Documente Academic
Documente Profesional
Documente Cultură
Module-1
d4 y d2y
EI P M. (08 Marks)
dx 4 dx 2
b. Derive the maximum bending moment for a beam–column subjected to a central
concentrated load Q. (08 Marks)
OR
2 Derive the expression for critical load of a cantilever column. (16 Marks)
Module-2
3 Derive an expression for the buckling of bar on elastic foundation. (16 Marks)
OR
4 Determine the buckling load of a hinged portal frame when the side sway is prevented. Use
Haarman’s method. (16 Marks)
Module-3
5 Determine the critical load carrying capacity of the column shown in Fig.Q5 using FEM.
(16 Marks)
Fig.Q5
1 of 2
16/17CSE253
OR
6 Determine the buckling load of a pinjointed frame shown in Fig.Q6. Take AE = 12N.
(16 Marks)
Fig.Q6
Module-4
7 Determine the critical value of moment of an I section simply supported and subjected to
bending against lateral buckling. (16 Marks)
OR
8 Determine the buckling load of a simply supported beam of an I section subjected to central
concentrated load. (16 Marks)
Module-5
10 Determine the buckling load for a simply supported rectangular plate subjected to a uniaxial
compression in plane. (16 Marks)
*****
2 of 2