Documente Academic
Documente Profesional
Documente Cultură
REFERENCES
1383
Technological Institute of the Philippines
F.G. Kerry. (2006). Eq. 7.19 of Industrial Gas Handbook: Gas Separation and
Purification.
Miller JW, Schorr GR Jr, Yaws CL. (1976). Chem Eng 83(23):129, Physical
and Critical Properties
Toyo Engg Brochure. Process Performance of Utilities.
Heat Capacities of Inorganic and Organic Liquids, Perry’s Chemical
Engineers’ Handbook, 8th Edition
Mavrovic, Kirk-0thmer. Encyclopedia of Chemical Technology, 3rd edition.
American Society of Mechanical Engineers (ASME)
Levenspiel, O., (1999). Chemical Reaction Engineering New York: John Wiley
and Sons, Inc.
F.G. Kerry. (2006). Industrial Gas Handbook: Gas Separation and Purification.
F.G. Kerry.
Sinnot, R.K. (2005). Coulson & Richardson’s Chemical Engineering Volume 6,4th
Edition, India: Elsivier. Pp 64
1384
Technological Institute of the Philippines
Table 8.1 Pg. 289 from Heat Exchanger Selection, Rating and Thermal
Design(2002).Kakac-Liu.Washington DC
Eqn.12.3b. Pg.648 from R.K. Sinnott, Chemical Engineering Design Vol. 6 (2005).
Elsevier-Butterworth-Heinemann. Oxford
Eqn.12.17. Pg.677 from R.K. Sinnott, Chemical Engineering Design Vol. 6 (2005).
Elsevier-Butterworth-Heinemann. Oxford
Eqn.12.15. Pg.664 from R.K. Sinnott, Chemical Engineering Design Vol. 6 (2005).
Elsevier-Butterworth-Heinemann. Oxford
Pg.652 from R.K. Sinnott, Chemical Engineering Design Vol. 6 (2005). Elsevier-
Butterworth-Heinemann. Oxford
1385
Technological Institute of the Philippines
Eqn.12.21. Pg.672 from R.K. Sinnott, Chemical Engineering Design Vol. 6 (2005).
Elsevier-Butterworth-Heinemann. Oxford
Eqn.12.23. Pg.672 from R.K. Sinnott, Chemical Engineering Design Vol. 6 (2005).
Elsevier-Butterworth-Heinemann. Oxford
Eqn.12.11. Pg.663 from R.K. Sinnott, Chemical Engineering Design Vol. 6 (2005).
Elsevier-Butterworth-Heinemann. Oxford
Eqn.12.2. Pg.635 from R.K. Sinnott, Chemical Engineering Design Vol. 6 (2005).
Elsevier-Butterworth-Heinemann. Oxford
Equation 10.10 Pg. 461 from R.K. Sinnott, Chemical Engineering Design
Vol.6 (2005). Elsevier-Butterworth-Heinemann. Oxford
Walas, S. M. (1990). Chemical Process Equipment Selection and Design.
USA: Butterworth-Heinemann
Al-Nahrain University, College of Engineering Journal (NUCEJ) Vol.18 No.1,
2015 pp.111-117
M. S. Peters & K. D. Timmerhaus (1991). Plant Design and Economics for
Chemical Engineers. McGraw-Hill Inc. Singapore.
1386
Technological Institute of the Philippines
Eqn. 14-141. Page 14-58. Perry, R. & Green D. (2008). Perry’s Chemical
Engineer’s Handbook (8th ed.).
Eqn. 14-140. Page 14-57. Perry, R. & Green D. (2008). Perry’s Chemical
Engineer’s Handbook (8th ed.).
Eqn. 13.39. Page 815. Sinnot, R. K. (2005). Coulson & Richardson’s
CHEMICAL ENGINEERING DESIGN (4th ed.).
Table 13.3. Page 813. Sinnot, R. K. (2005). Coulson & Richardson’s
CHEMICAL ENGINEERING DESIGN (4th ed.).
Table 13.2. Page 812. Sinnot, R. K. (2005). Coulson & Richardson’s
CHEMICAL ENGINEERING DESIGN (4th ed.).
Page 813. Sinnot, R. K. (2005). Coulson & Richardson’s CHEMICAL
ENGINEERING DESIGN (4th ed.).
1387
Technological Institute of the Philippines
Yoshida, K., Yoshimoto, K., Kojima, Y., & Sakura, S. (October, 2001) Process
for the Synthesis of Urea. Japan
1388