Documente Academic
Documente Profesional
Documente Cultură
PRODUCT DESCRIPTION
LATICRETE® SpectraLOCK® Pro Premium Grout is a patented,
high performance epoxy grout which offers excellent colour Packaging Components:
uniformity, durability, stain protection, and beautiful full grout LATICRETE® SpectraLOCK® Pro Premium Grout is a factory
joints in an easy-to-use, non-sag formula.
proportioned kit with Resin (Part A), Hardener (Part B), and
coloured filler powder (Part C).
Application UNIT NET WEIGHT
INTERNAL AND EXTERNAL FLOOR & WALL** 1/5th Unit 1.0 kg
1 unit 5.0 kg
• Residential & Institutional kitchens
• Cafeterias & Food joints
Shelf Life
• Wash rooms & Clean rooms Factory sealed containers of this product are guaranteed to be
• Swimming pools, Spa & Sauna of first quality for one (1) year if stored at temperatures >59F
(15C) and <95 F (35C).
• Hospitals, Operation theatres, Laboratories
• Schools & Education Institutes
Limitations
• Podium slabs, drive ways & Atriums • Light colours may darken slightly from direct UV exposure.
• Terraces & Balconies* Consult with Technical Services for specific exterior
recommendations.
Advantages
• For industrial applications exposed to high concentrations of
• Stain Proof food and mineral acids and to high heat, use LATAPOXY®2000
• Non-sag formula for floors and walls Industrial Epoxy Grout.
• Maximum stain resistance is achieved 10 days after
• Flush joints possible
installation. Protect from exposure to acids and strong
• Colour - fast cleaners during this period.
• Very Easy to install and clean • Not recommended for soft, polished marble or delicate
glazed tiles.
• Chemical and temperature resistant
• Adhesives/mastics, mortars and grouts for ceramic tile,
• Non-cracking or powdering pavers, brick and stone are not replacements for waterproof
• Suitable for joints of 0.5mm to 15mm width membranes. When a waterproof membrane is required, use
LATICRETE® Waterproof Membrane.
• No – odor during application
• Available in attractive colors
Coverage: Refer to charts and SpectraLOCK® Pro
Premium Grout calculator at www.myklaticrete.com
** Not suitable for External Facades. * There can be color variations on
exposure to UV rays.
Some soft polished marble or delicate glazed or glass Working Time 80 minutes
tile might be scratched by LATICRETE SpectraLOCK
PRO Premium Grout during installation. Apply a Tack Free Time 4 hours
small test area to determine results before grouting Light Foot Traffic 24 hours
entire installation.
Heavy Foot Traffic 36 hours
In steam rooms or submerged applications, allow Stain Resistance 10 Days
LATICRETE® SpectraLOCK® PRO Premium grout to Full Cure 14 Days
cure for 10 days at 70°F (21°C) before use of area and
filing with water. Specifications are subject to change without notification.
Epoxy Resins may affect the color of white or porous Results shown are typical but reflects test procedures used.
stones (such as White Carrara, Thasos White, and Actual field performance will depend on installation
Royal Danby etc.)
methods and site conditions.
5% Citric Acid R R R
(Gatorade Drink) NOTES TO SPECIFIER: Use the constant exposure
10% Potassium R* R* R*
Permanganate recommendations for intermittent exposure to reagents at
1% Potassium R* R* R* temperatures above 90F (32C).
Permanganate
5% Sodium R R NR
Hypochlorite INSTALLATION
(Bleach)
45% KOH R R R Surface Preparation
(Cascade) Before starting to grout, remove debris in grout joints and
Distilled Water R R R
lightly sponge (wet) the tile surface to remove dust and dirt.
* Material will stain due to exposure to these items.
Do not clean tiles with acid cleaners. Substrate temperature
must between 60F (16C) and 90F (32C).
Chemical Resistance* Chart
Cost
Contact a MYK LATICRETE® Distributor in your area.