Documente Academic
Documente Profesional
Documente Cultură
The Mechanical Engineering Department of the Institute since 1965 has produced so
many technocrats who are serving the country. The department has been involved with many
research works and projects. Needless to say it is presently associated to different research and
development activities resulted a couple of patents filed. Some of the faculty members are
coordinating different technical bodies of the State, Tripura and the region. Numerous projects
at State as well as National level are secured from different funding agencies and organize the
short term courses in different fields of engineering and technology. The Department has
organized conferences at national level too. The Department of MechanicalEngineeringintakes
90 (Ninety) students per year in the first semester of the four year Degree course, besides
consignable numbers of PhD students the department is hoisting three programs at PG level.
The Department has 29(twenty-nine) nos. of faculty members. Among them 1(one)
Professor, 5(five) numbers of Associate Professors, and rest areAssistant Professor. All the
faculties are involved with different consultancy, research and developmental works along
administrative activities of the Institute.
Academic Program:
Students on Roll:
Programme 1st Year 2nd Year 3rd Year 4th Year Total
B. Tech. 80 96 97 93 366
M. Tech 39 48 -- -- 87
Ph. D. 30
Total -- -- -- -- 483
Lab Facilities:
Laboratories (Existing):
Refrigeration &
1 Air Conditioning 30 20 3 4
4
Lab.
Thermal Power
2 30 20 3 6
lab. 6
5 Vibration Lab 40 20 3 6
6
Heat Transfer
6 50 20 7 7
Lab 7
Fluid Machinery
9 100 20 3 4
Lab 4
10 Computational 40 20 3 3
3 ------
Lab - 1
11 Computational 100 40 3 10
10
Lab - 2
12 Tribology Lab 30 20 3 2
2
13 CAD CAM Lab 40 20 3 7
7
14 FMS Lab 40 20 -- --
--
15 SO
OM Lab 40 20 3 8
8
Wind
W Tunnel
16 40 20 3 6
Laab 6
I.C Eng
gine Lab witth Newly In
nstalled Eng
gines
4 Cylinder Gasoline En
ngine Plasma F
Fuel Reform
mer
IDI Enginne
Major Up
U gradatio
on in Weldin
ng Shop
Arc
A Welding Machine
Induction Welding
W Macchine Friction Stir Weldingg Machine
Major Up
U gradatio
on in Machiine Shop
Major Up gradatio
on in Tribollogy Lab
Scraatch Tester
Dry
D Abrasion
n Tester Gas Chrromatographh
Laboratory Activitties.
Sm
mithy Shop
Carpeentry Shop
Macchining Shoop
Departm
mental Activvities
Facilitation of
o the Dignitariies.
DEPAR
RTMEN
NTAL FA
ACULTY
Y PROFIL
LE (ME DEPART
TMENT
T)
H.O.D:Dr. Sw
wapan Bh
haumik
Sl.
Name Designation Qu
ualification Fieelds of intereest/Specializzation
No
BE(C.U.)
M.Tech, Design (IIT
Dr. Prasun Associate Tribology, Bio Tribology, Energy Transfer,
2. Delhi)
Chakraborti, FIE Professor District Heating System, Thin Film
Ph.D.(IIT KGP) lubrication
BE(C.U.)
Dr.Swapan Associate Heat Transfer, Fluid Mechanics,
3. MME(J.U)
Bhaumik, FIE Professor Refrigeration & Air Conditioning Thermal
Ph.D.(IIT Roorkee) Power.
BE(REC Surathkal)
Computational fluid
M.Tech(IIT Chennai)
Dr. Ajoy Kr. Das, Associate Dynamics(CFD),Aero/Gas dynamics,
4. Ph.D.(IIT KGP)
FIE Professor Computational heat transfer, Thermal
Power
B.Tech(NERIST),
Shri. Abhik Assistant
9. C.F.D. Two phase flow, Heat Exchanger
Majumder Professor
M Tech (IITK)
Shri.
R.K.Bhogendro Assistant
18. M.Tech (NITTTR, Kol) Manufacturing Technology, Drawing ,
Meitei Professor AutoCad , Welding
1 Dr. Swapan Bhaumik 30th National Convention of Chemical Sept. 05-07, 2014
Engineer and National Seminar on
RTRDICI2014
2 Dr. Swapan Bhaumik 28th National Convention of Textile March 07-08, 2015
Engineer and National Seminar on “
Technological Innovations, Design, and
Sustainable Product Development in
Handloom and Textile Industry”
3 Dr. Swapan Bhaumik Seminar on “Research Methodology” 3rd February,
Where PADMASRI Prof. B. L. 2015
Deekshatulu, Distinguished Fellow,
IDRBT Hyderabad & Chairman, BoG
College of Engineering JNTUH,
Hyderabad delivered the speech as
Expert Speaker
NIL
Workshop
March (13-14),
1. Advances in Manufacturing Technology 2015
Dr. G. Ravi KiranSastry
and Mechatronic Systems
1 Mr. Barnik Saha Roy Introduction to Comsol Multiphysics 5.0 20-21st March
2015
2 20-30th May,
Two week ISTE workshop on Fluid Mechanics (Under national 2014
Dr. G. Ravi KiranSastry
mission on education through ICT [MHRD] &IIT KGP).
Conference
1 Dr. PrasunChakrabarti Optimization of multi objective problem by taguchi approach and 10th August
utility concept when turning aluminium 6061 2014
2 06-07
Dr. Swapan Bhaumik, The Effect of Coating Thickness and Roughness of Nucleate Pool
September,
Boiling Heat Transfer on Nanoparticle Coated Surface.
2014
3 19 - 21
Dr. PrasunChakrabarti Transient CFD Analysis Of 3-Lobe Bearings at 60000 and
December,
considering various roughness parameters rpm for A Gas Turbine
2014
4 Effect of Corner Radius of a T-Junction Mini-square Channel on 19 - 21
Abhik Majumder Fluid Flow and Heat Transfer in the Developing Region: A Three December,
Dimensional Numerical Simulation 2014
5 12th-14th
Subrata Kumar Ghosh Selective Laser Sintering: A Case Study of Tungsten Carbide and
December,
Cobalt Powder Sintering by Pulsed Nd:YAG Laser
2014
6 1st-12th
Arindam Majumder Modeling flow-shop scheduling using back-propagation neural
December
networks with gradient descent, Quasi-Newton and L-M algorithms
2014
7 Barnik Saha Roy Thermal Modeling & Effect of Process Parameters in Friction Stir 14-15th
Welding” March, 2015
8 Dr. G. Ravi The 12th International Conference on Combustion & Energy 29th Sept to
KiranSastry Utilisation – 12ICCEU 3rd Oct 2014
9 Dr. Ajay Biswas
“XIII International Conference on Mechanical Engineering Design January, 23-
and Analysis (ICMEDA 2015), 24, 2015
Sl.
Name of Faculty Country Visited Date Purpose of Visit
No.
Tripura State
1 Dr. Swapan Bhaumik Chairman, 2013-2015
Centre, IEI
Rotary Club
2 Dr. Swapan Bhaumik Secretary of Agartala July,2014-June,2015
City
Bhawans’
3 Dr. Swapan Bhaumik Member, BOG College of 2014
Science &
Technology,
Tripura
Expert member,
Tripura
4 Dr. Swapan Bhaumik Recruitment 2014-2015
University
Board
6
Abhik Majumdar ISHMT
7
Dr. Ajoy Biswas The Institution of Engineers (India)
Sl. Title
Name of Faculty Industry Amount
No
Ankuran Saha, Pankaj Kumar
PWD (R & B) , Vanghmun
1 Das & other Faculties of M.E Testing of TMT Bars 15892.00
North Tripura
Department
RAMKY
Ankuran Saha, Pankaj Kumar
INFRASTRUCTURE LTD
2 Das & other Faculties of M.E Testing of TMT Bars 23596.00
Department
Publications:
RESEARCH PUBLICATIONS:
Arindam Study the Influence of Heat Indian January, 2015 Volume 48 No. 1
1 Majumder, Input on the Shape Factors Welding
Joydeep Roy, R. and HAZ width during Journal.
N. Rai, S. C. Submerged Arc welding
Saha
18 Madhujit Deb, Arindam A Taguchi-fuzzy based Internatio 3rd December Volume 39,
Majumder, Rahul Banerjee, multi-objective optimization nal 2014 Issue 35,
G.R.K. Sastry, P.K. Bose, study on the soot-NOx- Journal of Pages
BTHE characteristics of an Hydrogen 20276-
existing CI engine under dual Energy 20293
fuel operation with hydrogen (Elsevier)
19 Jibitesh Kumar Panda, Performance and Emission Internatio April, 2014 Vol:3,Page
VemparalaGopala Krishna Analysis of Compression nal s: 1270-
Ignition Diesel Engine With Journal of 1273
G. R. K Sastry Diesel Additives and Mahua Engineeri
Biodiesel ng
Research
&
Technolog
y (IJERT)
20 Ajay Kumar Das, Sumit Development and validation Applied 2015 vol. 140,
Roy, Rahul, Banerjee, A of a GEP model to predict the Energy pp. 52-64
Ghosh performance and exhaust
emission parameters of a
CRDI assisted single cylinder
diesel engine coupled with
EGR
21 Ajay Kumar Das, Sumit A TMI based CNG dual fuel Journal of 2014 vol. 20, pp.
Roy, Rahul, Banerjee, P.K approach to address the soot– Natural 221-240
Bose NOx–BSFC trade-off Gas
characteristics of a CRDI Science
assisted diesel engine – an and
Engineeri
EPA perspective ng
22 Ajay Kumar Das, Sumit Development of an ANN Journal of 2014 vol. 21, pp.
Roy, Rahul, Banerjee, P.K based system identification Natural 147-158
Bose tool to estimate the Gas
performance-emission Science
characteristics of a CRDI and
assisted CNG dual fuel diesel Engineeri
engine. ng.
23 Ajay Kumar Das, Sumit Application of Grey–Taguchi Journal of 2014 vol. 21, pp.
Roy, Rahul, Banerjee, based multi-objective Natural 524-531
optimization strategy to Gas
calibrate the PM–NHC– Science
BSFC trade-off and
characteristics of a CRDI Engineeri
assisted CNG dual-fuel ng.
engine
24 Ajay Kumar Das, Sumit A comparative study of GEP Journal of 2014 vol. 21, pp.
Roy, Rahul, Banerjee, A and an ANN strategy to Natural 814-828
Ghosh model engine performance Gas
and emission characteristics Science
of a CRDI assisted single and
cylinder diesel engine under Engineeri
CNG dual-fuel operation ng.
25 Ajay Kumar Das, Sumit ANN meta-model assisted Journal of 2014 vol. 21, pp.
Roy, Rahul, Banerjee, P.K Particle Swarm Optimization Natural 1156-1162
Bose of the performance-emission Gas
trade-off characteristics of a Science
single cylinder CRDI engine and
under CNG dual-fuel Engineeri
operation ng.
27 Ajay Kumar Das, P. Dey. Steady flow over triangular Ain 2015
extended solid attached to Shams
square cylinder – A method Eng
to reduce drag Journal
cylinder, Science
and
Technolog
y, an
Internatio
nal
Journal
29 Ajay Kumar Das, P. Dey. Numerical prediction and Journal of 2015 Accepted
enhancement of unsteady Applied
forced convection over Fluid
circular cylinder using CFD Mechanic
and ANN s
30 Ajay Kumar Das, P. Dey, A. Prediction of unsteady mixed Journal of 2015 Vol-
Sarkar convection over circular Naval 12(1):Page-
cylinder in the presence of Architectu 57-71.
nano-fluid - A comparative re and
study of ANN and GEP Marine
Engineeri
ng
35 Abhishek Paul, Effect of compressed natural Energy 15 April 2014 Volume 68,
RajSekharPanua, gas dual fuel operation with (Elsevier) , Pages
DurbadalDebroy, Probir diesel and Pongamiapinnata 495-509
Kumar Bose methyl ester (PPME) as pilot
fuels on performance and
emission characteristics of a
CI (compression ignition)
engine
36 Abhishek Paul, Probir Study of performance and Journal of February 2015 Volume 88,
Kumar Bose, RajSekhar emission characteristics of a the Issue 1,
Panua, Durbadal Debroy single cylinder CI engine Energy Pages 1-10
using diethyl ether and Institute
ethanol blends
1 5th IRF International Goa india Dr. Prasun Chakrabarti, 10th August
conference KishanChoudhury 2014
2 International conference National Institute of Dr. 21st – 24th
on advances in Technology, Calicut, PrasunChakrabarti,MoutoshiSing February, 2014
Tribology, ICAT 2014 Kerala ha Roy, Pankaj Kumar Das,
Bishop Debbarma
3 Ninth International University Center Dr. PrasunChakrabarti, 12-14 March
conference on Design Chicago, Chicago, USA 2015
principles and practices
4 5th International and 26th IIT Guwahati Subrata Kumar Ghosh, 12th-14th
AIMTDR conference, Alokkumar Das, SojiramMeena, December, 2014
ParthaSaha
5 2nd international College of Engineering SatadipGhosh, Subrata Kumar 3rd-4th January,
conference on Advances and Management Ghosh and MeghanshuVashista 2015
in Mechanical Kolaghat, West Bengal
Engineering and its
interdisciplinary areas
Mechanical Engineering
Design and Analysis
(ICMEDA 2015),
18 XIII International Singapore Ajay Biswas March 29-30,
Conference on Materials, 2015
Mechanical and
Industrial Engineering
(ICMMIE 2015)
19 The 15th International Kyoto, Japan Sudev Das and Swapan Bhaumik August 10-15,
Heat Transfer 2014
Conference (IHTC15)
20 The 10th International Dhaka, Bangladesh Sudev Das, DubbaSantosh Kumar June 20-22, 2014
Conference of and Swapan Bhaumik
Mechanical Engineering
(ICME2013)
1 Subrata Kumar Ghosh, Selective Laser Sintering: A Case 2015 Page No. 441-459
Alokkumar Das, Partha Study of Tungsten Carbide and
Saha Cobalt Powder Sintering by Pulsed
Nd: YAG Laser. ( Book Chapter of
Lasers Based Manufacturing, Topics
in Mining, Metallurgy and Materials
Engineering)
2 Sumit Roy, A. K. Das, Potential of EGR and CNG on 2015 ISBN: 978-3-659-
P. K. Bose performance and emissions of a 69002-0;
CRDI engine. (Lambert Academic
Publishing)
PADMASRI Prof. B. L.
Delivered the speech as
Deekshatulu, Distinguished
Expert Speaker in
Fellow, IDRBT Hyderabad
1 3rd February 2015 Seminar on “Remote
& Chairman, BoG College
Sensing and Its
of Engineering JNTUH,
Application”.
Hyderabad --
SL.NO EVENTS
DIGNITARIES PRESENT
Venue: Institution Building, P.N. Complex, 2. Er. TapanLodh, FIE, Chairman, Civil Engineering
Agartala. Division, The Institution of Engineers (India),
Tripura State Centre presided over the programme.
13. Opening of “IRC OUTLET AT AGARTALA” 1. Er. Sunil Bhowmik, FIE, Engineer-in-Chief,
Public Works Department, Govt. of Tripura&
20th July, 2014 President, Indian Roads Congress (IRC), New
Delhi has Inaugurate the IRC OUTLET at
Venue: Institution Building, P.N. Complex, Institution Building.
Agartala. 2. Mr. S.D. Sharma, FIE, Executive Director,
National Building Construction Corporation Ltd.,
Mass Rally:
Blood Donation:
23. Opening of Disaster Management Cell of the 1. Shri Ashok Kumar Basa, FIE, President, The
Institution of Engineers (India) Tripura State Institution of Engineers (India)has Inaugurated the
Centre Branch at NIT Agartala Premises. Disaster Management Cell.
5th December, 2014 2. Dr. R.P. Sharma, FIE, Director (I/C), NIT Agartala
has delivered the speech to grace the seminar as
Venue: Visvesvaraya Auditorium, NIT Chief Guest.
Agartala.
3. Dr. Ratul Das, Head, Civil Engineering
Department, NIT Agartala has deliver the lecture as
Keynote Speaker.
26. Lecture Programme on “Entrepreneurship 1. Mr. A.S Karanth, Mr. Yajnanarayana Kammaje,
Awareness and Development”. Mr. Anil Mutha have delivered the lecture as
Expert Speaker.
28th January, 2015
Venue: Institution Building, P.N. Complex, 2. Er. J.P. Singh, FIE, Chief Engineer (Retd.),
Agartala. Military Engineering Service has delivered the
lecture as Expert Speaker.