Documente Academic
Documente Profesional
Documente Cultură
V100R001
White Paper
Issue 03
Date 2017-07-27
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://e.huawei.com
Purpose
E9000 This white paper describes the functions, advantages, appearance, specifications,
networking, standards compliance, and certifications of Huawei's CX320 10GE/FCoE
converged switch module. You can learn about the CX320 by reading this document.
Intended Audience
This document is intended for:
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Change History
Issue 03 (2017-07-27)
The issue is the third official release.
Issue 02 (2017-03-27)
This issue is the second official release.
Issue 01 (2017-03-03)
This issue is the first official release.
Contents
1 Product Overview
1.1 Functions
This topic describes the functions, protocols, and ports of the CX320 10GE/FCoE converged
switch module (CX320 for short).
1.2 Advantages
The CX320 provides high performance and high-density ports and supports flexible PIC
cards. High-performance stacking facilitates deployment and maintenance. It is ideal for large
data center networks.
1.3 Appearance
This topic describes the CX320 in terms of its appearance, panel, and installation positions in
the chassis.
1.4 Ports
This topic describes the features, numbering rules, names, types, and quantity of the CX320
ports.
1.5 Indicators
This topic describes the names, meanings, colors and status of the indicators on the CX320.
1.6 Internal Networking of a Chassis
This topic describes connection relationships between the CX320 and mezzanine cards on
compute nodes.
1.7 Software and Hardware Compatibility
This topic describes mezzanine cards that can work with the CX320 and pluggable modules
and cables supported by ports on the CX320 panel.
1.8 Technical Specifications
This topic describes the physical, environmental, power, and network switching specifications
of the CX320.
1.1 Functions
This topic describes the functions, protocols, and ports of the CX320 10GE/FCoE converged
switch module (CX320 for short).
The CX320 is a switching control unit that provides data switching functionality for compute
node slots in the system and centrally provides service and management ports to connect to
external devices.
The CX320 switch modules are installed in rear slots of an E9000 chassis and are connected
to compute nodes, storage nodes, and management modules through the E9000 midplane. It
exchanges data and control packets in the E9000 chassis and provides high-speed data
transmission.
Table 1-1 describes the functions of the CX320 converged switching plane.
Function Description
ERPS G.8032 v1 or v2
Function Description
MPLS l LDP
l MPLS QoS: Uniform, Pipe, and Short Pipe
Function Description
Function Description
Function Description
FCoE l FCF
l NPV
l FSB
Virtualization NOTE
awareness Only the 10GE switching plane supports this feature.
l Virtualization awareness
l Automatic deployment of policies
l Automatic migration of policies
l NLB cluster association
l Association between one multicast MAC address
and multiple outbound ports
Function Description
Function Description
1.2 Advantages
The CX320 provides high performance and high-density ports and supports flexible PIC
cards. High-performance stacking facilitates deployment and maintenance. It is ideal for large
data center networks.
High Performance, High Port Density, and Support for Flexible PIC Cards
Underpinned by the leading hardware platform, the CX320 provides a high port density and
line-speed forwarding capability. It supports next-generation server applications that require
super high performance and density.
CX320The mainboard provides the following fixed ports: eight 10GE SFP+ optical ports and
two 40GE QSFP+ optical ports for connecting to uplink aggregation or core switches, 32
10GE Ethernet electrical ports for connecting to high-performance compute nodes, one 40GE
port for interconnecting switch modules, and two GE ports for connecting to MM910
management modules. The CX320 provides two PIC slots that support up to eight 10GE/8G
FC unified ports.
The CX320 supports two hot-swappable flexible PIC cards, which provide different types of
ports to meet customers' requirements. Currently the supported PIC card is MX517, which
provides four 10GE/8G FC unified ports.
The CX320 supports low-latency forwarding, 1.3 Tbit/s line-speed switching capacity
(throughput), and Ethernet line-speed forwarding.
1.3 Appearance
This topic describes the CX320 in terms of its appearance, panel, and installation positions in
the chassis.
Appearance
Figure 1-1 shows a CX320.
Installation positions
The CX320 can be installed in one of the four slots at the rear of the E9000 chassis. The four
slots are 1E, 2X, 3X, and 4E, as shown in Figure 1-3.
1E 2X 3X 4E
Panel
Figure 1-4 shows the CX320 panel.
STAT 6
2
HLY
7
3
COM
4
11
2
5 1
10
8
6
12
5
11 Connection status indicator for the 10GE 12 Data transmission status indicator for
optical port the 10GE optical port
NOTE
The numbers on the left of the panel are port numbers. The triangle mark directions indicate the port
positions.
ESNs
An Equipment Serial Number (ESN) is a string that uniquely identifies a server. An ESN is
required when you apply for technical support from Huawei.
No. Description
1.4 Ports
This topic describes the features, numbering rules, names, types, and quantity of the CX320
ports.
The CX320 provides ports for users to operate and configure. The ports are used to send and
receive data.
The CX320 Ethernet ports are numbered in the Slot number/Subcard number/Port number
format.
l Slot number indicates the slot number of the current switch module. The value ranges
from 1 to 4, mapping to slot numbers 1E, 2X, 3X, and 4E.
l Subcard number indicates the number of a subcard with ports. The value ranges from 1
to 22. For details, see Table 1-2, Table 1-3, and Table 1-4.
l Port number indicates the serial number of the port on the subcard. For details, see Table
1-2, Table 1-3, and Table 1-4.
For example, if the CX320 is in slot 2X, the first optical Ethernet port on the upper right of
the panel is numbered 40GE 2/20/2, as shown in Figure 1-7.
1.5 Indicators
This topic describes the names, meanings, colors and status of the indicators on the CX320.
By observing the indicators, you can determine the current operating status of the CX320.
Table 1-5 and Table 1-6 describes the indicators on the CX320 panel.
Figure 1-8 Mapping between the CX320 and mezzanine cards on compute nodes
1E
8 x 10GE
2 x 40GE
10GE
FCF PIC 1
PIC 2
2X
8 x 10GE
2 x 40GE
10GE
FCF PIC 1
Compute Node
PIC 2
Mezz1
3X
8 x 10GE
Mezz2
2 x 40GE
10GE
FCF PIC 1
PIC 2
4E
8 x 10GE
2 x 40GE
10GE
FCF PIC 1
PIC 2
The following describes the mapping between the CX320 switch modules and mezzanine
cards, assuming that the CX320 switch modules are installed in slots 2X and 3X and connect
to Mezz 1.
The MZ510 provides two 10GE ports (ports 1 and 2), which connect to the 10GE switching
planes of the CX320 switch modules in slots 2X and 3X respectively, as shown in Figure 1-9.
Figure 1-9 Mapping between CX320 switch modules and ports on the MZ510
10GE 10GE
Port 1 Port 2
(10GE/FCoE) (10GE/FCoE)
x8 PCIe
MZ510 (Mezz1)
The MZ512 provides four 10GE ports (ports 1 to 4). Ports 1 and 3 connect to the converged
switching plane of the CX320 in slot 2X, and ports 2 and 4 connect to the converged
switching plane of the CX320 in slot 3X, as shown in Figure 1-10.
Figure 1-10 Mapping between CX320 switch modules and ports on the MZ512
10GE 10GE
x8 PCIe x8 PCIe
MZ512 (Mezz1)
MZ312 4–port 10GE dual-chip NIC (Network Interface Card) mezzanine card
SFP electrical Supports the RJ45 port and 1000BASE-T (10/100 Mbit/s is not
module (GE) supported)
Type Specifications
MPO to 4 x DLC Insert the MPO connector to a QSFP+ optical module, and insert
multi-mode fiber the DLC connectors to SFP+ optical modules.
(MMF)
Cat-5e UTP cable Category 5e (Category 5 enhanced) UTP cables that support RJ45
ports
Console cable Supports the RJ45 port and serves as the connection cable for
RS232 serial ports.
CX320 supports multiple pluggable optical modules, fibers, and network cables. You can
choose the modules and cables based on site requirements.
l The CX320 provides the following functions for GE applications:
– Supports SFP electrical modules.
l The CX320 provides the following functions for 10GE/FC applications:
– Provides SFP+ optical ports and supports single-mode and multi-mode SFP+
optical modules.
– Supports DAC cables (10GE). 7 m and 10 m active DAC cables, or 1 m, 3 m, and 5
m passive DAC cables can be used.
NOTE
Color Silver
Weight 2.9kg
Corrosive air l Corrosion rate of the copper test piece: < 300 Å/
pollutant month (in compliance with the ANSI/
ISA-71.04-2013 gaseous corrosion level G1)
l Corrosion rate of the silver test piece: < 200 Å/
month
Packet 960
forwarding rate
(mpps)
Number of 4
stacked devices
Number of 4063
VLANs NOTE
The switch module has 31 reserved VLANs, which are
VLANs 4064 to 4094 by default. This reserved consecutive
VLAN range can be configured.
Number of 128000
Address
Resolution
Protocols
(ARPs) for the
device
Number of 256000
IPv4
forwarding
information
bases (FIBs)
Number of 128000
IPv6
forwarding
information
bases (FIBs)
Virtual Router 64
Redundancy
Protocol
(VRRP)
Number of 4000
broadcast
domains
International Standards
Table 2-1 lists the international standards.
Standard Protocol
IEEE 802.1ad Virtual Bridged Local Area Networks: Provider Bridges (QinQ)
Standard Protocol
Industry Standards
Table 2-2 lists the industry standards.
Organization Standard
GR-929 Reliability
IEC60950 Safety
IEC60825-1/2/6 Safety
IEC60215 Safety
Communication Protocols
Table 2-3 lists the communication protocols.
Protocol Description
Protocol Description
2.2 Certifications
This topic describes the certifications that the E9000 has passed.
Table 2-4 lists the certifications.
America UL UL 60950-1