Documente Academic
Documente Profesional
Documente Cultură
Model
CR200
Compact Disc Recorder
The lightening flash with arrowhead symbol, The exclamation point within an equilateral
within an equilateral triangle, is intended to triangle is intended to alert the user to the
alert the user to the presence of uninsulated presence of important operating and mainte-
“dangerous voltage” within the product's en- nance (servicing) instructions in the literature
closure that may be of sufficient magnitude to accompanying the appliance.
constitute a risk of electric shock to persons.
“WARNING”
“TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS-
TURE.”
SAFETY INSTRUCTIONS
1. Read instructions - All the safety and operating instruc- 9. Heat - The appliance should be situated away from heat
tions should be read before the appliance is operated. sources such as radiators, heat registers, stoves, or other
2. Retain instructions - The safety and operating instructions appliances (including amplifiers) that produce heat.
should be retained for future reference. 10. Power Sources - The appliance should be connected to a
3. Heed warnings - All warnings on the appliance and in the power supply only of the type described in the operating
operating instructions should be adhered to. instructions or as marked on the appliance.
4. Follow instructions - All operating and use instructions 11. Grounding or Polarization - The precautions that should
should be followed. be taken so that the grounding or polarization means of
5. Water and Moisture - The appliance should not be used an appliance is not defeated.
near water - for example, near a bathtub, washbowl, 12. Power Cord Protection - Power supply cords should be
kitchen sink, laundry tub, in a wet basement, or near a routed so that they are not likely to be walked on or
swimming pool, and the like. pinched by items placed upon or against them, paying
6. Carts and Stands - The appliance should be used only particular attention to cords at plugs, convenience recep-
with a cart or stand that is recommended by the manufac- tacles, and the point where they exit from the appliance.
turer. 13. Cleaning - The appliance should be cleaned only as rec-
ommended by the manufacturer.
14. Nonuse Periods - The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
15. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the en-
closure through openings.
16. Damage requiring Service - The appliance should be ser-
An appliance and cart combination should be moved with
viced by qualified service personnel when:
care. Quick stops, excessive force, and uneven surfaces
A. The power supply cord or the plug has been damaged;
may cause the appliance and cart combination to over-
or
turn.
B. Objects have fallen, or liquid has been spilled into the
7. Wall or Ceiling Mounting - The appliance should be
appliance; or
mounted to a wall or ceiling only as recommended by the
C. The appliance has been exposed to rain; or
manufacturer.
D. The appliance does not appear to operate normally or
8. Ventilation - The appliance should be situated so that its
exhibits a marked changed in performance; or
location or position does not interfere with its proper ven-
E. The appliance has been dropped, or the enclosure
tilation. For example, the appliance should not be situ-
damaged.
ated on a bed, sofa, rug, or similar surface that may block
17. Servicing - The user should not attempt to service the ap-
the ventilation openings; or, placed in a built-in installa-
pliance beyond that described in the operating instruc-
tion, such as a bookcase or cabinet that may impede the
tions. All other servicing should be referred to qualified
flow of air through the ventilation openings.
service personnel.
CR200
TABLE OF CONTENTS
1. CD-R THEORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3. CONTROLS, INDICATORS & CONNECTORS . . . . . . . . . . . . . . . . . 10
4. ADJUSTING PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. ADDITIONAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . 39
6. EXPLODED VIEW, PCB ASSEMBLY & PARTS LIST . . . . . . . . 65
7. CIRCUIT & BLOCK DIAGRAMS. . . . . . . . . . . . . . . . . . . . . . . . . 77
8. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
NOTES
* Adjusting procedures are given in this manual which also includes a Parts List and circuit diagrams to
assist the service technician in maintaining the Model CR200.
CAUTION
! Parts marked with this sign are safety critical components. They must always be replaced with identical
components. Refer to the Fostex Parts List and ensure exact replacement.
3
CR200
1. CD-R THEORY
Φ120
max Φ118
Φ44.7
1-1. Physical layout compared to CD min Φ33
min Φ26
The conventional CD and CD-R discs basically have the same
Φ15
physical layout. However, as you can see from the Fig. 1,
comparing to the conventional CD, the CD-R disc also has so-
called “minus” areas such as PCA (Power Calibration Area) and Information area
Center Clamping
area Pregroove area with address (ATIP)
PMA (Program Memory Area) where the temporary information hole
Layout of unrecorded CD-R disc
is recorded.
max Φ118
• Unrecorded, blank disc max Φ116
Φ50
The information area is located next to the clamping area and the recorded
Φ46 part
center hole. This area contains a pregroove with CLV (Constant Φ44.7
Linear Velocity) clocking information and a time code.
MUSIC
5: Lead-out Area
Lead-in Area Program Area Lead-out
final Table of Contents (TOC) Area
Layout of recorded CD-R disc
• Finalized disc
After finalizing the disc, the CD-R disc will become compatible max Φ118
with the RED Book (for regular CD) definitions and specifications. max Φ116
Φ50
Therefore, it can be played back on conventional CD players. The recorded part
Φ46
Information Area of a finalized disc consists of three parts:
1: Lead-In Area MUSIC
2: Program Area
TOC Lead-out
3: Lead-Out Area Layout of conventional CD disc Area
0.6µm
(track width)
1.6µm
(track distance)
PCA
Lead In
Test Area Count Area PMA Area
Partition 100 98 4 3 2 1 98 5 3 1
CAUTION :
Every time the CD-R disc is inserted, one test is performed. Also if you leave the disc in the recorder at power off, a test will
be performed when powering on. This might lead to the situation that the PCA might be fully used up even if there is a
remaining space to record audio signal. The recordings made after the PCA is fully used up will not be optimal in performance.
5
CR200
Transparent Land
substrate Groove
Laser beam
A low power laser beam is shot A low power laser beam is shot
and high reflectance is obtained. and only low reflectance is obtained.
1-5. Finalize
In order to be playable on an ordinal CD-player, the CD-R disc must have a corresponding data for TOC (Table Of Contents).
This area is not used until all the recording is completed. Instead, a special area called PMA (Program Memory Area) is used.
When the disk is full or all the recording is completed, the disk can be finalized. This means that the temporary information
in the PMA is checked and transferred to TOC. Now the disk is playable on an ordinal CD player but it will not be recordable
any more.
6
CR200
2. SPECIFICATIONS
FUNCTIONS
Sampling rate converter Fs : 48 kHz / 32 kHz → 44.1 kHz
Automatic disk distinction
Time display switching
Synchronous to one song / All songs / DAT ID
REC mute
Automatic power calibration
Automatic track increment
Manual track increment
Automatic REC PAUSE
Previous End section of previous track can be reproduced during REC
PAUSE mode.
Fader in / fader out Can be controlled only by infra-red remote controller
Disk remaining time display
Sampling monitor
Skip play
Track skip on / off Can be controlled only by main unit key
One song / all songs program repeat Can be controlled only by infra-red remote controller
Program play
Manual search
Track search
Direct search Can be controlled only by infra-red remote controller
Program setting / clear Can be controlled only by infra-red remote controller
Input sensitivity switch SW 1 (+4 dBu / -8 dBu, rear panel)
Infra-red remote controller on / off switch SW 2 (rear panel)
Digital out on / off switch SW 2 (rear panel)
Copy bit setting switch SW 2 (No restriction / One time only / Prohibited, rear panel)
FL DISPLAY CONTENTS
PLAY
REC
PAUSE
REPEAT
1-REPEAT
AUTO TRACK No.
PROGRAM
TOC
Level meter
Track number
Input sampling frequency
Elapsed time
Remaining time
Total time
Remaining record time
7
CR200
GENERAL
Model Compact disc recorder
Applicable discs CDs and CD-Rs
Number of channels 2 channels (stereo)
Power supply AC 120 V, 60 Hz
AC 220 ~ 230 V, 50 / 60 Hz
Power consumption 21 W
Weight (without package) 6.2 kg / 13.7 lbs
Maximum dimensions 482 (W) x 134 (H) x 294 (D) mm
18-31/32 (W) x 5-9/32 (H) x 11-9/16 (D) inch
AUDIO UNIT
Playback (CD)
Frequency characteristics 4 Hz ~ 20 kHz ± 1.0 dB
S/N 83 dB or more (EIAJ)
Dynamic range 83 dB or more (EIAJ)
Total harmonic distortion 0.01 % or less (EIAJ)
Channel separation 90 dB or more (EIAJ)
De-emphasis deviation 0 ± 1.5 dB or less (EIAJ)
Level difference between channels 1.0 dB or less (EIAJ)
Output voltage 2.4 V ± 0.3 V rms
Monitoring (analog RCA pin input)
Frequency characteristics 4 Hz ~ 20 kHz ± 1.0 dB
S/N 83 dB or more (EIAJ)
Dynamic range 83 dB or more (EIAJ)
Total harmonic distortion 0.01 % or less (EIAJ)
Maximum input level 3.2 V rms or more
Minimum input level 0.4 V rms or less
Record & Playback (analog RCA pin input)
Frequency characteristics 4 Hz ~ 20 kHz ± 1.0 dB
S/N 83 dB or more (EIAJ)
Dynamic range 83 dB or more (EIAJ)
Total harmonic distortion 0.01 % or less (EIAJ)
Monitoring (Digital coaxial input)
Frequency characteristics 4 Hz ~ 20 kHz ± 1.0 dB
S/N 95 dB or more (EIAJ)
Dynamic range 90 dB or more (EIAJ)
Total harmonic distortion 0.01 % or less (EIAJ)
Maximum input level 0.6 V rms or more
Minimum input level 0.2 V rms or less
Record & Playback (Digital coaxial input)
Frequency characteristics 4 Hz ~ 20 kHz ± 1.0 dB
S/N 90 dB (analog) / 105 dB (digital)
Dynamic range 90 dB (analog) / 95 dB (digital)
Total harmonic distortion 0.01 % (analog) / 0.003 % (digital)
8
CR200
9
CR200
25 24 23 22 21 20 19 18 17 16
15
SKIP SKIP PLAY
SET CLEAR ON/OFF
L R MIN MAX
14
TRACK NO. COPY BIT
PHONES LEVEL
(MANUAL)
1 AUTO/MANUAL WRITE TIME
13
POWER
MIN MAX
PHONES
INPUT DIGITAL
SELECTOR SYNCHRO FINALIZE
2 3 4 5 6 7 8 9 10 11 12
10
CR200
26 27 28 29 30 31
IN OUT IN OUT
R L R L
AC IN
OPTICAL COAXIAL IEC 958
LINE IN DIGITAL IN/OUT LINE OUT
SW 1
R L
PUSH HEAR
PUSH HEAR
PUSH HEAR
1 2 3
AES/EBU
BALANCE IN DIGITAL IN SIGNAL GND
ON
1 2 3 4
OFF ON SW 2 PARALLEL
DIGITAL OUT REMOTE
36 37 35 34 33 32
38 46 Stop button [ ]
Pause button [ ]
REPEAT Play button [ ]
39
41. Numeric buttons [1 to 10, >10]
40
1 2 3
42. Program button [PGM]
43. Program check button [CHECK]
4 5 6
44. Program clear button [CLEAR]
41 7 8 9
45. Time button [TIME]
10 10 TIME 46. Record muting button [ ]
45
PGM CHECK CLEAR 47. Manual track no. write button [TRACK NO. WRITE]
42 44
48. Record button [ REC]
43
11
CR200
4. ADJUSTING PROCEDURES
4-1. ADJUSTING PROCEDURES
Even if nothing is wrong with the pickup section and hardware components in the circuits, due to the misalignment of
various adjustments, there is a possibility that the CR200 does not work properly or at all. According to the following
procedures, make adjustments correctly.
12
CR200
Adjustment 2
No. Item Test Point Pot
1 CD-R VCO control voltage adjustment CN331 Pin-1 (VCOIN) VR301 (VCO CON)
2 Multi pulse time adjustment CN3506 Pin-6 (MPLS) VR3501 (MPLS DLY)
3 EFM rising edge time adjustment CN3506 Pin-5 (EFMIN) VR3502 (EFM DLY)
CN3506 Pin-4 (SEFM)
4 3T rising edge time adjustment CN3506 Pin-3 (3TIN) VR3503 (3T DLY)
CN3506 Pin-2 (3TOUT)
5 WBL + offset adjustment CN104 Pin-6 (RWBL) VR107 (WBL+. OFS)
6 Coarse WBL offset adjustment CN104 Pin-5 (WBL) VR108 (WBL. OFS)
7 RF offset adjustment CN204 Pin-1 (RF) VR121 (RF. OFS)
8 Playback power readjustment CN104 Pin-7 (PWAJT) VR103 (PB. PW)
9 Coarse focus offset adjustment CN204 Pin-1 (RF) VR105 (FE. OFS)
10 Main and sub mix ratio adjustment CN104 Pin-1 (STE) VR110 (MS. MIX)
CN104 Pin-2 (MSTE)
11 Tracking amp. gain adjustment CN104 Pin-3 (TE) VR111 (TE. GAIN)
MPLS DLY
123 123
123 123
TEST
123 123
123 123
123 123 CN204
1. RF
6 1 2. TRKER Fig. 7
3. TRKIN
CN204 4. A GND
ADJUST TP 5. FCSIN
6. FCSER
Fig. 6
13
CR200
Adjustment 2 (continued)
No. Item Test Point Pot
12 Tracking offset adjustment CN104 Pin-3 (TE) VR112 (TE. OFS)
13 ACT offset adfjustment CN5021 Pin-1 (ACT ERR) VR1 (ACT. OFS)
14 ACT gain adjustment CN5021 Pin-1 (ACT ERR) VR10 (ACT. GAIN)
15 Fine focus offset adjustment CN204 Pin-1 (RF) VR105 (FE. OFS)
16 WBL balance adjustment CN104 Pin-5 (WBL) VR106 (WBL. BALANCE)
17 Fine WBL offset adjustment CN104 Pin-5 (WBL) VR108 (WBL. OFS)
18 WBL focus offset adjustment CN104 Pin-5 (WBL) VR115 (WFE. OFS)
19 Recording power adjustment CN104 Pin-7 (PWAJT) VR104 (REC. PW)
20 HF amp. gain adjustmnet CN104 Pin-8 (HF) VR119 (HF. GAIN)
21 Focus servo loop gain adjustment CN204 Pin-5 (FCSIN) VR201 (FCS. GAIN)
CN204 Pin-6 (FCSER)
22 Tracking servo loop gain adjustment CN204 Pin-2 (TRKER) VR202 (TE. GAIN)
CN204 Pin-3 (TRKIN)
VR103
VR10 PB. PW
ACT. GAIN
VR1
ACT. OFS 1. STE
VR110 2. MSTE
MS. MIX 3. TE
CN104
HEAD BOARD ASSY 4. A GND
VR112
TE. OFS 5. WBL
6. RWBL
7. PWAJT
VR111
TE. GAIN
8. HF
VR119
HF GAIN
VR121
RF. OFS
VR105 VR106
FE. OFS WBL BALANCE
VR115
WFE. OFS
Fig. 8
14
CR200
Notes
(1) Use a 10 : 1 probe for the oscilloscope.
(2) All the knob positions (settings) for the oscilloscope in the adjustment procedures are for when a 10 : 1 probe is used.
Test Mode
This model has a test mode so that the adjustments and checking required for servicing can be carried out easily.
When this model is put into test mode, the keys on the front panel would work differently from normal condition.
Adjustments and checks can be carried out by operating these keys with the correct procedures. On this model, all
adjustments are carried out in test mode.
When the test mode is set correctly, the display is different from what it usually is when the power is turned on. (lights up
all FL display) If the display is still the same as usual, test mode has not been set correctly, so repeat Steps 1 Ð 3.
15
CR200
FINALIZE Lights up the laser diode and closes the focus servo.
PLAY Starts the spindle motor and closes the spindle servo.
16
CR200
4.2 Adjustment 1
4.2.1 Playback Power Adjustment
DANGER - LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
CAUTION:
(a) Perform this adjustment more than 5 minutes after starting up the test mode.
(b) This adjustment cannot be performed accurately if disc is inserted. Be sure to remove disc first before adjustments.
(c) If the specified voltage is not obtained by turning VR103, the pickup assy might be defective. Also be careful not to get
the pickup lens dirty.
[ Procedures ]
• When adjusting with the multimeter.
(1) Lights up the playback laser diode using the DIGITAL SYNCHRO key.
(2) Adjust the voltage value of Pin-7 (PWAJT) of CN104 (TP1) to the voltage value (PB PW voltage ± 5mV) displayed on
the pickup flexible cable using VR103 (PB PW).
P : Playback power
R : Recording power
Fig. 9
17
CR200
[ Procedures ]
(1) Press the FINALIZE key and the PLAY key in the order to close the focus servo and then the spindle servo.
(2) Adjust VR105 (FE. OFS) so that the amplitude of waveform at CN204 (TP201), Pin-1 (RF) is maximum.
NOTE: The oscilloscope displays a moving image, not a ÒSTILLÓ image as shown below. In order to verify that the focus
servo is on, tap on the machine gently and listen to the sound indicating the servo operation.
Fig. 10
18
CR200
CAUTION:
Before executing this adjustment, you must cut a few wire binders, disconnect cable and loosen 4 screws so that the
HEAD BOARD assy can be tilted up and fixed into the slits.
[ Procedures ]
(1) Move the pickup to the position where the radial/tangential adjustment screws will be seen with the MANUAL / TRACK
SEARCH FWD or REV keys so that the radial/tangential adjustment screws can be adjusted.
(2) Press the FINALIZE key and the PLAY key in the order to close the focus servo and then the spindle servo.
(3) Adjust the RAD (radial direction) and TAN (tangential
direction) adjustment screws alternately with hexagonal
Hexagonal
screwdriver (1.27 mm diagonal) to maximize the RF output at screwdriver
CN204 (TP201), Pin-1.
NOTE:
Radial direction and tangential direction
mean the direction relative to the disc
shown in Fig. 11.
Radial
adjustment
Radial direction screw
Tangential direction
Tangential
adjustment
screw
Disc FR
O
Fig. 2
NT
PA
NE
L
Fig. 11
19
CR200
[ Procedures ]
(1) Move the pickup to the position where the grating adjustment slit will be seen with the MANUAL / TRACK SEARCH
FWD or REV keys so that the grating adjustment can be adjusted.
(2) Press the FINALIZE key and the PLAY key in the order to close the focus servo and then spindle servo.
(3) Insert a screwdriver into the grating adjustment slit and adjust the grating to find the null point.
For more details, see next page.
(4) If you slowly turn the screwdriver clockwise from the null point, the amplitude of the wave gradually increases. Then, if
you continue turning the screwdriver, the amplitude of the wave becomes smaller again. Turn the screwdriver
counterclockwise from the null point and set the grating to the first point where the wave amplitude reaches its maximum.
Reference : Fig. 13 shows the relation between the angle of the tracking beam with the track and the waveform.
(5) Return the pickup to more or less midway across disc with the MANUAL / TRACK SEARCH key. Then, press the
PAUSE key and check that the track number and elapsed time are displayed on the front panel. If they are not displayed
at this time or the elapsed time changes irregularly, check the null point and adjust the grating again.
Small
screwdriver
Grating
adjustment
CN104 LPF screw
(10 : 1)
(TP1)
15kΩ
Pin 3
(TE)
0.001
µF
Pin 4
(AGND)
HEAD BOARD
ASSY
Fig. 3
Fig. 12
20
CR200
Note : If the difference between the amplitude of the error signal at the
innermost edge and outermost edge of the disc is more than 10%,
adjust the grating again.
Null point
Grating adjustment position
Waveform of
CN104 (TP1), Pin 3 (TE)
Fig. 13
Fig. 4
[ Procedures ]
(1) Move the pickup to the midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key and the PLAY key in the order to close the focus servo and then spindle servo.
(3) Line up the bright line (ground) at the center of the oscilloscope screen and put the oscilloscope into DC mode.
(4) Adjust VR112 (TE. OFS) so that the positive amplitude and negative amplitude of the tracking error signal at CN104,
Pin-3 (TE) are the same (in other words, so that there is no DC component).
A=B A=B
A A
GND
GND
B B
21
CR200
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key, the PLAY key and the PAUSE key in the order to close the respective servos and put the player
into play mode.
(3) Adjust VR105 (FE. OFS) so that the 3T waveform at CN204, Pin-1 (RF) is maximum.
Fig. 15
22
CR200
[ Procedures ]
(1) Move the pickup to the position where the radial/tangential adjustment screws will be seen with the MANUAL / TRACK
SEARCH FWD or REV keys so that the radial/tangential adjustment screws can be adjusted.
(2) Press the FINALIZE key, the PLAY key and the PAUSE key in the order to close the respective servos and put the player
into play mode.
(3) First, adjust the radial adjustment screw with the hexagonal screwdriver (1.27 mm) so that the eye pattern (the diamond
shape at the center of the RF signal) can be seen the most clearly and the amplitude is at maximum..
(4) Next, adjust the tangential adjustment screw with the hexagonal screwdriver so that the eye pattern can be seen the most
clearly. (Fig. 17).
(5) Adjust in the order of the radial adjustment screw and the tangential screw again, so that the eye pattern can be seen the
most clearly. As necessary, adjust the two screws alternately so that the eye pattern can be seen the most clearly.
After the adjustment, remove the float screw, turn over the servo mechanism assembly, then secure the radial adjustment
(6) screw and the tangential adjustment screw with loc-tite.
Radial
adjustment
screw
Tangential
adjustment
screw
Fig. 16
23
CR200
Fig. 17
4.3 Adjustment 2
4.3.1 CD-R VCO Control Voltage Adjustment
• Objective To optimize the CD-R VCO control voltage adjustment of VCO IC.
• Symptom when out of adjustment The unit does not record or playback CD-R discs.
• Measurement instrument connections Multimeter to CN331, Pin-1 (VCOIN) (STRATEGY BOARD assy)
GND probe can be connected to CN331, Pin-2 (GND).
• Disc None needed
• Player state Test mode, stop
• Adjustment location VR301 (VCOIN) (STRATEGY BOARD assy)
[ Procedures ]
(1) Adjust VR301 (VCO CON) so that the voltage at Pin 1 (VCOIN) of CN331 (TP30) becomes 2.5 ± 0.1V.
24
CR200
[ Procedures ]
(1) Disconnect a connector CN3502 (white wires with green connector).
(2) Adjust the time from rising edge to falling edge of Waveform with 2V level.
(3) Adjust VR3501 (MPLS DLY) so that the DC voltage at CN3506 pin-6 (MPLS) becomes 70nS ± 3nS.
(4) Press the STOP key.
(5) Connect a connector CN3502.
2V
GND
70nS
±3nS
[ Procedures ]
CH1
(1) Disconnect a connector CN3502. CH2
(2) Turn VR104 (REC. PW) fully counterclockwise to reduce the power to minimum.
2V
(3) Press RECORD and REC MUTE keys in the order to lights up the laser diode.
(4) Adjust the time from rising edge of CN3506 pin 5 to rising edge of pin 4 of waveform
GND
at the 2V level.
(5) Adjust VR3502 (EFM DLY) so that the delay becomes 80nS ± 3nS. 80nS
±3nS
25
CR200
[ Procedures ]
(1) Disconnect a connector CN3502.
(2) Turn VR104 (REC. PW) fully counterclockwise to reduce the power at minimum. CH1
CH2
(3) Press the RECORD and the REC MUTE keys in the order to lights up the laser
diode.
2V
(4) Adjust the time from rising edge of CN3506 pin-3 to rising edge of pin 2 of waveform
with 2V level.
GND
(5) Adjust VR3503 (3T DLY) so that the delay becomes 42nS ± 3nS.
42nS
(6) Connect a connector CN3502. ±3nS
[ Procedures ]
(1) Turn VR108 (WBL. OFS) to fully counterclockwise.
(2) Adjust VR107 (WBL+. OFS) so that the DC voltage at CN104 (TP1), Pin-6 (RWBL) is Ð20mV ± 10mV.
26
CR200
[ Procedures ]
(1) Adjust VR108 (WBL. OFS) so that the DC voltage at Pin 5 (WBL) of CN104 (TP1) becomes 0 ± 10mV.
[ Procedures ]
(1) Adjust VR121 (RF. OFS) so that the DC voltage at Pin 1 (RF) of CN204 (TP201) becomes 0 ± 10mV.
27
CR200
[ Procedures ]
(1) Press the FINALIZE key and the PLAY key in the order to close the focus servo and then the spindle servo.
(2) Adjust VR105 (FE. OFS) so that the amplitude of RF signal at CN204, Pin-1 (RF) is maximum.
[ Procedures ]
(1) Press the FINALIZE key and the PLAY key in the order to close the focus servo and then the spindle servo.
(2) Set the oscilloscope to ADD mode (waveform adding mode of CH1 and CH2) and observe the adding waveform of CH1
and CH2.
(3) Adjust VR110 (MS. MIX) so that the amplitude of waveform becomes minimum.
28
CR200
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL /
TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key and the PLAY key in the order to close the focus servo
and then the spindle servo.
(3) Line up the bright line (ground) at the center of the oscilloscope screen and put
the oscilloscope into DC mode. GND 1.0V ± 0.05V
(4) Adjust VR111 (TE. GAIN) so that the positive amplitude and negative amplitude
of the tracking error signal at CN104 (TP1), Pin 3 (TE) is 1.0V ± 0.05V.
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key and the PLAY key in the order to close the focus servo and then the spindle servo.
(3) Line up the bright line (ground) at the center of the oscilloscope screen and put the oscilloscope into DC mode.
(4) Adjust VR112 (TE. OFS) so that the positive amplitude and negative amplitude of the tracking error signal at CN104,
Pin-3 (TE) are the same (in other words, so that there is no DC component).
Note : If the great offset is observed, perform the adjustments in the section 4.3.11 and 4.3.12.
A=B A=B
A A
GND
GND
B B
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key and the PLAY key in the order to close the focus servo and then the spindle servo.
(3) Adjust VR1 (ACT. OFS) so that the DC voltage at CN5021 (TP00), Pin 1 (ACT ERR) is 0 ± 20mV.
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key and the PLAY key in the order to close the focus servo and then the spindle servo.
(3) Press the WRITE key to light up the WRITE KEY LED, and short-circuit the Pin-2 and Pin-3 of CN5021.
Adjust VR10 (ACT. GAIN) so that the DC voltage at CN5021 (TP00), Pin 1 (ACT ERR) is Ð380 ± 20mV.
Note : If the great offset is observed, perform the adjustments in the section 4.3.13 and 4.3.142.
30
CR200
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key, the PLAY key and the PAUSE key in the order to close the respective servos and put the player
into play mode.
(3) Adjust VR105 (FE. OFS) so that the 3T waveform at CN204, Pin-1 (RF) is maximum.
Note : Adjust after confirming that the WRITE KEY LED is OFF.
Fig. 19
31
CR200
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key, the PLAY key and the PAUSE key in the order to close the respective servos and put the player
into play mode.
(3) Adjust VR106 (WBL. BALANCE) so that the amplitude of waveform at CN104 (TP1), Pin 5 (WBL) is minimum.
Fig. 20
32
CR200
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key, the PLAY key and the PAUSE key in the order to close the respective servos and put the player
into play mode.
(3) Adjust VR108 (WBL. OFS) so that the amplitude of waveform at CN104, Pin-5 (WBL) is minimum.
Fig. 21
33
CR200
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key, the PLAY key and the PAUSE key in the order to close the respective servos and put the
CR200 into play mode.
(3) Press the AUTO/MANUAL key to light up the COPY BIT LED.
(4) Adjust VR115 (WFE. OFS) so that the amplitude of waveform at CN104, Pin-5 (WBL) is minimum.
Fig. 22
34
CR200
CAUTION:
(a) Perform this adjustment more than 5 minutes after starting up the test mode.
(b) Power more than ten times greater than playback power is released during these adjustment. Never look directly at the
objective lens.
(c) This adjustment cannot be performed accurately if disc is inserted. Be sure to remove disc first before adjustments.
(d) The laser diode may be damaged if the recording power is greater than the specified value. Always perform the step 1
below before making adjustments and be careful not to exceed the adjustment value by more than 50mV from the
specified value in the step 3 below).
[ Procedures ]
• When Adjusting with the multimeter
(1) Fully turn VR104 (REC. PW) counterclockwise to reduce the power to the minimum.
(2) Press RECORD and REC MUTE keys in this order to lights up the laser diode.
(3) Adjust the voltage value of Pin 7 (PWAJT) of CN104 to the voltage value (REC. PW voltage ± 10mV) displayed on the
pickup flexible cable using VR104 (REC. PW).
CAUTION:
(a) Perform this adjustment more than two minutes after starting up the test mode (after inserting the AC plug).
(b) The laser diode may be damaged if the recording power is greater than the specified value. Always perform step 1 before
making adjustments and be careful not to exceed the adjustment value by more than 0.3mW (specified value in step 3).
(c) Power more than ten times greater than playback power is released during this adjustment. Never look directly at the
objective lens.
35
CR200
[ Procedures ]
(1) Fully turn VR104 (REC. PW) counterclockwise to reduce the power to the minimum.
(2) Move the pickup to the outer edge of the disc with the MANUAL / TRACK SEARCH FWD key.
(3) Press RECORD and REC MUTE keys in that order to lights up the laser diode.
(4) Shine the light discharged from the objective lens in the pickup on the light power meter sensor and adjust VR104 (REC.
PW) so that the recording laser diode output is an average of 4.7mW ± 0.1mW (Wavelength 790nm, Average mode).
P : Playback Power
R : Recording Power
[ Procedures ]
(1) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(2) Press the FINALIZE key, the PLAY key and the PAUSE key in the order to close the respective servos and put the player
into play mode.
(3) Line up bright line (ground) at the center of the oscilloscope screen and put the oscilloscope into DC mode.
(4) Adjust VR119 (HF. GAIN) so that the amplitude of waveform at CN104 , Pin-8 (HF) is 2.0V ± 0.1V.
NOTE :
Adjust after checking that the COPY BIT LED is OFF.
2.0V ± 0.1V
Fig. 23
36
CR200
[ Procedures ]
(1) Set the AF generator output to 1.4kHz and 1Vp-p.
(2) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(3) Press the FINALIZE key, the PLAY key and the PAUSE key in the order to close the respective servos and put the player
into play mode.
(4) Adjust VR201 (FCS. GAIN) so that the lissajous waveform is symmetrical about X axis and the Y axis.
CN204
(TP201) (10 : 1)
100kΩ
Pin 5 (FCSIN)
Pin 4 (AGND) X Y
1.4kHz
1Vp-p ∼
Pin 6 (FCSER)
(10 : 1)
Fig.
Fig. 24
6
37
CR200
[ Procedures ]
(1) Set the AF generator output to 1.2kHz and 2Vp-p.
(2) Move the pickup to midway across the disc (R = 35mm) with the MANUAL / TRACK SEARCH FWD or REV keys.
(3) Press the FINALIZE key, the PLAY key and the PAUSE key in the order to close the respective servos and put the player
into play mode.
(4) Adjust VR202 (TE. GAIN) so that the lissajous waveform is symmetrical about X axis and the Y axis.
CN204
(TP201) (10:1)
100kΩ
Pin 3 (TRKIN)
Pin 4 (AGND) X Y
1.2kHz
(10:1) 2Vp-p
∼
Pin 2 (TRKER)
39kΩ
0.001µF
Fig. 7
Fig. 25
38
CR200
5. ADDITIONAL INFORMATION
5-1. WAVEFORM AND VOLTAGES
HEAD BOARD ASSY
• Measuring condition: DC input unless otherwise noted.
2 CN111 pin 1 (EFM) 7 IC202 pin 7 (TRKCON) 11 CN106 pin 5 (SPDL) 14 TP1 pin 5 (WBL)
2V/div 0.5mS/div 1V/div 2mS/div
3 CN105 pin 4 (XSAMP) 6 IC202 pin 1 (TD) 10 IC203 pin 4 (SPD MT) 15 CN105 pin 11 (WBL)
0.2V/div 0.5mS/div 2V/div 2mS/div
Test mode During CD-R PLAY
During maximum recording During PLAY 100mV/div 20µS/div
power laser diode ON During PLAY
2V/div 0.2µS/div
11 GND
7 GND 14
2
GND
GND
10 GND 15 GND
3 6 GND
GND
5 IC202 pin 6 (FCS ON) 9 IC203 pin 1 (SLDCON) 12 IC101 pin 47 (MTE) Q101 (2SC2412K) [V]
200mV/div
4 IC202 pin 3 (FD) 8 IC203 pin 3 (SLD MT) 13 CN105 pin 3 (M+STE) Pin MODE
500mV/div No. STOP PLAY REC
During PLAY
During PLAY 0.5V/div 0.2mS/div E 0.6 0.6 0.8
5V/div 1mS/div Test mode
CD FCS C - - -
CLOSE B 1.2 1.2 1.4
SPDL
9 TRK OPEN
GND
5 GND
8 GND 12 GND Q102 (2SB1189) [V]
4 GND
Pin MODE
13
No. STOP PLAY REC
GND
E 5.0 5.0 4.5
C 1. 5 1.5 1.8
B 4.3 3. 8 3.8
IC101 (PA4022A) [V] IC102 (BA4560F) [V] IC202 (LA6517) [V] Q103~5 (2SA1037K) [V]
Pin MODE Pin MODE Pin MODE Pin MODE
No. STOP PLAY REC 1Pin MODE
No. STOP PLAY RE C No. STOP PLAY REC No. STOP PLAY REC
No. STOP PLAY REC
1 0.01 - -0.1 35 0.6 0.6 0.8 1 0 0. 2 1.5 1 0 0 0
E 5.0 5.0 4. 8
2 0.02 -0.12 -0.4 36 0.6 0.6 0.8 2 1.4 1. 4 1.5 2 9.4 - -
C 1.0 1.0 2. 2
3 0 -0.16 0 37 1.2 1.2 1.5 3 4.4 1.4 1.4 3 -0.4 -0.4 -0.4 B - - -
4 -4.9 -4.9 -4.9 38 0.1 0.1 3.1 4 -5.0 -5.0 -5.0 4 -10.0 - -
5 0 0 0 39 5.0 0 0 5 0 0 0 5 -0.4 -0.4 -0.4
6 0 0 0 40 0 0 -0.1 6 0 0 0 6 -0.4 -0.4 -0.4 Q106 (2SA1037K) [V]
7 0 0 0 41 0 0 0 0.1 to 7 0 0 0
7 0 0 Pin MODE
8 0 0 0 42 0 0 0 0.6 8 0 0 0
8 5 5 5 No. STOP PLAY REC
9 0 0 0 43 0 0 0.1
E 5.0 5.0 4.8
10 0 0 0 44 0 -0.1 -0.1
11 0 0 0 45 -4.9 -4.9 -4.9
C - - -
12 0 0 0 46 0 -0.1 -0.1
IC103 (TC7S08F) [V] IC203 (LA6520) [V] B - - -
13 0 0 0 47 0 0 0 Pin MODE
Pin MODE
14 0 0 0 48 0 0 0 No. STOP PLAY REC
No. STOP PLAY REC
15 0 0 0 49 0 0 0 1 0 0 0 Q107 (2SA1461) [V]
1 0.01 0.01 0 to 0.2
16 0 0 - 50 0 0 0 2 0 0 2.0 Pin MODE
0.1 to
17 0 0 0 51 0 0 0 3 0 - - 2 0.01 0.3 No. STOP PLAY REC
0.4
18 0 0 0 52 0 -0.1 0 4 0 0 2.0 0.2 to E - - -
5 5 - - 3 0 0.3
19 0 0 0 53 0 -0.1 -0.1 0.3 C 1. 5 1.5 1.8
20 0 0 0 54 0 0.2 0.2 -0.5 to B 3.0 3.0 3.0
4 0.04 -0.1
21 0 0 0 55 0 0 0 -0.7
IC104 (BA4560F) [V] 5 2.2 2.2 2.2
22 0 0 0 56 0 0 0
23 1.4 1.4 1. 4 57 0.1 0.1 0.1 Pin MODE 6 2.2 2.2 2.2
No. STOP PLAY REC Q109 (DTC114TS) [V]
24 1.4 1.4 1.4 58 -4.0 -4.0 -4.0 7 0 0 0
25 0 0 0. 9 59 -2.9 -2.7 -2.7 1 0 -0.1 -0.2 8 0 0 0 Pin MODE
26 0 0.2 0.2 60 0 0 0 2 0 -0.1 -0.1 9 0 0 0 No. STOP PLAY REC
27 0 0 1.2 61 0 0 0 3 0 -0.1 -0.1 10 - - - E 0 - -
28 0 0 0 62 0 0 0 4 -5.0 - - 11 - - - C 0 1. 1 1. 2
29 5.0 5.0 5.0 63 5.0 5.0 5.0 5 0 0 0 12 9.4 - - B 5.0 0 0
30 4.2 1.2 1.2 64 -0.1 0.3 0.3 6 0 0 0 -10.0 - -
31 -3.4 -1.7 -1.7 65 0 -0.1 0 7 0 0 0
32 0 0 0 66 -0.3 1.4 1.2 8 5. 0 - - Q111 (DTA114TK) [V]
33 -1.0 0 0 67 0 0 0 Pin MODE
34 4. 3 3.6 3.6 68 -0.1 0 0 No. STOP PLAY REC
E 5.0 - -
C 0 0 4.4
B 5.0 0 0
39
CR200
1 J201 pin 10 (HF) 5 IC205 pin 63 (MIRR) 2V/div 9 IC356 pin 48 (SPSP) 2V/div 1 J201 pin 10 (HF)
2 CN204 pin 1 (RF) 2 CN204 pin 1 (RF) 0.5V/div 10 IC205 pin 13 (CLV) 10V/div 19 IC356 pin 23 (RFT)
During CD PLAY
500mV/div 0.5µS/div During manual search 11 IC205 pin 14 (ECLV) 10V/div 20 IC356 pin 24 (RFB)
0.5mS/div
In the FCS ON During CD-R PLAY
test mode SPDL ON (CD) (in common with GND of 1 and 19)
20µS/div TRK OPEN 1V/div 1mS/div
5
1
GND 9 1
2 GND GND
GND GND 10 19
2 GND
GND 11 20
GND GND
3 CN204 pin 2 (TE) 6 IC206 pin 4 (MDP) 2V/div 12 IC205 pin 19 (FGIN) 21 J209 pin 5 (DOUT) 5V/div
Test mode 10 IC205 pin 13 (CLV) 10V/div 13 IC205 pin 17 (FGOUT) 22 J208 pin 13 (MCK) 2V/div
TRK, CLOSE state In the test mode
Top : FILTER exist 11 IC205 pin 14 (ECLV) 10V/div FCS ON During CD PLAY
Bottom : FILTER none SPDL ON (CD) 0.1µS/div
500mV/div 0.5mS/div During CD PLAY
20µS/div TRK OPEN
2V/div 2mS/div
6 21
GND 12 GND
GND GND
10 GND 22
GND 13 GND
11 GND GND
3 CN204 pin 2 (TE) 7 IC207 pin 4 (MDP) 2V/div 14 IC206 pin 34 (DATA)
40
CR200
41
CR200
42
CR200
1 IC801 pin 2 6 IC401 pin 28(LRCKI) 11 IC302 pin 9 (VCO IN) 16 IC404 pin 7
(ADC LDATA) 1V/div (LIN OUT Lch) 5V/div
2 IC801 pin 27 7 IC401 pin 1 (DIN) 12 IC302 pin 4 (VCO OUT) 17 Q409 (Emitter) 5V/div
(ADC RDATA) 10V/div
During REC
8 IC401 pin 2 (BCKI) 13 IC301 pin 80 (EC ERR) 18 IC406 pin 7
10V/div (HP OUT Lch) 10V/div
(Analog 1kHz 0dB) During REC
1V/div 1mS/div 10V/div 2µS/div During REC 50nS/div During PLAYBACK
11
(CD 1kHz)
1
0.5mS/div
6
GND 16 GND
GND 7 GND
2 GND 12 GND
17 GND
8 GND
GND 13 GND 18 GND
43
CR200
IC801 (AK5340-VS) [V] IC803, 804 (NJM5532DD) [V] Q301 (DTA114TS) [V] Q403, 405 (DTA124ES) [V]
Pin MODE Pin MODE Pin MODE Pin MODE
No. STOP PLAY REC No. STOP PLAY REC No. STOP PLAY REC No. STOP PLAY REC
1 2.5 2. 5 2.5 1 0 0 0 E 5.0 5.0 5.0 E 5.0 5.0 5.0
2 2.5 2.5 2.5 2 0 0 0 C 0.5 0.4 0.4 C -9 5.0 5.0
3 5.0 5. 0 2.4 3 0 0 0 B 5.0 5.0 5.0 B 5.0 0.2 0.2
4 5.0 5.0 0 4 -9 -9 -9
5 0 0 0 5 0 0 0
6 0 0 0 6 0 0 0
7 0 0 0 7 0 0 0 Q303 (DTA114TS) [V] Q407, 408 (2SD2114K) [V]
8 0 0 0 8 9 9 9 Pin MODE Pin MODE
9 0 0 0 No. STOP PLAY REC No. STOP PLAY REC
10 5.0 5.0 0 E 5.0 5.0 5.0 E -9 -9 -9
11 0 0 0 C 0. 9 0.8 0.8 C 1.1 -9 -9
12 5.0 5.0 5.0 B 5.0 5.0 5.0 B -9 3.7 3.7
13 0 0 0
14 2.5 2.5 2.5
15 2.0 2.0 2.2
16 0 0 2.5
17 5.0 5.0 5.0
Q304 (DTC114ES) [V] Q409 (2SD2114K) [V]
18 5.0 5. 0 5.0 Pin MODE Pin MODE
19 0 0 0 No. STOP PLAY REC No. STOP PLAY REC
20 2.1 2. 1 2.1 E 0 0 0 E 0 0 0
21 0 0 0 C 2.0 - - C 0 0 0
22 0 0 0 -0.1 to B 0.6 -0.7 -0.1
B 0.2 0
0
23 0 0 0
24 5.0 5.0 5.0
25 0 0 0
26 5.0 5.0 2.4
27 2.5 2. 5 2.5
28 2. 5 2.5 2.5
Q401 (DTC124ES) [V]
Pin MODE
No. STOP PLAY REC
E -9 -9 -9
C 1.4 -9 -9
B -9 2.0 2.0
44
CR200
45
CR200
Terminal Initial
No. Symbol I/O Function
Description Voltage
41 P33/SI/SBI MSI I L Clock sync serial transfer data input
42 P34/SCK MSCK O H Clock sync serial transfer clock output
43 NC GND - - Not used.
It goes LOW when in the communicaation between LC89585
44 P80/T000 XFUSE I H
and mode controller.
45 P81/T001 GFS I - GFS input (It goes HIGH when GFS is okay.)
46 P82/T002 ECLV O H Spindle servo EFM/Wobble CLV mode
47 P83/T003 CLV O H Spindle servo CLV/CAV mode
48 P84/T010 SPSQ O - Spindle drive PWM output when in the spindle CAV.
49 P85/T001 MREQ O H It goes LOW when seiral hand-shaking.
50 RESET XRST I - It goes LOW when reset signal is input.
51 X1 CLOCK I - Crystal connection terminal for system clock oscillation
When feeding an external clock, it should be input to X1
52 X2 CLOCK - -
terminal.
53 NC GND - - Not used.
54 Vss GND - - GND terminal
55 WDTO NC O L Not used.
EFM decoder. It goes LOW when reading subcode Q is
56 P00/RTP0 XSUBQE O L
enabled.
57 NC GND - - Not used.
58 P01/RTP1 XENCE O L It goes HIGH when LC89585 serial enable is output.
59 P02/RTP2 XASYN O L ATIP frame sync. LOW.
60 P03/RTP3 XEXSC O H It goes LOW when LC89585 external sync enable is output.
61 P04/RTP4 SSO O L Serial data output for SONY servo IC command.
62 P05/RTP5 SSCK O H Seiral clock output for SONY servo IC command
63 P06/RTP6 XLT O H It goes LOW when SONY servo IC command is latched.
64 P07/RTP7 RECE O L It goes HIGH when laser diode recording power is on.
65 EA Npp EA I - It is used as an internal ROM mode with connecting to +5V.
66 Vss GND - - GND terminal
67 P93/TMD RAME O H It goes HIGH when the external SRAM is enabled.
It goes LOW when servo system IC mode control reset signal
68 P92/TAS XSVRST O L
is output.
69 P91/WR XWR O L Strobe signal output for external memory writing operation
70 P90/RD XRD O L Strobe signal output for external memory reading operation
Signal to externally latch the lower address signal for
71 ASTB ASTB O -
accessing the external memory
72 P40/ADD AD0 I/O -
73 P41/AD1 AD1 I/O - Data address line
74 P42/AD2 AD2 I/O -
46
CR200
(2) External port output from IC207 (PDJ006A) on the SERVO UCOM BOARD ASSY
(External RAM area (8000H ~ 8FFFH))
Terminal Initial
No. Symbol I/O Function
Description Voltage
45 POA0 LDPW0 O L LSB
46 POA1 LDPW1 O L
47 POA2 LDPW2 O L Setting of 5-bit (D/A output) recording laser power
49 POA3 LDPW3 O L
50 POA4 LDPW4 O L MSB
It goes LOW when the tracking error envelope reset signal is
51 POA5 SSEL O L
detected.
52 POA6 - O L Not used.
53 POA7 LJUMP O L It goes HIGH when in the N track jump operation.
54 POB0 LIN O L It goes HIGH when in the loading close operation.
55 POB1 LOUT O L It goes HIGH when in the loading open operation.
56 POB2 KOJK O L Turning on/off of laser axis switching circuit
57 POB3 EECS O L EEPROM data writing/reading enable output
59 POB4 - O L Not used.
Focus offset switching output. It is LOW when searching and
60 POB5 FC OST O L
HIGH when in the mode other than searching.
61 POB6 STCN1 O L Strategy control output 1 (Refer to the table below.)
62 POB7 STCN2 O L Strategy control output 2 (Refer to the table below.)
63 POC0 TEG0 O L LSB
64 POC1 TEG1 O L Tracking error amp gain adjustment
65 POC2 TEG2 O L
66 POC3 TEGM O L MSB
67 POC4 DIRC O H It goes LOW when DIRC is output from SONY servo IC.
69 POC5 XCDMIR O H Mirror detection circuit select SW. CD R/ CD
70 POC6 XLDON O H Laser diode OFF/ ON
When it is HIGH, signal is muted at last stage of audio path.
71 POC7 XAMUTE O H (It depends on mode controller instruction.) While in the REC
PAUSE / STOP mode with input switching, mute is turned on.
* According to the characteristics of CD-R disc, the CR200 switches the recording EFM. There are 4 kinds of pulse
(strategy) and they are controlled by the above mentioned output 1 and 2 (STCN1 & STCN2).
STCN1 STCN2 Strategy Type
0 0 EFM1
0 1 EFM2
1 0 EFM3
1 1 EFM4
47
CR200
ATIP decoder
RAM
IC207
DIRC (To servo LSI) XCE0 XCE
IC352
Audio final stage mute PDJ006A
Addresses 9000 to 9FFF
Tracking error LH5116NA-10 2 kbytes
gain adjustment
XLT, SENS
Strategy control 1 IC356 SSO, SSCK
Strategy control 2 ATIP
Loading open PD4786A
Loading close
FG
SPSP SSO
ECLV SSCK IC206
CLV XLT
SCOR CXD2500BQ
Spindle SENS
circuit RECE
ESYN
EXSC OPEN XFUSE MSCK, MSI
CLMP MREQ MSO, XSUBQE XRESET
MACK XENCE
MSI
Serial bus SW Serial bus SW
Loading SQSO
mechanism SQCK
IC357 IC358
TC74HC367AF TC74HC367AF
XFUSE
MREQ
MACK
MSO FSO, FSI Mode control
MSCK FSCK, LCE microprocessor
DO
DI XFUSE
CE IC351
PD4760A9
IC301
LC89585
CD encoder LSI
(AUDIO DIGITAL BOARD assy)
48
CR200
No Confirmed by
Is battery okay ?
RAM (IC352) checksum.
No
1 4
SETUP STOP SEARCH
¥Seek to TOC area. ¥Turn off servo. ¥Search to requested track
¥Turn on Focus servo. ¥Stop spindle. no. or ABS time.
¥Spindle kick and turn on CAV servo. ¥Seek to end of TOC area. ¥Turn off mute.
¥Distinguish disc. (Home Position)
¥Adjust tracking gain.
¥Turn on Tracking servo.
¥CD Turn on Spindle EFM servo.
¥CD-R Turn on Spindle Wobble servo.
End End
No
Is disc CD-R ?
Yes
2
PMA read
¥Search beginning position of PMA. 1
¥Read PMA data.
2
3 Search to 00:00:00
¥Search absolute time 00:00:00.
¥Measure disc rotation ratio. 3
PLAY
1 4
49
CR200
SETUP
¥Seek to TOC area.
¥Turn on Focus servo.
¥Turn on Spindle servo (CAV).
¥Turn on Tracking servo (CLV).
Operation image
SEARCH
1 Track count search
Using N track move, search to destination coarsely.
This operation is repeatedly executed unless
position is closed within 500 track. Zigzag search is
used afterwards.
1
PAUSE Unit actually locates to
the position 5 frame before Distance
desired destination.
No Desired
No Destination ?
2
1 track REV jump
Yes
About 16 - 96 track
End
(PLAY mode) 3
About 10 track
4
1 track
50
CR200
Start recording.
SETUP
SEARCH
Search section to be recorded continuously
(end of last recording section).
Reproduce
RF waveform
(AC coupled)
REC - PAUSE
Yes
REC request ?
No
No Pass through
end of recording
section ?
Yes
1 track REV jump
REC
End
(REC mode)
51
CR200
No
CD-R disc ?
Yes
Yes
SEARCH
Search section to be additionally recorded During these operations,
in PMA.
PMA REC
Record PMA data additionally. will blink.
STOP
¥Turn off servo controling.
¥Stop rotating spindle.
OPEN
¥Release disc clamper.
¥Open disc tray.
End
(REC mode)
52
CR200
2)
XRST (IN)
3)
XPFAIL (IN)
4)
RAME
5)
XSVRST
MACK (IN)
XTAL OFF
POWER (IN)
XRST (IN)
XPFAIL (IN)
About 100us
XSVRST
About 5ms
RAME
1) If power supply voltage drops and at a certain level, XPFAIL goes ÒLÓ.
2) When XPFAIL is at ÒLÓ, the unit is in internal interruption mode and the Current Operation mode and disc data wiill be backed up.
3) At the same time, XSVRST goes ÒLÓ and the servo circuit will be reset. RAME goes ÒLÓ and the external SRAM will be disabled.
4) XRST also goes ÒLÓ and is reset.
CAUTION : If XRST goes ÒLÓbefore RAME goes ÒLÓ, value of backup RAM (IC352) will not be memorized correctly.
53
CR200
3 Seek track 0
Carriage moves toward the TOC area (Home Position).
Carriage movement will be decided by the TOCP condition.
Start the operation 1 .
Start the operation 2 .
Move to Move to
Signal Move to inner direction STOP
inner direction.
outer direction. at slow speed.
Command
23 : Tracking OFF
Slider REV 22 : Tracking OFF
Slider FWD 23 : Tracking OFF Slider FWD
30 : Slider at slow speed command
4 Focus ON
FCSON
(Servo signal)
600ms 600ms
FOK
BUSY
(Decoder 200ms
internal signal)
Command
54
CR200
START
No
Calculate 9 times ? No
Calculate 9 times ?
Yes
Yes
•SSEL output L = TEPP hold circuit is reset.
•SSEL output L = TEPP hold circuit is reset.
Yes
RF signal ?
TEPP value in the Yes
Optimum STEP in the CD/CD-R
No •Recognize disc as at optimum range ?
CD temporarily.
No
•Present STEP is memorized
•Recognize disc as CD-R temporarily.
as Optimum STEP and the
adjustment will be completed.
55
CR200
(10) Tracking Gain Adjusting Timing Chart (11) Loading Control for Turntable
Optimum TEPP value : 2.494V ± 0.103V (2.372 - 2.649V) OPEN/CLOSE control & SW condition
2.26V ± 0.103V (2.157 - 2.372V) The figure below indicates the relationship of loading
input/output by the timing chart.
1) Example when the gain increases to the maximum
after the disc gain decreases.
Optimum
TEPP value Loading
OPEN In between CLOSE
condition
TEPP 7 STEP 13 STEP
About 200ms About 200ms
XCLMP
SSEL
SSEL
TER 1
Spindle
rotation
speed 2
CVL (H)/
CAV (L) 3
EFM (H)/
WOBBLE (L)
4
CAV
WOBBLE CLV WOBBLE CLV
MODE STOP CAV EFM CLV CAV WOBBLE
CLV EFM CLV CAV WOBBLE
CLV
EFM CLV CAV STOP
Accelerate
Spindle
Search Search Search STOP procedure
Focus completed completed completed completed
ON
Start searching Start searching Start searching Start
track 1 track 10 track 1 STOP procedure
56
CR200
57
CR200
Terminal Initial
No. Symbol I/O Function
Description Voltage
19 P73 LED5 O H Not used.
20 AVSS GND I - Connected to GND.
Serial communication for mode controller. It goes LOW when
21 P1 7 XFUSE O H
in the communication.
22 P1 6 - O L Not used.
23 P1 5 FSLAT O H CE for PDC020A. L : select
24 P14 XTALOFF O L XTAL on : L. OFF : H
25 P13 XEMP O H Emphasis controlling. L : Deemphasis
26 P12 XRST O L ATIP decoder reset output for mechanical controller
27 P11 - O L Not used.
28 P10 PRIM I - Parallel remote controller key SW input (A/D input)
29 AVDD VDD - - Connected to VDD.
30 AVREF VDD - - Connected to VDD.
31 P04 SLCT SW I - Not used.
32 XT2 - O - Not used.
33 VSS GND - - Connected to GND.
34 X1 - I - Oscillator for system. 4.19MHz
35 X2 - O -
36 P37 PREQ O - Not used.
37 P36 DIN SEL I - Not used.
DIP SW2 (Infra-red remote controller operation prohibit SW)
38 P35 RMCN SW I -
H : PROHIBIT
39 P34 CP BIR1P I - DIP SW3 (Copy Bit select SW 1)
40 P33 CP BIT0P I - DIP SW4 (Copy Bit select SW 0)
41 P32 MACK O H Communication reply for mechanical controller
42 P31 LREQ O H LC89585 CE signal
43 P30 UNLOCK I - Detecting digitally unlock condition.
44 INTP3 DIGOUT I - Digital output ON/OFF. H : ON
45 INTP2 XPFAIL I - Detecting power down. L : Power down
46 INTP1 MREQ I - mechnical controller communication request (interruption)
47 INTP0 REMIN I - Remote controller input (interruption)
48 IC VPP I - Connected to GND.
49 P72 LED2 O L Not used.
50 P71 LED1 O L REC indicator LED. L : ON
51 P70 LED0 O L Manual track increment permission. L : ON
52 VDD VDD - - Connected to VDD.
53 P127 SCAN4 O L Key matrix output 4
54 P126 SCAN3 O L Key matrix output 3
55 P125 SCAN2 O L Key matrix output 2
56 P124 SCAN1 O L Key matrix output 1
57 P123 SCAN0 O L Key matrix output 0
58 P122 KEYIN3 I - Key matrix input 3
59 P121 KEYIN2 I - Key matrix input 2
60 P120 KEYIN1 I - Key matrix input 1
61 P117 KEYIN0 I - Key matrix input 0 (Used as test mode SW as well)
62 P116 - O L Not used.
63 P115 - O L Not used.
64 P114 - O L Not used.
58
CR200
Terminal Initial
No. Symbol I/O Function
Description Voltage
65 P113 SEG10 O L FL segment output 10
66 P112 SEG 9 O L FL segment output 9
67 P111 SEG 8 O L FL segment output 8
68 P110 SEG 7 O L FL segment output 7
69 P107 SEG 6 O L FL segment output 6
670 P106 SEG 5 O L FL segment output 5
71 VLOAD VLOAD - - VLOAD
72 P105 SEG 4 O L FL segment output 4
73 P104 SEG 3 O L FL segment output 3
74 P103 SEG 2 O L FL segment output 2
75 P102 SEG 1 O L FL segment output 1
76 P101 SEG 0 O L FL segment output 0
77 P100 GRID 10 O L FL grid output 10
78 FIP9 GRID 9 O L FL grid output 9
79 FIP8 GRID 8 O L FL grid output 8
80 FIP7 GRID 7 O L FL grid output 7
DIN1 - 4 DIR
DTT DITOUT
DACDATA,
FADER MUTE DACBCK,
CDDATA, DACLRCK
CDBCK, DATSEL
CDLRCK LEVEL
METER
ADCDATA
ADCSTBY
MEMCON A9-0, DO4-1,
ADCCLK,
RAS, CAS,
ADCBCK,
ADCLRCK OC, WR
DACCKOUT
CLKSEL
JITVCOIN ENCCKOUT
ENCPCO,
CJSDATA, ENCLPFI,
CJSBCK, CJS PLL
CLKGEN ENCLPFO,
CJSLRCK ENCERR
JITPCO,
JITLPFI, ENCVCOIN,
JITLPFO ENCCK,
JITERR RAM RFDET,
CDENC RECEN,
XTALIN EXTSYNC,
SUBCODE EXTACK,
ATIPSYNC,
XTALOUT SUBSYNC
MICON EFM,
RESET I/F STRATEGY DEC3T, DEC4T,
XSAMPLE
DRAMSW CCB,
CE, CL, DI, DO
59
CR200
60
CR200
Terminal
No. I/O Function
Description
41 VDD - +5V power suply voltage
42 DACCKOUT O DAC system clock output
43 ENCCKOUT O CD decoder system clock output
44 CDDATA I CD decoder data input
45 CDBCK I CD decoder bit clock input
46 CDLRCK I CD decoder LR clock input
47 CDTX I Input signal from CD decoder output
48 DITOUT O 2 phase modulation output
49 TP6 I For testing
50 XRESET I System reset input. L : Rest
51 TP7 I For testing
52 XCAS O DRAM load address strobe signal output
53 XOE O DRAM output enable signal output
54 A8 O
55 A7 O
56 A6 O
57 A5 O DRAM address output
58 A4 O
59 A3 O
60 A2 O
61 VDD - +5V power suply voltage
62 VSS - GND
63 A1 O
64 A0 O DRAM address output
65 A9 O
66 XRAS O DRAM column address strobe signal output
67 XWR O DRAM read/write signal output
68 DQ2 I/O
69 DQ 1 I/O DRAM data input/output
70 DQ4 I/O
71 DQ 3 I/O
72 TP0 I
73 TP1 I For testing
74 TP2 I
75 TP3 I
76 ENCVCOIN I Clock input for encode circuit
77 ENCLPFO O LPF output
78 ENCLPFI I LPF input
79 ENCPCO O Phase comparison output
80 ENCERR O Lock condition monitoring signal output. H : UNLOCK. L : LOCK
61
CR200
Terminal
No. I/O Function
Description
81 TP4 O For testing
82 TP5 I
83 XRFDET I RF detection signal input. H : No RF. L : RF exists.
84 RECEN I REC enable signal input. H : REC enabled. L : REC disabled.
85 TP8 O Test terminal
86 DET4T O 4T detection signal output
87 DET3T O 3T detection signal output
88 EF M O EFM signal output
89 VDD - +5V power supply voltage
90 VSS - GND
91 ENCCK O Encode clock output
92 XEXTACK O ATIP sync notifying signal output
93 XEXTSYNC I ATIP sync enable signal inut
94 ATIPSYNC I ATIP sync signal input
95 SUBSYNC O Subcode sync signal output
CPU interface method selecting signal input.
96 CCB I
H : Sanyo CCB format. L : Common serial format
97 CE I CPU interface chip enable signal input
98 CL I CPU interface data transfer clock input
99 DI I CPU interface data input
100 DO O CPU interface data output
Output
VOUT 3 4 VCR
Circuit
62
CR200
FL INDICATOR TUBE
PATTERN AREA
Pin Connection
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Connection F1 F1 NP P P P P P P P P P P P 11G 10G 9G
a b c d e f g h i j k
Pin No. 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Connection 8G 7G 6G 5G 4G 3G 2G 1G NP NP NP NP NP NP NP NP F2 F2
NOTES : 1) F : Filament 2) G : Grid 3) P : Anode 4) NP : No Pin
Grid Assignment
11G 10G 9G 8G 7G 6G 5G 4G 3G 1G
a h a i a h a i a h a i h a i h a h a i
e k k
h f h h f
f b f g g b f b f
g b
f
b f b i f b f h
g b g g
c b b g g
g k g g g g g k g g g c c
i
i
e j c e h c e c e h c e j c e j c e c e h c
k k
d d d k d j d d d k d j d d e j
j i i i g e c a k h
i
k j j j j j j j
b
a
j k k k h f d b
3G 9G 7G 2G
Anode Connection
11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G
a a a a a a a a a a
b b b b b b b b b b
c c c c c c c c c c
d d d d d d d d d d
e e e e e e e e e e
f f f f f f f f f f
g g g g g g g g g g
h h h h h h h h h h
i i i i i i i i i i
j j j j j j j j j j
k k k k k k k k
63
CR200
5.3 DISASSEMBLING
(1) REMOVE THE TRAY PANEL (3) REMOVE AND SET UP THE HEAD BOARD ASSY
Hold the tray panel with your hands as shown in Fig. 1, and 1. Remove the rack mount angle L, R and bonnet.
grasp the tray with your thumbs and then lift the tray panel 2. Remove the tray panel (Refer to section 1).
up while pulling it toward you with the other fingers. (Fig. 2) Remove the five screws of the front panel and remove a
3. screw of HEADPHONE BOARD ASSY.
4. Remove the under panel to sliding it towards the right.
(Right side)
Front panel
HEADPHONE
1 BOARD ASSY
Tray panel
1 3
3
4
Rack mount 3 3
Rack mount
angle L 4 angle R
Under panel 3
Fig. 4
5. Pull out the right side of the front panel to the front and
remove the four screws of the board.
Fig. 1
Screw
HEAD BOARD
ASSY
Pull
Front panel
Fig. 5
Fig. 2
6. Remove the fixtures of the wires connected to the board
(cord holder, PCB binder).
7. Place the HEAD BOARD ASSY upright against the slit
(2) INSTALL THE TRAY PANEL of the float base.
HEAD BOARD
Align the tray panel with the grooves located at both edges ASSY
of the tray. And then press it down till it stops. (Fig. 3)
Slit
Cord holder
Loosen
(Unfasten the
fixed wire rod)
Tray panel
Tray Float base
Servo mechanism
Slit
assy TT
Fig. 3
Fig. 6
64
CR200
6.1 PACKING
(1) PARTS LIST
Mark No. Description Part No.
1 Audio cable (L : 1.2m) 8276 9120 00
13 2 Owner's manual, CR200, ENG 8288 4070 00
NSP 3 Caution
4 Remote Control Unit 8270 8290 00
NSP 5 Battery Cover
1
NSP 6 Dry Cell Battery (R03,AAA)
NSP 7 Polyethylene Bag
6 NSP 8 Sheet
9 Packing, L, CR200 8228 4430 00
10 Packing, R, CR200 8228 4440 00
4 11 Carton, inner, CR200 8228 7180 00
5 NSP 12 Top Plate
7 13 AC Power Cord, USA 8276 9100 00
AC power cord, EUR 8276 9110 00
3 14 Carton, outer, CR200 8228 8970 00
9
12
FR
ON
T
8
10
11
14
65
CR200
66
6.2 OVERALL EXPLODED VIEW
103 60 54
63
7 19 101 100 102
(1/2) 99
19
11
69 60
101 D
43
52 60 101 4
60 53
61 7
39 34 CR200
40 45
(2/2) EUR Only 113
44 111
35
M
104 R 56
38 56
Y
AA 63
61
19 CR200
46 5 J USA Only
27 48 84
51
32 17
Refer to
57 CR200 USA Only 119
56 "2.3 LOADING
42 37 P MECHANISM ASSY TT" 18 58
117 81 91 P
14 G 57 N A 119
* 18 8(1/2) 57 U
18 26 107
68
33 59 108 56 18
Note * : AA 12 H 13 86
Accessory of No.4. 19 83
84 57
57 110 37 31 CR200 80
118 U M 58
30 18 EUR Only
15
K 22 G 16 N 62
57 112
88 66 114
J 9 8 Z
6 (2/2) 18 55 B 57 18 58
97 F L
CR200 2 C 84
59 H 58
82 92 USA 116 31 E A 79
F
Only 24 S
63 75
57
29 19 19 57
V
K I E 85
73
20 Y
I 19
74 20 18 B C 78
95 76 L W
18 Q Z Q
36 X
23 T
S T 57
93 R O 3
64 1 V 21
115 64
28 72 X 21
93 57
105
67 18
37 25
87 87 W 72
41 28 Rear
74 Front
10
58 57 67
47 89 D
57 106
67
77
74 84
O
18 71
94 97 71
98 90
18
70
96
63
58
CR200
67
68
CR200
6.3 LOADING MECHANISM ASSY TT
50 45
40
15
59(2/2)
47
48
58 49 47
36
35
29
21
38 43
25 21
56
65 2
51
A
44
41
64
63
32 52
42
54 28 39
A 30 34
53
31 20
13
14 10 37
14 58 20
21 33
12 19 45
58 46
18
27 21 45 45
26
21 59(1/2)
32
62 44
22
9
61
5 11
6
55
8
16
7 4
17 1
17
57 24
57
3
23 24
CR200
69
70
CR200
PWZ3656
9
C8011
R
9
PWZ3655
C8009
C8010
C8012
L3001
1
C8008
CN3002
C8007
CN8005
CN8004
C3004
4
1
1
RY8001
1
8
RY8002
C8004
NP RY8004 RY8003 NP
IC3001
SK3 V0
C8005
4
5
NP
L8002
1
L8003
6.4 PCB PATTERN
CN8003
SK3 V0
NP
KN3710
PWZ3379 PWZ3659
PWZ3466 PWZ3660
PWZ3658 PWZ3661
R L8004
L8005
C8006
C8003
KN8001
C8002
L8001
L8006
C8001
JA3001 JA8002 JA8001
PWZ3378 PWZ3653
PWZ3465 PWZ3654
CN3702
C3709
S8001
L3704
S3701
3 1 1
R
8 3
SK3 V0 10 R8058 R8059
R8057
5 4 4 4
R8060
7 2 R8054
R3731 C3708 JA3001 JA8002 JA8001
4 R8051 R8033
2 3 R8034 R8056 2 3 2 3
6 1 C8017
R3001
R8052 1 1 1
R3717 D3704
R8030 C8018
R3709 C3001 CN8003 R8005 R8009
SPACER
C3715 R8010
2. GND 1 R8029
3. V-12
Q3704
R3726
C3006
R3716 R3004 R8003
R3708 R8008
CN3002 R8004 R8001
1. DIN R8002
C3714
Q3703
2. GNDD
D3703
R3725 R8012
D8003
1
8
R8014
C3750
3. V+5D
R8013
1
CN8005
R3715
1
CN8004
4. GNDD R8020
D8004
R3707 R8011
R3719 C3005 P.LIN VRLIN
D3705
LGND GNDA
Q3702
D3702
R3724 C3713 C3716 C8021 VRLOUT
D8002
D8001
C3705
C8016 GNDA
SPACER
R3714 Q3701
D3701
R3723 C3712 R3720 C3717 R8024 RGND
8 1 R8023
R8016 8 1
R3722 VRROUT
C8014
Q3706 RGND
D3706
R3728 R3711
R8053 R8022 P.RIN
Q3708
1
9
R3730 R3712 1
D3708
9
D3707
Q3707
CR200
71
CR200
C298
C1221
C1222
R295
R294
C283
C284
R274
R273
L201
R333
R1320
R1319
R1318
R5027
R293
C1307
C1308
0521R
R1203
R277
1521R
R264
R265
R263
IC359
R276
R275
C292
R283
R298
R1207
R278
CN1
1. V+5D
2. GNDD
3. WIRED
C285
C291
R261 R272
C1402
R1392
J209
R271
J208
1. CDLRCK
2. CDBCK
1. XRFDET 3. CDDATA J3502
2. RECE J209
4. GND 1. STCN2
3. XSAMPLE
R1317
5. CDTX 2. STCN1
4. GND 6. GND
5. EFM DATA 7. CL
R9999
6. GND 8. DI
24 IC352 S-RAM
R1391
7. 4.32M 9. DO
[1] 10. ENCE
8. GND
16 IC204 9. XEXTSYNC 11. FSCE
R1363 10. ATIP 12. DEEM
IC363 13. XMUTE
IC362
11. SUBSYNC
12. GND 14. RESET
13. DACCKOUT
14. GND
15. UNLOCK
C1304
R386
R387 R388
J208
C280
R384
R385
R1245
1
CN203 1
1. V+U
C239
2. DGND 74
C357
3. A+5V
4. AGND
5. A-5V Mechanism
controller
EFM [Play]
IC356
57
C1231
R1210
Q14 56
R1208
C356
C1309
R15
R9
R1355 C355
C1232
Q13
R1216
R1389
37
R1209
J210
D210 9. FCSCON
AGND 38
8. TRKCON
R1390 7. FG
C274
6. SLDCON
5. REFV
R321
R5010
R5014
C5013
R5012
EFM [Play]
4. SPDLCON
R1309
R1359
R10 3. LOUT
2. LIN
C275
1. LDRV
C1310
R5015
C5019
V
C5011
R
F
R5020
[1] J201
8 13. TE
IC5008
R240
12. FE
C242
R231
R230
11. WBL
J210
10. HF
1
J201
9. RF
4 8. AGND
C5017
Q202
C234
Q203 7. TOCP
R375
R1316
CN5002 6. EFM
5. DGND
4. XSAMP
R5009 R5003
R376
C1301 R5001
3. RECE
2. LDPW
R1361
D206 1. XLDON
C233
R5005
C5004
C294
41 40
C352
R1362
R1314
R1313
R1312
R1311
R1310
C295
25
64 24
R351
C18
R17
R1306 R1307
R1305 R9998
R352 65
R9997
80 1
IC351
Mode Controller
R5050
R372
R371
R362
R363
R364
R365
R366
R367
R368
R369
C247
C248
C249
C250
C251
C252
C253
C254
C255
C256
C257
R370
72
CR200
73
74
CR200
C470
C471
R467
C463
C464
R468
Q409
R1331 C1401
C845
D402
Q407
C376 L313
Q410
R460
D403
C332
C378
C368
L329 C342 R462 R459
Q408
R466 R465
L311
L312
L405
C1331
C1403
R464 L406
C369
R439
C801
R808 R440 R461
L328
R810 C821 C340 R452 R463 R451
D5V
C804 R1328 L314 R458
C808 1 R457
1
R807 R454 L404
1
C803
Q302
R442
R1325
R809 C468
5 Q411 R453
R482
R481
4 8 R1321
C467
C326
R332
IC307
1 R1326 12 V+12
Q412
R443
R811 C380 R416 C434 R441 V-12
R814 R410 R412 C474
V-12
9. VRRIN
8. AGND
7. VRROUT
6. AGND
5. GAUD
4. AGND
3. VRLOUT
R414 C432 C401 C437 R419
D5V
R423 R421
2. AGND
1. VRLIN
C810 R813 L317 C438 R420 C435 R417
CN801
8 R424 R422
V+12
R812
C807 C436 R418
5 4 C5801 R415 C433
C327
GAUD
R409 R411
RGND
P1
LGND
L310
C336
R413 C431
L309
C5802
R824 R821 C338 C334 C321 R485
R822 R823
V-12
L303
L301
L302 C428
R826
V+12
V+12
C420
K
C427 C419
D804
R825
D802
R820 R819 C809 R1322 C424 C406 C423 R406
D5V
K
R818 C364
C303
C415
R815
R817
C815
C307
C391
D5V
K
D5V L319
Foil Side of AUDIO DIGITAL BOARD ASSYS
L304
D801
C816
D803
C413
D301
D5V
C416
R816
14
15
C414
L306 C469
R832 R827 C405
D5V
R319 C477
C311
R407
C846
C408
C325 C407
R318 R310
C836
C403
R405
R404
R403
R401
R402
V+12
D5V
V-12
Q304
L308
R486
L401
C834
D5V
4231R R500 R490
28
GND
1
C383 R502
C5317 R408
12. DEEM
13. XMUTE
14. LRST
IC801 C344 GND
C820 C819 C831 V C478 R492 R493
D5V
C322
C849 V+V+ V-1 -1
1212 2 2 C313
7. CL
8. DI
9. DO
10. ECE
11. FSCE
C316 C402 C445
R497
R496
R489
R495
D5V
CN302
C446
L305 L316
1 P1'
1. CDLR
2. CDBC
3. CDDA 5. CDTX
4. GND 6. GND
C320
16 1 3
DATA 12 12
C373 V+12 V- V+
14 V-12
CN301
C349 C350 C371 C372 7
1 1
OFF
1. XRFD
2. RECE
3. XSPM
MHZ
4. GND
5. EFM
C375 C374 C365 V-12
1. LCH
2. GAUD
3. RCH
V+12
CN303
6. GND
7. 4.32
8. GND
9. XESC
7. GND
6. V+5D
5. GNDA
4. V+5A
3. V-AU
2. GAUD
1. V+AU
V-12 V+12
CN401
V+12
10. ATPS
11. SUBS
12. GND
13. ECKO
14. GND
15. UNLK
16. X'TAL
CR200
75
Foil Side of HEAD / STRATEGY / REC VR / HEADPHONE / MECHANISM BOARD ASSYS
R220
C222
C225
R219
L462
VR105 VR115 VR104 2. GNDD
GND
C1489 1. EFMOUT
R121
R120
S R122
6
C396
+5V 1
Q115
C187
1 2
-5V
R1103 Q117
C119
C3519
Q102
C1485
C1488
C114 C112 C1468
C146 C223
1
1
R1101
C129
D103
R3551
C220
Q3502
C111 C141 R3504
C145 C110
L461
C1463
IC339
C109 R3508
Q116
C229
20
Q3501
R1102 R226 R3552 R3503
R104 21 C108 C106 VR108
R137
R105 C142
1 2
C137 C107
R108
R107
R3506
R106
C115
2. STCN1 R3558
35 1
R102
R101
C104
R154
R3514
IC101
Q109
R126 C138
R128 C130
C132 R125
R127 C131
R124
1
Q105 R228 R153 C228 2. V+5D
R227 1. GNDD
Q104
R3513
R150 R222 C232
Q101
R4
IC338
R3518
1 2
R3 R147 R152 C231 R225
54 R3511
R110 55 VR119 R146 R3512
R131 VR107 R3531
C124
Q103 D110
R132 VR1 R116
PB2
C123
C122 R3527
R151
C120
Q3507
R224
Q108 R7
R133 R112 R158 R1323 R3526
R139
VR10 R802
C139 C128 R3525
C149 R118 R142 R801
C103 C3502 R3535
1
R141 R117
D101
Q3506
1
VR111 R115 R145 2. VCOCON R3524
VR103
1. VCOIN
R3521
R3533
Q110
R3523
Q120
GND
R159
VCOIN
VR112 C126
FOSEL
9 C164
LOUT
R119 VR110
LDRV
C148
LIN
SPDL
R3522
PB1
REFV
R157
+5V
SLDC
C147 R3528
TRKC
R129
FCSC
FG
7 C3521
Q3505
GND
13 R3532
1 R113 1
R114
R140
-5V
R123 AGND
TE
PWAJT
MSTE
WBL
STE
RWBL
E1-E2
F2-F1
PC1001
XSAMP
XLDON
WBL
AGND
TOCP
DGND
HF
LDPW
RF
RECE
FE
TE
HF
EFM
2. 3TOUT
5. EFMIN
IC120
1. GNDD
4. SEFM
6. MPLS
3. 3TIN
R1002
EFM
C143
LDPW
AGND
GND
RECINH
XSPL
76
Parts Side of POWER A & B / FUNCTION / POWER SW BOARD ASSYS
CN701 CN701
17. SF 25. G2 33. G10
18. SG 26. G3 34. LED4 1. REMO
19. SH 27. G4 35. LED0 2. LED1
W138
REMO W165
3. KS4
SA W164
20. SI 28. G5 36. D5V
J703
W131
W130
11 1
SF W138
SE W139
SD W141
SC W145
SB W148
21. SJ 29. G6 37. LED3 4. KS3
22. SK 30. G7 38. GND 1 5. KS2 J703
23. G0 31. G8 39. -27V 6. KS1
7. KS0
5
24. G1 32. G9
V701 8. KI3
KI1
KI2
W105 GNDS CN701 1. V+5D 5. KS3 9. KI1
1 C703
11
J701
R711 J703 2. GNDD 6. KS2 10. KI0
W114
IC701 W162 SG 3. LED1 7. KI3 11. GNDS
R712 4. KS4 8. KI2
W161 AC1 W173 SG
W116
W118
W175 SH
W178 SK
W172 AC1
W177 SJ
W160 REMO
W176 SI
W201 -27V Q704
W186
W185
W188
W159 KI0 W171 KI0 CN701
J703A
W113 GNDD KN111 9. KI2 R706
C702
W158 KI1 W170 KI1 10. KI1 REC MUTE
R714
R715
W112 LED3
C701
W179 GNDS 11. KI0 S718
D706
W157 KI2 W169 KI2 12. SA S717
L702
R CP1V0 13. SB REC
W111 V+5D W156 GNDD W168 GNDD 14. SC
J704 W182 GNDD 15. SD
W110 LED0 W167 V+5D
Q702
16. SE
1
Q701
W202
W155 V+5D W181 V+5D
KN701
C704
W127
W126
J301
W205
Q703
R713
W109 KI2 L701
R702
R703
W108 GNDD SET CLEAR ON/OFF
W187 S715 S716
S714
COLD CP1V0 R
D702 D703 KN108
5. GNDS
4. AC2
W192
J19
3. AC1
2. GNDA W183
S713
1. -27V
PWZ3051 PWZ3053 S711 S712
KN109 CN15
PWZ3359 PWZ3050 PWZ3052 1
STOP
W189 AUTO/MANUAL WRITE DISPLAY OFF PWZ3357
[ MANUAL ] OR PWZ3356 W147
W107
W106
R51
U52
R53
R52
R54
W190
TIME W146 W163
W191 INPUT DIGITAL
C52
POWER SELECTOR SYNCHRO FINALIZE CP1V0
W174
W183
C54
W152 R
S707
D54
S704 S705 S706 PWZ3602 C11
PWZ3601 W151 V+A R55
W150 V+A R57 S708 S709 S710
R56
R58 OPEN/CLOSE
W166
L21
C28 C29 C13
ICP-N10 C906 PWZ3600
J901
PWZ3599
KN105
IC908
J904.
KN106
W221
PTT1338-( /KUC )
PWZ3598
REPLACER PAR LE FUSIBLE
C72
PAR UN MODELE IDENTIQUE
IC22
J904
H91
ATTENTION
IC23
1
PWZ3596 W194
HO T
D908
D906
1
W122
1. V+AU 3. V-AU 5. GNDA 7. GNDD
J905
W115
PWZ3595
CN91
W121 L902
PTT1305-( /J ), PTT1309-( /KU ),
HOT
CP1V0
CP1V0
FU91
W180
3. V-A 6. V-U
2. GNDA 5. GNDU
1. V+A 4. V+U
J16
ICP-N10
R
ICP-N10
J110
ICP-N10
SD
IC14
W222
W223
C902
PTT1339
PTT1337
PTT1332
PTT1330
PTT1315
PTT1308
PTT1304
W132
IC907
IC904
IC12
T500mAL250V /MY
2. GAUD 4. V+5A 6. V+5D
PTT1331-( /KUC, MY )
ICP-N10
1A 125V
EN INTENSITE.
/J, KUC
IC15
J12
REPLACE WITH SAME TYPE
IC11
V+AU
V-AU
C911
PT901
C91
CN92
W128
KN102
W142
ICP-N10
V+U
SD V+5A
PTT1340-( /MY )
KN104
AND RATING OF FUSE.
IC903
1
C24 W144
/J, KUC
/ME8
KU, KC
W133
W134
C23 J
HOT
CN14
J16
(
(
(
(
(
(
(
(/ME8, MY)
T500mAL250V
W135
ME8 MY
J18
(/KUC,MY)
PTT1332 - ( /J)
V-A
/MY)
/KUC)
/J)
/KUC,MY)
/ME8, MY)
/KU)
/J)
KUC KUC
J12
CAUTION
L24
W103 ME, MY S91
HB, HP
(/KUC)
C912 PWZ3360
COLD KN107 KU, KC
(/MY)
(/KU)
J W129V+5D PWZ3361
W117
R901
L901
1A125V
J110
W102
C26
PWZ3392
(/J)
(/J)
W125GNDD
PWZ3591
PWZ3592
PWZ3593
PWZ3594
PWZ3393
W123
1
W124V-AU KN112
J92 J91 PWZ3394
CN11
D902
CN18 SD PWZ3603
R902
PTT1305
PTT1309
PTT1316
PTT1331
PTT1333
PTT1338
PTT1340
W137
PWZ3604 PWZ3605 PWZ3606
PT1
PTT1337 - ( /KUC)
PTT1339 - ( /MY)
C25
C905
PTT1316-( /ME8, MY )
ICP-N10 W149
FU11
PWZ3354
PWZ3355
PWZ3587
PWZ3588
PWZ3589
PWZ3590
PTT1333-( /J )
D903
C914 D901
C17
C16
W101 W154
DIP
IC13
D13
D11
NEUTRAL LIVE
W104
W140
H11
W153
H12
C901
C904
V+AU
C75
C915
J902
PWZ3046
PWZ3047
PWZ3048
PWZ3049
PWZ3352
PWZ3353
L23
W193
C15
C18
D14
D12
C78 SD
W120
CR200
77
78
CR200
Foil Side of POWER A & B / FUNCTION / POWER SW BOARD ASSYS
CN701 J701
17. SF 25. G2 33. G10 5. GNDS
18. SG 26. G3 34. LED4
19. SH 27. G4 35. LED0 4. AC2
20. SI 28. G5 36. DSV 3. AC1
21. SJ 29. G6 37. LED3 2. GND
1 39
30 22. SK 30. G7 38. GND
KI1
KI2
1. -27V
SB
SC
SD
SE
SF
23. GD 31. G8 39. -27V
REMO
KI0
SA
24. G1 32. G9
J703
1. V+5D 5. KS3 9. KI1 GNDS
GNDS
2. GNDD 6. KS2 10. KI0 CN701
LED3
-27V
3. LED1 7. KI3 11. GNDS 10 20 30 SG
4. KS4 8. KI2 1. REMO 9. KI2
2. LED1 10. KI1 SG AC1
3. KS4 11. KI0
4. KS3 12. SA AC1 REMO -27V
5. KS2 13. SB
SK
SJ
SI
SH
6. KS1 14. SC KI0
7. KS0 15. SD GNDD
8. KI3 16. SE KI0 KI1
KI1
REC MUTE LED3
KI2 KI2
GNDS
GNDD GNDD V+5D
REC GNDD
LED0
PWZ3579 PWZ3583
SKIP SKIP SKIP
C V+5D V+5D V+5D
D KI2
V+5D
PWZ3580 PWZ3584
ON/OFF CLEAR SET GNDD PWZ3581 PWZ3585
PWZ3582 PWZ3586
COLD
PWZ3042
PWZ3351
GNDD
E
PWZ3358
A B PWZ3383
STOP
-27V DISPLAY OFF WRITE AUTO/MANUAL
OR [ MANUAL ]
TIME
DIGITAL INPUT
FINALIZE SYNCHRO SELECTOR POWER
OPEN/CLOSE
V+A
V+A
V-A
V-A
HOT
GNDD
HOT
CAUTION
GNDA
V+5A
REPLACE WITH
GNDD
SAME TYPE AND
RATINGS OF FUSE.
COLD
V+U
V-U
GAUD
V-U
GNDD
V-AU
V+5D
HOT
V+A
V-A
GNDA
GNDD
V+AU
GNDS
SERVO SYSTEM BLOCK DIAGRAM
XSAMPLE
EFM
IC101 SERVO UCOM BOARD ASSY
(PA4022A) (A+B+C+D) 68 RF
RF AMP
(A+B+C+D) IC201 IC206
(CXA1372Q) (CXD2500BQ)
66 HF 39 EFM 32 24
HF AMP COMPARATOR LRCK, BCLK, DATA, D OUT
33 1
(A+C) – (B+D) FCS. GAIN FOK
MAIN (A+D) – (B+C)
MAIN BEAM S/H BEAM
I-V AMP TE AMP 55 47 FCS SERIAL
HE AMP DFCT SERVO DATA
MAIN
/SUB
MIN TE VR201
TE AMP (A+D) – (B+C)
SUB 43 TRK SLD 14 4 SPDL
SUB BEAM BEAM WOBBLE 61 WBL DFCT
S/H SERVO SERVO SERVO
I-V AMP TE AMP (E2-E1) + (F2-F1) AMP
29 5 11 SERIAL DATA
AUTO VR202
LD MD BALANCE TRK. GAIN
CIRCUIT GFS, SCOR
FRONT REC PW 29 RECE, XEXT, SYNC
MIRR
MONITOR S/H PB APC CONTROL 51 32
AGC
I-V AMP AMP Q110 FOK
IC205 IC205
(2SJ146) (PA9004A) (PA9004A) IC356
(PD4786A)
38 27 34 35 37 IC205 TE. LEVEL 36
(PA9004A) DET.
PB LD IC5024
LD PW 25 REC PA
(HD74HC4053FP)
7. BLOCK & CIRCUIT DIAGRAMS
D/A TEPP 22
REC LD 2 ACTU- 1
ATOR MECHANISM
LD PW LD PW 7
(PB) (REC) ACT HOLD
23 CONTROL
AMP IC5008 RFT
VR103 VR104 IC102 LJUMP MICRO-
(BA4560F) RFB COMPUTER
OSC
(BA4560F)
6 OPTICAL 7 24
IC202 AXIS
(LA6517) IC207
SERVO (PDJ006A) RAM
IC5024 KOJK
3 FCS 6 FCS CON
DRIVER (HD74HC4053FP) PARALLEL
FCS TRK CON LATCH
COIL
IC202 SLD CON
IC352
(LA6517) (LH5116NA-10)
IC207
(PDJ006A) IC205 63
1 TRK 7 (PA9004A)
DRIVER 4 EEPROM
TRK LPF ATIP 3 CD-R
COIL IC205 BPF FSCE, ENCE,
DECODER 45 38 MIRR
(PA9004A) IC360 CL, DI, DO
3 (XL93LC46AF)
PICKUP MIRR
ASSY 9 6 52
IC203 (1/3) LPF DET. XRFDET
(LA6517) 2 ATIP
CD
RF MIRR
3 SLD 1 DET. TO
DRIVER
SLD AUDIO DIGITAL
MOTOR M LPF 61 BOARD ASSY
49 IC351
51 RF LEVEL (PD4785A)
CLV, ECLV DET.
47
IC205 (PA9004A)
ATIP
TOC POS MODE
SPSP
POSITION PW0–4 AMUTE, DEEM
TEG0, 2
SENSOR CONTROL X’TAL OFF
MCROCOMPUTER
FG DIGITAL BUS
FG UNLOCK
IC203 (2/3)
4
(LA6517)
SPDL 5 SPDL
DRIVER
SPDL
MOTOR M
8 L IN
9 LOADING L OUT KEY
FL
DRIVER 7 MATRIX
LOADING IC203 (3/3)
MOTOR M (LA6517)
FUNCTION BOARD ASSY
79
CR200
80
CR200
AUDIO SYSTEM BLOCK DIAGRAM
Q403 Q405
JA801 AUDIO DIGITAL BOARD ASSY (DTA124ES) (DTC124EK)
L ch
IC402
INPUT ( PD2028B(S) ) 18 IC404 IC404
2
IC803 (NJM5532MD) (NJM5532MD) Q407
DACL
JA801 (NJM4565DD) 12 2 (2SD2114K)
R ch 1 24 LDTA LDTA 1 DE- 7 JA401
D/A ZERO MUTE L ch
WCKO CONVERTER 3 3 EMPHASIS DET. OUTPUT
IC8002 7
RELAY VR802 VR801 IC801 IC401 BCK
13 Q411 Q409
L ch IC8004 1 2 (AK5340-VS) (SM5813AP)
JA8001 (2SD2114K) (2SD2114K)
25 WCKO Q404 Q406
BALANCE RY8004 (DTA124ES)
INPUT (DTC124ES)
IC8002 7 27 A/D DIGITAL IC403
IC8001 RELAY CONVERTER FILTER 26 BCK
R ch ( PD2028B(S) )
JA8002 1 18 Q412 Q410
2 (2SD2114K) Q408
BCK (2SD2114K)
RY8003 28 12 2 (2SD2114K)
IC8003 REC REC WCKO 1 7 JA402
IC804 D/A DE- ZERO
IC8001 BAL VOL 23 RDTA RDTA 3 MUTE R ch
(NJM4565DD) CONVERTER 3 EMPHASIS DET.
OUTPUT
IC8001-IC8004 : DACR
VR
DATA
STBY
LRCK, BCK
13 IC405 IC405
NJM5532DD BOARD ASSY (NJM5532MD) (NJM5532MD)
DACK
IN DEEM
JA3001 IC3001 Q402 Q401
(SN75157P) (DTA114ES) (DTC124ES)
INPUT Q413
(DTA124ES)
BOARD ASSY
HEADPHONE
33 37 IC406 BOARD ASSY
(M5218AFP)
CDTX
IC301 7
(LC89585)
EFM JA403
ENCODER CLKGEN 48 IC406 HEADPHONE
DIT
STCN2 (M5218AFP) OUTPUT
STCN1 1
JA301 1
OPTICAL
INPUT IC307 IC312 2 VR401
(TC74HCU04AF) (TC7S14F) DATSEL (HP VOL)
JA304 2 4 4 4
COAXIAL DIR FADER MUTE
INPUT IC304
(MB81C4256A-70PJ) JA303
Q301 LRCK, BCK, DATA LEVEL DRAM OPTICAL
(DTA114TS) +5V METER IC307 : OUTPUT
MEMCON IC307
SW IC306 TC74HCU04AF 8
CLKSEL
(PDC020A) 20 IC307
IC302 IC307 JA302
RAM 9 6 10
PLL (CD74HC4046AM) COAXIAL
FS IC307 OUTPUT
VCO
CONVERTER 12
CJS 4
SUBCODE CD ENC IC308 : TC74HCU04AF
5 IC309 : TC74HC00AF
PLL
XEVCO
Q304
STCN1
STCN2
COMMAND CPU I/F STRATEGY (DTC114EK) IC309
REGISTER
3
IC308 IC308 IC308
38 43 85 86 88 EFMIN
IC303 1
XOPT
XTAL
VCO
8
CDLR, CDBC, CDDA
XEVCO
(PCX1021) DET3T
VCO 17.28M
IC309
+5V STRATEGY 8
Q302 4.32M CIRCUIT IC309
(DTC124EK) SW 11
ECL, CL, DI, DO
Q303
IC309
XRFD, RECE,
ENCK, SUBS
(DTA114TS) IC308
XESC, ATPS
STRATEGY IC308
X’ TAL OFF
(TC74HCU04AF) DACK 6
BOARD ASSY
DACL
X’ TAL
ECKO
XSAM
UNLK
DEEM
MUT
EFM
DACR
1
2
1
2
3
4
5
+
1
2
M HEADPHONE
1
2
3
1
2
3
4
5
1
2
3
4
5
1
2
1
2
3
4
5
6
7
8
1
2
3
4
5
6
PDE1264-A
CN3501
B2B-PH-K-Y
173981-5
CN202
B3P-SHF-1AA
CN5021
CN104 (TP1)
BS8P-SHF-IAA
CN204 (TP201)
B6P-SHF-1AA
CN105
J3502
PG02KAE17
STCN1
STCN2
CN204 (TP202)
B5P-SHF-1AA
ACTERR
ACTIN
V+5A
XCLMP
XOPEN
LOAD
GNDD
GNDD
RF
TE
TEIN
GNDA
FEIN
FE
MNT3
MNT2
MNT1
MNT0
GNDD
CN3506
STE
MSTE
TE
AGND
WBL
RWBL
PWAJT
HF
EFM
GNDD
D20PWY0305E 1 GND
LOADING MOTOR S13B-ZR J201 CN211 J401 BOARD ASS'Y B6B-PH-SM3 2 3TOUT
1
2
1
2
TE 13 13 13 TE Lch 1 1 1 Lch 3 3TIN
FE 12 12 12 FE GAUD 2 2 2 GAUD PWZ3648- 4 SEFM
WBL 11 Rch 3 3 3 Rch 5 EFMIN
1
2
11 WBL
1
2
11
PICKUP
CN3501
B2B-PH-K-Y
CN3502
B2B-PH-K-S
HF 10 10 10 HF 52147-0310 6 MPLS
PWY1029
STCN1
STCN2
GNDD
RF 9 9 9 RF
CN3505
EFM
AGND 8 8 8 AGND PDE1284
F2 TOCPOS 7 7 7 TOCPOS
B2B-PH-K-B
4PD A
F1 20 A EFM 6 6 6 EFM 1 1 VCOIN
FPD F2
19 F2 5 2 2 VCOCON
KCM DGND 5 5 DGND
D20PWY0330E CN401
18 K XSAMP 4 4 4 XSAMP
D A FPD F1
17 F1
J212 52147-0310 J3504 CN3504
4PD D M+STE 3 3 3 M+STE
C B 16 D Lch 1 1 1 Lch PG02KA2E10 B2B-PH-K-R
4PD C LDPW 2 2 2 LDPW STRATEGY
GAUD 2 2 2 GAUD
1.25mmPITCH FPC
1 2 CN8004
CN801
J209 D20PWY1415E 52147-1410 PDE1279
R1003 CN203 B9B-PH-K-R B9B-PH-K-R
3
6 6 6 6
1 2 5 5 V-5A CL 7 7 7 CL
VRROUT 7 7 7 7 VRROUT
4
Fs CONV. CE 11 11 11 Fs CONV. CE
DE-EMPHASIS 12 12 12 DE-EMPHASIS KN302
B9B-PH-K-S
CN8005
VRROUT
VRLOUT
GNDD
CN1
WIRED
VRR IN
13 13 13
V+5D
AUDIO MUTE AUDIO MUTE
LED1
LED4
LED0
LED3
GNDD
VRL IN
PNB1558-
GNDD
GNDA
GAUD
V+5D
-27V
GNDA
GNDA
GNDA
GNDA
GAUD
V+AU
V+5D
KS4
KS3
KS2
KS1
KS0
G10
V+5A
S3B-PH-K-S
V-AU
J1001 LSI RESET 14 14 14 LSI RESET
KI3
KI2
KI1
KI0
SG
SR
SH
SD
SC
SK
SE
SB
SA
G9
G8
G7
G6
G5
G4
G3
G2
G1
G0
SF
(Screw Terminal)
SJ
SI
1
2
3
4
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
D20PWW0405E
1
2
3
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
9
9
8
7
6
5
4
3
2
1
1
2
3
PDE1278
1
2
3
4
5
6
7
1.25mmPITCH FFC
CN107
1
2
3
4
PDE1260-A
1
2
3
CN110 S6B-PH-K-S
1
2
3
4
5
6
7
8
9
GND
VA+5
TOCP
FG
J1002 S7B-PH-K-S
CN801
S9B-PH-K-S
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
V+A 1 1
1
2
3
4
5
6
7
8
9
1
2
3
VRL IN
GNDA
VRLOUT
GNDA
GAUD
GNDA
VRROUT
GNDA
VRR IN
WIRED
GNDD
V+5D
GNDD
TOCP 3 3 3 TOCPOS
V+5D
LED1
LED4
LED0
LED3
V+U 4 4
-27V
V+5D 1 1 V+5D
KS4
KS3
KS2
KS1
KS0
G10
J1001 FG 4 4 4 FG
PDF1168-
GNDU 5 5
KI3
KI2
KI1
KI0
SG
SR
SH
SD
SC
SK
SE
SB
SA
G9
G8
G7
G6
G5
G4
G3
G2
G1
G0
SF
SJ
5 5 5 SLD MT SI GNDD 2 2 GNDD
SLD MT V-U 6 6
6 6 6 SPD MT LED1 3 3 LED1
SPD MT
7 7 7 GNDU KS4 4 4 KS4
GNDU
KS3 5 5 KS3 VR BOARD ASS'Y
+ PARALLEL CN701
HLEM39R-1 FUNCTION BOARD KS2 6 6 KS2
1 2 KI3 7 7 KI3 PWZ3645-
M REMOTE ASS'Y J701 KI2 8 8 KI2
GNDD
GNDS 11 11 GNDS
GNDS
-27V
1 1 LIVE
AC1
AC2
2 1
M 2 2 NEUTRAL CN91 POWER SW BOARD ASS'Y
MECHANISM RKC-061-0
1
2
3
4
5
CARRIAGE PWZ3393- : CR200USA
MOTOR BOARD ASS'Y 2 2 NEUTRAL
PWZ3394- : CR200EUR
D20PWY0515E
1 1 LIVE CN92
PWZ3649- PDE1272-A
B2P3-VH
B2P3-VH
1
2
3
4
5
1
2
3
4
ASS'Y PXA1560 LIVE 1 1 5
NEUTRAL 2 2
1
2
3
4
5
1
2
3
4
5
6
1
2
3
4
5
V+U
GNDD
V+5A
GNDA
V-5A
-27V
GNDD
AC1
AC2
GNDS
V+A
GNDA
V-A
V+U
GNDU
V-U
Transformer PT901
CN11
RKC-061-0 CR200USA PTT1338 J16 CN17 CN15
Distinction of PITCH width
1 1 LIVE CR200EUR PTT1340 B5B-PH-K-S 52147-0510
2 2 NEUTRAL
J1 2mm PITCH 1.5mm PITCH
Transformer PT1 CN ASSY CN ASSY
J12 1 LIVE
2 NEUTRAL CR200USA PTT1337 CN
*** J
*** CN
*** J
***
V+AU 1
Noise filter with inlet POWER A BOARD ASS'Y GAUD 2
CR200EUR PTT1339 1 1 1 1 1 1
2 2 2 2 2 2
OTF1006
PWZ3587-
V-AU
V+5A
3
4
POWER B BOARD ASS'Y 3 3 3 3 3 3
3 3 3
V+5A
J904
V+U
J901
1
2
3
CR200
J904 PDE1270-A
1 V+U
2 GNDA
3 V+5A
DXWW0315E
81
82
CR200
MECHANISM & HEAD BOARD ASSYS
PWAJT
RWBL
AGND
MSTE
E1-E2
F2-F1
WBL
STE
HF
TE
CN104 (TP1)
8
7
6
5
4
3
2
1
BS8P-SHF-1AA
R1104
2.2K
R159
(TEMP. COEFFICIENT) 7
5.1K
DA114
VA+5 VA+5 4
+
D101
5 4 IC104 (2/2)
BA4560F
R1105
R163 R1106
2.2K
100K R144 2K
4.7/16
VR121
C127
R160
3.9K
10K WBL. OFS
NP
R145 15K VA+5 VA-5
RF. OFS 2
R143 VA-5
8 1 VR118
10K
VA-5 10K
3 4 VA-5
GNDA 1K R117
IC104 (1/2) 5.6K R179
VA-5 0
BA4560F
VA-5
VA-5 VA+5
VR119 47K
C140 2P CN107 S6B-PH-K-S (FROM POWER SUPPLY PCB)
YB R118
CH R147 R148 : PCN1038
1.5K
R101 R103 3K (TEMP. COEFFICIENT) VA+5
18K C102
+ 1 V+A
HF. GAIN R146 C126 100/10
VA+5 YF
2
1800P
15K R102 0.01 GNDA
C128
C125 Q115
5.6K 13K FE. OFS DTA114EK V+U
R148 3 V-A
VR105 10K
FE
2.2K 100/10 VA-5
FE-
HF-
HF
RF
C103 4 V+U
10P 68 67 66 65 64 63 62 61 60 59 58 57 56 55 R178 R111 VA+5 VA+5
CH C124 820 47K 5 GNDU
VR115
RWBL
WMON
VCC
WBL-
WBL
DWBL-
DWBL
V1
VR
C145 1 54 220P R130 : PCN1037
+ RF- CF3 10K
C101 2 53 CH (TEMP. COEFFICIENT)
PICKUP 10P RFSUM CF2 C123 220P VA-5
68 x 2 WFE. OFS
6 V-U
CH 100/10 3 52
PWY1029 HDMON CF1 CH C122 V-U
4PD A A
YB
4 51 CH 62P
VR112 10K
R121
20 R130
R120
VEE TE
R137
100K
YF
TE. OFS R126 R127 R128
C137
C105~108 62 Q117
0.01
C104 5 50 TE. GAIN 22
F2 FPD F2 F2 SL 820P IVMON TE- VR111 R110 22 22
C132 DTA124EK CN111
19 0.01 6 49 22K Q103 Q104 Q105 0.1 B2B-PH-K-Y
F1 SA MSTE
KCM K SL C105 2SA1037 2SA1037 2SA1037 Q116
7 48 39K
18 + SL
SB RTE R3 DTC114TK R1103 1
C113
C106
8 47 VR110 47K Q106 47K
EFMIN
FPD F1 F1 SC MTE Q102 B B
D A 17 100/10 SL C107
9
SD IC101 R10K
46 10K MS MIXRATE
B 2SB1189
B B 2SA1037
VA-5 2 GNDD
4PD D D SL C108
C B 10 45 C121
16 SF1 VEE VA+5
4PD C VA-5
CH C109
11
SF2
PA4022A RMAIN
44 STE
100/10 VA-5
(FROM STRATEGY PCB)
C CH C110 R4 +
15 12
SE1 STE
43
E2 CH C111 R139 GNDD
RPD E1 E1 C109~112 13 42 10K
E1 14 390P SE2 RSUB2
2SC2412K
A CH C112 E YF C144
14 41 10K C120 C131 R124 0.01
FPC
Q101
4PD B YB 2SA1461
B F1 16
F1 XLDON
39 R135 GNDA 5 1 0
12 C146 54
D 17 38 B
GND (BODY) GND 10P D XSPL VA-5 B 3 2
11 CH 18
VC REO
37 1.3K IC103 3
MDMON
PBLO
R125
CMD
SMD
R134
PBI+
VCC
PBO
R131
R132
R133
PBI-
PBL
PBL
E1 20 35 REI+ 270
MD
NC
33
E1
33
33
ACT TR TR 3.6K
VR104
9
B
R109
10K
21 22 23 24 25 26 27 28 29 30 31 32 33 34 180
ACT TD TD GNDU
8 5
R123
R106 R107 R108 GNDA CN105 S13B-ZR (TO SERVO)
0
ACT FD
YB
7
C114
C117
1/50
0.01
NP
3.3K 10K 1K 13 TE
MD K MD (K)
MD
E2
6
B
12 FE
0.1
MD AN VA+5
MD (A)
C115
R105
R119
16K
5
1M
11 WBL
YF
300MHz ± 100MHz YB
LD LD C118 YB
VR103
C141
4
0.01
OSC
10K
0.01 10 HF
R104
200K
GND GND
YF
3 + VA+5
C129 PB.PW 9 RF
PD PD
2 0.01
C139 C116 8 AGND
VDD VCC YF 0.01 10/16
1 R149
C142
47K
7 TOCPOS
CN101 VA+5 91P DTC114TS
D103 Q109
52207-2090 1SS355 CH 6 EFM
5 DGND
Q111 GNDD
4 XSAMP
DTA114TK
3 M+STE
2 LDPW
C221 V+U
47/16 1 XLDON
+
C220
0.01 IC202 (1/2)
YF
LA6517
2
- 5 GNDA
3 CN106 S10B-ZR (TO SERVO)
VA+5
VA+5 C222 6
+ 10 FCSCON
ACT. OFS 0.01 YF FOCUS DRIVER
YF
4
C223
VR1
0.01
TRKCON
10K
R136 C133
M R219 +
0.01 VR10 ACT. GAIN 47 V-U
ME R2 C224 8 FG
30K ME R12 100K 47/16
R138 12K IC202 (2/2) 7 SLDCON
2.2K YB VA-5 LA6517
2 470 C9 8
-
PWAJT 3900P - 6 REFV
8 1 1
(CN104)
3 + 4 R6 13K C225 +
7 5 SPDL
C134 0.01 YF
IC102 (1/2) TRACKING DRIVER
0.01 V+U 4 LOUT
VA+5 BA4560F YF R220
C226
3 LIN
47/16
47
C227
6
0.01
30K ME
8 +
8 R7
R161
7 YF 2 LDRV
5 4
4 47 R226
0.068 12 2 IC203 (1/3) 1 FOSEL
IC202 (2/2) -
C11 R8 LA6520
BA4560F 3
100K
12K ME
4.7K
YF
1 SLIDER DRIVER
R162
YB C135 +
C228 13 R227
0.01
0.01
YF
14
C230 - 8
YF
C229
47/16
47 V-U R228
+ IC203 (3/3) + 7
LA6520 100K
D110 VDZ6.2B
LOADING DRIVER R229
100K
R222 YF C189
100K R224 0.01
LA6520 47 R153
IC203 (2/3) - 5 47
4 X Y
R151
12K
+ 6
D20PWW0405E
C232
0.01
YF VA+5 R150 NOTE
MECHANISM BOARD ASS'Y SPINDLE DRIVER 12K
R225 R152
PWZ3649- 47 100K Capacitor without unit : µF Semi-fixed resistor unit :
J1001
VA+5 R142
PDE1260- 47K
J1002 CH Ceramic CCSQCH 2.2K : RCP1019-
PC1001
R1002
R1003
47K
1 1 1 C164 DTC144ES
YF YB Ceramic CKSQYB 22K : RCP1046-
A5V VA+5 0.01
1 2 2 2 2 TX Film CFTXA 47K : RCP1047-
TOCPOS TOC POS Electric Capacitor without indication CEAS
1 4 2 3 3 3 3 : Chip volume
FG FG 1608 type
R1001
4 4 4
270
3 SLD MT
Without indication 2125 type
D1001 4 5 5 Others
GP1S24
SPD MT Resistor unit :
6 6 : Chassis GND
GNDU
1/16W
7 7 Without indication 1/10W
+
1 2 CN110 Metal resistor RN1/10SE
M S7B-PH-K-S
YF C187
ME
PXA1560 2
M 1
PWZ3632- GNDS
SLIDER MOTOR
SERVO UCOM BOARD ASSY (1/2)
CN204 (TP201)
(B6P-SHF-1AA)
CN206
1
6
5
4
3
2
1
(TP202)
NOTE
MNT0
MNT1
MNT2
MNT3
(BS5P-SHF-1AA)
FE
FEIN
GNDA
TEIN
TE
RF
GNDD PB Capacitor without unit : µF
V+5D
R261 DOUT
1SS133X
CH Ceramic CCSQCH
V+5D 1K
V+5D SCOR A7 1 A7 VCC 24 D353 YB Ceramic CKSQYB
MCK
YF
C291 R1245 TX Film CFTXA
A6 2 A6 A8 23 A8
C359
10P
C292
100
47/10
+
C293
CH
R378
0.1
0.1
120
C210 DS GNDD GNDD A5 3 A5 A9 22 A9 M Mylar CQMA
GNDD
YF
Electric Capacitor without indication CEAS
LC3517BML-15
R377
0.01 A4 4 A4 XWE 21
47K
GNDD
YB
+ YB V+5D + C361
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
C212
0.033
C211
GNDA GNDD A3 5 A3 XOE 20 IC354 Electric 2-layer 1608 type
100/6.3
S-RAM
GNDD TC7S00F 5
IC352
capactior PCH1131
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
SBSO
SCOR
WFCK
EMPH
DOUT
MD2
C16M
C4M
FSTT
XTSL
XTAO
XTAI
Vss
APTL
APTR
MNT0
MNT1
MNT2
MNT3
RAOF
C2PO
RFCK
GFS
PLCK
UGFS A2 6 A2 A10 19 A10
28 DGND
GNDD EXCK Without indication 2125 type
26 COUT
33 FCOK
27 SENS
5
29 MIRR
25 LRST
1 2 IC355 0.22F
32 EFM
4
31 ASY
5
GNDD R298 SQSO GTOP A1 7 A1 XCE 18 4 5 3 TC7S04F
10K LRCK (64)
3 2 3 Resistor unit :
SQCK A0 8 A0 D7 17 AD7
DVcc 36
CC2 35
CC1 34
30
SQCK V+5D 3
C213 AD0 9 D0 D6 16 AD6 1/16W
48 47 46 45 44 43 42 41 40 39 38 37
Q201
13 14 15 16 17 18 19 20 21 22 23 24
MUTE
R380
BLCK (64)
R379
CB DATA DATA Without indication 1/10W
47K
0.01
47K
DTA124ES SENS AD110 D1 D5 15 AD5
YB XLT XLT SENS DATA (64) R263
C214 CP LRST 100 BCLK AD211 D2 D4 14 AD4
GNDD LRST BCLK (48)
GNDD 0.0047 R211
RFI
CLK CLK
R264 12 GND D3 13 AD3 Others
YB 3K IC201 LOCK LOCK
V+5D DATA DATA
IC206 DATA (48)
DATA
RFO XLAT 100
(FROM HEAD) XLT Vdd : Chassis GND
0.1
C285
DIRC 100/6.3
PDE1264 R17 C215 YB
DVee CXA1372Q C209 Vdd LRCK (48)
R265 LRCK
J201 TZC
AVee
CLOK
CXD2500BQ 100
: Cut wire for hand-fixing
0.0047 SSTOP CLK WDCK (48)
7.5K
TE 13 TE (SERVO YF SENS C360
C18 C216 R212 270K ISET + SE in
(DECODER) PSSL C290
0.01 GNDD
: Hole for earth lead
V-5A 0.047 TDFCT CONTROLLING) COUT 100/6.3 + YF
1000P FSET V-5A CN in NC
FE 12 C243 YB ATSC R210 GNDD DATA
JA
YB SL- 200K TEST4
R213 FZC
WBL 11 XLT
Q0 19 A0
Q1 18 A1
Q2 17 A2
Q3 16 A3
Q4 15 A4
Q5 14 A5
Q6 13 A6
Q7 12 A7
YB GNDA 10K ASYO
FE R209 V+5A CLK TEST3 V+5D J208
7 SRCH
TEST1
SLO
VCC 20
LE 11
10 AVCC
0.1 R1301 - R1304 :
VCOO
VPCO
LOCK
HF 10 510K
8 TGU
R214
5 FEO
VCOI
CLTV
9 TG2
D20PWY1615E
AVdd
11 TAO
MON
VCKI
4 FLB
AVss
FSW
MDP
MDS
FILO
CH
PDO
PCO
FDFCT
6 FE-
10K
FOK
TEST2
12 TA-
MIRR
YF
R260 47K
FILI
SL+
Vss
NC
NC
NC
NC
RF
C284
100P
100K (TO AUDIO)
RF 9 V+5D GNDD
VC 1
FGD 2
FC3 3
13
MD
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
R1301
R1302
R1303
R1304
FCOK 1 XRFDET
0.047
C283
YB S202
YB
AGND 8 C208
0.033
C217
R266 IC353
YB
C202 YB
GNDA 0.01
C204
2 RECE
R201
10K
0.1
80K
XSAMP
YB
R269
68K
0.1
6.8K
8-BIT LATCH
C201
3 XSAMPLE
C218
0.01
DIP1
47K
0.1
R139
R1356 47K
6 R207 47K
GNDD
DIP2
V+5D
V+5A 82K
10 GND
4 GND
1 XOE
R267
GNDD
R1357
5 V+5D
AD0 2 D0
AD1 3 D1
AD2 4 D2
AD3 5 D3
AD4 6 D4
AD5 7 D5
AD6 8 D6
AD7 9 D7
DGND XSAMP R203 R270 100K DIP3
3.3K DIP4 5
4.7/50
C203
XSAMP 4 FCS.GAIN
YB
R204 + DIP SW GNDD
GNDD R215 R216 270K C288 0.01
47 C286 R268 YB 6 GND
R208
10K 0.47/50
13K
M+STE 3 C206 0.047 10K
PCP1045
JA
0.1 7 4.32MHz
YB
Y 3 GNDD
C207
4.7/50
VR201
X +
LDPW 2 YB YB
47K x 8
V+5D
R381
R382
R383
R384
R385
R386
R387
R388
C219 V+5D
10K
2 C287
0.0033 8 GND
FOK
GFS
1 0.0015
XLDON 1
C358 RCH1139-
GNDD
CH
YF
V+5A 9 XEXTSYNC
TE.GAIN
10 ATIPSYNC
C295
100P
R217
(BD-AC) R218
R206
1M
C294
0.047
C357 0.1
(FROM HEAD) 2
3 1 R205
PDE1269 Y X 750K V+5D 11 SUBSYNC
J210 47 4.7K VR202 IC359
10K
CLOK
GNDA TC7SU04F 12 GND
FOK
GFS
DATA
XLAT
FCSCON 10 (BC-AD) PCP1045
V-5A
GNDS V+5D
L2202
R275 5
A15 ADB MCK
4 5 2
VTH1015- 3
ALB 13 DECCK
TRKCON 9
XENCE
XEXSC
3
47K
RAME
RECE
SSCK
ASTB
LRST
1 VCC 16 GNDD
DATA
XWR
14 GND
XRD
1Y UNLOCK
AD2
AD1
AD0
XLT
FG 8 R5022 220 R298
2 YC 15
HD74HC4053FP
V+5A 0Y 10K
3 15 UNLOCK
SLDCON C5004 2200P R5023 2.2K XC 14 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57
R5006
7 1Z 16MHz
10K
AD2
AD1
AD0
ASTB
XRD P90
XWR P91
P92
P93
VSS
XEA/VPP
P07
P06
P05
P04
P03
P02
P01
1C
4 1X 13
IC204
YB R5007 ZC AHB P00 56 XSUBQE 16 X'TAL OFF
AD7
AD6
AD5
AD4
AD3
AD2
AD1
AD0
REF V 6 R5001 R5005 62K 1K
AI5
AI4
AI3
AI2
1 16 5 0X 12 AD3 1 AD3
A3
A2
24K 1Y VCC 0Z WOTO 55 C356
2 15 6 AX 11
HD74HC4053FP
AD4 2 AD4
SPDL 5 0Y YC INH VSS 54 15P
R5030
X352
LRCK 1
12K
3 14 7 BY 10 AD5 3 AD5 CH PSS1010
2
-
8 GNDA 1Z XC VEE 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 1C 53 CDLRCK
LOUT 4
IC5024
YB 4 13 8 CZ 9
VCC
SYD5
SYD4
SYD3
SYD2
SYD1
SYD0
SYA15
SYA14
SYA13
GND
SYA12
SYA3
AD6 4 AD6
X1 52
R1355
1 ZC 1X GND A1 BCLK 2
XCE0 SYA1 24 IC356
1M
C5002 4 5 12 41 AD7 5 AD7 CDBCK
LIN 3 0.15
R5003
3
+ BA4560F 0Z 0X
XCE1 SYA0 23
A0 X2 51
3.6K DATA 3
R5009
MECHANISM
C5019
V+5A 7 10 43 47K A9 7 A9
VEE BY R390 P85/TO11 49 MREQ C355
0.01
R276
P83/TO03 47 CLV CDTX
47K
+ PW1
C5018
47/10
POA1 NC 19
C5013 0.033
GNDA
PW2
46
POA2 VCC 18
R393
47K A12 10 A12 PD4584B P82/TO02 46 ECLV V+5D
47 47K A13 11 A13 6 GND
R5010 YB
GNDA V-5A GND PROTECT 17
R394 GFS 45 GFS
470K 48 12 NC CL 7
8
R5020 PW3
POA3 CRCOK 16 P80/TO00 44 XFUSE GNDD CL
- 0 49 47K A14 13 P56 47K x 4
R5012
6 8 PW4
POA4 SICK 15
R395 1C 43 DI 8
50 47K A15 14 P57 R1389 R1354 DI
470K 4 7 BA4560F SSEL R396 P34/SCK 42 MSCK
ACTERR
YB
C5011 4 C5017 DO
R5015
P21/INTP0
P22/INTP1
P23/INTP2
P24/INTP3
P25/INTP4
0.15 52 16 AVSS
0.01 LJUMP SO 40 MSO
P20/NM1
0
P73/AN3
P74/AN4
P75/AN5
P76/AN6
P77/AN7
V+5A POA7 AIN 12 10 EN CE
P72/AN2
P26/IN5
P27/IN6
100 R1351
CH
47K
YF
53 XOPEN 17 P70 39 XECE
ATIP DECODER
AVREF
C5016 LIN R397 RXD
AVDD
PCL1044- 47/10 POB0 AINPE 11
54 47K FSCE 11
1
2
3
VDD
XCLMP 18 P71
+ LOUT R398 TXD 38 FOK Fs CE
YF
1C
1C
55
C282
100P
IC281
0.047
CN5021 (TP00) KOJK
V-5A PDJ006A DEEM 12
DETECTING
POB2 AOUTPE 9 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
BLACKOUT
GNDA B3P-SHF-1AA 56 R399 DAC DEEM
CIRCUIT
EECS
TEPP
RFT
RFB
MACK
FG
SCOR
ATIP
TOCP
SENS
POB3 GND 8 47K
V+5D 57 D5V
VCC ACK 7 GNDS SENS 13 AMUTE
V+5D 58
R1205 R1203 POB4 ATIP 6 14 LSI RESET
FEOSEL
4.7K R1205 59
39K
SUBSYNC
XRFDT
10K POB5 SPSEL 5 R277
60
XPFAIL
47K J209 (TO AUDIO)
PST529C
POB6 STCN2 MDP 4 R240
SCOR
IC311
61 47K D20PWY1415E
PST529C
C242 GNDD
XAMUTE
POB7 STCN1 SBSY 3
IC311
62 0.01
XLDON
3
TESTB
TEST0
TEST1
TEST2
TEST3
POC0 FSK 2
TEST
C275 - C277 :
DIRC
63 +
GND
XCD
VCC
V+5A PCL1043- DAP202K 2
POC1 WBL 1
64
YF
R1206 C241
D210
R1209
39K V+5D
100K
10/50
TEG0
TEG1
65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
C273
C277 0.33
+ YB C274
C279 0.001
GNDD
0.1
C370
0.1
V+5D
C278 1/50
TEG2
TEGM
75 2SC2412K 47K
V+5A 1 NC
C1310 NC 8 YF
YB
R1207
C276
C275
R1210 IC360
0.33
0.33
EEPROM
C233
0.01
YB
YF
MTZJ3.9B 100K 3 CS DO 6
47/10
R1392
C235
+
RFT
C1306
C272
RFT
M 4 SK 5
B
B
+
173981-5 DI
0.022
C258
R252
33K
YB
+YF
VCC
MIRR
XCD
XRFDET
RFREF
RFDT
CDRMR-
CDRMR2
CDRMRI
CPL
CBL
VEE
HF
RFOPC
XCLMP GNDD
47/10
VDD RFB+ 48
C236
XCLMP 1 1 2.2/50
C234
0.01
C270
330P
UNLOCK
110K
C261 R1360
YB
YB LED0 47K
75
TC7S04F 2 55 4 R1363
330P 27K
YB
3 3
YB
470 YB
R246
R248
WBL3- 42 3 3
0.068
7 PWM3O
47K
C260
GND 5
10K
YB C268
R247 YB
DAN202K
10K C262 C1304
V-5A YB 8 SPDL- PA9004A WBL2O 41
R254
110K
C269 470P
D1351
R1384
9 SPDLO WBL2- 40 330P
100
3300P
GNDD YB IC357 GNDD S201
10 REFV (CDR SERVO AMP.) WBLIO 39
R237 1 XG1(XFUSE) VCC 16 1 XG1(FUCE) VCC 16 DOUT DIGITAL OUT ON/OFF SW
V+5A 11 GND WBLI- 38 C267
1
5.1K PSH1010
330P 2 1A (NC)
2
R1201 XG2 15 2 1A (MSCK) (XSUBQE) XG2 15
R236
12 REFIN BIAS 37
27K
R255 56K
27K C1202
MACK
3
J222 3 1Y (NC) (FSO) 6A 14 3 1Y (FSCK) (MSCK) 6A 14
YF
27K DOUT
C12
0.01
27P
TEDET 36
64
63
62
KEYIN0 61
KEYIN1 60
KEYIN2 59
KEYIN3 58
SCAN0 57
SCAN1 56
SCAN2 55
SCAN3 54
SCAN4 53
VDD 52
WRITE LED 51
REC LED 50
49
GND 48
REMIN 47
MREQ 46
XPFAIL 45
DIGOUT 44
UNLOCK 43
LREQ 42
41
13 CLV DE010NS0
R1358
47K
R1381 SQCK
R1202
IC358
C1305 (To CN203 Pin-2) 4 2A (FSO) (MSI) 6Y 13 4 2A (ENCE) (SQCK) 6Y 13
14 ECLV CTR 35
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
PCL1043-
R351
CH
YF
TRKGR
15 SPDL 34
TRKG1
TRKG2
LI (MSO) 4A 10 100
TE
+
C237
47/10
C238
R354
YB
R1383
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 SEG7 DIP1 (DI) 4Y 9
YF
+
R1388
VCC
100
VA+5 R355
2.2/50
V+5D SG
100
C264
TC74HC367AF
C354
TC74HC367AF
SEG6
IC351 SW1
R241
0.01
YF
SSEL
Heatsink +
FGOUT
VEE
FGIN
PW0
PW1
PW2
PW3
PW4
TEG0
TEG1
TEG2
1M
C263
R356
R243
0.33
SF
3.6K
(FROM R359 SC
R1308
RCH1139-
POWER C1309 SEG2 MODE GNDD V+5D
C280 + C240
10K
SUPPLY) C239 0.0027 R360 SB 47K
R9
MODE CONTROLLER
62
SEG1 VDD
0.01 0.01
YF
470/10
120K x 15
R361
C351
YF YF SA +
VU+5D 1 SEG0
Q14
DTA124EK
VDD
DTC114TK
YB
R1359
R1208 R362 G10
47K
R242 3K
19 STANDBY LED
GNDD JA203
18 DISPLAY LED
GNDD 2
9.1K
R363 G9 C352
GRID9
R15
PKN1005
47K
21 XFUSE
10K R1309
G6 1 GRID6
G5 2 GRID5
G4 3 GRID4
G3 4 GRID3
G2 5 GRID2
G1 6 GRID1
G0 7 GRID0
23 FSLAT
100 13 RREQ
DTC114TS
9 RSCK
12 RACK
R9997 14 FSCK
R365 G7 DEEM
20 GND
10 RSO
8 VDD
0
15 FSO
DEEMP 0
11 RSI
R9998 16 FSI
GNDA 4 GNDA
100 17
22
24
DO
GRI R1307
DI
0
C1308 100P V+5D 47K R376 47K DA
KEY
TEST MODE
R366
R367
R368
R369
R370
R371
R372
CL
CH
R1306 47K
V-5A
GNDD GNDS 120K x 7 R1305
47K LED4 LED3
C5008
C5007
C5006
C5005
R258
R257
R256
CN211
52147-0310
(TO HEADPHONE) C5005 - C5008 : 470P x 4 YB
R1312
L ch 1 D5V
SEG
CR200
R ch 3 M 0.1 Reset 3
GND
R ch
GNDD
-27V
C1302
L ch
2.2/50
G10
KS0
KS1
KS2
KS3
KS4
IC361 2 +
KI0
KI1
KI2
KI3
C1301
PWZ3636-
SG
SC
SD
SH
SR
G0
G1
G2
G3
G4
G5
G6
G7
G8
G9
SA
SB
SE
SK
SF
PST572E
SJ
SI
GNDS 0.1
YF
J212 J3502 CN1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
2 1
3
2
1
1
2
3
4
5
6
7
8
9
CR200
SERVO UCOM (2/2) / AUDIO DIGITAL / HEADPHONE BOARD ASSYS
V+5A
V+12 V+5D R409 R411
C411
330/16 C411 7.5K 15K
C803 R1401 V+5A L401 +
330/16
120P 27 (1/2W) +
VR BOARD ASS'Y RS1/2LMF270J PTL1014-A V+5A
JA801 (1/2)
C431 C433
PKB1029-
CH C413 YB
LFA010K
D803
DAN202K
C813 R823 0.0082 180P 33P
R809 + CH CH
L831
1µ
PWZ3645- PTL1014-A 47/50
GNDA
V+12
6.8K 300 C405
1 DIN LRCKI 28 R401 GA
L329 100P 330 0.01 15 VDA 14 R413 R415 V-12
R821
6 BCKR
47K
C821 8 2 BCKI FSCO 27 LO+ 7.5K 15K
- 16 VDD
YB
YB 13 0.0082 +
7 R402 V+5A R425 C439 C453 C455
3 CKSL BCKO 26 330 BCKL
820P
LO-
C819
17 RST 12 C419 C421 6.8K 47P 220/25
+
220/25
CH 5 + R403
YF
4 CKDV WCKO 25 330 WCKO
YF
GA
R492
18 LZ
10/50 AS
SM5813AP
AS
YB
330/16 R445
4.7/50
4
C831
C832
11
C834
C833
R813 + + R404 WCKO CH
0
+
0.1
DOL 24 330 LDTA
0.1
5 (NC)
PD2028B
VDA 2.4K GAUD GAUD
19 WCKO 10 C423
R825
R801
GNDA
47K
IC803 (1/2) 6 XTI DOR 23 330 R405 RDTA BCKL C425
10K
GNDS GX
CN801 10K 20 BCKO 9 330/16 R433
47/50
0.1
C842
R811 R427 PKB1030-
R493
7 XTO VDD 22 XI 18K C449
21 DLI
R815
YB
VR801 (1/2) 2 V+5A 6.8K
0
10K
B9B-PH-K-S + 8 R483 JA401
YB
R1403 - R819 LDTA 2 - R437 680P CH
GNDA
0.047
C844 8 VSS1 VSS2 21 +
C403
RCV1092-A XO +
4 4 (TO VOLUME) (1/2W) 10K 1 + C404 22 DRI 7 V+5A R429
750 1.6K
R451 PTL1014-A
R807
470/6.3 1
2.7K
1 VRLIN RS1/2LMF270J 9 CKO DG 20 VDX 8
23 M1
3 + 47/50 6.8K - 470
5 5 1 300 6 C427 6 R439 L405
GNDD 10 SYN (NC) 19 R490 3 + R447 +
24 M2
VDA L
INPUT BOARD ASS'Y
YB
C427 IC404 (1/2)
2 GNDA
6 5 R477 7
IC401
6 IC803 (2/2) YF 0 1.2K
100P CH
2 R431 C457
DAP202K
C846 11 (NC) (NC) 18
L/R 14
SMODE 13
CMODE 12
TST2 11
PD 10
IC402
470
YF
YB
GA NJM5532M 220 +
YF
NC 25 RZ
YF
C407 C445
SEL18 9
TST1 8
NC 7
NC 6
AGND 5
VA+ 4
VREFIN 3
AINL- 2
AINL+ 1
4 6.8K 5 4 100/50
AS
AS
Q407
AS
VR802 (1/2) 0.01 +
C807
NJM072DE
10/50
C815
22/50
C817
+
C811
R817
0.0047
0.01
C809
+ OW18 17 R502
22/50
R852
C805
3 VRLOUT
0.068
12 (NC) 0.047
4.7K
J404
0.01
TX
C465
10K
0.1
0.1
NC 26 MCK RO+
D804
2SD114K
C470
RCV1091-A 3 0 3
0.001
DE007NS0
C451
+ 13 (NC) OW20 16 YF C447 R449 IC404 (2/2)
GD RO- R417 C441
4 4 GNDA 14 XRST COB 15 C409 27 2
7.5K GNDS R419 R435 47P YB YB 330 NJM5532M
R406
GA
330/16 28 VDA R463
1K
1 15K 18K CH 0.0056 R453
GNDA
5 GAUD IC801 470
R827
5 V+5A R479 22K
470
J402
DE010NS0
GNDD GNDD C415 1M
YB
AK5340-VS DAC PLATE PNC-383- 0.0082 C435 C437
GAUD
6 GNDA
0.047
C402
YF
YF
17 FSYNC
D802
DAP202K
YF
+ CH CH
AS
YF
16 SDATA
GAUD
28 AINR+
19 DGND
C823
GAUD
0.047
10K
27 AINR-
AS
26 VREF
18 VDP+
24 VDB+
AS
15 SCLK
R851
R818
C816
21 TST3
22 TST4
4.7K
7 VRROUT
22/50
22/50
C808
C806
+ R481
C812
C810
10K
0.01
0.01
0.1
10/50
C818
20 CLK
VR802 (2/2)1 7 C417
23 NC
25 NC
1 + + 2.2K GNDS
NJM072DE 330/16
2 LRST LRCK GNDA V+5A V+5A
8 GNDA
2
8 GNDD R421 R423 R467
YF
3 3 IC804 (1/2) 7.5K 15K 270
REAR PANEL 5 + DACK GNDD C467
9 9 VRRIN C848 R820 J405 DACL
DEEMP
0.01
RS1/2LMF270J
7 + DB015NT0 BCK
VR801 (2/2) R812 NA GNDD Q409
R816
+ C459
R801
R808
R459
2.7K
10K
CN803 6 - 47/50 300 GAUD 2SD2114K
10K
(1/2W)
R1402
YF
YB
YF
V+5A
S9B-PH-K-S +
47/50
C843
10K
C847
C836
820P
R826
C820
L402
AS
R814
0.1
0.1
47K
10/50
V-12
C835
PTL1014-A Q403 D402
R461 R465
+ L832 DTA124ES DA114
47 470
VR801 10K V+12
VR802 4
+ IC804 (2/2) 1µ
(REC BAL.) (REC VOL.) 3 R457
R822
LFA010K R410 R412 Q405
47K
V+5A C412 GAUD
JA801 (2/2)
PKB1029-
DAN202K
- C814 R824 GNDD
2 8 +
R
D801
47/50 300 V+5A C432 C434
R832
V-12 PTL1014-A
100
R810 C414 YB
0.0082 180P 33P L404
C801 CH CH
GNDA
R441 10K
R442 10K
R443 10K
CH 100P 6.8K V+12
C406 D401
GA
CH 0.01 15 VDA 14 R414 R416
DAP202K
GNDS LO+ 7.5K 15K +
C804 YB 16 VDD 13 R426 220/25
V-12
120P V+5D MUTE LO- V+5A C440 + 220/25
V+5D
J3504 17 RST 12 C420 C430 6.8K 47P C454
C456
PG02KA2E10 GA
R1404 MUT WCKO 18 LZ 11 330/16
CH
R446
V+12 L308 + 2.4K GAUD GAUD
PD2028B
VDA
2
27 (1/2) 4.7K
BCKR 19 WCKO 10 C424 GNDA
PTL1014-A C426
RS1/2LMF270J 1 I/O1 VSS 26 R485 GX
20 BCKO 9 330/16 R434
1
YB
8 R438 R484 680P CH
R1324
GNDA 2 - JA402
C323
C322
C383 I/O3 24
R331
3 XWE XO +
+ 22 DRI
5.1K
PDE1284 C1333 7 750 1.6K
GNDD R430 1 PTL1014-A
1K
0.01 4 XRAS XCAS 23 Q401 VDX V+5A 8
23 M1
CH - R452
YF
YB
YB
5 0.0047 7
100P
IC304
0.1
47/10
C318
R478 470
IC403
YB
470
0.01
V-12 NC 25 RZ GA C446 +
4 Q408
4 6.8K 220 5 100/50
V+5D + 0.047
0.0056
V+5D C408 2SD2114K
TX
RO+
C448
NC 26 MCK
100P CH
3
VCC 16
PC3OUT 15
SIGIN 14
PC2OUT 13
R2 12
R1 11
DEOUT 10
0.001
C452
B3B-PH-K-S 0.1 YF C466 R450 R454
VCOIN 9
RO-
MB81C4256A
C410 27 GD 2 R418
R420
C442 0.068 YB 330 22K
C463
CN306 9 A0 A8 18 L319 GA 7.5K GNDS R436 47P YB
330/16 28 VDA 1 15K 18K IC405 (2/2) R464
PTL1014-A
PTL1014-A CH
V+12 10 A1 D-RAM A7 17 GNDA R480
NJM5532M 470
1 IC302 V+5A CH 1M
J403
DE010NS0
TO CN8003
GNDA AUDIO DIGITAL 17.287MHz
11 A2 A6 16 C401
C416
0.0082 C436 C438
L305
2 C474
CD74HC4046AM 12 A3 A5 15 100P 0.1 YB 180P 33P Q412 2SD2114K
(INPUT BOARD ASS'Y)
V-12 BOARD ASS'Y 13 VCC A4 14
CH YF + CH CH
R482
4 VCOOUT
1 PCPOUT
3 GAUD
2 PC1OUT
3 COMPIN
+ DEEMP R424
CH 6 C1A
7 C1B
R422 C460
YF
5 INT
C316
DEEMP
(FROM POWER A BOARD ASS'Y) V+5A V+12 PWZ3641- YF 0.1 Q413
DTA124ES
GNDD 7.5K 15K C468 4.7/50
100/6.3
0.01
C314
B7B-PH-K-S C315 R1483 Q410
NJM7812FA 47P 47/10 GNDD GAUD R460 +
10K 2SD2114K
CN303 IC407 XEVCO C319 + 47K
C445 IN OUT V+5D
VU+12 1 R499 270 L403
100P + R328 100 V-12 Q404 R462 D403 R466
PTL1014-A
C313
XCAS
C472 3300/16
0.1
CH DTA124ES 47 DA114 470
GNDA
XCE
2 C446 + YF L312
C473
R329
PTL1014-A Q406
1K
CH 100P R458
TP7
VU-12 3 3300/16 C317 R330 DACR DTC124ES
GNDA V+5D GAUD
IN OUT C312 1.8K
+
V+5A IC408 1.0TX 680 4700P C342
JA303
4 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 LRST C341 GP1F32T
NJM7912FA L304 10/16 YF 0.1
V-12
ENCERR
ENCPCO
ENCLPFI
ENCLPFO
ENCVCOIN
TP3
TP2
TP1
TP0
DQ3
DQ4
DQ1
DQ2
XWR
XRAS
A9
A0
A1
VSS
VDD
A2
A3
A4
A5
A6
A7
A8
V+5D TP4 81 YB
GNDA XRESET 50 PTL1014-A PTL1020-A
5 V+5D
TP3 82 TP6 49 L330
V+5D
PTL1014-A
R473
GNDD
1
10K
10K
C475
R341
L306
0.01
47/10
2
GNDS
PTL1014-A
100
C310 100/6.3
R323 2 7 4
R342 88 EFM ENCCKOUT 43 1 14 ECKO 5 +
47
4.32M
L317
7 IC308 (2/6)
4
C311 0.1
JA301 C325 + C324 C381 C367
0 0.1 IC308 (1/6) R455
GP1F32R L311 YF 100/6.3 90 VSS VDD 41 100P 0.1
LC89585
YF
+
PTL1014-A + C366
1 91 ENCCK VSS 40 1K
2 R343 ENCK 47/50
3 R300 92 XEXTACK XTALOUT 39 CH YF
EFM ENCODER IC
100 XESC 1K 93 XEXTSYNC XTALIN 38 GAUD
OPTICAL INPUT C376 FROM IC302
GNDD
0.1 ATPS 94 ATIPSYNC OSCILLATOR SECTION ADCSTBY 37 COAXIAL INPUT 8 C1331 R456 C443
9 14
95 SUBSYNC PIN-14 : 12.28MHz - 7 + 47/50
YF SUBS ADCLRCK 36 R319 0.01
18.432MHz 100 IC307 (4/6) PTL1014-A YF PTL1017-A
C339 96 CCB ADCBCK 35 L318 1K
L314 R1328 L321 PKB1027-
B4B-PH-K-S + 47K ECE 97 CE 34 ADCCLK 514 6
1114 10
R318 JA302 3
R474
R345 +
10K
CN305 7 7 +
47/50 100 C362 R470
DIRWDCK
CJSLRCK
JITVCOIN
CL 98 CL 33 ADCDATA
DACDATA
75
DIRLRCK
8 1
CJSDATA
JITLPFO
CJSBCK
DIRERR
DIRBCK
DIRRC1
DIRRC2
DIN
DIRLPF
JITPCO
4.7K R317
JITLPFI
JITERR
1 DI 99 DI 32 DACLRCK LRCK
DIRRS
DIRCK
DRAM
AGND
13 14 12 2 4
AVDD
R347 47
DIRU
- +
DIN3
DIN4
100
VDD
VSS
YB
2 R348 PTL1003 C444
R486 R316 47/50
IC307 (6/6)
CH
CH
V+5D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 100
3 C365 100 DATA
C1401
C1403
DIN1
560P
R472 IC406 (2/2)
0.1
FROM CN3002 47P CH R315
GAUD
10K M5218AFP
4
C369
V+5D
100P
C368
100P
100
Rch
Lch
(INPUT BOARD ASS'Y) V+5D
C306
GNDD 100/6.3 GNDD L316
R1325 47K DIN2 + R1322
TO IC307 PIN-14 47K PTL1014-A
CN401
C307
R311
3
2
1
R305 150
YF
JA304 M 1 14 2 3 14 4 C382 PTL1019-A YB DTA114TS (TO SERVO)
0.1
100
100
100
100
R301 33K
R302 36K
R1333 C478
VOUT
7 7 L320
GND
GND
GND
GND
GND
GND
GND
2 5 4 C469
R312
220 100P
680
VIN
CH
V+5D C344
CH
COAXIAL INPUT
YB 0.01 47 3 3 1 YF 100P 0.1
0.1
SERVO UCOM BOARD
YB
C845 ASS'Y
PTL1014-A R306
R307
R308
R309
1 2 3 4 5 6 7 8 9 10 YF
0.01
R1331 1µ
100
TC7S14F TC74HCU04AF
1000P
R304
5.1K C328
5.1K
C302
C301
C303
R1336
PNB1558- 100/6.3 0.047 R1335 2
100
7
SCREW TERMINAL V+5D X301 270 2 2
C321 16.9344MHz R1450 7
V+5D 100P CH YF 10K IC309 (2/4) 1 1
GNDA V+5D C308 TC74HC00AF D20PWY0330E
C309
V+5D
R349
CH
R310
27P
14
CH
0.047
1K
CO GNDD
5 7
PTL1014-
(J901) Q304
R498
L309
PTL1014-A
330
GNDS DTC114EK
R4323
L310 GNDD 9
8
0
14 PCS1002-A
C347 C348 10 HEADPHONE
+ 7
YF
0.1 YF
C372 0.047
C350 0.047
C371 0.047
AKN-045
C373 0.047
0.1
100/6.3
C349 0.047
YB
YF
YF
YF
L462
0.047
IC309 (3/4)
YF
YB
C346
C345
0
100P
0
4
0
TC74HC00AF 1
R495
11
5
100/6.3
YF
YF
YF
YF
YF
R497
R489
GNDD L463
R496
MCLK2
GNDS GAUD
2
IOSEL
X'TAL OFF
MSEL1
14
7
X'TAL OFF UNLK
GNDS
CH
IC309 (4/4)
YF
DAC DEEM 12 DEEM
XSAM
CDBCK 2 CDBC
ECKO
RECE
ENCK
CDDATA 3 CDDA
Lch INPUT
XRFD
XESC
SUBS
CDLRCK 1 CDLR
CDTX 5 CDTX
UNLK
C1466
C1465
12
13
LSI RESET 14 LRST
ATPS
Fs CE 11 FsCE
TC74HC00AF 1
GND 4 GND
GND 6 GND
CH
CH
YF
YF
AMUTE 13 MUT
EC CE 10 ECE
C1468
C1467
C1463
C1464
3 1
DO 9 DO
MSEL2
FSEL1
FSEL2
DLSEL
DVDD
TEST
FSEL3
MUTE
ADD
2
DI 8 DI
MKSEL 1
R338
UNLK 36
R339
R324 D20PWY0305E
5.1K
33K
100P
0.1
0.01
7
0.01
100P
CN302
100P
MCK1 3 R 34
CN301 52147-1410 IC308 (3/6)
52147-1610 4 BCLKI VIN 33 R1329 GNDS
(FROM SERVO) R337 C335
(FROM SERVO) 100
YB
C336
5.1K
M
0.1
R334
DO4
DO3
DO2
DO1
DO0
FsCE 12 CE 25 DATAO
: Ferrite beads
CL
DI
C390
100 NOTE
4700P 13 14 15 16 17 18 19 20 21 22 23 24
YB
C330
18P
C331 YF
47/10
M Mylar CQMA
CL
CI
GNDD GNDD
1608 type
Without indication 2125 type
STRATEGY BOARD ASSY
3TOUT
EFMIN
GNDD
SEFM
MPLS
3TIN
CN3506
6
5
4
3
2
1
B6P-SHF-1AA
GNDD
TC74HC08AF V+5D
IC331
YF
4 2A 4Y 11
5 2B 3B 10
PWZ3651-
6 2Y 3A 9
7 GND 3Y 8
V+5D
CN3505
CN331
B2B-PH-K-E 1
(TP30)
4
B2P-SHF-1AA 2
XCNT2
VCOIN GNDD IC344
1 1
TC7S08F
VCOCON
2 2
R1323
3K
VR301
RCP1055 V+5D
GNDD
V+5D GNDD V+5D
TC74HC00AF
IC341
TK16124M
1 C3020 EFMOUT 1 1A Vcc 14
5 4
2 3
0.01 2 1B 4B 13 1 Vcc IN 6
CNT2 C3511
YF
3 1Y 4A 12 0.01 C3517 2 GND IC340 GND 5
IC336
TC7SH32F YF
4 2A 4Y 11 0.01 3 OUT CONT 4
GNDD YF
5 2B 3B 10
V+5D
CN3503 R3015 6 2Y 3A 9 C398
S4B-ZR-SM3A IC342 100 7 GND 3Y 8 0.01
C394 TC7SH32F YF
0.01
4
YF 1 C3012
17.28MHz 5 4
DET3T 2 3 0.01
3
V+5D YF
V+3D
EFMIN GNDD
2
GNDD
C395
4.32M TK16124M
TK16124M
GNDD GNDD
1
YF 0.01
1 Vcc IN 6 R3531
1 Vcc IN 6 0
2 GND IC334 GND 5 GNDD
2 GND GND 5 Q3505
V+5D IC333 3 OUT CONT 4
3 OUT CONT 4 DTA124EK
(60nsec)
CN3501 V+5D
B2B-PH-K-Y R3528
R3522
EFMOUT C3521 XCNT1 0 0
1 0.01 (55nsec)
YF TC74HC164AF
C3506 R3556
Q3506 R3523
2 0.01
YF 0 DTA124EK 0
XCNT2
V+3D V+3D
1 A Vcc 14 (40nsec)
GNDD GNDD Q3501 Q3503 R3524
DTA124EK 2 B QH 13
DTA124EK GNDD R3516 C3513 0
(70nsec) 3 QA QG 12 0.01
IC337
V+5D (80nsec) YF XCNT4
R3514 R3513 R3512
V+3D
R3505 R3504 R3503 R3502
1.8K 4 QB QF 11 0
5.1K
Q3504 R3526
2 + C3501 Q3502 7 GND CK 8
Q331 DTA124EK 0
R296
DTA124EK
240
R3527
GNDD PCN1039-
D331 MULTI PULSE TIME SETTING EFM RISE TIME SETTING
R3515
6.2K
UDZ3.0B
15K
C392
C393
47/16
+ GNDD 17.28MHz
0.01 VR3503
D332 YF VR3502 PCP1042
1SS355 VR3501 PCP1042 3T DLY
PCP1043 10K 10K
MPLS DLY 47K EFM DLY NOTE
Capacitor without unit : µF
GNDD GNDD
V+5D CH Ceramic
GNDD CCSQCH
GNDD YF Ceramic CKSQYF
V+5D Electric w/o indication CEAS
XCNT2 1608 type
V+5D
TC74HC123AF
TC74VHC04AF Without indication 2125 type
R3509 CNT2
2.2K
1 1A Vcc 16 1 1A Vcc 14 Resistor unit :
2 1B 1Rx/Cx 15 2 1Y 6A 13 C3515 IC343
CN3502 C3509 TC7S14F
3 2A 6Y 12 0.01
B2B-PH-K-S R3551 R3552
TC74HC138AF 3 1CLR 1Cx 14
YF
0.01 1/16W
YF
IC338
100K 4 2Y 5A 11 4 2
STCN2
100K 4 X1Q 1Q 13 Without indication 1/10W
IC335
1 A Vcc 16
2 5 2Q 2XQ 12
C3507
5 3A 5Y 10
STCN1 2 B XY0 15 6 3Y 4A 9
Metal resistor RN1/10SE
C3519 6 2Cx 2CLR 11
1 3 C XY1 14 XCNT1 CH 82P 7 GND 4Y 8
YF 0.01 7 2Rx/Cx 2B 10
4 G2A XY2 13 XCNT2
8 GND 2A 9 GNDD Others
IC339
GNDD
CR200
GNDD
85
86
CR200
FUNCTION / POWER A & B / POWER SW BOARD ASSYS
Chassis GND
GND
-27V
AC2
AC1
39P F¥F¥C PDD1181- CN701 HLEM-39R-1 (FROM SERVO)
D20PWY0515E
J701
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
5
4
3
2
1
9
8
7
6
5
4
3
2
1
(FROM POWER SUPPLY)
LED3
LED0
LED4
LED1
G10
KS0
KS1
KS2
KS3
KS4
KI0
KI1
KI2
KI3
SG
SC
SD
SH
SR
G0
G1
G2
G3
G4
G5
G6
G7
G8
G9
SA
SB
SE
SK
SF
SJ
SI
GNDS GNDD
R712
R711
R713
R714
R715
V+5D
CAUTION - FOR CONTINUED PROTECTION GNDD
V+5D
470K x 5
G10
GNDD
SG
SC
SD
SH
SA
SB
SE
SK
G9
G8
G7
G6
G5
G4
G3
G2
G1
G0
SF
SJ
VTH1020
SI
NOISE FILTER
OTF1006
LED0
LED4
KS2
KS3
KS4
LED1
CONNECTED BY FASTEN
KS0
KI0
KI1
KI2
KI3
KSI
TYPE CONNECTORS.)
PDF1173-
V+5D V+5D V+5D
V+5D
(YELLOW)
PDF1171-
PDF1172-
NEUTRAL
Q702
(WHITE)
GNDS
R701 R702 R703 1 1
470 470 470 R706
2 2 470
D701 D702 D703 LED1
SEL6210S-TS SEL6210S-TS SEL6210S-TS 3 3 D706
GNDD
2
1
GNDD SEL6210S-TS
CN91 POWER ON LED KS4
WRITE [MANUAL] COPY BIT 4 4
RKC-061
FUSE HOLDER
POWER SW
KS3
LAPPING
FU91
H91, H92 BOARD ASS'Y 5 5 REC INDICATOR LED
TERMINAL AKR1003-A-T GNDD GNDD GNDD KS2 GNDD
FUSE PWZ3393- : CR200USA 6 6
PWZ3394- : CR200EUR KI3
7 7
KI2
C91
FU91 C91
AUTO/MANU WRITE TIME 8 8 PAUSE PLAY REC MUTE
CR200USA REK1075 VCG-044 PSG1006 PSG1006 KI1 PSG1006 PSG1006 PSG1006
PW 1A125V PSG1006
9 9
S701 S702 S703 S708 S709 S710 S717 S718
CN92 KI0
S91 CR200EUR AEK1051 T500mAL250V ACG7020 10 10
B2P3-VH
PSA-009 PSG1006
PSG1006
2
1
11 11
PDE1276-
NEUTRAL
LIVE
GNDS GNDS
IC15 ICP-N10
(FOR SERVO)
YF
PDE1271-
5 HEATSINK (TO HEAD)
ICP-N10
C915 RNE1011
IC11
0.01 PWZ3596- : CR200USA GNDD 1 V+A
IC903
PWZ3597- : CR200EUR
YF
D905 - D908 :
µPC24M05HF 2 GNDA
C902 11ES2
IN OUT
0.01
IC13 3 V-A
L901 ICP-N10
HEATSINK V+U
D906 D908 VTH1020- 4
PNB1207-
5 GNDU
C18
D11 - D14 : 0.01 C29 +
6 V-U
(10000/16)
+
VCH1057
D12 D11 470/10
TX
+ +
PWZ3596- 11ES2
4700P
YF +
C25
C16
C23
C906 C911 C912 0.01
D905 D907 2200/16 1000/16 DCH1057
PWZ3597- 11EQS06 YF
(3300/16)
D14 D13 CN17
B5B-PH-K-S
(TO SERVO)
L902
1 V+U
C17
VTH1020-A-T + +
DCH1057
C28
(3300/16)
C54
0.01
TX
CN12 D54 L23
470/10 47/35
4700P
+ MTZJ20A
C24
2
1
1
2
3
2 GNDD
C26
YF
B2P3-VH J901 VTH1020-
V+U
GNDA
V+5A
1.1K
1.1K
R53
1.1K
R54
R51
R52
10K
100/35
11 C52 CN15
4 +
52147-0510
(TO FRONT)
C13
J1 0.01 -27V
PDE1280- 5 1
R58
YF L21
R56
240
240
NOTE VTH1020- 2 GND
YF
TRANSFORMER 8
Resistor unit : C11 3 AC1
Capacitor without unit : µF
R57
R55
0.01
240
240
VERSION PT1 (SERVO) PT901 (AUDIO) Without indication 1/4W 7 4 AC2
YF Ceramic CKSQYF
PTT1337 PTT1338 5 GNDS
CR200USA TX Audio CENP PTI
multi-layer CFTXA Others
CR200EUR PTT1339 PTT1340 film : Chassis GND
Electric Capacitor without indication CEAS : Ferrite beads
(EARTH METAL PLATE)
GNDS
CR200
WIRED
GNDD
TO CN1
(SERVO PCB)
CN3701
1 2 3
B3B-PH-K-S
PWZ3658-
V+5D
R3709
C3715
R3713
C3719
R3731
4.7K
4.7K
0.01
L3704 C3709
0.01
4.7K
RTF117147/16
+ C3708 Q3708
332 Q3704 GNDD
AS 0.1 DTA114EK
YF R3726 DTA114EK
R3730
47K 47K
R3722
GNDD
1.2K
YF YF
DA114
D3704
DA114
D3708
B
R3712
B
R3708
C3714
C3718
R3717
4.7K
4.7K
V+5D
0.01
V+5D
0.01
47
GNDD GNDD
R3729 R3725
47K 47K
R3716
R3721
YF
1.8K
YF Q3707
560
Q3703
DTA114EK DTA114EK
DA114
D3703
DA114
D3707
B B
R3707
C3713
R3711
C3717
4.7K
V+5D V+5D
4.7K
0.01
0.01
GNDD GNDD
R3728 R3724
47K 47K
R3715
R3720
YF Q3706 YF Q3702
820
3K
DTA114EK DTA114EK
DA114
DA114
D3706
D3702
C3712
R3706
B B
R3710
C3716
0.01
4.7K
V+5D
4.7K
V+5D
0.01
CN3702
RKN1030
C3720
GNDD GNDD
9 9 R3727 R3723
0.1
47K 47K
R3719
R3714
6 7 6 7 YF
5.1K
8 Q3705 YF Q3701
1K
YF
1 3 8 1 3 DTA114EK DTA114EK
DA114
D3701
DA114
D3705
5 4 B B
2
4 5 V+5D V+5D
2
GNDD GNDD
GNDS
NOTE
CH Ceramic CCSQCH
YF Ceramic CKSQYF
NP Electric CENP
Electric Capacitor without indication CEAS
1608 type
Without indication 2125 type
Resistor unit : Others
87
CR200
L8005 4 C8011
3.9K
8 V-12
R8001
2
1%
22/50
470K
R8011
3 V-12
100K
2 1 1 1
IC8003 (1/2) + 3 CN8005
332 6
3 3 4 V+12 B9B-PH-K-S
R8009 R8007
2.7K
5.6K
9 VRR IN
R8013
2
100K
-
R8003
C8007 1%
R8015
470K
L8003
5.6K
1
3.9K
V-12 8 GNDA
1%
C8009
R8019
47/50
C8005 +
47/50
L8001 3
RTF1167 NP 6
7
+ IC8001 (1/2) +
33K 7 VRROUT
RTF1167 22/50 RY8001 (3/3) 5 M5238AP
1%
GS
6 GNDA
Lch (CH1) GAUD
5 GAUD
L8002 C8006 RY8002 (2/3)5 IC8002 (1/2)
1% C8008
C8010
R8020
47/50
47/50
7 GAUD GAUD
+ 4 GNDA
NP + M5238AP
R8008 R8010
L8006 6
3.9K
RTF1167 3 +
R8016
R8004
22/50
1%
470K
RTF1171 33K
5.6K
3 VRLOUT
R8014
100K
332 1% 1
4 2 - V+12
TY 2 GNDA
C8002
0.047
2.7K
R8024
1%
RY8004 (2/2)
100K
5
R8002
+
470K
1% IC8004 (2/2) 1
R8006
3
3.9K
3 7
1%
RGND
1
8
C
C
PSH1012
RY8002 (1/3) 8 (+)
1
7
2
VSR1006 7 VRROUT
D8004
3
DAN202K 6 RGND
GAUD
D8002
9
5 GAUD
4
DAN202K
10
LGND
5
4
C
C
V-12
3 VRLOUT
2 LGND
AES/EBU IN
1 PIN LIN
3
C3002 C3003
1 CN8004
47P 47P IC8004 (1/2)
B9B-PH-K-R FROM CN801
2
CH
CH
(AUDIO PCB)
120
R3002
5 IC3001 4
CH
330
3 R3003 6 3
SN75157P
7 2
R3001
330 C3006
1 2
330P 8 1
4 Electric Capacitor
CN3001 V+5D
PKP1011 R3004 C8007, C8008
L3001 1K PCH1124
C8009, C8010
+
YX
RTF1163 C3005
GNDS 0.01
C3004
47/16
GNDD
V+5D
GNDD
DIN
1 2 3 4
CN3002
B4B-PH-K-S TO CN305
(AUDIO PCB)
88
CR200
8. TROUBLESHOOTING
8-1. Service Number Display
• The CR200 displays the “CHECK” or “CHECK” “DISC?” prompts during abnormal operations and it stops.
• When the STOP or CLEAR key on the remote control unit Model 8317 is pressed continuously for about 10 seconds, the
last service number will be displayed even though the CR200 is once turned off and back on.
• To correct the error, check the “Checkpoint” device and its surrounding circuit indicated in the table below.
89
CR200
90
CR200
2. Signal skipping or interruption occurs when the disc is recorded and then played back on the same CD-R unit.
• The recording power is too low.
• The pickup is faulty.
• Some of the section on the disc where dusts were attached could not be properly recorded.
91
FOSTEX CORPORATION 3-2-35 Musashino, Akishima, Tokyo, Japan 196-0021
FOSTEX CORPORATION OF AMERICA 15431 Blackburn Ave., Norwalk, CA 90650, U.S.A.