Documente Academic
Documente Profesional
Documente Cultură
You are on board vessel (type) _______________________________, ship’s LOA __________, ship’s draft _________, navigation
area _____________________. You are required to check the display of ECDIS system and note the steps that you have followed.
3. Where can you find info about alarm status, with one click?
11. Set the display to dual vertical view / horizontal view. What is the
purpose of this option?
12. Set ship’s vector length to 16 min. Move your vessel near displays’
limits so that the ship’s vector to cross the edge.
13. Choose one small area and zoom it so that to appear only that area
on the display. Note the warning displayed.
14. Bring the vessel in the middle of the display.
You are on board vessel (type)_______________________________, ship’s LOA __________, ship’s draft _________, navigation
area _____________________. You are required to use the ECDIS functions to take measurements in your navigational area. Note
the steps that you have followed.
13. How do you change the display into another colour set? (Night
view, daylight…)
14. Make sure that Chart auto load is set to ON.
15. Set the time zone for CET (Central European Time).
You are on board vessel (type) _______________________________, ship’s LOA __________, ship’s draft _________, navigation
area _____________________. You are required to create a route on ECDIS system and note the steps that you have followed.
5. Set XTD port and starboard for your route to 0.5 NM for your route.
6. Set XTD starboard to 0.3 for legs between WP5 and WP7.
8. Check the route. How many alarms do you have? Adjust the route before
accept the route. Save the route.
9. Monitor the route. Get out of monitoring route.
10. Go to quick distance calculator and calculate the distance between WP4
and WP9
11. What is your SOG?
Exercise No.4 Safety functions. Settings of the Displayed Electronic Navigational Chart
Objective By completing the tasks the trainees will be familiar with the Electronic Navigational Chart appearance used with
ECDIS. The settings provide the deck officer with a sum of means intended to assure safety of navigation.
Time 90 min
You are on board vessel (type)_______________________________, ship’s LOA __________, ship’s draft _________, navigation
area _____________________. You are required to set the display ENC appearance and note the steps that you have followed.
13. Where can you find the unit measurements that have been set for
your chart?
14. Bring the radar image over your electronic chart. What is the color
in use? Change it to Red.
15. Activate the CATZOC function. Explain the purpose of this function
17. Set the standard display view? Can you find it with one click?
18. Set the deep contur to 18m. What happens with the others safety
parameters?
Trainee’s Name _____________________________
ECDIS
You are on board vessel (type)_______________________________, ship’s LOA __________, ship’s draft _________, navigation
area _____________________. You are required to create several layers and then put them together. Note the steps that you have
followed.
5. Add a new object including the text “WRECK” and add a danger
depth of 8 m.
6. Move the object approx. 0.5 M west from its original position.
9. So far you have worked in User Chart A. Now activate the User
Chart B.
10. Load “Layer 1” in user Chart A.
14. Make sure that both User Charts are activated and press Merge.
Enter “Layer 3” in the Save box.
15. Create No-Go Areas using the Add info tool.
17. Activate user Chart A. Load available the Layers. Unload them.
You are on board vessel (type)_______________________________, ship’s LOA __________, ship’s draft _________, navigation
area _________________. You are required to plan the route considering advanced settings. Note the steps that you have followed.
3. Link the two routes. Give name and save the new route.
9. Using the quick distances calculator, find the total distance. Find
the distance between WP3 and WP8.
10. Set advanced cursor with starboard Headmark to 90deg and fixed
range marker at 2 NM while editing a route with 4 WPs.
11. Edit a SAR Route. Give name to the route.
12. Position the datum of the SAR route (starting point) at exactly 1
NM ahead of your vessel.
13. Reposition the datum at 2.5 NM right astern of your vessel.
15. Create a Gr. Circle route from North America to UK. Monitor it.
16. Modify the GC route by placing WPs to every 5 deg. Check the
route and monitor it.
17. On the GC route create an alternative passage plan, passing by
south from WP5 to WP8.
18. Calculate the difference between the distances of the RL route and
the GC route.
Trainee’s Name _____________________________
ECDIS
You are on board vessel (type)_______________________________, ship’s LOA __________, ship’s draft _________, navigation
area _____________________. You are required to monitor the route by several tools. Note the steps that you have followed.
17. Use the manually fix position to determine the ship’s position with
Bearing and Distance.
18. Use the manually fix position to determine the ship’s position with
two bearings.
Trainee’s Name _____________________________
ECDIS
You are on board vessel (type)_______________________________, ship’s LOA __________, ship’s draft _________, navigation
area _____________________. You are required to plan the voyage. Note the steps that you have followed.
2. Go to schedule calculation.
3. Insert the speed of 12 Knots for all WPs and set the ETD current
date and time.
4. Select tide surface and press calculate. Name the schedule.
8. By making the difference between the two ETA, can you find the
30min delay?
9. Let’s consider that we have to reach the destination at a certain
time for the same route. Clear the schedule.
10. Set for the first WP the current date and time. Set for the last WP
the ETA.
11. Press calculate. What speed should be kept?
12. Calculate the ETA for the situation the vessel is steering with 20
Knots.
13. At WP 3 make a stop of 1 hour. Re-calculate the time of arrival.
14. Set the XTE between WP3 and WP5 to 0.3 NM and the turn radius
to 0.8.
15. Check the route and note the alarms.
16. Use the add-info function to insert by cursor a NoGo area. Make
the area orange. Note the limits (Lat and Long).
17. Calculate new limits for an area by adding 0.5’ to each lat and 0.6’
to each long. Note the new limits.
18. Use the same add-info function to insert numerically the new
NoGo area.
Trainee’s Name _____________________________
ECDIS
You are on board vessel (type)_______________________________, ship’s LOA __________, ship’s draft _________, navigation
area _____________________. You are required to manually correct the ENC. Note the steps that you have followed.
1. Create a route with 5 WPs. Note the lat and long of WPs. Check,
Save, Monitor the route.
2. Add 5’ to each long. Note the WPs of the new route.
3. Introduce the new route manually. Give name. Save the route.
8. Move both inserted dangers 0.5 NM toward west from the original
positions.
9. Insert on chart a West cardinal Buoy with attachment “caution” at
0.8 NM on your starboard beam.
10. Draw a square in full red colour with 0.5 NM each side,
starting 2 NM on your port beam.
11. Place an anchor inside. Make the depth to appear next to the
anchor sign.
12. Modify the WP3. Save the route
14. Check the tide in the navigational area. Note the value.