Documente Academic
Documente Profesional
Documente Cultură
Introduction
The INLine™ Liner Hanger System has been
designed to improve upon current offering in the in-
dustry for 11-3/4" x 13-3/8" drilling liners by improv-
ing Packing Element differential capability,
hanging capacity and liner hanger integrity. The
INLine Liner Hanger System incorporates a ZXP™
Liner Top Packer, an improved Hydraulic Set Liner
Hanger and an RS Packoff in one chassis.
Features and Benefits
• Eliminates the hydraulic cylinder - improves
pressure integrity
• Solid body design with integral setting piston
and slip seats.
• Incorporates hanger, packer and retrievable
cementing profile into a single common tool
• Utilizes rupture disc technology to control
setting pressure within +/-5% tolerance
• Eliminates welding on hanger body making
design applicable to CRA applications
• Higher load capacity
• Higher burst and collapse
NOTE: Shear forces and pressures recommended in this Tech Unit are theoretical values only, calculated from nominal shear screw values and nominal piston areas.
Observed shear values in the well may vary due to tolerance in shear strength of screws, internal tool friction, mud lubricity, cuttings or other solids in the mud and a
number of other variables. Tools which shear "out of range" do not necessarily indicate a tool malfunction.
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document
is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to
know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in
conjunction with equipment or product. © 9/18/03 Baker Hughes Incorporated.
Unit No. 4958 10-1-03 INLine™ Liner Hanger System
Rev. New Page 2 of 3
WARNING
Use of Baker equipment contrary to
manufacturer’s specification may result in
property damage, serious injury or fatality.
Specifications
INLine™ Liner Hanger Specs
Casing Burst Collapse Run-in
Liner RH Profile
Liner Casing Weight Hanging Setting Rating Rating Tensile
Weight Compression
Size Size Range Capacity Pressure (Q-125) (Q-125) Capacity
Range Rating (lb)
(lb/ft) PSI PSI (lb)
11-3/4"- 11-7/8" 60-65 & 71.8# 13-3/8" - 13-5/8" 68-72 & 88.2 1,000,000# 1500 psi * 6739 5000 864,000 430,000 l
* Note: 2000 PSI and 2500 PSI setting pressures can be provided on request.
l Based upon 125Ksi MYS Body.
Bypass Area
13-3/8" Set (in.2) Unset (in.2)
68#/ft 5.076 5.494
72#/ft 4.248 4.172
88.2#/ft 4.79 4.714
Other Specifications
Max OD Body ID Packoff Rating Temperature Rating
(in.) (in.) (PSI) (oF)
12.13 10.686 5000 250
Dimensional Data
Refer to Drawing No. 399-332.
A B C D E F G H I
216.25 12.13 11.5 10.686 12.13 12.095 12.13 12.085 12.13
Rev. New
Unit No. 4958
Page 3 of 3
10-1-03