Documente Academic
Documente Profesional
Documente Cultură
Important!
Risk of damage!
To open the central bolt at the camshaft, grip hexagon on rear of camshaft.
Installation Note:
Install fastener (1) with bore facing outwards.
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/5/nonstandard/451282/selfRefLink/false 1/4
7/15/2019 11 31 505 Adjusting Camshaft Timing (Camshaft) - ALLDATA Repair
Important!
On engines with automatic transmissions, there is shortly before the special tool bore for the TDC position a large bore which can be confused with the
special tool bore.
If the flywheel is secured in the correct bore with special tool 11 0 300, the engine can no longer be moved at the central bolt.
Important!
If special tool 11 4 281 cannot be installed, the camshaft must be rotated at the hexagon head at the rear.
With cylinder No. 1 in ignition TDC position, cams of exhaust camshaft (2) and intake camshaft (1) at 6th cylinder point downwards at an angle.
Note:
If the timing is adjusted while the engine is installed, the position of the camshaft can only be checked with a mirror.
Installation Note:
Replace screw (1).
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/5/nonstandard/451282/selfRefLink/false 2/4
7/15/2019 11 31 505 Adjusting Camshaft Timing (Camshaft) - ALLDATA Repair
Installation Note:
Replace screw (2).
Rotate increment wheels until retaining pins on special tool 11 8 520 match up.
Note:
Bolts M6 x 45 (1 and 2) with captive washer.
Assemble engine.
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/5/nonstandard/451282/selfRefLink/false 3/4
7/15/2019 11 31 505 Adjusting Camshaft Timing (Camshaft) - ALLDATA Repair
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/5/nonstandard/451282/selfRefLink/false 4/4