Sunteți pe pagina 1din 5

REFERENTIAL

DRAWING

FOR QUOTATION
USE ONLY
5000 Series Vertical Pumps

Elastomer-Lined or All-Metal
Abrasion/ Corrosion Resistant

Galigher vertical pumps are recognized worldwide


for their dependability. They feature a heavy-duty
construction, long service life and easy
maintenance.

The 5000 Series vertical pumps are offered in a


variety of

materials to match your requirements, combining


flexibility and dependability in abrasive/corrosive
applications.

5000 Series Vertical Pump Features

• Cantilever shaft design


• Double-suction
• Dual volute hydraulics
• Elastomer or metal construction
• Interchangeable mechanical ends
• Heavy-duty bearing assembly
• Easy impeller adjustment
• Integral motor bracket
• Anti-seize impeller threads
• Easy to maintain
• Minimum sump size required
• Suction extension option
• Agitator option
• Pump sizes 1 1/2" through 12"
(40mm though 200 mm)
• Heads to 180 feet (55 meters)
• Capacities to 7,000 USGPM (1,600 m3/hr)

Excelencia en
Soluciones de
Ingeniería
The Best Performance
Cantilever Shaft bearings. The lower bearing is protected from abrasive/corrosive
fluids and destructive corrosive vapors by a specially designed
Galigher’s cantilever shaft design eliminates the need for tapered labyrinth-type grease barrier seal, backed by a lip seal.
submerged bearings, mechanical seals or packing. Shaft The large diameter shaft protects the bearings from excessive
deflection throughout the entire operating range is minimized by vibration and shaft deflection.
using large diameter shafts, rugged pedestals and dual volute
casings. Wet End Parts

Double-Suction The casing, cover plate, impeller and screens are easy to
access and quick to replace in the field. All impellers are
The double-suction, thrustless impeller design prevents air- dynamically balanced to insure proper operation.
locking and balances axial loads on the shaft and bearings. This
design extends wear life and improves pumping efficiency. Impeller Adjustment

Dual Volute Hydraulics The external three-point impeller adjustment is a feature on all
pump sizes. A unique impeller-to-shaft anti-seize thread means
A unique dual volute casing balances radial forces on the easier impeller disassembly.
impeller while minimizing shaft and bearing loads.
Abrasive/corrosive fluids are pumped out through a single Motor Bracket
discharge pipe.
The motor bracket is mounted on the bearing column,
Materials of Construction eliminating the need to realign the motor and sheaves when
adjusting impeller clearances.
Galigher 5000 Series Vertical Pumps are supplied in a variety of
elastomers to meet service requirements. Abrasion-resistant Suction Extensión
models are lined inside. Acidresistant models are lined inside
and outside. All-metal pumps are constructed of cast or high A suction extension pipe is available as an option. The pipe is
chrome iron. installed between the casing and lower screen and extends
toward the bottom of the sump. It is available in lengths to 5 feet
Mechanical Ends and fits on all pump sizes.

Each pump size may be fitted with one of several mechanical Agitator Option
ends to accommodate head requirements. These mechanical
ends are designed for high, médium and low head applications. The optional Galigher Agitator attaches to vertical slurry pumps
to solve sanding-in problems. Constructed of heat treated, 600
Heavy-Duty Bearing Assembly Brinell, high-chrome iron, this tough, wear-resistant workhorse
quickly bores its way through packed solids by creating a
The mechanical end on Galigher 5000 Series Pumps uses a turbulent swirling actino around the pump inlet.
combination of heavy-duty, tapered roller and cylindrical roller

5000 Series Vertical Pump Operating Ranges


Weir Minerals™ Excelencia en
South America Soluciones de
Ingeniería
San José 0815, San Bernardo. Tel: +56 2 754 2200
Santiago of Chile Fax: +56 2 879 99 59
www.weir-vulco.cl ventas@weir-vulco.cl

Copyright . Weir Slurry Group Inc 2003 (eacg 2004)

S-ar putea să vă placă și