Documente Academic
Documente Profesional
Documente Cultură
ISO—International of Organi-
zation for Standardiza-
The Technical Working Group (TWG) on Public Utility Vehicle (PUV) Modern-
ization (WG 2) composed of members from the academe, consumer groups, in-
tion
dustry association/manufacturers, professional associations, testing institution,
IEC—International Electro-
research institution and relevant government agencies, developed the Draft Phil-
technical Commission ippine National Standard (DPNS) 2126:2017 Public Utility Vehicles Class 2 and
ASTM— American Society for Class 3 – Dimensions. The TWG on PUV submitted the draft standard to the
Testing and Materials DTI- BPS for consideration and approval as PNS.
BAFS– Bureau of Agriculture
and Fisheries Standards The Philippine National Standard (PNS) was developed to establish a national
TR—Technical Regulation standard to provide dimensions for PUV Class 2 and Class 3 in support of the
TS— Technical Specification PUV modernization program of the Department of Transportation (DOTr). The
PNS 2126:2017 aims to improve the safety and comfort of passengers.
CONTENTS: The PUV Classes 2 and 3 follow the United Nations Economic Commission for
Europe (UNECE) Category M2 Class 1 (more than 22 passengers, with stand-
ing) and, Category M2 Class III (more than 22 passengers, all seated) respective-
Featured Standard I 1 ly. The Class 2 and Class 3 vehicles must conform to the minimum floor-to-
ceiling height of 175cm; a maximum 234cm overall width; and, an overall maxi-
PNS 2
mum length of 700cm.
PNS ASTM 2
PNS BAFS 2 As the National Standards Body of the Philippines, the DTI-BPS approved the
PNS IEC 2 PNS 2126:2017 prepared through a Technical Committee (TC) method.
PNS IEC/TR 4
PNS IEC/TS 4 A copy of the standard may be availed for a minimal fee from the DTI-BPS’
PNS ISO 4
Standards Data Centre at 791.3127 and bps@dti.gov.ph.
PNS ISO/IEC 5
PNS ISO/TS 5
PNS ISO 10123:2017 cess for the visual environment
Adhesives ‐‐ Determina on of
PNS ISO/IEC
(ISO published 2017)
shear strength of anaerobic adhe‐ ICS 91.040.01 PNS ISO/IEC 17011:2017
sives using pin‐and‐collar speci‐ PNS ISO 16893:2017 Conformity assessment ‐‐ Require‐
mens Wood‐based panels ‐‐ Par cleboard ments for accredita on bodies
(ISO published 2013) (ISO published 2016) accredi ng conformity assessment
ICS 83.180 ICS 79.060.20 bodies
PNS ISO 11064‐3:2017 PNS ISO 16895:2017 (ISO published 2017)
Ergonomic design of control cen‐ Wood‐based panels ‐‐ Dry‐process ICS 03.120.20
tres ‐‐ Part 3: Control room layout fibreboard PNS ISO/IEC 17025:2017
(ISO published 2000 with Corrigen‐ (ISO published 2016) General requirements for the com‐
dum 1:2006) ICS 79.060.20 petence of tes ng and calibra on
ICS 13.180 PNS ISO 16984:2017 laboratories
PNS ISO 11226:2017 Wood‐based panels ‐‐ Determina‐ (ISO published 2017)
Ergonomics ‐‐ Evalua on of sta c on of tensile strength perpendicu‐ ICS 03.120.20
working postures lar to the plane of the panel
(ISO published 2000 with Corrigen‐ (ISO published 2003) PNS ISO/TS
dum 1:2006) ICS 79.060.01
ICS 13.180 PNS ISO 17064:2017 PNS ISO/TS 18152:2017
PNS ISO 13609:2017 Wood‐based panels ‐‐ Fibreboard, Ergonomics of human‐system in‐
Wood‐based panels ‐‐ Plywood ‐‐ par cleboard and oriented strand terac on ‐‐ Specifica on for the
Blockboards and ba enboards board (OSB) ‐‐ Vocabulary process assessment of human‐
(ISO published 2014) (ISO published 2016) system issues
ICS 79.060.99 ICS 79.060.20 (ISO/TS published 2010)
PNS ISO 16142‐1:2017 PNS ISO 17212:2017 ICS 13.180
Medical devices ‐‐ Recognized es‐ Structural adhesives ‐‐ Guidelines PNS ISO/TS 20282‐2:2017
sen al principles of safety and per‐ for the surface prepara on of met‐ Usability of consumer products
formance of medical devices ‐‐ als and plas cs prior to adhesive and products for public use ‐‐ Part
Part 1: General essen al principles bonding 2: Summa ve test method
and addi onal specific essen al (ISO published 2012) (ISO/TS published 2013)
principles for all non‐IVD medical ICS 83.180 ICS 13.180 Ergonomics
devices and guidance on the selec‐ PNS ISO 20282‐1:2017
on of standards Ease of opera on of everyday prod‐ PNS ISO/IEC Guide
(ISO published 2016) ucts ‐‐ Part 1: Design requirements
ICS 11.040.01 for context of use and user charac‐ PNS ISO/IEC Guide 63:2017
PNS ISO 16484‐5:2017 teris cs Guide to the development and
Building automa on and control (ISO published 2006) inclusion of safety aspects in Inter‐
systems (BACS) ‐‐ Part 5: Data ICS 13.180 na onal Standards for medical
communica on protocol PNS ISO 27769:2017 devices
(ISO published 2017) Wood‐based panels ‐‐ Wet process (ISO/IEC published 2012)
ICS 35.240.67; 91.040.01 fibreboard ICS 11.020.01
PNS ISO 16817:2017 (ISO published 2016)
Building environment design ‐‐ ICS 79.060.20
Indoor environment ‐‐ Design pro‐
PAGE 6 STANDARDS BULLETIN
BPS Address :
Email Address:
bps@dti.gov.ph
Website:
www.bps.dti.gov.ph