Documente Academic
Documente Profesional
Documente Cultură
© ABB Group
20 October 2017 | Slide 1
List of Content
© ABB Group
20 October 2017 | Slide 2
Objectives
On completion of this module you will be able to:
© ABB Group
20 October 2017 | Slide 3
Secure Knowledge, Learner activities
Objective:
System Configuration
Reference Documentation:
MicroSCADA Manual
© ABB Group
20 October 2017 | Slide 4
MicroSCADA Configuration Overview
Links (LIN)
A link is a data transmission line to the base system.
Link of type LAN: The process communication unit may be
directly connected through LAN link.
Link of type INTEGRATED: For each configured PC-NET.
This link type is used only by PC-NET
Several nodes can be connected to the same link and use the same LIN
object.
Station (SA)
Each Node has a station address which is unique in the entire sys600
system.
© ABB Group
20 October 2017 | Slide 5
MicroSCADA Configuration Overview (BL8)
Node, Link, Line and STA
Base System 1
SA 9
SNMP Appl 1
SA 19 STA 101..199 (Nod 11)
STA 201..299 (Nod 12)
STA 991, 992, 993 (Nod 51, 52, 53)
STA901..989, >1000 STA 900…989, >1000.. (Nod 19)
Nod 19
Nod 9
LIN 1 (LAN)
SA = Station
Nod = Node
LIN = Link
© ABB Group Li = Line
20 October 2017 | Slide 6
MicroSCADA Configuration Overview (<BL7)
Node, Link, Line and STA
Base System 1
SA 209
SNMP Appl 1
SA 115 STA 101..199 (Nod 11)
STA 201..299 (Nod 12)
STA 991, 992, 993 (Nod 19, 18, 17)
STA901..989, >1000 STA 900…989, >1000.. (Nod 15)
Nod 15
Nod 9
LIN 1 (LAN)
SA = Station
Nod = Node
LIN = Link
© ABB Group Li = Line
20 October 2017 | Slide 7
MicroSCADA Configuration Overview
Application Configuration Overview
© ABB Group
20 October 2017 | Slide 8
MicroSCADA Configuration Overview
Base System Configuration
© ABB Group
20 October 2017 | Slide 9
MicroSCADA Watchdog
Hot-Standby (on startup)
SAS 1 SAS 2
© ABB Group
20 October 2017 | Slide 10
MicroSCADA Watchdog
Hot-Standby (control by Operator)
SAS 1 SAS 2
© ABB Group
20 October 2017 | Slide 11
MicroSCADA Watchdog
© ABB Group
20 October 2017 | Slide 12
MicroSCADA Watchdog
The following three attributes are reported only when the connection to the
external base system has been established:
© ABB Group
20 October 2017 | Slide 13