Documente Academic
Documente Profesional
Documente Cultură
3408 C
2000 rpm
Mobile Equipment
CATERPILLAR ENGINE
SPECIFICATIONS
V8, 4-Stroke-Cycle Diesel
Bore......................................................... 137.2 mm (5.4 in)
Stroke...................................................... 152.4 mm (6.0 in)
Displacement..................................... 18.02 L (1,099.65 in3)
Aspiration................................. Turbocharged / Aftercooled
Compression Ratio.................................................... 14.5:1
Rotation (from flywheel end).................... Counterclockwise
Capacity for Liquids
Cooling System.........................................75.0 L (19.8 gal)
Lube Oil System (refill).............................. 46.0 L (12.2 gal)
Engine Weight, Net Dry (approx.).......... 1,642 kg (3,620 lb)
FEATURES
Emissions Full Range of Attachments
Non-certified rating. Meets emission levels for Tier 1 / Wide range of bolt-on system expansion attachments,
Stage I standards. factory designed and tested.
PERFORMANCE CURVES
IND - B - DM0380-01
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
2000 366 1748 223.8 97.7
1900 358 1801 219.2 93.7
1800 349 1853 216.6 90.2
1700 338 1900 215.9 87.1
1600 326 1948 216.4 84.0
1500 312 1987 217.9 80.9
1400 294 2008 220.8 77.3
1300 272 1997 225.5 73.1
PERFORMANCE CURVES
IND - B - DM0380-01
Engine English
Torque lb•ft
Engine
Power bhp
BSFC
lb/bhp-hr
Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr Fuel Rate
rpm bhp lb•ft gal/hr
2000 491 1289 .368 25.8
1900 480 1328 .360 24.8
1800 468 1367 .356 23.8
1700 454 1401 .355 23.0
1600 438 1437 .356 22.2
1500 419 1466 .358 21.4
1400 395 1481 .363 20.4
1300 364 1473 .371 19.3
IND - B For service where power and/or speed are Engine Performance Engine performance is corrected
cyclic. Time at full load is not to exceed 80% of the duty to inlet air standard conditions of 99 kPa (29.31 in. of
cycle. Typical service examples are: irrigation where Hg) dry barometer and 250 C (770 F) temperature.
normal pump demand is 85% of engine power, oil field These values correspond to the standard atmospheric
mechanical pumping/drilling, stationary plant air pressure and temperature as shown in SAE J1995.
compressors.
Performance measured using a standard fuel with fuel
gravity of 350 API having a lower heating value of
42,780 kJ/kg (18,390 BTU/lb) when used at 290 C
(84.20 F) where density is 838.9 g/L (7.001 lb/U.S. gal).
Engine Dimensions
(1) Length 1582.1 mm (62.29 in) Note: Do not use for installation design. See
general dimension drawings for detail
(2) Width 1108.4 mm (43.64 in) (Drawing # 7W5894 ).
(3) Height 1364.5 mm (53.72 in)