Documente Academic
Documente Profesional
Documente Cultură
Table of Contents
Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Advertisements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
http://www.instructables.com/id/Car-stereo-to-home-stereo-with-a-PSU/
Intro: Car stereo to home stereo with a PSU
I'm going to show you how to run a car stereo using an old PC power supply. If you're bored and want a project, or you're like me and just like making things instead of
going out and buying purpose built ones, this is for you.
If you manage to screw up your stereo, speakers, power supply or anything else, don't blame me.
Also, this is my first Instructable, so it was kind of a learning curve on how this website works.
Image Notes
1. PSU
2. Piece of wire for a jumper
3. Car stereo
4. Electrical tape
5. Wire strippers
6. Speaker wire
http://www.instructables.com/id/Car-stereo-to-home-stereo-with-a-PSU/
Step 2: Wire your PSU
To start, find the large connector on your PSU.
Now, find the green and black wires right next to each other. Put a piece of wire between these as a jumper. This will make the PSU power up when you turn the switch
on.
Image Notes
1. These are the wires you're looking for
Image Notes
1. Put a jumper here
http://www.instructables.com/id/Car-stereo-to-home-stereo-with-a-PSU/
Step 4: Stereo and PSU meet at last
This is where the stereo and power supply meet at last
Find one of the four pin connectors, with the yellow, black and red wires on it
You need a yellow and black wire next to each other
The black ground on your stereo goes to the black wire on the connector
The red and yellow on the stereo go to the yellow wire on the connector
http://www.instructables.com/id/Car-stereo-to-home-stereo-with-a-PSU/
http://www.instructables.com/id/Car-stereo-to-home-stereo-with-a-PSU/
Step 6: Plug it in, power it up
The time has come to test it.
Plug the cord in, and hit the switch, and hope it works.
If you did everything right, it should work fine.
Image Notes
1. Make sure the power switch is OFF before you plug it in
Related Instructables
How to Make
Computer Your Own Car
ATX Powered All-in-One Solar
subwoofer car stereo, and Stereo- Home
UPDATED WITH Off-Grid Party
Car Hubcap system retrofit 3 way speakers Entertainment Sound Systems
Sound System into Jeep and (for home use) A VIDEO by by krimmy
audio upgrade by dan
(video) by jgfresh by hell_raiser_1 JeremyWright
by florlayamp
http://www.instructables.com/id/Car-stereo-to-home-stereo-with-a-PSU/
Advertisements
http://www.instructables.com/id/Car-stereo-to-home-stereo-with-a-PSU/