Documente Academic
Documente Profesional
Documente Cultură
METAL ROOFING
10
www.bilka.com 01
Residential Catalogue
BILKA CLASIC
The CLASIC metallic tile is profiled in steel with a thickness between 0.40 and 0.60 mm, zinc-coated
(Z225-Z275), covered with a layer of glossy or matte paint. This type of metal roofing is the most
widely used, it is similar to classical tiles, and is used especially in residential buildings.
} The CLASIC metallic tile is produced in a wide range of glossy and matte color shades.
Metal roofing panels are available in lengths between 500 mm and 7000 mm. For very long roof
slopes, where the covering with a single tile panel is not recommended, two or more metal roofing
panels must be used. This requires the calculation of the bottom panels as a multiple of tiles, taking
into account the technical overlap of 150 mm.
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
TECHNICAL CHARACTERISTICS
Total width 1200 mm
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat
brown brown brown
BILKA BALCANIC
The BALCANIC metallic tile is profiled in steel with a thickness between 0.45 and 0.60 mm, zinc-
coated (Z225-Z275), covered with a layer of glossy or matte paint.
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
Module height 20 mm
Total width - 1180 mm
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat
brown brown brown
*Color shades may differ from the real ones. In order to be sure, do not hesitate to ask the color chart from the BILKA representative.
02
Metal Roofing
BILKA IBERIC
The IBERIC metallic tile is profiled in steel with a thickness between 0.45 and 0.60 mm, zinc-coated
(Z225-Z275), covered with a layer of glossy or matte paint. The IBERIC metal tile can be delivered
with lengths between 500 mm and 7000 mm.
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
TECHNICAL CHARACTERISTICS
Total width 1180 mm
Module height 25 mm
Total height 47 mm
Total width - 1180 mm
Weight per area 4 - 5 Kg / m²
Usable width - 1080 mm
Warranty for glossy finishing 10-year warranty for color characteristics and corrosion
47 mm 25 mm
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat
brown brown brown
BILKA GOTIC
The GOTIC metallic tile is profiled in steel with a thickness between 0.45 and 0.60 mm, zinc-
coated (Z225-Z275), covered with a layer of glossy or matte paint. The GOTIC metal tile can be
delivered with lengths between 500 mm and 7000 mm.
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
Module height 25 mm
Total height 47 mm
Total width - 1180 mm
Usable width - 1100 mm Weight per area 4 - 5 Kg / m²
Warranty for glossy finishing 10-year warranty for color characteristics and corrosion
47 mm
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat
brown brown brown
*Color shades may differ from the real ones. In order to be sure, do not hesitate to ask the color chart from the BILKA representative.
www.bilka.com 03
Residential Catalogue
BILKA ROMANIC
The ROMANIC roof tiles are made of zinc-plated (Z225-Z275) shaped steel sheet with thicknesses
between 0.50 and 0.60 mm, coated with a single layer of glossy or matte paint. The ROMANIC
metallic roof tiles can be delivered with lengths between 500 mm and 7000 mm.
} The ROMANIC metallic roof tiles are manufactured in a wide range of colour shades.
This is a product that distinguishes itself by its 30 mm high profile. Due to its style and durability, this
model can be used for new constructions, but also for historic monuments or Roman style
constructions hundreds of years old.
The innovative joining system allows the overlapping of the roof tile modules on both sides,
significantly simplifying the installation process and reducing installation costs.
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
TECHNICAL CHARACTERISTICS
Total width 1140 mm
Module height 30 mm
Warranty for glossy finishing 10-year warranty for color characteristics and corrosion
62 mm
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat
brown brown brown
} Also, RETRO PANEL can be used to cover office buildings and shopping centers without
interfering negatively on the aesthetic aspect of the building.
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
23mm
25mm
Weight per area 4 - 5 Kg / m²
3mm
3.5mm
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
3mm
16mm
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat
brown brown brown
*Color shades may differ from the real ones. In order to be sure, do not hesitate to ask the color chart from the BILKA representative.
04
Metal Roofing
} For very large water lengths the panels are folded on site, with special equipment following the
prior consultation of the BILKA technical consultant.
The BILKA folded sheet metal allows a roofing with a minimum slope of 3⁰ and is produced in 12
colours for the PLX special Swedish steel manufactured by SSAB producer.
} As an alternative DX51D steel sheet can be used, which is available in a wide range of colours, with
matte and glossy finishing.
25mm
Warranty for glossy finishing 10-year warranty for color characteristics and corrosion
Usable width - 550 mm
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Total width - 570 mm
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat
brown brown brown
SSAB
SSAB COLOR RANGE
RAL 9010 RAL 9006 RAL 7011 RAL 8003 RAL 3009 RAL 3011
white silver grey brass brownish-red red
(001) (045) (087) (778) (758) (769)
RAL 8004 RAL 3005 RAL 6020 RAL 8017 RAL 9005 RAL 8019 *Color shades may differ from the real ones. In order to be sure, do not hesitate to ask the color chart from the BILKA representative.
brick-red cherry-red green brown black dark brown
(742) (781) (830) (434) (015) (387)
www.bilka.com 05
Residential Catalogue
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
TECHNICAL CHARACTERISTICS
Total width - 1200 mm Total width 1200 mm
Usable width - 1180 mm
Usable width 1180 mm
Corrugation height 8 mm
Warranty for glossy finishing 10-year warranty for color characteristics and corrosion
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024 Palisander
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat GOLDEN
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005 Palisander
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat ANTICATO
brown brown brown
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
Corrugation height 18 mm
Warranty for glossy finishing 10-year warranty for color characteristics and corrosion
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024 Palisander
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat GOLDEN
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005 Palisander
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat ANTICATO
brown brown brown
*Color shades may differ from the real ones. In order to be sure, do not hesitate to ask the color chart from the BILKA representative.
06 05
Metal Roofing
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
TECHNICAL CHARACTERISTICS
Total width 1100 mm
Warranty for glossy finishing 10-year warranty for color characteristics and corrosion
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024 Palisander
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat GOLDEN
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005 Palisander
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat ANTICATO
brown brown brown
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
Warranty for glossy finishing 10-year warranty for color characteristics and corrosion
Warranty for matte finishing 15-year warranty for color characteristics and corrosion
Warranty for GrandeMat finishing 30-year warranty for color characteristics and corrosion
RAL 3000 RAL 3005 RAL 3009 RAL 3011 RAL 5010 RAL 6005 RAL 7024 RAL 3005 RAL 3009 RAL 6020 RAL 7024 RAL 3005 RAL 3011 RAL 6005 RAL 7024 Palisander
candy apple cherry brownish red blue green grey cherry brownish green grey GrandeMat GrandeMat GrandeMat GrandeMat GOLDEN
red red red red red
RAL 8003 RAL 8004 RAL 8017 RAL 9002 RAL 9005 RAL 9006 RAL 8004 RAL 8017 RAL 8019 RAL 9005 RAL 8004 RAL 8017 RAL 8019 RAL 9005 Palisander
brass brick-red chocolate white black silver brick-red chocolate dark black GrandeMat GrandeMat GrandeMat GrandeMat ANTICATO
brown brown brown
*Color shades may differ from the real ones. In order to be sure, do not hesitate to ask the color chart from the BILKA representative.
www.bilka.com 07
Residential Catalogue
GrandeMat
08
Metal Roofing
GrandeMat
Discover the premium finish from BILKA, with 30 years warranty!
GrandeMat is the newest finish from BILKA range, providing top performance for a top roof.
The elegant and modern appearance combines with the high resistance of steel covered with 50
μm paint, for an excellent product and resistant roof.
The product quality will be recognized in time, expecially by the 30 years warranty, provided for
colour and corrosion characteristics.
The GrandeMat finish is available in 8 colours for the CLASIC, BALCANIC, GOTIC, IBERIC,
ROMANIC, RETRO PANEL and folded metal sheet models.
} GrandeMat may also be shaped as corrugated sheet with different sizes of the profile and can
be used on roofs and walls, as well.
Material Steel sheet zinc-plated on both sides and protected with a polyester coating
Paint layer 50 µm
UV resistance RUV4
Weight 5 Kg / sqm
GOTIC Warranty 30-year warranty for color and corrosion characteristics
RAL 8019
Estimated life cycle 60-year lifespan for the roof, resistance to remperature variations
GrandeMat
GrandeMat Shades
COLOR RANGE
www.bilka.com 09
10
RAINWATERSYSTEM
RAINWATER SYSTEM - GENERAL DESCRIPTION
30YEARS CORROSION
The BILKA rainwater system is made of hot galvanized steel, with 15 YEARS COLOR
EE
multilayer protection on both sides for a perfect behavior in time.
5 A NT
The element joining system is simple, fast and efficient, does not allow AR
rainwater to pour down the facade or to infiltrate in the house GU
foundation and walls, thus protecting the whole building and ensuring
a higher useful life. 1
The production of the BILKA system elements is based on the Swedish
technology, using high-quality Swedish steel (0.6 mm thick), galvanized 2
on both sides (275 g/sqm) and covered with Prelaq Nova (2x50 microns). 4
} The Prelaq Nova layer confers products a special surface
smoothness, high color stability and solid resistance to rainwater
and atmospheric pollutants. 3
The five layers building and protecting the metal band ensure that
each element is corrosion-proof and provide an extended useful life of
such products.
5
This is why the BILKA system guarantees very long-term resistance,
whereby the only maintenance operation required resides in the
cleaning of the gutters.
1 2 3 4 5
Use Exterior -
Surface thickness 50 µm / 50 µm ISO 2808
Surface thickness tolerance 6 µm EN 10169-1
Varnish 1T (dark) – 2T (bright) EN 13523-2
Minimum internal bending radius 40 EN 13523-7
Minimum formation temperature + 15°C -
Impact resistance 8 EN 13523-5
Hardness HB-F EN 13523-4
Maximum working temperature + 100°C -
UV Category RUV3 prEN 10169-2
Corrosion resistance category RC4 prEN 10169-2
Color variation + 100°C -
RAL 9010 RAL 9006 RAL 7011 RAL 8003 RAL 3009 RAL 3011 The size and color options enable the achievement of the most
white
(001)
grey
(045)
graphite
(087)
brass brownish red
(778) (758)
red
(769)
} appropriate individual combinations and the matching with the roof
color.
RAL 8004 RAL 3005 RAL 6020 RAL 8017 RAL 9005 RAL 8019
brick-red cherry-red green chocolate black dark brown
(742) (781) (830) brown (015) (387)
(434)
COLOR RANGE
ALUZINC
*Color shades may differ from the real ones. In order to be sure, do not hesitate to ask the color chart from the BILKA representative.
www.bilka.com 11
Residential Catalogue
1 Gutter
Section
150 mm
125 mm
Lenght
2000 mm
4000 mm
2 Downpipe
Section
100 mm
90 mm
Lenght
3000 mm
4000 mm
3 Corner
Inner / Outer
Section
150 mm
125 mm
Angle
90⁰
12
Metal Roofing
Section Section
100 mm 150 mm
90 mm 125 mm Section
150 / 100 mm
Lenght Lenght 125 / 90 mm
1000 mm 210 mm
160 mm
Section
150 mm
125 mm Section Section
100 mm 100 mm
Lenght 90 mm 90 mm
210 mm
www.bilka.com 13
Residential Catalogue
3
RIDGE CLOSURE
It seals and at the same time prevents the birds’
access.
Ridge Closure
4
RIDGE CAP
It seals and at the same time prevents the birds’
access.
Ridge Cap
15mm
5 15mm
193mm m
193m
VALLEY
It is mounted under the cover at the junction of two
Valley slopes and it directs the water towards the
rainwater system.
113 mm
6
mm
120
80
mm
15
7 9
mm
15
142mm
WALL BORDER
93 mm
8 10
100mm
mm
20
mm
GABLE BORDER
15
14
Metal Roofing
11 14
0
m
m
convex
80 mm
It is used in areas where
m
roof slopes change their
m
90
mm
pitch. 15
mm m
15 145 m
Slope Breaking
15 mm
12
SNOW STOPPER
It is assembled on the cover
3
and prevents snow slides off
the roof.
Snow Stopper
13
OMEGA SNOW STOPPERS
It is an alternative to conventional snow
stoppers.
14
FUNNEL SET
It is mounted at the base of the
funnel and it prevents water to
seep in along the funnel walls.
16 15
BITUMEN TAPE UNDER GABLE FLASHING
Flexible self adhesive waterproofing tape, This element is used to prevent water infiltration if
recommended for insulation and anti-moisture the eaves are not positioned at right angles to the
protection. gable line.
17 18
UNIVERSAL SEALING TAPE WOODSCREW
It is used on the valley and under the ridge. It fastens the sheet plates and accessories on the
It has a sealing role. wood lath.
* Any other sheet-metal works are available upon request. For details, please do not hesitate to contact your BILKA representative.
www.bilka.com 15
Residential Catalogue
ANGULAR RIDGE
Angular Ridge It closes the roof to the top at the intersection of
two slopes, acting as a shield against seepage.
2 135
HALF-RIDGE
It closes the roof at the top and
prevents seepage under the
cover. It is used for one slope
roofs.
Half-Ridge
RIDGE SUPPORT
Ridge Support It is mounted under the angular ridge in order to
facilitate and mask the ridge fastening points.
4 193
193
VALLEY
It is mounted under the cover at the junction of two
Valley slopes and it directs the water towards the
rainwater system.
6 25mm
7
5
12
SMALL RAIN SHADOW BORDER
It connects to the drainage
system allowing water to drain 60
8 9
SIDEWALL BORDER HORIZONTAL WALL BORDER
It is used at the intersection of the It is used at the intersection of
slopes with fire walls, dividing walls. the slopes with fire walls,
It prevents water to seep on the dividing walls. It prevents water
wall. to seep on the wall.
16
Metal Roofing
10
GABLE BORDER
It closes the sides of the roof
covering the roof structure
edges. It is assembled over the
fascia board, after the
fastening of the tile plates.
Gable Border
11
OVERLAPPING ELEMENT
It is used to join two Retro Panel sheets if the
Overlapping Element roof is longer and requires the use of two
panels.
12
SNOW STOPPER
It is assembled on the cover and prevents snow
slides off the roof.
Snow Stopper
13
UNIVERSAL SEALING TAPE
It is used on the valley and under the ridge.
It has a sealing role.
14
13
7m
m
150
mm
25 m
Concave Slope Breaking CONCAVE AND CONVEX m
SLOPE BREAKING
It is used in areas where
roof slopes change their
pitch.
187m
m
10
0mm
25
m
m
15
BITUMEN TAPE
Flexible self adhesive waterproofing tape,
recommended for insulation and anti-moisture
protection.
Bitumen Tape
16
WOODSCREW
It fastens the sheet plates and accessories on
the wood lath.
Woodscrew
* Any other sheet-metal works are available upon request. For details, please do not hesitate to contact your BILKA representative.
www.bilka.com 17
Residential Catalogue
ANTI-CONDENSATION FILM
The anti-condensation film lets vapors out but does not let moisture in, thanks to its two sides that provide additional protection for the roof.
An anti-condensation film protects the roof boarding, rafters and the thermal insulation material against possible water seepage that could get under the
cover and facilitates the guiding of such seepage towards the gutters.
Depending on the roof type and the specialist's recommendation, you can choose from six BILKA foil types:
Diffusion roof foil, in the economic category, three layered: one special It is a diffusion foil under the covering for a simple ventilated roof. It is
diffusion membrane between two layers of polypropylene. No need for assembled freely hanging, directly on the rafters or on the roof boarding in
ventilation layer between the foil and the thermal insulation. roofs with a slope above 25 degrees, for normal thermal loads.
CHARACTERISTICS
CHARACTERISTICS
Specific Temperature Waterproofing
Specific Weight Tensile Strenght Waterproofing Degree Material Tensile Strenght
Weight Resistance Degree
TECHNICAL
TECHNICAL
120 g/m² Three-Layer 190 N/5cm (±20%) / W1, Sd 0.05 (±)
95 g/m² 170 N/5cm / 100 N/5cm W1, Sd 0.05m +70⁰C
± 10% Diffusion Foil 160 N/5cm (±20%) 0.015m
Modern diffusion foil under the covering, preventing the most frequent Modern diffusion foil under the cover. Thanks to its breathability, it does not
execution errors. Thanks to its breathability, it does not require any require any ventilation duct between the foil and insulation. Thus, no air
ventilation duct between the foil and insulation. Thus, no air currents are currents are generated, increasing the efficiency of the insulation. The
generated, increasing the efficiency of the insulation. The middle middle membrane of the three-layer foil provides breathability and
membrane of the three-layer foil provides breathability and successfully successfully evacuates water from the surface.
evacuates water from the surface.
CHARACTERISTICS
CHARACTERISTICS
TECHNICAL
BILKA Foil 180g is diffuse-open membrane designed as house wrap, which Traditional roof foil, in the economic category, on PE fabric base, with
goes under the external roofing. Membrane is totally waterproof, protects thermo-reflective micro-perforated layer. It's used for double ventilated roof
thermal insulation against rain or snow from the outside and also it is an structures. It doesn't allow steam to penetrate, therefore an aeration surface
excellent wind barrier. between the foil and the thermo-isolation must be provided.
CHARACTERISTICS
CHARACTERISTICS
Tensile Application
Specific Tensile Strenght Vapour Specific Weight Tensile Strenght Waterproofing Degree
Strenght Temperature
TECHNICAL
TECHNICAL
180 g/m² 240 N/5cm 140 N/5cm +80⁰C; W1, Sd 0.02 300 N/5cm (±10%) /
75 g/m² W2, Sd 1m
± 10% (+40; -50) (+35; -35) -30⁰C (0.01; +0.04) 250 N/5cm (±10%)
THERMO-REFLEXIVE FILM
BILKA ALU 90 Foil is a multilayer film consisting of one layer of metallized BILKA ALU 150 Foil is a multilayer film consisting of one layer of metallized
polypropylene film, polypropylene mesh and polyethylene film. The BILKA polypropylene film, polypropylene mesh and polyethylene film. The BILKA
ALU 90 Foil is designed to perform vapor barrier in the construction of roofs. ALU 150 Foil is designed to perform vapor barrier in the construction of roofs.
The metallised layer reflects thermal radiation, preventing heat loss. The metallised layer reflects thermal radiation, preventing heat loss.
Product is insulating barrier to water vapor and the wind. Such membranes Product is insulating barrier to water vapor and the wind. Such membranes
can be used in all ventilated and non-ventilated roofs. can be used in all ventilated and non-ventilated roofs.
CHARACTERISTICS
CHARACTERISTICS
TECHNICAL
90g/m² ± 10% ≥100N -30; 70⁰C Sd 50m ± 30% 150g/m² ± 10% ≥150N -30; 70⁰C
18
Metal Roofing
FASTENING SYSTEMS
Dimension (D×L mm) Drilling Capacity (mm) Hexagon Head (mm) Use
5,5 × 60
5,5 × 80
5 8 Insulating panels fastening on metal support
5,5 × 100
5,5 × 120
5,5 × 140
5,5 × 70
5,5 × 90
5,5 × 110
5,5 × 130 12 8 Insulating panels fastening on metal support
5,5 × 150
5,5 × 190
5,5 × 220
5,5 × 250
www.bilka.com 19
SHIPPING, HANDLING,
TRANSPORT, STORAGESTORAGE
HANDLING,
SHIPPING HANDLING
ź Bilka products are delivered fast, all over Europe, thanks to the high ź BILKA roofs are executed in different sizes depending on the
production capacity, advanced logistics system and good relations with customer's needs so as to minimize material losses and they are
the domestic partners. The focus on transportation and handling, along delivered on wood pallets, which are easily handled using cranes and
with the quality and price of our products is what makes us the number 1 forklifts. During manual handling, there is a risk that the edges of the
choice. A product that is designed, manufactured, packaged and shipped cladding be destroyed and produce deformation which prevents
in an effective manner means a lower cost. products to meet their long-term protective role.
ź Products shall not be moved by dragging.
STORAGE
ź Pallets of metallic and corrugated steel tiles must be stored indoors in ź The corrugated steel sheet that is only zinc-coated, but does not have
dry, well ventilated areas without large variations in temperature. The the paint layer applied, shall be stored ONLY in closed and dry spaces.
products can be stored in open spaces for short periods of time, provided
ź The storage for more than 2 months is regarded as a violation of the
that the pallets are covered with a tarp that maintains its color and allows
conditions set out in the warranty certificate.
for ventilation.
Metal tile pallets must be placed on supports, at a suitable distance from ź Only by complying with the conditions mentioned above, will the roof
the floor to allow draining and venting. fulfill its primary role, namely to protect the house for 60 years.
FAST DELIVERY
20
GENERAL WARRANTY TERMS & CONDITIONS
ź The products have been chemically damaged in a corrosive environment or because of the prolonged contact with other materials:
wet concrete, copper, mortar, soil, paint.
ź The products have been subject to mechanical or other kind of changes due to inadequate transport, handling or storage (unless
BILKA STEEL is liable for such events).
ź The pre-painted BILKA STEEL products have been cut with abrasive blades or other cutting tools that cause excessive local heating of
the processed parts.
ź The BILKA STEEL products have been machined at a working temperature below - 10 degrees C, when machine bending has been
used.
ź The BILKA STEEL products have been tooled at a working temperature below +5 degrees C, when manual bending has been used.
ź During the storage and mounting period, the products have been in direct contact with wet concrete, copper, soil, other corrosive
materials or in permanent or prolonged contact with water.
ź During the use period, direct contact with wet concrete, copper, or other corrosive materials has not been prevented.
ź The BILKA STEEL products have been stored for more than 45 days in open space.
ź The warranty does not cover product damages because of the beneficiary's failure to use the accessories recommended and supplied
by BILKA STEEL, or because of the faulty assembly.
ź The warranty does not cover damages arising from events of force majeure, such as: war, riot, natural disasters, fire, etc.
ź The beneficiary shall lose its rights to warranty if, upon the notification of a defect of the BILKA STEEL products, it fails to provide the
original invoice related to the purchase of the goods.
60
WARRANTY CERTIFICATE
GENERAL WARRANTY
EN-BLK 00001 TERMS AND CONDITIONS
The warranty covers the products delivered by BILKA STEEL in . BILKA STEEL shall not
be held liable for any direct or indirect damages as a result of the facts or omissions below:
The products have been chemically damaged in a corrosive environment or because of the prolonged contact with other
materials: wet concrete, copper, mortar, soil, paint.
The products have been subject to mechanical or other kind of changes due to inadequate transport, handling or storage
(unless BILKA STEEL is liable for such events).
60
The pre-painted BILKA STEEL products have been cut with abrasive blades or other cutting tools that cause excessive
local heating of the processed parts.
The BILKA STEEL products have been machined at a working temperature below - 10 degrees C, when machine bending
has been used.
The BILKA STEEL products have been tooled at a working temperature above +5 degrees C, when manual bending has
been used.
During the storage period, the products have been in direct contact with wet concrete, copper, soil, heat, other corrosive
materials or in permanent or prolonged contact with water.
for the rainwater for steel-sheet products for steel-sheet products During the use period, direct contact with wet concrete, copper, or other corrosive materials has not been prevented.
collection system with GrandeMat finishing with matte finishing
YEARS
The BILKA STEEL products have been stored for more than 45 days in open space.
The BILKA STEEL products have been stored for more than 180 days in closed space.
The guarantee does not cover product damages caused by the failure to use the accessories recommended and supplied
by BILKA STEEL, or because of the faulty assembly.
The guarantee does not cover damages arising from events of force majeure, such as: war, riot, natural disasters, fire, etc.
The beneficiary shall lose its rights to warranty if, upon the notification of a defect of the BILKA STEEL products, it fails
to provide the original product purchase invoice.
for steel-sheet products for products made of
with glossy finishing 0.4 mm thick steel-sheet The rights conferred by this commercial guarantee shall not affect the rights conferred by the Consumer Protection Law.
This period is also guaranteed by the manufacturers of galvanized steel-sheets covered with SELLER:
polyester paint. Name ...............................................................................................................................................
Address ..........................................................................................................................................
The claimed damages must be ascertained by the BILKA STEEL representatives who will Tax Identification Number .............................................................................................................
11
establish the remediation or replacement deadlines, as applicable, in maximum 15 days, Invoice ............................................................................................................................................
in accordance with the provisions laid down in Article 11 of Law No. 449/2003. For this,
the purchaser must allow the BILKA STEEL representatives to have access to the concerned
products, for inspection and possible repair works. BENEFICIARY:
Name ...............................................................................................................................................
The complaint regarding possible defects must be accompanied by: Address ..........................................................................................................................................
- This Warranty Certificate Shipping address ..........................................................................................................................
- The product purchase invoice Tax Identification Number / National Identification Number ......................................................
Invoice ............................................................................................................................................
page 1/2
PP 07/F2 rev.0
page 2/2
PP 07/F2 rev.0 Copyright © 2018 Bilka v.01
EN
follow us on:
BILKA STEEL SRL
Address: Henri Coanda Street No. 17, Brasov, Romania
Telephone: +40 733 30 30 30
Fax: +40 268 548 116
BLOG
E-mail: office@bilka.ro
www.bilka.com