Documente Academic
Documente Profesional
Documente Cultură
DATE : 2012/08/29
PAGE : 1
Proposal of energy efficiency directive as broken down by article with relevant standards
or needs for standards
SFEM members are invited to prepare contributions in order to fill in the column on standardization
and the one on needs.
Articles from the proposal of directive on Standards/ drafts Standardization needs/ potential
energy efficiency new standards
Article 1 – Subject matter and scope None None
Article 2 - Definitions CEN/CLC TR 16103 (2010) Energy To check if there are differences
management and energy efficiency – between terms and definitions used in
glossary the proposal of directive and the ones
Pr ISO/IEC 13 273-1 Common terminology in standards
- Energy efficiency
Pr ISO/IEC 13273-2 Common terminology
- Renewable energy
PR ISO 17742 General calculation
methods on energy efficiency and savings
for countries, regions or cities
Article 3 – Energy efficiency targets EN 16212 (2012) Energy efficiency and Calculation method for global cost of
Each Member State[…] shall set an indicative savings calculations – bottom up and top energy efficiency investment
national energy efficiency target, based on either down methods
primary or final energy consumption, primary Pr ISO 17741 General technical rules for
or final energy savings, or energy intensity. In measurement, calculation and verification
notifying these targets to the Commission in of energy savings of projects
accordance with Article 19(1) and Annex XIV Pr ISO 17742 General calculation methods
Part 1f), the Member States shall also express on energy efficiency and savings for
them in terms of an absolute level of primary countries, regions or cities
energy consumption and final energy Pr ISO 17743 Definition of a
consumption in 2020 and shall explain how, methodological framework applicable to
and on the basis of which data, this has been calculation and reporting on energy
calculated….. savings
Article 7 – Energy audits and energy management EN 16247-1 (2012) Energy audits –
systems General requirements
Pr EN 16247 -2 to 5 Energy audits –
- Part 2 industry,
- Part 3 buildings,
- Part 4 transport
- Part 5 qualification of energy auditors
EN ISO 50001 Energy management
systems
Pr ISO 50002 Energy audit
Pr ISO 50003 Energy management
systems audit
Pr ISO 50004 Guidance for
implementation, maintenance and
improvement of an EnMS
Pr ISO 17578 Energy performance
indicators
Pr ISO 17570 Energy baselines general
principles
Pr ISO 17580 Monitoring, measurement,
analysis and verification of organizational
energy performance