Documente Academic
Documente Profesional
Documente Cultură
Benefits
− Simplifies BAS programming
− Reduces programming time
− Minimizes programming errors
− Facilitates troubleshooting
− Intuitive programming (small learning curve)
− Efficient, energy saving potential
Features
Supported Platforms
− LNS® Turbo 3.20 and greater
− NiagaraAX Framework®
Supported Controllers
− ECP-203, 300, 400, 500 Series
− ECP-VAV, ECP-VAVS, ECP-PTU Series
Block Objects
Comparators
Internal
Constant
Custom
Custom Conditional
Block Custom
Block
HVAC
Optimum
Start/Stop
Logic
Switch Multiplexer
SNVT Conversions
SNVT_switch SNVT_switch
Demux Mux
Time
Timer
Tools
1. Programming Sheet: This area is the main section of the 6. Properties Pane: This pane is used to define the properties
user interface and is where device programming is done. of each block object, drawing documents, projects, etc. in the
“Drag and drop” block objects from the Toolbox then connect Programming Sheet. The properties are then dynamically
them together with a “click, select and release” to build a adjusted according to the block object(s) selected.
control sequence.
7. Output Pane: This pane displays information and progress of
2. Main Menu Bar & Toolbars: EC-gfxProgram comes with a the build.
Windows-based Main Menu Bar and Toolbars (Standard,
8. Error List Pane: This list indicates errors when compiling the
View, Compile & Debug and Layout) that allow easy access
to commonly-used functions. control sequence to the controller. This assists the user to
troubleshoot and debug problems.
3. Toolbox Pane: This library contains the block objects that
can be “dragged and dropped” into the Programming Sheet 9. Statistics Pane: After a control sequence is compiled, this
to build a control sequence. The block objects are organized pane displays certain statistics such as memory usage,
into 12 categories. resource usage, compiling time, etc.
4. Code Library: This library contains saved code drawings 10. Resources Viewer Pane: This pane displays information
(snippets) and projects that can be “dragged and dropped” about all Hardware IOs, Wireless Inputs, Smart Sensor
into the Programming Sheet. Outputs, Network Variables, Constants and Variables, such as
name, value, mode.
5. Project Explorer Pane: This tree-view list allows for easy
navigation throughout the block objects and drawing
documents of a project.