Documente Academic
Documente Profesional
Documente Cultură
Truly universal
h
roven wit
ally p
Clinic
Multilink N
®
Versatile application
Due to the fast and efficient self-curing mechanism, Multilink N is highly recommended in
cases where cementation with light-activated materials is not possible as a result of restricted
or hampered access to light (e.g. oxide ceramics, opaque glass-ceramics or alloys).
The universal cleaning paste Ivoclean Excellent adhesion between the luting com-
effectively cleans the bonding surfaces posite and the restoration is achieved with
of prosthetic restorations after intraoral the new bonding agent Monobond N. Only
try-in and thus creates optimum pre- one primer is necessary to establish a long-
requisites for the adhesive luting lasting bond to all-ceramic, metal, metal-
procedure. ceramic and composite resin restorations.
Clean the restoration with Ivoclean. Thoroughly rinse with water spray and dry Prime the bonding surface of the restoration
with oil-free air. with Monobond N.
Allow the material to react for 60 seconds. Disperse any remaining excess with a strong Apply Multilink N and seat the restoration.
stream of air.
Multilink N
®
Quarter Technique
Depending on the curing light used, excess can
be light-activated in 1 to 3 seconds per quarter
surface (mesio-oral, disto-oral, mesio-buccal,
disto-buccal).
Radiopacity % Al
High radiopacity
400
Radiopacity facilitates oral diagnosis and
350
differential diagnosis of secondary caries
300
and marginal gaps. Only composite
200 160 materials having a radiopacity of at
110
100 least 200% Al can be reliably distin-
0 guished from the tooth structure.
Multilink N RelyX U200* Panavia F2.0*
Source: R&D Ivoclar Vivadent AG, Schaan,
Liechtenstein, 2012
*RelyX U200 and Panavia F2.0 are not registered trademarks of Ivoclar Vivadent.
Well-known voices
Multilink N is endorsed by distinguished professionals
Multilink® N forms a part of the “Fixed Prosthetics” product category. The products of this category cover the procedure
involved in the fabrication of fixed prosthetic restorations – from temporization to restoration care. The products are
optimally coordinated with each other and enable successful processing and application.
Programat ®
IPS e.max System ®
Press and ceramic furnaces for demanding all ceramic – all you need
requirements
Would you like to know more about the products of the “Fixed Prosthetics” category? Simply get in touch
with your contact person at Ivoclar Vivadent or visit www.ivoclarvivadent.com for more information.
Descriptions and data constitute no warranty of attributes
Printed in Germany © Ivoclar Vivadent AG
Ivoclar Vivadent AG
Bendererstr. 2
667196/e/2014-02-04
9494 Schaan
Liechtenstein
Tel. +423 235 35 35
Fax +423 235 33 60
www.ivoclarvivadent.com