Documente Academic
Documente Profesional
Documente Cultură
Fnt' = Nominal tensile stress modified to include the effect of shear stress (MPa)
Fnt= Nominal tensile stress as Table J3.2(MPa)
Fv= Nominal shear stress as Table J3.2(MPa)
fv= Required shear stress
Ω = Safety Factor = 2 (ASD)
ANLYSIS RESULTS
1 SHEAR FORCE( DL+SL+L) = 625 KN
2 AXIAL FORCE = 21 KN
BEARING STRENGTH AT BOLT HOLES IS MIN OF Rn2(bolt bearing) and , Rn2(plate shear)
= 397 KN
BEARING STRENGTH AT BOLT HOLES
Fnt' = Nominal tensile stress modified to include the effect of shear stress (MPa)
Fnt= Nominal tensile stress as Table J3.2(MPa)
Fv= Nominal shear stress as Table J3.2(MPa)
fv= Required shear stress
Ω = Safety Factor = 2 (ASD)
ANLYSIS RESULTS
1 SHEAR FORCE( DL+SL+L) = 650
2 AXIAL FORCE = 1
3 Fv = 330
4 fv = Fv/Ω = 330/2 = 165
STRENGTH OF BOLT IN SHEAR
therefore Allowable force is greter than the actual force, hence the design is safe
Rn = min (
Take = 10
12 Check the bolts in tension
MPa
MPa
sq.mm
KN
nos
KN
KN
KN
KN
nos
KN
KN
nos
KN
KN