Documente Academic
Documente Profesional
Documente Cultură
PNY500
Perkins E15TAG4
HCI534D
135 x 167
16.1
/Enfriado por aire
582
2574
10
128
332
132
511
866
105.3
Dimensiones (Largo x Ancho x Alto)cm 350x153x205
Peso Aprox. humedo kg. 3475
MA
MA
UALITY
UALITY
ED Q
ED Q
IFI
IFI
RT
RT
CE CE
Ottomotores se reserva el derecho de hacer cambios sin previo aviso con el fin de mejorar nuestros productos 2010.
MODELS
Ø Out=23.00 Radiator
116.70 PNE 495
Ø In=00.00
Turbocharger
PNY 500
Air Flter
Connection Box
168.00
205.00
Generator
101.00(39.76") ±0.4
46.00 143.96 144.00 46.00
107.00(42.12") ±0.4
380.00
FRONT VIEW
SIDE VIEW
107.00 ±0.4
112.00 ±0.4
27.00
DESCRIPTION
RADIATOR : ELECTROPACK
ENGINE: 2506-AE15TAG4
GENERATOR: HCI534C
AIR FILTER: ------
BASE FRAME: BP-PRK16G1-WG
TOTAL WEIGHT: DRY-3353.00kgs.
Ø Out=23.00 WET:-3535.00kgs.
Ø In=00.00 AVMS SPRING. 6 PZS
TOP VIEW 127.46
-THE GENSET DIMENSIONS ARE THE SAME BY FAMILY MODEL, THERE COULD BE ONLY DIFFERENCES ON THE ALTERNATOR
LENGHT SEE SPECIFIC GENERAL ARRAGEMENT DRAWING OF CERTEIN MODEL
-TOTAL WEIGHT COULD VARY CHECK RATING CHART FOR EACH MODEL
Scale: s/e
N/A
Of:
Rev. Description Date Certificated N/A
Reviews Ottomotores keeps the right to change the information with out prior notice
FO 023-0
2500 Series
2506A-E15TAG4
Diesel Engine – ElectropaK
Non-Emissions compliant
435 kWm at 1500 rpm
543 kWm at 1800 rpm
Economic Power
Mechanically operated unit fuel injectors with advanced electronic control,
combined with carefully matched turbocharging, give excellent fuel atomisation
which leads to exceptional low fuel consumption.
Reliable Power
Developed and tested using the latest engineering techniques and finite element
analysis for high reliability.
The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS 5514/1.
Derating may be required for conditions outside these; consult Perkins Engines Company Limited. Generator powers are typical and are based on an average alternator efficiency and a power factor (cos. θ) of 0.8.
Fuel specification: BS 2869: Part 2 1998 Class A2 or ASTM D975 D2. Lubricating oil: 15W40 to API CI4.
Rating Definitions
Baseload Power: Power available for continuous full load operation. Overload of 10% permitted for 1 hour in every 12 hours operation.
Prime Power: Power available at variable load with a load factor not exceeding 80% of the prime power rating. Overload of 10% is permitted for 1 hour in every 12 hours’ operation.
Standby Power: Power available in the event of a main power network failure up to a maximum of 500 hours per year of which up to 300 hours may be run continuously. Load factor may be up to 100% of standby
power. No overload is permitted.
* Baseload ratings indicated are under development and will be available later.
All information in this document is substantially correct at time of printing and may be altered subsequently Publication No. 1844/01/08 Produced in England ©2006 Perkins Engines Company Limited
2500 Series
2506A-E15TAG4
Standard ElectropaK Specification
Electrical equipment
24 volt starter motor and 24 volt 70 amp alternator with DC output General Data
ECM mounted on engine with wiring looms and sensors Number of cylinders 6
3 level engine protection system Cylinder arrangement Vertical in-line
Cycle 4 stroke
Flywheel and housing Induction system Turbocharged and air-to-
High inertia flywheel to SAE J620 size 14 air charge cooled
SAE 1/2 flywheel housing Combustion system Direct injection
Cooling system Water-cooled
Mountings Bore and stroke 137 mm x 171 mm
Front engine mounting bracket Displacement 15.2 litres
Compression ratio 16:1
Direction of rotation Anti-clockwise, viewed
Optional Equipment on flywheel
Total lubrication system
110 volt/240 volt immersion heater
capacity 62 litres
Additional speed sensor
Total coolant capacity 58 litres
Temperature and pressure sensors for gauges
Dimensions Length 2657 mm
Air filter rain hood
Width 1120 mm
Twin starters/facility for second starter
Height 1718 mm
Tool kit
Dry weight (ElectropaK) 1,633 kg
Additional manuals
Closed circuit crankcase ventilation system Final weight and dimensions will depend on completed specification
All information in this document is substantially correct at time of printing and may be altered subsequently
Publication No. 1844/01/08 Produced in England ©2006 Perkins Engines Company Limited