SEPPRO has developed a highly efficient CBD extraction
technology: Extraction of cannabinol from flowers and leaves of industrial cannabis using supercritical CO2 extraction and the cannabidiol extract is further purified by macroporous adsorption resin and rapid purification system.
Diphenol product content exceeds 98%.
chinasep.com 2/4
Advantages of this process
1. The chemical organic solvent is not used in the extraction process, which is environmentally friendly, low in toxicity and high in efficiency; 2. The purification process reduces the loss of cannabidiol in the adsorption and elution process. 3. Effectively removes impurities such as tetrahydrocannabinol 4. The use of organic reagents is reduced, the purification cost is reduced, and environmental pollution is reduced.
CBD Extraction Technology
Flow Chart chinasep.com 3/4
CBD Extraction Technology
Process Step 1: Harvest the mosaic leaves of the hemp mature, remove the water and smash it for use. Step 2: using a supercritical CO2 extraction technique to extract cannabinol at a certain temperature and pressure to obtain a cannabidiol extract. Dissolving the cannabidiol extract in anhydrous ethanol to obtain a cannabidiol solution, centrifuging the cannabidiol solution and collecting the supernatant. Step 3: adding the supernatant to the macroporous adsorption resin, and oscillating at a certain temperature to complete the adsorption. The macroporous adsorption resin was separated by suction filtration, and the filtrate was collected; the macroporous adsorption resin was eluted with 60% ethanol, and the eluate was collected. Regenerating the macroporous adsorption resin with absolute ethanol. Combining and concentrating the filtrate and the eluate to obtain a cannabidiol concentrate. Step 4: further purifying the cannabidiol concentrate by using a rapid purification system, using a silica gel packing separation column, using a normal phase reagent petroleum ether and ethyl acetate as a mobile phase for isocratic elution, using thin layer chromatography to monitor fractions, collecting The cannabis diphenol fraction is concentrated under reduced pressure to obtain a cannabidiol purification liquid. Step 5: The cannabidiol purification liquid is dried to obtain a white solid cannabidiol product.
Resin In the CBD Extraction Process
SEPPRO® CBD-1700:Resin technology for
CBD extraction chinasep.com 4/4
CONTACT US If you are interested in our technology for CBD extraction.Please let us know. CONTACT US