Documente Academic
Documente Profesional
Documente Cultură
NDT Firm
Logo Ultrasonic Testing Date of Testing
Examination Specification Acceptance Standard Class Procedure Rev. : NDT Procedure No.
Technical Data
Equipment : A, B, C Scan Model : Sr. No.: Calibration Block & Setting
Type of Sr. No. Frequency Size Range Type of Block Reflector Size Sensitivity Set Surface
Probes & Location Condition
Normal V1/V2/DAC/ Gain Couplant :
Angle V1/V2/DAC/ Gain Transfer loss
Other V1/V2/DAC/ Gain correction :
Interpretation Data
Weld UT Length UT ID UT Echo Beam Skip Discontinuity Acceptance /
Length Type Height Path Dist- Type & Size Rejection
(1) (2) ance (3)
1. Total Weld Length out which this Ultrasonic testing is carried out, 2. New/Repair/#R 3. Accept/ Repair
Sketch if Required