Documente Academic
Documente Profesional
Documente Cultură
290LC-7A
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.
All imperial measurements rounded off to the nearest pound or inch.
PLEASE CONTACT
Visibility
. Even more visibility than before, for safer, more efficient operating.
Excellent Ventilation
. Ventilation has been improved by the addition of the larger fresh
air intake system, and by providing additional air flow throughout
the cab.
. Sliding front and side windows provide improved ventilation.
. A large sunroof offers upward visibility and additional ventilation.
ᵋ Storage box and Cup Holder Highly Sensitive Joystick Easy-to-Reach Control Rear Emergency Exit Raise-up Wiper and Cabin
An Additional storage box and cup holder are located and Easy Entrance Panels Window Lights
behind operator’s seat, and it keeps food and New joystick grips for precise Switches and other essential Rear Exit Window is designed Raise-up wiper has enhanced for
beverages cool or hot. control have been equipped with controls are located near the with easy exit for operator's the better front view. Cabin Lights
4 switches. operator. safety. enhances safety by brightly
ᵾ Wide Cab with Excellent Visibility Power boost This helps keep operator move- lighting the surroundings during
The cab is roomy and ergonomically designed with low noise level Left One touch deceleration ment to a minimum, enhancing night work(optional)
and good visibility. A full view front window and large rear and side Dummy control with less operator
windows provide excellent visibility in all directions. Right Horn/Optional/Dummy fatigue.
AB
C
Reinforced pillars have also been added for
♳Option button
greater cab rigidity.
♴Remote Radio control
CAB
♹Travel pedal
♺Fully adjustable suspension seat
♻Safety lever
♼Power boost button
♽Joystick control lever
♾Air Conditioner and Heater controller
Full open doors and master key system Durability of structure proven through
FEM(Finite Element Method) analysis
provide easy access for servicing. and long term durability test.
Side Cover with Left & Right Swing Open Type Easy to maintain engine components
Easy access to vital components gives unrestricted view of The cooling and preheating system are provided for optimum and
component allows easy maintenance and repair. immediate operation, guaranteeing longer life for the engine and
hydraulic components.
Servicing of the engine and hydraulics is considerably simplified
due to total accessibility.
Centralized Electric Control Box and Highly efficient Hydraulic Pump Large tool box for extra storage
Easy Change Air Cleaner Assembly Pump output capacity has been increased.
Electric control box and Air cleaner are
centralized in one or the same
compartment for easy service.
Two speed axial piston motor assembled trak chain with triple grouser shoes. ⎁1.49 (1.95) 1.28 (1.67) 1620 (63.8) - 1440(3170) ᵄ ᵉ ᵋ M
Travel
with brake valve and parking brake
Center frame X - leg type ᵀ: Standard backhoe bucket ᵄ: Applicable for materials with density of 2,000 kg / m (3,370 lb/ yd ) or less
3 3
Swing Axial piston motor with automatic brake ᶉ: Heavy-duty ᵉ: Applicable for materials with density of 1,600 kg / m3 (2,700 lb/ yd3) or less
Track frame Pentagonal box type ⎁: Rock-Heavy duty bucket ᵋ: Applicable for materials with density of 1,100 kg / m3 (1,850 lb/ yd3) or less
Relief valve setting
Implement circuits 330 kgf/cm2 (4690 psi) No. of shoes on each side 48
No. of carrier roller on each side 2
Travel 330 kgf/cm2 (4690 psi) Arms
Power boost (boom, arm, bucket) 360 kgf/cm2 (5120 psi) No. of track roller on each side 9
Swing circuit 265 kgf/cm2 (3770 psi) No. of rail guides on each side 2 Boom and arms are of all-welded, low-stress, full-box section design. 6.25m(20’ 6”) boom and 2.10m(6’ 11”), 2.50m(8’ 2”), 3.05m(10’ 0”),
Pilot circuit 35 kgf/cm2 (498 psi) 3.75m(12’ 4”) arms are available. Buckets are all-welded, high-strength steel implements.
Service valve Installed
Hydraulic cylinders Operating weight (approximate)
Boom: 2-140ᴧ1465 mm (5.5”ᴧ57.7”)
No. of cylinder- Operating weight, including 6.25 m (20’ 6”) boom, 3.05 m (10’ 0”) arm,
bore x stroke Arm: 1-150ᴧ1765 mm (5.9”ᴧ69.5”)
SAE heaped 1.27 m3 (1.66 yd3) backhoe bucket, lubricant, coolant, full
Bucket: 1-140ᴧ1185 mm (5.5”ᴧ46.7”)
fuel tank, hydraulic tank and the standard equipment.
D, D' E
F
C
G
A K
H
B
L
I
mm (ftᴌin) mm (ftᴌin)
mm (ftᴌin)
R290LC-7A 4030 (13’ 3”) Boom length ᵀ6250 (20’ 6”)
A Tumbler distance Boom length ᵀ6250 (20’ 6”)
R290NLC-7A 4030 (13’ 3”) 2100 2500 ᵀ3050 3750 mm (ftᴌin)
Arm length 2100 2500 ᵀ3050 3750
B Overall length of crawler 4940 (16’ 2”) (6’ 11”) (8’ 2”) (10’ 0”) (12’ 4”) A Tumbler distance 4030 (13’ 3”) Arm length (6’ 11”) (8’ 2”) (10’ 0”) (12’ 4”)
C Ground clearance of counterweight 1190 (3’ 11”) 10700 10650 10560 10630 B Overall length of crawler 4950 (16’ 3”) 10690 10610 10430 10530
I Overall length I Overall length
D Tail swing radius 3200 (10’ 6”) (35’ 1”) (34’ 11”) (34’ 8”) (34’ 11”) C Ground clearance of counterweight 1500 (4’ 11”) (35’ 1”) (34’ 10”) (34’ 3”) (34’ 7”)
D’ Rear-end length 3120 (10’ 3”) Overall 3590 3470 3290 3500 D Tail swing radius 3200 (10’ 6”) Overall 3740 3590 3350 3510
J J
height of boom (12’ 3”) (11’ 9”) (11’ 0”) (11’ 6”)
E Overall width of upperstructure 2980 (9’ 9”) height of boom (11’ 9”) (11’ 5”) (10’ 10”) (11’ 6”) D’ Rear-end length 3120 (10’ 3”)
Type Triple grouser Triple grouser Triple grouser Double grouser
F Overall height of cab 3010 (9’ 11”) ᵀ600 700 800 900 E Overall width of upperstructure 2980 (9’ 9”) Track
K Track shoe width K ᵀ600 700 800 710
G Min. ground clearance 500 (1’ 8”) (24”) (28”) (32”) (36”) F Overall height of cab 3380 (11’ 1”) shoe Width
(24”) (28”) (32”) (28”)
R290LC-7A 2600 (8’ 6”) 3200 3300 3400 3500 G Min. ground clearance 765 (2’ 6”)
Track gauge R290LC-7A 3470 3570 3670 3580
H 2390 (7’ 10”) (10’ 6”) (10’ 10”) (11’ 2”) (11’ 6”) L Overall width
R290NLC-7A Overall H Track gauge 2870 (9’ 5”) (11’ 5”) (11’ 9”) (12’ 0”) (11’ 9”)
L
width 2990
R290NLC-7A - - -
(9’ 10”)
⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 3.05 m (10’ 0”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 800mm(32”) triple grouser with 5.2ton(11,460 lb) counterweight
Load radius At max. reach
Lifting capacities - R290LC-7A Rating over-front Rating over-side or 360 degree
1.5 m (5.0 ft) 3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft) Capacity Reach
Load point
height m(ft)
⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 2.50 m (8’ 2”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight m (ft)
⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 3.05 m (10’ 0”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight
⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 2.10 m (6’ 11”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight
⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 3.75 m (12’ 4”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight ⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 2.50 m (8’ 2”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight
NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket. NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load 4. (*) indicates load limited by hydraulic capacity. 2. Lifting capacity of the Robex Series does not exceed 75% of tipping load 4. (*) indicates load limited by hydraulic capacity.
with the machine on firm, level ground or 87% of full hydraulic capacity. with the machine on firm, level ground or 87% of full hydraulic capacity.
⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 3.05 m (10’ 0”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight ⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 3.05 m (10’ 0”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight
⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 3.75 m (12’ 4”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight
⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 3.75 m (12’ 4”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight
Lifting capacities - R290LC-7A High Chassis Rating over-front Rating over-side or 360 degree ⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 3.05 m (10’ 0”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 800mm(32”) triple grouser with 5.2ton(11,460 lb) counterweight
Load radius At max. reach
1.5 m (5.0 ft) 3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft) Capacity Reach
⍨Boom: 6.25 m (20’ 6”) ⍨Arm: 2.50 m (8’ 2”) ⍨Bucket: 1.27 m3 SAE heaped ⍨Shoe : 600mm(24”) triple grouser with 5.2ton(11,460 lb) counterweight Load point
height m(ft)
m (ft)