Documente Academic
Documente Profesional
Documente Cultură
MY PROFILE Solution Report For Full Syllabus Test4
Represent whole test solution with correct and incorrect answers.
REPORTS
View Your Test Analysis
BUY PACKAGE
NEWS
Total no. of students 4492 Marks 50.05 Correct Questions 38 Incorrect Questions 17
Ask an Expert
Total Marks in Test 100 Percentile 74.89 Marks Scored 55 Negative Marks 4.95
Q. No Question Status
Q.1 Which of the following options is the closest to the meaning of the word PLAUSIBLE?
a. Credible
b. Unlikely
c. Impossible
d. Victim
Q.2 How many 3digit numbers can be formed from the digits 2, 3, 5, 6, 7 and 9, which are divisible by 5 and none of the digits
is repeated?
a. 5
b. 10
c. 15
d. 20
Q.3 Choose the most appropriate word from the options given below to complete the sentence:
Information Technology, not geared _____ universal education, would be a selfcontained contradiction.
a. at
b. from
c. towards
d. when
Q.4 Choose the most appropriate pair of words from the options given below:
The _____ scriptures remained _____ to those belonging to the sect.
a. encrypted ..... exclusive
b. decoded ..... esoteric
c. instinct ..... propensities
d. biggest ..... ages
Q.5
The remainder when 1025 – 7 is divided by 3 is _____
Q.6
Rajat and Ramesh have 97 shirts between them. They sell at different prices but get the same amount. If Rajat sells at
Ramesh’s price and Ramesh sells at Rajat’s price, they get 5625 and 484 respectively. How many shirts does Rajat
have?
a. 22
b. 75
c. 36
d. 61
Q.7 Samuel is obviously a bad fisherman. During the past season, in which he and the five members of his team spent four
months on a boat together off Dutch Harbor, he caught fewer fish than any of his teammates. Which of the following, if true
most weakens the argument above?
a. Two seasons ago, Samuel fished on another boat off Dutch Harbor and caught more fish than any other member of that boat.
b. Before becoming a fisherman, Samuel piloted a fishing boat whose members regularly caught record numbers of fish.
c. While fishing the past season, Samuel fell sick for a weak and did not catch any fish during that time.
d. Unlike the other fisherman on his boat, at the order of the captain, Samuel fished the past season with experimental bait.
Q.8 In the final analysis, the wealth of a country is based upon its power to develop and to effectively utilise the innate
capacities of its people. It takes skilled human agents to discover and exploit natural resources, to mobilise capital, to
develop technology, to produce goods, and to carry out trade. Indeed, if a country is unable to develop its human
resources, it can not build anything else whether it be a modern political system, a sense of national unity, or a prosperous
economy.
This paragraph best supports the statement that
a. the wealth of a country resides in several types of resources.
b. natural resources play a vital role in human development.
c. human resources constitute the ultimate basis for the wealth of nations.
d. capital and natural resources are active factors of production.
Q.9
Let p and q be roots of the quadratic equation x2 – (α – 2)x – α – 1 = 0 then minimum possible value of p2 + q2 is
a. 0
b. 3
c. 4
d. 5
Q.10 Three identical inlet pipes were opened at 10:00 AM to fill up an empty container. At 12:30 PM, 2 identical pipes (having
different rate from existing pipe’s rate) are also opened. At 1:30 PM, it still required 1 more hour for all these pipes to fill up
the remaining 15 m3 of water. If each of the 2 pipes which were added at 12:30 PM can individually fill up the empty
container in 40 hours, then the capacity of the container is ____________ m3 .
Q.11 Which one of the following pairs is not correctly matched ?
a. Energy equation : Flow through a venturimeter
b. Flow net : Flow through porous media
c. Free vortex: Flow of water in a basin
d. Cavitation : Pressume wave created in pipe due is sudden closure of value
Q.12 Air flows steadily through an air compressor at the rate of 1 kg/s. The inlet and exit conditions are shown in the figure
below:
If the ratio of inlet pipe diameter to outlet pipe diameter is 2, then the ratio of velocity at inlet to the velocity at outlet is
a. 2
b. 0.8
c. 1.25
d. 5
Q.13 A block of mass 1 kg is placed on a rough surface. The ratio of the coefficient of static friction to that of kinetic friction is
1.25. If a force of 6 N gives an acceleration of 2 m/s2 , the limiting force of friction is (Take g = 10 m/s2 )
a. 4 N
b. 5 N
c. 2 N
d. 10 N
Q.14 In Oxyacetylene welding, the temperature of the inner of the flame is near to
a. 3500°C
b. 3200°C
c. 2900°C
d. 2550°C
Q.15 Two refrigeration cycles are coupled, as shown in the Ts diagram below.
The enthalpies at state points are:
Neglecting any loses, the ratio of mass flow rate of refrigerant through cycle 1 to that through cycle 2 is
a. 0.22
b. 0.5
c. 4.5
d. 2
Q.16 A specimen of steel of dia 20 mm and length 200 mm is tested for destruction. It has an extension of 0.25 mm under 80
kN. The Young's modulus of elasticity (in N/mm2 ) will be nearly
a. 51
b. 102
c. 204
d. 3.5
Q.17 Two particles A and B start at origin and travel in opposite directions along a circular path of radius 10 m at constant
speeds. The time when they collide is 10π sec and the acceleration of B just before collision is 0.4 m/s2 . What is the ratio
of velocity of particle A to velocity of particle B?
a. 1
b. 4
c. 2
d. 0
Q.18 What is the natural frequency (in Hz) of the springmass system shown below ?
k1 = k2 = 1500 Nm, k3 = 2000 N/m, m = 5 kg
a. 5.03
b. 4.02
c. 3.01
d. 2.0
Q.19 The two shaft AB and BC of equal length and diameter d and 2d are made of same material and are subjected to a twisting
moment T at the point B. If TA and TC represent the twisting moments developed at ends A and C, then
a.
b.
c.
d.
Q.20 A bar shown below is subjected to a load P as shown. The points of maximum stress are:
a. II and IV
b. I and II
c. I and III
d. I, II, III and IV
Q.21 If two tensile stresses act on a bolt in perpendicular direction along with a shear stress, what will be the maximum value of
shear stress for the following values.
a. 50.25 MPa
b. 50.50 MPa
c. 5.0 MPa
d. 50 MPa
Q.22 The velocity profile of turbulent flow in the pipe is
a.
b.
c.
d.
Q.23 A centrifugal air compressor delivers 20 kg/s of air consuming 5090 kW of power. The speed of the compressor is 10000
rpm. Slip factor is 0.9 and the power input factor is 1.05. The diameter of the impeller is __________ cm.
Q.24
is equal to
a. 0
b. ∞
c. 1
d. –1
Q.25 The product of time matrices A and adj(A) is
a. a zero matrix
b. a unit matrix
c. a scalar matrix
d. matrix A itself
Q.26 The temperature profile at a particular location in a thermal boundary layer on a plate at a temperature of 60°C exposed to
ambient at 20°C is prescribed by the relation t (y) = 50 – 10y + y 2
The thermal conductivity of plate material is 20 W/mK. The heat transfer coefficient is ________ W/m2 K.
Q.27 The difference in pressure between points A and B for the following figure is ___________ kPa.
If each day’s demand is independent of the previous day’s, the number of papers to be ordered each day is ________.
Q.29 The production of ‘A’ depends on B, C, D and E as shown in the structure below:
The inventory in hand for A, C and E are 50 units, 10 units, 20 units respectively. The scheduled receipt
for D and E are 10 units, and 40 units respectively.
For producing 100 units of A, the order size of E should be of _________ units.
Q.30 The force requirement in a blanking operation of low carbon steel sheet is 5.0 kN. The thickness of the sheet is t and
diameter of the blanked part is d . For the same work material, if the diameter of the blanked part is increased to 1.5d and
the thickness is reduced to 0.4t, the new blanking force is __________ kN.
Q.31 In open die forging a disc of diameter 200 mm and height 60 mm is compressed without any barreling effect. The final
diameter of the disc is 400 mm. The true strain is __________compressive.
Q.32 A single point cutting tool with 12° rake angle is used to machine a steel workpiece. The depth of cut is 0.81 mm. The chip
thickness under orthogonal machining is 1.8 mm. The shear angle in degrees is _________.
Q.33 The temperature of a steel ring is raised by 150°C in order to fit on a wooden wheel of 1.2 m diameter, then the original
diameter of the ring is _____________mm. (α = 12 × 10–6 /°C)
Q.34 The value of λ, such that the vector has zero divergence is
__________.
Q.35 In the inversion of raw sugar, the time rate change varies as the amount of raw sugar remaining. After 10 hours, 8000 kg
of sugar has been reduced to 800 kg. After 40 hours, the amount of sugar will reduced to ____________ kg.
Q.36 Flow of an Ideal gas through a duct: the ratio of outlet diameter to inlet diameter is 0.83. Conditions of inlet is 150°C and 10
bar. The outlet pressure is 3.5 bar. Find out the outlet temp if the outlet velocity is 2.5 times the inlet velocity. Assume per
kg flow to be adiabatic. Specific heat ratio = 1.4, has constant R = 0.287 kJ/kgK.
a. 313.38 K
b. 111.128 K
c. 255 K
d. 2.55 K
Q.37 In a gating system, the ratio 1 : 2 : 4 represents:
a. Sprue base area : runner area : ingate area
b. Pouring basin area : ingate area : runner area
c. Sprue base area : ingate area : casting area
d. Runner area : ingate area : casting area
Q.38 Which of the following represent the exit velocity triangles of a Francis turbine having radial exit?
a.
b.
c.
d.
Q.39 Which of the following reversed loading, having the same value of mean and variable stress, will be most severe for the
machine component:
a.
b.
c.
d. all of the above
Q.40 What is the support reaction (in kN) at B for the beam loaded shown as below?
a. 55.66
b. 60.67
c. 90.77
d. 180
Q.41 Maximum bending moment in the beam as per loading diagram shown below will be
a. w(l – a)
b. w(a + l)
c. wl
d. wa
Q.42 Offset in radial cam is provided for
a. decreasing pressure angle during upward movement of follower
b. decreasing pressure angle during downward movement of follower
c. increasing pressure angle during upward movement of follower
d. increasing pressure angle during downward movement of follower
Q.43 A vertical double acting steam engine develops 75 kW at 250 rpm. The max. fluctuation of energy is 30% of the work done
per stroke. The max and min. speeds do not vary more than 1% on either side of the mean speed. Mass of flywheel (in kg),
if its radius of gyration is 0.6 m will be
a. 472
b. 520
c. 547
d. 659
Q.44 A journal bearing of a centrifugal pump has the following data:
Load on bearing = 20 kN, speed of journal = 900 rpm, viscosity of oil = 0.017 kg/ms. If the diameter of
the bearing is 100 mm and its length is 1.6 times the diameter,the bearing modulus is:
a. 0.105 × 10–6
b. 0.656 × 10–6
c. 0.204 × 10–6
d. 0.135 × 10–6
Q.45 A truss PQRS is roller supported at P and hinged at R and carries a vertical load of 7 kN at S as shown in figure. What is
the magnitude of force in member PQ ?
a. 5.25 kN
b. 3.35 kN
c. 4.15 kN
d. 5 kN
Q.46 The rotor of a turbine of a yacht makes 1200 rpm clockwise when viewed from the stream. The rotor has mass 750 kg and
radius of gyration 250 mm. The gyroscopic couple (in kNm) transferred to the hull when the yacht pitches at angular
velocity of 1 rad/s is
a. 2.50
b. 3.49
c. 4.89
d. 5.88
Q.47 Circular pipe of external and internal diameter 60 mm and 44 mm is used as a simply supported beam over an effective
span of 2 m. If permissible stress in steel is 150 N/mm2 , What is the maximum concentrated load (in kN) that can be
carried by it at the midspan ?
a. 4.52
b. 2.64
c. 3.32
d. 5.56
Q.48 Which of the following figures correctly represent the variation of bending stress and shear stress (respectively) in a
simply loaded Isection beam?
a.
b.
c.
d.
Q.49
A rigid vessel of volume 1.2 m3 contains 2 kg of steam at a pressure of 2 bar. The steam is heated to raise its pressure to
2.5 bar. The internal energy at the end of the process (in kJ/kg) is Use the following table:
a. 1664
b. 1814
c. 2014
d. 1764
Q.50 The system of equations
Consists of
a. a unique solution
b. no solution
c. an infinite number of solutions
d. none of these
Q.51 Consider the differential equation
The particular integral solution of the equation is
a.
b.
c.
d.
Q.52 Air at 25°C flows past a flat plate of width 1 m at 5 m/s velocity. The plate is heated over its entire length to a uniform
temperature of 75°C. The drag force (on one side) exerted on the first 50 cm length of the plate is ____________ × 10–3 N.
The thermophysical properties of air are
Q.53
Determine the density of the solid block (in kg/m3 ) floating at the interface of oil (SG = 0.8) and water if the fraction of the
block in water is 0.7.
Q.54 Water flows at a rate of 170 L/s through a bend meter, shown below. The diameter of the bend is 150 mm and pressure
drop is 300 mm of Hg. Resistance coefficient of the bend will be _________.
Q.55
The overall heat transfer coefficient due to convection and radiation for a steam main at 207°C running in a large room at
27°C is 18 W/m2 K. The heat transfer coefficient due to convection, taking emissivity of the pipe surface as 0.7 is
__________ W/m2 K.
Q.56 In a steam power plant, heat is supplied to the feedwater at the rate of 2500 kJ/kg. The exhaust steam gives up heat at the
rate of 1000 kJ/kg. The steam rate through the plant is 4 kg/kWhr. If the generator efficiency is 90%, the thermal efficiency
exceeds the brake thermal efficiency by _________ percent.
Q.57 Air enters an axial flow compressor at the rate of 25 kg/s. At the inlet of the first stage, the stagnation pressure and
temperature are 1 bar and 300 K respectively. If the power input per stage of the compressor is 502.5 kW, then taking
inentropic efficiency of 85%, the number of stages required to deliver air at stagnation pressure of 4 bar is ___________.
Q.58 A medium carbon steel workpiece is turned on a lathe at 50 m/min speed, 0.8 mm/rev feed and 1.5 mm depth of cut. The
rate of material removal is _________ mm3 /min.
Q.59 Air at 30°C is to be heated and humidified to 40°C DBT and 35°C WBT. It is made to pass through an adiabatic humidifier
followed by a heater having surface coil temperature 50°C and a bypass factor 0.4. If the WBT at the exit of humidifier is
20°C, the humidifying efficiency is __________ percent.
Q.60
The value of a + b is ________.
Q.61 For a system with fixed order quantity, the following parameters for an item are given
Annual demand (D) = 50000 units
Unit cost = Rs. 2
Ordering cost = Rs. 15 per order
Holding cost = 12%
The past lead times are found to be 10 days, 20 days, 15 days, 15 days, The reorder level is ___________ units. (Take
number of working days in a year = 250)
Q.62 Following data is observed for a tool during machining operation
The Taylor's tool life index of the tool is __________.
Attempt Correct Correct Ans. 0.443(0.442 0.445) FAQ? Have any doubt? Solution
Q.63 During the testing of a 4 cylinder, 4 stroke IC engine, the following data was noted
Brake power = 45 kW
Mechanical efficiency = 75%
Fuel consumption rate at stoichiometric condition = 12.5 kg/hr
Equivalence ratio = 1.1
Calorific value of fuel = 45000 kJ/kg
The indicated thermal efficiency of the engine is _____________ percent.
Q.64
The value of integral
Q.65
The residue of f (z) = is ______.