Documente Academic
Documente Profesional
Documente Cultură
SC Sensor
Data Sheet
Product Overview
Infrared Sensor (IR.06-EM.SC) .06(1,5) O.D. 0.725 x 18 T.P.I. REF.
(Din Pg 11 Threads)
The IR.06-EM.SC sensor has been specifically designed to 1.28 (32,5)
provide 24x7 Thermal Monitoring of mission critical electrical .25(6,4)
equipment via monitoring an increase in heat, utilising new
‘best practice’ infrared technology. The IR.06-EM.SC is a
patented, small, plastic housed, non-contact IR sensor which
requires no external power and has lifetime calibration. In
Black ABS
addition, the IR.06-EM.SC sensor provides a ΔT (rise over .550(14,0)
Plastic
ambient) reading; this eliminates variances in panel to panel,
or site to site comparison, and is the internationally accepted .497(12,6) dia.
method of temperature measurement for electrical equipment.
The IR.06-EM.SC is unique as it can be installed INSIDE electrical IR.06-EM.SC sensor has a single calibration and can be used for
panels (sensors are utilised to monitor key busbar terminations), different busbar sizes/mounting distances. Please see IR Sensor
where they detect and identify the exact location of the Gain Matrix for the gain factor to be used when configuring the
problem long before the failure. Sensors are CE approved/ Exertherm® Modbus Datacard.
UL Recognized, are hermetically sealed to IP67 & qualify as
intrinsically safe apparatus (NEMA 4X).
Features
• Small
• Non-conductive ABS plastic
• Measures Delta ΔT
• Infrared non-contact
• Patent protected
• Continuous 24x7 Thermal Monitoring
• Self-Powered
• Lifetime calibration
• 2 Year warranty
• Can install INSIDE electrical enclosures
• Detects faults BEFORE they fail
• Easy integration to BMS/SCADA
via Exertherm® Modbus Datacard
• CE & UL Recognized 61010-1
Specification
Product: Exertherm Non-contact infrared Operating temp range: 0-70°C
temperature sensor (IR.06-EM.SC)
Response time: 40 ms
Model: Provides mV output signal.
Resolution: 0.0001°C
Temp rise over ambient (ΔT)
Spectral response: 5.5 > 20 microns
Specification: 0 > 300°C
Housing: ABS plastic threaded
Sensing range: Full range via Exertherm Datacard
Sealing: Hermetically sealed (IP67)/NEMA 4X Rating
Linear range selection: Full range via Exertherm Datacard
Output cable (6mtr): Twisted shielded pair Belden 9451
Power requirements: None
Storage Temp: -20 to 70°C (-4 to 158°F)
Accuracy: +/-5% at ΔT 40°C
Cable Rating: 300V / 75°C (167°F)
Repeatability: 1°C (2°F)
Product Overview
The Exertherm IR Sensor Brackets have been designed with ultimate
flexibility in mind. They are manufactured in white UL94-HB rated
plastic and utilise similar non-metallic fittings to suit high voltage
environments.