Documente Academic
Documente Profesional
Documente Cultură
4 Berikan contoh hydrostatic barrier. Drilling mud, brine, oil. Hydrostatic barrier harus dimonitor secara berkala Barrier
untuk memastikan tidak ada perubahan sehingga dapat dianggap sebagai Policy
sebuah barrier.
Provide some example of hydrostatic barrier. Drilling mud, brine, oil. Hydrostatic barrier needs to be monitored
periodically to make sure there are no changes and can be considered as a
barrier.
5 Berapa jumlah mechanical barrier yang Anda miliki jika terdapat susunan Satu buah mechanical barrier. BOP stack dianggap sebagai satu buah
berikut ini di atas wellhead: Annular BOP, Blind/Shear Ram dan Pipe Ram? mechanical barrier walaupun memiliki Annular BOP dan beberapa buah
Ram BOP karena menggunakan sumber tenaga yang sama.
How many mechanical barrier do you have if the following are installed on One mechanical barrier. BOP stack is considered as a single mechanical
top of the wellhead: Annular BOP, Blind/Shear Ram dan Pipe Ram? barrier eventhough consists of Annular BOP and multiple Ram BOPs
because they are using the same power source.
6 Apa yang dimaksud dengan tekanan hidrostatik (HP)? Tekanan hidrostatik (HP) adalah tekanan yang disebabkan oleh berat dari Basic
sebuah kolom fluida. Concept
What is hydrostatic pressure (HP)? Hydrostatic pressure (HP) is pressure exerted by the weight of a fluid
column.
7 Bagaimana rumus untuk menghitung tekanan hidrostatik (HP) pada sebuah HP (psi) = 0.052 x Mud Weight (ppg) x True Vertical Depth (ft) Basic
sumur? Concept
What is the formula/equation to calculate hydrostatic pressure (HP) in a HP (psi) = 0.052 x Mud Weight (ppg) x True Vertical Depth (ft)
well?
Page 1 of 21 Rev. 5 Oct 2012
Well Control Question of the Day
Drilling & Completions - Sumatra Operation
IndoAsia Business Unit
Rig : ____________
Date /
No Pertanyaan/Question Jawaban/Answer Topik
Crew Shift
1
8 Betul atau salah: tekanan hidrostatik bergantung pada ukuran lubang (hole Salah. Tekanan hidrostatik hanya bergantung pada berat fluida (MW) dan Barrier
Basic
size) dan measure depth (MD). true vertical depth (TVD). Policy
Concept
True or false: hydrostatic pressure depends on hole size and measured False. Hydrostatic Pressure only depends on fluid weight (MW) and true
depth (MD). vertical depth (TVD).
9 Apa yang dimaksud dengan kondisi underbalance? Kondisi di mana bottom hole pressure (BHP) lebih kecil dibandingkan Basic
dengan tekanan formasi (FP) sehingga memungkinkan masuknya influx ke Concept
dalam sumur.
What is underbalance condition? Condition when bottom hole pressure (BHP) is less than formation pressure
(FP) thus creating possibility for influx in the well.
10 Apa yang dimaksud dengan fracture pressure (FR)? Tekanan yang jika dilampaui maka dapat menyebabkan pecahnya formasi. Basic
Jika formasi pecah maka akan terjadi loss circulation. Concept
What is fracture pressure (FR)? Pressure when exceeded will likely to break the formation. If the formation
breaks then loss circulation will occur.
11 Pada kondisi tekanan formasi apa yang dapat menyebabkan situasi well Semua kondisi tersebut dapat menyebabkan situasi well control: Basic
control: sub-normal, normal atau abnormal? * sub-normal: loss circulation menyebabkan fluid level turun sehingga Concept
menyebabkan kondisi underbalance dan memungkinkan masuknya influx
ke dalam sumur.
* normal: kita cenderung mempunyai kewaspadaan yang lebih rendah
ketika beroperasi di sumur yang bertekanan normal sehingga lupa/tidak
memperhatikan pengisian lubang ketika tripping --> fluid level drop dan
memungkinkan masuknya influx ke dalam sumur.
* abnormal: ditemukannya tekanan lebih tinggi yang tidak diharapkan pada
kedalaman yang lebih dangkal sehingga menyebabkan kondisi
underbalance dan memungkinkan masuknya influx ke dalam sumur.
What formation pressure that can cause a well control situation: sub- All well conditions can cause well control situation:
normal, normal or abnormal? * sub-normal: loss circulation causes the fluid level to drop and creating
underbalance condition thus allowing influx in the well.
* normal: we tend to have lower awareness when operating in a normal
pressure well and forget/do not fill the hole properly when tripping --> fluid
level could drop and allows influx in the well.
* abnormal: unexpected higher pressure found in shallower depth causes
underbalance condition and allows influx in the well.
Effect of ECD on BHP will be higher on which circulation: forward (normal) Reverse circulation. On reverse circulation, fluid from annulus flows into the
circulation or reverse circulation? Why? string/tubing which is normally smaller thus creating higher friction
pressure compares to forward circulation. ECD is related to friction
pressure.
13 Apa yang dimaksud dengan kondisi "pipe light"? Kondisi di mana berat pipa terapung yang ada di dalam lubang lebih ringan Basic
dibandingkan dengan gaya yang dihasilkan oleh tekanan sumur pada Concept
penampang pipa tersebut sehingga, jika tidak ditahan, pipa dapat didorong
keluar sumur oleh gaya tersebut.
What is "pipe light" condition? Condition when the buoyed weight of the pipe in the hole is lighter than the
upward force created by the well pressure on the cross section of the pipe
thus, if the pipes are not held, pipes could be pushed out of the hole.
14 Apa yang dimaksud dengan kondisi "pipe heavy"? Kondisi di mana berat pipa terapung yang ada di dalam lubang lebih berat Basic
dibandingkan dengan gaya yang dihasilkan oleh tekanan sumur pada Concept
penampang pipa tersebut sehingga, jika tidak ditahan, maka pipa dapat
meluncur masuk ke dalam sumur yang bertekanan tersebut.
What is "pipe heavy" condition? Condition when the buoyed weight of the pipe in the hole is heavier than
the upward force created by the well pressure on the cross section of the
pipe thus, if the pipes are not held, pipes could slip down into the under
pressured well.
15 Berapakah tekanan pre-charge pada botol accumulator? Minimum 1,000 psi pada sistem 3,000 psi. BOP Closing
System
What is the pre-charge pressure on accumulator bottles? Minimum 1,000 psi on a 3,000 psi system.
16 Berapakah tekanan operasi maksimum pada botol accumulator? 3,000 psi. BOP Closing
System
What is the maximum operating pressure on accumulator bottles? 3,000 psi.
17 Berapakah tekanan operasi minimum pada botol accumulator? Minimum 200 psi di atas tekanan pre-charge. BOP Closing
System
What is the minimum operating pressure on accumulator bottles? Minimum 200 psi above the pre-charge pressure.
19 Bagaimana posisi 4-way valve ketika operasi normal/drilling: open atau 4-way valve untuk BOP harus selalu di posisi open. BOP Closing
close? 4-way valve untuk HCR harus selalu di posisi close. System
What is the normal position for a 4-way valve while normal/drilling 4-way valve for BOP must be in open position.
operation: open or close? 4-way valve for HCR must be in close position.
20 Kapan 4-way valve diperbolehkan di posisi block? Hanya ketika perbaikan atau rig moving. BOP Closing
System
When can the 4-way valve be in the block position? Only on repair or rig moving.
21 Berapakah waktu maksimum untuk menutup Annular BOP dengan ukuran Harus menutup dalam waktu 30 detik. BOP Closing
lebih kecil dari 18-3/4" dan Ram BOP? System
What is the maximum time to close Annular BOP less than 18-3/4" and Should be closed in 30 seconds.
Ram BOP?
22 Berapakah waktu maksimum untuk menutup Annular BOP dengan ukuran Harus menutup dalam waktu 45 detik. BOP Closing
lebih besar dari 18-3/4"? System
What is the maximum time to close Annular BOP larger than 18-3/4"? Should be closed in 45 seconds.
23 Berapakah kapasitas minimum fluida reservoir yang harus dimiliki oleh Kapasitas minimumnya sebanyak 2x volume usable fluid. BOP Closing
sebuah accumulator? System
What is the minimum reservoir fluid capacity on an accumulator? Minimum capacity is 2x usable fluid volume
24 Apakah kita boleh mengunci 4-way valve untuk blind/shear ram pada Tidak boleh. Karena akan menghalangi pengoperasian 4-way valve tersebut BOP Closing
accumulator unit? Mengapa? dari remote panel tanpa ada intervensi. System
Can we lock the 4-way valve for blind/shear ram on an accumulator unit? We cannot lock it. Because it will prevent the 4-way valve to be operated
Why? from remote panel without intervention.
25 Apakah kegunaan air pump & electric pump pada accumulator unit? Sebagai sumber tenaga untuk memompakan hydraulic fluid dari reservoir BOP Closing
ke dalam botol-botol accumulator dan menjaga tekanannya tetap 3,000 System
psi.
What is the purpose of air pump & electric pump on an accumulator unit? As power source to pump hydraulic fluid from reservoir to accumulator
bottles and maintain the pressure at 3,000 psi.
26 Apakah kegunaan regulator pada accumulator unit? Untuk menurunkan tekanan hydraulic fluid dari 3,000 psi ke tekanan yang BOP Closing
dapat digunakan untuk mengoperasikan Annular BOP, Ram BOP dan juga System
HCR valve.
What is the purpose of regulator on an accumulator unit? To lower hydraulic fluid pressure from 3,000 psi to a more usable pressure
to operate Annular BOP, Ram BOP and HCR valve.
Page 4 of 21 Rev. 5 Oct 2012
Well Control Question of the Day
Drilling & Completions - Sumatra Operation
IndoAsia Business Unit
Rig : ____________
Date /
No Pertanyaan/Question Jawaban/Answer Topik
Crew Shift
1
27 Mengapa handle 4-way valve untuk Blind/Shear Ram perlu diberi cover Agar tidak dioperasikan secara tidak disengaja. Cover/protection tersebut Barrier
BOP Closing
atau protection? diharapkan membuat orang yang akan mengoperasikan Blind/Shear Ram Policy
System
tahu dan sadar atas apa yang akan dikerjakannya.
Why does 4-way valve handle for Blind/Shear Ram need to be covered or To avoid it being operated unintentionally. Cover/protection will make
protected? someone who is going to operate Blind/Shear Ram to fully understand and
aware on what he is about to do.
28 Berapakah tekanan di pressure gauge Manifold pada sebuah unit 1,500 psi BOP Closing
accumulator? System
What is the pressure on Manifold pressure gauge on accumulator unit? 1,500 psi
29 Berapakah tekanan di pressure gauge Annular pada sebuah unit 500 psi - 1500 psi BOP Closing
accumulator? System
What is the pressure on Annular pressure gauge on accumulator unit? 500 psi - 1500 psi
30 Apakah kegunaan by-pass valve pada accumulator unit? Untuk mem-by-pass tekanan accumulator (3,000 psi) agar mengalir BOP Closing
langsung ke manifold untuk mengoperasikan shear ram. System
What is the purpose of by-pass valve on accumulator unit? To by-pass accumulator pressure (3,000 psi) to flow directly to manifold in
order to operate shear ram.
31 Air pump/electric pump pada accumulator terus menyala secara berkala Menandakan kemungkinan adanya kebocoran pada accumulator --> pompa BOP Closing
walaupun tidak ada fungsi BOP yang dijalankan, menandakan apakah hal berusaha mempertahankan tekanan yang turun karena adanya kebocoran. System
itu?
Air/electric pump on accumulator keep running automatically in a periodic It indicates the possibility of leaking in the accumulator --> the pumps are
time eventhough no BOP is funcitoned. What does this indicate? trying to maintain accumulator pressure that is dropping due to leak.
32 Mengapa hydraulic line yang menghubungkan accumulator dengan rams Ketika Shear Ram akan digunakan maka tekanan accumulator akan di-by- BOP Closing
dan HCR harus di-test dengan 3,000 psi? pass sehingga semua hydraulic line pada manifold akan terisi dengan 3,000 System
psi sehingga harus di-test dengan tekanan sebesar itu.
Why does the hydraulic line that connects accumulator with rams and HCR When using Shear Ram, accumulator pressure will be by-passed and all
need to be tested with 3,000 psi? hydraulic lines will be filled with 3,000 psi thus need to be tested with the
same pressure.
What is the volume of kill fluid to be pumped while bullheading? At least equal to tubing/string volume plus the casing volume from tubing
tail to the bottom perforation.
36 Ketika menghitung berat Kill Fluid yang akan dipompakan ketika Kedalaman perforasi yang paling atas. Bullheading
bullheading, kedalaman perforasi mana yang digunakan?
When calculating Kill Fluid weight to be pumped for bullheading, which Top perforation depth.
perforation depth is used?
37 Ketika bekerja dengan Coiled Tubing Unit (CTU), data apa yang perlu Tubing management program yang mencatat jumlah bend cycle fatigue Coiled Tubing
dimintakan kepada penyedia coiled tubing? dan sisa masa pakai string coiled tubing.
When working with Coiled Tubing Unit (CTU), what data do we need to Tubing management program that records number of bend cycle fatigue
request to the coiled tubing provider? and remaining service life of the coiled tubing string.
38 Faktor apa saja yang mempengaruhi limit dari coiled tubing? OD coiled tubing, wall thickness, ovality, material yield strength dan adanya Coiled Tubing
kerusakan di badan coiled tubing.
What factors affecting the coiled tubing limit? Coiled tubing OD, wall thickness, ovality, material yield strength and
damage on coiled tubing.
39 Berapa batas ke-ovalan (ovality) coiled tubing sehingga diturunkan rating- Batas maksimum ovality = 3% (CVX) sementara API adalah 5%. Coiled Tubing
nya atau tidak dapat dipakai lagi?
What is the ovality limit for a coiled tubing before it is derated or junked? Maximum ovality limit = 3% (CVX) while API is 5%.
40 Berapakah rate pompa (SPM) yang direkomendasikan untuk operasi killing Serendah mungkin untuk meminimalkan friksi atau ECD. Constant
well? Bottom Hole
What is the recommended pump rate (SPM) for killing well operation? As low as possible to minimize friction or ECD. Pressure
In the first circulation of the Driller's Method, what pressure is kept Casing pressure per SICP at the end of the first circulation of the Driller's
constant while pumping the KMW from surface to the bit? Method which should be equal to the initial SIDPP.
In the second circulation of the Driller's Method, what pressure is kept Drillpipe pressure pas er Final Circulating Pressure (FCP).
constant while pumping the KMW from the bit back to surface?
58 Apa yang perlu diwaspadai jika acid yang disirkulasikan ke dalam sumur Ketika kembali ke permukaan, acid tersebut mungkin membawa gas Fluid
telah kembali ke permukaan? sebagai hasil reaksi kimia dengan formasi.
What needs to be awared of when circulating acid from downhole back to When back on surface, acid might have gas as the result of chemical
the surface? reaction with the formation.
59 Apakah fungsi fluida yang digunakan sebagai packer fluid? * memberikan tekanan pada packer & seal agar tidak bocor Fluid
* memberikan tekanan diferensial pada tubing & casing
* tujuan khusus seperti mencegah korosi
What is the purpose of packer fluid? * provide pressure on packer & seal to prevent it from leaking
* provide differential pressur on tubing & casing
* special purpose such as preventing corrosion
60 Apa yang perlu dilakukan agar tidak terjadi kick? Menjaga lubang selalu terisi penuh dengan berat lumpur yang dibutuhkan Kick
Detection
What needs to be done to prevent kick from occuring? Maintain the hole full with required mud weight.
61 Sebutkan 3 indikator positif terjadinya kick * Terdapat aliran lumpur ketika pompa mati Kick
* Penambahan laju alir dengan rate pompa yang tetap Detection
* Pit gain (penambahan lumpur pada pit)
What are the 3 positive kick indicator? * Flow with the pumps off
* Increase in flow with constant pump rate
* Pit gain
62 Apa yang harus dilakukan ketika terjadi drilling break? Matikan pompa, periksa apakah ada aliran lumpur. Kick
Detection
How to react on a drilling break? Shut down pumps, check for flow.
63 Mengapa berat lumpur yang digunakan harus lebih berat dibandingkan Untuk mencegah influx masuk ke dalam sumur. Kick
dengan tekanan formasi? Detection
Why does the mud weight being used need to be heavier than the To prevent influx from coming into the well.
formation pressure?
64 Mengapa perlu dilakukan space out sebelum menutup BOP? Agar tool joint tidak berada di dalam BOP stack. Kick
Detection
Why do you need to space out before closing the BOP? To avoid having tool joint in the BOP stack.
67 Posisi bit sudah dicabut hingga ke dalam casing ketika crew menyadari Tripping in kembali ke bottom dan mensirkulasi lumpur paling sedikit 1x Kick
adanya perbedaan volume untuk mengisi lubang. Dilakukan flow check dan bottom up untuk memastikan tidak ada influx yang masuk karena Detection
hasilnya negatif (tidak ada aliran). Apa tindakan yang paling baik untuk swabbing.
dilakukan terhadap situasi ini?
Bit has been pulled inside the casing when crew noticed volume different to Tripping back to bottom and circulate at least 1x bottom up to make sure
fill the hole. Flow check turns out to be negative (no flow from the well). there is no influx in the well due to swabbing.
What is the best action for this situation?
68 Pada operasi rig saat ini, apa yang harus dilakukan jika terjadi kick sekarang Jawaban sesuai dengan operasi rig saat ini. Kick
ini? Detection
With your current rig operation, what needs to be done if there is a kick Answer as per current rig operation.
right now?
69 Apa yang harus dilakukan oleh Mud Eng/Mud Boy jika melihat perubahan Melaporkan kepada Driller karena perubahan bentuk/jumlah cutting Kick
bentuk/jumlah cutting yang keluar di shaker? merupakan possible kick indicator. Detection
What should the Mud Eng/Mud Boy do if they notice changes on the Report to Driller as the changes on the shape/amount of cuttings are
shape/amount of cuttings coming out of the shaker? possible kick indicators.
70 Apakah kegunaan dari trip tank? Untuk mengetahui jika ada penambahan/pengurangan volume yang tidak Kick
sesuai dengan volume pipa yang dimasukkan atau dicabut. Detection
What is the purpose of trip tank? To identify deviation on mud volume being filled to/received from the well
that does not match with the pipe volume being tripped in or pulled out.
72 Mud Boy menimbang berat lumpur yang keluar dari flow line sebanyak 3x Kemungkinan masuknya influx ke dalam lubang. Mud Boy harus Kick
dan menemukan lumpur semakin ringan. Apa yang terjadi? Apa yang harus memberitahukan kepada Driller. Detection
dilakukan oleh Mud Boy?
Mud Boy measured the mud weight coming out of the flow line for 3x and Possibility of influx in the well. Mud Boy needs to inform the Driller.
found the mud is getting lighter. What happen? What should be done by
the Mud Boy?
73 Jika mud yang dipompakan ternyata mengandung gas yang terlarut, apa Gas terlarut akan memperingan lumpur sehingga HP berkurang dan dapat Kick
dampaknya pada sumur? menyebabkan kondisi underbalance. Detection
If mud being pumped has gas in it, what is the impact to the well? Dissolve gas will lightened the mud thus reducing HP and creating
underbalance condition.
74 Apakah kegunaan dari choke drill? Untuk melatih choke operator dalam mengoperasikan choke dan juga men- Kick
check akurasi pressure gauge. Detection
What is the purpose of choke drill? To train the choke operator in operating the choke and also to check
pressure gauge accuracy.
75 Apakah yang dimaksud dengan influx? Masuknya fluida yang tidak dinginkan yang berasal dari sumur. Kick
Detection
What is influx? Undesired flow of formation fluid into the well.
76 Mengapa influx bisa masuk ke dalam sumur? Influx bisa masuk jika tekanan hidrostatik (HP) di dalam sumur lebih kecil Kick
dari tekanan formasi. Detection
What causes influx to flow into the well? Influx can flow into the well when hydrostatic pressure (HP) in the well is
less than the formation pressure.
77 Mungkinkah terjadi kick ketika sedang Waiting On Cement (WOC)? Dapat terjadi. Ketika semen mulai mengeras dan bertransisi dari fase cair Kick
Mengapa? (liquid) ke padat maka ia kehilangan HP untuk menahan tekanan formasi Detection
sementara semen belum cukup keras (compressive strength masih rendah)
dan belum dapat menahan tekanan formasi tersebut.
Can a kick happen while Waiting On Cement (WOC)? Why? Yes it can. When cement starts to gel and in transition from liquid phase to
solid phase it looses its hydrostatic pressure (HP) while it has not develop
enough compressive strength to withstand the formation pressure.
How can loss circulation causing a kick? Loss circulation could cause drop in fluid level thus reducing hydrostatic
pressure and causing underbalance in the well.
82 Hal apa saja yang dapat menyebabkan loss circulation? * Tripping in terlalu cepat (surge pressure) Kick
* ECD yang terlalu tinggi Detection
* Komunikasi dengan zona loss
What could cause loss circulation? * Tripping in to fast (surge pressure)
* High ECD
* Communication with a loss zone
83 Sehubungan dengan well control, dragging ketika mencabut pipa dapat Swabbing --> dragging dapat disebabkan oleh cutting yang menumpuk Kick
menyebabkan apa? sehingga dapat mengakibatkan swab. Detection
Related to well control, what could happen if you experience drag while Swabbing --> dragging could be caused by cutting bed that might cause
pulling the pipe? swabbing.
84 Pada operasi apa saja kita harus memiliki rencana/plan untuk situasi well Pada SEMUA operasi. Kick
control? Detection
On which operation that we need to have plan for well control situation? On ALL operation.
For Hard Shut-in, there is only one step needed to shut-in the well, which is Close Annular BOP --> discuss the difference with Soft Shut-in to show why
……. CVX chose Hard Shut-in, which is to minimize the time and ultimately will
minimize influx volume.
86 Betul atau salah: swabbing hanya mungkin terjadi ketika bit berada di open Salah. Swabbing juga dapat terjadi ketika bit berada di dalam casing Kick
hole. Jelaskan jawabannya. terlebih lagi jika bit dalam kondisi balling. Detection
True or false: swabbing can only happened when the bit is in the open hole False. Swabbing could also occur with the bit inside the casing especially if
section. Explain the answer. the bit is in balling condition.
87 Mengapa crew di mud tank harus berhati-hati agar tidak ada air berlebihan Karena jika ada banyak air yang masuk ke dalam active pit akan dapat Kick
yang masuk ke dalam active pit yang digunakan dalam operasi drilling atau menurunkan berat lumpur yang ada di dalamnya sehingga menyebabkan Detection
workover? berkurangnya tekanan hidrostatik (HP) di dalam lubang dan pada akhirnya
menyebabkan sumur menjadi underbalance.
Why does the crew in the mud tank need to take extra caution to ensure Excessive water in the active pit could lower the mud weight inside thus
there is no excessive water get into the active pit that is being used in reducing hydrostatic pressure (HP) in the well and causing underbalance in
drilling or workover operation? the well.
88 Apa yang dimaksud dengan Trip Drill? Well control drill yang dilakukan saat tripping ketika bit sudah berada di Kick
dalam casing. Simulasikan terjadinya kick (dengan memanipulasi PVT/mud Detection
logger jika tersedia atau melalui pemberitahuan secara langsung) dan lihat
reaksi Driller serta crew dalam melakukan 3S. Umumkan jika itu hanyalah
latihan sebelum Driller menutup BOP.
What is Trip Drill? Well control drill that is done while tripping with the bit already inside the
casing. Simulate kick (by manipulating PVT/mud logger if available or by
direct information) and observe Driller & Crew reaction in performing the
3S. Declare it is merely a drill before Driller close the BOP.
90 Apa yang harus dilakukan jika ada permintaan untuk memperdalam lubang STOP, hitung kembali Kick Tolerance, buat MOC dan Risk Assessment (RA). Kick
(deepening) yang tidak ada di rencana/program awal? Deepening baru bisa dikerjakan jika MOC & RA telah disetujui oleh semua Tolerance
pihak yang terlibat.
What should be done when there is a request to deepen the well that is not STOP, recalculate Kick Tolerance, develop MOC and Risk Assessment (RA).
in the initial plan/program? Deepening can only be executed if MOC & RA have been approved by all
involve parties.
91 Sirkulasi pertama Driller's Method baru dimulai namun Casing Pressure Tetap melanjutkan sirkulasi dan JANGAN menurunkan CP. Jika CP dijaga Kick
(CP) sudah mendekati MISICP, apa yang harus dilakukan? agar lebih kecil dari MISICP maka well akan menjadi underbalance dan Tolerance
lebih banyak lagi influx yang masuk.
First circulation of the Driller's Method was just started but the Casing Keep circulating and do NOT decrease CP. If CP is maintained lower than
Pressure (CP) is getting close to MISICP, what should we do? the MISICP, the well will be underbalanced and more influx will flow into
the well.
92 Ketika drilling mendekati casing point ternyata volume kick yang dapat * Reset PVT alarm untuk dapat mendeteksi pit gain lebih dini. Kick
diterima oleh well berkurang. Apa yang dapat dilakukan? * Shut-in sumur jika ditemukan possible kick indicator. Tolerance
While drilling close to the casing point, the kick volume that can be * Reset PVT alarm to detect pit gain immediately.
contained in the well is getting less. What should we do? * Shut-in well on possible kick indicator.
93 Apa yang dimaksud dengan 3S ketika Drilling? * Space out Shut-in
* Shut down pump
* Shut in well
What is 3S while drilling? * Space out
* Shut down pump
* Shut in well
95 Kepada siapa Driller atau crew perlu meminta ijin sebelum menutup sumur TIDAK PERLU MEMINTA IJIN DARI SIAPA PUN --> Driller mempunyai Shut-in
ketika terjadi kick? otoritas untuk segera menutup sumur ketika terjadi kick.
Whom the Driller or crew should asked permission to before shutting in a NO NEED TO ASK FOR PERMISSION --> Driller has the authority to
well on a kick? immediately shut in the well on a kick.
96 Shut in tipe apa yang digunakan di Chevron, hard atau soft shut in? Hard shut in. Shut-in
Which type of shut in is used in Chevron, hard shut in or soft shut in? Hard shut in.
97 Mengapa Chevron menggunakan hard shut in? Karena lebih cepat untuk menutup sumur sehingga meminimalkan volume Shut-in
influx yang masuk ke dalam sumur.
Why does Chevron use hard shut in? Because it is faster to shut in the well thus minimizing the influx volume
into the well.
98 Ketika sedang beroperasi, bagaimana posisi HCR dan choke jika HCR ditutup dan choke juga ditutup. Shut-in
menggunakan Hard shut in?
While operating, what is HCR and choke position when using hard shut in? HCR is closed and choke is also closed.
99 Bagaimana langkah menutup sumur menggunakan hard shut in? Space out agar tool joint di atas floor kemudian tutup Annular BOP dan Shut-in
buka HCR.
What are the steps to shut in the well when using hard shut in? Space out to make sure tool joint is above the floor and then close the
Annular BOP and open the HCR.
100 Jelaskan mengenai 3S ketika sedang tripping. * Pasang FOSV & kemudian tutup. Shut-in
* Space out.
* Shut in well dengan menutup BOP yang paling atas.
Explain 3S while tripping. * Stab in FOSV & close the same.
* Space out.
* Shut in well by closing the uppermost BOP.
101 Apa yang harus dilakukan Driller setelah men-shut in well jika terjadi kick? Memastikan tidak ada kebocoran pada peralatan dan mulai mencatat Shut-in
tekanan di DP dan Casing secara periodik (misal: per 5 menit).
What should the Driller do after shut-in a well when a kick occurs? Make sure there is no leaking on equipments and start to record drill pipe
pressure and casing pressure periodically (example: every 5 min.)
Why do all crews need to stay away from the rotary table when about to To avoid sudden release of trapped gas between the BOP and the Choke
open a BOP after killing a well? line when the BOP is open.
103 Selama operasi killing, BOP ditutup dan string tidak dapat digerakkan Situasi well control lebih beresiko dibandingkan dengan stuck pipe Shut-in
sehingga ada kemungkinan untuk stuck pipe. Apa yang harus dilakukan? sehingga disarankan untuk tidak menggerakkan pipa. Jika pipa digerakkan
maka akan beresiko untuk merusak rubber element pada Annular BOP
sehingga bisa bocor yang berarti situasi menjadi lebih berbahaya lagi.
While killing operation, BOP is closed and string cannot be moved thus Well control situation has more risk compare to stuck pipe thus it is
creating risk of stuck pipe. What should we do? suggested to keep the pipe static. If pipe is moved then it will create a risk
of damaging the rubber element on the Annular BOP and possibility of BOP
leaking that might lead to even more dangerous situation.
104 Data-data apa saja yang perlu dicatat oleh Driller setelah mengetahui Waktu terjadinya kick, jumlah pit gain, SIDPP dan SICP. Shut-in
adanya kick dan men-shut in sumur?
What data needs to be rocorded by the Driller upon identifying a kick and Time of kick, pit gain, SIDPP and SICP.
shutting in the well?
105 Fluida apa yang dapat dipompakan ke dalam lubang ketika terjadi steam Fluida apa saja yang tersedia di lokasi (air, lumpur, brine, etc.) Steam Kick
kick?
What fluid can be pumped into the hole on a steam kick? Any available fluid in the location (water, mud, brine, etc.)
106 Apa yang harus dilakukan untuk mencegah berubahnya brine/drilling mud * Memastikan tekanan hidrostatik di dalam sumur cukup untuk mencegah Steam Kick
menjadi steam? terbentuknya steam --> gunakan Steam Table
* Menjaga agar temperatur di dalam lubang tetap di bawah boiling point-
nya --> dengan meminimalkan static time (waktu di mana lumpur tidak
disirkulasikan) yang dapat menyebabkan temperatur menjadi naik.
What should be done to prevent brine/drilling mud from changing into * Make sure the hydrostatic pressure in the well is high enough to prevent
steam? steam --> use Steam Table
* Maintaining temperature in the well below its boiling point --> by
minimizing static time (time when the mud is not circulated) that would
caused temperature to increase.
Can Annular BOP be used to close on a spiral DC without any leak? If not, No. Spiral DC has profile on its surface that would create leaks when closed
why? with an Annular BOP.
112 Apakah shear ram dapat memotong pipa pada tool joint-nya? Tidak, shear ram hanya dapat memotong pada bagian body pipa. Surface BOP
equipment
Can a shear ram cut a pipe on its tool joint? No, shear ram can only cut pipe on its body.
113 Apa beda FOSV dan IBOP? FOSV: memiliki ball valve, dibuka/tutup dengan menggunakan kunci, dapat Surface BOP
dilalui oleh wireline, tidak dapat mencegah aliran dari dalam string. equipment
IBOP: memiliki stick yang berfungsi untuk menahan valve agar tetap dalam
posisi terbuka, tidak dapat dilalui oleh wireline, mencegah aliran balik dari
dalam string.
What is the different between FOSV and IBOP? FOSV: has a ball valve, open/close with a wrench, wireline can pass through
it, could not prevent flow from inside the well.
IBOP: has a stick to hold the valve to keep it in open position, wireline could
not passed, prevent flow back from the string.
119 Ketika melakukan test BOP, test pressure mana yang dilakukan lebih dulu: Low pressure dulu baru kemudian high pressure. Karena ada kebocoran Surface BOP
high pressure atau low pressure? Mengapa? yang mungkin tertutup jika dikenakan high pressure lebih dulu sehingga equipment
tidak terlihat bocor ketika dilanjutkan dengan low pressure test.
When testing a BOP, which pressure test is performed first: high pressure or Low pressure test first and then high pressure. There are some leaks that
low pressure? Why? might be plugged when exposed to high pressure thus the leaks are not
visible when the test is continued with the low pressure test.
120 Kapan pressure test pada peralatan well control harus dilakukan? * Sebelum spud in atau setelah dipasang. Surface BOP
* Setelah dilepas (disconnect) atau dilakukan perbaikan tapi hanya terbatas equipment
pada peralatan yang diperbaiki saja.
* Tidak melebihi 21 hari.
When does pressure test on well control equipment need to be performed? * Before spud in or after installation.
* After disconnect or repair but only on the affected equipment.
* Not to exceed 21 days.
Which type of bit float valve shall be installed in the string while drilling? CVX Policy stated that Solid Float must be installed during drilling
operation.
125 Ketika sedang mensirkulasikan kick, ditemukan cairan keluar dari weep Gunakan Plasctic Injection untuk memperbaiki seal ram yang bocor. Surface BOP
hole pada Ram BOP. Apa yang harus dilakukan? equipment
When circulating a kick, fluid was found coming out of the weep hole on Use Plastic Injection to temporary fix the leaking seal. Once well is under
Ram BOP. What should be done? control, repair the BOP.
126 Mengapa bloey line pada choke manifold harus lurus (tidak boleh memiliki Untuk meminimalkan friksi dan kemungkinan line bocor karena terkikis Surface BOP
sudut dan berbelok-belok)? oleh pasir yang terbawa oleh gas. equipment
Why does boloey line on a choke manifold has to be straight (no slopes and To minimize friction and posibility of leaksing due to erroded by sand that
turns)? comes with the gas.
127 Alat apa yang harus disiapkan di atas floor jika menggunakan beberapa Cross over yang sesuai dengan ukuran pipa yang dipakai di dalam lubang Surface BOP
ukuran pipa sementara hanya tersedia satu ukuran FOSV dan IBOP? dan FOSV/IBOP. equipment
What tool need to be available on the floor when using some different pipe Cross over that matches different pipe size being used in the hole and
sizes while there is only one size of FOSV and IBOP? FOSV/IBOP.
128 Mengapa salah satu wing valve pada wellhead harus dibuka ketika sedang Untuk mengetahui jika ada kebocoran pada test plug dan untuk mencegah Surface BOP
melakukan test BOP dengan menggunakan test plug? terkumpulnya tekanan di dalam casing jika test plug bocor. equipment
Why does one of the wing valve on the wellhead need to be kept open To identify any leak on test plug and to prevent pressure build up in the
while testing the BOP with a test plug? casing if the test plug leaks
132 Berapa lama pressure harus ditahan ketika test BOP? Minimum 5 menit. Surface BOP
equipment
How long do we need to hold pressure on BOP test? Minimum 5 minutes.
133 Apa yang harus dilakukan jika gas keluar dari mud return line (blow- Shut-in well dan hentikan sirkulasi. Pompakan lumpur ke dalam Mud Gas Surface BOP
through) pada Mud Gas Separator dan mengalir kembali ke mud pit? Separator untuk mengembalikan mud leg sebelum memulai kembali equipment
sirkulasi dengan menggunakan pump rate yang lebih rendah.
What needs to be done if gas comes out from the mud return line (blow-
Shut-in well and stop circulation. Pump mud into the Mud Gas Separator to
through) on a Mud Gas Separator and flow back to the mud pit? re-establish mud leg before restarting the circulation using lower pump
rate.
134 Apa yang dimaksud dengan "well bore pressure assisted" pada BOP? Artinya, pada beberapa jenis BOP, tekanan dari dalam sumur akan ikut Surface BOP
membantu penutupan BOP tersebut. Semakin besar tekanan sumur maka equipment
semakin besar pula gaya yang dihasilkan untuk membantu penutupan BOP
tersebut.
What does "well bore pressure assisted" mean for BOP? It means, on some types of BOP, pressure from the well will assists to close
the BOP. Higher wellbore pressure will result higher force to help closing
the BOP.
135 Bolehkah dilakukan pengelasan, pemotongan, penambalan, melubangi atau Tidak boleh. Penandaan hanya boleh menggunakan dot stamp. Surface BOP
v-stamp pada BOP atau alat penahan tekanan lainnya? equipment
Can we weld, cut, fill, drill or v-stamp BOP or other pressure contain No, you can't. Marking can only be made using dot stamp.
equipment?
136 Apa yang harus diperhatikan ketika akan membuka valve atau peralatan Selalu beranggapan jika dibalik valve atau peralatan tersebut terdapat Surface BOP
lainnya yang digunakan untuk menahan tekanan? tekanan yang dapat membahayakan. equipment
What needs to be awared of when opening a valve or other pressure Always assume there is pressure behind the valve or those equipments that
containment equipment? can be dangerous.
140 Berapakah besarnya tekanan injeksi grease pada double ram di wireline Minimum 20% di atas tekanan sumur. Wireline
operation untuk mencegah masuknya tekanan sumur?
What is the grease injection pressure on the double ram in wireline Minimum 20% higher than the wellbore pressure.
operation to prevent wellbore pressure from coming in?