related to the
damages to the ecosystem (categories 7 to 15), significant reductions of impact were noticed in the
categories terrestrial ecotoxicity (67 pp), ecotoxicity of fresh water (47 pp) and marine ecotoxicity
(53 pp). Other categories presented some reduction of impact, varying between, as in the terrestrial
acidification (5 pp) and climate changes ecosystem (13 pp).
Regarding categories of impact related to the damages to the resources (categories 16 and 17), the
Process 2 contributed with the reduction in the depletion of metal (10 pp) and fossil depletion (10
pp). The Process 3 presented reductions of impact in all categories compared with the Process 1 and
in the category formation of particulate de material presented as best of the three with reduction of
(14 pp) about to the Process 1, if compared with the Process 2 the reduction was more significant
(45 pp).
Analyzing the contributions of the Process 3 about the categories of impact related to the damages
to the ecosystem (categories 7 to 15), were noticed reductions of impact varying between terrestrial
acidification (16 pp) and terrestrial ecotoxicity (26 pp).
Regarding categories of impact related to the damages to the resources (categories 16 and 17), the
Process 3 contributed with reduction in the depletion of metal (16 pp) and fossil depletion (16 pp).
In the case of the Process 2, more significant results could be expected, if reductions noticed of the
CO (66.5%) and CH4 (70.0%) during the combustion of gases in the furnace, were larger. Reductions
Have been found more reductions by Lana (2014), with 86.2% to the CO and 88.0% to the CH4; by
Coelho (2013) with 74.1% to the CO and 99.8% to the CH4 and by Cardoso et al., (2010) with 93.8%
to the CO and 96.9% to the CH4, in similar systems. The minor reduction of these emissions could
attributed to the dimensioning of the furnace (Donato, 2017). Santos et al. (2017) compared the life
cycle of the process of carbonization with the burn of gases in different technologies and state that
to consider it in the frontiers C2G, notice that the environmental impacts have the main dependence
over the efficiency of each type of technological process of production of the charcoal.
In the case of the Process 3, significant result expected, if the condenser was more efficient, in the
experiment, the result showed that 12% of the total of condensable gases available were effectively
condensed, represents 4.7% of RG in pyroligneous liquor. Froehlich (2011) performed two
experiments of condensation of the specie Acacia Mearnsii of Wild (black acacia): the experiment
of laboratory resulted in 38% of RG in condensed liquid and, the field experiment, in similar system
to this research, resulted in approximately 6.5% of RG, showing that has opportunity of important
improvements in the condenser.
However, present the contribution of the processes of carbonization and of the use of wood within
the total impacts proceedings of the activity.
The process of carbonization in the Process 1 contributes significantly for the following categories
of impacts:
(a) Regarding potential damages to human health, formed by categories: human toxicity
(55%), formation of the photochemical oxidants (94%) and formation of particulate
material (100%);
(b) Regarding to the damages to quality of the ecosystem in the categories of impacts
terrestrial acidification (95%), terrestrial ecotoxicity (98%), fresh water ecotoxicity
(63%) and marine ecotoxicity (75%);
Regarding to the consumption of wood, the Process 1 consumed 9% more than the Process 2 and
13% less than the Process 3 by the tone of charcoal produced. The results show:
(a) potential damages to human health in the categories climate changes (94%), depletion of
the ozone (100%), human toxicity (45%) and ionizing radiation (100%);
(b) contribution to the damages of quality of the ecosystem in the categories of impacts
climate changes (94%), eutrophication of fresh water (100%), fresh water ecotoxicity
(37%), marine ecotoxicity (25%), occupation of agriculture lands, occupation of urban
lands and natural transformation of the earth (100% each);
(c) that the potential environmental impact in the category of damages to the resources was
100% for the categories depletion of the metal and depletion fossil.
Contributions of the Process 2 shows that the carbonization of the process significantly in the
categories of impacts:
(a) Regarding potential damage to the human health, formed by the categories human
toxicity (31%), formation of the photochemical oxidants (87%) and formation of
particulate material(100%);
(b) Regarding the damage to the quality of the Ecosystem in the categories of impacts
terrestrial acidification (95%), terrestrial ecotoxicity (95%), fresh water ecotoxicity
(38%) and marine ecotoxicity (52%);
Regarding the utilization of the wood, the Process 2 consumed 9% less that the Process 1 and 21%
less that the Process 3 for each ton of charcoal produced. Results show:
(a) potential damage to the human health in the categories climate changes (98%), depletion
of the ozone (100%), human toxicity (69%) and ionizing radiation (100%);
(b) contribution for the damage of the quality of the Ecosystem in the categories of impacts
climate changes (98%), fresh water eutrophication (100%), fresh water ecotoxicity
(62%), marine ecotoxicity (48%), occupation of the agriculture land, occupation of the
urban land and natural transformation of the earth (100% each);
(c) that the potential environmental impact in the category of damages to the resources was
100% for the categories depletion of the metal and fossil depletion.
The contributions of the Process 3, presented in the Figure 3, shows that the process of carbonization
of the Process 3 shocks significantly in the categories impacts:
(a) Regarding potential damages to the human health, formed by the categories human
toxicity (52%), formation of the photochemical oxidants (94%) and formation of
particulate material (100%);
(b) Regarding the damages to the quality of Ecosystem in the categories of impacts terrestrial
acidification (95%), terrestrial ecotoxicity (98%), fresh water ecotoxicity (60%) and
marine ecotoxicity (73%);
Regarding the wood consumption, the Process 3 consumed 16% more than the Process 1 and 27%
more than the Process 2 per ton of charcoal produced. Results show:
(a) potential harm to the human health in the categories climate changes (94%), depletion of
the ozone (100%), human toxicity (48%) and ionizing radiation (100%);
(b) contribution for the damages to the quality of the Ecosystem in the categories of impacts
climate changes (94%), eutrophication of fresh water (100%), fresh water ecotoxicity
(40%), marine ecotoxicity (27%), occupation of agriculture land, occupation of urban
land and natural transformation of the earth (100% each);
(c) that the potential environmental impact in the category of damages to the resources was
100% to the categories depletion of the metal and fossil depletion.
Technical-operational data
Operational costs
40. Average monthly cost estimated of maintenance of kilns 400.00 820.91 1,582.53
B) Inputs
Revenues of Sales
Fines 0 0 0
Pyroligneous liquor 0 0 13
D) Outputs
Profitability (%) 35 29 -5
With the sale price of the charcoal for the domestic market, of the region of the State of Parana and
the cost of the wood practiced in the region, adopted in the premises, the analysis of the Table 7
indicates economic feasibility in the Processes 1 and 2, with predominance of the Process 1 in all
indicators.
The predominance of the Process 1 over the Process 2, in economic terms, can be explained by the
fact the former have not been optimized as to operational expenses, since some data were adapted
from the Process 1 to allow the comparison among them.
Other explanation of the better economic performance of the Process 1 related that the fact of
that the Processes 2 and 3 have kilns of smaller volumetric capacity, requiring more number of
carbonizations, among other factors.
Factors such as the low density, high content of humidity and the low volume of wood loaded, lead
to low performance of the Process 3, showing the economic unviability, when compared with the
Processes 1 and 2.
In an analysis of sensitivity, considering the variable the sale price and all more constant, that the
Processes 1, 2 and 3 be economically feasible the sale price per ton of charcoal not be lower than $
572.50; $ 624.50 and $ 882.20, respectively.
Considering all as the constant, less the price of wood, to that the Processes 1, 2 and 3 are economically
viable, the maximum price to stereo acquisition of the wood ought to be $ 70.20; $ 63.80 and $ 31.30,
respectively. Thus, in need of the price of sale 17.6% bigger and of the price of purchase of the wood
30.4% smaller than the values adopted as the basis in the analysis, the unviability explained.
The study of Dallastra (2010) compared technologies based in metallic kilns and in masonry kilns
of the type rectangular and cylindrical. The author emphasized that, in the view point of the return
of investment, the lower the investment, bigger the percentile of return (rudimentary technology)
and that the margin of net profit is directly proportional to the efficiency of the process (advanced
technology). Further stated that the cylindrical kiln technology of the “hot ass” type presented the
bigger return over the capital invested, however presented more sensibility to the variations in the
prices of the wood and the charcoal.
Silva and Farias (2015) analyzed the economic viability of the production of charcoal in three
cylindrical masonry kilns of the “hot ass” type. Considered kilns with and without chimney and kiln
of the Brochier’s system with condensation of gases; own wood from consortium plantation of black
acacia with corn and wood acquired from contractors. Authors found bigger attractiveness in the
production by the Brochier’s system justified by using own wood and by the income obtained with
the sale of the pyroligneous liquor.
Oliveira et al., (2017) analyzed the viability and the economic risk of kiln-furnace system and oven
“hot ass”. They found that the system kiln-furnace presented bigger economic viability, explain
mainly, by getting bigger RGCV and that the probability of the system be economically inviable was
0.9% while that for the kiln “hot ass” this probability was 27.3%.
The sustainability of the process based in the guarantee of the permanence of the activity according:
i. The capacity of the no commitment of the natural resources by the utilization of
renewable origin and that the handling be adequate in order to do not attack the
environment;
ii. The capacity of to enable the greater use of the available resources by means
technologies and the best practices of fabrication;
iii. The guarantee that the human being will be respected in its elementary needs, both
those involved in the activity, as well as those around it;
iv. The respect to the environment by not emitting pollutants and the compliance with
relevant legislation; and,
v. The economic viability of the activity in the generation of enough gains for the
maintenance of the activity and without aggression to the environment.
7. Conclusion
The analysis of economic value highlights that the economic viability in low technology and low
investment processes has been increasingly more dependent on the reduction of operational costs
and, therefore, on the efficiency of the operation. The suggestions of the model bring contributions
to the operational efficiency and environmental performance.
8. Acknowledgements
This work had the financial support of coordination of improvement of higher education personnel
(CAPES) to which dully acknowledge. Many thanks to the academic and technical staff of the
graduate program in production engineering of the UTFPR. Thanks also to charcoal producers of
several regions and research institutes for the valuable contribution to the completion of present
research work.
References
Almeida, R. S. R. (2012) Potential of the pyroligneous extract of eucalyptus wood as the cosmetics and sanitizing
preservative agents. 110 p. Doctoral Thesis – Forest Resources Program, Escola Superior de Agricultura
Luiz de Queiroz. Piracicaba.
Alves, C. R. (2003) Utilization of fractions of tar in the synthesis of phenolic resins for partial substitute of phenol and
formaldehyde. Doctoral Thesis – Forest Science, Federal University of Parana. Curitiba.
Bailis, R. et al., (2013) Innovation in charcoal production: a comparative life cycle assessment of two kiln technologies
in Brazil. Energy for Sustainable Development, Special Issue on Charcoal. v. 17, n. 2, p. 189–200, Apr.
Brito, J. O. (1990) Principles of production and utilization of charcoal of wood. Documentos Florestais, ESALQ. USP/–
Piracicaba (9): 1-19, May.
Campos, M. G. (2012) Approach of the life cycle in the evaluation of environmental impacts in the primary processing
offshore. Graduation Project/Environmental Engineering Course, Polytechnic School, Federal University of
Rio de Janeiro - Rio de Janeiro.
Chiamenti, L. et al., (2016) Antibacterial action of the pyroligneous liquor over coliforms. Revista Conhecimento
Online, v. 2, n. 0, p. 47–54, 31 Dec.
Dallastra, E. C. (2010) Production systems of charcoal in Brazil: analysis of economic viability. Master’s Dissertation -
Agroenergia, Escola de Economia de Sao Paulo da Fundacao Getulio Vargas. Sao Paulo.
De Miranda, R. C., Bailis, R. and Vilela, A. de O. (2013) Cogenerating electricity from charcoaling: a promising new
advanced technology. Energy for Sustainable Development, Special Issue on Charcoal. v. 17, n. 2, p. 171–
176, Apr.
Donato, D. B. (2017) Development and evaluation of performance of the furnace for the combustion of the gases of the
carbonization of wood. Doctoral Thesis – Forest Science, Federal University of Vicosa. Vicosa.
Ekeh, O., Fangmeier, A. and Müller, J. (2014) Quantifying greenhouse gases from the production, transportation and
utilization of charcoal in developing countries: a case study of Kampala, Uganda. The International Journal
of Life Cycle Assessment, v. 19, n. 9, p. 1643-1652, 10 Jun.
EPE. (2017) National energy balance 2017: year-base 2016. Rio de Janeiro: Brazilian Enterprise of Energy. Retrieved in:
<file:///C:/Users/Asus/Downloads/70a324edde3b1bc50494f8a5d810059e.pdf>. Access in: Apr. 14, 2017.
FAO, (2017) The charcoal transition: greening the charcoal value chain to mitigate climate change and improve local
livelihoods. J. van Dam. Retrieved in: <http://www.fao.org/3/a-i6935e.pdf>. Access in: Apr. 14, 2017.
Ferreira, O. C. (2000) The future of charcoal in the metallurgy: emission of gases of greenhouse effect in the production
and consumption of charcoal. Revista Economia & Energia, v. 4.
Froehlich, P. L. (2011) Study of the processes of production of charcoal in the Vale do Rio dos Sinos. Master’s
Dissertation - Tecnologia de Materiais e Processos Industriais, Universidade Feevale. Novo Hamburgo.
Gomes, G. F. and Encarnacao, F. (2012) The environmental impact on air quality and exposure to carbon monoxide from
charcoal production in southern Brazil. Environmental Research, v. 116, p. 136–139, Jul.
Gomes, P. A. and Oliveira, J. B. de (1980) Teory of the carbonization of the wood. CETEC: Serie Publicacoes Tecnicas
1. In: Use of the wood for energy, compiled Waldir Resende Penedo. 1v. 158p.
IBA - (2017) Annual report - base year 2016[s.l.] Brazilian Industry of Woods.
Kammen, D. M. and Lew, D. J. (2005) Review of technologies for the production and use of charcoal. Berkeley, CA,
USA: University of California.
Khoo, H. H., Tan, R. B. H. and Sagisaka, M. (2008) Utilization of woody biomass in Singapore: technological options
for carbonization and economic comparison with incineration. The International Journal of Life Cycle
Assessment, v. 13, n. 4, p. 312, 1 Jun.
Lora, E. E. S. (2002) Prevention and control of the pollution in energy, industry and transportation sectors. 2a. ed. [s.l.]
Editora Interciencia.
Oliveira, A. C. et al., (2017) Analysis of economic risk of two production systems of charcoal. Forest and Environment,
v. 24.
Pereira, E. G. et al., (2016) Pyrolysis gases burners: sustainability for integrated production of charcoal, heat and
electricity. Renewable and Sustainable Energy Reviews.
Piekarski, C. M. et al., (2017) Life cycle assessment of medium-density fiberboard (MDF) manufacturing process in
Brazil. Science of the Total Environment, v. 575, p. 103– 111, 1 Jan.
Pimenta, A. S. et al., (2006) Evaluation of profile of workers and ergonomics conditions in production of charcoal
activity in set of surface kilns of the type “hot-ass”. Revista Arvore, v. 30, n. 5.
Rousset, P. et al., (2011) LCA of eucalyptus wood charcoal briquettes. Journal of Cleaner Production, v. 19, n. 14, p.
1647–1653, Sep.
Sander, D. C. et al., (2014) Anodization of titanium in gross pyroligneous liquor and distilled. In: XX Salao de Iniciacao
Cientifica e Tecnologica. Canoas, RS. Retrieved in:
<http://www.conferencias.ulbra.br/index.php/sic/xx/paper/view/2446>
Santos, S. F. O. M.; Hatakeyama, K. (2012) Sustainable charcoal production process focusing the environmental,
economical, social and cultural aspects. Production, v. 22, n. 2, p. 309–321, Apr.
Santos, S. F. O. M. et al., (2017) Life cycle analysis of charcoal production in masonry kilns with and without
carbonization process generated gas combustion. Sustainability, v. 9, n. 9, p. 1558, 1 Sep.
Schnitzer, J. A. et al., (2015) Pyroligneous extract doses in orchids culture. Ceres Magazine, v. 62, n. 1, p. 101–106, Feb.
Silva, F. C. L. da and Farias, J. A. de (2015) Economic analysis of the production of Acacia mearnsii De Wild and
charcoal in the Vale do Cai and Taquari, Rio Grande do Sul. Rural Science, v. 45, n. 5, p. 927–932, 1 May.
Silva, E. F. C. D. et al., (2012) Electrochemical behavior of the aluminum alloys 2024-t3 coated with condensed smoke.
Annals. Salao Internacional de Ensino, Pesquisa e Extensao, v. 4, n. 2.
Soares, V.C., Bianchi, M.L., Trugilho, P.F., Pereira, A.J. and Höfler, J. (2014) Correlations between the properties
of wood and charcoal of hybrid of eucalyptus. Rev. Arvore. Retrieved in online: http://www. redalyc.org/
articulo.oa?id=48831728017 (accessed on September, 2nd, 2016).
Vilela, A. de O. et al., (2014) A new technology for the combined production of charcoal and electricity through
cogeneration. Biomass and Bioenergy, v. 69, p. 222–240, Oct.
Vital, M. H. F. and Pinto, M. A. C. (2009) Conditions for the sustainability of the production of charcoal for the
fabrication of the pig iron in Brazil. BNDES – National Bank for Economic and Social Development, Sep.
2009. Retrieved in: <https://web.bndes.net/bib/jspui/handle/1408/1661>
Weidema, B. P. and Wesnæs, M. S. (1996) Data quality management for life cycle inventories—an example of using
data quality indicators. Journal of Cleaner Production, v. 4, n. 3, p. 167–174, 1 Jan.
Chelma Sliep
University of Johannesburg, Department of Applied
Information Systems, South Africa
E-mail: chelmap@uj.ac.za
Carl Marnewick
University of Johannesburg, Department of Applied
Information Systems, South Africa
E-mail: cmarnewick@uj.ac.za
Abstract
Information technology (IT) leaders in HEIs face a challenge to incorporate and provision for the continuous
transformation of technology and the way it is applied in HEIs to improve the quality of IT service delivery to
satisfy their stakeholders’ expectations. It is inevitable that managing IT has become much more than just managing
of IT systems with a fixed set of knowledge and skills. Simply implementing new technologies and innovations
does not necessarily give an organisation the competitive edge, and technology does not have a significant influence
when it comes to improving business processes. Various best practices, methodologies, standards and frameworks
exist today which all address some feature of the IT value stream. Organisations, achieving stability and agility,
recognise, agree, change and effortlessly integrate more than one framework. IT, although not the core business of
an organisation, is an important part of the organisation and IT should dynamically change its philosophy, standards
and its way of thinking to meet the rapidly changing, everyday organisational necessities. In recent years, IT is
managed as a value stream and not as a localised domain and should be looked at through the lean and systems
thinking viewpoint to identify any obstacles and interruptions as these are the cause of limitations in the value
stream. A multi-dimensional framework is designed for the integration of continuous transformation of technology
and its application in HEIs to improve the quality of service delivery to satisfy their stakeholders’ expectations.
The framework provides strategies to minimise complexity through recognition, standardisation, automation and
optimisation of the IT value stream. The framework aims to use existing documented processes and standards to
rapidly advance management processes and flow. The benefits of this article include contribution to the body of
knowledge of quality service delivery and IT leaders can use the framework to apply lean and agile principles to
overcome the silo approach and keep up with the perseverance to deliver quality IT services to enable them to
become high performance organisations.
Keywords: IT Service Quality, ITIL, ITSM, Lean IT, DevOps, Services and Operations
1. Introduction
Higher Education Institutions (HEIs) are under enormous pressure as employee and student
expectations increase. Added to this pressure is the rapid changes of technology and
globalisation which affects the demands from jobs that do not exist yet and this constantly
increases the costs (Casares, J. et al., 2013, Goldstein,, 2006, Shark, 2015). IT leaders within
HEIs face the challenge to incorporate and provision for this ongoing change in technology
and find the right places and times to deploy or not to deploy these technologies in order to
provide quality services to various stakeholders. To be able to provide one single solution or
approach to address the variety of IT service requirements across the various types of HEIs is
a scary thought (Chester, 2010). As teaching in person becomes less significant, there will be a
larger expectation to increase the quality of education with less resources to do so (Goldstein,
2006). It is technology that will allow the system to reorganise and deliver what the world
needs (Koester, 2011, Shark, 2015). HEIs IT leaders are under growing pressure to add value
to the core of education and research processes to guarantee competitive advantage (Gartner,
2015). It is critical to make the right decisions regarding IT investments as it has a substantial
effect on economic prospects, which in turn could have significant detrimental consequences
on an organisation’s performance (Adomavicius et al., 2008). HEIs must understand technology
and the extend of technology change to determine their competitive advantage. IT services
and systems management are vital in support and satisfaction of business needs (Cronholm,
et al., 2014). IT is far more strategic and universal as IT offers unbelievable prospects and
requests unanticipated answers, which integrate into numerous business requirements and is
vital to the core university purposes of teaching and learning (Koester, 2011). IT within HEI’s
is multifunctional as it assists the business of the institution, provide new developments and
innovations to teaching and learning, and safeguards new capabilities to research (Andriola,
et al., 2015). The IT requirements from HEIs stakeholders need to be well-defined and well
understood to deliver reliable accessible and well-designed IT services (Koester, 2011). Severe
and strong-minded changes in people, process and technology are needed if the complete
benefits of technology implementations want to be met (Lowendahl, 2015). IT requires tools
to successfully enable leadership collaboration and a shared goal to drive change and will not
be able to produce a perfect fit solution for education on its own. The key to sustainable IT
solutions lies in the use of active and reputable processes and methodologies which offers
important strengths and agility as required by HEIs and this caused the development of multiple
best practice frameworks providing several landscapes of the value chain driven by IT (De
Waal, 2012, Fiampolis, et al., 2016). IT, as an essential part of the institution, determines
organisational stability and agility through the adoption of various best practice frameworks.
A conceptual framework, which takes into consideration the key value-added components is
proposed for quality IT service delivery. The multi-dimensional framework integrates DevOps and
LEAN IT principles and VisibleOps processes to ensure all aspects of delivering quality IT services
are considered.
This article is organised into three sections: the first section provides an overview of frameworks and
models used in the industry to improve and manage quality IT services. The conceptual framework
for ensuring continued IT service delivery is proposed in the second section. The third section
concludes the article.
2. Literature Review
The literature review investigates the concept of service quality as this is ultimately what IT
departments or IT organisations want to achieve even though various stakeholders have various
expectations on when the service fulfilled their expectations. ITIL, DevOps, Lean IT and VisibleOps
are industry known frameworks which were explored in the literature review and the integration of
key components of these frameworks were identified, and resulted in the proposed multi-dimensional
conceptual framework.
It is not a good that can be tasted, touched, Customer requesting a new user at the helpdesk, but not
Intangible
seen or heard receiving a physical good.
Perishable/ A ticket booked for a specific show cannot be used for a
As a service is created, it is being used.
Consumable different show.
One customer can be assisted over the phone to solve a
Services are offered on different levels to
Heterogeneous problem whilst another customer will need a technician’ s
fit different customers
personal assistance solving the same problem.
Consume the service at the same time it Customer connects to the internet while paying for the data
Inseparable
is procured at the same time.
The features of a service make it challenging to measure service quality (Fiampolis, et al., 2016,
Prasad, et al., 2013). Grönroos, (1984) and Zeithmal, et al., (1985), agrees that service quality is
normally defined as the extent of the difference between the customer’s expectations and their
perceptions. According to Grönroos, (2007), the gap between the customer expectations and
perceptions should be kept to a minimum and the end goal is to satisfy the customer to establish
a long-term relationship (Prasad, et al., 2013). Usually researchers find it difficult to define and
measure good quality services and in general good quality services are delivered when customers
seem satisfied, profitability increase, customers keep on coming back and when customers give
positive feedback (Wienberg, 2001). Therefore, delivering quality services depend on a combination
of product reliability, a quality setting, delivery of reliable systems, excellent personal service
(including employee attitude, knowledge and skills) and the measurement should permit valuation
before and after changes in the process and implement defined standards for service delivery
(Johnston, 1995, Zeithaml, et al., 1985). Various frameworks like ITIL, ITSM, DevOps, Lean and
Agile are available to assist IT organisations in delivering quality IT services.
2.3. Lean IT
Lean started in the manufacturing industry where the Toyota Production System optimised the
production line with methodologies with an end goal to reduce waste and optimise workflow (Sedge,
2014). Forms of waste may include incorrect services being delivered, waiting time and ‘busywork’
(Reinertsen, 2009). The focus of a lean organisation is to enhance customer value, decrease waste
and optimise operations (University of California, 2013). Sayer, et al., (2007) describe Lean as
“a philosophy and a proven long-term approach that aligns everything in the business to deliver
increasing customer value”. Therefore, the main objective is to enable people and systems to
provide a non-stop flow of important services to the customer, but at the same time decrease excess
and scarcities in a complete process to ensure continuous performance enhancement (Sayer, et al.,
2007, Sedge, 2014). DuMoulin (2015), supports this viewpoint and defines Lean as “a strategy for
operational excellence based on clearly defined values to engage people in continuously improving
safety, morale, quality, cost and productivity”. Modig et al., (2015) describes Lean Thinking as an
equilibrium between the requirement of flow efficiency (delivery of customer value) and resource
efficiency (use of people’s time and other resources)”.
The key principles of Lean can be applied to various industries, even IT and has been applied to software
development where the main emphasis is to deliver a solution anywhere, anytime and as soon as possible
(Akins, 2016). The Lean IT Association (LITA) expands on the definition of Lean to apply it to IT and
defines Lean IT as “the extension of lean manufacturing and lean services principles to the development
and management of information technology products and services. Its goal is to continuously improve
the value delivered by IT organisations to their customers and the professionalism of IT people” (Lean IT
Association, 2015). Lean IT mainly emphasise on how value is created for customers through application
of systems thinking through creating consistent perseverance, accepting methodological thinking,
producing flow and push, assuring quality, being modest and respect each person (Kim, et al., 2016).
According to Modig et al., (2015) an organisation’s “flow efficiency” is determined by processes and
therefore it is critical to understand the organisation’s processes before Lean principles can be applied. The
following Lean principles can be applied to IT: eliminate waste, enhance learning and create knowledge,
be committed to each process and task, include quality throughout the build process, include integrity,
deliver as quickly as possible, respect and trust people (Akins, 2016).
DevOps is made possible by culture, automation, Lean, measurement and sharing (CALMS model
of DevOps) and all work together to produce quicker and improved quality releases (Atos., 2014).
The CALMS model is depicted in Table 2.
Table 2: CALMS Model of DevOps
Components Description
Culture Forms the foundation of any development team
Automation Automation of processes and eliminate manual tasks to focus on quality outputs. It is the “enabler” of
continuous delivery
Lean Lean reduces waste and focus on the goal, people and processes
Measurement To be able to improve it, you need to measure it. Measure everything it can as frequently as possible to
successfully apply DevOps
Sharing To break down silos, you need to share, collaborate and sharing forms part of the feedback loop
Organisations are looking for more agile ways to deal with IT complications and research shows
that there is a large adoption of DevOps, 6% in 2014 and 66% in 2015, but it is also forecast that
90% of organisations adopting DevOps will fail if they do not commit to a culture change (Diana,
2015, RightScale, 2015). It is important to note that the culture of communication and collaboration
is critical to structure efficient DevOps teams and processes (Kim, et al., 2016).
iii. The most relevant frameworks were identified to form the foundation of the
conceptual framework.
The interactive mechanisms of the conceptual framework are discussed in the following sections.
Figure 1: Visible Ops and relevant ITIL processes (adjusted Behr et al., 2016)
achieve the business goals. A pursuit of perfection encourages the transfer from reactive behaviour
to pro-active identification and problem solving.
Behaviour: This principle focuses on an operational level and permits employees to take personal
responsibility for their initiatives. This results in initiatives that add value to customers and produces
quality work. This behaviour becomes part of the employee’s daily work routine and creates self-
worth and pride within employees.
Perspective: On a tactical level, perspective is about awareness and talks to three viewpoints in the
Lean enterprise. Firstly, the voice of the customer speaks awareness of the customer’s requirements.
This enables the employees to know what to focus on if they understand the requirements. Secondly,
no product should get delivered to the customer if it is not 100% correct and quality of source
guarantees that everything gets done right from the beginning. Thirdly, an overview of all the joined
processes that concludes the value stream are ensured through systems thinking.
Flow: The flow principle ensures that whatever service, product or information that could possibly
cause disruptions, be removed. Service outages must be kept to the minimum.
Capstone: On a strategic level of the Lean enterprise the focus is on culture. Culture implies the
organisation’s shared principles, opinions and morals. The capstone of the Lean IT culture pursues
continuous improvement and includes the enablement of employees to pro-actively add value to and
solve problems with high performance being the end goal (Senn, 2015).
and comply with the proposed culture whilst the focus between the development and operation
teams must be improved collaboration (Wurster, et al., 2013). The outcomes as described by Kim
(2014) are as follow:
i. Time should be scheduled each day to review and improve work done for the day
ii. Formalize procedures to reward teams for taking risks
iii. Build accountabilities into the system to enable flexibility.
The team should be accountable from the product concept until end-of-life. This greatly enhances the
level of responsibility felt and the quality of the services or products developed. Continuous improvement
requires teams to continuously adapt to the changing environments for example legislation changes
and customer needs and as new technology becomes available, a focus to continuously improve the
products or services offered while reducing waste and cost and optimise speed is key.
In addition to the DevOps principles, it is important to engage in the seven habits of DevOps if
significant improvements are wanted to be seen (DeMartine, et al., 2014).
The Seven Habits of DevOps applied to the entire IT department
i. Establish trust between developers and operations: Continuous communication and
collaboration between various IT divisions are important to understand each other’s
worlds. This will improve interrelationships and build trust between colleagues.
ii. See everything through the eyes of the customer: It is important to fully understand
what the customer requires and then apply technology. Not the other way around.
Conversations between the customer and IT on numerous levels are inevitable to ensure
direction and alignment and promises transformation with considerable benefits.
iii. Streamline your application delivery pipeline: Automation seems to be the
answer to manual challenges and should be done gradually throughout the
environments. All deployment processes should be done in conjunction with test
processes to ensure alignment and exclude disruptions. Automate whatever you
can, not only the software development process but also the whole infrastructure
landscape. Automation supports the motivation for teams to adapt to the new way
of delivering services.
iv. Adopt a loosely coupled service-orientated architecture: To allow development of
new production services as quickly and flawlessly as possible, it is important to
start standardisation of key services.
v. Reward solution simplicity and reliability: Standard components make the
development of new services easier as it enables you to package them into new
services, which then can become a standard component to be used in other services.
The complexities of each service design are hidden within the package when
modular design is used. The teams should be rewarded when they find simplistic
ways of developing services and provisioning hardware.
vi. Adopt and improve how you use customer experience data: Complex systems
like technology and business requires feedback, and continuous feedback as such.
DevOps provide for two feedback lifecycle forms: They ensure that Ops is part of
the process as early as possible within the lifecycle process and secondly the testers
should also be included as early as possible. A complete lifecycle should include
feedback and feed-forward and to accomplish this the specialist knowledge from
Ops and the testers are vital from the early stages of development.
vii. Dev and Ops need to walk in each other’s shoes: The teams need to walk in each
other’s shoes if they want to fully understand each other’s environments and skills
requirements. Teams are required to be cross-functional and therefore require a
balanced set of skills with team members having all round skills instead of the ‘old-
school’ IT specialists who are only skilled in one specific role. If developers are
included in the end-user support, it will give them a good idea of what the support
staff need to deal with and what feedback is received from the end-user regarding the
development. Ops members can be exposed to the development process from an early
stage to better understand the complexities required of building a service system.
The seven habits of DevOps integrate well with the DevOps principles and can also be applied
throughout the IT environment. It also forms part of the proposed multi-dimensional conceptual
framework.
Figure 3: Multi-Dimensional Conceptual Framework for Delivering Quality IT Services (Source: Author)
6. Conclusions
This article focused on presenting a multi-dimensional conceptual framework that can be applied
in IT organisations to improve the quality of service delivery to their customers. The most popular
ITSM standards framework, ITL was presented to provide the background of the recently formed
VisibleOps framework, being used in the proposed framework. Due to the rapid rate at which IT
and its requirements are changing, the Lean methodology was presented and specifically the Lean
enterprise pyramid was identified to be used in the proposed framework as the literature review
highlighted that Lean assist organisations to improve customer value, decrease waste and optimise
IT operations. The DevOps approach was presented to stress the importance of integration and
continuous improvement.
IAMOT 2019 | 806
A Multi-Dimensional Information Technology Service Quality Framework
The proposed conceptual framework will assist IT leaders to apply key concepts to IT processes,
applications, information, infrastructure and people to ensure delivery of quality IT services to
their customers.
Further research will be done to validate the framework in a Higher Education Institution
environment. The framework will be re-evaluated and adapted once feedback from the interviews
are received. Future research will focus on validating the framework in other HEIs in South Africa
with the aim of integration in all types of organisations.
References
Addy, R. (2007), Effective IT Service Management To ITIL and Beyond. New York: Springer.
Adomavicius, G., Bockstedt, J., Gupta, A. and Kauffman, R., (2008), Making Sense of Technology Trends in the
Information Technology Landscape: A Design Science Approach. MIS Quarterly, 32(4), 779-809.
Akins, P., (2016), Comparison between Waterfall, Agile, Lean and DevOps. [online] Available at https://medium.
com/@banshy4real/comparison-between-waterfall-agile-lean-and-devops-e50236977df2 [Accessed
March 2017].
Andriola, T. et al., (2015), Technology in Higher Education: Defining the Strategic Leader. [Online] Available at
http://www.educause.edu/ero/article/technology-higher-education-defining-strategic-leader [Accessed
12 June 2015].
Atos., (2014), DevOps the Journey of Continuous Delivery Implementation. [Online] Available at https://atos.net/
content/dam/global/documents/we-do/atos-devops-whitepaper.pdf [Accessed May 2016]
Behr, K. Kim, G. and Spafford, G., (2014), The Phoenix Project A Novel about IT, DevOps and Helping Your Business Win
(Revised ed). USA: IT Revolution Press.
Behr, K., Kim, G. and Spafford, G., (2016), The Visible OPS Handbook Implementing ITIL in 4 Practical and Auditable
steps (12th Printing ed). Eugene, Oregon: IT Process Institute.
Bell, S. C. and Orzen, M. A., (2011), Lean IT: Enabling and Sustaining your Lean Transformation. New York: Taylor and
Francis Group.
Betz, C., (2016), Implications of digital transformation, Agile, and DevOps for IT curricula, with recommendations.
Minnesota: University of St. Thomas.
Casares, J. et al., (2013), The Future of Teaching and Learning in Higher Education. Rochester, NY: Rochester Institute
of Technology.
Chester, T., (2010), Assessing What Faculty,Student and Staff expect from Information Technology Organizations in
Higher Education. Boulder, Colorado: ECAR.
Chingang, N. D. and Lukong, P. B., (2010), Using the SERVQUAL Model to assess Service Quality and Customer Satisfaction.
[Online] Available at http://www.diva-portal.org/smash/record.jsf?pid=diva2%3A327600&dswid=-7063
[Accessed 12 April 2016].
Creswell, J. W., (2014), Research Design: Qualitative, Quantitative, and Mixed Methods Approaches (4th ed.).
California: SAGE Publications.
Cronholm, S., and Salomonson, N., (2014), Measures that matters: service quality in IT service management.
International Journal of Quality and Service Sciences, 6(1), 60-76.
DeMartine, A., and Bitner, K., (2014), The Seven Habits of Effective DevOps. Cambridge(MA):Forrester Research.
De Waal, A., (2012). The Role of Information Technology in the High Performance Organisation. [Online] Available at
http://www.sas.com/en_ph/whitepapers/the-role-of-information-technology-in-the-high-performance-
organization-103628.html [Accessed August 2016].
Diana, A., (2015), How to Create a DevOps Culture. [Online] Available at https://www.enterprisetech.com/2015/04/22/
how-to-create-a-devops-culture/ [Accessed 20 August 2017].
Dumitriu, D., (2008), Assuring Quality in IT Service Management. UPB Scientific Bulletin Series D, 70(1), 145-154.
DuMoulin, T., (2015), DevOps and ITSM: Defining Value From Two Sides Of The Same Coin. Burlington, Canada: Pink Elephant.
DuMoulin, T., (2016), The Pessures of Demand and Supply: Making IT Better, Faster, Cheaper. [Online] Available at
https://leankit.com/blog/2016/09/pressures-demand-supply-it-value-streams/ [Accessed October 2016].
Fiampolis, P., and Groll, J., (2016), Bringing together Dev and Ops. [Online] Available at http://www.trainingjournal.
com [Accessed May 2016].
Fisk, R., Brown, S., and Bitner, M., (1993), Tracking the evolution of the services marketing literature. Journal of
Retailing, 69(1), 61-102.
Galup, S. D., Dattero, R., Quan, J., and Conger, S., (2009), An Overview of IT Service Management. Communications of
ACM, 52(5), 124-127.
Gartner, (2015). Top 10 Strategic Technologies Impacting Education in 2015, Sydney, Australie: Gartner, Inc.
Gilmore, T., (2016), DevOPs and the Theory of Constraints.
[Online] Available at http://www.agiletestingframework.com/devops-and-the-theory-of-constraints/
[Accessed May 2016].
Goldstein, P., (2006), The future of Higher Education: A view from CHEMA Washington, D.C.:Council of Higher
Education Management Association.
Grajek, S., (2014), EDUCAUSE Review Online: Why IT Matters to Higher Education. [Online] Available at http://www.
educause.edu/ [Accessed 25 August 2014].
Grönroos, C., (1984), A Service Quality Model and its Marketing Implications. European Journal of Marketing, 18(4),
36-44.
Grönroos, C., (2007), Service Management and Marketing: Customer Management in Service Competition (3rd ed.).
Chichester: John Wiley & Sons.
Hodges, R., (2016), IT Service Management for DevOps. Germany: IBM.
Huang, M. H. and Rust, R. T., (2013), IT-Related Service: A Multidisciplinary Perspective. Journal of Service Research,
16(3), 251-258.
Jackson, M., (2003), Creative Holism for Managers. Chichester: John Wiley & Sons, Ltd.
Johnston, R., (1995), The determinants of service quality: satisfiers and dissatisfiers. International Journal of Service
Industry Management, 6(5), 53-71.
Kim, G., (2014), Trust me: The DevOps Movement fits perfectly with ITSM. [Online] Available at http://www.
theitsmreview.com/2014/03/trust-devops-movement-fits-perfectly-itsm [Accessed 01 October 2016].
Kim, G., Humble, J., Debois, P. and Willis, J., (2016), The DevOps Handbook - How to ceate world-class agility, reliability,
and security in technology organisations. Portland: IT Revolution Press, LLC.
Koester, J., (2011), Information Technology and Tomorrow’s University. Educause Overview, 46(1), 34-43.
Lean IT Association., (2015), Lean IT Association. [Online] Available at http://www.leanitassociation.com/ [Accessed
October 2016].
Lovelock, C., and Wirtz, J., (2007), Service Marketing: People, Technology, Strategy (7th Ed.). Boston:Pearson Prentice
Hall.
Lowendahl, J.M., (2015), Hype Cycle for Education 2015. [Online] Available at https://www.gartner.com/doc/3090218
[Accessed February 2016].
Meziani, R. and Saleh, I., (2010), E-government: ITIL-based Service Management case study. In Proc. 12th Int. Conf.
Information, pp. 509-516. Paris:France.
Modig, N. & Ahlstrom, P., (2015), This is lean resolving the efficiency paradox (1st ed.). Halmstad: Rheologica.
Montgomery, A., (2016), Intelligent Management (or How to Train Your Phoenix). [Online] Available at
http://www.intelligentmanagement.ws/?s=how+to+train+your+phoenix [Accessed 25 May
2016]. Parr, C., (2014), At the Heart of the Higher Education Debate. [Online] Available at
http://www.timeshighereducation.co.uk/news/6-trends-that-will-accelerate-the-adoption-of-technology-
in-higher-education/2/2011131.article [Accessed 02 September 2014].
Prasad, R. K. and Jha, M. K., (2013), Quality Measures in Higher Education: A Review and Conceptual Model. Journal of
Research in Business and Management, 1(3), 23-40.
Reinertsen, D., (2009), Principles of Product Development Flow Second Generation Lean Product Development.
Redondo Beach, CA: Celeritas Publishing.
RightScale, (2015), State of the Cloud Report, Santa Barbara, California: RightScale Inc.
Saunders, M., Lewis, P. and Thornhill, A., (2009), Research Methods for Business Students (5th ed.). Essex, UK: Pearson
Education Limited.
Sayer, N. J. & Williams, B., (2007), Lean for Dummies. Hoboken, NJ: Wiley Publishing, Inc.
Schwarz, S., Dust, C. and Bodendorf, F., (2012), A Conceptual Framework of Service Innovation and Its Implications for
Future Research. In Proceedings of the 2012 Annual SRII Global Conference. Nuremberg, Germany.
Sedge, T., (2014), Demystifying Change: Agile, Lean, TOC, Systems Thinking & 6-Sigma (Part II). [Online] http://www.
ambitiousmanager.com/demystifying-change-agile-lean-toc-systems-thinking-6-sigma-part-ii/ [Accessed
August 2016].
Senn, L., (2015), The Four Principles of Culture Change. [Online] Available at http://www.heidrick.com/Knowledge-
Center/Article/four-principles-of-culture-change [Accessed 03 September 2017].
Shark, A. R., (2015), The Digital Revolution in Higher Education. Alexandria, Virginia: Public Technology Institute.
Sharma, S. and Coyne, B., (2015), DevOps for Dummies, 2nd IBM Limited Edition (2nd ed.). Hoboken, New Jersey: John
Wiley and Sons,Inc.
Spafford, G. and Wilson, N., (2015), A CIO’s Guide to DevOps. Orlando, FL, Gartner.
University of California., (2013), IT Service Management Office Search formSearch. [Online] http://itsm.ucsf.edu/lean-
it [Accessed 02 June 2017].
[57] Van der Zee, H., Blijleven, V. and Gong, Y., (2015), Lean IT Partnering: How Partners Create Value by Developing a
Lean Culture for IT Supply and Management (Second ed). Zaltbommel, Netherlands: Van Haren Publishing.
Von Bertalanffy, L., (1968), General System theory: Foundations, Development, Applications. New York: George
Braziller.
Voss, R., Gruber, T. and Szmigin, I., (2007), Service quality in higher education: The role of student expectations. Journal
of Business Research 60(9), 949-959.
Wienberg, G. M., (2001), An Introduction to General Systems Thinking (25 Anv edition ed). New York: Dorset House.
Wilsenach, R., (2015), DevOpsCulture. [Online] Available at https://martinfowler.com/bliki/DevOpsCulture.html
[Accessed 07 June 2017].
Wurster, L. F. et al., (2013), Emerging Technology Analysis: DevOps a Culture Shift, Not a Technology. [Online] Available
at https://www.gartner.com/doc/2571419/emerging-technology-analysis-devops-culture [Accessed May
2016].
Zeithaml, V., Gremler, D. and Bitner, M., (2009), Services Marketing: integrating customer focus across the firm (5th
ed.). London: McGraw-Hill.
Zeithaml, V., Parasuraman, A. and Berry, L., (1985), Problems and strategies in service marketing. Journal of Marketing,
49(1), 33-46.
Zeng, J., (2007), Improving IT Service Delivery Quality: A Case Investigation. Journal of American Academy of
Business 12(1), 24-31.
Marina Arkhipova
National Research University Higher School of Economics,
Department of Statistics and Data Analysis, Russia
E-mail: archipova@yandex.ru
Viacheslav Sirotin
National Research University Higher School of Economics,
Department of Statistics and Data Analysis, Russia
E-mail: vpsirotin@yandex.ru
Yan Buzhinsky
Katholieke Universitet Leuven, Faculty of Business and Econimics
E-mail: ybuzhinskiy@gmail.com
Abstract
The paper is focused on the problem of investments in young high-tech companies. The tools for financing of
high-tech projects are changing along with the progress in technological development, and new source of such
investments is Initial Coin Offering (ICO) which claims universality, but is most in demand in the field of high
technology. To be more specific about the issue we need additional research aimed at the finding of the particular
determinants making ICO attractive for investors. In this paper we introduce a model for estimation of the success
for funding via ICO and analyze the results of its specification and identification.
We consider the amount of funds raised and achievement of the fundraising goal as the most important metrics
for the success of ICO and create models to find their determinants. The methodology of the research is based on
regression and discriminant analyses and Blinder–Oaxaca decomposition. Using this method allows us to estimate
the influence of different factors on the success of ICO. The dataset for the model identification was taken on the
Internet by parsing sites of the companies and aggregators paying attention to the problem of representativeness.
Modelling results for the amount of funds and for the success of ICO have shown the importance of the company
popularity on the thematic forum while popularity on the general platforms like Twitter turned out to be non
significant. The significant effect on the dependent variable was shown by the particular algorithm of consensus
which is using by company and the education level of its CEO. It is also interesting that real estate and trading
companies obtain lower value of investments via ICO than others.
The results of the research show that ICO is one of new instrument for funding innovation development. It is quite
competitive with venture funding and can provide additional support to creating and using innovations.
Keywords: Funding of Innovation Development; Determinants of Funding Success; Regression Models;
Discriminant Analysis; Virtual Currency
1. INTRODUCTION
The industry of innovation and high technology in business has changed dramatically in the last two
decades. Emerged in 1995 along with the “dotcom boom” for the industry development, aiming at
the centralized digitalization and the Internet, have lost their relevance in late 2010. To replace the
above mentioned concepts came robotics and decentralized systems. Classical work (Nakomoto,
2008) offers the use of computing power of network computers to confirm the correctness of the
algorithm of actions on the computer of the contractor. This method can significantly reduce the
cost of third-party expertise to achieve consensus. Now this technology is known as “blockchain”.
Blockchain is the most widely used in those industries where users need security and speed of
operations. In the financial sector, the technology is also used to collect funds from investors.
Basically, young high-tech companies attract investments in this way, this process is called “initial
coin offering” (ICO).
In lots of papers such as (Conley, 2017), (Cerezo, 2017), authors analyze the phenomenon of this
new investment tool operating with virtual currency. Some authors discuss the influence of some
factors on the success of ICO, e.g. (Kaal et al., 2017) present two groups of such factors - media and
innovativeness.
Interest in ICO is growing at a tremendous pace: from 2015 to 2017, the number of companies that
carried out the initial placement of coins increased from 15 to 1266 (Coindesk: Stats). The increase
in the number of ICO projects has a negative impact on the quality of attracted investments.
The relevance of this study is justified by the high interest in ICO both among companies and among
investors in recent years, while in the academic environment the phenomenon is less studied. The
study helps to Orient themselves in the information field ICO. The main idea behind this research is
to define factors supported improvement the quality of investment via new financial tools based on
new digital technologies. To do this we have to answer the questions. What should we consider as
a success of the ICO? What fields are most applicable for such kind of investments? Does the kind
of block chain technology application matter? Is the educational level of top manager significant in
the success of the investments?
The main sources of information for this study was the websites-the aggregators of data about the
ICO: icorating.com, tokendata.io icobench.com, icodrops.com and others. Data on the variables
used in the analysis were collected using parsing scripts in the Python programming language using
the request and BeautifulSoup libraries or manually.
In (Wilmoth J., 2017) three main roles of tokens are highlighted: tokens-shares (equity token),
investment tokens (security token) and utilitarian tokens (utility token). The ICO of the company
selling tokens is the closest to the public offering of shares (IPO), since the rights to claim part of
the profits from the company’s activities are on sale. Such tokens are sold during ICO of financial
companies and cryptocurrency funds (Crypto20, Kick).
Investment tokens are most close to the definition of a market valuable asset – a tradable good that
has real security under it. It is this kind of token that is often implied when it comes to coins. This is
due to the fact that, like any currency, investment tokens act as an internal settlement equivalent of
the system. Utilitarian tokens are also used as a payment for the use of the tool of the company that
issued the tokens e.g. for storing large amounts of data decentralized using the computing power of
the company.
In (Mougayar, 2016) the author divide tokens at categories according to their role and corresponding
mission: suffrage (involvement of a user), mean of exchange (market creation), toll (mean of payment),
share of stock (distribution of benefits), and others. But the classification of most frequently used
tokens seems to be more compact and include equity tokens, security tokens and utility tokens. Most
often, companies issue utilitarian tokens, since many high-tech companies participate in the ICO,
which offer the use of new technology. On average, all ICO roles are distributed in approximately
70% of utilitarian tokens , and about 30% equity tokens and security tokens in approximately equal
shares (Wilmoth, 2017).
There are various indicators of the success of the investment campaign. The amount of funds raised
can hardly be used as the only one, and the achievement of the established result of fundraising is
often no less important. The decline in the proportion of successful ICO from the perspective of
achieving targets is unfortunately the trend in recent months. While the share of successful ICO in
their total number was 13/15 in 2015, 190/220 in 2016, 848/1266 in 2017, and, finally, 212/380
in the first quarter of 2018 year. It provides the increasing interest in finding determinants of the
success of investment campaigns.
To test the working hypothesis about the substantial influence of education level of the head of the
company we introduce dummy variable
Mba = (1, if CEO has PhD or MBA degree, and 0, o/w).
Using dummy variables we also can include factors of the block chain technology used:
P1-P3 (binary variable is equal to a unit, if corresponding technology is used by the company: proof-
of-work for P1, proof-of-stake for P2, own consensus-method for P3, and zero, o/w).
About 60% of companies use their own method of checking the user’s work to determine the reward,
about 24% use a universal algorithm proof-of-work and 18% have implemented an improved
version of it – proof-of-stake. We can expect that only the use of the algorithm of consensus by
proof-of-stake (P2) makes significant differences in the volume of attracted investments and the
implementation of the goals.
R1-R3 - dummy variable presenting the role of token in the system (1, in the case of equity token for
R1, security token for R2, and utility token for R3, and 0, o/w).
Ind - a family of cross-dummy binary variables, presenting the category of the company in five
groups (see table 1).
Table 1: Number of Companies in the Sample for Each Group and Category
Group (Industry) Category Number of cases
Blockchain 15
Blockchain Blockchain services 47
Blockchain contracts 6
Banks 13
Currency 11
Finance
Finance 16
Trading 17
PR 7
Marketing Trading platform 13
Media 6
Business 5
Crowdfunding 7
Healthcare 4
Real estate 8
Business and Society Social networks 10
Data processing 5
Computer games 13
Technologies
High technologies 11
Security 8
All this variables can potentially influence on the depended variables, presented the result of the
investment process:
i. ln (Inv) - logarithm of the investments collected in the process of ICO;
ii. Goal - meeting the fundraising goal (1-goal met, 0-less investment raised than
planned).
To define the significance of the influence on each of them the particular model was created.
where X is a vector of dummy variables including variables Mba, Demo, Ind, P, R. The results of the
model identification are presented in table 2.
Table 2: Estimates of the Regression Model Coefficients for the Amount of Investments
9,725***
c
(1,339)
0,546
λ
(0,156)
0,691***
Ln(Bit)
(0,136)
0,542
Ln(Twt)
(0,146)
-0,196
Dst
(0,653)
-0,097
Demo
(0,613)
0,600**
P1 (proof-of-work)
(0,414)
0,030
P2 (proof-of-stake)
(0,371)
0,486
R1 (equity token)
(0,433)
0,275
R3 (utility token)
(0,326)
0,608**
Mba
(0,499)
0,673*
Ind6 (Finance)
(0,725)
-1,095*
Ind7 (Trading)
(0,818)
-1,115
Ind14 (Real estate)
(0,971)
***p-value<0,01; ** p-value <0,05;* p-value <0,1.
Determination coefficients for this model are as follows: R2 = 0,571 ; R2adj = 0,470.
The greatest contribution to the explanation of the variance of the logarithm of the volume of
attracted investments is the popularity of the company’s page on the thematic forum bitcointalk.
org. At the same time, the popularity of Twitter was insignificant in the model. It is worth noting the
importance of the coefficient in the variable Mba. For a company whose head has an MBA or PhD
degree, the volume of investments attracted during the ICO is higher on average, which confirms the
hypothesis of the impact of the managerial qualities of the head of the company. Also important was
the belonging of the company to three categories: Finance, trading and real estate market.
The objective of the next regression model is to assess the probability of achieving the stated goal
of raising capital. Since the dependent variable in this case is binary the logit model was chosen for
regression analysis. Modelling results are presented in Table 3.
Table 3: Estimates of the Logit-regression Model Coefficients for Achievement the Fundraising Goal
Coefficient
Variable
(st. deviation)
11,115***
c
(2,354)
0,478***
Ln(Bit)
(0,212)
0,437
Ln(Twt)
(0,149)
0,746
Dst
(0,862)
-0,119
Demo
(0,414)
0,592**
P1 (proof-of-work)
(0,371)
0,477
P2 (proof-of-stake)
(0,470)
0,926
R1 (equity token)
(0,673)
-0,167
R3 (utility token)
(0,429)
0,704**
Mba
(0,511)
-1,086*
Ind3 (Smart contracts)
(1,070)
-1,012*
Ind10 (Media)
(1,124)
-0,885
Ind12 (Crowdfunding)
(1,131)
The increase in page views on the forum bitcointalk.org, high CEO degree level, and using of proof-
of-work algorithm make the probability of the investment success higher. According to both models,
the companies of some categories have on average lower level of investment or less probability to
gain the planned sum via ICO.
After further dividing the companies in a sample by two groups using discriminant analysis
technique, we decomposed the difference in the mean of the investment Ln(Inv). To do this we used
the Blinder-Oaxaca decomposition (Wooldridge, 2002). It shows that the difference in the number
of page views on the crypto assets forum explains the difference between the volume of investments
in companies from the first and second groups by more than 17%. Two times less contribution to the
explanation of the difference is made by the fact of the presence of a scientific or business degree
of the company CEO.
4. Conclusions
The media factor along with the quality of the company’s management is the key to the success of
the initial coin offering, while the technical features of the product are inferior to the contribution to
the success of the ICO. These factors define the success of ICO in terms of probability theory: their
favorable values doesn’t obviously provide the success, but they foster it more efficient then other
considered factors.
The hypothesis of significant differences in the categorical affiliation was confirmed only partially:
it was possible to identify those ICO categories where the placement of coins is likely to be
unsuccessful.
5. Acknowledgements
This work was supported by a grant of Russian Foundation for Basic Research №18-010-00564
Modern Tendencies and Social and Economic Consequences of Digital Technologies Development
in Russia.
References
Adhami, S., Giudici, G., and Martinazzi, S. (2018). Why Do Businesses Go Crypto? An Empirical Analysis of Initial
Coin Offerings. Journal of Economics and Business, Forthcoming, pp. 1–36.
Buterin, V. (2017) Analyzing Token Sale Models. Vitalik Buterin’s website.
Burniske C. (2017). Cryptoasset Valuations. Medium.
Cerezo Sánchez, D. (2017) An Optimal ICO Mechanism. MPRA Paper 81285, University Library of Munich, Germany,
pp. 1–17.
Conley J.P. (2017). Blockchain and the Economics of Crypto-tokens and Initial Coin Offerings. Medium.
Dannen, C. (2017) Introducing Ethereum and Solidity. Professional and Applied Computing
Elender, H. (2017) The cross-section of crypto-currencies as financial assets: An overview // Collaborative Research
Center 649: Economic Risk, Humboldt University Berlin, 2017
Hall, J. and Hofer, C. (1993). Venture capitalists’ decision criteria in new venture evaluation. Journal of Business
Venturing 8(1). pp.25–42
Hegadekatti, K. (2017) Brand Tokenization and Monetization Through Cryptocurrencies MPRA Paper 82833,
University Library of Munich, Germany.
Kaal, W., Dell’Erba, M. (2017) Initial coin offerings: emerging practices, risk factors, and red flags. Medium.
Kuo Chuen, David Lee and Guo, Li and Wang, Yu, Cryptocurrency: A New Investment Opportunity? (October 24,
2017)
Mougayar, W. (2016). The Business Blockchain: Promise, Practice, and Application of the Next Internet Technology.
Wiley.
Rohr, J., Wright, A. (2017). Blockchain-Based Token Sales, Initial Coin Offerings, and the Democratization of Public
Capital Markets. Medium
Wilmoth, J. (2017). 3 Types of ICO Tokens. StrategicCoin
Wooldridge, J. (2002). Econometric Analysis of Cross Section and Panel Data. Cambridge, MA: MIT Press.
Venegas, P. (2017). Initial Coin Offering (ICO) Risk, Value and Cost in Blockchain Trustless Crypto Markets. Journal
of Economics and Business. pp.1–34
Zetzsche, D. (2017) The ICO Gold Rush: It’s a scam, it’s a bubble, it’s a super challenge for regulators. Smithandcrown
Research.
Sanjeev Chachondia
Parivartan Advisors LLP, India
E-mail: parivartanlab@gmail.com
Pranusha Manthri
Group on Competitiveness Shailesh J.,
Mehta School of Management, IIT Bombay, India
E-mail: pranushamanthri@gmail.com
Abstract
India has remarkable achievements in innovation through revolutions such as green, white, mobile and solar. With
India leading international partnerships like the International Solar Alliance and targeting an installation of 100 GW
of solar power by 2022 under the National Solar Mission, it has set itself on a mission to attain global leadership
position in solar energy. However, the mission is compounding the vexing problems such as ‘less sustainable trade
deficits’ and ‘slow break-out for competitiveness’. At this juncture, the external competition and slow break-out in
internal capabilities (including MoT capabilities) across its solar value chain have added to the burgeoning trade
deficit of India.
The Economic Survey 2018 identified the renewable energy sector as Champion Sector in Make in India 2.0 which
has brought a renewed focus on the manufacturing capabilities of firms of Indian origin (FIOs) in the renewable
sector. In this light, this paper explores the twin impact of the policy and technology management to improve the
competitiveness of solar FIOs. The study begins with identification of drivers of competitive advantage in the
Solar Photovoltaic (SPV) industry and an assessment of the gaps in the government policies. In the next stage,
the study focuses on identification of constraints across the solar value chain, especially gaps in Management of
Technology (MoT), which have led to decrease in competitiveness of FIOs. Based on the findings, a MoT strategy
is devised with an objective to build capabilities and scale-up domestic SPV manufacturers. For this we adopted a
mixed-method approach as a research methodology, focusing both on quantitative and qualitative analysis. This is
followed by a systematic ‘problem structuring’ method to identify the root cause of low industrial competitiveness
among Solar FIOs. The study also explores, which FIOs have resources to sustain competitiveness in solar, as China
has done with firms such as Yingli, Jinko Solar, Trina Solar through benchmarking analysis.
Our study is verified and supported by experiential insights derived through primary research and personal interviews
of private and public policy experts in the solar domain. The paper contributes towards building practical knowledge
about gaps in ‘strategy of firms’ and ‘policies of governments’ that hinder the ‘rapid turnaround’ of capable solar FIOs
to start competing internationally on relevant parts of ‘solar industry value system’. This is also an exercise of learning
lessons from the leaders, to propel India into envisioned leadership position in solar manufacturing.
Keywords: MoT Strategy, Solar Value Chain, Policies for Renewables, Solar FIOs, Trade Competitiveness, Venture
Competitiveness, Technology Innovation
1. Introduction
consumption which is currently at 1/15th of USA and 1/5th of China’s total energy consumption.
According to report by NITI Aayog, a policy think tank of Government of India (GoI), the energy
demand in India is likely to go up by 2.7-3.2 times between 2012 and 2040, to cater to the population
which is likely to rise to 1.6 billion by 2040. The report further highlights, that during this period
the import demand could increase from 31% in 2012 to 36-55% in 2040 which will have an adverse
impact on India’s economy and energy security.
The current energy mix of India (Figure–1) is dominated by Thermal energy generated from
Coal, Gas and Oil. Renewable energy sources (RES) and technologies have potential to provide
solutions to the longstanding energy problems being faced by the developing countries such as India.
Along with the aim to address the energy security, India is looking to use renewable energy to meet
multiple objectives like energy efficiency, decarbonization and sustainability, among others.
Solar power, one of the potential energy sources, is a fast developing industry in India. In the
country’s renewables mix, contribution of wind power is at 49% (34 GW) and solar power is at 31%
(21.7 GW) as on March 2018 (MNRE Database).
a low carbon future and achieve India’s emission targets as pledged in its INDCs at United Nations
Framework Convention on Climate Change (UNFCCC), Paris Agreement 2015. The NSM, is also a
step towards achieving the mission to reduce oil imports by 10% from (2014-15 levels) by 2022 as
targeted by the Ministry of Petroleum, GoI.
A recent example of the plan in action is the massive 2GW Pavagada Solar Park in the state of
Karnataka, which inaugurated its 600MW first phase in March 2018 and the launch of programmes
such as SRISTI, KUSUM to accelerate the solar power generation in India which can help India
attain the Sustainable Development Goals 2030 on ‘Clean Energy’. The formation of International
Solar Alliance (ISA) after the Paris Agreement 2015 also indicate that India is aiming for a global
leadership position in driving renewable energy markets.
2. Research Questions
The overview of the solar power sector suggests that the government has set ambitious targets
for deployment. However, it is dependent on the private sector to drive these initiatives. India has
massive trade deficit in Solar PV Industry (Figure-2), indicating the lack of competitiveness of
Indian manufacturers.
Figure 2: Trends in Export and Import Data of SPV Cell in India (in USD million)
and Country-Wise Imports Data for 2017-18
Source: Export-Import Data Bank, Dept. of Commerce, Ministry of Commerce and Industry, 2018
Trend analysis of EXIM data of Solar PV segment over the past five years indicate that the imports
have risen in line with growth in capacity addition but exports have seen a significant downward
trend. The imports have increased at CAGR of 40.1%, while the exports have declined simultaneously
at CAGR of -12.9% leading to a huge trade deficit, cumulative of 2.3% of India’s total trade deficit
in FY 2017-18.
India imports more than 90% of the Solar PV Cells from China. The burgeoning trade deficit is
indicative of low trade competitiveness (Manthri et al., 2015) of the domestic solar manufacturers
when compared to the international players. China currently holds 53% global market share in
the PV module production (pv-magazine, 2018) and hence poses as an interesting case study to
benchmark the competitiveness of Indian PV manufacturers.
3. Methodology
The paper has a dual objective–of recommending modifications to MNRE’s Solar Policies and
provide Technology Management strategies to Solar FIOs in renewable energy to regain & scale-up
trade competitiveness. Based on the analysis key implications are drawn for the policy makers, as
well as the senior executives in the renewable industries.
Figure 3: Cumulative Solar PV Capacity in Leading International Markets and Decreasing Global
Weighted Average Total Installed Costs for Solar PV (USD/ KW) for Period 2010-17
Figure 4: Dip in the Solar Tariffs (₹/Wp) and Plummeting Solar Module Prices in India and China ($/Wp),
Indian Manufacturers at Price Disadvantage when Compared to Chinese Competitors
Thus the expansion of the cumulative capacity of the solar power sector in India, is a top-down
decision made by the GoI, whereas in China the policy decision was pressured by the manufacturing
sector in need of support. As a consequence of this, India SPV sector suffers from technical barriers,
policy barriers and socio-economic barriers in the development of the solar sector (Kok, S., 2015).
The barriers can be highlighted further by benchmarking Solar FIOs with the international leaders.
This will help us understand the current competitive position of Indian manufacturers and assess
their strengths and weaknesses to overcome challenges and become sustainable in the long-run.
Figure 6: Comparison of Domestic Manufacturers with Global Leaders with Respect to Revenue/ Year
(Since Incorporation, in USD mn) and Revenue/ Employee (in USD mn), Bubble Size
Indicates the Revenues of Companies in FY’2017
Source: Company Filings
Trends indicate that Indian players need to jump much higher to compete with the Chinese giants.
However higher efficiency of human capital for Indian firms vis-à-vis Chinese firms can be the
driver of growth as seen in the case of First Solar. The big domestic module manufacturers like
Adani Solar, Vikram Solar, TATA Solar Power and Waaree can focus on scale-up and supply-chain
development to develop a competitive edge over the Chinese manufacturers. Other uncompetitive
sub-scale domestic players such as MB Solar, EPPPL can initially focus on attaining sustainability,
or go for consolidation as we have observed that many players have already started to downsize
its employees and almost reached the verge of bankruptcy. For achieving scale and supply-chain
development, addressing the gaps in technology levels and conversion efficiencies is crucial.
The raw materials costs for modules (which includes Solar Cell, glass, Aluminium frame, Interconnect
Ribbon, etc) comprise 70-80% and the working capital comprises 12-15% of the majority of
manufacturing costs (Verma, B. et al., 2017). The incentives given on capital investment
by Central and State government are not very helpful in lowering the cost of manufacturing.
The key requirements of the Solar developers is access to funding, lower Capex, lower cost of
energy (higher efficiency and performance) and ease of installation, operation & maintenance
(Chachondia, S., 2014).
The key requirements of the Solar developers need to be addressed, along with technology
improvements, which is the third most important key driver for cost competitiveness. Factories in the
U.S, China and India do not have access to the same manufacturing technology leading to problems
in uneven product quality. Hence, there is a need to analyse the role of Technology management and
innovation to scale-up Solar FIOs.
The patent evolution data suggests at low technology development and innovation in India. Global
PV leaders invest heavily in research and development (R&D), with R&D expenses of some
key players like LONGi Group investing 7% of total revenue as R&D, while Sun Power and
GCL-Poly both invested 4% in R&D during FY’2017. On the contrary, vast majority of the
Indian SPV manufacturers resort to the use “off-the-shelf” technology (De La Tour, et al., 2011).
Investments of major Indian manufacturers R&D and equipment enhancements were non-existent
which further made the domestic PV industry less competitive (Johnson, 2013).
When Government focus on diffusion led policy and firms respond with faster deployment but with
low focus on technology development, it often results in even the leading Indian firms choosing
opportunistic growth rather than capability building path through technology management and
innovation. We have seen this same trend in Telecom earlier (Momaya and Chachondia, 2014)
which is getting repeated in Solar now. There needs to be a policy focus in promoting sustainable
innovation in Solar fields whilst providing financial incentives. The Indian solar industry is required
to be building strong linkages with academic institutions and making collaborative research efforts
with the government and that only can build sustainable innovations (Momaya, et al., 2013).
With the intense competitive pressures and a rapidly evolving PV module market, technology
innovations are crucial to module manufacturers ability to remain profitable. Based on the above
analysis, our study identifies and prioritizes the root causes of low technology management of Indian
manufacturers which affects their industrial competitiveness.
4. Research Findings
A systematic ‘problem structuring’ approach, helps us to arrive at Root Cause Analysis (RCA)
of vexing problems such as lack of significant Management of Technology (MoT) and improving
capabilities and trade balances for firms of Indian origin, particularly in emerging segments of
renewable industries. It helps us to identify the major gaps in government policies, in order to
enhance technology management and innovation.
The fish-bone illustration below, thus identifies the factors external to the industry (on the top half)
and the factors internal to the industry (on the bottom half) which are the root cause of low technology
management in Solar FIOs.
Figure 9: Root Cause Diagram (RCD) for Low Focus of Solar FIOs on MoT
7. Concluding Remarks
Quite useful patterns emerge to characterise the opportunities and problems related to solar industry
in India. Massive and widening trade deficits threaten technological and capability building and
ultimately competitiveness of FIOs. While some root causes can be attributed to policy and other
factors external to FIOs, good number of root causes can be attributed to FIOs.
Our study highlights that for India to emerge as leader in the renewable energies, the competitiveness
of the FIOs needs to be enhanced through a three-fold focus on the cost reductions, policy support
and technology management. This will have practical implications on the trade competitiveness of
Indian FIOs vis-à-vis Chinese manufacturers and contribute towards their sustainable growth.
8. Acknowledgements
We are thankful to IIT Bombay and the Wadhwani Foundation and Industrial Research and
Consultancy Centre (IRCC) for providing financial support. Inputs and suggestions provided
by associates of Group on Competitiveness (GoC), SJMSOM, IIT Bombay, Sneha Bhat are
acknowledged.
Appendix A: Market Share of Domestic Module Manufacturers based on Q4’17 capacity, MW
References
De la Tour, A., Glachant M., Y. M´eni`ere, (2011) Innovation and international technology transfer: The case of the
Chinese photovoltaic industry. Energy Policy, Elsevier, 2011, 39 (2), pp.761-770
Goodrich, A.C., Powell, D.P., James, T.L., Woodhousea, M. and Buonassisi, M, (2013), Assessing the drivers of
regional trends in solar photovoltaic manufacturing. Energy Environ. Sci., 2013, 6, 2811
INDIA Solar Handbook, 2017, BRIDGE TO INDIA, 2017 https://www.bridgetoindia.com/wp-content/uploads/2017/05/
BRIDGE-TO-INDIA_India-Solar-Handbook_2017-1.pdf
IRENA Power Costs 2017, IRENA Database– https://www.irena.org/-/media/Files/IRENA/Agency/Publication/2018/
Jan/IRENA_2017_Power_Costs_2018.pdf
Johnson, O., (2013), Exploring the effectiveness of local content requirements in promoting solar pv manufacturing in
India. 2013
Kok, S., (2015), Examining Solar Energy Policy in China and India: A Comparative Study of the Potential for Energy
Security and Sustainable Development, Uppsala University, Department of Earth Sciences
Manthri, P., Bhokray, K. & Momaya, K.S. (2015). Export competitiveness of select firms from India: Glimpse of trends
and implications. Indian Journal of Marketing, 45(5), 7-13
Mercom India Research, March 2017, Mercom Exclusive: Solar Tariffs in India Have Fallen by 73 Percent Since 2010,
Mercom Capital Group https://mercomindia.com/mercom-exclusive-solar-tariffs-india-fallen-73-percent-
since-2010/
MNRE Ministry of New and Renewable Energy, Government of India., 2017
Momaya, K. & Chachondia, S. (2014, July). Review of industrial competitiveness and growth of solar firms in India:
Exploring role of technology management and policy. In Management of Engineering & Technology
(PICMET), 2014 Portland International Conference on (pp. 370-385). IEEE.
Momaya K. and Chachondia S., “Disaggregation of infrastructure and service: Learning from Indian telecom sector,”
Proceedings of PICMET ‘14 Conference: Portland International Center for Management of Engineering
and Technology; Infrastructure and Service Integration, Kanazawa, 2014, pp. 1981-1997. IEEE.
Momaya, K., Bhat, S., Lalwani, L., (2016), Institutional Growth and Industrial Competitiveness: Exploring the Role
of Strategic Flexibility Taking the Case of Select Institutes in India. Global Institute of Flexible Systems
Management, October 2016 Issue
Momaya, K.S., Manthri, P., Reddy, P.M., (2013), Organizational Innovation for Institutional Growth: Findings from a
Sustained Initiative at IIT Bombay, IEEE-ITMC Conference 2013, IEEE Explorer
New Energy Outlook 2018, Bloomberg New Energy Finance (BNEF), https://about.bnef.com/new-energy-outlook/
NREL Solar Industry Update, 2018-https://www.nrel.gov/docs/fy18osti/71493.pdf
PIB, Press Information Bureau, Government of India. 2017
Pv magazine (July, 2018), Top 10 Crystalline PV Module Manufacturer ranking, No.07-2018
Salian, S., Bali, A., Yugandhar, V., Momaya, K.S., (2018), Analysing role of Management of Technology in the Growth
of Technology Ventures, Flexible Systems Management
Verma, B., Pavaskar, G., Oluwatola, T., Curtright, A., (2017), State-level Policy Analysis for PV Module Manufacturing
in India, Center for Study of Science, Technology and Policy (CSTEP)
Chandrashekhar Chaudhari
National Institute of Industrial Engineering, Industrial Engineering,
and Manufacturing Systems (IEMS), India
E-mail: Chandrashekhar.Chaudhari.2017@nitie.ac.in
Vishwas Dohale
National Institute of Industrial Engineering, Industrial Engineering,
and Manufacturing Systems (IEMS), India
E-mail: dohale.vishwas@gmail.com
Priya Ambilkar
National Institute of Industrial Engineering, Industrial Engineering,
and Manufacturing Systems (IEMS), India
E-mail: priyaambilkar@gmail.com
R. Mukundan
National Institute of Industrial Engineering, Engineering Technology,
and Project Management (ETPM), India
E-mail: mukundan@nitie.ac.in
Abstract
Policy formation is one of the critical steps for developing countries. The prime goal of the policy formation is to
transform the country’s economy and or improve the quality of life of individual citizens of the country or society
as a whole. For every proposed policy, there is always a negative and positive impact on the industries/ companies
that are operating in the domain of policy deployment. In such situation, the industries/companies that realize the
business opportunities in proposed policy take the lead in helping the government either by shaping or supporting
the policy. At the same time, the companies finding a negative impact on them due to proposed new policy, choose
to resist or delay the deployment of the proposed new policy.
This article presents a case of an Indian Government’s proposed ‘Electric Vehicle (EV) Policy’ and how the various
relevant industries, companies and associations reacted to it. The government of India proposed a mandatory policy
for ‘Electric Vehicle’ in 2013. As per the policy, vehicles operating on conventional fuel will not be allowed by
2030. However, there were mixed reactions from the stakeholders (companies, industries etc.) who would be
impacted positively or negatively by the policy deployment.
This article attempts to examine the reaction of various stake holders using Text Mining approach and how the
proposed new policy underwent a transition. The analysis consists of:
●● Originally proposed policy
●● Reactions of the industry to the proposed policy: Shaping, supporting, opposing and slowdown to the
proposed new policy
●● Government’s reaction to the industry’s reaction and change in its stand.
Keywords: Electric Vehicle, Policy Formation, Stakeholder’s Reactions, Text Mining, Automobile Sector
1. Introduction
The conventional problems such as rise in pollution, degradation of air quality, increase in carbon
emission and an increase in conventional petroleum fuel prices becomes a trigger for the introduction
of an Electric Vehicles (Digalwar & Giridhar, 2015; Goel & Guttikunda, 2015; Grieshop et al.,
2012; Guttikunda, Goel, & Pant, 2014). India imports nearly 80% amount Rs. 43,580 crores as
per the Union Budget and Economics, 2012–2013, Ministry of Finance, Government of India) of
crude oil for automobile usage (Kumar, Anmol, & Akhil, 2015; Majumdar & Kumar, 2014). These
problems make the Government of India (GOI) decide and come up with a mandatory policy for
‘Electric Vehicle (EV)’ in 2014 (“Adoption of Electric Vehicles,” 2014). This policy stated that
“vehicles operating on conventional fuel will not be allowed by 2030.” As for every proposed policy,
there is always a negative and positive impact on the industries/companies that are operating in the
domain of policy deployment, this policy also got a set of mixed reactions from the stake-holders
(companies, industries, etc.) who are working in the policy deployment domain and would be
impacted positively or negatively by the policy deployment. The industries/ companies that realize
the business opportunities in proposed policy take the lead in helping the government either by
shaping or supporting the policy. At the same time, the companies finding a negative impact on them
due to the proposed new policy, choose to resist or delay the deployment of the proposed new policy.
In 2018, after the reaction of the different stakeholder’s Government of India took back
the mandatory clause of the policy. This paper examines the reaction of various stakeholders
using Text Mining approach and how the proposed new policy underwent a transition
from mandatory to optional. The text mining is carried out manually on the news articles
(taken as evidence for the policy progression) related to EV policy. Further, the paper is organized
as: Section 2 details out the literature review so for done on the topic viz. electric vehicle
penetration in India and pollution in India. Section 3 gives the detailed text mining of the news
from different stakeholders. Section 4 gives the conclusion and discussion of the results.
2. Literature Review
Increased pollution levels in urban areas have forced automobile companies to do innovative
thinking and found a new way of manufacturing vehicles to manage pollution. As a result, the
development of electric vehicles has gained acceptance worldwide (Maini, 2005). Further Maini
(2005), examines the case of REVA car which is the first electric car in India developed at RECC
(REVA Electric Car Company). Biswas & Biswas (1999), conducted a study to determine the
market potential of electric vehicle (EV) technologies In India. The study revealed that EV might
be a more natural option right now In developing countries like India than In developed countries
like the USA. Sabapathy (2008), analyses the trend of air quality index of 10-years in Bangalore
city. Bakker (2010), discusses the hydrogen hype in the automotive industry and how the industry,
governments and the public have now turned their eyes to the electric car for achieving a cleaner
environment by finding the clean car for the future. Wesseling et al. (2014), discusses the role of
car manufacturers and their political coalitions which changed their political strategy with respect to
the Californian zero-emission vehicle mandate over the period 2000–2013 using a longitudinal case
studies. Findings from their study shows that find that the car manufacturers became less defensive
and more proactive over a period of time and compliant in their political strategies towards the
zero-emission vehicle mandate.
Saxena, Gopal, & Phadke (2014), determines the power consumption requirement for a two-wheeler,
three-wheeler and four-wheeler light-duty electric vehicles in India. The study generates the results
in city driving conditions which entail the average electrical consumption for: two-wheeler is 33 Wh/
km for the scooter, 61 Wh/km for the 3-wheeler, 84 Wh/km for the low power 4-wheeler and 123
Wh/ km for the high power 4-wheeler. Wesseling et al. (2015), determined the relation between large
car manufacturers’ incentive and opportunity to innovate in the electric vehicle (EV) for achieving
the business strategies. Authors analyze how environmental regulation and the firm’s incentive
(measured by net income) and opportunity to innovate (measured by EV asset position, determined
from a combination of patent, partnership and prototype data) affected EV sales over the period
1990–2011. Digalwar & Giridhar (2015), using Interpretive Structural modeling (ISM) determined
the most critical factors for the promotion and development of the EV market in India. Awareness,
Government Commitment, Supplier Management, Customer Service, Financial Constraints, R&D,
Battery Technology, Industry Growth, Training are the nine factors identified in the study by authors
to conduct an ISM. The result shows that Along with commitment from the GOI, it is necessary to
create awareness among the citizens of India and the financial constraints should also be resolved
for initiating the market sales. Wesseling, Farla & Hekkert (2015), determines the variation in the
responses to the Californian ZEV mandate. Authors clustered the manufacturer’s responses in 4
categories Oppose, Slowdown, Shape and Support. Dhar, Pathak, & Shukla (2017), analyses the
role of EV in India using an energy system model ANSWER-MARKAL. The finding shows that
“ i) the 2-wheelers EV will achieve a significant share by 2050 while Electric 4-wheelers though
would have a small share even in 2050; ii) EV push policies though lead to significant diffusion of
electric 2- wheelers in India by 2030. These policies enhance diffusion of electric 4-wheelers only if
financial incentives are sustained in the long-term, iii) the application of global carbon price on the
Indian economy in the 20C stabilization scenario increases the competitiveness of EVs and results in
a near total share of electric 2-wheelers by 2030 and a sizable share of electric 4-wheelers by 2050.”
3. Methodology
This study uses the responses of the different stakeholders viz. OEM, i.e. car manufacturers’
(original equipment manufacturers), Automobile components Manufacturers, Government and the
vehicle end users, i.e. the consumers shown in Figure 1.
The responses are taken from the news articles collected from the sources viz.- livemint, Press
Information Bureau Government of India and Times of India, etc. to perform a manual text mining
to categorize the responses by these stakeholders in the four categories as Oppose, Slowdown, Shape
and Support given by Wesseling, Farla, & Hekkert (2015). Authors convert those four in two classes
as Defensive (oppose and slowdown) and Proactive (shape and support). Further authors defined
these four terms as:
3.1. Oppose
firms prevent themselves to be a part of innovation. (least innovative firms)
3.2. Slowdown
slowdown and/ or relax regulatory change, allowing the firm to maintain value for as long as possible
while buying time for their innovation strategies to create new value (prevent regulatory change).
3.3. Shape
shape the regulation in ways that benefit their technology-specific innovation strategies (innovative
firms already betting on certain technologies).
3.4. Support
support the successful implementation of the regulation (innovative firms that have no trouble
complying with the technology-forcing regulation).
In this study, news articles from 2014-2017 (4 years) have been taken for analysis purpose.
News from each year by different stakeholder is taken for the study as shown in Table 1. The
numbers in the cells shows the number of news falling under the particular category stated by
different stakeholder.
This paper tried to examine the firms’ responses to the Government of India’s EV policy using
manual text mining approach. The result shows that the major stakeholders who are getting impacted
due to mandatory EV policy show the defensive reactions which led GOI to take back their stand
on mandatory clause. This paper finally details out how the major stakeholder can impact the policy
deployment.
References
Adoption of Electric Vehicles. (2014). Press Information Bureau, Government of India, Ministry of Heavy Industries
& Public Enterprises.
Bakker, S. (2010). The car industry and the blow-out of the hydrogen hype. Energy Policy, 38(11), 6540–6544.
Biswas, T.K. and Biswas, N.M. (1999). Electric Vehicle: A Natural Option.for India? JETE Technical Review, 16(3&4),
367–373.
Dhar, S., Pathak, M. and Shukla, P.R. (2017). Electric vehicles and India’s low carbon passenger transport : a long-term
co-benefits assessment. Journal of Cleaner Production, 146, 139–148.
Digalwar, A.K. and Giridhar, G. (2015). Interpretive Structural Modeling Approach for Development of Electric Vehicle
Market in India. Procedia CIRP, 26, 40–45.
Goel, R. and Guttikunda, S.K. (2015). Evolution of on-road vehicle exhaust emissions in Delhi. Atmospheric
Environment, 105, 78–90.
Grieshop, A.P., Boland, D., Reynolds, C.C.O., Gouge, B., Apte, J.S., Rogak, S.N. and Kandlikar, M. (2012). Modeling
air pollutant emissions from Indian auto-rickshaws : Model development and implications for fleet emission
rate estimates. Atmospheric Environment, 50, 148–156.
Guttikunda, S.K., Goel, R. and Pant, P. (2014). Nature of air pollution , emission sources and management in the Indian
cities. Atmospheric Environment, 95, 501–510.
India has no plans to have an all electric car fleet by 2030: Govt. (2017, December 22). Livemint.
Kumar, A.G., Anmol, M. and Akhil, V.S. (2015). A strategy to Enhance Electric Vehicle Penetration Level in India.
Procedia Technology, 21, 552–559.
livemint. Retrieved from https://www.livemint.com/
Maini, C.K. (2005). REVA Electric car : a case study of innovation at RECC. International Journal of Technology
Management, 32(1/2), 199–212.
Majumdar, D. and Kumar, B. (2014). Study on possible economic and environmental impacts of electric vehicle
infrastructure in public road transport in Kolkata. Clean Technologies and Environmental Policy, 17(4),
1093–1101.
Press Information Bureau Government of India. Retrieved from http://pib.nic.in/index.aspx
Sabapathy, A. (2008). Air quality outcomes of fuel quality and vehicular technology improvements in Bangalore city ,
India. Transportation Research Part D, 13(7), 449–454.
Saxena, S., Gopal, A. and Phadke, A. (2014). Electrical consumption of two- , three- and four-wheel light-duty electric
vehicles in India. Applied Energy, 115, 582–590.
Times of India. Retrieved from https://timesofindia.indiatimes.com/
Wesseling, J.H., Farla, J.C.M. and Hekkert, M.P. (2015). Exploring car manufacturers ’ responses to technology-forcing
regulation: The case of California ’ s ZEV mandate. Environmental Innovation and Societal Transitions, 16,
87–105.
Wesseling, J.H., Farla, J.C.M., Sperling, D. and Hekkert, M.P. (2014). Car manufacturers’ changing political strategies
on the ZEV mandate. Transportation Research Part D, 33, 196–209.
Wesseling, J.H., Niesten, E.M.M.I., Faber, J. and Hekkert, M.P. (2015). Business Strategies of Incumbents in the Market
for Electric Vehicles: Opportunities and Incentives for Sustainable Innovation. Business Strategy and the
Environment, 24, 518–531.
Kegomoditswe Ntwagae
University of Johannesburg, Faculty of Engineering and
the Built Environment, South Africa
E-mail: kegofreda.ntwagae@gmail.com
Arnesh Telukdarie
University of Johannesburg, Faculty of Engineering and
the Built Environment, South Africa
E-mail: arnesht@uj.ac.za
Pavitra Dhamija
University of Johannesburg, Faculty of Engineering and
the Built Environment, South Africa
E-mail:dhamijaresearch@gmail.com
Abstract
Enterprise resource planning (ERP) system is defined as a set of integrated software modules and a central database
that enable businesses to manage the efficient and effective use of resources such as materials, human resources,
and finances. ERP systems achieve this by automating and incorporating business processes and data sharing
through the organisation and enabling access of information in a real-time environment. These systems mitigate
the complexity and the scale of the system implementation process which can result in failures and implementation
difficulties. An Information System (IS) is included as a component of an ERP system designed to provide useful
information that supports business strategy, business operations, business management analysis and decision
making functions. The main purpose of this study focuses on the challenges that occur prior to and post the ERP
implementation process in manufacturing organizations over a period of time. The present study adopts a Systematic
Literature Review (SLR) approach to gain a comprehensive view of the various research methods and finding,
evaluating and synthesizing research. The findings for the present study reveals the lack of various elements that
includes top management support, clear vision and goals, organizational culture and user training, departmental
collaboration, re-alignment of strategy, project management. It also confirms the high customization of ERP system,
incorrect selection of ERP vendor, and poor planning. This paper provides an in depth understanding with respect
to ERP systems. It improves business processes including marketing plans and product development decisions.
The ERP system proves coordination in the organization, reduced inventory costs, improved customer satisfaction,
planning and inventory management and improved efficiency.
Keywords: Enterprise Resource Planning, Information System, Information Technology, Enterprise Information
System, Research and Development
1. Introduction
Enterprise Resource Planning (ERP) form an integral part of a company’s Information Systems (IS)
because it improves the functions of business processes through integration (Matende and Ogao,
2013). These include the handling of large volumes of data, solving complex problems and offering
high quality products. ERP systems are designed to provide useful information that supports the
strategy, operations and decision making functions of an entire organisation (Matende and Ogao,
2013). An IS consists of a set of interconnected components that collect, disseminate information
and provide feedback on objectives (Mushavhanamadi and Mbohwa, 2013). It is the link between
technology, people and processes. A typical ERP project is made up of three phases namely:
the pre-implementation phase, the implementation phase and the post implementation phase.
According to Ahmadi et al., (2015) the pre-implementation phase includes planning the project
and selecting an ERP system. The implementation phase refers to the deployment and use of the
system and the post implementation phase refers to the enhancement and maintenance of the ERP
system. The implementation phase comprises the deployment and use of the system, whereas post-
implementation ascertains the enhancement and maintenance of the ERP system. An ERP software
package offers customers a variety of modules that enable organisational learning; improve supply
chain performance; reduce production and financial costs; increase revenue; improve information
response time; as well as, ensure improvement in the planning and forecasting of production.
2. Review of literature
ERP systems were developed as material resource planning (MRP) systems that metamorphosed
into an advanced system over the years (Unterkalmsteiner et al., 2012). ERP advanced enormously
because it is used to efficiently and effectively improve the functions and operations of organisations
in today’s market (De Loo et al., 2013). Boland (2017) traced the history of ERP which dated
back from the 1960s, and confirmed that the ERP software was used to assist organisations with
the production process, which resulted in the product of MRP. Nofal and Yusof (2013) mentioned
.important considerations before implementing ERP system i.e. (i) that the organisation in
question understands system quality, (ii) Full preparation of the ERP deployment process. To
minimise complications during the post implementation process in the organisation, the client
and ERP vendor must have a clear understanding of set strategic goals. ERP was derived from
MRP since the 1970s and MRP II since the 1980s (Acar et al., 2017). With various business
processes MRP and MRP II assist many organisations with linking different forms of information
in specific business contexts such as manufacturing. The design of an ERP system supports both
the functional and operational processes of the business’s value chain (Ahmadi et al., 2015). The
functional modules of an ERP system include accounting and finance and HR which support
practical processes of a business’s value. The operational modules of an ERP system include
supply chain, customer and sales modules which support operational processes of a business’s
value chain. ERP implementation goals differ from one business to another. Many organisations
implement ERP systems because of its integration and standardisation capabilities, flexible
server architecture and its ability to drive effective business re-engineering and management of
core and support processes. An ERP system mitigates the complexity and scale of the system
implementation process, which causes failure, and implementation challenges (Acar et al., 2017).
Poor project planning can result in an increase in in the cost of the implementation of an ERP
system depending on the size of the organisation and the volume of data that needs to be migrated
from the legacy system to a new system.
3. Research Methodology
This study approach includes a bibliographic research review, specifically utilising internet based
search engines. Bibliographic research investigates historical and scientific text by studying textual
content of any volume (Garratt et al., 2002). A Systematic Literature Review (SLR) was adopted to
obtain data from multiple sources with the aim to producing consistent conclusions. The SLR was
conducted to identify various fields of knowledge in ERP. The area of ERP is a multidisciplinary
field of study as it consists of functional and technical knowledge. The SLR is conducted by using
Unterkalmsteiner (2012) guidelines. An SLR is a literature review intended to find, evaluate and
synthesize secondary data available to a specific research question (Boland et al., 2017). The purpose
of an SLR is to provide a full overview of research conducted in a specific field.
11 9 6 4 4 0 34
The inclusion criteria include the primary studies related to ERP systems and ERP implementation;
papers that contain at least two keywords; primary studies related to the developed themes of the
paper; studies conducted in the relevant industry and research papers in English and available in full
text. The exclusion criteria exclude the papers that contain at most one keyword; duplicate paper
of similar research study; research papers not related to the research questions and are not written
in English and primary studies that do not adhere to the themes of the paper. The search process
obtained 42 publications. After applying the exclusion criteria, a total of 34 papers are included as
shown in Table 2 and Figure 2. Figure 2 demonstrates the percentage rate of included journal paper publications.
WILEY Online 9%
SpringerLink 3%
MIS Quarterly 9%
behaviour towards change management, new information system, and technological advancements
makes the ERP implementation process difficult. This result in financial losses project schedule
overruns and user dissatisfaction of the new ERP system.
Challenges related to information technology infrastructure during and post the ERP
implementation phase occur because of poor ERP system implementation. Major complications
can occur if the ERP system is not implemented correctly into proper hardware, telecommunication
equipment and a functioning operating system. IT competence in an organisation affects the financial
performance of the organisation.
Replacing a legacy system with a new ERP system is a challenging task for any organisation. In-
house IT competence is required to provide support to the end-user and to maintain the new system.
The organisation and IT should work together to solve end-user problems with the system and to
encourage user involvement on the system. Poor in-house competence has a negative influence on
the system, and the overall performance and productivity of the organisation as a whole.
Management of change in an organisation is expensive and inevitable however taking necessary
steps to prepare for the change is important. Preparing for the change creates a positive impact in the
organisation for the long run. A great amount of effort must be made by the organisation to prepare
employees for change well in advance. This requires consistent communication with employees and
providing training where necessary.
Continuous improvement involves system maintenance on a regular, which involves the process of
adding and removing certain functions on the system. ERP systems continue to evolve and change
after the ERP system go-live. It is important for the organisation to ensure that ERP goes through
operational, tactical and strategic optimization to avoid system failure.
Organisational support affects end-user structure, roles and responsibility in an organisation.
Lack of continuous improvement on the ERP system post the implementation phase prohibits
organizational support. Poor Organisational support results in a decrease in employee commitment
and job satisfaction in the organisation.
The misuse of new management (ERP Integration) control functionality creates wrong and
misguiding decisions. This promotes a distressing level of complexity which can cause challenges
during and post the ERP implementation phase.
Poor strategic objectives and lack of shared vision from top management causes challenges before
the implementation project is initiated. This creates uncertainty in the organisation because employees
are not sure of roles and responsibilities. This results in a demotivated and unproductive workforce.
It is important for top management to prepare employees for a major change in an organisation by
ensuring that goals and objective are clearly defined and understood. Clear objectives and shared
vision circumvents misunderstandings, unnecessary conflict, mistrust, confusion, demotivation and
poor performance.
Organisational readiness involves aligning ERP implementation goals with organisational goals,
conducting an ERP implementation feasibility study and preparing well defined project plans. The
level of an organisations understanding of system quality within its organisation determines the level
of organisational readiness to handle the system and the changes it brings.
Technical and system quality is compromised when the system is not well designed. Poor system quality
perceived strategic value, information quality, technical quality and organisational implementation of the
ERP system. Poor system quality reduces user interaction and reduces user satisfaction.
The ERP system and effectiveness must fit the requirements of the business and its existing
processes. Administrative processes of the organisation need to be accurately integrated with the
new ERP system to maximize performance, growth and development. Failure to effectively align
system and business processes to the new ERP system will result in the incorrect construct of an
ERP system.
IAMOT 2019 | 840
A Review of Best Practices for Enterprise Enablement
Online support consists of the availability of end-user training manuals, tutorials and system
guidelines on ERP that provides added learning support, providing users with the opportunity to
acquire knowledge at a comfortable pace. This increases user involvement and user satisfaction.
User satisfaction provides a negative or positive feedback on the ERP system, which enables
organisations to identify necessary opportunities for improvement. A lower level of user satisfaction
reduces system interaction, growth, knowledge and organisational learning.
High customization of the ERP system can result in post implementation challenges because the
greater the scope of the project the greater the risk to failure. Customizations are difficult to manage
and can cause major project budget and schedule overruns. Customization causes more problems
post the ERP implementation phase because of the upgrades that need to be done on the system and
maintenance costs.
RQ 2: What do manufacturing organisations intend to achieve with an ERP system?
Improved Information Flow: ERP implementation is aimed at organizing and allowing better information
access across all departments. An ERP system is implemented across manufacturing organisations because
it provides sophisticated workflow functionality; manages documentation and content.
Improved Communication: ERP systems help with managing shared goals by making it possible
for the ERP modules to integrate with inventory control, accounting and finance, manufacturing and
distribution. The ERP system enables manufacturing organisations to streamline business processes
in aim to have a unified set of software applications across all departments.
Competitive Advantage: Manufacturing organisations implement ERP to reduce costs, and ensure
productivity in order to remain competitive within the marketplace. ERP assists in strengthening
supplier and customer relationships because the system allows for efficient and effective processing
of payment, inventory forecasts, inventory optimization, warehousing and tracking of final products.
Financial Gain: ERP improves the financial performance or profitability of the manufacturing
organisation by improving stock returns, organizational control over budget costs and improves
return on investment and return on assets.
Efficiency: ERP automates processes, improves efficiency in factories, measures the productivity
and performance of machinery, stabilizes processes and reduces process cycle time. ERP enables
manufacturing organisations to address complex problems, offers product variety, improves the
reliability of decision-making, progresses and monitors inventory management.
Supplier Relationship: ERP increases collaboration between suppliers, customers and partners.
It provides opportunity for growth in relevant industry markets. ERP encourages organizational
learning, increases the competencies of users and ensures improved supply chain performance.
RQ3: What are the key constrains in ERP implementation?
An ERP system provides a united IT architecture to enhance data consistency and integration in
modular applications that support business processes. Manufacturing organisations use ERP systems
to achieve cost performance in areas of marketing, manufacturing, purchasing, inventory and customer
service through improved process efficiencies and waste reductions. An ERP system helps identify
product defects and service failure, enabling organisations to provide good and quality executions.
It improves business processes including marketing plans and product development decisions. The
ERP system proves coordination in the organisation, reduced inventory costs, improved customer
satisfaction, planning and inventory management and improved efficiency.
4. Conclusion
In conducting the bibliographic review, various ERP challenges were identified. These challenges
were identified as: inadequate top management support and involvement, high customization, poor
strategic objectives, user resistance behaviour, low user satisfaction, improper ERP vendor selection,
inadequate user training and involvement, project management, poor interdepartmental collaboration
and communication, poor system and business effectiveness, lack of continuous improvement,
insufficient organisational support, low organisational readiness, poor in-house competence,
information technology infrastructure, ERP integration, lack of online support, destitute system and
technical quality, and change management.
References
Acar, M.F., Tarim, M., Zaim, H., Zaim, S. and Delen, D., (2017). Knowledge management and ERP: Complementary or
contradictory, International Journal of Information Management, 37(6), 703-712.
Ahmadi, S., Papageorgiou, E., Yeh, C.H. and Martin, R., (2015), Managing readiness-relevant activities for the
organizational dimension of ERP implementation, Computers in Industry, 68, 89-104.
Boland, A., Cherry, G. and Dickson, R. eds., (2017), Doing a systematic review: A student’s guide. Sage.
De Loo, I., Bots, J., Louwrink, E., Meeuwsen, D., van Moorsel, P. and Rozel, C., (2013), The effects of ERP-
implementations on the non-financial performance of small and medium-sized enterprises in the Netherlands,
Electronic Journal of Information Systems Evaluation, 16(2).
Garratt, A., Schmidt, L., Mackintosh, A. and Fitzpatrick, R., (2002), Quality of life measurement: bibliographic study of
patient assessed health outcome measures. Bmj, 324(7351), 1417.
Matende, S. and Ogao, P., (2013), Enterprise resource planning (ERP) system implementation: a case for user
participation. Procedia Technology, 9, 518-526.
Mushavhanamadi, K. and Mbohwa, C., (2013), The impact of enterprise resource planning system (ERP) in a South
African company.
Nofal, M.I. and Yusof, Z.M., (2013), Integration of business intelligence and enterprise resource planning within
organizations, Procedia Technology, 11, 658-665.
Unterkalmsteiner, M., Gorschek, T., Islam, A.M., Cheng, C.K., Permadi, R.B. and Feldt, R., (2012), Evaluation and
measurement of software process improvement—a systematic literature review, IEEE Transactions on
Software Engineering, 38(2), 398-424.
Mohamed Azzam
Federation of Egyptian Chambers of Commerce
Digital Economy and Technology General Division
4 El Falaki Square, Cairo, Egypt
E-mail: mo.azzam@nu.edu.eg
Nezar Sami
Nile University
Sheikh Zayed City, Giza, Egypt
E-mail: nsami@nu.edu.eg
Tarek Khalil
Nile University
Sheikh Zayed, Giza, Egypt
E-mail: tkhalil@nu.edu.eg
Abstract
Introduction and Purpose: Digital transformation has been a “buzz” word over the last few years. Government
of Egypt has initiated various ambitious initiatives and projects for transforming the economy into digital
economy. Since the outlook of the future organizations would be different from what we know today, therefore,
such transformation mandates radical change in the way public leaders manage their organizations, operations and
workforce. Consequently, there is a necessity for foreseeing the drivers of change, as well as the technological
evolution, which are shaping the future. Foreseeing and understanding the drivers of change would be the path for
survival and thrift. Based on that, the paper outlines the major trends shaping the future of public organizations
in the digital transformation era, as well as establishes a roadmap for such organizations for having a smooth
restructuring and transformation, in order to be ready for the future.
Methodology: The approach used in the paper is based on thorough analysis of the reports issued by international
institutions, organization development (OD), and literature in the areas of future governments and digital
transformation, desk research, and interviews with key personnel in the government and Business Representative
Organizations (BROs).
Findings: The paper identifies the drivers and trends shaping the future of public organizations, and outlines
framework and system model for the productive future public organizations, as well as summarizes the
characteristics of such organizations.
Contributions: The proposed framework will act as a guiding instrument for policymakers and public leaders
for planning and executing effective and efficient transformation of the public organizations in the digital
transformation era. Also, the paper can be used as a base for future research in specific issues related to the digital
transformation of the nation.
Keywords: Management of Technology, Digital Transformation, Future Organization, Future Workforce,
Innovation, Future Leaders
1. Introduction
Forever, future starts now! There is an unprecedented pace of technological advancement, coupled
with disruptive use models of technology in every aspect of life and business (Mohamed Azzam
et al., 2018). This reshapes or even disrupt our present and future.
We are living in the era of “Uncertainty”. Therefore, there is a necessity for governments and
businesses to foresee the drivers of change shaping the future, as this becomes the route for survival
and thrift (Gould-Davies, 2017).
Consequently, understanding the effect of the emerging technologies is principle in this regards, as
they will unquestionably rewrite the outlook of the future. Emerging technologies will revolutionize
the way we live and conduct business in the future.
A recent survey by The Brookings Institution indicated that around 30% of adult internet users
believe the U.S. government should establish a federal commission for regulating the development
and use of robots. The survey also showed that 52% of these internet users see robots will progress,
over the coming 30 years, to the level that they will execute most of the activities conducted by
humans today (Wes, 2018).
Furthermore, on the organizational level, and as a result of this technological progression, there is
an increasing divide between the sophistication of technology and its innovative use models, and
the efficiency and effectiveness of business outcome. Consequently, this leads to income inequity
and stagnation, and social instability (J. Bersin, B. Pelster, J. Schwartz and B. van der Vyver, 2017).
Therefore, organizations, especially public organizations, are challenged to make a major
transformation on different levels related to workforce, working environment and the nature of work.
Based on that, the paper outlines the major drivers and trends shaping the future of public organizations
in the digital transformation era, as well as establishes a roadmap for such organizations for having
a smooth restructuring and transformation, in order to be ready for the future.
Furthermore, the size of data and its diversity, due to the human practices and the operated systems,
forms another major change driver (A. Church and S. Dutta, 2013).
Another driver stems from changing generational structures and demographics, along with the
shifting expectancies that are forming the outlook of the future workforce (J. Deal and A. Levenson,
2016).
These major drivers are affecting or even forming the base of the trends shaping the future of
organizations, as it is illustrated in the following figure (Figure 1) and will be elaborated in the next
section.
Source: Adapted from Four Trends Shaping the Future of Organizations and Organization Development, 2017
The objective of such platform organizations are to make sure that their employees are utilizing the
collaboration tools to the maximum magnitude, having better understanding of the new nature of
work and business dynamics, making faster decisions away from rigid hierarchy, using information
and data intelligently, and involving their customers massively (A. Church and W. Burke, 2017).
Public organizations will have to follow the same path in the near future too! They need to be
responsive to the future! Public leaders should promote more utilization of technology and advanced
analytic tools, across all functions within the public organizations. This is for discovering new
venues that would help achieving economic value, while improving the productivity, agility and
transparency climate within the public organizations (DigitalBCG, 2018).
(A. Church and W. Burke, 2017). Insights from such massive data are becoming more significant for
decision-making process within the platform organizations.
Big data analytics should give insights to decision makers across the different functions of the
organization. Such insights should meet the business and corporate strategies of the organization.
Consequently, the role of data scientists along with chief technology officer (CTO) is becoming
fundamental within the new organizations (Richard Guzzo et al., 2015). They need to integrate and
organize the fragmented data from all over the organization, to develop innovative solutions and
frameworks based on insights for the top management.
This is for making a rapid and progressive transformation to the future. They also need to inaugurate
such culture and philosophy across the organization’s management and employees, for lessening the
resistance of change. Yet, this is not a stress-free task, as there is scarcity of talents in the analysis
and insight area of expertise (A. Shull et al., 2014).
Forever, human factor and competency is a fundamental component for any organization that
requires to continue to exist and then flourish (Kaufman, 2015).
Last but not least, the control plane will contain the analysis of the data produced from every
single point within the system to help decision-makers to have the big picture in mind and take
corrective and/or progressive actions, when necessary. This plate also include monitoring the level
of adherence of the delivery of the services and offerings as per their predefined SLA, while taking
into consideration the feedback of the different stakeholders that include citizens, businesses, other
governmental authorities, and Business Representative Organizations (BROs) and NGOs, as well
as the collective intelligence data gathered internally and externally. This is for keeping the system
agile, and be able to keep abreast of the change in the internal and external environment of the
organization, as well as to be always ready for the future.
This leads us to define the main characteristics of the future public organization, as will be elaborated
in the following section.
5. Conclusion
Bringing our public organizations to the future would need both agile and digital public leaders.
They are the building block for transforming their organizations. However, this is not an easy task
as it sounds.
Such leaders should be capable of listening more than giving directive orders. They should be
capable of establishing an ecosystem based on trust and openness. They should be believers in
transparency and accountability, as well as in collaborative efforts rather than individualism.
They should know that job description is a history and the concept of “just filling positions” by
average individuals would not be valid anymore. They should hire and retain talents, while developing
their skills towards building a pipeline of future leaders. They should revamp their operations and
transform their classical hierarchical organizations to wirearchy organizations.
Innovations should be appreciated on all levels. Leaders of organizations should build the culture
and mindset of entrepreneurship and intrapreneurship across the organization.
Such leaders should strive to make their organizations’ functions and subunits digitally competent.
They do not have to know how technology works, but they should know how technology and its use
models provide business value to their beneficiaries and stakeholders. It is all about building digital
culture within the organization. That is why having principles of management of technology in the
mind of the public leaders is vital.
It behooves future public organizations and their leaders to learn the lessons from Uber and Airbnb
and quickly adopt to provide the services needed and deserved to its stakeholders.
References
A. Church and S. Dutta. (2013). The promise of big data for OD: Old wine in new bottles or the next generation of data-
driven methods for change? OD Practitioner Vol. 45 No. 4.
A. Church, C. Rotolo, N. Ginther and R. Levine. (2015). How are top companies designing and managing their high-
potential programs? Consulting Psychology Journal: Practice and Research Vol. 67 No. 1.
A. Church and W. Burke. (2017). Four Trends Shaping the Future of Organizations and Organization Development. OD
PRACTITIONER Vol. 49 No. 3.
A. Shull et al. (2014). Something old, something new: Research findings on the practice and values of OD. OD
Practitioner Vol. 46 No. 4.
Betz, F. (2008). Road to Competitive Strategy. National Science Foundation (NSF).
Brown, T. (2008). Design thinking. Harvard Business Review.
C. Granda Tandazo, F. Paladines Galarza and A. Velásquez Benavides. (2016). Digital strategic communication in
Ecuador‟s public organisations. Current state and future. Revista Latina de Comunicación Social Vol. 71.
C. Rawlings and R. Bencini. (2014). What Does Moore’s Law mean for the rest of society? Futurist Vol. 48 No. 4.
Cheung-Judge, M.-Y. (2017). Future of Organizations and Implications for OD Practitioners. OD Practitioner Vol. 49
No. 1.
DigitalBCG. (2018). The Digital Future Is Now. BCG.
Domnica, D. (2012). The role of leadership in identifying the premises of the future organization. REVISTA ACADEMIEI
FORTELOR TERESTRE Vol. 2 No. 66.
Dreamgrow. (2018, August 17). Top 15 Most Popular Social Networking Sites and Apps. Retrieved from https://www.
dreamgrow.com/top-15-most-popular-social-networking-sites/
E. Michaels, H. Handfield-Jones and B. Axelrod. (2001). The War for Talent. Harvard Business School.
G. Kane et al. (2016). Digitally savvy executives are already aligning their people, processes, and culture to achieve
their organizations’ long-term digital success. MIT Sloan Management Review and Deloitte.
Gould-Davies, N. (2017). Seeing the future: power, prediction and organization in an age of uncertainty. International
Affairs Oxford University.
Gulati, R. (2009). Reorganize for Resilience: Putting Customers at the Center of Your Organization. Harvard.
H. Bakhshi, J. M. Downing, M. A. Osborne and P. Schneider. (2017). The Future of Skills: Employment in 2030. Pearson
and Nesta.
Husband, J. (2018). Sketches for the Future of Work.
J. Bersin, B. Pelster, J. Schwartz and B. van der Vyver. (2017). Global Human Capital Trends: Rewriting the rules for
the digital age. Deloitte University Press.
J. Boudreau, R. Jesuthasan and D. Creelman. (2015). Lead the Work: Navigating a World Beyond Employment. John
Wiley & Sons.
J. Deal and A. Levenson. (2016). What Millennials Want from Work: How to Maximize Engagement in Today’s
Workforce. McGraw Hill.
Kaufman, R. (2015). Individual Training, Performance Improvement, and the Future for Organizations. Educational
Technology Vol. 55 No. 6.
KMPG. (2018). Rise of the humans 3: Shaping the workforce. KMPG.
L. Golay and A. Church. (2013). Mass customization: The bane of OD or the cure to what ails it? Leadership and
Organization Development Journal Vol. 34 No. 7.
M. Alves, S. Galina and S. Dobeli. (2018). Literature on organizational innovation: past and future. Innovation &
Management Review Vol. 15 No. 1.
M. Grebe, M. Rüßmann, M. Leyh and M. Franke. (2018). Digital Maturity Is Paying Off. BCG.
M. Guthridge and A. Komm. (2008). Why multinationals struggle to manage talent. McKinsey Quarterly.
M. Wilkesmann and U. Wilkesmann. (2018). Industry 4.0 – organizing routines or innovations? VINE Journal of
Information and Knowledge Management Systems Vol. 48 No. 2.
Mohamed Azzam et al. (2018). THE JOURNEY TO EGYPT’S DIGITAL TRANSFORMATION. International
Association for Management of Technology (IAMOT). Birmingham UK.
OECD/Eurostat. (2018). Oslo Manual: Guidelines for Collecting, Reporting and Using Data on Innovation. OECD
Publishing.
Örtenblad, A. (2018). What does “learning organization” mean? The Learning Organization, Vol. 25 No. 3.
PWC. (2014). Workforce of the future: The competing forces shaping 2030. PWC.
R. Silzer et al. (2010). Identifying and assessing high potential talent: Current organizational practices. In R. Silzer & B.
E. Dowell (Eds.). Strategy-Driven talent management: A leadership imperative.
Reichert, T. (2018). How to Drive a Digital Transformation. DigitalBCG.
Richard Guzzo et al. (2015). Big Data Recommendations for Industrial–Organizational Psychology. Industrial and
Organizational Psychology Vol. 4 No. 4.
S. Beechler and I. C. Woodward. (2009). The global “war for talent”. Journal of International Management Vol. 15.
U. Plesner, L. Justesen and C. Glerup. (2018). The transformation of work in digitized public sector organizations.
Journal of Organizational Change Management.
W. Burke and G. Litwin. (1992). A causal model of organizational performance and change. Journal of Management
Vol. 18 No. 3.
Wes, D. (2018). PUBLIC OPINION SURVEYS ON AI AND EMERGING TECHNOLOGIES. The Brookings Institution.
Gita Surie
Adelphi University, US
E-mail: surie@adelphi.edu
Abstract
Purpose of the Paper
This paper examines the role of national innovation systems (NISs) in developing countries in stimulating inclusive
growth, a key need of the 21st century, as large segments of the population in these countries do not have access to
basic services and resources and do not participate in markets.
Related Work
This paper draws on key research on national innovation systems (Lundvall, 2016; 2010; 2007; Nelson, 1993),
institutions and entrepreneurship (North, 1991; Baumol, 2007), sustainability (UN, 2015) and inclusive growth
(Calton et al., 2013; London and Anupindi, 2012; Hahn, 2009; London and Hart, 2004).
Design/ Methodology/ Approach
The paper studies how NISs can achieve inclusive growth in emerging economies. It applies relevant theoretical
research and literature in the areas noted above to develop a framework for sustainability and inclusive growth. A
case study approach is used; the framework is used to examine the case of India and case examples from renewable
energy are provided to support the framework.
Findings
Findings suggest that introducing and implementing new policies, and institutional collaboration, are required
for inclusive growth. Cases from the renewable energy sector in India suggest that inclusive growth requires the
involvement of various actors in the national innovation system. It also suggests that entrepreneurial efforts must be
nurtured.
Research Limitations/ Implications
A limitation is that the paper focuses on cases from one developing economy: India. However, similar conditions in
other developing economies suggest that findings are applicable in other settings.
Practical Implications
The findings can be used to modify policies to forge new ways to collaborate across different actors, and modify
institutions to support collaboration. Learning how to adapt institutions is critical for solving endemic socio-
economic problems at the bottom of the pyramid and promoting inclusive growth. Lessons learned can be applied to
other developing countries or to nurture new markets in industrialized countries.
Originality/ Value of the Paper
The paper contributes to theory by combining several theoretical approaches to answer the understudied question of
how national innovation systems can promote inclusive growth. It also considers inclusive growth as an important
factor in enhancing the competitiveness of NISs.
Keywords: National Innovation Systems, Inclusive Growth, Institutions, Sustainability, India
1. Introduction
Increasing concern about the environment, and challenges such as rapid depletion of natural
resources, air pollution, greenhouse gas emissions, extreme events, insufficient access to energy and
water in developing economies, have led to a focus on sustainability (Markard, Raven and Truffer,
2012). The UN’s (2015) Sustainable Development Goals (SDGs) include providing affordable clean
energy, promoting sustainable consumption and production, conserving terrestrial ecosystems and
ensuring work and growth. However, globally, 1.06 billion people lack electricity and 3 billion
people do not have access to clean cooking fuel (United Nations, 2017). Total domestic material
consumption increased from 48.7 billion tons to 71.0 billion tons over 2000-2010. However, GDP
growth rates did not meet targets in developed and developing countries over the period 2010-2015.
Additionally, land productivity decline and biodiversity loss continue (United Nations, 2017).
Increasing integration of global markets due to the digital revolution has reduced poverty in some
developing economies but those lacking skills to participate in the global economy have been left
behind. Also, although growth reduced poverty in East Asia, the Pacific and South Asia, inequality
worsened (Aoyagi and Ganelli, 2015). Consequently, governments in emerging economies must
strengthen policies to achieve growth together with greater shared prosperity.
National innovation systems (NISs) are increasingly important as innovation is viewed as critical
to competitiveness. Moreover, heightened global competition has highlighted different national
strategies in both developing and industrialized countries to enhance competitiveness (Lundvall,
2007; Nelson, 1993). To this end, governments in emerging economies (such as India and
China) seek to upgrade technological and organizational capabilities (Fan, 2011; 2014), promote
competitiveness (Baumol, 2002) and ensure inclusion. Hence, directing attention to NISs is critical.
Over the past decade, China, India and Brazil have increased investments in renewable energy to
improve energy self-reliance, reduce environmental degradation and contribute to sustainability
through new capability development with the hope of attaining leadership in the renewable energy
sector (REN21, 2017). Moreover, increases in per capita consumption of energy in emerging
economies have made renewable energy particularly relevant. Also, innovation to convert waste
and residues into energy and upcycle products to increase profitability is appealing (Scheel, 2016;
MITSloan & BCG, 2013; McDonough and Braungart, 2010).
This paper examines the role of National Innovation Systems (NISs) in developing countries in
stimulating sustainability and inclusive growth. It draws on key research on NISs (Lundvall, 2016;
2010; 2007; Nelson, 1993), ecological theories (Chertow, 2001; Holling, 1996), institutional theories
(North, 1991), literature on sustainability (UN, 2015) and bottom of the pyramid (Calton et al., 2013;
London and Anupindi, 2012; Hahn, 2009; London and Hart, 2004) to provide a framework for
sustainability and inclusive growth in developing countries. The framework is applied to the case of
India and case examples from renewable energy are provided to support the framework.
2. Theoretical Background
differences in competence and economic resources (Lundvall, 1985). Additionally, loss of national
leadership can result from reduced innovation due to lack of institutional innovation and institutional
linkages (Lundvall, 2016; Freeman, 2010). Research on institutions (North, 1991, Acemoglu and
Robinson; 2008; Acemoglu and Johnson, 2005) highlights the importance of informal constraints
and formal rules (such as property rights institutions and contracting institutions) in explaining
variations in economic performance across countries as corroborated by Watts and Woodruff (2017)
in their comparison of agricultural performance in the USA and India. Additionally, Greif and
Mokyr (2017) suggest that cognitive rules are important for changing institutions.
Although the internationalization of NISs lags multinational internationalization (Carlsson, 2006),
government policies are a channel through which NISs interact mutually. Governments often
emulate each other’s innovation policies (Mowery, 2011); an example is the creation of “science
parks”, and “business incubators” near universities, and other such links between academia and
industry. Additionally, laws such as the Bayh-Dohl Act of 1980 aimed at improving university-
industry relations and technology transfer in the US NIS (Mowery, 2011) have also been emulated
by other countries. Other strategies include focusing on how developing country firms’ activities can
be upgraded, how value is distributed along the value chain and national differences in organizing
work across different NISs (Lundvall, 2016).
It is well known that the proper allocation of resources to entrepreneurship which brings new
ideas and combinations is critical for innovation, competitiveness and economic development
(Schumpeter, 1934; Kirzner, 1973; Baumol, 1990; Boettke and Piano, 2016). In the absence of
appropriate incentives, entrepreneurial activity by individuals may not be forthcoming. Indeed,
entrepreneurship is required for commercializing inventions as invention alone is insufficient.
Even in industrialized economies, it is acknowledged that government plays an important role in
facilitating the establishment of entrepreneurial firms. Hence, institutional support is necessary for
promoting entrepreneurship. Klein et al. (2010) note that productive public entrepreneurship includes
alteration to the rules of the game, creation of new public organizations, innovative management of
public resources and spillovers from private actors to the public domain. Additionally, privately
undertaken entrepreneurship in pursuit of private interests may have beneficial spillover effects on
the public domain. Thus, a public entrepreneur may be either a private or a public actor. Baumol
et al. (2007) suggest that a combination of big firm capitalism and entrepreneurial capitalism is
the most beneficial for economic performance. A substantial body of research on entrepreneurship
increasingly recognizes that venture creation and small business development are ways to improve
economic growth via the creation of new product markets, jobs and wealth (Ahlstrom and Ding,
2014; Audretsch et al., 2006).
The primary beneficiaries of globalization are globally competitive and digitally connected firms
and industries with requisite skills to participate. Additionally, high levels of inequality within
nations can effectively create mobility barriers for individuals who are unable to participate in the
market economy for a variety of reasons including lack of capabilities, access to resources, social
capital and networks (Sachs, 2008). Hence, a key concern of developing country governments is
to ensure social inclusion, particularly via promotion of new industries aimed at the bottom of
the pyramid (Prahalad, 2012). Most developing economy governments therefore view supporting
entrepreneurship and innovation as critical to enhancing competitiveness.
Additionally, social entrepreneurship, a type of entrepreneurship that focuses on solving socio-
economic problems at the bottom of the pyramid is an important mechanism for linking bottom of
the pyramid populations with more advanced sectors of the economy. Such linkages enable the flow
of resources, ideas, capital and talent to facilitate the development of new markets, a key function
of NISs (Surie, 2017).
Most studies of NISs have focused on industrialized countries, with a few exceptions (Godinho and
Ferreira, 2012), while developing countries are under-represented. Although differences between
industrialized and developing economies (particularly China), have eroded over the past three
decades, the latter having caught up in terms of conventional economic measures of development,
there are still a large number of people in developing economies without access to resources. This
indicates that further research on NIS adaptation is necessary to ensure inclusive growth. Therefore,
it is imperative to study institutions relevant for accelerating innovation, especially at the bottom of
the pyramid (BOP; Prahalad, 2012).
than others (for example, the higher castes, Muslims, other religious minorities and the scheduled
tribes) whereas for the scheduled castes poverty declined at lower rates. Additionally, self-employed
non-farm workers saw a reduction in poverty at a much higher rate than self-employed farmers,
non-farm and farm wage labour. In the urban areas, poverty declined fastest for regular salaried
households. They conclude that broad-based pro-poor policies need to be supplemented with policies
for specific groups to ensure inclusive growth.
Supporting the idea that equality is not detrimental to growth at the micro level is the literature on
Bottom of the Pyramid markets (BOP) and pro-poor innovation (Prahalad, 2012). BOP markets
consist of over four billion people who live on less than $2/day and represent multiple cultures,
ethnicity, literacy, capabilities and needs and can be segmented in various ways. Prahalad (2012)
argues that converting these fragmented markets to an organized private sector market (worth about
$5 trillion in purchasing power parity) is an important challenge and opportunity to create new
markets. These markets exist in rural and urban settings and access to the market is a major problem
in places like India and Brazil. Commitment to building awareness of products and services, ensuring
affordability, access, and availability are critical for innovation at the bottom of the pyramid.
Products and services must be designed for local markets with deep immersion into consumers’
lives to obtain insights (Prahalad, 2012). Additionally, to scale innovations, global standards must
be met. Solutions are likely to be specific to different locations and industries and new ecosystems
specific to markets can be created to economize on capital requirements. Profitability depends
on large volume, low capital intensity, low margin per unit and high return on capital employed.
Consequently, Prahalad (2012) argues that business model innovation is critical.
2.3. Sustainability
Discussion of the concept of sustainability dates back to Malthus and was addressed extensively
in the 1970s literature on exhaustible resources. The Brundtland report (1987) defined sustainable
development as “…development that meets the needs of the present without compromising
the ability of future generations to meet their own needs” (WCED 1987). Thus, sustainable
development is economic development that lasts (Pearce and Atkinson, 1993b), narrowly defined as
real Gross Domestic Product per capita or broadened to include indicators of development such as
education, health, “quality of life” including human freedom (e.g. the United Nations Development
Programme’s Human Development Index (HDI); (UNDP, 1992)). It is continuously rising, or non-
declining consumption per capita or whatever indicator is used to measure development (Pearce
and Atkinson, 1993b). Pearce and Atkinson’s (1993a; 1993b) measure of sustainability includes (a)
strong sustainability, which requires conservation of all exhaustible and renewable resources and
does not accept substitutability among different assets; (b) weak sustainability, which requires that
the overall stock of capital must not decline. Weak sustainability includes substitution of natural
capital with man-made capital so that the constant capital rule is satisfied (Pearce and Atkinson,
1993b).
While the early literature on sustainability focused on analysing the specific environmental innovation
processes (Van Den Bergh et al., 2011) the technological innovation systems approach considers the
whole range of relevant actors including governments, non-governmental organizations (NGOS),
research institutes as well as institutions relevant for innovation success (Edquist, 2005) and has also
included entire production and consumption systems (Tukker et al., 2008) which must be reorganized
to yield more sustainable economic structures (Truffer and Coenen, 2012). More recently, attention
has been focused on how to transition from a historically predominant socio-technical regime to a
new socio-technical regime by nurturing and developing niches which allow the new socio-technical
regime to mature (Markard et al., 2012; Geels and Schot, 2007). The niche is a critical concept due
to its role in the emergence of novel technologies; niches are protected spaces, i.e. specific markets
or application domains in which radical innovations can develop without being selected out by
the pressures of the prevailing regime (Markard et al., 2012). The transition can be deliberate and
intended and achieved through a broad range of actors. Thus analytical interest has shifted from
technological innovation contributing to economic growth of countries to new technologies as nuclei
for enabling socio-technical transitions (Markard et al., 2012).
Additionally, the industrial ecosystems literature emphasizes technology and suggests that wastes
and effluents from one process serve as the input material for processes as in natural ecological
systems (Dunn and Steinemann, 1998). Thus, by increasing business competitiveness, reducing
waste and pollution, creating jobs and improving working conditions, such industrial ecosystems
can stimulate regional development (Gibbs et al., 2008). In this vein, Koh et al. (2017) propose a
circular framework for supply chain resource sustainability (SCRS) that takes into account the triple
bottom line (Besiou and Van Wassenhove, 2015). Koh et al. (2017) view SCRS in terms of streams
of resources including carbon and other emission related resources, energy resources, material, and
social resources. They suggest various strategies for ensuring sustainability including life-cycle
mapping and utilization of resources, capture and quantification of environmental, economic and
social capital, and identification and management of interconnectedness and overlaps in resources
cycles.
3. Methods
Case study methodology is used to examine the research question: How can rural renewable energy
systems promote environmental and socio-economic sustainability? Case study methodology
is useful and appropriate when asking how or why questions and when the phenomenon is rare,
unique or critical for theory creation (Yin, 2009 [2003]). New theory is developed by extending
existing theory (Lee, 1999) by linking the literatures on sustainability with industrial ecosystems and
renewable energy. Inductive case analysis is used to provide rich context and helps to understand
how a renewable energy ecosystem can be designed for sustainability. Finally, the methodology
helps to make concepts and processes concrete (Eisenhardt and Graebner, 2007).
The case findings reported in this paper were drawn from interviews conducted as part of my Fulbright
research study on the commercialization and adoption of renewable energy by base of the pyramid
consumers (2013-2014). The paper also draws from a larger on-going study from 2009-2011 on
commercialization processes for emerging “green technologies” in India. Interviews were conducted
in public and private sector organizations and interviewees included government officials, scientists,
university researchers, CEOs of firms and non-governmental organizations (NGOs) serving Bottom
of the Pyramid (BOP) consumers in the renewable energy sector (Yin, 2009 [2003]). These data
were supplemented by site visits, presentations, annual reports and other published material.
The Indian context is an appropriate setting to study renewable energy industrial ecosystem
creation in rural India for sustainability. New policies on renewables were enacted with a focus
on new energy technologies to alleviate poverty and facilitate social inclusion of the rural poor,
a central element in renewable energy programs. These included the Jawaharlal Nehru National
Solar Mission (2010) focused on accelerating the adoption and diffusion of solar energy and which
facilitated the development of one of the largest generation based markets in the world (Yenneti,
2016). Additionally, the government also focused on off-grid solar energy projects and introduced
various schemes to provide electricity and other energy services to rural areas lacking these services.
Similarly, the National Policy on Biofuels (GOI, 2009) aimed at biofuel production in India, focused
on using non-food feed-stocks raised on degraded land for biofuel production. The government also
made use of rural employment schemes to facilitate feedstock production and processing for the
nascent biofuels sector (GOI, 2009).
Interviews were transcribed and the data were analyzed by using categorization and pattern-matching
techniques as indicated by Yin (2009 [2003]), Miles and Huberman (1994), Eisenhardt (1989). First
the literature on NISs and institutions, sustainability, industrial ecosystems and renewable energy
was studied. Propositions were developed by iterating from theory to data and vice versa and pattern
matching was used in conjunction with theories noted above as recommended by Yin (2009 [2003]).
These analyses and propositions yielded a conceptual model for niche creation at the bottom of the
pyramid that takes into account environmental and socio-economic sustainability. The conceptual
framework is outlined in the next section.
literature on sustainability transitions explicitly notes that technological and other innovation is
increasingly being viewed as a way to catalyze socio-technical change (Markard et al., 2012). The
lack of products and services targeted at base of the pyramid populations presents an opportunity to
establish new markets (a function of NISs) and to scale them eventually to address needs in other,
similar global markets. Moreover, research also notes the importance of promoting entrepreneurship
to enable the adoption and diffusion of innovations (Surie, 2017). Entrepreneurship diffusion at the
base of the pyramid allows greater participation of the target population in rural and semi-urban
areas where cash and the means to earn it are in short supply. Thus, at the national level, NISs must
facilitate the emergence of entrepreneurship, especially entrepreneurship focused at the bottom of
the pyramid (BOP) to enable the emergence of new niches.
At the macro level, government policies can address the challenge of promoting BOP innovation.
These include an explicit policy focus on inclusion and sustainability through various missions and
different agencies. New policies targeted at BOP populations can alter the trajectory of the innovation
system over time. Additionally, the government can use agencies such as public academic institutions
to implement policies to obtain first-hand knowledge of the needs of the target population and ensure
that they are being addressed. For example, academia can focus on demonstration projects for new
technologies. Also, specific national agencies can sponsor innovation projects and provide grants to
reduce the risk of investing in technologies for BOP populations. Special benefits to entrepreneurs
and small business owners can facilitate entrepreneurship. Such efforts will foster the emergence
and diffusion of entrepreneurship.
At the micro level, entrepreneurs must focus on building awareness, and making their products
and services affordable, accessible and available when addressing BOP markets (Prahalad, 2012).
Moreover, environmental sustainability can be built into the system to ensure that products and
services are sustainable, particularly as reducing waste and re-using waste outputs as inputs over the
life cycle can help to reduce cost (Pierie et al., 2016).
Developing low-cost business models is critical as affordability is of utmost importance for BOP
markets. Often new infrastructure to reach the target population must be built, so relationships with
new constituencies must be created. For example, many low cost innovations in the new digital
economy include users as part of the process, as for example, in the hospitality industry (Sigala,
2014) or include sharing resources (e.g. Uber, Lyft, AirBnb). Thus, strategies such as sharing
resources, reducing waste and reusing outputs as inputs can be used to develop frugal innovations
that provide value to BOP populations. Scaling them will require embedding quality standards and
processes to ensure reliability and continuous availability of the product/service.
Figure 1: A Framework for NIS Institutional Change to Enable Niche Creation at the Bottom of the Pyramid
5. Findings
The framework presented is applied to provide insights on the creation of niches for innovative,
technology-based sustainable products and services in India.
saving about 40% of fuelwood, mitigating 2.5 tons of CO2 emission/annum/panel. The technology
was demonstrated successfully in Himachal Pradesh and extended to the cold desert area in Zanskar
Valley, Ladakh region of Jammu and Kashmir (DST, 2018).
NB Institute of Rural Technology (NBIRT), a Core Support Group working in the state of West
Tripura made innovative S&T interventions for lighting using a photo voltaic (PV) integrated
Micro Solar Dome to provide lighting where conventional power is not available or unreliable. The
integrated PV module charges a battery during daytime and provides light at night for about 4 hours.
NBIRT also developed a solar power operated micro pump and water purification system to provide
water for drinking and sanitation. A CSG in Hyderabad developed an improved Solar Cabinet Dryer
integrating solar energy to dry and process locally grown and easily available ingredients.
Besides supporting technology development for rural areas, DST also inspires young S&T
professionals to identify social challenges and provide S&T solutions via its Scheme for Young
Scientists and Technologists. In 2017-2018 around 45 projects were recommended for support. DST
also supports technology development in the areas of agriculture, health and nutrition for the non-
farm sector. These S&T interventions target natural resources, skills and traditional crafts to generate
livelihoods in 60 villages in the state of Uttarakhand through support provided to the Uttarakhand
State Council of Science and Technology. DST also supports capacity building at the local level by
building and strengthening local institutions in most project sites and by disseminating new skills.
Program interventions have led to livelihood diversification in many areas (DST 2018).
Other examples include Mini Wind*1, a wind energy company catering to the underserved in rural
areas. The company meets the power needs in villages by training, supplying and supporting rural
mechanics to build, install and maintain low-cost wind turbines. Mini Wind produces turbines
designed to operate efficiently at lower wind-speeds common in most regions.
Another enterprise serving the rural poor, Solar Lighting India2, provided solar lighting systems
for BOP customers in villages that lack or have limited access to the grid. Realizing that obtaining
financing is hard for the poor because they have no credit history, despite their willingness to pay
for products, the founder CEO built small-scale solar lighting systems. He also worked with rural
banks to create affordable “lease-to-own” schemes to make capital-intensive PV systems affordable,
thereby facilitating financial inclusion of the rural poor.
A third start-up, Flora Green3, collects flower waste from temples and mosques for processing into
natural products such as incense, bio-fertilizer and bio-degradable Styrofoam to reduce pollution
and pesticide discharge. The company has pioneered flower-cycling to process waste flowers and
applied for five patents.
were reluctant to finance the BOP population without collateral or credit history, Solar Lighting,
together with its NGO partner, provided a loan guaranty on behalf of borrowers, thus enabling
BOP consumers to obtain financing. As a result of these loans, rural customers were included in the
financial system which would not have happened had they been connected to the grid, leading the
CEO to claim that solar energy should be looked upon as an engine of development.
Additionally, the CEO of Solar Lighting noted that, just like consumers in urban markets, the rural
poor also deserve servicing and maintenance for systems they purchase. Therefore, energy service
centres are an important part of the organizational structure. The company also included sales of fuel-
efficient cook stoves using biomass as fuel and charcoal briquettes to its product portfolio to leverage
its distribution network. In 2014, the company had 36 offices, 278 employees and been profitable
for the past 10 years. Moreover, the CEO emphasized that besides solar energy technologies, the
customers needed complementary innovations. For example, the sewing machine used by a poor
tailor must be re-invented to meet the needs of this population because the current machine assumes
the existence of power supply from the grid. However, power supplied by the grid is often non-
existent or limited. Thus, lack of innovation for BOP populations creates inefficiencies that can be
mitigated by distributed energy systems. He also noted that he was developing management from
the bottom-up, and had trained and developed people who could reach the rural poor even if they
were not highly educated.
Livelihood generation is a key goal of Flora Green. The company converts flower waste from
temples into incense and other product including bio-degradable packaging and bio-leathers.
Besides preventing pollution of the Ganges, the organization provides opportunities for women’s
employment and empowerment. Women who previously worked as janitors instead process flowers
into incense sticks and other natural products. Innovations includes using creating a value chain
based on flower waste that employs poor women in urban and semi-urban areas to process the
flowers and create high quality organic products. Products are marketed online and via dealers
to consumers in urban areas. The business model is an example of a company creating a circular
economy in which waste is converted into new products.
6.1. Limitations
A limitation of this paper is that it focuses only on one developing economy, India. However, similar
conditions exist in other countries, suggesting it is applicable to other settings. Other developing
countries have attempted to create niches to achieve sustainability and social inclusion. For example,
ITAIPU in Brazil has created an ecosystem for various technologies based on renewable energy to
initiate new industries such as solar battery powered automobiles, bio-gas production from waste,
and create livelihood generation opportunities for artisanal organizations.
References
Acemoglu, D., Robinson, J.A.,(2008), Persistence of Power, Elites, and Institutions. The American Economic Review,
98(1), 267-293.
Acemoglu, D., Johnson, S., (2005), Unbundling Institutions. Journal of Political Economy, 113 ( 5), 949-995.
Ahlstrom, D., Ding, Z., (2014), Entrepreneurship in China: An overview. International Small Business Journal, 32, 6,
610-618.
Aoyagi, C., Ganelli, G., (2015), Asia’s quest for inclusive growth revisited. Journal of Asian Economics, 40, 29-46.
Audretsch, D.B., Keilbach, M.C., Lehman, E.E.,(2006), Entrepreneurship and Economic Growth. New York: Oxford
University Press.
Baumol, William J., (2002), The Free-market Innovation Machine: Analyzing the Growth Miracle of Capitalism.
Princeton, New Jersey: Princeton University Press.
Baumol, W.J.,(1990), Entrepreneurship: Productive, Unproductive, and Destructive. Journal of Political Economy, 98
(5), Part 1, 893-921.
Baumol, W.J., Litan, R. E., Schramm, C.J.,(2007), Good Capitalism, Bad Capitalism, and the Economics of Growth and
Prosperity. New Haven and London: Yale University Press.
Berg, A.G., Ostry, J. D., (2011), Equality and Efficiency Is there a trade-off between the two or do they go hand in hand?
Finance and Development, 48, 3, 12-15.
Besiou, M., Van Wassenhove, L.N., (2015), Addressing the challenge of modeling for decision-making in social
responsible operations., Production and Operations Management, 24, 9, 1290-1401.
Boettke, P.J. Piano, E., (2016), Baumol’s productive and unproductive entrepreneurship after 25 years. Journal of
Entrepreneurship and Public Policy, 5, 2, 130-144.
Calton, Jerry M., Werhane, Patricia H., Hartman, Laura P. and Bevan, D. (2013), Building Partnerships to Create Social and
Economic Value at the Base of the Global Development Pyramid. Journal of Business Ethics, 117 (4), 721-733.
Chertow, M. R. (2001), The IPAT Equation and its Variants. Journal of Industrial Ecology, 4 (4), 13-29.
Dacin, P.A., Dacin, M.T, Matear, M., (2010), Social entrepreneurship: Why we don’t need a new theory and how we
move forward from here. Academy of Management Perspectives, August, 37-57.
Department of Science and Technology (2018), Annual Report 2017-2018. Department of Science and Technology,
Government of India. https://drive.google.com/file/d/1IPKUdbSx0Da2Zi_ufzC4u-T3jCFzPred/view [July
18, 2018].
Dunn, B.C., Steinemann, A.,(1998), Industrial ecology for sustainable communities. Journal of Environmental Planning
and Management, 41, 661-672.
Edquist, C., (2005), Systems of innovations: Perspectives and Challenges, In Oxford Handbook of Innovation, Fagerberg,
J., Mowery, D.C., Nelson, R.R. (Eds.), pp. 181-208. Oxford: Oxford University Press.
Eisenhardt, K.M.,(1989), Building theories from case study research. Academy of Management Review, 14 (4),
532–550.
Eisenhardt, K.M., Graebner, M.E., (2007), Theory building from cases: opportunities and challenges. Academy of
Management Journal, 50 (1), 25–32.
Fan, P., (2011), Innovation capacity and economic development: China and India. Economic Change and Restructuring,
44 (1-2), 49-73.
Fan, P., (2014), Innovation in China. Journal of Economic Surveys, 28 (4), 725–745.
Freeman, C., (2010), Formal Scientific and Technical Institutions in the National System of Innovation. In National
Systems of Innovation: Toward a Theory of Innovation and Interactive Learning, Lundvall, Bengte-Ake
(Ed.), London, UK: Anthem Press.
Freeman, C., (1982),Technological infrastructure and international competitiveness, Draft paper submitted to the OECD
Ad hoc group on Science, technology and competitiveness, August 1982, mimeo; later published as Freeman,
C., (2004), Technological infrastructure and international competitiveness, Industrial and Corporate Change,
13, 540-52.
Geels, F. W., Schot, J., (2007), Typology of sociotechnical transition pathways. Research Policy, 36, 399-417.
Gibbs, D., Deutz, P., Proctor, A., (2005), Industrial ecology and eco-industrial development: a potential paradigm for
local and regional development? Regional Studies, 39, 171-183.
Godinho, M.M., Ferreira, V., (2012), Analyzing the evidence of an IPR take-off in China and India. Research Policy,
41, 3, 499-511.
Government of India, (2018), Key Highlights of NITI Aayog’s Occasional Paper on Elimiinating Poverty: Creating
Jobs and Strengthening Social Programs. NITI Aayog, Government of India.https://www.niti.gov.in/
writereaddata/files/Summary_eliminating_poverty.pdf [29 November, 2018].
Greif, A. and Mokyr, J., (2017), Cognitive rules, institutions, and economic growth: Douglass North and beyond. Journal
of Institutional Economics, 13 (1), 25–52.
Hahn, R., (2009), The Ethical Rational of Business for the Poor - Integrating the Concepts Bottom of the Pyramid,
Sustainable Development, and Corporate Citizenship. Journal of Business Ethics, 84, (3), 313-324.
Heal, G.,(2011), Sustainability and its Measurement. NBER Working Paper Series, # 17008, Cambridge MA: National
Bureau of Economic Research. http://www.nber.org/papers/w17008. [15 October, 2017]
Hekkart, M.P., Suurs, R.A.A., Negro, S.O., Kuhlmann, S., Smits, R.E.H.M., (2007), Functions of innovation systems:
A new approach for analyzing technological change. Technological Forecasting and Social Change, 74,
412-432.
Holland, John H. and Miller, J.H., (1991), Artificial adaptive agents in economic theory. American Economic Review,
Papers and Proceedings, 81, 365-370.
Holling, C.S., (1996), Engineering resilience versus ecological resilience. In Engineering within ecological constraints,
Schulze P.C. (ed.), Washington DC: National Academy Press.
Iansiti, M. and Richards, G.L.,(2006), The information technology ecosystem: Structure, health and performance, The
Antitrust Bulletin, 51 (1), 77-110.
Kirzner, I.M., (1973), Competition and Entrepreneurship. Chicago, IL: University of Chicago Press.
Klein, P.G., Mahoney, J.T., McGahan, A.M., Pitelis, C.N., (2010), Toward a theory of public entrepreneurship. European
Management Review, 7, 1 -15.
Koh, S.C. L., Gunasekaran, A., Morris, J.,,Obayi, R., Ebrahimi, S.M., (2017), Conceptualizing a circular framework of
supply chain resource sustainability. International Journal of Operations and Production Management, 37,
10, 1520-1540.
Kwon, S., Motohashi, K., (2017), How institutional arrangements in the National Innovation System affect industrial
competitiveness: A study of Japan and the U.S. with multi-agent simulation. Technological Forecasting and
Social Change, 115, 221-235.
Lee, W.B., (1999), Using Qualitative Methods to Organize Research. Newbury Park, CA: Sage Publications.
London, T., Hart, S. L., (2004), Reinventing Strategies for Emerging Markets: Beyond the Transnational Model. Journal
of International Business Studies, 35 ( 5), 350-370.
London, Ted, Anupindi, R., (2012), Using the base-of-the-pyramid perspective to catalyze interdependence-based
collaborations. In Proc Natl Acad Sci U S A, 109 (31), 12338-12343.
Lundvall, B., (2016), NISs and Globalization. in The Learning Economy and the Economics of Hope, London, UK:
Anthem Press.
Lundvall, B., (ed.) (2010), National Systems of Innovation: Toward a Theory of Innovation and Interactive Learning,
London, UK: Anthem Press.
Lundvall, B., (2007), NISs – Analytical Concept and Development Tool. Industry and Innovation, 14 (1), 95-119.
Lundvall, B., (1985), Product Innovation and User-Producer Interaction. Aalborg, Denmark: Aalborg University Press.
Markard, J., Raven, R., Truffer, B., (2012), Sustainability transitions: An emerging field of research and its prospects,
Research Policy, 41, 955-967.
McDonough, W., Braungart, M., (2002), Cradle to Cradle: Remaking the way we make things. New York: Farrar, Straus
and Giroux.
McDonough, W., Braungart, M., (2010), Upcycling: Beyond Sustainability. New York: North Point Press.
Miles, M.B., Huberman, A.M., (1994), Qualitative Data Analysis. Newbury Park, CA: Sage Publications.
MITSloan & BCG., (2013), The Innovation Bottom Line. In Research Report Winter 2013, MITSloan Management
Review and The Boston Consulting Group (BCG), Boston, MA. https://www.bcg.com/documents/
file126806.pdf [23 October, 2017]
Miyazaki, K., Islam, N., (2007), Nanotechnology systems of innovation - An Analysis of industry and academia research
activities. Technovation, 27, 661-675.
Mowery, David C., (2011), Learning from one another? International policy “emulation” and university-industry
technology transfer, Industrial and Corporate Change, 20 (6), 1827-1853.
Nelson, R. R., (1993), National Innovation Systems, New York: Oxford University Press.
North, D., (1991), Institutions. Journal of Economic Perspectives, 5 (1), 97-112.
OECD, (2014), Focus on Inequality and Growth – December 2014. https://www.oecd.org/social/Focus-Inequality-and-
Growth-2014.pdf [29 November, 2018].
Okun, A.M., (1975), Equality and efficiency: The big trade-off. Washington: Brookings Institution Press.
Ostry, J.D., Berg, A., Tsangarides, C.G., (2014), Redistribution, Inequality and Growth. International Monetary Fund
Staff Discussion Note, Washington, D.C.: International Monetary Fund.
Pearce, D.W. and Atkinson, G., (1993a), Capital Theory and Measurement of Sustainable Development: An Indicator of
Weak Sustainability. Ecological Economics, 8, 103-108.
Pearce, D.W., Atkinson, G., (1993b), Measuring sustainable development. Ecodecision, 9, 64-66.
Pierie, F., Bekkering, J., Benders, R.M.J., van Gemert, W.J.Th., Moll, H.C., (2016), A new approach for measuring the
environmental sustainability of renewable energy production systems: Focused on the modelling of green
gas production pathways. Applied Energy, 162, 131-138.
Prahalad, C.K., (2012), Bottom of the Pyramid as a source of breakthrough innovations. Journal of Production and
Innovation Management, 29 (1), 6-12.
REN21, (2017), Renewables 2017: Global Status Report. http://www.ren21.net/wp-content/uploads/2017/06/17-8399_
GSR_2017_Full_Report_0621_Opt.pdf [29 November, 2018]
Ruhl, J.B., Kraft, Steve E., Lant, Christopher L., (2007), The law and policy of ecosystem services. Washington D.C.:
Island Press, pp. 13-35.
Sachs, J. D., (2008), Common Wealth: Economics for a Crowded Planet. New York: The Penguin Press.
Schumpeter, J.A., (1934), The Theory of Economic Development: An Inquiry into Profits, Capital, Credit, Interest, and
the Business Cycle. Cambridge, MA: Harvard University Press.
Sen, K.,(2014), Inclusive growth: When may we expect it? When may we not? Asian Development Review, 31 (1),
136-162.
Sigala, M., (2014), Customer involvement in sustainable supply chain management: A research framework and
implications in Tourism. Cornell Hospitality Quarterly, 55 (1), 76-88.
Surie, G., (2017), Creating the innovation ecosystem for renewable energy via social entrepreneurship: Insights from
India. Technological Forecasting and Social Change, 121,184–195.
Terrapon-Pfaff, J., Dienst, C., König, J., Ortiz, W., (2014), A cross-sectional review: Impacts and sustainability of
small-scale renewable energy projects in developing countries. Renewable and Sustainable Energy Reviews,
40, 1-10.
Thorat, S., Dubey, A., (2012), Has growth been socially inclusive during 1993-1994 – 2009-10? Economic and Political
Weekly, 47 (10), 43-53.
Truffer, B., Coenen, L., (2012), Environmental Innovation and Sustainability Transitions in Regional Studies. Regional
Studies, 46 (1), 1-21.
Tukker, A., Charter, M., Vezzoli, C., Sto E., Andersen, MM., (2008), System Innovation for Sustainability. Perspectives
on Radical Changes to Sustainable Consumption and Production. Sheffield: Greenleaf.
United Nations, (2017), Sustainable Development Knowledge Platform. https://sustainabledevelopment.un.org/ [10
August, 2017].
United Nations, (2015), Sustainable Development Goals. https://www.un.org/sustainabledevelopment/sustainable-
development-goals/. [26 July, 2018].
Van Den Bergh, J.M., Truffer, B. and Kallis, G., (2011), An introduction to environmental innovation and societal
transitions. Environmental Innovation and Societal Transitions, 1, 1-23.
Watts, T., Woodruff, M., (2017), Institutional inefficiency: small farms starve India’s economy. Journal of
Entrepreneurship and Public Policy, 6 (2), 206-223.
World Bank,(2010), The Changing Wealth of Nations: Measuring Sustainable Development in the new Millenium.
Washington, D.C.: World Bank.
WCED, (1987), Our common future. Report of the World Commission on Environment and Development, New York:
United Nations.
Yenneti, K., (2016), The grid-connected solar energy in India: Structures and challenges. Energy Strategy Reviews,
11–12, 41-51.
Yin, R.K., (2009 [2003]), Case Study Research: Design and Methods. Fourth ed., Thousand Oaks, CA: Sage.
Bernd P. Platzek
FOM University of Applied Sciences, Study Centre Munich, Germany
E-mail: bernd.platzek@fom.de
Leon Pretorius
University of Pretoria, South Africa
E-mail: leon.pretorius@up.ac.za
Abstract
In this research we investigate the role of innovation and entrepreneurship as well as entrepreneurial communities in
the process of economic growth and development. Current research on development issues strongly focus either on
the micro level or the macro level of national economies disregarding the holistic nature of economic development.
Entrepreneurial communities represent a conceptual link between the macro perspective on economic development
and the micro perspective on entrepreneurial initiatives as a tipping point for economic development. In this paper
we present a theoretical construct of entrepreneurial communities. Additionally, we introduce a qualitative model
of vital entrepreneurial economies following a holistic perspective on development issues. The theoretical analysis
is based on systems thinking and systems approaches to management. Structures of entrepreneurial communities
and networking between regional communities will be explored and reflected in a theoretical exploration. The
introduced theoretical construct of an entrepreneurial community is based on living systems theory. The qualitative
systems model of the vital entrepreneurial economy is deduced from a word model.
Keywords: Entrepreneurship, Entrepreneurial Community, Systems Perspective, Economic Development, Vital
Entrepreneurial Economy
financial systems) as relevant for economic development (Wagner et al., 1989; Davids, 2014).
The many theoretical concepts establish that the development process of an economy should be
recognized as a multi-level phenomenon. Consequently, problems in economic development can
have various possible causes.
Schumpeter (1912: 463-548) differentiates between processes of development and adaptation. In
traditional economic theory the central point is the quest for an equilibrium (focus: efficiency) and
the recovery of the equilibrium after economic crises (focus: adaptation). In a dynamic economic
theory, innovation is the issue at stake (focus: process of creative destruction). In the process of
adaptation, the driving forces lie outside the economic system (e.g. new technology, growth of
population, cultural changes). Economic development from inside the economic system is triggered
by entrepreneurship (Schumpeter, 1912: 469-492).
According to Schumpeter (1912: 464-466) the two perspectives in economic development (adaptation
and development) are intertwined. Events in the economic cycle (improving efficiency, adaptation
processes) and events in economic development (innovation processes) shape a macroeconomic
duality. Therefore, entrepreneurial initiatives to identify and pursue business opportunities are of
key importance in the endogenous triggered process of economic development (Witt, 1987: 41).
Entrepreneurial experiments, learning, and adaptation shape an evolutionary process of economic
development (Nelson and Winter, 1982). In this process entrepreneurship is continuously generating
further entrepreneurship. Thus, a dynamic economic development occurs (Metcalfe, 2005: 48-
49). Coordination and transformation are connecting impulse on the demand side and decentral
interaction with innovation processes and change at the macro level (Dosi et al., 2017; Robert
et al., 2017). Consistent with Davids (2014), interactions at the personal level, local knowledge,
and social learning are important drivers for economic development. At the organizational level
the management function with focus on efficiency and adaptation should be complemented by an
entrepreneurial function with focus on innovation (Baumol, 1968; Platzek et al., 2014).
Consequently, for a holistic understanding of economic development, it is useful to consider
entrepreneurial interactions at different levels of the system (Miller, 1995; Haines, 1998) to align
personal, organizational, and social goals (see Figure 1).
The relationship between the market system and the political system play cpmplimentary roles
in the development process. As stated by Baumol et al. (2007), there are four basic archetypal
designs for national system: (1) state directed market economy, (2) oligarchic dominated market
economy, (3) market economy dominated by big firms, and (4) innovative market economy. The
different archetypes require different development strategies and face different challenges. In all
four archetypes entrepreneurship is the driving force behind economic development.
As stated by Mazzucato (2015) the symbiotic relationship between companies and the state
is an important source for innovation-driven economic development. The state has to act in an
entrepreneurial way and should take risks the private sector could not take over. The government
should develop and shape new markets via public investments, innovation policy, and public
venture capital. With entrepreneurial strategies at the macroeconomic level the state can induce
technological and economic progress. Further, economic policy has to direct demand and industrial
development.
Myrdal (1974) describes economic development as an upwards or downwards directed process in the
various regions of the economy. Some regions have advantages as a result of natural characteristics
and historic chances. These advantages can be strengthened by trade and industrialization processes,
qualified workers, modern infrastructure, and entrepreneurship (Myrdal, 1974: 37-40). Consequently,
the movement of production factors, labour and capital, as well as the trade in goods and services
bring unequal development to different regions of the economy. Regions with substantial economic
growth attracts motivated workforce from stagnating or backwards developing regions. As stated
by Myrdal (1974), economic policy can moderate these effects to achieve a balanced economic
development of the whole economy: upcoming regions can benefit from upwards directed processes,
and in declining regions upwards directed processes can be stimulated by economic policy.
The starting point for endogenous impulses for economic development in regions and economies is
entrepreneurial initiative at the micro level. Entrepreneurial actors collect and exploit information
from both isolated and regional networks. Companies use new knowledge from local interaction and
collective learning processes for innovation. Therefore, the local networks are important components
of economic development as well as offering the companies in the entrepreneurial community
agglomeration advantages from local division of labour, information sharing, knowledge creation
and technology transfer. Each reactive or proactive company adaptation effects on the one hand
the regional economic development, and on the other hand the regional milieu that represents the
context for entrepreneurial activities (Baldegger and Julien, 2011).
So far, this discussion has identified entrepreneurial actors as a focal point for development processes
starting at the micro level. The coordination in market systems is directed by the price mechanism,
networks, and market-oriented discovery processes. Different economic systems require different
varieties of entrepreneurship to trigger the development process. The impulse to make adaptations
in the economic cycle and entrepreneurial initiatives renew the economic system (we could call it
“Schumpeterian dynamics”).
The entrepreneurial state offers appropriate infrastructure, takes care of the necessary public goods to
serve the collective needs, and is a risk-taker, initiating social and technological developments. Public
authority directed processes (e.g. to develop new markets), as well as self-organized market-driven
processes in entrepreneurial communities, create agglomeration advantages and synergistic effects.
As a result, dynamic development processes occur at the organizational, community, and national
levels. To achieve a sustainable economic development in the whole economy, the entrepreneurial
state moderates and promotes appropriate cumulative processes in and between entrepreneurial
communities (we could call it “Myrdal-Moderation”). In that process the entrepreneurial state uses
upwards directed forces and positive diffusion effects and has to moderate the downwards directed
forces and negative effects of networks (Munshi, 2014).
Against this background the following section considers historic development processes as part
of the exploratory research approach. This allows a better understanding of the imperative role
of entrepreneurship and regional entrepreneurial communities in the dynamic development of the
economy and its regions.
important driver for development processes in the several development stages. However, in today’s
business arena, countries and regions have to compete with other mature and dynamic economies
and communities to achieve economic development (Knox and Marston, 2007: 271-273).
Ehrlich (1990) describes three aspects to explain the different development stages of national
economies and regions. The central influences on the endogenous growth and development process
are (1) uneven number and quality of human resources, (2) differences in entrepreneurship and
market dynamics triggering technological change, (3) various political concepts to encorage
development initiative. As a result, different levels of economic development occur, and information
and knowledge can be seen as important lever to stimulate economic progress.
The success of knowledge based entrepreneurial activities depends on firm-specific competences
and country-specific advantages (e.g. level of education, state-of-the-art of science and technology,
quality of institutions, political and social conditions). Therefore, the locational choice of
companies depends on the local conditions as determinants of agglomeration advantages and firm-
specific competitive advantages (Porter, 1990). Entrepreneurial organizations identify and pursue
opportunities in interaction with specific regional networks. Consequently, entrepreneurship,
competitiveness, and adaptability determine the viability of the vital entrepreneurial learning
organization (Platzek et al., 2014).
However, entrepreneurial organizations use regional networks and collective learning in the
process of entrepreneurial gathering of information and knowledge. Further, valuable impulse from
interaction and co-evolution in the entrepreneurial community direct decisions in the entrepreneurial
shaping of the future. To pursue entrepreneurial initiatives, entrepreneurial organizations employ
synergies in the local networks in the entrepreneurial shaping of the organization.
New jobs in fast-growing small and medium sized organizations support economic development
(Drucker, 1985: 21-44; Carree and Thurik, 2013). Therefore, Drucker (1985) claims for the
development of an entrepreneurial society. Entrepreneurial economies cultivate flexibility, life-
long learning and the ability to change at all levels of the national economy. As stated by Drucker
(1985: 355-372), market-driven actors in the vital entrepreneurial economy have to develop
an entrepreneurial orientation as well as the entrepreneurial state has to create non-bureaucratic
framework conditions and appropriate taxation and financial systems.
Inside the organization and inside the entrepreneurial community it is possible to activate creative
collective processes and to develop common mental models about the markets and opportunities
by balancing inquiry and advocacy (Senge, 2003). Scharmer (2009) describes a mental process to
use on individual and collective sensing to identify future-oriented opportunities (Scharmer, 2009).
The cooperation in entrepreneurial communities permits a dynamic sharing of information and
knowledge as well as the realisation of individual and common entrepreneurial initiatives.
According to Kirzner (1997), economic development is driven by an entrepreneurial discovery process.
Specific knowledge of entrepreneurial actors can stimulate a dynamic economic development. As
stated by Hayek (1945), every entrepreneurial actor holds valuable specific information which
can be used in entrepreneurial initiatives. Entrepreneurial actors collect and interpret information
together and derive entrepreneurial activities in a specific context. In that process, the individual,
specific, and unique knowledge of the entrepreneurial actors is not accessible to everyone. Creative
entrepreneurs pursue uncertain entrepreneurial activities, and generate dynamic markets and
spontaneous order (Huerta de Soto, 2008).
The entrepreneurial activities create information, entrepreneurial knowledge and new opportunities.
Therefore, dynamic markets have two functions: coordination at present and initiation of future-
directed creative activities (Huerta de Soto, 2009). Hence, entrepreneurship leads to effective
coordination in imperfect markets (Kirzner, 1997), the execution of risky entrepreneurial initiatives
(Knight, 1921), and a dynamic economic development (Schumpeter, 1912) in the entrepreneurial
community as well as in other linked communities of the economy. Economic development and
an improved standard of living is, therefore, the result of an evolutionary process in complex and
adaptable networks with ongoing entrepreneurial activities and interactions to share information and
knowledge (Beinhocker, 2007; Huerta de Soto, 2008).
As stated by Krugman (1996), the decentral impulse to the development process are superior to
central directed regulation at the macro level. The decentral entrepreneurial actors possess specific
knowledge about the markets and the local circumstances. Political agents can hardly have such deep
insights. However, at the macroeconomic level it is necessary to moderate the local developments.
Therefore, there is a need for complex regulation at the macro level to direct the development impulse
from entrepreneurship and entrepreneurial communities in favour of the economy as a whole.
The national and regional innovation system has to thus focus on the accumulation of knowledge
and the integration of industry with research and educational institutions (Freeman, 1995).
Complementary public and private efforts in research, as well as interconnected research-based
companies in exchange with a local market base, allow interactive learning processes and economic
development in the entrepreneurial community. So, local development processes and market-driven
discovery processes create a vital entrepreneurial economy. At the same time, an entrepreneurial
state moderates the economic development via political regulation at the macro level.
The development of the local communities and the innovation systems follow a historic process,
based on the systemic interaction of technology, institutions, and companies (Groenewegen and
Steen, 2006). Entrepreneurial actors are integrated in institutional arrangements (e.g. contracts,
organizations, networks), formal institutions (e.g. state and political system, public administration,
legal system) and informal institutions (culture, values, norms, technology). A holistic configuration
of the national and regional institutions in line with the stages of development can be the result of
experimentation and learning in the process of development. The focus of the following exploratory
section is on the entrepreneurial organizations and the entrepreneurial communities as initiators of
development processes in the vital entrepreneurial economy.
Cluster dynamics produce a self-energizing development process (see Figure 2): (1) New companies
(Start-up Entrepreneurship) use products and services from established companies; (2) Established
companies (Corporate Entrepreneurship) use products and services of new companies; (3) New
companies arise out of established companies (Spin-off Entrepreneurship); (4) New infrastructure
and demand-effects triggered by additional actors in the region go along with a sequence of new
entrepreneurial activities (Profit & Social Entrepreneurship); (5) Dynamic organizations and
industries generate a spiral of regional development (Myrdal, 1974; Cusmano et al., 2015).
Creativity is a key driver for deploying knowledge in producing goods and services (Florida, 2002:
44-56). At the same time, entrepreneurship as a concept for creating and implementing new ideas
based on knowledge and other production factors (e. g. capital, natural resources, labour) needs a
social structure: networks of research and development, venture capital, modular production systems,
openness for technological, economic, cultural, and artificial creativity. However, creative clusters
offer organizations a vital environment and attract creative and entrepreneurial talent (Florida, 2002:
283-297).
A successful regional development can be achieved with different structural archetypes (He and
Chen, 2016). Thus, the cluster focus can be on foreign direct investments versus cluster focus
on technology-based start-up organizations versus cluster focus on spin-off organizations versus
cluster focus on non-technology start-up organizations. Consequently, successful clusters have
specific configurations and success factors to create a local innovation system. Also, entrepreneurial
communities foster dynamic development in parallel with individual and social objectives (Lundvall,
1999: 61-68).
Along with Knox and Marston (2007), the challenges in vital entrepreneurial economies are (see
Figure 3): (1) Fostering the emergence of new dynamic cluster; (2) Using positive spiral effects in
dynamic cluster and at the same time controlling expanding effects; (3) Revitalisation of mature
cluster; (4) Creating spiral effects in weak cluster in the outskirts; (5) Linking the cluster with other
national and global clusters with a holistic perspective.
The analysis so far outlines the relevance of entrepreneurship and cross-linked entrepreneurial
communities for economic development. Creativity and entrepreneurship deploy information and
knowledge in a specific cluster structure, linked to other regional communities. The following
exploration describes aspects of coordination and cooperation in entrepreneurial communities.
The founding of a new company out of an established company is an important driving force in
entrepreneurial communities (Cusmano et al., 2015). Though, networking and synergies between
spin-off companies and established companies are based on local institutions, cultural relatedness,
common values, and cooperative relations. Spin-off companies stay in the entrepreneurial
community and get cost-efficient entry to specialised markets and services. So, informal knowledge
transfer, common learning, and the local technology base can be used for entrepreneurial initiatives.
Local relations facilitate a network-based organization of production (Foster, 2005). Start-up and
spin-off companies stay in the entrepreneurial community to employ the agglomeration advantages
and trustful relations. They occupy niches established companies cannot or won’t take.
According to Feld (2012), entrepreneurial actors and organizations should design the entrepreneurial
communities with a long-term perspective. Universities, public authorities, investors, and
mentors can support this development process. The companies in the cluster adopt different roles:
organizations with a central role, organisations interacting with other cluster, and organisations as
participant in the local network (Corsten et al., 2016). Universities complement the entrepreneurial
community with its students, professors, research institutions and laboratories, technology transfer
activities, and entrepreneurship programs. Companies in the entrepreneurial community need
expertise and social capabilities to work in network structures. Thus, innovations can be realized
at the interface of several organizations and in collaboration with customers, suppliers, research
institutions, consultants, and merchants (Ritter et al., 2014).
The geographical proximity allows various agglomeration advantages, permanent exchange of
information and knowledge with universities, and the fast recognising of local customer preferences
(Beise-Zee, 2014). Successful entrepreneurial communities attract more companies and strengthen
the network effects however unintended knowledge transfer, scarcity of resources, and an overload
of local infrastructure may also follow (Corsten et al., 2016).
According to Fritsch (2016), competitive effects of productive entrepreneurial initiatives may lead
to dynamic economic development. The quality of Start-up companies and responding activities
of established companies may lead to enhanced productivity and growth of the entrepreneurial
community. Therefore, failed start-up activities have direct learning effects for entrepreneurs as well
as indirect effects to economic development via stimulating established companies. Following such
a macroeconomic perspective, Start-up companies can be seen as an instrument for revitalisation of
established organizations and an encoder in the early stage of new industries.
Baumol (2004) describes how entrepreneurial actors identify and pursue opportunities, and
how the distribution of knowledge follows in the process. Small and new organizations realize
entrepreneurial experiments and radical innovation. Big and established organizations realize
incremental innovation, especially with high technological complexity. As a consequence, high-
growth start-up companies and small entrepreneurial organizations are key drivers for economic
development in the entrepreneurial community (Nieuwenhuizen, 2008).
Against this background, development processes in the vital entrepreneurial economy can be
navigated with a systemic perspective: Various central and decentral steering concepts as well
as planned and emergent development strategies can be directed in an integrated combination of
macroeconomic policy, cluster policy and activities, and micro level activities. Cooperation and
networking in entrepreneurial communities bring positive effects for local organizations as well as
for the vital entrepreneurial economy. Cluster configuration, steering mechanisms, and moderating
strategies for collaboration can be developed holistically in the specific local context.
The following theoretical research exploration presents two complementary theoretical constructs to
describe entrepreneurial communities in a vital entrepreneurial economy. Firstly, the living system
of an entrepreneurial community defines the basic components (systems structure, see figure 4) of
entrepreneurial communities from a living systems perspective also deduced from and related to
previous research such Miller (1995).
Secondly, based on the considered theoretical concepts of economic development and relevant
aspects of entrepreneurship discussed and presented from appropriate literature reviews shown in the
previous sections a word model with components and relationships in the system of entrepreneurial
communities is derived to design a qualitative model (systems model, see figure 5) via logical
deduction (Bossel, 2004: 64-74), pattern recognition (Vester, 2002), and elements of design science
(Oosthuizen and Pretorius, 2016).
By recognition of patterns (e.g. Malik, 1989: 298-299; Ulrich and Probst, 1991: 66-77) and reduction
of complexity, dynamic aspects (systems dynamic) and basic interrelations (e.g. Jackson, 2000: 138-
155; Senge, 2003: 75-167; Bala et al., 2017) of entrepreneurial communities in vital entrepreneurial
economies can be explored in the next section.
Figure 4: Entrepreneurial Communities and Living Systems Perspective (Consistent with Miller, 1995)
Public policy, regional promoters of economic development, chambers of commerce and other
federations as well as modern infrastructure and technology can support the cooperative exchange
processes between (7) supplier, producer (8), logistics companies (9), service companies (10),
waste management companies (11), and support companies (12). For the information process
and knowledge transfer between the organizations of the entrepreneurial community, a regional
information system for innovation (13), a regional information system for efficiency (14), and a
regional expert system (15) for interpretation of trends, patterns of future developments, and
common information and knowledge is at work. Furthermore, the entrepreneurial communities have
an internal communication system (16), a learning system for common knowledge management (17)
to collect information for entrepreneurial initiatives, and a learning system for experienced-based
learning (18) to improve processes and outcomes. For information and knowledge exchange with
other entrepreneurial communities an external information system (19) and contact management
system (20) complete the local living system.
The subsystems for material-energy exchange represent together with the subsystems for information
and knowledge exchange the internal exchange processes. Companies within the entrepreneurial
community generate agglomeration advantages via specialization and division of labour as well
as via common information, knowledge, and learning processes for efficiency, adaptation, and
innovation. The subsystems of the self-regulating navigation of the entrepreneurial community
initiate, control, and coordinate cooperation and network activities. The external exchange processes
are realized via the other complementary subsystems. Constitutional components of the external
environment are the national and supranational system, the entrepreneurial state, and the other
entrepreneurial communities in the economy.
The following qualitative systems model of an entrepreneurial community considers the basic
systems dynamics (Bala et al., 2017) and describes the material and information interaction and
networking of entrepreneurial organizations inside a regional entrepreneurial community. The
theoretical construct of the entrepreneurial community offers a conceptional connection between the
micro and macro perspective in development issues: Entrepreneurial and market processes as well
as economic policy and public moderating inside and between regional clusters facilitate viability of
interconnected organizations, regions, and economies.
vitalize regions and economies. Central actors in the entrepreneurial communities are start-up, spin-
off, corporate, academic, and social entrepreneurs, and entrepreneurial teams. Entrepreneurs and
entrepreneurial organizations identify and pursue entrepreneurial initiatives in established and new
business in interaction with its business environment.
Entrepreneurial organizations realize synergy effects and agglomeration advantages inside
entrepreneurial communities in initiating and realizing entrepreneurial activities. The strategic goal
of entrepreneurial organizations is viability and development in symbiosis with other members of
the entrepreneurial community. Entrepreneurial organizations and entrepreneurial communities are
sources of power in the process of economic development: They generate impulses for adaptation
activities, economic development, and entrepreneurial momentum in the economic system.
Inside and between entrepreneurial communities, economic policy moderates the development
processes for a holistic and future-oriented development of the national system and to integrate
the growth of the economy and the progress in the society. In summary words the entrepreneurial
system operates as follows with system elements and relations between the elements:
7. The development effects in local communities could be upwards directed (this may lead
to overheating effects) or downwards directed (this may lead to stagnation or setback).
8. Overheating, stagnation and setback in regional communities as well as the development
of new entrepreneurial communities require an active public policy to moderate the
development.
9. Entrepreneurial communities organize exchange with other local and global communities
in material and information processes.
10. Entrepreneurial communities organize exchange inside the local community in material
and information processes.
11. Leading network companies initiate and direct cooperation inside the entrepreneurial
communities.
12. Public institutions moderate cooperation inside the entrepreneurial communities.
13. Entrepreneurial communities develop an entrepreneurial momentum for adaptation and
development processes.
14. Established entrepreneurial organizations, start-up organizations, and spin-off
organizations use synergy effects and agglomeration advantages inside entrepreneurial
communities in material and information processes.
15. Established entrepreneurial organizations realize entrepreneurial initiatives in established
business via entrepreneurial actors and teams.
16. Established entrepreneurial organizations realize entrepreneurial initiatives in new
business via entrepreneurial actors and teams.
17. Start-up organizations pursue new entrepreneurial initiatives.
18. Spin-off organizations pursue new entrepreneurial initiatives.
The total system (see Figure 5) with the political, economic, and social subsystem defines the
framework for the economic cycle and the economic development. Basic decision systems of the
society (e.g. elections, negotiations, price mechanism) coordinate economy, state, citizens, and
interest groups.
History, geography, culture, and infrastructure are important factors in the development process of
nations. An entrepreneurial state takes risk to allow future-oriented development processes. The
entrepreneurial state moderates between local communities to support a holistic development of the
vital entrepreneurial economy and moderates local communities to avoid overheating or to stimulate
dynamic development processes. Although, the entrepreneurial state promotes the coordination
and initiation function of markets. Entrepreneurial communities create and deploy agglomeration
advantages and synergy effects inside the local community, link the local network to other regional
cluster, and use the entrepreneurial momentum of entrepreneurial communities.
Within the entrepreneurial communities established and new organizations use symbiotic relations.
Entrepreneurship is the driving force for personal, organizational, local, national, and global
development. Impulse for development processes are coming from a holistic combination of the
entrepreneurial dynamic of the “invisible hand” (that is the market mechanism) and the moderating
effort of the “public hand” (that is the economic policy of the entrepreneurial state).
References
Acs, Z.J., and Virgill, N., (2013), Entrepreneurship in Developing Countries. In Handbook of Entrepreneurship
Research: An Interdisciplinary Survey and Introduction, ZJ Acs and DB Audretsch (ed.), pp. 485-515. New
York: Springer.
Bala, B.K., Arshad, F.M., and Noh, K.M., (2017), System Dynamics: Modelling and Simulation. Singapore: Springer.
Baldegger, R., and Julien, P.-A., (2011), Regionales Unternehmertum: Ein interdisziplinärer Ansatz. Wiesbaden: Gabler
Verlag.
Baumol, W.J., (1968), Entrepreneurship in Economic Theory. American Economic Review, 58 (2), 64-71.
Baumol, W.J., (2004), Entrepreneurial Cultures and countercultures. Academy of Management Learning and Education,
3 (3), 316-326.
Baumol, W.J., Litan, and R.E., Schramm, C.J., (2007), Good Capitalism, Bad Capitalism, and the Economics of Growth
and Prosperity. New Haven/London: Yale University Press.
Beinhocker, E.D., (2007), The Origin of Wealth: Evolution, Complexity, and the radical remaking of Economics.
London: Random House Business Books.
Beise-Zee, M., (2014), Regionale Innovationscluster und internationale Netzwerkkompetenz. In Motoren der Innovation:
Zukunftsperspektiven der Innovationsforschung, C Schultz and K Hölzle (ed.), pp. 295-310. Wiesbaden:
Springer Gabler.
Bossel, H., (2004), Systeme, Dynamik, Simulation: Modellbildung, Analyse und Simulation komplexer Systeme.
Norderstedt: BoD.
Brekke, T., (2015), Entrepreneurship and path dependency in regional development. Entrepreneurship & Regional
Development, 27 (3–4), 202–218.
Burg, E.v., Romme, A.G.L., Gilsing, V.A., and Reymen, I.M.M.J., (2008), Creating University Spin-Offs: A Science-
Based Design Perspective. Journal of Product Innovation Management, 25, 114-128.
Burton, M.D., Sørensen, J.B., and Dobrev, S.D., (2016), A Careers Perspective on Entrepreneurship. Entrepreneurship
Theory and Practice, 40 (2), 237-247.
Carree, M.A., and Thurik, A.R., (2013), The Impact of Entrepreneurship on Economic Growth. In Handbook of
Entrepreneurship Research: An Interdisciplinary Survey and Introduction, ZJ Acs and DB Audretsch (ed.),
pp. 557-594. New York/Heidelberg: Springer.
Carlsson, B., and Stankiewicz, R., (1991), On the nature, function and composition of technological systems. Journal of
Evolutionary Economics, 1, 93-118.
Cooper, D.R., and Schindler, P.S. (2014), Business research methods. New York: McGraw-Hill/Irwin.
Corsten, H., Gössinger, R., Müller-Seitz, G., and Schneider, H., (2016), Grundlagen des Technologie- und
Innovationsmanagements. München: Verlag Franz Vahlen.
Cusmano, L., Morrison, A., and Pandolfo, E., (2015), Spin-off and clustering: a return to the Marshallian district.
Cambridge Journal of Economics, 39, 49-66.
Davids, I., (2014), Development theories: past to present. In Development, the State and civil society in South Africa, I
Davids and F Theron (ed.), pp. 5-27. Pretora: Van Schaik Publishers.
Dosi, G., Napoletano, M., Roventini, A., and Treibich, T., (2017), Micro and macro policies in the Keynes+Schumpeter
evolutionary models. Journal of Evolutionary Economics, 27, 63-90.
Drucker, P.F., (1985), Innovations-Management für Wirtschaft und Politik. Düsseldorf: Econ Verlag.
Ehrlich, I., (1990), The Problem of Development: Introduction. Journal of Political Economy, 98 (5), S1-S11.
Feld, B., (2012), Start-up Communities: Building an Entrepreneurial Ecosystem in your City. Hoboken: Wiley.
Florida, R., (2002), The rise of the creative class. New York: Basic Books.
Foster, J., (2005), From simplistic to complex systems in economics. Cambridge Journal of Economics, 29, 873-892.
Freeman, C., (1995), The „National System of Innovation“ in historical perspective. Cambridge Journal of Economics,
19, 5-24.
Fritsch, M., (2016), Entrepreneurship: Theorie, Empirie, Politik. Berlin/Heidelberg: Springer/Gabler.
Grichnik, D., Brettel, M., Koropp, C., and Mauer, R., (2010), Entrepreneurship: Unternehmerisches Denken,
Entscheiden und Handeln in innovativen und technologieorientierten Unternehmungen. Stuttgart: Schäffer
Poeschel Verlag.
Groenewegen, J., and Steen, M.v.d., (2006), The Evolution of National Innovation Systems. Journal of Economic Issues,
40 (2), 277-285.
Haines, S.G., (1998), Systems Thinking & Learning. Amherst: HRD Press.
Hayek, F.A., (1945), The use of knowledge in Society. American Economic Review, 35 (4), 519-530.
Hayton, J.V., and Cacciotti, G., (2013), Is there an entrepreneurial culture? A review of empirical research.
Entrepreneurship & Regional Development, 25 (9-10), 708-731.
He, X., and Chen, X., (2016), Empirical effects of Entrepreneurship on regional development: A Chinese local
perspective. Journal of Developmental Entrepreneurship, 21 (1), 1650003-1-14.
Hoselitz, B.F., (1952), Entrepreneurship and Economic Growth. American Journal of Economics and Sociology, 12
(1), 97-110.
Huerta de Soto, J., (2008), The Austrian School: Market Order and Entrepreneurial Creativity. Cheltenham: Edward
Elgar.
Huerta de Soto, J., (2009), The Essence of the Austrian School. Economic Affairs, 29 (2), 42-45.
Isenberg, D.J., (2010), How to start an entrepreneurial evolution. Harvard Business Review, 88 (6), 40-50.
Isenberg, D.J., (2014), What an entrepreneurship ecosystem actually is. Harvard Business Review Digital Articles,
5/12/2014, 2-5.
Jackson, M.C. (2000), Systems Approaches to Management. Boston: Kluwer Academic Publishers.
Josefy, M., Dean, T.J., Albert, L.S., and Fitza, M.A., (2017), The Role of Community in Crowdfunding Success:
Evidence on Cultural Attributes in Funding Campaigns to „Save the Local theatre“. Entrepreneurship:
Theory & Practice, 41 (2), 161-182.
Kaplan, R.S., Serafeim, G., and Tugendhat, E., (2018), Inclusive Growth: Profitable Strategies for tackling poverty and
inequality. Harvard Business Review, 96 (1), 128-133.
Kirzner, I.M., (1997), Entrepreneurial Discovery and the competitive Market Process: An Austrian Approach. Journal
of Economic Literature, 35 (1), 60-85.
Knight, F.H., (1921), Risk, Uncertainty, and Profit. Orlando: Signalmen Publishing.
Knox, P.L., and Marston, S.A., (2007), Human Geography: Places and Regions in global Context. New Jersey: Pearson.
Kollmann, T., (2014), E-Entrepreneurship: Grundlagen der Unternehmensgründung in der Net Economy. Wiesbaden:
Springer Gabler.
Krueger, N., Linan, F., and Nabi, G., (2013), Cultural values and entrepreneurship. Entrepreneurship & Regional
Development, 25 (9 –10), 703–707.
Krugman, P., (1996), A Country is not a company. Harvard Business Review, 74 (1), 40-53.
Leibenstein, H., (1968), Entrepreneurship and Development. American Economic Review, 58 (2), 72-83.
Lundvall, B.-A., (1999), National Business Systems and National Systems of Innovation. International Studies of
Management and Organization, 29 (2), 60-77.
Mack, E., and Mayer, H., (2016), The evolutionary dynamics of entrepreneurial ecosystems. Urban Studies, 53 (10),
2118–2133.
Malik, F. (1989), Strategie des Managements komplexer Systeme: Ein Beitrag zur Management-Kybernetik
evolutionärer Systeme. Bern: Paul Haupt Verlag.
Mazzucato, M., (2015), The Entrepreneurial State: Debunking public vs. private sector myths. New York: Public Affairs.
Meadows, D.H., (2008), Thinking in systems: a primer. White River Junction: Chelsea Green Publishing.
Metcalfe, J.S., (2005), The Entrepreneur and the Style of Modern Economics. In Crossroads of Entrepreneurship, G
Corbetta, M Huse and D Ravasi (ed.), pp. 33-51. New York: Springer.
Miller, J.G., (1995), Living Systems. Niwot: University Press of Colorado.
Munshi, K., (2014), Community Networks and the Process of Development. Journal of Economic Perspectives, 28 (4),
49–76.
Myrdal, G., (1974), Ökonomische Theorie und unterentwickelte Regionen. Frankfurt am Main: Fischer
Taschenbuchverlag.
Nelson, R.R., and Winter, S.G., (1982), An Evolutionary Theory of Economic Change. Cambridge: Belknap Press of
Harvard University Press.
Nieuwenhuizen, C., (2008), The Nature and Development of Entrepreneurship. In Nieman, G., Hough, J., and
Nieuwenhuizen, C. (ed.), Entrepreneurship: A South African Perspective. Pretoria: Van Shaik Publishers.
Oosthuizen, R., and Pretorius, L., (2016), Assessing the impact of new technology on complex sociotechnical systems.
South African Journal of Industrial Engineering, 27(2),15-29.
O’Shea, R., Allen, T.J., O‘Gorman, C., and Roche, F., (2004), Universities and Technology
Transfer: A Review of Academic Entrepreneurship Literature. Irish Journal of Management, 25 (2), 11-29.
Platzek, B.P., Pretorius, L., and Winzker, D.H., (2014), The Vital Entrepreneurial Learning Organization: A Corporate
Mindset for Entrepreneurial Change Management. International Journal of Innovation and Technology
Management, 11 (5), 1–23.
Platzek, B.P., and Pretorius, L., (2015), Corporate Entrepreneurship Education: Individual and Organizational Learning.
In Proc. 24th IAMOT Conference Technology, Innovation and Management for Sustainable Growth, L
Pretorius and GA Thopil (eds.), pp. 336-356. Cape Town: South Africa.
Porter, M., (1990), The Competitive Advantage of Nations. Harvard Business Review, 68 (2), 73-91.
Pretorius, L., and Davidavičienė, V., (2018), Towards technology and entrepreneurship: A perspective with cyclic
conditions. In Proc. 10th Int. Scientific Conference Business and Management, Gediminas Technical
University (VGTU) Press, 174-182. Vilnius: Lithuania.
Ramage, M., and Shipp, K., (2009), Systems Thinkers. London: Springer.
Ritter, T., Walter, A., and Rasmus, A., (2014), Netzwerk-Fähigkeiten von Unternehmen: Konzepte, Ergebnisse und
Ausblick. In Motoren der Innovation: Zukunftsperspektiven der Innovationsforschung, C Schultz and K
Hölzle (ed.), pp. 267-278. Wiesbaden: Springer Gabler.
Robert, V., Yoguel, G., and Lerena, O., (2017), The ontology of complexity and the neo-Schumpeterian evolutionary
theory of economic change. Journal of Evolutionary Economics, 27, 761–793.
Rostow, W.W., (1967), Stadien wirtschaftlichen Wachstums. Göttingen: Vandenhoeck & Ruprecht.
Scharmer, C.O., (2009), Theory U: Leading from the Future as It Emerges. San Francisco: Berrett-Koehler Publishers.
Schramm, C.J., (2004), Building Entrepreneurial Economies. Foreign Affairs, 83 (4), 104-115.
Schumpeter, J.A., (1912/2006), Theorie der wirtschaftlichen Entwicklung. Berlin: Duncker und Humblot.
Senge, P.M., (2003), Die Fünfte Disziplin, Kunst und Praxis der lernenden Organisation. Stuttgart: Klett-Cotta.
Spigel, B., (2017), The Relational Organization of Entrepreneurial Ecosystems. Entrepreneurship Theory and Practice,
41 (1), 49-72.
Ulrich, H., and Probst, G.J.B. (1991), Anleitung zum ganzheitlichen Denken und Handeln: Ein Brevier für Führungskräfte.
Bern: Verlag Paul Haupt.
Vester, F., (2002), Die Kunst vernetzt zu denken: Ideen und Werkzeuge für einen neuen Umgang mit Komplexität.
München: Deutscher Taschenbuch Verlag.
Wagner, N., Kaiser, M., and Beimdiek, F., (1989), Ökonomie der Entwicklungsländer. Stuttgart: Gustav Fischer Verlag.
Wessels, A. (2013). The development of complex systems: an integrated approach to design influencing. Pretoria:
University of Pretoria.
Witt, U., (1987), Individualistische Grundlagen der evolutorischen Ökonomik. Tübingen: J. C. B. Mohr (Paul Siebeck).
Zahra, S.A., and Wright, M., (2011), Entrepreneurship’s Next Act. Academy of Management Perspectives, 25 (4), 67-83.
Pavitra Dhamija
University of Johannesburg, Faculty of Engineering and
The Built Environment, South Africa
E-mail: dhamijaresearch@gmail.com
Arnesh Telukdarie
University of Johannesburg, Faculty of Engineering and
The Built Environment, South Africa
E-mail: arnesht@uj.ac.za
Abstract
Technology plays a crucial role in the developmental activities of every nation, in general and even more important
for the developing economies. Essential for government, as well as the society, to understand the importance of
maximizing existing technology. The aim is to have technological enhancements for sustainable growth in today’s
competitive environment. The innovative activities related to technology not only impacts the economic status of a
nation, but also its social status. Technological knowledge is identified as a crucial engine for a nation to develop
and outperform its competitors. Another irrefutable fact is that the major source of development for every economy
is its people or citizens especially the category of youth. The major perspective of this paper is to study the aspect
of technology and the manner it empowers the youth specifically in the African continent. Youth act as catalyst of
change, (i.e. social, technological, economical) to endeavor growth and developmental activities. The data for the
same is extracted from Scopus Database. Considering 180 published papers chosen from the last ten years starting
from 2009 to 2018 (September 27, 2018) covering different keywords i.e. Social Impact; Technology; South Africa;
South African Youth. The findings are drawn out by a systematic review and bibliometric analysis to identify the
authors, keywords, and countries who have contributed the most in this area. The results reveal the awareness of
this concept among authors to a greater extent. The keywords like technology, social impact, has been a part of the
explanation but the aspect of youth and its development is genuinely a gap. This study has identified the different
clusters that explain the existing literature and future prospects of the research in this area. The implications are
discussed in detail in the subsequent sections of the paper.
Keywords: Social Impact, Technology, South Africa, South African Youth, Systematic Review And Analysis
1. Introduction
Stimulating the growth and expansion of existing as well as emerging technologies is worthwhile to
obtain competitive edge, especially with respect to technological innovations (Hung and Chu, 2006).
Such initiatives not only uplift the country at large in terms of economic, political, and societal
benefits, but also delivers such benefits to the other economies of the world (Köhler and Som,
2014). Due to the conservative approach, most of the time, only the benefits and the advantages
of technology from the perspective of economy take the fore front leaving aside its societal impact.
Rather, the innovative activities related to technology not only impacts the economic status of
a nation, but also its social status. The major perspective of this paper is to study the aspect of
technology and the manner it empowers the youth. The present study is a systematic analysis of the
existing literature with a specific reference given to the societal aspect of technology in South Africa.
The consulted literature also confirms the non-implementation of advance tools like bibliometric
and network analysis (Misra et al., 2012). If applied, such tools can enable results in the form of
cluster analysis. The above gap is thus addressed by reviewing technology and its social impact with
IAMOT 2019 | 888
Social Impact of Technology: A Systemetic Review and Analysis
specific reference to South Africa (2009-2018); applying bibliometric and network analysis on 180
papers and discussing clusters for future recommendations.
2. Review of Literature
The technological advancements have taken a hype in the recent decades. A lot of change has
been witnessed with respect to the data and its usage. The need for data gathering platform have
witnessed a great rise. The technological trends not only provide new hopes but also put across certain
unintentional impacts which in turn raises concerns for an established society (Abolfazli et al., 2014).
Although, the existing technologies are created by taking a lot of aspects into consideration but still
at times the developer fails to gauge its detrimental effects on the society at large. For instance, to
understand the dark aspect of the technology, consider the digitalization that has happened in the
labor market globally, which has amplified the unemployment rate (Halaweh, 2013). Ma et al. (2014)
Expressed that the extensive use of gadgets (mobile phones and tablets) has almost brought in a
revolution in the economy globally. For youth, mobile phones are the best mode of communication
in comparison to the in person meetings Misra et al. (2016).
4. Bibliometric Analysis
The existing research has selected BibExcel for analysis. This is due to the versatility of the software
and secondly the file generated by this software is readily accepted by the next selected software i.e.
Gephi for the final analysis. It accepts the file in RIS format which is very much required to make
it suitable for Gephi. The forthcoming sections shall discuss about author influence, and keyword
statistics.
Word Frequency
Sustainable Development 29
Economic and Social Effects 14
Sustainability 14
Developing Countries 12
Social Impact 12
South Africa 12
Corporate Social Responsibility 9
Environment Impact 9
Economics 8
India 8
Source: Scopus Database; 2009 to 2018 (27th Sep)
5. Network Analysis
The network analysis is the next step after bibliometric analysis. The Gephi software has been used
in this study for the same as it provides powerful visualisations (Oloruntoba and Kovács, 2015). The
file received from BibExcel with the .NET extension is transferred to Gephi for to produce results in
the form of citation and co-citation analysis, and results are presented in the form of nodes and edges.
The process of clustering denotes putting together of elements with identical characteristics (Radicchi
et al., 2004). In bibliometric analysis, it conveys the collection of papers of the similar viewpoints.
The dense linked nodes are more connected to each other as compared to the nodes which are less
closely associated (Clauset et al., 2004). The software measures this aspect by applying modularity
concept whose value ranges between −1 and +1.
The figure above indicates the structure of clusters (see Figure 3). The different colors in the figure
represent two different clusters. This also conveys that different papers of a same cluster share a
strong co-citation association (Clauset et al., 2004).
The cluster analysis results in sharing the importance of each cluster. The present study has identified
two clusters (see Table 4). The top 10 authors of each cluster have been listed in the table below (see
Table 3). The significance of each cluster has been discussed subsequently.
Table 3: Co-Citation: Top 10 Papers in 2 Clusters: Social Impact and Technology
Cluster 1 Cluster 2
Fifka (2013) Kucukvar (2014)
Prayag et al. (2013) Heere et al. (2013)
Schulenkorf (2010) Mena et al. (2010)
Cobbinah et al. (2015) McNie et al. (2016)
Stephan (2016) Ahmadi (2012)
De Luca (2015) Kannan (2018)
Othman (2009) Rodrigo (2016)
Viebahn (2014) Stephan (2016)
Gholami (2016) Knott (2013)
Yu (2016) De Luca (2015)
Technology and Societal -Conceptual context of technology Advance research related to impact of technology both
Sustainability and sustainability positive and negative specifically with reference to
South Africa and sustainability
-Relationship between technology
and society
Cluster 2:
Economic and Social -Importance of social effects of The economic aspect can be researched while
Effects of Technology technology combining it with youth in the society
Source: Scopus Database; 2009 to 2018 (27th Sep) and Self Research
With respect to cluster 1, the authors have contributed and discussed about the conceptualization
of technology and the social impact of the same. The association between the two have also been
considered and discussed. The contribution by authors also reveals the negative impact of technology
say unemployment. The cluster 2 includes the studies related to economic and social impact of
technology. It elaborates about the different aspects of technology and its societal impacts. It also
discusses that how technology can be used for the upliftment of the society. The authors opined that
economic development is highly dependent on the technological development of any economy. The
conducted studies reveal that technology puts a heavy impact on the settlement of youth in every
nation. The cluster-wise table elaborates about the current research and also the future suggestions/
recommendations that can be considered by the future researchers.
7. Conclusion
The present paper has studied the aspect of social impact of technology with reference to South
African perspective. The received results evidence that this is one of the immediate choices of
researchers and academicians who possess interest in this area. It is expected that this paper will act
as good source of knowledge for the upcoming researches in this field of research.
References
Abolfazli, S., Sanaei, Z., Ahmed, E., Gani, A., & Buyya, R. (2014), Cloud-based augmentation for mobile devices:
motivation, taxonomies, and open challenges, IEEE Communications Surveys & Tutorials, 16(1), 337-368.
Chen, C., Ibekwe-SanJuan, F. and Hou, J. (2010), ‘The structure and dynamics of co-citation clusters: a multiple
perspective co-citation analysis’, Journal of the American Society for Information Science, 61 (7), 1386–
1409.
Clauset, A., Newman, M.E.J. and Moore, C. (2004), ‘Finding community structure in very large networks’, Physical
Review E, 70 (6), 1–6.
Halaweh, M. (2013), Emerging technology: What is it. Journal of technology management & innovation, 8(3), 108-115.
Hung, S. C., & Chu, Y. Y. (2006), Stimulating new industries from emerging technologies: challenges for the public
sector, Technovation, 26(1), 104-110.
Köhler, A. R., & Som, C. (2014, Risk preventative innovation strategies for emerging technologies the cases of nano-
textiles and smart textiles, Technovation, 34(8), 420-430.
Ma, H., Zhao, D., & Yuan, P. (2014), Opportunities in mobile crowd sensing, IEEE Communications Magazine, 52(8),
29-35.
Misra, S., Cheng, L., Genevie, J., & Yuan, M. (2016), The iPhone effect: the quality of in-person social interactions in
the presence of mobile devices, Environment and Behavior, 48(2), 275-298.
Oloruntoba, R. and Kovács, G. (2015), ‘A commentary on agility in humanitarian aid supply chains’, Supply Chain
Management: An International Journal, 20 (6), 708–716.
Pilkington, A. and Liston-Heyes, C. (1999), ‘Is production and operations management a discipline? A citation/co-
citation study’, International Journal of Operations and Production Management, 19 (1), 7–20
Radicchi, F., Castellano, C., Cecconi, F., Loreto, V. and Parisi, D. (2004) ‘Defining and identifying communities in
networks’, Proceedings of the National Academy of Sciences of the United States of America, 101 (9),
2658–2663.
Van Eck, N.J. and Waltman, L. (2013) Manual for VOSviewer Version 1.5, Universiteit Leiden and Erasmus Universiteit
Rotterdam, p.4.
Abstract
Sustainable value chains are a drive towards minimising non-renewable resource consumption. Globally, the goal
is to achieve sustainability in resource consumption from the point of production to the end-of-life (EoL) of the
product. To achieve sustainability in the recovery chains of wastes, a number of aspects contribute. Waste collection
systems are important aspects to value chains in waste recovery systems. This research aimed to assess the types
of waste collection systems that influence sustainable plastic solid wastes (PSWs) recovery from households in a
developing country of Zambia, Africa. The specific objectives of the research were to; identify the types of waste
service providers; determine the different kinds of waste collection systems used and preferred by the households;
and make a comparative analysis.
A non-experimental survey was conducted in Ndola city. 345 structured questionnaires were distributed to
households in the different locations of Ndola city. Stratified sampling was used to determine the number of
questionnaires for distribution in each location. Further, simple random sampling was used to distribute the
questionnaires to the households. 299 questionnaires were analysed using Software Package for Social Sciences (SPSS).
The results revealed that, waste is collected for disposal and recovery purposes. The private waste companies,
municipality, informal waste collectors (IWCs) and plastic waste manufacturing and recycling companies collect
PSWs. However, unsustainable ways of disposing wastes are performed by households such as burning and burying.
The majority of wastes is collected by the private waste collectors 34%. A number of waste collection systems are
used and majority of the households use Kerbside waste collection systems 68%. Nevertheless, Buy-Back Centres,
Deposit Refund Systems, Drop-off Systems and Extended Producer Responsibility (EPR) are other waste collection
systems used. For waste collection systems preferred by the households, majority prefer Kerbside waste collection
systems (89.7%. However, 83.7% prefer Buy-Back Centres
Design of sustainable value chains for waste recovery is an important aspect of achieving sustainable resource
utilization. Therefore, understanding the importance of waste collection systems in the value chain is an important
innovation component. For waste collection providers and recoveries, the study contributes by highlighting the types
of waste collection systems preferred by households. These systems are cardinal for implementation when designing
waste recovery systems. Further, integration of households in the value chains of waste recovery systems is cardinal
for achieving success. To policy makers the results provide insights for consideration when developing waste
recovery and management policies. Inclusion of sustainable waste collection systems based on the households’
perspective in policies is an effective drive for achieving sustainability in recovery systems
Keywords: Value Chains, Systems, Waste Recovery, Innovation, Plastic Solid Wastes, Sustainability
1. Introduction
Sustainable recovery of PSWs is a pressing challenge for developing economies. The production of
plastic products was estimated at 7.3% of the world production in Middle East and Africa (World
Watch Institute, 2015). By 2025 the generation of PSWs is estimated to increase from 8% to 13%
in Africa (Hoornweg and Bhada-Tata; 2012). For developing economies, majority of the projected
PSWs increases has no planned solutions and recovery is mainly performed by the IWCs (Gutberlet,
2010, Scheinberg et al., 2011; Ezeah et al., 2013). Hoornweg and Bhada-Tat (2012) indicates that,
only 41% of waste collection is performed in lower income economies compared to 85% in higher
income economies. To achieve sustainable recovery rates in developing economies, identification
and understanding of the different types of waste collection systems is necessary.
IAMOT 2019 | 894
Sustainable Resource Recovery through Waste Collection Systems: Households Perspective
Several have focused on sustainable ways of managing and recovering PSWs. Studies on waste
collection systems have focused on a number of aspects in the waste management arena. Economic
and environmental assessment of waste collection systems has been studied (Andrews et al., 2013;
Pires et al.,2017; D’Onza et al., 2016; Greco et al., 2015; Miller et al., 2014). Technical assessment
of waste collection systems has been conducted (Rodrigues et al., 2016a; Teixeira et al., 2014a).
The impact of waste collection systems on the environment has been examined using life cycle
assessment (LCA), participation, recycling and separation rates (Iriarte et al., 2009; Punkkinen et al.,
2012; Rives et al., 2010; Usón et al., 2013; Yıldız-Geyhana et al., 2016).
The information provided by the above assessed studies provides clarity on a number of issues
surrounding waste collection systems. However, different waste collection systems present different
attributes based on the differences in the amount of waste recovered for the same waste type in different
contexts. Practically, application of a specific waste collection systems is influenced by location,
operation costs, road network and aesthetic aspects. In Zambia application of different waste collection
systems has been in existence since the 1990s. The use of Kerbside and Drop-off collection systems
is widely used by the municipality and private waste collectors. Buy-Back Centres and Bring systems
for recyclable wastes are used by waste recoveries. Different types of wastes are recovered including
plastics, metal, glass and papers. Despite the existence of waste collection systems, the recovery rates
for recyclable or reusable wastes is still low. 3% of Municipal Solid Wastes (MSWs) are recovered by
the IWCs while 6% is recovered by the formal waste service providers (World Bank, 2012).
The paper is aimed at assessing the existing waste collection systems in Zambia in order to provide
decision support to PSWs recoveries and recyclers. The specific research questions include;
i. What are the existing waste collection service providers?
ii. What are the types of waste collection systems existing in Zambia?
iii. What are the types of waste collection systems used by households?
iv. What are the preferred waste collection systems by the households to influence
PSWs recovery?
v. Is there a linkage between waste collection systems and waste recovery?
Globally, in several developing economies, Solid Waste Management (SWM) is a huge challenge
to environmental management and this is critical in cities of developing economies (Idris et al,
2004; Zhang et al., 2010; Diaz and Otoma, 2014). A number of policies and strategies on solid
waste management (SWM) in developed and developing economies have been put in place. Policies
focusing on source-separation, pay as you throw (PAYT), EPR and many others. In developed
economies, studies on waste collection systems have focused on different aspects while other have
made comparative analysis on waste recovery rates. For example, Kerbside waste collection of
organic wastes has become a dominant waste collection system in European Nations (Bernstad and
La Cour Jansen, 2012).
8. Methodology
validity, questionnaires were presented to the experts in the field. A pilot study was conducted with
10 household respondents to ensure the questionnaire did not present any problems during the survey.
Figure 2 depicts the types of waste collection service providers. The results indicate that, the
majority of wastes is collected by the private waste collectors (34%). In terms of PSWs recovery
for recycling purposes, the plastic manufacturing companies, are the least recoveries (0%). Further,
the respondents have indicated that, ‘other’ options of disposing of wastes are used. 32% of the
respondents dispose of their wastes by ‘burying or burning’ it. According to Hoornweg and Bhada-
Tata (2012), only 41% of the waste generated in developing economies is collected for disposal.
This affirms the results that, only 11% of the waste generated by the households is collected by the
municipalities and 34% by the private waste collectors.
The assessment of the households on the types of waste collection service providers also indicates
that the IWCs perform waste collection. Only 7% of the IWCs collect recyclable PSWs from the
households. In developing economies, different types waste collection service providers exist despite
the low collection rates (Hoornweg and Bhada-Tata, 2012).
Despite the low utilization by the households on the other waste collection systems, it can be affirmed
that, these systems exist in Zambia. For instance, the Deposit Refund system (5%) represents a high
utilization compared to the EPR system.
ERP is the third preferred waste collection system by the households. 79.3% of the households
would be influenced to particpate in PSWs recovery programs with the implementation of ERP by
the companies. The fact that, less than 1% of the Plastic Manufacturing and Recycling Companies
collect and recover PSWs from households, is an indication that, EPR is not compiled to by the
producers. This justifies the low representation by the households in Figure 3. To this regard,
households are willing to particpate in PSWs recovery programs if more companies comply to EPR.
10. Conclusion
based on the analysis of the study, it has been found that, in Ndola urban areas, five different types of
waste collection systems are used by waste collection service providers to recover and collect PSWs
from households. In order to establish the most sustainable waste collection systems for optimal
recovery of PSWs, existing waste collection systems are assessed and majority of the households use
kerbside wastes collection system while ERP is the least used. Households are further investigated
on the waste collection systems that would influence their participation in PSWs recovery. The
results have indicated that Kerbside, Buy-Back Centres and ERP are the sustainable waste collection
systems from the households’ perspective.
With regard to the different types of waste collection service providers, it was found that, the
private waste collectors are the major collectors of wastes. In addition, the IWCs are involved in
the collection and recovery of PSWs. The study has shown that, the IWCs recover more PSWs from
households than the plastic recycling and manufacturing companies. This indicator is important for
incorporating the IWCs into formalised systems.
The information from this study is important to policy makers, waste managers and stakeholders
in the waste management sector. A platform to understand the different types of waste collection
systems from the perspective of households in a developing economy has been provided. This
information is key when developing polices and systems for resource recovery and utilization. As
the developed and developing economies strive to achieve a circular economy, information on the
drivers for sustainable resource recovery from different contexts is useful.
11. Acknowledgements
First and foremost, we thank all the households that took part in the study by way of responding to
the questionnaires. Without the invaluable support of the households, this study would not have been
possible. We are grateful for the financial support from the University of Johannesburg. Without
your financial support, this study would not have been presented and published.
References
Al-Salem, S.A., Lettieri, P., and Baeyens, J.,. 2009. “Recycling and recovery routes of plastic solid waste (PSW): A
review.” Waste Management 29: 2625–2643.
Arbulú, I, Lozano, J, and Rey-Maquieira, J,. 2016. “The challenges of municipal solid waste management systems
provided by public-private partnerships in mature tourist destinations: The case of Mallorca.” Waste
Management 51: 252–258.
Astrup, N., and Hedh, A,. 2011. “Joint Parliamentary Committee, European Economic Area.” European Refunding
Scheme for Drinks Containers.
Bernstad, A., la Cour Jansen, J,. 2012. “Separate collection of household food waste for anaerobic degradation
comparison of different techniques from a systems perspective.” Waste Management 32 (5): 806–815. doi:
doi:10.1016/j.wasman.2012.01.008.
Bing, X., Bloemhof-Ruwaard, J.M., and van der Vorst, J.G.A,. 2014. “Sustainable reverse logistics network design for
household plastic waste.” Flex Serv Manuf J 26: 119-142.
Binnemans, K., Jones, P.T., Blanpain, B., Van Gerven, T., Yang, Y., Walton, A., and Buchert, M,. 2013. “Recycling of
rare earths: a critical review.” Journal of Clean Production 21: 1-22.
BIO Intelligence Service. 2013. “Study on an increased mechanical recycling target for plastics.” final report prepared
for Plastic Recyclers Europe.
Brems, A., Baeyens, J., and Dewil, R. 2012. “Recycling and recovery of post-consumer plastic solid waste in a European
context.” Therm. Sci. 16 (3): 669–685.
Dias J.K.T.S., and Braga, S.S. 2016. “The use of reverse logistics for waste management in a Brazilian grocery retailer.”
Waste Management & Research 34 (1): 22-29.
Ezeah, C., Fazakerley, J.A., and Roberts, C.L,. 2013. “Emerging trends in informal sector recycling in developing and
transition countries.” Waste Management 33: 2509-2519.
Ezeah, C., Fazakerley, J.A., and Roberts, C.L,. 2013. “Emerging trends in informal sector recycling in developing and
transition countries.” Waste Management 33: 2509-2519.
Ghauri, P., and Grønhaug, K,. 2005. Research Methods in Business Studies: A Practical Guide. . Edited by 3rd. Harlow:
Financial Times Prentice Hall.
Gobbi, C.N., Sanches, V.M.L., Pacheco, E.B.A.V., Guimarães, M.J.O.C. and de Freitas, M.A.V,. 2017. “Management of
plastic wastes at Brazilian ports and diagnosis of their generation, Marine.” Marine Pollution Bulletin 124: 67-73.
Grinnell, R.M., and Williams, M,. 1990. Research in social work: a primer. Itasca. Ill : Peacock.
Henry, R.K., Yongsheng, Z., and Jun, D,. 2006. “Municipal solid waste management challenges in developing countries
– Kenyan case study.” Waste Management 26 (1): 92-100.
Hopewell, J., Dvorak, R., and Kosior, E.,. 2009. “Plastics recycling: challenges and opportunities.” Phil. Trans. R. Soc.
B 364 34: 2115-2126.
Hui, Y., Li, W., Fenwei, S. and Gang, H. 2006. “Urban solid waste management in Chongqing: challenges and
opportunities.” Waste Management 26: 1052-1062.
Idris A, Inanc B, Hassan M.N. 2004. “Overview of waste disposal and landfills/dumps in Asian countries.” J Mater
Cycles Waste Management 6: 104–110.
Mastellone, M.L,. 1999. Thermal treatments of plastic wastes by means of fluidized bed reactors . Ph.D. Thesis, , Italy.:
Department of Chemical Engineering, Second University of Naples.
Mohsen, S,. 2015. “A framework for sustainable waste management: challenges and opportunities.” Management
Research Review .
Murakami, F., Sulzbach, A., Pereira, G.M., Borchardt, M., and Sellitto, M.A,. 2015. “How the Brazilian government can
use public policies to induce recycling and still save money?” Journal of Cleaner Production 96: 94-101.
Mwanza, B.G., Mbohwa, C. and Telukdarie, A.,. 2018. “The Influence of Waste Collection Systems on Resource
Recovery: A Review.” Procedia Manufacturing 21: . 846-853. Available online at www.sciencedirect.com.
NORD, TEMA. 2014. “Collection and recycling of plastic waste. Improvements in existing collection and recycling
systems in the Nordic countries.” Accessed 03 03, 2015. http://www.scpclearinghouse.org/upload/
publication_and_tool/file/427.pdf (2014).
Paolucci, M., De Filippis, P., and Borgianni, C.,. 2010. “Pyrolysis and Gasification of Municipal and Industrial Wastes
Blends.” Thermal Science 14 (3): 739-746.
Pattnaik, S, and Reddy, M.V,. 2010. “Assessment of Municipal Solid Waste Management in Puducherry (Pondicherry),
India,.” Resources, Conservation and Recycling 54: 512-520.
PCAESG. 2011. Packaging Consumer Awareness and Education Steering Group, Recycling Used Packaging from
the Domestic Waste Stream, Consumer Awareness and Education. PCAESG. doi:10 30, 2015. https://
www.ipsos-mori.com/researchpublications/researcharchive/1891/Recycling-Used-Packaging-From-The-
Domestic-Waste-Stream-Consumer-Awareness-And-Education.aspx.
Pires, A., Martinho, G., Ribeiro, R., Mota, M., Teixeira, L.,. 2015. “Extended producer responsibility: a differential fee
model for promoting sustainable packaging.” Journal of Cleaner Production 108 (A): 343-353.
Reinhart, D, Bollard, C.S. and Berge, N,. 2016. “Grand Challenges – Management of municipal solid waste.” Waste
Management 49: 1-2.
Rhyner, C.R., Schwartz, L.J., Wenger, R.B., and Kohrell, M.G.,. 1995. Waste Managementand Resource Recovery .
Boca Raton, FL.: Lewis Publishers.
Sarkis, J., Helms, M.M., and Hervani, A.A,. 2010. “Reverse logistics and social sustainability.” Corp. Soc. Responsibility
Environ. Manag 17 (6): 337-354.
Saxena, S., Srivastava, R.K, and Samaddar, A.B,. 2010. “Towards sustainable municipal solid waste management in
Allahabad City.” Management of Environmental Quality: An International Journal 21 (3): 308 – 323.
Scheirs, J,. 1998. Polymer Recycling: Science, Technology and Application . 1st. Wiley-Blackwell.
Taiwo, A.M,. 2011. “Composting as a sustainable waste management technique in developing countries.” Journal of
Environmental Science and Technology 4: 93-102.
Usón, A.A., Ferreira, G., Vásquez, D.Z., Bribián, I.Z., Sastresa, E.L.,. 2013. “Environmental-benefit analysis of two
urban waste collection systems.” Sci Total Environ. 463–464, 72-77.
Welle, F,. 2011. “Twenty years of PET bottle to bottle recycling—An overview.” Resources, Conservation and
Recycling 55: 865-875.
Wilson, D.C., Velis, C.A., and Rodic, L,. 2013c. “Integrated sustainable waste management in developing countries.”
Proc. Inst. Civil Eng.” Waste Res. Manage 166: 52-68.
Xevgenos, D., Papadaskalopoulou, C., Panaretou, V., Moustakas, K., and Malam, D. 2015. “Success Stories for
Recycling of MSW at Municipal Level.” Waste Biomass Valor 6: 657-684.
Yildiz-Geyhan, E., Yilan-Çiftçi, G., Altun-Çiftçiog˘lu, G.A., and Kadirgan, M.A.N.,. 2016. “Environmental analysis of
different packaging waste collection systems for Istanbul – Turkey case study.” Resour. Conserv. Recycl.
107: 27–37.
Janne Leinonen
Aalto University, Department of
Industrial Engineering and Management, Finland
E-mail: janne.leinonen@aalto.fi
Jürgen Poesche
Aalto University, Department of
Industrial Engineering and Management, Finland
E-mail: jurgen.poesche@aalto.fi
Ilkka Kauranen
Aalto University, Department of Industrial Engineering
and Management, Finland
E-mail: ilkka.kauranen@aalto.fi
Abstract
In the extant literature, sustainability is typically seen as a dichotomic issue. Any new technology is seen either
as sustainable or as unsustainable. In contrast to this widespread view, sustainability should be understood as a
continuum. A technology should be analysed in-depth and relevant characteristics of the technology should be
identified so that the sustainability effect of each characteristics can be assessed. The sustainability of a technology
is the net-effect of the sustainability of its various characteristics. Thus, sustainability is a continuum of different
shades of grey between black or white. The implication is that sustainability is dependent on the context. The
relative contribution of various characteristics of a technology is different in different contexts.
In this study, an emerging new technology - building houses using 3D printers with robot technology - was analysed
from the sustainability point of view. Relevant characteristics of this technology were identified and analysed in-
depth.
Keywords: 3D Printing; Robots; Construction Industry; Sustainability; Regulation
to be approximately 151 exajoules (EJ) in 2015 that equals to 36% of the total final energy use. The
construction industry as part of total, including the manufacturing of materials for the buildings
themselves, was reported to consume 26 exajoules that represent nearly 6% of the total energy end
use. Similarly, buildings represent approximately 28% and the construction industry 11% of global
CO2 emissions. (UN Environment and International Energy Agency, 2017)
2. THEORETICAL framework
Sustainability consists of the environment, the economy and the social component. Sustainability
targets discussed often have a political aspiration. Business ethics (Ferrell & Gresham, 1985;
Trevino, 1986; Bommer, et al., 1987; Vee & Skitmore, 2003), values and regulation (Stead, et al.,
1990; Bommer, et al., 1987) create foundations for sustainable development in the construction
industry. The importance of the managerial role is noted as a driver for the company’s culture,
values and conduct (Stead, et al., 1990; Tow & Loosemore, 2009; Toor & Ofori, 2009; Man-Fong
Ho, 2011). Sustainability-related innovation in construction has been found to establish successful
competitive strategies (Bryson & Lombardi, 2009), and increase the market value of companies
(Kajander et al, 2012).
Sustainability is a value judgement that incorporates individual moral principles. The approach on
ethics and sustainability in the extant literature is often dichotomic (Abela & Shea, 2015; Wempe &
Frooman, 2018). Either something is sustainable, or it is not sustainable.
Construction is a capital-intensive industry in which capital expenditures play a significant role in the
company’s success. Improving sustainability requires capital investments in production technologies
and in sustainable material development. Directives and regulation can help in addressing important
issues by encouraging companies towards sustainability.
For example, in Europe, a Directive 2010/31/EU on the energy performance of buildings guides
European legislation towards sustainability (The European Parliament and the Council of the
European Union, 2010). Further, on a regional level, The European Commission has demonstrated
their will, commitment and skills to tackle global sustainability issues on their behalf, utilizing
Circular Economy Action Plan, and energy and climate targets for 2030 and 2050 (European
Commission, 2017). The European Commission has developed a European Union wide tool called
Level(s), a voluntary assessment and reporting framework, that improves the sustainability of
buildings.
existing technology, concrete is printed layer by layer. Picture 1 illustrates the gantry-type concrete
printer. The printer looks mechanically a bit like a conventional overhead crane, allowing x, y, and
z movements for the printing head. The printing nozzle of the machine moves following a pre-
programmed path creating the wanted structure. The mechanical size of the gantry-type printer limits
the size of the printable object. The 3D printers having industrial robots equipped with a printing
head are either stationary or mobile. A stationary robot limits the working area of the 3D printer to
the robot’s working envelope, but recent research has showed that a large-scale 3D structure can
potentially be printed utilizing multiple mobile robots (Zhang, et al., 2018). The gantry-type 3D
printer can also be equipped with an industrial robot enabling several additional functions as shown
in Picture 2. A 3D concrete printer developed by a Finnish company called Fimatec Oy is able to
make the surface finishing of the printed wall, add strengthening iron structures into the printed
concrete and even add electricity joint-boxes (Tekniikka&talous, 2017).
Picture 1. Example of a gantry-type 3D concrete printing machine. The frame moves horizontally on tracks. Horizontal
and vertical movements are controlled by servo drives. An integrated robot is making assistance tasks. Courtesy of
Fimatec Oy
Picture 2. Example of a hybrid 3D concrete printing machine making an isolated wall. A rebar grid is installed prior to
concrete and isolation printing. A robot is installing additional reinforcements to the printed wall. Courtesy of Fimatec Oy.
in-depth. Advantages and disadvantages from the sustainability point of view are grouped into the
categories. Advantages and disadvantages from the sustainability point of view are identified.
In 3D printing technology, digital models are used to create a printable object, and the model
is compiled for a 3D printer that can reproduce, layer by layer, the wanted outcome. This gives
architects the freedom to create innovative shapes and structures without moulds (Ford & Despeisse,
2016; Flores Ituarte, et al., 2016), and with an efficient and optimized structural design dispensing
only the necessary amount of material (Wangler, et al., 2016; Flores Ituarte, et al., 2016). Nowadays
concrete is the most common printable construction material, but the number of available materials is
expanding. Architects can design printable objects from sustainable materials, such as green concrete
that includes recycled waste material as a component (Suhendro, 2014), and earth-based materials
(Perrot, et al., 2018), or recently emerged bio composite materials (UPM, 2018). Depending on the
printable material, or the shape, the strength of the printable material can be improved for example
by fibre-reinforcement (Ngo, et al., 2018) or by external steel structures to a certain extend (Asprone,
et al., 2018). Hence, the sustainability potential of 3D printing with robots in the design phase rises
from the material savings (no moulds needed, optimized structured design, no waste), and favouring
printable sustainable materials in the building architecture.
Depending on the type of the 3D printer, the manufacturing technology allows production on-site,
or at a factory. The sustainability potential in the manufacturing phase rises from a small amount
of construction waste material in the erection process (Sakin & Kiroglu, 2017), reduced number
of supportive constructs or moulds, and reduced on-site construction material surplus as just right
amount of material can be printed (Ngo, et al., 2018; Ford & Despeisse, 2016). The 3D printing with
robots also offers lower total energy consumption and less pollution on-site as the waste material
traffic is reduced. The 3D printing with robot technology can improve resource and energy efficiency
because the same machine can print isolated walls and even integrate other work stages, such as
surface finishing or joint-box installation (Tekniikka&talous, 2017) by utilizing tool exchangers
and dedicated tools. Also, the 3D printing with robot technology offers homogenous quality due
to controlled concrete dispensing, and the possibility to use local raw materials. Generally, the
3D printing as a production technology allows production based on individual needs with lower
investment costs.
Building houses with a 3D printer with robot technology improves safety on site and has potential to
improve the construction industry’s reputation. Occupational diseases and accidents can be reduced
due to the fact that the 3D printer can take care of dangerous operations in construction and perform
repetitive jobs. 3D printing can also can improve the attractiveness of the construction industry as
a working place because the safety aspect is improved, and the job descriptions of a blue-collar
employees are closer to those of a robot programmer than those of a construction worker. Table 1
categorises sustainability advantages of using 3D printers with robot technology in the construction
industry.
Table 1: Sustainability advantages of using 3D printers with robot technology in the construction industry
Advantage Category Notes
Possibility for innovative shapes Architecture More freedom to design
Structure optimization Architecture/Material management Digital structure optimization
Less waste in erection process Waste management No construction mould needed
Less construction waste Waste management Possible to print only what is needed
Construction material surplus Material management Appropriate amount of material on
site, no surplus waste
Less material usage Material management Precise printing with no excessive
material usage
Possibility to use recycled concrete Material management Printing of recycled concrete
Possibility to use bio composites Material management Increases recycling and the use of
natural materials
Printing on-site or in the factory Operations management Depends on the printer design
Stronger buildings Material management Reinforcing
Customization of printed objects Business management Low cost of individualized products
Less accidents on site Human safety Less occupational accidents
Less repetitive jobs Human safety Less occupational diseases
Better industry reputation Business/Human safety Due to increased safety on site
More attractive job descriptions Social Construction workers become more
like robot programmers
Reduced traffic to and from site Energy/Pollution management Less transportation of waste
Possibility to use several sustainable Material management 3D printing is suitable as technique
material types
Consistent quality Energy/Material management Less air holes in wall structure
Energy savings Energy management Isolated wall in life cycle
Integrated work stages Operations management Tool exchangers, tools, surface covers,
pipes, joint-boxes
The 3D printing with robot technology also has some disadvantages are regards to sustainability.
The 3D printing is still a nascent technology. There is only little experience of its reliability. An
investment for a single 3D printer is typically between 50,000 to 500,000 euros depending on the
technology used. The size of an investment makes the technology available only for large companies.
Typically, a construction site is dirty, dusty and the environment temperature and humidity may
vary. These factors will affect the 3D printer reliability as the operational temperature range of an
industrial robot is typically between +5 and +50 Celsius, and relative humidity of the environment
should be less than 95 percent. General industrial robots are designed for Ingress protection class 67
(ABB Robotics, 2018), meaning they are partly dust-proof but not designed for continuous water
contact.
The 3D printers with robot technology have a certain work envelope determined by the gantry’s
mechanical structure and the physical size of the manipulators. This sets limits for the building or
module that is printed and it can limit the possible designs. Similarly, the printing design might be
limited by the weight of the printing nozzle. The heavier the nozzle together with extruded concrete
is, the larger the robot is. The larger the robot and the load are, the more the robot consumes energy.
The technology integrated into the 3D printer requires different skills on site to support continuous
construction work. Skilled robot programming and maintenance people are needed to support not
only in operations, but also in the machine designing phase in order to create reliable tool designs
and for the total production machine with respect to regional machinery safety standards.
The material quality is an important factor in 3D printing. Consistent concrete quality including a
specified size range of stones enables fluent material flow through the nozzle and the high quality of
the print. One major challenge in 3D printing with robots is interlayer contamination, that is, a result
of a good concrete mixture, the speed of printing and humidity. Different kind of machine vision
systems could improve the quality control of interlayer contamination, but these technologies are
sensitive to dust and natural light. Addressing interest in material origin, especially in case of green
concrete and in other recycled materials, is important. The general issue regarding the 3D printer
technology is fulfilling the required machine safety related standards that aim to secure human safety
during machine operations. Table 2 categorises sustainability disadvantages of using 3D printers
with robot technology in the construction industry.
Table 2: Sustainability Disadvantages of using 3D Printers with Robot Technology in the Construction Industry
Human and machine safety issues Engineering Fulfilling safety requirements onsite.
as regards to skills of operation personnel, high requirements for material quality, interlayer
contamination, recycled material can be contaminated, human and machine safety issues.
Further research is needed to quantify the findings explained in this paper. Further research is also
needed to assess the reliability of the findings.
REFERENCES
ABB Robotics, 2018. Product specification IRB 6700. Västerås, Sweden: ABB AB, Robotics.
Abela, A. V. & Shea, R., 2015. Avoiding the Separation Thesis While Maintaining a Positive/Normative Distinction.
Journal of Business Ethics, 131(1), pp. 31-41.
Asprone, D., Auricchio, F., Menna, C. & Mercuri, V., 2018. 3D printing of reinforced concrete elements: Technology
and design approach. Construction and Building Materials, Volume 165, pp. 218-231.
Bommer, M., Gratto, C., Gravander, J. & Tuttle, M., 1987. A Behavioral Model of Ethical and Unethical Decision
Making. Journal of Business Ethics, 6(4), pp. 265-280.
Bryson, J. R. & Lombardi, R., 2009. Balancing product and process sustainability against business profitability:
sustainability as a competitive strategy in property development process. Business Strategy and the
Environment, Volume 18, pp. 97-107.
European Commission, 2017. Level(s), Building sustainability performance. Conference background report. European
Union.
European Commission, 2017. Level(s): A Guide to Europe’s New Reporting Framework For Sustainable Buildings.
Ferrell, O. C. & Gresham, L., 1985. A contingency framework for understanding ethical desicion making in marketing.
Journal of Marketing, 49 (3), pp. 87-96.
Flores Ituarte, I. et al., 2016. 3D printing and applications: academic research through case studies in Finland.
Trondheim.
Ford, S. & Despeisse, M., 2016. Additive manufacturing and sustainability: an exploratory study of the advantages and
challenges. Journal of Cleaner Production, Volume 137, pp. 1573-1587.
International Federation of Robotics, 2018. Executive Summary World Robotics Industrial Robots 2018. International
Federation of Robotics.
Kajander, J.-K.et al., 2012. Market value of sustainability business innovations in the construction sector. Building
Research & Information, 40(6), pp. 665-678.
Leinonen, J., Poesche, J. & Kauranen, I., 2018. Fail No More in Industrial Automation Investment! A novel technology
success indicator model. Birmingham, International Association for Management of Technology.
Man-Fong Ho, C., 2011. Ethics management for the construction industry. A review of ethical desicion-making
literature. Engineering, Construction and Architectural Management, 18(5), pp. 516-537.
Ngo, T. D. et al., 2018. Additive manufacturing (3D printing): A review of materials, methods, applications and
challenges. Composites B: Engineering, pp. 172-187.
Perrot, A., Rangeard, D. & Courteille, E., 2018. 3D printing of earth-based materials: Processing aspects. Construction
and Building Materials, Volume 172, pp. 670-676.
Sakin , M. & Kiroglu, Y. C., 2017. 3D Printing of Buildings: Construction of the Sustainable Houses of the Future by
BIM. Energy Procedia, Volume 134, pp. 702-711.
Stead, E., Worrell, D. & Stead, J. G., 1990. An integrative model for understanding and managing ethical behavior in
business organisations. Journal of Business Ethics, 9(3), pp. 233-242.
Suhendro, B., 2014. Toward green concrete for better sustainable environment. Procedia Engineering, Volume 95, pp.
305-320.
Tekniikka&talous, 2017. Tekniikka&talous/innovaatiot. [Online]
Available at: https://www.tekniikkatalous.fi/innovaatiot/pelkka-valukone-vai-3d-tulostin-imatralaisen-
yrityksen-betonielementteja-pursottava-laite-pysyy-mysteerina-6651365
[Accessed 28 10 2018].
Tekniikka&talous, 2017. Tekniikka&talous/tekniikka. [Online]
Available at: https://www.tekniikkatalous.fi/tekniikka/imatralla-rakennettiin-maailman-suurin-
sarjatuotantoon-tarkoitettu-3d-tulostin-alkaa-valmistaa-betonielementteja-taloihin-6648842
[Accessed 24 11 2018].
The European Parliament and the Council of the European Union, 2010. Directive 2010/31/EU of the European
Parliament and of the Council of 19 May 2010 on the energy performance of buildings. Official Journal of
the European Union, L153, Volume 53, pp. 13-35.
Toor, S.-u.-R. & Ofori, G., 2009. Ethical Leadership: Examining the Relationships with Full Range Leadership Model,
Employee Outcomes, and Organizational Culture. Journal of Business Ethics, Volume 90, pp. 533-547.
Tow, D. & Loosemore, M., 2009. Corporate Ethics in the Construction and Engineering Industry. Journal of Legal
Affairs and Dispute Resolution in Engineering and Construction, 1(3), pp. 122-128.
Trevino, L. K., 1986. Ethical decision making in organizations: a person-situation interactionist model”. Academy of
Management Review, 11(3), pp. 601-617.
UN Environment and International Energy Agency, 2017. Towards a zero-emissions, efficient and resilient buildings
and construction sector. Global Status Report 2017.
United Nations, 2015. Paris Agreement, United Nations.
United Nations, 2018. The Sustainable Development Goal 2018, New York: United Nations Statistics Division.
UPM, 2018. A 3D Printed Bridge: Naturally with UPM Formi. [Online] Available at: https://www.upmbiofore.com/
biocomposites/a-3d-printed-bridge-naturally-with-upm-formi/ [Accessed 25 11 2018].
Wangler, T. et al., 2016. Digital Concrete: Opportunities and Challenges. RILEM Technical Letters, Volume 1, pp.
67-75.
Vee, C. & Skitmore, M., 2003. Professional ethics in the construction industry. Engineering, Construction and
Architectural Management, 10(2), pp. 117-127.
Wempe, B. & Frooman, J., 2018. Reframing the Moral Limits of Markets Debate: Social Domains, Values, Allocation
Methods. Journal of Business Ethics, 153(1), pp. 1-15.
Zavadskas, E. K. (2010). Automation and Robotics in construction: International research and achievements. Automation
in construction (19), 286-290.
Zhang, X. et al., 2018. Large-scale 3D printing by a team of mobile robots. Automation in construction, Issue 95, pp.
98-106.
Abstract
A large number of manufacturing processes require water and air for various application. In certain processes like
close circuit cooling of compressors and the overflow of drinking water can be prevented to reach the drain. This
water does not contain any toxic waste or effluent. This water can be treated with a natural, low cost method and
can be reused for gardening. In case treated water is not required for gardening than the treated water can find way
to STP to reduce the load on STP. The naturally treated water by this natural process under study may increase the
STP capacity without any additional cost, since the impurity gets reduced.
A pilot project to improve the water Quality was designed. The test results indicate that a traditional method
of settling tank, various filter bed of charcoal, sand, pozzolana and reed bed improve the Quality of water for
horticulture of oxygen rich plants. The pH of treated water also remains within prescribed norms. The TDS, chloride
and hardness content of treated water was found lower by 7.5%.12.5% and 12.1% respectively when compared to
input was in the range of 7- 12 %. With these test results this facility was scaled up for treating 20 KL water.
Lotus (Nelumbo nucifera Gaertner) plants can tolerate acidic and alkaline water in a pond Investigations have
also revealed that lotus can absorb heavy metals and may be recommended for plantation in the ponds used for
discharging the industrial effluents for water purification in a most natural manner. With this idea, the treated water
was kept in a lotus pond to examine whether plants can grow in the treated water. Further the treated water was used
to irrigate saplings of the plants who consume CO2 even in dark hours. This mitigate CO2 imbalance. The plantation
needs can be calculated on the basis of such plants which release oxygen continuously and can be grown in such
land which is not suitable for agriculture. To achieve zero discharge of water in industry a combination of treating
water in a natural manner and growing Neem, Peepal, and Tulsi can be implemented in manufacturing units where
air and water both are used as an input. This application can also be an answer to sanitation near hand pumps where
the excess and unused water flows without any significant treatment cost.
Keywords: Air and Water Regeneration, Natural Method, Low Cost
1. Introduction
Water is an input to manufacturing industry. Literature review that the natural herbs (1,2) facilitate
purification of water. In this paper the application of natural herbs and plant species in purification
of Industrial nontoxic water has been taken up as a pilot project. For this purpose, the overflow of
the drinking water, hand was facilities and cooling water were collected separately, which otherwise
would get into waste water stream. Flow of this water was channelized into the pilot project through
concrete drain. The quantity of such water could amount to 7-10 KL per day in continuous process
plant operating with a large work force. As is basis this water not suitable for horticulture or even
any non domestic use. This water can be treated and regenerated with natural, low cost and simple
process. The purpose of this study was to establish the uses of plant species in water purification. A
scheme was designed to experiment with the waste water quality to make it suitable for horticulture
only and not for potable domestic use.
2. Methodology
The quantity of waste water was estimated and found to be about 20 KL/day. Accordingly, the
facility was designed for treatment of 20 KLD of waste water with a potential l to hold up to 32 KLD
of water. The collected and channelled into a series of pits called settling chamber, charcoal filer
bed, stone filter bed, pozzolana filter bed and Lotus pond. The dimensions of particular chambers
are given in drawing no. 1.
pathogenic organisms. Earthworms have also been found to inhabit Phytoridal beds, and assist with
the breakdown of organic matter and solids. Thus the waste water was directed to enter and flow
through settling tank, charcoal filter bed, sand filter bed, calcined clay pozzolana filter bed and then
into reed bed trench. Finally, the treated water gets into Lotus pond. Lotus (3) (Nelumbo nucifera
Gaertner) plants can tolerate acidic and alkaline water in a pond (4)Investigations have also revealed
that lotus can absorb heavy metals and may be recommended for plantation in the ponds used for
discharging the industrial effluents for water purification in a most natural manner. In this pond
with a size of 4x4X1 Meter the locally available lotus with white flower and purple flower varieties
(Nymphet&Nymphaea nouchali) are planted. These are the floating plant species. The arrangement
of water flow is regulated by organising a balance through overflow and horticulture requirement.
5. Finding
The experimental results are shown in the Graph 1,2,3 and 4 and the average, minimum and
maximum has been tabulated in Table 1.
Table 1: Minimum, Maximum and Average Value of Inlet and Outlet Water of Lotus Pond
Total Dissolve Solid (TDS) 2000 (mg/Lit) 491 441 910 844 693 644
Suspended Solid -- 32 25 80 56 56 41
The improvement in water quality treated by this method for Hardness, chloride and TDS has been
calculated and is as given below.
(a) Hardness – 12.1%
(b) Chloride – 12.5%
(c) TDS – 07.3%
The test result of inlet and outlet water samples were drawn and sent for testing to M/s ECOMEN
LABORATORIES PVT LTD.
The results are shown in Table No.2 and as per general standard rules (G.S.R)
Before
Except Nitrate Nitrogen all parameters were within limit. To reduce the nitrate content additional
plantation in 24Mx1M has been done before settling tank at the entry as shown in the drawing No.2.
In this 24 square meter 108 number of Elephant Grass has been planted. Along the periphery Tulsi
sapling also are planted. The seed of Tulsi are known for improving water quality.
Drawing 2: Schematic Repesentation of Pilot Project of Natural STP to Reduce Nitrate Content
6. Contribution
The outlet water quality confirms the suitability for horticulture. As per IS 10500 for these 4
parameters namely pH, suspended solid, TDS & Hardness and can be used for plantation. To achieve
zero discharge of water in industry a combination of treating water in a natural manner and growing
Neem, Peepal, and Tulsi can be implemented in manufacturing units where air and water both are
used as an input. This application can also be an answer to sanitation worries near hand pumps
where the excess and unused water flows unused. This treatment method could be upgraded and
adopted as there is no significant treatment cost involved in this. To sustain this effort the treated
water would be subjected to continuous testing. Based on first cycle the design has been improved
by additional tank at the inlet point. A provision of submersible or mono block pump has been done
for horticulture need. From time to time the silt and sludge will be removed, dried and will be burn
in Cement Kiln.
References
Wankhade, R.R , Role of some Natural Herbs in Water Purification , IOSR Journal of applied Chemistry, Volume 9,
PP 38-39 (March – 2016)
Chauhan, Shweta, Gupta K.C and Singh Jyoti (2015), Purification of Drinking Water with the application of Natural
Extracts, Journal of Global Biosciences, Volume 4, P.P 1861 – 1866 (2015)
Goel, A, Sharma,S.C. and Sharga,A.N. , (2001) The conservation of the diversity of Nelumbo (Lotus)at the National
botanical research institute, Luckhnow, India, BCG News Volume 3 Number 6.
The use of reed beds for the treatment of sewage and waste water from domestic households, Lismore city council –
(May 2005)
Abstract
The amount of solid waste is growing In Egypt. It is estimated to be 20 million tons annually according to the
Ministry of environment forecasts. The typical competence of collection in urban areas signifies 40 – 80%, although
the middling proficiency of assortment processes and transport in rustic areas signifies 40 % which is considered
hazardous for communal health and environment deprived of handling solid waste in integrated framework for
solid waste management system. The reprocessing and treatment procedures in Egypt represent about 9.5 % of
the entire urban solid waste, which is considered a low proportion of waste. The final disposal of waste in most
cases are uncontrolled and administered arbitrary landfills making them self – ignition which is so harmful to the
environment. Only 5 % of the waste is predisposed in hygienic and safe landfill that preserves underground water
at present time, almost all human industries comprise the usage of polymeric materials. Nevertheless, polymers
and their residuum are confined for a long time in the environment, prompting a substantial quantity of ecological
harm. Throughout previous years a figure of solid waste management technologies has been executed in numerous
developing nations around the world, not only to implement new forms of economic and social development for
the product but also consider their environmental impact. The project proposes a green value chain innovative
waste management system to produce biodegradable plastics. The waste management system starts from collection
of coffee and cotton waste, their transportation to treatment, segregation, storage and finally manufacturing PLA
polylactic acid based on sustainable environment and technology involvement initiative. Thereby, this paper
pursues to progress contemporary, biodegradable polymeric resources with the usage of renewable raw materials
such as agriculture waste in Egypt. As technology started to impact in all life sciences and industries, it is not
astonishing that Internet of things is in progress in the field of waste management and recycling industries, toward
sustainability. The advanced mechanical segregation process established in this study uses agriculture waste with
superior cost and production efficiency, with no harmful environmental influence. In order to get the appropriate
data about waste and the feasibility of producing PLA from it, the methodology for this research is mainly based
on Desktop research from Egypt Knowledge bank search engine using the following searching keywords ( waste
management globally, suitable development and waste, Egyptian cotton production), and structured interviews
that consists of specific questions to collect the required data from targeted interviewees in the field of waste
management. There are promising results that revealed that PLA can be produced from agricultural cotton waste,
coffee waste and food waste. It is then used to produce plastic utensils (plates- forks -boxes) using additive
manufacturing and injection molding manufacturing techniques. The rising attention in sustainability and climate
crisis concerns initiates the market demand for environmentally friendly plastics.
Keywords: Bioplastic, Polylactic Acid (PLA), Economic Feasibility, Waste Management, Technology, Sustainable
Development
1. Introduction
Currently, Plastics are an essential part of many industries. They play an important role in providing,
defending, and distributing high-quality products in every market segment to consumers around
the world. Today, there is a bioplastic alternative for almost every conventional plastic material
and corresponding applications. Bioplastics–plastics that are bio-based, biodegradable, or both –
have the same or similar properties as conventional plastics but offer additional benefits, such as
reduced carbon footprints, better functionalities, or additional waste management options, such as
organic recycling. Bio-based plastics have the unique advantage over conventional plastics, which
is reducing the dependency on limited fossil resources and reducing greenhouse gas emissions.
Currently, bioplastics represent 1% of 320 million tons of plastic produced annually. But as demand
is rising and with more sophisticated materials, applications, and products emerging, the market is
growing dynamically. The European Commission has recognised the essential role of bioplastics
in the bio economy and their potential to accelerate the transition to a circular economy. PLA is
considered one of thermoplastics for general packaging applications and has been introduced into
the market. However, PLA is more difficult to degrade than other biodegradable plastics (Europian
bioplastics, 2017).
Lactic acid, or 2-hydroxypropionic acid (CAS 50-21-5), is the most widely occurring
hydroxycarboxylic acid. It is a weak organic acid with a hydroxyl group and a carboxylic group
present on adjacent carbon atoms in the carbon chain. It is the monomer of PLA. Its duality in
structure allows it to react either as an acid or as an alcohol (Anil Mahapatro, 2011). There are two
optical isomers of lactic acid: L (+)-lactic acid and D (–)-lactic acid. Although racemic DL-lactic
acid is always produced by chemical synthesis from petrochemical resources, an optically pure L
(+)- or D (–)-lactic acid can be obtained by microbial fermentation of renewable resources when
the appropriate microorganism that can produce only one of the isomers is selected. The selected
microorganisms can convert glucose and other sugars into organic chemicals. Pre-treatment and
hydrolysis are often carried out at high temperatures in presence of acids and mostly followed by an
enzymatic treatment to improve the release of mono sugars, such as glucose and xylose (Bhowmik &
Patil, 2018) In recent years, the demand for lactic acid has increased considerably because of its use
as a monomer in the preparation of poly lactic acid (PLA) (Wee, 2006). Global lactic acid demand
was estimated to be 714.2 kilo tons in 2013, and it is expected to grow annually by 15.5% to reach
1,960.1 kilo tons by 2020 (Brigit Kamm,2016).
The main objective of the project is to replace the harmful petroleum plastic with PLA by creating
a collection model for cotton waste fibers and coffee waste from the waste sources and landfills,
followed by simulating a transportation model for the waste from waste sources to the Lactic Acid
Production Facility, followed by a study of the production process of Lactic Acid through three main
phases which include collection and segregation of solid wastes, treatment of wastes to produce
lactic acid followed by manufacturing of poly lactic acid.
Cotton fibres are the purest form of cellulose, nature’s most abundant polymer. Nearly 90% of
the cotton fibers are cellulose. Cotton fibers are composed of mostly a-cellulose (88.0–96.5%).
Moreover, spent coffee grounds (SCG), discarded after brewing, contain a high proportion of
carbohydrates of 45% (polysaccharides and monosaccharides) plus lignin and polyphenolics ( Hsieh,
2007). On an average, about 650 kg of SCG is produced by manufacturing from one tone of green
coffee. Instant coffee is gaining popularity, especially in Asia and the Middle East, so the production
of instant coffee is likely increase. Hence, there is a necessity to find fermentation technologies to
convert these two organic wastes into chemical building blocks, such as lactic acid (LA). (Solange
I. Mussatto, 2011)
2. Methodology
2.1. Cost Estimation of the Collection and Transportation of Cotton and Coffee Waste
The first phase of PLA production is collection of cotton and coffee waste. Cotton waste collection
is mainly depending on two main sources which are the wastes from agriculture and textile industry.
Cotton planting in Egypt is divided demographically into three main areas: cotton in Lower Egypt
named (Giza 86, Giza 88, Giza 87, Giza 93, Giza 94 and Giza 96), and cotton in Upper Egypt named
(Giza 90, Giza 95). According to this deviation of cotton planting cotton found in Lower Egypt (Giza
86) is ranked the first in planted area season 2016/2017 as it reached about 35671 hectares (65.80%)
of the whole production of cotton. Moreover, textile industry represents 25 % of Egypt economy,
consequently it generates tremendous amount of waste annually, this waste is either terminated to
public waste stations with other types of waste of collected by textile waste agencies such as EMCO,
Atlas for trading, Tabouk for trade, Walid co for trade. A transportation model for the transportation
of cotton waste has been made in order to determine the quantities as well as the costs of transporting
cotton waste from both agricultural and textile industries.
As per table 1 shown below, El-Behyra, Kafr El-shiekh and El-gharbya governorates rank first in the
amount of Giza 86 cotton harvested annually with 303484, 107159, and 21837 Tons respectively.
These governorates are, thus, expected to generate the highest amounts of waste annually and
the intension is to depend on these three governorates as the main sources of cotton waste from
agriculture. The waste generated annually is expected to be 1% of the harvested amounts shown
above.
Table 1: Cotton 86 Production in Lower Egypt
El-Behyra 303484
El-gharbya 21837
El-Monofya 12676
El-Noubaria 10228
Alexandria 9002
Qalyub 379.5
Source: Cotton Arbitration & Testing General Organization (CATGO) Information & Documentation Center
The second source of cotton waste is generated from the textile industry. After a thorough market
research, it was found that there are four main textile waste collection companies which are (EMCO
group, Atlas for trading, Tabouk for trade, Walid co for trade). EMCO group was very helpful in
the data collection phase and they provided us with many data about the collection process in their
facility through interviews. The informal agreement was to collect 2 Tons of cotton waste every
two-months period.
The second waste stream is coffee waste which is going to be collected from the biggest coffee
chains in Cairo (Starbucks, costa and cilantro). A transportation model was made for the coffee
waste collection from these coffee chains to the facility location. Daily collection process has been
chosen as coffee is an organic element that loses its value relatively quickly. On-spot treatment is
needed in order to avoid any inconvenience risks. Shipping cost in this model is calculated based on
the number of kilometres between the source (coffee shops) and the location facility.
A waste conveyor system is used in the facility together with forklifts that aid the collection and
separation of waste in the production facility. Coffee waste is being received on daily basis, which
puts a priority for the utilization of coffee waste in the operations. Cotton waste, on the other hands,
is more seasonal in terms of collection, and can be stored for a much longer period of time.
mechanical stirring to remove grease and wax. Coffee pulp pre-treatment was also performed to
calculate the correct cost for the process, the material was grounded using a cutting mill then roasted
ground coffee were infused in distilled water. This step was followed by obtaining microorganisms
for the fermentation process needed to transfer waste into lactic acid. Chemical hydrolysis was
done to convert the carbohydrate components into their constituent sugars or breaking down
cellulose into smaller polysaccharides or completely into glucose units. This step was followed
by fermentation and the optimum time for producing the highest concentration of lactic acid was
determined via HPLC (High Performance Liquid Chromatography). The final step of Lactic acid
extraction was done by separating it from water by adding calcium hydroxide and left to dry in the
oven. Finally, Statistical analysis was implemented to find the optimum conditions to produce lactic
acid including temperature, pH, incubation period, rpm using analysis of variance and Taguchi.
HPLC characterization was also performed several times to determine the effect of the predominant
microorganism with the parameters mentioned to produce the highest concentration of lactic acid.
The cost of treatment of waste and extraction of lactic acid includes specific machines (refrigerator,
pH Meter, fermenter, autoclave, centrifuge, and an incubator), personnel, and chemicals for the
treatment of waste. It is a lengthy process that requires several testing techniques in each step. The
lactic acid produced is tested for purity and quality in order to insure the required quality of our
products using chemical elemental analysis.
2.3. Cost Estimation of Fabrication of Polylactic Acid (PLA), Fibers, Pellets, and Filaments
Figure 1 illustrates the production phases of poly lactic acid. Polymerization (chemical step) of
lactic acid is required for the production of PLA pellets (which are used a raw material for injection
molding machines). The cost estimation of the different forms of PLA is calculated based on the
estimation that 20 % of the produced pellets are transformed to fibers (used as a raw material for
composite manufacturing), 20 % are transformed to filaments (used as a raw material for solid 3D
printing), 20% are transformed to liquid PLA (used as a raw material for liquid 3D printing). 40%
will be left as solid PLA pellets, and transferred directly to the final products manufacturing phase.
The final plastic products such as plastic utensils, packages are produced using either injection
moulding or 3D printing technologies.
The first process in this step is the transformation of lactic acid, by polymerization, into polylactic
acid (PLA). In order to complete the polymerization, the chemical catalyst “Stannous Octate” is used
in order to support the chemical reaction. This process requires an oven as the chemical reaction
requires heating, chemicals, glassware, and a heat transfer fluid. At the end of the polymerization
process, it was assumed that the wastes resulting from this phase of the process are minimal. 40% of
the PLA pellets is moved directly to the production of final products, 20% is transferred into plastic
filaments using an Injection moulding machine, 20% is transferred into PLA fibres using an electro-
spinner, and 20% is dissolved to produce liquid PLA. The injection molding machine is also used
in another phase for the production of final plastic products from PLA pellets. A mixer, and a twin-
extruder is used to produce PLA products with different sets of properties according to the market
needs, and the additives that needs to be added in this process.
3. RESULTS
The location has been chosen to be Abo-Rawash for various reasons, but most importantly for the
relative cost per square meter of land purchased, which is more economic than choosing the facilities
in Noubaria and Sadat Industrial zones. Furthermore, Abo Rawash Industrial area is in the suburbs
of Giza governorate, which means that the facility is be close to the coffee shops in Cairo, as well as
cotton waste from agriculture in Lower Egypt. In the table below (table 3), the detailed costs of land
in each of the three industrial zones is shown. It is estimated that building costs is equal 1000000 L.E.
Table 3: Facility Price and Location
Finally, for coffee waste shipping, the intention is to ship from 69 branches in Cairo, each branch
generating around 100 kg of coffee waste per day as per an interview with one of the branch
managers working for Clintro. As shown in (table 4), the amount of waste generated on monthly
basis is estimated to be 207 Tons of coffee waste, costing 2700 L.E. in the shipping process.
Table 4: Coffee Waste Amounts and Respective Transportation Cost
Estimated Monthly Cost of Shipping
Shop Name Branches in Cairo Dailyamount Collected
Amount Collected Per Month
Starbucks 24 2400 KG 72000 KG 900 LE
The total amount of cotton and coffee waste collected is expected to equal 568.5 Tons per month
(after averaging the amounts of cotton waste on 12 month for convenience in future calculations).
The total transportation cost is expected to equal 65700 L.E. for both waste materials. The estimated
price of collection of each Ton is estimated to equal 100 L.E. per Ton, which equals 56850 L.E.
Therefore, the estimated total cost of the collection and transportation of waste is 122,550 L.E. for
568.5 Tons of waste.
Below are all the assumptions that have been taken into account in this process:
●● Cotton production is be equal to the historical numbers mentioned above
●● All waste materials purchased cost 100 L.E. per Ton of waste
●● Cotton harvest season is between November and February of every year
●● Cotton waste from agriculture is collected simultaneously with the harvest season
●● The amounts of coffee waste collected is not be affected by any seasonality
●● The 60 Ton transportation trucks are based on the number of shipments used.
LA Extraction Machines
Glassware 160000
The Depreciation cost is calculated as 60000 L.E. per month. Meanwhile, the operations costs have
been counted in details in (table 6). The total operations costs are 94000 L.E.
Table 6: Detailed Operations Costs of Lactic Acid Extraction
Step 2: Extraction of Lactic Acid Total Monthly Cost in L.E.
Chemicals 32000
Plastic bags for packaging 2000
Testing Technique 60000
Total Extraction Monthly Cost 94000
With the depreciation monthly cost at 60000 L.E. and the operations costs at 94000 L.E. in addition
to 122550 L.E. accumulated from the previous step of waste collection and transportation, the total
cost by the end of the Lactic Acid extraction phase equals 276,550 L.E., which means that 1 ton of
lactic acid powder costs the total of 768.19 L.E, that is without including the costs of labour directly
and indirectly taking part in the production of lactic acid.
Below are all the assumptions that have been taken into account in this process:
●● The amount of lactic acid extracted from waste materials has a yield of 60%
●● The costs of the machines are estimated based on the market price
●● The machines included in the project is be sufficient for the production on an industrial scale
●● The monthly depreciation cost of the machines is estimated to equal 60000 L.E.
3.3. Estimated Cost of Fabrication of Polylactic Acid (PLA), Fibres, Filaments, and Pellets
This step is relatively lengthy; it starts by polymerization of the 360 Tons of Lactic Acid transformed
to 360 Tons of PLA pellets. This step requires an additional investment in machines shown in
(table7). The total investment cost related to the fabrication of PLA Pellets is 184,000 L.E.
Table 7: Investment Cost of PLA Polymerization
Polymerization Equipment Price L.E.
Glassware 160000
Oven LG MC 8048WR (4) 24000
Total Cost 184000
The operations costs have been estimated to equal 56000 L.E. per month, including 3000 depreciation.
The detailed operations costs are shown clearly in (table 8):
Table 8: Operations Cost of Lactic Acid Polymerization
Items Needed for Polymerization Total Monthly Cost in L.E.
Chemicals 32000
Catalyst: Stannous Octate 16000
Heat Transfer Fluid 8000
Depreciation 3000
Total Operations Cost of Polymerization 59000
With the operations costs at 59000, the total added costs of polymerization are 59000 L.E. In other
words, the polymerization of 360 Tons of lactic acid into PLA costs 163.89 L.E. per Ton, which
means that the total cost of producing plastic pellets is 932.08 L.E. per Ton.
For the next steps in this phase, there are additional investment costs for the production of PLA
filaments and PLA fibers, as well as additional depreciation costs, but no additional operations costs
as same raw material will be used.
The machines needed for the transformation of pellets into filaments as well as the respective
investment cost needed to purchase them is shown in (table 9). The additional investment costs
related to the production of PLA Filaments are 268000 L.E.
Table 9: Investment Cost of PLA Filament Fabrication
Machines for PLA Filaments Fabrication Investment Cost in L.E.
Injection Moulding Machine (2) 48000
Mixer (2) 200000
Wellzoom Filament extruder (2) 20000
Total Investment Cost 268000
These machines are used to produce only 72 Tons of PLA filaments. The depreciation cost is 2500
L.E., which is divided on 72 tons, thus the added cost of producing PLA filaments is 34.72 L.E.
per Ton. In other words, PLA filaments are expected to cost 966.80 L.E. per Ton. Similarly, other
machines are needed to transform PLA pellets into fibers. The details of the machines needed as well
as their respective investment cost needed to purchase them are shown in (table 10). The additional
Investment costs related to the production of PLA Fibers are 600,000 L.E.
Table 10: Investment Cost of PLA Fibers Fabrication
Machines for PLA Fibers Fabrication Investment Cost in L.E.
Electro spinner MSK-NFES-3 (4) 600000
Total Investment Cost 600000
The monthly depreciation has been calculated as 5000 L.E. per month. This is the total operating
cost of producing 72 Tons of PLA fibers; therefore, the added cost of producing PLA fibers is 69.44
L.E. per Ton, which means that the total cost of 1 ton of PLA fibers is 1001.52 L.E. At the end of
this process, there is 144 Tons of PLA pellets fabricated for 932.08 L.E. per ton, 72 tons of liquid
PLA for almost the same price, 72 tons of PLA filaments for 966.80 L.E. and 72 tons of PLA fibers
for 1001.52 L.E.
3D printing technologies are used heavily in the production of final plastic products, except for 72
Tons of PLA pellets that will be used in producing final plastic products using injection moulding
machines. The detailed investment costs for all the machines are shown in (table 12). However,
their depreciation is be accounted separately in order to calculate the final costs for final products
produced from each of our raw material streams. The total investment cost related to final products
manufacturing is 2,268,000 L.E.
Table 12: Investment Cost for Final Products Manufacturing Machines
Investment Cost for Final Products Manufacturing Machines Investment Cost in L.E.
Injection Moulding Machine (2) 48000
Mixer (2) 200000
Wellzoom Filament extruder (2) 20000
SLA Formlabs Form 2 (4) 240000
DLP: FlyingBear Shine (4) 60000
FDM Markforged (4) 500000
SLS Sintratec (4) 400000
Gigabot X beta 3D Printer (4) 800000
Total Investment Cost 2268000
With the Injection Moulding Machine, the mixer, and wellzoom filament extruder, final plastic
alternative products are produced from 72 Tons of PLA pellets. The depreciation is also estimated
to be 2500 L.E. per month. The added cost of producing final PLA products using this technology
is also be 34.72 L.E. per ton and the cost of final products using this technology is also be 966.80
L.E per ton. The remaining 72 Tons of PLA pellets are feeding the FDM Gigabot X beta 3D printer,
which is the first 3D printer to be offered in the market with an ability to produce products from
PLA pellets. The depreciation cost is estimated to equal 6750 L.E. per month. Therefore, in addition
to 932.08 L.E. the added cost from using the Gigabot 3D printer is 93.75 L.E. The cost of PLA
products depending on PLA pellets is (932.08 + 93.75) which equals 1025.83 L.E. per Ton.The
same process is applied on both PLA filaments and PLA fibers and liquid PLA. For PLA filaments,
FDM markforged 3D Printer will be depreciated at 4500 L.E. per month. Therefore, beside the
original cost of 966.80 L.E., an additional cost of 62.5 L.E. is added. Therefore, the final cost of final
products manufactured from PLA filaments is (966.80 + 62.5) 1029.30 L.E.
For PLA fibers, the SLS Sintratec 3D Printer will be depreciated at 3500 L.E. per month. Therefore,
beside the original cost of 1001.52 L.E. per ton of PLA fibers, the depreciation cost equals 48.61
L.E. per ton. Therefore, the final cost of final products manufactured from PLA fibers is (1001.52 +
48.61) which equals 1050.13 L.E. Finally, for liquid PLA, the SLA Formlabs and DLP Flying Bear
will be depreciated for 2500 L.E. per month. Therefore, beside the original cost of 932.08 L.E., the
depreciation cost per ton is 34.72, which means that the total cost of final products produced using
liquid PLA is (932.08 + 34.72) which equals 966.80 L.E.
In the case of the final products manufacturing, the labour cost has been divided on each ton of final
products produced. The details of the labour cost are shown in appendix (1) below. But the total
labour cost was estimated to equal 275000 L.E. per month, divided on 360 tons of PLA products
equals 763.89 L.E. per Ton. In the table below, (table 13), the details of the final costs of our
products before and after adding the labor costs is shown.
Table 13: Final Products Cost
Cost in L.E. without Labor Cost in L.E. Total Cost in L.E.
Product
Labor Per Ton per Ton per Ton
PLA Pellets – Injection Moulding 966.80 763.89 1730.69
materials. On the other hand, the restraints were identified in the need for industrial composting
units, agricultural fibre alternatives, and high cost of raw materials. Furthermore, the opportunities
were identified in three prospects which are blending of PLA with other materials, production of
PLA from second-generation biomass, and rising adoption of PLA among end user industries, while
the challenge was in PLA with hygiene properties to provide safety in packaging.
Today in 2018, (Mordor Intelligence, 2018) are sharing the positive expectations on the PLA market
with the other 6 years old report. Only this time, the CAGR between 2018 and 2023 is expected to
be 20.12%. The driving force behind this rapid growth is packaging applications in the food and
beverages industry, as well as government policies support eco-friendly products including PLA.
North America is the leading region in the consumption of PLA with 35% of the global consumption.
Meanwhile, the largest growth level has been expected to be in the Asia-pacific region at a CAGR of
22.1%. (Markets Insider, 2017) announced that Research and Markets has estimated the market size
of Lactic Acid to equal $9.8 Billion and PLA to equal $6.5 billion by 2025, at a CAGR of 16.2%.
They report that companies like Unilever, Johnson and Johnson, and P&G are expected to lead the
demand in the coming few years.
4. Conclusion
Through the proposed green model, wasted materials produce a great value for the economy, by
providing the market with a green alternative for the addictive need for replacing toxic plastic
products. The costs of the final products range between 1730 L.E. and 1814 L.E. per ton, with
around 45% of the costs being labor cost. Comparatively, the current PLA price in the market is in
the range of 36000 L.E. per ton as observed on https://www.total-corbion.com. The huge difference
in price can be due to many reasons, starting from the fact that the proposed PLA is produced
from waste materials. The model provides job opportunities into the developing economy of Egypt,
providing a critical economic value in addition to the environmental value of the project. These
products have a great ability to compete with plastic products available in the market on the basis of
cost, quality, variability of applications available, and environmental friendliness of final products.
The prices of PLA pellets worldwide start from 500 USD per ton or around 8955 L.E. as per the
USD exchange prices with the Egyptian Pound. The prices of PLA Filaments commonly used in 3D
printing applications can go as high as 3000 USD per ton, which is incomparable to our minimal
costs. This model provides a competitive advantage in terms of cost, which predicts the long-term
sustainability of the project, in terms of cost leadership strategies. In other words, the model proposed
is a blue-print for the world, for green projects that can be made a value for the economy and not a
burden, especially on developing economies with relatively scarce budgets.
References
(n.d.). Retrieved November, 2018, from https://www.total-corbion.com
Allied Market Research, Polylactic Acid (PLA) Market by Application (Packaging, Agriculture, Electronics, Textiles,
Bio-Medical), By Geography (North America, Europe, Asia-Pacific, LAMEA) - Global Opportunity
Analysis and Industry Forecast, 2012 - 2020. (2012). Retrieved September, 2018, from https://www.
alliedmarketresearch.com/polylactic-acid-market
Anil Mahapatro, D. K. (2011). Biodegradable Nanoparticles are Excellent Vehicle for Site Directed in-vivo Delivery of
Drugs and Vaccines. Wichita State: Journal of Nanobiotechnology.
Bhowmik, S. N., & Patil, R. T. (2018). Application of Microbial Biotechnology in Food Processing. Crop Improvement
Through Microbial Biotechnology,73-106. doi:10.1016/b978-0-444-63987-5.00005-0
bioplastics, e. (2017). bioplastics. Germany.
Brigit Kamm, Microorganisms in Biorefineries, Springer Berlin (Kamm, 2016)
Cakir, S., Aycicek, M., & Akinci, A. (2018). Investigation of the mechanical and physical properties of PLA produced
by injection molding for matrix material of polymer composites. Materials Science, 2(1), 1.
Egypt State of the Environment Report 2009. (n.d.). Ministry of State of Environmental Affairs in Egypt.
Egypt Today. Environment Ministry to implement new waste management system in Cairo. (2018, May 31).
Embaby, Z., El Deheemmy, A., Kotb, A. A., & El Roby, E. T. (2013). ECONOMIC AND ENVIRONMENTAL
EFFICIENCY OF EGYPTIAN COTTON PRODUCTIVITY. Journal of Agricultural Economic and
Social Sciences, Mansoura University, 4(1), 1-25. Retrieved September, 2018, from http://srv5.eulc.edu.
eg/eulc_v5/Libraries/UploadFiles/DownLoadFile.aspx?RelatedBibID=ZjA1ZGFiMGUtYzc2NS00NDc4
LWEzNWMtY2ZmYzI0ZmY1YmFjX2l0 ZW1zXzEyMTkwMjc1XzM1Mjg2OV9f&filena me=555.pdf
EPEMA Industry Profile. (2009). Retrieved September, 2018, from http://www.epema.org/industry_profile.aspx
Eriksen, M., Lebreton, L. C., Carson, H. S., Thiel, M., Moore, C. J., Borerro, J. C.,... & Reisser, J. (2014). Plastic
pollution in the world’s oceans: more than 5 trillion plastic pieces weighing over 250,000 tons afloat at sea.
PloS one, 9(12), e111913.
FAO, Save FOOD: Global Initiative on Food Loss and Waste Reduction. (2018). Retrieved from http://www.fao.org/
save-food/resources/keyfindings/en/
Hsieh, Y.I. (2007). Chemical structure and properties of cotton, DOI, 10.1533/9781845692483.1.3
Ibrahim, M. I. M., & Mohamed, N. A. E. M. (2016). Towards sustainable management of solid waste in Egypt. Procedia
Environmental Sciences, 34, 336-347.
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A.,... & Law, K. L. (2015). Plastic waste
inputs from land into the ocean. Science, 347(6223), 768-771.
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010). Poly‐lactic acid: production, applications,
nanocomposites, and release studies. Comprehensive Reviews in Food Science and Food Safety, 9(5), 552-571.
Lipson, H., & Kurman, M. (2013). Fabricated: The new world of 3D printing. John Wiley & Sons.
Market Insider, $9.8 Billion Lactic Acid Market, 2025 - Research and Markets. (2017, June 26). Market Insider.
Retrieved September, 2018, from https://markets.businessinsider.com/news/stocks/9-8-billion-lactic-acid-
market-2025-research-and-markets-1002123948
Mcdonald, C. (2014). Https://www.dropbox.com/s/bwxhwldvyta6i3x/CSEIT_2015_Proceedings_Paper_18.pdf?dl=0.
6th Annual International Conference on Computer Science Education: Innovation & Technology (CSEIT
2015). doi:10.5176/2251-2195_cseit15.30
Mordor Intelligence, Bio-Polylactic Acid (PLA) Market - Segmented by End-user Industry and Geography - Growth,
Trends, and Forecast (2018 – 2023). (2018, May). Retrieved September, 2018, from https://www.
mordorintelligence.com/industry-reports/bio-pla-market
Rathod, V., Hwang, Y. H., Hussain, N. T., & Uifalusi, B. (2015). An investigation into UBC plastic cutlery and
alternatives.
Rochman, C. M., Browne, M. A., Halpern, B. S., Hentschel, B. T., Hoh, E., Karapanagioti, H. K.,... & Thompson, R. C.
(2013). Policy: Classify plastic waste as hazardous. Nature, 494(7436), 169.
Salah, H. (2017, December 3). !»تايافن« دروتست رصم ريودتلا ةداعإ عناصم ىف رملا عقاولاAhram, 47844.
Serra, T., Planell, J. A., & Navarro, M. (2013). High-resolution PLA-based composite scaffolds via 3-D printing
technology. Acta biomaterialia, 9(3), 5521-5530.
Solange I. Mussatto (2011). Production, Composition, and Application of Coffee and Its Industrial Residues. Food
Bioprocess Technol (2011) 4:661–672 DOI 10.1007/s11947-011-0565-z
Srivastava, G., & Srivastava, P. (2017). Applications of Environment & Health Friendly PLA-Composite Film for
Active and Smart Food Packaging.
Tchobanglous G, Kreith F. Handbook of Solid Waste Management. 2nd ed. New York, USA: McGraw-Hill; 2002.
Timeforchange.org (2009). Plastic bags and plastic bottles - CO2 emissions during their lifetime. Retrieved September
24, 2018
Urban Environment Report 2012 (Rep.). (2012). Retrieved September, 2018, from EEAA website: http://www.eeaa.gov.
eg/portals/0/eeaaReports/SoE2012En/PART (4) URBAN ENVIRONMENT/chapter 11.Solid Waste.pdf
WEE Y.G.et al: Biotechnological Production of Lactic Acid, Food Technol. Biotechnology. 44 (2) 163–172 (2006)
Youm7.com. (2017, June 7). Retrieved October, 2018, from https://www.youm7.com/story/2017/6/7/ /3271569
Appendices
Appendix 1: Detailed Labor Costs
Mohd. Zuber
Saudi Electronic University, Department of Public Health,
College of Health Sciences, Kingdom of Saudi Arabia
E-mail: zubermohd786@gmail.com
Mohd. Juned
National Institute of Industrial Engineering, Mumbai,
Department of Decision Sciences, India
E-mail: Mohd.juned011.2017@nitie.ac.in
Praveen G.
National Centre for Disease Control, Delhi,
Central Surveillance Unit, IDSP, India
E-mail: praveenidsp@gmail.com
Abstract
In India, the operation of public health system is hampered by quality and accessibility of the available data
collected at various sites across the country. Effective implementation of health programs like National Health
Mission (NHM) is a big challenge for the Indian government as well as public health professionals because it’s
very difficult to monitor each and every activity at ground level due to lack of skilled human resource. There are
various health programs on Disease Surveillance, Family Planning, Reproductive and Child Health, Vector Borne
Diseases, Iodine Deficiency Disorder, Leprosy, Blindness, HIV/AIDS and Tuberculosis under NHM governed by
separate divisions in the Union Health Ministry, India. Data is published separately by these divisions and made
available to officials for the response, action, planning and policy making. In this paper, we introduce a technology-
driven model of strengthening public health activities through the Internet of Things (IoT) in India by providing
data on public health activities at one place. This would help to monitor the activities at different levels of the
healthcare system and respond in a timely manner. Implementation of IoT through installation of sensors across
Primary and Community Health Centers (PHCs and CHCs), District and Specialized Hospitals and Government
Medical Colleges to maintain the routine data collected on the health activities under different national programs.
This would consequently transmit the data to the centralized server of Central Ministry of Health & Family Welfare,
India where data would be processed and provide information so that the trends of diseases across the country could
be understood in a timely, effective and clear manner. This would help the ministry officials and public health
professionals to prioritize the situation and take necessary steps.
The proposed technology framework is a large chain of smart equipments where the entered data can be stored
and processed. The devices then transmit the data for analysis to the main server of the Central Health Ministry to
provide alerts on the trends of diseases in a timely manner. After the observation of disease trends,the necessary
steps of mitigation and prevention across the nation could be taken. This would also facilitate to inform the people
during a natural disaster. IoT would help to identify few hidden factors that would be a responsible for effective
implementation or hinder the program process. Considering the present situation in India, the IoT based Smart
disease surveillance system (SDSS) would be a considerable intervention in the field of Public Health. In the current
situation, data is reported on weekly interval and the national health officials dependent on the local health units for
the reports. This type of smart device system would change the scenario of data reporting and decrease the burden
of the district and the state health officials by registering with the Central Health Ministry server for the IoT based
smart device and timely update their records and reduce the under-reporting of cases.
Keywords: SDSS, Internet of Things, Public Health Activities
1. Introduction
The Central Health Ministry, Government of India requires continuous disease case reporting
to be aware of various diseases occurring in the population which can be prevented and timely
controlled and consequences of the disease can be limited. Presently, in India data on epidemic
prone diseases is collected on weekly basis from reporting units such as sub centers (SCs), PHCs,
CHCs, government and private sector hospitals and medical colleges. Mostly, after the verification
of an outbreak from the local sources, the health officials respond. Usually, the number of disease
cases increase in this time period from report to verification and action. The proposed framework of
Smart Disease Surveillance based on IoTs would increase the efficiency of the disease surveillance
system by identifying the trends of various diseases promptly. The large network of smart devices
can process and analyze the entered data. The devices then transmit the data to the main server
located at the Central Health Ministry where after analysis the disease patterns of all the states would
be available to the health officials and public health professionals. The State Department of Health
would have access for alerts to their respective districts from the central server. The officials would
be alerted about the occurrence and spread of disease and timely necessary actions could be taken
for prevention and control across the nation and globally. This may facilitate the common people to
be aware about the disease in it’s initial stage.
2. Literature Review
Food safety is essential to avert food borne diseases and to ensure the well being of public. The
maintenance of freshness of food and their wastage can be avoided by constant monitoring of
perishable food products and early detection of their degradation to minimise the loss. In this aspect,
supervision of fruits during transportation from field to shelf can safeguard their quality. In this
respect, a wireless sensor network (WSN) was designed to observe the fruits during transportation
and after storage. IoTs was also used for facilitating the online monitoring of fruits from any remote
location. Sensor and gateway nodes were used in the form of Raspberry pi. It was used for sensor
data processing and decision making and data from the node was transmitted using Wi-Fi (IEEE
802.11) protocol. It executed the fusion of sensor data such as temperature, humidity and moisture
to avoid unnecessary data storage and increase the efficiency of decision making. Further the
freshness of fruits was communicated to avoid loss due to transportation. (Chanthini, Manivannan,
Umamakeswari, 2017)
An IoT can accurately track people, equipments, specimens, supplies and analyze the collected
data. Patients are attached to various sensors for measurement of vital signs and other biometric
information so that rapid diagnosis and better quality of care can be provided. (Philip A laplante,
Nancy Laplante, 2016)
Internet is an essential means to recognise the secure, competent and excellence of medical
monitoring and management by the adoption of RFID and various other electromagnetic sensors
which can attain smart health monitoring and their specific geographic location. IoT delivers ease
to hospitals in patient monitoring and tracking management. (Yu Liu, Beibei Dong, Benzhen Guo,
Jhinjing Yang, Wei Peng, 2015)
Disease Control and Prevention (CDC), now report cases and deaths from significant diseases within
days and sometimes within hours of the occurrence. Further, there is considerable public pressure for
the accurate and timely availability of information. Formal reporting of notifiable infectious diseases
is a requirement placed upon healthcare providers by the state and national governments, and upon
national governments by the World Health Organization.
Patients
RFID Inbuilt
Health
Monitoring
Equipments
Figure 1: IoT based Proposed Framework for End-To-End Access of Grass Root Level Public Health Data
4. Need in India
Disease surveillance is necessary for health system for early detection of outbreaks, to measure
disease burden, changes in morbidity and mortality patterns and well-timed implementation of
preventive and control measures. In 1990, WHO aided and supported evolvement of integration
of surveillance functions of most of the categorical disease control based on collected evidences in
Asia and Africa. Disease surveillance in India has always been practiced by the states (health being
a state subject). There are many gaps which differ in degree and quality of surveillance, different
priorities in diseases and lack of uniformity across states. Information was made available at national
level only at monthly intervals.The concept of improving disease surveillance had always been
under consideration of Government of India. National Surveillance Programme for Communicable
Disease was launched in 1997 and later expanded as Disease Surveillance Project with the support
of World Bank. Following the expansion, Integrated Disease Surveillance Programme emerged as
the disease surveillance programme throughout the country and has achieved both structurally and
functionally. Surveillance units are established in all States/Districts across the country. Disease
surveillance data on epidemic prone diseases are being collected on a weekly basis from SCs, PHCs,
CHCs, hospitals including government, private and as well as medical colleges. Weekly data are
analyzed for disease trends and if there is a rising trend it is investigated by Rapid Response Team
to diagnose and control the outbreaks.
5. Conclusion
The present situation in India requires a well-organised disease surveillance system. The IoTs based,
SDSS would be a considerable development in the domain of Medicine and Technology. In the
current situation, data is reported on weekly interval and the national health officials dependent on
the local health units for the reports. This type of smart device system would change the scenario
of data reporting and decrease the burden of the district and the state health officials by registering
with the Central Health Ministry server for the IoT based smart device and timely update their
records and reduce the under-reporting of cases. The state units would have access to the reported
data at one place for their respective districts. This would lead to timely disease case reporting,
reducing under reporting and increase in data consistency. Analysis and trends about the diseases
would be available at one place that would help the Central Ministry of Health & Family Welfare
and State Department of Health & Family Welfare to take timely preventive measures and respond
to emergency situations, predict warning signals of disease and issue alerts to the citizens of India.
6. Acknowledgement
The fruitful culmination of this paper would be half-done without the naming of the people, whose
constant encouragement for research crowned this effort to success. Mohd Zuber, Author, thanks
Dr. Mohammed Al Mohaithef, Vice Dean, College of Health Sciences, Saudi Electronic University
for his moral support, guidance and suggestions for improvement in research. Mohd. Zuber, Mohd.
Juned and Praveen G, Authors, would convey their thanks to family members and friends for their
love and support.
References
A Cooperative Internet of Things (IoT) for Rural Healthcare Monitoring and Control,IEEE paper by Vandana Milind
Rohokale, Neeli Rashmi Prasad, RamjeePrasad,Center for TeleInFrastuktur, Aalborg University, Denmark.
Bulletin of World Health Organization-www.who.int/bulletin
Combination of Cloud Computing and Internet of Things (IoT) in Medical Monitoring Systems by Yu Liu, Beibei Dong,
Benzhen Guo, Jhinjing Yang, Wei Peng, International Journal Of Hybrid Information Technology, Vol. 8
No.12 (2015) pp. 367-376
Disease Surveillance in India-Indmedica- a ppt by Dr.Sampath Krishnan.
Future Internet:Internet of Things ,IEEE paper by Lu Tan and Neng Wang,Computer Science & Technology Dept., East
China Normal Univ., Shanghai, China
Integrated Disease Surveillance Project (IDSP) -idsp.nic.in/
Integrated Disease Surveillance Programme – A decade of Progress (2004-2014)
Integrated Disease Surveillance in India : Way forward Global Journal of Medicine and Public Health – Deepak K Raut,
Anil K Bhola
Perishable Food Quality Monitoring – An Internet of Things (IoT) Approach byChanthini, Manivannan
,Umamakeswari,,International Journal of Pure and Applied Mathematics, Volume No. 7 2017, 63-67
Press Information Bureau, Government of India http://pib.nic.in/AllRelease.aspx?MenuId=3
The Internet of things in Healthcare by Philip A laplante, Nancy Laplante, IEEE Computer Society, 2016
Victor Mofokeng
Department of Quality and Operations Management
Faculty of Engineering and the Built Environment
University of Johannesburg
South Africa
E-mail: 201046474@student.uj.ac.za
Nita Sukdeo
Department of Quality and Operations Management
Faculty of Engineering and the Built Environment
University of Johannesburg
South Africa
E-mail: nsukdeo@uj.ac.za
Pule Kholopane
Department of Quality and Operations Management
Faculty of Engineering and the Built Environment
University of Johannesburg
South Africa
E-mail: pulek@uj.ac.za
Abstract
The paper addresses the use of standard operating procedures as a key component to customer acquisition founded
on assessment of research papers. It illustrates the application and importance of a standard operating procedure
from different perspectives whilst emphasizing its critical relevance to customer research in small and medium
sized enterprises in rural areas. The paper depicts how standard operating procedure, if understood by rural situated
small and medium sized enterprises can be utilized as a component of a well-organized administration system,
market penetrate tool towards sceptic and sensitive customers, and a competitive strategy over market competitors.
In many small enterprises there is a basic lack of understanding as to what quality controls are necessary, let
alone how to implement them. Standard operating procedures are prescribed forms that explain how a person or
businesses perform a task. Standard operating procedures provide a step-by-step set of how-to instructions to the
person or persons performing a specific task. Each standard operating procedure should be specific enough to be
clear and understandable, but flexible enough to be useful. Standard operating procedures also define expected
practices in an industry where quality standards exist. The customer service logic perspective argues that value is
not created by the enterprise rather value is equally created by the interaction between the service or product offer
and the customer. It is for this reason, information on customer needs and on how best to serve these needs is best
obtained from customers themselves. Customers have more knowledge about the problem and service providers have
more information about the solution. This is a main prospect aimed at service providers that drift from rural areas
or semi-urban areas to urban areas. In contrast, many rural entrepreneurs are facing numerous difficulties owing to
unobtainability of principal services in rural areas of emerging republics. Absence of schooling, monetary constraints,
and inadequate practical and theoretical competence make it problematic for rural entrepreneurs to start businesses
in rural areas. This paper evaluates the national and international literature on standard operating procedures and
customer research. It identifies the different concepts that have emerged globally in standard operating procedures
and customer research. The existing literature reviewed reflects upon the development of understanding of the two
subjects and compared with the domestic literature available on the same. To build conceptual analysis various
national and international reports, articles and papers have been referred. The study indicates the importance of
standard operating procedures and brings out certain dimensions that are relevant while acquiring a new customer.
In light of these concerns, Internet influence has now transformed rural people. In rural areas adoption of internet is
in favour for firms and this influences business internet movement. In addition, as they familiarize to the commercial
approach, they must echo the honesty of the business and its commitment to excellence.
Keywords: Standard Operating Procedure, Customer Research, Rural Entrepreneurship
1. Introduction
The incubator concept is significant in assisting the seeding of entrepreneurs. Sadly, over the years
about 85% of these entrepreneurs have been failing within the first three years of operating as
standalone entities [1]. Securing businesses also present challenges as target customers insist that
certain management systems must be in place. Having realized an opportunity for adopting various
simple technologies and employing these to create wealth through manufacturing, SA has been
establishing SME incubators since 2006. The research is based on the well-known need to improve
rural small towns in South Africa (SA) by empowering small enterprise incubators that will lead to
economic growth and sustainability in rural regions of country.
SA adopted this concept almost ten years ago with backing beginning at the Small Enterprise
Development Agency [5] [3]. The state has today recognized 40 incubators further nationwide. This
has shortened the failure frequency of small to medium enterprises (SMEs) in their initial two years
of existence after 90% towards nearby 70% [3]. The failure frequency of SMEs in their initial two
years remained above 60% in Africa and similar emerging nations. Nonetheless, these SMEs remain
very vulnerable to failure due to the absence and stagnation of their quality management systems
(QMS). Sustainable businesses are important to any society or community, as they stimulate other
related sectors of the economy [6] to be productive. More especially, in rural regions of the country
SME’s need to experience growth and be sustainable.
This study focuses on the development and implementation of Total Quality Management (TQM)
frameworks and their relationship to Standard Operating Procedure (SOPs). It highlights the
importance of TQM and SOP’s as well as their contributions to rural entrepreneurship, in the field of
TQM. The study illustrates how standard operating procedure, if understood by rural situated small
and medium sized enterprises can be utilized as a component of a well-organized administration
system, market penetrate tool towards sceptic and sensitive customers, and a competitive strategy
over market competitors. The general growth of any country is embodied by the main influence
in Internet connectivity. Notwithstanding the undefined setting in which SMEs work, internet
adoption in South Africa is mainly driven by the SMEs owner/manager [7], also counting the usage
of portable phones.
2. Research Background
In the mid-1990s, about 100 000 job openings were lost annually [9], consequently after majority
of start-ups in South Africa boarded on guidelines of cost-cutting and reshuffle to keep up with
global competition [8]. Additionally, shortly after South Africa grow into the world-wide economy
[10], numerous defensive commercial guidelines which were in support of South African businesses
were banished. The consequential outcome of the intense competitive world-wide commercial
condition, fired South Africa into sombre financial difficulties as the inhabitants of the republic
delays upsurging which results to more joblessness, projected in region of 30% and 41% beginning
in 2001 [11] [10] [12]. The undesirable financial movements amounted to millions of rands lost
as small industries in South Africa were not able to be sustainable and to create sustainable work
openings [14] [15]. Amidst the turmoil, people who completed school were projected in region
of 325 000 and 462 000 nation-wide that were incompetent to find jobs in the job market [13].
Regrettably, the current environment of free enterprise in South Africa is incapable to entice the
required probable job paths owing to the county’s climate influences. Supplementary aspects such
as absence of commercial revenue and problems in raising the required capital, justify for business
failure [16]. These influences are main related influences on start-up closings. Moreover, [17]
claims uphold that the influences of economic provision and absence of Government aid hinders
free enterprise in South Africa [17]. Yet again, the recent account by [18] stresses that management
measures influence depressingly on the commercial atmosphere - for example, it takes between 19
and 22 days to complete numerous procedures that lead to business formation in South Africa [17].
3. Research Problem
The government of SA has embarked on a drive to promote employment through various infrastructure
development initiatives. These projects need small and upcoming enterprises to offer competitive
contributions and grow through their participation. There is, however, no model available which
SMEs can adopt to ensure successful participation. Many attempts and interventions have been
made to enable SMEs to survive. Despite this, most SMEs fail within the first few years of being
established. The SA government has also worked with the Department of Trade and Industry (DTI)
financed a number of incubator support programmes as a way of ensuring that these incubators
are a success, [2]. The research problem seeks to discover the trials of rural free enterprise in the
designated parts. Importantly, to regulate and assess the serious trials that hinder the ability of
rural free enterprise and small businesses to grow fruitful and supportable. Thus, extracting from
the several Comprehensive Free Enterprise Monitor reports and research literature work will be
important.
Figure 1.1 beneath demonstrates the chart of South Africa viewing the Free State Province of South
Africa. The study will be conducted at two district municipalities in the province, the Fezile Dabi
and Lejweleputswa District Municipalities respectively.
Figure 1.1: The Chart of South Africa Viewing the Free State Province
Source: http://southafricanresearcher.blogspot.com/2010/04/maps-of-south-africa-1.html
This includes the strategies are deployed in South Africa, in particular the Free State province in
countering the challenges facing by small and medium sized companies. This situation brings forth
the research question for this study.
4. Literature Review
A literature review is significant because the researcher needs to reveal what is by now acknowledged
in the frame of knowledge preceding to beginning any investigation. Considering these deliberations,
the fundamental purpose of the research is to discuss the subject an effective literature study. This is
done by suggesting a methodical ploy which guides the researcher, as the task can become daunting.
In this literature review, the chapter starts by defining the setting where the research problem arises.
The study focuses on supporting literature which relates to the research objectives. This will assist in
guiding the study closely to the main topic and only bring attention to relevant evidence.
The literature review will assist to develop a TQM SOP framework for rural entrepreneurs and small
businesses. The literature that will be reviewed in this research will be on and rural situated small
businesses TQM, SOPs, customer research, and the adoption of mobile internet by rural situated
small businesses. The literature review will categorize the major themes of the subject and highlight
the state of knowledge and gaps in the existing body of knowledge.
very important for the economic growth of a country. The procedures in place are common way
to keep administration up to date in most small businesses. In addition, businesses competing in
an increasingly global market, independent of size and sector, rely heavily on SMEs to provide
sub-contracting facilities. To improve service and product quality, organizations must be assured
of obtaining high quality goods and services from small and medium sized suppliers [22]. Hence
there is a need for SMEs to meet the required quality standards. There is also severe competition
among SME suppliers that exert strong pressure to reflect the use of quality management system,
specifically standard operating procedures.
communities in rural SA are still living in poor conditions [35], through SMEs working in many
rural and slow zones, establishing an essential portion of the home-grown economy and a main basis
of job creation as reasoned [36].
This tactical bearing includes a SME’s opportunity-taking tendency, its aptitude to stand competitively
firm, energetic conduct, and merchandise invention [37]. Rural free enterprise nowadays is a main
prospect for SMEs who drift from rural zones or semi-urban zones to urban zones. Rural free
enterprise signifies the casual subdivision of the economy, categorized by small-scale industries,
connecting trivial buyers and craftsperson’s [38]. Further notably, Rural free enterprise can be well-
thought-out as the single answer to decrease scarcity, relocation, financial inequality, and joblessness
and to grow rural zones and recessive areas [39].
several constructive influences of the usage of portable devices for start-ups. Transacting usually
turn out to be faster, low-priced and less dangerous. [56] advises, that in place of growing the
effectiveness of commercial processes, dropping buying charges, refining communication in
cooperation providers and clients, and attaining available commercial prospects, industries with
restricted usage of ICT might miss out on commercial prospects. These advantages are particularly
expressive for the financial growth of SMEs [57].
3. Research Gap
Conducted research studies on TQM and organisational performance, in developing countries
around the world, as well as South African manufacturing and service industries, [58]. This view
is supported by an advanced search of published articles over the last 5 years in South Africa.
Therefore, this study will endeavour to demonstrate that, small businesses, within the Free State
Province, should employ the key practices of TQM with a view to improving quality of products,
processes and services which in turn will enhance organisational performance, [59]. Thus, employing
TQM elements in achieving organisational performance becomes fundamentally important for small
businesses in order to gain a competitive advantage. Furthermore, it is projected that the findings of
this study will encourage research in other small business sectors throughout South Africa. There
was no indication of any published research using the framework developed in this study.
4. Proposed Research Framework
In this section, a proposed framework to address the problem statement and underlying influences
presented. The proposed framework illustrates the interrelationships between TQM and SOPs towards
customer research and customer research in obtaining new customer acquisition. Furthermore, it
illustrates the input parameters, the supporting conditions that needs to be in place while developing
a TQM SOP Customer acquisition framework. Figure 4 shows that there are three input blocks to
new customer acquisition.
First, the Total Quality Management block shows the basis input parameters, which serve as the
starting point. It is also on this foundation, the ability to influence new customer acquisition with
TQM performance attribute, will be possible. Second, the Standard Operating Procedure block
which ensures the SOP document is in place and the sequence of the necessary steps are followed
in customer research and engagement customer. It is also on this step, the ability to influence new
customer acquisition with SOP performance attribute, will be possible. Third, Customer Research
and Customer Engagement block considers the due-diligence and preparation done beforehand in
customer research and customer engagement. It is also on this foundation, the ability to influence
new customer acquisition with customer research and customer engagement performance attribute,
will be possible. Fourth, the Supporting Conditions upright adjacent block shares enabling elements
to the three blocks (TQM, SOPs and Customer Research & Customer Engagement) to yield new
customer acquisition. The end process of new customer acquisition will result is profitability and
customer increase.
5. Conclusion
There is much to be explored and studied concerning the implementation of TQM and SOPs focusing
on customer research and engagement in SMEs that are situated rural areas. The implementation of
TQM and SOPs focusing on customer research and engagement, depends on various factors that need
to be analysed. This research will provide a thorough aspect on the implementations of TQM and
SOPs, in both small-and-medium sized enterprises and larger enterprises studied and experienced by
research academics and practitioners. The implementation of TQM constructs will be the stepping-
stone towards the later findings. The development of the SOP instrument for administration of the two
customer acquisition factors. First customer research, second customer engagement, respectively,
will construct the empirical validating the instrument for assisting SMEs in rural situated areas. The
TQM and SOPs constructs, focusing on customer research and engagement, will link to the critical
supporting conditions factors, which include the adoption and use of mobile internet by SMEs and
will be used in the proposed framework for rural situated areas SMEs. The proposed framework will
be presented to the responsible government bodies and research recommendations will come from
the findings. The data collection is still in progress.
References
Cader, H. L. J. 2011. Small business survival and sample selection bias, Small Bus. Econ., Vol. 37, pp. 155-165.
Jura, D (2016). Quality management framework for incubation clusters. PhD
Department of Trade and Industry,.2013. Industrial Policy Action Plan (IPAP), Pretoria, South Africa: the dti.
DTI, 2007. Survival rates of VAT-registered enterprises, 1995-2004 on: DTI Small Business Service. [Online] http://
stats.berr.gov.uk/ed/survival [Accessed 13 August 2012].
SEDA, 2006-2014. Annual Reports, Pretoria, South Africa: Small Enterprise Development Agency.
Koren, Y., Hu, S., Gu, P. & Shpitalni, M. 2013. Open-architecture products, CIRP Annals- Manufacturing Technology,
62(2).
Sundstrom, J. (2006). Adoption of Electronic Invoicing in SMEs. Master’s thesis, Lulea University of Technology,
Sweden.
Agbenyegah, A (2013), Challenges facing rural entrepreneurship in selected areas in South Africa. PhD
NASSER, M. E., DU PREEZ, J. & HERRMANN, K. 2003. Flight of the young flamingos: alternative futures for young
entrepreneurs in South Africa. Futures, 35(4):393-401.
NASSER, M. E., DU PREEZ, J. & HERRMANN, K. 2003. Flight of the young flamingos: alternative futures for young
entrepreneurs in South Africa. Futures, 35(4):393-401.
RWIGEMA, H. & VENTER, R. 2008. Advanced entrepreneurship, 2nd ed. Cape Town: Oxford University.
VAN EEDEN, S., VIVIERS, S. & VENTER, D. 2003. A comparative study of selected problems encountered by small
businesses in the Nelson Mandela Cape Town and Egoli Metropoles. Management Dynamics, 12(3):13-23.
PRETORIUS, M. & SHAW, G. 2004. Business plans in bank decision making when financing new ventures in South
Africa. South African Journal of Economic and Management Sciences, 7(2):221-242.
VAN EEDEN, S., VIVIERS, S. & VENTER, D. 2003. A comparative study of selected problems encountered by small
businesses in the Nelson Mandela Cape Town and Egoli Metropoles. Management Dynamics, 12(3):13-23.
BAARD, V.C. & VAN DEN BERG, A. 2004. Interactive information consulting system of South African small
business. South African Journal of Information Management, 6(2):1-19.
KELLY, D.J., SINGER, S. & HERRINGTON, M.D. 2012. Global Entrepreneurship Monitor 2011. Global Report,
London: Global Entrepreneurship Research Association.
KELLY, J., BOSMA, N. & AMOROS, J. E. 2011. Global Entrepreneurship Monitor (GEM). Global Report 2010.
Boston, MA: Babson College.
WORLD BANK. 2008. Doing Business. Women in Africa: Case studies of women entrepreneurs across Africa who has
overcome legal and regulatory obstacles to create new business opportunities. Washington, DC: World Bank.
2. 21 CFR 9211.100. Written procedures; deviations (a)(b).
Cardiff University (2009). Standard operating procedure for the use or storage of human tissue for the purposes of
research or education. Available at: http://www.cf.ac.uk/govrn/cocom/resources/standard%20Operating%20
procedures.pdf.
Frank, Dave. (2010). How to write SOPs that help increase consistency and improve performance quality in Standard
Operating Procedures: A Writing Guide. Available at: http://www.cmmonline.com/management-training/
article/standard-operatingprocedures-a-writing-guide.
Hamrell MR, Wagman BR. Standard operating procedures in clinical research: a beginner’s guide. Qua/ Assur).
2001:5:93-97.
Stephen L. Vargo a , Paul P. Maglio b,*, Melissa Archpru Akaka a, On value and value co-creation: A service systems
and service logic perspective, European Management Journal (2008) 26, 145– 152
Tseng, M.M. and Piller, F.T. (2003). The Customer Centric Enterprise: Advances in Mass Customization and
Personalization, Springer Verlag, Berlin, New York.
McKay, A., de Pennington, A. and Baxter, J. (2001). Requirements Management: A Representation Scheme for Product,
Computer-Aided Design, 33(7): 511–520.
Jia,j and Chen,C (2006), Customer Requirement Management in Product Development: A Review of Research Issues,
School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore
Grönroos, C. (1990), Service Management and Marketing, Lexington Books, Toronto, ONT.
Saxena, S. 2012. Problems Faced By Rural Entrepreneurs and Remedies to Solve It. IOSR Journal of Business and
Management (IOSRJBM), 3 (1): 23-29.
Patel, B. and Chavda, K. 2013. Rural Entrepreneurship in India: Challenge and Problems.International Journal of
Advance Research in Computer Science and Management Studies, 1 (2):28-36.
Gedeon, S. 2010. What is Entrepreneurship? [Online]. Available at: http://www.entryerson.com/epr/index.php/jep/
article/viewFile/60/43 (Accessed 27/25/2014).
Gowrishankar, M., Raja, C.M. and Prasad, D.N. 2014. Promoting rural entrepreneurship throught rural cluster
development and hand holding services on the facilitation institute. Special April Issue, 3 (4):1-3.
Bad, P., Patel, C, Patel, V. and Tare, D. 2013. Rural Entrepreneurship. [Online]. Available at: http://www.scribd.com/
doc/27594118/Rural-Entrepreneurship (Accessed 06/08/2014).
Willebois, I. 2011. Promoting rural enterprise growth and development: Lessons from four projects in sub-Saharan
Africa [Online]. Availabel at: http://www.ifad.org/pub/pa/field/2.pdf (Accessed 22/09/2015).
Wright, M. and Stigliani, I. 2013. Entrepreneurship and growth. International Small Business Journal, 33:231-253.
Van der Walt, L. 2006. Collective entrepreneurship as a means for sustainable community development: a cooperative
case study in South Africa. [Online]. Available at: http://led.co.za/sites/default/files/cabinet/orgname-raw/
document/2011/cooperative_case_study_sa_-_2006.pdf (Accessed 22/09/2015)
Meccheri, N. and Pelloni, G. 2006. Rural entrepreneurs and institutional assistance: an empirical study from mountainous
Italy. Entrepreneurship & Regional Development: An International Journal, 18 (5):371-392.
Covin, J.G. and Slevin, D.P. 1991. A Conceptual Model of Entrepreneurship as Firm Behavior. Entrepreneurship Theory
and Practice, 16 (1):7-25.
Ibukunoluwa, O.E.and Oluwadamilola, E.A. 2014. Relevance of prosocial behaviours to rural entrepreneurship
development in Nigeria, Case Studies Journal, 3 (4):8-15.
Raghurama, A. 2012. Rural Entrepreneurship: A Catalyst for Rural Development, International Journal of Science and
Research (IJSR). [Online]. Available at:http://www.ijsr.net/archive/v3i8/MDIwMTUxNjQ=.pdf (Accessed
13/09/2014).
Lawson, R., Alcock, C., Cooper, J. and Burgess, L. (2003), “Factors affecting adoption of electronic commerce
technologies by SMEs: an Australian study”, Journal of Small Business and Enterprise Development, Vol.
10 No. 3, pp. 265-76.
Kakihara, M. & Sørensen, C. (2002). Mobility: An Extended Perspective. 35th Hawaii International Conference on
System Sciences, Maui, Hawaii.
Jarvenpaa, S. L., Lang, K. R. et al. (2004). Manifestations of Technology Paradoxes and Implications on the Experience
of Mobile Technology Users. Austin Mobility Roundtable, Austin, Texas.
Barnes, S. J. (2002). Unwired Business: Wireless Applications in the Firm’s Value Chain. Sixth Pacific Asia Conference
on Information Systems, Tokyo, Japan
Roycroft, T., Anantho, S. (2003), “Internet Subscription in Africa: Policy for Dual Digital Divide”, Telecommunications
Policy, Vol. 27, pp.61-74.
Henfridsson, O. & Lindgren, R. (2003). Facilitating in-car use of multi-context mobile services: the case of mobile
telephone conversations. Americas Conference on Information Systems, Tampa, Florida.
Katz, J. E., and M. Aakhus, eds. (2002). Perpetual Contact: Mobile Communication, Private Talk, Public Performance.
Cambridge: Cambridge University Press.
Bertolini, R. (2001). Telecommunication services in Sub-Saharan Africa (Vol. 26). Frankfurt: Peter Lang.
Galloway, L., Sanders, J. and Deakins, D. (2011), “The role of internet portals for rural small firms: evidence from
Scotland”, Journal of Rural Studies, Vol. 27 No. 2, pp. 254-262.
S. Guo, M. H. Falaki, E. A. Oliver, S. U. Rahman, A. Seth, M. A. Zaharia, U. Ismail, and S. Keshav. Design and
Implementation of the KioskNet System. In ICTD’07, Bangalore, India, December 2007.
L. Waverman, M. Meschi, and M. Fuss. The Impact ofTelecoms on Economic Growth in Developing Countries. The
Vodafone Policy Paper Series, 2:10–23, 2005.
H. V. Milner. The Digital Divide: The Role of Political Institutions in Technology Diffusion. Comparative Political
Studies, 39:176 – 199, March 2006.
K. W. Matthee, G. Mweemba, A. V. Pais, G. van Stam, and M. Rijken. Bringing Internet Connectivity to Rural Zambia
using a Collaborative Approach. In ICTD’07, Bangalore, India, December 2007.
S. Surana, R. Patra, S. Nedevschi, M. Ramos, L. Subramanian, Y. Ben-David, and E. Brewer. Beyond Pilots: Keeping
Rural Wireless Networks Alive. In NSDI’08, San Francisco, CA, April 2008.
Joubert, R. (2008, November 19). The mobile web: An untapped opportunity for publishers. Retrieved March 23, 2009,
from http://www.rickjoubert.com/?p=19
Jagan, A., Heeks, R. & Whalley, J. (2007). Mobile Telephony and Developing Country Micro-Enterprise: A Nigerian
Case Study. Development Informatics, Working Paper Series, Paper No 29,
Kotelnikov, V. (2007). Small and Medium Enterprises and ICT. Asia-Pacific Development Information Programme.
Available at http://www.unapcict.org
Konde, V (2007). What Type of National ICT Policies Maximise ICT Benefits. ATDF Journal 4(1),37–48.
Baloyi. T.A (2013), The application, utilisation and implementation of total quality management in the South African
manufacturing industry: a case study.
Sukdeo, N (2016), The role of Total Quality Management (TQM) practices on improving Organisational Performance
in manufacturing and service organisations. PhD.
Joseph Ndikumana
University of Johannesburg, Faculty of Engineering
and the Built Environment, South Africa
E-mail: ndikujoseph2006@yahoo.fr
Arnesh Telukdarie
University of Johannesburg, Faculty of Engineering
and the Built Environment, South Africa
E-mail: arnesht@uj.ac.za
Hannelie Nel
University of Johannesburg, Faculty of Engineering
and the Built Environment, South Africa
E-mail: hannelien@uj.ac.za
Abstract
Businesses in the manufacturing sector are faced with sustainability challenges. This is mainly due to changes in
resource availability, changes in environmental regulations and increase in social demands. As new methods
of production are introduced by changes in technology or changes in resource availability, businesses in the
manufacturing sector are affected and have to review operational strategies in order to stay in business. This does
not only require financial fitness but meeting environmental and social requirements as well. There is no single,
internationally recognized tool that organizations in the manufacturing sector can use to achieve sustainability.
This paper explores the results from the implementation of Lean Manufacturing in a South African Clamps and
Worm Drives manufacturing company and proposes the use of Lean Manufacturing as a tool for achieving business
sustainability in the manufacturing sector. The authors employ the Company records to evaluate the impact of Lean
Manufacturing on the organization’s financial, environmental and social status. The results show an improvement
on the company turnover by 15.62% year on year from when a reduction in carbon emission by 74.14 tonnes of
CO2 emission per year and job security for all employees.
Keywords: Business Sustainability, Lean Manufacturing, Financial Fitness, Environmental Responsibility, Social
Responsibility
1. Introduction
Businesses in the manufacturing sector face the challenge of meeting the three pillars of sustainability
(Souza and Alves, 2018). This is mainly due to changes in resources availability, changes in
environmental regulations and increase in social demands (Kandachar and Halme, 2017). As new
methods of production are introduced by changes in technology or changes in resources availability,
businesses in the manufacturing sector are affected and have to review their operational strategies
in order to stay in the business (Kandachar and Halme, 2017). The concept of sustainability was
adopted by the World Commission on Environment and Development (WCED) in 1987. Sustainable
development is defined in the Brundtland Report as “A development that meets the needs of the
present without compromising the ability of future generations to meet their own needs” (Lots and
Brent, 2017). Viederman (1994) defined sustainability as “a community’s control and prudent use
of capital—All form of capitals: Nature’s capital, human capital, human created capital, social
capital and cultural capital-- to ensure, to the degree possible, that present and future generations can
attain a high degree of economic security and achieve democracy while maintaining the integrity
of the ecological systems upon which all life and all production depends”. Svensson and Wagner
(2015) defined business sustainability as “a company’s economic, social and environmental efforts
to implement and manage its own and its business network’s impact on Earth’s life and ecosystem”.
It is clear that, from all the definitions above, the emphasis is on the economy, the environment and
the society. Manufacturing organizations have to be profitable, fulfil environmental responsibilities
and bring positive impacts to the society, starting with company stakeholders. The sustainability of
a business, therefore, depends on how well an organization tackles financial challenges, fulfils the
environmental requirements and meets the society needs (Svensson et al., 2016).
Figure 1: Interaction of the three Pillars of Business Sustainability: Adapted to (Svensson et al., 2016)
The task of meeting these requirements at the same time can be challenging. This is because most
of the problems to be solved are not of a singular nature. The three pillars of business sustainability
interact with one another, creating new aspects of challenges: socio-environmental aspects, socio-
economic aspects and environmental- economy aspects (Svensson et al., 2016). It is therefore
important that organizations in the manufacturing sector develop strategies and tools that can be
utilised to simultaneously cater for its financial, environmental and social needs. Researchers
highlight the challenges of meeting business sustainability, but they do not recommend any specific
tool that can be used to attain sustainability in the manufacturing sector (Souza, J.P.E. and Alves,
2018). Lean manufacturing is acclaimed to be a powerful tool that reduces wastes and improves
efficiency in manufacturing environment (Yang et al., 2011). But, can lean manufacturing be used
as a tool for attaining business sustainability in the manufacturing sector? In this paper, the authors
test the implementation of Lean Manufacturing in a South African Manufacturing Company and
examine the role it plays in meeting financial, environmental and social needs. Figure 1 presents the
interaction between the three pillars of sustainability.
2. Review of Literature
Organizations in the manufacturing sector are becoming more aware of sustainability and the impact
it has on the economy, society and environment (Epstein and Rejc, 2014). Morioka et al. (2016)
highlight that the incorporation of sustainability into businesses requires improving organisations’
Social, Environmental and Economic status. It is in this regard that Roca and Searcy (2012) and
Helleno et al. (2016) classify the indicators of business sustainability in three categories: economic
indicators (cost reduction and growth), environmental indicators (management of pollution) and
Social indicators (training and development). While business executives understand the benefits
of business sustainability as related to fulfilling company financial, environmental and social
responsibilities, not all have managed to implement sustainability in their businesses (Vinodh et al.,
3. Research Methodology
The purpose of this research is to determine if the implementation of Lean Manufacturing can help
to achieve Business Sustainability in the manufacturing sector. For this purpose, a literature review
is conducted to discover the internationally recognized indicators of business sustainability and the
role that lean manufacturing can play to achieve them. Subsequently a case study is conducted to
validate the impact of Lean Manufacturing on Business Sustainability in the manufacturing sector.
Based on guidelines by Saunders et al. (2009), the researchers selected the organization for the case
study on the basis on the following criteria:
●● A private manufacturing company with existence of more than 15 years to ensure that
only data from a stable company is used.
●● A private company that is certified to ISO standards (ISO 9001:2015) to ensure that the
company has at least a globally referenced best practice.
●● A manufacturing company that ran the implementation of lean manufacturing for at least
3 years to ensure sufficient data.
●● Access to the company’s data/ records to ensure that the research is not abandoned due
to lack of desired type of data.
The researchers selected a manufacturing company based in Industrial North, Roodepoort (South
Africa) that manufactures various metal horse clamps and clips. The organization is privately owned
and has 66 permanent and 6 seasonal employees. The company is in existence for more than 50
years. It is certified to ISO 9001 and ISO/TS 16949 (Specific to automotive industry). It officially
started the implementation of Lean Manufacturing in January 2015. The implementation of the lean
manufacturing philosophy is currently still running.
In order to understand the impact that the implementation of Lean manufacturing has on the
organization’s indicators of sustainability, the researchers gather records of data for 6 years: From
January 2012 to December 2017. These records are divided in two sets: Records from January
2012 to December 2014 and records from January 2015- to December 2017. The first set of data
is for three years prior and the second set of data is for three years post the implementation of
Lean Manufacturing. Based on various tools and techniques for enabling sustainability using lean as
presented by Vinodh et al. (2011), the following records are used:
●● Electricity bills: These records are for checking if changes in the usage of electricity
between the two periods exist. A reduction in power consumption has two benefits:
reduction of operational cost and reduction of air pollution
●● Records of monthly sales against targets: These records are for checking if the sales
levels against targets improved since the implementation of lean manufacturing. Note
that, the company has a policy: Whenever a monthly sales target is met, the workforce
gets a profit share in the forms of bonuses.
●● Records of training: These records are for checking if the workforce gained skills from
the implementation of Lean Manufacturing
●● Records of the company turnover for 6 years (2012-2017): These records are for checking
if the implementation of lean manufacturing improved the organization turnover
●● Records of completed improvement projects
Economic indicators: Consistent growth, Risk Reduces operational costs, increases market share, improves
Management, Maximum return, Cost reduction, resources revenue, reduces all types wastes and improves efficiency
efficiency (Martínez León and Calvo-Amodio, 2017) (Yang et al., 2011)
Social indicators: Sponsorship, Employment, training, Reduces safety hazards, reduces workers’ fatigue, improves
development and empowerment, Health and safety, workers’ skills, and improves jobs’ satisfaction (Santo et al.,
financial compensation (Helleno et al., 2016) 2015).
KWhs
115000
Monthly Power Usage For 2012-2014 and 2015-2017
105000
95000
85000
75000
65000
55000
45000
35000
Figure 2: Comparison of Monthly Power Usage for 2012 to 2014 and 2015 to 2017
Figure 3 compares the monthly power maximum demand for the period of 2012 to 2014 and 2015
to 2017. It can be seen that, the monthly maximum demand has an upwards trend. It means that the
power maximum demand for the 2012 to 2014 increased month after month. The monthly maximum
power demand for 2015 to 2017 has a downwards trend. It means that, the monthly maximum
demand for 2015 to 2017 decreased month after month.
290
Monthly Maximum Power Demand for 2012-2014 and 2015-2017
270
250
230
210
190
Demand 2012-2014 (KVA) Demand 2015-2017( KVA)
KVAs Linear (Demand 2012-2014 (KVA)) Linear (Demand 2015-2017( KVA))
170
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Months
Figure 3: Comparison of Monthly Maximum Power Demand for 2012 to 2014 and 2015 to 2017
Figure 4 presents the organization turnover amounts for the period of 2012 to 2017. It can be realized
that, the turnover was not improving for the period of 2012 to 2014. It was before the implementation
of Lean Manufacturing. For the period of 2015 to 2017, the period when the implementation of Lean
Manufacturing started, the turnover improved year after year.
Turnover
50 000 000
45 000 000
Amount in RANDs
40 000 000
35 000 000
30 000 000
25 000 000
20 000 000
15 000 000 Turnover
10 000 000 Poly. (Turnover)
5 000 000
0
Year Year Year Year Year Year
2012 2013 2014 2015 2016 2017
Figure 4: Organization’s Turnover for the Period of 2012 to 2017 (in RAND)
40,00
30,00
20,00
10,00
0,00
Jul-15
Aug-15
Sep-15
Nov-15
Dec-15
Jul-16
Aug-16
Sep-16
Nov-16
Dec-16
Jul-17
Aug-17
Sep-17
Nov-17
Dec-17
Mar-15
Mar-16
Mar-17
Feb-15
Feb-16
Feb-17
Jan-15
Jun-15
Jan-16
Jun-16
Jan-17
Jun-17
Apr-15
Oct-15
Apr-16
Oct-16
Apr-17
Oct-17
May-15
May-16
May-17
20
19
18
17
16
15
14
13
12
11
10
9
8
No of Times
7
6
5
4
3
2
1
2012-2014 2015-2017
Period
Figure 6: Number of Times Employees Received Bonuses Due to Meeting Monthly Sales Targets
In summary, Table 1 compares the results from the implementation of lean manufacturing from the
literature review and the case study’
Table 2: Summarized Results from the Implementation of Lean
5. Conclusion
In this paper the impact of Lean Manufacturing on business sustainability in the manufacturing
sector was explored. The literature review showed that the trio factors involved in business
sustainability are financial, environmental and social indicators. The case study provided evidence
that the implementation of lean manufacturing improved financial, environmental and social
indicators of business sustainability. The article therefore brings an understanding of the importance
of implementing lean manufacturing in the manufacturing sector businesses. It is recommended that
future studies focus on evaluating the impact of lean manufacturing on the indicators of business
sustainability in other sectors.
IAMOT 2019 | 951
Managing Technology for Inclusive and Sustainable Growth
References
Chiarini, A. (2014), “Sustainable manufacturing-greening processes using specific Lean Production tools: an empirical
observation from European motorcycle component manufacturers”, Journal of Cleaner Production, 85, 226-233.
Cudney, E.A., Dietrich, D. and Furterer, S. (2013), Lean Systems, CRC Press, Baton Rouge.
Epstein, M.J. and Rejc, A. (2014), Making sustainability work: best practices in managing and measuring corporate
social, environmental, and economic impacts, Second completely revised and updated edn, Greenleaf
Publishing/Berrett-Koehler Publishers, Inc., San Francisco.
Helleno, A.L., de Moraes, A.J.I. and Simon, A.T. (2017), Integrating sustainability indicators and Lean Manufacturing
to assess manufacturing processes: Application case studies in Brazilian industry. Journal of cleaner
production, 153, 405-416.
Jabbour, C.J.C., de Sousa Jabbour, A.B.L., Govindan, K., Teixeira, A.A. and de Souza Freitas, W.R. 2013, “Environmental
management and operational performance in automotive companies in Brazil: the role of human resource
management and lean manufacturing”. Journal of Cleaner Production, 47, 129-140.
Souza, J.P.E. and Alves, J.M., 2018, Lean-integrated management system: A model for sustainability improvement.
Journal of Cleaner Production, 172, 2667-2682.
Kandachar, P. and Halme, M. (2017), “Sustainability challenges and solutions at the base of the pyramid: Business,
technology and the poor”. Routledge
Lots, M. and Brent A. (2017), Carbon Footprinting Guide: A practical footprinting calculation guide focusing on
measuring, monitoring, reporting and verification, Sandton: Nedbank
Martínez León, H.C. and Calvo-Amodio, J. (2017), “Towards lean for sustainability: Understanding the interrelationships
between lean and sustainability from a systems thinking perspective”, Journal of Cleaner Production, 142,
4384-4402.
Morioka, S.N., Evans, S. and Carvalho, M.M.D. (2016), “Sustainable Business Model Innovation: Exploring Evidences
in Sustainability Reporting”, Procedia CIRP, 40, 659-667.
Roca, L.C. and Searcy, C. (2012), “An analysis of indicators disclosed in corporate sustainability reports”, Journal of
Cleaner Production, 20 (1), 103-118.
Santos, Z.G.d., Vieira, L. and Balbinotti, G. (2015), “Lean Manufacturing and Ergonomic Working Conditions in the
Automotive Industry”, Procedia Manufacturing, 3, 5947-5954.
Saunders, M., Lewis,P. and Thornhill, A. (2009). Research methods for business students. Pearson education
Svensson, G., Høgevold, N., Ferro, C., Varela, J.C.S., Padin, C. and Wagner, B. (2016), “A Triple Bottom Line
Dominant Logic for Business Sustainability: Framework and Empirical Findings”, Journal of Business-to-
Business Marketing, 23 (2),153-188.
Svensson, G. and Wagner, B. (2015), “Implementing and managing economic, social and environmental efforts of
business sustainability: Propositions for measurement and structural models”, Management of Environmental
Quality, 26 (2), 195-213.
Viederman, S. (1994), Five Capitals and Three Pillars of Sustainability, The Newsletter of PEGS, 4(1), 5-12
Vinodh, S., Arvind, K. & Somanaathan, M. (2011), “Tools and techniques for enabling sustainability through lean
initiatives”, Clean Technologies and Environmental Policy, 13 (3), 469-479.
Yang, M.G., Hong, P. and Modi, S.B. (2011), “Impact of lean manufacturing and environmental management on
business performance: An empirical study of manufacturing firms”, International Journal of Production
Economics, 129 (2), 251-26.
Nishita D. Parekh
MPSTME, NMIMS, Chemical Engineering Department, India
Email: nishita.parekh@nmims.edu
Jinu Kurian
MPSTME, NMIMS, Technology Management Department, India
Email: jinu.kurian@nmims.edu
Rajesh Patil
MPSTME, NMIMS, Mechanical Engineering Department, India
Email: rajesh.patil@nmims.edu
Richa Gautam
The TATA Power Co. Ltd., Corporate Sustainability Department, India
Email: richagautam07@gmail.com
Abstract
Energy Management influences energy demand, cost, environment and social impact that affect, a company’s
position in carbon market, customers’ willingness to pay and shareholders’ willingness to invest. To utilize
the available energy effectively and make the industrial systems sustainable, there is need for Industries to
work towards energy management and energy efficient solutions as they are the major consumers of energy
(oil, gas and coal) and emitters of greenhouse gases and carbon. Process industries are considered to be energy
intensive industries; many of these industries are heavily dependent on external supply of energy, whereas others are
less dependent as they are able to generate energy in-situ.
This paper explores the driving forces for incorporating energy management practices as continuous process, as well
as the obstacles for the same. This paper is based on a comprehensive literature review on recent studies on energy
management and energy efficiency from peer reviewed journal articles, conference proceedings, white papers, web
materials, reports and books.
The paper highlights the importance of treating energy management as strategic factor at par with production for
process industries to be effective and profitable. The importance of generating revenue by application of energy
management practices is the key take away from this paper. Also the findings relate to fact that both the driving
forces and the barriers coexists in society but the most optimal solution needs to be worked upon for betterment of
the environment, society and industry itself. The findings of the paper will be useful for future research on energy
management.
Keywords: Energy Management, Energy Efficiency, Process Industries, Drivers, Barriers
1. Introduction
We are moving towards an era of circular economy, the value and opportunity it provides is
being recognised and realised by Companies and their stakeholders. Geissdoerfer (2016) defines
circular economy as a regenerative system in which resource input and waste, emission and energy
leakage are minimised by slowing, closing and narrowing material and energy loops. Research also
identifies circular economy to be more sustainable compared to linear economy of use and dispose.
This concept is gaining momentum in the field of energy Management which is the important
contributor to mitigate climate change and saving environment by reducing carbon footprint
and reduction of greenhouse gases. United Nations development program (UNDP) has stressed
“affordable and Clean Energy” as one of their seventeen sustainable development goals, built on the
success of millennium development goals in January 2016, to protect the planet and ensure access
to affordable, reliable, sustainable and modern energy to all. Adding to it was the historic Paris
agreement held in 2015 in Paris, France, signed by 195 countries called as Conference of Parties
21 or COP 21, “to set goal of limiting global warming to “well below 2 degree Celsius” compared
to pre-industrial levels”. The stage is already set for concentrating on Energy management as key
factor.
burning fuel producing steam for heating or power generation, using electricity for operating cooling
tower used for producing cooling water as utility. The in-situ generation of energy is related to
utilising energy which is produced as by product of process or waste from process. This includes
utilising exothermic heat of reaction to generate power, extracting energy from flue gases to be
vented, cogeneration and integration using pinch technology.
Ammar et al. (2012) points that significant amount of energy fed is lost either in leakages from process
units or wasted, thermal energy loss is unavoidable for process industry known for number of process
units. Process Industry being more energy intensive, with the high energy cost and the increased
importance of rationalising energy, the gains from energy management would be significant.
As pointed by Cagno and Trianni (2012); Schulze et al. (2016) a large body of literature exists,
from 1970s, by researchers from several discipline like engineering, behavioural and organizational
studies, economics, finance and others has been involved in studying or identifying Drivers and
Barriers to energy management in general or energy efficiency. Brunke et al. (2014); Trianni
et al. (2016) have tabulated the barriers and driver to energy management in manufacturing industry,
as observed from previous studies and added contribution to those studies by building on them.
The recent activities on the global scale has encouraged the authors to critically and systematically
review the available literature in light of advances in technology, technology exchange between
countries, increasing awareness for sustainable businesses, intense competition and global business.
2. Analysis
The external factors were further categorised into Political, Economic, Social, Technological, Legal
and Environment related factors and their impact analysed using PESTLE analysis (Fig 2) and the
internal factors were analysed using SWOT (Strength, Weakness, Opportunities and Threats) analysis.
2.2.1. Political
The political will is very important to drive the energy management practices. The favourable
policies framed would help diffuse the energy management practices and energy efficient methods to
percolate well within process industry. As mentioned by Soni (2017); Mittal (2016), the provision of
uninterrupted supply of energy, incentives in terms of tax benefits, subsidies for energy audits, energy
efficiency programs and schemes, financial help or financial support platform would encourage
the companies to ensure energy management practices. The availability of information related to
energy audits, energy consultants/ experts, the success stories of energy management practices
in form of case studies on public domain would encourage even small and medium enterprises
to do their part. (Brunke et al., 2014); (Cagno and Trianni 2012); Bureau of Energy Efficiency
2008. In many developing countries the database related to energy consumption by companies,
best available technology and benchmarking techniques are not available or partially available,
this becomes challenge for policy makers to develop effective policy on energy conservation
(Banerjee et al., 2012) where as in developed countries the bench marking database help small and
medium companies to compare their energy performance and technology. (Ammar et al., 2012)
2.2.2. Economic
The price of energy varies from country to country; in some country availability of energy at low
cost does not provide incentive for companies to ensure energy management practices. At times the
annual package of Energy manager could be more than the savings obtained from energy conservation
(Alcorta et al., 2014). On contrary the increase price of energy would force the companies to conserve
energy or reduce the usage of energy as in case of developed countries. The willingness and awareness of
financial institutions and banks are important to sanction the loan or financially help the companies for
reducing energy usage. (Cagno and Trianni 2012; Minciuc et al., 2017) The outsourcing compensation
to energy consultants and experts may be the deterring factor for the companies willing to optimise
energy use. The size of industry also matters as large companies gain due to economies of scale but for
Small and medium enterprises payback period or return on Investment is major concern. As observed
by Worrell et al. (2009) finance institutions play a critical role in implementing energy-efficiency
policies and their role extends beyond the provision of project finance, influencing technology choice.
2.2.3. Social
In the run to face the increasing global competition, energy management often is given low priority,
by companies as they focus more on production and balancing the forces of production. Applying
energy management practices is perceived as reduction in productivity. This barrier can be tackled
by driving the competition with energy management practices in place, thereby reducing the cost of
production, image makeover as green company, reaping benefits of low energy consumption, trading
carbon credits. Energy conscious consumer’s demand is key driver for the energy management
practices in company; the consumer is willing to pay extra for product of low carbon emission.
The concept of green supply chain also ensures that the suppliers, vendors and clients follow energy
management practices.
2.2.4. Technological
Energy efficient technology or methods can become barrier if not available for use
(patented/ trademarked) or is available at high price. Price is the bargaining factor when choosing
the technology for the industry and process industry is considered as capital intensive industry along
with energy intensive industry. The energy efficient technologies are perceived to be high on capital
investment requiring sufficient research and planning. (Mulder and Hagens 2008)
The incremental approach can be used in adopting to energy efficient technology/ methods like
extracting low grade thermal energy, integrating process using pinch technology, investing in
clean energy or renewable energy, investing in variable drive pumps and others. The saving from
energy could be between 5–40 % for process industries, if they use proper process integration
(Worrell et al., 2009). Energy supplies companies (ESCOs) if properly planned can effectively drive
the industry towards energy management practices.
2.2.5. Legal
The regulations made by government and Statutory bodies’ helps companies to focus on their energy
management goals, the companies competing globally would be required to adhere to the norms of
countries they are doing business into. The energy conservation regulations would help in ease of
doing business with an edge over competition.
2.2.6. Environmental
The concern for environment is increasing amongst the companies and environment protection
by reducing energy consumption or using clean renewable energy or optimizing the energy usage
is gaining momentum. The regulations framed to protect environment, is adding to drive energy
conservation and low carbon emission. The external pressure in terms of NGos, environmentally
conscious consumer drives the process industry to consider energy conservation as part of their
strategy. (Ammar et al., 2010)
lack of recovery from low thermal streams. This weakness can be tackled by continuous monitoring
of energy consumption, energy losses and maintaining database. This analysis is in concurrence
with Ammar et al. (2013) in his study indicating that energy efficiency comes with cost attached but
the return on investment needs to be studied and planned on case to case basis. The perception or
apprehension about potential negative effects on production performance weakens the company’s
resolve to be energy efficient and gain competitive advantage with it.
The analysis further points to the fact that the lack of knowledge of energy efficient measures or
awareness amongst staff is dependent on the information available over the public domain and the
drive within the employees to gather the information related to energy efficient methods and energy
management practices. This is supported in the study by Worrell et al. (2009) which observes that
with training and incentive systems in place this weakness could be partly catered.
The analysis also reveals that the lack of resources and skills needs to be addressed by the company
to reap benefits of energy management practices. This is in accordance with the study by Benedetti
et al. (2015) and Rudberg et al. (2013) which states that benefits can be accrued by putting energy
management as strategic agenda and core to business. With energy management as strategic function
proper planning and resource allocation is possible.
Failure to realise non energy benefits of energy management practices can lead to threat of
opportunity loss in terms of generating alternate revenue. With energy audit and energy manager in
place, various alternative revenue generation options can be worked upon like electricity generation
from surplus energy available in process industry, generating steam from waste heat and selling it
as product to nearby companies. The non-energy benefits also includes shareholders willingness
to invest, getting carbon credits and trading them, green behaviour of company. All these could be
opportunity loss if not encashed. (Minciuc et al. 2017)
Lack of trust on ESCO and consultants is dependent on how the energy experts/ consultants and
ESCO handles and understands the problems of the company and how well trained and experienced
they are. It is a mutual relationship to be managed to lower the energy bills of the company.
Alcorta et al. (2014) observes that the some companies perceive the consultants or experts as agents
of certain process provider or equipment providers, this lack of trust cannot get definite results.
3. Conclusion
Energy Management will gain more push in near future with Government and Industry working
together to fulfil the ambitious goal of Paris agreement on climate change. The path of energy
management is filled with barriers and there is no single policy that can help overcome them
together. The barriers can be systematically tackled by utilizing drivers for energy management.
The findings of this paper relate to fact that both the driving forces and the barriers coexists in
society but the most optimal solution needs to be worked upon for betterment of the environment,
society and industry itself. It becomes imperative to evaluate the external factors and internal factors
to enable decision making process pertaining to energy management and efficiency.
Based on the literature review, it is observed that government push or mediation are required for
Energy management to be treated as Strategic factor at par with production for process industries to
harvest its full benefits of being effective and profitable. The analysis also shows that the realization
of non–energy benefits will aid in generating additional revenue generation for the company.
As evident by the recent researches this would be the step towards circular economy, a regenerative
system which will add value to entire lifecycle of energy management.
This paper would help future research on energy management practices and importance of applying
energy management as strategic factor on company’s agenda.
References
Abdelaziz, E.A., Saidur, R. & Mekhilef, S. (2011). A review on energy saving strategies in industrial sector. Renewable
and sustainable energy reviews, 15(1), 150-168.
Alcorta, L., Bazilian, M., De Simone, G. & Pedersen, A. (2014). Return on investment from industrial energy efficiency:
evidence from developing countries. Energy Efficiency, 7(1), 43-53.
Alok Kumar Mittal, K.M. (2016, July-Sept.) Barriers and Drivers in Energy Efficiency in India: A SAP-LAP Analysis.
Productivity, 57, pp. 210-223
Ammar, Y., Joyce, S., Norman, R., Wang, Y. & Roskilly, A.P. (2012). Low grade thermal energy sources and uses from
the process industry in the UK. Applied Energy, 89(1), 3-20.
Archana Soni, A.M. (2017). Energy Intensity analysis of Indian manufacturing industries. Resource-Efficient
Technologies, 353-357
Arora, H. & LeChevallier, M.W. (1998). Energy management opportunities. Journal‐American Water Works
Association, 90(2), 40-51.
Backlund, S. & Thollander, P. (2011). The energy service gap: What does it mean? In ECEEE 2011 Summer Study
Energy efficiency first: The foundation of a low-carbon society, Belambra Presqu’île de Giens, France, 6–11
June 2011 (pp. 649-656). European Council for an Energy Efficient Economy (ECEEE).
Ball, P., Roberts, S., Davé, A. & Pimenta, H. (2013). 16.1 Towards a factory eco-efficiency improvement methodology.
In 11th Global Conference on Sustainable Manufacturing, Berlin (pp. 542-547).
Benedetti, M., Cesarotti, V. & Introna, V. (2015). Improving energy efficiency in manufacturing systems—literature
review and analysis of the impact on the energy network of consolidated practices and upcoming
opportunities.
Brunke, J.C., Johansson, M. & Thollander, P. (2014). Empirical investigation of barriers and drivers to the adoption of
energy conservation measures, energy management practices and energy services in the Swedish iron and
steel industry. Journal of Cleaner Production, 84, 509-525.
Brunke, J.C., Johansson, M. & Thollander, P. (2014). Empirical investigation of barriers and drivers to the adoption of
energy conservation measures, energy management practices and energy services in the Swedish iron and
steel industry. Journal of Cleaner Production, 84, 509-525.
Brunke, J.C., Johansson, M. & Thollander, P. (2014). Empirical investigation of barriers and drivers to the adoption of
energy conservation measures, energy management practices and energy services in the Swedish iron and
steel industry. Journal of Cleaner Production, 84, 509-525.
Cagno, E. & Trianni, A. (2013). Exploring drivers for energy efficiency within small-and medium-sized enterprises: first
evidences from Italian manufacturing enterprises. Applied Energy, 104, 276-285.
Cagno, E., Trucco, P., Trianni, A. & Sala, G. (2010). Quick-E-scan: A methodology for the energy scan of
SMEs. Energy, 35(5), 1916-1926.
Chan, C.W., Ling-Chin, J. & Roskilly, A.P. (2013). A review of chemical heat pumps, thermodynamic cycles and
thermal energy storage technologies for low grade heat utilisation. Applied thermal engineering, 50(1),
1257-1273.
Dolf Gielen, P.T. (2009). Indicators for industrial energy efficiency in India. Energy, 962-969
Duflou, J.R., Sutherland, J.W., Dornfeld, D., Herrmann, C., Jeswiet, J., Kara, S. & Kellens, K. (2012). Towards energy
and resource efficient manufacturing: A processes and systems approach. CIRP Annals-Manufacturing
Technology, 61(2), 587-609.
Eduard Minciuc, Ioana Diaconescu, Roxana Patrascu (2017). Energy Management for Energy Efficiency. FIAMA
Business and Management Journal, 5 (2), 63 - 72
Geldermann, Jutta, Martin Treitz and Otto Rentz. “Integrated technique assessment based on the pinch analysis
approach for the design of production networks.” European Journal of Operational Research 171, no. 3
(2006): 1020-1032.
Gopalakrishnan, B., Ramamoorthy, K., Crowe, E., Chaudhari, S. & Latif, H. (2014). A structured approach for facilitating
the implementation of ISO 50001 standard in the manufacturing sector. Sustainable Energy Technologies
and Assessments, 7, 154-165.
Gopalakrishnan, B., Selvaraj, R., Turton, R., Plummer, R.W. & Sukumar, S. (2005). A systems approach to plant-wide
energy assessment: A peer reviewed publication. Energy engineering, 102(5), 49-80.
Gopichandran, R., Shah, V.N., Patel, N.J. & Harinarayana, T. (2013). SMEs can overcome challenges and improve
sustainability through preventive management strategies: some empirical evidences from a cluster of chemical
industries in Western India. International Journal of Globalisation and Small Business, 5(3), 209-223.
Gordić, D., Babić, M., Jovičić, N., Šušteršič, V., Končalović, D. & Jelić, D. (2010). Development of energy management
system–Case study of Serbian car manufacturer. Energy Conversion and Management, 51(12), 2783-2790.
Hong, W. (2005). Industrial Energy Efficiency Project in India. Asian Development Bank
K.R. Shanmugam, P.K. (2002, October). Efficiency of Thermal Power Plants in India. Vikalpa.
Kannan, R. & Boie, W. (2003). Energy management practices in SME––case study of a bakery in Germany. Energy
Conversion and Management, 44(6), 945-959.
Law, R., Harvey, A. & Reay, D. (2016). A knowledge-based system for low-grade waste heat recovery in the process
industries. Applied Thermal Engineering, 94, 590-599.
Li, M. J. & Tao, W.Q. (2017). Review of methodologies and polices for evaluation of energy efficiency in high energy-
consuming industry. Applied Energy, 187, 203-215.
Madlool, N.A., Saidur, R., Hossain, M.S. & Rahim, N.A. (2011). A critical review on energy use and savings in the
cement industries. Renewable and Sustainable Energy Reviews, 15(4), 2042-2060.
Mulder, K. & Hagens, N.J. (2008). Energy return on investment: toward a consistent framework. AMBIO: A Journal of
the Human Environment, 37(2), 74-79.
Oluleye, G., Jobson, M., Smith, R. & Perry, S.J. (2016). Evaluating the potential of process sites for waste heat
recovery. Applied Energy, 161, 627-646.
PCS, A. (2016). A Study of Small and Medium Enterprises (SME) in India on Sustainability Strategy: Highlighting
Critical Challenges and Constraints. Journal of Asia Entrepreneurship and Sustainability, 49-81
Phylipsen, D., Blok, K., Worrell, E. & De Beer, J. (2002). Benchmarking the energy efficiency of Dutch industry: an
assessment of the expected effect on energy consumption and CO2 emissions. Energy policy, 30(8), 663-679.
Prathamesh Chavan & Prashant Jain. (2014). Sustainable Energy for Manufacturing Industry An Indian Scenario.
International Journal of Science and Research, 4(10), 756-761
Rajesh K. Singh, S.K. (2008). Challenges and strategies for competitiveness of SMEs: a case study in the Indian context.
Int. J. Services and Operations Management
Ray, S. (2011). Measuring energy intensity in selected manufacturing industries in India. Journal of Energy Technologies
and Policy, 1(1), 31-44.
Reddy, B.S. & Ray, B.K. (2011). Understanding industrial energy use: Physical energy intensity changes in Indian
manufacturing sector. Energy Policy, 39(11), 7234-7243.
Report (2015). Barriers to Industrial Energy Efficiency. Washington DC: US Department of Energy.
Rudberg, M., Waldemarsson, M. & Lidestam, H. (2013). Strategic perspectives on energy management: A case study in
the process industry. Applied Energy, 104, 487-496.
Sahu, S.K. & Narayanan, K. (2010). Decomposition of Industrial Energy Consumption in Indian Manufacturing:
The Energy Intensity Approach. Journal of Environmental Management & Tourism (De Gruyter Open), 1(1).
Saidur, R., Rahim, N.A. & Hasanuzzaman, M. (2010). A review on compressed-air energy use and energy
savings. Renewable and Sustainable Energy Reviews, 14(4), 1135-1153.
Schulze, M., Nehler, H., Ottosson, M. & Thollander, P. (2016). Energy management in industry–a systematic review of
previous findings and an integrative conceptual framework. Journal of Cleaner Production, 112, 3692-3708.
Schulze, M., Nehler, H., Ottosson, M. & Thollander, P. (2016). Energy management in industry–a systematic review of
previous findings and an integrative conceptual framework. Journal of Cleaner Production, 112, 3692-3708.
Sivill, L., Manninen, J., Hippinen, I. & Ahtila, P. (2013). Success factors of energy management in energy‐intensive
industries: Development priority of energy performance measurement. International journal of energy
research, 37(8), 936-951.
Solnørdal, M. & Foss, L. (2018). Closing the energy efficiency gap—A systematic review of empirical articles on
drivers to energy efficiency in manufacturing firms. Energies, 11(3), 518.
Soma Bhattacharya, M.L. (2010). Options for Energy Efficiency in India and Barriers to Their Adoption: A Scoping
Study. Resources for the Future.
Sumant Deshpande, D.M. (2016). Total Effective Energy Management: The Must Need for Indian Industry. International
Journal of Mechanical Engineering and Technology, 282-287
Sunil Luthra, S.K. (2015). Barriers to renewable/ sustainable energy technologies adoption: Indian perspective.
RenewableandSustainableEnergyReviews, 762-777
Thapar, M.S. (2015, April-June). PPP models for Energy Management in SMEs A step towards make in India. Energy
Future, pp. 28-33
Thollander, P. & Ottosson, M. (2010). Energy management practices in Swedish energy-intensive industries. Journal of
Cleaner Production, 18(12), 1125-1133.
Thollander, P. & Ottosson, M. (2010). Energy management practices in Swedish energy-intensive industries. Journal of
Cleaner Production, 18(12), 1125-1133.
To be manually
Trianni, A., Cagno, E. & Farné, S. (2016). Barriers, drivers and decision-making process for industrial energy efficiency:
A broad study among manufacturing small and medium-sized enterprises. Applied Energy, 162, 1537-1551.
Venkataramanaiah, S. & Parashar, S.P. (2007). Enhancing the competitiveness of SMEs through industrial clusters:
The Indian experience. International Journal of Technology Management & Sustainable Development, 6(3),
227-243.
William R. Morrow III, A.H. (2014). Assessment of energy efficiency improvement and CO2 emission reduction
potentials in India’s cement and iron & steel industries. Journal of Cleaner Production, 131-141
Worrell, E., Bernstein, L., Roy, J., Price, L. & Harnisch, J. (2009). Industrial energy efficiency and climate change
mitigation. Energy efficiency, 2(2), 109.
Xuezhi, L., Zhixia, G. & Yuetong, S. (2011). Analysis of the path to improve the energy saving technologies and
management levels in chemical industry. Energy Procedia, 5, 1269-1273.
Zhou, D.Q., Wu, F., Zhou, X. & Zhou, P. (2016). Output-specific energy efficiency assessment: A data envelopment
analysis approach. Applied energy, 177, 117-126.
Zobel, T. & Malmgren, C. (2016). Evaluating the management system approach for industrial energy efficiency
improvements. Energies, 9(10), 774.
(2018). State energy efficiency preparedness index. Alliance for an Energy Efficient Economy
Banerjee, R., Gong, Y., Gielen, D. J., Januzzi, G., Maréchal, F., McKane, A. T. & Worrell, E. (2012). Energy end-use:
industry. Gobal Energy Assessment-Toward a Sustainable Future, 513.
Bureau of Energy Efficiency (BEE). (2008). Manual on Energy Conservation in Chemical Cluster Ahmedabad. Winrock
International, India
Chan, Y., Kantamaneni, R. & Allington, M. (2015). Study on energy efficiency and energy saving potential in industry
from possible policy mechanisms. ICF Consulting Limited, London. Tratto il giorno, 6(08), 2016.
Fawkes, S., Oung, K. & Thorpe, D. (2016). Best practices and case studies for industrial energy efficiency improvement.
Institute for Industrial productivity. (2012). Financing Industrial Energy Efficiency In India: Lessons Learned and
Directions For The Future. SRC Global Inc.
Ministry of Power, GOI. (2013).Financing Energy Efficiency in India: A review of current status and recommendations
for innovative mechanisms. USAID
Mohan, P. (2017). Good Practice and Success Stories on Energy Efficiency in India.
Abstract
Plastic waste recycling continues to contribute to sustainable management of resources. Over the past 60 years, the
manufacture of plastic packaged products has increased. Majority of plastic products manufactured for the packaging
industry have substantive short life spans. These observations indicate the current utilisation of resources (petroleum)
for the manufacture of plastic materials is unsustainable. Recycling is one element of the 3Rs (reduce, recycle,
reuse) that continues to contribute to resource utilisation in the plastic industry. Opportunities to reduce quantities
of Plastic Solid Wastes (PSWs) disposal, carbon dioxide emissions and oil usage are provided through recycling.
Despite the existence of plastic recycling for many decades, quantities that are recycled vary contextually depending
on the application and plastic type. In many developed economies, high recycling rates for PSWs can be attributed
to a number of factors such as technology, regulations and value chain systems. Advanced technologies for recycling
such mechanical, feedstock, chemical, pyrolysis and glycolysis have contributed to high recycling rates in developed
economies. However, recycling rates in developing economies are still low and a number of factors have contributed.
The purpose of this research was; to assess the current status of technology in the industry in Zambia. The objectives
of the research were to; determine the types of plastics recycled, products manufactured from recycled PSWs, the
types of technology used in recycling PSWs and the technological drivers for improving recycling.
Using the database of companies listed by the Manufacturing Sector of Zambia and the Google Search Engine, a list
of plastic manufacturing and recycling companies in Zambia were identified. A descriptive research was conducted
since the research required understanding the current status on the subject matter. A total of 30 companies were
identified in Zambia and a structured questionnaire was designed and distributed to companies using sampling
without replacement. 22 companies answered the questionnaires.
The results reveal that, plastic products are manufactured by 95.5% of the companies and only 45.5% recycle PSWs.
More than 42000 tons of Polyethylene Terephthalate (PET), Polyethylene (PE, LLDPE, HDPE) and Polypropylene
(PP) is recycled per annual. The major recycling technology used by the companies is mechanical recycling and
majority of PSWs are recycled into plastic bottles and containers. Assessment of the technological drivers for
improving recycling, majority indicated ensuring material applicability in recycling processes.
This research presents the current state on the application of different types of recycling technologies for plastic
recycling as well as providing the way forward on improving recycling from a technological perspective. To
plastic recycling companies, the research has proved insights on the different types of recycling technologies for
consideration. To policy makers and future entrepreneurs in the field of sustainability, the research presents insights
on the different forms of recyclable plastics and the technology that can be implemented. Finally, the research
shows that, there is need to improve on the application of advanced recycling technologies in plastic recycling
companies of Zambia.
Keywords: Technology, Recycling, Developing Country, Sustainability, Zambia
1. INTRODUCTION
Plastic Solid Wastes (PSWs) management continues to be a worldwide challenge and in developing
economies, the challenge is greater. In most developing economies, waste management including
PSWs presents a number of challenges to the responsible stakeholders. The challenges include;
limited financial allocation to the waste management sector, unenforced regulations and legislations,
lack of structured recovery and recycling systems, limited knowledge on waste management, lack
of waste segregation systems, lack of receptacles and lack of scientific and engineering methods
for treating wastes (Henry et al., 2006; Hui et al., 2006; Saxena et al., 2010; Pattnaik and Reddy.,
2010; Reinhart et al., 2016; Mohsen and Aghezzaf., 2015; Arbulú et al., 2016; Gobbi et al., 2017).
Despite these challenges facing developing economies, sustainable management of PSWs is
critical for resource conservation and efficient utilization. To this regard, a number of sustainable
engineered concepts for managing wastes exist and these are not limited to reduce, reuse, recycle,
remanufacture and energy recovery. It is important to note that, in developed economies, application
of advanced technology to the management of PSWs contributes to high recycling and recovery
rates (Hopewell et al., 2009; Xevgenos et al., 2015). Sustainable recovery for efficient utilization is
critical to achieving a circular economy. In the plastic manufacturing industry, a number of products
are manufactured with a short life-cycle. Hopewell et al. (2009) points out that, appropriately 50%
of packaging plastic products are single-use disposable products. Coupled with this, appropriately
4% of the world gas and oil is used as feedstock for plastics while 3-4% is used for energy provision
during manufacturing. As a result of these two observations, it is necessary to understand the
different aspects of efficient utilization of PSWs with the intent to conserve the none-renewable
resources. Therefore, this study focuses on assessing the different types of technologies used in the
recycling and recovery of PSWs.
A number of studies have focused attention on aspects for managing PSWs. Al-Salem et al. (2009)
conducted a study on the recovery and recycling routes for PSWs. This study looked at the different
types of recycling technologies used for managing PSWs. Hopewell et al. (2009) assessed the
challenges and opportunities for PSWs recycling. A number of challenges and opportunities are
highlighted and the study indicates that, technological and economic challenges are trending. Other
studies have focused attention on PSWs recycling (Brems et al., 2009; Scheirs, 2009; Paolucci et al.,
2010; Welle et al., 2011).
This study focuses on assessing the different technologies used in the recycling of PSWs. A number
of plastic recycling and manufacturing companies are assessed in Zambia. The objectives are to;
i. Determine the different types and amount of plastics products manufactured by the
companies on a monthly basis.
ii. Identify the different types of recycling technologies existing in developed
economies
iii. Assess the types of plastic recycling technologies used in Zambia
iv. Identify the different types of products manufactured from recycled plastics
v. Assess technological drivers for improving recycling in Zambia
2. Recyclable Plastics
Different types of plastic materials are manufactured and each type possess different characteristics.
According to the heating properties, plastics are divided into thermoplastics and thermosetting. As a
result of a number of favourable properties possessed by plastics, one of the key properties is ability
to be recycled and a number of thermoplastics are recycled into other products easily. According
to Plastic Wastes (2009), recyclable plastic consists of Poly Vinyl Chloride (PVC), Polypropylene
(PP), Polyethylene Terephthalate (PET), Low Density Poly Ethylene (LDPE), Polystyrene
and High-Density Poly Ethylene (HDPE). Plastic Recycling (2009) indicates that, majority of
recyclable plastic are manufactured into plastic packs, bags, bottles and many other post-consumer
packaging products.
It is necessary to understand the different products into which different types of recycled plastics
are manufactured. For PET, different products such as roasting bags, bottles, food trays, audio/
video tapes, container and many mechanical components are manufactured from its recycled plastics
(Shen et al., 2009). PET has become of the favourable recycling plastics as result of its incredible
recycling properties (Welle et al., 2011; Ezeah et al., 2013). PS recycled material is used in
the manufacture of food containers, toys, bottles and kitchen are (Plastic Recycling, 2009).
PP recycled material is usually manufactured into ropes, netting, crates, wine barrel and many other
(Plastic Recycling, 2009). PVC recycled material is mainly used for manufacturing building panels,
irrigation pipes, thin sheeting, window frames etc. (Plastic Recycling, 2009). PE consists of HDPE
and LDPE. LDPE recycled material is mainly manufactured into bottles, hosepipes, film bags etc.
while HDPE is manufactured into toys, industrial bags, cosmetic and detergents containers etc
(Waste Plastics, 2009).
3. Recycling Technologies
To achieve sustainability in the plastic industry, several types of recycling technologies exist and the
core purpose of each technology is to transform end-of-life plastic products into new ones. Al-Salem
et al. (2009) conducted a study on different types of plastic recycling technologies and the following
were studied; mechanical, feedstock, chemical and pyrolysis.
For example, mechanical recycling is widely used for recycling single plastic materials such as
PET, PE, PS, PP and other types (Al-Salem et al., 2009). Most plastic products used for day to
day activities are recycled via mechanical recycling (i.e. bottles, stationery, bags, blinds etc).
As a result of the environmental and economical benefits, majority of the recycling industries favour
mechanical recycling (Al-Salem et al., 2009).
Chemical recycling converts plastics into smaller molecules gases or liquids for utilization as
feedstock in petrochemical production (Mastellone, 1999). Feedstock recycling focuses on
converting PSWs into valuable and quality raw materials for manufacturing petrochemicals and new
plastics (Brems et al., 2012). Pyrolysis recycling converts heterogeneous PSWs for energy recovery
purposes (Scheirs, 2009; Paolucci et al., 2010).
4. Technological Drivers
BIO Intelligence (2013) alludes that, technological advancements have enabled the reducing of
recycling costs and contributed to bridging the gap between virgin and recycled plastics. To sustain the
plastic industry, a number of technological drivers are relevant to implement. A number of studies have
highlighted different and relevant technological drivers for consideration in the plastic industry such as;
improved recycling infrastructure and technology, improved sorting and size reduction technologies,
improved design for recyclability and applicability of recycled materials into manufacturing processes
(BIO Intelligence, 2013; Scheirs, 2009, Bremes et al., 2013; Welles et al., 2011). Implementation of
technological and other drivers in the plastic industry is likely to shift the existing gap for attaining
sustainable resource utilization and value chains positively.
5. Methodology
7. CONCLUSION
The study has assessed a number of factors that can contribute to sustainable recycling and
recovering of PSWs. The different types of PSWs, recycling technologies and recycled products
contribute greatly to the eco-image of sustainable value chains in the plastic industry and mostly
to the stakeholders in PSWs treatment, recovery and recycling industry. Utilization of end-of-life
products will benefit the current drive for achieving a circular economy as well as bridging the
existing gap of plastic recycling in lower and medium income countries.
Different types of recycling technologies have been assessed and mechanical recycling is the mostly
used technology among the assessed companies. Both developed and developing economies use
mechanical recycling for recycling majority of end-of-life plastic products. For the practical application
of advanced recycling technologies, understanding the technological drivers is relevant and the study
has stressed major drivers for consideration as sustainable value chains are created. To ensure practical
application of a number of recycling technologies, products manufactured from recycled plastics are
outlined. This aspect to important for concerned PSWs recyclers and upcoming recyclers.
It is important to understand and consider technology as one of the driving forces to achieving
sustainability in the recycling industry. Therefore, this information is important to the plastic
industry, policy makers and waste managers. In developing economies, application of advanced
recycling technologies is key to achieving competitive recycling and energy recovery rates.
8. ACKNOWLEDGEMENTS
The authors are grateful to the Plastic recycling and manufacturing companies that took time in
responding to the questionnaires. Special thanks are extended to the University of Johannesburg for
the financial support.
References
Al-Salem, S.A., Lettieri, P. and Baeyens, J.,. 2009. “Recycling and recovery routes of plastic solid waste (PSW):
A review.” Waste Management 29: 2625–2643.
Arbulú, I., Lozano, J. and Rey-Maquieira, J., 2016. “The challenges of municipal solid waste management systems
provided by public-private partnerships in mature tourist destinations: The case of Mallorca.” Waste
Management 51: 252–258.
Bing, X., Bloemhof-Ruwaard, J.M. and van der Vorst, J.G.A,. 2014. “Sustainable reverse logistics network design for
household plastic waste.” Flex Serv Manuf J 26: 119-142.
Binnemans, K., Jones, P.T., Blanpain, B., Van Gerven, T., Yang, Y., Walton, A. and Buchert, M,. 2013. Recycling of
rare earths: a critical review.” Journal of Clean Production 21: 1-22.
BIO Intelligence Service. 2013. “Study on an increased mechanical recycling target for plastics.” final report prepared
for Plastic Recyclers Europe.
Brems, A., Baeyens, J. and Dewil, R. 2012. “Recycling and recovery of post-consumer plastic solid waste in a European
context.” Therm. Sci. 16 (3): 669–685.
Dias J.K.T.S. and Braga, S.S. 2016. “The use of reverse logistics for waste management in a Brazilian grocery retailer.”
Waste Management & Research 34 (1): 22-29.
Ezeah, C., Fazakerley, J.A. and Roberts, C.L,. 2013. “Emerging trends in informal sector recycling in developing and
transition countries.” Waste Management 33: 2509-2519.
Ezeah, C., Fazakerley, J.A. and Roberts, C.L,. 2013. “Emerging trends in informal sector recycling in developing and
transition countries.” Waste Management 33: 2509-2519.
Ghauri, P. and Grønhaug, K,. 2005. Research Methods in Business Studies: A Practical Guide. . Edited by 3rd. Harlow:
Financial Times Prentice Hall.
Gobbi, C.N., Sanches, V.M.L., Pacheco, E.B.A.V., Guimarães, M.J.O.C. and de Freitas, M.A.V,. 2017. Management
of plastic wastes at Brazilian ports and diagnosis of their generation, Marine.” Marine Pollution Bulletin
124: 67-73.
Grinnell, R.M. and Williams, M,. 1990. Research in social work: a primer. Itasca. Ill : Peacock.
Henry, R.K., Yongsheng, Z. and Jun, D,. 2006. “Municipal solid waste management challenges in developing
countries–Kenyan case study.” Waste Management 26 (1): 92-100.
Hopewell, J., Dvorak, R. and Kosior, E.,. 2009. “Plastics recycling: challenges and opportunities.” Phil. Trans. R. Soc.
B 364 34: 2115-2126.
Hui, Y., Li, W., Fenwei, S. and Gang, H. 2006. “Urban solid waste management in Chongqing: challenges and
opportunities.” Waste Management 26: 1052-1062.
Mastellone, M.L., 1999. Thermal treatments of plastic wastes by means of fluidized bed reactors . Ph.D. Thesis, Italy.:
Department of Chemical Engineering, Second University of Naples.
Mohsen, S,. 2015. “A framework for sustainable waste management: challenges and opportunities.” Management
Research Review.
Murakami, F., Sulzbach, A., Pereira, G.M., Borchardt, M. and Sellitto, M.A,. 2015. “How the Brazilian government can
use public policies to induce recycling and still save money?” Journal of Cleaner Production 96: 94-101.
Paolucci, M., De Filippis, P. and Borgianni, C.,. 2010. “Pyrolysis and Gasification of Municipal and Industrial Wastes
Blends.” Thermal Science 14 (3): 739-746.
Pattnaik, S. and Reddy, M.V., 2010. “Assessment of Municipal Solid Waste Management in Puducherry (Pondicherry),
India,.” Resources, Conservation and Recycling 54: 512-520.
Reinhart, D., Bollard, C.S. and Berge, N., 2016. “Grand Challenges – Management of municipal solid waste.” Waste
Management 49: 1-2.
Sarkis, J., Helms, M.M. and Hervani, A.A., 2010. “Reverse logistics and social sustainability.” Corp. Soc. Responsibility
Environ. Manag 17 (6): 337-354.
Saxena, S., Srivastava, R.K. and Samaddar, A.B., 2010. “Towards sustainable municipal solid waste management in
Allahabad City.” Management of Environmental Quality: An International Journal 21 (3): 308 – 323.
Scheirs, J., 1998. Polymer Recycling: Science, Technology and Application. 1st. Wiley-Blackwell.
Welle, F., 2011. “Twenty years of PET bottle to bottle recycling—An overview.” Resources, Conservation and
Recycling 55: 865-875.
Xevgenos, D., Papadaskalopoulou, C., Panaretou, V., Moustakas, K. and Malam, D. 2015. “Success Stories for
Recycling of MSW at Municipal Level.” Waste Biomass Valor 6: 657-684.
Shilpi Shrivastava
NITIE, Environmental Engineering & Management, India
E-mail: Shilpi.shrivastava.2016@nitie.ac.in
Prof. Seema Unnikrishnan
NITIE, Environmental Engineering & Management, India
E-mail: seemaunnikrishnan@nitie.ac.in
Abstract
Introduction and Purpose: The oil and gas sector is the subject of key interest and concern because of its
increasing demand, the dependency of various sectors and high environmental impacts. Since this sector is growing
drastically over a period of time, it is their foremost responsibility to make necessary changes in its supply chain.
The Life cycle assessment of this sector will give us the idea to enumerate the various emissions, energy use, fuel
usage, raw material requirement, resource consumption, material and energy balances related to each life cycle
stages. By performing the detailed literature review, we know the various environmental impacts in each stage,
existing life cycle models, different LCA methodologies and various cleaner technologies for the oil and gas sector.
Based on the literature analysis, we have presented some discussions on recent trends in the oil and gas sector,
cleaner technologies and propose future research directions on performing LCA study.
Methodology: A detailed literature review was done by identifying the research papers focusing on the LCA
in oil and gas sector. The database referred were EBSCOhost, Science Direct, Google Scholar, Web of science.
The literature search is limited to academic search from 1990 to 2018.
Findings: There are many studies on LCA in oil and gas sector but none in Indian context focusing full cradle to
grave analysis. In India despite a regulatory lid on polluting fuels, the overall fuel demand showed a healthy trend
in 2017-18 on the back of strong growth in transportation fuels. The total consumption of petrol was increased from
10.14 percent to 26.17 MT, while diesel consumption grew by 6.63 percent to 81 MT in 2018. Various studies have
confirmed that the main environment polluting hotspot identified in the supply chain was the refining activity, the
maximum CO2e emissions is from the exploration and drilling stage i.e., 60-65% and the local pollutant emission is
maximum in the oil usage phase which is approx SOx emissions is 5.45 MT, NOx is 6.88 MT and black carbon 8.5
MT. Some of impact categories with their values are Climate change potential 3.9*10-1 kg CO2 eq, ozone depletion
potential 1.1*10-9 kg CFC-11 eq, human toxicity potential 1.1*10-3 kg1,4 DB eq and acidification potential 1.0*10-3
kg SO2 eq.
Contributions: The results can be used in the comparative assessment of different crudes, by the government
and the industry for decision making, by the various stakeholders and researchers who are conducting LCA and
proposing models for systems that are using the petrochemical products in different context. LCA can also help in
evaluating the available options and suggesting more sustainable alternatives so that the dependency on the energy
sector can be minimized. Apart from environmental sustainability, economic and social sustainability are also the
hotspots to be researched
Keywords: Life Cycle Assessment, Life Cycle Models, Emissionsm, Environmental Impacts
1. Introduction
The oil and gas sector is an important aspect of the world economy. It has the potential to cause
severe environmental degradation, not only to the physical environment, but also to the health,
culture, and economic and social structure of local and indigenous communities (Wawryk, 2002).
Since this sector is growing drastically over a period of time, it is their foremost duty to make
necessary changes in its supply chain. Oil and gas companies are representing a considerable portion
of wealth in the midst of the world’s major industries.
According to the 2015 United Nations Climate Change Conference, India is the third largest GHG
emitter in the world. India and other developing countries are focusing more on the alternate fuels,
but the transportation sector is still dependent on conventional fuels. This is due to the reason that
alternate fuels which are assumed to be cleaner are emitting more carbon dioxide as compared to
conventional fuels per unit production of energy (Grubb, 2001) and the extraction of energy from
these renewable sources require high initial costs, lack of social acceptance and severe competition
from current fossil fuels (Chang & Yong, 2007). Therefore the existing oil and gas industry requires
a lot of attention for the implementation of sustainable and green practices (Raut et al., 2018).
Life Cycle Analysis (LCA) is a technique to assess environmental impacts associated with all the
stages of a product’s life from cradle to grave, that is, from raw material extraction through materials
processing, manufacture, distribution, use, repair and maintenance, and disposal or recycling
(US Environmental Protection Agency, 2010). But according to the recent literature
(Jacquemin et al., 2012), LCA can be used as a tool for assessment of processes and can be used to
study the supply chain and make it more sustainable.
The oil and gas sector is divided into three major components i.e., upstream, midstream and
downstream. The upstream is also known as Exploration and Production (E&P) and is responsible
for the searching of natural oil fields and drilling underground wells. The midstream sector is the
storage and transportation of crude oil; it links the upstream and downstream sector. The downstream
sector is of refining the crude oil, storage distribution, and marketing. Emissions through direct
combustion of fossil fuels are easily recognized as part of the fuel process chain, but the emissions
associated with other links in the supply chain is less understood.
2. Research Methodology
3. Literature Review
The LCA approach was not recognized by many industries but the methodology was gradually
getting accepted. Few sectors such as soft drinks, plastics, personal care products, detergents, and
automobiles were known to be pioneers investing in LCA. This was followed by other sectors like
manufacturing industries, agriculture, mining, oil and gas extraction, construction/building material
sector, and retailing, and more recently by infrastructure industries (electricity, gas and water supply,
transport, storage, and communication) (Jacquemin et al., 2012).
producing treated effluent (pH 6-8.5, sulphide < 0.5 ppm, COD < 50 ppm, oil and grease < 5 ppm,
phenol < 0.35 ppm) meeting guarantee parameters for reuse for various effluents.
The demand for oil is growing very rapidly with the economic expansion which is increasing the
production. There are 3 main challenges faced by the oil & gas sector which is Pollution, global
climate change and impact on bio-diversity (Arscott, 2004). The increase in production cause
environmental damage in each stage of its life cycle from exploration to refining to its final
consumption which is generally referred as Well-to-Wheels (WTW). The effect of pollution is on the
regional level as well as global level. The majority of pollution is from the oil refineries which are
consuming large amounts of energy and water, producing large quantities of wastewaters, releasing
hazardous gases into the atmosphere and generating solid waste that is difficult both to treat and
to dispose of (Mariano, Lèbre & Rovere, n.d.). Apart from environmental pollution, it also affects
human health by causing respiratory diseases. (Morsali, S. 2018)
3.3. Review of Existing Life Cycle Models for Oil and Gas Sector
The life cycle models have been proposed by various researchers working on LCA which can
be easily understood by the readers. The models prepared must be verified by both expert and
non-expert LCA users so that the proposed models can be made more perfect and user-friendly
(Vineyard & Ingwersen, 2017). These models can be used for future exploration and to establish the
relationship between methodologies which can result in more collaborative, in-depth assessments
(Vineyard & Ingwersen, 2017).
Some of the models are described below-
3.3.3. Sengupta
This model was proposed for US petroleum refinery operations, which helps in estimating the impacts
of refinery operations. The model describes the allocation factors, air emissions, and products and
supports the emission modeling research carried by Sengupta and others at the Environmental
Protection Agency (EPA) (Vineyard & Ingwersen, 2017).
3.3.4. GHGenius
GHGenius model can estimate the air emissions for past, present, and future (through to 2050).
It analyzes the greenhouse gas (GHG) emissions and other air emissions related to the production
and usage of conventional and alternative transportation fuels (Vernel, Fleming 2006). This is
done using the historical data and correlations that are stored in the model and changes with time.
This model is much suitable for Canadian application (Vernel, Fleming 2006)
3.4.1. Eco-indicator 99
It is one of the most widely used impact assessment methods in LCA. It is the successor of
Eco-indicator 95, the first endpoint impact assessment method, which allowed an environmental
load of a product to be expressed in a single score. (Pre consultant). Garg, Vishwanathan & Avashia,
(2013) uses eco-indicator 99 method to compare the life cycle impacts on ecosystem quality, human
and resources. Nanaki & Koroneos, (2012) also used this method to compare the LCA of Diesel,
Biodiesel and gasoline and the various impact categories.
Assessment
Boundaries
Categories
Identified
Variables
Findings
software
Authors
/Model
Impact
(Year)
Scope
LCA
Garg Well-to Sima Emissions Human health, 1. The crude oil source should To implement
et al. -Storage Pro from acidification, be considered the differential
(2013) different eutrophication 2. Total transportation environmental taxes,
transportat emissions are higher, but not the research should
ion fuel, high enough as compared to first focus on impact
energy other stages in the complete assessment.
efficiency LCA of transportation fuels.
Bicer, Cradle- Sima human ozone layer To achieve sustainable and This study is limited
Dincer to-grave Pro toxicity depletion, Global clean transportation, the only to the
(2018) values, warming, Abiotic attention should be on the environmental
depletion, eco-friendly and cost-effective impacts, for the
acidification, production of vehicles, further research life
eutrophication, batteries and cycle costing
human toxicity, alternative fuels. of these alternative-
and terrestrial fueled vehicles can
ecotoxicity be performed.
Rahman, Well-to- FUNNEL Energy use, Global Warming GHG emissions are calculated As a future scope
M. M., Wheel -GHG- emission Potential using FUNNEL-GHG-CCO of this study, The
Canter, CCO factors model. This model considers results can be used
C. & all the life cycle stages of in the comparative
Kumar, production of crude oil from assessment of
A.(2015) extraction to the combustion different crudes and
in the engines. Amongst all by the government
the crudes considered in the and the industry for
paper, gasoline has higher decision making.
GHG emissions than both
diesel and jet fuel. This is due
to high energy consumption in
gasoline production.
Iribarren, Case Not electricity Global warming, The research paper focuses Not specified
D., study Specifie generation, photochemical on the LCA study of the
Peters, D natural gas oxidant formation, production of biofuels
J.F. & production, cumulative energy from the fast pyrolysis of
Dufour, and direct demand, biomass system. This shows
J. (2012) emissions acidification, land that the pretreatment of the
competition, ozone lignocellulosic biomass
layer depletion, feedstock (drying and
and grinding), the pyrolysis process
eutrophication and the steam reforming
of natural gas to provide
the hydrogen used in the
hydroprocessing stages were
the sources with the highest
environmental impact.
Vineyar Well-to- Review Not well-to-pump This paper has demonstrated This comparison
d, D.L.& pump and specified emissions the can be used by the
Ingwers compari differences and evaluated various stakeholders
en, W.W. son of the data quality of five LCA and researchers
(2017) various models. who are conducting
LCA LCA and making
models models for systems
that make use of
petroleum products.
Assessment
Boundaries
Categories
Identified
Variables
Findings
software
Authors
/Model
Impact
(Year)
Scope
LCA
Matos, Cradle- Not Risk Global warming The author argues that shift The proposed
S. & to-grave specifie Manageme potential, ozone towards the sustainable frameworkwill
Hall, J. D nt,Stakehol depletion, eco- development has increased help managers to
(2007) der theory toxicity, energy the complexities and given determine if LCA is
consumption, indefinite challenges that many appropriate or not.
nitrification and environmental management
acidification techniques cannot address. It
has also provided a framework
that addresses these issues
and discusses implications for
practitioners and management
theory.
David D. Producti Simapro Emissions Not specified In this work, LCA of the Pyrolysis of biomass
Hsu on to production of gasoline and for fuels has been
(2012) end use diesel from forest residues less well studied than
via fast pyrolysis and gasification and the
hydroprocessing is performed. greater uncertainty
Grid electricity and natural range around fuel
gas used account for 81% of yield contributes
the net GHG emissions in the to the more
base case. skewed uncertainty
distribution than for
gasification in the
previous work
Luo, L., Gate-to- CMLCA Impact Abiotic depletion, The research has focused In the future case
Van Der grave (Chain assessment, GHG emissions, on the LCA of gasoline and scenario ethanol
Voet, E., Manage fuel usage Ozone layer ethanol as fuels and results industry can be made
& -ment depletion, showed that ethanol fuels more economically
Huppes, by LCA Photochemical are better than gasoline, attractive by studying
G. oxidation, Human while gasoline is a better its cost model
(2009) and eco-toxicity, fuel where human toxicity, and technological
Acidification, ecotoxicity, acidification and development can
Eutrophication eutrophication are concerned. be studied which
helps in lowering
the environmental
impacts.
Garraín, Well-to- Not Temperat- fossil energy The research shows that HBD the matter of
D., tank specifi- ure use and GHG (Hydrobiodiesel) systems have indirect Land Use
Herrera, Ed emissions good environmental & Change (iLUC),
I., technical performance when which is leading
Lechón, its compared to FAME (Fatty to higher GHG
Y. & Acid Methyl Ester) and emissionsrelated to
Lago, C. diesel. Regarding the impact biofuel or renewable
(2014) categories analyzed, the diesel production
reductions in terms of fossil
energy use and GHG emissions
could attain 2% and 9% resp.
Assessment
Boundaries
Categories
Identified
Variables
Findings
software
Authors
/Model
Impact
(Year)
Scope
LCA
Nanaki, well-to- Simapro Energy Ecotoxicity, The author has compared the This study can be
E.A., & wheel 5.0 Prices, Acidification, environmental impacts ofthe considered as an
Koroneo investment inorganic use opportunity for
s, C.J. and respiratory effects, of gasoline, diesel, and further research
(2012) operation fossil fuels, biodiesel and evaluate the
cost eutrophication, in Greece. From the available options
Organic respiratory environmental point of view, for a sustainable
effects, greenhouse biodiesel seems to be eco- transportation system
effect friendly because the GHG planning in Greece.
andcarcinogenic emissions are very ow as
effects. compared to gasoline and
diesel.
Methane emission is also low.
But, the use of biodiesel as the
transportation fuel increases
emissions of PM10, nitrous
oxide, nitrogen oxides (NOx)
as well as nutrients such as
nitrogen and phosphorous;
which is the main reason for
eutrophication.
Morales, well-to- Simapro Acidification, The outcomes of refining Future improvements
M., wheel v8 human toxicity, activities and use of gasoline in of
Gonzale Climate change, cars are extremely sensitive to technologies in
z-García, Ozone depletion, the allocation approach gasoline production
S., terrestrialecotoxicit considered. The maximum and transport sector
Aroca, y, water depletion, impacts were found in the can be done. It can
G., & marine economic allocation, then by be identified as the
Moreira, eutrophication, the volume allocation and key subsystems
M.T. mineral depletion lastly energetic allocation. The within the life cycle
(2015) photochemical high impacts resulting from the of gasoline.
oxidation economic allocation were due
formation, marine to the high price assigned to
ecotoxicity, the gasoline in the Chilean
terrestrial market
freshwater
eutrophication,
freshwater
ecotoxicity and
fossil depletion
Morales Chile distance Well to Simapro software climate change (CC), The majority of emissions
et al. of 1 km Wheel v8 ozone depletion (OD), is from refining process
(2014) driven human toxicity (HT), and combustion phase.
bya photochemical oxidation Climate change is the
middle formation (POF), main impact category
size terrestrial acidification identified which is due to
passeng (TA), freshwater these emissions from the
er car eutrophication (FE), refinery and combustion
marine eutrophication phase. The climate change
(ME), terrestrial impact category is 3.9.
ecotoxicity (TET), 10-1 kg CO2 eq which is
freshwater ecotoxicity highest among all impact
(FET), marine ecotoxicity categories studied.
(MET), water depletion
(WD), mineral depletion
(MRD) and fossil
depletion (FD).
Restianti Indon- 1 KL of Cradle to CML 2000 method Global warming potential The results showed that
and esia gasoline gate (GWP), acidification the combustion phase
Ghee- potential (AP), contribute 93%, 84%,
wala eutrophication potential 95% for the Global
(2012) (EP), abiotic resource Warming potential,
depletion potential Acidification potential
(ADP), human toxicity and eutrophication
potential (HTP) and potential respectively
ecotoxicity potential followed by oil refining
(ETP). and then by crude
extraction phase. GWP
for the combustion phase
is 3.35W+04 g CO2 eq.
and for full process chain
is 3.61E+04
Rahman North 1 MJ of Well to LCA Model GHG emissions The result showed that
et al. America fuel Wheel FUNNEL-GHG- gasoline has high GHG
(2014) CCO emissions than both
diesel and jet fuel which
is due to higher energy
consumption The well-to-
wheel GHG emissions for
the three transportation
fuels range from 97.55
g-CO2eq/MJ-gasoline
to 127.74 g-CO2eq/ MJ-
gasoline, 95.01 g- CO2eq/
MJ-diesel to 126.02
g-CO2eq/MJ- diesel, and
88.17 g-CO2eq/MJ-jet
fuel to 118.17 g-CO2eq/
MJ-jet fuel
Nguyen Thailand 1 gasoline Cradle to Not specified net energy use, fossil The results show that
and equivalent grave energy use, GWP, AP, using MoE in the form
Gheewal consumed and NP of E10 as a gasoline
a (2008) by a new substitute leads to fossil
passeng energy and petroleum
er car to savings
travela
specific
distance
usage, fuel usage, raw material requirement, resource consumption, material and energy balances
related to each life cycle stages and the environmental impacts from these stages. It has also identified
the major impact categories like according to the study done by Rahman et al. (2014), Morales
et al. (2014), Transportation phase and combustion phase are responsible for nearly half of the
impact which is followed by the refinery. SOx and NOx are the major pollutants.
In the review of various papers, it is found that while selecting a boundary for doing LCA it is
important to consider the source and all the stages where the emissions and environmental impacts
are higher. According to one report on Global Climate Disclosure Framework in the year 2012 for
oil and gas companies, the bulk of GHG emissions generated through the oil and gas lifecycle are in
the consumption and combustion of the final product, So while doing the LCA study this stage has to
be considered. Literature also argues that the shift towards sustainable development have increased
complexities and presented indefinite challenges that many current environmental management
techniques cannot adequately address the issue (Matos & Hall, 2007).
The main impact categories studied are the Global Warming Potential (GWP), Climate Change
(CC), Ozone Depletion Potential (ODP), Acidification Potential (AP), Eutrophication Potential
(EP) and Human Toxicity Potential (HTP). Garg et al. (2013), Bicer, Dincer (2018), Iribarren et al.
(2012), Matos et al. (2007), Luo et al. (2009), cavalett et al. (2012) have identified these as impact
categories.
We have compared five LCA studies done by cavalett et al. (2012), Morales et al. (2014), Restianti
and Gheewala (2012), Rahman et al. (2014), Nguyen and Gheewala (2008) in different countries and
found that there is difference in LCA result due to factors such as geographical locations, refining
technology, fuel price supply, and demand, source of crude oil and other methodological factors
such as data quality, system boundary and databases.
In spite of so many technological innovations, we are still in the phase of conventional refineries
which needs to be upgraded. Various clean technologies are identified and used such as flare gas
recovery system, vapor recovery system, tail gas treatment which has helped in minimizing the
emissions but, Since the world has moved towards the concept of biorefinery and using the green
methods such as biodesulphurization (BDS), We also need to be more advanced in making oil and
gas supply chain a sustainable Green supply chain.
5. Conclusion
This paper gives a brief idea of the present various LCA models used in different context by authors
and various LCA methods and their impact categories. Different technologies used in this sector is
also. The Life cycle assessment of the oil and gas sector performed by various authors in different
countries has been reviewed but there is very limited study in the Indian context. The LCA studies
have given the complete insight of supply chain of oil and gas sector and helped to identify the Life
cycle stages which are more environmentally intensive. It is concluded that the LCA studies help us
in estimating the available options for more sustainable transportation.
References
Arscott, L. (2004). Sustainable development in the oil and gas industry. Journal of energy resources technology, 126(1),
1-5.
Asghari, M. & Rakhshanikia, M. A. (2013). Technology transfer in oil industry, significance and challenges. Procedia-
Social and Behavioral Sciences, 75, 264-271.
Aung, T.S. (2017). Evaluation of the environmental impact assessment system and implementation in Myanmar: Its
significance in oil and gas industry. Environmental Impact Assessment Review, 66(January), 24–32
Bicer, Y. & Dincer, I. (2018). Resources , Conservation & Recycling Life cycle environmental impact assessments and
comparisons of alternative fuels for clean vehicles. Resources, Conservation & Recycling, 132 (September
2017), 141–157. https://doi.org/10.1016/j.resconrec.2018.01.036
Burnham, A., Han, J., Clark, C.E., Wang, M., Dunn, J.B. & Palou-Rivera, I. (2011). Life-Cycle Greenhouse Gas
Emissions of Shale Gas, Natural Gas, Coal, and Petroleum. Environmental Science & Technology, 619–627.
https://doi.org/10.1021/es201942m
Di Lullo, G., Zhang, H. & Kumar, A. (2016). Evaluation of uncertainty in the well-to-tank and combustion greenhouse
gas emissions of various transportation fuels. Applied energy, 184, 413-426.
E. La Rovere, J. Mariano. (June 12, 2015). Environmental Impacts of the Oil Industry [Online]. Available:
http://www.eolss.net/sample-chapters/c08/e6-185-18.pdf
Eriksson, M. & Ahlgren, S. (2013) LCAs of petrol and diesel- a literature review. SLU, Swedish University of
Agricultural Science Department of Energy and Technology.
Frischknecht R., Jungbluth N., Althaus H.J., Doka G., Dones R., Heck T., Hellweg S., Hischier R., Nemecek T.,
Rebitzer G. and Spielmann M., 2005, The ecoinvent database: Overview and methodological framework,
International Journal of Life Cycle Assessment 10, 3–9.
Garg, A., Vishwanathan, S. & Avashia, V. (2013). Life cycle greenhouse gas emission assessment of major petroleum
oil products for transport and household sectors in India. Energy Policy, 58, 38–48. https://doi.org/10.1016/j.
enpol. 2013.02.018
Garraín, D., Herrera, I., Lechón, Y. & Lago, C. (2014). Well-to-Tank environmental analysis of a renewable diesel fuel
from vegetable oil through co-processing in a hydrotreatment unit. Biomass and bioenergy, 63, 239-249.
Goedkoop, M., Heijungs, R., Huijbregts, M., De Schryver, A., Struijs, J. & Van Zelm, R. (2009). ReCiPe 2008. A life
cycle impact assessment method which comprises harmonised category indicators at the midpoint and the
endpoint level, 1.Granovskii, M., Dincer, I. & Rosen, M.A. (2006). Life cycle assessment of hydrogen fuel
cell and gasoline vehicles. International Journal of Hydrogen Energy, 31(3), 337-352.
Grubb, M. (2001), “Who’s afraid of atmospheric stabilization? Making the link between energy resources and climate
change”, Energy Policy, Vol. 29 No. 1, pp. 837-845
Guinée J. (2016) Life Cycle Sustainability Assessment: What Is It and What Are Its Challenges?. In:
Clift R., Druckman A. (eds) Taking Stock of Industrial Ecology. Springer, Cham
Guinée, J.B., Heijungs, R., Huppes, G., Zamagni, A., Masoni, P., Buonamici, R., Ekvall, T. & Rydberg, T. (2011). Life
cycle assessment: Past, present and future. Environmental Science and Technology, 45(1), 90–96.
Guinée, J.B., Gorrée, M., Heijungs, R., Huppes, G., Kleijn, R., Koning, A. de, Oers, L. van, Wegener Sleeswijk, A.,
Suh, S., Udo de Haes, H.A., Bruijn, H. de, Duin, R. van, Huijbregts, M.A.J. (2002). Handbook on Life Cycle
Assessment. Operational Guide to the ISO standards. I: LCA in perspective. IIa: Guide. IIb: Operational
annex. III: Scientific background. Kluwer Academic Publishers, Dordrecht
Håvard Devold. (2013). Oil and gas production handbook An introduction to oil and gas production, transport, refining
and petrochemical industry.
Hawkins, T.R., Singh, B., Majeau‐Bettez, G. & Strømman, A.H. (2013). Comparative environmental life cycle
assessment of conventional and electric vehicles. Journal of Industrial Ecology, 17(1), 53-64.2
Hawkins, T.R., Gausen, O.M. & Stromman, A.h. (2012). Environmental impacts of hybrid andelectric vehicles-a review.
The International Journal of Life Cycl(8). 997-1014.
Hsu, D.D., O’Donoughue, P., Fthenakis, V., Heath, G. A., Kim, H. C., Sawyer, P. & Turney, D.E. (2012). Life cycle
greenhouse gas emissions of crystalline silicon photovoltaic electricity generation. Journal of Industrial
Ecology, 16(s1).
Iribarren, D., Peters, J.F. & Dufour, J. (2012). Life cycle assessment of transportation fuels from biomass pyrolysis.
Fuel, 97, 812-821.
ISO (1998): Environmental Management—Life Cycle Assessment—Principles and Framework. International Standard
14041. International Standards Organization (ISO), Geneva, Switzerland
Jacquemin, L., Pontalier, P.Y., Sablayrolles, C. (2012). Life cycle assessment ( LCA ) applied to the process industry: a
review To cite this version: HAL Id: hal-00741389. https://doi.org/10.1007/s11367-012-0432-9
Jolliet, O., Margni, M., Charles, R., Humbert, S., Payet, J., Rebitzer, G. & Rosenbaum, R. (2003). IMPACT 2002+: a
new life cycle impact assessment methodology. The international journal of life cycle assessment, 8(6), 324.
Keesom, B., Blieszner, J., Unnasch, S. (2011) EU Pathway Study: Life Cycle Assessment of Crude Oils in a European
Context, Exectutive Summary, Jacobs Consultancy, Calgary, Canada
Klöpffer, W. (2008). Life cycle sustainability assessment of products. International Journal of Life Cycle Assessment,
13(2), 89–95.
Luo, L., Van Der Voet, E. & Huppes, G. (2009). Life cycle assessment and life cycle costing of bioethanol from
sugarcane in Brazil. Renewable and Sustainable Energy Reviews, 13(6-7), 1613-1619.
Matos, S. & Hall, J. (2007). Integrating sustainable development in the supply chain: The case of life cycle assessment
in oil and gas and agricultural biotechnology. Journal of Operations Management, 25(6), 1083–1102. https://
doi.org/10.1016/j.jom.2007.01.013.
Mahony S. (2011). Life Cycle Assessment of Biodiesel from Cannabis Sativa L for transportation fuel in UK, University
of East Anglia.
Mariano, J.B., Lèbre, E. & Rovere, L. (2000) Environmental impacts of the oil industry
Mckinsey & Company (2009). Paths to low carbon economy-version 2 of the global green house gas abatement cost
curve. Chicago IL, USA:Mckisney & company.
Morales, M., Gonzalez-García, S., Aroca, G. & Moreira, M. T. (2015). Life cycle assessment of gasoline production and
use in Chile. Science of the Total Environment, 505, 833-843
Morsali, S. (2018). A novel perspective to bitumen refineries life cycle assessment and processes emissions. Acta
Ecologica Sinica, 38(3), 242-247.
Nanaki, E.A. & Koroneos, C.J. (2012). Comparative LCA of the use of biodiesel , diesel and gasoline for
transportation. Journal of Cleaner Production, 20(1), 14–19. https://doi.org/10.1016/j.jclepro.2011.07.026
Oborn, R. (2012) From Ground to Gate: A lifecycle assessment of petroleum processing activities in the United
Kingdom. activities in the United Kingdom
Popat A. (2015). Zero liquid discharge from concept to commissioning in refineries and downstream
petrochemicals.International Confrenece on Petroleum, Refining and Environmental Technologies, Rotterdam
Rahman, M.M., Canter, C. & Kumar, A. (2015). Well-to-wheel life cycle assessment of transportation fuels derived from
different North American conventional crudes. Applied Energy, 156, 159–173. https://doi.org/10.1016/j.
apenergy.2015.07.004
Raut, R., Narkhede B., Bhaskar B. Gardas, Luong, H. (2018) “An ISM approach for the barrier analysis in implementing
sustainable practices: The Indian oil and gas sector”, Benchmarking: An International Journal, Vol. 25 Issue:
4, pp.1245-1271, https:// doi.org/10.1108/BIJ-05-2016-0073
Schneider, J., Campbell, D., Vargo, C. & Hall, R. (2011). An analysis of reported sustainability-related efforts in the
petroleum refining industry. The Journal of Corporate Citizenship, 44, 69.
Shi, J., Li, T., Peng, S., Liu, Z., Zhang, H. & Jiang, Q. (2015). Comparative Life Cycle Assessment of remanufactured
lique fi ed natural gas and diesel engines in China. Journal of Cleaner Production, 101, 129 136.https://doi.
org/10.1016/j.jclepro.2015.03.080
Srivastava, V.C. (2012). ChemInform Abstract: An Evaluation of Desulfurization Technologies for Sulfur Removal
from Liquid Fuels. ChemInform, 43(18). doi:10.1002/chin.201218271
Stanciulescu, V. & Fleming, J. S. (2006, May). Life cycle assessment of transportation fuels and GHGenius. In EIC
Climate Change Technology, 2006 IEEE (pp. 1-11). IEEE.
“Technology Vision 2020.” Technology Vision 2020, www.energy.gov/sites/prod/files/2013/11/f4/techvision.pdf.
Tiwari, Seema & Tripathi, Indra & Tiwari, Hl. (2013). Effects of Lead on Environment. 2278-9359.
UNEP Report (2012). Towards a life cycle sustainability assessment, making informed choices on product.
Vafi, K. & Brandt, A.R. (2014). Reproducibility of LCA models of crude oil production. Environmental Science and
Technology, 48(21), 12978–12985. https://doi.org/10.1021/es501847p
Vineyard, D.L. & Ingwersen, W.W. (2017). A comparison of major petroleum life cycle models. Clean Technologies
and Environmental Policy, 19(3), 735–747. https://doi.org/10.1007/s10098-016-1260-6
Wallington, T.J., Anderson, J.E., De Kleine, R.D., Kim, H.C., Maas, H., Brandt, A.R. & Keoleian, G.A. (2017). When
Comparing Alternative Fuel-Vehicle Systems, Life Cycle Assessment Studies Should Consider Trends in
Oil Production. Journal of Industrial Ecology, 21(2), 244–248. https://doi.org/10.1111/jiec.12418
Wang, M., Lee, H., & Molburg, J. (2004). Allocation of energy use in petroleum refineries to petroleum products. The
International Journal of Life Cycle Assessment, 9(1), 34-44.
Wawryk, A.S. (1997). INTERNATIONAL ENVIRONMENTAL STANDARDS IN THE OIL INDUSTRY: Improving
the Operations of Transnational Oil Companies in Emerging Economies.
Zhou, H., Qian, Y., Kraslawski, A., Yang, Q. & Yang, S. (2017). Life-cycle assessment of alternative liquid fuels
production in China. Energy (Vol. 139). Elsevier B.V. https://doi.org/10.1016/j.energy.2017.07.157
Zhou, Z., Jiang, H. & Qin, L. (2007). Life cycle sustainability assessment of fuels. Fuel, 86, 256–263.
Ibem V (2010) Environmental Control in Oil & Gas Exploration & Production, Linköping University
Biorefinery introduction (8 October, 2018) Retrieved from https://www.eni.com.
GaBi combines the world’s leading Life Cycle Assessment (15 October, 2018) Retrieved from https://www.gabi-
software.com.
PE International GaBi Software (2014) Retrived from www.gabi-software.com/sweden/overview/what-is-gabisoftware/
Gajanan J. Badwe
Yeshwantrao Chavan College of Engg,
Department of Mechanical Engg Hingna, Nagpur, India
E-mail: gajananjbadwe1@gmail.com
R.R. Shrivastava
G.H.Raisoni College of Engineering, Department of
Engineering Science and Humanities, Nagpur, India
E-mail: Rashmi.shrivastava@raisoni.net
Rakesh L. Shrivastava
Yeshwantrao Chavan College of Engg, Department of
Mechanical Engg Hingna, Nagpur, India
E-mail: Rlshrivastava@gmail.com
Abstract
End-of-Life Vehicles (ELVs) are recycled by informal units in India. These recycling units use the methods that
lead to environmental pollution and low recovery of ELV. In order to improve the environmental and recovery
of ELVs authors propose a roadmap for the development of sustainable end-of-life vehicle management. The
establishment of recycling fund, information system and formalization of dismantling and recycling units will lead
to sustainable ELV recycling management.
Methodology: The study reviews the existing literature on ELV management practices, policies, legislations
in major countries in the world. Based on this authors proposes a roadmap for the sustainable ELV management
system in India.
Findings: The formal and stringent control of regulatory authority over the ELV collectors, recyclers,
manufacturers will lead to development of sustainable ELV management in India. The proposed ELV management
system will cut down the unscientific ELV recycling practices and create employment opportunities.
Contributions: Authors review the literature available on ELV recycling practices across the world. Based on this,
authors propose a roadmap for ELV recycling system suitable for India.
Keywords: ELV Management, Government, Developing Countries, Extended Producer Responsibility
1. Introduction
Automobile is made up of recyclable materials such as steel, aluminium, copper etc. as well as
toxic materials such as coolants and lubricants (Hu and Wen, 2015). Automobile industry, one of
the leading industries in India is growing exponentially (Chaturvedi et al, 2012). Country produced
13, 00,000 passenger vehicles, 4, 00,000 commercial vehicles every year (Automotive Mission
Plan, 2016). With the increase in population of new vehicles, End-of-Life Vehicles (ELVs) are
also growing. According to Go et al (2011) an end-of-life vehicle is a vehicle which is discarded
by its registered owner as a waste. End-of-Life Vehicles contain useful parts/component as well as
hazardous substances. ELV recycling is important mainly due to two reasons. 1) Dismantler can sell
useful parts/components in secondary market and can earn the profits. 2) ELV contains hazardous
substances (lead, mercury, cadmium etc.) which may have negative impact on human health and
environment. In India, unscientific recycling practices lead to environmental pollution and low ELV
recovery. Inappropriate disposal of ELV lead to damages to the environment (Zhao and Chen, 2011).
Regulated dismantling and disposal process of ELV recycling will avoid the burden on environment
and reduce the usage of natural resources (Chen et al, 2010).De-pollution, dismantling, material
recycling are the main steps in End-of-life vehicle recycling.
IAMOT 2019 | 986
A Roadmap for Development of Sustainable End-of-Life Vehicle Management System in India
information for easy and quick dismantling of ELVs. They should provide training to the workers of
dismantling and recycling units.
4. Conclusion
ELVs are recycled by small informal units in India. The recycling methods use by these units
results in environmental pollution and low product recovery. Based on the studies of ELV recycling
practices across the world, the authors proposed a roadmap for ELV recycling system in India. The
propose roadmap will lead to strict monitoring and regulating the ELV recycling business. The
proposed system will improve the rate of collection of end-of-life vehicles. The ELV recycling
business in India needs reforms for the development of environmentally friendly recycling of ELVs.
Country needs more policies/legislation to monitor and control the ELV recycling business. Proper
ELV management will create new employment opportunities in the country.
5. Acknowledgements
G.J. Badwe thanks Mr. S. Shrivastava for his support for the completion of paper.
References
Bandivadekar A.P., Kumar V., Gunter K.L., Sutherland J.W., (2004), A model for material flows and economic
exchanges within the U.S. automotive life cycle chain. Journal of Manufacturing Systems, 23 (1), 22-29
Chaturvedi A., Arora R., Chaturvedi B., Short A., (2012), The story of dying cars in India. Chintan Environmental
Research and Action Group Report
Chen M., (2005), End-of-Life vehicle recycling in China: Now and the future. Journal of Minerals, Metals and Materials
Society, 57(10), 20-26
Chen K., Huang S., (2010), The development and prospects of the end-of-life vehicle recycling system in Taiwan, Waste
Management, 30, 1661-1669
Garg M., Sharma S., Gangacharyulu D., (2013), Processing of end-of-life vehicles (ELVs). International Journal of
Research in Advent Technology, 1(5), 1-14
Gerrard J., Kandlikar M., (2007), is European end-of-life vehicle legislations living up to expectations? Assessing the
impact of the ELV directive on ‘green’ innovation and vehicle recovery. Journal of Cleaner Production, 15,
17-27
Go T.F., Wahab D.A., Ab Rahaman M.N., Azhari C.H., (2001), Disassemblability of end-of-life vehicle: a critical
review of evaluation methods. Journal of Cleaner Production, 19, 1536-1546
Hu S., Wen Z., (2015), Why does the informal sector of end-of-life vehicle treatment thrive? a case study of China and
lessons for developing countries in motorization process. Resources, Conservation and Recycling, 95, 91-99
Kaneri N., Pineau J. L., Shallari S., (2003), End-of-Life vehicle recycling in the European Union, Journal of Minerals,
Metals and Materials Society, 55(8), 14-19
Kumar S., Yamaoka T., (2007), System dynamics study of the Japanese automotive industry closed loop supply chain.
Journal of Manufacturing Technology Management, 18(5), 115-138
Kumar V., Sutherland J.W., (2009), development and assessment of strategies to ensure economic sustainability of the
U.S. automotive recovery infrastructure. Resources, Conservation and Recycling, 53, 470-477
Mohan B.M., (2014), End-of-Life vehicle recycling in India. Production and Operations, 3(4), 1-3
Sakai S., (2014), An international comparative study of end-of-life vehicle (ELV) recycling systems. Journal of Material
Cycles and Waste Management, 16, 1-20
Sakai S., Noma Y., Kida A., (2007), End-of-Life vehicle recycling and automobile shredder residue management in
Japan. Journal of Material Cycles and Waste Management, 9, 151-158
Tai H., He W., (2014), an exploration of deriving fuel from end-of-life vehicle automotive shredder residue. Journal of
the Chinese Institute of Engineers, 37(2), 268-277
Wang L.,Chen M., (2013), Policies and Perspective on end-of-life vehicles in China. Journal of Cleaner Production,
44, 168-176
Zhao Q., Chen M., (2011), A comparison of ELV recycling system in China and Japan and China’s Strategies, Resources,
Conservation and Recycling, 57, 15-21
Abstract
The purpose of this paper is to understand and evaluate the relation between Brazilian and Peruvian normative in
renewable energies with the following variables: i) protection of the environmental, ii) inclusive development and
iii) technological transfer of these technologies. This is contextualized inside the scarcity of hydrocarbons; the
environmental contamination, the greenhouse effect and the global warming that are world problems that require a
sum of solutions. The methodology consists in the collection and revision of the normative in renewable energies
in Brazil and Peru since the 2008-year and the international treaties on environmental matters. Applying the
methodology it`s encounter the bilateral relations between the renewable energy normative with each of three
dependent variables (environmental, inclusive development, technology transfer). The results becoming in elements
for take decisions in macro energy policy, managing technology and at the micro level at the new entrepreneurships.
Keywords: Renewable Energy, Energy Normative, Technology Transfer, Autarky Development, Sustainable Development
1. Introduction
The sector of renewable energies shows a growing interest of the governments to spread and increase
their uses. For that, the governments generate legislation in this intention. However this legislation,
generally elaborated without or few participation of technical people, has a little impact or a minor
influences that the waited.
In 2008 beginning, with emphasis, the normative and legislation about renewable energies in Peru.
Mitma (2013) highlights that, “Peru is a country hydro-thermal in the electricity generation”,
particularly hydroelectric and natural gas. This author adds, “Peru has a great electric generation
capacity with renewable energy not used”.
The object of this research is identifying the impact of the legislation in renewable energies in the
following three dimensions: environmental care, inclusive development and technological transfer.
The legislation in renewable energies that we consider is that regulate the use of the renewable
energies direct and indirectly. Renewable energies, here are considered the hydraulic of low power,
the solar both thermal and photovoltaic, the wind energy, geothermic, principally.
The care of the environment is translate in the economics of de CO2, the substitution of pollutants
sources for renewable energies, among another.
The social development linked to social technologies is linked to the participative development, the
solution of the poor energetic and the universal availability of energy.
The technological transfer is a great possibility and should be embodied with the renewable energies.
It is possible for the small capacity of these artifacts: solar collectors, solar panels, wind generators,
among another.
2. Literature Review
Source: Divulgacao/iStok.com
Cipriano (2016) called power storage, the technology that can “store” electricity generated by the
photovoltaic panels and air generators.
This new profile of matrix will require technological solutions to assure the safety in supplying
energy. As the sources of renewable depend of climate and regional conditions to produce electricity,
become not flashing is the challenge to face. One pledge to broaden the potential is the energy
storage technology, or power storage. The system allows to “keeping” the generated electricity by
the photovoltaic panels and air generators, to be utilized in the strategic way and under control,
especially in moments without sunshine of winds.
The storage technology utilizes apparatus as batteries and super-capacitors to transform the generated
electric energy by winds and by solar radiation in chemical energy. When it is accumulated, the
chemical reactions occur in the opposite direction, liberating the energy that was there before.
This liberation can do in the controlled form in desired moment.
One of the players of the development of this technology in Brazil is the LACTEC Institute,
considered one of largest center of science and technology of the country. Research has done to
develop and manufacture batteries of energy storage with local technology. Their horizontal
evaluation, the renewable sources can duplicate the generation of energy with the product, utilizing
all potential of farms of the wind and the photovoltaic panels.
The renewable electric energy generation occurs only when the source is available, depending the
season and region, regardless the generation capacity installed. In the case of generation by the solar
or wind systems, adequately dimensioned, with the energy storage, the availability of the energy
would rise to 100% of the time.
Wind farm with the capacity of 100 megawatts (MW), offers about 10 MW to 20 MW to the supply
grid, because generate electricity only when there is the wind conditions. Explain that, without the
technology of energy storage, the increase the generation in the farms will be possible with the setup
of more new air generators and blades that will have infrastructure and environmental costs.
If there were the possibility to store energy any time when the wind rotates the blades and dispatch
them at an opportune moment, would be possible to use more this farm without increasing its space.
It will expand the quantity of generation at low cost.
3. Methodology
The methodology consists in the following steps:
i. A collection and classification of the major Brazilian and Peruvian legislation about
renewable energies.
ii. After that, the impact of each normative is deployed in the three dependent variables
(environmental protection, inclusive development and technological transfer)
looking for the evaluation of the impacts.
iii. This is contrasted with the current energy policy and global trends.
iv. Finally, it is proposed some alternatives to improve this sector.
5. Results
6. Conclusion
The normative in renewable energies is in crescendo not only in Brazil and in Peru at the global level.
In the analysis of the Peruvian legislation was found that the normative is influenced by environmental
care global trends and the social impacts are very few considerers, so the autarky concepts
(Müller et al., 2011) are not mentioned.
The technological transfer is not considered nor mentioned in the norms, losing the opportunity to
encourage the technological transfer through the normative.
Consequently, it is necessary that the norms in renewable energies have a regional focus, particularly
in the social development and the technological transfer would be included in the normative.
References
Andrade, J. (2018) Division of Electric Systems–LACTEC, Curitiba, Parana, Brazil.
Batista, P.N. Jr. (2017) ABIPTI Últimas Notícias– otícias Report on September 5, 2017.
ESCRITO POR AGÊNCIA GESTÃO CT&I
Bradbrook, A. (1996), The development of a legislative framework for renewable energy and energy conservation.
Renewable Energy, Volume 8, Issues 1–4, May–August 1996, Pages 107-116
Cipriano, L. (2016) ABIPTI da Agência Gestão CT&I) Report on July 24, 2016.
(Agência Gestão CT & I, com informações do MME)
D.L. Nº 1002. Decreto Legislativo de promoción de la inversión para la generación de electricidad con el uso de energías
renovables. Lima, 2010
Mitma, R. (2015), Análisis de la Regulación de Energías Renovables en el Perú, Revista Derecho & Sociedad Nº 45,
pp. 167-176
Mitma, R. (2013), Regulación de las Energías Renovables en el Perú. Foro Regional Eficiencia Energética: Propuestas
para la región Tacna, Presentation avaible at: http://www.osinergmin.gob.pe/newweb/uploads/Publico/
OficinaComunicaciones/EventosRealizados/ForoTacna/2/6-Regulacion%20RER%20Peru-Riquel%20
Mitma.pdf
Müller, M.; Stämpfli, A.; Dold, U.; Hammer, T. (2001), Energy autarky: A conceptual framework for sustainable
regional development. Energy Policy, 39, pp. 5800-5810
Pereira, M. (2015). Las energías renovables ¿Es posible hablar de un derecho energético ambiental? Elementos para una
discusión. Jurídicas CUC, 11(1), 221-242. doi: http://dx.doi.org/10.17981/juridcuc.11.1.2015.10
1. Introduction
The intention of traditional innovation is to promote economic growth (Foster & Heeks, 2013), and
in return, to contribute to the generation of social welfare (George, McGahan, & Prabhu, 2012).
However, the observable results of this model have been heterogeneous between developed countries
and developing countries (Sampedro & Díaz, 2016), in such a way that its benefits have not been
equitably distributed in society (Moulaert, MacCallum, Mehmood, & Hamdouch, 2013; Sutz, 2010).
For this reason, it is possible to find examples supporting the positive effects of innovation; such as
the case of Finland, which has an investment in Research and Development of 2.9% of GDP (IBRD,
2018) and low levels of inequality, represented by a Gini index of 0,2711in 2015 (Banco Mundial,
2018); it is also possible to find that, for other development regimes defined by growth patterns and
innovation profiles, different welfare conditions are obtained (Dutrénit, Moreno, & Puchet, 2013).
The conditions of inequality lead to high proportions of a population being “an excluded group
from economic production, social relationships, and political activity” (Gras, Dutrénit, & Vera-Cruz,
2017, pág. 58).
This allows identifying two main groups of people, those that are part of a society and those that
are in a state of exclusion. This last group of people is those who are in conditions of inequality,
1 The value of 0 expresses the total equality, the value of 1 expresses the maximum inequality (Gini, 1912)
poverty, deprivation of a dignified life, among other conditions. This type of problem represents a
great challenge for sustainable development (Naciones Unidas, 2015), but it certainly redirects the
gaze towards the most disadvantaged people.
An alternative, which has taken relevance, to solve these problems is the innovation. Since it can be
seen as a tool to contribute to the reduction of inequality and poverty and at the same time, it can
be an inclusion factor (Sutz, 2010; Mashelkar, 2017). In other words, to develop and disseminate
innovations aimed at creating adequate conditions that contribute to economic growth, but at the
same time, these innovations increase the levels of well-being and quality of life of the excluded
groups, which would lead achieving an inclusive development (Hernández, 2013).
The model of inclusive innovation emerges with this purpose (George, McGahan, & Prabhu, 2012).
This model corresponds to the development and diffusion of low cost and high quality innovations
that allow to improve the social and economic well-being of those who are in conditions of inequality,
poverty and exclusion (George et al, 2012; Foster & Heeks, 2013), hoping that they are not only
consumers but also participants in some stage of the innovation process (Foster & Heeks, 2013).
This implies linking the excluded group to innovation systems. This group has to interact with other
actor and generate new dynamics; thus, increasing the complexity of these systems so they become
inclusive systems of innovation, provided that the adaptations required by the new features will be
made (Van Der Merwe & Grobbelaar, 2016). Namely, it is necessary to promote a structural change
in innovation systems, where the excluded groups cease to be seen as patients of the process and are
seen as agents (Alzugaray, Mederos, & Sutz, 2013), through a greater level of participation, rather
than only beneficiaries of the results. In order to achieve this structural change, it is necessary to
understand which the role of the excluded group in the system would be.
From the premise that innovation systems are complex adaptive systems (Ruiz, Quintero, & Robledo,
2016) it is possible to make use of simulation tools to contribute to a systemic understanding of the
role of the excluded group, based on their characteristics and the relationships it establishes with
other actors of the system.
For this reason, the purpose of the current work is to describe the role of the excluded groups that
belong to innovation systems, based on their respective decision rules which determinate that they
become autonomous agents. The first two stages of Aged-Based Modeling methodology (Overview
and Design Concepts) allow to describe an agent according to its behaviors, in fact conceptual,
theoretical and empirical bases available in the literature are used to support this work.
between actors are inherently originated in the purpose of inclusion in innovation systems. That is,
to talk about inclusive innovation systems it is necessary to link the system to those who are socially
excluded; according to Sen (2000), this group of people corresponds to those who do not have
interrelation with society due to different conditions of deprivation.
In consequence, if an innovation system is considered an Adaptable Complex System (Ruiz,
Quintero, & Robledo, 2016; Niosi, 2004; Niosi, 2011), a system of inclusive innovation, which
contains a greater number of elements and variables, can be more reasonably considered as an
Adaptable Complex System. According to Castañeda (2009), this type of system is characterized by
the multiplicity of agents, with differentiable capabilities and attributes that establish bidirectional
relationships between them and with the environment. These relationships lead to changes in the
capabilities and attributes of the actors, generating learning processes that allow them to adapt
and survive in the system. That is, they evolve presenting emerging properties. In addition, it is
contemplated that the decisions and actions of the actors of complex systems are based on the
assumption of limited rationality (Niosi, 2004).
However, we do not perceive a robust analytical framework that encompasses the level of complexity
described, this may be the reason why it is not possible yet to adequately explain how an innovation
system manages to generate inclusive innovations (Zhang & Wu, 2016), which gives room to the
need for contributing to the construction of an analysis framework that makes possible to reach
beyond the interpretation of the context, and to understand the behavior of the agents responsible
for the generation of inclusive innovations, not only in a static or historical analysis, but also in
an evolutionary analysis (Uriona & Grobbelaar, 2016); that is to say, to have an approach from a
systemic perspective that generates the necessary inputs to study the possible critical factors that
determine the dynamics of inclusive innovation systems, taking into account their multiple variables
and the relationships established among them.
3. METHODOLOGY
3.1. Process
The methodology used in this work corresponds to the description of agents as it is established in the
Aged-Based Modeling methodology, in such a way that the excluded groups can be represented as
autonomous entities that interact with other agents and with the environment in which they operate.
For this, two stages were developed: 1) Identification of characteristics of the excluded groups from
a literature review, 2) Application of the first two stage of “ODD protocol” (Overview, Design
Concepts and Details protocol) for the expression of the simulation model (Grimm, y otros, 2006;
Grimm, y otros, 2010), limited to the first two stages proposed because these are enough to describe
an agent.
i. The systematic literature review was carried out in the Scopus database in the first
semester of 2018. The used keywords correspond to “inclusive innovation”, which
allowed to identify not only the specific characteristics of the excluded groups but
also the types of relationship that can be established with other agents of the system.
Results are shown in the 4 numeral.
ii. The ODD protocol is a tool used to express the Agent-Based Models. This protocol
consists of three blocks: 1) Overview, 2) Design Concepts and 3) Details. Figure 1
shows its components. For the scope of this work, only 7 elements are applied. All
elements of the first block and four elements of the second block (marked with gray
color in Figure 1).
The most important part in the ODD protocol is the second block because to design a model, it is
necessary to know and describe all agents of the system, from a micro perspective. The elements
applied to the excluded groups as agents were: capabilities, attributes, and decision rules. That
information can be found in the: emergency and adaptation elements.
Figure 1: Blocks and Elements of ODD Protocol. Adapted from Grimm et al (2010)
Based on the above, the literature offers some sundry of works on innovation, in which different
simulation techniques are used. However, as the purpose of this work is to characterize the group of
excluded people as agents of an innovation system, a search was made in the Scopus database (2018),
using the keywords: simulation, innovation, and agent. From this search, it was possible to identify
232 works that contribute to the comprehension of the phenomenon of innovation, where more than
80% of said works are done through Agent-based Simulation and the remaining percentage uses
techniques such as Systems Dynamics, hybrids or techniques (see Table 1).
Table 1: Simulation Techniques for the Study of Innovation
Statistics 3,9%
Others 3,0%
Agent-based Simulation, in addition to the general advantages of simulation, can also offer additional
information of a system that other simulation techniques do not offer, such as System Dynamics,
because the former is capable of explicitly capturing the inherent probability of the system (Macal,
2010). It also allows the autonomy, reasoning, communication, and coordination of the agents
(Dongsheng & Yongan, 2018) and from this interaction at the micro level, the macro or aggregate
level can emerge (Garcia & Jager, 2011).
Another aspect to highlight of the Agent-based Simulation for the study of the phenomenon of
innovation is that it allows to represent different existing theories about innovation, such as the
diffusion of Roger (Garcia & Jager, 2011), innovation capabilities theory (Hülsmann, Tilebein,
Cordes, & Stolarski, 2011), networks theory (Gilbert et al, 2001; Ruan & Ruan, 2012; Mahmoudzadeh
& Alborzi, 2017), innovation systems (Ruiz, Quintero, & Robledo, 2016), among others.
The literature about inclusive innovation through Agent-based Simulation is still very incipient. A
work that approaches this is the one carried out by Gras, Dutrénit, & Vera-Cruz (2017), who propose
the modeling of inclusive innovation, but from the analysis of specific projects and not from the
perspective of innovation systems.
Therefore, the type of innovation to be generated in innovation systems is based on the definition
proposed by George, McGahan, & Prabhu (2012): low-cost, high-quality innovations that improve
the social and economic well-being of those who are in inequality, poverty and exclusion conditions,
hoping that they are not only consumers but also participants in some stage of the innovation process
(Foster & Heeks, 2013).
Consequently, the most relevant actor in an inclusive innovation system corresponds to people who
are in social exclusion. Following Sen (2000), social exclusion can be seen as deprivation of abilities
to develop a good life and share the opportunities others enjoy.
Based on this, papers on inclusive innovation offers a range of approaches to the people who will
benefit from innovation, among whom are those described in Table 2. Due to this wide range of
options, an identity problem is identified: which groups are historically considered marginalized,
isolated or excluded? How do they need to be included by new approaches to innovation? Although
the broad scope of inclusive innovation also includes women, young people, disabled people, ethnic
minorities, and informal sector entrepreneurs (OCDE, 2013), poor people have been the main focus.
These are people with lower incomes (less than U$ 2.50 a day). In addition, there is extreme poverty,
people who live with less than U$ 1.9. This leads to the greatest interest focused on this population.
As a result, the excluded groups correspond to those people disconnected from economic production,
social relations, and political activity.
Table 2: Beneficiaries of Inclusive Innovations
In addition, creation and diffusion of inclusive innovation have transaction costs due to market
failures. Among the factors of greatest impact are: 1) high Intellectual Property Costs when
innovations are not competitive or public goods, 2) consumers can be very poor to access some
innovations, 3) the presence of significant sunk costs, 4) spatial dispersion, and 5) the asymmetry of
information available on innovations (Rui, 2013).
9.1. Overview
9.1.1. Purpose
The purpose of the model is to represent the dynamics of inclusion in innovation systems and answer
the question “what is the role of the excluded groups in the innovation system to be part of it?”,
starting of a set off certain characteristics and capabilities.
Variable Description
Capability to identify their own Ability to detect the privations and needs themselves, with or without help from
needs other actors
Knowledge of their conditions Ability to locate in the middle of a specific context
Ability to interact with other actors and establish dialogues where they can express
Voice Capability
their needs and knowledge
Innovations Knowledge Ability to relate possible solutions to their needs
The threshold where the actor generates or not a link with other actors to give
Cost of transaction willing to pay
solutions to its problems
The threshold where the actor decides or not to enter into dialogues that allow the
Waiting capacity
generation of interests and ties that can provide solutions to its problems
iii. Scales: The scales are defined according to the type of need that the excluded
groups have (1 - 3 pending, 4 - 6 latent, 7 - 9 invisible). The capabilities conserve
the same scale, where 0 means that the capability does not exist, from 1 to 3 it has
a low capability, between 4 and 6 it has a medium capability, and finally, from 7 to
9 the capabilities are high.
9.1.6. Emergency
Dynamic of Inclusive Innovation System emerges from the interaction between heterogeneous
agents that occurs in the context of an environment of scarcity and needs of the excluded group. This
emergency will be the result of the execution of the established decision rules by the different actors.
The decision rules of the excluded groups are described in Table 4.
Table 4: Excluded Groups Decision Rules
Rule Description
Accept the existence of an
A receptor that allows actors to identify their pending, latent and invisible needs
unmet need
Represent or accept being
The effect that allows the actor to take part and behave as an aggregate
represented as a group
A receptor who values the favorable conditions of trust that activate the effect that
Establish bonds of trust
promotes the bond
REFERENCES
Alzugaray, S., Mederos, L., & Sutz, J. (2011). Building Bridges: Social inclusion problems as research and innovation
issues. Globelics Conference, Buenos Aires.
Alzugaray, S., Mederos, L., & Sutz, J. (2013). Investigación e innovación para la inclusión social: la trama de la teoría y de
la política. ISEGORÍA. Revista de Filosofía Moral y Política(48), 25-49. doi:10.3989/isegoria.2013.048.02
Banco Mundial. (2018). Índice de Gini - Filandia. Recuperado el 25 de 08 de 2018, de https://datos.bancomundial.org/
indicador/SI.POV.GINI?locations=FI
Bianchi, C., Bianco, M., Ardanche, M., & Schenck, M. (2015). Inclusive Innovation and Policy Mismatch in Health
Care. En D. a. Innovation Systems, Cassiolato y Soares (págs. 297- 220). Rio de Janeiro: E Papers.
Bryden, J., Gezelius, S., Refsgaard, K., & Sutz, J. (2017). Inclusive innovation in the bioeconomy: Concepts and
directions for research. Innovation and Development, 7(1), 1-16.
Carrasco, P. (2017). Towards inclusivity through a theoretical and empirical approach. inclusive innovation framework
and an adivasis’ case of study. Valencia: Tesis doctoral Universitat Politècnica De València.
Castañeda, G. (2009). Sociomática: El estudio de los Sistemas Adaptables Complejos en el entorno Socioeconómico. El
trimestre Económico, LXXVI (1)(301), 5-64.
Chataway, J., Hanlin, R., & Kaplinsky, R. (2014). Inclusive Innovation: An architecture for Policy Development.
Innovation and Development, 4(1), 35-54.
Davis, J., Eisenhardt, K., & Bingham, C. (2007). DEVELOPING THEORY THROUGH SIMULATION. Academy of
Management Review, 32(2), 480–499.
Dongsheng, Y., & Yongan, Z. (2018). Innovation Based on Multi-Agent Method. International Conference on Computer
Science and Software Engineering, (págs. 528-531).
Dutrénit, G., & Miguel, N. y. (2017). Procesos de diálogo para la formulación de políticas de CTI en América Latina y
España. Ciudad Autónoma de Buenos Aires : CLACSO: Madrid : CYTED; México : LALICS.
Dutrénit, G., & Sutz, J. (2013). Introducción. En G. Dutrénit, & J. Sutz, SISTEMAS de INNOVACIÓN para un
Desarrollo Inclusivo. La experiencia latinoamericana. México DF.: Edward Elgar Publishing AG 2014.
Dutrénit, G., Moreno, J., & Puchet, M. (2013). Crecimiento económico, innovación y desigualdad en América Latina:
Avances, retrocesos y pendientes Post-Consenso de Washington. México: Publicación de las Naciones Unidas.
Foster, C., & Heeks, R. (2013). Conceptualising inclusive innovation: modifying systems of innovation frameworks
to understand diffusion of new technology to lowincome consumers. European Journal of Development
Research, 25(3), 333-355.
Freeman, C. (1982). Technological infrastructure and international competitiveness. Draft paper submitted to the OECD
Ad Hoc Group on Science, Technology and Competitiveness.
Freeman, C. (1987). Technology Policy and Economic Performance: Lessons from Japan. London: Pinter.
Garcia, R., & Jager, W. (2011). From the Special Issue Editors: Agent-Based Modeling of Innovation Diffusion. Product
Development & Management Association, 28, 148-151.
George, G., McGahan, A., & Prabhu, J. (2012). Innovation for Inclusive growth: towards a theoretical framework and
research agenda. Journal of Management Studies, 49(4), 661-683.
Gilbert, N., Pyka, A., & Ahrweiler, P. (2001). Innovation networks - A simulation approach. JASSS, 4(3), 14p.
Gras, N., Dutrénit, G., & Vera-Cruz, M. (2017). Innovaciones inclusivas: un modelo basado en agentes. En J. C. Gómez,
El proceso de modelado en economía y ciencias de la gestión (págs. 57-100). México: Maporrúa.
Grimm, V., Berger, U., Bastiansen, F., Eliassen, S., Ginotd, V., Giske, J., . . . Müller, B. P. (2006). A standard protocol
for describing individual-based and agent-based models. Ecological modelling, 198, 115–126.
Grimm, V., Berger, U., D eAngelis, D. L., Polhill, J. G., Giskee, J., & Railsbackf, S. F. (2010). The ODD protocol: A
review and first update. Ecological Modelling, 221, 2760–2768.
Heiskanen, E., Hyysalo, S., Tanja, K., & Repo, P. (2010). Constructing innovative users and user-inclusive innovation
communities. Technology Analysis and Strategic Management, 22(4), 495-511.
Hernández, J. L. (2013). Innovación Inclusiva con Instituciones Inclusivas. LALICS International confercese 2013
“Sistemas Nacionales de Innovación Y Políticas de CTI Para Un Desarrollo Inclusivo Y Sustentable.
doi:http://s1.redesist.ie.ufrj.br/lalics/papers/138__Innovacion_inclusiva_con_instituciones_inclusivas.pdf
Hülsmann, M., Tilebein, M., Cordes, P., & Stolarski, V. (2011). Cognitive diversity of top management teams as a
competence-based driver of innovation capability: How to decode its contribution comprehensively. En
M. P. Hülsmann, Strategies and Communications for Innovations: An Integrative Management View for
Companies and Networks (págs. 37-50).
Lundvall, B. (1985). Product Innovation and User-Producer Interaction. Aalborg: Aalborg University Press.
Lundvall, B., Vang, J., Joseph, K. J., & Chaminade, C. (2009). Innovation system research and developing countries.
En K. J.-Å. B.-Å. Lundvall, Handbook of Innovation Systems and Developing Countries (págs. 1-32).
Cheltenham - Northampton: Edward Elgar Publishing.
Macal, C. M. (2010). To Agent-Based Simulation from System Dynamics. Proceedings of the 2010 Winter Simulation
Conference. B. Johansson, S. Jain, J. Montoya-Torres, J. Hugan, and E. Yücesan, eds., (págs. 371 - 382).
Mahmoudzadeh, M., & Alborzi, M. (2017). Modeling Iranian innovation network in nanotech for policy: applying an
adopted version of SKIN model. Journal of Science and Technology Policy Management, 8(2), 129-145.
Mashelkar, R. (2017). Impact of science, technology and innovation on the economic and political power. AI &
SOCIETY(32), 243–251. doi:10.1007/s00146-015-0639-y
Mostafavi, A., Abraham, D. M., DeLaurentis, D., & Sinfield, J. (2011). Exploring the Dimensions of Systems of
Innovation Analysis: A System of Systems Framework. IEEE Systems Journal, 5(2), 256 - 265.
Moulaert, F., MacCallum, D., Mehmood, A., & Hamdouch, S. (2013). The International Handbook on Social Innovation.
En Collective Action, Social Learning and Transdisciplinary Research. EEUU: Edward Elgar.
Naciones Unidas. (25 de Octubre de 2015). Resolución aprobada por la Asamblea General el 25 de septiembre de 2015.
Asamblea General. Obtenido de http://www.un.org/es/comun/docs/?symbol=A/RES/70/1
Niosi, J. (2004). National systems of innovation are evolving complex systems. . Paper presented at the 13th International
Conference on Management of Technology - IAMOT. Washington, DC.
Niosi, J. (2011). Complexity and path dependence in biotechnology innovation systems. Industrial and Corporate
Change, 20(6), 1795-1826. doi:10.1093/icc/dtr065
OCDE. (2013). Innovation and Inclusive Development. Conference Discussion Report. Cape Town, South Africa.
Parjanen, S., Melkas, H., & Outila, T. (2011). Distances, Knowledge Brokerage and Absorptive Capacity in Enhancing
Regional Innovativeness: A Qualitative Case Study of Lahti Region, Finland. European Planning Studies,
19(6), 921-948.
PNUD. (2008). Creating Value for All: Strategies for Doing Business with the Poor. Nueva York: PNUD.
Ramani, S., SadreGhazi, S., & Duysters, G. (2010). On the Delivery of Pro-Poor Innovations: Managerial Lessons from
Sanitation Activists in India. Working paper series, 2010-018, UNUMerit.
Randall, G., & Sutz, J. (2009). Investigación y reforma: Investigación para la inclusión social. Hacia la Reforma
Universitaria(5), 35-48.
Rothwell, R. (1994). Towards the Fifth-generation Innovation Process. International Marketing Review, 11(1), 7-31.
Ruan, G., & Ruan, P. (2012). Multi-agent modeling and simulation on knowledge sharing within innovation network
members. ICIC Express Letters, Part B: Applications, 3(1), 177-182.
Rui, J. (2013). Institution level, policy option and inclusive innovation in China. 6th International Conference on
Information Management, Innovation Management and Industrial Engineering, (págs. 148-153).
Ruiz, W., Quintero, S., & Robledo, J. (2016). Impacto de los Intermediarios en los Sistemas de Innovación. J. Technol.
Manag. Innov, 11(2), 130-138.
Sampedro, J., & Díaz, P. (2016). Innovación para el desarrollo inclusivo: Una propuesta para su análisis. Economía
Informa (396), 34- 48.
Schroeder, D., Dalton-Brown, S., Schrempf, B., & Kaplan, B. (2016). Responsible, Inclusive Innovation and the Nano-
Divide. Nanoethics(10), 177–188. doi:10.1007/s11569-016-0265-2
Social exclusion: Concept, application and scrutiny. (2000). Manila: Asian Development Bank.
Sutz, J. (2010). Ciencia, Tecnología, Innovación e Inclusión Social: una agenda urgente para universidades y políticas.
Psicología, Conocimiento y Sociedad, 1, 3 - 49.
Uribe, J., Quintero, S., & Giraldo, D. (2016). Modelo de simulación y análisis de redes en los sistemas regionales de
innovación. Cuaderno Activa, 8, 131-141.
Uriona, M., & Grobbelaar, S. (2016). System Dynamics Models in the Innovation Systems domain: A review.
International Schumpeter Society Conference. Montreal.
Van Der Merwe, E., & Grobbelaar, S. (2016). Evaluating Inclusive Innovative Performance: The case of the e-Health
System of Western Cape Region, South Africa. PICMET’16: Technology Management for Social Innovation.
Zhang, Z., & Wu, X. (2016). The inclusiveness of internet-based agri-business innovation system: A case study on
Alibaba. PICMET 2016 - Portland International Conference on Management of Engineering and Technology:
Technology Management For Social Innovation, Proceedings, (págs. 1098 -1105).
Manon Enjolras
Université de Lorraine, ERPI, France
E-mail: manon.enjolras@univ-lorraine.fr
Alice De Casanove
Université de Lorraine, ERPI, France
E-mail: alice.decasanove@gmail.com
Laure Morel
Université de Lorraine, ERPI, France
E-mail: laure.morel@univ-lorraine.fr
Johan Claire
Innovation Way SA, France
E-mail: johan.claire@innovation-way.com
Abstract
Innovation is the key driver for organizations to create value from new products, services, processes or business
models. It is therefore not surprising to see that an international consensus is appearing concerning best practices
that are favouring innovation. In particular, the future ISO standard 50-501 called “Innovation Management
System” underlies the theoretical foundation of these, with a special focus put on the necessity of having an
“Innovation Management assessment Framework” behind all assessment approaches. Having a suitable Innovation
Framework also makes sure that the approach provides a relevant set of assessment questions that correspond to
that framework. Following the ISO recommendations, we propose to show that if there are good practices that
promote innovation, these are implemented differently according to the sectors of activity (e.g. the concept of short-,
medium-, and long-term projects is different for the nuclear industry and the agri-food industry, etc.) .
As a result, to improve a firm’s capacity to innovate, best innovation practices must be taken into account and
adapted to the specificity of the industrial sector in which the firm being evaluated operates. In this article, we will
first present the innovation assessment framework recommended by the standard. Then, we will show an original
assessment tool that is fully aligned with the future standard. The latter allows a contextualized evaluation, online
and in three languages, of an organization’s capacity to innovate or its lack thereof. Based on a benchmark of best
practices associated with a multi-criteria evaluation, it allows a flash diagnosis after filling out a 30–45 minute
form, containing the identification of brakes and engines, benchmarking with similar companies and operational and
customized recommendations. Based on 330 experiments, we will show the relevance of the tool and how it proves
to be a real help for innovation activities support.
Keywords: Innovation, Best Practices, Assessment, Framework, Business Sectors
1. Introduction
Innovation is recognized as one of the main factors driving economic growth. Companies’ capacity to
manage their innovation system is therefore a critical success factor and relies on a set of interrelated
elements.
The large amount of research related to the concept of innovation results in an abundance of
definitions. Schumpeter is one of the first authors who proposed a definition [1]; he suggests five
types of innovation. Another well-known definition is proposed by the Organisation for Economic
Co-operation and Development (OECD), which considers four types [2]. Thus we can find differences
in the definition of innovation according to the authors. The lack of consensus on the definition of
innovation makes it difficult to propose a way to evaluate the firms’ capacity to innovate [3].
This question gave rise to the ISO 56002 standard – Innovation Management System, which will
be published in 2019. This standard put forward the necessity to have an “Innovation Management
Assessment Framework” behind all assessment approaches and proposes recommendations on
innovation management through the identification of best practices to be deployed within companies.
This standard provides a common framework and language to develop and deploy innovation
capabilities, evaluate performance, and achieve intended outcomes. It positions itself as a standard
referential that can be deployed in all business sectors and all type of companies. However, we can
wonder about:
●● The relative importance that each practice may have in the particular context of a given
business sector (for example: Is creativity as important in the steel industry as in the
agri-food sector?)
●● The importance of the maturity of a company’s innovation management system in
different business sectors (is it necessary to be as well organized/as mature to innovate
in all sectors?)
This research work aims to define innovation management profiles of companies according to their
business sector. The objective is to identify the similarities and the specificities of each group of
companies, in order to propose operational recommendations to support them. Based on an analysis
of 330 cases, and relying on a diagnostic tool in line with ISO 56002, the Potential Innovation Index,
we put forward that different profiles can be defined. Specificities can be highlighted from one
business sector to another. However, the companies from the same business sector remain different,
with a certain variability concerning the way they manage innovation.
competitiveness in the marketplace. This model provides the basis for a detailed audit of current
innovation practice and performance. The audit has two dimensions: the process audit assesses
whether the processes necessary for innovation are in place and the degree to which best practice is
used; and the performance audit focuses on the outcomes of each core and enabling process and of
the overall process of technological innovation and its effect on competitiveness. The performance
audit helps identify needs and problems, but it doesn’t explain why gaps exist between current and
required performance and it doesn’t provide an action plan for closing these gaps. The process audit
meets these needs. The audit methodology uses a two-level approach: a rapid assessment based on
innovation scorecards and an in-depth audit. These scorecards provide an overview of the company’s
strengths and weaknesses with regard to technical innovation management, highlighting those areas
that require in-depth examination. The in-depth audit identifies not only the processes, but the areas
within each requiring attention.”,”DOI”:”10.1016/0737-6782(95 proposes a method to assess a
maturity degree applied to seven internal practices. Similarly, Guan et al. [6] suggest six practices
in order to evaluate innovative companies in China. Finally, Boly et al. [7] propose the Potential
Innovation Index based on 15 internal practices that have been widely applied among French SMEs.
Innovation capability has therefore been defined as a global attitude of the company to react to
the demands of its environment (internal or external) and as its capacity to implement innovation
management best practices (ISO/DIS 50501).
ISO 56002 – Innovation Management System will be published in 2019 (Figure 1). This
recommendation standard brings together a set of good practices and was drafted by ISO TC 279,
an international technical committee composed of about 100 experts (professionals, consultants and
academics) from 53 countries. Now published at the DIS stage (Draft International Standard) under
ISO/DIS 50501, it has been disseminated for voting and comments as part of a public inquiry.
The guidance within this document is generic and intended to be applicable to all types of
organizations, regardless of type, sector, maturity or size.
It highlights different dimensions representing the innovation management system (Figure 1).
The upper part (Clauses 5 and 6) represents the strategic dimension of innovation: vision, policy,
strategy and objectives. This section highlights the importance of organizing responsibilities, a
forward-looking vision and a commitment from top management. In addition, the concepts of risks
and opportunities management are highlighted, as well as the importance of defining a strategy and
its dissemination.
The Operation part (Clause 8) presents the innovation processes that have to be put in place within
companies: Identify opportunities, create concepts, validate concepts, develop working solutions
and deploy to realize value.
The support part (Clause 7) represents in a large sense the resources that support the innovation
processes: tools, methodologies, competencies and communication. These resources have to
be managed on a long-term basis in order to establish, implement and improve the innovation
management system.
Finally, the bottom part (Clauses 9 and 10) put forward the importance of regularly assessing this
innovation system in a continuous improvement approach.
These practices can be linked to the different dimensions proposed by the ISO standard (Figure 1).
●● Practice 1 – strategy – is directly related to Clauses 5 and 6, particularly through the
“strategic vision” and “networking” activities. It is also in line with Clause 7 for aspects
related to intellectual property and financial agility.
1
Innovation Way: http://innovation-way.com
is diversified both by the business sectors concerned and by the size of the companies. These are
mainly French companies, but not exclusively. It is interesting to note that these companies are
also diversified according to the PII category to which they belong: passive, reactive, preactive
and proactive (Table 1). A large majority of the panel are considered reactive and preactive. This
indicates a particularity of the companies studied: they are overwhelmingly aware and involved in
a process of innovation management. This also shows a certain maturity in their internal processes.
Table 1: Description of the Panel of Companies
Nb of Companies PII Category
Business Sectors Passive Reactive Preactive Proactive Total
Commercial 5 10 11 1 27
B2B Trade 1 4 4 9
B2C Trade and Distribution 4 5 7 1 17
Hotels and restaurants 1 1
Industry 14 70 71 19 174
Aeronautics 2 4 8 1 15
Agri-food industry 1 7 4 2 14
Automotive 2 3 1 6
Chemistry - Rubber - Plastic 1 7 5 13
Construction 1 10 1 12
Electrical and electronic equipment 1 7 10 2 20
Energy 11 7 2 20
Furniture-textile-manufacturing industries 3 4 1 8
Mechanics - Metallurgy 3 11 14 2 30
Other industrial sectors 3 2 6 1 12
Pharmacy - Biotechnologies 4 4
Public Works 3 1 4
Railways 1 1
Telecommunications 1 1 1 3
Transport and Logistics 3 2 3 1 9
Wood - Paper - Printing 1 2 3
Services 17 54 47 11 129
Banking and Insurance 1 3 2 1 7
Communication - Media 1 1
Consulting 4 17 11 1 33
Engineering - R&D 3 9 6 18
IT activities 3 9 11 23
Other business services 2 11 6 2 21
Other service activities 6 9 7 1 23
Personal Services 1 1 1 3
Total 36 134 129 31 330
Our data analysis consisted in representing the profile of companies from the same activity field
(industry or service) and according to the six innovation practices of the PII previously presented
(Figure 2): Strategy, Idea Generation, Design, Project Management, Human Resources and
Knowledge Management.
An average of the evaluations of companies in the same group was carried out by practice, in order
to obtain an overall profile reflecting their maturity in terms of innovation management.
Different groups have been considered. First of all, a distinction was made between industrial
and service companies. Then, the business sectors that are well represented within the panel were
identified and defined as the groups to be tested. We have selected four business sectors for industrial
companies and three business sectors for service companies:
●● Electrical and electronic equipment
●● Energy
●● Mechanics – Metallurgy
●● Agri-food industry
●● Consulting
●● IT activities
●● Engineering - R&D
Then, Minitab2 software was used in order to draw the average profile of each group of companies,
taking into account the variability inside the group. Based on several box plots, it was possible to
compare and to analyse the particular profiles of these groups, taking into account the deviations
from the average in order to potentially identify extreme values. The choice to use a box plot is
justified by the fact that these graphics make it possible to display variation in samples of a statistical
population, By drawing a rectangle from the first to the third quartile and cut by the median [16].
This represents the main advantage of using box plots in this analysis. In addition to the rectangle
obtained representing the box plot, segments can be added leading to the extreme values.
5. Results
In general, the average profiles for the six innovation practices do not differ much between
Industries and Services (Figure 5). The main differences are related to the “design” practice. Service
companies are clearly less well evaluated on this theme. Concerning the “project management”
practice, industrial companies are less well evaluated. This highlights particularities in the innovation
management of these two groups.
1
y s y s y s y s y s y s
str r vi
ce str r vi
ce str rvi
ce str rvi
ce str rvi
ce str rvi
ce
du Se du Se du Se du Se du Se du Se
In In In In In In
eg
y
io
n n nt es nt
at rat sig me rc me
Str ne De age es
ou
age
e an R an
sG n
ea ct
M ma ge
M
Id oje Hu ed
Pr l
ow
Kn
2
http://www.minitab.com
Service companies are less mature in terms of design, which seems consistent given their intrinsic
functioning. This practice seems less critical in the context of service companies than in that of
industrial companies. On the other hand, project management practice appears to be a strong point.
Industrial companies, on the other hand, seem to have lower maturity in terms of project management,
although the average rating is rather good (above 3).
On the other hand, there is relatively high variability both in the case of industrial companies and
in the case of service companies (the box plots are extended). The first two innovation practices
(strategy and idea generation) show the lowest values of variability but we can see that extreme
values also appear in the group of industrial companies (represented by a star on the graph). This
can explain the limited variability because the very specific cases are not taken into account in the
calculation. The last four practices show high values of variability (more than one point) and this is
the case both for industrial and service companies. Thus, the singularity of companies in the same
group in terms of innovation management seems to remain important.
Therefore the difference between industries and services does exist, particularly in project
management and design, but in view of the variability of evaluations it seems necessary to go down
to a lower level in order to identify whether these disparities are related to the business sector or
whether they represent the singularity of each company at its own level.
We therefore went into more detail, comparing the average profiles of business sectors that are well
represented in the database:
●● Agri-food industry, Energy, Electrical/electronic equipment and Mechanical/metallurgy
for industrial companies
●● Engineering and R&D, IT activities and Consulting for service companies.
First of all, there are significant differences between the business sectors of industrial companies
(Figure 6). It can be seen, for example, that the agri-food sector differs significantly from the other
three sectors represented, particularly in terms of strategy, which is weaker than for the other sectors.
Knowledge management also appears to be a significant weak point for the agri-food sector.
However, these results have to be balanced because of the high variability of this group in terms of
Design, Human Resources and Knowledge Management. It is interesting to note that the agri-food
companies seem to have a standardized profile concerning strategy, the generation of ideas and
project management. However, a high level of singularity appears in regard to the other innovation
practices.
The variability is not so important for the other business sectors except in certain specific cases. For
example, the design practice shows a high variability for the energy sector, as do human resources
and knowledge management for the mechanical sectors. However, some similarities can also be
identified. For all the industrial business sectors, human resources and knowledge management
practices are the weakest and strategy and design are the best. The mechanical and electronic sectors
show a good evaluation in terms of project management compared to the others two sectors. The
electronic sector is the best in terms of design and strategy.
This confirms that it is possible to identify some standardized observations specific to a particular
business sector, but a certain number of particularities have to be taken into account even for
companies from the same group.
For service companies (Figure 7), the differences between business sectors are also marked. The
engineering sector is very particular. Contrary to the global trend, this sector shows a good evaluation
in design practice. The IT sector has an average rating while the research and consulting sector shows
a rather low rating. Concerning knowledge management practice, the differences between business
sectors are also marked: an average assessment for the engineering sector and rather average for
IT and consulting. On the other hand, the strategy practice seems to be well evaluated for the three
sectors. Once again, it is possible to identify standard profiles, which must be balanced by a high
variability on specific practices: in particular design, project management and human resources.
plots underlines the importance of keeping in mind the uniqueness of each company, even within a
group with similar characteristics.
Acknowledgments
This work was supported partly by the French PIA project “Lorraine Université d’Excellence”,
reference ANR-15-IDEX-04-LUE.
References
J. A. Schumpeter, The Theory of Economic Development: An Inquiry Into Profits, Capital, Credit, Interest, and the
Business Cycle. Transaction Publishers, 1934.
P. S. Mortensen, Oslo Manual - Guidelines for Collecting and Interpreting Innovation Data, 3rd edition. Organisation
for Economic Cooporation and Development, OECD, 2005.
H. Edison, N. bin Ali, et R. Torkar, “Towards innovation measurement in the software industry”, Journal of Systems and
Software, vol. 86, no 5, p. 1390‑1407, May 2013.
E. Milbergs et N. S. Vonortas, “Innovation Metrics: Measurement to insight.”, in National Innovation Initiative, 21st
Century Innovation Working Group, 2004.
V. Chiesa, P. Coughlan, et C. A. Voss, “Development of a technical innovation audit”, Journal of Product Innovation
Management, vol. 13, no 2, p. 105‑136, Mar. 1996.
J. C. Guan, R. C. M. Yam, C. K. Mok, et N. Ma, “A study of the relationship between competitiveness and technological
innovation capability based on DEA models”, European Journal of Operational Research, vol. 170, no 3,
p. 971‑986, May 2006.
V. Boly, L. Morel, N. G. Assielou, et M. Camargo, “Evaluating innovative processes in French firms: Methodological
proposition for firm innovation capacity evaluation”, Research Policy, vol. 43, no 3, p. 608‑622, 2014.
H. B. Rejeb, L. Morel-Guimarães, V. Boly, et N. G. Assiélou, “Measuring innovation best practices: Improvement of
an innovation index integrating threshold and synergy effects”, Technovation, vol. 28, no 12, p. 838‑854,
Dec. 2008.
J. Corona, «Innovation et métrologie : une approche en terme d’indice d’innovation potentielle», Thèse de doctorat,
Institut National Polytechnique de Lorraine, 2005.
D. Galvez, M. Camargo, J. Rodriguez, et L. Morel, “PII - Potential Innovation Index: a Tool to Benchmark Innovation
Capabilities in International Context”, Journal of Technology Management & Innovation, vol. 8, no 4, p.
36‑45, Sept. 2013.
V. Boly, L. Morel, J. Renaud, et C. Guidat, “Innovation in low tech SMBs: evidence of a necessary constructivist
approach”, Technovation, vol. 20, no 3, p. 161‑168, Mar. 2000.
R. Corona-Armenta, L. Morel-Guimaraes, et V. Boly, “A methodology to measure the innovation processes capacities
in enterprises”, in IAMOT - International Conference on Management of Technology, VIENNE, Austria,
2005, p. 16, @Proceeding.
G. Assielou, «Evaluation des processus d’innovation», Thèse de doctorat, Institut National Polytechnique de Lorraine,
2008.
M. Godet, Manuel de prospective stratégique. Paris: Dunod, 1997.
D. Galvez, «Evaluation de la capacité à innover : Une approche par auto évaluation et suivi supporté par des analyses
multicritères dynamiques», Thèse de doctorat, Université de Lorraine, 2015.
M. Krzywinski et N. Altman, “Points of Significance: Visualizing samples with box plots”, Nature Methods, vol. 11, p.
119‑120, Jan. 2014.
H. Mintzberg, The Structuring of Organizations. Englewood Cliffs, N.J: Pearson, 1979.
Johannes W. Veile
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: johannes.veile@fau.de
Daniel Kiel
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: daniel.kiel@fau.de
Christian Arnold
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: christian.arnold@fau.de
Kai-Ingo Voigt
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: kai-ingo.voigt@fau.de
Corinne Bundscherer
Friedrich-Alexander University Erlangen-Nürnberg
Lange Gasse 20, 90403 Nürnberg, Germany
E-mail: corinne.bundscherer@fau.de
Abstract
“Industry 4.0” refers to digitized and connected industrial value creation. Future value creation is located in
digitized, intelligent, and connected factories and production networks. This development yields extensive and
industry-spanning opportunities, e.g., efficiency, quality, and flexibility increases, which affect human beings’ work
environment leading to new forms of human-machine collaboration. However, little is known about how to integrate
human beings into future smart factories wherefore we address this question. In this context, it is of interest (1)
what roles human beings take within the future industrial value creation processes, (2) how future workplaces are
designed, (3) which competences are required, (4) how to prepare human beings for future tasks, and (5) what actors
need to take action. The goal is to generate a deeper understanding of the complex human integration process in the
context of Industry 4.0.
In order to address the research gap, we carry out a systematic literature review. It is considered to be transparent,
replicable, and adequate to analyze the status quo of a research field. Following well-established research practice,
relevant literature is identified and analyzed along the following steps: definition of the relevant time horizon,
selection of scientific databases, selection of publication types, search and selection of relevant articles, synthesis of
results, and analysis of the findings.
Our study reveals insights about how to integrate human beings into smart factories. First, we find three scenarios–
automation, tool, and hybrid scenario – that determine future roles. Second, we find that machine-human-
interactions and technical designs are critical in terms of future workplace design. Third, our results indicate that
methodical, technical, social, and personal competences play crucial roles in the future. Fourth, learning factories,
e-learning, and trainings on-the-job are essential to sustainably integrate human beings. Last, companies, employee
representatives, research institutions, and politics need to take actions.
Our article is among the first to shed light into how to integrate human beings into smart factories and future
digitized and connected industrial value creation. We provide a comprehensive overview about the current state
of research contributing to the ongoing scientific and practical discourse on the future role and relevance of human
beings.
We provide managers with several implications on how to integrate humans sustainably into smart factories. Among
others, we show that from the very beginning on, humans need to be integrated into change management when
transforming industrial value creation. In addition, trainings and life-long-learning play a crucial role to ensure an
adequate integration process.
Our article develops a comprehensive overview of the latest research findings regarding integration of human
beings. Our study contributes to research concerning management of technology and innovation implementation
with special regard to the role of human beings and their interplay with modern technologies in our increasingly
dynamic, digital, and interconnected world.
Keywords: Industry 4.0, Industrial Internet of Things, Human Integration; Human Resource Management, Digital
Transformation, Systematic Literature Review
1. Introduction
Challenges such as volatile markets, shorter innovation cycles, increasing complexity of demanded
solutions, and an ongoing globalization increase the intensity and dynamics of international
competition in today’s economy (Arnold et al., 2017; Bauernhansl, 2014; Sendler, 2013).
The new industrial manufacturing paradigm “Industry 4.0“ refers to digitized and connected
industrial value creation and qualifies to address the aforementioned challenges and enhance
companies’ competitiveness (Arnold et al., 2016; Kagermann et al., 2013). It is characterized by
intelligently, horizontally, and vertically connecting people, machines, objects, and information and
communication technology (ICT) systems (Bauer et al., 2014). Technologies like cyber-physical
systems (CPS) merge the physical and the virtual worlds, creating intelligent production facilities
with digitally interconnected machines, storage systems, and facility equipment (Kagermann et al.,
2013; Siepmann, 2016). Subsequently, future value creation is located in digitized, real-time capable,
intelligent, connected, and autonomous factories (so-called “smart factories“) and production
networks (Hartmann, 2015; Kagermann et al., 2013).
However, Industry 4.0 does not only affect industrial value creation process itself, but has
consequences for the work environment of human beings and their way to work. For instance,
new types of machine collaboration emerge, which in turn has an impact on the work process, the
organization types, and required competencies and qualifications (Kagermann et al., 2013). Today,
human beings are crucial for industrial value creation, both in strategic and operative areas. Given
their current relevance along with the predicted changes, the question arises how human beings can
get integrated sustainably into future industrial value creation in the context of Industry 4.0? This
can be further divided into the following sub-questions:
1. Do human beings still play a major role in the future value creation process at all and,
if so, how will their roles look like?
2. What kind of approaches exist to design the workplaces?
3. Which are key competencies and skills that are required in future work environments?
4. How can human beings get prepared for their new tasks and working processes?
5. Who are actors and partners that enable and ensure a smooth integration process?
Answering these questions is necessary to provide corporate practice with information about how
to sustainably integrate human beings into future value creation that paves the way for long-term
corporate competitiveness and success.
Lately, research has begun to turn its focus to business and management aspects of Industry 4.0
including the integration of human beings resulting from the topic’s importance for companies’
future success. This has led to an increasing number of publications varying in content depth and
scope. The variety of research publications and findings motivated us to conduct a systematic
literature review that compiles, compares, and discusses insights concerning the integration of
human beings. In doing so, we provide an overview about the current state of research and the latest
findings on this topic, promote the on-going scientific discussion, and indicate areas for further
research. Additionally, our research study provides corporate practice with guidelines about how to
prepare their employees for future work. So far, no systematic literature has been undertaken, which
hampers and complicates building up and sharing knowledge about the integration of human beings
into future value creation.
The remainder of this paper is structured as follows. First, we lay the theoretical foundations by
explaining the concept “Industry 4.0“, its technological components, and aspects regarding human
beings’ integration. Then, we explain the methodological process of the systematic literature review.
The fourth chapter presents our findings and analyzes literature in detail. Afterwards, we discuss
the findings and answer the research questions. The last chapter summarizes our findings, discusses
limitations, provides management implications, and reveals further research areas.
2. Theoretical Background
3. Methodology
With our article, we dedicate ourselves to the question how to sustainably integrate human beings
in the context of Industry 4.0. Therefore, we choose a systematic literature review, as it allows us
to analyze the current state of research in a comprehensible, understandable, and reproducible way
(Fink, 2014; Machi & McEvoy, 2012). It helps us to highlight previously unobserved aspects and
unsolved challenges. The systematic review is based on common research practice (inter alia Soni
& Kodali, 2011): choosing time horizon, databases, and types of publication, developing a search
string, selecting relevant literature, and categorizing and analyzing the final pool of publications.
Figure 1: Searchstring
In addition to the English search string, we use its German equivalent as this allows us to include
further relevant literature. It turns out that the search strings have been chosen purposefully, since it
delivers relevant publications dealing with the subject of interest.
These categories and subsections are presented in detail in the following chapters. Furthermore, a
detailed assignment of all publications to the categories can be found in Table 1 in the Appendix.
4. Results
production systems require highly qualified employees (particularly technical specialists). Hirsch-
Kreinsen (2014) names them “winner of the technology boost”.
In terms of organization and personnel, working conditions are of particular importance as they
enable human beings to be flexible and promote their creativity, innovative capability, and goal-
oriented work (Dorst et al., 2015; Müller & Riedel, 2014). Spath et al. (2013b) propose the concept
of self-organized work assignment for human beings. Using mobile communication devices, they
coordinate their work independently within a decentralized organization. Instruments for enhancing
flexibility include, among others, overtime hours, flexible working time models, and home office.
It is of particular importance that human beings are provided with valuable information in order
to get jobs done. Stocker et al. (2014) and Hannola et al. (2016) define four application cases for
knowledge management in human-centered production. Firstly, they describe augmented reality to
support human beings. “Augmented operators“, e.g., data glasses, provide context-relevant data and
support human beings in solving a task. Secondly, production knowledge management should be
established to share information and make knowledge accessible. Thirdly, the authors propose self-
learning workstations based on the continuous evaluation of data. Fourthly, mobile, personalized,
and situation-adaptive learning systems enable lifelong learning.
hand, they get into contact with new methods. Nevertheless, there are some obstacles when using
learning factories. So far, there is a lack of didactic foundations as well as pedagogical concepts
for applying this teaching method. In addition, unifying initial education and further training for
teachers proves to be difficult due to huge differences between facilities (Scheid, 2017).
4.4.3. E-learning
The term “e-learning” summarizes technology-based forms of learning, e.g., web-based trainings
and learning movies (Ring, 2017). As for Industry 4.0, using Virtual Learning Environments in
trainings and further education is the focus of scientific discussions. Using virtual reality and an
interface, e.g., data glasses, human beings can be put into fictional situations. With a virtual figure,
an avatar, they can move through a simulated environment and execute actions. When integrating
gamification elements, knowledge can be imparted in a playful manner when solving tasks (Schuster
et al., 2015). In case real elements are simulated in the virtual world, this is referred to as “virtual
reality”. In a 3D learning environment, machines and systems are authentically simulated (Guo,
2015). Virtual learning environments should provide constant feedback and encourage collaboration
to solve tasks. This procedure offers the advantage of conveying knowledge in a flexible and
resource-conserving way, while addressing several senses and thus enabling in-depth learning (Guo,
2015; Schuster et al., 2015). In addition, collaboration with robots should be practiced in trainings
(Richert et al., 2016).
4.5. Actors
In order to prepare human beings for Industry 4.0, literature indicates companies, employee
representatives, educational institutions, and politics as relevant actors.
4.5.1. Companies
Due to an ageing workforce, companies should define measures to keep their employees healthy and
fit for work. These include setting up ergonomic workplaces and offering workout facilities (Müller
et al., 2016). In addition to physical fitness, it is important that human beings’ cognitive performance
and mental health are not only maintained but also further enhanced (Ludwig et al., 2016).
Qualification and knowledge management are of further importance. This includes providing
trainings and further education for employees as well as establishing training methods and systems
to share and storage knowledge (Acatech, 2016b; Eichhorst & Buhlmann, 2015; Pfeiffer & Suphan,
2015). Management expertise and transparency for employees are particularly important to create
awareness for new developments and to build up Industry 4.0-related knowledge (Müller et al., 2016).
Kössel and Heckner (2015) state that managers are decisive factors for employee development.
They should be trained to successfully drive change management, e.g., by recreating organizational
structures (Acatech, 2016b). In order to recruit and sustainably retain qualified personnel, companies
must ensure their competitiveness with regard to employer attractiveness. This includes attractive
training programs and a good work-life balance (Ludwig et al., 2016; Pfeiffer, 2015). Employees’
data protection must be guaranteed at all times. Approaches include data anonymization, regular
deletion routines, and deploying dedicated data protection officers (Hornung & Hofmann, 2015).
4.5.4. Politics
Politics has the responsibility to coordinate and manage social changes that Industry 4.0 brings up.
The goal is to establish an adequate educational system and job conditions with suitable work-life
balance. Politics should create favorable framework conditions, e.g., supporting educational institutes
(Buhr, 2015). Increasing labor market dynamics force politics to provide human beings with the
possibilities to get qualifications and to support them, e.g., via counselling centers (Weber, 2016).
It is predicted that the number of self-employed will increase, given new market opportunities, e.g.
for ITbased platform business models, and subsequently politics has to find solutions for their social
security. For instance, the German Federal Ministry of Labor and Social Affairs (2017) considers
expanding social security system as future obligation, for instance setting up the legal framework
for new working time models as well as for occupational safety and human beings’ data protection.
5. Discussion
the tool scenario, some scientists consider a hybrid scenario as probable. However, there are no exact
definitions or descriptions about the scenarios why some aspects are partly overlapping while other
aspects are completely neglected. In this context, it remains unclear whether the hybrid scenario is
a combination of automation and tool scenario or whether it does represent a milestone on the way
to one of the extreme scenarios (Stock-Homburg, 2013; Windelband, 2014). In the two extreme
scenarios, there are fewer jobs for unskilled to semi-skilled employees. The demand for high-
qualified employees increases regardless of which scenario is considered. Whether Industry 4.0 will
lead to an up- or downgrading of skilled employees’ work, highly depends on the scenario and the
underlying assumptions respectively (Hirsch-Kreinsen, 2014; Windelband, 2014).
Most of the examined publications deal with workplace design (28 of 89 articles). The focus lies on
human-centred designs which allows drawing the conclusion that human beings still play a major
role in Industry 4.0 (Dorst et al., 2015). Human-machine collaboration becomes a central topic with
consequences for workplace design. Communication between human beings and intelligent systems
takes place via intuitive interfaces. Knowledge management concepts provide human beings with
important information so that they serve as active decision-makers (Deuse et al., 2015b).
19 of 89 articles make future human competences subject of discussion. In scientific literature,
methodological and technical competences are discussed to be crucial. Additionally, social and
personal competences are an essential basis for acquiring further competences (Dombrowski et
al., 2014). Our results indicate that in the future, human beings should work independently and
reflectively, and must be willing to learn throughout their lives to gain an understanding of systems
and complex interrelationships.
In the discussion about human preparation (15 of 89 articles), the focus lies on learning factories,
virtual learning environments, and work systems that promote learning. Most publications emphasize
the importance of work systems that promote learning, whereas concrete models are still missing.
There are few models that recognize qualification needs except for the described maturity models.
Literature dealing with relevant actors (17 of 89 articles) reveals that particularly companies bear
wide-ranging responsibilities. Further training measures and maintaining employer attractiveness
are frequently mentioned. Employee representatives should focus on protecting employees on
all hierarchical levels. Educational institutions should fulfil their duty to tailor learning content
to Industry 4.0-specific requirements (Acatech, 2016b). To ensure that human beings are well-
qualified, politics should further equip educational institutions with sufficient financial resources
(Buhr, 2015).
Having a look at the years of publications reveals that the number of publications on the topic has
increased since 2011 reaching a peak in 2015. The increase of publications since 2011 can partly be
attributed to the Federal Government of Germany appointing Industry 4.0 as a future project the very
same year. This may also explain a comparably high proportion of German-language literature (59
out of 89 publications). The 89 publications comprise 37 articles in book compilations, 15 journal
articles, 15 articles published in conference proceedings, 13 studies, six reports, two working papers,
and one book. Figure 3 indicates the publication timeline differentiated by publication types.
6. Conclusion
In our paper, we conduct a systematic literature review to answer the research question of how
human beings can be integrated into future smart factories in the context of Industry 4.0. Based on
an analysis of 89 publications from 2010 to 2017, the paper at hand provides an overview of the
state of research on the integration of human beings. We review, categorize, evaluate, and discuss
the current state of research following common research practice.
Our results show that the role of human beings in the future industrial value creation has not been
defined conclusively. However, research agrees upon that human beings will continue to be central
pillar of future industrial value creation. They will be given new tasks that require new methodical,
technological, social, and personal skills. In order to prepare them, there are approaches, e.g., learning
factories and virtual learning environments. Furthermore, workplace trainings and opportunities
for lifelong learning must be expanded. Companies and managers, employee representatives and
workers’ councils, educational institutes, and politics are major actors. Particularly companies bear
a great deal of responsibility and should take measures to successfully implement Industry 4.0 by
including human beings and considering their needs. Employee representatives have the task to
protect human beings with regard to health, data, and working hours. Politics should strengthen the
educational system and set up the juridical framework. Educational institutes are recommended to
expand their portfolio of schooling and trainings to teach future obligatory qualifications.
In our paper, we reveal further research areas to generate a deeper understanding of the social
perspective of Industry 4.0. Furthermore, analyzing existing scientific literature derives management
implications that help corporate practice to take measures for a smooth and successful integration of
employees into Industry 4.0. Our paper strives for intensifying the scientific and practical discussion
with regard to the integration of human beings into future value creation.
Acknowledgment
This publication was developed and sponsored within the project “Sustainable Smart Industry - The
Industrial Internet of Things as a Model for Sustainable Industrial Value Creation” by the Emerging
Fields Initiative (EFI) at the Friedrich-Alexander University Erlangen-Nürnberg.
References
Acatech (2016a). Innovationspotenziale der Mensch-Maschine-Interaktion. Munich, Germany: Herbert Utz.
Acatech (2016b). Kompetenzentwicklungsstudie Industrie 4.0. Erste Ergebnisse und Schlussfolgerungen, Munich,
Germany: Acatech.
Adolph, L., Anlahr, T., Bedenbender, H., Bentkus, A., Brumby, L., Diedrich, C., …Winkel, L. (2016). German
Standardization Roadmap. Industry 4.0. Berlin & Frankfurt, Germany: DIN & DKE.
Ahrens, D., & Spöttl, G. (2015). Industrie 4.0 und Herausforderungen für die Qualifizierung von Fachkräften. In H.
Hirsch-Kreinsen, P. Ittermann & J. Niehaus (Eds.), Digitalisierung industrieller Arbeit. Die Vision Industrie
4.0 und ihre sozialen Herausforderungen (pp. 185-205). Baden-Baden, Germany: Nomos.
Arnold, C., Kiel, D., & Voigt, K.-I. (2016). How the Industrial Internet of Things Changes Business Models in Different
Manufacturing Industries. International Journal of Innovation Management, 20(8), 1640015.
Arnold, C., Kiel, D., & Voigt, K.-I. (2017). The Driving Role of the Industrial Internet of Things for Strategic Change:
The Case of Electronic Engineering Business Models. Proceedings of the 24th Innovation and Product
Development Management Conference (IPDMC). Reykjavik, Iceland, June 11-13, 2017.
Bauer, W, Schlund, S., Marrenbach, D., & Ganschar, O. (2014). Industrie 4.0 — Volkswirtschaftliches Potenzial für
Deutschland. Berlin: BITKOM, Fraunhofer IAO.
Bauer, W., Hämmerle, M., Schlund, S., & Vocke, C. (2015). Transforming to a Hyper-connected Society and Economy
– Towards an “Industry 4.0”. Procedia Manufacturing, 3, 417-424.
Bauernhansl, T. (2014). Die Vierte Industrielle Revolution – Der Weg in ein wertschaffendes Produktionsparadigma. In
T. Bauernhansl, M. ten Hompel & B. Vogel-Heuser (Eds.), Industrie 4.0 in Produktion, Automatisierung und
Logistik. Anwendung, Technologien, Migration (pp. 5-34). Wiesbaden, Germany: Springer.
Becker, K.-D. (2015a). Arbeit in der Industrie 4.0 – Erwartungen des Instituts für angewandte Arbeitswissenschaft e.V. In
A. Botthof & E. A. Hartmann (Eds.), Zukunft der Arbeit in Industrie 4.0 (pp. 23-30). Berlin, Germany: Springer.
Becker, M. (2015b). Roadmap Industry 4.0 – Implementation Guideline for Enterprises. In J. Gutmann & K. Schwuchow
(Eds.), Personalentwicklung. Themen, Trends, Best Practices 2016 (pp. 200-209). Freiburg, Germany:
Haufe-Lexware.
Bonekamp, L., & Sure, M. (2015). Consequences of Industry 4.0 on Human Labour and Work Organisation. Journal of
Business and Media Psychology, 6(1), 33-40.
Brauner, P., & Ziefle, M. (2015). Human Factors in Production Systems. In C. Brecher (Ed.), Advances in production
technology (pp. 187-199). Cham, Switzerland: Springer.
Brynjolfsson, E., & McAfee, A. (2011). The second machine age. Work, progress, and prosperity in a time of brilliant
technologies. New York, NY, USA: Norton.
Buhr, D. (2015). Social innovation policy for Industry 4.0. Bonn, Germany: Friedrich-Ebert-Stiftung.
Dengler, K., & Matthes, B. (2015). Folgen der Digitalisierung für die Arbeitswelt. Substituierbarkeitspotenziale von
Berufen in Deutschland. IAB Forschungsbericht Nr. 11. Nuremberg, Germany: Institut für Arbeitsmarkt-
und Berufsforschung.
Deuse, J., Busch, F., Weisner, K., & Steffen, M. (2015a). Gestaltung sozio-technischer Arbeitssysteme für Industrie 4.0.
In H. Hirsch-Kreinsen, P. Ittermann & J. Niehaus (Eds.), Digitalisierung industrieller Arbeit. Die Vision
Industrie 4.0 und ihre sozialen Herausforderungen (pp. 147-164). Baden-Baden, Germany: Nomos.
Deuse, J., Weisner, K., Hengstebeck, A., & Busch, F. (2015b). Gestaltung von Produktionssystemen im Kontext von
Industrie 4.0. In A. Botthof & E. A. Hartmann (Eds.), Zukunft der Arbeit in Industrie 4.0 (pp. 99-109).
Berlin, Germany: Springer.
Dombrowski, U., & Wagner, T. (2014). Mental Strain as Field of Action in the 4th Industrial Revolution. Procedia
CIRP, 17, 100-105.
Dombrowski, U., Riechel, C., & Evers, M. (2014). Industrie 4.0 – Die Rolle des Menschen in der vierten industriellen
Revolution. In W. Kersten, H. Koller & H. Lödding (Eds.), Industrie 4.0. Wie intelligente Vernetzung und
kognitive Systeme unsere Arbeit verändern (pp. 129-153). Berlin: Gito.
Dorst, W., Glohr, C., Hahn, T., Knafla, F., Loewen, U., Rosen, R., … Sandner, M. (2015). Umsetzungsstrategie Industrie
4.0. Ergebnisbericht der Plattform Industrie 4.0. Berlin & Frankfurt, Germany: BITKOM, VDMA & ZVEI.
Eder, A. (2015). Akzeptanz von Bildungstechnologien in der gewerblich-technischen Berufsbildung vor dem
Hintergrund von Industrie 4.0. Journal of Technical Education, 3(2), 19-44.
Eichhorst, W., & Buhlmann, F. (2015). Die Zukunft der Arbeit und der Wandel der Arbeitswelt. IZA Standpunkte Nr.
77. Bonn, Germany: IZA.
Faber, M., Bützler, J., & Schlick, C. M. (2015). Human-robot Cooperation in Future Production Systems. Analysis of
Requirements for Designing an Ergonomic Work System. Procedia Manufacturing, 3, 510-517.
Fast-Berglund, Å., Palmkvist, F., Nyqvist, P., Ekered, S., & Åkerman, M. (2016). Evaluating Cobots for Final Assembly.
Procedia CIRP, 44, 175-180.
Fink, A. (2014). Conducting research literature reviews. From the internet to paper (4th Ed.). Los Angeles, CA, United
States: Sage.
Frey, C. B., & Osborne, M. A. (2013). The Future of Employment: How suspectible are Jobs to Computerisation.
Oxford, United Kingdom.
Galaske, N., Christ, A., & Anderl, R. (2014). Integration von Menschen in Smart Factories: Ein individualisierbares
Profildatenmodell für Industrie 4.0. In D. Krause, K. Paetzold & S. Wartzack (Eds.), Design for X. Beiträge
zum 25. DfX-Symposium Oktober 2014 (pp. 133-144). Hamburg, Germany: TuTech.
Gambao, E., Hernando, M., & Surdilovic, D. (2012) A new generation of collaborative robots for material handling.
Gerontechnology, 11(2), 368-374.
Gebhardt, J., Grimm, A., & Neugebauer, L. M. (2015). Entwicklungen 4.0 – Ausblicke auf zukünftige Anforderungen an
und Auswirkungen auf Arbeit und Ausbildung. Journal of Technical Education, 3(2), 45-61.
Gehrke, L., Kühn, A. T., Rule, D., Moore, P., Bellmann, C., Siemes, S., …, Standley, M. (2015). Industry 4.0. A
Discussion of Qualifications and Skills in the Factory of the Future: A German and American Perspective.
Duesseldorf, Germany: VDI, ASME.
Geisberger, E., & Broy, M. (2012). agendaCPS. Integrierte Forschungsagenda Cyber-Physical Systems. acatech
STUDIE. Berlin, Heidelberg, Germany: Springer.
German Chamber of Industry and Commerce (2016). Auswirkungen von Wirtschaft 4.0 auf die berufliche Aus- und
Weiterbildung. Stuttgart, Germany: Chamber of Industry and Commerce.
German Federal Ministry of Labour and Social Affairs (2017). Weissbuch Arbeiten 4.0. Berlin, Germany: German
Federal Ministry of Labour and Social Affairs.
Gorecky, D., Schmitt, M., & Loskyll, M. (2014). Mensch-Maschine-Interaktion im Industrie 4.0 Zeitalter. In T.
Bauernhansl, M. ten Hompel & B. Vogel-Heuser (Eds.), Industrie 4.0 in Produktion, Automatisierung und
Logistik. Anwendung, Technologien, Migration (pp. 525-542). Wiesbaden, Germany: Springer.
Gorecky, D., Schmitt, M., Loskyll, M., & Zühlke, D. (2014). Human-Machine-Interaction in the Industry 4.0 Era.
Proceedings of the 12th IEEE International Conference on Industrial Informatics (INDIN 2014). Porto
Alegre, Brazil, July 27-30 2014.
Gronau, N., Ullrich, A., & Vladova, G. (2015). Prozessbezogene und visionäre Weiterbildungskonzepte im Kontext
Industrie 4.0. In H. Meier (Eds.), Lehren und Lernen für die moderne Arbeitswelt (pp. 125-143). Berlin,
Germany: Gito.
Grote, G. (2015). Gestaltungsansätze für das komplementäre Zusammenwirken von Mensch und Technik in Industrie
4.0. In H. Hirsch-Kreinsen, P. Ittermann & J. Niehaus (Eds.), Digitalisierung industrieller Arbeit. Die Vision
Industrie 4.0 und ihre sozialen Herausforderungen (pp. 132-147). Baden-Baden, Germany: Nomos.
Günthner, W., Klenk, E., & Tenerowicz-Wirth, P. (2017). Adaptive Logistiksysteme als Wegbereiter der Industrie 4.0.
In B. Vogel-Heuser, T. Bauernhansl & M. ten Hompel (Eds.), Handbuch Industrie 4.0 (4th Ed.) (pp. 97-123).
Berlin, Germany: Springer.
Guo, Q. (2015). Learning in a Mixed Reality System in the Context of “Industrie 4.0”. Journal of Technical Education,
3(2), 92115.
Hannola, L., Heinrich, P., Richter, A., & Stocker, A. (2016). Sociotechnical challenges in knowledge-intensive production
environments. Proceedings of the 17th ISPIM Innovation Conference. Porto, Portugal, June 19-22 2016.
Hartmann, E. (2015). Arbeitsgestaltung für Industrie 4.0: Alte Wahrheiten, neue Herausforderungen. In A. Botthof & E.
A. Hartmann (Eds.), Zukunft der Arbeit in Industrie 4.0 (pp. 9-20). Berlin, Germany: Springer.
Hecklau, F., Galeitzke, M., Flachs, S., & Kohl, H. (2016). Holistic Approach for Human Resource Management in
Industry 4.0. Procedia CIRP, 54, 1-6.
Hirsch-Kreinsen, H. (2014). Wandel von Produktionsarbeit – „Industrie 4.0“. Sociological working paper No. 38,
Dortmund, Germany: Technical University Dortmund.
Hornung, G., & Hofmann, K. (2015). Datenschutz als Herausforderung der Arbeit in der Industrie 4.0. In H. Hirsch-
Kreinsen, P. Ittermann & J. Niehaus (Eds.), Digitalisierung industrieller Arbeit. Die Vision Industrie 4.0 und
ihre sozialen Herausforderungen (pp. 166-183). Baden-Baden, Germany: Nomos.
Ittermann, P., & Niehaus, J. (2015). Industrie 4.0 und Wandel von Industriearbeit. Überblick über Forschungsstand und
Trendbestimmungen. In H. Hirsch-Kreinsen, P. Ittermann & J. Niehaus (Eds.), Digitalisierung industrieller
Arbeit. Die Vision Industrie 4.0 und ihre sozialen Herausforderungen (pp. 33-51). Baden-Baden, Germany:
Nomos.
Kagermann, H., Wahlster, W., & Helbig, J. (2013). Umsetzungsempfehlung für das Zukunftsprojekt Industrie 4.0.
Abschlussbericht des Arbeitskreises Industrie 4.0. Promotorengruppe Kommunikation der Forschungsunion
Wirtschaft - Wissenschaft. Frankfurt, Germany: Acatech.
Kärcher, B. (2015). Alternative Wege in die Industrie 4.0 – Möglichkeiten und Grenzen. In A. Botthof & E. A. Hartmann
(Eds.), Zukunft der Arbeit in Industrie 4.0 (pp. 47-58). Berlin, Germany: Springer.
Kiel, D. (2017). What do we know about “Industry 4.0” so far? Proceedings of the 26th International Association for
Management of Technology (IAMOT). Vienna, Austria, May 14-18 2017.
Kössel, O., & Heckner, K. (2015). Personalentwicklung für die Industrie 4.0. In J. Gutmann & K. Schwuchow (Eds.),
Personalentwicklung. Themen, Trends, Best Practices 2016 (pp. 206-213). Freiburg, Germany: Haufe-Lexware.
Kuhlang, P., Finsterbusch, T., Busenbach, M., Britzke, B., Mühlbradt, T., & Kille, K. (2014). Die Arbeit (auch) vom
Menschen her denken: Modellierung produktiver Arbeit – Eine Kernaufgabe bei Industrie 4.0. In W.
Kersten, H. Koller & H. Lödding (Eds.), Industrie 4.0. Wie intelligente Vernetzung und kognitive Systeme
unsere Arbeit verändern (pp. 13-36). Berlin, Germany: Gito
Lichtblau, K., Stich, V., Bertenrath, R., Blum, M., Bleider, M., Millack, A., … Schröter, M. (2015). Industrie 4.0 -
Readiness. Aachen, Köln, Germany: VDMA.
Lingitz, L., Hold, P., Glawar, R., & Sihn, W. (2014). Integration von Lösungskompetenz operativer Mitarbeiter des
Shop-Floors in die Produktionsplanung und -steuerung. In W. Kersten, H. Koller & H. Lödding (Eds.),
Industrie 4.0. Wie intelligente Vernetzung und kognitive Systeme unsere Arbeit verändern (pp. 177-197).
Berlin, Germany: Gito.
Lüder, A. (2014). Integration des Menschen in Szenarien der Industrie 4.0. In T. Bauernhansl, M. ten Hompel & B.
Vogel-Heuser (Eds.), Industrie 4.0 in Produktion, Automatisierung und Logistik. Anwendung, Technologien,
Migration (pp. 493-507). Wiesbaden, Germany: Springer.
Lüdtke, A. (2015). Wege aus der Ironie in Richtung ernsthafter Automatisierung. In A. Botthof & E. A. Hartmann (Eds.),
Zukunft der Arbeit in Industrie 4.0 (pp. 125-146). Berlin, Germany: Springer.
Ludwig, T., Kotthaus, C., Stein, M., Durt, H., Kurz, C., Wenz, J., … Wulf, V. (2016). Arbeiten im Mittelstand 4.0 –
KMU im Spannungsfeld des digitalen Wandels. HMD Praxis der Wirtschaftsinformatik, 53(1), 71-86.
Machi, L. A., & McEvoy, B. T. (2012). The Literature Review. Six steps to success. Thousand Oaks, CA, United States:
Corwin.
Matt, D. T., & Rauch, E. (2014). Chancen zur Bewältigung des Fachkräftemangels in KMU durch die Urbane Produktion
von morgen. In W. Kersten, H. Koller & H. Lödding (Eds.), Industrie 4.0. Wie intelligente Vernetzung und
kognitive Systeme unsere Arbeit verändern (pp. 152-176). Berlin, Germany: Gito.
Mavrikios, D., Papakostas, N., Mourtzis, D., & Chryssolouris, G. (2013). On industrial learning and training for
the factories of the future. A conceptual, cognitive, and technology framework. Journal of Intelligent
Manufacturing, 24(3), 473-485.
Schlund, S., Hämmerle, M., & Strölin, T. (2014). Industrie 4.0 – Eine Revolution der Arbeitsgestaltung. Ulm, Germany:
Ingenics, Frauenhofer IAO.
Schuster, K., Plumanns, L., Groß, K., Vossen, R., Richert, A., & Jeschke, S. (2015). Preparing for Industry 4.0 – Testing
Collaborative Virtual Learning Environments with Students and Professional Trainers. International Journal
of Advanced Corporate Learning, 8(4), 14-20.
Senderek, R., Mühlbradt, T., & Buschmeyer, A. (2015). Demografiesensibles Kompetenzmanagement für die Industrie
4.0. In S. Jeschke (Ed.), Exploring demographics. Transdisziplinäre Perspektiven zur Innovationsfähigkeit
im demografischen Wandel (pp. 281-295). Wiesbaden, Germany: Springer.
Sendler, U. (2013). Industrie 4.0– Beherrschung der industriellen Komplexität mit SysLM (Systems Lifecycle
Management). In U. Sendler (Ed.), Industrie 4.0. Beherrschung der industriellen Komplexität mit SysLM
(pp. 1-19). Berlin, Germany: Springer.
Seo, S. H., Gu, J., Jeong, S., Griffin, K., Young, J. E., Bunt, A., & Prentice, S. (2015). Women and Men Collaborating
with Robots on Assembly Lines: Designing a Novel Evaluation Scenario for Collocated Human-Robot
Teamwork. Proceedings of the Third International Conference on Human-Agent Interaction (HAI). Daegu,
Kyungpook, South Korea, October 21-24 2015.
Siepmann, D. (2016). Industrie 4.0 – Struktur und Historie. In A. Roth (Ed.), Einführung und Umsetzung von Industrie
4.0 (pp. 17-73). Berlin, Germany: Springer.
Soni, G., & Kodali, R. (2011). A critical analysis of supply chain management content in empirical research. Business
Process Management Journal, 17(2), 238-266.
Spath, D., Ganschar, O., Gerlach, S., Hämmerle, M., Krause, T., & Schlund, S. (2013a). Produktionsarbeit der Zukunft
– Industrie 4.0. Stuttgart, Germany: Fraunhofer.
Spath, D., Schlund, S., Gerlach, S., Hämmerle, M., & Krause, T. (2013b). Ausblick: Produktionsprozesse im Jahr
2030. In A.-W. Scheer (Ed.), Industrie 4.0 – Wie sehen Produktionsprozesse im Jahr 2020 aus? (pp. 55-63).
Saarbrueken, Germany: IMC.
Stich, V., Gudergan, G., & Senderek, R. (2015). Arbeiten und Lernen in der digitalisierten Welt. In H. Hirsch-Kreinsen,
P. Ittermann & J. Niehaus (Eds.), Digitalisierung industrieller Arbeit. Die Vision Industrie 4.0 und ihre
sozialen Herausforderungen (pp. 108-131). Baden-Baden, Germany: Nomos.
Stocker, A., Brandl, P., Michalczuk, R., & Rosenberger, M. (2014). Mensch-zentrierte IKT-Lösungen in einer Smart
Factory. Elektrotechnik und Informationstechnik, 131(7), 207-211.
Stock-Homburg, R. (2013). Zukunft der Arbeitswelt 2030 als Herausforderung des Personalmanagements. In R.
Stock-Homburg (Ed.), Handbuch Strategisches Personalmanagement (pp. 604-627). Wiesbaden, Germany:
Springer Gabler.
Störmer, E., Patscha, C., Prendergast, J., Daheim, C., & Rhisiart, M. (2014). The Future of Work. Jobs and Skills in
2030. Wath-upon-Dearne, United Kingdom: UKCES.
Tödter, J., Viereck, V., Krüger-Basjmeleh, T., & Wittmann, T. (2015). Steigerung des Autonomiegrades von autonomen
Transportrobotern im Bereich der Intralogistik – technische Entwicklungen und Implikationen für die
Arbeitswelt 4.0. In A. Botthof & E. A. Hartmann (Eds.), Zukunft der Arbeit in Industrie 4.0 (pp. 69-75).
Berlin, Germany: Springer.
Weber, E. (2016). Industrie 4.0. Wirkungen auf den Arbeitsmarkt und politische Herausforderungen. Zeitschrift für
Wirtschaftspolitik, 65(1), 66-74.
Wilkens, U., Süße, T., & Voigt, B.-F. (2014). Umgang mit Paradoxien von Industrie 4.0 – Die Bedeutung reflexiven
Arbeitshandelns. In W. Kersten, H. Koller & H. Lödding (Eds.), Industrie 4.0. Wie intelligente Vernetzung
und kognitive Systeme unsere Arbeit verändern (pp. 199-210). Berlin, Germany: Gito.
Windelband, L. (2014). Zukunft der Facharbeit im Zeitalter „Industrie 4.0“. Journal of Technical Education, 2(2), 137-160.
Windelband, L., & Dworschak, B. (2015). Arbeit und Kompetenzen in der Industrie 4.0. Anwendungsszenarien
Instandhaltung und Leichtbaurobotik. In H. Hirsch-Kreinsen, P. Ittermann & J. Niehaus (Eds.),
Digitalisierung industrieller Arbeit. Die Vision Industrie 4.0 und ihre sozialen Herausforderungen (pp. 71-
86). Baden-Baden, Germany: Nomos.
Windelband, L., & Spöttl, G. (2012). Diffusion von Technologien in die Facharbeit und deren Konsequenzen für die
Qualifizierung am Beispiel des „Internet der Dinge“. In B. Fürstenau, U. Faßhauer & E. Wuttke (Eds.), Berufs-
und wirtschaftspädagogische Analysen – aktuelle Forschungen zur beruflichen Bildung (pp. 205-219). Berlin,
Germany: Budrich.
Wischmann, S. (2015). Arbeitssystemgestaltung im Spannungsfeld zwischen Organisation und Mensch-Technik-
Interaktion – das Beispiel Robotik. In A. Botthof & E. A. Hartmann (Eds.), Zukunft der Arbeit in Industrie
4.0 (pp. 149-160). Berlin, Germany: Springer.
Wolter, M. I., Mönning, A., Hummel, M., Schneemann, C., Weber, E., Zika, G., … Neuber-Pohl, C. (2015). Industrie
4.0 und die Folgen für Arbeitsmarkt und Wirtschaft. Szenario-Rechnungen im Rahmen der BIBB-IAB-
Qualifikations- und Berufsfeldprojektionen. IAB Research Report No. 8. Nuremberg, Germany: IAB.
Zeller, B., Achtenhagen, C., & Föst, S. (2010). Das „Internet der Dinge“ in der industriellen Produktion – Studie zu
künftigen Qualifikationserfordernissen auf Fachkräfteebene. Nuremberg, Germany: Forschungsinstitut
Betriebliche Bildung.
Appendix
Table 1: Detailed Analysis and Assignment of the Research Publications
Field of research
(1) (2) (3) (4) (5)
Author(s) (Year) Humans' Designing Required Preparation Actors
future roles workplaces competencies human beings
Total result 19 28 19 15 17
Acatech (2016a) X
Acatech (2016b) X
Adolph et al. (2016) X
Ahrens & Spöttl (2015) X
Bauer et al. (2015) X
Becker (2015a) X
Becker (2015b) X
Bonekamp & Sure (2015) X
Brauner & Ziefle (2012) X
Brynjolfsson & McAfee (2011) X
Buhr (2017) X
Dengler & Matthes (2015) X
Deuse et al. (2015a) X X
Deuse et al. (2015b) X X
Dombrowski & Wagner (2014) X
Dombrowski et al. (2014) X
Dorst et al. (2015) X
Eder (2015) X
Eichhorst & Buhlmann (2015) X X
Faber et al. (2015) X
Fast-Berglund et al. (2016) X
Frey & Osborne (2013) X
Galaske et al. (2014) X
Gambao et al. (2012) X
Gebhardt et al. (2015) X
Gehrke et al. (2015) X
German Chamber of Industry and Commerce (2016) x
German Federal Ministry of Labour and Social Affairs (2017)
Gorecky et al. (2014) X
Gronau et al. (2015) X
Grote (2015) X
Günthner et al. (2017) X
Guo (2015) X
Hannola et al. (2016) X
Hartmann (2015) X
Hecklau et al. (2016) X X
Hirsch-Kreinsen (2014) X
Hornung & Hofmann (2015) X
Ittermann & Niehaus (2015) X
Kärcher (2015) X
Kössel & Heckner (2015) X X
Kuhlang et al. (2014) X
Lichtblau et al. (2015) X
Lingitz et al. (2014) X
Lüder (2014) X
Kazuo Hatakeyama
Enterprise Consulting Office/ Salvador, Bahia, Brazil
E-mail: khatakeyama875@gmail.com
Abstract
The paper has the objective to purpose the method of the forecast of the human development index (HDI) by means
of neural networks considering five dimensions composed by variables built, from the objectives of sustainable
development (OSD). Thus, the twenty independent variables predicted individually by the methods of probabilistic
time series and the dependent variable the HDI by the neural networks Multilayer Perception. The aim of the study
was the forecast of the calculation of the Brazilian HDI from the year 2018 until 2030. The results were that the
country surveyed needs effective action in all dimensions, however, the health and gender are those that present
minor indexes of growth in the calculation of the HDI. However, the inclusion of two new dimensions of the HDI
and the utilization of the OSD as variables to calculate it is the way to assist government actions of countries that
they seek the human development index from the sustainable development.
Keywords: Human Development Index, Objectives Sustainable Development, Forecast, Neural Networks
1. Introduction
Human Development Index (HDI) published annually by the United Nations Development Program
(UNDP) considered in this study. This is an important indicator with the aim to measure the welfare
of the society, by means of calculation constituted of three dimensions: longevity; the access to
knowledge; and a decent life standard (UNDP, 2018). The longevity of the person measured by
the life expectancy, in years, being the difference from the birth to the death. The access to the
knowledge measured by the education indicator composed of two different indexes, the index of
average years of study and the index of expected years of study. Finally, a decent standard of quality
life is facing the analysis of the Gross Domestic Product (GDP) of the country [purchasing power]
per capita adjusted to the local cost of living.
The HDI broadly utilized as the reference of measure to diagnose the development of nations, as
well as to help government administrators in their decisions for the utilization of resources in public
policy in order to develop the quality of life of its inhabitants (Monteiro, Perreira, Costa, 2018).
When the three dimensions of the calculation of the HDI present low values, or at least one or two of
them this result can reveal inefficiency in the management of the public Money and, as consequence
lack of quality of life for the inhabitants of the country. In contrast, countries with a high index of
HDI present high development of the public service and quality of life for its inhabitants.
However, several type of research perform appointments on the fragility of the actual calculation
method of the HDI and that its three dimensions do not get the real quality of life measure of the
inhabitants of the country. Among several results found, appointments as to the HDI consider only
three variables of different dimensions, excluding social indexes as the difference of quality of life
among genders and environmental indexes as in the countries with large levels of pollution o animals
in extinction. The calculation of HDI utilizes the geometric media neglecting the relative importance
in the normalized indexes of three dimensions in the countries evaluated even using weights and these
indexes divided by the same number of the dimensions (Bilbao-Ubillos, 2013, Ramos et al., 2018).
Thus, the classification that countries receive through of the HDI presents doubts if truly reflect the
real quality of life of the inhabitants and help its managers for the development of their countries.
UNDP (2018) created in 2015 the Objectives of Sustainable Development (OSD). This has
as function deliberate one agenda in common of sustainable development of all nations from
the search of the economic growth, social inclusion and environmental protection until 2030
(Stafford-Smith et al., 2016; Cajado et al., 2018). In this agenda has the 17 objectives built after the
success of the Objectives of Development of the Millennium, these were developed in the General
Assembly of the United Nations. These objectives, accepted by 193 member countries of the United
Nations with the general intent to incentive and guide them to promote better government actions,
aiming to reduce or solve social and environmental problems.
This paper has the objective to purpose the forecast method of the HDI by means of neural networks
with five dimensions composed by variables built from the OSD. The aim of this study was to
perform the forecast of the Brazilian HDI from 2017 to 2030 by means of new way of calculation.
The research structured in five sections encompassing:
a. In section two is constituted by the theoretical reference on the HDI, the OSD, neural
networks and time series;
b. In section three presents the methods utilized for the calculation of the HDI;
c. The results and discussions were presented in section four;
d. Final considerations and suggestion for future research work in section five.
5. Theoretical Reference
Already other researches present new formulae of calculation of the IDH, adapting the original formula
to accept these new dimensions of variables such as Composed Dynamic Human Development Index
(CDHDI) (Bilbao-Ubillos, 2013) or question the actual formula where discuss how this can be linear
and homogeny, so there is one influence enter the variables (Liu, Wu and Huang, 2017). Figure 1
presents different perspectives for the formulation of the HDI in relation to new dimensions and types
of calculations.
Authors Methods Dimensions and variables Remarks
Bilbao- CDHDI Life expectancy, average years studying, GDP, the A new methodology to estimate
Ubillos coefficient of Gini, poverty, relative participation of HDI, without intention to
(2013) men and women in the job market and political posts, substitute the present indicator
environmental footprint, number of refugees, the rate but ofer another point of view for
of homicides. analysis.
Pereira and ELECTRE Life expectancy, level of schooling and income per Formulae weights to estimate
Mota (2014) TRI-C capita HDI with the focus in income
per capita
Eren, Celik Multiple linear Years of study, schooling, the rate of adult literation, With the focus in the scale that
and Kubat regression students per professor, proportion of seats occupied measures the level of the HDI
(2014) by women in political posts, job market and GDP. and concludes that the variables
of education are those of major
influence.
Yakut, A neural The rate of infant mortality, GDP, enrolment in the The study presented one of that
Gunduz, network schools, populational increase, foreign investment, more important variables that
Dermici ordered energy consumption, inflation, exportation, internet influence the HDI are: Expenses
(2015) logistics users, unemployment, importation, cellphone lines, with health and the number of cell
regression expenses with health. phone lines.
Ray at al. Same that the Life expectancy, level of schooling, income per Point out the utilization of
(2016) HDI capita, GDP, energy utilization. renewable energy and security.
Santos et al. SMOReg and Average years of study, life expectancy, expected The utilization of the data mining
(2017) multivariate years of schooling, health, Gross National Income techniques allows the handling of
(GNI) per capita. more information.
Liu, Wu The panel of Health and education Presents the correlation scoring
and Huang the vector of the non-linearity, heterogeneity
(2017) the correlation of time.
of error
Ramos, Linear Access of the population to electric energy, to the Environmental indicators
Silva, Bolela analysis and sanitation, emissions of CO2, the risk of pollution are associated to the human
and Andrade selection of and of air, loss of trees, Measurement of excess of development and linear
(2018) the subset of nitrogen in agriculture, protected area of terrestrial multivariate analysis.
the regression biomass and access to fresh water.
Figure 1: Survey of Different Dimensions, Variables and Methods to Calculate HDI
Source: Authors
The methods utilized to calculate the HDI mostly were basic methods as simple, logistics and
multiple regressions. These methods present problems with variables of the dimensions that do not
have correlations each other. Thus, it should not be performed the calculation of the HDI, by means
of these methods or these variables that do not present strong correlation should be withdrawn.
However, these variables can be important to determine the quality of life of the inhabitants of this
country. The research also utilized differentiated method as multivariate analysis as the ELECTRE-C
to enable identify rankings of countries of HDI, through the determination of weights pointed by the
decision maker. Also utilized in some research the method of neural networks to predict possible
HDI with more quantity of variables due to the facility that this method has to learn standards of
historical series and predict from this standard.
The research presented common variables of the calculation of the HDI as the average time of the
study, GDP, the number of jobs, life expectancy when birth. However, presented the environmental
variables in several types of research as the use of renewable energy, emissions of pollutant gases,
environmental footprint of consumption, among others. Other variables also widely used in research
were the percentile of women that participate in political posts and the relation in percentile of
participation of women in relation to the men in the job market. These variables are among the
objectives presented in OSD.
In September 2015, the General Assembly of the United Nations adopted the Objectives of
Sustainable Development (OSD) as the target of development to all nations with the principle to
be “The way for the dignity until 2030: end up with the poverty; transform all lives end protect the
planet”. This implies that all citizens of more poor countries of the world to the more richer must
have an opportunity to appropriate of the objectives and have the power to become agents of change
to perform those same (Chin, Jacobsson, 2016). Thus, Figure 2 presents the 17 OSD.
15. Protect, recover and promote the sustainable use of terrestrial ecosystems, manage with
the sustainable way the forests, combater the desertification, dissuade and reverse land
degradation and dissuade the loss of biodiversity;
16. Promote peaceful societies and inclusive for sustainable development, provide access to
justice to all and build efficacy institutions, responsible and inclusive in all levels;
17. Strengthen the means of implementation and revitalize the global partnership for
sustainable development.
Authors Salvia, Leal Filho, Brandli and Griebeler (2019) point out that the research on the
implementation of the OSD is of in accordance with the reality of each country. Whereas the African
countries stand out the OSD related to the combat the hungry, poverty, reduction of inequalities
and better the access of water and sanitation. European countries present more focus of the OSD
related to education, industry, innovation, infrastructure, consumption and sustainable production.
The climate change is highly researched in all geographic regions, justified by its global relevance,
as well as its transdisciplinary approach, that could involve the education and the infrastructure, to
questions of quality of the water, foods, agriculture and energy. Like this, the ODS is prime goals for
the country to reach the human development.net
(1)
where:
The neural networks MLP utilized to assist in research of several applications as the work of Sun
et al., (2016) that utilize the MLP to diagnose problems in the people’s breath with cancer and the
research of Mojarad et al., (2011) that present the cross-evaluation of breast cancer utilizing MLP.
Donghoun and Hwasoo (2016) that apply MLP on a device to prevent collisions among transports
and Azimi, Ghayekhloo and Ghofrani (2016) perform the forecast of schedules that happen major
solar emission and radiation by means of MLP networks. Lastly, Cabaneiros, Calautit and Hughes
(2017) use MLP to predict urban pollution. Like this, the MLP utilized to perform various forecast
mainly with contexts that can assist in the quality of life of persons in various situations.
In which represents the random conditions and is the parameters of order p and q, respectively.
According to Furriel (2011), the models heteroscedastic known for enabling the work with variances
of non-constant errors. The model ARCH responsible for capturing the evolution of the variable ²,
modeling this variation as moving average in function of the history of the time series. The ARCH
method can be represented in a generalized way by Equation 4.
(4)
Where represents the random conditions N(0,) and are the parameters. According to Samanez et al.
(2014), the Model of Reversion to the Mean (MRM) is a process that work in continuous time. Can
separated in four different forms, being its more simple form and utilized is the arithmetical model
known by the process of Ornstein-Uhlenbeck, also is popularly known as MRM Arithmetic and can
describe by Equation 5.
dX = n(X̅ – X)dt + σdz (5)
where:
The average and the variance of the process of Ornstein-Uhlenbeck can supplied from the equations
6 and 7 developed by Dixit and Pindyck (1994):
E[X] = X̅ + (X0 – X̅ ) e –nT) (6)
Var [X] = (1– e–2nT)σ2 /2n (7)
In order to be able to perform the simulation of the variables worked, necessary to utilize the equation
of discrete time to realize the discretization of the MRM, that defined by Equation 8
(8)
The parameters utilized to determine the MRM can described from the equations of the average
and the variation, defined from the formulae 9, 10 and 11. (9)
(10)
(11)
Where: (12)
Thus, this research utilizes time series to perform the forecast independent series of the HDI between
the years 2018 to 2030.
6. Methodology
The research is structured in four phases whereby in the first define the variables for forecast the
Brazilian HDI, in the second organize mapping and classifying in five dimensions. The third phase
measure the forecast of independent variables and in the fourth reaches the target forecasted of the
HDI (dependent variable). Figure 3 presents the structure of the methodology of the research.
Source: Authors.
Table 2: Presentation and Classification of the Variables of the Research
Variables OSD Index
1. Gross Domestic Product (GDP): summation of all wealth generated in the country. 1, 2 ECO
2. Price to Consumer Index (PCI): created to measure the variation of the price paid by the end consumer. 1, 2 ECO
3. Number of Enterprises (NE): number of micros, small, medium and big enterprises, reflecting how is the
8,9 ECO
confidence in the population in the undertaking.
4. Economic Freedom Index (EFI): has the aim to evaluate the degree of economic freedom in the scale of
10 ECO
0 to 100 points as focus in the living standard of the citizen and wealth generation.
5. Birth (BT): quantity of births in the country. 3 HLT
6. Mortality (MT): quantity of deaths per thousand inhabitants. 3 HLT
7. Basic sanitation (BS): % of the municipality with basic sanitation. 3,6 HLT
8. Expenses with health in relation to GDP (EH): amount allocated to the public health in relation to GDP. 3 HLT
9. Total investment in education (IED): total annual investment in the public education. 4 EDU
10. Total illiterates (TI): The number of persons of 15 years old or more illiterates 4 EDU
11. Total graduates (TG): The number of students completed the higher education. 4 EDU
12. Rate teacher-student (RTS): The ratio between the number of students to the number of teachers in
4 EDU
elementary learning (daycare, primary school, high school) to the number of teachers in service.
13. Emissions of gases of greenhouse effect (EGGE). 13 EVT
14. Deforestation of the Amazon forest (DAF): quantity of m² deforested within the Amazon forest. 15,13 EVT
15. Utilization of renewable energy (URE). 7 EVT
16. The number of fauna and flora threatened of extinction (NFFTE): number of species in the fauna and
13 EVT
flora threatened of extinction.
17. Salary M-F (SMF): the rate of monthly average income between the male salary and female salary. 5,10 GEN
18. Unemployment M-F (UMF): the rate of unemployment between men and women. 5,10 GEN
19. Homicides M - F (HMF): Rate of homicides between men and women. 5 GEN
20. Political participation M – F (PPMF): the rate of occupation in the political posts between men and
5 GEN
women.
Source: Authors
The first phase was to add to the calculation of the HDI two new dimensions in order to better classify
the OSD with variables of the research. One those is the environmental dimension (AMB) with the
purpose to measure which are the impacts that the development and social welfare effect in the
fauna and flora of the country, considering that low ecological indicators, in the span of long term,
will compromise or provides severe rupture in future HDIs. Such importance already highlighted
in the 0SD, in which, 3 off 17 objectives act directly in the preservation of the environment.
The social dimension gender (SDG) has as the focus in mapping and promote a minor inequality
between sexes, proposing opportunities, remuneration and representativeness same in no OSD 5.
Like this, Frame 2 presents the variables utilized in the research as well as its relation with the OSD
and its classification in dimensions for the estimation of the HDI consolidating the second phase.
With these 20 variables can cover 5 dimensions with different perspectives, each one bringing 4
variables, being economic dimension (PCI, GDP, NE, EFI), health dimension (BT, MT, BS, EH),
educational dimension (IED, TI, TG, RTS), environmental dimension (EGGE, DAF, URF, NFFTE)
and gender dimension (SMF, UMF, HMF, PPMF).
Brazil was the object of this research. It is the fourth largest country in the world and in territorial
extension, with the population of 190.755.799 inhabitants, with the diversity of fauna and flora being
the developing country (IBGE, 2017). Analyzed the 20 variables, with the historical series between
2000 until 2017, with the aim of predicting these same for the year 2030 deadline to achieve the goal of
the OSD. The historical series of the twenty variables had sources in the following: Brazilian Institute
of Geography and Statistics (BIGS), found the variables of the dimension of health and equality of
gender. The National Institute of Studies and Educational Research Anisio Teixeira (NISR), fond the
variables of the dimension of education. The Institute of Applied Economic Research (IAER), for
economic dimensions. The Electoral Higher Tribunal (EHT), only for variable PPMF.
The 20 variables predicted by means of time series method, separately from the methods of MA,
ARMA, ARCH and MRM. The viable methods selected according to the criteria of the Test of
the Reason of the Criterion of Information of Akaike (AIC) (Kamel, Shaqlaih and Ibrahim, 2015).
From the forecast of the time series of the twenty variables was performed the forecast of the
calculation of the Brazilian HDI for the years 2018 until 2030 by means of neural networks MLF.
The input of the neural networks were the variables classified in five dimensions and the output was
the HDI of the time series proposed as shown in Figure 3.
Source: Authors
Lastly, the calculation of errors of the forecast of the HDI by neural networks identified the
efficiency of the method of forecast utilized. The errors utilized were Absolute Average Percentile
Error (AAPE) and the Absolute Average Deviation (AAD), that represents the same forecast
that the AAPE, however, in the same units that of data as illustrated in Equations 12 and 13
(Ghinea et al., 2016).
(12)
(13)
where:
yt: true value;
ŷt: adjusted value;
n: number of forecasts.
Thus, the question is, by the means of time series method perform the forecast of independent
variables of the Brazilian HDI according to the aim of this article.
7. Results
To achieve the objective of proposal of forecast method of the HDI by means of neural networks
considering 5 dimensions composed by the variables built from the objectives of sustainable
development (OSD). Table 3 presents twenty variables that submitted to six methods of forecast of
time series selected as the best method of forecast according to smaller AIC.
Table 3: Models of Forecast Utilized in the Time Series
Variables AIC Variable methods
Gross Domestic Product (GDP) 459.3788 ARMA
Price for Consumers Index (PCI) -84.5109 MA
Number of enterprises (NE) 470.5808 MMR
Economic Freedom Index (EFI) 131.0701 ARCH
Basic Sanitation (BS) 51.0367 MA
Births (BT) 37.8343 MA
Deaths (DT) 73.2676 MA
Expenses with health in relation to the GDP (EH) 1.0360 MA
Total Investment in Education (TIE) 133.0304 MA
Total Illiterates (TI) 451.9182 MMR
Total Graduates (TG) 397.1665 MMR
Ratio teacher-student (RTS) 49.2480 MA
Number of fauna and flora threatened of extinction (NFFTE) 691.4248 MMR
Utilization of Renewable Energy (URE) 337.2866 MMR
Emissions of gases of greenhouse effect (EGGE) 338.2268 MMR
Deforestation of the Amazon forest (DAF) 287.5288 MMR
Salary M-F (SMF) -37.0967 MA
Unemployment M-F (UMF) -52.0006 MA
Homicides M– F (HMF) 9.9056 MA
Political Participation M – F (PPMF) 12.3083 MA
Source: Authors
The forecast of the independents variables of the HDI until the year 2030 presented where eleven
of the variables (PCI, BS, BT, DT, EH, EFI, RTS, SMF, UMF, HMF, PPMF) predicted by the
method of MA, because they did not present great variations in its time series. These variables were
all of the dimensions of gender and of health. Seven variables (NE, TI, TG, NFFTE, URE, EGGE
and DAF) predicted by the model MMR. All the variables of the environmental dimension were
predicted by this method because presented few variations, but, present some decreasing tendency
mainly the EGGE and the DAF indicating actions of the country regarding the improvement of the
environmental dimension, mainly in policies of incentive towards the emission of gases. Another
positive factor is that two educational dimensions presented positive indexes TI decrease over the
years and the TG increased.
Table 4: Forecast of the variables
Source: Authors
Economic Dimension Health Dimension
Year GDP ($) PCI NE EFI BT MT BS EH
2018 6414644 0.0680 5536309 572.62 14.5321 7.7442 72.0488 8.6131
2019 6426213 0.0877 4444709 63.155 16.1638 5.8548 70.4626 8.2610
2020 6655262 0.0980 3707422 41.295 16.6225 6.1165 68.0839 8.1164
2021 6938546 0.0453 4122818 53.198 15.7834 7.7923 69.4379 8.3138
2022 6988464 0.0593 4378470 58.989 15.7985 7.5629 72.2014 8.1579
2023 7126070 0.0774 4766694 53.494 17.6190 7.3173 72.7356 7.9057
2024 7366943 0.0820 5000790 52.776 18.2891 8.3121 73.3137 8.1279
2025 7286360 0.0667 4754761 64.320 17.6953 6.5311 69.5447 8.2487
2026 7401022 0.0484 4621819 76.110 18.3756 7.6756 65.0091 8.3233
2027 7724836 0.0706 4035657 95.737 18.0988 8.2199 67.9185 8.3578
2028 8009445 0.0619 4426283 50.604 18.0993 6.8767 71.1669 8.2572
2029 8293665 0.0789 4559574 64.136 17.4184 6.5451 70.4955 8.5827
2030 8553729 0.0615 3706800 55.886 15.2581 4.9083 71.8780 8.7851
Educational Dimension Environmental Dimension
Year IED TI TG RTS EGGE DAF URE NFFTE
2018 153.2402 13063310 906835,2 20.130 2655542696 22814.30 126223.9 5845.927
2019 168.7209 13052523 895381,3 21.377 2577648983 15455.62 137076.3 6361.389
2020 185.2608 12782017 969499 19.080 3117055640 17529.32 140700.4 4409.147
2021 186.0365 12843069 967801 18.392 3570764711 16075.82 143976.7 3165.759
2022 197.2407 12750940 1004532 19.272 3402253904 13387.20 133420.2 2758.061
2023 204.7159 12721164 1049940 18.963 3137068702 16766.79 142036.0 3649.248
2024 212.2239 12372277 1058424 20.055 3114211460 21641.32 140506.3 2947.826
2025 212.6734 12128115 1133588 20,669 3287671563 20028.15 135990.9 2716.105
2026 206.3789 11933117 1179896 19.814 3172210775 15211.17 134126.2 2722.875
2027 211.7345 11656224 1191280 20.736 2716299248 19700.15 134529.2 2233.245
2028 206.3698 11606302 1253346 19.798 2539318319 5816.485 139597.9 728.1869
2029 206.8723 11521516 1228634 20.610 1899233194 10711.19 144076.3 1768.619
2030 200.9626 11322535 1285669 21.071 1805450198 6375.089 143737.8 3109.676
Gender Dimension Forecast by Neural Networks
Year SMF UMF HMF PPMF Human Development Index (HDI)
2018 1.5809 0.7953 11.5408 7.1059 0.7342
2019 1.4959 0.7928 11.4860 7.1071 0.7417
2020 1.4586 0.8456 11.4285 7.6916 0.7422
2021 1.4918 0.8010 11.6438 7.8522 0.7420
2022 1.4949 0.7409 11.1129 7.5549 0.7420
2023 1.3940 0.7843 10.5838 7.7500 0.7493
2024 1.2617 0.7149 11.4457 7.0312 0.7479
2025 1.3563 0.7325 12.2958 6.4344 0.7416
2026 1.5342 0.7601 11.7667 6.6399 0.7330
2027 1.5387 0.7594 11.1490 7.1859 0.7330
2028 1.5955 0.7717 10.7309 7.8754 0.7258
2029 1.5516 0.7469 10.3945 7.6814 0.7336
2030 1.4205 0.7546 10.8643 7.2104 0.7258
Lastly, two economic variables were predicted by the methods ARMA the GDP and by the ARCH
the variable EFI. These variables that present major seasonal and are two variables of the economic
dimensions of the developing country. Table 4 illustrates the data predicted for independent series
and the forecast of the independent HDI by the neural networks MLP.
The forecast of the HDI by the neural network MFL besides Table 4, is presented in the Figure 4.
Presents the decrease of 0.02 points from the first year of the forecast. This, according to the forecast
will get the maximum HDI in the year 2023, however it will not the HDI more recent of this research
of the year 2017.
Source: Authors
The forecast of the Brazilian HDI presented the average error AAPE of 4.97 and the AAD of 0.0112.
These present the quality of the forecast even with twenty variables in the neural networks and it is
with seventeen inputs and twelve outputs. The Brazilian HDI was obtaining small increase until the
year 2017. However, with the forecast of new methodology utilizing two new dimensions of gender
and environment the independent series and the utilization of new variables predicted to the year
2030 not presented growth and as consequence the HDI also not. In reality, presented a decline in
over the years. This fact shows that besides the deficiencies in three dimensions already estimated by
the HDI normally the country also presents difficulties in the two new dimensions.
However, to have an increase of the value of the HDI the Brazilian government can execute
actions to the dimension health decreasing the MT and the BS and increasing the EH and in the
dimension gender decrease the variables SMF, UMF and HMF and increase the dimension PPMF.
These two dimensions were those that presented minors transformations over the years surveyed.
In the environmental dimension, the country needs to increase URE and decrease the NFFTE.
In the educational dimension is necessary to decrease the RTS and lastly, to perform all these
changes the economic dimension needs structuring in the increase of variables GDP and NE, mainly
present incentives for the creation of new enterprise within the country.
8. Conclusion
The research achieved its objective to predict the HDI by means of neural networks, however in
its forecast measured with more two dimensions of gender and environment. Conclude that these
are important to the quality of life of the inhabitants of the nation. The environment dimension is
indispensable to point that the economic dimension without the care with the environment in long-term
generates problems in the quality of life of the persons. The nation without equality of gender does not
present equalitarian rights to all its inhabitants and as consequence does not have human development.
These prove the importance of having as the basis of calculation of the HDI and the OSD.
With the inclusion of the two dimensions with more four variables each one, besides the three
dimensions already existed and mapped according to the OSD presented the bigger complexity to
perform the forecast of the HDI. Thus, the method of the forecast to be performed, by the neural
networks was ideal to try to imitate the standards found in the twenty variables and predict the HDI
with minor errors, mainly the AAD of 0.0112.
The advantage of the method proposed is that does not point only the dimension that present
problem but the variable that needs to be transformed. For example, the environmental dimension
presented actions of improvements however the variables of URE and NFFTE needs more efficient
government actions to achieve the development of this new dimension.
As limitation and suggestions for future research will be to add as dimensions to forecast the HDI the
OSD that were not considered in this research. This was the objectives: 11 become cities and more
sustainable communities; 12 responsibility of consumption and production; 14–Life under the water;
16–Peace and justice; and 17–partnerships and goals. Finally, the proposed method to forecast the
HDI was the way to help government actions of countries that search the human development index
from the sustainable development.
References
Azimi, R., Ghayekhloo, M. and Ghofrani, M. (2016) A hybrid method based on a new clustering technique and multilayer
perceptron neural networks for hourly solar radiation forecasting. Energy Conversion and Management, 118
(12), 331-344.
Bilbao-Ubillos. (2013) Another Approach to Measuring Human Development: The Composite Dynamic Human
Development Index. Social Indicators Research, 111(2), 473-484.
Caiado, R.G.G., et al. (2018) A literature-based review on potentials and constraints in the implementation of the
sustainable development goals. Journal of Cleaner Production, 198, 1276-1288.
Chin, A. and Jacobsson, T. (2016) The Goals.org: mobile global education on the Sustainable Development Goals.
Journal of Cleaner Production, 123, 227-229.
Diggle, P. (1990). Time Series: A Biostatistical Introduction. Oxford University Press: New York.
Dixit, A. and Pindyck, R. (1994) Investment under uncertainty. New Jersey: Princeton University Press.
Donghoun, L. and Hwasoo, H. (2016) Real-Time Rear-End Collision-Warning System Using a Multilayer Perceptron
Neural Network. IEEE Transactions on Intelligent Transportation Systems, 17, 3087-3097.
Furriel, A.M.Q.S. (2011) Heteroscedastics Models – ARCH e GARCH. Unpublished doctoral dissertation, School of
Economics of the University of Porto. (in Portuguese).
Gao, M., Yin, L. and Ning, J. (2018) Artificial neural network model for ozone concentration estimation and Monte
Carlo analysis. Atmospheric Environment, 184, 129-139.
Ghinea, C., et al. (2016) Forecasting municipal solid waste generation using prognostic tools and regression analysis.
Journal of Environmental Management, 182, 80-93.
Haq, M. ul. (1995) Human Development Report 1990. New York, Oxford, Oxford University Press.
Haykin, S. (2008) Neural Networks and Learning Machines. Ontario, Canada. 3rd edition: Prentice Hall.
IBGE. (2018) Gross birth rate per thousand inhabitants–Brazil–2000 to 2015. Retrieved on < https://brasilemsintese.
ibge.gov.br/populacao/taxas-brutas-de-natalidade.html>. Access in: April 08, 2018. (in Portuguese).
INEP. (2018) Statistical Synopsis of the Higher Education–Undergraduate. Retrieved on <http://portal.inep.gov.br/
sinopses-estatisticas-da-educacao-superior>. Access in: April 08, 2018. (in Portuguese).
IPEA. Brazil–Gross Domestic Product (GDP): the concept of parity of the purchasing power (CPP) per capita. Retrieved
on <http://www.ipeadata.gov.br/Default.aspx>. Access in: April 08, 2018. (in Portuguese).
Kamel, A., Shaqlaih, A. and Ibrahim, E., (2015) Model inference using the Akaike information criterion for turbulent
flow of non-Newtonian crude oils in pipelines. Petroleum Science. 12(3), 492-500.
Liu, S.Y., Wu, P.C. and Huang, T.Y. (2017) Nonlinear Causality between Education and Health: the Role of Human
Development Index. Applied Research Quality Life. 12(3). 761-777.
Mojarad, S., Dlay, S., Woo, W. and Sherbet, G.M. (2011) Cross-Validation Evaluation for Breast Cancer Prediction
Using Multilayer Perceptron Neural Networks. American Journal of Engineering and Applied Sciences, 4,
576-585.
Monteiro, R.L.C., Pereira, V. and Costa, H.G. (2018) A Multicriteria Approach to the Human Development Index
Classification. Social Research Indicators. v. 14(6), p. 417-438. (in Potuguese).
Pereira, D.V. and Mota, C.M.M. (2014) Human Development Index Based on ELECTRE TRI-C Multicriteria Method:
An Application in the City of Recife. Social Indicators Research. 125, 19–45. (in Portuguese).
Ramos S.B., Siva, J.P., Bolela, C.A. and Andrade, M. (2018) Prediction of Human Development from Environmental
Indicators. Social Indicators Research. v. 138, 467-477. (in Portuguese).
Rocha, F.G. (2003) Contribution of models of time series to forecast the collection of ISS. Master’s Dissertation,
Department of Economy, (in Portuguese).
Roitman, V.L. (2001) Computational model of neural networks to predict the open unemployment index. Doctoral
Thesis – Federal University of the Rio de Janeiro. (in Portuguese).
Salvia, A.L., Leal Filho, L., Brandli, L.L. and Griebele, J.L. (2019) Assessing research trends related to Sustainable
Development Goals: local and global issues. Journal of Cleaner Production 218, 1276-1288.
Samenez, C.P., Ferreira, L.R. and Nascimento, C.C. (2014) Evaluation of the option of change of fuel in the Brazilian
flex: study by geographical region using the theory of real options and stochastic simulation. Gestao &
Producao, 24(3), 628–643. (in Portuguese).
Santos, C.B., Pedroso, B., Guimarães, A.M., Carvalho, D.R. and Pilatti, L.A. (2017) Forecasting of Human Development
Index of Latin American Countries Through Data Mining Techniques. IEEE Latin American Transactions,
15, 1-6. (in Portuguese).
Sun, W. et al. (2016) Respiratory Signal Prediction Based on Adaptive Boosting and Multilayer Perceptron Neural
Network. International Journal of Radiation Oncology, 962, 702-702.
UNDP. (2018) United Nations Development Program. Retrieved on <https://nacoesunidas.org/agencia/pnud/>. Access
in: 12/10/2018. (in Portuguese).
Willems, J. (2015) Individual perceptions on the participant and societal functionality of non-formal education for youth:
Explaining differences across countries based on the human development index. International Journal of
Educational Development. 44, 11-20.
Yakut, E., Gunduz, M. and Demirci, A. (2015) Comparison of classification success of human development index
by using ordered logistic regression analysis and artificial neural network methods. Journal of Applied
Quantitative. 10(3), 15-34.