Documente Academic
Documente Profesional
Documente Cultură
BPL-90
rm ≈ 1 x d1
Description
Pressed bends are designed for building ventilation systems Ød1 nom L Weight
based on spiral and plain ducts. Seam welds provide air (mm) (mm) (kg)
tightness class D without the need to use any other sealants. 80 100 0.3
In ventilation and heat recuperation systems, the double
100 100 0.4
EPDM gasket provides air tightness class D according to EN
12237. The piece is connected with a duct by inserting one 125 125 0.6
into the other. The pressed form of the ventilation piece helps 140 135 0.8
to reduce the flow resistance and the pressure loss. 150 150 0.9
type
Ød1
angle
33
ALNOR® ventilation systems
is a registered trademark protected by a technical patent. All modification rights reserved.