Sunteți pe pagina 1din 3

INDUS UNIVERSITY

Indus Institute of Technology & Engineering


DEPARTMENT OF CIVIL ENGINEERING

Teaching Scheme:

Design of RC
CV410511
Structures
Examination Scheme:

Design of RC
CV410511
Structures

Mid Sem Exam If a student fails to score 16 in Now he/she has to give Also note that the In order to
will be taken on the CIE component Remedial Exam (Out of Remedial Exam has a Cap clear the
date mentioned in (MSE+Internal Evaluation), a 40). If students fails to of 16. Even if student subject as a
the academic Remedial Exam (out of 40 score 16 out of 40 in the scores more than 16 out of whole, a
calendar. marks) has to be given by the Remedial Exam, he/she 40 in remedial exam, student is
Duration is One student and has to score 16 has to appear for Remedial he/she will be awarded required to
Hour & 15 marks out of 40 to clear the Exam (out of 40) in the marks NOT more than 16. clear both (CIE
minutes CIE Component. Next Sem. He / She can appear for as well as
Internal The moment, student fails in Again Note that students External component, but External
Evaluation marks CIE component, his/her who have cleared the Mid- again has to score 24 out of component).
will be declared Internal Evaluation marks Sem exam cannot appear 60 to clear.
prior to three become null and void. for Remedial Exam. If not - Next Sem.
weeks to term
end.

Introduction to Reinforced Cement Concrete (RCC): Properties of Concrete and


Reinforcing Steel, Introduction to Working stress and Limit state methods, Characteristic
and Design Value and Partial Safety Factors, Loads and Load Factors, Load
Combinations.
Design Philosophies for Reinforced Cement Concrete (RCC): Limit State of Flexure,
Design of Singly Reinforced Beams, Design of Doubly Doubly Reinforced Beams,
Concept of Flanged Beam or T-Beam.
Limit State of Shear: Nominal Shear Stress, Design Shear Strength of Concrete,
Minimum Shear Reinforcement, Design of Shear Reinforcement, Design of Beams for
Shear.
Limit State of Torsion: Reinforcement in members subjected to Torsion, Design of
Beams for torsion. Bond, Development Length, Limit State of Serviceability: Deflections
and Crack Width.

All topics above will be for mid-semester examinations


For details of Mid-semester examinations, kindly refer the University Academic Calender

Solid Slabs: Introduction to Yield Line Theory and simple problems, One-way Slab,
Simply Supported One-way Slab, Design of One Way Slab, Two Way Slabs, Simply
Supported Two-Way Slab, Design of Two-Way Slab Reinforcement detailing for One way
and Two Way Slabs.
Design of Staircases: Classification of Stairs, Terms Used, Design Requirement d for
Stair, Design of Transversely and Longitudinally Supported Staircase.
Load Calculation: Loads on Slabs, Loading on Beams from One-way and Two-way Slab,
Wall Loads and Self-weight of Beams, Unit Loads

Limit State of Compression: Minimum eccentricity, Effective Length of Compression


Members, Slender Limits for Columns, Design of Short axially loaded columns in
compression, Members subjected to combined Axial load and Uniaxial bending, Members
subjected to combined Axial Load and Biaxial bending, Design of Slender compression
members.

TOTAL SUBJECT HOURS


Note: 20% of above curriculum can be given as self study to students.

IS Codes:
1. Bureau of Indian Standards, IS 456:2000 Plain and Reinforced Concrete Code of Practice, 2000.
2. Bureau of Indian Standards IS 13920:1993 Ductile Detailing of Reinforced Concrete Structures Subjected
to Seismic forces Code of Practice, 2003.
3. Bureau of Indian Standards, SP 16: 1988 Design Aids for Reinforced Concrete to Is 456, 1980.
4. Bureau of Indian Standards, SP 34: 1987 Handbook of Concrete Reinforcement and Detailing, 1987.
References Books:
1. Dr. H. J. SHAH, -
House Pvt. Ltd., 10th Edition.
2.
3. S. U. Pillai and D. Menon, Reinforced Concrete Design, Tata Mcgraw-Hill 3rd Edition, 2009.
4. M.L. Gambhir, Fundamentals of Reinforced Concrete Design, Prentice Hall India, 2006.
5. Volume-
Publication.
6. Use of Design Aids (Sp16) Use of Sp34.

S-ar putea să vă placă și