Documente Academic
Documente Profesional
Documente Cultură
Pontoon
Heavy Duty Concrete Pontoon
MOORING BOLLARD
- T-bollard mooring; PILE MOORING SYSTEM
- The geometrical construction of the bollard ensures the - An alternative solution for chain
better distribution of the internal forces. mooring;
- Has been designed for piles
Ø400-500 mm;
- The design pile load is 40 kN;
SERVICE DUCTS AND CABLE TRAY - Large and robust construction;
- Inside concrete, not visible; - Flexible rubber joints
- Can be installed on both sides or in the
middle;
- Duct diameter 110 mm or 160 mm.
BOAT BOOMS
- Boat Booms with
rubber or hinge
connection;
- With or without
timber decking.
L
L
W
W
www.topmarine.eu www.topmarine.eu
L
Heavy Duty Concrete Pontoon
HD Pontoon High-stability, strong, maintenance free, for year-round use, long service life
As landing stages, against breakwaters, for floating houses and for other on
Intended use
sea structures
Wood or plastic decking, fenders, finger connection rails, mooring fingers, boat
Accessories
booms, mooring bollards, service ducts, safety equipment
Item code 04 10 00 04 12 00 04 20 00 04 22 00 04 30 00 04 32 00
Dimensions Width with fenders 2.54 3.30 2.54 3.30 2.54 3.30
(m) L 9.00 9.00 12.00 12.00 15.00 15.00
H 1.07 1.07 1.07 1.07 1.07 1.07
Designed load capacities (kN/m²) 5.2 5.5 5.6 5.9 5.8 6.1
Chain Ø20 mm
Mooring
Concrete anchors 2000 kg
systems
Pile Ø400...600 mm, 40 kN
Boat mooring Mooring buoys, Boat Booms, Mooring fingers, Mooring bollards
Top Marine is a continuously developing firm and may at its sole discretion revise or amend this product catalogue
without further notice.
Representative: