Documente Academic
Documente Profesional
Documente Cultură
RheolabQC
RheolabQC
The Powerful QC Instrument
Measuring method
Manual operation
RheolabQC can be operated either via the robust keypad or
via an external keyboard which is connected to the PS/2
interface. There is an illuminated, easy-to-read display for
selecting the measuring parameters and showing the
relevant properties. The internal memory has storage
capacity for over 100 predefined measuring profiles and over
50 000 measuring points in more than 100 measurement
series. The data can be read out by a software program
immediately, stored for reading out later, or sent to a
connected printer.
Software
The reliable rheometer software from Anton Paar is available
for operating the instrument from a computer. RheolabQC
can be connected via the conventional RS232 interface or
via a LAN-Ethernet interface directly to the company or
laboratory network. It is then controlled using the software.
There are numerous analysis models and automation
routines available, including a special quality control module.
Modules for well-known LIM systems and conformity with
21 CFR Part 11 are standard.
Specifications
Speed 0.01 to 1200***) 1/min
Torque 0.20 to 75 mNm
Shear stress*) 0.5 to 30000 Pa
Shear rate*) 10-2 to 4000 1/s
Viscosity measuring range*) 1 to 109 mPas
Temperature range**) -20 to 180 °C
Internal angle resolution 2 µrad
LAN-Ethernet interface PC
Serial interface RS232 PC, printer
PS/2 interface Keyboard, bar code
reader
Dimensions W x H x D 300 x 720 x 350 mm
Weight 14 kg
Properties which can be
measured or analyzed
Dynamic viscosity η
.
Shear rate γ
Shear stress τ
Speed n
Torque M
Temperature T
Time t
Kinematic viscosity ν
Yield point τo
Deformation γ
Compliance J