Documente Academic
Documente Profesional
Documente Cultură
M3
R15 FDS2-320-05 (F)
(SUS type, 45mm) ※2 2m Rotary
40 Ø0.03 (SUS part -40 to 70℃ Encoders
M4 (Free cut)
R10) FDS-420-05
(SUS type, 90mm) (G)
Connectors/
Connector Cables/
M4 Sensor Distribution
FDS2-420-05
(SUS type, 45mm) Boxes/ Sockets
(H)
※2 2m Temperature
M6 120 Ø0.03 R30 -40 to 70℃ FD-620-10 Controllers
(Free cut)
M6 (I)
R30 FDS-620-10 SSRs / Power
(SUS type, 90mm) ※2 2m Controllers
120 Ø0.03 (SUS part -40 to 70℃
M6 (Free cut)
R10) FDS2-620-10
(SUS type, 45mm) (J)
Counters
※2 2m
M6 120 Ø0.03 R30 -40 to 105℃ FD-620-10H
Bolt type
(Free cut)
(K)
Heat-resistant type
Timers
※2 2m
M6 160 Ø0.03 R50 -40 to 150℃ FD-620-15H1
(Free cut) (L)
Panel
Meters
M4
GD-420-20H2
(Glass type) (M)
※2 Tacho /
100 Ø0.03 R50 2m -40 to 250℃ Speed / Pulse
M6 Meters
GD-620-20H2
(Glass type)
(N)
Display
Units
M3 FD-320-05R
※ 4
※1 2m
35 Ø0.0125 R1 -40 to 60℃ (O)
Flexible type
(P)
Switching
※1 2m Mode Power
M6 130 Ø0.04 R1 -40 to 60℃ FD-620-10R
(Free cut) Supplies
(Q)
Stepper Motors
& Drivers
4
※2 2m (R)
35 Ø0.0125 R5 -40 to 60℃
(Free cut) Graphic/
Logic
Panels
M4 FD-420-06B
(S)
Field
Network
※2 2m Devices
M6 100 Ø0.0125 R5 -40 to 60℃ FD-620-13B
(Free cut)
(T)
Software
※1: The sensing distance is a standard for BF5 Series.
※2: The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED.
It is applied to 40% of sensing distance for BF3RX.
※3: Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated
sensing distance ※2.
※4: Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many
places as the change of the intensity of radiation by bending is small.
Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of
flexibility. It can be used for moving parts (robot hand) and it is not easily broken.
※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable.
[(FC-3) should be used for cutting fiber cable.]
※Glass type is for BF5, BF4 Series.
B-45
Fiber Optic Cable
※2 2m
M3 60 Ø0.03 R30 -40 to 70℃ FD-320-F1
(Free cut)
※2 2m
M6 120 Ø0.03 R30 -40 to 70℃ FD-620-F2
(Free cut)
※2 2m
Ø3mm 40 Ø0.03 R15 -40 to 70℃ FDC-320-05
Standard
(Free cut)
type
R15
Ø3mm ※2 2m
40 Ø0.03 (SUS part -40 to 70℃ FDCS-320-05
(SUS type, 15mm) (Free cut)
R10)
Break-resistant
type 4
※2 2m
Ø3mm 35 Ø0.0125 R5 -40 to 60℃ FDC-320-06B
※
(Free cut)
Cylinder type
Standard type
Ø3mm ※1
30 Ø0.0125 R15 2m -40 to 60℃ FDCSN-320-05
Side view
※1 1m
Top view 35 Ø0.0125 R1 -40 to 60℃ FDFU-210-05R
(Free cut)
Flexible type
1m
Flat type
※1
Side view 30 Ø0.0125 R1 -40 to 60℃ FDFN-210-05R
(Free cut)
※1 1m
Flat view 30 Ø0.0125 R1 -40 to 60℃ FDF-210-05R
(Free cut)
Standard Flexible
1m
angle
Right
type
※1
M6 120 Ø0.04 R1 -40 to 60℃ FDR-610-10R
(Free cut)
Plastic
Plastic injection 2m
type
※2
120 Ø0.03 R30 -40 to 70℃ FDP-320-10
molding type (Free cut)
Convergent ※1
8 Ø0.0125 R25 2m -40 to 60℃ FLF-320-10
reflective type
B-46
Fiber Optic Cable
Pressure
(SUS type, 45mm) (Free cut)
R10) Sensors
M3
FTS2-320-05
(SUS type, 45mm) (F)
Rotary
Encoders
※2 2m
M4 500 Ø1 R30 -40 to 70℃ FT-420-10 (G)
(Free cut) Connectors/
Connector Cables/
R30 Sensor Distribution
M4 ※2 2m Boxes/ Sockets
500 Ø1 (SUS part -40 to 70℃ FTS-420-10
(SUS type, 90mm) (Free cut)
10) (H)
Temperature
R30 Controllers
M4 ※2 2m
500 Ø1 (SUS part -40 to 70℃ FTS2-420-10
Bolt type
(Free cut)
(J)
Counters
※2 2m
M4 500 Ø1 R50 -40 to 150℃ FT-420-15H1
(Free cut)
(K)
Timers
M4 ※2
400 Ø1 R25 2m -40 to 250℃ GT-420-13H2
(Glass type)
(L)
Panel
※ 4
※1 2m Meters
M3 110 Ø0.3 R1 -40 to 60℃ FT-320-05R
Flexible type
(Free cut)
(M)
Tacho /
※1 2m Speed / Pulse
M4 500 Ø0.5 R1 -40 to 60℃ FT-420-10R Meters
(Free cut)
(N)
Break-resistant
Display
※1 2m
M3 110 Ø0.3 R5 -40 to 60℃ FT-320-06B Units
(Free cut)
type 4
※
(O)
※1 2m Sensor
M4 400 Ø0.6 R5 -40 to 60℃ FT-420-13B Controllers
(Free cut)
(P)
※2 2m Switching
Ø1.5mm 150 Ø0.5 R15 -40 to 70℃ FTC-1520-05 Mode Power
(Free cut) Supplies
(Q)
2m
Standard type
Cylinder type
※2 Stepper Motors
Ø2mm 150 Ø0.5 R15 -40 to 70℃ FTC-220-05 & Drivers
(Free cut) & Controllers
R15 (R)
Ø2mm ※2 2m Graphic/
150 Ø0.5 (SUS -40 to 70℃ FTCS-220-05 Logic
(SUS type, 15mm) (Free cut)
part10R) Panels
(S)
※2 2m Field
Ø3mm 150 Ø1 R30 -40 to 70℃ FTC-320-10
(Free cut) Network
Devices
B-47
Fiber Optic Cable
※1 2m
Ø3mm 110 Ø0.3 R1 -40 to 60℃ FTC-220-05R
※
(Free cut)
Break-resistant
type 4
※2 2m
Ø3mm 110 Ø0.3 R5 -40 to 60℃ FTC-1520-06B
※
(Free cut)
Cylinder type
Standard type
Ø2.47mm ※1
120 Ø0.0125 R15 2m -40 to 60℃ FTCSN-2520-05
Side view
※1 1m
Top view 110 Ø0.04 R1 -40 to 60℃ FTFU-210-05R
(Free cut)
※1 1m
Side view 110 Ø0.04 R1 -40 to 60℃ FTFN-210-05R
(Free cut)
※1 1m
Flat view 100 Ø0.04 R1 -40 to 60℃ FTF-210-05R
(Free cut)
Flexible type
Flat type
Side view+
※1 1m
Top view 110 Ø0.04 R1 -40 to 60℃ FTFB-210-05R
(Free cut)
(Bending)
L type Top view
FTLU-310-10R
height 12.2mm
L type Top view ※1 1m
500 Ø0.06 R1 -40 to 60℃ FTLU1-310-10R
height 17.2mm (Free cut)
L type Top view
FTLU2-310-10R
height 22.2mm
Flexible
1m
angle
Right
type
※1
M4 460 Ø0.5 R1 -40 to 60℃ FTR-410-10R
(Free cut)
Flexible type
Area type
※5 1m
Sensing height: 11mm Ø1mm 750 Ø0.07 R2 -40 to 60℃ FTW11-210-10R
(Free cut)
Standard
Plastic
Plastic injection 2m
type
※2
500 Ø1 R30 -40 to 70℃ FTP-320-10
molding type (Free cut)
B-48
Fiber Optic Cable
Dimensions (A)
Photoelectric
Sensors
Model Diffuse reflective type Model Diffuse reflective type
FDFU-210-05R M2-D0.5 / ※Hood material: Stainless steel type 303 FDC-320-06B M3-D0.6 (B)
Fiber
Optic
2-Ø1 Sensors
15 2000
(C)
6.5
2-Ø0.5 Door/Area
1
1.2
Sensors
2 4 2-Ø2.1(M2 BOLT)
2 2-Ø0.6
(Ø0.25×4) Ø3 2-Ø1
8 1000 (D)
Proximity
Sensors
FDFN-210-05R M2-D0.5 / ※Hood material: Stainless steel type 303 FD-420-06B M4-D0.6
2-Ø1 (E)
Pressure
Sensors
7
7 15 2000
2
Boxes/ Sockets
FDF-210-05R M2-D0.5 / ※Hood material: Stainless steel type 303 FD-620-13B M6-D1.3 (H)
Temperature
Controllers
1.5 2-Ø0.5
(J)
2.5
Timers
Ø3 2-Ø1 (Q)
Ø1.5 Stepper Motors
2-Ø0.5 M3×0.5 2-Ø1 2-Ø0.5 & Drivers
& Controllers
FD-420-05(R) M4-D0.5 FDS-320-05 M3-D0.5 / Stainless steel Ø1.5×90mm
(R)
Graphic/
Logic
15 2000 Panels
5.5 90 12 2000
7 3 12 (S)
Field
Network
Devices
2-Ø0.5
2-Ø0.5 Ø1.5 M3×0.5 2-Ø1
(Ø0.25×4) Ø2.6 M4×0.7 2-Ø1 (T)
Software
FD-620-10(R) M6-D1.0
18 2000
10 3 15
B-49
Fiber Optic Cable
Dimensions
Model Diffuse reflective type Model Diffuse reflective type
FD-320-06B M3-D0.6 FDS2-320-05 M3-D0.5 / Stainless steel Ø1.5×45mm
90 15 2000
5.5 12 2000 7
3 12
2-Ø0.6
(Ø0.25×4) M3×0.5 2-Ø1 2-Ø0.5 Ø1.5 M4×0.7 2-Ø1
90 15 2000 15 2000
7 1-Ø0.5(Emitter)
3 12 12 3 Ø1(Emitter)
5.5
Ø4
2-Ø0.5 Ø1.5 M4×0.7 2-Ø1 16-Ø0.265(Receiver) M6×0.75 2-Ø2.2
90 18 2000 18 2000
10 3 15 10 3 15
Ø4
Ø3
Ø2 M4×0.7 Ø3.8 Ø5
2-Ø2.2 Ø7 Ø2.9 Ø2.2
2-Ø1 10 4-Ø3.1 (Ø0.05×1000)
Ø2
M3×0.5 2-Ø1 M6×0.75 Ø3.8 Ø5 Ø7 Ø2.9 Ø2.2
4-Ø0.25(Receiver) (Ø0.05×1000)
FDR-610-10R M6-D1.0 / ※Hood material: Stainless steel type 303 FDCSN-320-05 Ø3 / Stainless steel Ø1.47×20 / Side view
2000
Ø4
25.5
M6×0.75
Ø11.5 2-Ø1 15 15 Ø1.25 15
8 3
1000
17
1.1
10
B-50
Fiber Optic Cable
Dimensions (A)
Photoelectric
Sensors
Model Convergent reflective type
FLF-320-10 M3-D1.0 / convergent reflective type (B)
19.65 2000 Fiber
Optic
Sensors
8.95 7
Ø1×2 2-Ø3.2(M3 BOLT) 10.5 15
(C)
Door/Area
Sensors
6.5
13
(D)
5 6 2.4 Proximity
2.25 Ø1.3 Ø4 Ø2.2 Sensors
(E)
Model Through-beam type Model Through-beam type Pressure
Sensors
FTFU-210-05R M2-D0.5 / ※Hood material: Stainless steel type 303 FT-310-05 M3-D0.5
Ø1
(F)
1
Ø0.5
2
(G)
2 4 2-Ø2.1(M2 BOLT) Connectors/
2 Connector Cables/
8 1000 Ø0.5 M3×0.5 Ø1 Sensor Distribution
Boxes/ Sockets
FTFN-210-05R M2-D0.5 / ※Hood material: Stainless steel type 303 FT-320-05(R) M3-D0.5 (H)
Ø1 Temperature
Controllers
6
1 Ø0.5
(J)
Ø0.5 M3×0.5 Ø1 Counters
2
FTF-210-05R M2-D0.5 / ※Hood material: Stainless steel type 303 FTC-220-05(R) Ø2-D0.5 (K)
Timers
1.5 Ø0.5
(L)
Ø1 15 2000 Panel
Meters
3 1
13
8
(M)
Tacho /
Speed / Pulse
2 4.5 2-Ø2.1(M2 BOLT) Ø0.5 Ø2 Ø1 Meters
2 1000
(N)
Display
FTFB-210-05R M2-D0.5 / ※Hood material: Aluminum FT-420-10R M4-D1.0 Units
7 20 2000
(O)
3 12 Sensor
Controllers
Ø1
(P)
10
Ø1 M4×0.7
5
Ø2.2 Switching
Ø0.5 Mode Power
M2.6×0.45 Supplies
2.5 2-Ø2.1(M2 BOLT)
3 FT-320-06B M3-D0.6 (Q)
10 1000 Stepper Motors
& Drivers
6 5.5 12 2000 & Controllers
(R)
Graphic/
Ø0.6 Logic
Panels
(Ø0.25×4) M3×0.5 Ø1
(S)
FTLU-310-10R M2-D0.5 / ※Hood material: Aluminum FTC-1520-06B Ø1.5-D0.6 Field
Network
Devices
FTLU1-310-10R 15 2000
FTLU2-310-10R (T)
Software
17 1000
4 Ø1.3
4 8.5 2-Ø3.4(M3 BOLT) Ø0.6
(Ø0.25×4) Ø1.5 Ø1
Ø2.2
4
FT-420-13B M4-D1.3
12
15 2000
L2 Model L1 L2 7
2.2 3 12
L1 FTLU-310-10R 12.2 10
FTLU1-310-10R 17.2 15
FTLU2-310-10R 22.2 20
Ø1.3 M4×0.7 Ø2.2
(Ø0.265×16) M2.6×0.45
B-51
Fiber Optic Cable
Dimensions
Model Through-beam type Model Through-beam type
FTC-1520-05 Ø1.5-D0.5 FTP-320-10 D1.0 / Plastic
7.5 14 2000
15 2000
19
13
Ø0.5 Ø1.5 Ø1 Ø1 4-Ø3.1 Ø2.2
10
90 15 2000
15 15 2000
7 3 12
45 2000
5.5 90 12 2000 3 12
7
M4×0.7 Ø4 Ø2.2
Ø1 Ø2.2 Ø1.3 M4×0.7
M2.6×0.45
M2.6×0.45
Glass fiber with Ø2.9 sus protective armor.
FTC-320-10 Ø3-D1.0 FTR-410-10R M4-D1.0 ※Hood material: Stainless steel type 303
M2.6×0.45
20 2000
M4×0.7
3 1 11 Ø8.1
Ø1
7.3 3
1000
14.4
7
Ø1 Ø3 Ø2.2 Ø2.2
B-52
Fiber Optic Cable
Mounting of lens
Door/Area
Mount the lens unit on the 3mm projecting point of the front
hood.
Ø4
(D)
M2.6×0.45 Proximity
Sensors
Micro Spot Fiber Optic Cable And Lens Unit (sold separately) (F)
Rotary
Fiber optic cable: FDC-320-F It should be used within -40 to 100℃. (not over 100℃.)
(G)
Connectors/
Connector Cables/
Micro spot lens: FDC-2 (unit: mm)
Sensor Distribution
Dimensions Boxes/ Sockets
0.9
6.0
0.7
L (mm)
5.0
FDC-2 4.0 FDC-2 23 (K)
ℓ
Timers
3.0 10 13
2.0
1.0
3 (L)
Panel
0.0 Meters
4.0 8.0 12.0 15.0
Ø3.7
Ø6
(M)
Insertion length ℓ (mm) Tacho /
Lens Speed / Pulse
Meters
Application Applications: Cutting fiber optic cable, free cut type (O)
Sensor
: Protect cable from impact or cutting (unit: mm) FC-3 Controllers
(P)
Model Appearance and Dimension L Switching
Mode Power
Supplies
Ø6
& Controllers
12 8
FTH-310 L 1000 (R)
Graphic/
Logic
Panels
4-Ø2.4 4-Ø1.4
FTH-405 M4×0.7 Depth: 4 Ø5.8 500 (S)
Ø4 Field
Network
Adapter
Ø7
Ø7
Devices
12 8
FTH-410 L 1000 Adapter: Adapter marked fiber optic cable should be used (T)
Software
with adapter (unit: mm)
31.5
FDH-605 M6×0.75 Depth: 4 Ø7.5 Ø5 500
21.0 10.5
Ø1.3 Ø1
Ø9
Ø9
Ø2.2
Ø4
12 8
FDH-610 L 1000
B-53