Documente Academic
Documente Profesional
Documente Cultură
WWW.MEPWORK.COM
1- Are you capable of making the calculations of A/C system and
which program do use?
7- Identify Enthalpy.
10- Compare between the package unit system and the chilled
water system and mention the buildings in which we can use both
of them and why?
11- Identify the VRV system and mention the advantages and
disadvantages of it.
12- Mention the types of the compressors used in the A/C systems.
And in which system we can use each one of them.
13- Mention the required points that should be ready for the
choice of the A/C unit.
(total load = 3.0 ton - Sensible load = 2.50 ton - CFM discharge =
1200 CFM), Which of the following unit should be used?
Unit (1) Total load = 2.5 ton Sensible load = 2.5 ton 1300 CFM
Unit (2) Total load = 3.5 ton Sensible load = * ton 1100 CFM
Unit (3) Total load = 3 ton Sensible load = 2 ton 1400 CFM
15- Which of the following Ducts is more efficient and why? And
what are its disadvantages? a) 50x50 b) 20x125 c) 70x35
18- What are the required points to be ready for preparing the A/C
grills?
19- What are the required conditions distributing the feed fans and
the exhaust fans on the deck?
20- Why should we use primary pump and secondary pump in the
chilled water system?
21- When should we install the expansion tank in the cold water
circle?
23- What are the ways of reducing the vibration caused by the
chillers on deck?
d) Flow meter
e) Flow meter
https://www.mepwork.com/2018/10/hvac-interview-test-pdf.html